F3-PBB-MIB
- Registered at
- 1.3.6.1.4.1.2544.1.12.21
- Last updated
- 2012-10-08 00:00
- Organization
- ADVA Optical Networking
- Revisions
- 2012-10-08 00:00
- Namespace
- adva
- Source file
F3-PBB-MIB- Digest
sha256:2ef98f79d28c42ed8759b059d812c4779a9bbee0fb4cf1eb401fcc79e19b83a2
Description
This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Contact
Raghav Trivedi ADVA Optical Networking, Inc. Tel: +1 972 759-1239 E-mail: rtrivedi@advaoptical.com Postal: 2301 N. Greenville Ave. #300 Richardson, TX USA 75082
Imports
| From | Symbols |
|---|---|
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | PerfCounter64 |
| CM-FACILITY-MIB | FlowTagControl, cmEthernetAccPortEntry, cmEthernetNetPortEntry, cmFlowEntry |
| CM-IP-MIB | ipManagementTunnelEntry |
| CM-PERFORMANCE-MIB | cmEthernetNetPortHistoryEntry, cmEthernetNetPortStatsEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue, VariablePointer |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ADVA-MIB BRIDGE-MIB CM-COMMON-MIB CM-ENTITY-MIB CM-FACILITY-MIB CM-IP-MIB CM-PERFORMANCE-MIB CM-REDUNDANCY-MIB CM-SYSTEM-MIB ENTITY-MIB F3-LAG-MIB F3-PBB-MIB F3-SYNC-MIB HCNUM-TC IANA-ADDRESS-FAMILY-NUMBERS-MIB IANA-ENTITY-MIB IANAifType-MIB IEEE8023-LAG-MIB IF-MIB IPV6-TC LLDP-V2-MIB LLDP-V2-TC-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMP-TARGET-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| f3PBBConfigObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.21.1 | |||
| f3PbbEthernetAccPortTable OBJECT-TYPE A list of entries corresponding to PBB function on the net port | 1.3.6.1.4.1.2544.1.12.21.1.1 | not-accessible | current | |
| f3PbbEthernetAccPortEntry OBJECT-TYPE A conceptual row in the f3PbbEthernetAccPortTable. | 1.3.6.1.4.1.2544.1.12.21.1.1.1 | not-accessible | current | |
| f3PbbEthernetAccPortITagLoopbackMask OBJECT-TYPE This object allows to specify which itag loopback has been enabled. 1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled. | 1.3.6.1.4.1.2544.1.12.21.1.1.1.1 | INTEGER | read-write | current |
| f3PbbEthernetAccPortITagLoopback1 OBJECT-TYPE This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back. | 1.3.6.1.4.1.2544.1.12.21.1.1.1.2 | DisplayString | read-write | current |
| f3PbbEthernetAccPortITagLoopback2 OBJECT-TYPE This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back. | 1.3.6.1.4.1.2544.1.12.21.1.1.1.3 | DisplayString | read-write | current |
| f3PbbEthernetAccPortITagLoopback3 OBJECT-TYPE This object allows specification of the Itag 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back. | 1.3.6.1.4.1.2544.1.12.21.1.1.1.4 | DisplayString | read-write | current |
| f3PbbEthernetNetPortTable OBJECT-TYPE A list of entries corresponding to PBB function on the net port | 1.3.6.1.4.1.2544.1.12.21.1.2 | not-accessible | current | |
| f3PbbEthernetNetPortEntry OBJECT-TYPE A conceptual row in the f3PbbEthernetNetPortTable. | 1.3.6.1.4.1.2544.1.12.21.1.2.1 | not-accessible | current | |
| f3PbbEthernetNetPortBackboneMacAddress OBJECT-TYPE This object is mac address of backbone network port. | 1.3.6.1.4.1.2544.1.12.21.1.2.1.1 | MacAddress | read-write | current |
| f3PbbEthernetNetPortITagLoopbackMask OBJECT-TYPE This object allows to specify which itag loopback has been enabled. 1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled. | 1.3.6.1.4.1.2544.1.12.21.1.2.1.2 | INTEGER | read-write | current |
| f3PbbEthernetNetPortITagLoopback1 OBJECT-TYPE This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back. | 1.3.6.1.4.1.2544.1.12.21.1.2.1.3 | DisplayString | read-write | current |
| f3PbbEthernetNetPortITagLoopback2 OBJECT-TYPE This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back. | 1.3.6.1.4.1.2544.1.12.21.1.2.1.4 | DisplayString | read-write | current |
| f3PbbEthernetNetPortITagLoopback3 OBJECT-TYPE This object allows specification of the Itag 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back. | 1.3.6.1.4.1.2544.1.12.21.1.2.1.5 | DisplayString | read-write | current |
| f3PbbFlowTable OBJECT-TYPE A list of entries corresponding to PBB function on the flow | 1.3.6.1.4.1.2544.1.12.21.1.3 | not-accessible | current | |
| f3PbbFlowEntry OBJECT-TYPE A conceptual row in the f3PbbFlowTable. | 1.3.6.1.4.1.2544.1.12.21.1.3.1 | not-accessible | current | |
| f3PbbFlowITagControl OBJECT-TYPE This object allows specification of the tag management operation on the I-TAG. Supported types are 'none', 'push', and 'pushisid'. and it must be none while ctagcontrol or stagcontrol is not none. | 1.3.6.1.4.1.2544.1.12.21.1.3.1.1 | FlowTagControl | read-write | current |
| f3PbbFlowITagISID OBJECT-TYPE This object is used to specify the ITagISID. Its rang from 256 to 16777214. | 1.3.6.1.4.1.2544.1.12.21.1.3.1.2 | Integer32 (256..16777214) | read-write | current |
| f3PbbFlowITagPriority OBJECT-TYPE This object is used to specify the priority of ITag. Its rang from 0 to 7. | 1.3.6.1.4.1.2544.1.12.21.1.3.1.3 | Integer32 (0..7) | read-write | current |
| f3PbbFlowBackboneMacDestinationEnabled OBJECT-TYPE This object indicates whether can assign BMAC value. When enabled, user can assign a unicast BMAC as B_DA for this EVC When disabled, 01-1E-83-<I-SID> will be used as B-DA. | 1.3.6.1.4.1.2544.1.12.21.1.3.1.4 | TruthValue | read-write | current |
| f3PbbFlowBackboneMacDestinationAddress OBJECT-TYPE Customer can configure the backbone MAC destination address, the default value is 01-1E-83-<I-SID>. | 1.3.6.1.4.1.2544.1.12.21.1.3.1.5 | MacAddress | read-write | current |
| f3PbbFlowA2NPbbCapableFlag OBJECT-TYPE When it is false, Drop PBB frames in the A2N direction (FPGA function), Allow to PUSH I-TAG on this flow; When A2NPbbCapableFlag is TRUE, Pass PBB frames in the A2N direction (FPGA function), Software allow PUSH I-TAG on this flow(normal) will not allow to PUSH S-TAG on this flow, will not allow to PUSH C-TAG on this flow, Software will allow to PUSH C-TAG/S-TAG on this flow. | 1.3.6.1.4.1.2544.1.12.21.1.3.1.6 | TruthValue | read-write | current |
| f3PbbIpManagementTunnelTable OBJECT-TYPE A list of entries corresponding to PBB function on the mngt tunnel | 1.3.6.1.4.1.2544.1.12.21.1.4 | not-accessible | current | |
| f3PbbIpManagementTunnelEntry OBJECT-TYPE A conceptual row in the f3PbbIpManagementTunnelTable. | 1.3.6.1.4.1.2544.1.12.21.1.4.1 | not-accessible | current | |
| f3PbbIpManagementTunnelItagEnabled OBJECT-TYPE This object ITAG whether enabled, It is Enabled only When management tunnel type is ISID based. By default it is disabled | 1.3.6.1.4.1.2544.1.12.21.1.4.1.1 | TruthValue | read-write | current |
| f3PbbIpManagementTunnelISID OBJECT-TYPE Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG). | 1.3.6.1.4.1.2544.1.12.21.1.4.1.2 | Integer32 (256..16777214) | read-write | current |
| f3PbbIpManagementTunnelIPriority OBJECT-TYPE Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG, no use at present). | 1.3.6.1.4.1.2544.1.12.21.1.4.1.3 | Integer32 (0..7) | read-write | current |
| f3PbbIpManagementTunnelBackboneMacDestinationEnabled OBJECT-TYPE When enabled, we will use provisioned B-MAC for ARP and for management packets. When disabled, we will use backbone group MAC address for ARP and get B-DA from ARP response By default, it is disabled | 1.3.6.1.4.1.2544.1.12.21.1.4.1.4 | TruthValue | read-write | current |
| f3PbbIpManagementTunnelBackboneMacDestinationAddress OBJECT-TYPE User must set a valid MAC address, Only applicable when iTagEnabled = enabled By default, it is 00:00:00:00:00:00 | 1.3.6.1.4.1.2544.1.12.21.1.4.1.5 | MacAddress | read-write | current |
| f3PBBPerformanceObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.21.2 | |||
| f3PbbEthernetNetPortStatsTable OBJECT-TYPE A collection of pbb Ethernet Network Port related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.21.2.1 | not-accessible | current | |
| f3PbbEthernetNetPortStatsEntry OBJECT-TYPE A conceptual row in the f3PbbEthernetNetPortStatsTable. Entries exist in this table for each Ethernet interface/port. | 1.3.6.1.4.1.2544.1.12.21.2.1.1 | not-accessible | current | |
| f3PbbEthernetNetPortStatsPbbUniBdaDiscard OBJECT-TYPE Number of PBB frames (BDA is not backbone group MAC) discarded due to receive BDA which is not matching the port's PBB MAC address when port is non-promiscuous mode. | 1.3.6.1.4.1.2544.1.12.21.2.1.1.1 | PerfCounter64 | read-only | current |
| f3PbbEthernetNetPortStatsPbbGroupBdaDiscard OBJECT-TYPE Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID in backbone group MAC in the B-DA when port is non-promiscuous mode. | 1.3.6.1.4.1.2544.1.12.21.2.1.1.2 | PerfCounter64 | read-only | current |
| f3PbbEthernetNetPortHistoryStatsTable OBJECT-TYPE A collection of pbb Ethernet Network Port related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.21.2.2 | not-accessible | current | |
| f3PbbEthernetNetPortHistoryStatsEntry OBJECT-TYPE A conceptual row in the f3PbbEthernetNetPortHistoryStatsTable. Entries exist in this table for each Ethernet interface/port. | 1.3.6.1.4.1.2544.1.12.21.2.2.1 | not-accessible | current | |
| f3PbbEthernetNetPortHistoryStatsPbbUniBdaDiscard OBJECT-TYPE Number of PBB frames (BDA is not backbone group MAC) discarded due to receive BDA which is not matching the port's PBB MAC address when port is non-promiscuous mode. | 1.3.6.1.4.1.2544.1.12.21.2.2.1.1 | PerfCounter64 | read-only | current |
| f3PbbEthernetNetPortHistoryStatsPbbGroupBdaDiscard OBJECT-TYPE Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID in backbone group MAC in the B-DA when port is non-promiscuous mode. | 1.3.6.1.4.1.2544.1.12.21.2.2.1.2 | PerfCounter64 | read-only | current |
| f3PBBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.21.3 | |||
| f3PBBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.21.3.1 | |||
| f3PBBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.21.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| f3PBBCompliance MODULE-COMPLIANCE Describes the requirements for conformance to the PBB Object group. | 1.3.6.1.4.1.2544.1.12.21.3.1.1 | current |
| f3PbbConfigGroup OBJECT-GROUP A collection of objects used to manage the F3 PBB Functionality . | 1.3.6.1.4.1.2544.1.12.21.3.2.1 | current |
| f3PbbStatsGroup OBJECT-GROUP A collection of objects used to manage the F3 PBB Functionality . | 1.3.6.1.4.1.2544.1.12.21.3.2.2 | current |