MIBs Depot

CM-ENTITY-MIB

Registered at
1.3.6.1.4.1.2544.1.12.3
Last updated
2021-01-27 00:00
Organization
ADVA Optical Networking SE
Revisions
2021-01-27 00:00
Namespace
adva
Source file
CM-ENTITY-MIB
Digest
sha256:3359d1dad09cf417bca237bde6aed68cd85db4a8181fa244a38c25204c919ca2

Description

This module defines the Entity MIB definitions used by the F3 (FSP150CM/CC) product lines. These definitions are vendor specific extensions to the standard ENTITY MIB (RFC2737). Copyright (C) ADVA.

Contact

Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199

Imports

FromSymbols
ADVA-MIBfsp150cm
CM-COMMON-MIBAdminState, CmPmIntervalType, OperationalState, RestartType, SecondaryState, TDMFrequencySourceType, UsbOperationalMode, VlanId
CM-SYSTEM-MIBCmAutoProvMode
ENTITY-MIBPhysicalIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer

Imported by

28 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADVA-MIB
CM-COMMON-MIB
CM-ENTITY-MIB
CM-SYSTEM-MIB
ENTITY-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
IPV6-TC
LLDP-V2-MIB
LLDP-V2-TC-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-TARGET-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
CardType
TEXTUAL-CONVENTION
Card Type.
current
CmCPMRLinkLossFwdMode
TEXTUAL-CONVENTION
Link Loss Forwarding Mode on the CPMR.
current
LLDPEnableAction
TEXTUAL-CONVENTION
Enable (TxAndRx, Tx-Only, Rx-Only) LLDP or Disable LLDP.
current
LedControlType
TEXTUAL-CONVENTION
.
current
NeProvAction
TEXTUAL-CONVENTION
Network Element Action to accept or decline the Network Element.
current
NetworkElementType
TEXTUAL-CONVENTION
Network Element Type.
current
PSNEncapsulationMode
TEXTUAL-CONVENTION
OCN/STM Card Mode.
current
PWE3E1T1CardMode
TEXTUAL-CONVENTION
OCN/STM Card Mode.
current
PWE3OCNSTMCardMode
TEXTUAL-CONVENTION
OCN/STM Card Mode.
current
PortCarrierType
TEXTUAL-CONVENTION
This attribute is to show/set the SONET/SDH mode and OC3/OC12/STM1/STM4 speed for SONET/SDH.
current
PsuType
TEXTUAL-CONVENTION
Power Supply Type.
current
ResyncType
TEXTUAL-CONVENTION
Enumerations for Resync Type.
current
ShelfAction
TEXTUAL-CONVENTION
Shelf Action.
current
ShelfType
TEXTUAL-CONVENTION
Shelf Type.
current
SlotType
TEXTUAL-CONVENTION
Slot Type.
current
StorageStatus
TEXTUAL-CONVENTION
Enumerations for Storage Status.
current
SwitchPortAction
TEXTUAL-CONVENTION
Switch port action.
current

Objects

NameOIDSyntaxAccessStatus
cmEntityObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.3.1
networkElementTable
OBJECT-TYPE
Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
1.3.6.1.4.1.2544.1.12.3.1.1not-accessiblecurrent
networkElementEntry
OBJECT-TYPE
A conceptual row in the networkElementTable.
1.3.6.1.4.1.2544.1.12.3.1.1.1not-accessiblecurrent
neIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify a NetworkElement.
1.3.6.1.4.1.2544.1.12.3.1.1.1.1Integer32read-onlycurrent
neName
OBJECT-TYPE
An administratively-assigned name for the Network Element. By convention, this is the node's fully-qualified domain name.
1.3.6.1.4.1.2544.1.12.3.1.1.1.2DisplayString (SIZE(0..256))read-createcurrent
neType
OBJECT-TYPE
Type of Network Element.
1.3.6.1.4.1.2544.1.12.3.1.1.1.3NetworkElementTyperead-createcurrent
neContact
OBJECT-TYPE
The textual identification of the contact person for the Network Element, together with information on how to contact this person.
1.3.6.1.4.1.2544.1.12.3.1.1.1.4DisplayString (SIZE(0..256))read-createcurrent
neLocation
OBJECT-TYPE
The physical location of this node (e.g., `telephone closet, 3rd floor').
1.3.6.1.4.1.2544.1.12.3.1.1.1.5DisplayString (SIZE(0..256))read-createcurrent
neDescription
OBJECT-TYPE
A textual description of the Network Element. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
1.3.6.1.4.1.2544.1.12.3.1.1.1.6DisplayString (SIZE(0..256))read-onlycurrent
neCmdPromptPrefix
OBJECT-TYPE
User specified command prompt prefix, used by the CLI, at the Network Element level.
1.3.6.1.4.1.2544.1.12.3.1.1.1.7DisplayString (SIZE(0..64))read-createcurrent
neAccepted
OBJECT-TYPE
Indicates whether or not the Network Element is accepted or not. When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with this object as 'false'. User must invoke the 'accept' action on neProvAction object to accept the NetworkElement.
1.3.6.1.4.1.2544.1.12.3.1.1.1.8TruthValueread-onlycurrent
neFromPort
OBJECT-TYPE
The Network Element port to which this Network Element is connected.
1.3.6.1.4.1.2544.1.12.3.1.1.1.9VariablePointerread-createcurrent
neProvAction
OBJECT-TYPE
When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with 'neAccepted' object as 'false'. User must invoke the 'accept' action on this object to accept the NetworkElement. User can invoke the 'decline' action on this object to decline the NetworkElement.
1.3.6.1.4.1.2544.1.12.3.1.1.1.10NeProvActionread-writecurrent
neStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.1.1.11StorageTyperead-createcurrent
neRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of neRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The neRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.1.1.12RowStatusread-createcurrent
neAutoProvMode
OBJECT-TYPE
Autoprovisioning mode which controls automatic creation of cards plugged into the slots of Network Element. Supported values are off(1) and auto(3). When neAutoProvMode is auto then the cards inserted into the slots of Network Element will be automatically provisioned. When neAutoProvMode is off no auto-provisioning will occur.
1.3.6.1.4.1.2544.1.12.3.1.1.1.13CmAutoProvModeread-createcurrent
neFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the Network Element level. Value of this objec is propagated to all the cards beloning to the Network Element. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.1.1.14CmPmIntervalTyperead-writecurrent
shelfTable
OBJECT-TYPE
Contains information on shelf within the NetworkElement. In the case of FSP150CM, there is a single shelf for each NetworkElement.
1.3.6.1.4.1.2544.1.12.3.1.2not-accessiblecurrent
shelfEntry
OBJECT-TYPE
A conceptual row in the shelfTable.
1.3.6.1.4.1.2544.1.12.3.1.2.1not-accessiblecurrent
shelfIndex
OBJECT-TYPE
An integer index value used to uniquely identify a Shelf within a NetworkElement.
1.3.6.1.4.1.2544.1.12.3.1.2.1.1Integer32read-onlycurrent
shelfEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this shelf.
1.3.6.1.4.1.2544.1.12.3.1.2.1.2PhysicalIndexread-onlycurrent
shelfType
OBJECT-TYPE
Shelf Type of the shelf.
1.3.6.1.4.1.2544.1.12.3.1.2.1.3ShelfTyperead-writecurrent
shelfbackplaneRev
OBJECT-TYPE
The backplane revision number.
1.3.6.1.4.1.2544.1.12.3.1.2.1.4DisplayString (SIZE(0..16))read-onlycurrent
shelfbackplaneDOM
OBJECT-TYPE
Backplane Date of Manufacture.
1.3.6.1.4.1.2544.1.12.3.1.2.1.5DateAndTimeread-onlycurrent
shelfbackplaneSerialNo
OBJECT-TYPE
Backplane Serial Number.
1.3.6.1.4.1.2544.1.12.3.1.2.1.6DisplayString (SIZE(0..32))read-onlycurrent
shelfAction
OBJECT-TYPE
Invoke action on the shelf, such as lamp test.
1.3.6.1.4.1.2544.1.12.3.1.2.1.7ShelfActionread-writecurrent
shelfAdminState
OBJECT-TYPE
Administrative State of the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.2.1.8AdminStateread-writecurrent
shelfOperationalState
OBJECT-TYPE
Operational State of the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.2.1.9OperationalStateread-onlycurrent
shelfSecondaryState
OBJECT-TYPE
Secondary State of the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.2.1.10SecondaryStateread-onlycurrent
shelfMfgSite
OBJECT-TYPE
This is the shelf's Manufacturer site.
1.3.6.1.4.1.2544.1.12.3.1.2.1.11DisplayString (SIZE(0..16))read-onlycurrent
shelfOscillatorType
OBJECT-TYPE
The mOscillatorType.
1.3.6.1.4.1.2544.1.12.3.1.2.1.12DisplayString (SIZE(0..16))read-onlycurrent
shelfLedControl
OBJECT-TYPE
Led Control of the shelf.
1.3.6.1.4.1.2544.1.12.3.1.2.1.13LedControlTyperead-writecurrent
slotTable
OBJECT-TYPE
Contains information on slot within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.3not-accessiblecurrent
slotEntry
OBJECT-TYPE
A conceptual row in the slotTable.
1.3.6.1.4.1.2544.1.12.3.1.3.1not-accessiblecurrent
slotIndex
OBJECT-TYPE
The actual physical slot index that uniquely identify a Slot within a shelf. Slot number 255 is used to indicate system level entities.
1.3.6.1.4.1.2544.1.12.3.1.3.1.1Integer32read-onlycurrent
slotEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this slot.
1.3.6.1.4.1.2544.1.12.3.1.3.1.2PhysicalIndexread-onlycurrent
slotType
OBJECT-TYPE
Slot Type of the slot. 'generic' slots can hold NEMI card as well as line cards.
1.3.6.1.4.1.2544.1.12.3.1.3.1.3SlotTyperead-onlycurrent
slotCardType
OBJECT-TYPE
Card Type of the slot.
1.3.6.1.4.1.2544.1.12.3.1.3.1.4CardTyperead-onlycurrent
slotCardUnitName
OBJECT-TYPE
This is the inserted card's unit name.
1.3.6.1.4.1.2544.1.12.3.1.3.1.5DisplayString (SIZE(0..16))read-onlycurrent
slotCardFormatVersion
OBJECT-TYPE
This is the inserted card's format version.
1.3.6.1.4.1.2544.1.12.3.1.3.1.6DisplayString (SIZE(0..8))read-onlycurrent
slotCardCLEICode
OBJECT-TYPE
This is the inserted card's CLEI code.
1.3.6.1.4.1.2544.1.12.3.1.3.1.7DisplayString (SIZE(0..16))read-onlycurrent
slotCardPartNumber
OBJECT-TYPE
This is the inserted card's Part Number.
1.3.6.1.4.1.2544.1.12.3.1.3.1.8DisplayString (SIZE(0..32))read-onlycurrent
slotCardHwRev
OBJECT-TYPE
This is the inserted card's Hardware Revision.
1.3.6.1.4.1.2544.1.12.3.1.3.1.9DisplayString (SIZE(0..16))read-onlycurrent
slotCardSwRev
OBJECT-TYPE
This is the inserted card's Software Revision.
1.3.6.1.4.1.2544.1.12.3.1.3.1.10DisplayString (SIZE(0..16))read-onlycurrent
slotCardSerialNum
OBJECT-TYPE
This is the inserted card's Serial Number.
1.3.6.1.4.1.2544.1.12.3.1.3.1.11DisplayString (SIZE(0..32))read-onlycurrent
slotCardMfgName
OBJECT-TYPE
This is the inserted card's Manufacturer Name.
1.3.6.1.4.1.2544.1.12.3.1.3.1.12DisplayString (SIZE(0..16))read-onlycurrent
slotCardMfgDate
OBJECT-TYPE
This is the inserted card's Manufacturer date.
1.3.6.1.4.1.2544.1.12.3.1.3.1.13DateAndTimeread-onlycurrent
slotCardMfgSite
OBJECT-TYPE
This is the inserted card's Manufacturer site.
1.3.6.1.4.1.2544.1.12.3.1.3.1.14DisplayString (SIZE(0..16))read-onlycurrent
slotSecondaryState
OBJECT-TYPE
Secondary State of the Slot.
1.3.6.1.4.1.2544.1.12.3.1.3.1.15SecondaryStateread-onlycurrent
slotCardPhysicalAddress
OBJECT-TYPE
This is the inserted card's MAC Address, if applicable.
1.3.6.1.4.1.2544.1.12.3.1.3.1.16DisplayString (SIZE(0..32))read-onlycurrent
psuTable
OBJECT-TYPE
Contains information on Power Supply Units within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.4not-accessiblecurrent
psuEntry
OBJECT-TYPE
A conceptual row in the psuTable.
1.3.6.1.4.1.2544.1.12.3.1.4.1not-accessiblecurrent
psuEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this PSU.
1.3.6.1.4.1.2544.1.12.3.1.4.1.1PhysicalIndexread-onlycurrent
psuType
OBJECT-TYPE
PSU Type of the PSU.
1.3.6.1.4.1.2544.1.12.3.1.4.1.2PsuTyperead-onlycurrent
psuAdminState
OBJECT-TYPE
Administrative State of the PSU.
1.3.6.1.4.1.2544.1.12.3.1.4.1.3AdminStateread-writecurrent
psuOperationalState
OBJECT-TYPE
Operational State of the PSU.
1.3.6.1.4.1.2544.1.12.3.1.4.1.4OperationalStateread-onlycurrent
psuSecondaryState
OBJECT-TYPE
Secondary State of the PSU.
1.3.6.1.4.1.2544.1.12.3.1.4.1.5SecondaryStateread-onlycurrent
psuOutputVoltage
OBJECT-TYPE
Output Voltage of the PSU.
1.3.6.1.4.1.2544.1.12.3.1.4.1.6Integer32read-onlycurrent
psuTemperature
OBJECT-TYPE
Temperature of the PSU.
1.3.6.1.4.1.2544.1.12.3.1.4.1.7Integer32read-onlycurrent
psuOutputCurrent
OBJECT-TYPE
Output Current of the PSU.
1.3.6.1.4.1.2544.1.12.3.1.4.1.8Integer32read-onlycurrent
psuStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.4.1.9StorageTyperead-createcurrent
psuRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of psuRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with psuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The psuRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.4.1.10RowStatusread-createcurrent
fanTable
OBJECT-TYPE
Contains information on FANs within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.5not-accessiblecurrent
fanEntry
OBJECT-TYPE
A conceptual row in the fanTable.
1.3.6.1.4.1.2544.1.12.3.1.5.1not-accessiblecurrent
fanEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this FAN.
1.3.6.1.4.1.2544.1.12.3.1.5.1.1PhysicalIndexread-onlycurrent
fanAdminState
OBJECT-TYPE
Administrative State of the FAN.
1.3.6.1.4.1.2544.1.12.3.1.5.1.2AdminStateread-writecurrent
fanOperationalState
OBJECT-TYPE
Operational State of the FAN.
1.3.6.1.4.1.2544.1.12.3.1.5.1.3OperationalStateread-onlycurrent
fanSecondaryState
OBJECT-TYPE
Secondary State of the FAN.
1.3.6.1.4.1.2544.1.12.3.1.5.1.4SecondaryStateread-onlycurrent
fanStorageType
OBJECT-TYPE
Storage Type of the FAN.
1.3.6.1.4.1.2544.1.12.3.1.5.1.5StorageTyperead-createcurrent
fanRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of fanRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with fanRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The fanRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.5.1.6RowStatusread-createcurrent
scuTable
OBJECT-TYPE
Contains information on SCU within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.6not-accessiblecurrent
scuEntry
OBJECT-TYPE
A conceptual row in the scuTable.
1.3.6.1.4.1.2544.1.12.3.1.6.1not-accessiblecurrent
scuEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the SCU card.
1.3.6.1.4.1.2544.1.12.3.1.6.1.1PhysicalIndexread-onlycurrent
scuAdminState
OBJECT-TYPE
Administrative State of the SCU.
1.3.6.1.4.1.2544.1.12.3.1.6.1.2AdminStateread-writecurrent
scuOperationalState
OBJECT-TYPE
Operational State of the SCU.
1.3.6.1.4.1.2544.1.12.3.1.6.1.3OperationalStateread-onlycurrent
scuSecondaryState
OBJECT-TYPE
Secondary State of the SCU.
1.3.6.1.4.1.2544.1.12.3.1.6.1.4SecondaryStateread-onlycurrent
scuVoltage
OBJECT-TYPE
Voltage of the SCU.
1.3.6.1.4.1.2544.1.12.3.1.6.1.5Integer32read-onlycurrent
scuTemperature
OBJECT-TYPE
Temperature of the SCU.
1.3.6.1.4.1.2544.1.12.3.1.6.1.6Integer32read-onlycurrent
scuRestartAction
OBJECT-TYPE
Allows to perform specified action on the SCU card.
1.3.6.1.4.1.2544.1.12.3.1.6.1.7RestartTyperead-writecurrent
scuStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.6.1.8StorageTyperead-createcurrent
scuRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of scuRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with scuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The scuRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.6.1.9RowStatusread-createcurrent
scuFlashModelNum
OBJECT-TYPE
This provides the Compact Flash Model Number on the SCU card.
1.3.6.1.4.1.2544.1.12.3.1.6.1.10DisplayStringread-onlycurrent
scuFlashFirmwareRev
OBJECT-TYPE
This provides the Compact Flash Firmware Revision on the SCU card.
1.3.6.1.4.1.2544.1.12.3.1.6.1.11DisplayStringread-onlycurrent
scuFlashSerialNum
OBJECT-TYPE
This provides the Compact Flash Serial Number on the SCU card.
1.3.6.1.4.1.2544.1.12.3.1.6.1.12DisplayStringread-onlycurrent
nemiTable
OBJECT-TYPE
Contains information on NEMI within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.7not-accessiblecurrent
nemiEntry
OBJECT-TYPE
A conceptual row in the nemiTable.
1.3.6.1.4.1.2544.1.12.3.1.7.1not-accessiblecurrent
nemiEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the NEMI card.
1.3.6.1.4.1.2544.1.12.3.1.7.1.1PhysicalIndexread-onlycurrent
nemiAdminState
OBJECT-TYPE
Administrative State of the NEMI.
1.3.6.1.4.1.2544.1.12.3.1.7.1.2AdminStateread-writecurrent
nemiOperationalState
OBJECT-TYPE
Operational State of the NEMI.
1.3.6.1.4.1.2544.1.12.3.1.7.1.3OperationalStateread-onlycurrent
nemiSecondaryState
OBJECT-TYPE
Secondary State of the NEMI.
1.3.6.1.4.1.2544.1.12.3.1.7.1.4SecondaryStateread-onlycurrent
nemiVoltage
OBJECT-TYPE
Voltage of the NEMI.
1.3.6.1.4.1.2544.1.12.3.1.7.1.5Integer32read-onlycurrent
nemiTemperature
OBJECT-TYPE
Temperature of the NEMI.
1.3.6.1.4.1.2544.1.12.3.1.7.1.6Integer32read-onlycurrent
nemiRestartAction
OBJECT-TYPE
Allows to perform specified action on the NEMI card.
1.3.6.1.4.1.2544.1.12.3.1.7.1.7RestartTyperead-writecurrent
nemiStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.7.1.8StorageTyperead-createcurrent
nemiRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of nemiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with nemiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The nemiRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.7.1.9RowStatusread-createcurrent
nemiForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.7.1.10TruthValueread-writecurrent
nemiFlashModelNum
OBJECT-TYPE
This provides the Flash Model Number on the NEMI card.
1.3.6.1.4.1.2544.1.12.3.1.7.1.11DisplayStringread-onlycurrent
nemiFlashFirmwareRev
OBJECT-TYPE
This provides the Flash Firmware Revision on the NEMI card.
1.3.6.1.4.1.2544.1.12.3.1.7.1.12DisplayStringread-onlycurrent
nemiFlashSerialNum
OBJECT-TYPE
This provides the Flash Serial Number on the NEMI card.
1.3.6.1.4.1.2544.1.12.3.1.7.1.13DisplayStringread-onlycurrent
ethernetNTUCardTable
OBJECT-TYPE
Contains information on Ethernet NTU Cards within the Shelf. These cards support 10M, 100M and 1G Ethernet Interfaces.
1.3.6.1.4.1.2544.1.12.3.1.8not-accessiblecurrent
ethernetNTUCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTUCardTable.
1.3.6.1.4.1.2544.1.12.3.1.8.1not-accessiblecurrent
ethernetNTUCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTU Card.
1.3.6.1.4.1.2544.1.12.3.1.8.1.1PhysicalIndexread-onlycurrent
ethernetNTUCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTU Card.
1.3.6.1.4.1.2544.1.12.3.1.8.1.2AdminStateread-writecurrent
ethernetNTUCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTU Card.
1.3.6.1.4.1.2544.1.12.3.1.8.1.3OperationalStateread-onlycurrent
ethernetNTUCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTU Card.
1.3.6.1.4.1.2544.1.12.3.1.8.1.4SecondaryStateread-onlycurrent
ethernetNTUCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTU Card.
1.3.6.1.4.1.2544.1.12.3.1.8.1.5Integer32read-onlycurrent
ethernetNTUCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTU Card.
1.3.6.1.4.1.2544.1.12.3.1.8.1.6Integer32read-onlycurrent
ethernetNTUCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTU Card.
1.3.6.1.4.1.2544.1.12.3.1.8.1.7TruthValueread-writecurrent
ethernetNTUCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTU card.
1.3.6.1.4.1.2544.1.12.3.1.8.1.8RestartTyperead-writecurrent
ethernetNTUCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.8.1.9StorageTyperead-createcurrent
ethernetNTUCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetNTUCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetNTUCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.8.1.10RowStatusread-createcurrent
ethernetCPMRCardTable
OBJECT-TYPE
Contains information on Ethernet CPMR Cards within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.9not-accessiblecurrent
ethernetCPMRCardEntry
OBJECT-TYPE
A conceptual row in the ethernetCPMRCardTable.
1.3.6.1.4.1.2544.1.12.3.1.9.1not-accessiblecurrent
ethernetCPMRCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet CPMR Card.
1.3.6.1.4.1.2544.1.12.3.1.9.1.1PhysicalIndexread-onlycurrent
ethernetCPMRCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet CPMR Card.
1.3.6.1.4.1.2544.1.12.3.1.9.1.2AdminStateread-writecurrent
ethernetCPMRCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet CPMR Card.
1.3.6.1.4.1.2544.1.12.3.1.9.1.3OperationalStateread-onlycurrent
ethernetCPMRCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet CPMR Card.
1.3.6.1.4.1.2544.1.12.3.1.9.1.4SecondaryStateread-onlycurrent
ethernetCPMRCardVoltage
OBJECT-TYPE
Voltage of the Ethernet CPMR Card.
1.3.6.1.4.1.2544.1.12.3.1.9.1.5Integer32read-onlycurrent
ethernetCPMRCardTemperature
OBJECT-TYPE
Temperature of the Ethernet CPMR Card.
1.3.6.1.4.1.2544.1.12.3.1.9.1.6Integer32read-onlycurrent
ethernetCPMRCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet CPMR card.
1.3.6.1.4.1.2544.1.12.3.1.9.1.7RestartTyperead-writecurrent
ethernetCPMRCardPSU1State
OBJECT-TYPE
Operational State of Power Supply Unit 1 on Ethernet CPMR chassis.
1.3.6.1.4.1.2544.1.12.3.1.9.1.8OperationalStateread-onlycurrent
ethernetCPMRCardPSU2State
OBJECT-TYPE
Operational State of Power Supply Unit 2 on Ethernet CPMR chassis.
1.3.6.1.4.1.2544.1.12.3.1.9.1.9OperationalStateread-onlycurrent
ethernetCPMRCardFAN1State
OBJECT-TYPE
Operational State of FAN 1 on Ethernet CPMR chassis.
1.3.6.1.4.1.2544.1.12.3.1.9.1.10OperationalStateread-onlycurrent
ethernetCPMRCardFAN2State
OBJECT-TYPE
Operational State of FAN 2 on Ethernet CPMR chassis.
1.3.6.1.4.1.2544.1.12.3.1.9.1.11OperationalStateread-onlycurrent
ethernetCPMRCardPsuType
OBJECT-TYPE
PSU Type on Ethernet CPMR chassis.
1.3.6.1.4.1.2544.1.12.3.1.9.1.12PsuTyperead-onlycurrent
ethernetCPMRCardLLFMode
OBJECT-TYPE
Current Link Loss Forwarding Mode on CPMR.
1.3.6.1.4.1.2544.1.12.3.1.9.1.13CmCPMRLinkLossFwdModeread-onlycurrent
ethernetCPMRCardLLFModeAction
OBJECT-TYPE
Operation to set the appropriate mode on CPMR.
1.3.6.1.4.1.2544.1.12.3.1.9.1.14CmCPMRLinkLossFwdModeread-writecurrent
ethernetNTEGE101CardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE101 Cards. These are supported on the FSP150CC GE101 product.
1.3.6.1.4.1.2544.1.12.3.1.10not-accessiblecurrent
ethernetNTEGE101CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE101CardTable.
1.3.6.1.4.1.2544.1.12.3.1.10.1not-accessiblecurrent
ethernetNTEGE101CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Card.
1.3.6.1.4.1.2544.1.12.3.1.10.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE101CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE101 Card.
1.3.6.1.4.1.2544.1.12.3.1.10.1.2AdminStateread-writecurrent
ethernetNTEGE101CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE101 Card.
1.3.6.1.4.1.2544.1.12.3.1.10.1.3OperationalStateread-onlycurrent
ethernetNTEGE101CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE101 Card.
1.3.6.1.4.1.2544.1.12.3.1.10.1.4SecondaryStateread-onlycurrent
ethernetNTEGE101CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE101 Card.
1.3.6.1.4.1.2544.1.12.3.1.10.1.5Integer32read-onlycurrent
ethernetNTEGE101CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE101 Card.
1.3.6.1.4.1.2544.1.12.3.1.10.1.6Integer32read-onlycurrent
ethernetNTEGE101CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE101 Card.
1.3.6.1.4.1.2544.1.12.3.1.10.1.7TruthValueread-writecurrent
ethernetNTEGE101CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE101 card.
1.3.6.1.4.1.2544.1.12.3.1.10.1.8RestartTyperead-writecurrent
ethernetNTEGE206CardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE206 Cards. These are supported on the FSP150CC GE206 product.
1.3.6.1.4.1.2544.1.12.3.1.11not-accessiblecurrent
ethernetNTEGE206CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE206CardTable.
1.3.6.1.4.1.2544.1.12.3.1.11.1not-accessiblecurrent
ethernetNTEGE206CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.11.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE206CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.11.1.2AdminStateread-writecurrent
ethernetNTEGE206CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.11.1.3OperationalStateread-onlycurrent
ethernetNTEGE206CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.11.1.4SecondaryStateread-onlycurrent
ethernetNTEGE206CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.11.1.5Integer32read-onlycurrent
ethernetNTEGE206CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.11.1.6Integer32read-onlycurrent
ethernetNTEGE206CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.11.1.7TruthValueread-writecurrent
ethernetNTEGE206CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE206 card.
1.3.6.1.4.1.2544.1.12.3.1.11.1.8RestartTyperead-writecurrent
ethernetNTEGE206CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.11.1.9CmPmIntervalTyperead-writecurrent
pseudoWireE3CardTable
OBJECT-TYPE
Contains information on Pseudo Wire E3 (Emulation Edge to Edge) Cards. These are supported on the FSP150CC GE206 product.
1.3.6.1.4.1.2544.1.12.3.1.12not-accessibleobsolete
pseudoWireE3CardEntry
OBJECT-TYPE
A conceptual row in the pseudoWireE3CardTable.
1.3.6.1.4.1.2544.1.12.3.1.12.1not-accessibleobsolete
pseudoWireE3CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.1PhysicalIndexread-onlyobsolete
pseudoWireE3CardAdminState
OBJECT-TYPE
Administrative State of the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.2AdminStateread-writeobsolete
pseudoWireE3CardOperationalState
OBJECT-TYPE
Operational State of the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.3OperationalStateread-onlyobsolete
pseudoWireE3CardSecondaryState
OBJECT-TYPE
Secondary State of the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.4SecondaryStateread-onlyobsolete
pseudoWireE3CardIpAddress
OBJECT-TYPE
External management IP Address of the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.5IpAddressread-writeobsolete
pseudoWireE3CardIpNetmask
OBJECT-TYPE
External management IP Net mask of the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.6IpAddressread-writeobsolete
pseudoWireE3CardIpGateway
OBJECT-TYPE
External management IP Gateway of the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.7IpAddressread-writeobsolete
pseudoWireE3CardDhcpEnabled
OBJECT-TYPE
External management - whether DHCP is enabled.
1.3.6.1.4.1.2544.1.12.3.1.12.1.8TruthValueread-writeobsolete
pseudoWireE3CardMgmtVlanId
OBJECT-TYPE
External management VLAN Id for the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.9VlanIdread-writeobsolete
pseudoWireE3CardTimeOfDay
OBJECT-TYPE
Time of day for the Pseudo Wire E3 Card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.10DateAndTimeread-writeobsolete
pseudoWireE3CardRestartAction
OBJECT-TYPE
Allows to perform restart action on the Pseudo Wire E3 card.
1.3.6.1.4.1.2544.1.12.3.1.12.1.11RestartTyperead-writeobsolete
scuTTable
OBJECT-TYPE
Contains information on SCU-T within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.13not-accessiblecurrent
scuTEntry
OBJECT-TYPE
A conceptual row in the scuTTable.
1.3.6.1.4.1.2544.1.12.3.1.13.1not-accessiblecurrent
scuTEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the SCU-T card.
1.3.6.1.4.1.2544.1.12.3.1.13.1.1PhysicalIndexread-onlycurrent
scuTAdminState
OBJECT-TYPE
Administrative State of the SCU-T.
1.3.6.1.4.1.2544.1.12.3.1.13.1.2AdminStateread-writecurrent
scuTOperationalState
OBJECT-TYPE
Operational State of the SCU-T.
1.3.6.1.4.1.2544.1.12.3.1.13.1.3OperationalStateread-onlycurrent
scuTSecondaryState
OBJECT-TYPE
Secondary State of the SCU-T.
1.3.6.1.4.1.2544.1.12.3.1.13.1.4SecondaryStateread-onlycurrent
scuTVoltage
OBJECT-TYPE
Voltage of the SCU-T.
1.3.6.1.4.1.2544.1.12.3.1.13.1.5Integer32read-onlycurrent
scuTTemperature
OBJECT-TYPE
Temperature of the SCU-T.
1.3.6.1.4.1.2544.1.12.3.1.13.1.6Integer32read-onlycurrent
scuTRestartAction
OBJECT-TYPE
Allows to perform specified action on the SCU-T card.
1.3.6.1.4.1.2544.1.12.3.1.13.1.7RestartTyperead-writecurrent
scuTStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.13.1.8StorageTyperead-createcurrent
scuTRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of scuTRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The scuTRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.13.1.9RowStatusread-createcurrent
ethernetNTECardTable
OBJECT-TYPE
Contains information on Ethernet NTE Cards within the Shelf. These cards support 10M, 100M and 1G Ethernet Interfaces.
1.3.6.1.4.1.2544.1.12.3.1.14not-accessiblecurrent
ethernetNTECardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTECardTable.
1.3.6.1.4.1.2544.1.12.3.1.14.1not-accessiblecurrent
ethernetNTECardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE Card.
1.3.6.1.4.1.2544.1.12.3.1.14.1.1PhysicalIndexread-onlycurrent
ethernetNTECardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE Card.
1.3.6.1.4.1.2544.1.12.3.1.14.1.2AdminStateread-writecurrent
ethernetNTECardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE Card.
1.3.6.1.4.1.2544.1.12.3.1.14.1.3OperationalStateread-onlycurrent
ethernetNTECardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE Card.
1.3.6.1.4.1.2544.1.12.3.1.14.1.4SecondaryStateread-onlycurrent
ethernetNTECardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE Card.
1.3.6.1.4.1.2544.1.12.3.1.14.1.5Integer32read-onlycurrent
ethernetNTECardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE Card.
1.3.6.1.4.1.2544.1.12.3.1.14.1.6Integer32read-onlycurrent
ethernetNTECardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE Card.
1.3.6.1.4.1.2544.1.12.3.1.14.1.7TruthValueread-writecurrent
ethernetNTECardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE card.
1.3.6.1.4.1.2544.1.12.3.1.14.1.8RestartTyperead-writecurrent
ethernetNTECardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.14.1.9StorageTyperead-createcurrent
ethernetNTECardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetNTECardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTECardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetNTECardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.14.1.10RowStatusread-createcurrent
ethernetNTEGE201CardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE201 Cards. These are supported on the FSP150CC GE201 product.
1.3.6.1.4.1.2544.1.12.3.1.15not-accessiblecurrent
ethernetNTEGE201CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE201CardTable.
1.3.6.1.4.1.2544.1.12.3.1.15.1not-accessiblecurrent
ethernetNTEGE201CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE201 Card.
1.3.6.1.4.1.2544.1.12.3.1.15.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE201CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE201 Card.
1.3.6.1.4.1.2544.1.12.3.1.15.1.2AdminStateread-writecurrent
ethernetNTEGE201CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE201 Card.
1.3.6.1.4.1.2544.1.12.3.1.15.1.3OperationalStateread-onlycurrent
ethernetNTEGE201CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE201 Card.
1.3.6.1.4.1.2544.1.12.3.1.15.1.4SecondaryStateread-onlycurrent
ethernetNTEGE201CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE201 Card.
1.3.6.1.4.1.2544.1.12.3.1.15.1.5Integer32read-onlycurrent
ethernetNTEGE201CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE201 Card.
1.3.6.1.4.1.2544.1.12.3.1.15.1.6Integer32read-onlycurrent
ethernetNTEGE201CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201 Card.
1.3.6.1.4.1.2544.1.12.3.1.15.1.7TruthValueread-writecurrent
ethernetNTEGE201CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE201 card.
1.3.6.1.4.1.2544.1.12.3.1.15.1.8RestartTyperead-writecurrent
ethernetNTEGE201CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.15.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE201SyncECardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE201SyncE Cards. These are supported on the FSP150CC GE201SyncE product.
1.3.6.1.4.1.2544.1.12.3.1.16not-accessiblecurrent
ethernetNTEGE201SyncECardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE201SyncECardTable.
1.3.6.1.4.1.2544.1.12.3.1.16.1not-accessiblecurrent
ethernetNTEGE201SyncECardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE201SyncE Card.
1.3.6.1.4.1.2544.1.12.3.1.16.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE201SyncECardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE201SyncE Card.
1.3.6.1.4.1.2544.1.12.3.1.16.1.2AdminStateread-writecurrent
ethernetNTEGE201SyncECardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE201SyncE Card.
1.3.6.1.4.1.2544.1.12.3.1.16.1.3OperationalStateread-onlycurrent
ethernetNTEGE201SyncECardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE201SyncE Card.
1.3.6.1.4.1.2544.1.12.3.1.16.1.4SecondaryStateread-onlycurrent
ethernetNTEGE201SyncECardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE201SyncE Card.
1.3.6.1.4.1.2544.1.12.3.1.16.1.5Integer32read-onlycurrent
ethernetNTEGE201SyncECardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE201SyncE Card.
1.3.6.1.4.1.2544.1.12.3.1.16.1.6Integer32read-onlycurrent
ethernetNTEGE201SyncECardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201SyncE Card.
1.3.6.1.4.1.2544.1.12.3.1.16.1.7TruthValueread-writecurrent
ethernetNTEGE201SyncECardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE201SyncE card.
1.3.6.1.4.1.2544.1.12.3.1.16.1.8RestartTyperead-writecurrent
ethernetNTEGE201SyncECardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.16.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE206FCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE206F Cards. These are supported on the FSP150CC GE206 product.
1.3.6.1.4.1.2544.1.12.3.1.17not-accessiblecurrent
ethernetNTEGE206FCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE206FCardTable.
1.3.6.1.4.1.2544.1.12.3.1.17.1not-accessiblecurrent
ethernetNTEGE206FCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.17.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE206FCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.17.1.2AdminStateread-writecurrent
ethernetNTEGE206FCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.17.1.3OperationalStateread-onlycurrent
ethernetNTEGE206FCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.17.1.4SecondaryStateread-onlycurrent
ethernetNTEGE206FCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.17.1.5Integer32read-onlycurrent
ethernetNTEGE206FCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.17.1.6Integer32read-onlycurrent
ethernetNTEGE206FCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card.
1.3.6.1.4.1.2544.1.12.3.1.17.1.7TruthValueread-writecurrent
ethernetNTEGE206FCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE206 card.
1.3.6.1.4.1.2544.1.12.3.1.17.1.8RestartTyperead-writecurrent
ethernetNTEGE206FCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.17.1.9CmPmIntervalTyperead-writecurrent
ethernet1x10GCardTable
OBJECT-TYPE
Contains information on Ethernet 1x10G Cards.
1.3.6.1.4.1.2544.1.12.3.1.18not-accessiblecurrent
ethernet1x10GCardEntry
OBJECT-TYPE
A conceptual row in the ethernet1x10GCardTable.
1.3.6.1.4.1.2544.1.12.3.1.18.1not-accessiblecurrent
ethernet1x10GCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet 1x10G Card.
1.3.6.1.4.1.2544.1.12.3.1.18.1.1PhysicalIndexread-onlycurrent
ethernet1x10GCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet 1x10G Card.
1.3.6.1.4.1.2544.1.12.3.1.18.1.2AdminStateread-writecurrent
ethernet1x10GCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet 1x10G Card.
1.3.6.1.4.1.2544.1.12.3.1.18.1.3OperationalStateread-onlycurrent
ethernet1x10GCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet 1x10G Card.
1.3.6.1.4.1.2544.1.12.3.1.18.1.4SecondaryStateread-onlycurrent
ethernet1x10GCardTemperature
OBJECT-TYPE
Temperature of the Ethernet 1x10G Card.
1.3.6.1.4.1.2544.1.12.3.1.18.1.5Integer32read-onlycurrent
ethernet1x10GCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G Card.
1.3.6.1.4.1.2544.1.12.3.1.18.1.6TruthValueread-writecurrent
ethernet1x10GCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet 1x10G card.
1.3.6.1.4.1.2544.1.12.3.1.18.1.7RestartTyperead-writecurrent
ethernet1x10GCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.18.1.8StorageTyperead-createcurrent
ethernet1x10GCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet1x10GCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet1x10GCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.18.1.9RowStatusread-createcurrent
ethernet1x10GCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.18.1.10TruthValueread-writecurrent
ethernet10x1GCardTable
OBJECT-TYPE
Contains information on Ethernet 10x1G Cards.
1.3.6.1.4.1.2544.1.12.3.1.19not-accessiblecurrent
ethernet10x1GCardEntry
OBJECT-TYPE
A conceptual row in the ethernet10x1GCardTable.
1.3.6.1.4.1.2544.1.12.3.1.19.1not-accessiblecurrent
ethernet10x1GCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet 10x1G Card.
1.3.6.1.4.1.2544.1.12.3.1.19.1.1PhysicalIndexread-onlycurrent
ethernet10x1GCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet 10x1G Card.
1.3.6.1.4.1.2544.1.12.3.1.19.1.2AdminStateread-writecurrent
ethernet10x1GCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet 10x1G Card.
1.3.6.1.4.1.2544.1.12.3.1.19.1.3OperationalStateread-onlycurrent
ethernet10x1GCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet 10x1G Card.
1.3.6.1.4.1.2544.1.12.3.1.19.1.4SecondaryStateread-onlycurrent
ethernet10x1GCardTemperature
OBJECT-TYPE
Temperature of the Ethernet 10x1G Card.
1.3.6.1.4.1.2544.1.12.3.1.19.1.5Integer32read-onlycurrent
ethernet10x1GCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet 10x1G Card.
1.3.6.1.4.1.2544.1.12.3.1.19.1.6TruthValueread-writecurrent
ethernet10x1GCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet 10x1G card.
1.3.6.1.4.1.2544.1.12.3.1.19.1.7RestartTyperead-writecurrent
ethernet10x1GCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.19.1.8StorageTyperead-createcurrent
ethernet10x1GCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet10x1GCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet10x1GCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.19.1.9RowStatusread-createcurrent
ethernet10x1GCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.19.1.10TruthValueread-writecurrent
ethernetSWFCardTable
OBJECT-TYPE
Contains information on Ethernet SWF Cards.
1.3.6.1.4.1.2544.1.12.3.1.20not-accessiblecurrent
ethernetSWFCardEntry
OBJECT-TYPE
A conceptual row in the ethernetSWFCardTable.
1.3.6.1.4.1.2544.1.12.3.1.20.1not-accessiblecurrent
ethernetSWFCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet SWF Card.
1.3.6.1.4.1.2544.1.12.3.1.20.1.1PhysicalIndexread-onlycurrent
ethernetSWFCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet SWF Card.
1.3.6.1.4.1.2544.1.12.3.1.20.1.2AdminStateread-writecurrent
ethernetSWFCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet SWF Card.
1.3.6.1.4.1.2544.1.12.3.1.20.1.3OperationalStateread-onlycurrent
ethernetSWFCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet SWF Card.
1.3.6.1.4.1.2544.1.12.3.1.20.1.4SecondaryStateread-onlycurrent
ethernetSWFCardTemperature
OBJECT-TYPE
Temperature of the Ethernet SWF Card.
1.3.6.1.4.1.2544.1.12.3.1.20.1.5Integer32read-onlycurrent
ethernetSWFCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet SWF card.
1.3.6.1.4.1.2544.1.12.3.1.20.1.6RestartTyperead-writecurrent
ethernetSWFCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.20.1.7StorageTyperead-createcurrent
ethernetSWFCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetSWFCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetSWFCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.20.1.8RowStatusread-createcurrent
ethernetSWFCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.20.1.9TruthValueread-writecurrent
stuCardTable
OBJECT-TYPE
Contains information on STU Cards.
1.3.6.1.4.1.2544.1.12.3.1.21not-accessiblecurrent
stuCardEntry
OBJECT-TYPE
A conceptual row in the stuCardTable.
1.3.6.1.4.1.2544.1.12.3.1.21.1not-accessiblecurrent
stuCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the STU Card.
1.3.6.1.4.1.2544.1.12.3.1.21.1.1PhysicalIndexread-onlycurrent
stuCardAdminState
OBJECT-TYPE
Administrative State of the Stu Card.
1.3.6.1.4.1.2544.1.12.3.1.21.1.2AdminStateread-writecurrent
stuCardOperationalState
OBJECT-TYPE
Operational State of the Stu Card.
1.3.6.1.4.1.2544.1.12.3.1.21.1.3OperationalStateread-onlycurrent
stuCardSecondaryState
OBJECT-TYPE
Secondary State of the Stu Card.
1.3.6.1.4.1.2544.1.12.3.1.21.1.4SecondaryStateread-onlycurrent
stuCardTemperature
OBJECT-TYPE
Temperature of the Stu Card.
1.3.6.1.4.1.2544.1.12.3.1.21.1.5Integer32read-onlycurrent
stuCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Stu card.
1.3.6.1.4.1.2544.1.12.3.1.21.1.6RestartTyperead-writecurrent
stuCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.21.1.7StorageTyperead-createcurrent
stuCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stuCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stuCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.21.1.8RowStatusread-createcurrent
stuCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.21.1.9TruthValueread-writecurrent
amiTable
OBJECT-TYPE
Contains information on AMI within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.22not-accessiblecurrent
amiEntry
OBJECT-TYPE
A conceptual row in the amiTable.
1.3.6.1.4.1.2544.1.12.3.1.22.1not-accessiblecurrent
amiEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the AMI card.
1.3.6.1.4.1.2544.1.12.3.1.22.1.1PhysicalIndexread-onlycurrent
amiAdminState
OBJECT-TYPE
Administrative State of the AMI.
1.3.6.1.4.1.2544.1.12.3.1.22.1.2AdminStateread-writecurrent
amiOperationalState
OBJECT-TYPE
Operational State of the AMI.
1.3.6.1.4.1.2544.1.12.3.1.22.1.3OperationalStateread-onlycurrent
amiSecondaryState
OBJECT-TYPE
Secondary State of the AMI.
1.3.6.1.4.1.2544.1.12.3.1.22.1.4SecondaryStateread-onlycurrent
amiTemperature
OBJECT-TYPE
Temperature of the AMI.
1.3.6.1.4.1.2544.1.12.3.1.22.1.5Integer32read-onlycurrent
amiRestartAction
OBJECT-TYPE
Allows to perform specified action on the AMI card.
1.3.6.1.4.1.2544.1.12.3.1.22.1.6RestartTyperead-writecurrent
stiTable
OBJECT-TYPE
Contains information on STI within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.23not-accessiblecurrent
stiEntry
OBJECT-TYPE
A conceptual row in the stiTable.
1.3.6.1.4.1.2544.1.12.3.1.23.1not-accessiblecurrent
stiEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the STI card.
1.3.6.1.4.1.2544.1.12.3.1.23.1.1PhysicalIndexread-onlycurrent
stiAdminState
OBJECT-TYPE
Administrative State of the STI.
1.3.6.1.4.1.2544.1.12.3.1.23.1.2AdminStateread-writecurrent
stiOperationalState
OBJECT-TYPE
Operational State of the STI.
1.3.6.1.4.1.2544.1.12.3.1.23.1.3OperationalStateread-onlycurrent
stiSecondaryState
OBJECT-TYPE
Secondary State of the STI.
1.3.6.1.4.1.2544.1.12.3.1.23.1.4SecondaryStateread-onlycurrent
stiTemperature
OBJECT-TYPE
Temperature of the STI.
1.3.6.1.4.1.2544.1.12.3.1.23.1.5Integer32read-onlycurrent
stiStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.23.1.6StorageTyperead-createcurrent
stiRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stiRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.23.1.7RowStatusread-createcurrent
f3UsbHostTable
OBJECT-TYPE
Contains information on Usb Host.
1.3.6.1.4.1.2544.1.12.3.1.24not-accessiblecurrent
f3UsbHostEntry
OBJECT-TYPE
A conceptual row in the f3UsbHostTable.
1.3.6.1.4.1.2544.1.12.3.1.24.1not-accessiblecurrent
f3UsbHostIndex
OBJECT-TYPE
The actual physical usb host index that uniquely identify a usb host.
1.3.6.1.4.1.2544.1.12.3.1.24.1.1PhysicalIndexread-onlycurrent
f3UsbHostEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the usb host.
1.3.6.1.4.1.2544.1.12.3.1.24.1.2PhysicalIndexread-onlycurrent
f3UsbHostUnitName
OBJECT-TYPE
This is the inserted usb device's unit name.
1.3.6.1.4.1.2544.1.12.3.1.24.1.3DisplayStringread-onlycurrent
f3UsbHostFormatVersion
OBJECT-TYPE
This is the inserted usb device's format version.
1.3.6.1.4.1.2544.1.12.3.1.24.1.4DisplayStringread-onlycurrent
f3UsbHostCLEICode
OBJECT-TYPE
This is the inserted usb device's CLEI code.
1.3.6.1.4.1.2544.1.12.3.1.24.1.5DisplayStringread-onlycurrent
f3UsbHostPartNumber
OBJECT-TYPE
This is the inserted usb device's Part Number.
1.3.6.1.4.1.2544.1.12.3.1.24.1.6DisplayStringread-onlycurrent
f3UsbHostHwRev
OBJECT-TYPE
This is the inserted usb device's Hardware Revision.
1.3.6.1.4.1.2544.1.12.3.1.24.1.7DisplayStringread-onlycurrent
f3UsbHostSwRev
OBJECT-TYPE
This is the inserted usb device's Software Revision.
1.3.6.1.4.1.2544.1.12.3.1.24.1.8DisplayStringread-onlycurrent
f3UsbHostSerialNum
OBJECT-TYPE
This is the inserted usb device's Serial Number.
1.3.6.1.4.1.2544.1.12.3.1.24.1.9DisplayStringread-onlycurrent
f3UsbHostMfgName
OBJECT-TYPE
This is the inserted usb device's Manufacturer Name.
1.3.6.1.4.1.2544.1.12.3.1.24.1.10DisplayStringread-onlycurrent
f3UsbHostMfgDate
OBJECT-TYPE
This is the inserted usb device's Manufacturer date.
1.3.6.1.4.1.2544.1.12.3.1.24.1.11DateAndTimeread-onlycurrent
f3UsbHostMfgSite
OBJECT-TYPE
This is the inserted usb device's Manufacturer site.
1.3.6.1.4.1.2544.1.12.3.1.24.1.12DisplayStringread-onlycurrent
f3UsbHostSecondaryState
OBJECT-TYPE
Secondary State of the usb device.
1.3.6.1.4.1.2544.1.12.3.1.24.1.13SecondaryStateread-onlycurrent
f3UsbHostPhysicalAddress
OBJECT-TYPE
This is the inserted usb device's MAC Address, if applicable.
1.3.6.1.4.1.2544.1.12.3.1.24.1.14DisplayStringread-onlycurrent
f3UsbHostMuxOperationalMode
OBJECT-TYPE
This object describe the USB operatioan mode.
1.3.6.1.4.1.2544.1.12.3.1.24.1.15UsbOperationalModeread-writecurrent
ethernetNTEGE112CardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Cards. These are supported on the FSP150CC GE112 product.
1.3.6.1.4.1.2544.1.12.3.1.25not-accessiblecurrent
ethernetNTEGE112CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE112CardTable.
1.3.6.1.4.1.2544.1.12.3.1.25.1not-accessiblecurrent
ethernetNTEGE112CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE112CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.2AdminStateread-writecurrent
ethernetNTEGE112CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.3OperationalStateread-onlycurrent
ethernetNTEGE112CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.4SecondaryStateread-onlycurrent
ethernetNTEGE112CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.5Integer32read-onlycurrent
ethernetNTEGE112CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.6Integer32read-onlycurrent
ethernetNTEGE112CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.7TruthValueread-writecurrent
ethernetNTEGE112CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112 card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.8RestartTyperead-writecurrent
ethernetNTEGE112CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.25.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE112CardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE112 card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.10VariablePointerread-createcurrent
ethernetNTEGE112CardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112 card.
1.3.6.1.4.1.2544.1.12.3.1.25.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114CardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114 Cards. These are supported on the FSP150CC GE114 product.
1.3.6.1.4.1.2544.1.12.3.1.26not-accessiblecurrent
ethernetNTEGE114CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114CardTable.
1.3.6.1.4.1.2544.1.12.3.1.26.1not-accessiblecurrent
ethernetNTEGE114CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114 Card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.2AdminStateread-writecurrent
ethernetNTEGE114CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114 Card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.3OperationalStateread-onlycurrent
ethernetNTEGE114CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114 Card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.5Integer32read-onlycurrent
ethernetNTEGE114CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114 Card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.6Integer32read-onlycurrent
ethernetNTEGE114CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114 Card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.7TruthValueread-writecurrent
ethernetNTEGE114CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114 card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.8RestartTyperead-writecurrent
ethernetNTEGE114CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.26.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114CardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114 card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.10VariablePointerread-createcurrent
ethernetNTEGE114CardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114 card.
1.3.6.1.4.1.2544.1.12.3.1.26.1.11SwitchPortActionread-writecurrent
ethernetNTEGE206VCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE206V Cards. These are supported on the FSP150CC GE206V product.
1.3.6.1.4.1.2544.1.12.3.1.27not-accessiblecurrent
ethernetNTEGE206VCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE206VCardTable.
1.3.6.1.4.1.2544.1.12.3.1.27.1not-accessiblecurrent
ethernetNTEGE206VCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE206V Card.
1.3.6.1.4.1.2544.1.12.3.1.27.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE206VCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE206V Card.
1.3.6.1.4.1.2544.1.12.3.1.27.1.2AdminStateread-writecurrent
ethernetNTEGE206VCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE206V Card.
1.3.6.1.4.1.2544.1.12.3.1.27.1.3OperationalStateread-onlycurrent
ethernetNTEGE206VCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE206V Card.
1.3.6.1.4.1.2544.1.12.3.1.27.1.4SecondaryStateread-onlycurrent
ethernetNTEGE206VCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE206V Card.
1.3.6.1.4.1.2544.1.12.3.1.27.1.5Integer32read-onlycurrent
ethernetNTEGE206VCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE206V Card.
1.3.6.1.4.1.2544.1.12.3.1.27.1.6Integer32read-onlycurrent
ethernetNTEGE206VCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206V Card.
1.3.6.1.4.1.2544.1.12.3.1.27.1.7TruthValueread-writecurrent
ethernetNTEGE206VCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE206V card.
1.3.6.1.4.1.2544.1.12.3.1.27.1.8RestartTyperead-writecurrent
ethernetNTEGE206VCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.27.1.9CmPmIntervalTyperead-writecurrent
ethernetGE4SCCCardTable
OBJECT-TYPE
Contains information on Ethernet GE206V Optical Port Expander Cards. These are supported on the FSP150CC GE206V product.
1.3.6.1.4.1.2544.1.12.3.1.28not-accessiblecurrent
ethernetGE4SCCCardEntry
OBJECT-TYPE
A conceptual row in the ethernetGE4SCCCardTable.
1.3.6.1.4.1.2544.1.12.3.1.28.1not-accessiblecurrent
ethernetGE4SCCCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.28.1.1PhysicalIndexread-onlycurrent
ethernetGE4SCCCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.28.1.2AdminStateread-writecurrent
ethernetGE4SCCCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.28.1.3OperationalStateread-onlycurrent
ethernetGE4SCCCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.28.1.4SecondaryStateread-onlycurrent
ethernetGE4SCCCardVoltage
OBJECT-TYPE
Voltage of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.28.1.5Integer32read-onlycurrent
ethernetGE4SCCCardTemperature
OBJECT-TYPE
Temperature of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.28.1.6Integer32read-onlycurrent
ethernetGE4SCCCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet GE-4S Connector card.
1.3.6.1.4.1.2544.1.12.3.1.28.1.7RestartTyperead-writecurrent
ethernetGE4SCCCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.28.1.8StorageTyperead-createcurrent
ethernetGE4SCCCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE4SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE4SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE4SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.28.1.9RowStatusread-createcurrent
ethernetGE4ECCCardTable
OBJECT-TYPE
Contains information on Ethernet GE206V Optical Port Expander Cards. These are supported on the FSP150CC GE206V product.
1.3.6.1.4.1.2544.1.12.3.1.29not-accessiblecurrent
ethernetGE4ECCCardEntry
OBJECT-TYPE
A conceptual row in the ethernetGE4ECCCardTable.
1.3.6.1.4.1.2544.1.12.3.1.29.1not-accessiblecurrent
ethernetGE4ECCCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.29.1.1PhysicalIndexread-onlycurrent
ethernetGE4ECCCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.29.1.2AdminStateread-writecurrent
ethernetGE4ECCCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.29.1.3OperationalStateread-onlycurrent
ethernetGE4ECCCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.29.1.4SecondaryStateread-onlycurrent
ethernetGE4ECCCardVoltage
OBJECT-TYPE
Voltage of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.29.1.5Integer32read-onlycurrent
ethernetGE4ECCCardTemperature
OBJECT-TYPE
Temperature of the Ethernet GE-4S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.29.1.6Integer32read-onlycurrent
ethernetGE4ECCCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet GE-4S Connector card.
1.3.6.1.4.1.2544.1.12.3.1.29.1.7RestartTyperead-writecurrent
ethernetGE4ECCCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.29.1.8StorageTyperead-createcurrent
ethernetGE4ECCCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE4ECCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE4ECCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE4ECCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.29.1.9RowStatusread-createcurrent
ethernetNTEXG210CardTable
OBJECT-TYPE
Contains information on Ethernet NTE XG210 Cards. These are supported on the FSP150CC XG210 product.
1.3.6.1.4.1.2544.1.12.3.1.30not-accessiblecurrent
ethernetNTEXG210CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEXG210CardTable.
1.3.6.1.4.1.2544.1.12.3.1.30.1not-accessiblecurrent
ethernetNTEXG210CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE XG210 Card.
1.3.6.1.4.1.2544.1.12.3.1.30.1.1PhysicalIndexread-onlycurrent
ethernetNTEXG210CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE XG210 Card.
1.3.6.1.4.1.2544.1.12.3.1.30.1.2AdminStateread-writecurrent
ethernetNTEXG210CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE XG210 Card.
1.3.6.1.4.1.2544.1.12.3.1.30.1.3OperationalStateread-onlycurrent
ethernetNTEXG210CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE XG210 Card.
1.3.6.1.4.1.2544.1.12.3.1.30.1.4SecondaryStateread-onlycurrent
ethernetNTEXG210CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE XG210 Card.
1.3.6.1.4.1.2544.1.12.3.1.30.1.5Integer32read-onlycurrent
ethernetNTEXG210CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE XG210 Card.
1.3.6.1.4.1.2544.1.12.3.1.30.1.6Integer32read-onlycurrent
ethernetNTEXG210CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG210 Card.
1.3.6.1.4.1.2544.1.12.3.1.30.1.7TruthValueread-writecurrent
ethernetNTEXG210CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE XG210 card.
1.3.6.1.4.1.2544.1.12.3.1.30.1.8RestartTyperead-writecurrent
ethernetNTEXG210CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.30.1.9CmPmIntervalTyperead-writecurrent
ethernetXG1XCCCardTable
OBJECT-TYPE
Contains information on Ethernet XG210/SH1PCS XFP Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products.
1.3.6.1.4.1.2544.1.12.3.1.31not-accessiblecurrent
ethernetXG1XCCCardEntry
OBJECT-TYPE
A conceptual row in the ethernetXG1XCCCardTable.
1.3.6.1.4.1.2544.1.12.3.1.31.1not-accessiblecurrent
ethernetXG1XCCCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet XG-1-XFP Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.31.1.1PhysicalIndexread-onlycurrent
ethernetXG1XCCCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet XG-1-XFP Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.31.1.2AdminStateread-writecurrent
ethernetXG1XCCCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet XG-1-XFP Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.31.1.3OperationalStateread-onlycurrent
ethernetXG1XCCCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet XG-1-XFP Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.31.1.4SecondaryStateread-onlycurrent
ethernetXG1XCCCardVoltage
OBJECT-TYPE
Voltage of the Ethernet XG-1-XFP Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.31.1.5Integer32read-onlycurrent
ethernetXG1XCCCardTemperature
OBJECT-TYPE
Temperature of the Ethernet XG-1-XFP Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.31.1.6Integer32read-onlycurrent
ethernetXG1XCCCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet XG-1-XFP Connector card.
1.3.6.1.4.1.2544.1.12.3.1.31.1.7RestartTyperead-writecurrent
ethernetXG1XCCCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.31.1.8StorageTyperead-createcurrent
ethernetXG1XCCCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetXG1XCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetXG1XCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetXG1XCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.31.1.9RowStatusread-createcurrent
ethernetXG1SCCCardTable
OBJECT-TYPE
Contains information on Ethernet XG210/SH1PCS SFP+ Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products.
1.3.6.1.4.1.2544.1.12.3.1.32not-accessiblecurrent
ethernetXG1SCCCardEntry
OBJECT-TYPE
A conceptual row in the ethernetXG1SCCCardTable.
1.3.6.1.4.1.2544.1.12.3.1.32.1not-accessiblecurrent
ethernetXG1SCCCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet XG-1-SFP+ Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.32.1.1PhysicalIndexread-onlycurrent
ethernetXG1SCCCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet XG-1-SFP+ Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.32.1.2AdminStateread-writecurrent
ethernetXG1SCCCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet XG-1-SFP+ Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.32.1.3OperationalStateread-onlycurrent
ethernetXG1SCCCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet XG-1-SFP+ Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.32.1.4SecondaryStateread-onlycurrent
ethernetXG1SCCCardVoltage
OBJECT-TYPE
Voltage of the Ethernet XG-1-SFP+ Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.32.1.5Integer32read-onlycurrent
ethernetXG1SCCCardTemperature
OBJECT-TYPE
Temperature of the Ethernet XG-1-SFP+ Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.32.1.6Integer32read-onlycurrent
ethernetXG1SCCCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet XG-1-SFP+ Connector card.
1.3.6.1.4.1.2544.1.12.3.1.32.1.7RestartTyperead-writecurrent
ethernetXG1SCCCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.32.1.8StorageTyperead-createcurrent
ethernetXG1SCCCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetXG1SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetXG1SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetXG1SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.32.1.9RowStatusread-createcurrent
ethernetOverOCSTMCardTable
OBJECT-TYPE
Contains information on STM1-4-ET Cards.
1.3.6.1.4.1.2544.1.12.3.1.33not-accessiblecurrent
ethernetOverOCSTMCardEntry
OBJECT-TYPE
A conceptual row in the ethernetOverOCSTMCardTable.
1.3.6.1.4.1.2544.1.12.3.1.33.1not-accessiblecurrent
ethernetOverOCSTMCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the STM1-4-ET Card.
1.3.6.1.4.1.2544.1.12.3.1.33.1.1PhysicalIndexread-onlycurrent
ethernetOverOCSTMCardAdminState
OBJECT-TYPE
Administrative State of the STM1-4-ET Card.
1.3.6.1.4.1.2544.1.12.3.1.33.1.2AdminStateread-writecurrent
ethernetOverOCSTMCardOperationalState
OBJECT-TYPE
Operational State of the STM1-4-ET Card.
1.3.6.1.4.1.2544.1.12.3.1.33.1.3OperationalStateread-onlycurrent
ethernetOverOCSTMCardSecondaryState
OBJECT-TYPE
Secondary State of the STM1-4-ET Card.
1.3.6.1.4.1.2544.1.12.3.1.33.1.4SecondaryStateread-onlycurrent
ethernetOverOCSTMCardTemperature
OBJECT-TYPE
Temperature of the STM1-4-ET Card.
1.3.6.1.4.1.2544.1.12.3.1.33.1.5Integer32read-onlycurrent
ethernetOverOCSTMCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the STM1-4-ET Card.
1.3.6.1.4.1.2544.1.12.3.1.33.1.6TruthValueread-writecurrent
ethernetOverOCSTMCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the STM1-4-ET card.
1.3.6.1.4.1.2544.1.12.3.1.33.1.7RestartTyperead-writecurrent
ethernetOverOCSTMCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.33.1.8StorageTyperead-createcurrent
ethernetOverOCSTMCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetOverOCSTMCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetOverOCSTMCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.33.1.9RowStatusread-createcurrent
ethernetOverOCSTMCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.33.1.10TruthValueread-writecurrent
ethernetOverOCSTMCardMode
OBJECT-TYPE
This attribute is to show/set the SONET/SDH mode and OC3/OC12/STM1/STM4 speed for SONET/SDH..
1.3.6.1.4.1.2544.1.12.3.1.33.1.11PortCarrierTyperead-writecurrent
pseudoWireOcnStmCardTable
OBJECT-TYPE
Contains information on Pseudo Wire OCN STM Cards. These are supported on the FSP150CC GE206v product.
1.3.6.1.4.1.2544.1.12.3.1.34not-accessiblecurrent
pseudoWireOcnStmCardEntry
OBJECT-TYPE
A conceptual row in the pseudoWireOcnStmCardTable.
1.3.6.1.4.1.2544.1.12.3.1.34.1not-accessiblecurrent
pseudoWireOcnStmCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.1PhysicalIndexread-onlycurrent
pseudoWireOcnStmCardAdminState
OBJECT-TYPE
Administrative State of the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.2AdminStateread-writecurrent
pseudoWireOcnStmCardOperationalState
OBJECT-TYPE
Operational State of the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.3OperationalStateread-onlycurrent
pseudoWireOcnStmCardSecondaryState
OBJECT-TYPE
Secondary State of the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.4SecondaryStateread-onlycurrent
pseudoWireOcnStmCardIpAddress
OBJECT-TYPE
IP Address associated with the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.5IpAddressread-writecurrent
pseudoWireOcnStmCardMode
OBJECT-TYPE
Card Mode of with the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.6PWE3OCNSTMCardModeread-writecurrent
pseudoWireOcnStmCardVoltage
OBJECT-TYPE
Voltage of the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.7Integer32read-onlycurrent
pseudoWireOcnStmCardTemperature
OBJECT-TYPE
Temperature of the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.8Integer32read-onlycurrent
pseudoWireOcnStmCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Pseudo Wire OCN/STM card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.9RestartTyperead-writecurrent
pseudoWireOcnStmCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.34.1.10StorageTyperead-createcurrent
pseudoWireOcnStmCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pseudoWireOcnStmCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pseudoWireOcnStmCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pseudoWireOcnStmCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.34.1.11RowStatusread-createcurrent
pseudoWireOcnStmCardPSNEncapsulation
OBJECT-TYPE
This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets.
1.3.6.1.4.1.2544.1.12.3.1.34.1.12PSNEncapsulationModeread-writecurrent
pseudoWireOcnStmCardFreqSourceType
OBJECT-TYPE
This object represents the TDM Frequency source type of OC/STM card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.13TDMFrequencySourceTyperead-writecurrent
pseudoWireOcnStmCardFreqSource
OBJECT-TYPE
This object represents the TDM Frequency source of OC/STM card.
1.3.6.1.4.1.2544.1.12.3.1.34.1.14VariablePointerread-writecurrent
pseudoWireOcnStmCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.34.1.15TruthValueread-writecurrent
pseudoWireE1T1CardTable
OBJECT-TYPE
Contains information on Pseudo Wire T1/E1 Cards. These are supported on the FSP150CC GE206v product.
1.3.6.1.4.1.2544.1.12.3.1.35not-accessiblecurrent
pseudoWireE1T1CardEntry
OBJECT-TYPE
A conceptual row in the pseudoWireE1T1CardTable.
1.3.6.1.4.1.2544.1.12.3.1.35.1not-accessiblecurrent
pseudoWireE1T1CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Pseudo Wire T1/E1 Card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.1PhysicalIndexread-onlycurrent
pseudoWireE1T1CardAdminState
OBJECT-TYPE
Administrative State of the Pseudo Wire T1/E1 Card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.2AdminStateread-writecurrent
pseudoWireE1T1CardOperationalState
OBJECT-TYPE
Operational State of the Pseudo Wire T1/E1 Card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.3OperationalStateread-onlycurrent
pseudoWireE1T1CardSecondaryState
OBJECT-TYPE
Secondary State of the Pseudo Wire T1/E1 Card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.4SecondaryStateread-onlycurrent
pseudoWireE1T1CardIpAddress
OBJECT-TYPE
IP Address associated with the Pseudo Wire T1/E1 Card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.5IpAddressread-writecurrent
pseudoWireE1T1CardMode
OBJECT-TYPE
Card Mode of with the Pseudo Wire T1/E1 Card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.6PWE3E1T1CardModeread-writecurrent
pseudoWireE1T1CardVoltage
OBJECT-TYPE
Voltage of the Pseudo Wire T1/E1 Card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.7Integer32read-onlycurrent
pseudoWireE1T1CardTemperature
OBJECT-TYPE
Temperature of the Pseudo Wire T1/E1 Card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.8Integer32read-onlycurrent
pseudoWireE1T1CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Pseudo Wire T1/E1 card.
1.3.6.1.4.1.2544.1.12.3.1.35.1.9RestartTyperead-writecurrent
pseudoWireE1T1CardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.35.1.10StorageTyperead-createcurrent
pseudoWireE1T1CardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pseudoWireE1T1CardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pseudoWireE1T1CardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pseudoWireE1T1CardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.35.1.11RowStatusread-createcurrent
pseudoWireE1T1CardPSNEncapsulation
OBJECT-TYPE
This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets.
1.3.6.1.4.1.2544.1.12.3.1.35.1.12PSNEncapsulationModeread-writecurrent
ethernet1x10GHighPerCardTable
OBJECT-TYPE
Contains information on Ethernet 1x10G High Performance Cards.
1.3.6.1.4.1.2544.1.12.3.1.36not-accessiblecurrent
ethernet1x10GHighPerCardEntry
OBJECT-TYPE
A conceptual row in the ethernet1x10GHighPerCardTable.
1.3.6.1.4.1.2544.1.12.3.1.36.1not-accessiblecurrent
ethernet1x10GHighPerCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet 1x10G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.36.1.1PhysicalIndexread-onlycurrent
ethernet1x10GHighPerCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet 1x10G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.36.1.2AdminStateread-writecurrent
ethernet1x10GHighPerCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet 1x10G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.36.1.3OperationalStateread-onlycurrent
ethernet1x10GHighPerCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet 1x10G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.36.1.4SecondaryStateread-onlycurrent
ethernet1x10GHighPerCardTemperature
OBJECT-TYPE
Temperature of the Ethernet 1x10G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.36.1.5Integer32read-onlycurrent
ethernet1x10GHighPerCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.36.1.6TruthValueread-writecurrent
ethernet1x10GHighPerCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet 1x10G High Performance card.
1.3.6.1.4.1.2544.1.12.3.1.36.1.7RestartTyperead-writecurrent
ethernet1x10GHighPerCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.36.1.8StorageTyperead-createcurrent
ethernet1x10GHighPerCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet1x10GHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet1x10GHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.36.1.9RowStatusread-createcurrent
ethernet1x10GHighPerCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.36.1.10TruthValueread-writecurrent
ethernet10x1GHighPerCardTable
OBJECT-TYPE
Contains information on Ethernet 10x1G High Performance Cards.
1.3.6.1.4.1.2544.1.12.3.1.37not-accessiblecurrent
ethernet10x1GHighPerCardEntry
OBJECT-TYPE
A conceptual row in the ethernet10x1GHighPerCardTable.
1.3.6.1.4.1.2544.1.12.3.1.37.1not-accessiblecurrent
ethernet10x1GHighPerCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet 10x1G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.37.1.1PhysicalIndexread-onlycurrent
ethernet10x1GHighPerCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet 10x1G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.37.1.2AdminStateread-writecurrent
ethernet10x1GHighPerCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet 10x1G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.37.1.3OperationalStateread-onlycurrent
ethernet10x1GHighPerCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet 10x1G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.37.1.4SecondaryStateread-onlycurrent
ethernet10x1GHighPerCardTemperature
OBJECT-TYPE
Temperature of the Ethernet 10x1G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.37.1.5Integer32read-onlycurrent
ethernet10x1GHighPerCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet 10x1G High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.37.1.6TruthValueread-writecurrent
ethernet10x1GHighPerCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet 10x1G High Performance card.
1.3.6.1.4.1.2544.1.12.3.1.37.1.7RestartTyperead-writecurrent
ethernet10x1GHighPerCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.37.1.8StorageTyperead-createcurrent
ethernet10x1GHighPerCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet10x1GHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GHighPerCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet10x1GHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.37.1.9RowStatusread-createcurrent
ethernet10x1GHighPerCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.37.1.10TruthValueread-writecurrent
ethernetNTET1804CardTable
OBJECT-TYPE
Contains information on Ethernet NTE T1804 Cards. These are supported on the FSP150CC T1804 product.
1.3.6.1.4.1.2544.1.12.3.1.38not-accessiblecurrent
ethernetNTET1804CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTET1804CardTable.
1.3.6.1.4.1.2544.1.12.3.1.38.1not-accessiblecurrent
ethernetNTET1804CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE T1804 Card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.1PhysicalIndexread-onlycurrent
ethernetNTET1804CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE T1804 Card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.2AdminStateread-writecurrent
ethernetNTET1804CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE T1804 Card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.3OperationalStateread-onlycurrent
ethernetNTET1804CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE T1804 Card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.4SecondaryStateread-onlycurrent
ethernetNTET1804CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112S Card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.5Integer32read-onlycurrent
ethernetNTET1804CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE T1804 Card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.6Integer32read-onlycurrent
ethernetNTET1804CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE T1804 Card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.7TruthValueread-writecurrent
ethernetNTET1804CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE T1804 card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.8RestartTyperead-writecurrent
ethernetNTET1804CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.38.1.9CmPmIntervalTyperead-writecurrent
ethernetNTET1804CardMode
OBJECT-TYPE
This attribute is to show/set E1/T1 mode of the NET T1804 card.
1.3.6.1.4.1.2544.1.12.3.1.38.1.10PortCarrierTyperead-writecurrent
ethernetNTET3204CardTable
OBJECT-TYPE
Contains information on Ethernet NTE T3204 Cards. These are supported on the FSP150CC T3204 product.
1.3.6.1.4.1.2544.1.12.3.1.39not-accessiblecurrent
ethernetNTET3204CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTET3204CardTable.
1.3.6.1.4.1.2544.1.12.3.1.39.1not-accessiblecurrent
ethernetNTET3204CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE T3204 Card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.1PhysicalIndexread-onlycurrent
ethernetNTET3204CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE T3204 Card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.2AdminStateread-writecurrent
ethernetNTET3204CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE T3204 Card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.3OperationalStateread-onlycurrent
ethernetNTET3204CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE T3204 Card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.4SecondaryStateread-onlycurrent
ethernetNTET3204CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112S Card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.5Integer32read-onlycurrent
ethernetNTET3204CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE T3204 Card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.6Integer32read-onlycurrent
ethernetNTET3204CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE T3204 Card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.7TruthValueread-writecurrent
ethernetNTET3204CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE T3204 card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.8RestartTyperead-writecurrent
ethernetNTET3204CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.39.1.9CmPmIntervalTyperead-writecurrent
ethernetNTET3204CardMode
OBJECT-TYPE
This attribute is to show/set E3/T3 mode of the NET T3204 card.
1.3.6.1.4.1.2544.1.12.3.1.39.1.10PortCarrierTyperead-writecurrent
ethernetNTEGESyncProbeCardTable
OBJECT-TYPE
Contains information on Ethernet NTE-GE SyncProbe Card. These are supported on the FSP150CC GE SyncProbe product.
1.3.6.1.4.1.2544.1.12.3.1.40not-accessiblecurrent
ethernetNTEGESyncProbeCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGESyncProbeCardTable.
1.3.6.1.4.1.2544.1.12.3.1.40.1not-accessiblecurrent
ethernetNTEGESyncProbeCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE SyncProbe Card.
1.3.6.1.4.1.2544.1.12.3.1.40.1.1PhysicalIndexread-onlycurrent
ethernetNTEGESyncProbeCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE SyncProbe Card.
1.3.6.1.4.1.2544.1.12.3.1.40.1.2AdminStateread-writecurrent
ethernetNTEGESyncProbeCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE SyncProbe Card.
1.3.6.1.4.1.2544.1.12.3.1.40.1.3OperationalStateread-onlycurrent
ethernetNTEGESyncProbeCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE SyncProbe Card.
1.3.6.1.4.1.2544.1.12.3.1.40.1.4SecondaryStateread-onlycurrent
ethernetNTEGESyncProbeCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE SyncProbe Card.
1.3.6.1.4.1.2544.1.12.3.1.40.1.5Integer32read-onlycurrent
ethernetNTEGESyncProbeCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE SyncProbe Card.
1.3.6.1.4.1.2544.1.12.3.1.40.1.6Integer32read-onlycurrent
ethernetNTEGESyncProbeCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE SyncProbe Card.
1.3.6.1.4.1.2544.1.12.3.1.40.1.7TruthValueread-writecurrent
ethernetNTEGESyncProbeCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE SyncProbe card.
1.3.6.1.4.1.2544.1.12.3.1.40.1.8RestartTyperead-writecurrent
ethernetNTEGESyncProbeCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.40.1.9CmPmIntervalTyperead-writecurrent
ethernetGE8SCCCardTable
OBJECT-TYPE
Contains information on Ethernet XG210/SH1PCS Optical Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS product.
1.3.6.1.4.1.2544.1.12.3.1.41not-accessiblecurrent
ethernetGE8SCCCardEntry
OBJECT-TYPE
A conceptual row in the ethernetGE8SCCCardTable.
1.3.6.1.4.1.2544.1.12.3.1.41.1not-accessiblecurrent
ethernetGE8SCCCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.41.1.1PhysicalIndexread-onlycurrent
ethernetGE8SCCCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.41.1.2AdminStateread-writecurrent
ethernetGE8SCCCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.41.1.3OperationalStateread-onlycurrent
ethernetGE8SCCCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.41.1.4SecondaryStateread-onlycurrent
ethernetGE8SCCCardVoltage
OBJECT-TYPE
Voltage of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.41.1.5Integer32read-onlycurrent
ethernetGE8SCCCardTemperature
OBJECT-TYPE
Temperature of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.41.1.6Integer32read-onlycurrent
ethernetGE8SCCCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet GE-8S Connector card.
1.3.6.1.4.1.2544.1.12.3.1.41.1.7RestartTyperead-writecurrent
ethernetGE8SCCCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.41.1.8StorageTyperead-createcurrent
ethernetGE8SCCCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.41.1.9RowStatusread-createcurrent
ethernetNTEGE114HCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114H Cards. These are supported on the FSP150CC GE114H product.
1.3.6.1.4.1.2544.1.12.3.1.42not-accessiblecurrent
ethernetNTEGE114HCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114HCardTable.
1.3.6.1.4.1.2544.1.12.3.1.42.1not-accessiblecurrent
ethernetNTEGE114HCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114H Card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114HCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114H Card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.2AdminStateread-writecurrent
ethernetNTEGE114HCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114H Card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.3OperationalStateread-onlycurrent
ethernetNTEGE114HCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114H Card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114HCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.5Integer32read-onlycurrent
ethernetNTEGE114HCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114H Card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.6Integer32read-onlycurrent
ethernetNTEGE114HCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114H Card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.7TruthValueread-writecurrent
ethernetNTEGE114HCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114H card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.8RestartTyperead-writecurrent
ethernetNTEGE114HCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.42.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114HCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114H card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.10VariablePointerread-createcurrent
ethernetNTEGE114HCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114H card.
1.3.6.1.4.1.2544.1.12.3.1.42.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114PHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114PH Cards. These are supported on the FSP150CC GE114PH product.
1.3.6.1.4.1.2544.1.12.3.1.43not-accessiblecurrent
ethernetNTEGE114PHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114PHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.43.1not-accessiblecurrent
ethernetNTEGE114PHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114PH Card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114PHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114PH Card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.2AdminStateread-writecurrent
ethernetNTEGE114PHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114PH Card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.3OperationalStateread-onlycurrent
ethernetNTEGE114PHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114PH Card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114PHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.5Integer32read-onlycurrent
ethernetNTEGE114PHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114PH Card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.6Integer32read-onlycurrent
ethernetNTEGE114PHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114PH Card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.7TruthValueread-writecurrent
ethernetNTEGE114PHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114PH card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.8RestartTyperead-writecurrent
ethernetNTEGE114PHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.43.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114PHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114PH card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.10VariablePointerread-createcurrent
ethernetNTEGE114PHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114PH card.
1.3.6.1.4.1.2544.1.12.3.1.43.1.11SwitchPortActionread-writecurrent
ethernetFE36ECardTable
OBJECT-TYPE
Contains information on Ethernet 36x100M Cards.
1.3.6.1.4.1.2544.1.12.3.1.44not-accessiblecurrent
ethernetFE36ECardEntry
OBJECT-TYPE
A conceptual row in the ethernetFE36ECardTable.
1.3.6.1.4.1.2544.1.12.3.1.44.1not-accessiblecurrent
ethernetFE36ECardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet FE36E Card.
1.3.6.1.4.1.2544.1.12.3.1.44.1.1PhysicalIndexread-onlycurrent
ethernetFE36ECardAdminState
OBJECT-TYPE
Administrative State of the Ethernet FE36E Card.
1.3.6.1.4.1.2544.1.12.3.1.44.1.2AdminStateread-writecurrent
ethernetFE36ECardOperationalState
OBJECT-TYPE
Operational State of the Ethernet FE36E Card.
1.3.6.1.4.1.2544.1.12.3.1.44.1.3OperationalStateread-onlycurrent
ethernetFE36ECardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet FE36E Card.
1.3.6.1.4.1.2544.1.12.3.1.44.1.4SecondaryStateread-onlycurrent
ethernetFE36ECardTemperature
OBJECT-TYPE
Temperature of the Ethernet FE36E Card.
1.3.6.1.4.1.2544.1.12.3.1.44.1.5Integer32read-onlycurrent
ethernetFE36ECardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet FE36E card.
1.3.6.1.4.1.2544.1.12.3.1.44.1.6RestartTyperead-writecurrent
ethernetFE36ECardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.44.1.7StorageTyperead-createcurrent
ethernetFE36ECardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetFE36ECardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetFE36ECardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.44.1.8RowStatusread-createcurrent
ethernetFE36ECardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.44.1.9TruthValueread-writecurrent
ethernetFE36ECard8023azEnabled
OBJECT-TYPE
This object describes whether enable 802.3az energy efficient.
1.3.6.1.4.1.2544.1.12.3.1.44.1.10TruthValueread-writecurrent
ethernetNTEGE114SHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114SH Cards. These are supported on the FSP150CC GE114SH product.
1.3.6.1.4.1.2544.1.12.3.1.45not-accessiblecurrent
ethernetNTEGE114SHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114SHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.45.1not-accessiblecurrent
ethernetNTEGE114SHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114SH Card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114SHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114SH Card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.2AdminStateread-writecurrent
ethernetNTEGE114SHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114SH Card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.3OperationalStateread-onlycurrent
ethernetNTEGE114SHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114SH Card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114SHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112 Card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.5Integer32read-onlycurrent
ethernetNTEGE114SHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114SH Card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.6Integer32read-onlycurrent
ethernetNTEGE114SHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114SH Card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.7TruthValueread-writecurrent
ethernetNTEGE114SHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114SH card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.8RestartTyperead-writecurrent
ethernetNTEGE114SHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.45.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114SHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114SH card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.10VariablePointerread-createcurrent
ethernetNTEGE114SHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114SH card.
1.3.6.1.4.1.2544.1.12.3.1.45.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114SCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114S Cards. These are supported on the FSP150CC GE114S product.
1.3.6.1.4.1.2544.1.12.3.1.46not-accessiblecurrent
ethernetNTEGE114SCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114SCardTable.
1.3.6.1.4.1.2544.1.12.3.1.46.1not-accessiblecurrent
ethernetNTEGE114SCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114S Card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114SCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114S Card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.2AdminStateread-writecurrent
ethernetNTEGE114SCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114S Card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.3OperationalStateread-onlycurrent
ethernetNTEGE114SCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114S Card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114SCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112S Card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.5Integer32read-onlycurrent
ethernetNTEGE114SCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114S Card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.6Integer32read-onlycurrent
ethernetNTEGE114SCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114S Card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.7TruthValueread-writecurrent
ethernetNTEGE114SCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114S card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.8RestartTyperead-writecurrent
ethernetNTEGE114SCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.46.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114SCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114S card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.10VariablePointerread-createcurrent
ethernetNTEGE114SCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114S card.
1.3.6.1.4.1.2544.1.12.3.1.46.1.11SwitchPortActionread-writecurrent
stuHighPerCardTable
OBJECT-TYPE
Contains information on STU Cards.
1.3.6.1.4.1.2544.1.12.3.1.47not-accessiblecurrent
stuHighPerCardEntry
OBJECT-TYPE
A conceptual row in the stuHighPerCardTable.
1.3.6.1.4.1.2544.1.12.3.1.47.1not-accessiblecurrent
stuHighPerCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the STU High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.47.1.1PhysicalIndexread-onlycurrent
stuHighPerCardAdminState
OBJECT-TYPE
Administrative State of the Stu High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.47.1.2AdminStateread-writecurrent
stuHighPerCardOperationalState
OBJECT-TYPE
Operational State of the Stu High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.47.1.3OperationalStateread-onlycurrent
stuHighPerCardSecondaryState
OBJECT-TYPE
Secondary State of the Stu High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.47.1.4SecondaryStateread-onlycurrent
stuHighPerCardTemperature
OBJECT-TYPE
Temperature of the Stu High Performance Card.
1.3.6.1.4.1.2544.1.12.3.1.47.1.5Integer32read-onlycurrent
stuHighPerCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Stu High Performance card.
1.3.6.1.4.1.2544.1.12.3.1.47.1.6RestartTyperead-writecurrent
stuHighPerCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.47.1.7StorageTyperead-createcurrent
stuHighPerCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stuHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stuHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.47.1.8RowStatusread-createcurrent
stuHighPerCardForceOffLineAction
OBJECT-TYPE
On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
1.3.6.1.4.1.2544.1.12.3.1.47.1.9TruthValueread-writecurrent
stiHighPerTable
OBJECT-TYPE
Contains information on STI within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.48not-accessiblecurrent
stiHighPerEntry
OBJECT-TYPE
A conceptual row in the stiTable.
1.3.6.1.4.1.2544.1.12.3.1.48.1not-accessiblecurrent
stiHighPerEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the STI High Per card.
1.3.6.1.4.1.2544.1.12.3.1.48.1.1PhysicalIndexread-onlycurrent
stiHighPerAdminState
OBJECT-TYPE
Administrative State of the STI.
1.3.6.1.4.1.2544.1.12.3.1.48.1.2AdminStateread-writecurrent
stiHighPerOperationalState
OBJECT-TYPE
Operational State of the STI.
1.3.6.1.4.1.2544.1.12.3.1.48.1.3OperationalStateread-onlycurrent
stiHighPerSecondaryState
OBJECT-TYPE
Secondary State of the STI.
1.3.6.1.4.1.2544.1.12.3.1.48.1.4SecondaryStateread-onlycurrent
stiHighPerTemperature
OBJECT-TYPE
Temperature of the STI.
1.3.6.1.4.1.2544.1.12.3.1.48.1.5Integer32read-onlycurrent
stiHighPerStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.48.1.6StorageTyperead-createcurrent
stiHighPerRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stiRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.48.1.7RowStatusread-createcurrent
ethernetGE8ECCCardTable
OBJECT-TYPE
Contains information on Ethernet XG210 Optical Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products.
1.3.6.1.4.1.2544.1.12.3.1.49not-accessiblecurrent
ethernetGE8ECCCardEntry
OBJECT-TYPE
A conceptual row in the ethernetGE8ECCCardTable.
1.3.6.1.4.1.2544.1.12.3.1.49.1not-accessiblecurrent
ethernetGE8ECCCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.49.1.1PhysicalIndexread-onlycurrent
ethernetGE8ECCCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.49.1.2AdminStateread-writecurrent
ethernetGE8ECCCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.49.1.3OperationalStateread-onlycurrent
ethernetGE8ECCCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.49.1.4SecondaryStateread-onlycurrent
ethernetGE8ECCCardVoltage
OBJECT-TYPE
Voltage of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.49.1.5Integer32read-onlycurrent
ethernetGE8ECCCardTemperature
OBJECT-TYPE
Temperature of the Ethernet GE-8S Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.49.1.6Integer32read-onlycurrent
ethernetGE8ECCCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet GE-8S Connector card.
1.3.6.1.4.1.2544.1.12.3.1.49.1.7RestartTyperead-writecurrent
ethernetGE8ECCCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.49.1.8StorageTyperead-createcurrent
ethernetGE8ECCCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8ECCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8ECCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8ECCCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.49.1.9RowStatusread-createcurrent
networkElementLLDPParamsTable
OBJECT-TYPE
Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
1.3.6.1.4.1.2544.1.12.3.1.50not-accessiblecurrent
networkElementLLDPParamsEntry
OBJECT-TYPE
A conceptual row in the networkElementLLDPParamsTable.
1.3.6.1.4.1.2544.1.12.3.1.50.1not-accessiblecurrent
neLLDPParamsLLDPEnableAction
OBJECT-TYPE
This object allows user enable or disable LLDP on all the ports in the NE.
1.3.6.1.4.1.2544.1.12.3.1.50.1.1LLDPEnableActionread-createcurrent
ethernetNTESH1PCSCardTable
OBJECT-TYPE
Contains information on Ethernet NTE SH1PCS Cards. These are supported on the FSP150CC SH1PCS product.
1.3.6.1.4.1.2544.1.12.3.1.51not-accessiblecurrent
ethernetNTESH1PCSCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTESH1PCSCardTable.
1.3.6.1.4.1.2544.1.12.3.1.51.1not-accessiblecurrent
ethernetNTESH1PCSCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE SH1PCS Card.
1.3.6.1.4.1.2544.1.12.3.1.51.1.1PhysicalIndexread-onlycurrent
ethernetNTESH1PCSCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE SH1PCS Card.
1.3.6.1.4.1.2544.1.12.3.1.51.1.2AdminStateread-writecurrent
ethernetNTESH1PCSCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE SH1PCS Card.
1.3.6.1.4.1.2544.1.12.3.1.51.1.3OperationalStateread-onlycurrent
ethernetNTESH1PCSCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE SH1PCS Card.
1.3.6.1.4.1.2544.1.12.3.1.51.1.4SecondaryStateread-onlycurrent
ethernetNTESH1PCSCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE SH1PCS Card.
1.3.6.1.4.1.2544.1.12.3.1.51.1.5Integer32read-onlycurrent
ethernetNTESH1PCSCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE SH1PCS Card.
1.3.6.1.4.1.2544.1.12.3.1.51.1.6Integer32read-onlycurrent
ethernetNTESH1PCSCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE SH1PCS Card.
1.3.6.1.4.1.2544.1.12.3.1.51.1.7TruthValueread-writecurrent
ethernetNTESH1PCSCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE SH1PCS card.
1.3.6.1.4.1.2544.1.12.3.1.51.1.8RestartTyperead-writecurrent
ethernetNTESH1PCSCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.51.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEOSA5411CardTable
OBJECT-TYPE
Contains information on Ethernet NTE OSA5411 Card. These are supported on the FSP150CC OSA5411 product.
1.3.6.1.4.1.2544.1.12.3.1.52not-accessiblecurrent
ethernetNTEOSA5411CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEOSA5411CardTable.
1.3.6.1.4.1.2544.1.12.3.1.52.1not-accessiblecurrent
ethernetNTEOSA5411CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE OSA5411 Card.
1.3.6.1.4.1.2544.1.12.3.1.52.1.1PhysicalIndexread-onlycurrent
ethernetNTEOSA5411CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE OSA5411 Card.
1.3.6.1.4.1.2544.1.12.3.1.52.1.2AdminStateread-writecurrent
ethernetNTEOSA5411CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE OSA5411 Card.
1.3.6.1.4.1.2544.1.12.3.1.52.1.3OperationalStateread-onlycurrent
ethernetNTEOSA5411CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE OSA5411 Card.
1.3.6.1.4.1.2544.1.12.3.1.52.1.4SecondaryStateread-onlycurrent
ethernetNTEOSA5411CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE OSA5411 Card.
1.3.6.1.4.1.2544.1.12.3.1.52.1.5Integer32read-onlycurrent
ethernetNTEOSA5411CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE OSA5411 Card.
1.3.6.1.4.1.2544.1.12.3.1.52.1.6Integer32read-onlycurrent
ethernetNTEOSA5411CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5411 Card.
1.3.6.1.4.1.2544.1.12.3.1.52.1.7TruthValueread-writecurrent
ethernetNTEOSA5411CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE OSA5411 card.
1.3.6.1.4.1.2544.1.12.3.1.52.1.8RestartTyperead-writecurrent
ethernetNTEOSA5411CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.52.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE112ProCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.53not-accessiblecurrent
ethernetNTEGE112ProCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE112ProCardTable.
1.3.6.1.4.1.2544.1.12.3.1.53.1not-accessiblecurrent
ethernetNTEGE112ProCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE112ProCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.2AdminStateread-writecurrent
ethernetNTEGE112ProCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE112Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.3OperationalStateread-onlycurrent
ethernetNTEGE112ProCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE112Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.4SecondaryStateread-onlycurrent
ethernetNTEGE112ProCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.5Integer32read-onlycurrent
ethernetNTEGE112ProCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE112Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.6Integer32read-onlycurrent
ethernetNTEGE112ProCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.7TruthValueread-writecurrent
ethernetNTEGE112ProCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112Pro card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.8RestartTyperead-writecurrent
ethernetNTEGE112ProCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.53.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE112ProCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE112Pro card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.10VariablePointerread-createcurrent
ethernetNTEGE112ProCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112Pro card.
1.3.6.1.4.1.2544.1.12.3.1.53.1.11SwitchPortActionread-writecurrent
ethernetNTEGE112ProMCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.54not-accessiblecurrent
ethernetNTEGE112ProMCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE112ProMCardTable.
1.3.6.1.4.1.2544.1.12.3.1.54.1not-accessiblecurrent
ethernetNTEGE112ProMCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE112ProMCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.2AdminStateread-writecurrent
ethernetNTEGE112ProMCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE112ProM Card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.3OperationalStateread-onlycurrent
ethernetNTEGE112ProMCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE112ProM Card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.4SecondaryStateread-onlycurrent
ethernetNTEGE112ProMCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112ProM Card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.5Integer32read-onlycurrent
ethernetNTEGE112ProMCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE112ProM Card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.6Integer32read-onlycurrent
ethernetNTEGE112ProMCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProM Card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.7TruthValueread-writecurrent
ethernetNTEGE112ProMCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112ProM card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.8RestartTyperead-writecurrent
ethernetNTEGE112ProMCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.54.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE112ProMCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE112ProM card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.10VariablePointerread-createcurrent
ethernetNTEGE112ProMCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112ProM card.
1.3.6.1.4.1.2544.1.12.3.1.54.1.11SwitchPortActionread-writecurrent
ethernetNTEXG210CCardTable
OBJECT-TYPE
Contains information on Ethernet NTE XG210 Cards. These are supported on the FSP150CC XG210 product.
1.3.6.1.4.1.2544.1.12.3.1.55not-accessiblecurrent
ethernetNTEXG210CCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEXG210CCardTable.
1.3.6.1.4.1.2544.1.12.3.1.55.1not-accessiblecurrent
ethernetNTEXG210CCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE XG210C Card.
1.3.6.1.4.1.2544.1.12.3.1.55.1.1PhysicalIndexread-onlycurrent
ethernetNTEXG210CCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE XG210C Card.
1.3.6.1.4.1.2544.1.12.3.1.55.1.2AdminStateread-writecurrent
ethernetNTEXG210CCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE XG210C Card.
1.3.6.1.4.1.2544.1.12.3.1.55.1.3OperationalStateread-onlycurrent
ethernetNTEXG210CCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE XG210C Card.
1.3.6.1.4.1.2544.1.12.3.1.55.1.4SecondaryStateread-onlycurrent
ethernetNTEXG210CCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE XG210C Card.
1.3.6.1.4.1.2544.1.12.3.1.55.1.5Integer32read-onlycurrent
ethernetNTEXG210CCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE XG210C Card.
1.3.6.1.4.1.2544.1.12.3.1.55.1.6Integer32read-onlycurrent
ethernetNTEXG210CCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG210C Card.
1.3.6.1.4.1.2544.1.12.3.1.55.1.7TruthValueread-writecurrent
ethernetNTEXG210CCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE XG210 card.
1.3.6.1.4.1.2544.1.12.3.1.55.1.8RestartTyperead-writecurrent
ethernetNTEXG210CCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.55.1.9CmPmIntervalTyperead-writecurrent
ethernetGE8SCryptoConnectorCardTable
OBJECT-TYPE
Contains information on Ethernet XG210C Optical Port Expander Cards. These are supported on the XG210C MACSEC board.
1.3.6.1.4.1.2544.1.12.3.1.56not-accessiblecurrent
ethernetGE8SCryptoConnectorCardEntry
OBJECT-TYPE
A conceptual row in the ethernetGE8SCryptoConnectorCardTable.
1.3.6.1.4.1.2544.1.12.3.1.56.1not-accessiblecurrent
ethernetGE8SCryptoConnectorCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet GE-8SC Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.56.1.1PhysicalIndexread-onlycurrent
ethernetGE8SCryptoConnectorCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet GE-8SC Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.56.1.2AdminStateread-writecurrent
ethernetGE8SCryptoConnectorCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet GE-8SC Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.56.1.3OperationalStateread-onlycurrent
ethernetGE8SCryptoConnectorCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet GE-8SC Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.56.1.4SecondaryStateread-onlycurrent
ethernetGE8SCryptoConnectorCardVoltage
OBJECT-TYPE
Voltage of the Ethernet GE-8SC Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.56.1.5Integer32read-onlycurrent
ethernetGE8SCryptoConnectorCardTemperature
OBJECT-TYPE
Temperature of the Ethernet GE-8SC Connector Card.
1.3.6.1.4.1.2544.1.12.3.1.56.1.6Integer32read-onlycurrent
ethernetGE8SCryptoConnectorCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet GE-8SC Connector card.
1.3.6.1.4.1.2544.1.12.3.1.56.1.7RestartTyperead-writecurrent
ethernetGE8SCryptoConnectorCardStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.3.1.56.1.8StorageTyperead-createcurrent
ethernetGE8SCryptoConnectorCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8SCryptoConnectorCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8SCryptoConnectorCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8SCryptoConnectorCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.56.1.9RowStatusread-createcurrent
ethernetNTEGE114ProCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.57not-accessiblecurrent
ethernetNTEGE114ProCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProCardTable.
1.3.6.1.4.1.2544.1.12.3.1.57.1not-accessiblecurrent
ethernetNTEGE114ProCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.2AdminStateread-writecurrent
ethernetNTEGE114ProCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.5Integer32read-onlycurrent
ethernetNTEGE114ProCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.6Integer32read-onlycurrent
ethernetNTEGE114ProCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.7TruthValueread-writecurrent
ethernetNTEGE114ProCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114Pro card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.57.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114Pro card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114Pro card.
1.3.6.1.4.1.2544.1.12.3.1.57.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114ProCCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.58not-accessiblecurrent
ethernetNTEGE114ProCCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProCCardTable.
1.3.6.1.4.1.2544.1.12.3.1.58.1not-accessiblecurrent
ethernetNTEGE114ProCCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProCCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.2AdminStateread-writecurrent
ethernetNTEGE114ProCCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114ProC Card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProCCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114ProC Card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProCCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114ProC Card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.5Integer32read-onlycurrent
ethernetNTEGE114ProCCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114ProC Card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.6Integer32read-onlycurrent
ethernetNTEGE114ProCCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProC Card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.7TruthValueread-writecurrent
ethernetNTEGE114ProCCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProC card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProCCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.58.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProCCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114ProC card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProCCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProC card.
1.3.6.1.4.1.2544.1.12.3.1.58.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114ProSHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.59not-accessiblecurrent
ethernetNTEGE114ProSHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProSHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.59.1not-accessiblecurrent
ethernetNTEGE114ProSHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProSHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.2AdminStateread-writecurrent
ethernetNTEGE114ProSHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProSHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProSHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.5Integer32read-onlycurrent
ethernetNTEGE114ProSHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.6Integer32read-onlycurrent
ethernetNTEGE114ProSHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.7TruthValueread-writecurrent
ethernetNTEGE114ProSHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProS card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProSHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.59.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProSHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114ProSH card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProSHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProSH card.
1.3.6.1.4.1.2544.1.12.3.1.59.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114ProCSHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.60not-accessiblecurrent
ethernetNTEGE114ProCSHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProCSHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.60.1not-accessiblecurrent
ethernetNTEGE114ProCSHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProCSHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.2AdminStateread-writecurrent
ethernetNTEGE114ProCSHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114ProCS Card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProCSHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114ProCS Card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProCSHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114ProCS Card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.5Integer32read-onlycurrent
ethernetNTEGE114ProCSHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114ProCS Card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.6Integer32read-onlycurrent
ethernetNTEGE114ProCSHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProCS Card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.7TruthValueread-writecurrent
ethernetNTEGE114ProCSHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProCS card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProCSHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.60.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProCSHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114ProCS card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProCSHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProCS card.
1.3.6.1.4.1.2544.1.12.3.1.60.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114ProHECardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.61not-accessiblecurrent
ethernetNTEGE114ProHECardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProHECardTable.
1.3.6.1.4.1.2544.1.12.3.1.61.1not-accessiblecurrent
ethernetNTEGE114ProHECardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProHECardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.2AdminStateread-writecurrent
ethernetNTEGE114ProHECardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114ProHE Card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProHECardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114ProHE Card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProHECardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114ProHE Card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.5Integer32read-onlycurrent
ethernetNTEGE114ProHECardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114ProHE Card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.6Integer32read-onlycurrent
ethernetNTEGE114ProHECardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProHE Card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.7TruthValueread-writecurrent
ethernetNTEGE114ProHECardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProHE card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProHECardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.61.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProHECardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114ProHE card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProHECardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProHE card.
1.3.6.1.4.1.2544.1.12.3.1.61.1.11SwitchPortActionread-writecurrent
ethernetNTEGE112ProHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.62not-accessiblecurrent
ethernetNTEGE112ProHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE112ProHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.62.1not-accessiblecurrent
ethernetNTEGE112ProHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE112ProHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE112 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.2AdminStateread-writecurrent
ethernetNTEGE112ProHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE112ProH Card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.3OperationalStateread-onlycurrent
ethernetNTEGE112ProHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE112ProH Card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.4SecondaryStateread-onlycurrent
ethernetNTEGE112ProHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112ProH Card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.5Integer32read-onlycurrent
ethernetNTEGE112ProHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE112ProH Card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.6Integer32read-onlycurrent
ethernetNTEGE112ProHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProH Card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.7TruthValueread-writecurrent
ethernetNTEGE112ProHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112ProH card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.8RestartTyperead-writecurrent
ethernetNTEGE112ProHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.62.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE112ProHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE112ProH card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.10VariablePointerread-createcurrent
ethernetNTEGE112ProHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112ProH card.
1.3.6.1.4.1.2544.1.12.3.1.62.1.11SwitchPortActionread-writecurrent
ethernetNTEOSA5420CardTable
OBJECT-TYPE
Contains information on Ethernet NTE OSA5420 Card. These are supported on the FSP150CC OSA5420 product.
1.3.6.1.4.1.2544.1.12.3.1.63not-accessiblecurrent
ethernetNTEOSA5420CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEOSA5420CardTable.
1.3.6.1.4.1.2544.1.12.3.1.63.1not-accessiblecurrent
ethernetNTEOSA5420CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE OSA5420 Card.
1.3.6.1.4.1.2544.1.12.3.1.63.1.1PhysicalIndexread-onlycurrent
ethernetNTEOSA5420CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE OSA5420 Card.
1.3.6.1.4.1.2544.1.12.3.1.63.1.2AdminStateread-writecurrent
ethernetNTEOSA5420CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE OSA5420 Card.
1.3.6.1.4.1.2544.1.12.3.1.63.1.3OperationalStateread-onlycurrent
ethernetNTEOSA5420CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE OSA5420 Card.
1.3.6.1.4.1.2544.1.12.3.1.63.1.4SecondaryStateread-onlycurrent
ethernetNTEOSA5420CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE OSA5420 Card.
1.3.6.1.4.1.2544.1.12.3.1.63.1.5Integer32read-onlycurrent
ethernetNTEOSA5420CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE OSA5420 Card.
1.3.6.1.4.1.2544.1.12.3.1.63.1.6Integer32read-onlycurrent
ethernetNTEOSA5420CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5420 Card.
1.3.6.1.4.1.2544.1.12.3.1.63.1.7TruthValueread-writecurrent
ethernetNTEOSA5420CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE OSA5420 card.
1.3.6.1.4.1.2544.1.12.3.1.63.1.8RestartTyperead-writecurrent
ethernetNTEOSA5420CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.63.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEOSA5421CardTable
OBJECT-TYPE
Contains information on Ethernet NTE OSA5421 Card. These are supported on the FSP150CC OSA5421 product.
1.3.6.1.4.1.2544.1.12.3.1.64not-accessiblecurrent
ethernetNTEOSA5421CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEOSA5421CardTable.
1.3.6.1.4.1.2544.1.12.3.1.64.1not-accessiblecurrent
ethernetNTEOSA5421CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE OSA5421 Card.
1.3.6.1.4.1.2544.1.12.3.1.64.1.1PhysicalIndexread-onlycurrent
ethernetNTEOSA5421CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE OSA5421 Card.
1.3.6.1.4.1.2544.1.12.3.1.64.1.2AdminStateread-writecurrent
ethernetNTEOSA5421CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE OSA5421 Card.
1.3.6.1.4.1.2544.1.12.3.1.64.1.3OperationalStateread-onlycurrent
ethernetNTEOSA5421CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE OSA5421 Card.
1.3.6.1.4.1.2544.1.12.3.1.64.1.4SecondaryStateread-onlycurrent
ethernetNTEOSA5421CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE OSA5421 Card.
1.3.6.1.4.1.2544.1.12.3.1.64.1.5Integer32read-onlycurrent
ethernetNTEOSA5421CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE OSA5421 Card.
1.3.6.1.4.1.2544.1.12.3.1.64.1.6Integer32read-onlycurrent
ethernetNTEOSA5421CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5421 Card.
1.3.6.1.4.1.2544.1.12.3.1.64.1.7TruthValueread-writecurrent
ethernetNTEOSA5421CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE OSA5421 card.
1.3.6.1.4.1.2544.1.12.3.1.64.1.8RestartTyperead-writecurrent
ethernetNTEOSA5421CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.64.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114GCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114G Cards. These are supported on the FSP150CC GE114G product.
1.3.6.1.4.1.2544.1.12.3.1.65not-accessiblecurrent
ethernetNTEGE114GCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114GCardTable.
1.3.6.1.4.1.2544.1.12.3.1.65.1not-accessiblecurrent
ethernetNTEGE114GCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114G Card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114GCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114G Card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.2AdminStateread-writecurrent
ethernetNTEGE114GCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114G Card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.3OperationalStateread-onlycurrent
ethernetNTEGE114GCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114G Card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114GCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114G Card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.5Integer32read-onlycurrent
ethernetNTEGE114GCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114G Card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.6Integer32read-onlycurrent
ethernetNTEGE114GCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114G Card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.7TruthValueread-writecurrent
ethernetNTEGE114GCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114G card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.8RestartTyperead-writecurrent
ethernetNTEGE114GCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.65.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114GCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114G card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.10VariablePointerread-createcurrent
ethernetNTEGE114GCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114G card.
1.3.6.1.4.1.2544.1.12.3.1.65.1.11SwitchPortActionread-writecurrent
bits16PortCardTable
OBJECT-TYPE
A list of entries corresponding to BITS 16 Port Expansion Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.66not-accessiblecurrent
bits16PortCardEntry
OBJECT-TYPE
A conceptual row in the bits16PortCardTable
1.3.6.1.4.1.2544.1.12.3.1.66.1not-accessiblecurrent
bits16PortCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.66.1.1PhysicalIndexread-onlycurrent
bits16PortCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.66.1.2AdminStateread-writecurrent
bits16PortCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.66.1.3OperationalStateread-onlycurrent
bits16PortCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.66.1.4SecondaryStateread-onlycurrent
bits16PortCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of bits16PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with bits16PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The bits16PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.66.1.5RowStatusread-createcurrent
bits16PortCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.66.1.6DisplayString (SIZE(0..256))read-writecurrent
bits16PortCardTemperature
OBJECT-TYPE
Temperature of the BITS 16 Port Expansion Card
1.3.6.1.4.1.2544.1.12.3.1.66.1.7Integer32read-onlycurrent
ethernetNTEGE114ProVmHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114 Pro VM-H Cards. These are supported on the FSP150CC GE114 Pro VM-H product.
1.3.6.1.4.1.2544.1.12.3.1.67not-accessiblecurrent
ethernetNTEGE114ProVmHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProVmHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.67.1not-accessiblecurrent
ethernetNTEGE114ProVmHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-H Card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProVmHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114 Pro VM-H Card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.2AdminStateread-writecurrent
ethernetNTEGE114ProVmHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114ProVmH Card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProVmHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114ProVmH Card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProVmHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114ProVmH Card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.5Integer32read-onlycurrent
ethernetNTEGE114ProVmHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114ProVmH Card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.6Integer32read-onlycurrent
ethernetNTEGE114ProVmHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProVmH Card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.7TruthValueread-writecurrent
ethernetNTEGE114ProVmHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProVmH card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProVmHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.67.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProVmHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114ProVmH card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProVmHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProVmH card.
1.3.6.1.4.1.2544.1.12.3.1.67.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114ProVmCHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114 Pro VM-CH Cards. These are supported on the FSP150CC GE114 Pro VM-CH product.
1.3.6.1.4.1.2544.1.12.3.1.68not-accessiblecurrent
ethernetNTEGE114ProVmCHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProVmCHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.68.1not-accessiblecurrent
ethernetNTEGE114ProVmCHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-CH Card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProVmCHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114 Pro VM-CH Card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.2AdminStateread-writecurrent
ethernetNTEGE114ProVmCHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114ProVmCH Card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProVmCHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114ProVmCH Card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProVmCHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114ProVmCH Card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.5Integer32read-onlycurrent
ethernetNTEGE114ProVmCHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114ProVmCH Card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.6Integer32read-onlycurrent
ethernetNTEGE114ProVmCHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProVmCH Card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.7TruthValueread-writecurrent
ethernetNTEGE114ProVmCHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProVmCH card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProVmCHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.68.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProVmCHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114ProVmCH card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProVmCHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProVmCH card.
1.3.6.1.4.1.2544.1.12.3.1.68.1.11SwitchPortActionread-writecurrent
ethernetNTEGE114ProVmCSHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114 Pro VM-CSH Cards. These are supported on the FSP150CC GE114 Pro VM-CSH product.
1.3.6.1.4.1.2544.1.12.3.1.69not-accessiblecurrent
ethernetNTEGE114ProVmCSHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProVmCSHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.69.1not-accessiblecurrent
ethernetNTEGE114ProVmCSHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-CSH Card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProVmCSHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114 Pro VM-CSH Card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.2AdminStateread-writecurrent
ethernetNTEGE114ProVmCSHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114ProVmCSH Card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProVmCSHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114ProVmCSH Card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProVmCSHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114ProVmCSH Card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.5Integer32read-onlycurrent
ethernetNTEGE114ProVmCSHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114ProVmCSH Card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.6Integer32read-onlycurrent
ethernetNTEGE114ProVmCSHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProVmCSH Card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.7TruthValueread-writecurrent
ethernetNTEGE114ProVmCSHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProVmCSH card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProVmCSHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.69.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProVmCSHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114ProVmCSH card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProVmCSHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProVmCSH card.
1.3.6.1.4.1.2544.1.12.3.1.69.1.11SwitchPortActionread-writecurrent
serverCardTable
OBJECT-TYPE
Contains information on ServerCard within the Shelf.
1.3.6.1.4.1.2544.1.12.3.1.70not-accessiblecurrent
serverCardEntry
OBJECT-TYPE
A conceptual row in the serverCardTable.
1.3.6.1.4.1.2544.1.12.3.1.70.1not-accessiblecurrent
serverCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.1PhysicalIndexread-onlycurrent
serverCardAdminState
OBJECT-TYPE
Administrative State of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.2AdminStateread-writecurrent
serverCardOperationalState
OBJECT-TYPE
Operational State of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.3OperationalStateread-onlycurrent
serverCardSecondaryState
OBJECT-TYPE
Secondary State of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.4SecondaryStateread-onlycurrent
serverCardStorageType
OBJECT-TYPE
Storage Type of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.5StorageTyperead-createcurrent
serverCardVoltage
OBJECT-TYPE
Voltage of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.6Integer32read-onlycurrent
serverCardTemperature
OBJECT-TYPE
Temperature of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.7Integer32read-onlycurrent
serverCardUpTime
OBJECT-TYPE
Up time of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.8Integer32read-onlycurrent
serverCardVmNumber
OBJECT-TYPE
VM number of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.9Integer32read-onlycurrent
serverCardVirtualCpuTotal
OBJECT-TYPE
Total virtual CPU of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.10Integer32read-onlycurrent
serverCardVirtualCpuAvailiable
OBJECT-TYPE
Availiable virtual CPU of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.11Integer32read-onlycurrent
serverCardMemoryTotal
OBJECT-TYPE
Total memory of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.12Integer32read-onlycurrent
serverCardMemoryAvailiable
OBJECT-TYPE
Availiable memory of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.13Integer32read-onlycurrent
serverCardStorageTotal
OBJECT-TYPE
Total storage of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.14Integer32read-onlycurrent
serverCardStorageAvailiable
OBJECT-TYPE
Availiable storage of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.15Integer32read-onlycurrent
serverCardHvVersion
OBJECT-TYPE
HV version of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.16DisplayString (SIZE(0..64))read-onlycurrent
serverCardHostName
OBJECT-TYPE
Hostname of the Server Card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.17DisplayString (SIZE(0..64))read-createcurrent
serverCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the VM server card.
1.3.6.1.4.1.2544.1.12.3.1.70.1.18RestartTyperead-writecurrent
serverCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of serverCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with serverCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The serverCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.70.1.19RowStatusread-createcurrent
serverCardIgnoreWatchdog
OBJECT-TYPE
Ignore keep-alive watchdog.
1.3.6.1.4.1.2544.1.12.3.1.70.1.20TruthValueread-writecurrent
pps16PortCardTable
OBJECT-TYPE
A list of entries corresponding to BITS 16 Port Expansion Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.71not-accessiblecurrent
pps16PortCardEntry
OBJECT-TYPE
A conceptual row in the pps16PortCardTable
1.3.6.1.4.1.2544.1.12.3.1.71.1not-accessiblecurrent
pps16PortCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.71.1.1PhysicalIndexread-onlycurrent
pps16PortCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.71.1.2AdminStateread-writecurrent
pps16PortCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.71.1.3OperationalStateread-onlycurrent
pps16PortCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.71.1.4SecondaryStateread-onlycurrent
pps16PortCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pps16PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pps16PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pps16PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.71.1.5RowStatusread-createcurrent
pps16PortCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.71.1.6DisplayString (SIZE(0..256))read-writecurrent
clk16PortCardTable
OBJECT-TYPE
A list of entries corresponding to BITS 16 Port Expansion Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.72not-accessiblecurrent
clk16PortCardEntry
OBJECT-TYPE
A conceptual row in the clk16PortCardTable
1.3.6.1.4.1.2544.1.12.3.1.72.1not-accessiblecurrent
clk16PortCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.72.1.1PhysicalIndexread-onlycurrent
clk16PortCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.72.1.2AdminStateread-writecurrent
clk16PortCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.72.1.3OperationalStateread-onlycurrent
clk16PortCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.72.1.4SecondaryStateread-onlycurrent
clk16PortCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with clk16PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.72.1.5RowStatusread-createcurrent
clk16PortCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.72.1.6DisplayString (SIZE(0..256))read-writecurrent
todPps16PortCardTable
OBJECT-TYPE
A list of entries corresponding to BITS 16 Port Expansion Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.73not-accessiblecurrent
todPps16PortCardEntry
OBJECT-TYPE
A conceptual row in the todPps16PortCardTable
1.3.6.1.4.1.2544.1.12.3.1.73.1not-accessiblecurrent
todPps16PortCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.73.1.1PhysicalIndexread-onlycurrent
todPps16PortCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.73.1.2AdminStateread-writecurrent
todPps16PortCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.73.1.3OperationalStateread-onlycurrent
todPps16PortCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.73.1.4SecondaryStateread-onlycurrent
todPps16PortCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of todPps16PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with todPps16PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The todPps16PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.73.1.5RowStatusread-createcurrent
todPps16PortCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.73.1.6DisplayString (SIZE(0..256))read-writecurrent
ethernetNTEGE101ProCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE101 Pro Cards. These are supported on the FSP150CC GE101 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.74not-accessiblecurrent
ethernetNTEGE101ProCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE101ProCardTable.
1.3.6.1.4.1.2544.1.12.3.1.74.1not-accessiblecurrent
ethernetNTEGE101ProCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE101ProCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE101 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.2AdminStateread-writecurrent
ethernetNTEGE101ProCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE101Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.3OperationalStateread-onlycurrent
ethernetNTEGE101ProCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE101Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.4SecondaryStateread-onlycurrent
ethernetNTEGE101ProCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE101Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.5Integer32read-onlycurrent
ethernetNTEGE101ProCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE101Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.6Integer32read-onlycurrent
ethernetNTEGE101ProCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE101Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.7TruthValueread-writecurrent
ethernetNTEGE101ProCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE101Pro card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.8RestartTyperead-writecurrent
ethernetNTEGE101ProCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.74.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE101ProCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE101Pro card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.10VariablePointerread-createcurrent
ethernetNTEGE101ProCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE101Pro card.
1.3.6.1.4.1.2544.1.12.3.1.74.1.11SwitchPortActionread-writecurrent
ethernetNTEGO102ProSCardTable
OBJECT-TYPE
Contains information on Ethernet NTE Pro GO102Pro S Cards. These are supported on the FSP150CC GO102ProS product.
1.3.6.1.4.1.2544.1.12.3.1.75not-accessiblecurrent
ethernetNTEGO102ProSCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGO102ProSCardTable.
1.3.6.1.4.1.2544.1.12.3.1.75.1not-accessiblecurrent
ethernetNTEGO102ProSCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GO102ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.1PhysicalIndexread-onlycurrent
ethernetNTEGO102ProSCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GO102ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.2AdminStateread-writecurrent
ethernetNTEGO102ProSCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GO102ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.3OperationalStateread-onlycurrent
ethernetNTEGO102ProSCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GO102ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.4SecondaryStateread-onlycurrent
ethernetNTEGO102ProSCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GO102ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.5Integer32read-onlycurrent
ethernetNTEGO102ProSCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GO102ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.6Integer32read-onlycurrent
ethernetNTEGO102ProSCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GO102ProS Card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.7TruthValueread-writecurrent
ethernetNTEGO102ProSCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GO102ProS card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.8RestartTyperead-writecurrent
ethernetNTEGO102ProSCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.75.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGO102ProSCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GO102ProS card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.10VariablePointerread-createcurrent
ethernetNTEGO102ProSCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GO102ProS card.
1.3.6.1.4.1.2544.1.12.3.1.75.1.11SwitchPortActionread-writecurrent
ethernetNTEGO102ProSPCardTable
OBJECT-TYPE
Contains information on Ethernet NTE Pro Rugged S Cards. These are supported on the FSP150CC GO102ProSP product.
1.3.6.1.4.1.2544.1.12.3.1.76not-accessiblecurrent
ethernetNTEGO102ProSPCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGO102ProSPCardTable.
1.3.6.1.4.1.2544.1.12.3.1.76.1not-accessiblecurrent
ethernetNTEGO102ProSPCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GO102ProSP Card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.1PhysicalIndexread-onlycurrent
ethernetNTEGO102ProSPCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GO102ProSP Card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.2AdminStateread-writecurrent
ethernetNTEGO102ProSPCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GO102ProSP Card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.3OperationalStateread-onlycurrent
ethernetNTEGO102ProSPCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GO102ProSP Card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.4SecondaryStateread-onlycurrent
ethernetNTEGO102ProSPCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GO102ProSP Card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.5Integer32read-onlycurrent
ethernetNTEGO102ProSPCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GO102ProSP Card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.6Integer32read-onlycurrent
ethernetNTEGO102ProSPCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GO102ProSP Card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.7TruthValueread-writecurrent
ethernetNTEGO102ProSPCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GO102ProSP card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.8RestartTyperead-writecurrent
ethernetNTEGO102ProSPCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.76.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGO102ProSPCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GO102ProSP card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.10VariablePointerread-createcurrent
ethernetNTEGO102ProSPCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GO102ProSP card.
1.3.6.1.4.1.2544.1.12.3.1.76.1.11SwitchPortActionread-writecurrent
ethernetNTECX101Pro30ACardTable
OBJECT-TYPE
Contains information on Ethernet NTE Pro Rugged S Cards. These are supported on the FSP150CC GE101 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.77not-accessiblecurrent
ethernetNTECX101Pro30ACardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTECX101Pro30ACardTable.
1.3.6.1.4.1.2544.1.12.3.1.77.1not-accessiblecurrent
ethernetNTECX101Pro30ACardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE CX101PRO 30A Card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.1PhysicalIndexread-onlycurrent
ethernetNTECX101Pro30ACardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE CX101PRO 30A Card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.2AdminStateread-writecurrent
ethernetNTECX101Pro30ACardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE CX101Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.3OperationalStateread-onlycurrent
ethernetNTECX101Pro30ACardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE CX101Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.4SecondaryStateread-onlycurrent
ethernetNTECX101Pro30ACardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE CX101Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.5Integer32read-onlycurrent
ethernetNTECX101Pro30ACardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE CX101Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.6Integer32read-onlycurrent
ethernetNTECX101Pro30ACardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE CX101Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.7TruthValueread-writecurrent
ethernetNTECX101Pro30ACardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE CX101Pro30A card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.8RestartTyperead-writecurrent
ethernetNTECX101Pro30ACardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.77.1.9CmPmIntervalTyperead-writecurrent
ethernetNTECX101Pro30ACardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE CX101Pro30A card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.10VariablePointerread-createcurrent
ethernetNTECX101Pro30ACardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE CX101Pro30A card.
1.3.6.1.4.1.2544.1.12.3.1.77.1.11SwitchPortActionread-writecurrent
ethernetNTECX102Pro30ACardTable
OBJECT-TYPE
Contains information on Ethernet NTE Pro Rugged S Cards. These are supported on the FSP150CC GE101 Pro product.
1.3.6.1.4.1.2544.1.12.3.1.78not-accessiblecurrent
ethernetNTECX102Pro30ACardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTECX102Pro30ACardTable.
1.3.6.1.4.1.2544.1.12.3.1.78.1not-accessiblecurrent
ethernetNTECX102Pro30ACardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.1PhysicalIndexread-onlycurrent
ethernetNTECX102Pro30ACardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE101 Pro Card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.2AdminStateread-writecurrent
ethernetNTECX102Pro30ACardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE CX102Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.3OperationalStateread-onlycurrent
ethernetNTECX102Pro30ACardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE CX102Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.4SecondaryStateread-onlycurrent
ethernetNTECX102Pro30ACardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE CX102Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.5Integer32read-onlycurrent
ethernetNTECX102Pro30ACardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE CX102Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.6Integer32read-onlycurrent
ethernetNTECX102Pro30ACardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE CX102Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.7TruthValueread-writecurrent
ethernetNTECX102Pro30ACardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE CX102Pro30A card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.8RestartTyperead-writecurrent
ethernetNTECX102Pro30ACardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.78.1.9CmPmIntervalTyperead-writecurrent
ethernetNTECX102Pro30ACardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE CX102Pro30A card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.10VariablePointerread-createcurrent
ethernetNTECX102Pro30ACardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE CX102Pro30A card.
1.3.6.1.4.1.2544.1.12.3.1.78.1.11SwitchPortActionread-writecurrent
ge4PortCardTable
OBJECT-TYPE
A list of entries corresponding to GE 4 Port Expansion Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.79not-accessiblecurrent
ge4PortCardEntry
OBJECT-TYPE
A conceptual row in the ge4PortCardTable
1.3.6.1.4.1.2544.1.12.3.1.79.1not-accessiblecurrent
ge4PortCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.79.1.1PhysicalIndexread-onlycurrent
ge4PortCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.79.1.2AdminStateread-writecurrent
ge4PortCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.79.1.3OperationalStateread-onlycurrent
ge4PortCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.79.1.4SecondaryStateread-onlycurrent
ge4PortCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ge4PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ge4PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ge4PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.79.1.5RowStatusread-createcurrent
ge4PortCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.79.1.6DisplayString (SIZE(0..256))read-writecurrent
ge4PortCardTemperature
OBJECT-TYPE
Temperature of the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.79.1.7Integer32read-onlycurrent
ethernetNTEXG116PROCardTable
OBJECT-TYPE
Contains information on Ethernet NTE XG116PRO Card. These are supported on the FSP150CC XG116PRO product.
1.3.6.1.4.1.2544.1.12.3.1.80not-accessiblecurrent
ethernetNTEXG116PROCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEXG116PROCardTable.
1.3.6.1.4.1.2544.1.12.3.1.80.1not-accessiblecurrent
ethernetNTEXG116PROCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE XG116PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.80.1.1PhysicalIndexread-onlycurrent
ethernetNTEXG116PROCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE XG116PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.80.1.2AdminStateread-writecurrent
ethernetNTEXG116PROCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE XG116PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.80.1.3OperationalStateread-onlycurrent
ethernetNTEXG116PROCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE XG116PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.80.1.4SecondaryStateread-onlycurrent
ethernetNTEXG116PROCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE XG116PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.80.1.5Integer32read-onlycurrent
ethernetNTEXG116PROCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE XG116PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.80.1.6Integer32read-onlycurrent
ethernetNTEXG116PROCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG116PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.80.1.7TruthValueread-writecurrent
ethernetNTEXG116PROCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE XG116PRO card.
1.3.6.1.4.1.2544.1.12.3.1.80.1.8RestartTyperead-writecurrent
ethernetNTEXG116PROCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.80.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEXG120PROCardTable
OBJECT-TYPE
Contains information on Ethernet NTE XG120PRO Card. These are supported on the FSP150CC XG120PRO product.
1.3.6.1.4.1.2544.1.12.3.1.81not-accessiblecurrent
ethernetNTEXG120PROCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEXG120PROCardTable.
1.3.6.1.4.1.2544.1.12.3.1.81.1not-accessiblecurrent
ethernetNTEXG120PROCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE XG120PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.81.1.1PhysicalIndexread-onlycurrent
ethernetNTEXG120PROCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE XG120PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.81.1.2AdminStateread-writecurrent
ethernetNTEXG120PROCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE XG120PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.81.1.3OperationalStateread-onlycurrent
ethernetNTEXG120PROCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE XG120PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.81.1.4SecondaryStateread-onlycurrent
ethernetNTEXG120PROCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE XG120PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.81.1.5Integer32read-onlycurrent
ethernetNTEXG120PROCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE XG120PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.81.1.6Integer32read-onlycurrent
ethernetNTEXG120PROCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG120PRO Card.
1.3.6.1.4.1.2544.1.12.3.1.81.1.7TruthValueread-writecurrent
ethernetNTEXG120PROCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE XG120PRO card.
1.3.6.1.4.1.2544.1.12.3.1.81.1.8RestartTyperead-writecurrent
ethernetNTEXG120PROCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.81.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE112ProVmCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE112 Pro VM Cards. These are supported on the FSP150CC GE112 Pro VM product.
1.3.6.1.4.1.2544.1.12.3.1.82not-accessiblecurrent
ethernetNTEGE112ProVmCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE112ProVmCardTable.
1.3.6.1.4.1.2544.1.12.3.1.82.1not-accessiblecurrent
ethernetNTEGE112ProVmCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-CSH Card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE112ProVmCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114 Pro VM-CSH Card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.2AdminStateread-writecurrent
ethernetNTEGE112ProVmCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE112ProVm Card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.3OperationalStateread-onlycurrent
ethernetNTEGE112ProVmCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE112ProVm Card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.4SecondaryStateread-onlycurrent
ethernetNTEGE112ProVmCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE112ProVm Card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.5Integer32read-onlycurrent
ethernetNTEGE112ProVmCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE112ProVm Card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.6Integer32read-onlycurrent
ethernetNTEGE112ProVmCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProVm Card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.7TruthValueread-writecurrent
ethernetNTEGE112ProVmCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112ProVm card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.8RestartTyperead-writecurrent
ethernetNTEGE112ProVmCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.82.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE112ProVmCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE112ProVm card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.10VariablePointerread-createcurrent
ethernetNTEGE112ProVmCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE112ProVm card.
1.3.6.1.4.1.2544.1.12.3.1.82.1.11SwitchPortActionread-writecurrent
ethernetNTEOSA5401CardTable
OBJECT-TYPE
Contains information on Ethernet NTE OSA5401 Card. These are supported on the OSA5401 product.
1.3.6.1.4.1.2544.1.12.3.1.83not-accessiblecurrent
ethernetNTEOSA5401CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEOSA5401CardTable.
1.3.6.1.4.1.2544.1.12.3.1.83.1not-accessiblecurrent
ethernetNTEOSA5401CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE OSA5401 Card.
1.3.6.1.4.1.2544.1.12.3.1.83.1.1PhysicalIndexread-onlycurrent
ethernetNTEOSA5401CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE OSA5401 Card.
1.3.6.1.4.1.2544.1.12.3.1.83.1.2AdminStateread-writecurrent
ethernetNTEOSA5401CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE OSA5401 Card.
1.3.6.1.4.1.2544.1.12.3.1.83.1.3OperationalStateread-onlycurrent
ethernetNTEOSA5401CardTableRestartAction
OBJECT-TYPE
Allows to perform restart action on NTE OSA5401 Card.
1.3.6.1.4.1.2544.1.12.3.1.83.1.4RestartTyperead-writecurrent
ethernetNTEOSA5405CardTable
OBJECT-TYPE
Contains information on Ethernet NTE OSA5405 Card. These are supported on the OSA5405 product.
1.3.6.1.4.1.2544.1.12.3.1.84not-accessiblecurrent
ethernetNTEOSA5405CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEOSA5405CardTable.
1.3.6.1.4.1.2544.1.12.3.1.84.1not-accessiblecurrent
ethernetNTEOSA5405CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE OSA5405 Card.
1.3.6.1.4.1.2544.1.12.3.1.84.1.1PhysicalIndexread-onlycurrent
ethernetNTEOSA5405CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE OSA5405 Card.
1.3.6.1.4.1.2544.1.12.3.1.84.1.2AdminStateread-writecurrent
ethernetNTEOSA5405CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE OSA5405 Card.
1.3.6.1.4.1.2544.1.12.3.1.84.1.3OperationalStateread-onlycurrent
ethernetNTEOSA5405CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE OSA5405 Card in mV units.
1.3.6.1.4.1.2544.1.12.3.1.84.1.4Integer32read-onlycurrent
ethernetNTEOSA5405CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE OSA5405 Card.
1.3.6.1.4.1.2544.1.12.3.1.84.1.5Integer32read-onlycurrent
ethernetNTEOSA5405CardTableRestartAction
OBJECT-TYPE
Allows to perform restart action on NTE OSA5405 Card.
1.3.6.1.4.1.2544.1.12.3.1.84.1.6RestartTyperead-writecurrent
ethernetCSMCardTable
OBJECT-TYPE
Contains information on Ethernet CSM Card. These are supported on the OSA5430 and OSA5440 product.
1.3.6.1.4.1.2544.1.12.3.1.85not-accessiblecurrent
ethernetCSMCardEntry
OBJECT-TYPE
A conceptual row in the ethernetCSMCardTable.
1.3.6.1.4.1.2544.1.12.3.1.85.1not-accessiblecurrent
ethernetCSMCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE CSM Card.
1.3.6.1.4.1.2544.1.12.3.1.85.1.1PhysicalIndexread-onlycurrent
ethernetCSMCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE CSM Card.
1.3.6.1.4.1.2544.1.12.3.1.85.1.2AdminStateread-writecurrent
ethernetCSMCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE CSM Card.
1.3.6.1.4.1.2544.1.12.3.1.85.1.3OperationalStateread-onlycurrent
ethernetCSMCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE CSM Card.
1.3.6.1.4.1.2544.1.12.3.1.85.1.4SecondaryStateread-onlycurrent
ethernetCSMCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE CSM Card.
1.3.6.1.4.1.2544.1.12.3.1.85.1.5Integer32read-onlycurrent
ethernetCSMCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE CSM Card.
1.3.6.1.4.1.2544.1.12.3.1.85.1.6Integer32read-onlycurrent
ethernetCSMCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE CSM Card.
1.3.6.1.4.1.2544.1.12.3.1.85.1.7TruthValueread-writecurrent
ethernetCSMCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE CSM card.
1.3.6.1.4.1.2544.1.12.3.1.85.1.8RestartTyperead-writecurrent
ethernetCSMCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.85.1.9CmPmIntervalTyperead-writecurrent
ethernetCSMCardOscillatorType
OBJECT-TYPE
The mOscillatorType.
1.3.6.1.4.1.2544.1.12.3.1.85.1.10DisplayString (SIZE(0..16))read-onlycurrent
auxPortCardTable
OBJECT-TYPE
A list of entries corresponding to Auxiliary Port Expansion Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.87not-accessiblecurrent
auxPortCardEntry
OBJECT-TYPE
A conceptual row in the auxPortCardTable
1.3.6.1.4.1.2544.1.12.3.1.87.1not-accessiblecurrent
auxPortCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.87.1.1PhysicalIndexread-onlycurrent
auxPortCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the Auxiliary Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.87.1.2AdminStateread-writecurrent
auxPortCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the Auxiliary Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.87.1.3OperationalStateread-onlycurrent
auxPortCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the Auxiliary Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.87.1.4SecondaryStateread-onlycurrent
auxPortCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of auxPortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with auxPortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The auxPortCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.87.1.5RowStatusread-createcurrent
auxPortCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the Auxiliary Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.87.1.6DisplayString (SIZE(0..256))read-writecurrent
auxPortCardTemperature
OBJECT-TYPE
Temperature of the Auxiliary Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.87.1.7Integer32read-onlycurrent
ethernetNTEGE102ProHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE102 Pro H Cards. These are supported on the FSP150CC GE102 Pro H product.
1.3.6.1.4.1.2544.1.12.3.1.88not-accessiblecurrent
ethernetNTEGE102ProHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE102ProHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.88.1not-accessiblecurrent
ethernetNTEGE102ProHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE102 Pro H Card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE102ProHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE102 Pro H Card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.2AdminStateread-writecurrent
ethernetNTEGE102ProHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE102 Pro H Card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.3OperationalStateread-onlycurrent
ethernetNTEGE102ProHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE102 Pro H Card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.4SecondaryStateread-onlycurrent
ethernetNTEGE102ProHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE102 Pro H Card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.5Integer32read-onlycurrent
ethernetNTEGE102ProHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE102 Pro H Card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.6Integer32read-onlycurrent
ethernetNTEGE102ProHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE102 Pro H Card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.7TruthValueread-writecurrent
ethernetNTEGE102ProHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE102 Pro H card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.8RestartTyperead-writecurrent
ethernetNTEGE102ProHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.88.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE102ProHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE102 Pro H card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.10VariablePointerread-createcurrent
ethernetNTEGE102ProHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE102 Pro H card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.11SwitchPortActionread-writecurrent
ethernetNTEGE102ProHCardPSU1State
OBJECT-TYPE
Operational State of Power Supply Unit 1 on Ethernet NTE GE102Pro H card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.12OperationalStateread-onlycurrent
ethernetNTEGE102ProHCardPSU2State
OBJECT-TYPE
Operational State of Power Supply Unit 2 on Ethernet NTE GE102Pro H card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.13OperationalStateread-onlycurrent
ethernetNTEGE102ProHCardFAN1State
OBJECT-TYPE
Operational State of FAN 1 on Ethernet NTE GE102Pro H card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.14OperationalStateread-onlycurrent
ethernetNTEGE102ProHCardFAN2State
OBJECT-TYPE
Operational State of FAN 2 on Ethernet NTE GE102Pro H card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.15OperationalStateread-onlycurrent
ethernetNTEGE102ProHCardPsuType
OBJECT-TYPE
PSU Type on Ethernet NTE GE102Pro H card.
1.3.6.1.4.1.2544.1.12.3.1.88.1.16PsuTyperead-onlycurrent
ethernetNTEGE102ProEFMHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE102 Pro EFMH Cards. These are supported on the FSP150CC GE102 Pro EFMH product.
1.3.6.1.4.1.2544.1.12.3.1.89not-accessiblecurrent
ethernetNTEGE102ProEFMHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE102ProEFMHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.89.1not-accessiblecurrent
ethernetNTEGE102ProEFMHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE102 Pro EFMH Card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE102ProEFMHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE102 Pro EFMH Card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.2AdminStateread-writecurrent
ethernetNTEGE102ProEFMHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE102 Pro EFMH Card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.3OperationalStateread-onlycurrent
ethernetNTEGE102ProEFMHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE102 Pro EFMHCard.
1.3.6.1.4.1.2544.1.12.3.1.89.1.4SecondaryStateread-onlycurrent
ethernetNTEGE102ProEFMHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE102 Pro EFMH Card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.5Integer32read-onlycurrent
ethernetNTEGE102ProEFMHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE102 Pro EFMH Card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.6Integer32read-onlycurrent
ethernetNTEGE102ProEFMHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE102Pro EFMH card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.7RestartTyperead-writecurrent
ethernetNTEGE102ProEFMHCardPSU1State
OBJECT-TYPE
Operational State of Power Supply Unit 1 on Ethernet NTE GE102Pro EFMH card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.8OperationalStateread-onlycurrent
ethernetNTEGE102ProEFMHCardPSU2State
OBJECT-TYPE
Operational State of Power Supply Unit 2 on Ethernet NTE GE102Pro EFMH card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.9OperationalStateread-onlycurrent
ethernetNTEGE102ProEFMHCardFAN1State
OBJECT-TYPE
Operational State of FAN 1 on Ethernet NTE GE102Pro EFMH card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.10OperationalStateread-onlycurrent
ethernetNTEGE102ProEFMHCardFAN2State
OBJECT-TYPE
Operational State of FAN 2 on Ethernet NTE GE102Pro EFMH card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.11OperationalStateread-onlycurrent
ethernetNTEGE102ProEFMHCardPsuType
OBJECT-TYPE
PSU Type on Ethernet NTE GE102Pro EFMH card.
1.3.6.1.4.1.2544.1.12.3.1.89.1.12PsuTyperead-onlycurrent
ethernetNTEGE102ProEFMHCardLLFMode
OBJECT-TYPE
Current Link Loss Forwarding Mode on CPMR.
1.3.6.1.4.1.2544.1.12.3.1.89.1.13CmCPMRLinkLossFwdModeread-onlycurrent
ethernetNTEGE102ProEFMHCardLLFModeAction
OBJECT-TYPE
Operation to set the appropriate mode on CPMR.
1.3.6.1.4.1.2544.1.12.3.1.89.1.14CmCPMRLinkLossFwdModeread-writecurrent
ethernetOsa3350MgntCardTable
OBJECT-TYPE
Contains information on Ethernet Osa3350 Mgnt Cards.
1.3.6.1.4.1.2544.1.12.3.1.90not-accessiblecurrent
ethernetOsa3350MgntCardEntry
OBJECT-TYPE
A conceptual row in the ethernetOsa3350MgntCardTable.
1.3.6.1.4.1.2544.1.12.3.1.90.1not-accessiblecurrent
ethernetOsa3350MgntCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet Osa3350 Mgnt Card.
1.3.6.1.4.1.2544.1.12.3.1.90.1.1PhysicalIndexread-onlycurrent
ethernetOsa3350MgntCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet Osa3350 Mgnt Card.
1.3.6.1.4.1.2544.1.12.3.1.90.1.2AdminStateread-writecurrent
ethernetOsa3350MgntCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet Osa3350 Mgnt Card.
1.3.6.1.4.1.2544.1.12.3.1.90.1.3OperationalStateread-onlycurrent
ethernetOsa3350MgntCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet Osa3350 Mgnt Card.
1.3.6.1.4.1.2544.1.12.3.1.90.1.4SecondaryStateread-onlycurrent
ethernetOsa3350MgntCardRestartAction
OBJECT-TYPE
Allows to perform specified restart action on the Ethernet Osa3350 Mgnt card.
1.3.6.1.4.1.2544.1.12.3.1.90.1.5RestartTyperead-writecurrent
ethernetOsa3350MgntCardResyncAction
OBJECT-TYPE
Allows to perform specified resync action on the Ethernet Osa3350 Mgnt card.
1.3.6.1.4.1.2544.1.12.3.1.90.1.6ResyncTyperead-writecurrent
ethernetNTEXG116PROHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE XG116PRO (H) Card. These are supported on the FSP150CC XG116PRO (H) product.
1.3.6.1.4.1.2544.1.12.3.1.91not-accessiblecurrent
ethernetNTEXG116PROHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEXG116PROHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.91.1not-accessiblecurrent
ethernetNTEXG116PROHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE XG116PRO (H) Card.
1.3.6.1.4.1.2544.1.12.3.1.91.1.1PhysicalIndexread-onlycurrent
ethernetNTEXG116PROHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE XG116PRO (H) Card.
1.3.6.1.4.1.2544.1.12.3.1.91.1.2AdminStateread-writecurrent
ethernetNTEXG116PROHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE XG116PRO (H) Card.
1.3.6.1.4.1.2544.1.12.3.1.91.1.3OperationalStateread-onlycurrent
ethernetNTEXG116PROHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE XG116PRO (H) Card.
1.3.6.1.4.1.2544.1.12.3.1.91.1.4SecondaryStateread-onlycurrent
ethernetNTEXG116PROHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE XG116PRO (H) Card.
1.3.6.1.4.1.2544.1.12.3.1.91.1.5Integer32read-onlycurrent
ethernetNTEXG116PROHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE XG116PRO (H) Card.
1.3.6.1.4.1.2544.1.12.3.1.91.1.6Integer32read-onlycurrent
ethernetNTEXG116PROHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG116PRO (H) Card.
1.3.6.1.4.1.2544.1.12.3.1.91.1.7TruthValueread-writecurrent
ethernetNTEXG116PROHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE XG116PRO (H) card.
1.3.6.1.4.1.2544.1.12.3.1.91.1.8RestartTyperead-writecurrent
ethernetNTEXG116PROHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.91.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGO102ProSMCardTable
OBJECT-TYPE
Contains information on Ethernet NTE Pro GO102Pro-S Mini Cards. These are supported on the FSP150CC GO102Pro-S Mini product.
1.3.6.1.4.1.2544.1.12.3.1.92not-accessiblecurrent
ethernetNTEGO102ProSMCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGO102ProSMCardTable.
1.3.6.1.4.1.2544.1.12.3.1.92.1not-accessiblecurrent
ethernetNTEGO102ProSMCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GO102Pro-SM Card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.1PhysicalIndexread-onlycurrent
ethernetNTEGO102ProSMCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GO102Pro-SM Card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.2AdminStateread-writecurrent
ethernetNTEGO102ProSMCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GO102Pro-SM Card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.3OperationalStateread-onlycurrent
ethernetNTEGO102ProSMCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GO102Pro-SM Card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.4SecondaryStateread-onlycurrent
ethernetNTEGO102ProSMCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GO102Pro-SM Card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.5Integer32read-onlycurrent
ethernetNTEGO102ProSMCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GO102Pro-SM Card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.6Integer32read-onlycurrent
ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GO102Pro-SM Card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.7TruthValueread-writecurrent
ethernetNTEGO102ProSMCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GO102Pro-SM card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.8RestartTyperead-writecurrent
ethernetNTEGO102ProSMCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.92.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGO102ProSMCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GO102Pro-SM card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.10VariablePointerread-createcurrent
ethernetNTEGO102ProSMCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GO102Pro-SM card.
1.3.6.1.4.1.2544.1.12.3.1.92.1.11SwitchPortActionread-writecurrent
ethernetNTEXG118PROSHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE XG118PRO (SH) Card. These are supported on the FSP150CC XG118PRO (SH) product.
1.3.6.1.4.1.2544.1.12.3.1.93not-accessiblecurrent
ethernetNTEXG118PROSHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEXG118PROSHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.93.1not-accessiblecurrent
ethernetNTEXG118PROSHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE XG118PRO (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.93.1.1PhysicalIndexread-onlycurrent
ethernetNTEXG118PROSHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE XG118PRO (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.93.1.2AdminStateread-writecurrent
ethernetNTEXG118PROSHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE XG118PRO (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.93.1.3OperationalStateread-onlycurrent
ethernetNTEXG118PROSHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE XG118PRO (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.93.1.4SecondaryStateread-onlycurrent
ethernetNTEXG118PROSHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE XG118PRO (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.93.1.5Integer32read-onlycurrent
ethernetNTEXG118PROSHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE XG118PRO (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.93.1.6Integer32read-onlycurrent
ethernetNTEXG118PROSHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG118PRO (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.93.1.7TruthValueread-writecurrent
ethernetNTEXG118PROSHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE XG118PRO (SH) card.
1.3.6.1.4.1.2544.1.12.3.1.93.1.8RestartTyperead-writecurrent
ethernetNTEXG118PROSHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.93.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEXG118PROACSHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE XG118PROAC (SH) Card. These are supported on the FSP150CC XG118PROAC (SH) product.
1.3.6.1.4.1.2544.1.12.3.1.94not-accessiblecurrent
ethernetNTEXG118PROACSHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEXG118PROACSHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.94.1not-accessiblecurrent
ethernetNTEXG118PROACSHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE XG118PROAC (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.94.1.1PhysicalIndexread-onlycurrent
ethernetNTEXG118PROACSHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE XG118PROAC (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.94.1.2AdminStateread-writecurrent
ethernetNTEXG118PROACSHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE XG118PROAC (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.94.1.3OperationalStateread-onlycurrent
ethernetNTEXG118PROACSHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE XG118PROAC (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.94.1.4SecondaryStateread-onlycurrent
ethernetNTEXG118PROACSHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE XG118PROAC (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.94.1.5Integer32read-onlycurrent
ethernetNTEXG118PROACSHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE XG118PROAC (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.94.1.6Integer32read-onlycurrent
ethernetNTEXG118PROACSHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG118PROAC (SH) Card.
1.3.6.1.4.1.2544.1.12.3.1.94.1.7TruthValueread-writecurrent
ethernetNTEXG118PROACSHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE XG118PROAC (SH) card.
1.3.6.1.4.1.2544.1.12.3.1.94.1.8RestartTyperead-writecurrent
ethernetNTEXG118PROACSHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.94.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProVmSHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE114 Pro VM-CH Cards. These are supported on the FSP150CC GE114 Pro VM-CH product.
1.3.6.1.4.1.2544.1.12.3.1.95not-accessiblecurrent
ethernetNTEGE114ProVmSHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE114ProVmSHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.95.1not-accessiblecurrent
ethernetNTEGE114ProVmSHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-CH Card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE114ProVmSHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE114 Pro VM-CH Card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.2AdminStateread-writecurrent
ethernetNTEGE114ProVmSHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE114ProVmSH Card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.3OperationalStateread-onlycurrent
ethernetNTEGE114ProVmSHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE114ProVmSH Card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.4SecondaryStateread-onlycurrent
ethernetNTEGE114ProVmSHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE114ProVmSH Card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.5Integer32read-onlycurrent
ethernetNTEGE114ProVmSHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE114ProVmSH Card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.6Integer32read-onlycurrent
ethernetNTEGE114ProVmSHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProVmSH Card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.7TruthValueread-writecurrent
ethernetNTEGE114ProVmSHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProVmSH card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.8RestartTyperead-writecurrent
ethernetNTEGE114ProVmSHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.95.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE114ProVmSHCardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE114ProVmSH card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.10VariablePointerread-createcurrent
ethernetNTEGE114ProVmSHCardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE114ProVmSH card.
1.3.6.1.4.1.2544.1.12.3.1.95.1.11SwitchPortActionread-writecurrent
ethernetNTEGE104CardTable
OBJECT-TYPE
Contains information on Ethernet NTE GE104 Cards. These are supported on the FSP150CC GE104 product.
1.3.6.1.4.1.2544.1.12.3.1.96not-accessiblecurrent
ethernetNTEGE104CardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEGE104CardTable.
1.3.6.1.4.1.2544.1.12.3.1.96.1not-accessiblecurrent
ethernetNTEGE104CardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE GE104 Card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.1PhysicalIndexread-onlycurrent
ethernetNTEGE104CardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE GE104 Card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.2AdminStateread-writecurrent
ethernetNTEGE104CardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE GE104 Card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.3OperationalStateread-onlycurrent
ethernetNTEGE104CardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE GE104 Card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.4SecondaryStateread-onlycurrent
ethernetNTEGE104CardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE GE102 Card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.5Integer32read-onlycurrent
ethernetNTEGE104CardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE GE104 Card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.6Integer32read-onlycurrent
ethernetNTEGE104CardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE104 Card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.7TruthValueread-writecurrent
ethernetNTEGE104CardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE104 card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.8RestartTyperead-writecurrent
ethernetNTEGE104CardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.96.1.9CmPmIntervalTyperead-writecurrent
ethernetNTEGE104CardSwitchPortActionPort
OBJECT-TYPE
Which port to perform specified switch action on the Ethernet NTE GE104 card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.10VariablePointerread-createcurrent
ethernetNTEGE104CardSwitchPortAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE GE104 card.
1.3.6.1.4.1.2544.1.12.3.1.96.1.11SwitchPortActionread-writecurrent
ethernetNTEXG120PROSHCardTable
OBJECT-TYPE
Contains information on Ethernet NTE XG120PROSH Card. These are supported on the FSP150CC XG120PROSH product.
1.3.6.1.4.1.2544.1.12.3.1.97not-accessiblecurrent
ethernetNTEXG120PROSHCardEntry
OBJECT-TYPE
A conceptual row in the ethernetNTEXG120PROSHCardTable.
1.3.6.1.4.1.2544.1.12.3.1.97.1not-accessiblecurrent
ethernetNTEXG120PROSHCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for the Ethernet NTE XG120PROSH Card.
1.3.6.1.4.1.2544.1.12.3.1.97.1.1PhysicalIndexread-onlycurrent
ethernetNTEXG120PROSHCardAdminState
OBJECT-TYPE
Administrative State of the Ethernet NTE XG120PROSH Card.
1.3.6.1.4.1.2544.1.12.3.1.97.1.2AdminStateread-writecurrent
ethernetNTEXG120PROSHCardOperationalState
OBJECT-TYPE
Operational State of the Ethernet NTE XG120PROSH Card.
1.3.6.1.4.1.2544.1.12.3.1.97.1.3OperationalStateread-onlycurrent
ethernetNTEXG120PROSHCardSecondaryState
OBJECT-TYPE
Secondary State of the Ethernet NTE XG120PROSH Card.
1.3.6.1.4.1.2544.1.12.3.1.97.1.4SecondaryStateread-onlycurrent
ethernetNTEXG120PROSHCardVoltage
OBJECT-TYPE
Voltage of the Ethernet NTE XG120PROSH Card.
1.3.6.1.4.1.2544.1.12.3.1.97.1.5Integer32read-onlycurrent
ethernetNTEXG120PROSHCardTemperature
OBJECT-TYPE
Temperature of the Ethernet NTE XG120PROSH Card.
1.3.6.1.4.1.2544.1.12.3.1.97.1.6Integer32read-onlycurrent
ethernetNTEXG120PROSHCardSnmpDyingGaspEnabled
OBJECT-TYPE
Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG120PROSH Card.
1.3.6.1.4.1.2544.1.12.3.1.97.1.7TruthValueread-writecurrent
ethernetNTEXG120PROSHCardRestartAction
OBJECT-TYPE
Allows to perform specified action on the Ethernet NTE XG120PROSH card.
1.3.6.1.4.1.2544.1.12.3.1.97.1.8RestartTyperead-writecurrent
ethernetNTEXG120PROSHCardFineGrainedPmInterval
OBJECT-TYPE
Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals.
1.3.6.1.4.1.2544.1.12.3.1.97.1.9CmPmIntervalTyperead-writecurrent
mbGnssCardTable
OBJECT-TYPE
A list of entries corresponding to MB GNSS Expansion Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.98not-accessiblecurrent
mbGnssCardEntry
OBJECT-TYPE
A conceptual row in the mbGnssCardTable
1.3.6.1.4.1.2544.1.12.3.1.98.1not-accessiblecurrent
mbGnssCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.98.1.1PhysicalIndexread-onlycurrent
mbGnssCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.98.1.2AdminStateread-writecurrent
mbGnssCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.98.1.3OperationalStateread-onlycurrent
mbGnssCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.98.1.4SecondaryStateread-onlycurrent
mbGnssCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of mbGnssCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with mbGnssCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The mbGnssCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.98.1.5RowStatusread-createcurrent
mbGnssCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the MB GNSS Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.98.1.6DisplayString (SIZE(0..256))read-writecurrent
f3IrigCardTable
OBJECT-TYPE
A list of entries corresponding to IRIG Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.99not-accessiblecurrent
f3IrigCardEntry
OBJECT-TYPE
A conceptual row in the f3IrigCardTable
1.3.6.1.4.1.2544.1.12.3.1.99.1not-accessiblecurrent
f3IrigCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.99.1.1PhysicalIndexread-onlycurrent
f3IrigCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.99.1.2DisplayString (SIZE(0..256))read-writecurrent
f3IrigCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.99.1.3AdminStateread-writecurrent
f3IrigCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.99.1.4OperationalStateread-onlycurrent
f3IrigCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.99.1.5SecondaryStateread-onlycurrent
f3IrigCardTemperature
OBJECT-TYPE
Temperature of the GE 4 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.99.1.6Integer32read-onlycurrent
f3IrigCardStorageType
OBJECT-TYPE
Storage Type of the IRIG Card.
1.3.6.1.4.1.2544.1.12.3.1.99.1.7StorageTyperead-createcurrent
f3IrigCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3IrigCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3IrigCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3IrigCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.99.1.8RowStatusread-createcurrent
compositeClockCardTable
OBJECT-TYPE
A list of entries corresponding to Composite Clock Expansion Card Facilities for configuration purposes.
1.3.6.1.4.1.2544.1.12.3.1.100not-accessiblecurrent
compositeClockCardEntry
OBJECT-TYPE
A conceptual row in the compositeClockCardTable
1.3.6.1.4.1.2544.1.12.3.1.100.1not-accessiblecurrent
compositeClockCardEntityIndex
OBJECT-TYPE
Entity Index from ENTITY-MIB for this card
1.3.6.1.4.1.2544.1.12.3.1.100.1.1PhysicalIndexread-onlycurrent
compositeClockCardAdminState
OBJECT-TYPE
This object represents the Administrative State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.100.1.2AdminStateread-writecurrent
compositeClockCardOperationalState
OBJECT-TYPE
This object represents the Operational State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.100.1.3OperationalStateread-onlycurrent
compositeClockCardSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the BITS 16 Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.100.1.4SecondaryStateread-onlycurrent
compositeClockCardRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of compositeClockCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with compositeClockCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The compositeClockCardRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.3.1.100.1.5RowStatusread-createcurrent
compositeClockCardAlias
OBJECT-TYPE
This object allows SNMP management entities to provide an alias to the COMPOSITE CLOCK Expansion Card.
1.3.6.1.4.1.2544.1.12.3.1.100.1.6DisplayString (SIZE(0..256))read-writecurrent
f3StorageDeviceTable
OBJECT-TYPE
Contains information on storage devices within the server card.
1.3.6.1.4.1.2544.1.12.3.1.101not-accessiblecurrent
f3StorageDeviceEntry
OBJECT-TYPE
A conceptual row in the f3StorageDeviceTable.
1.3.6.1.4.1.2544.1.12.3.1.101.1not-accessiblecurrent
f3StorageDeviceInternalSsdHealth
OBJECT-TYPE
Indicates health of internal SSD on server card.
1.3.6.1.4.1.2544.1.12.3.1.101.1.1TruthValueread-onlycurrent
f3StorageDeviceExternalSsdStatus
OBJECT-TYPE
Indicates status of external SSD on server card.
1.3.6.1.4.1.2544.1.12.3.1.101.1.2StorageStatusread-onlycurrent
f3StorageDeviceWearoutLevel
OBJECT-TYPE
Indicated wearout level of internal SSD on server card.
1.3.6.1.4.1.2544.1.12.3.1.101.1.3Integer32read-onlycurrent
cmEntityConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.3.2
cmEntityCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.3.2.1
cmEntityGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.3.2.2

Conformance

NameOIDStatus
cmEntityCompliance
MODULE-COMPLIANCE
Describes the requirements for conformance to the CM Entity group.
1.3.6.1.4.1.2544.1.12.3.2.1.1current
cmEntityObjectGroup
OBJECT-GROUP
*************** THIS OBJECT GROUP IS DEPRECATED ****************** A collection of objects used to manage the CM Entity group.
1.3.6.1.4.1.2544.1.12.3.2.2.1deprecated
commonEntityGroup
OBJECT-GROUP
A collection of common objects used to manage any F3 product family product.
1.3.6.1.4.1.2544.1.12.3.2.2.2current
psuGroup
OBJECT-GROUP
A collection of objects used to manage the F3 Power Supply units.
1.3.6.1.4.1.2544.1.12.3.2.2.3current
fanGroup
OBJECT-GROUP
A collection of objects used to manage the F3 Fan units.
1.3.6.1.4.1.2544.1.12.3.2.2.4current
hubshelfGroup
OBJECT-GROUP
A collection of objects used to manage the CM Hub Shelf entities.
1.3.6.1.4.1.2544.1.12.3.2.2.5current
nteGe206CardGroup
OBJECT-GROUP
A collection of objects used to manage the GE206 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.6current
nteGe201SyncECardGroup
OBJECT-GROUP
A collection of objects used to manage the GE201 Sync Ethernet Card.
1.3.6.1.4.1.2544.1.12.3.2.2.7current
nteGe201NonSyncECardGroup
OBJECT-GROUP
A collection of objects used to manage the GE201 Non SyncE Card.
1.3.6.1.4.1.2544.1.12.3.2.2.8current
nteGe206FCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE206F Card.
1.3.6.1.4.1.2544.1.12.3.2.2.9current
nteGe112CardGroup
OBJECT-GROUP
A collection of objects used to manage the GE112 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.10current
nteGe114CardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.11current
nteGe206VCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE206V Card.
1.3.6.1.4.1.2544.1.12.3.2.2.12current
nteXg210CardGroup
OBJECT-GROUP
A collection of objects used to manage the XG210 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.13current
pseudoWireCardOcnStmCardGroup
OBJECT-GROUP
A collection of objects used to manage the Pseudo Wire OCN/STM Card.
1.3.6.1.4.1.2544.1.12.3.2.2.14current
pseudoWireCardE1T1CardGroup
OBJECT-GROUP
A collection of objects used to manage the Pseudo Wire E1/T1 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.15current
nteT1804CardGroup
OBJECT-GROUP
A collection of objects used to manage the T1804 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.16current
nteT3204CardGroup
OBJECT-GROUP
A collection of objects used to manage the T3204 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.17current
nteGeSyncProbeCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE SyncProbe Card.
1.3.6.1.4.1.2544.1.12.3.2.2.18current
xg1XCCCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG 1X CC Card.
1.3.6.1.4.1.2544.1.12.3.2.2.19current
xg1SCCCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG 1S CC Card.
1.3.6.1.4.1.2544.1.12.3.2.2.20current
ge4ECCCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE 4E CC Card.
1.3.6.1.4.1.2544.1.12.3.2.2.21current
ge4SCCCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE 4S CC Card.
1.3.6.1.4.1.2544.1.12.3.2.2.22current
ge8SCCCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE 8S CC Card.
1.3.6.1.4.1.2544.1.12.3.2.2.23current
nteGe114HCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114H Card.
1.3.6.1.4.1.2544.1.12.3.2.2.24current
nteGe114PHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114PH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.25current
ethernetOverOCSTMCardGroup
OBJECT-GROUP
A collection of objects used to manage the cards.
1.3.6.1.4.1.2544.1.12.3.2.2.26current
ethernet1x10GHighPerCardGroup
OBJECT-GROUP
A collection of objects used to manage the cards.
1.3.6.1.4.1.2544.1.12.3.2.2.27current
ethernetFE36ECardGroup
OBJECT-GROUP
A collection of objects used to manage the cards.
1.3.6.1.4.1.2544.1.12.3.2.2.28current
nteGe114SHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114SH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.29current
nteGe114SCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114S Card.
1.3.6.1.4.1.2544.1.12.3.2.2.30current
ge8ECCCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE 8E CC Card.
1.3.6.1.4.1.2544.1.12.3.2.2.31current
neLLDPParamsGroup
OBJECT-GROUP
A collection of objects used to manage the LLDP params on NE.
1.3.6.1.4.1.2544.1.12.3.2.2.32current
nteSh1PcsCardGroup
OBJECT-GROUP
A collection of objects used to manage the SH1PCS Card.
1.3.6.1.4.1.2544.1.12.3.2.2.33current
nteOsa5411CardGroup
OBJECT-GROUP
A collection of objects used to manage the OSA5411 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.34current
nteGe112ProCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE112Pro Card.
1.3.6.1.4.1.2544.1.12.3.2.2.35current
nteGe112ProMCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE112ProM Card.
1.3.6.1.4.1.2544.1.12.3.2.2.36current
nteGe114ProCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114Pro Card.
1.3.6.1.4.1.2544.1.12.3.2.2.37current
nteGe114ProCCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114ProC Card.
1.3.6.1.4.1.2544.1.12.3.2.2.38current
nteGe114ProSHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114ProSH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.39current
nteGe114ProCSHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114ProCSH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.40current
nteGe114ProHECardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114ProHE Card.
1.3.6.1.4.1.2544.1.12.3.2.2.41current
nteGe112ProHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE112ProH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.42current
nteXg210CCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG210 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.43current
geGE8SCryptoConnectorCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE 8S CC Card.
1.3.6.1.4.1.2544.1.12.3.2.2.44current
nteOsa5420CardGroup
OBJECT-GROUP
A collection of objects used to manage the OSA5420 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.45current
nteOsa5421CardGroup
OBJECT-GROUP
A collection of objects used to manage the OSA5421 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.46current
nteGe114GCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114G Card.
1.3.6.1.4.1.2544.1.12.3.2.2.47current
bits16PortCardGroup
OBJECT-GROUP
A collection of objects used to manage the BITS 16 PORT EXP Card.
1.3.6.1.4.1.2544.1.12.3.2.2.48current
nteGE114ProVmHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114ProVmH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.49current
nteGE114ProVmCHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114ProVmCH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.50current
nteGE114ProVmCSHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114ProVmCSH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.51current
serverCardGroup
OBJECT-GROUP
A collection of objects used to manage the Server Card.
1.3.6.1.4.1.2544.1.12.3.2.2.52current
pps16PortCardGroup
OBJECT-GROUP
A collection of objects used to manage the PPS 16 PORT EXP Card.
1.3.6.1.4.1.2544.1.12.3.2.2.53current
clk16PortCardGroup
OBJECT-GROUP
A collection of objects used to manage the PPS 16 PORT EXP Card.
1.3.6.1.4.1.2544.1.12.3.2.2.54current
todPps16PortCardGroup
OBJECT-GROUP
A collection of objects used to manage the PPS 16 PORT EXP Card.
1.3.6.1.4.1.2544.1.12.3.2.2.55current
nteGe101ProCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE101Pro Card.
1.3.6.1.4.1.2544.1.12.3.2.2.56current
nteGo102ProSCardGroup
OBJECT-GROUP
A collection of objects used to manage the GO102ProS Card.
1.3.6.1.4.1.2544.1.12.3.2.2.57current
nteGo102ProSPCardGroup
OBJECT-GROUP
A collection of objects used to manage the GO102ProSP Card.
1.3.6.1.4.1.2544.1.12.3.2.2.58current
nteCx101Pro30ACardGroup
OBJECT-GROUP
A collection of objects used to manage the CX101Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.2.2.59current
nteCx102Pro30ACardGroup
OBJECT-GROUP
A collection of objects used to manage the CX102Pro30A Card.
1.3.6.1.4.1.2544.1.12.3.2.2.60current
ge4PortCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE 4 PORT EXP Card.
1.3.6.1.4.1.2544.1.12.3.2.2.61current
nteXg116ProCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG116PRO Card.
1.3.6.1.4.1.2544.1.12.3.2.2.62current
nteXg120ProCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG120PRO Card.
1.3.6.1.4.1.2544.1.12.3.2.2.63current
nteGE112ProVmCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE112ProVm Card.
1.3.6.1.4.1.2544.1.12.3.2.2.64current
nteOsa5401CardGroup
OBJECT-GROUP
A collection of objects used to manage the OSA5401 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.65current
nteOsa5405CardGroup
OBJECT-GROUP
A collection of objects used to manage the OSA5405 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.66current
csmCardGroup
OBJECT-GROUP
A collection of objects used to manage the CSM Card.
1.3.6.1.4.1.2544.1.12.3.2.2.67current
auxPortCardGroup
OBJECT-GROUP
A collection of objects used to manage the Auxiliary Port Expansion Card.
1.3.6.1.4.1.2544.1.12.3.2.2.68current
nteGe102ProHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE102Pro H Card.
1.3.6.1.4.1.2544.1.12.3.2.2.69current
nteGe102ProEFMHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE102Pro EFMH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.70current
ethernetOsa3350MgntCardGroup
OBJECT-GROUP
A collection of objects used to manage the OSA3350 Mgnt Card.
1.3.6.1.4.1.2544.1.12.3.2.2.71current
nteXg116ProHCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG116PRO (H) Card.
1.3.6.1.4.1.2544.1.12.3.2.2.72current
nteGo102ProSMCardGroup
OBJECT-GROUP
A collection of objects used to manage the GO102ProSM Card.
1.3.6.1.4.1.2544.1.12.3.2.2.73current
nteXg118ProSHCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG118PRO (SH) Card.
1.3.6.1.4.1.2544.1.12.3.2.2.74current
nteXg118ProacSHCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG118PROAC (SH) Card.
1.3.6.1.4.1.2544.1.12.3.2.2.75current
nteGE114ProVmSHCardGroup
OBJECT-GROUP
A collection of objects used to manage the GE114ProVmSH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.76current
nteGE104CardGroup
OBJECT-GROUP
A collection of objects used to manage the GE104 Card.
1.3.6.1.4.1.2544.1.12.3.2.2.77current
nteXg120ProSHCardGroup
OBJECT-GROUP
A collection of objects used to manage the XG120PROSH Card.
1.3.6.1.4.1.2544.1.12.3.2.2.78current
mbGnssCardGroup
OBJECT-GROUP
A collection of objects used to manage the MB GNSS EXP Card.
1.3.6.1.4.1.2544.1.12.3.2.2.79current
f3IrigCardGroup
OBJECT-GROUP
A collection of objects used to manage the IRIG Card.
1.3.6.1.4.1.2544.1.12.3.2.2.80current
compositeClockCardGroup
OBJECT-GROUP
A collection of objects used to manage the COMPOSITE CLOCK EXP Card.
1.3.6.1.4.1.2544.1.12.3.2.2.81current