CM-PROTECTION-MIB
- Registered at
- 1.3.6.1.4.1.2544.1.12.7
- Last updated
- 2010-06-23 00:00
- Organization
- ADVA Optical Networking
- Revisions
- 2010-06-23 00:00
- Namespace
- adva
- Source file
CM-PROTECTION-MIB- Digest
sha256:f94374634f704092dc197c9028cea28da49bdc5b60a1ae18e995665df3258d41
Description
This module defines the Protection MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Contact
Raghav Trivedi ADVA Optical Networking, Inc. Tel: +1 972 759-1239 E-mail: rtrivedi@advaoptical.com Postal: 2301 N. Greenville Ave. #300 Richardson, TX USA 75082
Imports
| From | Symbols |
|---|---|
| ADVA-MIB | fsp150cm |
| CM-ENTITY-MIB | neIndex, shelfIndex, slotIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ADVA-MIB CM-COMMON-MIB CM-ENTITY-MIB CM-PROTECTION-MIB CM-SYSTEM-MIB ENTITY-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB IPV6-TC LLDP-V2-MIB LLDP-V2-TC-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMP-TARGET-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CmProtGroupStatus TEXTUAL-CONVENTION Enumerations for Protection Status. nooutstandingreq - No oustanding request, sf-protect - Signal failure on protect, sf-working - Signal failure on working, sd-protect - Signal degrade on protect, sd-working - Signal degrade on working, manual-protect - Manual on protect manual-working - Manual on working forced-working - Forced on working forced-protect - Forced on protect lockout-protect - Lockout on protect waitToRestore - Wait to restore | current | |||
| CmProtSwitchAction TEXTUAL-CONVENTION Enumerations for User initiated Protection Switch Action. manualfromworking - Manual Switch from Working, forcedfromworking - Forced Switch from Working, manualfromprotect - Manual Switch from Protect, forcedfromprotect - Forced Switch from Protect, lockoutfromprotect - Lockout from Protect | current | |||
| CmProtSwitchDirection TEXTUAL-CONVENTION Enumerations for Protection Switch Direction. unidirectional - Unidirectional Protection Switching, bidirectional - Bidirectional Protection Switching. | current | |||
| CmProtSwitchMode TEXTUAL-CONVENTION Enumerations for Protection Switch Mode. oneplusone - 1+1, this is the NPCUP mode, dualactiverx - In this mode, traffic is bridged in A2N direction (same as 1+1), however both network ports receive customer traffic in N2A direction. In this mode, both network ports are working, i.e. there is no protection. universalring - In this mode, traffic is bridged in A2N direction (same as 1+1), both network ports receive customer traffic in N2A direction. In this mode, both network ports are working, i.e. no protection. The main difference w.r.t dualactiverx is that traffic in N2A direction, which does not match the service definition is steered to the other network port, i.e. non-service matching traffic from N1 goes to N2 and vice versa. | current | |||
| CmProtUnitState TEXTUAL-CONVENTION Enumerations for Protection Unit State. active - Active Protection Unit, standby - Standby Protection Unit. | current | |||
| CmProtUnitType TEXTUAL-CONVENTION Enumerations for Protection Unit Type. working - Working Protection Unit, protect - Protect Protection Unit. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cmProtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.7.1 | |||
| cmFacProtGroupTable OBJECT-TYPE A list of entries corresponding to the Facility Protection Groups. Entries can be created/deleted in this table by management application action. | 1.3.6.1.4.1.2544.1.12.7.1.1 | not-accessible | current | |
| cmFacProtGroupEntry OBJECT-TYPE An entry containing information applicable to a particular Protection Group. | 1.3.6.1.4.1.2544.1.12.7.1.1.1 | not-accessible | current | |
| cmFacProtGroupIndex OBJECT-TYPE Unique index value associated with the Facility Protection Group. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.1 | Integer32 | read-only | current |
| cmFacProtGroupUserLabel OBJECT-TYPE User Label associated with the Facility Protection Group. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.2 | DisplayString (SIZE(0..64)) | read-create | current |
| cmFacProtGroupSwitchMode OBJECT-TYPE Facility Protection Group's Protection Switch Mode. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.3 | CmProtSwitchMode | read-create | current |
| cmFacProtGroupRevertive OBJECT-TYPE Whether the Facility Protection is revertive or not. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.4 | TruthValue | read-create | current |
| cmFacProtGroupWaitToRestore OBJECT-TYPE Time in minutes to wait before reverting to Working facility in case of cmFacProtGroupRevertive set to revertive. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.5 | Integer32 (1..60 | 0) | read-create | current |
| cmFacProtGroupDirection OBJECT-TYPE Supported Protection Group Switch direction. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.6 | CmProtSwitchDirection | read-create | current |
| cmFacProtGroupWorkPort OBJECT-TYPE Facility Protection Group exists between 2 facilities (ports). This object represents the WORKING facility Port. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.7 | VariablePointer | read-create | current |
| cmFacProtGroupProtPort OBJECT-TYPE This object represents the PROTECT facility Network Element Port when cmFacProtGroupSwitchMode is oneplusone. In the case of dualactiverx, this represents the second active port. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.8 | VariablePointer | read-create | current |
| cmFacProtGroupStatus OBJECT-TYPE This object represents the PROTECTION group status. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.9 | CmProtGroupStatus | read-only | current |
| cmFacProtGroupAction OBJECT-TYPE User initiated protection switch action. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.10 | CmProtSwitchAction | read-write | current |
| cmFacProtGroupStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.11 | StorageType | read-create | current |
| cmFacProtGroupRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFacProtGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFacProtGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFacProtGroupRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.7.1.1.1.12 | RowStatus | read-create | current |
| cmFacProtGroupMacAddress OBJECT-TYPE This object allows retrieval of the Mac Address of the PROTECTION group. | 1.3.6.1.4.1.2544.1.12.7.1.1.1.13 | MacAddress | read-only | current |
| cmFacProtUnitTable OBJECT-TYPE A list of entries corresponding to the Facility Protection Units. | 1.3.6.1.4.1.2544.1.12.7.1.2 | not-accessible | current | |
| cmFacProtUnitEntry OBJECT-TYPE An entry containing information applicable to a particular Protection Unit. | 1.3.6.1.4.1.2544.1.12.7.1.2.1 | not-accessible | current | |
| cmFacProtUnitIndex OBJECT-TYPE Unique index value associated with the Facility Protection Unit. | 1.3.6.1.4.1.2544.1.12.7.1.2.1.1 | Integer32 | read-only | current |
| cmFacProtUnitType OBJECT-TYPE Facility Protection Unit's Type, i.e. whether working or protect. | 1.3.6.1.4.1.2544.1.12.7.1.2.1.2 | CmProtUnitType | read-only | current |
| cmFacProtUnitState OBJECT-TYPE Facility Protection Unit's State, i.e. whether active or standby. | 1.3.6.1.4.1.2544.1.12.7.1.2.1.3 | CmProtUnitState | read-only | current |
| cmFacProtUnitPort OBJECT-TYPE Facility Protection Unit's points to a facility (port). This object represents the facility Network Element port. | 1.3.6.1.4.1.2544.1.12.7.1.2.1.4 | VariablePointer | read-only | current |
| cmMSPGroupTable OBJECT-TYPE A list of entries corresponding to the Multiplex Section Protection Groups. Entries can be created/deleted in this table by management application action. | 1.3.6.1.4.1.2544.1.12.7.1.3 | not-accessible | current | |
| cmMSPGroupEntry OBJECT-TYPE An entry containing information applicable to a particular Protection Group. | 1.3.6.1.4.1.2544.1.12.7.1.3.1 | not-accessible | current | |
| cmMSPGroupIndex OBJECT-TYPE Unique index value associated with the Multiplex Section Protection Group. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.1 | Integer32 | read-only | current |
| cmMSPGroupUserLabel OBJECT-TYPE User Label associated with the Multiplex Section Protection Group. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.2 | DisplayString (SIZE(0..64)) | read-create | current |
| cmMSPGroupSwitchMode OBJECT-TYPE Multiplex Section Protection Group's Protection Switch Mode. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.3 | CmProtSwitchMode | read-create | current |
| cmMSPGroupRevertive OBJECT-TYPE Whether the Multiplex Section Protection is revertive or not. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.4 | TruthValue | read-create | current |
| cmMSPGroupWaitToRestore OBJECT-TYPE Time in minutes to wait before reverting to Working facility in case of cmMSPGroupRevertive set to revertive. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.5 | Integer32 (1..60 | 0) | read-create | current |
| cmMSPGroupB2DEGTrigger OBJECT-TYPE B2DEG is trigger of MSP or not. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.6 | TruthValue | read-create | current |
| cmMSPGroupDirection OBJECT-TYPE Supported Protection Group Switch direction. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.7 | CmProtSwitchDirection | read-create | current |
| cmMSPGroupWorkPort OBJECT-TYPE Multiplex Section Protection Group exists between 2 facilities (ports). This object represents the WORKING facility Port. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.8 | VariablePointer | read-create | current |
| cmMSPGroupProtPort OBJECT-TYPE This object represents the PROTECT facility Network Element Port when cmMSPGroupSwitchMode is oneplusone. In the case of dualactiverx, this represents the second active port. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.9 | VariablePointer | read-create | current |
| cmMSPGroupStatus OBJECT-TYPE This object represents the PROTECTION group status. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.10 | CmProtGroupStatus | read-only | current |
| cmMSPGroupAction OBJECT-TYPE User initiated protection switch action. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.11 | CmProtSwitchAction | read-write | current |
| cmMSPGroupStorageType OBJECT-TYPE The type of storage configured for this entry. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.12 | StorageType | read-create | current |
| cmMSPGroupRowStatus OBJECT-TYPE The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMSPGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmMSPGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMSPGroupRowStatus object may be modified if the associated instance of this object is equal to active(1). | 1.3.6.1.4.1.2544.1.12.7.1.3.1.13 | RowStatus | read-create | current |
| cmMSPGroupMacAddress OBJECT-TYPE This object allows retrieval of the Mac Address of the PROTECTION group. | 1.3.6.1.4.1.2544.1.12.7.1.3.1.14 | MacAddress | read-only | current |
| cmMSPUnitTable OBJECT-TYPE A list of entries corresponding to the Multiplex Section Protection Units. | 1.3.6.1.4.1.2544.1.12.7.1.4 | not-accessible | current | |
| cmMSPUnitEntry OBJECT-TYPE An entry containing information applicable to a particular Protection Unit. | 1.3.6.1.4.1.2544.1.12.7.1.4.1 | not-accessible | current | |
| cmMSPUnitIndex OBJECT-TYPE Unique index value associated with the Multiplex Section Protection Unit. | 1.3.6.1.4.1.2544.1.12.7.1.4.1.1 | Integer32 | read-only | current |
| cmMSPUnitType OBJECT-TYPE Multiplex Section Protection Unit's Type, i.e. whether working or protect. | 1.3.6.1.4.1.2544.1.12.7.1.4.1.2 | CmProtUnitType | read-only | current |
| cmMSPUnitState OBJECT-TYPE Multiplex Section Protection Unit's State, i.e. whether active or standby. | 1.3.6.1.4.1.2544.1.12.7.1.4.1.3 | CmProtUnitState | read-only | current |
| cmMSPUnitPort OBJECT-TYPE Facility Protection Unit's points to a facility (port). This object represents the facility Network Element port. | 1.3.6.1.4.1.2544.1.12.7.1.4.1.4 | VariablePointer | read-only | current |
| cmProtNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.7.2 | |||
| cmProtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.7.3 | |||
| cmProtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.7.3.1 | |||
| cmProtGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.12.7.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cmProtCompliance MODULE-COMPLIANCE Describes the requirements for conformance to the CM Prot group. | 1.3.6.1.4.1.2544.1.12.7.3.1.1 | current |
| cmProtObjectGroup OBJECT-GROUP A collection of objects used to manage the Protection Object group. | 1.3.6.1.4.1.2544.1.12.7.3.2.1 | current |
| cmMSProtObjectGroup OBJECT-GROUP A collection of objects used to manage the Multiplex Section Protection Object group. | 1.3.6.1.4.1.2544.1.12.7.3.2.2 | current |