MIBs Depot

ADVA-MIB

Registered at
1.3.6.1.4.1.2544
Last updated
2018-12-14 00:00
Organization
ADVA AG Optical Networking
Revisions
2018-12-14 00:00, 2017-12-07 00:00, 2017-03-23 00:00, 2016-04-01 00:00, 2015-12-10 00:00, 2015-09-03 00:00, 2015-03-20 00:00, 2014-09-29 00:00, 2012-02-07 00:00, 2008-02-21 00:00, 2004-12-14 00:00, 2004-02-20 00:00, 2003-12-12 00:00, 2003-10-07 00:00, 2003-06-27 00:00, 2002-07-22 00:00
Namespace
adva
Source file
ADVA-MIB
Digest
sha256:a623c4fcf0d620a3f3047648a9e120455b1e61c52359e5b1b75abfd1a3756e5d

Description

The ADVA Optical Networking base MIB.

Contact

ADVA AG Optical Networking Justus-von-Liebig-Str. 7 12489 Berlin, Germany Support Europe: Phone: +49 89 89 0665 848 Fax: +49 89 89 0665 22848 e-mail: support@advaoptical.com Support USA: Phone: +1 201 995 0080 Fax: +1 201 995 0081 e-mail: support-usa@advaoptical.com Support Asia: Phone: +81 3 5408 5891 Fax: +81 3 5408 5899 e-mail: support-asia@advaoptical.com

Imports

FromSymbols
ENTITY-MIBentPhysicalIndex
IF-MIBifIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, mib-2, snmpModules
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TestAndIncr, TimeStamp

Imported by

49 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADVA-MIB
ENTITY-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.2544.1products

Textual conventions

NameOIDSyntaxAccessStatus
ApsDirection
TEXTUAL-CONVENTION
Bi-Directional | Unidirectional setup used in protection setup: Not to be used by others
current
ApsDirectionCaps
TEXTUAL-CONVENTION
Bi-Directional | Unidirectional setup used in protection setup: Not to be used by others
current
ApsHoldoffTime
TEXTUAL-CONVENTION
Soak period before switch after trigger.
current
ApsHoldoffTimeCaps
TEXTUAL-CONVENTION
Soak period before switch after trigger.
current
ArcState
TEXTUAL-CONVENTION
Variable for representing the Alarm Report Control (ARC) state for an entity.
current
AssignmentState
TEXTUAL-CONVENTION
Assignment State. Describes an entity' state.
current
AvailState
TEXTUAL-CONVENTION
Variable for representing availability state and is for general use.
current
BootState
TEXTUAL-CONVENTION
Boot State. Every state change (excluding IDLE) does generate a corresponding transient condition.
current
CommandEqpt
TEXTUAL-CONVENTION
Update, Install and Reboot commands.
current
Counter64String
TEXTUAL-CONVENTION
A string representation of a 64 bit counter. This TC is provided solely for SNMPv1 compliance.
current
CpWdmEntityClass
TEXTUAL-CONVENTION
Control Plane WDM Entity Class
current
DestinationNodeOrAgentState
TEXTUAL-CONVENTION
current
EnableState
TEXTUAL-CONVENTION
Describes whether a feature is enabled or disabled.
current
EnableStateCaps
TEXTUAL-CONVENTION
Usage of 3rd Party Plugs
current
EntityClass
TEXTUAL-CONVENTION
Entity Class
current
EntityIndex
TEXTUAL-CONVENTION
The index of an entity. EntityIndex is used to index the following: Entities which are provisioned but unequipped (existing in the database but not physically present), Entities which are equipped but non-provisioned (physically present but not in the database), Entities which are both provisioned and equipped (existing in the database and physically present), Entities which are non-provisioned and unequipped (not existing in the database and not physically present). These will have an entry in the entityTable, but their EntityType will be undefined. The EntityIndex is used similarly to how the entPhysicalIndex in RFC2737 (Entity MIB) is used to address entities and containers of entities.
current
EntityType
TEXTUAL-CONVENTION
Identifies the entity type. Each NE may have their own use of this INTEGER value, which will defined in the conformance document for each individual NE MIB.
current
EquipmentState
TEXTUAL-CONVENTION
current
EthDuplexMode
TEXTUAL-CONVENTION
Duplex Mode (provision), available when Auto Negoiation is Disable (AUTONEG=DISABLE)
current
EthDuplexModeCaps
TEXTUAL-CONVENTION
Duplex Mode (provision), available when Auto Negoiation is Disable (AUTONEG=DISABLE)
current
F7AutoBackupInterval
TEXTUAL-CONVENTION
Scheduled Database Backup Interval
current
F7AutoBackupRunState
TEXTUAL-CONVENTION
current
F7FileTimeStamp
TEXTUAL-CONVENTION
Add Timestamp to File Name
current
FileArea
TEXTUAL-CONVENTION
Type of Area
current
FileTransferProtocol
TEXTUAL-CONVENTION
The protocol used for a file transfer.
current
FileType
TEXTUAL-CONVENTION
Type of File
current
FspDate
TEXTUAL-CONVENTION
A date specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 * Notes: - the value of year is in network-byte order For example, Tuesday May 26, 1992 would be displayed as: 1992-5-26
current
FspR7AdminStateSnmpProxy
TEXTUAL-CONVENTION
Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted.
current
FspR7AdminStateSnmpProxyCaps
TEXTUAL-CONVENTION
Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted.
current
FspR7Date
TEXTUAL-CONVENTION
A date specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 * Notes: - the value of year is in network-byte order For example, Tuesday May 26, 1992 would be displayed as: 1992-5-26
current
FspR7EnableDisable
TEXTUAL-CONVENTION
Enable/Disable variable.
current
FspR7EquipmentType
TEXTUAL-CONVENTION
The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)
current
FspR7EquipmentTypeCaps
TEXTUAL-CONVENTION
The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)
current
FspR7FalseTrue
TEXTUAL-CONVENTION
False True variable.
current
FspR7Time
TEXTUAL-CONVENTION
A time specification. field octets contents range ----- ------ -------- ----- 1 1 hour 0..23 2 2 minutes 0..59 3 3 seconds 0..60 (use 60 for leap-second) For example: 13-10-26
current
FspR7TrapsinkLifetime
TEXTUAL-CONVENTION
Lifetime of Trapsink
current
FspR7UsersDb
TEXTUAL-CONVENTION
Specifies how user accounts are handled for database operations
current
FspR7YesNo
TEXTUAL-CONVENTION
YesNo variable.
current
FspTime
TEXTUAL-CONVENTION
A time specification. field octets contents range ----- ------ -------- ----- 1 1 hour 0..23 2 2 minutes 0..59 3 3 seconds 0..60 (use 60 for leap-second) For example: 13-10-26
current
Grade
TEXTUAL-CONVENTION
Used to distinguish between NCU capabilities (range of supported services or applications)
current
IdentityTranslation
TEXTUAL-CONVENTION
Translation of an index (entPhysicalIndex, ifIndex etc.) to a string. Slot/Module/Port location (product specific notation) Service/Bundle Name If no index available a string with: IP address (for neTrapsinkTable etc.) If nothing appropriate available zero length string Further info in product documentation.
current
KBytes
TEXTUAL-CONVENTION
A memory size, expressed in units of 1024 bytes.
current
LogicalIfTransport
TEXTUAL-CONVENTION
current
LogicalIfTransportCaps
TEXTUAL-CONVENTION
current
LoopConfig
TEXTUAL-CONVENTION
External or Facility Loopback
current
LoopConfigCaps
TEXTUAL-CONVENTION
External or Facility Loopback
current
ModuleForm
TEXTUAL-CONVENTION
Form of module
current
NcuAutoActivation
TEXTUAL-CONVENTION
Enable scheduled activation of the standby PGM partition.
current
NeSwInstallStatusType
TEXTUAL-CONVENTION
Software installation status.
current
NeSwUpgradeStatusType
TEXTUAL-CONVENTION
The status of a NE software upgrade command. The states 2 - 7 and 15, 18-29 are only used when the NE is used as FTP client. States from 30 to 36 are used for reporting the installation failure in case of revised F7 upgrade procedure, 37-28 are introduce for F7 schedule backup.
current
NoYesNA
TEXTUAL-CONVENTION
Enumerator values no(1), yes(2), notApplicable(3).
current
OhTerminationLevel
TEXTUAL-CONVENTION
Highest signal level hardware removes then generates for transmission.
current
OhTerminationLevelCaps
TEXTUAL-CONVENTION
Highest signal level hardware removes then generates for transmission.
current
OnOff
TEXTUAL-CONVENTION
Variable for representing a state and is for general use.
current
OtnPayloadType
TEXTUAL-CONVENTION
The PAYLOAD defines the transport service type of the payload
current
OtnPayloadTypeCaps
TEXTUAL-CONVENTION
The PAYLOAD defines the transport service type of the payload
current
OtnTcmLevel
TEXTUAL-CONVENTION
Activation of Tandem Connection Monitoring Instance A. 6 Tandem Connection Monitoring levels are available.
current
OtnTcmLevelCaps
TEXTUAL-CONVENTION
Activation of Tandem Connection Monitoring Instance A. 6 Tandem Connection Monitoring levels are available.
current
PartitionStatus
TEXTUAL-CONVENTION
Partition State
current
PgmType
TEXTUAL-CONVENTION
Program Type
current
ProtectionMech
TEXTUAL-CONVENTION
Port Based refers to HST Cards and Switches: Card Based refers to additional equipment protection
current
ProtectionMechCaps
TEXTUAL-CONVENTION
Port Based refers to HST Cards and Switches: Card Based refers to additional equipment protection
current
RestoreActivation
TEXTUAL-CONVENTION
Shows whether the last activation was(will be) a database restore or a new software activation
current
RestoreActivationCaps
TEXTUAL-CONVENTION
Shows whether the last activation was(will be) a database restore or a new software activation
current
ServiceAffecting
TEXTUAL-CONVENTION
Service Affecting Change during FWP upgrade and Restart operation
current
ServiceAffectingCaps
TEXTUAL-CONVENTION
Service Affecting Change during FWP upgrade and Restart operation
current
ServiceImpairment
TEXTUAL-CONVENTION
This object identifies the potential service impairment of an alarm.
current
SnmpProxySynchronizationStage
TEXTUAL-CONVENTION
This parameter is used to indicate stage of synchronization process.
current
SnmpProxySynchronizationState
TEXTUAL-CONVENTION
This parameter is used to synchronize proxy table on GNE with destination NE's availability.
current
SonetSectSigDegThres
TEXTUAL-CONVENTION
The SONET signal degrade threshold as a bit error rate.
current
SonetSectSigDegThresCaps
TEXTUAL-CONVENTION
The SONET signal degrade threshold as a bit error rate.
current
SonetTimingSource
TEXTUAL-CONVENTION
Interface Timing Source Selection
current
SonetTimingSourceCaps
TEXTUAL-CONVENTION
Interface Timing Source Selection
current
SonetTraceForm
TEXTUAL-CONVENTION
Byte-Length of Trace Compared to Expected
current
SonetTraceFormCaps
TEXTUAL-CONVENTION
Byte-Length of Trace Compared to Expected
current
SonetVcBundleAllocation
TEXTUAL-CONVENTION
Each byte represents one sequence position in the VC bundle, always assigned consecutively. The sequence identifies the order in which the individual VCs are combined within the VC-4-Xv/VC-3-Xv. Each VC has a fixed unique sequence number in the range of 0 to (X-1): byte 0: VC4/VC3 transporting the first container of the VC-4-Xv/VC-3-Xv is assigned sequence number 0, byte 1: VC4/VC3 transporting the second container of the VC-4-Xv/VC-3-Xv is assigned sequence number 1, etc. byte (X-1): VC4/VC3 transporting container X of the VC-4-Xv/VC-3-Xv is assigned sequence number (X-1).
current
SonetVcBundleAllocationCaps
TEXTUAL-CONVENTION
Each bit set in the bitmask represents the number of a free VC. Bit 0 = VC #1, and so on.
current
SourceIpAddress
TEXTUAL-CONVENTION
IP address used as source IP address in FTP Client session
current
StandbyServiceAffecting
TEXTUAL-CONVENTION
Service Affecting Change during FWP upgrade after activation of STBY PGM partition.
current
TimMode
TEXTUAL-CONVENTION
OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect.
current
TimModeCaps
TEXTUAL-CONVENTION
OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect.
current
TrapAlarmSeverity
TEXTUAL-CONVENTION
This object identifies the severity of an alarm. The state 'cleared' is not a severity, but is used for reporting that an alarm condition is no longer present. The state 'notReported' is used for current alarms which are not reported because of ARC. The state 'indeterminate' is used when the severity value cannot be determined due to an internal error.
current
TrapCounter
TEXTUAL-CONVENTION
The sequence number of sent notifications (traps).
current
VirtualContainerType
TEXTUAL-CONVENTION
Virtual Container Group Type
current
VirtualContainerTypeCaps
TEXTUAL-CONVENTION
Virtual Container Group Type
current
YesNoNA
TEXTUAL-CONVENTION
Enumerator values yes(1), no(2), notApplicable(3).
current

Objects

NameOIDSyntaxAccessStatus
products
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1
fsp3000
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.4
fsp1000
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.6
fsp2000
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.7
fsp1000adm
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.8
fsp1500
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.9
fsp150
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.10
fspR7
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.11
fsp150cm
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12
fspNm
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.13
fsp3000alm
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.14
fsp3000c
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.15
aos
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.20
aosCommon
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.20.1
aosProducts
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.20.2
common
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2
neInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.1
neMibVariant
OBJECT-TYPE
The variant of the SNMP enterprise MIB. This object will together with sysObjectID [RFC1213] uniquely identify the revision and variant of the enterprise MIB used by the NE.
1.3.6.1.4.1.2544.2.1.1Integer32 (0..9999)read-onlycurrent
neManufacturer
OBJECT-TYPE
Manufacturer of the system. This value is used to present in clear text the manufacturer of the system.
1.3.6.1.4.1.2544.2.1.2SnmpAdminStringread-onlycurrent
neDateAndTime
OBJECT-TYPE
Reports the current local time on the Network Element. It also allows to set the local time. However, SET requests may not be supported by all products.
1.3.6.1.4.1.2544.2.1.3DateAndTimeread-writecurrent
neMemorySizeTotal
OBJECT-TYPE
The total amount of physical main memory contained in the NEMI.
1.3.6.1.4.1.2544.2.1.4KBytesread-onlycurrent
neMemorySizeFree
OBJECT-TYPE
The amount of unused physical main memory contained in the NEMI.
1.3.6.1.4.1.2544.2.1.5KBytesread-onlycurrent
neStorageTable
OBJECT-TYPE
The table of long-term storage partitions contained in the NE.
1.3.6.1.4.1.2544.2.1.6not-accessiblecurrent
neStorageEntry
OBJECT-TYPE
An entry for one long-term storage partition contained in the NE.
1.3.6.1.4.1.2544.2.1.6.1not-accessiblecurrent
neStorageIndex
OBJECT-TYPE
The index of the NE storage partition.
1.3.6.1.4.1.2544.2.1.6.1.1Unsigned32not-accessiblecurrent
neStorageDescr
OBJECT-TYPE
The product specific description of the NE storage partition.
1.3.6.1.4.1.2544.2.1.6.1.2SnmpAdminStringread-onlycurrent
neStorageCapacity
OBJECT-TYPE
The total capacity of the NE storage partition.
1.3.6.1.4.1.2544.2.1.6.1.3KBytesread-onlycurrent
neStorageAvailable
OBJECT-TYPE
The free space on the NE storage partition.
1.3.6.1.4.1.2544.2.1.6.1.4KBytesread-onlycurrent
neAlarmStatus
OBJECT-TYPE
The highest severity of all currently active alarms on the NE. Alarms that are not reported because of Alarm Report Control (ARC) or any other administrative state are not considered active. The values indeterminate(1) and notReported(7) are not applicable for this object. The value cleared(6) indicates that the NE reports no alarm (i.e. Alarm LED(s) off).
1.3.6.1.4.1.2544.2.1.7TrapAlarmSeverityread-onlycurrent
admin
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.2
snmpWriteAccessRestriction
OBJECT-TYPE
This value is used in combination with the snmpWriteAccessTable for additional security for SNMP set requests. When the status is Disabled, SNMP set requests from any NMS (using the correct write community) are accepted (ie, the snmpWriteAccessTable entries do not apply). When the status is Enabled, however, only SNMP set requests from NMSs (using the correct write community) which are listed in the snmpWriteAccessTable are accepted. This object is read-only, meaning that it cannot be updated via the SNMP interface. The operator must configure SNMP write access permissions via a non-SNMP interface.
1.3.6.1.4.1.2544.2.2.1EnableStateread-onlycurrent
snmpWriteAccessTable
OBJECT-TYPE
Table of authorized NMSs (identified by IP address) for SNMP set requests. This table is not relevant if snmpWriteAccessRestriction is set to Disabled. The entries of this table are read-only. This means that the SNMP write access permissions cannot be updated via the SNMP interface. The operator must configure them via a non-SNMP interface.
1.3.6.1.4.1.2544.2.2.2not-accessiblecurrent
snmpWriteAccessEntry
OBJECT-TYPE
Entries in the SNMP Write Access Table. The maximum of rows in this table is product specific, typically 10.
1.3.6.1.4.1.2544.2.2.2.1not-accessiblecurrent
snmpWriteAccessNmsAddress
OBJECT-TYPE
IP Address of the NMS which has SNMP write permission.
1.3.6.1.4.1.2544.2.2.2.1.1IpAddressnot-accessiblecurrent
snmpWriteAccessNmsName
OBJECT-TYPE
Name of the NMS.
1.3.6.1.4.1.2544.2.2.2.1.2SnmpAdminStringread-onlycurrent
events
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.3
neEventsLogged
OBJECT-TYPE
This value is the sum of all notified events (trap counter). It is also the event number of the most recent event (neEventLogIndex) found in the neEventLog tables. It can, for example, be used to check if a notification (trap) is lost. The value is reset to 0 after a cold start. The counter is increased even if no trap sinks are specified.
1.3.6.1.4.1.2544.2.3.1TrapCounterread-onlycurrent
neEventLogTable
OBJECT-TYPE
Table of events issued by the NE's SNMP agent. The eventLog entries are read-only.
1.3.6.1.4.1.2544.2.3.2not-accessiblecurrent
neEventLogEntry
OBJECT-TYPE
Entries in the neEventLog Table. Enterprise traps are always logged; logging of Generic traps is product specific.
1.3.6.1.4.1.2544.2.3.2.1not-accessiblecurrent
neEventLogIndex
OBJECT-TYPE
The associated neEventsLogged counter for the logged event (trap).
1.3.6.1.4.1.2544.2.3.2.1.1TrapCounternot-accessiblecurrent
neEventLogTimeStamp
OBJECT-TYPE
The NE Date and Time when the event (trap) occurred. This object is used in the trap varbind.
1.3.6.1.4.1.2544.2.3.2.1.2DateAndTimeread-onlycurrent
neEventLogNotificationOID
OBJECT-TYPE
The NOTIFICATION-TYPE object identifier of the event that occurred. The last part of the OID corresponds to the specific trap type value in the trap PDU.
1.3.6.1.4.1.2544.2.3.2.1.3OBJECT IDENTIFIERread-onlycurrent
neEventLogIdentityTranslation
OBJECT-TYPE
Translation of entPhysicalIndex/ifIndex or other identifier to a string used in the trap varbind following the timestamp varbind.
1.3.6.1.4.1.2544.2.3.2.1.4IdentityTranslationread-onlycurrent
neEventLogVarTable
OBJECT-TYPE
Table of variables corresponding to events logged in the neEventLog.
1.3.6.1.4.1.2544.2.3.3not-accessiblecurrent
neEventLogVarEntry
OBJECT-TYPE
Entries in the neEventLogVar Table. An entry appears in this table for each variable in the varbind list of an entry in the neEventLogTable. For an event having no variables, no entries are found in this table.
1.3.6.1.4.1.2544.2.3.3.1not-accessiblecurrent
neEventLogVarIndex
OBJECT-TYPE
A monotonically increasing integer, starting at 1 for a given neEventLogIndex, for indexing a variable contained in the varbind list of a logged event.
1.3.6.1.4.1.2544.2.3.3.1.1Unsigned32not-accessiblecurrent
neEventLogVarId
OBJECT-TYPE
The object identifier of the variable in the varbind list.
1.3.6.1.4.1.2544.2.3.3.1.2OBJECT IDENTIFIERread-onlycurrent
neEventLogVarType
OBJECT-TYPE
The type of variable. One and only one of the value objects that follow must be instantiated, based on this type. The used types depend on the enterprise traps defined for the specific product.
1.3.6.1.4.1.2544.2.3.3.1.3INTEGER {integer32(1), ipAddress(2), octetString(3), objectId(4), counter64(5), unsigned32(7)}read-onlycurrent
neEventLogVarInteger32Val
OBJECT-TYPE
The value when neEventLogVarType is 'integer32'. Integer32 is also used to represent INTEGER types. Otherwise, 0 is returned.
1.3.6.1.4.1.2544.2.3.3.1.4Integer32read-onlycurrent
neEventLogVarIpAddressVal
OBJECT-TYPE
The value when neEventLogVarType is 'ipAddress'. Otherwise, an empty address is returned.
1.3.6.1.4.1.2544.2.3.3.1.5IpAddressread-onlycurrent
neEventLogVarOctetStringVal
OBJECT-TYPE
The value when neEventLogVarType is 'octetString'. OctetString is used for all string types, including DisplayString, SnmpAdminString and DateAndTime. Otherwise, an empty string is returned.
1.3.6.1.4.1.2544.2.3.3.1.6OCTET STRING (SIZE(0..255))read-onlycurrent
neEventLogVarOidVal
OBJECT-TYPE
The value when neEventLogVarType is 'objectId'. Otherwise, an objectId { 0.0 } is returned.
1.3.6.1.4.1.2544.2.3.3.1.7OBJECT IDENTIFIERread-onlycurrent
neEventLogVarCounter64Val
OBJECT-TYPE
The value when neEventLogVarType is 'counter64'.
1.3.6.1.4.1.2544.2.3.3.1.8Counter64read-onlycurrent
neEventLogVarUnsigned32Val
OBJECT-TYPE
The value when neEventLogVarType is 'unsigned32'.
1.3.6.1.4.1.2544.2.3.3.1.10Unsigned32read-onlycurrent
neTrapsinkTable
OBJECT-TYPE
Table of Trapsinks. A neTrapsinkTable entry can be created, deleted or modified via the SNMP interface for a specific address and port.
1.3.6.1.4.1.2544.2.3.4not-accessiblecurrent
neTrapsinkEntry
OBJECT-TYPE
Entries in the Trapsink Table. Entries are created and deleted using the neTrapsinkRowStatus object. The maximum of rows in this table is product specific.
1.3.6.1.4.1.2544.2.3.4.1not-accessiblecurrent
neTrapsinkAddress
OBJECT-TYPE
IP Address of the Management System which should receive SNMP Traps.
1.3.6.1.4.1.2544.2.3.4.1.1IpAddressaccessible-for-notifycurrent
neTrapsinkPort
OBJECT-TYPE
The port number where the specified trap sink will receive SNMP traps.
1.3.6.1.4.1.2544.2.3.4.1.2Integer32 (0..65535)not-accessiblecurrent
neTrapsinkCommunity
OBJECT-TYPE
Community String which is sent with an SNMP Trap to the Management Station. If no community is specified, the default (public) is used.
1.3.6.1.4.1.2544.2.3.4.1.3DisplayString (SIZE(0..128))read-writecurrent
neTrapsinkRowStatus
OBJECT-TYPE
The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6).
1.3.6.1.4.1.2544.2.3.4.1.4RowStatusread-writecurrent
neTrapsinkVersion
OBJECT-TYPE
1.3.6.1.4.1.2544.2.3.4.1.5Unsigned32read-writecurrent
neTrapsinkUserName
OBJECT-TYPE
A human readable string representing the name of the user.
1.3.6.1.4.1.2544.2.3.4.1.6DisplayStringread-writecurrent
neTrapsinkType
OBJECT-TYPE
Lifetime of Trapsink.
1.3.6.1.4.1.2544.2.3.4.1.7FspR7TrapsinkLifetimeread-writecurrent
software
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.4
swVersionTable
OBJECT-TYPE
Software version information table for units/modules which run a management Operating System. This includes the Application software and Operating System software.
1.3.6.1.4.1.2544.2.4.1not-accessiblecurrent
swVersionEntry
OBJECT-TYPE
Entries in the swVersion Table.
1.3.6.1.4.1.2544.2.4.1.1not-accessiblecurrent
swVersionActiveApplSw
OBJECT-TYPE
Reports the active Application software version on the unit/module.
1.3.6.1.4.1.2544.2.4.1.1.1SnmpAdminStringread-onlycurrent
swVersionInactiveApplSw
OBJECT-TYPE
Reports the inactive Application software version available on the unit/module.
1.3.6.1.4.1.2544.2.4.1.1.2SnmpAdminStringread-onlycurrent
swVersionActiveOperatingSw
OBJECT-TYPE
Reports the active Operating System software version on the unit/module.
1.3.6.1.4.1.2544.2.4.1.1.3SnmpAdminStringread-onlycurrent
swVersionInactiveOperatingSw
OBJECT-TYPE
Reports the inactive Operating System software version available on the unit/module.
1.3.6.1.4.1.2544.2.4.1.1.4SnmpAdminStringread-onlycurrent
swVersionNextBoot
OBJECT-TYPE
Reports which software will be run at next boot, either the currently active one again or the alternative (currently inactive) one.
1.3.6.1.4.1.2544.2.4.1.1.5INTEGER {activeVersion(1), inactiveVersion(2)}read-onlycurrent
neSoftwareUpgrade
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.4.2
neSwUpgradeRequest
OBJECT-TYPE
The request to the software upgrade function. Request 2..6 are single step requests while requests 7..9 are batch commands for common upgrade scenarios. Requests 13,14 are defined for automatic install process for F7 platform. If the NE is the FTP server, the file must then have been downloaded to the neSwUpgradeNeDirectory on the NE using the 'netadmin' account.
1.3.6.1.4.1.2544.2.4.2.1INTEGER {none(1), download(2), install(3), activate(4), revertToPrevious(5), reboot(6), downloadInstallActivateReboot(7), installActivateReboot(8), revertToPreviousReboot(9), activateAlp(10), activateDefaultAlp(11), upload(12), autoDownloadInstall(13), autoInstall(14), fwpInstall(15), fwpDownloadInstall(16), downloadCf(17), uploadCf(18), installCf(19), autoInstallCf(20), uploadPa(21), activateWithFwp(22), forceReboot(23), stbyFwpInstall(24)}read-writecurrent
neSwUpgradeState
OBJECT-TYPE
The current status of the SW upgrade process. NOTE: All failures that are caused by malfunctioning hardware are reported as internalError(17).
1.3.6.1.4.1.2544.2.4.2.2NeSwUpgradeStatusTyperead-onlycurrent
neSwUpgradeServerAddress
OBJECT-TYPE
The IP address of the external FTP server.
1.3.6.1.4.1.2544.2.4.2.3IpAddressread-writecurrent
neSwUpgradeServerLogin
OBJECT-TYPE
The login name on the external FTP server.
1.3.6.1.4.1.2544.2.4.2.4SnmpAdminStringread-writecurrent
neSwUpgradeServerPasswd
OBJECT-TYPE
The password on the external FTP server. Read requests on this object will return a zero-length string.
1.3.6.1.4.1.2544.2.4.2.5SnmpAdminStringread-writecurrent
neSwUpgradeServerDirectory
OBJECT-TYPE
The SW file location (path) on the external FTP server.
1.3.6.1.4.1.2544.2.4.2.6SnmpAdminStringread-writecurrent
neSwUpgradeFileName
OBJECT-TYPE
The SW file name (without path) on the external FTP server or the name of the file which has been downloaded to the NE.
1.3.6.1.4.1.2544.2.4.2.7SnmpAdminStringread-writecurrent
neSwUpgradeNeDirectory
OBJECT-TYPE
The SW file location (path) on the NE.
1.3.6.1.4.1.2544.2.4.2.8SnmpAdminStringread-onlycurrent
neSwUpgradeTransferProtocol
OBJECT-TYPE
The transfer protocol to be used.
1.3.6.1.4.1.2544.2.4.2.9FileTransferProtocolread-writecurrent
sourceIpAddress
OBJECT-TYPE
IP address used as source IP address in FTP Client session
1.3.6.1.4.1.2544.2.4.2.10SourceIpAddressread-writecurrent
neSwInstallState
OBJECT-TYPE
Software installation state.
1.3.6.1.4.1.2544.2.4.2.11NeSwInstallStatusTyperead-onlycurrent
neSwUpgradeType
OBJECT-TYPE
Required procedure type to be used for software download. legacy(1) is the default value. This parameter MUST be set before any other parameters will be set for software upgrade procedure (for example IP address, user name, password etc.). revised(2) value corresponds to Revised Upgrade Procedure which uses new PGM format. This parameter is NOT stored in the database and will be reset to default after SNMP Agent restart.
1.3.6.1.4.1.2544.2.4.2.12INTEGER {undefined(0), legacy(1), revised(2)}read-writecurrent
neSwDownloadProgress
OBJECT-TYPE
Operational progress in % i.e. file transfer
1.3.6.1.4.1.2544.2.4.2.13Integer32 (0..100 | -2147483648)not-accessiblecurrent
neSwUpgradeCommonIpSrv
OBJECT-TYPE
IPv4/v6 Server Address
1.3.6.1.4.1.2544.2.4.2.14SnmpAdminStringread-writecurrent
config
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5
provContainerTable
OBJECT-TYPE
This table defines the objects that support provisioning of 'container' class physical entities. Provisioning sets up a 'container' to hold a specified physical entity. This allows a management client to configure the specified physical entity, including all of its subordinates physical entities, before installation. Provisioning allows the network manager to 'create' the physical entities that represent the new modules. In essence, the device simulates the installation of the new modules into the system. This has the effect of creating all conceptual rows in all the necessary tables that support the physical entity and all its subordinate physical entities (e.g., entPhysicalTable, and ifTable). The table extends some entries in the entPhysicalTable (see ENTITY-MIB for further details). A entry appears in this table for a physical entity matching the following criteria: 1) Its entPhysicalClass object has a value of 'container'; 2) It can contain one (but not multiple) physical entity; and, 3) It supports provisioning. The following states cause an alarm to be raised at the level of the containing module: IF provAssignmentState = assigned(1) AND provEquipmentState = unequipped(2) THEN 'eqMissing' alarm IF provEquipmentState = invalid(3) THEN 'eqNotAccepted' alarm
1.3.6.1.4.1.2544.2.5.1not-accessiblecurrent
provContainerEntry
OBJECT-TYPE
Entries in the provContainer Table.
1.3.6.1.4.1.2544.2.5.1.1not-accessiblecurrent
provAssignmentState
OBJECT-TYPE
This status indicates the assignment (provisioning) of a module type to the container.
1.3.6.1.4.1.2544.2.5.1.1.1INTEGER {assigned(1), unassigned(2)}read-onlycurrent
provEquipmentState
OBJECT-TYPE
This status indicates how the container is equipped: 'equipped' The container holds a module that fits to the container. 'unequipped' The container does not hold any hardware. 'invalid' The container holds a recognized module that the container is not capable of supporting, or the container holds an unrecognized module.
1.3.6.1.4.1.2544.2.5.1.1.2INTEGER {equipped(1), unequipped(2), invalid(3)}read-onlycurrent
neBackupRestore
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.2
neBackupRestoreRequest
OBJECT-TYPE
Run network element configuration Backup/Restore operation: - none(1): No action (read only) - runBackup(2): Save the network element configuration to a file (write only) - runRestore(3): Restore the network element configuration from a file (write only) The Restore operation does not overwrite settings which are required to reestablish contact to the NE via SNMP and Telnet.
1.3.6.1.4.1.2544.2.5.2.1INTEGER {none(1), runBackup(2), runRestore(3), dBdownload(4), dBupload(5), dbDownloadScu(6), dbUploadScu(7), alpDownload(8), alpUpload(9), runBackupScu(10)}read-writecurrent
neBackupRestoreState
OBJECT-TYPE
The status of the current NE configuration backup/restore operation activated by 'neBackupRestoreRequest'.
1.3.6.1.4.1.2544.2.5.2.2INTEGER {noBackupAvailable(1), backupInProgress(2), backupAvailable(3), restoreInProgress(4), backupRestoreFail(5), backupRestoreIdle(6), backupRestoreCompleted(7), dbActivationFailed(8), dbActivationInProgress(9)}read-onlycurrent
neBackupRestoreFile
OBJECT-TYPE
The full local path of the network element configuration backup file. This file is generated during the Backup operation and is also used for the Restore operation.
1.3.6.1.4.1.2544.2.5.2.3SnmpAdminStringread-onlycurrent
neRestoreFileBackupDate
OBJECT-TYPE
The backup time of the current file to be used for Restore. If no backup is available, this object reports 8 zero-octets.
1.3.6.1.4.1.2544.2.5.2.4DateAndTimeread-onlycurrent
neF7AutomaticRemoteBackupSrvIp
OBJECT-TYPE
Remote server IP as a backup destination address.
1.3.6.1.4.1.2544.2.5.2.5IpAddressread-writecurrent
neF7AutomaticRemoteBackupSrvDir
OBJECT-TYPE
Remote server directory.
1.3.6.1.4.1.2544.2.5.2.6SnmpAdminStringread-writecurrent
neF7AutomaticRemoteBackupSrvLogin
OBJECT-TYPE
Remote user login.
1.3.6.1.4.1.2544.2.5.2.7SnmpAdminStringread-writecurrent
neF7AutomaticRemoteBackupSrvPass
OBJECT-TYPE
Remote user password.
1.3.6.1.4.1.2544.2.5.2.8SnmpAdminStringread-writecurrent
neF7AutomaticRemoteBackupProtocol
OBJECT-TYPE
Connection protocol to be used for remote backup.
1.3.6.1.4.1.2544.2.5.2.10FileTransferProtocolread-writecurrent
neF7AutomaticRemoteBackupSrcIp
OBJECT-TYPE
Source IP address to be used for remote backup.
1.3.6.1.4.1.2544.2.5.2.11SourceIpAddressread-writecurrent
neF7AutomaticRemoteBackupTimeStamp
OBJECT-TYPE
Add or omit the time stamp in the backuped filename.
1.3.6.1.4.1.2544.2.5.2.12F7FileTimeStampread-writedeprecated
neF7AutomaticRemoteBackupCommonIpSrv
OBJECT-TYPE
Remote server IPv4/IPv6 as a backup destination address.
1.3.6.1.4.1.2544.2.5.2.13SnmpAdminStringread-writecurrent
neF7AutomaticBackupTable
OBJECT-TYPE
Table releated to SCU/Remote backup.
1.3.6.1.4.1.2544.2.5.2.20not-accessiblecurrent
neF7AutomaticBackupEntry
OBJECT-TYPE
Entry releated to SCU/Remote backup.
1.3.6.1.4.1.2544.2.5.2.20.1not-accessiblecurrent
neF7AutomaticBackupIndex
OBJECT-TYPE
Index of the backup entity. May be the Backup SCU entity index or Backup Remote entity index.
1.3.6.1.4.1.2544.2.5.2.20.1.1EntityIndexnot-accessiblecurrent
neF7AutomaticBackupInterval
OBJECT-TYPE
Schedule database backup interval.
1.3.6.1.4.1.2544.2.5.2.20.1.2F7AutoBackupIntervalread-writecurrent
neF7AutomaticBackupStartDate
OBJECT-TYPE
Schedule database backup start date.
1.3.6.1.4.1.2544.2.5.2.20.1.3FspDateread-writecurrent
neF7AutomaticBackupStartTime
OBJECT-TYPE
Schedule database backup start time.
1.3.6.1.4.1.2544.2.5.2.20.1.4FspTimeread-writecurrent
neF7AutomaticBackupNextDate
OBJECT-TYPE
Next schedule database backup date.
1.3.6.1.4.1.2544.2.5.2.20.1.5FspDateread-onlycurrent
neF7AutomaticBackupRunState
OBJECT-TYPE
Automatic Backup running state.
1.3.6.1.4.1.2544.2.5.2.20.1.6F7AutoBackupRunStateread-writecurrent
neF7AutomaticBackupTimeStamp
OBJECT-TYPE
Add or omit the time stamp in the backuped filename.
1.3.6.1.4.1.2544.2.5.2.20.1.7F7FileTimeStampread-writecurrent
neAutoBackup
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.3
neAutoBackupConfig
OBJECT-TYPE
The configuration of the regular network element configuration Backup/Restore: - disabled(1): No regular backup - autoBackup(2): Regular backup to a local file is active - autoBackupAndUpload(3): Regular backup and upload to external FTP server is active The default is autoBackup(2). If this object is not disabled(1) all other auto-backup objects are read-only. I.e., all neAutoBackupServerXxx objects must be set before changing this object to autoBackupAndUpload(3).
1.3.6.1.4.1.2544.2.5.3.1INTEGER {disabled(1), autoBackup(2), autoBackupAndUpload(3)}read-writecurrent
neAutoBackupInterval
OBJECT-TYPE
The interval between two subsequent backup actions in hours (default: 24 hours).
1.3.6.1.4.1.2544.2.5.3.2Unsigned32read-writecurrent
neAutoBackupNextActionAt
OBJECT-TYPE
The sliding time of the next backup action (default: midnight local NE time).
1.3.6.1.4.1.2544.2.5.3.3DateAndTimeread-writecurrent
neAutoBackupServerAddress
OBJECT-TYPE
The IP address of the external FTP server for backup files.
1.3.6.1.4.1.2544.2.5.3.4IpAddressread-writecurrent
neAutoBackupServerLogin
OBJECT-TYPE
The login name on the external FTP server for backup files.
1.3.6.1.4.1.2544.2.5.3.5SnmpAdminStringread-writecurrent
neAutoBackupServerPasswd
OBJECT-TYPE
The password on the external FTP server for backup files. Read requests on this object will return a zero-length string.
1.3.6.1.4.1.2544.2.5.3.6SnmpAdminStringread-writecurrent
neAutoBackupServerDirectory
OBJECT-TYPE
The directory on the external FTP server to which the backup files will be uploaded. The file name will be generated automatically (containing NE IP addres and backup time).
1.3.6.1.4.1.2544.2.5.3.7SnmpAdminStringread-writecurrent
transportStandards
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.4
sonet
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.4.1
sonetConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.4.1.1
sonetSectionConfigTable
OBJECT-TYPE
Contains entries for the configuration of SONET interfaces. In the naming of parameters, only sonet (and not sdh) is used for simplification. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.1.1.1not-accessiblecurrent
sonetSectionConfigEntry
OBJECT-TYPE
SDH/SONET interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.1.1.1.1not-accessiblecurrent
sonetSectionConfigTimingSource
OBJECT-TYPE
The SDH/SONET timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation) - loopTiming: used in point-to-point via SDH network and feeder topologies. The default is internal(1).
1.3.6.1.4.1.2544.2.5.4.1.1.1.1.1SonetTimingSourceread-writecurrent
sonetSectionConfigSignalDegradeThreshhold
OBJECT-TYPE
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-RS).
1.3.6.1.4.1.2544.2.5.4.1.1.1.1.2Unsigned32 (1..100 | 4294967295)read-writecurrent
sonetSectionConfigSignalDegradePeriod
OBJECT-TYPE
The measurement period in seconds used together with the sonetSectionConfigSignalDegradeThreshold based on the block error counting method. The valid range is 2..10, The default being 7.
1.3.6.1.4.1.2544.2.5.4.1.1.1.1.3Unsigned32 (2..10 | 4294967295)read-writecurrent
sonetSectionConfigTraceForm
OBJECT-TYPE
Byte-Length of Trace Compared to Expected
1.3.6.1.4.1.2544.2.5.4.1.1.1.1.4SonetTraceFormread-writecurrent
sonetSectionConfigTraceExpected
OBJECT-TYPE
Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made.
1.3.6.1.4.1.2544.2.5.4.1.1.1.1.5OCTET STRING (SIZE(0..62))read-writecurrent
sonetSectionConfigTraceTransmit
OBJECT-TYPE
Sec/RS Trace to be Transmitted
1.3.6.1.4.1.2544.2.5.4.1.1.1.1.6OCTET STRING (SIZE(0..62))read-writecurrent
sonetSectionConfigTimMode
OBJECT-TYPE
SONET Section Trace Identifier Mismatch (TIM) detection/action for TIM defect.
1.3.6.1.4.1.2544.2.5.4.1.1.1.1.7TimModeread-writecurrent
sonetSectionDataTable
OBJECT-TYPE
Contains entries for the status of SONET interfaces. In the naming of parameters, only sonet (and not sdh) is used for simplification. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.1.1.3not-accessiblecurrent
sonetSectionDataEntry
OBJECT-TYPE
SDH/SONET interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.1.1.3.1not-accessiblecurrent
sonetSectionDataTraceReceived
OBJECT-TYPE
The received Sec/RS Trace
1.3.6.1.4.1.2544.2.5.4.1.1.3.1.1OCTET STRING (SIZE(0..62))read-onlycurrent
otn
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.4.2
otuConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.4.2.1
otuSectionConfigTable
OBJECT-TYPE
Contains entries for the configuration of OTU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.1.1not-accessiblecurrent
otuSectionConfigEntry
OBJECT-TYPE
OTU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.1.1.1not-accessiblecurrent
otuSectionConfigSignalDegradeThreshold
OBJECT-TYPE
Threshold for OTU SM-SD alarm (threshold level 0..100%, default value 15 %). Ref. table 24/G.7710.
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.1Integer32 (1..100 | -2147483648)read-writecurrent
otuSectionConfigSignalDegradePeriod
OBJECT-TYPE
Measuring period for OTU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.2Unsigned32 (2..10 | 4294967295)read-writecurrent
otuSectionConfigPayload
OBJECT-TYPE
The payload of the interface (inside a transport overhead). Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.3OtnPayloadTyperead-writecurrent
otuSectionConfigStuffing
OBJECT-TYPE
Indicates if bit/byte stuffing is used in the transport signal.
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.4EnableStateread-writecurrent
otuSectionConfigTraceExpected
OBJECT-TYPE
Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made.
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.5OCTET STRING (SIZE(0..15))read-writecurrent
otuSectionConfigTraceTransmitSapi
OBJECT-TYPE
The transmitted SAPI part of the OTU trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.6OCTET STRING (SIZE(0..15))read-writecurrent
otuSectionConfigTraceTransmitDapi
OBJECT-TYPE
The transmitted DAPI part of the OTU trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.7OCTET STRING (SIZE(0..15))read-writecurrent
otuSectionConfigTraceTransmitOpsp
OBJECT-TYPE
The transmitted Operator Specific part of the OTU trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.8OCTET STRING (SIZE(0..32))read-writecurrent
otuSectionConfigTimMode
OBJECT-TYPE
OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect.
1.3.6.1.4.1.2544.2.5.4.2.1.1.1.9TimModeread-writecurrent
otuSectionDataTable
OBJECT-TYPE
Contains entries for the status of OTU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.1.2not-accessiblecurrent
otuSectionDataEntry
OBJECT-TYPE
OTU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.1.2.1not-accessiblecurrent
otuSectionDataResultingTotalBitrate
OBJECT-TYPE
This interface bitrate is dependent on the type and the payload of the interface. Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.
1.3.6.1.4.1.2544.2.5.4.2.1.2.1.1Unsigned32read-onlycurrent
otuSectionDataTraceReceivedSapi
OBJECT-TYPE
The received SAPI part of the OTU trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.1.2.1.2OCTET STRING (SIZE(0..15))read-onlycurrent
otuSectionDataTraceReceivedDapi
OBJECT-TYPE
The received DAPI part of the OTU trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.1.2.1.3OCTET STRING (SIZE(0..15))read-onlycurrent
otuSectionDataTraceReceivedOpsp
OBJECT-TYPE
The received Operator Specific part of the OTU trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.1.2.1.4OCTET STRING (SIZE(0..32))read-onlycurrent
oduConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.4.2.2
oduSectionConfigTable
OBJECT-TYPE
Contains entries for the configuration of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.2.1not-accessiblecurrent
oduSectionConfigEntry
OBJECT-TYPE
ODU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.2.1.1not-accessiblecurrent
oduSectionConfigSignalDegradeThres
OBJECT-TYPE
Threshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %. Ref. table 24/G.7710.
1.3.6.1.4.1.2544.2.5.4.2.2.1.1.1Integer32 (1..100 | -2147483648)read-writecurrent
oduSectionConfigSignalDegradePeriod
OBJECT-TYPE
Measuring period for ODU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.
1.3.6.1.4.1.2544.2.5.4.2.2.1.1.2Unsigned32 (2..10 | 4294967295)read-writecurrent
oduSectionConfigTraceExpected
OBJECT-TYPE
Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made.
1.3.6.1.4.1.2544.2.5.4.2.2.1.1.3OCTET STRING (SIZE(0..15))read-writecurrent
oduSectionConfigTraceTransmitSapi
OBJECT-TYPE
The transmitted SAPI part of the ODU trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.1.1.4OCTET STRING (SIZE(0..15))read-writecurrent
oduSectionConfigTraceTransmitDapi
OBJECT-TYPE
The transmitted DAPI part of the ODU trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.1.1.5OCTET STRING (SIZE(0..15))read-writecurrent
oduSectionConfigTraceTransmitOpsp
OBJECT-TYPE
The transmitted Operator Specific part of the ODU trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.2.1.1.6OCTET STRING (SIZE(0..32))read-writecurrent
oduSectionConfigTimMode
OBJECT-TYPE
Detection of TIM-ODU Condition can be configured
1.3.6.1.4.1.2544.2.5.4.2.2.1.1.7TimModeread-writecurrent
oduSectionDataTable
OBJECT-TYPE
Contains entries for the status of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.2.2not-accessiblecurrent
oduSectionDataEntry
OBJECT-TYPE
ODU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.2.2.1not-accessiblecurrent
oduSectionDataTraceReceivedSapi
OBJECT-TYPE
The received SAPI part of the ODU trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.2.1.1OCTET STRING (SIZE(0..15))read-onlycurrent
oduSectionDataTraceReceivedDapi
OBJECT-TYPE
The received DAPI part of the ODU trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.2.1.2OCTET STRING (SIZE(0..15))read-onlycurrent
oduSectionDataTraceReceivedOpsp
OBJECT-TYPE
The received Operator Specific part of the ODU trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.2.2.1.3OCTET STRING (SIZE(0..32))read-onlycurrent
oduTcmAConfigTable
OBJECT-TYPE
Contains entries for the configuration of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.2.3not-accessiblecurrent
oduTcmAConfigEntry
OBJECT-TYPE
ODU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.2.3.1not-accessiblecurrent
oduTcmAConfigSignalDegradeThreshold
OBJECT-TYPE
Threshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). Ref. table 24/G.7710.
1.3.6.1.4.1.2544.2.5.4.2.2.3.1.1Integer32 (1..100 | -2147483648)read-writecurrent
oduTcmAConfigSignalDegradePeriod
OBJECT-TYPE
Measuring period for ODU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.
1.3.6.1.4.1.2544.2.5.4.2.2.3.1.2Unsigned32 (2..10 | 4294967295)read-writecurrent
oduTcmAConfigTcmLevel
OBJECT-TYPE
Activation of Tandem Connection Monitoring Instance A
1.3.6.1.4.1.2544.2.5.4.2.2.3.1.3OtnTcmLevelread-writecurrent
oduTcmAConfigTraceExpected
OBJECT-TYPE
Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
1.3.6.1.4.1.2544.2.5.4.2.2.3.1.4OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmAConfigTraceTransmitSapi
OBJECT-TYPE
The transmitted SAPI part of the TCMA trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.3.1.5OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmAConfigTraceTransmitDapi
OBJECT-TYPE
The transmitted DAPI part of the TCMA trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.3.1.6OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmAConfigTraceTransmitOpsp
OBJECT-TYPE
The transmitted Operator Specific part of the TCMA trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.2.3.1.7OCTET STRING (SIZE(0..32))read-writecurrent
oduTcmAConfigTimMode
OBJECT-TYPE
TCM_A Trace Identifier Mismatch (TIM) detection/action for TIM defect.
1.3.6.1.4.1.2544.2.5.4.2.2.3.1.8TimModeread-writecurrent
oduTcmBConfigTable
OBJECT-TYPE
Contains entries for the configuration of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.2.4not-accessiblecurrent
oduTcmBConfigEntry
OBJECT-TYPE
ODU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.2.4.1not-accessiblecurrent
oduTcmBConfigSignalDegradeThreshold
OBJECT-TYPE
Threshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). Ref. table 24/G.7710.
1.3.6.1.4.1.2544.2.5.4.2.2.4.1.1Integer32 (1..100 | -2147483648)read-writecurrent
oduTcmBConfigSignalDegradePeriod
OBJECT-TYPE
Measuring period for ODU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.
1.3.6.1.4.1.2544.2.5.4.2.2.4.1.2Unsigned32 (2..10 | 4294967295)read-writecurrent
oduTcmBConfigTcmLevel
OBJECT-TYPE
Activation of Tandem Connection Monitoring Instance B
1.3.6.1.4.1.2544.2.5.4.2.2.4.1.3OtnTcmLevelread-writecurrent
oduTcmBConfigTraceExpected
OBJECT-TYPE
Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
1.3.6.1.4.1.2544.2.5.4.2.2.4.1.4OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmBConfigTraceTransmitSapi
OBJECT-TYPE
The transmitted SAPI part of the TCMB trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.4.1.5OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmBConfigTraceTransmitDapi
OBJECT-TYPE
The transmitted DAPI part of the TCMB trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.4.1.6OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmBConfigTraceTransmitOpsp
OBJECT-TYPE
The transmitted Operator Specific part of the TCMB trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.2.4.1.7OCTET STRING (SIZE(0..32))read-writecurrent
oduTcmBConfigTimMode
OBJECT-TYPE
TCM_B Trace Identifier Mismatch (TIM) detection/action for TIM defect.
1.3.6.1.4.1.2544.2.5.4.2.2.4.1.8TimModeread-writecurrent
oduTcmCConfigTable
OBJECT-TYPE
Contains entries for the configuration of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.2.5not-accessiblecurrent
oduTcmCConfigEntry
OBJECT-TYPE
ODU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.2.5.1not-accessiblecurrent
oduTcmCConfigSignalDegradeThreshold
OBJECT-TYPE
Threshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). Ref. table 24/G.7710.
1.3.6.1.4.1.2544.2.5.4.2.2.5.1.1Integer32 (1..100 | -2147483648)read-writecurrent
oduTcmCConfigSignalDegradePeriod
OBJECT-TYPE
Measuring period for ODU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.
1.3.6.1.4.1.2544.2.5.4.2.2.5.1.2Unsigned32 (2..10 | 4294967295)read-writecurrent
oduTcmCConfigTcmLevel
OBJECT-TYPE
Activation of Tandem Connection Monitoring Instance C
1.3.6.1.4.1.2544.2.5.4.2.2.5.1.3OtnTcmLevelread-writecurrent
oduTcmCConfigTraceExpected
OBJECT-TYPE
Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
1.3.6.1.4.1.2544.2.5.4.2.2.5.1.4OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmCConfigTraceTransmitSapi
OBJECT-TYPE
The transmitted SAPI part of the TCMC trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.5.1.5OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmCConfigTraceTransmitDapi
OBJECT-TYPE
The transmitted DAPI part of the TCMC trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.5.1.6OCTET STRING (SIZE(0..15))read-writecurrent
oduTcmCConfigTraceTransmitOpsp
OBJECT-TYPE
The transmitted Operator Specific part of the TCMC trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.2.5.1.7OCTET STRING (SIZE(0..32))read-writecurrent
oduTcmCConfigTimMode
OBJECT-TYPE
TCM_C Trace Identifier Mismatch (TIM) detection/action for TIM defect.
1.3.6.1.4.1.2544.2.5.4.2.2.5.1.8TimModeread-writecurrent
oduTcmADataTable
OBJECT-TYPE
Contains entries for the status of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.2.6not-accessiblecurrent
oduTcmADataEntry
OBJECT-TYPE
ODU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.2.6.1not-accessiblecurrent
oduTcmADataTraceReceivedSapi
OBJECT-TYPE
The received SAPI part of the TCMA trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.6.1.1OCTET STRING (SIZE(0..15))read-onlycurrent
oduTcmADataTraceReceivedDapi
OBJECT-TYPE
The received DAPI part of the TCMA trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.6.1.2OCTET STRING (SIZE(0..15))read-onlycurrent
oduTcmADataTraceReceivedOpsp
OBJECT-TYPE
The received Operator Specific part of the TCMA trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.2.6.1.3OCTET STRING (SIZE(0..32))read-onlycurrent
oduTcmBDataTable
OBJECT-TYPE
Contains entries for the status of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.2.7not-accessiblecurrent
oduTcmBDataEntry
OBJECT-TYPE
ODU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.2.7.1not-accessiblecurrent
oduTcmBDataTraceReceivedSapi
OBJECT-TYPE
The received SAPI part of the TCMB trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.7.1.1OCTET STRING (SIZE(0..15))read-onlycurrent
oduTcmBDataTraceReceivedDapi
OBJECT-TYPE
The received DAPI part of the TCMB trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.7.1.2OCTET STRING (SIZE(0..15))read-onlycurrent
oduTcmBDataTraceReceivedOpsp
OBJECT-TYPE
The received Operator Specific part of the TCMB trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.2.7.1.3OCTET STRING (SIZE(0..32))read-onlycurrent
oduTcmCDataTable
OBJECT-TYPE
Contains entries for the status of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
1.3.6.1.4.1.2544.2.5.4.2.2.8not-accessiblecurrent
oduTcmCDataEntry
OBJECT-TYPE
ODU interfaces will have an entry in this table.
1.3.6.1.4.1.2544.2.5.4.2.2.8.1not-accessiblecurrent
oduTcmCDataTraceReceivedSapi
OBJECT-TYPE
The received SAPI part of the TCMC trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.8.1.1OCTET STRING (SIZE(0..15))read-onlycurrent
oduTcmCDataTraceReceivedDapi
OBJECT-TYPE
The received DAPI part of the TCMC trace (15 character)
1.3.6.1.4.1.2544.2.5.4.2.2.8.1.2OCTET STRING (SIZE(0..15))read-onlycurrent
oduTcmCDataTraceReceivedOpsp
OBJECT-TYPE
The received Operator Specific part of the TCMC trace (32 character)
1.3.6.1.4.1.2544.2.5.4.2.2.8.1.3OCTET STRING (SIZE(0..32))read-onlycurrent
inventoryMib
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.5
inventoryTable
OBJECT-TYPE
This table lists all physically present (equipped) equipment in the NE
1.3.6.1.4.1.2544.2.5.5.1not-accessiblecurrent
inventoryEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.1.1not-accessiblecurrent
inventoryUnitName
OBJECT-TYPE
ADVA Official Equipment Name
1.3.6.1.4.1.2544.2.5.5.1.1.1SnmpAdminStringread-onlycurrent
inventoryFirmwarePackageRev
OBJECT-TYPE
Firmware Package Revision Number
1.3.6.1.4.1.2544.2.5.5.1.1.2SnmpAdminStringread-onlycurrent
inventoryHardwareRev
OBJECT-TYPE
Equipment Revision Number
1.3.6.1.4.1.2544.2.5.5.1.1.3SnmpAdminStringread-onlycurrent
inventorySoftwareRev
OBJECT-TYPE
The active Application software version on the unit/module.
1.3.6.1.4.1.2544.2.5.5.1.1.4SnmpAdminStringread-onlycurrent
inventoryFpgaRev
OBJECT-TYPE
The active FPGA version on the unit/module.
1.3.6.1.4.1.2544.2.5.5.1.1.5SnmpAdminStringread-onlycurrent
inventorySerialNum
OBJECT-TYPE
Equipment Serial Number
1.3.6.1.4.1.2544.2.5.5.1.1.6SnmpAdminStringread-onlycurrent
inventoryPartnumber
OBJECT-TYPE
ADVA Part Number
1.3.6.1.4.1.2544.2.5.5.1.1.7SnmpAdminStringread-onlycurrent
inventoryCleiCode
OBJECT-TYPE
Common Language Equipment Identifier
1.3.6.1.4.1.2544.2.5.5.1.1.8SnmpAdminStringread-onlycurrent
inventoryVendorId
OBJECT-TYPE
OEM Vendor Code
1.3.6.1.4.1.2544.2.5.5.1.1.9SnmpAdminStringread-onlycurrent
inventoryType
OBJECT-TYPE
Type of a physical entity: shelf/module/plug
1.3.6.1.4.1.2544.2.5.5.1.1.10EntityTyperead-onlycurrent
inventoryUniversalSerialIdent
OBJECT-TYPE
Unique Serial Identifier
1.3.6.1.4.1.2544.2.5.5.1.1.11SnmpAdminStringread-onlycurrent
inventoryMacAddress
OBJECT-TYPE
Ethernet MAC address
1.3.6.1.4.1.2544.2.5.5.1.1.12MacAddressread-onlycurrent
inventoryGradeInventory
OBJECT-TYPE
Used to distinguish between NCU capabilities (range of supported services or applications)
1.3.6.1.4.1.2544.2.5.5.1.1.13Graderead-onlycurrent
inventoryCfSerialNum
OBJECT-TYPE
Compact Flash Serial Number
1.3.6.1.4.1.2544.2.5.5.1.1.14SnmpAdminStringread-onlycurrent
inventoryCfModel
OBJECT-TYPE
Compact Flash Model Number
1.3.6.1.4.1.2544.2.5.5.1.1.15SnmpAdminStringread-onlycurrent
entityTable
OBJECT-TYPE
Table for all existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
1.3.6.1.4.1.2544.2.5.5.2not-accessiblecurrent
entityEntry
OBJECT-TYPE
Entry for all existing addresses.
1.3.6.1.4.1.2544.2.5.5.2.1not-accessiblecurrent
entityIndex
OBJECT-TYPE
Existing adress index
1.3.6.1.4.1.2544.2.5.5.2.1.1EntityIndexaccessible-for-notifycurrent
entityContainedIn
OBJECT-TYPE
Contained in
1.3.6.1.4.1.2544.2.5.5.2.1.2EntityIndexread-onlycurrent
entityClass
OBJECT-TYPE
See EntityClass
1.3.6.1.4.1.2544.2.5.5.2.1.3EntityClassread-onlycurrent
entityClassInstanceNumber
OBJECT-TYPE
The class instance number of this entity within the module(card)
1.3.6.1.4.1.2544.2.5.5.2.1.4Integer32 (1..32000 | -2147483648)read-onlycurrent
entityIndexAid
OBJECT-TYPE
Name
1.3.6.1.4.1.2544.2.5.5.2.1.5SnmpAdminStringread-onlycurrent
entityType
OBJECT-TYPE
The type of FspR7 entity. Please refer to EntityType for further deails.
1.3.6.1.4.1.2544.2.5.5.2.1.6EntityTyperead-onlycurrent
entityAssignmentState
OBJECT-TYPE
See AssignmentState.
1.3.6.1.4.1.2544.2.5.5.2.1.7AssignmentStateread-onlycurrent
entityEquipmentState
OBJECT-TYPE
See EquipmentState.
1.3.6.1.4.1.2544.2.5.5.2.1.8EquipmentStateread-onlycurrent
containsTable
OBJECT-TYPE
Table for all existing addresses. Gives the index of the subtending entity in the containment.
1.3.6.1.4.1.2544.2.5.5.3not-accessiblecurrent
containsEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.3.1not-accessiblecurrent
containsIndex
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.3.1.1EntityIndexread-onlycurrent
controlPlaneWdmEntityTable
OBJECT-TYPE
Table for all existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
1.3.6.1.4.1.2544.2.5.5.4not-accessiblecurrent
controlPlaneWdmEntityEntry
OBJECT-TYPE
Entry for all existing addresses.
1.3.6.1.4.1.2544.2.5.5.4.1not-accessiblecurrent
controlPlaneWdmEntityIndex
OBJECT-TYPE
Existing adress index
1.3.6.1.4.1.2544.2.5.5.4.1.1EntityIndexaccessible-for-notifycurrent
controlPlaneWdmEntityContainedIn
OBJECT-TYPE
Contained in
1.3.6.1.4.1.2544.2.5.5.4.1.2EntityIndexread-onlycurrent
controlPlaneWdmEntityClass
OBJECT-TYPE
See EntityClass
1.3.6.1.4.1.2544.2.5.5.4.1.3CpWdmEntityClassread-onlycurrent
controlPlaneWdmEntityClassInstanceNumber
OBJECT-TYPE
The class instance number of this entity within the module(card)
1.3.6.1.4.1.2544.2.5.5.4.1.4Integer32 (1..32000 | -2147483648)read-onlycurrent
controlPlaneWdmEntityIndexAid
OBJECT-TYPE
Name
1.3.6.1.4.1.2544.2.5.5.4.1.5SnmpAdminStringread-onlycurrent
controlPlaneWdmEntityAssignmentState
OBJECT-TYPE
See AssignmentState.
1.3.6.1.4.1.2544.2.5.5.4.1.6AssignmentStateread-onlycurrent
controlPlaneWdmContainsTable
OBJECT-TYPE
Table for all existing addresses. Gives the index of the subtending entity in the containment.
1.3.6.1.4.1.2544.2.5.5.5not-accessiblecurrent
controlPlaneWdmContainsEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.5.1not-accessiblecurrent
controlPlaneWdmContainsIndex
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.5.1.1EntityIndexread-onlycurrent
controlPlaneEthEntityTable
OBJECT-TYPE
Table for all existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
1.3.6.1.4.1.2544.2.5.5.6not-accessiblecurrent
controlPlaneEthEntityEntry
OBJECT-TYPE
Entry for all existing addresses.
1.3.6.1.4.1.2544.2.5.5.6.1not-accessiblecurrent
controlPlaneEthEntityIndex
OBJECT-TYPE
Existing adress index
1.3.6.1.4.1.2544.2.5.5.6.1.1EntityIndexaccessible-for-notifycurrent
controlPlaneEthEntityContainedIn
OBJECT-TYPE
Contained in
1.3.6.1.4.1.2544.2.5.5.6.1.2EntityIndexread-onlycurrent
controlPlaneEthEntityClass
OBJECT-TYPE
See EntityClass
1.3.6.1.4.1.2544.2.5.5.6.1.3CpWdmEntityClassread-onlycurrent
controlPlaneEthEntityClassInstanceNumber
OBJECT-TYPE
The class instance number of this entity within the module(card)
1.3.6.1.4.1.2544.2.5.5.6.1.4Integer32 (1..32000 | -2147483648)read-onlycurrent
controlPlaneEthEntityIndexAid
OBJECT-TYPE
Name
1.3.6.1.4.1.2544.2.5.5.6.1.5SnmpAdminStringread-onlycurrent
controlPlaneEthEntityAssignmentState
OBJECT-TYPE
See AssignmentState.
1.3.6.1.4.1.2544.2.5.5.6.1.6AssignmentStateread-onlycurrent
controlPlaneEthContainsTable
OBJECT-TYPE
Table for all existing addresses. Gives the index of the subtending entity in the containment.
1.3.6.1.4.1.2544.2.5.5.7not-accessiblecurrent
controlPlaneEthContainsEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.7.1not-accessiblecurrent
controlPlaneEthContainsIndex
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.7.1.1EntityIndexread-onlycurrent
ptpEntityTable
OBJECT-TYPE
Table for PTP existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
1.3.6.1.4.1.2544.2.5.5.10not-accessiblecurrent
ptpEntityEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.10.1not-accessiblecurrent
ptpEntityIndex
OBJECT-TYPE
Existing adress index
1.3.6.1.4.1.2544.2.5.5.10.1.1EntityIndexaccessible-for-notifycurrent
ptpEntityContainedIn
OBJECT-TYPE
Contained in
1.3.6.1.4.1.2544.2.5.5.10.1.2EntityIndexread-onlycurrent
ptpEntityClass
OBJECT-TYPE
See EntityClass
1.3.6.1.4.1.2544.2.5.5.10.1.3EntityClassread-onlycurrent
ptpEntityClassInstanceNumber
OBJECT-TYPE
The class instance number of this entity within the module(card)
1.3.6.1.4.1.2544.2.5.5.10.1.4Integer32 (1..32000 | -2147483648)read-onlycurrent
ptpEntityIndexAid
OBJECT-TYPE
Name
1.3.6.1.4.1.2544.2.5.5.10.1.5SnmpAdminStringread-onlycurrent
ptpEntityType
OBJECT-TYPE
The type of FspR7 entity. Please refer to EntityType for further deails.
1.3.6.1.4.1.2544.2.5.5.10.1.6EntityTyperead-onlycurrent
ptpEntityAssignmentState
OBJECT-TYPE
See AssignmentState.
1.3.6.1.4.1.2544.2.5.5.10.1.7AssignmentStateread-onlycurrent
ptpEntityEquipmentState
OBJECT-TYPE
See EquipmentState.
1.3.6.1.4.1.2544.2.5.5.10.1.8EquipmentStateread-onlycurrent
ptpEntityReferencedTo
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.10.1.9EntityIndexread-onlycurrent
vtpEntityTable
OBJECT-TYPE
Table for VTP existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
1.3.6.1.4.1.2544.2.5.5.11not-accessiblecurrent
vtpEntityEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.11.1not-accessiblecurrent
vtpEntityIndex
OBJECT-TYPE
Existing adress index
1.3.6.1.4.1.2544.2.5.5.11.1.1EntityIndexaccessible-for-notifycurrent
vtpEntityContainedIn
OBJECT-TYPE
Contained in
1.3.6.1.4.1.2544.2.5.5.11.1.2EntityIndexread-onlycurrent
vtpEntityClass
OBJECT-TYPE
See EntityClass
1.3.6.1.4.1.2544.2.5.5.11.1.3EntityClassread-onlycurrent
vtpEntityClassInstanceNumber
OBJECT-TYPE
The class instance number of this entity within the module(card)
1.3.6.1.4.1.2544.2.5.5.11.1.4Integer32 (1..32000 | -2147483648)read-onlycurrent
vtpEntityIndexAid
OBJECT-TYPE
Name
1.3.6.1.4.1.2544.2.5.5.11.1.5SnmpAdminStringread-onlycurrent
vtpEntityType
OBJECT-TYPE
The type of FspR7 entity. Please refer to EntityType for further deails.
1.3.6.1.4.1.2544.2.5.5.11.1.6EntityTyperead-onlycurrent
vtpEntityAssignmentState
OBJECT-TYPE
See AssignmentState.
1.3.6.1.4.1.2544.2.5.5.11.1.7AssignmentStateread-onlycurrent
vtpEntityEquipmentState
OBJECT-TYPE
See EquipmentState.
1.3.6.1.4.1.2544.2.5.5.11.1.8EquipmentStateread-onlycurrent
vtpEntityReferencedTo
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.11.1.9EntityIndexread-onlycurrent
controlPlaneOtnEntityTable
OBJECT-TYPE
Table for all existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
1.3.6.1.4.1.2544.2.5.5.12not-accessiblecurrent
controlPlaneOtnEntityEntry
OBJECT-TYPE
Entry for all existing addresses.
1.3.6.1.4.1.2544.2.5.5.12.1not-accessiblecurrent
controlPlaneOtnEntityIndex
OBJECT-TYPE
Existing adress index
1.3.6.1.4.1.2544.2.5.5.12.1.1EntityIndexaccessible-for-notifycurrent
controlPlaneOtnEntityContainedIn
OBJECT-TYPE
Contained in
1.3.6.1.4.1.2544.2.5.5.12.1.2EntityIndexread-onlycurrent
controlPlaneOtnEntityClass
OBJECT-TYPE
See EntityClass
1.3.6.1.4.1.2544.2.5.5.12.1.3CpWdmEntityClassread-onlycurrent
controlPlaneOtnEntityClassInstanceNumber
OBJECT-TYPE
The class instance number of this entity within the module(card)
1.3.6.1.4.1.2544.2.5.5.12.1.4Integer32 (1..32000 | -2147483648)read-onlycurrent
controlPlaneOtnEntityIndexAid
OBJECT-TYPE
Name
1.3.6.1.4.1.2544.2.5.5.12.1.5SnmpAdminStringread-onlycurrent
controlPlaneOtnEntityAssignmentState
OBJECT-TYPE
See AssignmentState.
1.3.6.1.4.1.2544.2.5.5.12.1.6AssignmentStateread-onlycurrent
controlPlaneOtnContainsTable
OBJECT-TYPE
Table for all existing addresses. Gives the index of the subtending entity in the containment.
1.3.6.1.4.1.2544.2.5.5.13not-accessiblecurrent
controlPlaneOtnContainsEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.13.1not-accessiblecurrent
controlPlaneOtnContainsIndex
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.5.13.1.1EntityIndexread-onlycurrent
updateBackupRestoreMib
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.6
swAdmin
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.6.1
swDbFileTable
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.1.1not-accessiblecurrent
swDbFileEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.1.1.1not-accessiblecurrent
swDbFileIndex
OBJECT-TYPE
Index
1.3.6.1.4.1.2544.2.5.6.1.1.1.1EntityIndexnot-accessiblecurrent
swDbFileArea
OBJECT-TYPE
Type of Area
1.3.6.1.4.1.2544.2.5.6.1.1.1.2FileArearead-onlycurrent
swDbFileType
OBJECT-TYPE
Type of File
1.3.6.1.4.1.2544.2.5.6.1.1.1.3FileTyperead-onlycurrent
swDbFileSize
OBJECT-TYPE
Size of Memory = USED + AVAILABLE
1.3.6.1.4.1.2544.2.5.6.1.1.1.4Unsigned32read-onlycurrent
swDbFileCreationTime
OBJECT-TYPE
Creation Time
1.3.6.1.4.1.2544.2.5.6.1.1.1.5DateAndTimeread-onlycurrent
swDbFileVersion
OBJECT-TYPE
General Release Issue Number of software in the ACT or STBY memory location. Format: XX-YY-Z
1.3.6.1.4.1.2544.2.5.6.1.1.1.6SnmpAdminStringread-onlycurrent
swDbFileGrade
OBJECT-TYPE
Used to distinguish between NCU capabilities (range of supported services or applications)
1.3.6.1.4.1.2544.2.5.6.1.1.1.7Graderead-onlycurrent
swDbFileComment
OBJECT-TYPE
Comment of PGM or DBS files.
1.3.6.1.4.1.2544.2.5.6.1.1.1.8SnmpAdminStringread-writecurrent
swDbFileFileName
OBJECT-TYPE
File Name
1.3.6.1.4.1.2544.2.5.6.1.1.1.9SnmpAdminStringread-onlycurrent
swDbFileRowStatus
OBJECT-TYPE
RowStatus
1.3.6.1.4.1.2544.2.5.6.1.1.1.10RowStatusread-writecurrent
swDbFilePgmType
OBJECT-TYPE
Program Type
1.3.6.1.4.1.2544.2.5.6.1.1.1.11PgmTyperead-onlycurrent
fwDataTable
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.1.2not-accessiblecurrent
fwDataEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.1.2.1not-accessiblecurrent
fwDataNewVersion
OBJECT-TYPE
New Firmware Package Revision Number of file which resides on ACT PGM partition.
1.3.6.1.4.1.2544.2.5.6.1.2.1.1SnmpAdminStringread-onlycurrent
fwDataStandbyVersion
OBJECT-TYPE
New Firmware Package Revision Number of file which resides on STBY PGM partition.
1.3.6.1.4.1.2544.2.5.6.1.2.1.2SnmpAdminStringread-onlycurrent
fwDataServiceImpairment
OBJECT-TYPE
Service Affecting Change during FWP upgrade and Restart operation
1.3.6.1.4.1.2544.2.5.6.1.2.1.3ServiceAffectingread-onlycurrent
fwDataBootStatus
OBJECT-TYPE
Boot State. Every state change (excluding IDLE) does generate a corresponding transient condition.
1.3.6.1.4.1.2544.2.5.6.1.2.1.4BootStateread-onlycurrent
fwDataFirmwarePackageRev
OBJECT-TYPE
Active Firmware Package Revision Number of module software.
1.3.6.1.4.1.2544.2.5.6.1.2.1.5SnmpAdminStringread-onlycurrent
fwDataStandbyServiceImpairment
OBJECT-TYPE
Service Affecting Change during FWP upgrade after activation of STBY PGM partition.
1.3.6.1.4.1.2544.2.5.6.1.2.1.6StandbyServiceAffectingread-onlycurrent
fwDataFirmwareAvailable
OBJECT-TYPE
Firmware package for module available for ACT-PGM
1.3.6.1.4.1.2544.2.5.6.1.2.1.7NoYesNAread-onlycurrent
fwDataFirmwareApproved
OBJECT-TYPE
Firmware package update for Encryption module is approved by Crypto Officer
1.3.6.1.4.1.2544.2.5.6.1.2.1.8NoYesNAread-onlycurrent
fwDataFirmwarePackageRevBackup
OBJECT-TYPE
Standby Firmware Package Revision Number, Format XX.YY.ZZ (X,Y,Z are decimal characters, leading 0 are omitted).
1.3.6.1.4.1.2544.2.5.6.1.2.1.9SnmpAdminStringread-onlycurrent
fwDataReadyForActivation
OBJECT-TYPE
FWPREV-STBY == FWPREV-SYS-ACT
1.3.6.1.4.1.2544.2.5.6.1.2.1.10YesNoNAread-onlycurrent
fwDataActivationReadyOnStandby
OBJECT-TYPE
FWPREV-STBY == FWPREV-SYS-STBY
1.3.6.1.4.1.2544.2.5.6.1.2.1.11YesNoNAread-onlycurrent
fwDataProtectionPart
OBJECT-TYPE
Module is active part of Channel Card Protection Group.
1.3.6.1.4.1.2544.2.5.6.1.2.1.12FspR7YesNoread-onlycurrent
fwDataForm
OBJECT-TYPE
Form of module
1.3.6.1.4.1.2544.2.5.6.1.2.1.13ModuleFormread-onlycurrent
fwDataStandbyFirmwareAvailable
OBJECT-TYPE
Firmware package for module available for STBY-PGM
1.3.6.1.4.1.2544.2.5.6.1.2.1.14NoYesNAread-onlycurrent
coldRestartCapTable
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.1.3not-accessiblecurrent
coldRestartCapEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.1.3.1not-accessiblecurrent
coldRestartCapServiceAffectingCap
OBJECT-TYPE
Service Affecting Change during FWP upgrade and Restart operation
1.3.6.1.4.1.2544.2.5.6.1.3.1.1ServiceAffectingCapsread-onlycurrent
eqpFwUpgradeRequest
OBJECT-TYPE
Update, Install and Reboot commands.
1.3.6.1.4.1.2544.2.5.6.1.10CommandEqptread-writecurrent
eqpFwServiceImpairment
OBJECT-TYPE
Service Affecting Change during FWP upgrade and Restart operation
1.3.6.1.4.1.2544.2.5.6.1.11ServiceAffectingread-writecurrent
eqpFwNextEqpForUpdate
OBJECT-TYPE
The valid address of physically available Equipment part.
1.3.6.1.4.1.2544.2.5.6.1.12EntityIndexread-writecurrent
eqpFwEqpType
OBJECT-TYPE
The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)
1.3.6.1.4.1.2544.2.5.6.1.13FspR7EquipmentTyperead-writecurrent
eqpFwNcuServerBusy
OBJECT-TYPE
NCU SW download busy
1.3.6.1.4.1.2544.2.5.6.1.14FspR7FalseTrueread-onlycurrent
eqpFwEqpServerBusy
OBJECT-TYPE
Firmware package download busy
1.3.6.1.4.1.2544.2.5.6.1.15FspR7FalseTrueread-onlycurrent
updateEqpt
OBJECT-TYPE
Number of equipment which have to be updated
1.3.6.1.4.1.2544.2.5.6.1.16Unsigned32read-onlycurrent
installedEqpt
OBJECT-TYPE
Number of equipment is already installed
1.3.6.1.4.1.2544.2.5.6.1.17Unsigned32read-onlycurrent
selectedFile
OBJECT-TYPE
File Name
1.3.6.1.4.1.2544.2.5.6.1.18SnmpAdminStringread-writecurrent
ncuActivationDate
OBJECT-TYPE
Activation Date in local time. Format: YY-MM-DD
1.3.6.1.4.1.2544.2.5.6.1.19FspR7Dateread-writecurrent
ncuActivationTime
OBJECT-TYPE
Activation Time in local time. Format HH-MM-SS
1.3.6.1.4.1.2544.2.5.6.1.20FspR7Timeread-writecurrent
ncuScheduledActivation
OBJECT-TYPE
Enable scheduled activation of the standby PGM partition.
1.3.6.1.4.1.2544.2.5.6.1.21NcuAutoActivationread-writecurrent
ncuScheduledDbRestore
OBJECT-TYPE
Shows whether scheduled activtion will be a database restore or a new software activation
1.3.6.1.4.1.2544.2.5.6.1.22RestoreActivationread-writecurrent
encryptionFwpFile
OBJECT-TYPE
The name FWP for encryption capable modules.
1.3.6.1.4.1.2544.2.5.6.1.23SnmpAdminStringread-onlycurrent
clearRdiskRequest
OBJECT-TYPE
This object initiate RDISK clearance.
1.3.6.1.4.1.2544.2.5.6.1.24INTEGER {undefined(0), active(1), inactive(2)}read-writecurrent
ncuActivationDateUtc
OBJECT-TYPE
Activation Date Format: YY-MM-DD
1.3.6.1.4.1.2544.2.5.6.1.25FspR7Dateread-writecurrent
ncuActivationTimeUtc
OBJECT-TYPE
Activation Time Format: HH-MM-SS
1.3.6.1.4.1.2544.2.5.6.1.26FspR7Timeread-writecurrent
neBackupEncryption
OBJECT-TYPE
Allows the database backup file to be encrypted with a user specified password.
1.3.6.1.4.1.2544.2.5.6.1.38EnableStateread-writecurrent
neBackupPassword
OBJECT-TYPE
Secret, case-sensitive password to for encryption
1.3.6.1.4.1.2544.2.5.6.1.39SnmpAdminStringread-writecurrent
neF7AutomaticRemoteBackupEncryption
OBJECT-TYPE
Allows the database backup file to be encrypted with a user specified password.
1.3.6.1.4.1.2544.2.5.6.1.40EnableStateread-writecurrent
neF7AutomaticRemoteBackupPassword
OBJECT-TYPE
Secret, case-sensitive password to for encryption
1.3.6.1.4.1.2544.2.5.6.1.41SnmpAdminStringread-writecurrent
neBackupUsers
OBJECT-TYPE
Specifies how user accounts are handled for database operations
1.3.6.1.4.1.2544.2.5.6.1.42FspR7UsersDbread-writecurrent
neInitialConnectionMode
OBJECT-TYPE
NCU C1 Auto Connect/DHCP Mode will offer DHCP leases to the user's device.
1.3.6.1.4.1.2544.2.5.6.1.43FspR7EnableDisableread-writecurrent
neF7AutomaticRemoteBackupUsers
OBJECT-TYPE
Specifies how user accounts are handled for database operations
1.3.6.1.4.1.2544.2.5.6.1.44FspR7UsersDbread-writecurrent
dbAdmin
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.6.2
neRestoreConfig
OBJECT-TYPE
Shows whether the last activation was(will be) a database restore or a new software activation
1.3.6.1.4.1.2544.2.5.6.2.1RestoreActivationread-writecurrent
swDbDataTable
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.2.2not-accessiblecurrent
swDbDataEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.2.2.1not-accessiblecurrent
swDbDataIndex
OBJECT-TYPE
Index
1.3.6.1.4.1.2544.2.5.6.2.2.1.1EntityIndexnot-accessiblecurrent
swDbDataArea
OBJECT-TYPE
Type of Area
1.3.6.1.4.1.2544.2.5.6.2.2.1.2FileArearead-onlycurrent
swDbDataProgramVersion
OBJECT-TYPE
General Release Issue Number of software in the ACT or STBY memory location. Format: XX-YY-Z
1.3.6.1.4.1.2544.2.5.6.2.2.1.3SnmpAdminStringread-onlycurrent
swDbDataDatabaseVersion
OBJECT-TYPE
General Release Issue Number of Database in the ACT or STBY memory location. Typically this will be the same as the GISSUE.
1.3.6.1.4.1.2544.2.5.6.2.2.1.4SnmpAdminStringread-onlycurrent
swDbDataActivationTime
OBJECT-TYPE
Activation Time
1.3.6.1.4.1.2544.2.5.6.2.2.1.5DateAndTimeread-onlycurrent
swDbDataRestoreConfig
OBJECT-TYPE
Shows whether the last activation was(will be) a database restore or a new software activation
1.3.6.1.4.1.2544.2.5.6.2.2.1.6RestoreActivationread-onlycurrent
swDbDataFirmwareSetVersion
OBJECT-TYPE
Firmware Package Set Version
1.3.6.1.4.1.2544.2.5.6.2.2.1.7SnmpAdminStringread-onlycurrent
swDbDataNcuSoftwareVersion
OBJECT-TYPE
NCU Software Version ACT or STBY memory location. Format: XX-YY-Z
1.3.6.1.4.1.2544.2.5.6.2.2.1.8SnmpAdminStringread-onlycurrent
swDbDataStandbyPartitionStatus
OBJECT-TYPE
Partition State
1.3.6.1.4.1.2544.2.5.6.2.2.1.9PartitionStatusread-onlycurrent
swDbDataNumEqpt
OBJECT-TYPE
Number of all provisioned and equipped equipment in system
1.3.6.1.4.1.2544.2.5.6.2.2.1.10Unsigned32read-onlycurrent
swDbDataNumLegacyEqpt
OBJECT-TYPE
Number of all legacy provisioned and equipped modules in system,
1.3.6.1.4.1.2544.2.5.6.2.2.1.11Unsigned32read-onlycurrent
swDbDataNumNativeSaUpdate
OBJECT-TYPE
Number of all native modules which have to be updated (SA), both with already properly installed pak on standby image and those which need installation.
1.3.6.1.4.1.2544.2.5.6.2.2.1.12Unsigned32read-onlycurrent
swDbDataNumNativeNsaUpdate
OBJECT-TYPE
Number of all modules which have to be updated (NSA),both with already properly installed pak on standby image and those which need installation.
1.3.6.1.4.1.2544.2.5.6.2.2.1.13Unsigned32read-onlycurrent
swDbDataNumLegacyUpdate
OBJECT-TYPE
Number of all legacy modules which have to be updated.
1.3.6.1.4.1.2544.2.5.6.2.2.1.14Unsigned32read-onlycurrent
swDbDataNumSaNotReady
OBJECT-TYPE
Number of modules which can be updated with a service affecting (SA) firmware package.
1.3.6.1.4.1.2544.2.5.6.2.2.1.15Unsigned32read-onlycurrent
swDbDataNumNsaNotReady
OBJECT-TYPE
Number of modules which can be updated with a non-service affecting (NSA) firmware package.
1.3.6.1.4.1.2544.2.5.6.2.2.1.16Unsigned32read-onlycurrent
swDbDataCapTable
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.2.3not-accessiblecurrent
swDbDataCapEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.2.3.1not-accessiblecurrent
swDbDataCapUpgradeRequest
OBJECT-TYPE
Index value is a requested upgrade type from neSwUpgradeRequest object, where following values are applicable: - install(3) - activate(4) - reboot(6) - activateAlp(10) - activateDefaultAlp(11)
1.3.6.1.4.1.2544.2.5.6.2.3.1.1INTEGER {undefined(0), none(1), download(2), install(3), activate(4), revertToPrevious(5), reboot(6), downloadInstallActivateReboot(7), installActivateReboot(8), revertToPreviousReboot(9), activateAlp(10), activateDefaultAlp(11), upload(12), autoDownloadInstall(13), autoInstall(14), fwpInstall(15), fwpDownloadInstall(16), downloadCf(17), uploadCf(18), installCf(19), autoInstallCf(20), uploadPa(21), activateWithFwp(22), forceReboot(23), stbyFwpInstall(24)}not-accessiblecurrent
swDbDataCapRestoreConfig
OBJECT-TYPE
Shows whether the last activation was(will be) a database restore or a new software activation
1.3.6.1.4.1.2544.2.5.6.2.3.1.2RestoreActivationCapsread-onlycurrent
swDbDataDefaultsTable
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.2.4not-accessiblecurrent
swDbDataDefaultsEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.6.2.4.1not-accessiblecurrent
swDbDataDefaultsUpgradeRequest
OBJECT-TYPE
Index value is a requested upgrade type from neSwUpgradeRequest object, where following values are applicable: - install(3) - activate(4) - reboot(6) - activateAlp(10) - activateDefaultAlp(11)
1.3.6.1.4.1.2544.2.5.6.2.4.1.1INTEGER {undefined(0), none(1), download(2), install(3), activate(4), revertToPrevious(5), reboot(6), downloadInstallActivateReboot(7), installActivateReboot(8), revertToPreviousReboot(9), activateAlp(10), activateDefaultAlp(11), upload(12), autoDownloadInstall(13), autoInstall(14), fwpInstall(15), fwpDownloadInstall(16), downloadCf(17), uploadCf(18), installCf(19), autoInstallCf(20), uploadPa(21), activateWithFwp(22), forceReboot(23), stbyFwpInstall(24)}not-accessiblecurrent
swDbDataDefaultsRestoreConfig
OBJECT-TYPE
Shows whether the last activation was(will be) a database restore or a new software activation
1.3.6.1.4.1.2544.2.5.6.2.4.1.2RestoreActivationread-onlycurrent
snmpAgent
OBJECT-IDENTITY
1.3.6.1.4.1.2544.2.5.7
snmpServerPort
OBJECT-TYPE
The TCP or UDP port on which a server is listening
1.3.6.1.4.1.2544.2.5.7.2Integer32read-writecurrent
snmpProxyServerAdminState
OBJECT-TYPE
Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted.
1.3.6.1.4.1.2544.2.5.7.3FspR7AdminStateSnmpProxyread-writecurrent
snmpProxyServerPort
OBJECT-TYPE
The TCP or UDP port on which a server is listening
1.3.6.1.4.1.2544.2.5.7.4Integer32read-onlycurrent
snmpProxyServerSynchroState
OBJECT-TYPE
This parameter is used to synchronize proxy table on GNE with destination NE's availability.
1.3.6.1.4.1.2544.2.5.7.5SnmpProxySynchronizationStateread-writecurrent
snmpProxyServerSynchroStage
OBJECT-TYPE
This parameter is used to indicate stage of synchronization process.
1.3.6.1.4.1.2544.2.5.7.6SnmpProxySynchronizationStageaccessible-for-notifycurrent
snmpProxyEntrySingleTargetOutTable
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.7.10not-accessiblecurrent
snmpProxyEntrySingleTargetOutEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.7.10.1not-accessiblecurrent
snmpProxyEntrySingleTargetOutAddress
OBJECT-TYPE
IP Address assigned to LAN IP Interface
1.3.6.1.4.1.2544.2.5.7.10.1.1IpAddressnot-accessiblecurrent
snmpProxyEntrySingleTargetOutPort
OBJECT-TYPE
The destination port
1.3.6.1.4.1.2544.2.5.7.10.1.2Unsigned32 (1..65535)not-accessiblecurrent
snmpProxyEntrySingleTargetOutNodeAgentStatus
OBJECT-TYPE
1.3.6.1.4.1.2544.2.5.7.10.1.3DestinationNodeOrAgentStateaccessible-for-notifycurrent
snmpProxyEntrySingleTargetOutContext
OBJECT-TYPE
The contextName used in SNMP messages to an SNMP Proxy Forwarder to indicate for which SNMP Proxy Client the SNMP messages is meant
1.3.6.1.4.1.2544.2.5.7.10.1.4SnmpAdminStringread-onlycurrent
snmpProxyEntrySingleTargetOutRowStatus
OBJECT-TYPE
RowStatus
1.3.6.1.4.1.2544.2.5.7.10.1.5RowStatusread-writecurrent
snmpProxyEntrySingleTargetOutAdminState
OBJECT-TYPE
Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted.
1.3.6.1.4.1.2544.2.5.7.10.1.6FspR7AdminStateSnmpProxyread-writecurrent
snmpProxyEntrySingleTargetOutUserName
OBJECT-TYPE
The name string for user authentication purposes
1.3.6.1.4.1.2544.2.5.7.10.1.7SnmpAdminStringread-writecurrent