MIBs Depot

F3-FPM-MIB

Registered at
1.3.6.1.4.1.2544.1.12.43
Last updated
2016-07-11 00:00
Organization
ADVA Optical Networking
Revisions
2016-07-11 00:00
Namespace
adva
Source file
F3-FPM-MIB
Digest
sha256:630e34e09902933cc59f9c239e4b0d1d0dd6fa2b8ba02d877bc9b1b53f241aeb

Description

This module defines the Flow Point Model MIB definitions used by the F3 product lines. Copyright (C) ADVA Optical Networking.

Contact

Jakub Nadolski ADVA Optical Networking, Inc. Tel: +48 58 7716 421 E-mail: jnadolski@advaoptical.com Postal: ul. Slaska 35 81-310 Gdynia, Poland

Imports

FromSymbols
ADVA-MIBfsp150cm
CM-COMMON-MIBAdminState, CmPmBinAction, CmPmIntervalType, FlowSecState, OperationalState, PerfCounter64, SecondaryState, VlanId, VlanPriority
CM-ENTITY-MIBneIndex, shelfIndex, slotIndex
CM-FACILITY-MIBCmActiveControlProtocolsType, CmControlProtocolDispType, FlowTagControl, FlowVlanActionType, PolicerAlgorithmType, PolicerColorMode, ShapingType, cmEthernetAccPortIndex, cmEthernetNetPortIndex, cmMPFlowEntry, cmMPFlowIndex
F3-BRIDGE-MIBFlowLearningConfigAction, LearningAction, ProtectLearningControl
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADVA-MIB
BRIDGE-MIB
CM-COMMON-MIB
CM-ENTITY-MIB
CM-FACILITY-MIB
CM-PERFORMANCE-MIB
CM-REDUNDANCY-MIB
CM-SYSTEM-MIB
ENTITY-MIB
F3-BRIDGE-MIB
F3-FPM-MIB
F3-LAG-MIB
F3-SYNC-MIB
HCNUM-TC
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IEEE8023-LAG-MIB
IF-MIB
IPV6-TC
LLDP-V2-MIB
LLDP-V2-TC-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-TARGET-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB
UUID-TC-MIB

Objects

NameOIDSyntaxAccessStatus
f3FpmConfigObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.43.1
f3AccFlowPointTable
OBJECT-TYPE
A list of entries corresponding to Access Flow Point for configuration purposes.
1.3.6.1.4.1.2544.1.12.43.1.1not-accessiblecurrent
f3AccFlowPointEntry
OBJECT-TYPE
A conceptual row in the f3AccFlowPointTable. These entries represent an Access Flow Point. If the Flow Point attached to a lag, the slotIndex should be 255 (255 is used to identify the Flow Point belongs to lag), and the cmEthernetAccPortIndex should be the f3LagIndex.
1.3.6.1.4.1.2544.1.12.43.1.1.1not-accessiblecurrent
f3AccFlowPointIndex
OBJECT-TYPE
The integer index value corresponding to an Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.1.1.1Integer32 (1..65535)not-accessiblecurrent
f3AccFlowPointAlias
OBJECT-TYPE
This object allows SNMP management entities to provide a circuit identifier with the Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.1.1.2DisplayString (SIZE(0..64))read-createcurrent
f3AccFlowPointAdminState
OBJECT-TYPE
This object represents the Administrative State of the Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.1.1.3AdminStateread-createcurrent
f3AccFlowPointOperationalState
OBJECT-TYPE
This object represents the Operational State of the Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.1.1.4OperationalStateread-onlycurrent
f3AccFlowPointSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.1.1.5SecondaryStateread-onlycurrent
f3AccFlowPointAssociatedFlowId
OBJECT-TYPE
This object provides the association of an Flow with an Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.1.1.6VariablePointerread-onlycurrent
f3AccFlowPointIngressMultiCOSEnabled
OBJECT-TYPE
This object allows specification of ingress multiple COS (Class of Service) Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.1.1.7TruthValueread-createcurrent
f3AccFlowPointIngressCOS
OBJECT-TYPE
This object allows specification of ingress COS (Class of Service) Flow Point. This attribute has been deprecated and is not supported. The Ingress COS is determined from the flowpoint's associated Priority Mapping Profle.
1.3.6.1.4.1.2544.1.12.43.1.1.1.8Integer32read-createdeprecated
f3AccFlowPointEgressShapingType
OBJECT-TYPE
This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
1.3.6.1.4.1.2544.1.12.43.1.1.1.9ShapingTyperead-writecurrent
f3AccFlowPointIngressVlanMemberList
OBJECT-TYPE
It allows specification of VLAN members of the Flow Point. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the Flow Point is created, this attribute can only be updated using f3AccFlowPointVlanMemberAction and f3AccFlowPointVlanMemberActionVlan objects.
1.3.6.1.4.1.2544.1.12.43.1.1.1.10DisplayString (SIZE(0..512))read-createcurrent
f3AccFlowPointVlanMemberAction
OBJECT-TYPE
This object allows to add or remove the VLAN members specified by f3AccFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object f3AccFlowPointVlanMemberActionVlan and then should specify f3AccFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
1.3.6.1.4.1.2544.1.12.43.1.1.1.11FlowVlanActionTyperead-writecurrent
f3AccFlowPointVlanMemberActionVlan
OBJECT-TYPE
This object allows adding/removing VLAN members to a Flow Point. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke f3AccFlowPointVlanMemberAction.
1.3.6.1.4.1.2544.1.12.43.1.1.1.12DisplayString (SIZE(0..16))read-createcurrent
f3AccFlowPointIngressUntaggedFrameEnabled
OBJECT-TYPE
This object allows to specify whether or not the Flow Point supports untagged frame.
1.3.6.1.4.1.2544.1.12.43.1.1.1.13TruthValueread-createcurrent
f3AccFlowPointCTagControl
OBJECT-TYPE
This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3AccFlowPointCTagVlanId) and priority (f3AccFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3AccFlowPointCTagVlanId and f3AccFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3AccFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
1.3.6.1.4.1.2544.1.12.43.1.1.1.14FlowTagControlread-createcurrent
f3AccFlowPointCTagVlanId
OBJECT-TYPE
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
1.3.6.1.4.1.2544.1.12.43.1.1.1.15VlanIdread-createcurrent
f3AccFlowPointCTagVlanPriority
OBJECT-TYPE
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
1.3.6.1.4.1.2544.1.12.43.1.1.1.16VlanPriorityread-createcurrent
f3AccFlowPointSTagControl
OBJECT-TYPE
This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3AccFlowPointSTagVlanId) and priority (f3AccFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3AccFlowPointSTagVlanId and f3AccFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3AccFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
1.3.6.1.4.1.2544.1.12.43.1.1.1.17FlowTagControlread-createcurrent
f3AccFlowPointSTagVlanId
OBJECT-TYPE
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3AccFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
1.3.6.1.4.1.2544.1.12.43.1.1.1.18VlanIdread-createcurrent
f3AccFlowPointSTagVlanPriority
OBJECT-TYPE
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3AccFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
1.3.6.1.4.1.2544.1.12.43.1.1.1.19VlanPriorityread-createcurrent
f3AccFlowPointEgressOuterTagPrioMapEnabled
OBJECT-TYPE
This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
1.3.6.1.4.1.2544.1.12.43.1.1.1.20TruthValueread-createcurrent
f3AccFlowPointEgressInnerTagPrioMapEnabled
OBJECT-TYPE
This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
1.3.6.1.4.1.2544.1.12.43.1.1.1.21TruthValueread-createcurrent
f3AccFlowPointSESFramesLossThresholdRatio
OBJECT-TYPE
This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA functionality.
1.3.6.1.4.1.2544.1.12.43.1.1.1.22Integer32 (0..100)read-createcurrent
f3AccFlowPointDefaultMemberEnabled
OBJECT-TYPE
Truth Value means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.
1.3.6.1.4.1.2544.1.12.43.1.1.1.23TruthValueread-createcurrent
f3AccFlowPointMcastRateLimitEnabled
OBJECT-TYPE
Whether multicast packets need be limited per FP.
1.3.6.1.4.1.2544.1.12.43.1.1.1.24TruthValueread-createcurrent
f3AccFlowPointMcastRateLimitSpeedLo
OBJECT-TYPE
The rate limiting for multicast packets per FP. When f3AccFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.25Unsigned32read-createcurrent
f3AccFlowPointMcastRateLimitSpeedHi
OBJECT-TYPE
The rate limiting for multicast packets per FP. When f3AccFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.26Unsigned32read-createcurrent
f3AccFlowPointBcastRateLimitEnabled
OBJECT-TYPE
Whether broadcast packets need be limited per FP.
1.3.6.1.4.1.2544.1.12.43.1.1.1.27TruthValueread-createcurrent
f3AccFlowPointBcastRateLimitSpeedLo
OBJECT-TYPE
The rate limiting for broadcast packets per FP. When f3AccFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.28Unsigned32read-createcurrent
f3AccFlowPointBcastRateLimitSpeedHi
OBJECT-TYPE
The rate limiting for broadcast packets per FP. When f3AccFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.29Unsigned32read-createcurrent
f3AccFlowPointCombinedRateLimitEnabled
OBJECT-TYPE
Whether broadcast and multicast packets need be limited per FP.
1.3.6.1.4.1.2544.1.12.43.1.1.1.30TruthValueread-createcurrent
f3AccFlowPointCombinedRateLimitSpeedLo
OBJECT-TYPE
The rate limiting for broadcast and multicast packets per FP. When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.31Unsigned32read-createcurrent
f3AccFlowPointCombinedRateLimitSpeedHi
OBJECT-TYPE
The rate limiting for broadcast and multicast packets per FP. When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.32Unsigned32read-createcurrent
f3AccFlowPointSplitHorizonGroupOID
OBJECT-TYPE
Specifies the Split-Horizon Group OID. If there is no SHG, the value is none.
1.3.6.1.4.1.2544.1.12.43.1.1.1.33VariablePointerread-createcurrent
f3AccFlowPointLoopAvoidance
OBJECT-TYPE
EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
1.3.6.1.4.1.2544.1.12.43.1.1.1.34VariablePointerread-createcurrent
f3AccFlowPointHierarchicalCOSEnabled
OBJECT-TYPE
Enable or Disable Hierarchical COS shaping (flow shaping).
1.3.6.1.4.1.2544.1.12.43.1.1.1.35TruthValueread-createcurrent
f3AccFlowPointMaximumBWLo
OBJECT-TYPE
This attribute description the Flow Point maximum bandwidth. This object only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.36Unsigned32read-createcurrent
f3AccFlowPointMaximumBWHi
OBJECT-TYPE
This attribute description the Flow Point maximum bandwidth. This object only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.37Unsigned32read-createcurrent
f3AccFlowPointGuaranteedBWLo
OBJECT-TYPE
This attribute description the Flow Point guaranteed bandwidth. This object only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.38Unsigned32read-createcurrent
f3AccFlowPointGuaranteedBWHi
OBJECT-TYPE
This attribute description the Flow Point guaranteed bandwidth. This objects only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.1.1.39Unsigned32read-createcurrent
f3AccFlowPointAutoBandwidthConfigEnabled
OBJECT-TYPE
This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available port bandwidth multiplied by the value of the f3AccFlowPointAutoCIRPercentage object. For a Hierarchical-COS Flow Point, the f3AccFlowPointMaximumBWLo and f3AccFlowPointMaximumBWHi are set to the maximum port bandwidth; the f3AccFlowPointGuaranteedBWLo and f3AccFlowPointGuaranteedBWHi are set to the available port bandwidth multiplied by the value of the f3AccFlowPointAutoCIRPercentage object. The value of this object must be FALSE when f3AccFlowPointIngressMultiCOSEnabled is TRUE and f3AccFlowPointHierarchicalCOSEnabled is FALSE.
1.3.6.1.4.1.2544.1.12.43.1.1.1.40TruthValueread-createcurrent
f3AccFlowPointAutoCIRPercentage
OBJECT-TYPE
This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when f3AccFlowPointAutoBandwidthConfigEnabled is TRUE.
1.3.6.1.4.1.2544.1.12.43.1.1.1.41Integer32 (0..100)read-createcurrent
f3AccFlowPointFrameFwdEnabled
OBJECT-TYPE
When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
1.3.6.1.4.1.2544.1.12.43.1.1.1.42TruthValueread-createcurrent
f3AccFlowPointStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.43.1.1.1.43StorageTyperead-createcurrent
f3AccFlowPointRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AccFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AccFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AccFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.43.1.1.1.44RowStatusread-createcurrent
f3AccFlowPointUsePortPrioMapProfile
OBJECT-TYPE
This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
1.3.6.1.4.1.2544.1.12.43.1.1.1.45TruthValueread-writecurrent
f3AccFlowPointRefPrioMapProfile
OBJECT-TYPE
This object allows to set priority map profile.
1.3.6.1.4.1.2544.1.12.43.1.1.1.46VariablePointerread-writecurrent
f3AccFlowpointRefConnectGuardFlowObject
OBJECT-TYPE
This object specifies Mac Sec flow object OID.
1.3.6.1.4.1.2544.1.12.43.1.1.1.47VariablePointerread-writecurrent
f3AccFlowpointSecureBlockingControl
OBJECT-TYPE
This object can be used to enable/disable secure block.
1.3.6.1.4.1.2544.1.12.43.1.1.1.48TruthValueread-writecurrent
f3AccFlowpointSecureState
OBJECT-TYPE
This object specifies the secure state of this flow.
1.3.6.1.4.1.2544.1.12.43.1.1.1.49FlowSecStateread-onlycurrent
f3AccFpQosShaperTable
OBJECT-TYPE
A list of entries corresponding to Access Flow Point Quality of Service Shaper for configuration purposes.
1.3.6.1.4.1.2544.1.12.43.1.2not-accessiblecurrent
f3AccFpQosShaperEntry
OBJECT-TYPE
A conceptual row in the f3AccFpQosShaperTable. These entries represent an Access Flow Point Quality of Service Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1not-accessiblecurrent
f3AccFpQosShaperIndex
OBJECT-TYPE
The unique integer index value corresponding to a Quality of Service Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.1Integer32 (1..8)not-accessiblecurrent
f3AccFpQosShaperAdminState
OBJECT-TYPE
This object represents the Administrative State of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.2AdminStateread-createcurrent
f3AccFpQosShaperOperationalState
OBJECT-TYPE
This object represents the Operational State of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.3OperationalStateread-onlycurrent
f3AccFpQosShaperSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.4SecondaryStateread-onlycurrent
f3AccFpQosShaperCIRLo
OBJECT-TYPE
This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.5Unsigned32read-createcurrent
f3AccFpQosShaperCIRHi
OBJECT-TYPE
This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.6Unsigned32read-createcurrent
f3AccFpQosShaperEIRLo
OBJECT-TYPE
This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.7Unsigned32read-createcurrent
f3AccFpQosShaperEIRHi
OBJECT-TYPE
This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.8Unsigned32read-createcurrent
f3AccFpQosShaperCBS
OBJECT-TYPE
This object represents the Commited Burst Size (CBS) of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.9Unsigned32read-createcurrent
f3AccFpQosShaperEBS
OBJECT-TYPE
This object represents the Excess Burst Size (EBS) of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.10Unsigned32read-createcurrent
f3AccFpQosShaperBufferSize
OBJECT-TYPE
This object represents the Buffer Size of the Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.11Unsigned32read-createcurrent
f3AccFpQosShaperCOS
OBJECT-TYPE
This object provides the COS (Class of Service) value for the QOS Shaper.
1.3.6.1.4.1.2544.1.12.43.1.2.1.12Integer32 (0..7)read-onlycurrent
f3AccFpQosShaperStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.43.1.2.1.13StorageTyperead-createcurrent
f3AccFpQosShaperRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AccFpQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AccFpQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AccFpQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.43.1.2.1.14RowStatusread-createcurrent
f3AccFpQosPolicerTable
OBJECT-TYPE
A list of entries corresponding to Access Flow Point Quality of Service Policer for configuration purposes.
1.3.6.1.4.1.2544.1.12.43.1.3not-accessiblecurrent
f3AccFpQosPolicerEntry
OBJECT-TYPE
A conceptual row in the f3AccFpQosPolicerTable. These entries represent an Access Flow Point Quality of Service Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1not-accessiblecurrent
f3AccFpQosPolicerIndex
OBJECT-TYPE
The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
1.3.6.1.4.1.2544.1.12.43.1.3.1.1Integer32 (1..8)not-accessiblecurrent
f3AccFpQosPolicerAdminState
OBJECT-TYPE
This object represents the Administrative State of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.2AdminStateread-createcurrent
f3AccFpQosPolicerOperationalState
OBJECT-TYPE
This object represents the Operational State of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.3OperationalStateread-onlycurrent
f3AccFpQosPolicerSecondaryState
OBJECT-TYPE
This object represents the Secondary State of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.4SecondaryStateread-onlycurrent
f3AccFpQosPolicerCIRLo
OBJECT-TYPE
This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.5Unsigned32read-createcurrent
f3AccFpQosPolicerCIRHi
OBJECT-TYPE
This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.6Unsigned32read-createcurrent
f3AccFpQosPolicerEIRLo
OBJECT-TYPE
This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.7Unsigned32read-createcurrent
f3AccFpQosPolicerEIRHi
OBJECT-TYPE
This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.8Unsigned32read-createcurrent
f3AccFpQosPolicerCBS
OBJECT-TYPE
This object represents the Commited Burst Size (CBS) of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.9Integer32read-createcurrent
f3AccFpQosPolicerEBS
OBJECT-TYPE
This object represents the Excess Burst Size (EBS) of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.3.1.10Integer32read-createcurrent
f3AccFpQosPolicerAlgorithm
OBJECT-TYPE
This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
1.3.6.1.4.1.2544.1.12.43.1.3.1.11PolicerAlgorithmTyperead-onlycurrent
f3AccFpQosPolicerColorMode
OBJECT-TYPE
This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
1.3.6.1.4.1.2544.1.12.43.1.3.1.12PolicerColorModeread-createcurrent
f3AccFpQosPolicerCouplingFlag
OBJECT-TYPE
This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
1.3.6.1.4.1.2544.1.12.43.1.3.1.13TruthValueread-createcurrent
f3AccFpQosPolicerPolicingEnabled
OBJECT-TYPE
This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.
1.3.6.1.4.1.2544.1.12.43.1.3.1.14TruthValueread-createcurrent
f3AccFpQosPolicerStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.43.1.3.1.15StorageTyperead-createcurrent
f3AccFpQosPolicerRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AccFpQosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AccFpQosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AccFpQosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.43.1.3.1.16RowStatusread-createcurrent
f3MPFlowExtTable
OBJECT-TYPE
This table extends cmMPFlowTable to provide configuration of maximum forwarding table size.
1.3.6.1.4.1.2544.1.12.43.1.4not-accessiblecurrent
f3MPFlowExtEntry
OBJECT-TYPE
A conceptual row in the f3MPFlowExtTable.
1.3.6.1.4.1.2544.1.12.43.1.4.1not-accessiblecurrent
f3MPFlowExtMaxFwdEntries
OBJECT-TYPE
This object allows configuring the maximum number of Forwarding Entires for Forwarding Table of this MP Flow.
1.3.6.1.4.1.2544.1.12.43.1.4.1.1Integer32read-writecurrent
f3MPFlowRefConnectGuardFlowObject
OBJECT-TYPE
This object specifies Mac Sec flow object OID.
1.3.6.1.4.1.2544.1.12.43.1.4.1.2VariablePointerread-writecurrent
f3MPFlowSecureState
OBJECT-TYPE
This object specifies the secure state of the macsec flow.
1.3.6.1.4.1.2544.1.12.43.1.4.1.3FlowSecStateread-onlycurrent
f3AccFlowPointCpdV2Table
OBJECT-TYPE
A list of entries corresponding to Access Flow Point Control Protocol Disposition V2.
1.3.6.1.4.1.2544.1.12.43.1.5not-accessiblecurrent
f3AccFlowPointCpdV2Entry
OBJECT-TYPE
A conceptual row in the f3AccFlowPointCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Access Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.5.1not-accessiblecurrent
f3AccFlowPointCpdV2Index
OBJECT-TYPE
Unique Index value to access the CPD row.
1.3.6.1.4.1.2544.1.12.43.1.5.1.1Integer32not-accessiblecurrent
f3AccFlowPointCpdV2IslDispType
OBJECT-TYPE
Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
1.3.6.1.4.1.2544.1.12.43.1.5.1.2CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2PagpDispType
OBJECT-TYPE
Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
1.3.6.1.4.1.2544.1.12.43.1.5.1.3CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2UdldDispType
OBJECT-TYPE
Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
1.3.6.1.4.1.2544.1.12.43.1.5.1.4CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2CdpDispType
OBJECT-TYPE
Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
1.3.6.1.4.1.2544.1.12.43.1.5.1.5CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2VtpDispType
OBJECT-TYPE
Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
1.3.6.1.4.1.2544.1.12.43.1.5.1.6CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2DtpDispType
OBJECT-TYPE
Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
1.3.6.1.4.1.2544.1.12.43.1.5.1.7CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2PvstpPlusDispType
OBJECT-TYPE
Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
1.3.6.1.4.1.2544.1.12.43.1.5.1.8CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2UplinkFastDispType
OBJECT-TYPE
Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
1.3.6.1.4.1.2544.1.12.43.1.5.1.9CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2VlanBridgeDispType
OBJECT-TYPE
Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
1.3.6.1.4.1.2544.1.12.43.1.5.1.10CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2L2PTDispType
OBJECT-TYPE
Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
1.3.6.1.4.1.2544.1.12.43.1.5.1.11CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2BPDUDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
1.3.6.1.4.1.2544.1.12.43.1.5.1.12CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2PauseDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
1.3.6.1.4.1.2544.1.12.43.1.5.1.13CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2LACPDispType
OBJECT-TYPE
Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
1.3.6.1.4.1.2544.1.12.43.1.5.1.14CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2LACPMarkerDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
1.3.6.1.4.1.2544.1.12.43.1.5.1.15CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2EfmOamDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
1.3.6.1.4.1.2544.1.12.43.1.5.1.16CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2SSMDispType
OBJECT-TYPE
Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
1.3.6.1.4.1.2544.1.12.43.1.5.1.17CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2PortAuthenDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
1.3.6.1.4.1.2544.1.12.43.1.5.1.18CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2LANBridgesDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
1.3.6.1.4.1.2544.1.12.43.1.5.1.19CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2GMRPDispType
OBJECT-TYPE
Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
1.3.6.1.4.1.2544.1.12.43.1.5.1.20CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2GVRPDispType
OBJECT-TYPE
Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
1.3.6.1.4.1.2544.1.12.43.1.5.1.21CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2GARPDispType
OBJECT-TYPE
Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
1.3.6.1.4.1.2544.1.12.43.1.5.1.22CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2ActiveControlProtocols
OBJECT-TYPE
List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
1.3.6.1.4.1.2544.1.12.43.1.5.1.23CmActiveControlProtocolsTyperead-onlycurrent
f3AccFlowPointCpdV2ELMIDispType
OBJECT-TYPE
ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
1.3.6.1.4.1.2544.1.12.43.1.5.1.24CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac00DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:00 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.25CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac01DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:01 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.26CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac02DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:02 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.27CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac03DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:03 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.28CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac04DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:04 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.29CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac05DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:05 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.30CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac06DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:06 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.31CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac07DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:07 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.32CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac08DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:08 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.33CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac09DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:09 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.34CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac0ADispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0A Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.35CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac0BDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0B Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.36CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac0CDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0C Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.37CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac0DDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0D Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.38CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac0EDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0E Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.39CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2Mac0FDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0F Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.40CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2NearestLLDPDispType
OBJECT-TYPE
LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.41CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2NonTpmrLLDPDispType
OBJECT-TYPE
LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.42CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointCpdV2CustomerLLDPDispType
OBJECT-TYPE
LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.5.1.43CmControlProtocolDispTyperead-writecurrent
f3AccFlowPointLearningConfigTable
OBJECT-TYPE
This table extends f3AccFlowPointTable to provide parameters for MAC Table control configuration.
1.3.6.1.4.1.2544.1.12.43.1.6not-accessiblecurrent
f3AccFlowPointLearningConfigEntry
OBJECT-TYPE
A conceptual row in the f3AccFlowPointLearningConfigTable.
1.3.6.1.4.1.2544.1.12.43.1.6.1not-accessiblecurrent
f3AccFlowPointLearningConfigLearningEnabled
OBJECT-TYPE
This object allows configuring Learning Control on this Flowpoint.
1.3.6.1.4.1.2544.1.12.43.1.6.1.1TruthValueread-writecurrent
f3AccFlowPointLearningConfigMaxFwdEntries
OBJECT-TYPE
This object allows configuring the maximum number of Forwarding Entries on this Flowpoint.
1.3.6.1.4.1.2544.1.12.43.1.6.1.2Integer32read-writecurrent
f3AccFlowPointLearningConfigProtectLearningCtrl
OBJECT-TYPE
This object allows configuring Learning Control on this Flowpoint.
1.3.6.1.4.1.2544.1.12.43.1.6.1.3ProtectLearningControlread-writecurrent
f3AccFlowPointLearningConfigAction
OBJECT-TYPE
This objects allows performing user action on Flow Learning Table.
1.3.6.1.4.1.2544.1.12.43.1.6.1.4FlowLearningConfigActionread-writecurrent
f3NetFlowPointTable
OBJECT-TYPE
A list of entries corresponding to Network Flow Point for configuration purposes.
1.3.6.1.4.1.2544.1.12.43.1.7not-accessiblecurrent
f3NetFlowPointEntry
OBJECT-TYPE
A conceptual row in the f3NetFlowPointTable. These entries represent an Network Flow Point. If the Flow Point attached to a lag, the slotIndex should be 255 (255 is used to identify the Flow Point belongs to lag), and the cmEthernetNetPortIndex should be the f3LagIndex.
1.3.6.1.4.1.2544.1.12.43.1.7.1not-accessiblecurrent
f3NetFlowPointIndex
OBJECT-TYPE
The integer index value corresponding to an Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.7.1.1Integer32 (1..65535)not-accessiblecurrent
f3NetFlowPointAlias
OBJECT-TYPE
This object allows SNMP management entities to provide a circuit identifier with the Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.7.1.2DisplayString (SIZE(0..64))read-createcurrent
f3NetFlowPointAdminState
OBJECT-TYPE
This object represents the Administrative State of the Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.7.1.3AdminStateread-createcurrent
f3NetFlowPointOperationalState
OBJECT-TYPE
This object represents the Operational State of the Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.7.1.4OperationalStateread-onlycurrent
f3NetFlowPointSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.7.1.5SecondaryStateread-onlycurrent
f3NetFlowPointAssociatedFlowId
OBJECT-TYPE
This object provides the association of an Flow with an Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.7.1.6VariablePointerread-onlycurrent
f3NetFlowPointIngressMultiCOSEnabled
OBJECT-TYPE
This object allows specification of ingress multiple COS (Class of Service) Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.7.1.7TruthValueread-createcurrent
f3NetFlowPointIngressCOS
OBJECT-TYPE
This object allows specification of ingress COS (Class of Service) Flow Point. This attribute has been deprecated and is not supported. The Ingress COS is determined from the flowpoint's associated Priority Mapping Profle.
1.3.6.1.4.1.2544.1.12.43.1.7.1.8Integer32read-createdeprecated
f3NetFlowPointEgressShapingType
OBJECT-TYPE
This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
1.3.6.1.4.1.2544.1.12.43.1.7.1.9ShapingTyperead-writecurrent
f3NetFlowPointIngressVlanMemberList
OBJECT-TYPE
It allows specification of VLAN members of the Flow Point. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the Flow Point is created, this attribute can only be updated using f3NetFlowPointVlanMemberAction and f3NetFlowPointVlanMemberActionVlan objects.
1.3.6.1.4.1.2544.1.12.43.1.7.1.10DisplayString (SIZE(0..512))read-createcurrent
f3NetFlowPointVlanMemberAction
OBJECT-TYPE
This object allows to add or remove the VLAN members specified by f3NetFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object f3NetFlowPointVlanMemberActionVlan and then should specify f3NetFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
1.3.6.1.4.1.2544.1.12.43.1.7.1.11FlowVlanActionTyperead-writecurrent
f3NetFlowPointVlanMemberActionVlan
OBJECT-TYPE
This object allows adding/removing VLAN members to a Flow Point. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke f3NetFlowPointVlanMemberAction.
1.3.6.1.4.1.2544.1.12.43.1.7.1.12DisplayString (SIZE(0..16))read-createcurrent
f3NetFlowPointIngressUntaggedFrameEnabled
OBJECT-TYPE
This object allows to specify whether or not the Flow Point supports untagged frame.
1.3.6.1.4.1.2544.1.12.43.1.7.1.13TruthValueread-createcurrent
f3NetFlowPointCTagControl
OBJECT-TYPE
This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3NetFlowPointCTagVlanId) and priority (f3NetFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3NetFlowPointCTagVlanId and f3NetFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3NetFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
1.3.6.1.4.1.2544.1.12.43.1.7.1.14FlowTagControlread-createcurrent
f3NetFlowPointCTagVlanId
OBJECT-TYPE
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
1.3.6.1.4.1.2544.1.12.43.1.7.1.15VlanIdread-createcurrent
f3NetFlowPointCTagVlanPriority
OBJECT-TYPE
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
1.3.6.1.4.1.2544.1.12.43.1.7.1.16VlanPriorityread-createcurrent
f3NetFlowPointSTagControl
OBJECT-TYPE
This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3NetFlowPointSTagVlanId) and priority (f3NetFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3NetFlowPointSTagVlanId and f3NetFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3NetFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
1.3.6.1.4.1.2544.1.12.43.1.7.1.17FlowTagControlread-createcurrent
f3NetFlowPointSTagVlanId
OBJECT-TYPE
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3NetFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
1.3.6.1.4.1.2544.1.12.43.1.7.1.18VlanIdread-createcurrent
f3NetFlowPointSTagVlanPriority
OBJECT-TYPE
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3NetFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
1.3.6.1.4.1.2544.1.12.43.1.7.1.19VlanPriorityread-createcurrent
f3NetFlowPointEgressOuterTagPrioMapEnabled
OBJECT-TYPE
This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
1.3.6.1.4.1.2544.1.12.43.1.7.1.20TruthValueread-createcurrent
f3NetFlowPointEgressInnerTagPrioMapEnabled
OBJECT-TYPE
This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
1.3.6.1.4.1.2544.1.12.43.1.7.1.21TruthValueread-createcurrent
f3NetFlowPointSESFramesLossThresholdRatio
OBJECT-TYPE
This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA functionality.
1.3.6.1.4.1.2544.1.12.43.1.7.1.22Integer32 (0..100)read-createcurrent
f3NetFlowPointDefaultMemberEnabled
OBJECT-TYPE
Truth Value means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.
1.3.6.1.4.1.2544.1.12.43.1.7.1.23TruthValueread-createcurrent
f3NetFlowPointMcastRateLimitEnabled
OBJECT-TYPE
Whether multicast packets need be limited per FP.
1.3.6.1.4.1.2544.1.12.43.1.7.1.24TruthValueread-createcurrent
f3NetFlowPointMcastRateLimitSpeedLo
OBJECT-TYPE
The rate limiting for multicast packets per FP. When f3NetFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.25Unsigned32read-createcurrent
f3NetFlowPointMcastRateLimitSpeedHi
OBJECT-TYPE
The rate limiting for multicast packets per FP. When f3NetFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.26Unsigned32read-createcurrent
f3NetFlowPointBcastRateLimitEnabled
OBJECT-TYPE
Whether broadcast packets need be limited per FP.
1.3.6.1.4.1.2544.1.12.43.1.7.1.27TruthValueread-createcurrent
f3NetFlowPointBcastRateLimitSpeedLo
OBJECT-TYPE
The rate limiting for broadcast packets per FP. When f3NetFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.28Unsigned32read-createcurrent
f3NetFlowPointBcastRateLimitSpeedHi
OBJECT-TYPE
The rate limiting for broadcast packets per FP. When f3NetFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.29Unsigned32read-createcurrent
f3NetFlowPointCombinedRateLimitEnabled
OBJECT-TYPE
Whether broadcast and multicast packets need be limited per FP.
1.3.6.1.4.1.2544.1.12.43.1.7.1.30TruthValueread-createcurrent
f3NetFlowPointCombinedRateLimitSpeedLo
OBJECT-TYPE
The rate limiting for broadcast and multicast packets per FP. When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.31Unsigned32read-createcurrent
f3NetFlowPointCombinedRateLimitSpeedHi
OBJECT-TYPE
The rate limiting for broadcast and multicast packets per FP. When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.32Unsigned32read-createcurrent
f3NetFlowPointSplitHorizonGroupOID
OBJECT-TYPE
Specifies the Split-Horizon Group OID. If there is no SHG, the value is none.
1.3.6.1.4.1.2544.1.12.43.1.7.1.33VariablePointerread-createcurrent
f3NetFlowPointLoopAvoidance
OBJECT-TYPE
EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
1.3.6.1.4.1.2544.1.12.43.1.7.1.34VariablePointerread-createcurrent
f3NetFlowPointHierarchicalCOSEnabled
OBJECT-TYPE
Enable or Disable Hierarchical COS shaping (flow shaping).
1.3.6.1.4.1.2544.1.12.43.1.7.1.35TruthValueread-createcurrent
f3NetFlowPointMaximumBWLo
OBJECT-TYPE
This attribute description the Flow Point maximum bandwidth. This object only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.36Unsigned32read-createcurrent
f3NetFlowPointMaximumBWHi
OBJECT-TYPE
This attribute description the Flow Point maximum bandwidth. This object only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.37Unsigned32read-createcurrent
f3NetFlowPointGuaranteedBWLo
OBJECT-TYPE
This attribute description the Flow Point guaranteed bandwidth. This object only represents low 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.38Unsigned32read-createcurrent
f3NetFlowPointGuaranteedBWHi
OBJECT-TYPE
This attribute description the Flow Point guaranteed bandwidth. This objects only represents high 32 bits.
1.3.6.1.4.1.2544.1.12.43.1.7.1.39Unsigned32read-createcurrent
f3NetFlowPointAutoBandwidthConfigEnabled
OBJECT-TYPE
This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available port bandwidth multiplied by the value of the f3NetFlowPointAutoCIRPercentage object. For a Hierarchical-COS Flow Point, the f3NetFlowPointMaximumBWLo and f3NetFlowPointMaximumBWHi are set to the maximum port bandwidth; the f3NetFlowPointGuaranteedBWLo and f3NetFlowPointGuaranteedBWHi are set to the available port bandwidth multiplied by the value of the f3NetFlowPointAutoCIRPercentage object. The value of this object must be FALSE when f3NetFlowPointIngressMultiCOSEnabled is TRUE and f3NetFlowPointHierarchicalCOSEnabled is FALSE.
1.3.6.1.4.1.2544.1.12.43.1.7.1.40TruthValueread-createcurrent
f3NetFlowPointAutoCIRPercentage
OBJECT-TYPE
This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when f3NetFlowPointAutoBandwidthConfigEnabled is TRUE.
1.3.6.1.4.1.2544.1.12.43.1.7.1.41Integer32 (0..100)read-createcurrent
f3NetFlowPointFrameFwdEnabled
OBJECT-TYPE
When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
1.3.6.1.4.1.2544.1.12.43.1.7.1.42TruthValueread-createcurrent
f3NetFlowPointStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.43.1.7.1.43StorageTyperead-createcurrent
f3NetFlowPointRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3NetFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3NetFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3NetFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.43.1.7.1.44RowStatusread-createcurrent
f3NetFlowPointUsePortPrioMapProfile
OBJECT-TYPE
This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
1.3.6.1.4.1.2544.1.12.43.1.7.1.45TruthValueread-writecurrent
f3NetFlowPointRefPrioMapProfile
OBJECT-TYPE
This object allows to set priority map profile.
1.3.6.1.4.1.2544.1.12.43.1.7.1.46VariablePointerread-writecurrent
f3NetFlowpointRefConnectGuardFlowObject
OBJECT-TYPE
This object specifies Mac Sec flow object OID.
1.3.6.1.4.1.2544.1.12.43.1.7.1.47VariablePointerread-writecurrent
f3NetFlowpointSecureBlockingControl
OBJECT-TYPE
This object can be used to enable/disable secure block.
1.3.6.1.4.1.2544.1.12.43.1.7.1.48TruthValueread-writecurrent
f3NetFlowpointSecureState
OBJECT-TYPE
This object specifies the secure state of this flow.
1.3.6.1.4.1.2544.1.12.43.1.7.1.49FlowSecStateread-onlycurrent
f3NetFpQosShaperTable
OBJECT-TYPE
A list of entries corresponding to Net Flow Point Quality of Service Shaper for configuration purposes.
1.3.6.1.4.1.2544.1.12.43.1.8not-accessiblecurrent
f3NetFpQosShaperEntry
OBJECT-TYPE
A conceptual row in the f3NetFpQosShaperTable. These entries represent an Net Flow Point Quality of Service Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1not-accessiblecurrent
f3NetFpQosShaperIndex
OBJECT-TYPE
The unique integer index value corresponding to a Quality of Service Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.1Integer32 (1..8)not-accessiblecurrent
f3NetFpQosShaperAdminState
OBJECT-TYPE
This object represents the Administrative State of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.2AdminStateread-createcurrent
f3NetFpQosShaperOperationalState
OBJECT-TYPE
This object represents the Operational State of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.3OperationalStateread-onlycurrent
f3NetFpQosShaperSecondaryState
OBJECT-TYPE
This object represents the Secondary State of the Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.4SecondaryStateread-onlycurrent
f3NetFpQosShaperCIRLo
OBJECT-TYPE
This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.5Unsigned32read-createcurrent
f3NetFpQosShaperCIRHi
OBJECT-TYPE
This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.6Unsigned32read-createcurrent
f3NetFpQosShaperEIRLo
OBJECT-TYPE
This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.7Unsigned32read-createcurrent
f3NetFpQosShaperEIRHi
OBJECT-TYPE
This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.8Unsigned32read-createcurrent
f3NetFpQosShaperCBS
OBJECT-TYPE
This object represents the Commited Burst Size (CBS) of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.9Unsigned32read-createcurrent
f3NetFpQosShaperEBS
OBJECT-TYPE
This object represents the Excess Burst Size (EBS) of a Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.10Unsigned32read-createcurrent
f3NetFpQosShaperBufferSize
OBJECT-TYPE
This object represents the Buffer Size of the Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.11Unsigned32read-createcurrent
f3NetFpQosShaperCOS
OBJECT-TYPE
This object provides the COS (Class of Service) value for the QOS Shaper.
1.3.6.1.4.1.2544.1.12.43.1.8.1.12Integer32 (0..7)read-onlycurrent
f3NetFpQosShaperStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.43.1.8.1.13StorageTyperead-createcurrent
f3NetFpQosShaperRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3NetFpQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3NetFpQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3NetFpQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.43.1.8.1.14RowStatusread-createcurrent
f3NetFpQosPolicerTable
OBJECT-TYPE
A list of entries corresponding to Net Flow Point Quality of Service Policer for configuration purposes.
1.3.6.1.4.1.2544.1.12.43.1.9not-accessiblecurrent
f3NetFpQosPolicerEntry
OBJECT-TYPE
A conceptual row in the f3NetFpQosPolicerTable. These entries represent an Net Flow Point Quality of Service Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1not-accessiblecurrent
f3NetFpQosPolicerIndex
OBJECT-TYPE
The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
1.3.6.1.4.1.2544.1.12.43.1.9.1.1Integer32 (1..8)not-accessiblecurrent
f3NetFpQosPolicerAdminState
OBJECT-TYPE
This object represents the Administrative State of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.2AdminStateread-createcurrent
f3NetFpQosPolicerOperationalState
OBJECT-TYPE
This object represents the Operational State of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.3OperationalStateread-onlycurrent
f3NetFpQosPolicerSecondaryState
OBJECT-TYPE
This object represents the Secondary State of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.4SecondaryStateread-onlycurrent
f3NetFpQosPolicerCIRLo
OBJECT-TYPE
This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.5Unsigned32read-createcurrent
f3NetFpQosPolicerCIRHi
OBJECT-TYPE
This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.6Unsigned32read-createcurrent
f3NetFpQosPolicerEIRLo
OBJECT-TYPE
This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.7Unsigned32read-createcurrent
f3NetFpQosPolicerEIRHi
OBJECT-TYPE
This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.8Unsigned32read-createcurrent
f3NetFpQosPolicerCBS
OBJECT-TYPE
This object represents the Commited Burst Size (CBS) of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.9Integer32read-createcurrent
f3NetFpQosPolicerEBS
OBJECT-TYPE
This object represents the Excess Burst Size (EBS) of a Policer.
1.3.6.1.4.1.2544.1.12.43.1.9.1.10Integer32read-createcurrent
f3NetFpQosPolicerAlgorithm
OBJECT-TYPE
This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
1.3.6.1.4.1.2544.1.12.43.1.9.1.11PolicerAlgorithmTyperead-onlycurrent
f3NetFpQosPolicerColorMode
OBJECT-TYPE
This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
1.3.6.1.4.1.2544.1.12.43.1.9.1.12PolicerColorModeread-createcurrent
f3NetFpQosPolicerCouplingFlag
OBJECT-TYPE
This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
1.3.6.1.4.1.2544.1.12.43.1.9.1.13TruthValueread-createcurrent
f3NetFpQosPolicerPolicingEnabled
OBJECT-TYPE
This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.
1.3.6.1.4.1.2544.1.12.43.1.9.1.14TruthValueread-createcurrent
f3NetFpQosPolicerStorageType
OBJECT-TYPE
The type of storage configured for this entry.
1.3.6.1.4.1.2544.1.12.43.1.9.1.15StorageTyperead-createcurrent
f3NetFpQosPolicerRowStatus
OBJECT-TYPE
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3NetFpQosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3NetFpQosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3NetFpQosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
1.3.6.1.4.1.2544.1.12.43.1.9.1.16RowStatusread-createcurrent
f3NetFlowPointCpdV2Table
OBJECT-TYPE
A list of entries corresponding to Net Flow Point Control Protocol Disposition V2.
1.3.6.1.4.1.2544.1.12.43.1.10not-accessiblecurrent
f3NetFlowPointCpdV2Entry
OBJECT-TYPE
A conceptual row in the f3NetFlowPointCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Net Flow Point.
1.3.6.1.4.1.2544.1.12.43.1.10.1not-accessiblecurrent
f3NetFlowPointCpdV2Index
OBJECT-TYPE
Unique Index value to access the CPD row.
1.3.6.1.4.1.2544.1.12.43.1.10.1.1Integer32not-accessiblecurrent
f3NetFlowPointCpdV2IslDispType
OBJECT-TYPE
Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
1.3.6.1.4.1.2544.1.12.43.1.10.1.2CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2PagpDispType
OBJECT-TYPE
Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
1.3.6.1.4.1.2544.1.12.43.1.10.1.3CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2UdldDispType
OBJECT-TYPE
Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
1.3.6.1.4.1.2544.1.12.43.1.10.1.4CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2CdpDispType
OBJECT-TYPE
Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
1.3.6.1.4.1.2544.1.12.43.1.10.1.5CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2VtpDispType
OBJECT-TYPE
Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
1.3.6.1.4.1.2544.1.12.43.1.10.1.6CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2DtpDispType
OBJECT-TYPE
Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
1.3.6.1.4.1.2544.1.12.43.1.10.1.7CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2PvstpPlusDispType
OBJECT-TYPE
Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
1.3.6.1.4.1.2544.1.12.43.1.10.1.8CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2UplinkFastDispType
OBJECT-TYPE
Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
1.3.6.1.4.1.2544.1.12.43.1.10.1.9CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2VlanBridgeDispType
OBJECT-TYPE
Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
1.3.6.1.4.1.2544.1.12.43.1.10.1.10CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2L2PTDispType
OBJECT-TYPE
Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
1.3.6.1.4.1.2544.1.12.43.1.10.1.11CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2BPDUDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
1.3.6.1.4.1.2544.1.12.43.1.10.1.12CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2PauseDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
1.3.6.1.4.1.2544.1.12.43.1.10.1.13CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2LACPDispType
OBJECT-TYPE
Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
1.3.6.1.4.1.2544.1.12.43.1.10.1.14CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2LACPMarkerDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
1.3.6.1.4.1.2544.1.12.43.1.10.1.15CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2EfmOamDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
1.3.6.1.4.1.2544.1.12.43.1.10.1.16CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2SSMDispType
OBJECT-TYPE
Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
1.3.6.1.4.1.2544.1.12.43.1.10.1.17CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2PortAuthenDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
1.3.6.1.4.1.2544.1.12.43.1.10.1.18CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2LANBridgesDispType
OBJECT-TYPE
Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
1.3.6.1.4.1.2544.1.12.43.1.10.1.19CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2GMRPDispType
OBJECT-TYPE
Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
1.3.6.1.4.1.2544.1.12.43.1.10.1.20CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2GVRPDispType
OBJECT-TYPE
Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
1.3.6.1.4.1.2544.1.12.43.1.10.1.21CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2GARPDispType
OBJECT-TYPE
Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
1.3.6.1.4.1.2544.1.12.43.1.10.1.22CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2ActiveControlProtocols
OBJECT-TYPE
List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
1.3.6.1.4.1.2544.1.12.43.1.10.1.23CmActiveControlProtocolsTyperead-onlycurrent
f3NetFlowPointCpdV2ELMIDispType
OBJECT-TYPE
ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
1.3.6.1.4.1.2544.1.12.43.1.10.1.24CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac00DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:00 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.25CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac01DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:01 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.26CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac02DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:02 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.27CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac03DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:03 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.28CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac04DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:04 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.29CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac05DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:05 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.30CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac06DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:06 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.31CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac07DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:07 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.32CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac08DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:08 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.33CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac09DispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:09 Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.34CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac0ADispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0A Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.35CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac0BDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0B Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.36CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac0CDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0C Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.37CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac0DDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0D Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.38CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac0EDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0E Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.39CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2Mac0FDispType
OBJECT-TYPE
MAC Address 01:80:C2:00:00:0F Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.40CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2NearestLLDPDispType
OBJECT-TYPE
LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.41CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2NonTpmrLLDPDispType
OBJECT-TYPE
LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.42CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointCpdV2CustomerLLDPDispType
OBJECT-TYPE
LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
1.3.6.1.4.1.2544.1.12.43.1.10.1.43CmControlProtocolDispTyperead-writecurrent
f3NetFlowPointLearningConfigTable
OBJECT-TYPE
This table extends f3NetFlowPointTable to provide parameters for MAC Table control configuration.
1.3.6.1.4.1.2544.1.12.43.1.11not-accessiblecurrent
f3NetFlowPointLearningConfigEntry
OBJECT-TYPE
A conceptual row in the f3NetFlowPointLearningConfigTable.
1.3.6.1.4.1.2544.1.12.43.1.11.1not-accessiblecurrent
f3NetFlowPointLearningConfigLearningEnabled
OBJECT-TYPE
This object allows configuring Learning Control on this Flowpoint.
1.3.6.1.4.1.2544.1.12.43.1.11.1.1TruthValueread-writecurrent
f3NetFlowPointLearningConfigMaxFwdEntries
OBJECT-TYPE
This object allows configuring the maximum number of Forwarding Entries on this Flowpoint.
1.3.6.1.4.1.2544.1.12.43.1.11.1.2Integer32read-writecurrent
f3NetFlowPointLearningConfigProtectLearningCtrl
OBJECT-TYPE
This object allows configuring Learning Control on this Flowpoint.
1.3.6.1.4.1.2544.1.12.43.1.11.1.3ProtectLearningControlread-writecurrent
f3NetFlowPointLearningConfigAction
OBJECT-TYPE
This objects allows performing user action on Flow Learning Table.
1.3.6.1.4.1.2544.1.12.43.1.11.1.4FlowLearningConfigActionread-writecurrent
f3FpmPerfObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.43.2
f3AccFlowPointStatsTable
OBJECT-TYPE
A collection of FlowPoint statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.43.2.1not-accessiblecurrent
f3AccFlowPointStatsEntry
OBJECT-TYPE
A conceptual row in the f3AccFlowPointStatsTable. Entries exist in this table for each FlowPoint.
1.3.6.1.4.1.2544.1.12.43.2.1.1not-accessiblecurrent
f3AccFlowPointStatsIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this Access Ethernet Flowpoint statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.43.2.1.1.1Integer32 (1..65535)read-onlycurrent
f3AccFlowPointStatsIntervalType
OBJECT-TYPE
Interval over which Performance Monitoring data is collected.
1.3.6.1.4.1.2544.1.12.43.2.1.1.2CmPmIntervalTyperead-onlycurrent
f3AccFlowPointStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.1.1.3TruthValueread-onlycurrent
f3AccFlowPointStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.1.1.4CmPmBinActionread-writecurrent
f3AccFlowPointStatsL2CPFD
OBJECT-TYPE
Layer 2 Control Protocol Frames Discarded.
1.3.6.1.4.1.2544.1.12.43.2.1.1.5PerfCounter64read-onlycurrent
f3AccFlowPointStatsABRRx
OBJECT-TYPE
The average bit rate.
1.3.6.1.4.1.2544.1.12.43.2.1.1.6PerfCounter64read-onlycurrent
f3AccFlowPointStatsABRRLRx
OBJECT-TYPE
The average bit rate, rate limited.
1.3.6.1.4.1.2544.1.12.43.2.1.1.7PerfCounter64read-onlycurrent
f3AccFlowPointStatsUAS
OBJECT-TYPE
The number of Unavailable Seconds (UAS).
1.3.6.1.4.1.2544.1.12.43.2.1.1.8PerfCounter64read-onlycurrent
f3AccFlowPointStatsSES
OBJECT-TYPE
The number of Severely Errored Seconds (ES).
1.3.6.1.4.1.2544.1.12.43.2.1.1.9PerfCounter64read-onlycurrent
f3AccFlowPointStatsFMG
OBJECT-TYPE
The number of Frames Marked Green.
1.3.6.1.4.1.2544.1.12.43.2.1.1.10PerfCounter64read-onlycurrent
f3AccFlowPointStatsFMY
OBJECT-TYPE
The number of Frames Marked Yellow.
1.3.6.1.4.1.2544.1.12.43.2.1.1.11PerfCounter64read-onlycurrent
f3AccFlowPointStatsFMRD
OBJECT-TYPE
The number of Frames Marked Red and Discarded.
1.3.6.1.4.1.2544.1.12.43.2.1.1.12PerfCounter64read-onlycurrent
f3AccFlowPointStatsFTD
OBJECT-TYPE
The number of Frames Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.1.1.13PerfCounter64read-onlycurrent
f3AccFlowPointStatsBytesIn
OBJECT-TYPE
The number of Bytes In in the ingress direction.
1.3.6.1.4.1.2544.1.12.43.2.1.1.14PerfCounter64read-onlycurrent
f3AccFlowPointStatsBytesOut
OBJECT-TYPE
The number of Bytes Out in the ingress direction.
1.3.6.1.4.1.2544.1.12.43.2.1.1.15PerfCounter64read-onlycurrent
f3AccFlowPointStatsIBRMax
OBJECT-TYPE
Instantaneous Bit Rate Maximum.
1.3.6.1.4.1.2544.1.12.43.2.1.1.16PerfCounter64read-onlycurrent
f3AccFlowPointStatsIBRRlMax
OBJECT-TYPE
Instantaneous Bit Rate Maximum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.1.1.17PerfCounter64read-onlycurrent
f3AccFlowPointStatsIBRMin
OBJECT-TYPE
Instantaneous Bit Rate Minimum.
1.3.6.1.4.1.2544.1.12.43.2.1.1.18PerfCounter64read-onlycurrent
f3AccFlowPointStatsIBRRlMin
OBJECT-TYPE
Instantaneous Bit Rate Minimum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.1.1.19PerfCounter64read-onlycurrent
f3AccFlowPointStatsIBR
OBJECT-TYPE
Instantaneous Bit Rate Minimum.
1.3.6.1.4.1.2544.1.12.43.2.1.1.20PerfCounter64read-onlycurrent
f3AccFlowPointStatsIBRRl
OBJECT-TYPE
Instantaneous Bit Rate Minimum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.1.1.21PerfCounter64read-onlycurrent
f3AccFlowPointStatsFBCD
OBJECT-TYPE
The number of Frames Dropped - Broadcast Rate Limit.
1.3.6.1.4.1.2544.1.12.43.2.1.1.22PerfCounter64read-onlycurrent
f3AccFlowPointStatsFMCD
OBJECT-TYPE
The number of Frames Dropped - Multicast Rate Limit.
1.3.6.1.4.1.2544.1.12.43.2.1.1.23PerfCounter64read-onlycurrent
f3AccFlowPointStatsFdRxFb
OBJECT-TYPE
The number of Frames Dropped RX - Flowpoint Blocked.
1.3.6.1.4.1.2544.1.12.43.2.1.1.24PerfCounter64read-onlycurrent
f3AccFlowPointStatsFdTxFb
OBJECT-TYPE
The number of Frames Dropped TX - Flowpoint Blocked.
1.3.6.1.4.1.2544.1.12.43.2.1.1.25PerfCounter64read-onlycurrent
f3AccFlowPointStatsFdicd
OBJECT-TYPE
The number of Frames Dropped - Ingress COS Disabled.
1.3.6.1.4.1.2544.1.12.43.2.1.1.26PerfCounter64read-onlycurrent
f3AccFlowPointStatsNumLearnTableFlushes
OBJECT-TYPE
The number of learning table flushes.
1.3.6.1.4.1.2544.1.12.43.2.1.1.27PerfCounter64read-onlycurrent
f3NetFlowPointStatsTable
OBJECT-TYPE
A collection of FlowPoint statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.43.2.2not-accessiblecurrent
f3NetFlowPointStatsEntry
OBJECT-TYPE
A conceptual row in the f3NetFlowPointStatsTable. Entries exist in this table for each FlowPoint.
1.3.6.1.4.1.2544.1.12.43.2.2.1not-accessiblecurrent
f3NetFlowPointStatsIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this Access Ethernet Flowpoint statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.43.2.2.1.1Integer32 (1..65535)read-onlycurrent
f3NetFlowPointStatsIntervalType
OBJECT-TYPE
Interval over which Performance Monitoring data is collected.
1.3.6.1.4.1.2544.1.12.43.2.2.1.2CmPmIntervalTyperead-onlycurrent
f3NetFlowPointStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.2.1.3TruthValueread-onlycurrent
f3NetFlowPointStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.2.1.4CmPmBinActionread-writecurrent
f3NetFlowPointStatsL2CPFD
OBJECT-TYPE
Layer 2 Control Protocol Frames Discarded.
1.3.6.1.4.1.2544.1.12.43.2.2.1.5PerfCounter64read-onlycurrent
f3NetFlowPointStatsABRRx
OBJECT-TYPE
The average bit rate.
1.3.6.1.4.1.2544.1.12.43.2.2.1.6PerfCounter64read-onlycurrent
f3NetFlowPointStatsABRRLRx
OBJECT-TYPE
The average bit rate, rate limited.
1.3.6.1.4.1.2544.1.12.43.2.2.1.7PerfCounter64read-onlycurrent
f3NetFlowPointStatsUAS
OBJECT-TYPE
The number of Unavailable Seconds (UAS).
1.3.6.1.4.1.2544.1.12.43.2.2.1.8PerfCounter64read-onlycurrent
f3NetFlowPointStatsSES
OBJECT-TYPE
The number of Severely Errored Seconds (ES).
1.3.6.1.4.1.2544.1.12.43.2.2.1.9PerfCounter64read-onlycurrent
f3NetFlowPointStatsFMG
OBJECT-TYPE
The number of Frames Marked Green.
1.3.6.1.4.1.2544.1.12.43.2.2.1.10PerfCounter64read-onlycurrent
f3NetFlowPointStatsFMY
OBJECT-TYPE
The number of Frames Marked Yellow.
1.3.6.1.4.1.2544.1.12.43.2.2.1.11PerfCounter64read-onlycurrent
f3NetFlowPointStatsFMRD
OBJECT-TYPE
The number of Frames Marked Red and Discarded.
1.3.6.1.4.1.2544.1.12.43.2.2.1.12PerfCounter64read-onlycurrent
f3NetFlowPointStatsFTD
OBJECT-TYPE
The number of Frames Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.2.1.13PerfCounter64read-onlycurrent
f3NetFlowPointStatsBytesIn
OBJECT-TYPE
The number of Bytes In in the ingress direction.
1.3.6.1.4.1.2544.1.12.43.2.2.1.14PerfCounter64read-onlycurrent
f3NetFlowPointStatsBytesOut
OBJECT-TYPE
The number of Bytes Out in the ingress direction.
1.3.6.1.4.1.2544.1.12.43.2.2.1.15PerfCounter64read-onlycurrent
f3NetFlowPointStatsIBRMax
OBJECT-TYPE
Instantaneous Bit Rate Maximum.
1.3.6.1.4.1.2544.1.12.43.2.2.1.16PerfCounter64read-onlycurrent
f3NetFlowPointStatsIBRRlMax
OBJECT-TYPE
Instantaneous Bit Rate Maximum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.2.1.17PerfCounter64read-onlycurrent
f3NetFlowPointStatsIBRMin
OBJECT-TYPE
Instantaneous Bit Rate Minimum.
1.3.6.1.4.1.2544.1.12.43.2.2.1.18PerfCounter64read-onlycurrent
f3NetFlowPointStatsIBRRlMin
OBJECT-TYPE
Instantaneous Bit Rate Minimum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.2.1.19PerfCounter64read-onlycurrent
f3NetFlowPointStatsIBR
OBJECT-TYPE
Instantaneous Bit Rate Minimum.
1.3.6.1.4.1.2544.1.12.43.2.2.1.20PerfCounter64read-onlycurrent
f3NetFlowPointStatsIBRRl
OBJECT-TYPE
Instantaneous Bit Rate Minimum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.2.1.21PerfCounter64read-onlycurrent
f3NetFlowPointStatsFBCD
OBJECT-TYPE
The number of Frames Dropped - Broadcast Rate Limit.
1.3.6.1.4.1.2544.1.12.43.2.2.1.22PerfCounter64read-onlycurrent
f3NetFlowPointStatsFMCD
OBJECT-TYPE
The number of Frames Dropped - Multicast Rate Limit.
1.3.6.1.4.1.2544.1.12.43.2.2.1.23PerfCounter64read-onlycurrent
f3NetFlowPointStatsFdRxFb
OBJECT-TYPE
The number of Frames Dropped RX - Flowpoint Blocked.
1.3.6.1.4.1.2544.1.12.43.2.2.1.24PerfCounter64read-onlycurrent
f3NetFlowPointStatsFdTxFb
OBJECT-TYPE
The number of Frames Dropped TX - Flowpoint Blocked.
1.3.6.1.4.1.2544.1.12.43.2.2.1.25PerfCounter64read-onlycurrent
f3NetFlowPointStatsFdicd
OBJECT-TYPE
The number of Frames Dropped - Ingress COS Disabled.
1.3.6.1.4.1.2544.1.12.43.2.2.1.26PerfCounter64read-onlycurrent
f3NetFlowPointStatsNumLearnTableFlushes
OBJECT-TYPE
The number of learning table flushes.
1.3.6.1.4.1.2544.1.12.43.2.2.1.27PerfCounter64read-onlycurrent
f3AccFlowPointHistoryTable
OBJECT-TYPE
A collection of FlowPoint statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.43.2.3not-accessiblecurrent
f3AccFlowPointHistoryEntry
OBJECT-TYPE
A conceptual row in the f3AccFlowPointHistoryTable. Entries exist in this table for each FlowPoint.
1.3.6.1.4.1.2544.1.12.43.2.3.1not-accessiblecurrent
f3AccFlowPointHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this Access Ethernet Flowpoint History statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.43.2.3.1.1Integer32 (1..65535)read-onlycurrent
f3AccFlowPointHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.43.2.3.1.2DateAndTimeread-onlycurrent
f3AccFlowPointHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.3.1.3TruthValueread-onlycurrent
f3AccFlowPointHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.3.1.4CmPmBinActionread-writecurrent
f3AccFlowPointHistoryL2CPFD
OBJECT-TYPE
Layer 2 Control Protocol Frames Discarded.
1.3.6.1.4.1.2544.1.12.43.2.3.1.5PerfCounter64read-onlycurrent
f3AccFlowPointHistoryABRRx
OBJECT-TYPE
The average bit rate.
1.3.6.1.4.1.2544.1.12.43.2.3.1.6PerfCounter64read-onlycurrent
f3AccFlowPointHistoryABRRLRx
OBJECT-TYPE
The average bit rate, rate limited.
1.3.6.1.4.1.2544.1.12.43.2.3.1.7PerfCounter64read-onlycurrent
f3AccFlowPointHistoryUAS
OBJECT-TYPE
The number of Unavailable Seconds (UAS).
1.3.6.1.4.1.2544.1.12.43.2.3.1.8PerfCounter64read-onlycurrent
f3AccFlowPointHistorySES
OBJECT-TYPE
The number of Severely Errored Seconds (ES).
1.3.6.1.4.1.2544.1.12.43.2.3.1.9PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFMG
OBJECT-TYPE
The number of Frames Marked Green.
1.3.6.1.4.1.2544.1.12.43.2.3.1.10PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFMY
OBJECT-TYPE
The number of Frames Marked Yellow.
1.3.6.1.4.1.2544.1.12.43.2.3.1.11PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFMRD
OBJECT-TYPE
The number of Frames Marked Red and Discarded.
1.3.6.1.4.1.2544.1.12.43.2.3.1.12PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFTD
OBJECT-TYPE
The number of Frames Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.3.1.13PerfCounter64read-onlycurrent
f3AccFlowPointHistoryBytesIn
OBJECT-TYPE
The number of Bytes In in the ingress direction.
1.3.6.1.4.1.2544.1.12.43.2.3.1.14PerfCounter64read-onlycurrent
f3AccFlowPointHistoryBytesOut
OBJECT-TYPE
The number of Bytes Out in the ingress direction.
1.3.6.1.4.1.2544.1.12.43.2.3.1.15PerfCounter64read-onlycurrent
f3AccFlowPointHistoryIBRMax
OBJECT-TYPE
Instantaneous Bit Rate Maximum.
1.3.6.1.4.1.2544.1.12.43.2.3.1.16PerfCounter64read-onlycurrent
f3AccFlowPointHistoryIBRRlMax
OBJECT-TYPE
Instantaneous Bit Rate Maximum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.3.1.17PerfCounter64read-onlycurrent
f3AccFlowPointHistoryIBRMin
OBJECT-TYPE
Instantaneous Bit Rate Minimum.
1.3.6.1.4.1.2544.1.12.43.2.3.1.18PerfCounter64read-onlycurrent
f3AccFlowPointHistoryIBRRlMin
OBJECT-TYPE
Instantaneous Bit Rate Minimum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.3.1.19PerfCounter64read-onlycurrent
f3AccFlowPointHistoryIBR
OBJECT-TYPE
Instantaneous Bit Rate Minimum.
1.3.6.1.4.1.2544.1.12.43.2.3.1.20PerfCounter64read-onlycurrent
f3AccFlowPointHistoryIBRRl
OBJECT-TYPE
Instantaneous Bit Rate Minimum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.3.1.21PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFBCD
OBJECT-TYPE
The number of Frames Dropped - Broadcast Rate Limit.
1.3.6.1.4.1.2544.1.12.43.2.3.1.22PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFMCD
OBJECT-TYPE
The number of Frames Dropped - Multicast Rate Limit.
1.3.6.1.4.1.2544.1.12.43.2.3.1.23PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFdRxFb
OBJECT-TYPE
The number of Frames Dropped RX - Flowpoint Blocked.
1.3.6.1.4.1.2544.1.12.43.2.3.1.24PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFdTxFb
OBJECT-TYPE
The number of Frames Dropped TX - Flowpoint Blocked.
1.3.6.1.4.1.2544.1.12.43.2.3.1.25PerfCounter64read-onlycurrent
f3AccFlowPointHistoryFdicd
OBJECT-TYPE
The number of Frames Dropped - Ingress COS Disabled.
1.3.6.1.4.1.2544.1.12.43.2.3.1.26PerfCounter64read-onlycurrent
f3AccFlowPointHistoryNumLearnTableFlushes
OBJECT-TYPE
The number of learning table flushes.
1.3.6.1.4.1.2544.1.12.43.2.3.1.27PerfCounter64read-onlycurrent
f3NetFlowPointHistoryTable
OBJECT-TYPE
A collection of FlowPoint statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.43.2.4not-accessiblecurrent
f3NetFlowPointHistoryEntry
OBJECT-TYPE
A conceptual row in the f3NetFlowPointHistoryTable. Entries exist in this table for each FlowPoint.
1.3.6.1.4.1.2544.1.12.43.2.4.1not-accessiblecurrent
f3NetFlowPointHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this Access Ethernet Flowpoint History statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.43.2.4.1.1Integer32 (1..65535)read-onlycurrent
f3NetFlowPointHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.43.2.4.1.2DateAndTimeread-onlycurrent
f3NetFlowPointHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.4.1.3TruthValueread-onlycurrent
f3NetFlowPointHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.4.1.4CmPmBinActionread-writecurrent
f3NetFlowPointHistoryL2CPFD
OBJECT-TYPE
Layer 2 Control Protocol Frames Discarded.
1.3.6.1.4.1.2544.1.12.43.2.4.1.5PerfCounter64read-onlycurrent
f3NetFlowPointHistoryABRRx
OBJECT-TYPE
The average bit rate.
1.3.6.1.4.1.2544.1.12.43.2.4.1.6PerfCounter64read-onlycurrent
f3NetFlowPointHistoryABRRLRx
OBJECT-TYPE
The average bit rate, rate limited.
1.3.6.1.4.1.2544.1.12.43.2.4.1.7PerfCounter64read-onlycurrent
f3NetFlowPointHistoryUAS
OBJECT-TYPE
The number of Unavailable Seconds (UAS).
1.3.6.1.4.1.2544.1.12.43.2.4.1.8PerfCounter64read-onlycurrent
f3NetFlowPointHistorySES
OBJECT-TYPE
The number of Severely Errored Seconds (ES).
1.3.6.1.4.1.2544.1.12.43.2.4.1.9PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFMG
OBJECT-TYPE
The number of Frames Marked Green.
1.3.6.1.4.1.2544.1.12.43.2.4.1.10PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFMY
OBJECT-TYPE
The number of Frames Marked Yellow.
1.3.6.1.4.1.2544.1.12.43.2.4.1.11PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFMRD
OBJECT-TYPE
The number of Frames Marked Red and Discarded.
1.3.6.1.4.1.2544.1.12.43.2.4.1.12PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFTD
OBJECT-TYPE
The number of Frames Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.4.1.13PerfCounter64read-onlycurrent
f3NetFlowPointHistoryBytesIn
OBJECT-TYPE
The number of Bytes In in the ingress direction.
1.3.6.1.4.1.2544.1.12.43.2.4.1.14PerfCounter64read-onlycurrent
f3NetFlowPointHistoryBytesOut
OBJECT-TYPE
The number of Bytes Out in the ingress direction.
1.3.6.1.4.1.2544.1.12.43.2.4.1.15PerfCounter64read-onlycurrent
f3NetFlowPointHistoryIBRMax
OBJECT-TYPE
Instantaneous Bit Rate Maximum.
1.3.6.1.4.1.2544.1.12.43.2.4.1.16PerfCounter64read-onlycurrent
f3NetFlowPointHistoryIBRRlMax
OBJECT-TYPE
Instantaneous Bit Rate Maximum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.4.1.17PerfCounter64read-onlycurrent
f3NetFlowPointHistoryIBRMin
OBJECT-TYPE
Instantaneous Bit Rate Minimum.
1.3.6.1.4.1.2544.1.12.43.2.4.1.18PerfCounter64read-onlycurrent
f3NetFlowPointHistoryIBRRlMin
OBJECT-TYPE
Instantaneous Bit Rate Minimum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.4.1.19PerfCounter64read-onlycurrent
f3NetFlowPointHistoryIBR
OBJECT-TYPE
Instantaneous Bit Rate Minimum.
1.3.6.1.4.1.2544.1.12.43.2.4.1.20PerfCounter64read-onlycurrent
f3NetFlowPointHistoryIBRRl
OBJECT-TYPE
Instantaneous Bit Rate Minimum - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.4.1.21PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFBCD
OBJECT-TYPE
The number of Frames Dropped - Broadcast Rate Limit.
1.3.6.1.4.1.2544.1.12.43.2.4.1.22PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFMCD
OBJECT-TYPE
The number of Frames Dropped - Multicast Rate Limit.
1.3.6.1.4.1.2544.1.12.43.2.4.1.23PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFdRxFb
OBJECT-TYPE
The number of Frames Dropped RX - Flowpoint Blocked.
1.3.6.1.4.1.2544.1.12.43.2.4.1.24PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFdTxFb
OBJECT-TYPE
The number of Frames Dropped TX - Flowpoint Blocked.
1.3.6.1.4.1.2544.1.12.43.2.4.1.25PerfCounter64read-onlycurrent
f3NetFlowPointHistoryFdicd
OBJECT-TYPE
The number of Frames Dropped - Ingress COS Disabled.
1.3.6.1.4.1.2544.1.12.43.2.4.1.26PerfCounter64read-onlycurrent
f3NetFlowPointHistoryNumLearnTableFlushes
OBJECT-TYPE
The number of learning table flushes.
1.3.6.1.4.1.2544.1.12.43.2.4.1.27PerfCounter64read-onlycurrent
f3AccFlowPointThresholdTable
OBJECT-TYPE
A table of entries that allow manageability of Agg FlowPoint Thresholds.
1.3.6.1.4.1.2544.1.12.43.2.5not-accessiblecurrent
f3AccFlowPointThresholdEntry
OBJECT-TYPE
A conceptual row in the f3AccFlowPointThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.5.1not-accessiblecurrent
f3AccFlowPointThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3AccFlowPointThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.5.1.1Integer32 (1..65535)read-onlycurrent
f3AccFlowPointThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.43.2.5.1.2CmPmIntervalTyperead-onlycurrent
f3AccFlowPointThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.43.2.5.1.3VariablePointerread-onlycurrent
f3AccFlowPointThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.5.1.4Unsigned32read-writecurrent
f3AccFlowPointThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.5.1.5Unsigned32read-writecurrent
f3AccFlowPointThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3AccFlowPointThresholdVariable.
1.3.6.1.4.1.2544.1.12.43.2.5.1.6Counter64read-onlycurrent
f3NetFlowPointThresholdTable
OBJECT-TYPE
A table of entries that allow manageability of Agg FlowPoint Thresholds.
1.3.6.1.4.1.2544.1.12.43.2.6not-accessiblecurrent
f3NetFlowPointThresholdEntry
OBJECT-TYPE
A conceptual row in the f3NetFlowPointThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.6.1not-accessiblecurrent
f3NetFlowPointThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3NetFlowPointThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.6.1.1Integer32 (1..65535)read-onlycurrent
f3NetFlowPointThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.43.2.6.1.2CmPmIntervalTyperead-onlycurrent
f3NetFlowPointThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.43.2.6.1.3VariablePointerread-onlycurrent
f3NetFlowPointThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.6.1.4Unsigned32read-writecurrent
f3NetFlowPointThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.6.1.5Unsigned32read-writecurrent
f3NetFlowPointThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3NetFlowPointThresholdVariable.
1.3.6.1.4.1.2544.1.12.43.2.6.1.6Counter64read-onlycurrent
f3MPFlowStatsTable
OBJECT-TYPE
A collection of MP Flow statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.43.2.7not-accessiblecurrent
f3MPFlowStatsEntry
OBJECT-TYPE
A conceptual row in the f3MPFlowStatsTable. Entries exist in this table for each MP Flow.
1.3.6.1.4.1.2544.1.12.43.2.7.1not-accessiblecurrent
f3MPFlowStatsIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this MP Flow statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.43.2.7.1.1Integer32 (1..65535)read-onlycurrent
f3MPFlowStatsIntervalType
OBJECT-TYPE
Interval over which Performance Monitoring data is collected.
1.3.6.1.4.1.2544.1.12.43.2.7.1.2CmPmIntervalTyperead-onlycurrent
f3MPFlowStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.7.1.3TruthValueread-onlycurrent
f3MPFlowStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.7.1.4CmPmBinActionread-writecurrent
f3MPFlowStatsFDStaticBlock
OBJECT-TYPE
Specifies current counter for number of frames discarded due to a static entry in Mac Table.
1.3.6.1.4.1.2544.1.12.43.2.7.1.5PerfCounter64read-onlycurrent
f3MPFlowStatsFDHairPin
OBJECT-TYPE
Specifies current counter for number of frames discarded because destination Port is the ingress flowpoint or destination Port is in the same Split Horizon Group.
1.3.6.1.4.1.2544.1.12.43.2.7.1.6PerfCounter64read-onlycurrent
f3MPFlowStatsMacTableDiscards
OBJECT-TYPE
Specifies current counter for total number of MAC Table entries that have been or would have been learned, but have been failed due to a lack of storage space in the Filtering Database.
1.3.6.1.4.1.2544.1.12.43.2.7.1.7PerfCounter64read-onlycurrent
f3MPFlowStatsFDProtLearn
OBJECT-TYPE
Specifies current counter for number of frames dropped - protection learning.
1.3.6.1.4.1.2544.1.12.43.2.7.1.8PerfCounter64read-onlycurrent
f3MPFlowHistoryTable
OBJECT-TYPE
A collection of MP Flow statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.43.2.8not-accessiblecurrent
f3MPFlowHistoryEntry
OBJECT-TYPE
A conceptual row in the f3MPFlowHistoryTable. Entries exist in this table for each MP Flow.
1.3.6.1.4.1.2544.1.12.43.2.8.1not-accessiblecurrent
f3MPFlowHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this MP Flow History statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
1.3.6.1.4.1.2544.1.12.43.2.8.1.1Integer32 (1..65535)read-onlycurrent
f3MPFlowHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.43.2.8.1.2DateAndTimeread-onlycurrent
f3MPFlowHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.8.1.3TruthValueread-onlycurrent
f3MPFlowHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.8.1.4CmPmBinActionread-writecurrent
f3MPFlowHistoryFDStaticBlock
OBJECT-TYPE
Specifies history bin for number of frames discarded due to a static entry in Mac Table.
1.3.6.1.4.1.2544.1.12.43.2.8.1.5PerfCounter64read-onlycurrent
f3MPFlowHistoryFDHairPin
OBJECT-TYPE
Specifies history bin for number of frames discarded because destination Port is the ingress flowpoint or destination Port is in the same Split Horizon Group.
1.3.6.1.4.1.2544.1.12.43.2.8.1.6PerfCounter64read-onlycurrent
f3MPFlowHistoryMacTableDiscards
OBJECT-TYPE
Specifies history bin for total number of MAC Table entries that have been or would have been learned, but have been failed due to a lack of storage space in the Filtering Database.
1.3.6.1.4.1.2544.1.12.43.2.8.1.7PerfCounter64read-onlycurrent
f3MPFlowHistoryFDProtLearn
OBJECT-TYPE
Specifies history bin for total number of frames dropped - protection learning.
1.3.6.1.4.1.2544.1.12.43.2.8.1.8PerfCounter64read-onlycurrent
f3MPFlowThresholdTable
OBJECT-TYPE
A table of entries that allow manageability of MP Flow Thresholds.
1.3.6.1.4.1.2544.1.12.43.2.9not-accessiblecurrent
f3MPFlowThresholdEntry
OBJECT-TYPE
A conceptual row in the f3MPFlowThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.9.1not-accessiblecurrent
f3MPFlowThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3MPFlowThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.9.1.1Integer32 (1..65535)read-onlycurrent
f3MPFlowThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.43.2.9.1.2CmPmIntervalTyperead-onlycurrent
f3MPFlowThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.43.2.9.1.3VariablePointerread-onlycurrent
f3MPFlowThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.9.1.4Unsigned32read-writecurrent
f3MPFlowThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.9.1.5Unsigned32read-writecurrent
f3MPFlowThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3MPFlowThresholdVariable.
1.3.6.1.4.1.2544.1.12.43.2.9.1.6Counter64read-onlycurrent
f3AccFpQosShaperStatsTable
OBJECT-TYPE
A collection of Acc FlowPoint QOS Shaper statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.43.2.10not-accessiblecurrent
f3AccFpQosShaperStatsEntry
OBJECT-TYPE
A conceptual row in the f3AccFpQosShaperStatsTable. Entries exist in this table for each FlowPoint QoS Shaper.
1.3.6.1.4.1.2544.1.12.43.2.10.1not-accessiblecurrent
f3AccFpQosShaperStatsIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
1.3.6.1.4.1.2544.1.12.43.2.10.1.1Integer32 (1..65535)read-onlycurrent
f3AccFpQosShaperStatsIntervalType
OBJECT-TYPE
Interval over which Performance Monitoring data is collected.
1.3.6.1.4.1.2544.1.12.43.2.10.1.2CmPmIntervalTyperead-onlycurrent
f3AccFpQosShaperStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.10.1.3TruthValueread-onlycurrent
f3AccFpQosShaperStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.10.1.4CmPmBinActionread-writecurrent
f3AccFpQosShaperStatsBT
OBJECT-TYPE
Bytes Transmitted.
1.3.6.1.4.1.2544.1.12.43.2.10.1.5PerfCounter64read-onlycurrent
f3AccFpQosShaperStatsBTD
OBJECT-TYPE
Bytes Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.10.1.6PerfCounter64read-onlycurrent
f3AccFpQosShaperStatsFD
OBJECT-TYPE
Frames Dequeued.
1.3.6.1.4.1.2544.1.12.43.2.10.1.7PerfCounter64read-onlycurrent
f3AccFpQosShaperStatsFTD
OBJECT-TYPE
Frames Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.10.1.8PerfCounter64read-onlycurrent
f3AccFpQosShaperStatsABRRL
OBJECT-TYPE
Average Bit Rate - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.10.1.9PerfCounter64read-onlycurrent
f3AccFpQosShaperStatsBREDD
OBJECT-TYPE
Bytes Random Early Discard, Dropped.
1.3.6.1.4.1.2544.1.12.43.2.10.1.10PerfCounter64read-onlycurrent
f3AccFpQosShaperStatsFREDD
OBJECT-TYPE
Frames Random Early Discard, Dropped.
1.3.6.1.4.1.2544.1.12.43.2.10.1.11PerfCounter64read-onlycurrent
f3AccFpQosShaperHistoryTable
OBJECT-TYPE
A collection of Acc FlowPoint QOS Shaper statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.43.2.11not-accessiblecurrent
f3AccFpQosShaperHistoryEntry
OBJECT-TYPE
A conceptual row in the f3AccFpQosShaperHistoryTable. Entries exist in this table for each FlowPoint QoS Shaper.
1.3.6.1.4.1.2544.1.12.43.2.11.1not-accessiblecurrent
f3AccFpQosShaperHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry.
1.3.6.1.4.1.2544.1.12.43.2.11.1.1Integer32 (1..65535)read-onlycurrent
f3AccFpQosShaperHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.43.2.11.1.2DateAndTimeread-onlycurrent
f3AccFpQosShaperHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.11.1.3TruthValueread-onlycurrent
f3AccFpQosShaperHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.11.1.4CmPmBinActionread-writecurrent
f3AccFpQosShaperHistoryBT
OBJECT-TYPE
Bytes Transmitted.
1.3.6.1.4.1.2544.1.12.43.2.11.1.5PerfCounter64read-onlycurrent
f3AccFpQosShaperHistoryBTD
OBJECT-TYPE
Bytes Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.11.1.6PerfCounter64read-onlycurrent
f3AccFpQosShaperHistoryFD
OBJECT-TYPE
Frames Dequeued.
1.3.6.1.4.1.2544.1.12.43.2.11.1.7PerfCounter64read-onlycurrent
f3AccFpQosShaperHistoryFTD
OBJECT-TYPE
Frames Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.11.1.8PerfCounter64read-onlycurrent
f3AccFpQosShaperHistoryABRRL
OBJECT-TYPE
Average Bit Rate - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.11.1.9PerfCounter64read-onlycurrent
f3AccFpQosShaperHistoryBREDD
OBJECT-TYPE
Bytes Random Early Discard, Dropped.
1.3.6.1.4.1.2544.1.12.43.2.11.1.10PerfCounter64read-onlycurrent
f3AccFpQosShaperHistoryFREDD
OBJECT-TYPE
Frames Random Early Discard, Dropped.
1.3.6.1.4.1.2544.1.12.43.2.11.1.11PerfCounter64read-onlycurrent
f3AccFpQosShaperThresholdTable
OBJECT-TYPE
A table of entries that allow manageability of Acc FlowPoint QoS Shaper Thresholds.
1.3.6.1.4.1.2544.1.12.43.2.12not-accessiblecurrent
f3AccFpQosShaperThresholdEntry
OBJECT-TYPE
A conceptual row in the f3AccFpQosShaperThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.12.1not-accessiblecurrent
f3AccFpQosShaperThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3AccFpQosShaperThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.12.1.1Integer32 (1..65535)read-onlycurrent
f3AccFpQosShaperThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.43.2.12.1.2CmPmIntervalTyperead-onlycurrent
f3AccFpQosShaperThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.43.2.12.1.3VariablePointerread-onlycurrent
f3AccFpQosShaperThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.12.1.4Unsigned32read-writecurrent
f3AccFpQosShaperThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.12.1.5Unsigned32read-writecurrent
f3AccFpQosShaperThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3AccFpQosShaperThresholdVariable.
1.3.6.1.4.1.2544.1.12.43.2.12.1.6Counter64read-onlycurrent
f3NetFpQosShaperStatsTable
OBJECT-TYPE
A collection of Net FlowPoint QOS Shaper statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.43.2.13not-accessiblecurrent
f3NetFpQosShaperStatsEntry
OBJECT-TYPE
A conceptual row in the f3NetFpQosShaperStatsTable. Entries exist in this table for each FlowPoint QoS Shaper.
1.3.6.1.4.1.2544.1.12.43.2.13.1not-accessiblecurrent
f3NetFpQosShaperStatsIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
1.3.6.1.4.1.2544.1.12.43.2.13.1.1Integer32 (1..65535)read-onlycurrent
f3NetFpQosShaperStatsIntervalType
OBJECT-TYPE
Interval over which Performance Monitoring data is collected.
1.3.6.1.4.1.2544.1.12.43.2.13.1.2CmPmIntervalTyperead-onlycurrent
f3NetFpQosShaperStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.13.1.3TruthValueread-onlycurrent
f3NetFpQosShaperStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.13.1.4CmPmBinActionread-writecurrent
f3NetFpQosShaperStatsBT
OBJECT-TYPE
Bytes Transmitted.
1.3.6.1.4.1.2544.1.12.43.2.13.1.5PerfCounter64read-onlycurrent
f3NetFpQosShaperStatsBTD
OBJECT-TYPE
Bytes Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.13.1.6PerfCounter64read-onlycurrent
f3NetFpQosShaperStatsFD
OBJECT-TYPE
Frames Dequeued.
1.3.6.1.4.1.2544.1.12.43.2.13.1.7PerfCounter64read-onlycurrent
f3NetFpQosShaperStatsFTD
OBJECT-TYPE
Frames Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.13.1.8PerfCounter64read-onlycurrent
f3NetFpQosShaperStatsABRRL
OBJECT-TYPE
Average Bit Rate - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.13.1.9PerfCounter64read-onlycurrent
f3NetFpQosShaperStatsBREDD
OBJECT-TYPE
Bytes Random Early Discard, Dropped.
1.3.6.1.4.1.2544.1.12.43.2.13.1.10PerfCounter64read-onlycurrent
f3NetFpQosShaperStatsFREDD
OBJECT-TYPE
Frames Random Early Discard, Dropped.
1.3.6.1.4.1.2544.1.12.43.2.13.1.11PerfCounter64read-onlycurrent
f3NetFpQosShaperHistoryTable
OBJECT-TYPE
A collection of Net FlowPoint QOS Shaper statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.43.2.14not-accessiblecurrent
f3NetFpQosShaperHistoryEntry
OBJECT-TYPE
A conceptual row in the f3NetFpQosShaperHistoryTable. Entries exist in this table for each FlowPoint QoS Shaper.
1.3.6.1.4.1.2544.1.12.43.2.14.1not-accessiblecurrent
f3NetFpQosShaperHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry.
1.3.6.1.4.1.2544.1.12.43.2.14.1.1Integer32 (1..65535)read-onlycurrent
f3NetFpQosShaperHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.43.2.14.1.2DateAndTimeread-onlycurrent
f3NetFpQosShaperHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.14.1.3TruthValueread-onlycurrent
f3NetFpQosShaperHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.14.1.4CmPmBinActionread-writecurrent
f3NetFpQosShaperHistoryBT
OBJECT-TYPE
Bytes Transmitted.
1.3.6.1.4.1.2544.1.12.43.2.14.1.5PerfCounter64read-onlycurrent
f3NetFpQosShaperHistoryBTD
OBJECT-TYPE
Bytes Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.14.1.6PerfCounter64read-onlycurrent
f3NetFpQosShaperHistoryFD
OBJECT-TYPE
Frames Dequeued.
1.3.6.1.4.1.2544.1.12.43.2.14.1.7PerfCounter64read-onlycurrent
f3NetFpQosShaperHistoryFTD
OBJECT-TYPE
Frames Tail Dropped.
1.3.6.1.4.1.2544.1.12.43.2.14.1.8PerfCounter64read-onlycurrent
f3NetFpQosShaperHistoryABRRL
OBJECT-TYPE
Average Bit Rate - Rate Limited.
1.3.6.1.4.1.2544.1.12.43.2.14.1.9PerfCounter64read-onlycurrent
f3NetFpQosShaperHistoryBREDD
OBJECT-TYPE
Bytes Random Early Discard, Dropped.
1.3.6.1.4.1.2544.1.12.43.2.14.1.10PerfCounter64read-onlycurrent
f3NetFpQosShaperHistoryFREDD
OBJECT-TYPE
Frames Random Early Discard, Dropped.
1.3.6.1.4.1.2544.1.12.43.2.14.1.11PerfCounter64read-onlycurrent
f3NetFpQosShaperThresholdTable
OBJECT-TYPE
A table of entries that allow manageability of Net FlowPoint QoS Shaper Thresholds.
1.3.6.1.4.1.2544.1.12.43.2.15not-accessiblecurrent
f3NetFpQosShaperThresholdEntry
OBJECT-TYPE
A conceptual row in the f3NetFpQosShaperThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.15.1not-accessiblecurrent
f3NetFpQosShaperThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3NetFpQosShaperThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.15.1.1Integer32 (1..65535)read-onlycurrent
f3NetFpQosShaperThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.43.2.15.1.2CmPmIntervalTyperead-onlycurrent
f3NetFpQosShaperThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.43.2.15.1.3VariablePointerread-onlycurrent
f3NetFpQosShaperThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.15.1.4Unsigned32read-writecurrent
f3NetFpQosShaperThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.15.1.5Unsigned32read-writecurrent
f3NetFpQosShaperThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3NetFpQosShaperThresholdVariable.
1.3.6.1.4.1.2544.1.12.43.2.15.1.6Counter64read-onlycurrent
f3AccFpQosPolicerStatsTable
OBJECT-TYPE
A collection of Acc FlowPoint QOS Policer statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.43.2.16not-accessiblecurrent
f3AccFpQosPolicerStatsEntry
OBJECT-TYPE
A conceptual row in the f3AccFpQosPolicerStatsTable. Entries exist in this table for each Acc FlowPoint QoS Policer.
1.3.6.1.4.1.2544.1.12.43.2.16.1not-accessiblecurrent
f3AccFpQosPolicerStatsIndex
OBJECT-TYPE
An integer index value used to uniquely identify this QOS Policer statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
1.3.6.1.4.1.2544.1.12.43.2.16.1.1Integer32 (1..65535)read-onlycurrent
f3AccFpQosPolicerStatsIntervalType
OBJECT-TYPE
Interval over which Performance Monitoring data is collected.
1.3.6.1.4.1.2544.1.12.43.2.16.1.2CmPmIntervalTyperead-onlycurrent
f3AccFpQosPolicerStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.16.1.3TruthValueread-onlycurrent
f3AccFpQosPolicerStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.16.1.4CmPmBinActionread-writecurrent
f3AccFpQosPolicerStatsFMG
OBJECT-TYPE
Frames Marked Green.
1.3.6.1.4.1.2544.1.12.43.2.16.1.5PerfCounter64read-onlycurrent
f3AccFpQosPolicerStatsFMY
OBJECT-TYPE
Frames Marked Yellow.
1.3.6.1.4.1.2544.1.12.43.2.16.1.6PerfCounter64read-onlycurrent
f3AccFpQosPolicerStatsFMRD
OBJECT-TYPE
Frames Marked Red and Discarded.
1.3.6.1.4.1.2544.1.12.43.2.16.1.7PerfCounter64read-onlycurrent
f3AccFpQosPolicerStatsBytesIn
OBJECT-TYPE
Number of bytes received by the Policer.
1.3.6.1.4.1.2544.1.12.43.2.16.1.8PerfCounter64read-onlycurrent
f3AccFpQosPolicerStatsBytesOut
OBJECT-TYPE
Number of bytes transmitted by the Policer.
1.3.6.1.4.1.2544.1.12.43.2.16.1.9PerfCounter64read-onlycurrent
f3AccFpQosPolicerStatsABR
OBJECT-TYPE
Average Bit Rate on the Policer.
1.3.6.1.4.1.2544.1.12.43.2.16.1.10PerfCounter64read-onlycurrent
f3AccFpQosPolicerHistoryTable
OBJECT-TYPE
A collection of Acc FlowPoint QOS Policer statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.43.2.17not-accessiblecurrent
f3AccFpQosPolicerHistoryEntry
OBJECT-TYPE
A conceptual row in the f3AccFpQosPolicerHistoryTable. Entries exist in this table for each Acc FlowPoint QoS Policer.
1.3.6.1.4.1.2544.1.12.43.2.17.1not-accessiblecurrent
f3AccFpQosPolicerHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this QOS Policer history entry.
1.3.6.1.4.1.2544.1.12.43.2.17.1.1Integer32 (1..65535)read-onlycurrent
f3AccFpQosPolicerHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.43.2.17.1.2DateAndTimeread-onlycurrent
f3AccFpQosPolicerHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.17.1.3TruthValueread-onlycurrent
f3AccFpQosPolicerHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.17.1.4CmPmBinActionread-writecurrent
f3AccFpQosPolicerHistoryFMG
OBJECT-TYPE
Frames Marked Green.
1.3.6.1.4.1.2544.1.12.43.2.17.1.5PerfCounter64read-onlycurrent
f3AccFpQosPolicerHistoryFMY
OBJECT-TYPE
Frames Marked Yellow.
1.3.6.1.4.1.2544.1.12.43.2.17.1.6PerfCounter64read-onlycurrent
f3AccFpQosPolicerHistoryFMRD
OBJECT-TYPE
Frames Marked Red and Discarded.
1.3.6.1.4.1.2544.1.12.43.2.17.1.7PerfCounter64read-onlycurrent
f3AccFpQosPolicerHistoryBytesIn
OBJECT-TYPE
Number of bytes received by the Policer.
1.3.6.1.4.1.2544.1.12.43.2.17.1.8PerfCounter64read-onlycurrent
f3AccFpQosPolicerHistoryBytesOut
OBJECT-TYPE
Number of bytes transmitted by the Policer.
1.3.6.1.4.1.2544.1.12.43.2.17.1.9PerfCounter64read-onlycurrent
f3AccFpQosPolicerHistoryABR
OBJECT-TYPE
Average Bit Rate on the Policer.
1.3.6.1.4.1.2544.1.12.43.2.17.1.10PerfCounter64read-onlycurrent
f3AccFpQosPolicerThresholdTable
OBJECT-TYPE
A table of entries that allow manageability of QOS Policer Thresholds.
1.3.6.1.4.1.2544.1.12.43.2.18not-accessiblecurrent
f3AccFpQosPolicerThresholdEntry
OBJECT-TYPE
A conceptual row in the f3AccFpQosPolicerThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.18.1not-accessiblecurrent
f3AccFpQosPolicerThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3AccFpQosPolicerThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.18.1.1Integer32 (1..65535)read-onlycurrent
f3AccFpQosPolicerThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.43.2.18.1.2CmPmIntervalTyperead-onlycurrent
f3AccFpQosPolicerThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.43.2.18.1.3VariablePointerread-onlycurrent
f3AccFpQosPolicerThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.18.1.4Unsigned32read-writecurrent
f3AccFpQosPolicerThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.18.1.5Unsigned32read-writecurrent
f3AccFpQosPolicerThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3AccFpQosPolicerThresholdVariable.
1.3.6.1.4.1.2544.1.12.43.2.18.1.6Counter64read-onlycurrent
f3NetFpQosPolicerStatsTable
OBJECT-TYPE
A collection of Net FlowPoint QOS Policer statistics. These reflect the current data.
1.3.6.1.4.1.2544.1.12.43.2.19not-accessiblecurrent
f3NetFpQosPolicerStatsEntry
OBJECT-TYPE
A conceptual row in the f3NetFpQosPolicerStatsTable. Entries exist in this table for each Net FlowPoint QoS Policer.
1.3.6.1.4.1.2544.1.12.43.2.19.1not-accessiblecurrent
f3NetFpQosPolicerStatsIndex
OBJECT-TYPE
An integer index value used to uniquely identify this QOS Policer statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
1.3.6.1.4.1.2544.1.12.43.2.19.1.1Integer32 (1..65535)read-onlycurrent
f3NetFpQosPolicerStatsIntervalType
OBJECT-TYPE
Interval over which Performance Monitoring data is collected.
1.3.6.1.4.1.2544.1.12.43.2.19.1.2CmPmIntervalTyperead-onlycurrent
f3NetFpQosPolicerStatsValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.19.1.3TruthValueread-onlycurrent
f3NetFpQosPolicerStatsAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.19.1.4CmPmBinActionread-writecurrent
f3NetFpQosPolicerStatsFMG
OBJECT-TYPE
Frames Marked Green.
1.3.6.1.4.1.2544.1.12.43.2.19.1.5PerfCounter64read-onlycurrent
f3NetFpQosPolicerStatsFMY
OBJECT-TYPE
Frames Marked Yellow.
1.3.6.1.4.1.2544.1.12.43.2.19.1.6PerfCounter64read-onlycurrent
f3NetFpQosPolicerStatsFMRD
OBJECT-TYPE
Frames Marked Red and Discarded.
1.3.6.1.4.1.2544.1.12.43.2.19.1.7PerfCounter64read-onlycurrent
f3NetFpQosPolicerStatsBytesIn
OBJECT-TYPE
Number of bytes received by the Policer.
1.3.6.1.4.1.2544.1.12.43.2.19.1.8PerfCounter64read-onlycurrent
f3NetFpQosPolicerStatsBytesOut
OBJECT-TYPE
Number of bytes transmitted by the Policer.
1.3.6.1.4.1.2544.1.12.43.2.19.1.9PerfCounter64read-onlycurrent
f3NetFpQosPolicerStatsABR
OBJECT-TYPE
Average Bit Rate on the Policer.
1.3.6.1.4.1.2544.1.12.43.2.19.1.10PerfCounter64read-onlycurrent
f3NetFpQosPolicerHistoryTable
OBJECT-TYPE
A collection of Net FlowPoint QOS Policer statistics. These reflect the history data.
1.3.6.1.4.1.2544.1.12.43.2.20not-accessiblecurrent
f3NetFpQosPolicerHistoryEntry
OBJECT-TYPE
A conceptual row in the f3NetFpQosPolicerHistoryTable. Entries exist in this table for each Net FlowPoint QoS Policer.
1.3.6.1.4.1.2544.1.12.43.2.20.1not-accessiblecurrent
f3NetFpQosPolicerHistoryIndex
OBJECT-TYPE
An arbitrary integer index value used to uniquely identify this QOS Policer history entry.
1.3.6.1.4.1.2544.1.12.43.2.20.1.1Integer32 (1..65535)read-onlycurrent
f3NetFpQosPolicerHistoryTime
OBJECT-TYPE
Indicates the time of history bin creation.
1.3.6.1.4.1.2544.1.12.43.2.20.1.2DateAndTimeread-onlycurrent
f3NetFpQosPolicerHistoryValid
OBJECT-TYPE
Indicates the validity of the bin.
1.3.6.1.4.1.2544.1.12.43.2.20.1.3TruthValueread-onlycurrent
f3NetFpQosPolicerHistoryAction
OBJECT-TYPE
Allows the Manager to clear the bin.
1.3.6.1.4.1.2544.1.12.43.2.20.1.4CmPmBinActionread-writecurrent
f3NetFpQosPolicerHistoryFMG
OBJECT-TYPE
Frames Marked Green.
1.3.6.1.4.1.2544.1.12.43.2.20.1.5PerfCounter64read-onlycurrent
f3NetFpQosPolicerHistoryFMY
OBJECT-TYPE
Frames Marked Yellow.
1.3.6.1.4.1.2544.1.12.43.2.20.1.6PerfCounter64read-onlycurrent
f3NetFpQosPolicerHistoryFMRD
OBJECT-TYPE
Frames Marked Red and Discarded.
1.3.6.1.4.1.2544.1.12.43.2.20.1.7PerfCounter64read-onlycurrent
f3NetFpQosPolicerHistoryBytesIn
OBJECT-TYPE
Number of bytes received by the Policer.
1.3.6.1.4.1.2544.1.12.43.2.20.1.8PerfCounter64read-onlycurrent
f3NetFpQosPolicerHistoryBytesOut
OBJECT-TYPE
Number of bytes transmitted by the Policer.
1.3.6.1.4.1.2544.1.12.43.2.20.1.9PerfCounter64read-onlycurrent
f3NetFpQosPolicerHistoryABR
OBJECT-TYPE
Average Bit Rate on the Policer.
1.3.6.1.4.1.2544.1.12.43.2.20.1.10PerfCounter64read-onlycurrent
f3NetFpQosPolicerThresholdTable
OBJECT-TYPE
A table of entries that allow manageability of QOS Policer Thresholds.
1.3.6.1.4.1.2544.1.12.43.2.21not-accessiblecurrent
f3NetFpQosPolicerThresholdEntry
OBJECT-TYPE
A conceptual row in the f3NetFpQosPolicerThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.21.1not-accessiblecurrent
f3NetFpQosPolicerThresholdIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the f3NetFpQosPolicerThresholdTable.
1.3.6.1.4.1.2544.1.12.43.2.21.1.1Integer32 (1..65535)read-onlycurrent
f3NetFpQosPolicerThresholdInterval
OBJECT-TYPE
The interval over which monitored value is sampled and compared with the specified threshold.
1.3.6.1.4.1.2544.1.12.43.2.21.1.2CmPmIntervalTyperead-onlycurrent
f3NetFpQosPolicerThresholdVariable
OBJECT-TYPE
The object identifier of the particular variable to be sampled.
1.3.6.1.4.1.2544.1.12.43.2.21.1.3VariablePointerread-onlycurrent
f3NetFpQosPolicerThresholdValueLo
OBJECT-TYPE
Lower 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.21.1.4Unsigned32read-writecurrent
f3NetFpQosPolicerThresholdValueHi
OBJECT-TYPE
Higher 32 bits of the threshold value.
1.3.6.1.4.1.2544.1.12.43.2.21.1.5Unsigned32read-writecurrent
f3NetFpQosPolicerThresholdMonValue
OBJECT-TYPE
Monitored value corresponding to f3NetFpQosPolicerThresholdVariable.
1.3.6.1.4.1.2544.1.12.43.2.21.1.6Counter64read-onlycurrent
f3FpmPerfNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.43.3
f3FpmConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.43.4
f3FpmCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.43.4.1
f3FpmGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.12.43.4.2

Notifications

NameOIDStatus
f3AccFlowPointThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an Ethernet Access Port FlowPoint is crossed.
1.3.6.1.4.1.2544.1.12.43.3.1current
f3NetFlowPointThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an Ethernet Network Port FlowPoint is crossed.
1.3.6.1.4.1.2544.1.12.43.3.2current
f3MPFlowThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an MP Flow is crossed.
1.3.6.1.4.1.2544.1.12.43.3.3current
f3AccFpQosShaperThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an Acc FlowPoint QoS Shaper is crossed.
1.3.6.1.4.1.2544.1.12.43.3.4current
f3NetFpQosShaperThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an Net FlowPoint QoS Shaper is crossed.
1.3.6.1.4.1.2544.1.12.43.3.5current
f3AccFpQosPolicerThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an Acc FlowPoint QoS Policer is crossed.
1.3.6.1.4.1.2544.1.12.43.3.6current
f3NetFpQosPolicerThresholdCrossingAlert
NOTIFICATION-TYPE
This trap is sent each time a threshold on a PM condition on an Net FlowPoint QoS Policer is crossed.
1.3.6.1.4.1.2544.1.12.43.3.7current

Conformance

NameOIDStatus
f3FpmCompliance
MODULE-COMPLIANCE
Describes the requirements for conformance to the F3-FPM-MIB compilance.
1.3.6.1.4.1.2544.1.12.43.4.1.1current
f3AccFlowPointGroup
OBJECT-GROUP
A collection of Access Flow Point objects.
1.3.6.1.4.1.2544.1.12.43.4.2.1current
f3AccFpQosShaperGroup
OBJECT-GROUP
A collection of Access Flow Point QoS Shaper objects.
1.3.6.1.4.1.2544.1.12.43.4.2.2current
f3AccFpQosPolicerGroup
OBJECT-GROUP
A collection of Access Flow Point QoS Policer objects.
1.3.6.1.4.1.2544.1.12.43.4.2.3current
f3MPFlowExtGroup
OBJECT-GROUP
A collection of MP Flow objects.
1.3.6.1.4.1.2544.1.12.43.4.2.4current
f3AccFlowPointCpdV2Group
OBJECT-GROUP
A collection of Access Flow Point CDPV2 objects.
1.3.6.1.4.1.2544.1.12.43.4.2.5current
f3AccFlowPointLearningConfigGroup
OBJECT-GROUP
A collection of Access Flowpoint Learning Config objects.
1.3.6.1.4.1.2544.1.12.43.4.2.6current
f3NetFlowPointGroup
OBJECT-GROUP
A collection of Network Flow Point objects.
1.3.6.1.4.1.2544.1.12.43.4.2.7current
f3NetFpQosShaperGroup
OBJECT-GROUP
A collection of Network Flow Point QoS Shaper objects.
1.3.6.1.4.1.2544.1.12.43.4.2.8current
f3NetFpQosPolicerGroup
OBJECT-GROUP
A collection of Network Flow Point QoS Policer objects.
1.3.6.1.4.1.2544.1.12.43.4.2.9current
f3NetFlowPointCpdV2Group
OBJECT-GROUP
A collection of Network Flow Point CDPV2 objects.
1.3.6.1.4.1.2544.1.12.43.4.2.10current
f3NetFlowPointLearningConfigGroup
OBJECT-GROUP
A collection of Network Flowpoint Learning Config objects.
1.3.6.1.4.1.2544.1.12.43.4.2.11current
f3AccFlowPointPerfGroup
OBJECT-GROUP
A collection of Access Flowpoint Performance objects.
1.3.6.1.4.1.2544.1.12.43.4.2.12current
f3NetFlowPointPerfGroup
OBJECT-GROUP
A collection of Network Flowpoint Performance objects.
1.3.6.1.4.1.2544.1.12.43.4.2.13current
f3MPFlowPerfGroup
OBJECT-GROUP
A collection of MP Flow Performance objects.
1.3.6.1.4.1.2544.1.12.43.4.2.14current
f3AccFpQosShaperPerfGroup
OBJECT-GROUP
A collection of Acc FlowPoint QoS Shaper Performance objects.
1.3.6.1.4.1.2544.1.12.43.4.2.15current
f3NetFpQosShaperPerfGroup
OBJECT-GROUP
A collection of Net FlowPoint QoS Shaper Performance objects.
1.3.6.1.4.1.2544.1.12.43.4.2.16current
f3AccFpQosPolicerPerfGroup
OBJECT-GROUP
A collection of Acc FlowPoint QoS Policer Performance objects.
1.3.6.1.4.1.2544.1.12.43.4.2.17current
f3NetFpQosPolicerPerfGroup
OBJECT-GROUP
A collection of Net FlowPoint QoS Policer Performance objects.
1.3.6.1.4.1.2544.1.12.43.4.2.18current
f3FpmPerfNotifGroup
NOTIFICATION-GROUP
A collection of notifications related to FSP150CC Threshold Crossing Alerts.
1.3.6.1.4.1.2544.1.12.43.4.2.19current