CM-SYSTEM-MIB
- Registered at
- 1.3.6.1.4.1.2544.1.12.2
- Last updated
- 2021-01-27 00:00
- Organization
- ADVA Optical Networking SE
- Revisions
- 2021-01-27 00:00
- Namespace
- adva
- Source file
CM-SYSTEM-MIB- Digest
sha256:83d9fa0b1997559bd0711428bb03adb17e0de5c9036984b2985b7f17256a9d33
Description
This module defines the System MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
Contact
Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199
Imports
| From | Symbols |
|---|---|
| ADVA-MIB | FileTransferProtocol, TrapCounter, fsp150cm |
| CM-COMMON-MIB | IpVersion, RestartType |
| IF-MIB | InterfaceIndex |
| IPV6-TC | Ipv6Address |
| LLDP-V2-MIB | lldpV2RemEntry |
| LLDP-V2-TC-MIB | LldpV2DestAddressTableIndex |
| SNMP-FRAMEWORK-MIB | SnmpEngineID |
| SNMP-TARGET-MIB | snmpTargetAddrName |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ADVA-MIB CM-COMMON-MIB CM-SYSTEM-MIB ENTITY-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB IPV6-TC LLDP-V2-MIB LLDP-V2-TC-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMP-TARGET-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AffectedEntity TEXTUAL-CONVENTION Defines the affected Entity. | current | |||
| CallhomeState TEXTUAL-CONVENTION Describes States available for CallHome | current | |||
| CmAclFilterAction TEXTUAL-CONVENTION Enumerations for Access Control List permit - Permit access, deny - Deny access. | current | |||
| CmAutoProvMode TEXTUAL-CONVENTION Enumerations for Auto Provisioning Mode off - manual mode, confirm - auto provisioning with confirmation auto - true auto provisioning. | current | |||
| CmFileServicesMode TEXTUAL-CONVENTION File Services Operation. idle - Idle and available. dbupload - Database upload in progress. dbdownload - Database download in progress. dbbackup - Database backup in progress. dbrestore - Database restore in progress. swdownload - Software download in progress. swinstall - Software install in progress. swupgrade - Software upgrade in progress. swvalidate - Software validation in progress. swcancelupgrade - Software upgrade cancelled. swrevert - Software upgrade reverted. rebooting - System rebooting. debugfileupload - Last Reset Cause debug file upload in progress. securitylogfileupload - Security log upload in progress alarmlogfileupload - Alarm log upload in progress auditlogfileupload - Audit log upload in progress dbpropagate - Database propagate in progress. swpropagate - Software propagate in progress. sysdiagfileupload - System diagnose file upload in progress. sysdiagfilesave - System diagnose file save in progress. configfileupload - Configuration file upload in progress. configfiledownload - Configuration file download in progress. defaultvalsfiledownload- Default Values file download in progress. satresultupload - SAT test result file upload in progress. sslcertificatedownload - SSL Certificate file download in progress. sslprivatekeydownload - SSL Private Key file download in progress. sslencprivatekeydownload - SSL Encrypted Private Key file download in progress. sslkeypairdownload - SSL Key Pair file download in progress. csrUpload - CSR Upload rfc2544testreportupload - Rfc2544 Test Report Upload | current | |||
| CmFileServicesStatus TEXTUAL-CONVENTION Status of the user initiated file transfer. in-progress - File transfer / processing is in progress. success - File transfer and processing completed successfully. login-failed - Login failed. file-not-found - File not found. permission-denied - Permission denied. server-unreachable - Server unreachable. no-space-left - No space left on device. invalid-file-type - Invalid file type. nobackup-database - No backup database. no-sw-toinstall - No software to install. sw-not-installed - Software not installed. validation-timer-notactive - Validation timer not active. cannot-revert - Cannot revert. install-failed - Installation failed. upgrade-failed - Upgrade Failed. revert-failed - Revert failed. failure - Generic File transfer or processing failure. badarchive - Bad Archive. incompatarchive - Incompatible Archive. | current | |||
| CmFileTransferMethod TEXTUAL-CONVENTION Enumerations for File Transfer Methods ftp - FTP scp - SCP sftp- Secure FTP web - WEB based, this is a read-only. tftp- TFTP. | current | |||
| CmNtpMode TEXTUAL-CONVENTION Enumerations for NTP Types client, server, both, ntp-server-and-peering, ntp-peering . | current | |||
| CmNtpServerType TEXTUAL-CONVENTION Enumerations for NTP Server Types primary secondary . | current | |||
| CmNtpType TEXTUAL-CONVENTION Enumerations for NTP Types unicast multicast anycast . | current | |||
| CmRestartCauseType TEXTUAL-CONVENTION System Restart Cause Type. poweronreset - Interruption of power. userinitiated - User initiated such as software upgrade, restore database, restore system defaults, restore factory defaults unrecoverableappevent - Unrecoverable application event unrecoverablesysevent - Unrecoverable system event hwwatchdogexpired - Hardware watchdog expired bustxntimeout - Bus transaction timeout hardware - Hardware failure. | current | |||
| CmVersionType TEXTUAL-CONVENTION Enumerations for Version Type active, standby. | current | |||
| F3ConfigFileAction TEXTUAL-CONVENTION Defines the actions on configuration file. none - Unused value restart-with-file - Restart the system; System will revert to using system defaults and will apply the specified configuration files on restart save-delta - Save delta configuration file : this generates a running config delta w.r.t the system defaults remove - Remove specified configuration file save-full - Save running configuration file and it will generate a full running config file load-config - Load specified delta config file without restarting. | current | |||
| F3ConfigFileStatus TEXTUAL-CONVENTION Defines the status of configuration file actions. initial - Initial status in-progress - Configuration File Operation is in progress completed - Configuration File Operation completed failed - Configuration File Operation failed | current | |||
| F3TargetAddressLifetime TEXTUAL-CONVENTION Lifetime of target address. | current | |||
| FileTransferServerType TEXTUAL-CONVENTION Defines the file transfer server Type. ipaddr - server ipv4 address ipv6addr - server ipv6 address hostname - server host name URL - the URL of the remote server | current | |||
| LldpV2ConfigurationADVAExtMaxNeighborsAction TEXTUAL-CONVENTION Discard: information selected to be discarded is the information in the current LLDPDU. Deleteentry:information selected to be discarded is currently in the LLDP remote systems MIB. | current | |||
| NtpAuthKeyType TEXTUAL-CONVENTION Defines the NTP Authentication Key Type. | current | |||
| PeerUpgradeReadyCondition TEXTUAL-CONVENTION Defines the Peer Upgrade Ready Condition Entity. | current | |||
| PeerUpgradeStatus TEXTUAL-CONVENTION Defines the Peer Upgrade Status Entity. | current | |||
| ServerConfigType TEXTUAL-CONVENTION Defines the file transfer server Type. DHCP - Server is assigned by DHCP server USERDEFINED - server assinged with user configuration. | current | |||
| SysAuthKeyType TEXTUAL-CONVENTION Defines the System Authentication Key Type. | current | |||
| SysLogFormatType TEXTUAL-CONVENTION Defines the Syslog Timestamp Format Type. ADVA - Adva Timestamp format RFC3164 - RFC3164 Timestamp format. | current | |||
| TimeOfDayType TEXTUAL-CONVENTION Defines the System Time Of Day Type. local - System time driven by local clock ntp - System time driven by NTP client ptp - System time driven by PTP Telecom Slave timeclock - System time driven by time clock ntpclock - System time driven by NTP server or peers | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cmSystemObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1 | |||
| cmErrorInfoObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.1 | |||
| lastSetErrorInformation OBJECT-TYPE This provides detailed information on the last SNMP SET operation failure on the enterprise MIBs. | 1.3.6.1.4.1.2544.1.12.2.1.1.1 | DisplayString (SIZE(0..256)) | read-only | current |
| cmCliObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.2 | |||
| cliCmdPromptPrefix OBJECT-TYPE User specified command prompt prefix, used by the CLI, at the system level. | 1.3.6.1.4.1.2544.1.12.2.1.2.1 | DisplayString (SIZE(0..64)) | read-write | current |
| cmAccessProtocols OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.3 | |||
| telnetEnabled OBJECT-TYPE This provides ability to enable/disable the TELNET protocol on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.1 | TruthValue | read-write | current |
| sshEnabled OBJECT-TYPE This provides ability to enable/disable the Secure Shell protocol on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.2 | TruthValue | read-write | current |
| ftpEnabled OBJECT-TYPE This provides ability to enable/disable the File Transfer Protocol (FTP) on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.3 | TruthValue | read-write | current |
| scpEnabled OBJECT-TYPE This provides ability to enable/disable the Secure Copy (SCP) on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.4 | TruthValue | read-write | current |
| serialPortEnabled OBJECT-TYPE This provides ability to enable/disable the Serial Port on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.5 | TruthValue | read-write | current |
| httpEnabled OBJECT-TYPE This provides ability to enable/disable the HTTP protocol on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.6 | TruthValue | read-write | current |
| httpsEnabled OBJECT-TYPE This provides ability to enable/disable the HTTP protocol on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.7 | TruthValue | read-write | current |
| sftpEnabled OBJECT-TYPE This provides ability to enable/disable the SFTP protocol on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.8 | TruthValue | read-write | current |
| tftpEnabled OBJECT-TYPE This provides ability to enable/disable the TFTP protocol on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.9 | TruthValue | read-write | current |
| netconfOverSSHEnabled OBJECT-TYPE This provides ability to enable/disable the NETCONF over SSH on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.10 | TruthValue | read-write | current |
| usbPortEnabled OBJECT-TYPE This provides ability to enable/disable the USB Host Port on the system. | 1.3.6.1.4.1.2544.1.12.2.1.3.11 | TruthValue | read-write | current |
| cmSysSecObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.4 | |||
| securityBanner OBJECT-TYPE This provides ability to manage the security banner text used for Graphical User Interface as well as CLI access. | 1.3.6.1.4.1.2544.1.12.2.1.4.1 | DisplayString (SIZE(0..2000)) | read-write | current |
| aclTable OBJECT-TYPE A list of entries corresponding to the access control IP network addresses. Agent provides upto 10 access control IP network addresses to be configured. Access is only 'permitted' from these IP network addresses. | 1.3.6.1.4.1.2544.1.12.2.1.4.2 | not-accessible | current | |
| aclEntry OBJECT-TYPE An entry containing information applicable to a particular Access Control IP Network Address that can be configured. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1 | not-accessible | current | |
| aclEntryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify an ACL entry within an ACL. The manager may not assume any particular semantics or meaning to this index, except that it identifies a logical row in the table. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.1 | Integer32 (1..32) | read-only | current |
| aclEntryFilterAction OBJECT-TYPE Whether the network IP address specified by aclEntryNetworkAddress and aclEntryNetworkMask has permission to access the system. Currently, only 'permit' is supported. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.2 | CmAclFilterAction | read-only | current |
| aclEntryNetworkAddress OBJECT-TYPE The network IP address of the entry that will be permitted to access the system. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.3 | IpAddress | read-write | current |
| aclEntryNetworkMask OBJECT-TYPE The network IP mask of the entry that will be permitted to access the system. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.4 | IpAddress | read-write | current |
| aclEntryEnabled OBJECT-TYPE This enables/disables the entity specified by aclEntryNetworkAddress and aclEntryNetworkMask to access the system. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.5 | TruthValue | read-write | current |
| aclEntryIpVersion OBJECT-TYPE This object describe the ip version. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.6 | IpVersion | read-write | current |
| aclEntryNetworkIpv6Addr OBJECT-TYPE This object describe the ipv6 adress. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.7 | Ipv6Address | read-write | current |
| aclEntryPrefixLength OBJECT-TYPE This object describe the ipv6 Prefix length. | 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.8 | Integer32 (0..128) | read-write | current |
| serialPortDisconnectAutoLogOff OBJECT-TYPE This provides ability to manage the property of the system, which causes Auto Logoff of the user session on the serial port, when the serial port is disconnected. | 1.3.6.1.4.1.2544.1.12.2.1.4.3 | TruthValue | read-write | current |
| securityPromptEnabled OBJECT-TYPE This object allows management of the CLI security prompt. | 1.3.6.1.4.1.2544.1.12.2.1.4.4 | TruthValue | read-write | current |
| cmSysModeObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.5 | |||
| ntpMode OBJECT-TYPE This provides ability to manage the Network Time Protocol (NTP) mode on the system. Currently, the system only supports 'client' mode. | 1.3.6.1.4.1.2544.1.12.2.1.5.1 | CmNtpMode | read-write | current |
| autoProvMode OBJECT-TYPE This provides ability to manage the Auto Provisioning Mode on the system. If the auto provisioning mode is 'off', auto discovery is disabled. Network Elements (shelves) need to be manually configured from the user interfaces. If the auto provisioning mode is 'confirm', Network Elements (shelves) are auto discovered, however, they need to be accepted explicitly from user interfaces to be managed. If the auto provisioning mode is 'auto', Network Elements (shelves) are auto discovered and auto provisioned, as permanent, in the system. | 1.3.6.1.4.1.2544.1.12.2.1.5.2 | INTEGER {off(1), confirm(2), auto(3)} | read-write | current |
| sysTimeOfDayType OBJECT-TYPE This object provides ability to configure System Time of Day source. This can be local, ntp or ptp. Before setting sysTimeOfDayType the f3PtpSysTimeOfDayClock object must be set to configure PTP Telecom Slave object to be used as Clock source. | 1.3.6.1.4.1.2544.1.12.2.1.5.3 | TimeOfDayType | read-write | current |
| ntpServerConfigType OBJECT-TYPE This object describe the ntp server configure type. | 1.3.6.1.4.1.2544.1.12.2.1.5.4 | ServerConfigType | read-write | current |
| sysLogServerConfigType OBJECT-TYPE This object describe the sys log server configure type. | 1.3.6.1.4.1.2544.1.12.2.1.5.5 | ServerConfigType | read-write | current |
| sysUseUtcLeapOffsetEnable OBJECT-TYPE This attribute indicates whether to use the currentUtcLeapOffset in Announce message from PTP to get UTC time from TAI based timestamps in case we want DM/TWAMP timestamping based on UTC time. This attribute only works when PTP/TimeClock is configured as source of system time of day. | 1.3.6.1.4.1.2544.1.12.2.1.5.6 | TruthValue | read-write | current |
| sysLogTimestampFormat OBJECT-TYPE This object describes the syslog server timestamp format type. | 1.3.6.1.4.1.2544.1.12.2.1.5.7 | SysLogFormatType | read-write | current |
| sysLogFacilityCode OBJECT-TYPE This object describes the syslog server facility code. | 1.3.6.1.4.1.2544.1.12.2.1.5.8 | Integer32 (0..23) | read-write | current |
| cmDatabaseObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.6 | |||
| databaseAction OBJECT-TYPE Initiates a configuration database action. This object is write only. Supported actions are: backup(1) - Backup the saved configuration database. restore(2) - Restore the database to the standby partition. activate(3) - Switches the standby and active partitions and restarts the system. save-sysdefaults(4) - Save the database as system defaults. new-sysdefaults(5) - Restart the system and overwrite the old system default database with the factory default database. restore-sysdefaults(6) - Restart the system using the system default database. restore-factorydefaults(7) - Restart the system using the factory default database. propagate-to-standby-nemi(8) - Propagate the running database to standby NEMI and activate it. force-normal(9) - Accept the database of the NEMI when the NEMI is in DB_maint status. | 1.3.6.1.4.1.2544.1.12.2.1.6.1 | INTEGER {not-applicable(0), backup(1), restore(2), activate(3), save-sysdefaults(4), new-sysdefaults(5), restore-sysdefaults(6), restore-factorydefaults(7), propagate-to-standby-nemi(8), force-normal(9)} | read-write | current |
| databaseLastSaveTime OBJECT-TYPE This object gives value of the last database save time. | 1.3.6.1.4.1.2544.1.12.2.1.6.2 | DateAndTime | read-only | current |
| databaseTable OBJECT-TYPE This table lists information about thns. | 1.3.6.1.4.1.2544.1.12.2.1.6.3 | not-accessible | current | |
| databaseEntry OBJECT-TYPE A conceptual row in the databaseTable. | 1.3.6.1.4.1.2544.1.12.2.1.6.3.1 | not-accessible | current | |
| databaseIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify an entry within the databaseTable. | 1.3.6.1.4.1.2544.1.12.2.1.6.3.1.1 | Integer32 (1..2) | read-only | current |
| databaseType OBJECT-TYPE The type of database partition. | 1.3.6.1.4.1.2544.1.12.2.1.6.3.1.2 | CmVersionType | read-only | current |
| databaseVersion OBJECT-TYPE The database version string. | 1.3.6.1.4.1.2544.1.12.2.1.6.3.1.3 | DisplayString (SIZE(0..16)) | read-only | current |
| databaseActionPassphrase OBJECT-TYPE Pass-phrase used to generate key for encrypting private keys. | 1.3.6.1.4.1.2544.1.12.2.1.6.4 | DisplayString (SIZE(0..32)) | read-write | current |
| cmSoftwareObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.7 | |||
| softwareAction OBJECT-TYPE This object is write only. Setting this object initiates the specified action. Supported actions are: install(1) - Install software. schedule-upgrade(2) - Schedule a software upgrade. At the scheduled time, the system will reboot and load the software image stored on the standby partition. The scheduled time can be specified by softwareUpgradeTime. Also see softwareValidationTimer. cancel-upgrade(3) - Cancel a scheduled software upgrade. validate-upgrade(4) - Indicate software as valid and cancel the validation timer. revert-upgrade(5) - Revert to previous software image if it still exists. propagate-to-standby-nemi(6) - Propagate the running software release to standby NEMI and active it. | 1.3.6.1.4.1.2544.1.12.2.1.7.1 | INTEGER {not-applicable(0), install(1), schedule-upgrade(2), cancel-upgrade(3), validate-upgrade(4), revert-upgrade(5), propagate-to-standby-nemi(6)} | read-write | current |
| softwareUpgradeTime OBJECT-TYPE Specifies the date and time to perform a software upgrade reboot. If this object is set to a date and time in the past or has never been set, the upgrade reboot will happen as soon as softwareAction is set to schedule-upgrade(2). This value becomes read-only when an upgrade has been scheduled. Default value is 1-1-2000 00:00:00. | 1.3.6.1.4.1.2544.1.12.2.1.7.2 | DateAndTime | read-write | current |
| softwareValidationTimer OBJECT-TYPE Time in minutes before the system will reboot and revert to the active software after a software upgrade. If set to 0, the timer is disabled and the software will automatically be validated after a software upgrade reboot. This object becomes read-only when the software validation timer is active. Default value is 0. When enabled, valid values of the timer range from 10 minutes to 720 minutes. | 1.3.6.1.4.1.2544.1.12.2.1.7.3 | INTEGER (0 | 10..720) | read-write | current |
| softwareTable OBJECT-TYPE This table lists information about the software installed in the active and standby partitions. | 1.3.6.1.4.1.2544.1.12.2.1.7.4 | not-accessible | current | |
| softwareEntry OBJECT-TYPE A conceptual row in the softwareTable. | 1.3.6.1.4.1.2544.1.12.2.1.7.4.1 | not-accessible | current | |
| softwareIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify an entry within the softwareTable. | 1.3.6.1.4.1.2544.1.12.2.1.7.4.1.1 | Integer32 (1..3) | read-only | current |
| softwareType OBJECT-TYPE The type of software partition. | 1.3.6.1.4.1.2544.1.12.2.1.7.4.1.2 | CmVersionType | read-only | current |
| softwareVersion OBJECT-TYPE The software version string. | 1.3.6.1.4.1.2544.1.12.2.1.7.4.1.3 | DisplayString (SIZE(0..16)) | read-only | current |
| softwareAffectedEntity OBJECT-TYPE Affected Entity. | 1.3.6.1.4.1.2544.1.12.2.1.7.5 | AffectedEntity | read-write | current |
| softwarePeerCondition OBJECT-TYPE Peer Upgrade Ready Condition Entity. | 1.3.6.1.4.1.2544.1.12.2.1.7.6 | PeerUpgradeReadyCondition | read-write | current |
| peerUpgradeStatus OBJECT-TYPE Peer Upgrade Status Entity. | 1.3.6.1.4.1.2544.1.12.2.1.7.7 | PeerUpgradeStatus | read-only | current |
| cmFileServicesObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.8 | |||
| fileServicesAction OBJECT-TYPE This object is write only. Setting this object initiates a file transfer Supported actions are: get-database(1) - Copy a backup database from a remote server and place it in the staging area. (See databaseAction) put-database(2) - Copy a backup database to a remote server. (See databaseAction) software-copy(3) - Transfer a software image file to the system and write it to the standby partition. get-sys-database(4) - Copy a system database from a remote server and place it in the staging area. (See databaseAction) put-sys-database(5) - Copy a system database to a remote server. (See databaseAction) get-defaultsvalue-file(6) - Transfer the Defaults Value file to the system. put-sysresetdebuginfo-file(7) - Transfer the System Reset Debug Information file to a remote server. put-securitylog-file(8) - Transfer the System Security Log Information file to a remote server. put-alarmlog-file(9) - Transfer the System Alarm Log Information file to a remote server. put-audit-file(10) - Transfer the System Audit Log Information file to a remote server. get-config-file(11) - Transfer the Configuration File from a remote server. put-config-file(12) - Transfer the Configuration File to a remote server. put-sat-result(13) - Transfer the SAT test result file to a remote server. get-ssl-certificate(14) - Transfer the SSL Certificate file to the system. get-ssl-private-key(15) - Transfer the SSL Private Key file to the system. get-ssl-encrypt-private-Key(16) - Transfer the SSL Encrypted Private Key file to the system. get-ssl-key-pair(17) - Transfer the SSL Key Pair file to the system. put-csr(18) - Transfer the CSR file to the system. put-rfc2544-test-report(19) - Transfer the Rfc2544 test report to the system. | 1.3.6.1.4.1.2544.1.12.2.1.8.1 | INTEGER {not-applicable(0), get-database(1), put-database(2), software-copy(3), get-sys-database(4), put-sys-database(5), get-defaultsvalue-file(6), put-sysresetdebuginfo-file(7), put-securitylog-file(8), put-alarmlog-file(9), put-auditlog-file(10), get-config-file(11), put-config-file(12), put-sat-result(13), get-ssl-certificate(14), get-ssl-private-key(15), get-ssl-encrypt-private-Key(16), get-ssl-key-pair(17), put-csr(18), put-rfc2544-test-report(19)} | read-write | current |
| fileServicesMethod OBJECT-TYPE Specifies the method of transferring the file. Note that web(4) is a read-only enumeration. | 1.3.6.1.4.1.2544.1.12.2.1.8.2 | CmFileTransferMethod | read-write | current |
| fileServicesServerIp OBJECT-TYPE IP address of the remote server. The value of this object is cleared when fileServicesAction is set. | 1.3.6.1.4.1.2544.1.12.2.1.8.3 | IpAddress | read-write | current |
| fileServicesUserId OBJECT-TYPE User ID to use to authenticate the file transfer. The value of this object is cleared when fileServicesAction is set. | 1.3.6.1.4.1.2544.1.12.2.1.8.4 | DisplayString (SIZE(0..32)) | read-write | current |
| fileServicesPassword OBJECT-TYPE User password to authenticate the file transfer. Reading this object will return an empty string if the password has not been set or ***** if the password has been set. The value of this object is cleared when fileServicesAction is set. | 1.3.6.1.4.1.2544.1.12.2.1.8.5 | DisplayString (SIZE(0..32)) | read-write | current |
| fileServicesRemoteFile OBJECT-TYPE Path and name of the remote file. The value of this object is cleared when fileServicesAction is set. | 1.3.6.1.4.1.2544.1.12.2.1.8.6 | DisplayString (SIZE(0..256)) | read-write | current |
| fileServicesStatus OBJECT-TYPE Status of the user initiated file transfer. | 1.3.6.1.4.1.2544.1.12.2.1.8.7 | CmFileServicesStatus | read-only | current |
| fileServicesPercentComplete OBJECT-TYPE Percent completion of operation. | 1.3.6.1.4.1.2544.1.12.2.1.8.8 | Integer32 (0..100) | read-only | current |
| fileServicesMode OBJECT-TYPE This object provides information on the current state of file services. | 1.3.6.1.4.1.2544.1.12.2.1.8.9 | CmFileServicesMode | read-only | current |
| fileServicesServerType OBJECT-TYPE This object describe the remote server's address type. | 1.3.6.1.4.1.2544.1.12.2.1.8.10 | FileTransferServerType | read-write | current |
| fileServicesServerIpv6Addr OBJECT-TYPE IPv6 address of the remote server. The value of this object is cleared when fileServicesAction is set. | 1.3.6.1.4.1.2544.1.12.2.1.8.11 | Ipv6Address | read-write | current |
| fileServicesDbFileName OBJECT-TYPE Name of the upload unique database file. | 1.3.6.1.4.1.2544.1.12.2.1.8.12 | DisplayString (SIZE(0..256)) | read-only | current |
| fileServicesAffectedEntity OBJECT-TYPE Affected Entity. | 1.3.6.1.4.1.2544.1.12.2.1.8.13 | AffectedEntity | read-write | current |
| fileServicesSslKeyPairName OBJECT-TYPE This is a unique name for the SSL key pair. | 1.3.6.1.4.1.2544.1.12.2.1.8.14 | DisplayString | read-write | current |
| fileServicesDecryptionPassword OBJECT-TYPE This is the decryption password for the SSL file. | 1.3.6.1.4.1.2544.1.12.2.1.8.15 | DisplayString | read-write | current |
| fileServicesCsrName OBJECT-TYPE This is a unique name for the CSR. | 1.3.6.1.4.1.2544.1.12.2.1.8.16 | DisplayString | read-write | current |
| cmLogObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.9 | |||
| cmSysLogObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.9.1 | |||
| sysLogServerTable OBJECT-TYPE This table allows configuration of the remote syslog hosts. | 1.3.6.1.4.1.2544.1.12.2.1.9.1.1 | not-accessible | current | |
| sysLogServerEntry OBJECT-TYPE A conceptual row in the sysLogServerTable. | 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1 | not-accessible | current | |
| sysLogServerIndex OBJECT-TYPE An integer index value used to uniquely identify an entry within the sysLogServerTable. | 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.1 | Integer32 (1..3) | read-only | current |
| sysLogIpAddress OBJECT-TYPE IP address of the remote syslog server. Value of 0.0.0.0 indicates the sys log server is not configured. | 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.2 | IpAddress | read-write | current |
| sysLogPort OBJECT-TYPE Optional port address of the remote log server. If not specified, the default port for the standard syslog utility (UDP Port 514) will be used. | 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.3 | Integer32 (1..65535) | read-write | current |
| sysLogIpVersion OBJECT-TYPE This object describe the ip version. | 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.4 | IpVersion | read-write | current |
| sysLogIpv6Addr OBJECT-TYPE This object describe the ipv6 address. | 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.5 | Ipv6Address | read-write | current |
| cmSecLogObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.9.2 | |||
| secLog2sysLogEnabled OBJECT-TYPE This allows to enable/disable the system security log to syslog. | 1.3.6.1.4.1.2544.1.12.2.1.9.2.1 | TruthValue | read-write | current |
| cmAuditLogObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.9.3 | |||
| auditLog2sysLogEnabled OBJECT-TYPE This allows to enable/disable the system audit log to syslog. | 1.3.6.1.4.1.2544.1.12.2.1.9.3.1 | TruthValue | read-write | current |
| auditLog2fileEnabled OBJECT-TYPE This allows to enable/disable the system audit log to file. | 1.3.6.1.4.1.2544.1.12.2.1.9.3.2 | TruthValue | read-write | current |
| cmAlarmLogObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.9.4 | |||
| alarmLog2sysLogEnabled OBJECT-TYPE This allows to enable/disable the system alarm log to syslog. | 1.3.6.1.4.1.2544.1.12.2.1.9.4.1 | TruthValue | read-write | current |
| alarmLog2fileEnabled OBJECT-TYPE This allows to enable/disable the system alarm log to file. | 1.3.6.1.4.1.2544.1.12.2.1.9.4.2 | TruthValue | read-write | current |
| cmTimeObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.10 | |||
| ntpClientEnabled OBJECT-TYPE This allows to enable/disable the NTP client. | 1.3.6.1.4.1.2544.1.12.2.1.10.1 | TruthValue | read-write | current |
| ntpPrimaryServer OBJECT-TYPE IP address of the primary remote NTP time server. Value of 0.0.0.0 indicates the NTP server is not configured. | 1.3.6.1.4.1.2544.1.12.2.1.10.2 | IpAddress | read-write | current |
| ntpBackupServer OBJECT-TYPE IP address of the backup remote NTP time server. Value of 0.0.0.0 indicates the NTP server is not configured. | 1.3.6.1.4.1.2544.1.12.2.1.10.3 | IpAddress | read-write | current |
| ntpType OBJECT-TYPE Type of communication with the remote NTP server. | 1.3.6.1.4.1.2544.1.12.2.1.10.4 | CmNtpType | read-only | current |
| ntpActiveServer OBJECT-TYPE Indication of which server is currently active. | 1.3.6.1.4.1.2544.1.12.2.1.10.5 | CmNtpServerType | read-only | current |
| ntpSwitchServer OBJECT-TYPE Operation to switch the NTP Server. | 1.3.6.1.4.1.2544.1.12.2.1.10.6 | CmNtpServerType | read-write | current |
| ntpServerRoundTripDelay OBJECT-TYPE This object provides the round-trip delay (in microseconds) to the NTP Server. It returns a value of 0 if NTP is not enabled. | 1.3.6.1.4.1.2544.1.12.2.1.10.7 | Integer32 | read-only | current |
| ntpServerPrecision OBJECT-TYPE This object provides the precision (in microseconds) to the NTP Server. | 1.3.6.1.4.1.2544.1.12.2.1.10.8 | Integer32 | read-only | current |
| ntpPollingInterval OBJECT-TYPE This object allows ability to configure the NTP polling interval in seconds. Polling interval is the time between successive NTP client requests to update local time based on time at the NTP server. | 1.3.6.1.4.1.2544.1.12.2.1.10.9 | Integer32 | read-write | current |
| ntpPrimaryServerIpVersion OBJECT-TYPE This object describe the ipversion of ntp server. | 1.3.6.1.4.1.2544.1.12.2.1.10.10 | IpVersion | read-write | current |
| ntpPrimaryServerIpv6Addr OBJECT-TYPE This object describe the ipv6 adress of ntp primary server. | 1.3.6.1.4.1.2544.1.12.2.1.10.11 | Ipv6Address | read-write | current |
| ntpBackupServerIpVersion OBJECT-TYPE This object describe the ipversion of ntp server. | 1.3.6.1.4.1.2544.1.12.2.1.10.12 | IpVersion | read-write | current |
| ntpBackupServerIpv6Addr OBJECT-TYPE This object describe the ipv6 adress of ntp backup server. | 1.3.6.1.4.1.2544.1.12.2.1.10.13 | Ipv6Address | read-write | current |
| ntpPrimaryServerAuthKey OBJECT-TYPE This object specifies the authentication key for the primary NTP server. | 1.3.6.1.4.1.2544.1.12.2.1.10.14 | VariablePointer | read-write | current |
| ntpBackupServerAuthKey OBJECT-TYPE This object specifies the authentication key for the backup NTP server. | 1.3.6.1.4.1.2544.1.12.2.1.10.15 | VariablePointer | read-write | current |
| f3NtpAuthKeyTable OBJECT-TYPE This table specifies the Keys used for NTP Authentication. | 1.3.6.1.4.1.2544.1.12.2.1.10.16 | not-accessible | current | |
| f3NtpAuthKeyEntry OBJECT-TYPE NTP Authentication Key Entry | 1.3.6.1.4.1.2544.1.12.2.1.10.16.1 | not-accessible | current | |
| f3NtpAuthKeyId OBJECT-TYPE This is the unique index for the NTP Authentication Key. | 1.3.6.1.4.1.2544.1.12.2.1.10.16.1.1 | Unsigned32 | not-accessible | current |
| f3NtpAuthKeyNumber OBJECT-TYPE This is the identifier used by the NTP authentication protocol using which the Client and Server identify the key. | 1.3.6.1.4.1.2544.1.12.2.1.10.16.1.2 | Unsigned32 | read-write | current |
| f3NtpAuthKeyType OBJECT-TYPE Authentication type, MD5 or SHA-1. | 1.3.6.1.4.1.2544.1.12.2.1.10.16.1.3 | NtpAuthKeyType | read-write | current |
| f3NtpAuthKey OBJECT-TYPE This is the key value and length depends on the authentication type used. It is 16 character printable string for MD5 excluding whitespace and '#' and for SHA-1 it is a 40 character hex-encoded string. | 1.3.6.1.4.1.2544.1.12.2.1.10.16.1.4 | DisplayString | read-write | current |
| f3NtpAuthKeyStorageType OBJECT-TYPE The storage type for this conceptual row. | 1.3.6.1.4.1.2544.1.12.2.1.10.16.1.5 | StorageType | read-create | current |
| f3NtpAuthKeyRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3NtpAuthKeyRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3NtpAuthKeyRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3NtpAuthKeyRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.2.1.10.16.1.6 | RowStatus | read-create | current |
| cmSnmpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.11 | |||
| f3SnmpTargetAddrExtTable OBJECT-TYPE This table is an extension of the standard snmpTargetAddrTable(SNMP-TARGET-MIB). This table is used to manage the SNMP Dying Gasp support. | 1.3.6.1.4.1.2544.1.12.2.1.11.1 | not-accessible | current | |
| f3SnmpTargetAddrExtEntry OBJECT-TYPE A conceptual row in the f3SnmpTargetAddrExtTable. | 1.3.6.1.4.1.2544.1.12.2.1.11.1.1 | not-accessible | current | |
| f3SnmpTargetAddrExtDyingGaspPort OBJECT-TYPE When SNMP Dying Gasp is enabled at Card level, this attribute provides information on the interface (physical port) through which this Target Address is reachable (using Layer 3 ping, trace route). | 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.1 | VariablePointer | read-only | current |
| f3SnmpTargetAddrExtDyingGaspEnabled OBJECT-TYPE When SNMP Dying Gasp is enabled at Card level, this attribute specifies whether this Target Address entry should be used in the SNMP Dying Gasp TRAP PDU or not. | 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.2 | TruthValue | read-write | current |
| f3SnmpTargetAddrExtDyingGaspActive OBJECT-TYPE When SNMP Dying Gasp is enabled at Card level, in case of multiple target addresses resolving to the same interface (port), this flag indicates which target address is used for the SNMP TRAP PDU. | 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.3 | TruthValue | read-only | current |
| f3SnmpTargetAddrExtBulkTrapsEnabled OBJECT-TYPE Provides ability to enable/disable the Snmp Bulk Traps on the Target Address. | 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.4 | TruthValue | read-write | current |
| f3SnmpTargetAddrExtLifetime OBJECT-TYPE Provides a time after which target address entry will automatically be deleted. SNMP packet received from snmpTargetAddrTAddress resets timer to its original value. | 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.5 | F3TargetAddressLifetime | read-write | current |
| f3SnmpEngineID OBJECT-TYPE An SNMP engine's administratively-unique identifier. Please note that f3SnmpEngineID differs from the standard snmpEngineID (SNMP-FRAMEWORK-MIB) with MAX-ACCESS as read-write. | 1.3.6.1.4.1.2544.1.12.2.1.11.2 | SnmpEngineID | read-write | current |
| f3SnmpLongIfAlias OBJECT-TYPE This provides ability to enable/disable longer version of ifAlias. If enabled, ifAlias variable can support up to 255 character string and when disabled ifAlias is limited to 64 character string. When disabled and if alias is longer than 64 characters the ifAlias will return a string that is truncated to 64 characters. | 1.3.6.1.4.1.2544.1.12.2.1.11.3 | TruthValue | read-write | current |
| cmResetCauseObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.12 | |||
| f3SysLastResetType OBJECT-TYPE This provides the System Last Reset Type. | 1.3.6.1.4.1.2544.1.12.2.1.12.1 | RestartType | read-only | current |
| f3SysLastResetCauseType OBJECT-TYPE This provides the System Last Reset Cause Type. | 1.3.6.1.4.1.2544.1.12.2.1.12.2 | CmRestartCauseType | read-only | current |
| f3SysLastAbnormalResetTimestamp1 OBJECT-TYPE This provides the timestamp of the most recent abnormal reset. Note that the system keeps debug logs with 3 most recent abnormal resets. 8 octets of 0 value indicates that there was no abnormal reset of the system. | 1.3.6.1.4.1.2544.1.12.2.1.12.3 | DateAndTime | read-only | current |
| f3SysLastAbnormalResetTimestamp2 OBJECT-TYPE This provides the timestamp of the second most recent abnormal reset. Note that the system keeps debug logs with 3 most recent abnormal resets. 8 octets of 0 value indicates that there was only one (f3SysLastAbnormalResetTimestamp1) abnormal reset of the system. | 1.3.6.1.4.1.2544.1.12.2.1.12.4 | DateAndTime | read-only | current |
| f3SysLastAbnormalResetTimestamp3 OBJECT-TYPE This provides the timestamp of the third most recent abnormal reset. Note that the system keeps debug logs with 3 most recent abnormal resets. 8 octets of 0 value indicates that there were only two (f3SysLastAbnormalResetTimestamp1, f3SysLastAbnormalResetTimestamp2) abnormal resets of the system. | 1.3.6.1.4.1.2544.1.12.2.1.12.5 | DateAndTime | read-only | current |
| f3SysResetButtonControl OBJECT-TYPE Enable or disable the use of the push button reset swith. | 1.3.6.1.4.1.2544.1.12.2.1.12.6 | TruthValue | read-write | current |
| f3NotifObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.13 | |||
| f3DatabaseSyncTrapObject OBJECT-TYPE This object provides the Object Identifier (OID) of the entity that needs to be synchronized. This object is not accessible, it is only carried in the f3DatabaseSyncTrap notification. | 1.3.6.1.4.1.2544.1.12.2.1.13.1 | VariablePointer | not-accessible | current |
| f3ConfigFileObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.14 | |||
| f3ConfigFileActionFileName OBJECT-TYPE Configuration File name on which configFileAction is initiated. | 1.3.6.1.4.1.2544.1.12.2.1.14.1 | DisplayString (SIZE(0..256)) | read-write | current |
| f3ConfigFileAction OBJECT-TYPE Configuration File action to invoke config file operations. | 1.3.6.1.4.1.2544.1.12.2.1.14.2 | F3ConfigFileAction | read-write | current |
| f3ConfigFileStatus OBJECT-TYPE This object provides status of Configuration File actions. | 1.3.6.1.4.1.2544.1.12.2.1.14.3 | F3ConfigFileStatus | read-only | current |
| f3ConfigFileErrorInformation OBJECT-TYPE This object provides additional information for failed Configuration File actions. | 1.3.6.1.4.1.2544.1.12.2.1.14.4 | DisplayString (SIZE(0..512)) | read-only | current |
| f3ConfigFileTable OBJECT-TYPE This table lists information about the configuration files that are resident on the node. | 1.3.6.1.4.1.2544.1.12.2.1.14.5 | not-accessible | current | |
| f3ConfigFileEntry OBJECT-TYPE A conceptual row in the f3ConfigFileTable. | 1.3.6.1.4.1.2544.1.12.2.1.14.5.1 | not-accessible | current | |
| f3ConfigFileIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify an entry within the f3ConfigFileTable. | 1.3.6.1.4.1.2544.1.12.2.1.14.5.1.1 | Integer32 | not-accessible | current |
| f3ConfigFileName OBJECT-TYPE Name of the configuration file. | 1.3.6.1.4.1.2544.1.12.2.1.14.5.1.2 | DisplayString (SIZE(0..255)) | read-only | current |
| f3ConfigFileDescription OBJECT-TYPE User description of the configuration file. | 1.3.6.1.4.1.2544.1.12.2.1.14.5.1.3 | DisplayString (SIZE(0..256)) | read-write | current |
| f3ConfigFilePercentComplete OBJECT-TYPE This object provides configure file percent complete. | 1.3.6.1.4.1.2544.1.12.2.1.14.6 | Integer32 (0..100) | read-only | current |
| f3ConfigFilePassphrase OBJECT-TYPE Pass-phrase used to generate key for encrypting private keys. | 1.3.6.1.4.1.2544.1.12.2.1.14.7 | DisplayString (SIZE(0..32)) | read-write | current |
| cmFeatureManagementObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.15 | |||
| f3SystemFeatureTable OBJECT-TYPE This table allows ability to manage enabling/disabling system features. | 1.3.6.1.4.1.2544.1.12.2.1.15.1 | not-accessible | current | |
| f3SystemFeatureEntry OBJECT-TYPE A conceptual row in the f3SystemFeatureTable. | 1.3.6.1.4.1.2544.1.12.2.1.15.1.1 | not-accessible | current | |
| f3SystemFeatureIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify an entry within the f3SystemFeatureTable. | 1.3.6.1.4.1.2544.1.12.2.1.15.1.1.1 | Integer32 | read-only | current |
| f3SystemFeatureName OBJECT-TYPE This object provides the name of the system feature. | 1.3.6.1.4.1.2544.1.12.2.1.15.1.1.2 | DisplayString (SIZE(0..128)) | read-only | current |
| f3SystemFeatureEnabled OBJECT-TYPE This object allows system feature control. If a specific feature is disabled, the relevant operations to use that feature are denied. | 1.3.6.1.4.1.2544.1.12.2.1.15.1.1.3 | TruthValue | read-write | current |
| cmLldpV2DestAdressADVAExtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.16 | |||
| f3SystemLldpV2DestAddressADVAExtTable OBJECT-TYPE This extension table adds a row status to allow user add/delete/edit the LLDP Destination Address which is defined to Read-Only in the standard MIB. | 1.3.6.1.4.1.2544.1.12.2.1.16.1 | not-accessible | current | |
| f3SystemLldpV2DestAddressADVAExtEntry OBJECT-TYPE A conceptual row in the f3SystemLldpV2DestAddressADVAExtTable. | 1.3.6.1.4.1.2544.1.12.2.1.16.1.1 | not-accessible | current | |
| f3SystemLldpV2DestAddressADVAExtIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify an entry within the f3SystemLldpV2DestAddressADVAExtTable. | 1.3.6.1.4.1.2544.1.12.2.1.16.1.1.1 | Integer32 | not-accessible | current |
| f3SystemLldpV2ADVAExtDestMacAddress OBJECT-TYPE This attribute description the standard MIB about LLDP Destination Mac Address. | 1.3.6.1.4.1.2544.1.12.2.1.16.1.1.2 | MacAddress | read-write | current |
| f3SystemLldpV2DestAddressADVAExtRowStatus OBJECT-TYPE The status of this row. The f3SystemLldpV2DestAddressADVAExtRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3). | 1.3.6.1.4.1.2544.1.12.2.1.16.1.1.3 | RowStatus | read-write | current |
| f3SystemLldpV2PortConfigADVAExtTable OBJECT-TYPE This extension table adds a row status to allow user add/delete/edit the LLDP Destination Address for one port. | 1.3.6.1.4.1.2544.1.12.2.1.16.2 | not-accessible | current | |
| f3SystemLldpV2PortConfigADVAExtEntry OBJECT-TYPE A conceptual row in the f3SystemLldpV2PortConfigADVAExtTable. | 1.3.6.1.4.1.2544.1.12.2.1.16.2.1 | not-accessible | current | |
| f3SystemLldpV2PortConfigADVAExtIfIndex OBJECT-TYPE The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB. The value of this object is used as an index to the f3SystemLldpV2PortConfigADVAExtTable. | 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.1 | InterfaceIndex | not-accessible | current |
| f3SystemLldpV2PortConfigADVAExtDestAddressIndex OBJECT-TYPE The index value used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the MAC address can be found. The value of this object is used as an index to the f3SystemLldpV2PortConfigADVAExtTable. | 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.2 | LldpV2DestAddressTableIndex | not-accessible | current |
| f3SystemLldpV2PortConfigADVAExtAdminStatus OBJECT-TYPE The administratively desired status of the local LLDP agent. If the associated f3SystemLldpV2PortConfigADVAExtAdminStatus object is set to a value of 'txOnly(1)', then LLDP agent transmits LLDPframes on this port and it does not store any information about the remote systems connected. If the associated f3SystemLldpV2PortConfigADVAExtAdminStatus object is set to a value of 'rxOnly(2)', then the LLDP agent receives, but it does not transmit LLDP frames on this port. If the associated f3SystemLldpV2PortConfigADVAExtAdminStatus object is set to a value of 'txAndRx(3)', then the LLDP agent transmits and receives LLDP frames on this port. If the associated f3SystemLldpV2PortConfigADVAExtAdminStatus object is set to a value of 'disabled(4)', then LLDP agent does not transmit or receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in other tables, before the port's f3SystemLldpV2PortConfigADVAExtAdminStatus becomes disabled, then that information is deleted. | 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.3 | INTEGER {txOnly(1), rxOnly(2), txAndRx(3), disabled(4)} | read-write | current |
| f3SystemLldpV2PortConfigADVAExtNotificationEnable OBJECT-TYPE The f3SystemLldpV2PortConfigADVAExtNotificationEnable controls, on a per agent basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not. | 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.4 | TruthValue | read-write | current |
| f3SystemLldpV2PortConfigADVAExtTLVsTxEnable OBJECT-TYPE The f3SystemLldpV2PortConfigADVAExtTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. It should be noted that the organizationally-specific TLVs are excluded from the f3SystemLldpV2PortConfigADVAExtTLVsTxEnable bitmap. LLDP Organization Specific Information Extension MIBs should have similar configuration object to control transmission of their organizationally defined TLVs. The bit 'portDesc(0)' indicates that LLDP agent should transmit 'Port Description TLV'. The bit 'sysName(1)' indicates that LLDP agent should transmit 'System Name TLV'. The bit 'sysDesc(2)' indicates that LLDP agent should transmit 'System Description TLV'. The bit 'sysCap(3)' indicates that LLDP agent should transmit 'System Capabilities TLV'. There is no bit reserved for the management address TLV type since transmission of management address TLVs are controlled by another object, lldpV2ConfigManAddrTable. The default value for f3SystemLldpV2PortConfigADVAExtTLVsTxEnable object is empty set, which means no enumerated values are set. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.5 | Bits {portDesc(0), sysName(1), sysDesc(2), sysCap(3)} | read-write | current |
| f3SystemLldpV2PortConfigADVAExtStorageType OBJECT-TYPE The storage type for this conceptual row. | 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.6 | StorageType | read-create | current |
| f3SystemLldpV2PortConfigADVAExtRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SystemLldpV2PortConfigADVAExtRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SystemLldpV2PortConfigADVAExtRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SystemLldpV2PortConfigADVAExtRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.7 | RowStatus | read-create | current |
| f3SystemLldpV2ManAddrConfigTxPortsADVAExtTable OBJECT-TYPE This extension table adds a row status to allow user add/delete/edit the LLDP Destination Address for one port. | 1.3.6.1.4.1.2544.1.12.2.1.16.3 | not-accessible | current | |
| f3SystemLldpV2ManAddrConfigTxPortsADVAExtEntry OBJECT-TYPE A conceptual row in the f3SystemLldpV2ManAddrConfigTxPortsADVAExtTable. | 1.3.6.1.4.1.2544.1.12.2.1.16.3.1 | not-accessible | current | |
| f3SystemLldpV2ManAddrConfigTxPortsADVAExtRefInterface OBJECT-TYPE This object describe the Tx Port is on what interface, its value should be management tunnel or one dcn or none. | 1.3.6.1.4.1.2544.1.12.2.1.16.3.1.1 | VariablePointer | not-accessible | current |
| f3SystemLldpV2ManAddrConfigTxPortsADVAExtEnable OBJECT-TYPE This object describe the interface on Tx Ports whether enabled. | 1.3.6.1.4.1.2544.1.12.2.1.16.3.1.2 | TruthValue | read-write | current |
| f3SystemLldpV2ManAddrConfigTxPortsADVAExtStorageType OBJECT-TYPE The storage type for this conceptual row. | 1.3.6.1.4.1.2544.1.12.2.1.16.3.1.3 | StorageType | read-create | current |
| f3SystemLldpV2ManAddrConfigTxPortsADVAExtRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SystemLldpV2ManAddrConfigTxPortsADVAExtRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SystemLldpV2ManAddrConfigTxPortsADVAExtRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SystemLldpV2ManAddrConfigTxPortsADVAExtRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.2.1.16.3.1.4 | RowStatus | read-create | current |
| f3LldpV2ConfigurationADVAExtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.17 | |||
| f3LldpMaxNeighborsAction OBJECT-TYPE Discard: information selected to be discarded is the information in the current LLDPDU. Delete entry::information selected to be discarded is currently in the LLDP remote systems MIB. | 1.3.6.1.4.1.2544.1.12.2.1.17.1 | LldpV2ConfigurationADVAExtMaxNeighborsAction | read-write | current |
| snmpIPv6UDPDomain OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.18 | |||
| f3RawDataObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.19 | |||
| f3RawDataServerFtProtocol OBJECT-TYPE Specifies the method of transferring the file. Note that web(4) is a read-only enumeration. | 1.3.6.1.4.1.2544.1.12.2.1.19.1 | CmFileTransferMethod | read-write | current |
| f3RawDataServerFtServerName OBJECT-TYPE IP address of the raw data server. Value of 0.0.0.0 indicates the raw data server is not configured. | 1.3.6.1.4.1.2544.1.12.2.1.19.2 | IpAddress | read-write | current |
| f3RawDataServerFtUserId OBJECT-TYPE User ID to use to authenticate the file transfer. | 1.3.6.1.4.1.2544.1.12.2.1.19.3 | DisplayString (SIZE(0..32)) | read-write | current |
| f3RawDataServerFtPasswd OBJECT-TYPE User password to authenticate the file transfer. Reading this object will return an empty string if the password has not been set or ***** if the password has been set. | 1.3.6.1.4.1.2544.1.12.2.1.19.4 | DisplayString (SIZE(0..32)) | read-write | current |
| f3LldpV2RemoteSystemsData OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.20 | |||
| f3LldpV2RemExtTable OBJECT-TYPE This table is an extension of the standard lldpV2RemTable (LLDP-V2-MIB). This table adds remote TTL attribute support | 1.3.6.1.4.1.2544.1.12.2.1.20.1 | not-accessible | current | |
| f3LldpV2RemExtEntry OBJECT-TYPE A conceptual row in the f3LldpV2RemExtTable. | 1.3.6.1.4.1.2544.1.12.2.1.20.1.1 | not-accessible | current | |
| f3LldpV2RemTTL OBJECT-TYPE Integer value which indicates the number of seconds that the recipient LLDP agent is to regard the information associated with particular MSAP identifier to be valid | 1.3.6.1.4.1.2544.1.12.2.1.20.1.1.1 | Unsigned32 (1..65535) | read-only | current |
| f3SimpleLtpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.21 | |||
| f3SimpleLtpControl OBJECT-TYPE This provides ability to enable/disable the simple ltp on the system. | 1.3.6.1.4.1.2544.1.12.2.1.21.1 | TruthValue | read-write | current |
| f3SimpleLtpTransferProtocol OBJECT-TYPE Specifies the method of transferring the file. | 1.3.6.1.4.1.2544.1.12.2.1.21.2 | CmFileTransferMethod | read-write | current |
| f3SimpleLtpServerIpv4Addr OBJECT-TYPE IP address of the remote server. | 1.3.6.1.4.1.2544.1.12.2.1.21.3 | IpAddress | read-write | current |
| f3SimpleLtpUserName OBJECT-TYPE User ID to use to authenticate the file transfer. | 1.3.6.1.4.1.2544.1.12.2.1.21.4 | DisplayString | read-write | current |
| f3SimpleLtpPasswd OBJECT-TYPE Password to use to authenticate the file transfer. | 1.3.6.1.4.1.2544.1.12.2.1.21.5 | DisplayString | read-write | current |
| f3SimpleLtpConfigFileName OBJECT-TYPE The configure file name used to LTP function. | 1.3.6.1.4.1.2544.1.12.2.1.21.6 | DisplayString | read-write | current |
| f3SimpleLtpSoftwareFileName OBJECT-TYPE The software file name. | 1.3.6.1.4.1.2544.1.12.2.1.21.7 | DisplayString | read-write | current |
| f3SysAuthenKeyObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.22 | |||
| f3SysAuthKeyTable OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.12.2.1.22.1 | not-accessible | current | |
| f3SysAuthKeyEntry OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.12.2.1.22.1.1 | not-accessible | current | |
| f3SysAuthKeyIndex OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.12.2.1.22.1.1.1 | Unsigned32 | not-accessible | current |
| f3SysAuthKeyId OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.12.2.1.22.1.1.2 | Unsigned32 | read-write | current |
| f3SysAuthKeyType OBJECT-TYPE Authentication type. | 1.3.6.1.4.1.2544.1.12.2.1.22.1.1.3 | SysAuthKeyType | read-write | current |
| f3SysAuthKey OBJECT-TYPE Password for this key. | 1.3.6.1.4.1.2544.1.12.2.1.22.1.1.4 | DisplayString | read-write | current |
| f3SysAuthKeyStorageType OBJECT-TYPE The storage type for this conceptual row. | 1.3.6.1.4.1.2544.1.12.2.1.22.1.1.5 | StorageType | read-create | current |
| f3SysAuthKeyRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SysAuthKeyRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SysAuthKeyRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SysAuthKeyRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.2.1.22.1.1.6 | RowStatus | read-create | current |
| f3CallhomeServerObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.23 | |||
| f3CallhomeClientIpAddress OBJECT-TYPE Callhome client IP address. | 1.3.6.1.4.1.2544.1.12.2.1.23.1 | IpAddress | read-write | current |
| f3CallhomeState OBJECT-TYPE Callhome state. | 1.3.6.1.4.1.2544.1.12.2.1.23.2 | CallhomeState | read-only | current |
| f3SystemInfoObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.24 | |||
| f3ApplicationsBootCompleted OBJECT-TYPE This is a flag informing that system completed booting of its applications. | 1.3.6.1.4.1.2544.1.12.2.1.24.1 | TruthValue | read-only | current |
| f3ApplicationsUpTime OBJECT-TYPE The time (in hundredths of second) since the applications of the system were last initialized. | 1.3.6.1.4.1.2544.1.12.2.1.24.2 | TimeTicks | read-only | current |
| f3ZtpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.1.25 | |||
| f3EnsembleZtpEnabled OBJECT-TYPE This provides ability to enable/disable Ensemble ZTP on the system. | 1.3.6.1.4.1.2544.1.12.2.1.25.1 | TruthValue | read-write | current |
| cmSystemNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.2 | |||
| cmSystemConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.3 | |||
| cmSystemCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.3.1 | |||
| cmSystemGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.3.2 | |||
| f3SystemBulkGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.3.3 | |||
| f3BulkNotifObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.4 | |||
| f3StartNeEventLogIndex OBJECT-TYPE This object provides the associated neEventsLogged counter for the logged first event (trap) in the bulk trap. | 1.3.6.1.4.1.2544.1.12.2.4.1 | TrapCounter | read-only | current |
| f3EndNeEventLogIndex OBJECT-TYPE This object provides the associated neEventsLogged counter for the logged last event (trap) in the bulk trap. | 1.3.6.1.4.1.2544.1.12.2.4.2 | TrapCounter | read-only | current |
| f3SystemBulkNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.2.5 |
Notifications
| Name | OID | Status |
|---|---|---|
| cmStateChangeTrap NOTIFICATION-TYPE This is the State Change Notification per Interface sent by the agent. The actual attribute value is sent by the agent in the form of a varbind list, as additional objects, as per SMIv2 (RFC2578, Section 8.1). | 1.3.6.1.4.1.2544.1.12.2.2.1 | current |
| cmAttributeValueChangeTrap NOTIFICATION-TYPE This is the Attribute Value Change Notification sent by the agent. The actual attribute value is sent by the agent in the form of a varbind list, as additional objects, as per SMIv2 (RFC2578, Section 8.1). | 1.3.6.1.4.1.2544.1.12.2.2.2 | current |
| cmObjectCreationTrap NOTIFICATION-TYPE This is the Object Creation Notification sent by the agent. The index value of the SNMP Row that is created is sent by the agent in the form of a varbind list, as additional objects, as per SMIv2 (RFC2578, Section 8.1). | 1.3.6.1.4.1.2544.1.12.2.2.3 | current |
| cmObjectDeletionTrap NOTIFICATION-TYPE This is the Object Deletion Notification sent by the agent. The index value of the SNMP Row that is deleted is sent by the agent in the form of a varbind list, as per SMIv2 (RFC2578, Section 8.1). | 1.3.6.1.4.1.2544.1.12.2.2.4 | current |
| cmSnmpDyingGaspTrap NOTIFICATION-TYPE This is the Dying Gasp SNMP trap sent by the agent. | 1.3.6.1.4.1.2544.1.12.2.2.5 | current |
| f3DatabaseSyncTrap NOTIFICATION-TYPE This is the Database Synchronization trap sent by the agent for bulk operations. The var bind list can contain multiple variables with OIDs as f3DatabaseSyncTrapObject and values as the OIDs of the entities that need synchronization. The var-binds are sent implicitly, as per SMIv2 (RFC2578, Section 8.1). | 1.3.6.1.4.1.2544.1.12.2.2.6 | current |
| f3BulkTrap NOTIFICATION-TYPE This is the bulk trap sent by the agent for bulk operations. | 1.3.6.1.4.1.2544.1.12.2.5.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| cmSystemCompliance MODULE-COMPLIANCE Describes the requirements for conformance to the CM System group. | 1.3.6.1.4.1.2544.1.12.2.3.1.1 | current |
| cmSystemObjectGroup OBJECT-GROUP A collection of objects used to manage the CM System group. | 1.3.6.1.4.1.2544.1.12.2.3.2.1 | current |
| cmSystemNotifGroup NOTIFICATION-GROUP A collection of notifications used in the CM System group. | 1.3.6.1.4.1.2544.1.12.2.3.2.2 | current |
| cmSystemObjectGroupCmHub OBJECT-GROUP A collection of objects used to manage the CM System group. | 1.3.6.1.4.1.2544.1.12.2.3.2.3 | current |
| f3SystemObjectBulkGroup OBJECT-GROUP A collection of objects used to manage the F3 System Bulk group. | 1.3.6.1.4.1.2544.1.12.2.3.3.1 | current |
| f3SystemNotifBulkGroup NOTIFICATION-GROUP A collection of notifications used in the F3 System Bulk group. | 1.3.6.1.4.1.2544.1.12.2.3.3.2 | current |