MIBs Depot

CM-ALARM-MIB

Registered at
1.3.6.1.4.1.2544.1.12.6
Last updated
2020-03-01 00:00
Organization
ADVA Optical Networking SE
Revisions
2020-03-01 00:00
Namespace
adva
Source file
CM-ALARM-MIB
Digest
sha256:e7fa60d108abdfbc6dc9e7bcadf6ce05268e12be6f5a44b22d9ee816f23410de

Description

This module defines the Alarm Monitoring MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.

Contact

Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199

Imports

FromSymbols
ADVA-MIBTrapAlarmSeverity, fsp150cm
CM-ENTITY-MIBneIndex, shelfIndex, slotIndex
CM-FACILITY-MIBcmEthernetAccPortIndex, cmEthernetNetPortIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue, VariablePointer

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADVA-MIB
CM-ALARM-MIB
CM-COMMON-MIB
CM-ENTITY-MIB
CM-FACILITY-MIB
CM-REDUNDANCY-MIB
CM-SYSTEM-MIB
ENTITY-MIB
F3-LAG-MIB
F3-SYNC-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
IPV6-TC
LLDP-V2-MIB
LLDP-V2-TC-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-TARGET-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
CmAlarmEntityType
TEXTUAL-CONVENTION
Identifies the type of alarm entity types.
current
CmCondEffectType
TEXTUAL-CONVENTION
Identifies the type of condition effect types.
current
CmConditionDescr
TEXTUAL-CONVENTION
A detailed text description of the condition or alarm being reported. This string may contain any printable ASCII character.
current
CmConditionType
TEXTUAL-CONVENTION
Identifies the type of condition or alarm being reported.
current
CmDirection
TEXTUAL-CONVENTION
Specifies the direction associated with the particular information.
current
CmLocation
TEXTUAL-CONVENTION
Identifies the location associated with the particular information.
current
CmServiceEffect
TEXTUAL-CONVENTION
Indicates whether a condition is service affecting or not.
current
EnvAlarmInputMode
TEXTUAL-CONVENTION
Identifies the environmental alarm input modes.
current
TestAlarmAction
TEXTUAL-CONVENTION
Whether to raise/clear a test alarm.
current

Objects

NameOIDSyntaxAccessStatus
alarmObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.6.1
cmAlarmScalars
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.6.1.1
cmAlmLastChange
OBJECT-TYPE
A snapshot of the value of sysUpTime when the alarm situation last changed on the node (ie. there was a raise or clear). This value is reset to zero when the agent initializes.
1.3.6.1.4.1.2544.1.12.6.1.1.1TimeStampread-onlycurrent
cmAlmIndex
OBJECT-TYPE
This value is assigned globally and sequentially to each new trap that is sent from the device. When this value reaches a maximum of 65535, it is wrapped to the value 1.
1.3.6.1.4.1.2544.1.12.6.1.1.2Integer32 (1..65535)read-onlycurrent
cmAlmTestAlarmEntity
OBJECT-TYPE
This object is used to specify the entity for which the test alarm is raised/cleared. This entity can be OID of a card(unit) or a port (Ethernet Access or Ethernet Network). The test alarm is the trap cmNetworkElementAlmTrap with condition type as testalarm. If not specified, the value of this object is 0.0.
1.3.6.1.4.1.2544.1.12.6.1.1.3VariablePointerread-writecurrent
cmAlmTestAlarmAction
OBJECT-TYPE
This object can be used to raise/clear the testalarm on the entity specified by cmAlmTestAlarmEntity.
1.3.6.1.4.1.2544.1.12.6.1.1.4TestAlarmActionread-writecurrent
cmSysAlmTable
OBJECT-TYPE
A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
1.3.6.1.4.1.2544.1.12.6.1.2not-accessiblecurrent
cmSysAlmEntry
OBJECT-TYPE
An entry containing information applicable to a particular condition.
1.3.6.1.4.1.2544.1.12.6.1.2.1not-accessiblecurrent
cmSysAlmNotifCode
OBJECT-TYPE
This object identifies the severity of the condition.
1.3.6.1.4.1.2544.1.12.6.1.2.1.1TrapAlarmSeverityread-onlycurrent
cmSysAlmType
OBJECT-TYPE
This object identifies the type of the condition.
1.3.6.1.4.1.2544.1.12.6.1.2.1.2CmConditionTyperead-onlycurrent
cmSysAlmSrvEff
OBJECT-TYPE
This object identifies whether the condition is service affecting or not.
1.3.6.1.4.1.2544.1.12.6.1.2.1.3CmServiceEffectread-onlycurrent
cmSysAlmTime
OBJECT-TYPE
This object contains the system time when the condition occurred.
1.3.6.1.4.1.2544.1.12.6.1.2.1.4DateAndTimeread-onlycurrent
cmSysAlmLocation
OBJECT-TYPE
This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.2.1.5CmLocationread-onlycurrent
cmSysAlmDirection
OBJECT-TYPE
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.2.1.6CmDirectionread-onlycurrent
cmSysAlmDescr
OBJECT-TYPE
This object contains a text description of the condition.
1.3.6.1.4.1.2544.1.12.6.1.2.1.7CmConditionDescrread-onlycurrent
cmSysAlmObject
OBJECT-TYPE
OID of the actual object that raised the alarm.
1.3.6.1.4.1.2544.1.12.6.1.2.1.8VariablePointerread-onlycurrent
cmSysAlmObjectName
OBJECT-TYPE
Symbolic name of the managed object to which the condition pertains.
1.3.6.1.4.1.2544.1.12.6.1.2.1.9DisplayStringread-onlycurrent
cmSysAlmAdditionalInfoObject
OBJECT-TYPE
This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
1.3.6.1.4.1.2544.1.12.6.1.2.1.10VariablePointerread-onlycurrent
cmSysAlmAdditionalInfoName
OBJECT-TYPE
This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
1.3.6.1.4.1.2544.1.12.6.1.2.1.11DisplayString (SIZE(0..64))read-onlycurrent
cmSysCondTable
OBJECT-TYPE
A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
1.3.6.1.4.1.2544.1.12.6.1.3not-accessiblecurrent
cmSysCondEntry
OBJECT-TYPE
An entry containing information applicable to a particular condition.
1.3.6.1.4.1.2544.1.12.6.1.3.1not-accessiblecurrent
cmSysCondIndex
OBJECT-TYPE
An integer index value used to uniquely identify a standing condition at the system level.
1.3.6.1.4.1.2544.1.12.6.1.3.1.1Integer32 (1..65535)read-onlycurrent
cmSysCondNotifCode
OBJECT-TYPE
This object identifies the severity of the condition.
1.3.6.1.4.1.2544.1.12.6.1.3.1.2TrapAlarmSeverityread-onlycurrent
cmSysCondType
OBJECT-TYPE
This object identifies the type of the condition.
1.3.6.1.4.1.2544.1.12.6.1.3.1.3CmConditionTyperead-onlycurrent
cmSysCondSrvEff
OBJECT-TYPE
This object identifies whether the condition is service affecting or not.
1.3.6.1.4.1.2544.1.12.6.1.3.1.4CmServiceEffectread-onlycurrent
cmSysCondTime
OBJECT-TYPE
This object contains the system time when the condition occurred.
1.3.6.1.4.1.2544.1.12.6.1.3.1.5DateAndTimeread-onlycurrent
cmSysCondLocation
OBJECT-TYPE
This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.3.1.6CmLocationread-onlycurrent
cmSysCondDirection
OBJECT-TYPE
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.3.1.7CmDirectionread-onlycurrent
cmSysCondDescr
OBJECT-TYPE
This object contains a text description of the condition.
1.3.6.1.4.1.2544.1.12.6.1.3.1.8CmConditionDescrread-onlycurrent
cmSysCondEffType
OBJECT-TYPE
This object contains the condition effect type.
1.3.6.1.4.1.2544.1.12.6.1.3.1.9CmCondEffectTyperead-onlycurrent
cmSysCondObject
OBJECT-TYPE
OID of the actual object that raised the condition.
1.3.6.1.4.1.2544.1.12.6.1.3.1.10VariablePointerread-onlycurrent
cmSysCondObjectName
OBJECT-TYPE
Symbolic name of the managed object to which the condition pertains.
1.3.6.1.4.1.2544.1.12.6.1.3.1.11DisplayStringread-onlycurrent
cmSysCondAdditionalInfoObject
OBJECT-TYPE
This object provides OID of associated entity that caused the condition. If there is no associated entity, this value is 0.0.
1.3.6.1.4.1.2544.1.12.6.1.3.1.12VariablePointerread-onlycurrent
cmSysCondAdditionalInfoName
OBJECT-TYPE
This object provides name of the associated entity to which the condition pertains. If there is no such entity, this value is empty.
1.3.6.1.4.1.2544.1.12.6.1.3.1.13DisplayString (SIZE(0..256))read-onlycurrent
cmNetworkElementAlmTable
OBJECT-TYPE
A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
1.3.6.1.4.1.2544.1.12.6.1.4not-accessiblecurrent
cmNetworkElementAlmEntry
OBJECT-TYPE
An entry containing information applicable to a particular condition.
1.3.6.1.4.1.2544.1.12.6.1.4.1not-accessiblecurrent
cmNetworkElementAlmNotifCode
OBJECT-TYPE
This object identifies the severity of the condition.
1.3.6.1.4.1.2544.1.12.6.1.4.1.1TrapAlarmSeverityread-onlycurrent
cmNetworkElementAlmType
OBJECT-TYPE
This object identifies the type of the condition.
1.3.6.1.4.1.2544.1.12.6.1.4.1.2CmConditionTyperead-onlycurrent
cmNetworkElementAlmSrvEff
OBJECT-TYPE
This object identifies whether the condition is service affecting or not.
1.3.6.1.4.1.2544.1.12.6.1.4.1.3CmServiceEffectread-onlycurrent
cmNetworkElementAlmTime
OBJECT-TYPE
This object contains the system time when the condition occurred.
1.3.6.1.4.1.2544.1.12.6.1.4.1.4DateAndTimeread-onlycurrent
cmNetworkElementAlmLocation
OBJECT-TYPE
This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.4.1.5CmLocationread-onlycurrent
cmNetworkElementAlmDirection
OBJECT-TYPE
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.4.1.6CmDirectionread-onlycurrent
cmNetworkElementAlmDescr
OBJECT-TYPE
This object contains a text description of the condition.
1.3.6.1.4.1.2544.1.12.6.1.4.1.7CmConditionDescrread-onlycurrent
cmNetworkElementAlmObject
OBJECT-TYPE
OID of the actual object that raised the alarm.
1.3.6.1.4.1.2544.1.12.6.1.4.1.8VariablePointerread-onlycurrent
cmNetworkElementAlmObjectName
OBJECT-TYPE
Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
1.3.6.1.4.1.2544.1.12.6.1.4.1.9DisplayStringread-onlycurrent
cmNetworkElementAlmAdditionalInfoObject
OBJECT-TYPE
This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
1.3.6.1.4.1.2544.1.12.6.1.4.1.10VariablePointerread-onlycurrent
cmNetworkElementAlmAdditionalInfoName
OBJECT-TYPE
This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
1.3.6.1.4.1.2544.1.12.6.1.4.1.11DisplayString (SIZE(0..64))read-onlycurrent
cmNetworkElementCondTable
OBJECT-TYPE
A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
1.3.6.1.4.1.2544.1.12.6.1.5not-accessiblecurrent
cmNetworkElementCondEntry
OBJECT-TYPE
An entry containing information applicable to a particular condition.
1.3.6.1.4.1.2544.1.12.6.1.5.1not-accessiblecurrent
cmNetworkElementCondIndex
OBJECT-TYPE
An integer index value used to uniquely identify a standing condition at a Network Element level.
1.3.6.1.4.1.2544.1.12.6.1.5.1.1Integer32 (1..65535)read-onlycurrent
cmNetworkElementCondNotifCode
OBJECT-TYPE
This object identifies the severity of the condition.
1.3.6.1.4.1.2544.1.12.6.1.5.1.2TrapAlarmSeverityread-onlycurrent
cmNetworkElementCondType
OBJECT-TYPE
This object identifies the type of the condition.
1.3.6.1.4.1.2544.1.12.6.1.5.1.3CmConditionTyperead-onlycurrent
cmNetworkElementCondSrvEff
OBJECT-TYPE
This object identifies whether the condition is service affecting or not.
1.3.6.1.4.1.2544.1.12.6.1.5.1.4CmServiceEffectread-onlycurrent
cmNetworkElementCondTime
OBJECT-TYPE
This object contains the system time when the condition occurred.
1.3.6.1.4.1.2544.1.12.6.1.5.1.5DateAndTimeread-onlycurrent
cmNetworkElementCondLocation
OBJECT-TYPE
This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.5.1.6CmLocationread-onlycurrent
cmNetworkElementCondDirection
OBJECT-TYPE
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.5.1.7CmDirectionread-onlycurrent
cmNetworkElementCondDescr
OBJECT-TYPE
This object contains a text description of the condition.
1.3.6.1.4.1.2544.1.12.6.1.5.1.8CmConditionDescrread-onlycurrent
cmNetworkElementCondObject
OBJECT-TYPE
Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
1.3.6.1.4.1.2544.1.12.6.1.5.1.9VariablePointerread-onlycurrent
cmNetworkElementCondObjectName
OBJECT-TYPE
Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
1.3.6.1.4.1.2544.1.12.6.1.5.1.10DisplayStringread-onlycurrent
cmNetworkElementCondEffType
OBJECT-TYPE
This object contains the condition effect type.
1.3.6.1.4.1.2544.1.12.6.1.5.1.11CmCondEffectTyperead-onlycurrent
cmNetworkElementCondAdditionalInfoObject
OBJECT-TYPE
This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
1.3.6.1.4.1.2544.1.12.6.1.5.1.12VariablePointerread-onlycurrent
cmNetworkElementCondAdditionalInfoName
OBJECT-TYPE
This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
1.3.6.1.4.1.2544.1.12.6.1.5.1.13DisplayString (SIZE(0..64))read-onlycurrent
cmAlarmSeverityAssignmentTable
OBJECT-TYPE
A list of configurable alarm severity assignment entries for Enterprise MIB Alarm Conditions.
1.3.6.1.4.1.2544.1.12.6.1.6not-accessiblecurrent
cmAlarmSeverityAssignmentEntry
OBJECT-TYPE
A list of parameters that set up the alarm severity assignment profiles.
1.3.6.1.4.1.2544.1.12.6.1.6.1not-accessiblecurrent
cmAlarmSeverityAssignmentEntityType
OBJECT-TYPE
Alarm Severity Assignment Entity Type.
1.3.6.1.4.1.2544.1.12.6.1.6.1.1CmAlarmEntityTyperead-onlycurrent
cmAlarmSeverityAssignmentCondType
OBJECT-TYPE
This object identifies the type of the condition.
1.3.6.1.4.1.2544.1.12.6.1.6.1.2CmConditionTyperead-onlycurrent
cmAlarmSeverityAssignmentSrvEff
OBJECT-TYPE
This object identifies whether the condition is service affecting or not.
1.3.6.1.4.1.2544.1.12.6.1.6.1.3CmServiceEffectread-onlycurrent
cmAlarmSeverityAssignmentLocation
OBJECT-TYPE
This object identifies the location of the condition. The value none(0) is used if location is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.6.1.4CmLocationread-onlycurrent
cmAlarmSeverityAssignmentNotifCode
OBJECT-TYPE
This object allows configuration of the severity of the condition.
1.3.6.1.4.1.2544.1.12.6.1.6.1.5TrapAlarmSeverityread-writecurrent
cmAlarmSeverityAssignmentDirection
OBJECT-TYPE
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
1.3.6.1.4.1.2544.1.12.6.1.6.1.6CmDirectionread-onlycurrent
f3EnvAlarmInputTable
OBJECT-TYPE
A list of configurable Environmental Alarm Inputs.
1.3.6.1.4.1.2544.1.12.6.1.7not-accessiblecurrent
f3EnvAlarmInputEntry
OBJECT-TYPE
A list of parameters to manage the the environmental alarm inputs.
1.3.6.1.4.1.2544.1.12.6.1.7.1not-accessiblecurrent
f3EnvAlarmInputIndex
OBJECT-TYPE
Unique index for each environmental alarm input.
1.3.6.1.4.1.2544.1.12.6.1.7.1.1Integer32not-accessiblecurrent
f3EnvAlarmInputDescr
OBJECT-TYPE
This object allows SNMP management entities to provide description to the environmental alarm inputs.
1.3.6.1.4.1.2544.1.12.6.1.7.1.2DisplayString (SIZE(0..64))read-writecurrent
f3EnvAlarmInputCondType
OBJECT-TYPE
This object allows SNMP management entities to provide the environmental alarm condition associated with the environmental alarm input.
1.3.6.1.4.1.2544.1.12.6.1.7.1.3CmConditionTyperead-writecurrent
f3EnvAlarmInputNotifCode
OBJECT-TYPE
This object allows SNMP management entities to provide the notification code for the environmental alarm input.
1.3.6.1.4.1.2544.1.12.6.1.7.1.4TrapAlarmSeverityread-writecurrent
f3EnvAlarmInputMode
OBJECT-TYPE
This object allows specification of the environmental alarm input mode. When 'disabled', environmental alarms are not raised. Value of 'alarmopen' allows alarm to be raised when environmental alarm dry contacts are opened. Value of 'alarmclosed' allows alarm to be raised when environmental alarm dry contacts are closed.
1.3.6.1.4.1.2544.1.12.6.1.7.1.5EnvAlarmInputModeread-writecurrent
f3EnvAlarmInputAlmHoldOffEnabled
OBJECT-TYPE
This object allows enabling/disabling of alarm hold off for this environmental alarm. When 'disabled', the standard alarm hold off (2.5seconds) does not hold, i.e. alarms are raised immediately when conditions happen.
1.3.6.1.4.1.2544.1.12.6.1.7.1.6TruthValueread-writecurrent
alarmNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.6.2
alarmConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.6.3
cmAlmCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.6.3.1
cmAlmGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.6.3.2

Notifications

NameOIDStatus
cmSysAlmTrap
NOTIFICATION-TYPE
This trap is sent each time an alarm condition is raised and inserted into to the cmSysAlmTable. It is also sent each time an alarm condition is cleared and removed from the cmSysAlmTable.
1.3.6.1.4.1.2544.1.12.6.2.1current
cmNetworkElementAlmTrap
NOTIFICATION-TYPE
This trap is sent each time an alarm condition is raised and inserted into to the cmNetworkElementAlmTable. It is also sent each time an alarm condition is cleared and removed from the cmNetworkElementAlmTable.
1.3.6.1.4.1.2544.1.12.6.2.2current
cmSysEvent
NOTIFICATION-TYPE
This trap is sent each time an event condition is raised and inserted into to the cmSysCondTable. It is also sent each time an event condition is cleared and removed from the cmSysCondTable. Standing conditions/transient conditions are reported using this notification.
1.3.6.1.4.1.2544.1.12.6.2.3current
cmNetworkElementEvent
NOTIFICATION-TYPE
This trap is sent each time an event condition is raised and inserted into to the cmNetworkElementCondTable. It is also sent each time an event condition is cleared and removed from the cmNetworkElementCondTable. Standing conditions/transient conditions are reported using this notification.
1.3.6.1.4.1.2544.1.12.6.2.4current

Conformance

NameOIDStatus
cmAlmCompliance
MODULE-COMPLIANCE
Describes the requirements for conformance to the Alarm Condition Services.
1.3.6.1.4.1.2544.1.12.6.3.1.1current
cmAlmObjectGroup
OBJECT-GROUP
A collection of objects used to manage the Alarm conditions/threshold Services.
1.3.6.1.4.1.2544.1.12.6.3.2.1current
cmAlmNotifGroup
NOTIFICATION-GROUP
A collection of notifications related to alarm conditions/threshold Services.
1.3.6.1.4.1.2544.1.12.6.3.2.2current
f3EnvAlarmInputGroup
OBJECT-GROUP
A collection of objects related to environmental alarm inputs.
1.3.6.1.4.1.2544.1.12.6.3.2.3current