F3-PTP-MIB
- Registered at
- 1.3.6.1.4.1.2544.1.12.18
- Last updated
- 2020-02-10 00:00
- Organization
- ADVA Optical Networking SE
- Revisions
- 2020-02-10 00:00
- Namespace
- adva
- Source file
F3-PTP-MIB- Digest
sha256:33f0e43e23f92ab561d1ce1ccb1793af80832207274c0d60b53a8ff9dc3eaea1
Description
This module defines the 1588 PTP MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
Contact
Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199
Imports
| From | Symbols |
|---|---|
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | AdminState, CmPmBinAction, CmPmIntervalType, F3DisplayString, FlowSecState, IpPriorityMapMode, IpVersion, OperationalState, PerfCounter64, SecondaryState |
| CM-ENTITY-MIB | neIndex, shelfIndex, slotIndex |
| CM-FACILITY-MIB | cmEthernetAccPortEntry, cmEthernetAccPortIndex, cmEthernetNetPortEntry, cmEthernetNetPortIndex, cmEthernetTrafficPortEntry, cmEthernetTrafficPortIndex |
| CM-REDUNDANCY-MIB | CmGenPgSwitchoverReason |
| F3-SYNC-MIB | HoldoverAccuracy, SSMQualityLevel, TimeSource |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ADVA-MIB CM-COMMON-MIB CM-ENTITY-MIB CM-FACILITY-MIB CM-REDUNDANCY-MIB CM-SYSTEM-MIB ENTITY-MIB F3-LAG-MIB F3-PTP-MIB F3-SYNC-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB IPV6-TC LLDP-V2-MIB LLDP-V2-TC-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMP-TARGET-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AnnounceMessageRate TEXTUAL-CONVENTION Enumerations for g8275.1 Announce Message Rate. | current | |||
| AnnounceMsgRate TEXTUAL-CONVENTION Enumerations for 1588 Announce Message Rate. | current | |||
| BMCARole TEXTUAL-CONVENTION Enumerations for g8275.1 BMCA Role. | current | |||
| ClockClassProfile TEXTUAL-CONVENTION Enumerations for Master Clock Interface the Clock Class Profile. | current | |||
| ClockIdentity TEXTUAL-CONVENTION 1588 Clock Identity. | current | |||
| ClockRecoveryMode TEXTUAL-CONVENTION Enumerations for 1588 Clock Recovery Mode. | current | |||
| ClockRecoveryState TEXTUAL-CONVENTION Enumerations for 1588 Clock Recovery State. | current | |||
| CompensationMode TEXTUAL-CONVENTION Enumerations for Compensation Mode. | current | |||
| CompensationStatus TEXTUAL-CONVENTION Enumerations for Compensation Status. | current | |||
| DelayMechanism TEXTUAL-CONVENTION Enumerations for Delay Mechanism. | current | |||
| DelayReqMessageRate TEXTUAL-CONVENTION Enumerations for g8275.1 Delay Req Message Rate. | current | |||
| DelayReqMsgRate TEXTUAL-CONVENTION Enumerations for 1588 Delay Request Message Rate. | current | |||
| DelayRespMsgRate TEXTUAL-CONVENTION Enumerations for 1588 Delay Response Message Rate. | current | |||
| DestMacAddrType TEXTUAL-CONVENTION Enumerations for Dest Mac Addr Type. | current | |||
| FreqRecoveryTarget TEXTUAL-CONVENTION Enumerations for Frequency Recovery Target. | current | |||
| MasterClockType TEXTUAL-CONVENTION Enumerations for Master Clock Type. | current | |||
| PTPClockOperMode TEXTUAL-CONVENTION Enumerations for PTP Clock Oper Mode. | current | |||
| PTPClockProfile TEXTUAL-CONVENTION Enumerations for PTP Clock Profile. | current | |||
| PTPClockType TEXTUAL-CONVENTION Enumerations for PTP Clock Type. | current | |||
| PTPPortType TEXTUAL-CONVENTION Enumerations for PTP Port Type. | current | |||
| PTPProfile TEXTUAL-CONVENTION Enumerations for Master Clock PTP Profile. | current | |||
| PTPProtectionState TEXTUAL-CONVENTION Enumerations for PTP Protection State. | current | |||
| PTPTransport TEXTUAL-CONVENTION Enumerations for Master Clock Interface PTP Transport Type. | current | |||
| PTPTransportMode TEXTUAL-CONVENTION Enumerations for Master Clock Interface PTP Transport mode. | current | |||
| PhaseRecoveryState TEXTUAL-CONVENTION Enumerations for Phase Recovery State. | current | |||
| PortIdentity TEXTUAL-CONVENTION 1588 Port Identity. | current | |||
| PtpFlowPointType TEXTUAL-CONVENTION Enumerations for PTP Flow Point Type. transparent - represents the 1588 Transparent clock type, oc-slave - represents a 1588 Ordinary Clock Slave clock type, monitoring - represents monitoring Flow Point, oc-master - represents a 1588 Ordinary Clock master clock type. | current | |||
| PtpPortState TEXTUAL-CONVENTION Enumerations for PTP Port State. | current | |||
| RemoteSlaveType TEXTUAL-CONVENTION Enumerations for Remote Slave Type. | current | |||
| ScaledNanoseconds TEXTUAL-CONVENTION Definition of scaled nanoseconds as specified by 1588v2. The most significant 48 bits represent nanoseconds and the least signifcant 16-bits represent sub-nanoseconds. The currently supported granularity is nanoseconds and the least significant 16 bits will always be 0. The 48-bits representing nanoseconds supports the range of [-2^47..2^47-1]. Negative values of nanonseconds are interpreted as two's complement. | current | |||
| SlaveMode TEXTUAL-CONVENTION Describes the PTP slave mode on OSA540X. | current | |||
| SyncMessageRate TEXTUAL-CONVENTION Enumerations for g8275.1 Sync Message Rate. | current | |||
| SyncMsgRate TEXTUAL-CONVENTION Enumerations for 1588 Sync Message Rate. | current | |||
| TimeScale TEXTUAL-CONVENTION | current | |||
| ToggleValue TEXTUAL-CONVENTION Enumerations for functionality that can be enabled or disabled. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| f3PtpConfigObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.18.1 | |||
| f3PtpTCTable OBJECT-TYPE A list of entries corresponding to the PTP Transparent Clock entities. | 1.3.6.1.4.1.2544.1.12.18.1.1 | not-accessible | current | |
| f3PtpTCEntry OBJECT-TYPE An entry containing information applicable to a particular Transparent Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.1.1 | not-accessible | current | |
| f3PtpTCIndex OBJECT-TYPE Unique index value associated with the Transparent Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.1 | Integer32 | not-accessible | current |
| f3PtpTCAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Transparent Clock entity. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpTCAdminState OBJECT-TYPE This object represents the Administrative State of the Transparent Clock. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.3 | AdminState | read-write | current |
| f3PtpTCOperationalState OBJECT-TYPE This object represents the Operational State of the Transparent Clock. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.4 | OperationalState | read-only | current |
| f3PtpTCSecondaryState OBJECT-TYPE This object represents the Secondary State of the Transparent Clock. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.5 | SecondaryState | read-only | current |
| f3PtpTCServiceFlow OBJECT-TYPE This object represents the Service(Traffic) Flow associated with the Transparent Clock. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.6 | VariablePointer | read-create | current |
| f3PtpTCDelayMechanism OBJECT-TYPE This object represents the Delay Mechanism of the Transparent Clock. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.7 | DelayMechanism | read-create | current |
| f3PtpTCSync OBJECT-TYPE This object provides the entry from the f3SyncTable, which is used as frequency clock for this Transparent Clock. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.8 | VariablePointer | read-create | current |
| f3PtpTCClockIdentity OBJECT-TYPE This object specifies the Clock Identity of the PTP Transparent Clock. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.9 | ClockIdentity | read-create | current |
| f3PtpTCStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.10 | StorageType | read-create | current |
| f3PtpTCRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpTCRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpTCRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpTCRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.1.1.11 | RowStatus | read-create | current |
| f3PtpTCPtpProfile OBJECT-TYPE This object represents whether Tc or T-Tc. | 1.3.6.1.4.1.2544.1.12.18.1.1.1.12 | PTPClockProfile | read-create | current |
| f3PtpTCVirtualPortTable OBJECT-TYPE A list of entries corresponding to the PTP Transparent Clock Virtual Ports. | 1.3.6.1.4.1.2544.1.12.18.1.2 | not-accessible | current | |
| f3PtpTCVirtualPortEntry OBJECT-TYPE An entry containing information applicable to a particular PTP TC Virtual Port Entity. | 1.3.6.1.4.1.2544.1.12.18.1.2.1 | not-accessible | current | |
| f3PtpTCVirtualPortIndex OBJECT-TYPE Unique index value associated with the PTP Transparent Clock Virtual Port index. | 1.3.6.1.4.1.2544.1.12.18.1.2.1.1 | Integer32 | not-accessible | current |
| f3PtpTCVirtualPortAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the PTP TC Virtual Port entity. | 1.3.6.1.4.1.2544.1.12.18.1.2.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpTCVirtualPortAdminState OBJECT-TYPE This object represents the Administrative State of the TC Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.2.1.3 | AdminState | read-write | current |
| f3PtpTCVirtualPortOperationalState OBJECT-TYPE This object represents the Operational State of the TC Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.2.1.4 | OperationalState | read-only | current |
| f3PtpTCVirtualPortSecondaryState OBJECT-TYPE This object represents the Secondary State of the TC Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.2.1.5 | SecondaryState | read-only | current |
| f3PtpTCVirtualPortIdentity OBJECT-TYPE This object represents the PTP Port Identity of the TC Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.2.1.6 | PortIdentity | read-write | current |
| f3PtpTCVirtualPortFlowPoint OBJECT-TYPE This object associates the PTP Flow Point with the Transparent Clock. | 1.3.6.1.4.1.2544.1.12.18.1.2.1.7 | VariablePointer | read-create | current |
| f3PtpTCVirtualPortStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.2.1.8 | StorageType | read-create | current |
| f3PtpTCVirtualPortRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpTCVirtualPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpTCVirtualPortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpTCVirtualPortRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.2.1.9 | RowStatus | read-create | current |
| f3PtpTSTable OBJECT-TYPE A list of entries corresponding to the PTP Telecom Slave entities. | 1.3.6.1.4.1.2544.1.12.18.1.3 | not-accessible | current | |
| f3PtpTSEntry OBJECT-TYPE An entry containing information applicable to a particular Telecom Slave Entity. | 1.3.6.1.4.1.2544.1.12.18.1.3.1 | not-accessible | current | |
| f3PtpTSIndex OBJECT-TYPE Unique index value associated with the Telecom Slave Entity. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.1 | Integer32 | not-accessible | current |
| f3PtpTSAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Telecom Slave entity. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpTSAdminState OBJECT-TYPE This object represents the Administrative State of the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.3 | AdminState | read-write | current |
| f3PtpTSOperationalState OBJECT-TYPE This object represents the Operational State of the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.4 | OperationalState | read-only | current |
| f3PtpTSSecondaryState OBJECT-TYPE This object represents the Secondary State of the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.5 | SecondaryState | read-only | current |
| f3PtpTSClockIdentity OBJECT-TYPE This object specifies the Clock Identity of the PTP Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.6 | ClockIdentity | read-create | current |
| f3PtpTSDomainNumber OBJECT-TYPE This object allows specification of the PTP domain number of the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.7 | Integer32 | read-write | current |
| f3PtpTSSync OBJECT-TYPE This object provides the entry from the f3SyncTable, which is used as frequency for this Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.8 | VariablePointer | read-create | current |
| f3PtpTSCurrentTOD OBJECT-TYPE This object allows specification of the Telecom Slave Current Time of Day. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.9 | DateAndTime | read-only | current |
| f3PtpTSSelectedPacketClock OBJECT-TYPE This object provides the Slave Only Ordinary Clock selected as the best source of Time Of Day. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.10 | VariablePointer | read-only | current |
| f3PtpTSClockRecoveryMode OBJECT-TYPE This object allows specification of whether the Clock Recovery Mode is one-way or two-way. In one-way mode, only Sync messages are used for frequency recovery. In two-way mode, both Sync and Delay Request-Response messages are used for measuring the mean path delay. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.11 | ClockRecoveryMode | read-create | current |
| f3PtpTSClockRecoveryState OBJECT-TYPE This object provides the Telecom Slave's clock recovery state. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.12 | ClockRecoveryState | read-only | current |
| f3PtpTSClockSyncEEnabled OBJECT-TYPE This object allows to specify whether the Telecom Slave can be enabled/disabled for Synchronous Ethernet. When enabled, on receive side -telecom slave can extract the frequency and pass the recovered clock to the system clock -QL is extracted (when QL is enabled) from the selected SOOC's clock class -telecom slave is eligible to be selected as a system clock reference When disabled, on receive side, -telecom slave does not pass the recovered clock to the system clock -telecom slave does not process the QL from selected SOOC's clock class -telecom slave is not eligible to be selected as a system clock reference. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.13 | TruthValue | read-write | current |
| f3PtpTSClockQLModeEnabled OBJECT-TYPE This object allows to specify whether the Telecom Slave can be enabled/disabled for QL Mode. When enabled, on receive side -telecom slave can extract the QL from selected SOOC's clock class When disabled, on receive side, -telecom slave does not process the QL from selected SOOC's clock class. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.14 | TruthValue | read-write | current |
| f3PtpTSClockExpectedQL OBJECT-TYPE This object allows to specify the expected QL when the Telecom Slave is enabled for QL Mode. This is applicable when f3PtpTSClockQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the Telecom Slave. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.15 | SSMQualityLevel | read-write | current |
| f3PtpTSClockAssumedQL OBJECT-TYPE This object allows to specify the assumed QL on the Telecom Slave. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the telecom slave's QL Mode is disabled and the telecom slave is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.16 | SSMQualityLevel | read-write | current |
| f3PtpTSClockReceivedQL OBJECT-TYPE This object provides the Received QL value for the Telecom Slave. If the Telecom Slave's QL Mode is disabled, then the received QL value is not applicable. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.17 | SSMQualityLevel | read-only | current |
| f3PtpTSStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.18 | StorageType | read-create | current |
| f3PtpTSRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpTSRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpTSRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpTSRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.3.1.19 | RowStatus | read-create | current |
| f3PtpTSTimeTraceabilityStatus OBJECT-TYPE This object provides the Time traceability status of the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.20 | TruthValue | read-only | current |
| f3PtpTSTimeSinceTimeTraceabilityChanged OBJECT-TYPE This object provides the time in seconds since the Time traceability changed on the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.21 | Unsigned32 | read-only | current |
| f3PtpTSFreqTraceabilityStatus OBJECT-TYPE This object provides the Frequency traceability status of the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.22 | TruthValue | read-only | current |
| f3PtpTSTimeSinceFreqTraceabilityChanged OBJECT-TYPE This object provides the time in seconds since the Frequency traceability changed on the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.23 | Unsigned32 | read-only | current |
| f3PtpTSFreqRecoveryTarget OBJECT-TYPE This object provides the frequency recovery target. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.24 | FreqRecoveryTarget | read-write | current |
| f3PtpTSCurrentCRScore OBJECT-TYPE This object provides the current Clock Recovery Score. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.25 | Unsigned32 | read-only | current |
| f3PtpTSTimeLastCRScore OBJECT-TYPE This object provides the time of the last Clock Recovery Score. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.26 | DateAndTime | read-only | current |
| f3PtpTSTargetPhaseRecoveryAccuracy OBJECT-TYPE This object allows specification of the expected Time of Day accuracy in nanoseconds. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.27 | Unsigned32 | read-write | current |
| f3PtpTSCurrentPRScore OBJECT-TYPE This object provides the current Phase Recovery Score. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.28 | Unsigned32 | read-only | current |
| f3PtpTSTimeLastPRScore OBJECT-TYPE This object provides the time of the last Phase Recovery Score. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.29 | DateAndTime | read-only | current |
| f3PtpTSClockClass OBJECT-TYPE This object specify Telecome Slave clock class. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.30 | Unsigned32 | read-only | deprecated |
| f3PtpTSClockAccuracy OBJECT-TYPE This object specify Telecome Slave clock accuracy. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.31 | Unsigned32 | read-only | current |
| f3PtpTSTimeSource OBJECT-TYPE This object specify Telecome Slave time source. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.32 | TimeSource | read-only | current |
| f3PtpTSPhaseRecoveryState OBJECT-TYPE This object specify the phase recovery state. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.33 | PhaseRecoveryState | read-only | current |
| f3PtpTSTimeHoldoverAccuracy OBJECT-TYPE This object specify the time hold over accuracy. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.34 | HoldoverAccuracy | read-write | current |
| f3PtpTSWtrTime OBJECT-TYPE This object should allow configuration of Wait To Restore timeout in minutes. The range of this object should be 0-12. | 1.3.6.1.4.1.2544.1.12.18.1.3.1.35 | Integer32 (0..12) | read-write | current |
| f3PtpSOOCTable OBJECT-TYPE A list of entries corresponding to the Slave Only Ordinary Clocks. | 1.3.6.1.4.1.2544.1.12.18.1.4 | not-accessible | current | |
| f3PtpSOOCEntry OBJECT-TYPE An entry containing information applicable to a particular Slave Only Ordinary Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.4.1 | not-accessible | current | |
| f3PtpSOOCIndex OBJECT-TYPE Unique index value associated with the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.1 | Integer32 | not-accessible | current |
| f3PtpSOOCName OBJECT-TYPE This object allows SNMP management entities to provide a name to the Slave Only Ordinary Clock. This is used for creation of the underlying IP Interface associated with the SOOC. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.2 | DisplayString (SIZE(1..15)) | read-create | current |
| f3PtpSOOCAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.3 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpSOOCAdminState OBJECT-TYPE This object represents the Administrative State of the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.4 | AdminState | read-write | current |
| f3PtpSOOCOperationalState OBJECT-TYPE This object represents the Operational State of the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.5 | OperationalState | read-only | current |
| f3PtpSOOCSecondaryState OBJECT-TYPE This object represents the Secondary State of the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.6 | SecondaryState | read-only | current |
| f3PtpSOOCServiceFlow OBJECT-TYPE Traffic Flow or SHG associated with the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.7 | VariablePointer | read-create | current |
| f3PtpSOOCMasterClockType OBJECT-TYPE This object must be used to specify the type of the Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.8 | MasterClockType | read-only | current |
| f3PtpSOOCUnicastMessageNegEnabled OBJECT-TYPE This object must be used to specify whether Unicast Message Negotiation is enabled for the Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.9 | TruthValue | read-create | current |
| f3PtpSOOCMasterDelayMechanism OBJECT-TYPE This object allows specification of the delay mechanism. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.10 | DelayMechanism | read-write | current |
| f3PtpSOOCMasterPriority OBJECT-TYPE This object allows specification of the OC Master Priority. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.11 | Integer32 | read-create | current |
| f3PtpSOOCMasterIpProtocol OBJECT-TYPE This object allows specification of the IP Protocol to communicate with the OC Master. Only ipv4 is supported. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.12 | IpVersion | read-create | current |
| f3PtpSOOCSlaveIpV4Address OBJECT-TYPE This object allows specification of the IPv4 Address of the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.13 | IpAddress | read-create | current |
| f3PtpSOOCSlaveIpV4SubnetMask OBJECT-TYPE This object allows specification of the IPv4 Subnet Mask of the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.14 | IpAddress | read-create | current |
| f3PtpSOOCMasterIpV4Address OBJECT-TYPE This object allows specification of the IPv4 Address of the OC Master. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.15 | IpAddress | read-create | current |
| f3PtpSOOCIpPriorityMapMode OBJECT-TYPE This object enables specification of Priority Mapping Mode for the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.16 | IpPriorityMapMode | read-write | current |
| f3PtpSOOCIpPriority OBJECT-TYPE This object enables specification of Priority Value for f3PtpSOOCIpPriorityMapMode as priomap-tos,priomap-dscp. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.17 | Integer32 (0..63) | read-write | current |
| f3PtpSOOCMasterLeaseDuration OBJECT-TYPE This object allows specification of the lease Duration for Announce and Sync messages. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.18 | Integer32 | read-create | current |
| f3PtpSOOCMasterAnnounceMsgRate OBJECT-TYPE This object allows specification of the PTP Announce Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.19 | AnnounceMsgRate | read-create | current |
| f3PtpSOOCMasterAnnounceMsgReceiptTimeout OBJECT-TYPE This object allows specification of the PTP Announce Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.20 | Integer32 | read-create | current |
| f3PtpSOOCMasterSyncMsgRate OBJECT-TYPE This object allows specification of the PTP Sync Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.21 | SyncMsgRate | read-create | current |
| f3PtpSOOCMasterSyncReceiptTimeout OBJECT-TYPE This object allows specification of the PTP Sync Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.22 | Integer32 | read-create | current |
| f3PtpSOOCMasterDelayRspMsgRate OBJECT-TYPE This object allows specification of the PTP Delay Response Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.23 | DelayRespMsgRate | read-create | current |
| f3PtpSOOCMasterDelayRspReceiptTimeout OBJECT-TYPE This object allows specification of the PTP Delay Response Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.24 | Integer32 | read-create | current |
| f3PtpSOOCMasterRequestUnicastTimeout OBJECT-TYPE This object allows specification of the Request Unicast Timeout in seconds. Unicast transmission is termed as failed when this timeout occurs. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.25 | Integer32 | read-write | current |
| f3PtpSOOCMasterRequestUnicastRestartTimer OBJECT-TYPE This object allows specification of the time (in seconds) to wait to restart the Request Unicast signalling. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.26 | Integer32 | read-write | current |
| f3PtpSOOCCurrentOffsetFromMaster OBJECT-TYPE This object provides the current Offset From Master. The value provided is in nanoseconds. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.27 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCAnnounceMsgClockClass OBJECT-TYPE This object provides the Clock Class obtained in the Announce Message. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.28 | Integer32 | read-only | deprecated |
| f3PtpSOOCLastReceivedAnnounceMsg OBJECT-TYPE This object provides the Last Received Announce Message. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.29 | OCTET STRING (SIZE(0..128)) | read-only | current |
| f3PtpSOOCLastReceivedSyncMsg OBJECT-TYPE This object provides the Last Received Sync Message. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.30 | OCTET STRING (SIZE(0..128)) | read-only | current |
| f3PtpSOOCLastReceivedDelayRspMsg OBJECT-TYPE This object provides the Last Received Delay Response Message. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.31 | OCTET STRING (SIZE(0..128)) | read-only | current |
| f3PtpSOOCRecentMeanPathDelay OBJECT-TYPE This object provides the most recent mean path delay. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.32 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCRecentSyncPDV OBJECT-TYPE This object provides the Sync messages packet delay variation. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.33 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.34 | StorageType | read-create | current |
| f3PtpSOOCRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpSOOCRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpSOOCRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpSOOCRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.4.1.35 | RowStatus | read-create | current |
| f3PtpSOOCRecentSyncPathDelay OBJECT-TYPE This object provides the Sync messages packet delay. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.36 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCSoocProtectionState OBJECT-TYPE This object indicates whether the Sooc is used by the Telecom Slave for the clock recovery. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.37 | PTPProtectionState | read-only | current |
| f3PtpSOOCSoocWtr OBJECT-TYPE This object provides WTR protection state of the Sooc. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.38 | TruthValue | read-only | current |
| f3PtpSOOCSoocClockClass OBJECT-TYPE This object provides the Clock Class of the Sooc. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.39 | Unsigned32 | read-only | current |
| f3PtpSOOCSoocClockRecoveryState OBJECT-TYPE This object provides the frequency recovery state of the Sooc. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.40 | ClockRecoveryState | read-only | current |
| f3PtpSOOCSoocPhaseRecoveryState OBJECT-TYPE This object provides the Phase recovery state of the Sooc. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.41 | PhaseRecoveryState | read-only | current |
| f3PtpSOOCE2eDelayAsymmetryComp OBJECT-TYPE This object allows configuration of end to end asymmetry delay compensation mode. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.42 | CompensationMode | read-write | current |
| f3PtpSOOCE2eAutoAsymmetryCompStatus OBJECT-TYPE This object provides the automatic end to end delay asymmetry status. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.43 | CompensationStatus | read-only | current |
| f3PtpSOOCE2eDelayAsymmetry OBJECT-TYPE This object is used for manual configuration of end to end delay asymmetry in ns if end to end delay asymmetry compensation is Manual. Or for indication of the measured delay asymmetry if end to end delay asymmetry compensation is automatic. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.44 | Integer32 | read-write | current |
| f3PtpSOOCSoocLockOutControl OBJECT-TYPE This object is used to specify whether Sooc Lockout operation is enabled for the Sooc. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.45 | TruthValue | read-write | current |
| f3PtpSOOCSlaveIpV6Address OBJECT-TYPE This object allows specification of the unicast IPv6 Address of the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.46 | Ipv6Address | read-create | current |
| f3PtpSOOCSlaveIpV6AddrPrefixLength OBJECT-TYPE This object allows specification of the unicast IPv6 Address prefix length of the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.47 | Integer32 (0..128) | read-create | current |
| f3PtpSOOCMasterIpV6Address OBJECT-TYPE This object allows specification of the unicast IPv6 Address of the OC Master. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.48 | Ipv6Address | read-create | current |
| f3PtpSOOCMinimumExpectedClockClass OBJECT-TYPE This object allows setting the minimum expected clock class value, which setes the minimum threshold for receiving packets. if the received clock clock class is greater than the expected clock class value, the packets for the grandmaster or boundary clock that are sending this clock class are dropped. In addition, an alarm called clock-class-mismatch is generated. The default is 247. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.49 | Integer32 (0..255) | read-write | current |
| f3PtpSOOCMasterMessageMode OBJECT-TYPE Describes the PTP slave mode on OSA540X. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.50 | SlaveMode | read-write | current |
| f3PtpSOOCDefaultGatewayControl OBJECT-TYPE This attribute control Gatwaye address for Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.51 | ToggleValue | read-create | current |
| f3PtpSOOCGateway OBJECT-TYPE This object allows specification of the IPv4 Gateway Address of Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.52 | IpAddress | read-create | current |
| f3PtpSOOCIpV6Gateway OBJECT-TYPE This object allows specification of the IPv6 Gateway Address of Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.53 | Ipv6Address | read-create | current |
| f3PtpSOOCAlgorithmPtpAware OBJECT-TYPE This object allows specification of the slave algorithm mode - PTP aware or unaware. | 1.3.6.1.4.1.2544.1.12.18.1.4.1.54 | TruthValue | read-write | current |
| f3PtpOCSlaveVirtualPortTable OBJECT-TYPE A list of entries corresponding to the PTP Transparent Clock Virtual Ports. | 1.3.6.1.4.1.2544.1.12.18.1.5 | not-accessible | current | |
| f3PtpOCSlaveVirtualPortEntry OBJECT-TYPE An entry containing information applicable to a particular PTP OCSlave Virtual Port Entity. | 1.3.6.1.4.1.2544.1.12.18.1.5.1 | not-accessible | current | |
| f3PtpOCSlaveVirtualPortIndex OBJECT-TYPE Unique index value associated with the PTP OC Slave Virtual Port index. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.1 | Integer32 | not-accessible | current |
| f3PtpOCSlaveVirtualPortAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the OC Slave Virtual Port entity. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpOCSlaveVirtualPortAdminState OBJECT-TYPE This object represents the Administrative State of the OC Slave Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.3 | AdminState | read-write | current |
| f3PtpOCSlaveVirtualPortOperationalState OBJECT-TYPE This object represents the Operational State of the OC Slave Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.4 | OperationalState | read-only | current |
| f3PtpOCSlaveVirtualPortSecondaryState OBJECT-TYPE This object represents the Secondary State of the OC Slave Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.5 | SecondaryState | read-only | current |
| f3PtpOCSlaveVirtualPortIdentity OBJECT-TYPE This object represents the PTP Port Identity of the OC Slave Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.6 | PortIdentity | read-write | current |
| f3PtpOCSlaveVirtualPortFlowPoint OBJECT-TYPE This object associates the PTP Flow Point with the Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.7 | VariablePointer | read-create | current |
| f3PtpOCSlaveVirtualPortState OBJECT-TYPE This object provides the PTP state of the OC Slave Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.8 | PtpPortState | read-only | current |
| f3PtpOCSlaveVirtualPortStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.5.1.9 | StorageType | read-create | current |
| f3PtpOCSlaveVirtualPortRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpOCSlaveVirtualPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpOCSlaveVirtualPortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpOCSlaveVirtualPortRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.5.1.10 | RowStatus | read-create | current |
| f3PtpAccPortFlowPointTable OBJECT-TYPE A list of entries corresponding to the PTP Access Port Flow Point entities. | 1.3.6.1.4.1.2544.1.12.18.1.6 | not-accessible | current | |
| f3PtpAccPortFlowPointEntry OBJECT-TYPE An entry containing information applicable to a particular Access Port Flow Point Entity. | 1.3.6.1.4.1.2544.1.12.18.1.6.1 | not-accessible | current | |
| f3PtpAccPortFlowPointIndex OBJECT-TYPE Unique index value associated with the Access Port PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.1 | Integer32 | not-accessible | current |
| f3PtpAccPortFlowPointAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Access Port PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpAccPortFlowPointAdminState OBJECT-TYPE This object represents the Administrative State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.3 | AdminState | read-write | current |
| f3PtpAccPortFlowPointOperationalState OBJECT-TYPE This object represents the Operational State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.4 | OperationalState | read-only | current |
| f3PtpAccPortFlowPointSecondaryState OBJECT-TYPE This object represents the Secondary State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.5 | SecondaryState | read-only | current |
| f3PtpAccPortFlowPointType OBJECT-TYPE This object represents the PTP Flow Point Type, i.e. whether it is an Transparent Clock or an OC Slave. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.6 | PtpFlowPointType | read-create | current |
| f3PtpAccPortFlowPointClock OBJECT-TYPE This object points to the Transparent Clock or Slave Only Ordinary Clock instance which is associated with this PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.7 | VariablePointer | read-only | current |
| f3PtpAccPortFlowPointService OBJECT-TYPE This object points to the associated Traffic Service Flow. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.8 | VariablePointer | read-create | current |
| f3PtpAccPortFlowPointOuterVlanEtherType OBJECT-TYPE This object allows specification of the Outer VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.9 | Integer32 | read-create | current |
| f3PtpAccPortFlowPointOuterVlanMemberList OBJECT-TYPE This object allows specification of the Outer VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.10 | DisplayString | read-create | current |
| f3PtpAccPortFlowPointOuterUntaggedEnabled OBJECT-TYPE This object allows specification of whether the Outer VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.11 | TruthValue | read-create | current |
| f3PtpAccPortFlowPointInner1VlanEtherType OBJECT-TYPE This object allows specification of the Inner1 VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.12 | Integer32 | read-create | current |
| f3PtpAccPortFlowPointInner1VlanMemberList OBJECT-TYPE This object allows specification of the Inner1 VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.13 | DisplayString | read-create | current |
| f3PtpAccPortFlowPointInner1UntaggedEnabled OBJECT-TYPE This object allows specification of whether the Inner1 VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.14 | TruthValue | read-create | current |
| f3PtpAccPortFlowPointInner2VlanEtherType OBJECT-TYPE This object allows specification of the Inner2 VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.15 | Integer32 | read-create | current |
| f3PtpAccPortFlowPointInner2VlanMemberList OBJECT-TYPE This object allows specification of the Inner2 VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.16 | DisplayString | read-create | current |
| f3PtpAccPortFlowPointInner2UntaggedEnabled OBJECT-TYPE This object allows specification of whether the Inner1 VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.17 | TruthValue | read-create | current |
| f3PtpAccPortFlowPointStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.18 | StorageType | read-create | current |
| f3PtpAccPortFlowPointRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpAccPortFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpAccPortFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpAccPortFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.6.1.19 | RowStatus | read-create | current |
| f3PtpAccPortFlowPointCOS OBJECT-TYPE This object allows specification of Class of Service of the PTP traffic associated with this Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.20 | Integer32 (0..7) | read-create | current |
| f3PtpAccPortFlowPointCIRLo OBJECT-TYPE This object allows specification of Committed Information Rate of the PTP traffic associated with this Flow Point. The CIR value is in bits-per-second units. The value of this object represents the lower 32 bits of the total CIR value. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.21 | Unsigned32 | read-create | current |
| f3PtpAccPortFlowPointCIRHi OBJECT-TYPE This object allows specification of Committed Information Rate of the PTP traffic associated with this Flow Point. The CIR value is in bits-per-second units. The value of this object represents the higher 32 bits of the total CIR value. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.22 | Unsigned32 | read-create | current |
| f3PtpAccPortFlowPointEIRLo OBJECT-TYPE This object allows specification of Excess Information Rate of the PTP traffic associated with this Flow Point. The EIR value is in bits-per-second units. The value of this object represents the lower 32 bits of the total EIR value. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.23 | Unsigned32 | read-create | current |
| f3PtpAccPortFlowPointEIRHi OBJECT-TYPE This object allows specification of Excess Information Rate of the PTP traffic associated with this Flow Point. The EIR value is in bits-per-second units. The value of this object represents the higher 32 bits of the total EIR value. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.24 | Unsigned32 | read-create | current |
| f3PtpAccPortFlowPointBufferSize OBJECT-TYPE This object allows specification the Buffer Size of the queue associated with this Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.25 | Unsigned32 | read-create | current |
| f3PtpAccPortFlowPointLoopAvoidance OBJECT-TYPE This object allows specify OID of this associated Loop Avoidance protocol entity. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.26 | VariablePointer | read-create | current |
| f3PtpAccPortFlowPointRefConnectGuardFlow OBJECT-TYPE This object specifies Mac Sec flow object OID. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.27 | VariablePointer | read-write | current |
| f3PtpAccPortFlowPointSecureState OBJECT-TYPE This object specifies the secure state of this flow. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.28 | FlowSecState | read-only | current |
| f3PtpAccPortFlowPointSecureBlockingEnabled OBJECT-TYPE This object can be used to enable/disable secure block. | 1.3.6.1.4.1.2544.1.12.18.1.6.1.29 | TruthValue | read-write | current |
| f3PtpNetPortFlowPointTable OBJECT-TYPE A list of entries corresponding to the PTP Network Port Flow Point entities. | 1.3.6.1.4.1.2544.1.12.18.1.7 | not-accessible | current | |
| f3PtpNetPortFlowPointEntry OBJECT-TYPE An entry containing information applicable to a particular Network Port Flow Point Entity. | 1.3.6.1.4.1.2544.1.12.18.1.7.1 | not-accessible | current | |
| f3PtpNetPortFlowPointIndex OBJECT-TYPE Unique index value associated with the Network Port PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.1 | Integer32 | not-accessible | current |
| f3PtpNetPortFlowPointAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Network Port Flow Point entity. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpNetPortFlowPointAdminState OBJECT-TYPE This object represents the Administrative State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.3 | AdminState | read-write | current |
| f3PtpNetPortFlowPointOperationalState OBJECT-TYPE This object represents the Operational State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.4 | OperationalState | read-only | current |
| f3PtpNetPortFlowPointSecondaryState OBJECT-TYPE This object represents the Secondary State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.5 | SecondaryState | read-only | current |
| f3PtpNetPortFlowPointType OBJECT-TYPE This object represents the PTP Flow Point Type, i.e. whether it is an Transparent Clock or an OC Slave. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.6 | PtpFlowPointType | read-create | current |
| f3PtpNetPortFlowPointClock OBJECT-TYPE This object points to the Transparent Clock or Slave Only Ordinary Clock instance which is associated with this PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.7 | VariablePointer | read-only | current |
| f3PtpNetPortFlowPointService OBJECT-TYPE This object points to the associated Traffic Service Flow. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.8 | VariablePointer | read-create | current |
| f3PtpNetPortFlowPointOuterVlanEtherType OBJECT-TYPE This object allows specification of the Outer VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.9 | Integer32 | read-create | current |
| f3PtpNetPortFlowPointOuterVlanMemberList OBJECT-TYPE This object allows specification of the Outer VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.10 | DisplayString | read-create | current |
| f3PtpNetPortFlowPointOuterUntaggedEnabled OBJECT-TYPE This object allows specification of whether the Outer VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.11 | TruthValue | read-create | current |
| f3PtpNetPortFlowPointInner1VlanEtherType OBJECT-TYPE This object allows specification of the Inner1 VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.12 | Integer32 | read-create | current |
| f3PtpNetPortFlowPointInner1VlanMemberList OBJECT-TYPE This object allows specification of the Inner1 VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.13 | DisplayString | read-create | current |
| f3PtpNetPortFlowPointInner1UntaggedEnabled OBJECT-TYPE This object allows specification of whether the Inner1 VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.14 | TruthValue | read-create | current |
| f3PtpNetPortFlowPointInner2VlanEtherType OBJECT-TYPE This object allows specification of the Inner2 VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.15 | Integer32 | read-create | current |
| f3PtpNetPortFlowPointInner2VlanMemberList OBJECT-TYPE This object allows specification of the Inner2 VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.16 | DisplayString | read-create | current |
| f3PtpNetPortFlowPointInner2UntaggedEnabled OBJECT-TYPE This object allows specification of whether the Inner1 VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.17 | TruthValue | read-create | current |
| f3PtpNetPortFlowPointStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.18 | StorageType | read-create | current |
| f3PtpNetPortFlowPointRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpNetPortFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpNetPortFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpNetPortFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.7.1.19 | RowStatus | read-create | current |
| f3PtpNetPortFlowPointCOS OBJECT-TYPE This object allows specification of Class of Service of the PTP traffic associated with this Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.20 | Integer32 (0..7) | read-create | current |
| f3PtpNetPortFlowPointCIRLo OBJECT-TYPE This object allows specification of Committed Information Rate of the PTP traffic associated with this Flow Point. The CIR value is in bits-per-second units. The value of this object represents the lower 32 bits of the total CIR value. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.21 | Unsigned32 | read-create | current |
| f3PtpNetPortFlowPointCIRHi OBJECT-TYPE This object allows specification of Committed Information Rate of the PTP traffic associated with this Flow Point. The CIR value is in bits-per-second units. The value of this object represents the higher 32 bits of the total CIR value. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.22 | Unsigned32 | read-create | current |
| f3PtpNetPortFlowPointEIRLo OBJECT-TYPE This object allows specification of Excess Information Rate of the PTP traffic associated with this Flow Point. The EIR value is in bits-per-second units. The value of this object represents the lower 32 bits of the total EIR value. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.23 | Unsigned32 | read-create | current |
| f3PtpNetPortFlowPointEIRHi OBJECT-TYPE This object allows specification of Excess Information Rate of the PTP traffic associated with this Flow Point. The EIR value is in bits-per-second units. The value of this object represents the higher 32 bits of the total EIR value. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.24 | Unsigned32 | read-create | current |
| f3PtpNetPortFlowPointBufferSize OBJECT-TYPE This object allows specification the Buffer Size of the queue associated with this Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.25 | Unsigned32 | read-create | current |
| f3PtpNetPortFlowPointLoopAvoidance OBJECT-TYPE This object allows specify OID of this associated Loop Avoidance protocol entity. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.26 | VariablePointer | read-create | current |
| f3PtpNetPortFlowPointRefConnectGuardFlow OBJECT-TYPE This object specifies Mac Sec flow object OID. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.27 | VariablePointer | read-write | current |
| f3PtpNetPortFlowPointSecureState OBJECT-TYPE This object specifies the secure state of this flow. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.28 | FlowSecState | read-only | current |
| f3PtpNetPortFlowPointSecureBlockingEnabled OBJECT-TYPE This object can be used to enable/disable secure block. | 1.3.6.1.4.1.2544.1.12.18.1.7.1.29 | TruthValue | read-write | current |
| f3PtpEthernetAccPortExtTable OBJECT-TYPE This table extends cmEthernetAccPortTable by adding PTP related parameters. | 1.3.6.1.4.1.2544.1.12.18.1.8 | not-accessible | current | |
| f3PtpEthernetAccPortExtEntry OBJECT-TYPE A conceptual row in the f3PtpEthernetAccPortExtTable. | 1.3.6.1.4.1.2544.1.12.18.1.8.1 | not-accessible | current | |
| f3PtpEthernetAccPortDelayAsymmetry OBJECT-TYPE This object allows configuring Delay Asymmetry in nanoseconds on the Ethernet Access Port. The default value is 0. | 1.3.6.1.4.1.2544.1.12.18.1.8.1.1 | Integer32 | read-write | current |
| f3PtpEthernetNetPortExtTable OBJECT-TYPE This table extends cmEthernetNetPortTable by adding PTP related parameters. | 1.3.6.1.4.1.2544.1.12.18.1.9 | not-accessible | current | |
| f3PtpEthernetNetPortExtEntry OBJECT-TYPE A conceptual row in the f3PtpEthernetNetPortExtTable. | 1.3.6.1.4.1.2544.1.12.18.1.9.1 | not-accessible | current | |
| f3PtpEthernetNetPortDelayAsymmetry OBJECT-TYPE This object allows configuring Delay Asymmetry in nanoseconds on the Ethernet Network Port. The default value is 0. | 1.3.6.1.4.1.2544.1.12.18.1.9.1.1 | Integer32 | read-write | current |
| f3PtpConfigScalars OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.18.1.10 | |||
| f3PtpSysTimeOfDayClock OBJECT-TYPE This objects allows configuing PTP Telecom Slave object to be used as clock source for System Time of Day. This object is applicable when sysTimeOfDayType object is set to 'ptp' and points to f3PtpTSAlias. When sysTimeOfDayType is set to value other than 'ptp' this object should return zeroDotZero. | 1.3.6.1.4.1.2544.1.12.18.1.10.1 | VariablePointer | read-write | current |
| f3PtpBCTable OBJECT-TYPE A list of entries corresponding to the PTP Boundary Clock entities. | 1.3.6.1.4.1.2544.1.12.18.1.11 | not-accessible | current | |
| f3PtpBCEntry OBJECT-TYPE An entry containing information applicable to a particular Boundary Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.11.1 | not-accessible | current | |
| f3PtpBCIndex OBJECT-TYPE Unique index value associated with the Boundary Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.1 | Integer32 | not-accessible | current |
| f3PtpBCAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Boundary Clock entity. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpBCAdminState OBJECT-TYPE This object represents the Administrative State of the Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.3 | AdminState | read-create | current |
| f3PtpBCOperationalState OBJECT-TYPE This object represents the Operational State of the Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.4 | OperationalState | read-only | current |
| f3PtpBCSecondaryState OBJECT-TYPE This object represents the Secondary State of the Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.5 | SecondaryState | read-only | current |
| f3PtpBCClockIdentity OBJECT-TYPE This object specifies the Clock Identity of the PTP Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.6 | ClockIdentity | read-create | current |
| f3PtpBCTimingSource OBJECT-TYPE This object provides the entry from the f3PtpTSTable, which is used as frequency and time of day source this Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.7 | VariablePointer | read-create | current |
| f3PtpBCClockClass OBJECT-TYPE This object provides the entry from the f3PtpTSTable, which is used as frequency and time of day source this Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.8 | Unsigned32 | read-only | deprecated |
| f3PtpBCDomainNumber OBJECT-TYPE This object provides the entry from the f3PtpTSTable, which is used as frequency and time of day source this Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.9 | Integer32 | read-create | current |
| f3PtpBCStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.11.1.10 | StorageType | read-create | current |
| f3PtpBCRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpBCRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpBCRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpBCRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.11.1.11 | RowStatus | read-create | current |
| f3PtpBCPhysicalEntityIndex OBJECT-TYPE Populated with index into the physEntityTable (always point to left card slot in case of protection) | 1.3.6.1.4.1.2544.1.12.18.1.11.1.12 | Integer32 | read-create | current |
| f3PtpBCMediationControl OBJECT-TYPE Enable/disable BC Mediation Control | 1.3.6.1.4.1.2544.1.12.18.1.11.1.13 | TruthValue | read-create | current |
| f3PtpMasterClockTable OBJECT-TYPE A list of entries corresponding to the PTP Master Clock entities. | 1.3.6.1.4.1.2544.1.12.18.1.12 | not-accessible | current | |
| f3PtpMasterClockEntry OBJECT-TYPE An entry containing information applicable to a particular Master Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.12.1 | not-accessible | current | |
| f3PtpMasterClockIndex OBJECT-TYPE Unique index value associated with the Boundary Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.1 | Integer32 | not-accessible | current |
| f3PtpMasterClockAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Master Clock entity. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpMasterClockAdminState OBJECT-TYPE This object represents the Administrative State of the Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.3 | AdminState | read-create | current |
| f3PtpMasterClockOperationalState OBJECT-TYPE This object represents the Operational State of the Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.4 | OperationalState | read-only | current |
| f3PtpMasterClockSecondaryState OBJECT-TYPE This object represents the Secondary State of the Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.5 | SecondaryState | read-only | current |
| f3PtpMasterClockClockIdentity OBJECT-TYPE This object specifies the Clock Identity of the PTP Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.6 | ClockIdentity | read-create | current |
| f3PtpMasterClockTimeClock OBJECT-TYPE This object provides the entry from the f3TimeClockTable, which is used as frequency and time of day source this Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.7 | VariablePointer | read-create | current |
| f3PtpMasterClockDomainNumber OBJECT-TYPE This object allows specification of the PTP domain number of the Master Clock . | 1.3.6.1.4.1.2544.1.12.18.1.12.1.8 | Integer32 | read-create | current |
| f3PtpMasterClockPriority1 OBJECT-TYPE | 1.3.6.1.4.1.2544.1.12.18.1.12.1.9 | Unsigned32 (0..255) | read-create | current |
| f3PtpMasterClockPriority2 OBJECT-TYPE | 1.3.6.1.4.1.2544.1.12.18.1.12.1.10 | Unsigned32 (0..255) | read-create | current |
| f3PtpMasterClockClockClass OBJECT-TYPE This object provides the Time Clock Clock Class | 1.3.6.1.4.1.2544.1.12.18.1.12.1.11 | Unsigned32 | read-only | deprecated |
| f3PtpMasterClockClockAccuracy OBJECT-TYPE This object indicates Clock accuracy of the clock | 1.3.6.1.4.1.2544.1.12.18.1.12.1.12 | Unsigned32 | read-only | obsolete |
| f3PtpMasterClockTimeScale OBJECT-TYPE | 1.3.6.1.4.1.2544.1.12.18.1.12.1.13 | TimeScale | read-only | current |
| f3PtpMasterClockUtcOffset OBJECT-TYPE Seconds offset between TAI and UTC | 1.3.6.1.4.1.2544.1.12.18.1.12.1.14 | Integer32 | read-only | current |
| f3PtpMasterClockStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.15 | StorageType | read-create | current |
| f3PtpMasterClockRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpMasterClockRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpMasterClockRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpMasterClockRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.12.1.16 | RowStatus | read-create | current |
| f3PtpMasterClockActiveTimeRef OBJECT-TYPE This object specifies timig reference of the Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.17 | VariablePointer | read-only | current |
| f3PtpMasterClockPTPProfile OBJECT-TYPE This object describe the Master Clock PTP Profile. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.18 | PTPProfile | read-create | current |
| f3PtpMasterClockPhysicalEntityIndex OBJECT-TYPE Populated with index into the physEntityTable (always point to left card slot in case of protection) | 1.3.6.1.4.1.2544.1.12.18.1.12.1.19 | Integer32 | read-create | current |
| f3PtpMasterClockActiveGrantsAnnounceService OBJECT-TYPE Report number of active grants announce service. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.20 | Integer32 | read-only | current |
| f3PtpMasterClockActiveGrantsSyncService OBJECT-TYPE Report number of active grants sync service. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.21 | Integer32 | read-only | current |
| f3PtpMasterClockActiveGrantsDelayRequestService OBJECT-TYPE Report number of active grants delay-request service. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.22 | Integer32 | read-only | current |
| f3PtpMasterClockServiceAvailableTime OBJECT-TYPE This object allows to manage service available time (seconds) for PTP. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.23 | Unsigned32 | read-only | current |
| f3PtpMasterClockServiceUnavailableTime OBJECT-TYPE This object allows to manage service unavailable time (seconds) for PTP. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.24 | Unsigned32 | read-only | current |
| f3PtpMasterClockServiceAvailablePercentage OBJECT-TYPE This object allows to manage service available in percentage [XXX.YY%] for PTP. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.25 | DisplayString | read-only | current |
| f3PtpMasterClockSmpteSystemFrameRateNumerator OBJECT-TYPE This object allows to manage the frame rate (Numerator) for PTP Broadcast Profile. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.26 | Unsigned32 | read-write | current |
| f3PtpMasterClockSmpteSystemFrameRateDenominator OBJECT-TYPE This object allows to manage the frame rate (Denominator) for PTP Broadcast Profile. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.27 | Unsigned32 | read-write | current |
| f3PtpMasterClockSmpteTimeAddressFlags OBJECT-TYPE This object allows to manage the flags for PTP Broadcast Profile. | 1.3.6.1.4.1.2544.1.12.18.1.12.1.28 | Integer32 (0..255) | read-write | current |
| f3PtpMCITable OBJECT-TYPE A list of entries corresponding to the PTP Master Clock Interface entities. | 1.3.6.1.4.1.2544.1.12.18.1.13 | not-accessible | current | |
| f3PtpMCIEntry OBJECT-TYPE An entry containing information applicable to a particular Master Clock Interface Entity. | 1.3.6.1.4.1.2544.1.12.18.1.13.1 | not-accessible | current | |
| f3PtpMCIIndex OBJECT-TYPE Unique index value associated with the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.1 | Integer32 | not-accessible | current |
| f3PtpMCIAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Master Clock Interface entity. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpMCIAdminState OBJECT-TYPE This object represents the Administrative State of the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.3 | AdminState | read-create | current |
| f3PtpMCIOperationalState OBJECT-TYPE This object represents the Operational State of the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.4 | OperationalState | read-only | current |
| f3PtpMCISecondaryState OBJECT-TYPE This object represents the Secondary State of the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.5 | SecondaryState | read-only | current |
| f3PtpMCIPortIdentity OBJECT-TYPE This object represents the PTP Port Identity of the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.6 | PortIdentity | read-only | current |
| f3PtpMCIDomainNumber OBJECT-TYPE This object allows specification of the PTP domain number of the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.7 | Integer32 | read-write | current |
| f3PtpMCIClockType OBJECT-TYPE This object must be used to specify the type of the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.8 | MasterClockType | read-create | current |
| f3PtpMCIDelayMechanism OBJECT-TYPE This object represents the Delay Mechanism of the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.9 | DelayMechanism | read-create | current |
| f3PtpMCIIfName OBJECT-TYPE This object allows SNMP management entities to provide a name to the Slave Only Ordinary Clock. This is used for creation of the underlying IP Interface associated with the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.10 | DisplayString (SIZE(1..15)) | read-create | current |
| f3PtpMCIIpProtocol OBJECT-TYPE This object allows specification of the IP Protocol to communicate with Remote Slaves. Only ipv4 is supported. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.11 | IpVersion | read-create | current |
| f3PtpMCIMasterIpV4Address OBJECT-TYPE This object allows specification of the IPv4 Address of the PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.12 | IpAddress | read-create | current |
| f3PtpMCIMasterIpV4SubnetMask OBJECT-TYPE This object allows specification of the IPv4 Subnet Mask of the PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.13 | IpAddress | read-create | current |
| f3PtpMCIIpPriorityMapMode OBJECT-TYPE This object enables specification of Priority Mapping Mode for the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.14 | IpPriorityMapMode | read-create | current |
| f3PtpMCIIpPriority OBJECT-TYPE This object enables specification of Priority Value for f3PtpMCIIpPriorityMapMode as priomap-tos,priomap-dscp. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.15 | Integer32 (0..63) | read-create | current |
| f3PtpMCIMaxLeaseDuration OBJECT-TYPE This enables specification of maximum lease duration for granted announce, Sync and Delay Response service in seconds. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.16 | Integer32 | read-create | current |
| f3PtpMCIMaxSlavesSupported OBJECT-TYPE This attribute specifies maximum total number of Static and Dynamic Remote Slaves supported by the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.17 | Integer32 | read-write | current |
| f3PtpMCIMaxStaticSlavesSupported OBJECT-TYPE This attribute specifies maximum total number of Static Remote Slaves supported by the Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.18 | Integer32 | read-write | current |
| f3PtpMCIMaxSyncMsgRate OBJECT-TYPE This attribute specifies maximum allowed negotiated Sync Messages rate per remote Slave Clock with UMN enabled of default Sync Messages rate per remote Slave Clock with UMN disabled. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.19 | SyncMsgRate | read-create | current |
| f3PtpMCIMaxDelayRespMsgRate OBJECT-TYPE This attribute specifies maximum allowed negotiated Delay_Resp Messages rate per remote Slave Clock with UMN enabled of default Delay_Resp Messages rate per remote Slave Clock with UMN disabled. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.20 | DelayRespMsgRate | read-create | current |
| f3PtpMCIMaxAnnounceMsgRate OBJECT-TYPE This attribute specifies maximum allowed negotiated Delay_Req Messages rate per remote Slave Clock with UMN enabled of default Delay_Req Messages rate per remote Slave Clock with UMN disabled. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.21 | AnnounceMsgRate | read-create | current |
| f3PtpMCIStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.22 | StorageType | read-create | current |
| f3PtpMCIRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpMCIRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpMCIRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpMCIRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.13.1.23 | RowStatus | read-create | current |
| f3PtpMCIServiceFlow OBJECT-TYPE This object describe the associated service flow. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.24 | VariablePointer | read-write | current |
| f3PtpMCIClockClassProfile OBJECT-TYPE This object describe the Clock Class Profile. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.25 | ClockClassProfile | read-create | current |
| f3PtpMCIClockClass OBJECT-TYPE This object provides the MCI Clock Class | 1.3.6.1.4.1.2544.1.12.18.1.13.1.26 | Unsigned32 | read-only | current |
| f3PtpMCIAnnounceExtTLVEnable OBJECT-TYPE This object determines whether the announce message has a TLV extension | 1.3.6.1.4.1.2544.1.12.18.1.13.1.27 | TruthValue | read-create | current |
| f3PtpMCIPtpTransport OBJECT-TYPE This object specifies the PTP transport | 1.3.6.1.4.1.2544.1.12.18.1.13.1.28 | PTPTransport | read-create | current |
| f3PtpMCIPtpTransportMode OBJECT-TYPE This object specifies the PTP transport mode | 1.3.6.1.4.1.2544.1.12.18.1.13.1.29 | PTPTransportMode | read-only | current |
| f3PtpMCIPtpRemoteSlaveAgingTimeout OBJECT-TYPE This attribute (in seconds) specifies the aging timeout for inactive dynamic remote slaves. The value 0 means it is never aged. Note that this attribute is not applicable to static slaves. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.30 | Integer32 (0..300) | read-create | current |
| f3PtpMCIMasterIpV6Address OBJECT-TYPE This object allows specification of the unicast ipv6 Address of the PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.31 | Ipv6Address | read-create | current |
| f3PtpMCIMasterIpV6AddrPrefixLength OBJECT-TYPE This object allows specification of the unicast IPv6 address prefix length of the PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.32 | Integer32 (0..128) | read-create | current |
| f3PtpMCIDefaultGatewayControl OBJECT-TYPE This attribute control Gatwaye address for PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.33 | ToggleValue | read-create | current |
| f3PtpMCIGateway OBJECT-TYPE This object allows specification of the IPv4 Gateway Address of the PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.34 | IpAddress | read-create | current |
| f3PtpMCIIpV6Gateway OBJECT-TYPE This object allows specification of the IPv6 Gateway Address of the PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.13.1.35 | Ipv6Address | read-create | current |
| f3PtpMasterVirtualPortTable OBJECT-TYPE A list of entries corresponding to the PTP Master Clock Interface Virtual Port entities. | 1.3.6.1.4.1.2544.1.12.18.1.14 | not-accessible | current | |
| f3PtpMasterVirtualPortEntry OBJECT-TYPE An entry containing information applicable to a particular Master Clock Interface Virtual Port entity. | 1.3.6.1.4.1.2544.1.12.18.1.14.1 | not-accessible | current | |
| f3PtpMasterVirtualPortIndex OBJECT-TYPE Unique index value associated with the Master Virtual Port entity. | 1.3.6.1.4.1.2544.1.12.18.1.14.1.1 | Integer32 | not-accessible | current |
| f3PtpMasterVirtualPortAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Master Virtual Port entity. | 1.3.6.1.4.1.2544.1.12.18.1.14.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpMasterVirtualPortAdminState OBJECT-TYPE This object represents the Administrative State of the Master Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.14.1.3 | AdminState | read-create | current |
| f3PtpMasterVirtualPortOperationalState OBJECT-TYPE This object represents the Operational State of the Master Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.14.1.4 | OperationalState | read-only | current |
| f3PtpMasterVirtualPortSecondaryState OBJECT-TYPE This object represents the Secondary State of the Master Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.14.1.5 | SecondaryState | read-only | current |
| f3PtpMasterVirtualPortFlowPoint OBJECT-TYPE This object associates the PTP Flow Point with the Master Virtual Port. | 1.3.6.1.4.1.2544.1.12.18.1.14.1.6 | VariablePointer | read-create | current |
| f3PtpMasterVirtualPortStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.14.1.7 | StorageType | read-create | current |
| f3PtpMasterVirtualPortRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpMasterVirtualPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpMasterVirtualPortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpMasterVirtualPortRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.14.1.8 | RowStatus | read-create | current |
| f3PtpStaticRemoteSlaveTable OBJECT-TYPE A list of entries corresponding to the PTP Remote Slave entities. | 1.3.6.1.4.1.2544.1.12.18.1.15 | not-accessible | current | |
| f3PtpStaticRemoteSlaveEntry OBJECT-TYPE An entry containing information applicable to a particular Static Remote Slave entity. | 1.3.6.1.4.1.2544.1.12.18.1.15.1 | not-accessible | current | |
| f3PtpStaticRemoteSlaveIndex OBJECT-TYPE Unique index value associated with the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.1 | Integer32 | not-accessible | current |
| f3PtpStaticRemoteSlaveAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpStaticRemoteSlaveAdminState OBJECT-TYPE This object represents the Administrative State of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.3 | AdminState | read-create | current |
| f3PtpStaticRemoteSlaveOperationalState OBJECT-TYPE This object represents the Operational State of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.4 | OperationalState | read-only | current |
| f3PtpStaticRemoteSlaveSecondaryState OBJECT-TYPE This object represents the Secondary State of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.5 | SecondaryState | read-only | current |
| f3PtpStaticRemoteSlaveClockIdentity OBJECT-TYPE This object represents the Clock Identity of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.6 | ClockIdentity | read-only | current |
| f3PtpStaticRemoteSlaveIpV4Address OBJECT-TYPE This object allows specification of the IPv4 Address of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.7 | IpAddress | read-create | current |
| f3PtpStaticRemoteSlaveTimeCreated OBJECT-TYPE This object presents time when this Remote Slave entity was created. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.8 | DateAndTime | read-only | current |
| f3PtpStaticRemoteSlaveSyncMsgRate OBJECT-TYPE This attribute specifies Sync Message Rate of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.9 | SyncMsgRate | read-create | current |
| f3PtpStaticRemoteSlaveDelayRspMsgRate OBJECT-TYPE This attribute specifies Delay Respone Message Rate of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.10 | DelayRespMsgRate | read-create | current |
| f3PtpStaticRemoteSlaveAnnounceMsgRate OBJECT-TYPE This attribute specifies Announce Message Rate of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.11 | AnnounceMsgRate | read-create | current |
| f3PtpStaticRemoteSlaveNegSyncLeaseDur OBJECT-TYPE This attribute indicates Sync messages negotiated Lease Duration in seconds. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.12 | Integer32 | read-only | current |
| f3PtpStaticRemoteSlaveNegDelayRspLeaseDur OBJECT-TYPE This attribute indicates Delay Response messages negotiated Lease Duration in seconds. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.13 | Integer32 | read-only | current |
| f3PtpStaticRemoteSlaveNegAnnounceLeaseDur OBJECT-TYPE This attribute indicates Announce messages negotiated Lease Duration in seconds. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.14 | Integer32 | read-only | current |
| f3PtpStaticRemoteSlaveSyncDurRemTime OBJECT-TYPE This attribute indicates Remaining seconds of Lease Duration of Sync service. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.15 | Unsigned32 | read-only | current |
| f3PtpStaticRemoteSlaveDelayRspDurRemTime OBJECT-TYPE This attribute indicates Remaining seconds of Lease Duration of Delay Response service. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.16 | Unsigned32 | read-only | current |
| f3PtpStaticRemoteSlaveAnnounceDurRemTime OBJECT-TYPE This attribute indicates Remaining seconds of Lease Duration of Announce service. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.17 | Unsigned32 | read-only | current |
| f3PtpStaticRemoteSlaveUmnControl OBJECT-TYPE This attribute controls UMN for the static remote slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.18 | TruthValue | read-create | current |
| f3PtpStaticRemoteSlaveStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.19 | StorageType | read-create | current |
| f3PtpStaticRemoteSlaveRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpStaticRemoteSlaveRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpStaticRemoteSlaveRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpStaticRemoteSlaveRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.15.1.20 | RowStatus | read-create | current |
| f3PtpStaticRemoteSlaveIpV6Address OBJECT-TYPE This object allows specification of the unicast IPv6 Address of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.15.1.21 | Ipv6Address | read-create | current |
| f3PtpDynamicRemoteSlaveTable OBJECT-TYPE A list of entries corresponding to the PTP Remote Slave entities. | 1.3.6.1.4.1.2544.1.12.18.1.16 | not-accessible | current | |
| f3PtpDynamicRemoteSlaveEntry OBJECT-TYPE An entry containing information applicable to a particular Dynamic Remote Slave entity. | 1.3.6.1.4.1.2544.1.12.18.1.16.1 | not-accessible | current | |
| f3PtpDynamicRemoteSlaveIndex OBJECT-TYPE Unique index value associated with the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.1 | Integer32 | not-accessible | current |
| f3PtpDynamicRemoteSlaveAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.2 | DisplayString (SIZE(0..256)) | read-write | current |
| f3PtpDynamicRemoteSlaveAdminState OBJECT-TYPE This object represents the Administrative State of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.3 | AdminState | read-write | current |
| f3PtpDynamicRemoteSlaveOperationalState OBJECT-TYPE This object represents the Operational State of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.4 | OperationalState | read-only | current |
| f3PtpDynamicRemoteSlaveSecondaryState OBJECT-TYPE This object represents the Secondary State of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.5 | SecondaryState | read-only | current |
| f3PtpDynamicRemoteSlaveClockIdentity OBJECT-TYPE This object represents the Clock Identity of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.6 | ClockIdentity | read-only | current |
| f3PtpDynamicRemoteSlaveIpV4Address OBJECT-TYPE This object allows specification of the IPv4 Address of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.7 | IpAddress | read-only | current |
| f3PtpDynamicRemoteSlaveTimeCreated OBJECT-TYPE This object presents time when this Remote Slave entity was created. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.8 | DateAndTime | read-only | current |
| f3PtpDynamicRemoteSlaveSyncMsgRate OBJECT-TYPE This attribute specifies Sync Message Rate of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.9 | SyncMsgRate | read-only | current |
| f3PtpDynamicRemoteSlaveDelayRspMsgRate OBJECT-TYPE This attribute specifies Delay Respone Message Rate of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.10 | DelayRespMsgRate | read-only | current |
| f3PtpDynamicRemoteSlaveAnnounceMsgRate OBJECT-TYPE This attribute specifies Announce Message Rate of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.11 | AnnounceMsgRate | read-only | current |
| f3PtpDynamicRemoteSlaveNegSyncLeaseDur OBJECT-TYPE This attribute indicates Sync messages negotiated Lease Duration in seconds. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.12 | Integer32 | read-only | current |
| f3PtpDynamicRemoteSlaveNegDelayRspLeaseDur OBJECT-TYPE This attribute indicates Delay Response messages negotiated Lease Duration in seconds. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.13 | Integer32 | read-only | current |
| f3PtpDynamicRemoteSlaveNegAnnounceLeaseDur OBJECT-TYPE This attribute indicates Announce messages negotiated Lease Duration in seconds. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.14 | Integer32 | read-only | current |
| f3PtpDynamicRemoteSlaveSyncDurRemTime OBJECT-TYPE This attribute indicates Remaining seconds of Lease Duration of Sync service. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.15 | Unsigned32 | read-only | current |
| f3PtpDynamicRemoteSlaveDelayRspDurRemTime OBJECT-TYPE This attribute indicates Remaining seconds of Lease Duration of Delay Response service. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.16 | Unsigned32 | read-only | current |
| f3PtpDynamicRemoteSlaveAnnounceDurRemTime OBJECT-TYPE This attribute indicates Remaining seconds of Lease Duration of Announce service. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.17 | Unsigned32 | read-only | current |
| f3PtpDynamicRemoteSlaveRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpDynamicRemoteSlaveRowStatus supported is destroy(6). The f3PtpDynamicRemoteSlaveRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.16.1.18 | RowStatus | read-create | current |
| f3PtpDynamicRemoteSlaveStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.19 | StorageType | read-create | current |
| f3PtpDynamicRemoteSlavePortIdentity OBJECT-TYPE The port identity of the remote slave | 1.3.6.1.4.1.2544.1.12.18.1.16.1.20 | PortIdentity | read-only | current |
| f3PtpDynamicRemoteSlavePeerMacAddress OBJECT-TYPE The port identity of the remote slave | 1.3.6.1.4.1.2544.1.12.18.1.16.1.21 | MacAddress | read-only | current |
| f3PtpDynamicRemoteSlaveIpV6Address OBJECT-TYPE This object allows specification of the unicast IPv6 Address of the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.16.1.22 | Ipv6Address | read-only | current |
| f3PtpTrafficPortFlowPointTable OBJECT-TYPE A list of entries corresponding to the PTP Access Port Flow Point entities. | 1.3.6.1.4.1.2544.1.12.18.1.17 | not-accessible | current | |
| f3PtpTrafficPortFlowPointEntry OBJECT-TYPE An entry containing information applicable to a particular Traffic Port Flow Point Entity. | 1.3.6.1.4.1.2544.1.12.18.1.17.1 | not-accessible | current | |
| f3PtpTrafficPortFlowPointIndex OBJECT-TYPE Unique index value associated with the Traffic Port PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.1 | Integer32 | not-accessible | current |
| f3PtpTrafficPortFlowPointAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the Traffic Port PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.2 | DisplayString (SIZE(0..256)) | read-create | current |
| f3PtpTrafficPortFlowPointAdminState OBJECT-TYPE This object represents the Administrative State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.3 | AdminState | read-write | current |
| f3PtpTrafficPortFlowPointOperationalState OBJECT-TYPE This object represents the Operational State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.4 | OperationalState | read-only | current |
| f3PtpTrafficPortFlowPointSecondaryState OBJECT-TYPE This object represents the Secondary State of the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.5 | SecondaryState | read-only | current |
| f3PtpTrafficPortFlowPointType OBJECT-TYPE This object represents the PTP Flow Point Type, i.e. whether it is an Transparent Clock or an OC Slave. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.6 | PtpFlowPointType | read-create | current |
| f3PtpTrafficPortFlowPointClock OBJECT-TYPE This object points to the Transparent Clock or Slave Only Ordinary Clock instance which is associated with this PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.7 | VariablePointer | read-only | current |
| f3PtpTrafficPortFlowPointService OBJECT-TYPE This object points to the associated Traffic Service Flow. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.8 | VariablePointer | read-create | current |
| f3PtpTrafficPortFlowPointOuterVlanEtherType OBJECT-TYPE This object allows specification of the Outer VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.9 | Integer32 | read-create | current |
| f3PtpTrafficPortFlowPointOuterVlanMemberList OBJECT-TYPE This object allows specification of the Outer VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.10 | DisplayString | read-create | current |
| f3PtpTrafficPortFlowPointOuterUntaggedEnabled OBJECT-TYPE This object allows specification of whether the Outer VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.11 | TruthValue | read-create | current |
| f3PtpTrafficPortFlowPointInner1VlanEtherType OBJECT-TYPE This object allows specification of the Inner1 VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.12 | Integer32 | read-create | current |
| f3PtpTrafficPortFlowPointInner1VlanMemberList OBJECT-TYPE This object allows specification of the Inner1 VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.13 | DisplayString | read-create | current |
| f3PtpTrafficPortFlowPointInner1UntaggedEnabled OBJECT-TYPE This object allows specification of whether the Inner1 VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.14 | TruthValue | read-create | current |
| f3PtpTrafficPortFlowPointInner2VlanEtherType OBJECT-TYPE This object allows specification of the Inner2 VLAN Ether Type of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.15 | Integer32 | read-create | current |
| f3PtpTrafficPortFlowPointInner2VlanMemberList OBJECT-TYPE This object allows specification of the Inner2 VLAN(s) of the PTP Flow. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.16 | DisplayString | read-create | current |
| f3PtpTrafficPortFlowPointInner2UntaggedEnabled OBJECT-TYPE This object allows specification of whether the Inner1 VLAN exists or not. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.17 | TruthValue | read-create | current |
| f3PtpTrafficPortFlowPointStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.18 | StorageType | read-create | current |
| f3PtpTrafficPortFlowPointRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpTrafficPortFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpTrafficPortFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpTrafficPortFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.17.1.19 | RowStatus | read-create | current |
| f3PtpTrafficPortFlowPointCOS OBJECT-TYPE This object allows specification of Class of Service of the PTP traffic associated with this Flow Point. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.20 | Integer32 (0..7) | read-create | current |
| f3PtpTrafficPortFlowPointCIRLo OBJECT-TYPE This object allows specification of Committed Information Rate of the PTP traffic associated with this Flow Point. The CIR value is in bits-per-second units. The value of this object represents the lower 32 bits of the total CIR value. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.21 | Unsigned32 | read-create | current |
| f3PtpTrafficPortFlowPointCIRHi OBJECT-TYPE This object allows specification of Committed Information Rate of the PTP traffic associated with this Flow Point. The CIR value is in bits-per-second units. The value of this object represents the higher 32 bits of the total CIR value. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.22 | Unsigned32 | read-create | current |
| f3PtpTrafficPortFlowPointEIRLo OBJECT-TYPE This object allows specification of Excess Information Rate of the PTP traffic associated with this Flow Point. The EIR value is in bits-per-second units. The value of this object represents the lower 32 bits of the total EIR value. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.23 | Unsigned32 | read-create | current |
| f3PtpTrafficPortFlowPointEIRHi OBJECT-TYPE This object allows specification of Excess Information Rate of the PTP traffic associated with this Flow Point. The EIR value is in bits-per-second units. The value of this object represents the higher 32 bits of the total EIR value. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.24 | Unsigned32 | read-create | current |
| f3PtpTrafficPortFlowPointAssociatedQueueProfile OBJECT-TYPE This object allows specification of the related queue profile. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.25 | VariablePointer | read-create | current |
| f3PtpTrafficPortFlowPointLoopAvoidance OBJECT-TYPE This object allows specify OID of this associated Loop Avoidance protocol entity. | 1.3.6.1.4.1.2544.1.12.18.1.17.1.26 | VariablePointer | read-create | current |
| f3PtpEthernetTrafficPortExtTable OBJECT-TYPE This table extends cmEthernetTrafficPortTable by adding PTP related parameters. | 1.3.6.1.4.1.2544.1.12.18.1.18 | not-accessible | current | |
| f3PtpEthernetTrafficPortExtEntry OBJECT-TYPE A conceptual row in the f3PtpEthernetTrafficPortExtTable. | 1.3.6.1.4.1.2544.1.12.18.1.18.1 | not-accessible | current | |
| f3PtpEthernetTrafficPortDelayAsymmetry OBJECT-TYPE This object allows configuring Delay Asymmetry in nanoseconds on the Ethernet Traffic Port. The default value is 0. | 1.3.6.1.4.1.2544.1.12.18.1.18.1.1 | Integer32 | read-write | current |
| f3PtpPTPClockTable OBJECT-TYPE A list of entries corresponding to the PTP PTP Clock entities. | 1.3.6.1.4.1.2544.1.12.18.1.19 | not-accessible | current | |
| f3PtpPTPClockEntry OBJECT-TYPE An entry containing information applicable to a particular PTP Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.19.1 | not-accessible | current | |
| f3PtpPTPClockIndex OBJECT-TYPE Unique index value associated with the PTP Clock Entity. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.1 | Integer32 | not-accessible | current |
| f3PtpPTPClockAdminState OBJECT-TYPE This object represents the Administrative State of the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.2 | AdminState | read-write | current |
| f3PtpPTPClockAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the PTP Clock entity. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.3 | DisplayString (SIZE(0..256)) | read-write | current |
| f3PtpPTPClockOperationalState OBJECT-TYPE This object represents the Operational State of the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.4 | OperationalState | read-only | current |
| f3PtpPTPClockSecondaryState OBJECT-TYPE This object represents the Secondary State of the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.5 | SecondaryState | read-only | current |
| f3PtpPTPClockProfile OBJECT-TYPE This object represents the Secondary State of the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.6 | PTPClockProfile | read-create | current |
| f3PtpPTPClockClockType OBJECT-TYPE This object provides the entry from the f3TimeClockTable, which is used as frequency and time of day source this Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.7 | PTPClockType | read-create | current |
| f3PtpPTPClockOperationalMode OBJECT-TYPE This object provides the entry from the f3TimeClockTable, which is used as frequency and time of day source this Master Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.8 | PTPClockOperMode | read-only | current |
| f3PtpPTPClockClockIdentity OBJECT-TYPE This object specifies the Clock Identity of the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.9 | ClockIdentity | read-create | current |
| f3PtpPTPClockDomainNumber OBJECT-TYPE This object allows specification of the PTP domain number of the Master Clock . | 1.3.6.1.4.1.2544.1.12.18.1.19.1.10 | Integer32 | read-create | current |
| f3PtpPTPClockTimeSource OBJECT-TYPE This object specify PTP Clock time source. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.11 | VariablePointer | read-only | current |
| f3PtpPTPClockPriority1 OBJECT-TYPE | 1.3.6.1.4.1.2544.1.12.18.1.19.1.12 | Unsigned32 (0..255) | read-write | current |
| f3PtpPTPClockPriority2 OBJECT-TYPE | 1.3.6.1.4.1.2544.1.12.18.1.19.1.13 | Unsigned32 (0..255) | read-write | current |
| f3PtpPTPClockLocalPriority OBJECT-TYPE This object allows configuration of local priority used by the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.14 | Unsigned32 (1..255) | read-write | current |
| f3PtpPTPClockClockAccuracy OBJECT-TYPE This object indicates Clock accuracy of the clock | 1.3.6.1.4.1.2544.1.12.18.1.19.1.15 | Unsigned32 | read-only | obsolete |
| f3PtpPTPClockScaledLogVariance OBJECT-TYPE | 1.3.6.1.4.1.2544.1.12.18.1.19.1.16 | Integer32 | read-only | current |
| f3PtpPTPClockSyncEid OBJECT-TYPE This object provides the entry from the f3SyncTable, which is used as frequency for this PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.17 | VariablePointer | read-write | current |
| f3PtpPTPClockCurrentTimeOfDay OBJECT-TYPE This object allows specification of the PTP Clock Current Time of Day. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.18 | DateAndTime | read-only | current |
| f3PtpPTPClockActiveSlavePort OBJECT-TYPE This object specifies Active Slave Port of the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.19 | VariablePointer | read-only | current |
| f3PtpPTPClockClockRecoveryState OBJECT-TYPE This object provides the TPTP Clock's clock recovery state. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.20 | ClockRecoveryState | read-only | current |
| f3PtpPTPClockPhaseRecoveryState OBJECT-TYPE This object specify the phase recovery state. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.21 | PhaseRecoveryState | read-only | current |
| f3PtpPTPClockTimeTraceabilityStatus OBJECT-TYPE This object provides the Time traceability status of the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.22 | TruthValue | read-only | current |
| f3PtpPTPClockTimeSinceTimeTraceabilityChanged OBJECT-TYPE This object provides the time in seconds since the Time traceability changed on the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.23 | Unsigned32 | read-only | current |
| f3PtpPTPClockFreqTraceabilityStatus OBJECT-TYPE This object provides the Frequency traceability status of the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.24 | TruthValue | read-only | current |
| f3PtpPTPClockTimeSinceFreqTraceabilityChanged OBJECT-TYPE This object provides the time in seconds since the Frequency traceability changed on the PTP Clock. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.25 | Unsigned32 | read-only | current |
| f3PtpPTPClockClockSyncEEnabled OBJECT-TYPE This object allows to specify whether the Telecom Slave can be enabled/disabled for Synchronous Ethernet. When enabled, on receive side -telecom slave can extract the frequency and pass the recovered clock to the system clock -QL is extracted (when QL is enabled) from the selected SOOC's clock class -telecom slave is eligible to be selected as a system clock reference When disabled, on receive side, -telecom slave does not pass the recovered clock to the system clock -telecom slave does not process the QL from selected SOOC's clock class -telecom slave is not eligible to be selected as a system clock reference. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.26 | TruthValue | read-write | current |
| f3PtpPTPClockClockQLModeEnabled OBJECT-TYPE This object allows to specify whether the Telecom Slave can be enabled/disabled for QL Mode. When enabled, on receive side -telecom slave can extract the QL from selected SOOC's clock class When disabled, on receive side, -telecom slave does not process the QL from selected SOOC's clock class. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.27 | TruthValue | read-write | current |
| f3PtpPTPClockClockExpectedQL OBJECT-TYPE This object allows to specify the expected QL when the Telecom Slave is enabled for QL Mode. This is applicable when f3PtpPTPClockClockQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the Telecom Slave. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.28 | SSMQualityLevel | read-write | current |
| f3PtpPTPClockClockAssumedQL OBJECT-TYPE This object allows to specify the assumed QL on the Telecom Slave. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the telecom slave's QL Mode is disabled and the telecom slave is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.29 | SSMQualityLevel | read-write | current |
| f3PtpPTPClockClockReceivedQL OBJECT-TYPE This object provides the Received QL value for the Telecom Slave. If the Telecom Slave's QL Mode is disabled, then the received QL value is not applicable. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.30 | SSMQualityLevel | read-only | current |
| f3PtpPTPClockStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.31 | StorageType | read-create | current |
| f3PtpPTPClockRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpPTPClockRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpPTPClockRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpPTPClockRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.19.1.32 | RowStatus | read-create | current |
| f3PtpPTPClockCurrentOffsetFromMaster OBJECT-TYPE This object provides the value for current offset from master. Note: the SYNTAX should be ScaledNanoseconds. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.33 | PerfCounter64 | read-only | current |
| f3PtpPTPClockRecentMeanPathDelay OBJECT-TYPE This object provides recent mean path delay. Note: the SYNTAX should be ScaledNanoseconds. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.34 | PerfCounter64 | read-only | current |
| f3PtpPTPClockRecentSyncPDV OBJECT-TYPE This object provides the recent Sync messages packet delay variation. Note: the SYNTAX should be ScaledNanoseconds. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.35 | PerfCounter64 | read-only | current |
| f3PtpPTPClockClockClass OBJECT-TYPE This object specify PTP Clock class | 1.3.6.1.4.1.2544.1.12.18.1.19.1.36 | Unsigned32 | read-only | current |
| f3PtpPTPClockPhysicalEntityIndex OBJECT-TYPE Populated with index into the physEntityTable (always point to left card slot in case of protection) | 1.3.6.1.4.1.2544.1.12.18.1.19.1.37 | Integer32 | read-only | current |
| f3PtpPTPClockActiveGrantsAnnounceService OBJECT-TYPE Report number of active grants announce service. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.38 | Integer32 | read-only | current |
| f3PtpPTPClockActiveGrantsSyncService OBJECT-TYPE Report number of active grants sync service. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.39 | Integer32 | read-only | current |
| f3PtpPTPClockActiveGrantsDelayRequestService OBJECT-TYPE Report number of active grants delay-request service. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.40 | Integer32 | read-only | current |
| f3PtpPTPClockMaxStepRemoved OBJECT-TYPE Local PTP Clock only qualify the announce message with the value less than configured. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.41 | Integer32 | read-write | current |
| f3PtpPTPClockServiceAvailableTime OBJECT-TYPE This object allows to manage service available time (seconds) for PTP. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.42 | Unsigned32 | read-only | current |
| f3PtpPTPClockServiceUnavailableTime OBJECT-TYPE This object allows to manage service unavailable time (seconds) for PTP. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.43 | Unsigned32 | read-only | current |
| f3PtpPTPClockServiceAvailablePercentage OBJECT-TYPE This object allows to manage service available in percentage [XXX.YY%] for PTP. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.44 | DisplayString | read-only | current |
| f3PtpPTPClockGrandMasterID OBJECT-TYPE Grandmaster Identity to be transmitted in IEEE_C37_238 TLV (2 bytes). Most significant byte is reserved and shall be 0. Configurable for grandmaster-capable devices only. Note: the range for c37-238-2011 is (3..254) | 1.3.6.1.4.1.2544.1.12.18.1.19.1.45 | Integer32 (0..65535) | read-write | current |
| f3PtpPTPClockTimeInaccuracy OBJECT-TYPE networkTimeInaccuracy to be transmitted in IEEE_C37_238 TLV. This value is set at the grandmaster-capable clocks. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.46 | Unsigned32 | read-write | current |
| f3PtpPTPClockNetworkTimeInaccuracy OBJECT-TYPE Maximum TimeInaccuracy that the device contributes to the networkTimeInaccuracy. | 1.3.6.1.4.1.2544.1.12.18.1.19.1.47 | Unsigned32 | read-write | current |
| f3PtpPTPPortTable OBJECT-TYPE A list of entries corresponding to the PTP PTP Port entities. | 1.3.6.1.4.1.2544.1.12.18.1.20 | not-accessible | current | |
| f3PtpPTPPortEntry OBJECT-TYPE An entry containing information applicable to a particular PTP Port Entity. | 1.3.6.1.4.1.2544.1.12.18.1.20.1 | not-accessible | current | |
| f3PtpPTPPortIndex OBJECT-TYPE Unique index value associated with the PTP Port Entity. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.1 | Integer32 | not-accessible | current |
| f3PtpPTPPortAdminState OBJECT-TYPE This object represents the Administrative State of the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.2 | AdminState | read-write | current |
| f3PtpPTPPortAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the PTP Port entity. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.3 | DisplayString (SIZE(0..256)) | read-write | current |
| f3PtpPTPPortOperationalState OBJECT-TYPE This object represents the Operational State of the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.4 | OperationalState | read-only | current |
| f3PtpPTPPortSecondaryState OBJECT-TYPE This object represents the Secondary State of the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.5 | SecondaryState | read-only | current |
| f3PtpPTPPortPeerPortIdentity OBJECT-TYPE This object specifies the Peer Port Identity of the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.6 | PortIdentity | read-only | current |
| f3PtpPTPPortLocalPriority OBJECT-TYPE This object allows configuration of local priority used by the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.7 | Unsigned32 (1..255) | read-write | current |
| f3PtpPTPPortPtpFlowPointEid OBJECT-TYPE This object associates the PTP Flow Point Eid. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.8 | VariablePointer | read-create | current |
| f3PtpPTPPortNotSlave OBJECT-TYPE This object indicate if PTP Port is slave. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.9 | TruthValue | read-create | deprecated |
| f3PtpPTPPortTxDestMacAddress OBJECT-TYPE This object specifies the Mac address of the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.10 | DestMacAddrType | read-create | current |
| f3PtpPTPPortSyncMessageRate OBJECT-TYPE This object allows specification of the PTP Port Sync Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.11 | SyncMessageRate | read-create | current |
| f3PtpPTPPortmDelayReqRespMsgRate OBJECT-TYPE This object allows specification of the PTP Port Delay Response Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.12 | DelayReqMessageRate | read-create | current |
| f3PtpPTPPortmAnnounceMsgRate OBJECT-TYPE This object allows specification of the PTP Port Announce Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.13 | AnnounceMessageRate | read-create | current |
| f3PtpPTPPortAnnounceReceiptTimeout OBJECT-TYPE This object allows specification of the PTP Port Announce Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.14 | Integer32 | read-write | current |
| f3PtpPTPPortSyncReceiptTimeout OBJECT-TYPE This object allows specification of the PTP Port Sync Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.15 | Integer32 | read-write | current |
| f3PtpPTPPortDelayRespTimeout OBJECT-TYPE This object allows specification of the PTP Port Delay Response Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.16 | Integer32 | read-write | current |
| f3PtpPTPPortPortState OBJECT-TYPE This object provides the PTP Port state. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.17 | PtpPortState | read-only | current |
| f3PtpPTPPortBmcaDecisionCode OBJECT-TYPE This object provides the PTP Port BMCA Role | 1.3.6.1.4.1.2544.1.12.18.1.20.1.18 | BMCARole | read-only | current |
| f3PtpPTPPortClockClass OBJECT-TYPE This object specify PTP Port class. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.19 | Unsigned32 | read-only | current |
| f3PtpPTPPortPeerPortMacAddress OBJECT-TYPE This attribute description PTP Port Mac Address. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.20 | MacAddress | read-only | current |
| f3PtpPTPPortRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpPTPPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpPTPPortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpPTPPortRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.20.1.21 | RowStatus | read-create | current |
| f3PtpPTPPortPortIdentity OBJECT-TYPE This object specifies the Port Identity of the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.22 | PortIdentity | read-only | current |
| f3PtpPTPPortMaxExpectedL2Slaves OBJECT-TYPE This object specifies the max number of l2 slaves of the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.23 | Unsigned32 | read-create | current |
| f3PtpPTPPortMasterClockType OBJECT-TYPE This object allows specification of the Master Clock Type of the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.24 | MasterClockType | read-create | current |
| f3PtpPTPPortLastRcvdAnnounceMsg OBJECT-TYPE This object specifies the last recieved announce message. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.25 | F3DisplayString | read-only | current |
| f3PtpPTPPortLastRcvdSyncMsg OBJECT-TYPE This object specifies the last recieved sync message. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.26 | F3DisplayString | read-only | current |
| f3PtpPTPPortLastRcvdDelayReqMsg OBJECT-TYPE This object specifies the last recieved delay request message. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.27 | F3DisplayString | read-only | current |
| f3PtpPTPPortLastRcvdDelayRspMsg OBJECT-TYPE This object specifies the last recieved response message. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.28 | F3DisplayString | read-only | current |
| f3PtpPTPPortMasterOnly OBJECT-TYPE This object indicate if PTP Port is master only. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.29 | TruthValue | read-create | current |
| f3PtpPTPPortIsProbingSlave OBJECT-TYPE This object indicate if PTP Port is probing slave. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.30 | TruthValue | read-create | current |
| f3PtpPTPPortPeerClockClass OBJECT-TYPE This object specify PTP Port peer clock class. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.31 | Unsigned32 | read-only | current |
| f3PtpPTPPortMinimumExpectedClockClass OBJECT-TYPE Note: This value is only applicable for a dynamic or slave port that is related to a PTP clock, either a boundary clock or slave clock. Otherwise, this field is not applicable (N/A) and cannot be configured. This object allows setting the minimum expected clock class value, which setes the minimum threshold for receiving packets. if the received clock clock class is greater than the expected clock class value, the packets for the grandmaster or boundary clock that are sending this clock class are dropped. In addition, an alarm called clock-class-mismatch is generated. The default is 247. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.32 | Integer32 (0..255) | read-write | current |
| f3PtpPTPPortDelayAsymmetryComp OBJECT-TYPE This object allows configuration of asymmetry delay compensation mode for L2 PTP slave on OSA540X. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.33 | CompensationMode | read-write | current |
| f3PtpPTPPortAutoAsymmetryCompStatus OBJECT-TYPE This object provides the automatic delay asymmetry compensation status for L2 PTP slave on OSA540X. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.34 | CompensationStatus | read-only | current |
| f3PtpPTPPortDelayAsymmetry OBJECT-TYPE This object is used for manual configuration of delay asymmetry in ns if delay asymmetry compensation is Manual. Or for indication of the measured delay asymmetry if delay asymmetry compensation is automatic. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.35 | Integer32 | read-write | current |
| f3PtpPTPPortVirtualPortCtrl OBJECT-TYPE This object indicate if PTP Port is virtual. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.36 | ToggleValue | read-create | current |
| f3PtpPTPPortDelayResponderType OBJECT-TYPE This object allows specification of the Delay Responder Type for the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.37 | MasterClockType | read-create | current |
| f3PtpPTPPortTimeTraceable OBJECT-TYPE This object indicate the Time Traceable for the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.38 | TruthValue | read-only | current |
| f3PtpPTPPortFrequencyTraceable OBJECT-TYPE This object indicate the Frequency Traceable for the PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.20.1.39 | TruthValue | read-only | current |
| f3PtpL2DynamicRemoteSlaveTable OBJECT-TYPE A list of entries corresponding L2 dynamic remote slaves. | 1.3.6.1.4.1.2544.1.12.18.1.21 | not-accessible | current | |
| f3PtpL2DynamicRemoteSlaveEntry OBJECT-TYPE An entry containing information applicable to a particular L2 Dynamic Remote Slave entity. | 1.3.6.1.4.1.2544.1.12.18.1.21.1 | not-accessible | current | |
| f3PtpL2DynamicRemoteSlaveIndex OBJECT-TYPE Unique index value associated with the Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.21.1.1 | Integer32 | not-accessible | current |
| f3PtpL2DynamicRemoteSlavePortIdentity OBJECT-TYPE This object represents the Port Identity of the L2 Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.21.1.2 | PortIdentity | read-only | current |
| f3PtpL2DynamicRemoteSlaveMacAddress OBJECT-TYPE This object allows specification of the Mac Address of the L2 Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.1.21.1.3 | MacAddress | read-only | current |
| f3PtpL2DynamicRemoteSlaveRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpL2DynamicRemoteSlaveRowStatus supported is destroy(6). The f3PtpL2DynamicRemoteSlaveRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.21.1.4 | RowStatus | read-create | current |
| f3PtpL2DynamicRemoteSlaveStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.21.1.5 | StorageType | read-create | current |
| f3PtpL2DynamicRemoteSlaveClockIdentity OBJECT-TYPE L2 Dynamic Remote Slave Clock Identity for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.21.1.6 | ClockIdentity | read-only | current |
| f3PtpMCIProtGroupTable OBJECT-TYPE A list of entries corresponding to the MCI Protection Groups. | 1.3.6.1.4.1.2544.1.12.18.1.22 | not-accessible | current | |
| f3PtpMCIProtGroupEntry OBJECT-TYPE An entry containing information applicable to a PTP MCI Protection Group. | 1.3.6.1.4.1.2544.1.12.18.1.22.1 | not-accessible | current | |
| f3PtpMCIProtGroupIndex OBJECT-TYPE Unique index value associated with the PTP MCI Protection Group entity. | 1.3.6.1.4.1.2544.1.12.18.1.22.1.1 | Integer32 | read-only | current |
| f3PtpMCIProtGroupAdminState OBJECT-TYPE This object represents the Administrative State of the PTP MCI Protection Group. | 1.3.6.1.4.1.2544.1.12.18.1.22.1.2 | AdminState | read-write | current |
| f3PtpMCIProtGroupActiveMember OBJECT-TYPE The corresponding OID of the Active Member in the PTP MCI Protection Group. | 1.3.6.1.4.1.2544.1.12.18.1.22.1.3 | VariablePointer | read-only | current |
| f3PtpMCIProtGroupLastSwitchOverTime OBJECT-TYPE The value of sysUpTime when last switch over occurred. | 1.3.6.1.4.1.2544.1.12.18.1.22.1.4 | TimeTicks | read-only | current |
| f3PtpMCIProtGroupLastSwitchOverReason OBJECT-TYPE The reason for last switch over in the PTP MCI Protection Group. | 1.3.6.1.4.1.2544.1.12.18.1.22.1.5 | CmGenPgSwitchoverReason | read-only | current |
| f3PtpMCIProtGroupStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.22.1.6 | StorageType | read-create | current |
| f3PtpMCIProtGroupRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpMCIProtGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpMCIProtGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpMCIProtGroupRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.22.1.7 | RowStatus | read-create | current |
| f3PtpMCIProtMemberTable OBJECT-TYPE A list of entries for the Ptp MCI Protection Group Members. | 1.3.6.1.4.1.2544.1.12.18.1.23 | not-accessible | current | |
| f3PtpMCIProtMemberEntry OBJECT-TYPE A conceptual row in the f3PtpMCIProtMemberTable. | 1.3.6.1.4.1.2544.1.12.18.1.23.1 | not-accessible | current | |
| f3PtpMCIProtMemberObject OBJECT-TYPE This object points to the Protection Group Member. | 1.3.6.1.4.1.2544.1.12.18.1.23.1.1 | VariablePointer | not-accessible | current |
| f3PtpMCIProtMemberStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.23.1.2 | StorageType | read-create | current |
| f3PtpMCIProtMemberRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpMCIProtMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpMCIProtMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpMCIProtMemberRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.23.1.3 | RowStatus | read-create | current |
| f3PtpTrafficPortFlowPointExtTable OBJECT-TYPE This table extends f3PtpTrafficPortFlowPointTable. | 1.3.6.1.4.1.2544.1.12.18.1.24 | not-accessible | current | |
| f3PtpTrafficPortFlowPointExtEntry OBJECT-TYPE A conceptual row in the f3PtpTrafficPortFlowPointExtTable. | 1.3.6.1.4.1.2544.1.12.18.1.24.1 | not-accessible | current | |
| f3PtpTrafficPortFlowPointBufferSize OBJECT-TYPE This object allows configuring the buffer size for the PTP FlowPoint's bandwidth profile. The default value is 16KB. | 1.3.6.1.4.1.2544.1.12.18.1.24.1.1 | Integer32 | read-write | current |
| f3PtpL3PTPPortTable OBJECT-TYPE A list of entries corresponding to the L3 PTP Port entities. | 1.3.6.1.4.1.2544.1.12.18.1.25 | not-accessible | current | |
| f3PtpL3PTPPortEntry OBJECT-TYPE An entry containing information applicable to a particular L3 PTP Port Entity. | 1.3.6.1.4.1.2544.1.12.18.1.25.1 | not-accessible | current | |
| f3PtpL3PTPPortIndex OBJECT-TYPE Unique index value associated with the L3 PTP Port Entity. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.1 | Integer32 | not-accessible | current |
| f3PtpL3PTPPortAdminState OBJECT-TYPE This object represents the Administrative State of the L3 PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.2 | AdminState | read-write | current |
| f3PtpL3PTPPortAlias OBJECT-TYPE This object allows SNMP management entities to provide an alias to the L3 PTP Port entity. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.3 | DisplayString (SIZE(0..256)) | read-write | current |
| f3PtpL3PTPPortOperationalState OBJECT-TYPE This object represents the Operational State of the L3 PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.4 | OperationalState | read-only | current |
| f3PtpL3PTPPortSecondaryState OBJECT-TYPE This object represents the Secondary State of the L3 PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.5 | SecondaryState | read-only | current |
| f3PtpL3PTPPortPortIdentity OBJECT-TYPE This object specifies the Port Identity of the L3 PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.6 | PortIdentity | read-only | current |
| f3PtpL3PTPPortLocalPriority OBJECT-TYPE This object allows configuration of local priority used by the L3 PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.7 | Unsigned32 (1..255) | read-write | current |
| f3PtpL3PTPPortPtpFlowPointEid OBJECT-TYPE This object associates the PTP Flow Point Eid. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.8 | VariablePointer | read-create | current |
| f3PtpL3PTPPortSyncMessageRate OBJECT-TYPE This object allows specification of the L3 PTP Port Sync Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.9 | SyncMessageRate | read-create | current |
| f3PtpL3PTPPortDelayReqRespMsgRate OBJECT-TYPE This object allows specification of the L3 PTP Port Delay Response Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.10 | DelayReqMessageRate | read-create | current |
| f3PtpL3PTPPortAnnounceMsgRate OBJECT-TYPE This object allows specification of the L3 PTP Port Announce Message Rate. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.11 | AnnounceMessageRate | read-create | current |
| f3PtpL3PTPPortAnnounceReceiptTimeout OBJECT-TYPE This object allows specification of the L3 PTP Port Announce Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.12 | Integer32 (2..255) | read-write | current |
| f3PtpL3PTPPortSyncReceiptTimeout OBJECT-TYPE This object allows specification of the L3 PTP Port Sync Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.13 | Integer32 (2..128) | read-write | current |
| f3PtpL3PTPPortDelayRespTimeout OBJECT-TYPE This object allows specification of the L3 PTP Port Delay Response Message Receipt Timeout. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.14 | Integer32 (2..128) | read-write | current |
| f3PtpL3PTPPortPortState OBJECT-TYPE This object provides the L3 PTP Port state. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.15 | PtpPortState | read-only | current |
| f3PtpL3PTPPortBmcaDecisionCode OBJECT-TYPE This object provides the L3 PTP Port BMCA Role | 1.3.6.1.4.1.2544.1.12.18.1.25.1.16 | BMCARole | read-only | current |
| f3PtpL3PTPPortPeerClockClass OBJECT-TYPE This object specify L3 PTP Port class. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.17 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortMinimumExpectedClockClass OBJECT-TYPE Note: This value is only applicable for a dynamic or slave port that is related to a PTP clock, either a boundary clock or slave clock. Otherwise, this field is not applicable (N/A) and cannot be configured. This object allows setting the minimum expected clock class value, which setes the minimum threshold for receiving packets. if the received clock clock class is greater than the expected clock class value, the packets for the grandmaster or boundary clock that are sending this clock class are dropped. In addition, an alarm called clock-class-mismatch is generated. The default is 247. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.18 | Integer32 (0..255) | read-write | current |
| f3PtpL3PTPPortIpProtocol OBJECT-TYPE This object allows specification of the IP Protocol of the L3 PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.19 | IpVersion | read-create | current |
| f3PtpL3PTPPortIfName OBJECT-TYPE This object allows SNMP management entities to provide a name to the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.20 | DisplayString (SIZE(1..15)) | read-create | current |
| f3PtpL3PTPPortIpPriorityMapMode OBJECT-TYPE This object enables specification of Priority Mapping Mode for the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.21 | IpPriorityMapMode | read-create | current |
| f3PtpL3PTPPortIpPriority OBJECT-TYPE This object enables specification of Priority Value for the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.22 | Integer32 (0..63) | read-create | current |
| f3PtpL3PTPPortIpV4Address OBJECT-TYPE This object allows specification of the IPv4 Address of the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.23 | IpAddress | read-create | current |
| f3PtpL3PTPPortIpV4SubnetMask OBJECT-TYPE This object allows specification of the IPv4 Subnet Mask of the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.24 | IpAddress | read-create | current |
| f3PtpL3PTPPortIpV6Address OBJECT-TYPE This object allows specification of the unicast ipv6 Address of the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.25 | Ipv6Address | read-create | current |
| f3PtpL3PTPPortIpV6AddrPrefixLength OBJECT-TYPE This object allows specification of the unicast IPv6 address prefix length of the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.26 | Integer32 | read-create | current |
| f3PtpL3PTPPortDefaultGatewayControl OBJECT-TYPE This attribute control Gateway address for the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.27 | ToggleValue | read-create | current |
| f3PtpL3PTPPortGateway OBJECT-TYPE This object allows specification of the IPv4 Gateway Address of the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.28 | IpAddress | read-create | current |
| f3PtpL3PTPPortIpV6Gateway OBJECT-TYPE This object allows specification of the IPv6 Gateway Address of the L3 PTP Port IP interface. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.29 | Ipv6Address | read-create | current |
| f3PtpL3PTPPortUnicastMessageNegEnabled OBJECT-TYPE This object must be used to specify whether Unicast Message Negotiation is enabled for the L3 PTP Port. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.30 | TruthValue | read-create | current |
| f3PtpL3PTPPortTransmitDuration OBJECT-TYPE This object specifices Duration Field in the REQUEST_UNICAST_TRANSMISSION_TLV. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.31 | Integer32 (60..1000) | read-write | current |
| f3PtpL3PTPPortRequestUnicastTimeout OBJECT-TYPE This object allows specification of the Request Unicast Timeout in seconds. Unicast transmission is termed as failed when this timeout occurs. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.32 | Integer32 (1..600) | read-write | current |
| f3PtpL3PTPPortRequestUnicastRestartTimer OBJECT-TYPE This object allows specification of the time (in seconds) to wait to restart the Request Unicast signalling. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.33 | Integer32 (30..1800) | read-write | current |
| f3PtpL3PTPPortMasterIpV4Address OBJECT-TYPE This object allows specification of the IPv4 Address of the PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.34 | IpAddress | read-create | current |
| f3PtpL3PTPPortMasterIpV6Address OBJECT-TYPE This object allows specification of the unicast ipv6 Address of the PTP Master. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.35 | Ipv6Address | read-create | current |
| f3PtpL3PTPPortDelayAsymmetryComp OBJECT-TYPE This object allows configuration of asymmetry delay compensation mode. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.36 | CompensationMode | read-write | current |
| f3PtpL3PTPPortAutoAsymmetryCompStatus OBJECT-TYPE This object provides the automatic delay asymmetry compensation status. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.37 | CompensationStatus | read-only | current |
| f3PtpL3PTPPortDelayAsymmetry OBJECT-TYPE This object is used for manual configuration of delay asymmetry in ns if delay asymmetry compensation is Manual. Or for indication of the measured delay asymmetry if delay asymmetry compensation is automatic. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.38 | Integer32 (-10000000..10000000) | read-write | current |
| f3PtpL3PTPPortStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.18.1.25.1.39 | StorageType | read-create | current |
| f3PtpL3PTPPortRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PtpPTPPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3PtpPTPPortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PtpPTPPortRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.18.1.25.1.40 | RowStatus | read-create | current |
| f3PtpPerformanceObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.18.2 | |||
| f3PtpAccPortFlowPointStatsTable OBJECT-TYPE A collection of Access Port PTP Flow Point statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.1 | not-accessible | current | |
| f3PtpAccPortFlowPointStatsEntry OBJECT-TYPE A conceptual row in the f3PtpAccPortFlowPointStatsTable. Entries exist in this table for each Access Port Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1 | not-accessible | current | |
| f3PtpAccPortFlowPointStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Access Port PTP Flow Point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.1.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpAccPortFlowPointStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.2 | CmPmIntervalType | read-only | current |
| f3PtpAccPortFlowPointStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.3 | TruthValue | read-only | current |
| f3PtpAccPortFlowPointStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.4 | CmPmBinAction | read-write | current |
| f3PtpAccPortFlowPointStatsAnnouncesRx OBJECT-TYPE Number of PTP Announce messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.5 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsAnnouncesTx OBJECT-TYPE Number of Announce Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.6 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsSyncsRx OBJECT-TYPE Number of Sync Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.7 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsSyncsTx OBJECT-TYPE Number of Sync Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.8 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsFollowupsRx OBJECT-TYPE Number of Follow up Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.9 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsFollowupsTx OBJECT-TYPE Number of Follow up Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.10 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsDelayReqsRx OBJECT-TYPE Number of Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.11 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsDelayReqsTx OBJECT-TYPE Number of Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.12 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsDelayRspsRx OBJECT-TYPE Number of Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.13 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsDelayRspsTx OBJECT-TYPE Number of Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.14 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsPDelayReqsRx OBJECT-TYPE Number of Peer Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.15 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsPDelayReqsTx OBJECT-TYPE Number of Peer Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.16 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsPDelayRspsRx OBJECT-TYPE Number of Peer Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.17 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsPDelayRspsTx OBJECT-TYPE Number of Peer Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.18 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsPDelayRspFollowupsRx OBJECT-TYPE Number of Peer Delay Response Followup Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.19 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsPDelayRspFollowupsTx OBJECT-TYPE Number of Peer Delay Response Followup Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.20 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsSignalingRx OBJECT-TYPE Number of PTP Signaling Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.21 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsSignalingTx OBJECT-TYPE Number of PTP Signaling Messages Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.22 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsMgmtFramesRx OBJECT-TYPE Number of PTP Management Frames received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.23 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsMgmtFramesTx OBJECT-TYPE Number of PTP Management Frames Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.24 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsPtpUnknownsRx OBJECT-TYPE Number of Unknown PTP Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.25 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsPtpUnknownsTx OBJECT-TYPE Number of Unknown PTP Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.26 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointStatsMinSyncResTime OBJECT-TYPE The minimum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.27 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsMaxSyncResTime OBJECT-TYPE The maximum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.28 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsAvgSyncResTime OBJECT-TYPE The average residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.29 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsMinDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.30 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsMaxDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.31 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsAvgDelayReqResTime OBJECT-TYPE The average residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.32 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsMinPDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.33 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsMaxPDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.34 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsAvgPDelayReqResTime OBJECT-TYPE The average residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.35 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsMinPDelayRspResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.36 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsMaxPDelayRspResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.37 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsAvgPDelayRspResTime OBJECT-TYPE The average residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.38 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointStatsDestMciNoMatchDiscards OBJECT-TYPE The dest MCI no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.39 | PerfCounter64 | read-write | current |
| f3PtpAccPortFlowPointStatsTagNoMatchDiscards OBJECT-TYPE The tag no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.1.1.40 | PerfCounter64 | read-write | current |
| f3PtpAccPortFlowPointHistoryTable OBJECT-TYPE A collection of Access Port PTP Flow Point history statistics. These reflect the history data. | 1.3.6.1.4.1.2544.1.12.18.2.2 | not-accessible | current | |
| f3PtpAccPortFlowPointHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpAccPortFlowPointHistoryTable. Entries exist in this table for each Access Port Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1 | not-accessible | current | |
| f3PtpAccPortFlowPointHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Ethernet Access Port PTP Flow point PM history entry. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.1 | Integer32 (1..32) | not-accessible | current |
| f3PtpAccPortFlowPointHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.2 | DateAndTime | read-only | current |
| f3PtpAccPortFlowPointHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.3 | TruthValue | read-only | current |
| f3PtpAccPortFlowPointHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.4 | CmPmBinAction | read-write | current |
| f3PtpAccPortFlowPointHistoryAnnouncesRx OBJECT-TYPE Number of PTP Announce messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.5 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryAnnouncesTx OBJECT-TYPE Number of Announce Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.6 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistorySyncsRx OBJECT-TYPE Number of Sync Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.7 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistorySyncsTx OBJECT-TYPE Number of Sync Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.8 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryFollowupsRx OBJECT-TYPE Number of Follow up Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.9 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryFollowupsTx OBJECT-TYPE Number of Follow up Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.10 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryDelayReqsRx OBJECT-TYPE Number of Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.11 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryDelayReqsTx OBJECT-TYPE Number of Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.12 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryDelayRspsRx OBJECT-TYPE Number of Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.13 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryDelayRspsTx OBJECT-TYPE Number of Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.14 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryPDelayReqsRx OBJECT-TYPE Number of Peer Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.15 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryPDelayReqsTx OBJECT-TYPE Number of Peer Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.16 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryPDelayRspsRx OBJECT-TYPE Number of Peer Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.17 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryPDelayRspsTx OBJECT-TYPE Number of Peer Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.18 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryPDelayRspFollowupsRx OBJECT-TYPE Number of Peer Delay Response Followup Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.19 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryPDelayRspFollowupsTx OBJECT-TYPE Number of Peer Delay Response Followup Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.20 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistorySignalingRx OBJECT-TYPE Number of PTP Signaling Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.21 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistorySignalingTx OBJECT-TYPE Number of PTP Signaling Messages Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.22 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryMgmtFramesRx OBJECT-TYPE Number of PTP Management Frames received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.23 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryMgmtFramesTx OBJECT-TYPE Number of PTP Management Frames Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.24 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryPtpUnknownsRx OBJECT-TYPE Number of Unknown PTP Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.25 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryPtpUnknownsTx OBJECT-TYPE Number of Unknown PTP Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.26 | PerfCounter64 | read-only | current |
| f3PtpAccPortFlowPointHistoryMinSyncResTime OBJECT-TYPE The minimum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.27 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryMaxSyncResTime OBJECT-TYPE The maximum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.28 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryAvgSyncResTime OBJECT-TYPE The average residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.29 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryMinDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.30 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryMaxDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.31 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryAvgDelayReqResTime OBJECT-TYPE The average residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.32 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryMinPDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.33 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryMaxPDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.34 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryAvgPDelayReqResTime OBJECT-TYPE The average residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.35 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryMinPDelayRspResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.36 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryMaxPDelayRspResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.37 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryAvgPDelayRspResTime OBJECT-TYPE The average residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.38 | Unsigned32 | read-only | deprecated |
| f3PtpAccPortFlowPointHistoryDestMciNoMatchDiscards OBJECT-TYPE The dest MCI no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.39 | PerfCounter64 | read-write | current |
| f3PtpAccPortFlowPointHistoryTagNoMatchDiscards OBJECT-TYPE The tag no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.2.1.40 | PerfCounter64 | read-write | current |
| f3PtpAccPortFlowPointThresholdTable OBJECT-TYPE A table of entries that allow manageability of Access Port PTP Flow Point Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.3 | not-accessible | current | |
| f3PtpAccPortFlowPointThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpAccPortFlowPointThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.3.1 | not-accessible | current | |
| f3PtpAccPortFlowPointThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpAccPortFlowPointThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.3.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpAccPortFlowPointThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.3.1.2 | CmPmIntervalType | read-only | current |
| f3PtpAccPortFlowPointThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.3.1.3 | VariablePointer | read-only | current |
| f3PtpAccPortFlowPointThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.3.1.4 | Unsigned32 | read-write | current |
| f3PtpAccPortFlowPointThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.3.1.5 | Unsigned32 | read-write | current |
| f3PtpAccPortFlowPointThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpAccPortFlowPointThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.3.1.6 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsTable OBJECT-TYPE A collection of Network Port PTP Flow Point statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.4 | not-accessible | current | |
| f3PtpNetPortFlowPointStatsEntry OBJECT-TYPE A conceptual row in the f3PtpNetPortFlowPointStatsTable. Entries exist in this table for each Network Port Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1 | not-accessible | current | |
| f3PtpNetPortFlowPointStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Network Port PTP Flow Point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.4.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpNetPortFlowPointStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.2 | CmPmIntervalType | read-only | current |
| f3PtpNetPortFlowPointStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.3 | TruthValue | read-only | current |
| f3PtpNetPortFlowPointStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.4 | CmPmBinAction | read-write | current |
| f3PtpNetPortFlowPointStatsAnnouncesRx OBJECT-TYPE Number of PTP Announce messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.5 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsAnnouncesTx OBJECT-TYPE Number of Announce Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.6 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsSyncsRx OBJECT-TYPE Number of Sync Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.7 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsSyncsTx OBJECT-TYPE Number of Sync Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.8 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsFollowupsRx OBJECT-TYPE Number of Follow up Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.9 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsFollowupsTx OBJECT-TYPE Number of Follow up Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.10 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsDelayReqsRx OBJECT-TYPE Number of Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.11 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsDelayReqsTx OBJECT-TYPE Number of Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.12 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsDelayRspsRx OBJECT-TYPE Number of Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.13 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsDelayRspsTx OBJECT-TYPE Number of Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.14 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsPDelayReqsRx OBJECT-TYPE Number of Peer Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.15 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsPDelayReqsTx OBJECT-TYPE Number of Peer Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.16 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsPDelayRspsRx OBJECT-TYPE Number of Peer Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.17 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsPDelayRspsTx OBJECT-TYPE Number of Peer Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.18 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsPDelayRspFollowupsRx OBJECT-TYPE Number of Peer Delay Response Followup Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.19 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsPDelayRspFollowupsTx OBJECT-TYPE Number of Peer Delay Response Followup Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.20 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsSignalingRx OBJECT-TYPE Number of PTP Signaling Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.21 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsSignalingTx OBJECT-TYPE Number of PTP Signaling Messages Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.22 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsMgmtFramesRx OBJECT-TYPE Number of PTP Management Frames received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.23 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsMgmtFramesTx OBJECT-TYPE Number of PTP Management Frames Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.24 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsPtpUnknownsRx OBJECT-TYPE Number of Unknown PTP Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.25 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsPtpUnknownsTx OBJECT-TYPE Number of Unknown PTP Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.26 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointStatsAvgSyncResTime OBJECT-TYPE The average residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.27 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsMinSyncResTime OBJECT-TYPE The minimum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.28 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsMaxSyncResTime OBJECT-TYPE The maximum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.29 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsAvgDelayReqResTime OBJECT-TYPE The average residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.30 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsMinDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.31 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsMaxDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.32 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsMinPDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.33 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsMaxPDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.34 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsAvgPDelayReqResTime OBJECT-TYPE The average residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.35 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsMinPDelayRspResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.36 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsMaxPDelayRspResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.37 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsAvgPDelayRspResTime OBJECT-TYPE The average residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.38 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointStatsDestMciNoMatchDiscards OBJECT-TYPE The dest MCI no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.39 | PerfCounter64 | read-write | current |
| f3PtpNetPortFlowPointStatsTagNoMatchDiscards OBJECT-TYPE The tag no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.4.1.40 | PerfCounter64 | read-write | current |
| f3PtpNetPortFlowPointHistoryTable OBJECT-TYPE A collection of Network Port PTP Flow Point history statistics. These reflect the history data. | 1.3.6.1.4.1.2544.1.12.18.2.5 | not-accessible | current | |
| f3PtpNetPortFlowPointHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpNetPortFlowPointHistoryTable. Entries exist in this table for each Network Port Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1 | not-accessible | current | |
| f3PtpNetPortFlowPointHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Ethernet Network Port PTP Flow point PM history entry. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.1 | Integer32 (1..32) | not-accessible | current |
| f3PtpNetPortFlowPointHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.2 | DateAndTime | read-only | current |
| f3PtpNetPortFlowPointHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.3 | TruthValue | read-only | current |
| f3PtpNetPortFlowPointHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.4 | CmPmBinAction | read-write | current |
| f3PtpNetPortFlowPointHistoryAnnouncesRx OBJECT-TYPE Number of PTP Announce messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.5 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryAnnouncesTx OBJECT-TYPE Number of Announce Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.6 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistorySyncsRx OBJECT-TYPE Number of Sync Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.7 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistorySyncsTx OBJECT-TYPE Number of Sync Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.8 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryFollowupsRx OBJECT-TYPE Number of Follow up Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.9 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryFollowupsTx OBJECT-TYPE Number of Follow up Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.10 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryDelayReqsRx OBJECT-TYPE Number of Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.11 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryDelayReqsTx OBJECT-TYPE Number of Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.12 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryDelayRspsRx OBJECT-TYPE Number of Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.13 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryDelayRspsTx OBJECT-TYPE Number of Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.14 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryPDelayReqsRx OBJECT-TYPE Number of Peer Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.15 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryPDelayReqsTx OBJECT-TYPE Number of Peer Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.16 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryPDelayRspsRx OBJECT-TYPE Number of Peer Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.17 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryPDelayRspsTx OBJECT-TYPE Number of Peer Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.18 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryPDelayRspFollowupsRx OBJECT-TYPE Number of Peer Delay Response Followup Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.19 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryPDelayRspFollowupsTx OBJECT-TYPE Number of Peer Delay Response Followup Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.20 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistorySignalingRx OBJECT-TYPE Number of PTP Signaling Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.21 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistorySignalingTx OBJECT-TYPE Number of PTP Signaling Messages Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.22 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryMgmtFramesRx OBJECT-TYPE Number of PTP Management Frames received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.23 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryMgmtFramesTx OBJECT-TYPE Number of PTP Management Frames Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.24 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryPtpUnknownsRx OBJECT-TYPE Number of Unknown PTP Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.25 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryPtpUnknownsTx OBJECT-TYPE Number of Unknown PTP Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.26 | PerfCounter64 | read-only | current |
| f3PtpNetPortFlowPointHistoryAvgSyncResTime OBJECT-TYPE The average residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.27 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryMinSyncResTime OBJECT-TYPE The minimum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.28 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryMaxSyncResTime OBJECT-TYPE The maximum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.29 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryAvgDelayReqResTime OBJECT-TYPE The average residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.30 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryMinDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.31 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryMaxDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.32 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryMinPDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.33 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryMaxPDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.34 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryAvgPDelayReqResTime OBJECT-TYPE The average residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.35 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryMinPDelayRspResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.36 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryMaxPDelayRspResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.37 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryAvgPDelayRspResTime OBJECT-TYPE The average residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.38 | Unsigned32 | read-only | deprecated |
| f3PtpNetPortFlowPointHistoryDestMciNoMatchDiscards OBJECT-TYPE The dest MCI no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.39 | PerfCounter64 | read-write | current |
| f3PtpNetPortFlowPointHistoryTagNoMatchDiscards OBJECT-TYPE The Tag no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.5.1.40 | PerfCounter64 | read-write | current |
| f3PtpNetPortFlowPointThresholdTable OBJECT-TYPE A table of entries that allow manageability of Access Port PTP Flow Point Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.6 | not-accessible | current | |
| f3PtpNetPortFlowPointThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpNetPortFlowPointThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.6.1 | not-accessible | current | |
| f3PtpNetPortFlowPointThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpNetPortFlowPointThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.6.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpNetPortFlowPointThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.6.1.2 | CmPmIntervalType | read-only | current |
| f3PtpNetPortFlowPointThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.6.1.3 | VariablePointer | read-only | current |
| f3PtpNetPortFlowPointThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.6.1.4 | Unsigned32 | read-write | current |
| f3PtpNetPortFlowPointThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.6.1.5 | Unsigned32 | read-write | current |
| f3PtpNetPortFlowPointThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpNetPortFlowPointThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.6.1.6 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsTable OBJECT-TYPE A collection of Slave Only Ordinary Clock related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.7 | not-accessible | current | |
| f3PtpSOOCStatsEntry OBJECT-TYPE A conceptual row in the f3PtpSOOCStatsTable. Entries exist in this table for each Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.2.7.1 | not-accessible | current | |
| f3PtpSOOCStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Slave Only Ordinary Clock statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.7.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpSOOCStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.2 | CmPmIntervalType | read-only | current |
| f3PtpSOOCStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.3 | TruthValue | read-only | current |
| f3PtpSOOCStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.4 | CmPmBinAction | read-write | current |
| f3PtpSOOCStatsMinOffsetFromMaster OBJECT-TYPE Minimum Offset from Master | 1.3.6.1.4.1.2544.1.12.18.2.7.1.5 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsMaxOffsetFromMaster OBJECT-TYPE Maximum Offset from Master | 1.3.6.1.4.1.2544.1.12.18.2.7.1.6 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsAvgOffsetFromMaster OBJECT-TYPE Average Offset from Master | 1.3.6.1.4.1.2544.1.12.18.2.7.1.7 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsMinMeanPathDelay OBJECT-TYPE The minimum mean path delay at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.8 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsMaxMeanPathDelay OBJECT-TYPE The maximum mean path delay at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.9 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsAvgMeanPathDelay OBJECT-TYPE The average mean path delay at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.10 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsMinSyncPathDelay OBJECT-TYPE The minimum mean path delay of Sync messages at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.11 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsMaxSyncPathDelay OBJECT-TYPE The maximum mean path delay of Sync messages at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.12 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsAvgSyncPathDelay OBJECT-TYPE The average mean path delay of Sync messages at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.13 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsMinSyncPDV OBJECT-TYPE The minimum Sync message path delay variation at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.14 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsMaxSyncPDV OBJECT-TYPE The maximum Sync message path delay variation at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.15 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsAvgSyncPDV OBJECT-TYPE The average Sync message packet delay variation at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.16 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCStatsMgmtMsgsDiscarded OBJECT-TYPE The number of PTP management messages discarded at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.17 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsInvalidMsgLenDiscards OBJECT-TYPE The number of messages discarded due to invalid message length at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.18 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsUnknownMasterDiscards OBJECT-TYPE The number of messages discard due to unknown Master at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.19 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsUnknownDomainDiscards OBJECT-TYPE The number of messages discard due to unknown domain at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.20 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsMulticastAnnounceDiscards OBJECT-TYPE The number of multicast Announce message discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.21 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsOutOfSeqAnnounceMsgs OBJECT-TYPE The number of out-of-sequence Announce message discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.22 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsMulticastSyncDiscards OBJECT-TYPE The number of Multicast Sync discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.23 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsTwoStepSyncDiscards OBJECT-TYPE The number of Two Step Sync discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.24 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsFollowupDiscards OBJECT-TYPE The number of Follow up discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.25 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsDelayReqDiscards OBJECT-TYPE The number of Delay Request discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.26 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsPDelayReqDiscards OBJECT-TYPE The number of P-Delay Request discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.27 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsPDelayRspDiscards OBJECT-TYPE The number of P-Delay Response discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.28 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsPDelayFollowupDiscards OBJECT-TYPE The number of P-Delay Followup discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.29 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsInvalidTLVLenDiscards OBJECT-TYPE The number of discards due to invalid TLV Length at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.30 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsInvalidTLVTypeDiscards OBJECT-TYPE The number of discards due to invalid TLV type at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.31 | PerfCounter64 | read-only | current |
| f3PtpSOOCStatsMaxFwdFlowWeight OBJECT-TYPE The max forward flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.32 | Integer32 | read-write | current |
| f3PtpSOOCStatsAvgFwdFlowWeight OBJECT-TYPE The average forward flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.33 | Integer32 | read-write | current |
| f3PtpSOOCStatsMinRevFlowWeight OBJECT-TYPE The min reverted flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.34 | Integer32 | read-write | current |
| f3PtpSOOCStatsMaxRevFlowWeight OBJECT-TYPE The max reverted flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.35 | Integer32 | read-write | current |
| f3PtpSOOCStatsAvgRevFlowWeight OBJECT-TYPE The average reverted flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.36 | Integer32 | read-write | current |
| f3PtpSOOCStatsNumClockRecTransients OBJECT-TYPE The number of clock recovery transients for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.7.1.37 | Unsigned32 | read-write | current |
| f3PtpSOOCHistoryTable OBJECT-TYPE A collection of Slave Only Ordinary Clock related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.8 | not-accessible | current | |
| f3PtpSOOCHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpSOOCHistoryTable. Entries exist in this table for each Slave Only Ordinary Clock. | 1.3.6.1.4.1.2544.1.12.18.2.8.1 | not-accessible | current | |
| f3PtpSOOCHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Slave Only Ordinary Clock statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.1 | Integer32 (1..32) | not-accessible | current |
| f3PtpSOOCHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.2 | DateAndTime | read-only | current |
| f3PtpSOOCHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.3 | TruthValue | read-only | current |
| f3PtpSOOCHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.4 | CmPmBinAction | read-write | current |
| f3PtpSOOCHistoryMinOffsetFromMaster OBJECT-TYPE Minimum Offset from Master | 1.3.6.1.4.1.2544.1.12.18.2.8.1.5 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryMaxOffsetFromMaster OBJECT-TYPE Maximum Offset from Master | 1.3.6.1.4.1.2544.1.12.18.2.8.1.6 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryAvgOffsetFromMaster OBJECT-TYPE Average Offset from Master | 1.3.6.1.4.1.2544.1.12.18.2.8.1.7 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryMinMeanPathDelay OBJECT-TYPE The minimum mean path delay at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.8 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryMaxMeanPathDelay OBJECT-TYPE The maximum mean path delay at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.9 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryAvgMeanPathDelay OBJECT-TYPE The average mean path delay at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.10 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryMinSyncPathDelay OBJECT-TYPE The minimum mean path delay of Sync messages at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.11 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryMaxSyncPathDelay OBJECT-TYPE The maximum mean path delay of Sync messages at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.12 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryAvgSyncPathDelay OBJECT-TYPE The average mean path delay of Sync messages at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.13 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryMinSyncPDV OBJECT-TYPE The minimum Sync message path delay variation at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.14 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryMaxSyncPDV OBJECT-TYPE The maximum Sync message path delay variation at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.15 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryAvgSyncPDV OBJECT-TYPE The average Sync message packet delay variation at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.16 | ScaledNanoseconds | read-only | current |
| f3PtpSOOCHistoryMgmtMsgsDiscarded OBJECT-TYPE The number of PTP management messages discarded at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.17 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryInvalidMsgLenDiscards OBJECT-TYPE The number of messages discarded due to invalid message length at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.18 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryUnknownMasterDiscards OBJECT-TYPE The number of messages discard due to unknown Master at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.19 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryUnknownDomainDiscards OBJECT-TYPE The number of messages discard due to unknown domain at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.20 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryMulticastAnnounceDiscards OBJECT-TYPE The number of multicast Announce message discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.21 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryOutOfSeqAnnounceMsgs OBJECT-TYPE The number of out-of-sequence Announce message discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.22 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryMulticastSyncDiscards OBJECT-TYPE The number of Multicast Sync discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.23 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryTwoStepSyncDiscards OBJECT-TYPE The number of Two Step Sync discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.24 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryFollowupDiscards OBJECT-TYPE The number of Follow up discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.25 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryDelayReqDiscards OBJECT-TYPE The number of Delay Request discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.26 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryPDelayReqDiscards OBJECT-TYPE The number of P-Delay Request discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.27 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryPDelayRspDiscards OBJECT-TYPE The number of P-Delay Response discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.28 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryPDelayFollowupDiscards OBJECT-TYPE The number of P-Delay Followup discards at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.29 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryInvalidTLVLenDiscards OBJECT-TYPE The number of discards due to invalid TLV Length at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.30 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryInvalidTLVTypeDiscards OBJECT-TYPE The number of discards due to invalid TLV type at the SOOC. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.31 | PerfCounter64 | read-only | current |
| f3PtpSOOCHistoryMaxFwdFlowWeight OBJECT-TYPE The max forward flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.32 | Integer32 | read-write | current |
| f3PtpSOOCHistoryAvgFwdFlowWeight OBJECT-TYPE The average forward flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.33 | Integer32 | read-write | current |
| f3PtpSOOCHistoryMinRevFlowWeight OBJECT-TYPE The min reverted flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.34 | Integer32 | read-write | current |
| f3PtpSOOCHistoryMaxRevFlowWeight OBJECT-TYPE The max reverted flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.35 | Integer32 | read-write | current |
| f3PtpSOOCHistoryAvgRevFlowWeight OBJECT-TYPE The average reverted flow weight for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.36 | Integer32 | read-write | current |
| f3PtpSOOCHistoryNumClockRecTransients OBJECT-TYPE The number of clock recovery transients for this entry. | 1.3.6.1.4.1.2544.1.12.18.2.8.1.37 | Unsigned32 | read-write | current |
| f3PtpSOOCThresholdTable OBJECT-TYPE A table of entries that allow manageability of Slave Only Ordinary Clock Thresholds. Below MonTypes should be treated as nanoseconds despite being ScaledNanoseconds in Stats and History: - f3PtpSOOCStatsMinOffsetFromMaster, - f3PtpSOOCStatsMaxOffsetFromMaster, - f3PtpSOOCStatsAvgOffsetFromMaster, - f3PtpSOOCStatsMinMeanPathDelay, - f3PtpSOOCStatsMaxMeanPathDelay, - f3PtpSOOCStatsAvgMeanPathDelay, - f3PtpSOOCStatsMinSyncPathDelay, - f3PtpSOOCStatsMaxSyncPathDelay, - f3PtpSOOCStatsAvgSyncPathDelay, - f3PtpSOOCStatsMinSyncPDV, - f3PtpSOOCStatsMaxSyncPDV, - f3PtpSOOCStatsAvgSyncPDV | 1.3.6.1.4.1.2544.1.12.18.2.9 | not-accessible | current | |
| f3PtpSOOCThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpSOOCThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.9.1 | not-accessible | current | |
| f3PtpSOOCThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpSOOCThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.9.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpSOOCThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.9.1.2 | CmPmIntervalType | read-only | current |
| f3PtpSOOCThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.9.1.3 | VariablePointer | read-only | current |
| f3PtpSOOCThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.9.1.4 | Unsigned32 | read-write | current |
| f3PtpSOOCThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.9.1.5 | Unsigned32 | read-write | current |
| f3PtpSOOCThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpSOOCThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.9.1.6 | PerfCounter64 | read-only | current |
| f3PtpTSStatsTable OBJECT-TYPE A collection of Telecom Slave related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.10 | not-accessible | current | |
| f3PtpTSStatsEntry OBJECT-TYPE A conceptual row in the f3PtpTSStatsTable. Entries exist in this table for each Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.2.10.1 | not-accessible | current | |
| f3PtpTSStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Telecom Slave statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.10.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpTSStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.2 | CmPmIntervalType | read-only | current |
| f3PtpTSStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.3 | TruthValue | read-only | current |
| f3PtpTSStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.4 | CmPmBinAction | read-write | current |
| f3PtpTSStatsTotalTimeCR5 OBJECT-TYPE Total Time in seconds Clock Recovery Score is 5. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.5 | Unsigned32 | read-only | current |
| f3PtpTSStatsTotalTimeCR4 OBJECT-TYPE Total Time in seconds Clock Recovery Score is 4. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.6 | Unsigned32 | read-only | current |
| f3PtpTSStatsTotalTimeCR3 OBJECT-TYPE Total Time in seconds Clock Recovery Score is 3. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.7 | Unsigned32 | read-only | current |
| f3PtpTSStatsTotalTimePR5 OBJECT-TYPE Total Time in seconds Phase Recovery Score is 5. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.8 | Unsigned32 | read-only | current |
| f3PtpTSStatsTotalTimePR4 OBJECT-TYPE Total Time in seconds Phase Recovery Score is 4. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.9 | Unsigned32 | read-only | current |
| f3PtpTSStatsTotalTimePR3 OBJECT-TYPE Total Time in seconds Phase Recovery Score is 3. | 1.3.6.1.4.1.2544.1.12.18.2.10.1.10 | Unsigned32 | read-only | current |
| f3PtpTSHistoryTable OBJECT-TYPE A collection of Telecom Slave related statistics. These reflect the historical data. | 1.3.6.1.4.1.2544.1.12.18.2.11 | not-accessible | current | |
| f3PtpTSHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpTSHistoryTable. Entries exist in this table for each Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.2.11.1 | not-accessible | current | |
| f3PtpTSHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Telecom Slave statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.1 | Integer32 (1..32) | not-accessible | current |
| f3PtpTSHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.2 | DateAndTime | read-only | current |
| f3PtpTSHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.3 | TruthValue | read-only | current |
| f3PtpTSHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.4 | CmPmBinAction | read-write | current |
| f3PtpTSHistoryTotalTimeCR5 OBJECT-TYPE Total Time in seconds Clock Recovery Score is 5. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.5 | Unsigned32 | read-only | current |
| f3PtpTSHistoryTotalTimeCR4 OBJECT-TYPE Total Time in seconds Clock Recovery Score is 4. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.6 | Unsigned32 | read-only | current |
| f3PtpTSHistoryTotalTimeCR3 OBJECT-TYPE Total Time in seconds Clock Recovery Score is 3. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.7 | Unsigned32 | read-only | current |
| f3PtpTSHistoryTotalTimePR5 OBJECT-TYPE Total Time in seconds Phase Recovery Score is 5. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.8 | Unsigned32 | read-only | current |
| f3PtpTSHistoryTotalTimePR4 OBJECT-TYPE Total Time in seconds Phase Recovery Score is 4. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.9 | Unsigned32 | read-only | current |
| f3PtpTSHistoryTotalTimePR3 OBJECT-TYPE Total Time in seconds Phase Recovery Score is 3. | 1.3.6.1.4.1.2544.1.12.18.2.11.1.10 | Unsigned32 | read-only | current |
| f3PtpTSThresholdTable OBJECT-TYPE A table of entries that allow manageability of Telecom Slave Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.12 | not-accessible | current | |
| f3PtpTSThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpTSThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.12.1 | not-accessible | current | |
| f3PtpTSThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpTSThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.12.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpTSThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.12.1.2 | CmPmIntervalType | read-only | current |
| f3PtpTSThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.12.1.3 | VariablePointer | read-only | current |
| f3PtpTSThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.12.1.4 | Unsigned32 | read-write | current |
| f3PtpTSThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.12.1.5 | Unsigned32 | read-write | current |
| f3PtpTSThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpTSThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.12.1.6 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsTable OBJECT-TYPE A collection of Master Clock Interface related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.13 | not-accessible | current | |
| f3PtpMCIStatsEntry OBJECT-TYPE A conceptual row in the f3PtpMCIStatsTable. Entries exist in this table for each Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.2.13.1 | not-accessible | current | |
| f3PtpMCIStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Master Clock Interface statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.13.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpMCIStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.2 | CmPmIntervalType | read-only | current |
| f3PtpMCIStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.3 | TruthValue | read-only | current |
| f3PtpMCIStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.4 | CmPmBinAction | read-write | current |
| f3PtpMCIStatsPtpDiscards OBJECT-TYPE Count of PTP messages that have been discarded by the MCI since either Source IP, PTP Domain number, Port Identity did not match any Remote Slave clock. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.5 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsSyncDeniedEvents OBJECT-TYPE Count of Sync service denied events. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.6 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsDelayRspDeniedEvents OBJECT-TYPE Count of Delay Response service denied events. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.7 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsAnnounceDeniedEvents OBJECT-TYPE Count of Announce service denied events. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.8 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsSyncCancelledEvents OBJECT-TYPE Count of Sync service canceled events initiated by the Remote Slave Clocks. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.9 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsDelayRspCancelledEvents OBJECT-TYPE Count of Delay Response service canceled events initiated by the Remote Slave Clocks. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.10 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsAnnounceCancelledEvents OBJECT-TYPE Count of Announce service canceled events initiated by the Remote Slave Clocks. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.11 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsDynamicSlavesLearnt OBJECT-TYPE Count of Successfully learned Dynamic Slaves. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.12 | PerfCounter64 | read-only | current |
| f3PtpMCIStatsDynamicSlavesDropped OBJECT-TYPE Count of Dynamic Slaves removed from the Remote Slaves table due to lease expired. | 1.3.6.1.4.1.2544.1.12.18.2.13.1.13 | PerfCounter64 | read-only | current |
| f3PtpMCIHistoryTable OBJECT-TYPE A collection of Master Clock Interface related history data. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.14 | not-accessible | current | |
| f3PtpMCIHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpMCIHistoryTable. Entries exist in this table for each Master Clock Interface. | 1.3.6.1.4.1.2544.1.12.18.2.14.1 | not-accessible | current | |
| f3PtpMCIHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Master Clock Interface PM history entry. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.1 | Integer32 (1..32) | not-accessible | current |
| f3PtpMCIHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.2 | DateAndTime | read-only | current |
| f3PtpMCIHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.3 | TruthValue | read-only | current |
| f3PtpMCIHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.4 | CmPmBinAction | read-write | current |
| f3PtpMCIHistoryPtpDiscards OBJECT-TYPE Count of PTP messages that have been discarded by the MCI since either Source IP, PTP Domain number, Port Identity did not match any Remote Slave clock. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.5 | PerfCounter64 | read-only | current |
| f3PtpMCIHistorySyncDeniedEvents OBJECT-TYPE Count of Sync service denied events. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.6 | PerfCounter64 | read-only | current |
| f3PtpMCIHistoryDelayRspDeniedEvents OBJECT-TYPE Count of Delay Response service denied events. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.7 | PerfCounter64 | read-only | current |
| f3PtpMCIHistoryAnnounceDeniedEvents OBJECT-TYPE Count of Announce service denied events. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.8 | PerfCounter64 | read-only | current |
| f3PtpMCIHistorySyncCancelledEvents OBJECT-TYPE Count of Sync service canceled events initiated by the Remote Slave Clocks. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.9 | PerfCounter64 | read-only | current |
| f3PtpMCIHistoryDelayRspCancelledEvents OBJECT-TYPE Count of Delay Response service canceled events initiated by the Remote Slave Clocks. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.10 | PerfCounter64 | read-only | current |
| f3PtpMCIHistoryAnnounceCancelledEvents OBJECT-TYPE Count of Announce service canceled events initiated by the Remote Slave Clocks. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.11 | PerfCounter64 | read-only | current |
| f3PtpMCIHistoryDynamicSlavesLearnt OBJECT-TYPE Count of Successfully learned Dynamic Slaves. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.12 | PerfCounter64 | read-only | current |
| f3PtpMCIHistoryDynamicSlavesDropped OBJECT-TYPE Count of Dynamic Slaves removed from the Remote Slaves table due to lease expired. | 1.3.6.1.4.1.2544.1.12.18.2.14.1.13 | PerfCounter64 | read-only | current |
| f3PtpMCIThresholdTable OBJECT-TYPE A table of entries that allow manageability of Master Clock Interface Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.15 | not-accessible | current | |
| f3PtpMCIThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpMCIThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.15.1 | not-accessible | current | |
| f3PtpMCIThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpMCIThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.15.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpMCIThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.15.1.2 | CmPmIntervalType | read-only | current |
| f3PtpMCIThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.15.1.3 | VariablePointer | read-only | current |
| f3PtpMCIThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.15.1.4 | Unsigned32 | read-write | current |
| f3PtpMCIThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.15.1.5 | Unsigned32 | read-write | current |
| f3PtpMCIThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpMCIThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.15.1.6 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsTable OBJECT-TYPE A collection of Remote Slave related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.16 | not-accessible | current | |
| f3PtpRemoteSlaveStatsEntry OBJECT-TYPE A conceptual row in the f3PtpRemoteSlaveStatsTable. Entries exist in this table for each Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.2.16.1 | not-accessible | current | |
| f3PtpRemoteSlaveStatsSlaveType OBJECT-TYPE This object indicates if this row referts to Static or Dynamic Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.1 | RemoteSlaveType | not-accessible | current |
| f3PtpRemoteSlaveStatsSlaveIndex OBJECT-TYPE Index of a Static or Dynamic Remote Slave. When f3PtpRemoteSlaveStatsSlaveType is 'static' then this object referts to f3PtpStaticRemoteSlaveIndex. When f3PtpRemoteSlaveStatsSlaveType is 'dynamic' then this object referts to f3PtpDynamicRemoteSlaveIndex. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.2 | Integer32 | not-accessible | current |
| f3PtpRemoteSlaveStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Remote Slave statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.16.1.3 | Integer32 (1..4) | not-accessible | current |
| f3PtpRemoteSlaveStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.4 | CmPmIntervalType | read-only | current |
| f3PtpRemoteSlaveStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.5 | TruthValue | read-only | current |
| f3PtpRemoteSlaveStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.6 | CmPmBinAction | read-write | current |
| f3PtpRemoteSlaveStatsSyncMsgsGen OBJECT-TYPE Total Sync messages generated. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.7 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsDelayRspMsgsGen OBJECT-TYPE Total Delay Response messages generated. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.8 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsAnnounceMsgsGen OBJECT-TYPE Total Announce messages generated. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.9 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsSignallingMsgsGen OBJECT-TYPE Total Signalling messages generated. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.10 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsDelayReqMsgsRx OBJECT-TYPE Total Delay Request messages received. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.11 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsSignallingMsgsRx OBJECT-TYPE Total Signalling messages received. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.12 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsDelayReqMsgsDropped OBJECT-TYPE Total Delay Request messages dropped. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.13 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsInvalidTLVLenDiscards OBJECT-TYPE Total number of PTP messages discarded due to invalid PTP TLV length. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.14 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsInvalidTLVTypeDiscards OBJECT-TYPE Total number of PTP messages discarded due to invalid PTP TLV type. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.15 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsTimesSyncLeaseExp OBJECT-TYPE Count of Sync service lease duration expired events. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.16 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsTimesDelayRspLeaseExp OBJECT-TYPE Count of Delay Response service lease duration expired events. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.17 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveStatsTimesAnnounceLeaseExp OBJECT-TYPE Count of Announce service lease duration expired events. | 1.3.6.1.4.1.2544.1.12.18.2.16.1.18 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryTable OBJECT-TYPE A collection of Remote Slave related history. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.17 | not-accessible | current | |
| f3PtpRemoteSlaveHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpRemoteSlaveHistoryTable. Entries exist in this table for each Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.2.17.1 | not-accessible | current | |
| f3PtpRemoteSlaveHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Remote Slave PM history entry. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.1 | Integer32 (1..32) | not-accessible | current |
| f3PtpRemoteSlaveHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.2 | DateAndTime | read-only | current |
| f3PtpRemoteSlaveHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.3 | TruthValue | read-only | current |
| f3PtpRemoteSlaveHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.4 | CmPmBinAction | read-write | current |
| f3PtpRemoteSlaveHistorySyncMsgsGen OBJECT-TYPE Total Sync messages generated. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.5 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryDelayRspMsgsGen OBJECT-TYPE Total Delay Response messages generated. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.6 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryAnnounceMsgsGen OBJECT-TYPE Total Announce messages generated. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.7 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistorySignallingMsgsGen OBJECT-TYPE Total Signalling messages generated. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.8 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryDelayReqMsgsRx OBJECT-TYPE Total Delay Request messages received. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.9 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistorySignallingMsgsRx OBJECT-TYPE Total Signalling messages received. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.10 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryDelayReqMsgsDropped OBJECT-TYPE Total Delay Request messages dropped. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.11 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryInvalidTLVLenDiscards OBJECT-TYPE Total number of PTP messages discarded due to invalid PTP TLV length. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.12 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryInvalidTLVTypeDiscards OBJECT-TYPE Total number of PTP messages discarded due to invalid PTP TLV type. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.13 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryTimesSyncLeaseExp OBJECT-TYPE Count of Sync service lease duration expired events. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.14 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryTimesDelayRspLeaseExp OBJECT-TYPE Count of Delay Response service lease duration expired events. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.15 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveHistoryTimesAnnounceLeaseExp OBJECT-TYPE Count of Announce service lease duration expired events. | 1.3.6.1.4.1.2544.1.12.18.2.17.1.16 | PerfCounter64 | read-only | current |
| f3PtpRemoteSlaveThresholdTable OBJECT-TYPE A table of entries that allow manageability of Master Clock Interface Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.18 | not-accessible | current | |
| f3PtpRemoteSlaveThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpRemoteSlaveThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.18.1 | not-accessible | current | |
| f3PtpRemoteSlaveThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpRemoteSlaveThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.18.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpRemoteSlaveThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.18.1.2 | CmPmIntervalType | read-only | current |
| f3PtpRemoteSlaveThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.18.1.3 | VariablePointer | read-only | current |
| f3PtpRemoteSlaveThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.18.1.4 | Unsigned32 | read-write | current |
| f3PtpRemoteSlaveThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.18.1.5 | Unsigned32 | read-write | current |
| f3PtpRemoteSlaveThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpRemoteSlaveThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.18.1.6 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsTable OBJECT-TYPE A collection of Traffic Port PTP Flow Point statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.19 | not-accessible | current | |
| f3PtpTrafficPortFlowPointStatsEntry OBJECT-TYPE A conceptual row in the f3PtpTrafficPortFlowPointStatsTable. Entries exist in this table for each Traffic Port Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1 | not-accessible | current | |
| f3PtpTrafficPortFlowPointStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Traffic Port PTP Flow Point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.19.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpTrafficPortFlowPointStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.2 | CmPmIntervalType | read-only | current |
| f3PtpTrafficPortFlowPointStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.3 | TruthValue | read-only | current |
| f3PtpTrafficPortFlowPointStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.4 | CmPmBinAction | read-write | current |
| f3PtpTrafficPortFlowPointStatsAnnouncesRx OBJECT-TYPE Number of PTP Announce messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.5 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsAnnouncesTx OBJECT-TYPE Number of Announce Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.6 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsSyncsRx OBJECT-TYPE Number of Sync Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.7 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsSyncsTx OBJECT-TYPE Number of Sync Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.8 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsFollowupsRx OBJECT-TYPE Number of Follow up Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.9 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsFollowupsTx OBJECT-TYPE Number of Follow up Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.10 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsDelayReqsRx OBJECT-TYPE Number of Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.11 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsDelayReqsTx OBJECT-TYPE Number of Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.12 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsDelayRspsRx OBJECT-TYPE Number of Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.13 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsDelayRspsTx OBJECT-TYPE Number of Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.14 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsPDelayReqsRx OBJECT-TYPE Number of Peer Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.15 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsPDelayReqsTx OBJECT-TYPE Number of Peer Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.16 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsPDelayRspsRx OBJECT-TYPE Number of Peer Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.17 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsPDelayRspsTx OBJECT-TYPE Number of Peer Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.18 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsPDelayRspFollowupsRx OBJECT-TYPE Number of Peer Delay Response Followup Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.19 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsPDelayRspFollowupsTx OBJECT-TYPE Number of Peer Delay Response Followup Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.20 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsSignalingRx OBJECT-TYPE Number of PTP Signaling Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.21 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsSignalingTx OBJECT-TYPE Number of PTP Signaling Messages Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.22 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMgmtFramesRx OBJECT-TYPE Number of PTP Management Frames received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.23 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMgmtFramesTx OBJECT-TYPE Number of PTP Management Frames Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.24 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsPtpUnknownsRx OBJECT-TYPE Number of Unknown PTP Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.25 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsPtpUnknownsTx OBJECT-TYPE Number of Unknown PTP Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.26 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMinSyncResTime OBJECT-TYPE The minimum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.27 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMaxSyncResTime OBJECT-TYPE The maximum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.28 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsAvgSyncResTime OBJECT-TYPE The average residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.29 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMinDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.30 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMaxDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.31 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsAvgDelayReqResTime OBJECT-TYPE The average residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.32 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMinPDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.33 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMaxPDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.34 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsAvgPDelayReqResTime OBJECT-TYPE The average residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.35 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMinPDelayRspResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.36 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsMaxPDelayRspResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.37 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsAvgPDelayRspResTime OBJECT-TYPE The average residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.38 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointStatsDestMciNoMatchDiscards OBJECT-TYPE The dest MCI no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.39 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointStatsTagNoMatchDiscards OBJECT-TYPE PTP frames discarded due to tag mismatch. For example, eth-multicast FP is tagged, then untagged non-forwardable PTP frames shall be discarded. | 1.3.6.1.4.1.2544.1.12.18.2.19.1.40 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryTable OBJECT-TYPE A collection of Traffic Port PTP Flow Point history statistics. These reflect the history data. | 1.3.6.1.4.1.2544.1.12.18.2.20 | not-accessible | current | |
| f3PtpTrafficPortFlowPointHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpTrafficPortFlowPointHistoryTable. Entries exist in this table for each Traffic Port Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1 | not-accessible | current | |
| f3PtpTrafficPortFlowPointHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this Ethernet Traffic Port PTP Flow point PM history entry. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.1 | Integer32 (1..32) | not-accessible | current |
| f3PtpTrafficPortFlowPointHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.2 | DateAndTime | read-only | current |
| f3PtpTrafficPortFlowPointHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.3 | TruthValue | read-only | current |
| f3PtpTrafficPortFlowPointHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.4 | CmPmBinAction | read-write | current |
| f3PtpTrafficPortFlowPointHistoryAnnouncesRx OBJECT-TYPE Number of PTP Announce messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.5 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryAnnouncesTx OBJECT-TYPE Number of Announce Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.6 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistorySyncsRx OBJECT-TYPE Number of Sync Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.7 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistorySyncsTx OBJECT-TYPE Number of Sync Messages transmitted on the PTP Flow Point. This object is applicable for transparent clocks. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.8 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryFollowupsRx OBJECT-TYPE Number of Follow up Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.9 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryFollowupsTx OBJECT-TYPE Number of Follow up Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.10 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryDelayReqsRx OBJECT-TYPE Number of Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.11 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryDelayReqsTx OBJECT-TYPE Number of Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.12 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryDelayRspsRx OBJECT-TYPE Number of Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.13 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryDelayRspsTx OBJECT-TYPE Number of Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.14 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryPDelayReqsRx OBJECT-TYPE Number of Peer Delay Request Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.15 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryPDelayReqsTx OBJECT-TYPE Number of Peer Delay Request Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.16 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryPDelayRspsRx OBJECT-TYPE Number of Peer Delay Response Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.17 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryPDelayRspsTx OBJECT-TYPE Number of Peer Delay Response Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.18 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryPDelayRspFollowupsRx OBJECT-TYPE Number of Peer Delay Response Followup Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.19 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryPDelayRspFollowupsTx OBJECT-TYPE Number of Peer Delay Response Followup Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.20 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistorySignalingRx OBJECT-TYPE Number of PTP Signaling Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.21 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistorySignalingTx OBJECT-TYPE Number of PTP Signaling Messages Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.22 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMgmtFramesRx OBJECT-TYPE Number of PTP Management Frames received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.23 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMgmtFramesTx OBJECT-TYPE Number of PTP Management Frames Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.24 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryPtpUnknownsRx OBJECT-TYPE Number of Unknown PTP Messages received on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.25 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryPtpUnknownsTx OBJECT-TYPE Number of Unknown PTP Messages transmitted on the PTP Flow Point. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.26 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMinSyncResTime OBJECT-TYPE The minimum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.27 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMaxSyncResTime OBJECT-TYPE The maximum residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.28 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryAvgSyncResTime OBJECT-TYPE The average residence time for PTP Sync messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.29 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMinDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.30 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMaxDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.31 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryAvgDelayReqResTime OBJECT-TYPE The average residence time for PTP Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.32 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMinPDelayReqResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.33 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMaxPDelayReqResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.34 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryAvgPDelayReqResTime OBJECT-TYPE The average residence time for PTP Peer Delay Request messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.35 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMinPDelayRspResTime OBJECT-TYPE The minimum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.36 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryMaxPDelayRspResTime OBJECT-TYPE The maximum residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.37 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryAvgPDelayRspResTime OBJECT-TYPE The average residence time for PTP Peer Delay Response messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.38 | Unsigned32 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryDestMciNoMatchDiscards OBJECT-TYPE The dest MCI no match discards messages. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.39 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointHistoryTagNoMatchDiscards OBJECT-TYPE PTP frames discarded due to tag mismatch. For example, eth-multicast FP is tagged, then untagged non-forwardable PTP frames shall be discarded. | 1.3.6.1.4.1.2544.1.12.18.2.20.1.40 | PerfCounter64 | read-only | current |
| f3PtpTrafficPortFlowPointThresholdTable OBJECT-TYPE A table of entries that allow manageability of Traffic Port PTP Flow Point Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.21 | not-accessible | current | |
| f3PtpTrafficPortFlowPointThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpTrafficPortFlowPointThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.21.1 | not-accessible | current | |
| f3PtpTrafficPortFlowPointThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpTrafficPortFlowPointThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.21.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpTrafficPortFlowPointThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.21.1.2 | CmPmIntervalType | read-only | current |
| f3PtpTrafficPortFlowPointThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.21.1.3 | VariablePointer | read-only | current |
| f3PtpTrafficPortFlowPointThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.21.1.4 | Unsigned32 | read-write | current |
| f3PtpTrafficPortFlowPointThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.21.1.5 | Unsigned32 | read-write | current |
| f3PtpTrafficPortFlowPointThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpTrafficPortFlowPointThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.21.1.6 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsTable OBJECT-TYPE A collection of PTP Port related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.22 | not-accessible | current | |
| f3PtpPTPPortStatsEntry OBJECT-TYPE A conceptual row in the f3PtpPTPPortStatsTable. Entries exist in this table for each PTP Port. | 1.3.6.1.4.1.2544.1.12.18.2.22.1 | not-accessible | current | |
| f3PtpPTPPortStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this PTP Port statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.22.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpPTPPortStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.2 | CmPmIntervalType | read-only | current |
| f3PtpPTPPortStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.3 | TruthValue | read-only | current |
| f3PtpPTPPortStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.4 | CmPmBinAction | read-write | current |
| f3PtpPTPPortStatsAvgAnnounceRate OBJECT-TYPE Avg Announce Rate. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.5 | Unsigned32 | read-only | current |
| f3PtpPTPPortStatsAvgSyncRate OBJECT-TYPE Avg Sync Rate. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.6 | Unsigned32 | read-only | current |
| f3PtpPTPPortStatsAvgDelayReqRate OBJECT-TYPE Avg Delay Req Rate. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.7 | Unsigned32 | read-only | current |
| f3PtpPTPPortStatsAvgDelayRespRate OBJECT-TYPE Avg Delay Resp Rate. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.8 | Unsigned32 | read-only | current |
| f3PtpPTPPortStatsMismatchDomainDiscards OBJECT-TYPE Mismatch Domain Discards. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.9 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsMessageWrongTypeDiscards OBJECT-TYPE Message Wrong Type Discards. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.10 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsMessagesWrongLengthDiscards OBJECT-TYPE Messages Wrong Length Discards. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.11 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsUnknownMasterDiscards OBJECT-TYPE Unknown Master Discards. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.12 | PerfCounter64 | read-only | deprecated |
| f3PtpPTPPortStatsMinOffsetFromMaster OBJECT-TYPE Min Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.13 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsMaxOffsetFromMaster OBJECT-TYPE Max Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.14 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsAvgOffsetFromMaster OBJECT-TYPE Avg Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.15 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsMinSyncPathDelay OBJECT-TYPE Min Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.16 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsMaxSyncPathDelay OBJECT-TYPE Max Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.17 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsAvgSyncPathDelay OBJECT-TYPE Avg Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.18 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsMinMeanPathDelay OBJECT-TYPE Min Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.19 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsMaxMeanPathDelay OBJECT-TYPE Max Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.20 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsAvgMeanPathDelay OBJECT-TYPE Avg Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.21 | PerfCounter64 | read-only | current |
| f3PtpPTPPortStatsMsgMiscDiscards OBJECT-TYPE Number of received packets discarded due to miscellaneous reasons. | 1.3.6.1.4.1.2544.1.12.18.2.22.1.22 | PerfCounter64 | read-only | deprecated |
| f3PtpPTPPortHistoryTable OBJECT-TYPE A collection of PTP Port related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.23 | not-accessible | current | |
| f3PtpPTPPortHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpPTPPortHistoryTable. Entries exist in this table for each PTP Port. | 1.3.6.1.4.1.2544.1.12.18.2.23.1 | not-accessible | current | |
| f3PtpPTPPortHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this PTP Port statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.23.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpPTPPortHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.2 | DateAndTime | read-only | current |
| f3PtpPTPPortHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.3 | TruthValue | read-only | current |
| f3PtpPTPPortHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.4 | CmPmBinAction | read-write | current |
| f3PtpPTPPortHistoryAvgAnnounceRate OBJECT-TYPE Avg Announce Rate. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.5 | Unsigned32 | read-only | current |
| f3PtpPTPPortHistoryAvgSyncRate OBJECT-TYPE Avg Sync Rate. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.6 | Unsigned32 | read-only | current |
| f3PtpPTPPortHistoryAvgDelayReqRate OBJECT-TYPE Avg Delay Req Rate. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.7 | Unsigned32 | read-only | current |
| f3PtpPTPPortHistoryAvgDelayRespRate OBJECT-TYPE Avg Delay Resp Rate. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.8 | Unsigned32 | read-only | current |
| f3PtpPTPPortHistoryMismatchDomainDiscards OBJECT-TYPE Mismatch Domain Discards. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.9 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryMessageWrongTypeDiscards OBJECT-TYPE Message Wrong Type Discards. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.10 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryMessagesWrongLengthDiscards OBJECT-TYPE Messages Wrong Length Discards. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.11 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryUnknownMasterDiscards OBJECT-TYPE Unknown Master Discards. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.12 | PerfCounter64 | read-only | deprecated |
| f3PtpPTPPortHistoryMinOffsetFromMaster OBJECT-TYPE Min Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.13 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryMaxOffsetFromMaster OBJECT-TYPE Max Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.14 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryAvgOffsetFromMaster OBJECT-TYPE Avg Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.15 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryMinSyncPathDelay OBJECT-TYPE Min Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.16 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryMaxSyncPathDelay OBJECT-TYPE Max Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.17 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryAvgSyncPathDelay OBJECT-TYPE Avg Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.18 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryMinMeanPathDelay OBJECT-TYPE Min Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.19 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryMaxMeanPathDelay OBJECT-TYPE Max Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.20 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryAvgMeanPathDelay OBJECT-TYPE Avg Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.21 | PerfCounter64 | read-only | current |
| f3PtpPTPPortHistoryMsgMiscDiscards OBJECT-TYPE Number of received packets discarded due to miscellaneous reasons. | 1.3.6.1.4.1.2544.1.12.18.2.23.1.22 | PerfCounter64 | read-only | deprecated |
| f3PtpPTPPortThresholdTable OBJECT-TYPE A table of entries that allow manageability of PTP Port Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.24 | not-accessible | current | |
| f3PtpPTPPortThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpPTPPortThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.24.1 | not-accessible | current | |
| f3PtpPTPPortThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpPTPPortThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.24.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpPTPPortThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.24.1.2 | CmPmIntervalType | read-only | current |
| f3PtpPTPPortThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.24.1.3 | VariablePointer | read-only | current |
| f3PtpPTPPortThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.24.1.4 | Unsigned32 | read-write | current |
| f3PtpPTPPortThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.24.1.5 | Unsigned32 | read-write | current |
| f3PtpPTPPortThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpPTPPortThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.24.1.6 | PerfCounter64 | read-only | current |
| f3PtpPTPClockStatsTable OBJECT-TYPE A collection of PTP Clock related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.25 | not-accessible | current | |
| f3PtpPTPClockStatsEntry OBJECT-TYPE A conceptual row in the f3PtpPTPClockStatsTable. Entries exist in this table for each PTP Port. | 1.3.6.1.4.1.2544.1.12.18.2.25.1 | not-accessible | current | |
| f3PtpPTPClockStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this PTP Port statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.25.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpPTPClockStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.2 | CmPmIntervalType | read-only | current |
| f3PtpPTPClockStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.3 | TruthValue | read-only | current |
| f3PtpPTPClockStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.4 | CmPmBinAction | read-write | current |
| f3PtpPTPClockStatsMinOffsetFromMaster OBJECT-TYPE Min Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.5 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockStatsMaxOffsetFromMaster OBJECT-TYPE Max Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.6 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockStatsAvgOffsetFromMaster OBJECT-TYPE Avg Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.7 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockStatsMinSyncPathDelay OBJECT-TYPE Min Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.8 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockStatsMaxSyncPathDelay OBJECT-TYPE Max Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.9 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockStatsAvgSyncPathDelay OBJECT-TYPE Avg Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.10 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockStatsMinMeanPathDelay OBJECT-TYPE Min Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.11 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockStatsMaxMeanPathDelay OBJECT-TYPE Max Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.12 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockStatsAvgMeanPathDelay OBJECT-TYPE Avg Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.25.1.13 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryTable OBJECT-TYPE A collection of PTP Clock related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.26 | not-accessible | current | |
| f3PtpPTPClockHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpPTPClockHistoryTable. Entries exist in this table for each PTP Port. | 1.3.6.1.4.1.2544.1.12.18.2.26.1 | not-accessible | current | |
| f3PtpPTPClockHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this PTP Port statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.26.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpPTPClockHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.2 | DateAndTime | read-only | current |
| f3PtpPTPClockHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.3 | TruthValue | read-only | current |
| f3PtpPTPClockHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.4 | CmPmBinAction | read-write | current |
| f3PtpPTPClockHistoryMinOffsetFromMaster OBJECT-TYPE Min Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.5 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryMaxOffsetFromMaster OBJECT-TYPE Max Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.6 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryAvgOffsetFromMaster OBJECT-TYPE Avg Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.7 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryMinSyncPathDelay OBJECT-TYPE Min Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.8 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryMaxSyncPathDelay OBJECT-TYPE Max Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.9 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryAvgSyncPathDelay OBJECT-TYPE Avg Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.10 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryMinMeanPathDelay OBJECT-TYPE Min Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.11 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryMaxMeanPathDelay OBJECT-TYPE Max Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.12 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockHistoryAvgMeanPathDelay OBJECT-TYPE Avg Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.26.1.13 | ScaledNanoseconds | read-only | current |
| f3PtpPTPClockThresholdTable OBJECT-TYPE A table of entries that allow manageability of PTP Clock Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.27 | not-accessible | current | |
| f3PtpPTPClockThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpPTPClockThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.27.1 | not-accessible | current | |
| f3PtpPTPClockThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpPTPClockThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.27.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpPTPClockThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.27.1.2 | CmPmIntervalType | read-only | current |
| f3PtpPTPClockThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.27.1.3 | VariablePointer | read-only | current |
| f3PtpPTPClockThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.27.1.4 | Unsigned32 | read-write | current |
| f3PtpPTPClockThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.27.1.5 | Unsigned32 | read-write | current |
| f3PtpPTPClockThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpPTPClockThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.27.1.6 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsTable OBJECT-TYPE A collection of PTP Port related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.28 | not-accessible | current | |
| f3PtpL3PTPPortStatsEntry OBJECT-TYPE A conceptual row in the f3PtpL3PTPPortStatsTable. Entries exist in this table for each L3 PTP Port. | 1.3.6.1.4.1.2544.1.12.18.2.28.1 | not-accessible | current | |
| f3PtpL3PTPPortStatsIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this PTP Port statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.28.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpL3PTPPortStatsIntervalType OBJECT-TYPE Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.2 | CmPmIntervalType | read-only | current |
| f3PtpL3PTPPortStatsValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.3 | TruthValue | read-only | current |
| f3PtpL3PTPPortStatsAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.4 | CmPmBinAction | read-write | current |
| f3PtpL3PTPPortStatsAvgAnnounceRate OBJECT-TYPE Avg Announce Rate. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.5 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortStatsAvgSyncRate OBJECT-TYPE Avg Sync Rate. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.6 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortStatsAvgDelayReqRate OBJECT-TYPE Avg Delay Req Rate. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.7 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortStatsAvgDelayRespRate OBJECT-TYPE Avg Delay Resp Rate. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.8 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortStatsMismatchDomainDiscards OBJECT-TYPE Mismatch Domain Discards. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.9 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsMessageWrongTypeDiscards OBJECT-TYPE Message Wrong Type Discards. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.10 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsMessagesWrongLengthDiscards OBJECT-TYPE Messages Wrong Length Discards. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.11 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsUnknownMasterDiscards OBJECT-TYPE Unknown Master Discards. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.12 | PerfCounter64 | read-only | deprecated |
| f3PtpL3PTPPortStatsMinOffsetFromMaster OBJECT-TYPE Min Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.13 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsMaxOffsetFromMaster OBJECT-TYPE Max Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.14 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsAvgOffsetFromMaster OBJECT-TYPE Avg Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.15 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsMinSyncPathDelay OBJECT-TYPE Min Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.16 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsMaxSyncPathDelay OBJECT-TYPE Max Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.17 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsAvgSyncPathDelay OBJECT-TYPE Avg Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.18 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsMinMeanPathDelay OBJECT-TYPE Min Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.19 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsMaxMeanPathDelay OBJECT-TYPE Max Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.20 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsAvgMeanPathDelay OBJECT-TYPE Avg Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.21 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortStatsMsgMiscDiscards OBJECT-TYPE Number of received packets discarded due to miscellaneous reasons. | 1.3.6.1.4.1.2544.1.12.18.2.28.1.22 | PerfCounter64 | read-only | deprecated |
| f3PtpL3PTPPortHistoryTable OBJECT-TYPE A collection of PTP Port related statistics. These reflect the current data. | 1.3.6.1.4.1.2544.1.12.18.2.29 | not-accessible | current | |
| f3PtpL3PTPPortHistoryEntry OBJECT-TYPE A conceptual row in the f3PtpL3PTPPortHistoryTable. Entries exist in this table for each PTP Port. | 1.3.6.1.4.1.2544.1.12.18.2.29.1 | not-accessible | current | |
| f3PtpL3PTPPortHistoryIndex OBJECT-TYPE An arbitrary integer index value used to uniquely identify this PTP Port statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min | 1.3.6.1.4.1.2544.1.12.18.2.29.1.1 | Integer32 (1..4) | not-accessible | current |
| f3PtpL3PTPPortHistoryTime OBJECT-TYPE Indicates the time of history bin creation. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.2 | DateAndTime | read-only | current |
| f3PtpL3PTPPortHistoryValid OBJECT-TYPE Indicates the validity of the bin. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.3 | TruthValue | read-only | current |
| f3PtpL3PTPPortHistoryAction OBJECT-TYPE Allows the Manager to clear the bin. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.4 | CmPmBinAction | read-write | current |
| f3PtpL3PTPPortHistoryAvgAnnounceRate OBJECT-TYPE Avg Announce Rate. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.5 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortHistoryAvgSyncRate OBJECT-TYPE Avg Sync Rate. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.6 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortHistoryAvgDelayReqRate OBJECT-TYPE Avg Delay Req Rate. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.7 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortHistoryAvgDelayRespRate OBJECT-TYPE Avg Delay Resp Rate. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.8 | Unsigned32 | read-only | current |
| f3PtpL3PTPPortHistoryMismatchDomainDiscards OBJECT-TYPE Mismatch Domain Discards. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.9 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryMessageWrongTypeDiscards OBJECT-TYPE Message Wrong Type Discards. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.10 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryMessagesWrongLengthDiscards OBJECT-TYPE Messages Wrong Length Discards. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.11 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryUnknownMasterDiscards OBJECT-TYPE Unknown Master Discards. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.12 | PerfCounter64 | read-only | deprecated |
| f3PtpL3PTPPortHistoryMinOffsetFromMaster OBJECT-TYPE Min Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.13 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryMaxOffsetFromMaster OBJECT-TYPE Max Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.14 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryAvgOffsetFromMaster OBJECT-TYPE Avg Offset From Master. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.15 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryMinSyncPathDelay OBJECT-TYPE Min Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.16 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryMaxSyncPathDelay OBJECT-TYPE Max Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.17 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryAvgSyncPathDelay OBJECT-TYPE Avg Sync Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.18 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryMinMeanPathDelay OBJECT-TYPE Min Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.19 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryMaxMeanPathDelay OBJECT-TYPE Max Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.20 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryAvgMeanPathDelay OBJECT-TYPE Avg Mean Path Delay. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.21 | PerfCounter64 | read-only | current |
| f3PtpL3PTPPortHistoryMsgMiscDiscards OBJECT-TYPE Number of received packets discarded due to miscellaneous reasons. | 1.3.6.1.4.1.2544.1.12.18.2.29.1.22 | PerfCounter64 | read-only | deprecated |
| f3PtpL3PTPPortThresholdTable OBJECT-TYPE A table of entries that allow manageability of PTP Port Thresholds. | 1.3.6.1.4.1.2544.1.12.18.2.30 | not-accessible | current | |
| f3PtpL3PTPPortThresholdEntry OBJECT-TYPE A conceptual row in the f3PtpL3PTPPortThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.30.1 | not-accessible | current | |
| f3PtpL3PTPPortThresholdIndex OBJECT-TYPE An index that uniquely identifies an entry in the f3PtpL3PTPPortThresholdTable. | 1.3.6.1.4.1.2544.1.12.18.2.30.1.1 | Integer32 (1..65535) | not-accessible | current |
| f3PtpL3PTPPortThresholdInterval OBJECT-TYPE The interval over which monitored value is sampled and compared with the specified threshold. | 1.3.6.1.4.1.2544.1.12.18.2.30.1.2 | CmPmIntervalType | read-only | current |
| f3PtpL3PTPPortThresholdVariable OBJECT-TYPE The object identifier of the particular variable to be sampled. | 1.3.6.1.4.1.2544.1.12.18.2.30.1.3 | VariablePointer | read-only | current |
| f3PtpL3PTPPortThresholdValueLo OBJECT-TYPE Lower 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.30.1.4 | Unsigned32 | read-write | current |
| f3PtpL3PTPPortThresholdValueHi OBJECT-TYPE Higher 32 bits of the threshold value. | 1.3.6.1.4.1.2544.1.12.18.2.30.1.5 | Unsigned32 | read-write | current |
| f3PtpL3PTPPortThresholdMonValue OBJECT-TYPE Monitored value corresponding to f3PtpL3PTPPortThresholdVariable. | 1.3.6.1.4.1.2544.1.12.18.2.30.1.6 | PerfCounter64 | read-only | current |
| f3PtpPerformanceNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.18.3 | |||
| f3PtpConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.18.4 | |||
| f3PtpCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.18.4.1 | |||
| f3PtpGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.18.4.2 | |||
| f3PtpStatusChangeNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.18.5 |
Notifications
| Name | OID | Status |
|---|---|---|
| f3PtpAccPortFlowPointThresholdCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP Access Port Flow Point is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.1 | current |
| f3PtpNetPortFlowPointThresholdCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP Network Port Flow Point is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.2 | current |
| f3PtpSOOCCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP Slave Only Ordinary Clock is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.3 | current |
| f3PtpTSCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP Telecom Slave is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.4 | current |
| f3PtpMCICrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP Master Clock Interface is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.5 | current |
| f3PtpRemoteSlaveCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP Remote Slave is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.6 | current |
| f3PtpTrafficPortFlowPointThresholdCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP Traffic Port Flow Point is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.7 | current |
| f3PtpPTPPortCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP PTPPort is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.8 | current |
| f3PtpPTPClockCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an PTP PTPClock is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.9 | current |
| f3PtpL3PTPPortCrossingAlert NOTIFICATION-TYPE This trap is sent each time a threshold on a PM condition on an L3 PTP Port is crossed. | 1.3.6.1.4.1.2544.1.12.18.3.10 | current |
| f3PtpTSStatusChangeTrap NOTIFICATION-TYPE This trap is sent there is a status change on the Telecom Slave. | 1.3.6.1.4.1.2544.1.12.18.5.1 | current |
| f3PtpMasterClockStatusChangeTrap NOTIFICATION-TYPE This trap is sent there is a status change on the Master Clock. | 1.3.6.1.4.1.2544.1.12.18.5.2 | current |
| f3PtpBCStatusChangeTrap NOTIFICATION-TYPE This trap is sent there is a status change on the Boundary Clock. | 1.3.6.1.4.1.2544.1.12.18.5.3 | current |
| f3PtpDynamicRemoteSlaveStatusChangeTrap NOTIFICATION-TYPE This trap is sent there is a status change on the Dynamic Remote Slave. | 1.3.6.1.4.1.2544.1.12.18.5.4 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| f3PtpCompliance MODULE-COMPLIANCE Describes the requirements for conformance to the F3 PTP group. | 1.3.6.1.4.1.2544.1.12.18.4.1.1 | current |
| f3PtpObjectGroup OBJECT-GROUP A collection of objects used to manage the F3 PTP Configuration data. | 1.3.6.1.4.1.2544.1.12.18.4.2.1 | current |
| f3PtpPerfObjectGroup OBJECT-GROUP A collection of objects used to manage the F3 PTP Performance data. | 1.3.6.1.4.1.2544.1.12.18.4.2.2 | current |
| f3PtpPerfNotifGroup NOTIFICATION-GROUP A collection of notifications related to F3 PTP Threshold Crossing Alerts. | 1.3.6.1.4.1.2544.1.12.18.4.2.3 | current |
| f3PtpStatusChangeNotifGroup NOTIFICATION-GROUP A collection of notifications related to F3 PTP Status Changes . | 1.3.6.1.4.1.2544.1.12.18.4.2.4 | current |
| f3PtpBoundaryClockObjectGroup OBJECT-GROUP A collection of objects related to F3 PTP Boundary Clock feature. | 1.3.6.1.4.1.2544.1.12.18.4.2.5 | current |
| f3PtpBoundaryClockNotifGroup NOTIFICATION-GROUP A collection of notifications related to F3 PTP Boundary Clock feature. | 1.3.6.1.4.1.2544.1.12.18.4.2.6 | current |
| f3PtpProtObjectGroup OBJECT-GROUP A collection of objects used to manage the Protection Object group. | 1.3.6.1.4.1.2544.1.12.18.4.2.7 | current |