MIBs Depot

F3-SYNCJACK-MIB

Registered at
1.3.6.1.4.1.2544.1.12.22
Last updated
2019-08-19 00:00
Organization
ADVA Optical Networking SE
Revisions
2012-05-10 00:00
Namespace
adva
Source file
F3-SYNCJACK-MIB
Digest
sha256:175b4b2b3da62c1d84f413607dba27f35472fe9e53c23f0755c54ba7ea759c50

Description

This module defines the Sync Jack MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.

Contact

Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199

Imports

FromSymbols
ADVA-MIBfsp150cm
CM-COMMON-MIBAdminState, CmPmBinAction, CmPmIntervalType, IpPriorityMapMode, IpVersion, OperationalState, PerfCounter32, PerfCounter64, SchedActivityStatus, ScheduleType, SecondaryState
CM-ENTITY-MIBneIndex, shelfIndex, slotIndex
F3-PTP-MIBScaledNanoseconds
F3-SYNC-MIBSSMQualityLevel
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADVA-MIB
CM-COMMON-MIB
CM-ENTITY-MIB
CM-FACILITY-MIB
CM-REDUNDANCY-MIB
CM-SYSTEM-MIB
ENTITY-MIB
F3-LAG-MIB
F3-PTP-MIB
F3-SYNC-MIB
F3-SYNCJACK-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
IPV6-TC
LLDP-V2-MIB
LLDP-V2-TC-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-TARGET-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
FFOObserWindow
TEXTUAL-CONVENTION
Enumerations for FFO obser window.
current
MTIEMaskType
TEXTUAL-CONVENTION
Enumerations for Maximum Time Interval Error Mask.
current
MeasurementType
TEXTUAL-CONVENTION
Enumerations for Measurement Type.
current
PTPMeasurementDirection
TEXTUAL-CONVENTION
Enumerations for PTP Measurement Direction.
current
SyncJackTestState
TEXTUAL-CONVENTION
Enumerations for Time Interval Error Test State.
current
TIEMeasurementRate
TEXTUAL-CONVENTION
Enumerations for TIE Measurement Rate.
current
TIESourceType
TEXTUAL-CONVENTION
Enumerations for TIE Source Type.
current

Objects

NameOIDSyntaxAccessStatus
f3SyncJConfigObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.22.1
f3SyncJClockProbeTable
OBJECT-TYPE
A list of entries corresponding to the SyncJack Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.1not-accessiblecurrent
f3SyncJClockProbeEntry
OBJECT-TYPE
An entry containing information applicable to a particular SyncJack Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.1.1not-accessiblecurrent
f3SyncJClockProbeIndex
OBJECT-TYPE
Unique index value associated with the Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.1.1.1Integer32not-accessiblecurrent
f3SyncJClockProbeName
OBJECT-TYPE
This object allows SNMP management entities to provide a name to the Clock Probe entity.
1.3.6.1.4.1.2544.1.12.22.1.1.1.2DisplayString (SIZE(0..16))read-createcurrent
f3SyncJClockProbeSource
OBJECT-TYPE
This object allows setting up of the TIE Source Entity. Clock Probe compares this with the f3SyncJClockProbeReference and computes TIE, MTIE.
1.3.6.1.4.1.2544.1.12.22.1.1.1.3VariablePointerread-writecurrent
f3SyncJClockProbeReference
OBJECT-TYPE
This object allows setting up of the TIE Reference Entity. Clock Probe compares this with the f3SyncJClockProbeSource and computes TIE, MTIE.
1.3.6.1.4.1.2544.1.12.22.1.1.1.4VariablePointerread-writecurrent
f3SyncJClockProbeExpectedQL
OBJECT-TYPE
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
1.3.6.1.4.1.2544.1.12.22.1.1.1.5SSMQualityLevelread-writecurrent
f3SyncJClockProbeSourceType
OBJECT-TYPE
This object represents the Clock Probe source type.
1.3.6.1.4.1.2544.1.12.22.1.1.1.6TIESourceTyperead-createcurrent
f3SyncJClockProbeMeasurementRate
OBJECT-TYPE
This object represents the actual Clock Probe measurement rate.
1.3.6.1.4.1.2544.1.12.22.1.1.1.7TIEMeasurementRateread-onlycurrent
f3SyncJClockProbeMTIEMaskType
OBJECT-TYPE
This object represents the MTIE Mask Type.
1.3.6.1.4.1.2544.1.12.22.1.1.1.8MTIEMaskTyperead-writecurrent
f3SyncJClockProbeMTIEMaskMargin
OBJECT-TYPE
This object specifies the MTIE Mask Margin in percentage below the MTIE mask for alarm report. Value of 0 means no margin.
1.3.6.1.4.1.2544.1.12.22.1.1.1.9Unsigned32read-writecurrent
f3SyncJClockProbeScheduler
OBJECT-TYPE
This object provides the associated scheduler instance, if one exists, with this Clock Probe. This value is 0.0, if there is no scheduler associated with the Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.1.1.10VariablePointerread-onlycurrent
f3SyncJClockProbeTestState
OBJECT-TYPE
This object provides the Clock Probe test state.
1.3.6.1.4.1.2544.1.12.22.1.1.1.11SyncJackTestStateread-onlycurrent
f3SyncJClockProbeLastTIEResult
OBJECT-TYPE
This object provides last TIE result in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.1.1.12Integer32read-onlycurrent
f3SyncJClockProbeLastTIEResultTime
OBJECT-TYPE
This object provides the time associated with the last TIE result.
1.3.6.1.4.1.2544.1.12.22.1.1.1.13DateAndTimeread-onlycurrent
f3SyncJClockProbeSourceFailure
OBJECT-TYPE
This object provides information on whether the source failed.
1.3.6.1.4.1.2544.1.12.22.1.1.1.14TruthValueread-onlycurrent
f3SyncJClockProbeReferenceFailure
OBJECT-TYPE
This object provides information on whether the reference failed.
1.3.6.1.4.1.2544.1.12.22.1.1.1.15TruthValueread-onlycurrent
f3SyncJClockProbeActualTestStartTime
OBJECT-TYPE
This object provides information on the actual test start time.
1.3.6.1.4.1.2544.1.12.22.1.1.1.16DateAndTimeread-onlycurrent
f3SyncJClockProbeActualTestDuration
OBJECT-TYPE
This object provides information on the actual test duration in seconds.
1.3.6.1.4.1.2544.1.12.22.1.1.1.17Unsigned32read-onlycurrent
f3SyncJClockProbeMTIEMaskCrossedTime
OBJECT-TYPE
This object provides the time when the MTIE mask was crossed.
1.3.6.1.4.1.2544.1.12.22.1.1.1.18DateAndTimeread-onlycurrent
f3SyncJClockProbeMTIEMaskMarginCrossedTime
OBJECT-TYPE
This object provides the time when the MTIE mask margin was crossed.
1.3.6.1.4.1.2544.1.12.22.1.1.1.19DateAndTimeread-onlycurrent
f3SyncJClockProbeStatusMTIEMaskFailed
OBJECT-TYPE
This object provides the result status, whether MTIE Mask has failed.
1.3.6.1.4.1.2544.1.12.22.1.1.1.20TruthValueread-onlycurrent
f3SyncJClockProbeStatusMTIEMarginFailed
OBJECT-TYPE
This object provides the result status, whether MTIE Margin has failed.
1.3.6.1.4.1.2544.1.12.22.1.1.1.21TruthValueread-onlycurrent
f3SyncJClockProbeStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.22StorageTyperead-createcurrent
f3SyncJClockProbeRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJClockProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJClockProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJClockProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.22.1.1.1.23RowStatusread-createcurrent
f3SyncJClockProbeFfoTarget
OBJECT-TYPE
The FFO target for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.24Integer32read-writecurrent
f3SyncJClockProbeFfoObserWindow
OBJECT-TYPE
The FFO obserwer window for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.25FFOObserWindowread-writecurrent
f3SyncJClockProbeLastFFOResult
OBJECT-TYPE
The last FFO result for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.26Integer32read-onlycurrent
f3SyncJClockProbeTimeOfLastFFOResult
OBJECT-TYPE
The time of last FFO result for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.27DateAndTimeread-onlycurrent
f3SyncJClockProbeRawDataCollectionEnabled
OBJECT-TYPE
The raw data collection enabled for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.28TruthValueread-writecurrent
f3SyncJClockProbeTeAlertThreshold
OBJECT-TYPE
The TE alert threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.29Integer32read-writedeprecated
f3SyncJClockProbeTeAlertClearThreshold
OBJECT-TYPE
The TE alert clear threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.30Integer32read-writedeprecated
f3SyncJClockProbeLastTEAlertTime
OBJECT-TYPE
The last TE alert time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.31DateAndTimeread-onlydeprecated
f3SyncJClockProbeLastTEAlertClearTime
OBJECT-TYPE
The last TE alert clear time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.32DateAndTimeread-onlydeprecated
f3SyncJClockProbeRunningFailedCount
OBJECT-TYPE
The running failed count for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.33Integer32read-onlycurrent
f3SyncJClockProbeMeasurementType
OBJECT-TYPE
The measurement type configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.34MeasurementTyperead-writecurrent
f3SyncJClockProbeConstTEThreshold
OBJECT-TYPE
The Constant Time Error Alert threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.1.1.35Unsigned32read-writecurrent
f3SyncJClockProbeConstTEClrThreshold
OBJECT-TYPE
The Constant Time Error Alert Clear threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.1.1.36Unsigned32read-writecurrent
f3SyncJClockProbeConstTEWindow
OBJECT-TYPE
The Averaging window used for Constant TE calculation (sec).
1.3.6.1.4.1.2544.1.12.22.1.1.1.37Unsigned32read-writecurrent
f3SyncJClockProbeMaxTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Max TE has been measured
1.3.6.1.4.1.2544.1.12.22.1.1.1.38Unsigned32read-onlycurrent
f3SyncJClockProbeConstTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Constant TE has been measured.
1.3.6.1.4.1.2544.1.12.22.1.1.1.39Unsigned32read-onlycurrent
f3SyncJClockProbeConstTEMeasurementTime
OBJECT-TYPE
The Const TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.40Unsigned32read-onlycurrent
f3SyncJClockProbeMaxTEMeasurementTime
OBJECT-TYPE
The Max TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.41Unsigned32read-onlycurrent
f3SyncJClockProbeMaxTEThreshold
OBJECT-TYPE
The TE Max threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.42Integer32read-writecurrent
f3SyncJClockProbeMaxTEClrThreshold
OBJECT-TYPE
The TE Max clear threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.43Integer32read-writecurrent
f3SyncJClockProbeMTIERestart
OBJECT-TYPE
The MTIE Restart configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.1.1.44TruthValueread-writecurrent
f3SyncJClockProbeMTIEValueTable
OBJECT-TYPE
A list of entries corresponding to the Clock Probe's MTIE Result Values.
1.3.6.1.4.1.2544.1.12.22.1.2not-accessiblecurrent
f3SyncJClockProbeMTIEValueEntry
OBJECT-TYPE
An entry containing information applicable to a particular Clock Probe's MTIE Result Value.
1.3.6.1.4.1.2544.1.12.22.1.2.1not-accessiblecurrent
f3SyncJClockProbeMTIEValueIndex
OBJECT-TYPE
Unique index value associated with the Clock Probe Result Value.
1.3.6.1.4.1.2544.1.12.22.1.2.1.1Integer32not-accessiblecurrent
f3SyncJClockProbeMTIEValue
OBJECT-TYPE
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.2.1.2Integer32read-onlycurrent
f3SyncJClockProbeResHistoryTable
OBJECT-TYPE
A list of entries corresponding to the SyncJack Clock Probe Result History.
1.3.6.1.4.1.2544.1.12.22.1.3not-accessiblecurrent
f3SyncJClockProbeResHistoryEntry
OBJECT-TYPE
An entry containing information applicable to a particular SyncJack Clock Probe Result History.
1.3.6.1.4.1.2544.1.12.22.1.3.1not-accessiblecurrent
f3SyncJClockProbeResHistoryIndex
OBJECT-TYPE
Unique index value associated with the Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.3.1.1Integer32not-accessiblecurrent
f3SyncJClockProbeResHistoryAlias
OBJECT-TYPE
This object provides alias of the Clock Probe result history.
1.3.6.1.4.1.2544.1.12.22.1.3.1.2DisplayString (SIZE(0..256))read-writecurrent
f3SyncJClockProbeResHistorySource
OBJECT-TYPE
This object provides the source for TIE computation.
1.3.6.1.4.1.2544.1.12.22.1.3.1.3VariablePointerread-onlycurrent
f3SyncJClockProbeResHistoryReference
OBJECT-TYPE
This object provides the reference for TIE computation.
1.3.6.1.4.1.2544.1.12.22.1.3.1.4VariablePointerread-onlycurrent
f3SyncJClockProbeResHistoryExpectedQL
OBJECT-TYPE
This object provides the minimum expected Quality Level when bits-in and sync-e PHY are references.
1.3.6.1.4.1.2544.1.12.22.1.3.1.5SSMQualityLevelread-onlycurrent
f3SyncJClockProbeResHistorySourceType
OBJECT-TYPE
This object provides the Clock Probe source type.
1.3.6.1.4.1.2544.1.12.22.1.3.1.6TIESourceTyperead-onlycurrent
f3SyncJClockProbeResHistoryMeasurementRate
OBJECT-TYPE
This object provides the actual Clock Probe measurement rate.
1.3.6.1.4.1.2544.1.12.22.1.3.1.7TIEMeasurementRateread-onlycurrent
f3SyncJClockProbeResHistoryMTIEMaskType
OBJECT-TYPE
This object provides the MTIE Mask Type.
1.3.6.1.4.1.2544.1.12.22.1.3.1.8MTIEMaskTyperead-onlycurrent
f3SyncJClockProbeResHistoryMTIEMaskMargin
OBJECT-TYPE
This object provides the MTIE Mask Margin.
1.3.6.1.4.1.2544.1.12.22.1.3.1.9Unsigned32read-onlycurrent
f3SyncJClockProbeResHistorySourceFailure
OBJECT-TYPE
This object provides information on whether the source failed.
1.3.6.1.4.1.2544.1.12.22.1.3.1.10TruthValueread-onlycurrent
f3SyncJClockProbeResHistoryReferenceFailure
OBJECT-TYPE
This object provides information on whether the reference failed.
1.3.6.1.4.1.2544.1.12.22.1.3.1.11TruthValueread-onlycurrent
f3SyncJClockProbeResHistoryActualTestStartTime
OBJECT-TYPE
This object provides information on the actual test start time.
1.3.6.1.4.1.2544.1.12.22.1.3.1.12DateAndTimeread-onlycurrent
f3SyncJClockProbeResHistoryActualTestDuration
OBJECT-TYPE
This object provides information on the actual test duration in seconds.
1.3.6.1.4.1.2544.1.12.22.1.3.1.13Unsigned32read-onlycurrent
f3SyncJClockProbeResHistoryMTIEMaskCrossedTime
OBJECT-TYPE
This object provides the time when the MTIE mask was crossed.
1.3.6.1.4.1.2544.1.12.22.1.3.1.14DateAndTimeread-onlycurrent
f3SyncJClockProbeResHistoryMTIEMaskMarginCrossedTime
OBJECT-TYPE
This object provides the time when the MTIE mask margin was crossed.
1.3.6.1.4.1.2544.1.12.22.1.3.1.15DateAndTimeread-onlycurrent
f3SyncJClockProbeResHistoryStatusMTIEMaskFailed
OBJECT-TYPE
This object provides the result status, whether MTIE Mask has failed.
1.3.6.1.4.1.2544.1.12.22.1.3.1.16TruthValueread-onlycurrent
f3SyncJClockProbeResHistoryStatusMTIEMarginFailed
OBJECT-TYPE
This object provides the result status, whether MTIE Margin has failed.
1.3.6.1.4.1.2544.1.12.22.1.3.1.17TruthValueread-onlycurrent
f3SyncJClockProbeResHistoryStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.18StorageTyperead-createcurrent
f3SyncJClockProbeResHistoryRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJClockProbeResHistoryRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJClockProbeResHistoryRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJClockProbeResHistoryRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.22.1.3.1.19RowStatusread-createcurrent
f3SyncJClockProbeResHistoryMinFFO
OBJECT-TYPE
The Min FFO configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.20Integer32read-onlycurrent
f3SyncJClockProbeResHistoryMaxFFO
OBJECT-TYPE
The Max FFO configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.21Integer32read-onlycurrent
f3SyncJClockProbeResHistoryAvgFFO
OBJECT-TYPE
The average FFO configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.22Integer32read-onlycurrent
f3SyncJClockProbeResHistoryOutOfTargetFFOTime
OBJECT-TYPE
The out of target FFO time configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.23Integer32read-onlycurrent
f3SyncJClockProbeResHistoryTotalFFOTime
OBJECT-TYPE
The total FFO time configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.24Integer32read-onlycurrent
f3SyncJClockProbeResHistoryMinPhaseOffset
OBJECT-TYPE
The Min phase offset configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.25Integer32read-onlycurrent
f3SyncJClockProbeResHistoryMaxPhaseOffset
OBJECT-TYPE
The Max phase offset configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.26Integer32read-onlycurrent
f3SyncJClockProbeResHistoryAvgPhaseOffset
OBJECT-TYPE
The average phase offset configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.27Integer32read-onlycurrent
f3SyncJClockProbeResHistoryOutOfTargetPhaseOffsetTime
OBJECT-TYPE
The out of target phase offset time configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.28Integer32read-onlycurrent
f3SyncJClockProbeResHistoryTotalPhaseOffsetTime
OBJECT-TYPE
The total phase offset time configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.29Integer32read-onlycurrent
f3SyncJClockProbeResHistoryMeasurementType
OBJECT-TYPE
The measurement type configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.30MeasurementTyperead-onlycurrent
f3SyncJClockProbeResHistoryTeAlertThreshold
OBJECT-TYPE
The TE alert threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.31Integer32read-onlydeprecated
f3SyncJClockProbeResHistoryTeAlertClearThreshold
OBJECT-TYPE
The TE alert clear threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.32Integer32read-onlydeprecated
f3SyncJClockProbeResHistoryLastTEAlertTime
OBJECT-TYPE
The last TE alert time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.33DateAndTimeread-onlydeprecated
f3SyncJClockProbeResHistoryLastTEAlertClearTime
OBJECT-TYPE
The last TE alert clear time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.34DateAndTimeread-onlydeprecated
f3SyncJClockProbeResHistoryRunningFailedCount
OBJECT-TYPE
The running failed count for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.35Integer32read-onlycurrent
f3SyncJClockProbeResHistoryConstTEThreshold
OBJECT-TYPE
The Constant Time Error Alert threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.3.1.36Unsigned32read-onlycurrent
f3SyncJClockProbeResHistoryConstTEClrThreshold
OBJECT-TYPE
The Constant Time Error Alert Clear threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.3.1.37Unsigned32read-onlycurrent
f3SyncJClockProbeResHistoryConstTEWindow
OBJECT-TYPE
The Averaging window used for Constant TE calculation (sec).
1.3.6.1.4.1.2544.1.12.22.1.3.1.38Unsigned32read-onlycurrent
f3SyncJClockProbeResHistoryMaxTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Max TE has been measured
1.3.6.1.4.1.2544.1.12.22.1.3.1.39Unsigned32read-onlycurrent
f3SyncJClockProbeResHistoryConstTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Constant TE has been measured.
1.3.6.1.4.1.2544.1.12.22.1.3.1.40Unsigned32read-onlycurrent
f3SyncJClockProbeResHistoryConstTEMeasurementTime
OBJECT-TYPE
The Const TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.41Unsigned32read-onlycurrent
f3SyncJClockProbeResHistoryMaxTEMeasurementTime
OBJECT-TYPE
The Max TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.42Unsigned32read-onlycurrent
f3SyncJClockProbeResHistoryMaxTEThreshold
OBJECT-TYPE
The TE Max threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.43Integer32read-writecurrent
f3SyncJClockProbeResHistoryMaxTEClrThreshold
OBJECT-TYPE
The TE Max clear threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.3.1.44Integer32read-writecurrent
f3SyncJClockProbeResHistoryMTIEValueTable
OBJECT-TYPE
A list of histgory entries corresponding to the Clock Probe's MTIE Result Values.
1.3.6.1.4.1.2544.1.12.22.1.4not-accessiblecurrent
f3SyncJClockProbeResHistoryMTIEValueEntry
OBJECT-TYPE
An entry containing information applicable to a particular Clock Probe's MTIE Result Value.
1.3.6.1.4.1.2544.1.12.22.1.4.1not-accessiblecurrent
f3SyncJClockProbeResHistoryMTIEValueIndex
OBJECT-TYPE
Unique index value associated with the Clock Probe History Result Value.
1.3.6.1.4.1.2544.1.12.22.1.4.1.1Integer32not-accessiblecurrent
f3SyncJClockProbeResHistoryMTIEValue
OBJECT-TYPE
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.4.1.2Integer32read-onlycurrent
f3SyncJPTPClockProbeTable
OBJECT-TYPE
A list of entries corresponding to the SyncJack PTP Clock Probes.
1.3.6.1.4.1.2544.1.12.22.1.5not-accessiblecurrent
f3SyncJPTPClockProbeEntry
OBJECT-TYPE
An entry containing information applicable to a particular SyncJack PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.5.1not-accessiblecurrent
f3SyncJPTPClockProbeIndex
OBJECT-TYPE
Unique index value associated with the PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.5.1.1Integer32not-accessiblecurrent
f3SyncJPTPClockProbeName
OBJECT-TYPE
This object allows SNMP management entities to provide an name to the PTP Clock Probe entity. This is used for creation of the underlying IP Interface associated with the PTP Clock Probe entity.
1.3.6.1.4.1.2544.1.12.22.1.5.1.2DisplayString (SIZE(1..16))read-createcurrent
f3SyncJPTPClockProbeMeasurementDirection
OBJECT-TYPE
This object allows SNMP management entities to specify the Measurement Direction to the PTP Clock Probe entity.
1.3.6.1.4.1.2544.1.12.22.1.5.1.3PTPMeasurementDirectionread-writecurrent
f3SyncJPTPClockProbePTPFlowPoint
OBJECT-TYPE
This object allows SNMP management entities to specify the PTP Flow Point to use as source for PTP Clock Probe measurements.
1.3.6.1.4.1.2544.1.12.22.1.5.1.4VariablePointerread-createcurrent
f3SyncJPTPClockProbeIpPrototocol
OBJECT-TYPE
This object allows SNMP management entities to specify the IP Protocol used for PTP communication.
1.3.6.1.4.1.2544.1.12.22.1.5.1.5IpVersionread-writecurrent
f3SyncJPTPClockProbeSlaveIpV4Address
OBJECT-TYPE
This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.5.1.6IpAddressread-writecurrent
f3SyncJPTPClockProbeMasterIpV4Address
OBJECT-TYPE
This object allows SNMP management entities to specify the Master IP Address associated with the PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.5.1.7IpAddressread-writecurrent
f3SyncJPTPClockProbeReference
OBJECT-TYPE
This object allows setting up of the PTP Clock Probe TIE Reference Entity. PTP Clock Probe compares this with the PTP Master/Slave entity configured using f3SyncJPTPClockProbeMasterIpV4Address/f3SyncJPTPClockProbeSlaveIpV4Address and computes TIE, MTIE.
1.3.6.1.4.1.2544.1.12.22.1.5.1.8VariablePointerread-writecurrent
f3SyncJPTPClockProbeExpectedQL
OBJECT-TYPE
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
1.3.6.1.4.1.2544.1.12.22.1.5.1.9SSMQualityLevelread-writecurrent
f3SyncJPTPClockProbeMTIEMaskType
OBJECT-TYPE
This object represents the MTIE Mask Type.
1.3.6.1.4.1.2544.1.12.22.1.5.1.10MTIEMaskTyperead-writecurrent
f3SyncJPTPClockProbeMTIEMaskMargin
OBJECT-TYPE
This object represents the MTIE Mask Margin.
1.3.6.1.4.1.2544.1.12.22.1.5.1.11Unsigned32read-writecurrent
f3SyncJPTPClockProbeScheduler
OBJECT-TYPE
This object provides the associated scheduler instance, if one exists, with this PTP Clock Probe. This value is 0.0, if there is no scheduler associated with the PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.5.1.12VariablePointerread-onlycurrent
f3SyncJPTPClockProbeTestState
OBJECT-TYPE
This object provides the PTP Clock Probe test state.
1.3.6.1.4.1.2544.1.12.22.1.5.1.13SyncJackTestStateread-onlycurrent
f3SyncJPTPClockProbeLastTIEResult
OBJECT-TYPE
This object provides last TIE result in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.5.1.14Integer32read-onlycurrent
f3SyncJPTPClockProbeLastTIEResultTime
OBJECT-TYPE
This object provides the time associated with the last TIE result.
1.3.6.1.4.1.2544.1.12.22.1.5.1.15DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeNoTimestampFailure
OBJECT-TYPE
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
1.3.6.1.4.1.2544.1.12.22.1.5.1.16TruthValueread-onlycurrent
f3SyncJPTPClockProbeNoEventMessageFailure
OBJECT-TYPE
This object provides information on whether the measured PTP source indicated a no-event message failure.
1.3.6.1.4.1.2544.1.12.22.1.5.1.17TruthValueread-onlycurrent
f3SyncJPTPClockProbeReferenceFailure
OBJECT-TYPE
This object provides information on whether the reference failed.
1.3.6.1.4.1.2544.1.12.22.1.5.1.18TruthValueread-onlycurrent
f3SyncJPTPClockProbeActualTestStartTime
OBJECT-TYPE
This object provides information on the actual test start time.
1.3.6.1.4.1.2544.1.12.22.1.5.1.19DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeActualTestDuration
OBJECT-TYPE
This object provides information on the actual test duration in seconds.
1.3.6.1.4.1.2544.1.12.22.1.5.1.20Unsigned32read-onlycurrent
f3SyncJPTPClockProbeMTIEMaskCrossedTime
OBJECT-TYPE
This object provides the time when the MTIE mask was crossed.
1.3.6.1.4.1.2544.1.12.22.1.5.1.21DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeMTIEMaskMarginCrossedTime
OBJECT-TYPE
This object provides the time when the MTIE mask margin was crossed.
1.3.6.1.4.1.2544.1.12.22.1.5.1.22DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeStatusMTIEMaskFailed
OBJECT-TYPE
This object provides the result status, whether MTIE Mask has failed.
1.3.6.1.4.1.2544.1.12.22.1.5.1.23TruthValueread-onlycurrent
f3SyncJPTPClockProbeStatusMTIEMarginFailed
OBJECT-TYPE
This object provides the result status, whether MTIE Margin has failed.
1.3.6.1.4.1.2544.1.12.22.1.5.1.24TruthValueread-onlycurrent
f3SyncJPTPClockProbeStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.25StorageTyperead-createcurrent
f3SyncJPTPClockProbeRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPClockProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPClockProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPClockProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.22.1.5.1.26RowStatusread-createcurrent
f3SyncJPTPClockProbeFfoTarget
OBJECT-TYPE
The FFO target for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.27Integer32read-writecurrent
f3SyncJPTPClockProbeFfoObserWindow
OBJECT-TYPE
The FFO obserwer window for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.28FFOObserWindowread-writecurrent
f3SyncJPTPClockProbeLastFFOResult
OBJECT-TYPE
The last FFO result for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.29Integer32read-onlycurrent
f3SyncJPTPClockProbeTimeOfLastFFOResult
OBJECT-TYPE
The time of last FFO result for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.30DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeRawDataCollectionEnabled
OBJECT-TYPE
The raw data collection enabled for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.31TruthValueread-writecurrent
f3SyncJPTPClockProbeTeAlertThreshold
OBJECT-TYPE
The TE alert threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.32Integer32read-writedeprecated
f3SyncJPTPClockProbeTeAlertClearThreshold
OBJECT-TYPE
The TE alert clear threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.33Integer32read-writedeprecated
f3SyncJPTPClockProbeLastTEAlertTime
OBJECT-TYPE
The last TE alert time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.34DateAndTimeread-onlydeprecated
f3SyncJPTPClockProbeLastTEAlertClearTime
OBJECT-TYPE
The last TE alert clear time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.35DateAndTimeread-onlydeprecated
f3SyncJPTPClockProbeRunningFailedCount
OBJECT-TYPE
The running failed count for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.36Integer32read-onlycurrent
f3SyncJPTPClockProbeMeasurementType
OBJECT-TYPE
The measurement type configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.37MeasurementTyperead-writecurrent
f3SyncJPTPClockProbeDelayMS
OBJECT-TYPE
The delay MS for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.38Integer32read-writedeprecated
f3SyncJPTPClockProbeDelaySM
OBJECT-TYPE
The delay SM for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.39Integer32read-writedeprecated
f3SyncJPTPClockProbeTAsymmetry
OBJECT-TYPE
The Slave to Master Delay Asymmetry configured for this entity.
1.3.6.1.4.1.2544.1.12.22.1.5.1.40Integer32read-writedeprecated
f3SyncJPTPClockProbeDelayCompensation
OBJECT-TYPE
The Delay Compensation configured for this entity.
1.3.6.1.4.1.2544.1.12.22.1.5.1.41Integer32read-writecurrent
f3SyncJPTPClockProbeConstTEThreshold
OBJECT-TYPE
The Constant Time Error Alert threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.5.1.42Unsigned32read-writecurrent
f3SyncJPTPClockProbeConstTEClrThreshold
OBJECT-TYPE
The Constant Time Error Alert Clear threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.5.1.43Unsigned32read-writecurrent
f3SyncJPTPClockProbeConstTEWindow
OBJECT-TYPE
The Averaging window used for Constant TE calculation (sec).
1.3.6.1.4.1.2544.1.12.22.1.5.1.44Unsigned32read-writecurrent
f3SyncJPTPClockProbeInstTEThreshold
OBJECT-TYPE
The Instant Time Error Alert threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.5.1.45Unsigned32read-writecurrent
f3SyncJPTPClockProbeInstTEClrThreshold
OBJECT-TYPE
The Instant Time Error Alert Clear threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.5.1.46Unsigned32read-writecurrent
f3SyncJPTPClockProbeMaxTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Max TE has been measured
1.3.6.1.4.1.2544.1.12.22.1.5.1.47Unsigned32read-onlycurrent
f3SyncJPTPClockProbeConstTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Constant TE has been measured.
1.3.6.1.4.1.2544.1.12.22.1.5.1.48Unsigned32read-onlycurrent
f3SyncJPTPClockProbeInstTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Instant TE has been measured.
1.3.6.1.4.1.2544.1.12.22.1.5.1.49Unsigned32read-onlycurrent
f3SyncJPTPClockProbeSlavePortIdentity
OBJECT-TYPE
The Tested Slave Port Identity.
1.3.6.1.4.1.2544.1.12.22.1.5.1.50DisplayString (SIZE(1..20))read-writecurrent
f3SyncJPTPClockProbeMasterPortIdentity
OBJECT-TYPE
The Tested Master Port Identity.
1.3.6.1.4.1.2544.1.12.22.1.5.1.51DisplayString (SIZE(1..20))read-writecurrent
f3SyncJPTPClockProbeConstTEMeasurementTime
OBJECT-TYPE
The Const TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.52Unsigned32read-onlycurrent
f3SyncJPTPClockProbeMaxTEMeasurementTime
OBJECT-TYPE
The Max TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.53Unsigned32read-onlycurrent
f3SyncJPTPClockProbeInstTEMeasurementTime
OBJECT-TYPE
The Inst TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.54Unsigned32read-onlycurrent
f3SyncJPTPClockProbeMaxTEThreshold
OBJECT-TYPE
The TE Max threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.55Integer32read-writecurrent
f3SyncJPTPClockProbeMaxTEClrThreshold
OBJECT-TYPE
The TE Max clear threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.56Integer32read-writecurrent
f3SyncJPTPClockProbeMTIERestart
OBJECT-TYPE
The MTIE Restart configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.5.1.57TruthValueread-writecurrent
f3SyncJPTPClockProbeMTIEValueTable
OBJECT-TYPE
A list of entries corresponding to the PTP Clock Probe's MTIE Result Values.
1.3.6.1.4.1.2544.1.12.22.1.6not-accessiblecurrent
f3SyncJPTPClockProbeMTIEValueEntry
OBJECT-TYPE
An entry containing information applicable to a particular PTP Clock Probe's MTIE Result Value.
1.3.6.1.4.1.2544.1.12.22.1.6.1not-accessiblecurrent
f3SyncJPTPClockProbeMTIEValueIndex
OBJECT-TYPE
Unique index value associated with the PTP Clock Probe Result Value.
1.3.6.1.4.1.2544.1.12.22.1.6.1.1Integer32not-accessiblecurrent
f3SyncJPTPClockProbeMTIEValue
OBJECT-TYPE
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.6.1.2Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryTable
OBJECT-TYPE
A list of entries corresponding to the SyncJack PTP Clock Probe Result History.
1.3.6.1.4.1.2544.1.12.22.1.7not-accessiblecurrent
f3SyncJPTPClockProbeResHistoryEntry
OBJECT-TYPE
An entry containing information applicable to a particular SyncJack PTP Clock Probe Result History.
1.3.6.1.4.1.2544.1.12.22.1.7.1not-accessiblecurrent
f3SyncJPTPClockProbeResHistoryIndex
OBJECT-TYPE
Unique index value associated with the PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.7.1.1Integer32not-accessiblecurrent
f3SyncJPTPClockProbeResHistoryAlias
OBJECT-TYPE
This object provides alias of the PTP Clock Probe result history.
1.3.6.1.4.1.2544.1.12.22.1.7.1.2DisplayString (SIZE(0..256))read-writecurrent
f3SyncJPTPClockProbeResHistoryMeasurementDirection
OBJECT-TYPE
This object specifies the Measurement Direction to the PTP Clock Probe entity.
1.3.6.1.4.1.2544.1.12.22.1.7.1.3PTPMeasurementDirectionread-onlycurrent
f3SyncJPTPClockProbeResHistoryPTPFlowPoint
OBJECT-TYPE
This object indicates the PTP Flow Point used as source for PTP Clock Probe measurements.
1.3.6.1.4.1.2544.1.12.22.1.7.1.4VariablePointerread-onlycurrent
f3SyncJPTPClockProbeResHistoryIpPrototocol
OBJECT-TYPE
This object indicates the IP Protocol used for PTP communication.
1.3.6.1.4.1.2544.1.12.22.1.7.1.5IpVersionread-onlycurrent
f3SyncJPTPClockProbeResHistorySlaveIpV4Address
OBJECT-TYPE
This object indicates the Slave IP Address associated with the PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.7.1.6IpAddressread-onlycurrent
f3SyncJPTPClockProbeResHistoryMasterIpV4Address
OBJECT-TYPE
This object indicates the Master IP Address associated with the PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.1.7.1.7IpAddressread-onlycurrent
f3SyncJPTPClockProbeResHistoryReference
OBJECT-TYPE
This object indicates the PTP Clock Probe PTP Clock Probe Entity. PTP Clock Probe compares this with the PTP Master/Slave entity configured using f3SyncJPTPClockProbeMasterIpV4Address/f3SyncJPTPClockProbeSlaveIpV4Address and computes TIE, MTIE.
1.3.6.1.4.1.2544.1.12.22.1.7.1.8VariablePointerread-onlycurrent
f3SyncJPTPClockProbeResHistoryExpectedQL
OBJECT-TYPE
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
1.3.6.1.4.1.2544.1.12.22.1.7.1.9SSMQualityLevelread-onlycurrent
f3SyncJPTPClockProbeResHistoryMTIEMaskType
OBJECT-TYPE
This object represents the MTIE Mask Type.
1.3.6.1.4.1.2544.1.12.22.1.7.1.10MTIEMaskTyperead-onlycurrent
f3SyncJPTPClockProbeResHistoryMTIEMaskMargin
OBJECT-TYPE
This object represents the MTIE Mask Margin.
1.3.6.1.4.1.2544.1.12.22.1.7.1.11Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryNoTimestampFailure
OBJECT-TYPE
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
1.3.6.1.4.1.2544.1.12.22.1.7.1.12TruthValueread-onlycurrent
f3SyncJPTPClockProbeResHistoryNoEventMessageFailure
OBJECT-TYPE
This object provides information on whether the measured PTP source indicated a no-event message failure.
1.3.6.1.4.1.2544.1.12.22.1.7.1.13TruthValueread-onlycurrent
f3SyncJPTPClockProbeResHistoryReferenceFailure
OBJECT-TYPE
This object provides information on whether the reference failed.
1.3.6.1.4.1.2544.1.12.22.1.7.1.14TruthValueread-onlycurrent
f3SyncJPTPClockProbeResHistoryActualTestStartTime
OBJECT-TYPE
This object provides the time when the actual test was started.
1.3.6.1.4.1.2544.1.12.22.1.7.1.15DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeResHistoryActualTestDuration
OBJECT-TYPE
This object provides information on the actual test duration in seconds.
1.3.6.1.4.1.2544.1.12.22.1.7.1.16Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryMTIEMaskCrossedTime
OBJECT-TYPE
This object provides the time when the MTIE mask was crossed.
1.3.6.1.4.1.2544.1.12.22.1.7.1.17DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeResHistoryMTIEMaskMarginCrossedTime
OBJECT-TYPE
This object provides the time when the MTIE mask margin was crossed.
1.3.6.1.4.1.2544.1.12.22.1.7.1.18DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeResHistoryStatusMTIEMaskFailed
OBJECT-TYPE
This object provides the result status, whether MTIE Mask has failed.
1.3.6.1.4.1.2544.1.12.22.1.7.1.19TruthValueread-onlycurrent
f3SyncJPTPClockProbeResHistoryStatusMTIEMarginFailed
OBJECT-TYPE
This object provides the result status, whether MTIE Margin has failed.
1.3.6.1.4.1.2544.1.12.22.1.7.1.20TruthValueread-onlycurrent
f3SyncJPTPClockProbeResHistoryStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.21StorageTyperead-createcurrent
f3SyncJPTPClockProbeResHistoryRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPClockProbeResHistoryRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPClockProbeResHistoryRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPClockProbeResHistoryRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.22.1.7.1.22RowStatusread-createcurrent
f3SyncJPTPClockProbeResHistoryMinFFO
OBJECT-TYPE
The Min FFO configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.23Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryMaxFFO
OBJECT-TYPE
The Max FFO configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.24Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryAvgFFO
OBJECT-TYPE
The average FFO configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.25Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryOutOfTargetFFOTime
OBJECT-TYPE
The out of target FFO time configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.26Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryTotalFFOTime
OBJECT-TYPE
The total FFO time configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.27Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryMinPhaseOffset
OBJECT-TYPE
The Min phase offset configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.28Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryMaxPhaseOffset
OBJECT-TYPE
The Max phase offset configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.29Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryAvgPhaseOffset
OBJECT-TYPE
The average phase offset configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.30Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryOutOfTargetPhaseOffsetTime
OBJECT-TYPE
The out of target phase offset time configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.31Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryTotalPhaseOffsetTime
OBJECT-TYPE
The total phase offset time configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.32Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryTeAlertThreshold
OBJECT-TYPE
The TE alert threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.33Integer32read-onlydeprecated
f3SyncJPTPClockProbeResHistoryTeAlertClearThreshold
OBJECT-TYPE
The TE alert clear threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.34Integer32read-onlydeprecated
f3SyncJPTPClockProbeResHistoryLastTEAlertTime
OBJECT-TYPE
The last TE alert time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.35DateAndTimeread-onlydeprecated
f3SyncJPTPClockProbeResHistoryLastTEAlertClearTime
OBJECT-TYPE
The last TE alert clear time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.36DateAndTimeread-onlydeprecated
f3SyncJPTPClockProbeResHistoryRunningFailedCount
OBJECT-TYPE
The running failed count for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.37Integer32read-onlycurrent
f3SyncJPTPClockProbeResHistoryMeasurementType
OBJECT-TYPE
The measurement type configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.38MeasurementTyperead-onlycurrent
f3SyncJPTPClockProbeResHistoryConstTEThreshold
OBJECT-TYPE
The Constant Time Error Alert threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.7.1.39Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryConstTEClrThreshold
OBJECT-TYPE
The Constant Time Error Alert Clear threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.7.1.40Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryConstTEWindow
OBJECT-TYPE
The Averaging window used for Constant TE calculation (sec).
1.3.6.1.4.1.2544.1.12.22.1.7.1.41Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryInstTEThreshold
OBJECT-TYPE
The Instant Time Error Alert threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.7.1.42Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryInstTEClrThreshold
OBJECT-TYPE
The Instant Time Error Alert Clear threshold (ns).
1.3.6.1.4.1.2544.1.12.22.1.7.1.43Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryMaxTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Max TE has been measured
1.3.6.1.4.1.2544.1.12.22.1.7.1.44Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryConstTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Constant TE has been measured.
1.3.6.1.4.1.2544.1.12.22.1.7.1.45Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryInstTETotAlarmTime
OBJECT-TYPE
The Total time in seconds Instant TE has been measured.
1.3.6.1.4.1.2544.1.12.22.1.7.1.46Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistorySlavePortIdentity
OBJECT-TYPE
The Tested Slave Port Identity.
1.3.6.1.4.1.2544.1.12.22.1.7.1.47DisplayString (SIZE(1..20))read-onlycurrent
f3SyncJPTPClockProbeResHistoryMasterPortIdentity
OBJECT-TYPE
The Tested Master Port Identity.
1.3.6.1.4.1.2544.1.12.22.1.7.1.48DisplayString (SIZE(1..20))read-onlycurrent
f3SyncJPTPClockProbeResHistoryConstTEMeasurementTime
OBJECT-TYPE
The Const TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.49Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryMaxTEMeasurementTime
OBJECT-TYPE
The Max TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.50Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryInstTEMeasurementTime
OBJECT-TYPE
The Inst TE Measurement Time for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.51Unsigned32read-onlycurrent
f3SyncJPTPClockProbeResHistoryMaxTEThreshold
OBJECT-TYPE
The TE Max threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.52Integer32read-writecurrent
f3SyncJPTPClockProbeResHistoryMaxTEClrThreshold
OBJECT-TYPE
The TE Max clear threshold configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.7.1.53Integer32read-writecurrent
f3SyncJPTPClockProbeResHistoryMTIEValueTable
OBJECT-TYPE
A list of histgory entries corresponding to the PTP Clock Probe's MTIE Result Values.
1.3.6.1.4.1.2544.1.12.22.1.8not-accessiblecurrent
f3SyncJPTPClockProbeResHistoryMTIEValueEntry
OBJECT-TYPE
An entry containing information applicable to a particular PTP Clock Probe's MTIE Result Value.
1.3.6.1.4.1.2544.1.12.22.1.8.1not-accessiblecurrent
f3SyncJPTPClockProbeResHistoryMTIEValueIndex
OBJECT-TYPE
Unique index value associated with the PTP Clock Probe History Result Value.
1.3.6.1.4.1.2544.1.12.22.1.8.1.1Integer32not-accessiblecurrent
f3SyncJPTPClockProbeResHistoryMTIEValue
OBJECT-TYPE
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.8.1.2Integer32read-onlycurrent
f3SyncJPTPNetworkProbeTable
OBJECT-TYPE
A list of entries corresponding to the SyncJack PTP Network Probes.
1.3.6.1.4.1.2544.1.12.22.1.9not-accessiblecurrent
f3SyncJPTPNetworkProbeEntry
OBJECT-TYPE
An entry containing information applicable to a particular SyncJack PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.1.9.1not-accessiblecurrent
f3SyncJPTPNetworkProbeIndex
OBJECT-TYPE
Unique index value associated with the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.1.9.1.1Integer32not-accessiblecurrent
f3SyncJPTPNetworkProbeName
OBJECT-TYPE
This object allows SNMP management entities to provide a name to the PTP Network Probe entity.
1.3.6.1.4.1.2544.1.12.22.1.9.1.2DisplayString (SIZE(0..16))read-createcurrent
f3SyncJPTPNetworkProbeAdminState
OBJECT-TYPE
This object represents the Administrative State of the PTP Network Probe. This is not externally managed.
1.3.6.1.4.1.2544.1.12.22.1.9.1.3AdminStateread-onlycurrent
f3SyncJPTPNetworkProbeOperationalState
OBJECT-TYPE
This object represents the Operational State of the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.1.9.1.4OperationalStateread-onlycurrent
f3SyncJPTPNetworkProbeSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.1.9.1.5SecondaryStateread-onlycurrent
f3SyncJPTPNetworkProbePTPFlowPoint
OBJECT-TYPE
This object allows SNMP management entities to specify the PTP Flow Point to use as source for PTP Network Probe measurements.
1.3.6.1.4.1.2544.1.12.22.1.9.1.6VariablePointerread-createcurrent
f3SyncJPTPNetworkProbeIpPrototocol
OBJECT-TYPE
This object allows SNMP management entities to specify the IP Protocol used for PTP communication.
1.3.6.1.4.1.2544.1.12.22.1.9.1.7IpVersionread-writecurrent
f3SyncJPTPNetworkProbeSlaveIpV4Address
OBJECT-TYPE
This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.1.9.1.8IpAddressread-writecurrent
f3SyncJPTPNetworkProbeMasterIpV4Address
OBJECT-TYPE
This object allows SNMP management entities to specify the Master IP Address associated with the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.1.9.1.9IpAddressread-writecurrent
f3SyncJPTPNetworkProbeReference
OBJECT-TYPE
This object allows setting up of the PTP Network Probe Reference Entity.
1.3.6.1.4.1.2544.1.12.22.1.9.1.10VariablePointerread-writecurrent
f3SyncJPTPNetworkProbeExpectedQL
OBJECT-TYPE
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
1.3.6.1.4.1.2544.1.12.22.1.9.1.11SSMQualityLevelread-writecurrent
f3SyncJPTPNetworkProbeActualTestStartTime
OBJECT-TYPE
This object provides information on the actual test start time.
1.3.6.1.4.1.2544.1.12.22.1.9.1.12DateAndTimeread-onlycurrent
f3SyncJPTPNetworkProbeActualTestDuration
OBJECT-TYPE
This object provides information on the actual test duration in seconds.
1.3.6.1.4.1.2544.1.12.22.1.9.1.13Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbePDVAssuredHi
OBJECT-TYPE
This object allows configuration of the higher order 32 bits of the assured level packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
1.3.6.1.4.1.2544.1.12.22.1.9.1.14Unsigned32read-writecurrent
f3SyncJPTPNetworkProbePDVAssuredLo
OBJECT-TYPE
This object allows configuration of the lower order 32 bits of the assured level packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
1.3.6.1.4.1.2544.1.12.22.1.9.1.15Unsigned32read-writecurrent
f3SyncJPTPNetworkProbePDVSatisfiedHi
OBJECT-TYPE
This object allows configuration of the higher order 32 bits of the satisfied level of packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
1.3.6.1.4.1.2544.1.12.22.1.9.1.16Unsigned32read-writecurrent
f3SyncJPTPNetworkProbePDVSatisfiedLo
OBJECT-TYPE
This object allows configuration of the lower order 32 bits of the satisfied level of packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
1.3.6.1.4.1.2544.1.12.22.1.9.1.17Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeResPDVFwdLowRange
OBJECT-TYPE
This object allows configuration of the low range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.9.1.18Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeResPDVFwdMediumRange
OBJECT-TYPE
This object allows configuration of the medium range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.9.1.19Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeResPDVFwdHighRange
OBJECT-TYPE
This object allows configuration of the high range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.9.1.20Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeResPDVRevLowRange
OBJECT-TYPE
This object allows configuration of the low range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.9.1.21Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeResPDVRevMediumRange
OBJECT-TYPE
This object allows configuration of the medium range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.9.1.22Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeResPDVRevHighRange
OBJECT-TYPE
This object allows configuration of the high range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.9.1.23Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeScheduler
OBJECT-TYPE
This object provides the associated scheduler instance, if one exists, with this PTP Network Probe. This value is 0.0, if there is no scheduler associated with the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.1.9.1.24VariablePointerread-onlycurrent
f3SyncJPTPNetworkProbeTestState
OBJECT-TYPE
This object provides the PTP Network Probe test state.
1.3.6.1.4.1.2544.1.12.22.1.9.1.25SyncJackTestStateread-onlycurrent
f3SyncJPTPNetworkProbeNoTimestampFailure
OBJECT-TYPE
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
1.3.6.1.4.1.2544.1.12.22.1.9.1.26TruthValueread-onlycurrent
f3SyncJPTPNetworkProbeNoEventMessageFailure
OBJECT-TYPE
This object provides information on whether the measured PTP source indicated a no-event message failure.
1.3.6.1.4.1.2544.1.12.22.1.9.1.27TruthValueread-onlycurrent
f3SyncJPTPNetworkProbeFwdScore
OBJECT-TYPE
This object provides the current score in the forward direction.
1.3.6.1.4.1.2544.1.12.22.1.9.1.28Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeRevScore
OBJECT-TYPE
This object provides the current score in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.1.9.1.29Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeReferenceFailure
OBJECT-TYPE
This object provides information on whether the reference failed.
1.3.6.1.4.1.2544.1.12.22.1.9.1.30TruthValueread-onlycurrent
f3SyncJPTPNetworkProbeStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.9.1.31StorageTyperead-createcurrent
f3SyncJPTPNetworkProbeRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPNetworkProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPNetworkProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPNetworkProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.22.1.9.1.32RowStatusread-createcurrent
f3SyncJPTPNetworkProbeResultsAvailable
OBJECT-TYPE
The results available configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.9.1.33TruthValueread-onlycurrent
f3SyncJScheduleGroupTable
OBJECT-TYPE
A list of entries that allow a set of SyncJack Clock Probes, PTP Clock Probes and PTP Network Probes to be scheduled.
1.3.6.1.4.1.2544.1.12.22.1.10not-accessiblecurrent
f3SyncJScheduleGroupEntry
OBJECT-TYPE
A row in f3SyncJScheduleGroupTable. Entries are created in this table by management application action.
1.3.6.1.4.1.2544.1.12.22.1.10.1not-accessiblecurrent
f3SyncJScheduleGroupIndex
OBJECT-TYPE
A unique index to distinguish the SyncJack Schedule Group.
1.3.6.1.4.1.2544.1.12.22.1.10.1.1Integer32not-accessiblecurrent
f3SyncJScheduleGroupDescr
OBJECT-TYPE
Description of the SyncJack schedule group.
1.3.6.1.4.1.2544.1.12.22.1.10.1.2DisplayString (SIZE(1..256))read-createcurrent
f3SyncJScheduleGroupEntityList
OBJECT-TYPE
A comma separated list of Clock Probes, PTP Clock Probes and PTP Network Probes, that will have the same schedule.
1.3.6.1.4.1.2544.1.12.22.1.10.1.3DisplayString (SIZE(1..512))read-createcurrent
f3SyncJScheduleGroupType
OBJECT-TYPE
This object allows to specify the schedule group type of the SyncJack Schedule group. Only 'one-shot' is supported.
1.3.6.1.4.1.2544.1.12.22.1.10.1.4ScheduleTyperead-createcurrent
f3SyncJScheduleGroupStartTime
OBJECT-TYPE
This object allows specification of the start time of the SyncJack Schedule Group. Value of time less than current system time will equate to current time. When the system time reaches this configured time, the SyncJack Schedule Group will be activated.
1.3.6.1.4.1.2544.1.12.22.1.10.1.5DateAndTimeread-createcurrent
f3SyncJScheduleGroupDuration
OBJECT-TYPE
This object allows specification of the duration in 'seconds' for SyncJack Schedule Group run. Note that a value of 4294967295 means Duration as FOREVER.
1.3.6.1.4.1.2544.1.12.22.1.10.1.6Unsigned32read-createcurrent
f3SyncJScheduleGroupStatus
OBJECT-TYPE
This object indicates the current status of the SyncJack Schedule Group.
1.3.6.1.4.1.2544.1.12.22.1.10.1.7SchedActivityStatusread-onlycurrent
f3SyncJScheduleGroupStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.10.1.8StorageTyperead-createcurrent
f3SyncJScheduleGroupRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJScheduleGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJScheduleGroupRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3SyncJScheduleGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.22.1.10.1.9RowStatusread-createcurrent
f3UserDefinedMTIEMaskTable
OBJECT-TYPE
A list of entries that enable the user to define a new (only one) MTIE mask for Clock Probe and for PTP clock Probe. .
1.3.6.1.4.1.2544.1.12.22.1.11not-accessiblecurrent
f3UserDefinedMTIEMaskEntry
OBJECT-TYPE
A row in f3UserDefinedMTIEMaskTable. Entries are created in this table by management application action.
1.3.6.1.4.1.2544.1.12.22.1.11.1not-accessiblecurrent
f3UserDefinedMTIEMaskIndex
OBJECT-TYPE
A unique index to distinguish the User Defined MTIE Mask.
1.3.6.1.4.1.2544.1.12.22.1.11.1.1Integer32not-accessiblecurrent
f3UserDefinedMTIEMaskName
OBJECT-TYPE
This object allows SNMP management entities to provide a name to the User Defined MTIE Mask entity.
1.3.6.1.4.1.2544.1.12.22.1.11.1.2DisplayString (SIZE(1..16))read-createcurrent
f3UserDefinedMTIEMaskDisplayPoints
OBJECT-TYPE
This object allows to specify the coordinates point in form of x,y pairs separated by semicolon. X values are in seconds, y values are in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.11.1.3DisplayString (SIZE(1..1024))read-createcurrent
f3UserDefinedMTIEMaskMeasurmentPoints
OBJECT-TYPE
This object allows specification of the measurement intervals y-points in nanoseconds.
1.3.6.1.4.1.2544.1.12.22.1.11.1.4DisplayString (SIZE(1..256))read-createcurrent
f3UserDefinedMTIEMaskStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.22.1.11.1.5StorageTyperead-createcurrent
f3UserDefinedMTIEMaskRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3UserDefinedMTIEMaskRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UserDefinedMTIEMaskRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3UserDefinedMTIEMaskRowStatus object may be modified if f3UserDefinedMTIEMaskEntry of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.22.1.11.1.6RowStatusread-createcurrent
f3SyncJPerformanceObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.22.2
f3SyncJPTPNetworkProbeStatsTable
OBJECT-TYPE
A collection of SyncJack PTP Network Probe statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.22.2.1not-accessiblecurrent
f3SyncJPTPNetworkProbeStatsEntry
OBJECT-TYPE
A conceptual row in the f3SyncJPTPNetworkProbeStatsTable. Entries exist in this table for each PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1not-accessiblecurrent
f3SyncJPTPNetworkProbeStatsIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this PTPNetworkProbe statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.22.2.1.1.1Integer32 (1..3)not-accessiblecurrent
f3SyncJPTPNetworkProbeStatsIntervalType
OBJECT-TYPE
Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover.
1.3.6.1.4.1.2544.1.12.22.2.1.1.2CmPmIntervalTyperead-onlycurrent
f3SyncJPTPNetworkProbeStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.22.2.1.1.3TruthValueread-onlycurrent
f3SyncJPTPNetworkProbeStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.22.2.1.1.4CmPmBinActionread-writecurrent
f3SyncJPTPNetworkProbeStatsSyncMsgsRx
OBJECT-TYPE
Number of PTP Sync messages received at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.5PerfCounter32read-onlycurrent
f3SyncJPTPNetworkProbeStatsDelayRspMsgsRx
OBJECT-TYPE
Number of PTP Delay Response messages received at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.6PerfCounter32read-onlycurrent
f3SyncJPTPNetworkProbeStatsLostSyncMsgs
OBJECT-TYPE
Number of PTP Sync messages counted as lost at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.7PerfCounter32read-onlycurrent
f3SyncJPTPNetworkProbeStatsLostDelayRspMsgs
OBJECT-TYPE
Number of PTP Delay Response messages counted as lost at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.8PerfCounter32read-onlycurrent
f3SyncJPTPNetworkProbeStatsMinMeanPathDelay
OBJECT-TYPE
Minimum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.9ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsMaxMeanPathDelay
OBJECT-TYPE
Maximum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.10ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsAvgMeanPathDelay
OBJECT-TYPE
Average Mean Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.11ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsMinSyncPathDelay
OBJECT-TYPE
Minimum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.12ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsMaxSyncPathDelay
OBJECT-TYPE
Maximum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.13ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsAvgSyncPathDelay
OBJECT-TYPE
Average Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.14ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsAvgResPDVFwd
OBJECT-TYPE
Average Residual Packet Delay Variation in nanoseconds in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.15ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsResPDVFwdLow
OBJECT-TYPE
Total number of Low Range Residual Packet Delay Variation results in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.16Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsResPDVFwdMedium
OBJECT-TYPE
Total number of Medium Range Residual Packet Delay Variation results in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.17Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsResPDVFwdHigh
OBJECT-TYPE
Total number of High Range Residual Packet Delay Variation results in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.18Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsResPDVFwdTotal
OBJECT-TYPE
Total number of Residual Packet Delay Variation results in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.19Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsFwdScore5
OBJECT-TYPE
Total time the network usability score is 5 in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.20Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsFwdScore4
OBJECT-TYPE
Total time the network usability score is 4 in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.21Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsFwdScore3
OBJECT-TYPE
Total time the network usability score is 3 in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.22Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsAvgResPDVRev
OBJECT-TYPE
Average Residual Packet Delay Variation in nanoseconds in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.23ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsResPDVRevLow
OBJECT-TYPE
Total number of Low Range Residual Packet Delay Variation results in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.24Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsResPDVRevMedium
OBJECT-TYPE
Total number of Medium Range Residual Packet Delay Variation results in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.25Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsResPDVRevHigh
OBJECT-TYPE
Total number of High Range Residual Packet Delay Variation results in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.26Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsResPDVRevTotal
OBJECT-TYPE
Total number of Residual Packet Delay Variation results in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.27Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsRevScore5
OBJECT-TYPE
Total time the network usability score is 5 in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.28Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsRevScore4
OBJECT-TYPE
Total time the network usability score is 4 in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.29Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsRevScore3
OBJECT-TYPE
Total time the network usability score is 3 in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.30Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeStatsMinRPDVFwd
OBJECT-TYPE
Minimum Residual PDV in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.31ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsMinRPDVRev
OBJECT-TYPE
Minimum Residual PDV in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.1.1.32ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsMinPathAsymmetry
OBJECT-TYPE
The min path asymmetry for this entry.
1.3.6.1.4.1.2544.1.12.22.2.1.1.33Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeStatsMaxPathAsymmetry
OBJECT-TYPE
The max path asymmetry for this entry.
1.3.6.1.4.1.2544.1.12.22.2.1.1.34Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeStatsAvgPathAsymmetry
OBJECT-TYPE
The average path asymmetry for this entry.
1.3.6.1.4.1.2544.1.12.22.2.1.1.35Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeStatsPathLossSecondsFwd
OBJECT-TYPE
The path loss seconds forwarded for this entry.
1.3.6.1.4.1.2544.1.12.22.2.1.1.36Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeStatsPathLossSecondsRev
OBJECT-TYPE
The path loss seconds reverted for this entry.
1.3.6.1.4.1.2544.1.12.22.2.1.1.37Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeStatsMinDelayReqPathDelay
OBJECT-TYPE
Minimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.38ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsMaxDelayReqPathDelay
OBJECT-TYPE
Maximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.39ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeStatsAvgDelayReqPathDelay
OBJECT-TYPE
Average Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.1.1.40ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryTable
OBJECT-TYPE
A collection of SyncJack PTP Network Probe statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.22.2.2not-accessiblecurrent
f3SyncJPTPNetworkProbeHistoryEntry
OBJECT-TYPE
A conceptual row in the f3SyncJPTPNetworkProbeHistoryTable. Entries exist in this table for each PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1not-accessiblecurrent
f3SyncJPTPNetworkProbeHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this SyncJack PTP Network Probe PM history entry.
1.3.6.1.4.1.2544.1.12.22.2.2.1.1Integer32 (1..32)not-accessiblecurrent
f3SyncJPTPNetworkProbeHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.22.2.2.1.2DateAndTimeread-onlycurrent
f3SyncJPTPNetworkProbeHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.22.2.2.1.3TruthValueread-onlycurrent
f3SyncJPTPNetworkProbeHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.22.2.2.1.4CmPmBinActionread-writecurrent
f3SyncJPTPNetworkProbeHistorySyncMsgsRx
OBJECT-TYPE
Number of PTP Sync messages received at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.5PerfCounter32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryDelayRspMsgsRx
OBJECT-TYPE
Number of PTP Delay Response messages received at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.6PerfCounter32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryLostSyncMsgs
OBJECT-TYPE
Number of PTP Sync messages counted as lost at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.7PerfCounter32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryLostDelayRspMsgs
OBJECT-TYPE
Number of PTP Delay Response messages counted as lost at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.8PerfCounter32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryMinMeanPathDelay
OBJECT-TYPE
Minimum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.9ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryMaxMeanPathDelay
OBJECT-TYPE
Maximum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.10ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryAvgMeanPathDelay
OBJECT-TYPE
Average Mean Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.11ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryMinSyncPathDelay
OBJECT-TYPE
Minimum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.12ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryMaxSyncPathDelay
OBJECT-TYPE
Maximum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.13ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryAvgSyncPathDelay
OBJECT-TYPE
Average Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.14ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryAvgResPDVFwd
OBJECT-TYPE
Average Residual Packet Delay Variation in nanoseconds in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.15ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryResPDVFwdLow
OBJECT-TYPE
Total number of Low Range Residual Packet Delay Variation results in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.16Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryResPDVFwdMedium
OBJECT-TYPE
Total number of Medium Range Residual Packet Delay Variation results in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.17Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryResPDVFwdHigh
OBJECT-TYPE
Total number of High Range Residual Packet Delay Variation results in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.18Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryResPDVFwdTotal
OBJECT-TYPE
Total number of Residual Packet Delay Variation results in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.19Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryFwdScore5
OBJECT-TYPE
Total time the network usability score is 5 in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.20Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryFwdScore4
OBJECT-TYPE
Total time the network usability score is 4 in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.21Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryFwdScore3
OBJECT-TYPE
Total time the network usability score is 3 in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.22Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryAvgResPDVRev
OBJECT-TYPE
Average Residual Packet Delay Variation in nanoseconds in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.23ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryResPDVRevLow
OBJECT-TYPE
Total number of Low Range Residual Packet Delay Variation results in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.24Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryResPDVRevMedium
OBJECT-TYPE
Total number of Medium Range Residual Packet Delay Variation results in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.25Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryResPDVRevHigh
OBJECT-TYPE
Total number of High Range Residual Packet Delay Variation results in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.26Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryResPDVRevTotal
OBJECT-TYPE
Total number of Residual Packet Delay Variation results in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.27Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryRevScore5
OBJECT-TYPE
Total time the network usability score is 5 in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.28Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryRevScore4
OBJECT-TYPE
Total time the network usability score is 4 in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.29Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryRevScore3
OBJECT-TYPE
Total time the network usability score is 3 in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.30Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryMinRPDVFwd
OBJECT-TYPE
Minimum Residual PDV in the forward direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.31ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryMinRPDVRev
OBJECT-TYPE
Minimum Residual PDV in the reverse direction.
1.3.6.1.4.1.2544.1.12.22.2.2.1.32ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryMinPathAsymmetry
OBJECT-TYPE
The min path asymmetry for this entry.
1.3.6.1.4.1.2544.1.12.22.2.2.1.33Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryMaxPathAsymmetry
OBJECT-TYPE
The max path asymmetry for this entry.
1.3.6.1.4.1.2544.1.12.22.2.2.1.34Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryAvgPathAsymmetry
OBJECT-TYPE
The average path asymmetry for this entry.
1.3.6.1.4.1.2544.1.12.22.2.2.1.35Unsigned32read-onlycurrent
f3SyncJPTPNetworkProbeHistoryMinDelayReqPathDelay
OBJECT-TYPE
Minimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.36ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryMaxDelayReqPathDelay
OBJECT-TYPE
Maximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.37ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeHistoryAvgDelayReqPathDelay
OBJECT-TYPE
Average Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.2.2.1.38ScaledNanosecondsread-onlycurrent
f3SyncJPTPNetworkProbeThresholdTable
OBJECT-TYPE
A table of entries that allow support the PTP Network Probe Thresholds.
1.3.6.1.4.1.2544.1.12.22.2.3not-accessiblecurrent
f3SyncJPTPNetworkProbeThresholdEntry
OBJECT-TYPE
A conceptual row in the f3SyncJPTPNetworkProbeThresholdTable.
1.3.6.1.4.1.2544.1.12.22.2.3.1not-accessiblecurrent
f3SyncJPTPNetworkProbeThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3SyncJPTPNetworkProbeThresholdTable.
1.3.6.1.4.1.2544.1.12.22.2.3.1.1Integer32 (1..65535)not-accessiblecurrent
f3SyncJPTPNetworkProbeThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.22.2.3.1.2CmPmIntervalTyperead-onlycurrent
f3SyncJPTPNetworkProbeThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.22.2.3.1.3VariablePointerread-onlycurrent
f3SyncJPTPNetworkProbeThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.22.2.3.1.4Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.22.2.3.1.5Unsigned32read-writecurrent
f3SyncJPTPNetworkProbeThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3SyncJPTPNetworkProbeThresholdVariable.
1.3.6.1.4.1.2544.1.12.22.2.3.1.6PerfCounter64read-onlycurrent
f3SyncJClockProbeStatsTable
OBJECT-TYPE
A collection of SyncJack Clock Probe statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.22.2.4not-accessiblecurrent
f3SyncJClockProbeStatsEntry
OBJECT-TYPE
A conceptual row in the f3SyncJClockProbeStatsTable. Entries exist in this table for each Clock Probe.
1.3.6.1.4.1.2544.1.12.22.2.4.1not-accessiblecurrent
f3SyncJClockProbeStatsIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this PTPNetworkProbe statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.22.2.4.1.1Integer32 (1..3)not-accessiblecurrent
f3SyncJClockProbeStatsIntervalType
OBJECT-TYPE
Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover.
1.3.6.1.4.1.2544.1.12.22.2.4.1.2CmPmIntervalTyperead-onlycurrent
f3SyncJClockProbeStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.22.2.4.1.3TruthValueread-onlycurrent
f3SyncJClockProbeStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.22.2.4.1.4CmPmBinActionread-writecurrent
f3SyncJClockProbeStatsMTIE1s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 1s observation window.
1.3.6.1.4.1.2544.1.12.22.2.4.1.5Unsigned32read-onlycurrent
f3SyncJClockProbeStatsMTIE10s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 10s observation window.
1.3.6.1.4.1.2544.1.12.22.2.4.1.6Unsigned32read-onlycurrent
f3SyncJClockProbeStatsMTIE100s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 100s observation window.
1.3.6.1.4.1.2544.1.12.22.2.4.1.7Unsigned32read-onlycurrent
f3SyncJClockProbeStatsMTIE1000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 1000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.4.1.8Unsigned32read-onlycurrent
f3SyncJClockProbeStatsMTIE10000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 10000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.4.1.9Unsigned32read-onlycurrent
f3SyncJClockProbeStatsMTIE50000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 50000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.4.1.10Unsigned32read-onlycurrent
f3SyncJClockProbeStatsMaxTE
OBJECT-TYPE
This attribute indicates maximum TE value in ns observed over PM interval.
1.3.6.1.4.1.2544.1.12.22.2.4.1.11Integer32read-onlycurrent
f3SyncJClockProbeStatsMaxConstTE
OBJECT-TYPE
This attribute indicates maximum constant TE value in ns observed over PM interval.
1.3.6.1.4.1.2544.1.12.22.2.4.1.12Integer32read-onlycurrent
f3SyncJClockProbeHistoryTable
OBJECT-TYPE
A collection of SyncJack Clock Probe statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.22.2.5not-accessiblecurrent
f3SyncJClockProbeHistoryEntry
OBJECT-TYPE
A conceptual row in the f3SyncJClockProbeHistoryTable. Entries exist in this table for each Clock Probe.
1.3.6.1.4.1.2544.1.12.22.2.5.1not-accessiblecurrent
f3SyncJClockProbeHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this SyncJack Clock Probe PM history entry.
1.3.6.1.4.1.2544.1.12.22.2.5.1.1Integer32 (1..32)not-accessiblecurrent
f3SyncJClockProbeHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.22.2.5.1.2DateAndTimeread-onlycurrent
f3SyncJClockProbeHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.22.2.5.1.3TruthValueread-onlycurrent
f3SyncJClockProbeHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.22.2.5.1.4CmPmBinActionread-writecurrent
f3SyncJClockProbeHistoryMTIE1s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 1s observation window.
1.3.6.1.4.1.2544.1.12.22.2.5.1.5Unsigned32read-onlycurrent
f3SyncJClockProbeHistoryMTIE10s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 10s observation window.
1.3.6.1.4.1.2544.1.12.22.2.5.1.6Unsigned32read-onlycurrent
f3SyncJClockProbeHistoryMTIE100s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 100s observation window.
1.3.6.1.4.1.2544.1.12.22.2.5.1.7Unsigned32read-onlycurrent
f3SyncJClockProbeHistoryMTIE1000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 1000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.5.1.8Unsigned32read-onlycurrent
f3SyncJClockProbeHistoryMTIE10000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 10000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.5.1.9Unsigned32read-onlycurrent
f3SyncJClockProbeHistoryMTIE50000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 50000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.5.1.10Unsigned32read-onlycurrent
f3SyncJClockProbeHistoryMaxTE
OBJECT-TYPE
This attribute indicates maximum TE value in ns observed over PM interval.
1.3.6.1.4.1.2544.1.12.22.2.5.1.11Integer32read-onlycurrent
f3SyncJClockProbeHistoryMaxConstTE
OBJECT-TYPE
This attribute indicates maximum constant TE value in ns observed over PM interval.
1.3.6.1.4.1.2544.1.12.22.2.5.1.12Integer32read-onlycurrent
f3SyncJClockProbeThresholdTable
OBJECT-TYPE
A table of entries that allow support the Clock Probe Thresholds.
1.3.6.1.4.1.2544.1.12.22.2.6not-accessiblecurrent
f3SyncJClockProbeThresholdEntry
OBJECT-TYPE
A conceptual row in the f3SyncJClockProbeThresholdTable.
1.3.6.1.4.1.2544.1.12.22.2.6.1not-accessiblecurrent
f3SyncJClockProbeThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3SyncJClockProbeThresholdTable.
1.3.6.1.4.1.2544.1.12.22.2.6.1.1Integer32 (1..65535)not-accessiblecurrent
f3SyncJClockProbeThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.22.2.6.1.2CmPmIntervalTyperead-onlycurrent
f3SyncJClockProbeThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.22.2.6.1.3VariablePointerread-onlycurrent
f3SyncJClockProbeThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.22.2.6.1.4Unsigned32read-writecurrent
f3SyncJClockProbeThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.22.2.6.1.5Unsigned32read-writecurrent
f3SyncJClockProbeThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3SyncJClockProbeThresholdVariable.
1.3.6.1.4.1.2544.1.12.22.2.6.1.6PerfCounter64read-onlycurrent
f3SyncJPTPClockProbeStatsTable
OBJECT-TYPE
A collection of SyncJack PTP Clock Probe statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.22.2.7not-accessiblecurrent
f3SyncJPTPClockProbeStatsEntry
OBJECT-TYPE
A conceptual row in the f3SyncJPTPClockProbeStatsTable. Entries exist in this table for each PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.2.7.1not-accessiblecurrent
f3SyncJPTPClockProbeStatsIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this PTPNetworkProbe statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.22.2.7.1.1Integer32 (1..3)not-accessiblecurrent
f3SyncJPTPClockProbeStatsIntervalType
OBJECT-TYPE
Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover.
1.3.6.1.4.1.2544.1.12.22.2.7.1.2CmPmIntervalTyperead-onlycurrent
f3SyncJPTPClockProbeStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.22.2.7.1.3TruthValueread-onlycurrent
f3SyncJPTPClockProbeStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.22.2.7.1.4CmPmBinActionread-writecurrent
f3SyncJPTPClockProbeStatsMTIE1s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 1s observation window.
1.3.6.1.4.1.2544.1.12.22.2.7.1.5Unsigned32read-onlycurrent
f3SyncJPTPClockProbeStatsMTIE10s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 10s observation window.
1.3.6.1.4.1.2544.1.12.22.2.7.1.6Unsigned32read-onlycurrent
f3SyncJPTPClockProbeStatsMTIE100s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 100s observation window.
1.3.6.1.4.1.2544.1.12.22.2.7.1.7Unsigned32read-onlycurrent
f3SyncJPTPClockProbeStatsMTIE1000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 1000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.7.1.8Unsigned32read-onlycurrent
f3SyncJPTPClockProbeStatsMTIE10000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 10000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.7.1.9Unsigned32read-onlycurrent
f3SyncJPTPClockProbeStatsMTIE50000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 50000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.7.1.10Unsigned32read-onlycurrent
f3SyncJPTPClockProbeStatsMaxTE
OBJECT-TYPE
This attribute indicates maximum TE value in ns observed over PM interval.
1.3.6.1.4.1.2544.1.12.22.2.7.1.11Integer32read-onlycurrent
f3SyncJPTPClockProbeStatsMaxConstTE
OBJECT-TYPE
This attribute indicates maximum constant TE value in ns observed over PM interval.
1.3.6.1.4.1.2544.1.12.22.2.7.1.12Integer32read-onlycurrent
f3SyncJPTPClockProbeHistoryTable
OBJECT-TYPE
A collection of SyncJack PTP Clock Probe statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.22.2.8not-accessiblecurrent
f3SyncJPTPClockProbeHistoryEntry
OBJECT-TYPE
A conceptual row in the f3SyncJPTPClockProbeHistoryTable. Entries exist in this table for each PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.2.8.1not-accessiblecurrent
f3SyncJPTPClockProbeHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this SyncJack PTP Clock Probe PM history entry.
1.3.6.1.4.1.2544.1.12.22.2.8.1.1Integer32 (1..32)not-accessiblecurrent
f3SyncJPTPClockProbeHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.22.2.8.1.2DateAndTimeread-onlycurrent
f3SyncJPTPClockProbeHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.22.2.8.1.3TruthValueread-onlycurrent
f3SyncJPTPClockProbeHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.22.2.8.1.4CmPmBinActionread-writecurrent
f3SyncJPTPClockProbeHistoryMTIE1s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 1s observation window.
1.3.6.1.4.1.2544.1.12.22.2.8.1.5Unsigned32read-onlycurrent
f3SyncJPTPClockProbeHistoryMTIE10s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 10s observation window.
1.3.6.1.4.1.2544.1.12.22.2.8.1.6Unsigned32read-onlycurrent
f3SyncJPTPClockProbeHistoryMTIE100s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 100s observation window.
1.3.6.1.4.1.2544.1.12.22.2.8.1.7Unsigned32read-onlycurrent
f3SyncJPTPClockProbeHistoryMTIE1000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 1000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.8.1.8Unsigned32read-onlycurrent
f3SyncJPTPClockProbeHistoryMTIE10000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 10000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.8.1.9Unsigned32read-onlycurrent
f3SyncJPTPClockProbeHistoryMTIE50000s
OBJECT-TYPE
This attribute indicates MTIE value in ns for 50000s observation window.
1.3.6.1.4.1.2544.1.12.22.2.8.1.10Unsigned32read-onlycurrent
f3SyncJPTPClockProbeHistoryMaxTE
OBJECT-TYPE
This attribute indicates maximum TE value in ns observed over PM interval.
1.3.6.1.4.1.2544.1.12.22.2.8.1.11Integer32read-onlycurrent
f3SyncJPTPClockProbeHistoryMaxConstTE
OBJECT-TYPE
This attribute indicates maximum constant TE value in ns observed over PM interval.
1.3.6.1.4.1.2544.1.12.22.2.8.1.12Integer32read-onlycurrent
f3SyncJPTPClockProbeThresholdTable
OBJECT-TYPE
A table of entries that allow support the PTP Clock Probe Thresholds.
1.3.6.1.4.1.2544.1.12.22.2.9not-accessiblecurrent
f3SyncJPTPClockProbeThresholdEntry
OBJECT-TYPE
A conceptual row in the f3SyncJPTPClockProbeThresholdTable.
1.3.6.1.4.1.2544.1.12.22.2.9.1not-accessiblecurrent
f3SyncJPTPClockProbeThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3SyncJPTPClockProbeThresholdTable.
1.3.6.1.4.1.2544.1.12.22.2.9.1.1Integer32 (1..65535)not-accessiblecurrent
f3SyncJPTPClockProbeThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.22.2.9.1.2CmPmIntervalTyperead-onlycurrent
f3SyncJPTPClockProbeThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.22.2.9.1.3VariablePointerread-onlycurrent
f3SyncJPTPClockProbeThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.22.2.9.1.4Unsigned32read-writecurrent
f3SyncJPTPClockProbeThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.22.2.9.1.5Unsigned32read-writecurrent
f3SyncJPTPClockProbeThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3SyncJPTPClockProbeThresholdVariable.
1.3.6.1.4.1.2544.1.12.22.2.9.1.6PerfCounter64read-onlycurrent
f3SyncJNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.22.3
f3SyncJConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.22.4
f3SyncJCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.22.4.1
f3SyncJGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.22.4.2

Notifications

NameOIDStatus
f3SyncJPTPNetworkProbeThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an PTP Network Probe is crossed.
1.3.6.1.4.1.2544.1.12.22.3.1current
f3SyncJClockProbeStatusChangeTrap
NOTIFICATION-TYPE
This trap is sent each time any status changes happen on a SyncJack Clock Probe.
1.3.6.1.4.1.2544.1.12.22.3.2current
f3SyncJPTPClockProbeStatusChangeTrap
NOTIFICATION-TYPE
This trap is sent each time any status changes happen on a SyncJack PTP Clock Probe.
1.3.6.1.4.1.2544.1.12.22.3.3current
f3SyncJPTPNetworkProbeStatusChangeTrap
NOTIFICATION-TYPE
This trap is sent each time any status changes happen on a SyncJack PTP Network Probe.
1.3.6.1.4.1.2544.1.12.22.3.4current
f3SyncJClockProbeThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an Clock Probe is crossed.
1.3.6.1.4.1.2544.1.12.22.3.5current
f3SyncJPTPClockProbeThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an PTP Clock Probe is crossed.
1.3.6.1.4.1.2544.1.12.22.3.6current

Conformance

NameOIDStatus
f3SyncJCompliance
MODULE-COMPLIANCE
Describes the requirements for conformance to the F3 SyncJack group.
1.3.6.1.4.1.2544.1.12.22.4.1.1current
f3SyncJObjectGroup
OBJECT-GROUP
A collection of objects used to manage the F3 SyncJack Configuration data.
1.3.6.1.4.1.2544.1.12.22.4.2.1current
f3SyncJPerfObjectGroup
OBJECT-GROUP
A collection of objects used to manage the F3 SyncJack Performance data.
1.3.6.1.4.1.2544.1.12.22.4.2.2current
f3SyncJNotifGroup
NOTIFICATION-GROUP
A collection of notifications related to F3 SyncJack functionality.
1.3.6.1.4.1.2544.1.12.22.4.2.3current