ADVA-FSPR7-DEF-MIB
- Registered at
- 1.3.6.1.4.1.2544.1.11.10
- Last updated
- 2018-12-14 00:00
- Organization
- ADVA Optical Networking
- Revisions
- 2018-12-14 00:00, 2018-10-30 00:00, 2018-08-09 00:00, 2018-05-28 00:00, 2018-04-17 00:00, 2018-03-15 00:00, 2018-02-26 00:00, 2017-12-07 00:00, 2017-11-01 00:00, 2017-09-11 00:00, 2017-06-06 00:00, 2017-03-23 00:00, 2016-04-01 00:00, 2015-12-10 00:00, 2015-10-01 00:00, 2015-09-03 00:00, 2015-03-20 00:00, 2014-10-15 00:00, 2014-09-29 00:00, 2013-12-04 00:00, 2013-08-20 00:00, 2011-05-22 00:00
- Namespace
- adva
- Source file
ADVA-FSPR7-DEF-MIB- Digest
sha256:6ebb413249bc1b9d674bbc7e91e0091438db2354914a1bf96ff89f894cf7ca23
Description
This is a MIB definition for ADVA AG Optical Networking entity management.
Contact
EMEA Support Phone : +49 89 89 0665 848 Fax : +49 89 89 0665 22848 Email : support@advaoptical.com North American Support Phone : 886 442 ADVA (2382) (toll-free within the US, Canada and Mexico) Fax : + 1 806 741 8529 (elsewhere) Email : support-usa@advaoptical.com Asia Pacific Support Phone : + 1 866 442 2382 (other toll-free numbers available in some countries) Email : support-asia@advaoptical.com
Imports
| From | Symbols |
|---|---|
| ADVA-FSPR7-MIB | entityConnectionClassName, entityContainerClassName, entityContainerExtNo, entityContainerPortNo, entityContainerShelfNo, entityContainerSlotNo, entityCrossConnClassName, entityCrossConnFromClassName, entityCrossConnFromExtNo, entityCrossConnFromPortNo, entityCrossConnFromShelfNo, entityCrossConnFromSlotNo, entityCrossConnToClassName, entityCrossConnToExtNo, entityCrossConnToPortNo, entityCrossConnToShelfNo, entityCrossConnToSlotNo, entityCrossDcnClassName, entityCrossDcnExtNo, entityCrossDcnPortNo, entityCrossDcnShelfNo, entityCrossDcnSlotNo, entityCrsOptLineClassName, entityCrsOptLineFromClassName, entityCrsOptLineFromIndexNo1, entityCrsOptLineFromIndexNo2, entityCrsOptLineFromIndexNo3, entityCrsOptLineFromIndexNo4, entityCrsOptLineToClassName, entityCrsOptLineToIndexNo1, entityCrsOptLineToIndexNo2, entityCrsOptLineToIndexNo3, entityCrsOptLineToIndexNo4, entityDcnClassName, entityDcnExtNo, entityDcnPortNo, entityDcnShelfNo, entityDcnSlotNo, entityEqptClassName, entityEqptExtNo, entityEqptPortNo, entityEqptShelfNo, entityEqptSlotNo, entityExternalPortClassName, entityExternalPortExtNo, entityExternalPortPortNo, entityExternalPortShelfNo, entityExternalPortSlotNo, entityFacilityClassName, entityFacilityExtNo, entityFacilityPortNo, entityFacilityShelfNo, entityFacilitySlotNo, entityFfpClassName, entityFfpExtNo, entityFfpPortNo, entityFfpShelfNo, entityFfpSlotNo, entityOptLineClassName, entityOptLineIndexNo1, entityOpticalMuxClassName, entityOpticalMuxExtNo, entityOpticalMuxPortNo, entityOpticalMuxShelfNo, entityOpticalMuxSlotNo, entityShelfConnClassName, entityShelfConnExtNo, entityShelfConnPortNo, entityShelfConnShelfNo, entityShelfConnSlotNo, entityTerminPointClassName, entityTerminPointIndexNo1, entityTerminPointIndexNo2, entityTerminPointIndexNo3, entityTerminPointIndexNo4 |
| ADVA-FSPR7-TC-MIB | ApsRevertMode, ApsType, CryptoFspR7EncryptionCommunication, FfpType, FspR7APSCommand, FspR7Acp, FspR7AdminState, FspR7AlsMode, FspR7ApsFarEndModule, FspR7BERThreshold, FspR7Baund, FspR7BidirectionalChannel, FspR7Bitrate, FspR7CapInventory, FspR7CdCompensationRange, FspR7CdPostCompensationRange, FspR7ChannelBandwidth, FspR7ChannelIdentifier, FspR7ChannelRangeInventory, FspR7ChannelSpacing, FspR7CodeGain, FspR7Conn, FspR7ConnectorType, FspR7CpAuthType, FspR7DCFiberType, FspR7DeploymentScenario, FspR7DhcpServer, FspR7DisableEnable, FspR7DispersionCompensation, FspR7DispersionModes, FspR7DmsrmtOperation, FspR7EdfaOutputPowerRating, FspR7EnableDisable, FspR7ErrorFwdMode, FspR7FecType, FspR7FiberBrand, FspR7FlowControlMode, FspR7FrameFormat, FspR7FunctionCrs, FspR7Gain, FspR7GainRange, FspR7GccUsage, FspR7IPv6Type, FspR7InterfaceCrossover, FspR7InterfaceType, FspR7InvertTelemetryInputLogic, FspR7IpMode, FspR7IpType, FspR7LLDPNeighbors, FspR7LLDPScope, FspR7LacpMode, FspR7LacpTimeout, FspR7LagPortType, FspR7LaneGroupInventory, FspR7LaserDelayTimer, FspR7Length, FspR7LineCoding, FspR7ManualAuto, FspR7Mapping, FspR7MaxBitErrorRate, FspR7MonLevel, FspR7MuxMethod, FspR7NoYes, FspR7NumberOfChannels, FspR7OpticalBand, FspR7OpticalFiberType, FspR7OpticalGroup, FspR7OpticalInterfaceReach, FspR7OpticalSubBand, FspR7Optimize, FspR7OpuPayloadType, FspR7OscUsage, FspR7OspfMode, FspR7OtdrPeriod, FspR7PathNode, FspR7PlugDataRate, FspR7PlugMode, FspR7PlugType, FspR7PmReset, FspR7PortBehaviour, FspR7PortMode, FspR7PortRole, FspR7ProtectionType, FspR7PsuOutputPower, FspR7RlsAction, FspR7RoadmNumber, FspR7RowStatus, FspR7SingleFiberLocation, FspR7SnmpHexString, FspR7SnmpLongString, FspR7SupplyType, FspR7TelemetryOutput, FspR7TerminationMode, FspR7TiltSet, FspR7TimDetMode, FspR7Topology, FspR7TrafficDirection, FspR7TransmissionMode, FspR7TxOffOnTm, FspR7TypeConnection, FspR7TypeCrs, FspR7Unsigned32Caps, FspR7UntaggedFrames, FspR7VoaMode, FspR7XfpDecisionThres, FspR7YesNo |
| ADVA-MIB | ApsDirection, ApsHoldoffTime, EnableState, EthDuplexMode, FspR7EquipmentType, LoopConfig, OhTerminationLevel, OtnPayloadType, OtnTcmLevel, ProtectionMech, SonetTimingSource, SonetTraceForm, TimMode, VirtualContainerType, fspR7 |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ADVA-FSPR7-DEF-MIB ADVA-FSPR7-MIB ADVA-FSPR7-TC-MIB ADVA-MIB ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| managementDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3 | |||
| specificMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.2 | |||
| crossConnectionDefTable OBJECT-TYPE crossConnectionDefTable | 1.3.6.1.4.1.2544.1.11.10.3.2.6 | not-accessible | current | |
| crossConnectionDefEntry OBJECT-TYPE Entry of crossConnectionDefTable | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1 | not-accessible | current | |
| crossConnectionDefRowStatus OBJECT-TYPE Cross Connection Default RowStatus. | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.1 | FspR7RowStatus | read-only | current |
| crossConnectionDefAdmin OBJECT-TYPE Cross Connection Default Adminstrative State. | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.2 | FspR7AdminState | read-only | current |
| crossConnectionDefRedLineState OBJECT-TYPE Cross Connection Default Red Lined State. | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.3 | FspR7YesNo | read-only | current |
| crossConnectionDefConn OBJECT-TYPE Cross Connection Default Direction. | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.4 | FspR7Conn | read-only | current |
| crossConnectionDefAlias OBJECT-TYPE Cross Connection Default Alias. | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.5 | SnmpAdminString | read-only | current |
| crossConnectionDefPathNode OBJECT-TYPE Cross Connection Default Path Node. | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.6 | FspR7PathNode | read-only | current |
| crossConnectionDefTunnelAid OBJECT-TYPE Cross Connection Default Tunnel AID. | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.7 | SnmpAdminString | read-only | current |
| crossConnectionDefType OBJECT-TYPE Cross Connection Default Type Facility. | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.8 | FspR7InterfaceType | read-only | current |
| crossConnectionDefCrsFunction OBJECT-TYPE Describes the Cross Connect Functionality | 1.3.6.1.4.1.2544.1.11.10.3.2.6.1.9 | FspR7FunctionCrs | read-only | current |
| crossOpticalLineDefTable OBJECT-TYPE crossOpticalLineDefTable | 1.3.6.1.4.1.2544.1.11.10.3.2.7 | not-accessible | current | |
| crossOpticalLineDefEntry OBJECT-TYPE Entry of crossOpticalLineDefTable | 1.3.6.1.4.1.2544.1.11.10.3.2.7.1 | not-accessible | current | |
| crossOpticalLineDefRowStatus OBJECT-TYPE Cross Connection Default RowStatus. | 1.3.6.1.4.1.2544.1.11.10.3.2.7.1.1 | FspR7RowStatus | read-only | current |
| crossOpticalLineDefRedLineState OBJECT-TYPE Cross Optical Line Default Red Lined State. | 1.3.6.1.4.1.2544.1.11.10.3.2.7.1.2 | FspR7YesNo | read-only | current |
| crossOpticalLineDefConn OBJECT-TYPE Cross Optical Line Default Direction. | 1.3.6.1.4.1.2544.1.11.10.3.2.7.1.3 | FspR7Conn | read-only | current |
| crossOpticalLineDefCrsType OBJECT-TYPE Cross Optical Line Default Type. | 1.3.6.1.4.1.2544.1.11.10.3.2.7.1.4 | FspR7TypeCrs | read-only | current |
| crossOpticalLineDefAlias OBJECT-TYPE Cross Optical Line Default Alias. | 1.3.6.1.4.1.2544.1.11.10.3.2.7.1.5 | SnmpAdminString | read-only | current |
| crossOpticalLineDefTunnelAid OBJECT-TYPE Cross Optical Line Default Tunnel AID. | 1.3.6.1.4.1.2544.1.11.10.3.2.7.1.6 | SnmpAdminString | read-only | current |
| endOfCrossOpticalLineDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.2.8 | Integer32 | read-only | current |
| crossDcnDefTable OBJECT-TYPE crossDcnDefTable | 1.3.6.1.4.1.2544.1.11.10.3.2.9 | not-accessible | current | |
| crossDcnDefEntry OBJECT-TYPE Entry of crossDcnDefTable | 1.3.6.1.4.1.2544.1.11.10.3.2.9.1 | not-accessible | current | |
| crossDcnDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.2.9.1.1 | RowStatus | read-only | current |
| crossDcnDefType OBJECT-TYPE Type of Cross-Connect | 1.3.6.1.4.1.2544.1.11.10.3.2.9.1.2 | FspR7TypeConnection | read-only | current |
| crossDcnDefLink OBJECT-TYPE Address Identifier of PPPIP LINK Entity. | 1.3.6.1.4.1.2544.1.11.10.3.2.9.1.3 | SnmpAdminString | read-only | current |
| crossDcnDefEcc OBJECT-TYPE Address Identifier of ECC Entity. | 1.3.6.1.4.1.2544.1.11.10.3.2.9.1.4 | SnmpAdminString | read-only | current |
| endOfCrossDcnDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.2.10 | Integer32 | read-only | current |
| endOfSpecificMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.2.10000 | Integer32 | read-only | current |
| eqptMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.3 | |||
| shelfDefTable OBJECT-TYPE shelfCapTable | 1.3.6.1.4.1.2544.1.11.10.3.3.1 | not-accessible | current | |
| shelfDefEntry OBJECT-TYPE Entry of shelfCapTable | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1 | not-accessible | current | |
| shelfDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.1 | RowStatus | read-only | current |
| shelfDefPsuOutputPower OBJECT-TYPE Maximum PSU Output Power | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.2 | FspR7PsuOutputPower | read-only | current |
| shelfDefType OBJECT-TYPE The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules) | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.3 | FspR7EquipmentType | read-only | current |
| shelfDefRack OBJECT-TYPE Rack Containing Shelf | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.4 | SnmpAdminString | read-only | current |
| shelfDefSupply OBJECT-TYPE The kind of power supply - provisioned value | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.5 | FspR7SupplyType | read-only | current |
| shelfDefBandProvision OBJECT-TYPE Band Provision. Reference to BAND__INVENTORY. | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.6 | FspR7OpticalBand | read-only | current |
| shelfDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.7 | FspR7AdminState | read-only | current |
| shelfDefRackNumber OBJECT-TYPE Number of the Rack | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.8 | Unsigned32 (0..16) | read-only | current |
| shelfDefRackOrder OBJECT-TYPE Defines the position of the shelf in a rack, starting from the top or bottom for the rack depending on Shelf Order (COUNT__ORDER). Shelf Position is used with Shelf Order for the graphical rack view. | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.9 | Unsigned32 (0..45) | read-only | current |
| shelfDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.10 | SnmpAdminString | read-only | current |
| shelfDefSlot OBJECT-TYPE Slot Position | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.11 | Unsigned32 (0..20) | read-only | current |
| shelfDefPowerSupplyProtection OBJECT-TYPE Power Supply Redundancy Configuration | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.12 | FspR7EnableDisable | read-only | current |
| shelfDefAirFilterClear OBJECT-TYPE Operation to clear air filter replace condition and reset replacement count | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.13 | FspR7RlsAction | read-only | current |
| shelfDefAirFilterCycle OBJECT-TYPE Sets the replacement duration for the air filter replace time setting in months; a setting of 0 prevents the replacement warning alram from being raised | 1.3.6.1.4.1.2544.1.11.10.3.3.1.1.14 | Unsigned32 (0..24) | read-only | current |
| endOfShelfDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.3.2 | Integer32 | read-only | current |
| fanDefTable OBJECT-TYPE fanCapTable | 1.3.6.1.4.1.2544.1.11.10.3.3.3 | not-accessible | current | |
| fanDefEntry OBJECT-TYPE Entry of fanCapTable | 1.3.6.1.4.1.2544.1.11.10.3.3.3.1 | not-accessible | current | |
| fanDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.3.3.1.1 | RowStatus | read-only | current |
| fanDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.3.3.1.2 | FspR7AdminState | read-only | current |
| fanDefType OBJECT-TYPE The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules) | 1.3.6.1.4.1.2544.1.11.10.3.3.3.1.3 | FspR7EquipmentType | read-only | current |
| fanDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.3.3.1.4 | SnmpAdminString | read-only | current |
| fanDefOutputReset OBJECT-TYPE Has the same function as the HW switch at the UTM board | 1.3.6.1.4.1.2544.1.11.10.3.3.3.1.5 | FspR7RlsAction | read-only | current |
| endOfFanDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.3.4 | Integer32 | read-only | current |
| plugDefTable OBJECT-TYPE plugCapTable | 1.3.6.1.4.1.2544.1.11.10.3.3.5 | not-accessible | current | |
| plugDefEntry OBJECT-TYPE Entry of plugCapTable | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1 | not-accessible | current | |
| plugDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.1 | RowStatus | read-only | current |
| plugDefConnector OBJECT-TYPE Connector | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.2 | FspR7ConnectorType | read-only | current |
| plugDefType OBJECT-TYPE The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules) | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.3 | FspR7EquipmentType | read-only | current |
| plugDefReach OBJECT-TYPE Reach | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.4 | FspR7OpticalInterfaceReach | read-only | current |
| plugDefLoopbackAttenuation OBJECT-TYPE Loop back attenuation used for Optojack SE plugs | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.5 | Unsigned32 (10..300) | read-only | current |
| plugDefTransmitChannel OBJECT-TYPE Channel | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.6 | FspR7ChannelIdentifier | read-only | current |
| plugDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.7 | SnmpAdminString | read-only | current |
| plugDefLaneGroup OBJECT-TYPE Lane group to provision | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.8 | FspR7LaneGroupInventory | read-only | current |
| plugDefMaxDataRate OBJECT-TYPE Rate | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.9 | FspR7PlugDataRate | read-only | current |
| plugDefThirdPartyUsage OBJECT-TYPE Usage of 3rd Party Plugs | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.10 | EnableState | read-only | current |
| plugDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.11 | FspR7AdminState | read-only | current |
| plugDefBidirectionalChannel OBJECT-TYPE Bidirectional Channel Rates from Provisioning | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.12 | FspR7BidirectionalChannel | read-only | current |
| plugDefChannelSpacingProvision OBJECT-TYPE Channel Space Provision, reference to CHA-SPC__INVENTORY | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.13 | FspR7ChannelSpacing | read-only | current |
| plugDefLength OBJECT-TYPE Length | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.14 | FspR7Length | read-only | current |
| plugDefPlugType OBJECT-TYPE Plug Type | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.15 | FspR7PlugType | read-only | current |
| plugDefPlugMode OBJECT-TYPE Plug Mode | 1.3.6.1.4.1.2544.1.11.10.3.3.5.1.16 | FspR7PlugMode | read-only | current |
| endOfPlugDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.3.6 | Integer32 | read-only | current |
| moduleDefTable OBJECT-TYPE moduleCapTable | 1.3.6.1.4.1.2544.1.11.10.3.3.7 | not-accessible | current | |
| moduleDefEntry OBJECT-TYPE Entry of moduleCapTable | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1 | not-accessible | current | |
| moduleDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.1 | RowStatus | read-only | current |
| moduleDefPsuOutputPower OBJECT-TYPE Maximum PSU Output Power | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.2 | FspR7PsuOutputPower | read-only | current |
| moduleDefPower OBJECT-TYPE Optical Output Power Rating - Provision | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.3 | FspR7EdfaOutputPowerRating | read-only | current |
| moduleDefReach OBJECT-TYPE Reach | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.4 | FspR7OpticalInterfaceReach | read-only | current |
| moduleDefInitEqlz OBJECT-TYPE Initiate Equalization | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.5 | FspR7RlsAction | read-only | current |
| moduleDefLanAid OBJECT-TYPE AID of LAN | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.6 | SnmpAdminString | read-only | current |
| moduleDefType OBJECT-TYPE The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules) | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.7 | FspR7EquipmentType | read-only | current |
| moduleDefMapping OBJECT-TYPE Type of mapping; transparent or framing | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.8 | FspR7Mapping | read-only | current |
| moduleDefGainRange OBJECT-TYPE EDFA gain range to provision | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.9 | FspR7GainRange | read-only | current |
| moduleDefSfProvision OBJECT-TYPE determines the location (A or B) for Single Fiber applications | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.10 | FspR7SingleFiberLocation | read-only | current |
| moduleDefCapabilityLevelProvision OBJECT-TYPE Capability level provisioned | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.11 | FspR7CapInventory | read-only | current |
| moduleDefDCFiberType OBJECT-TYPE Dispersion Compensation Fibertype | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.12 | FspR7DCFiberType | read-only | current |
| moduleDefChannelsProvision OBJECT-TYPE Number of channels supported by an entity | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.13 | FspR7NumberOfChannels | read-only | current |
| moduleDefFiberDetect OBJECT-TYPE Fiber Detect | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.14 | FspR7EnableDisable | read-only | current |
| moduleDefSupply OBJECT-TYPE The kind of power supply - provisioned value | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.15 | FspR7SupplyType | read-only | current |
| moduleDefGroup OBJECT-TYPE The Group of 4 DWDM channels or the Group of 4 CWDM channels | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.16 | FspR7OpticalGroup | read-only | current |
| moduleDefDeploy OBJECT-TYPE Describes how the card is applied related to a network scenario | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.17 | FspR7DeploymentScenario | read-only | current |
| moduleDefLagSysPrio OBJECT-TYPE Link Aggregation Group Actor System Priority Part of LAG ID | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.18 | Unsigned32 (0..65535) | read-only | current |
| moduleDefTransmitChannel OBJECT-TYPE Channel | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.19 | FspR7ChannelIdentifier | read-only | current |
| moduleDefBand OBJECT-TYPE The optical band of the module. | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.20 | FspR7OpticalBand | read-only | current |
| moduleDefTrafficDirection OBJECT-TYPE Traffic Direction | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.21 | FspR7TrafficDirection | read-only | current |
| moduleDefIpAddr OBJECT-TYPE IP Address assigned to LAN IP Interface | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.22 | IpAddress | read-only | current |
| moduleDefDispersionCompensation OBJECT-TYPE Dispersion Compensation Value in km of SSMF fiber | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.23 | FspR7DispersionCompensation | read-only | current |
| moduleDefActivateDetect OBJECT-TYPE Initialize Topology Detection | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.24 | FspR7YesNo | read-only | current |
| moduleDefOscUsage OBJECT-TYPE Select if and how the OSC is to be used on an amplifier | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.25 | FspR7OscUsage | read-only | current |
| moduleDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.26 | FspR7AdminState | read-only | current |
| moduleDefScrambling OBJECT-TYPE Configuration of scrambling functionality for Virtual Facilities | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.27 | FspR7EnableDisable | read-only | current |
| moduleDefChannelsNumber OBJECT-TYPE Number of channels supported by an entity | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.28 | FspR7NumberOfChannels | read-only | current |
| moduleDefChannelSpacingProvision OBJECT-TYPE Channel Space Provision, reference to CHA-SPC__INVENTORY | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.29 | FspR7ChannelSpacing | read-only | current |
| moduleDefMode OBJECT-TYPE Mode of the module, determine operation or functionality | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.30 | FspR7TransmissionMode | read-only | current |
| moduleDefSubBandProvision OBJECT-TYPE Subband - Provision | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.31 | FspR7OpticalSubBand | read-only | current |
| moduleDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.32 | SnmpAdminString | read-only | current |
| moduleDefFiberType OBJECT-TYPE Fiber of Optical Interface - Provision, Reference to FIBER__INVENTORY | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.33 | FspR7OpticalFiberType | read-only | current |
| moduleDefChannelSpacing OBJECT-TYPE ITU Grid channel spacing | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.34 | FspR7ChannelSpacing | read-only | current |
| moduleDefOutputReset OBJECT-TYPE Has the same function as the HW switch at the UTM board | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.35 | FspR7RlsAction | read-only | current |
| moduleDefRoadmNumber OBJECT-TYPE Number for ROADM module typically associated with a Network Fiber or Degree | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.36 | FspR7RoadmNumber | read-only | current |
| moduleDefTopology OBJECT-TYPE Shows the card topology in the NE | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.37 | FspR7Topology | read-only | current |
| moduleDefForceConfig OBJECT-TYPE Force cserver to send down configuration to module | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.38 | FspR7RlsAction | read-only | current |
| moduleDefMuxMethod OBJECT-TYPE Selection of mux method | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.39 | FspR7MuxMethod | read-only | current |
| moduleDefNdpCleanup OBJECT-TYPE Cleanup Network Data Path allocation | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.40 | FspR7RlsAction | read-only | current |
| moduleDefRstp OBJECT-TYPE Rapid spanning tree protocol | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.41 | FspR7EnableDisable | read-only | current |
| moduleDefRemoteReset OBJECT-TYPE Remote reset of module. This parameter will be available only on SH9HU and SH1HUPF shelves. | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.42 | FspR7RlsAction | read-only | current |
| moduleDefPartner1 OBJECT-TYPE External Protection Trigger Entity AID #1 | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.43 | SnmpAdminString | read-only | current |
| moduleDefPartner2 OBJECT-TYPE External Protection Trigger Entity AID #2 | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.44 | SnmpAdminString | read-only | current |
| moduleDefPartner3 OBJECT-TYPE External Protection Trigger Entity AID #3 | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.45 | SnmpAdminString | read-only | current |
| moduleDefPartner4 OBJECT-TYPE External Protection Trigger Entity AID #4 | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.46 | SnmpAdminString | read-only | current |
| moduleDefAcp OBJECT-TYPE APS communication partner | 1.3.6.1.4.1.2544.1.11.10.3.3.7.1.47 | FspR7Acp | read-create | current |
| endOfModuleDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.3.8 | Integer32 | read-only | current |
| endOfEqptMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.3.10000 | Integer32 | read-only | current |
| facilityMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.4 | |||
| physicalPortDefTable OBJECT-TYPE physicalPortDefTable | 1.3.6.1.4.1.2544.1.11.10.3.4.1 | not-accessible | current | |
| physicalPortDefEntry OBJECT-TYPE Entry of physicalPortDefTable | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1 | not-accessible | current | |
| physicalPortDefRowStatus OBJECT-TYPE Physical Port Capability RowStatus. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.1 | RowStatus | read-only | current |
| physicalPortDefType OBJECT-TYPE Physical Port Capability Facility Type. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.2 | FspR7InterfaceType | read-only | current |
| physicalPortDefAdmin OBJECT-TYPE Physical Port Capability Adminstrative State. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.3 | FspR7AdminState | read-only | current |
| physicalPortDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.4 | SnmpAdminString | read-only | current |
| physicalPortDefAlsMode OBJECT-TYPE Determines the reaction in backward direction in response to a LOS on the same Interface: on a Network Interface connected to the DWDM this is a matter of laser safety | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.5 | FspR7AlsMode | read-only | current |
| physicalPortDefAutoThresReset OBJECT-TYPE Adaptive Threshold Control Reset | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.6 | FspR7RlsAction | read-only | current |
| physicalPortDefAutonegotiation OBJECT-TYPE Auto Negotiation for the data rate | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.7 | EnableState | read-only | current |
| physicalPortDefBehaviour OBJECT-TYPE Behavior or Port usage based on configuration/usage in the system regardless of faceplate designation | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.8 | FspR7PortBehaviour | read-only | current |
| physicalPortDefDispertionConfig OBJECT-TYPE Chromatic Dispersion Compensation | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.9 | FspR7RlsAction | read-only | current |
| physicalPortDefDispersionSetting OBJECT-TYPE Chromatic Dispersion Compensation setting on module | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.10 | Integer32 (-50000..50000) | read-only | current |
| physicalPortDefDispersionMode OBJECT-TYPE Chromatic Dispersion Compensation Mode | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.11 | FspR7DispersionModes | read-only | current |
| physicalPortDefChannelProv OBJECT-TYPE Channel | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.12 | FspR7ChannelIdentifier | read-only | current |
| physicalPortDefWdmRxChannel OBJECT-TYPE Channel Number for the Receive Interface | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.13 | FspR7ChannelIdentifier | read-only | current |
| physicalPortDefCodeGain OBJECT-TYPE Forward Error Correction Coding gain | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.14 | FspR7CodeGain | read-only | current |
| physicalPortDefXfpDecisionThres OBJECT-TYPE XFP Decision threshold setting | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.15 | FspR7XfpDecisionThres | read-only | current |
| physicalPortDefDisparityCorrection OBJECT-TYPE Disparity correction | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.16 | EnableState | read-only | current |
| physicalPortDefEqlzAdmin OBJECT-TYPE Scheduled Equalization Administration | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.17 | FspR7EnableDisable | read-only | current |
| physicalPortDefErrorForwarding OBJECT-TYPE Determines the reaction in forward direction in response to a LOS on the interface on the opposite side of the module: may override this behaviour in the interests of laser safety. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.18 | FspR7ErrorFwdMode | read-only | current |
| physicalPortDefFecType OBJECT-TYPE Forward Error Correction (Only relevant where TYPE = OTU#) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.19 | FspR7FecType | read-only | current |
| physicalPortDefFarEndCommunication OBJECT-TYPE Used for Optojack plugs; Communication to Far End Plug is observed | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.20 | FspR7YesNo | read-only | current |
| physicalPortDefFlowControl OBJECT-TYPE Flow Control mechanism | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.21 | FspR7FlowControlMode | read-only | current |
| physicalPortDefForceLaserOn OBJECT-TYPE Laser Forced On | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.22 | FspR7RlsAction | read-only | current |
| physicalPortDefInhibitSwitchToProt OBJECT-TYPE Inhibit Switch to protection facility. Inhibition blocks an automatic switch to the protection facility. Valid only for the working facility. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.23 | FspR7YesNo | read-only | current |
| physicalPortDefInhibitSwitchToWork OBJECT-TYPE Inhibit Switch to working facility. Inhibition blocks an automatic switch to the working facility. Valid only for the protection facility. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.24 | FspR7YesNo | read-only | current |
| physicalPortDefLaneChannelSetting OBJECT-TYPE Lane Channel Setting | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.25 | FspR7ChannelIdentifier | read-only | current |
| physicalPortDefLoopConfig OBJECT-TYPE The configuration of the loopback function. - noLoop: no loop configuration on the interface. - lineLoop: the incoming signal is looped to the outgoing line on the interface. The incoming signal is sent in the downstream direction and processed as normal. - inwardLoop: the output signal is looped to the incoming line on the interface. The looped signal is transmitted unchanged on the optical output. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.26 | LoopConfig | read-only | current |
| physicalPortDefLaserDelayTimer OBJECT-TYPE Relevant only when ERRFWD=LSROFF. Enables/disables the possibility to delay turning off and on the laser. This applies to the case when turning off the laser is done as an error forwarding mechanism. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.27 | FspR7LaserDelayTimer | read-only | current |
| physicalPortDefLaserOffTimer OBJECT-TYPE Delay before laser is swiched off | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.28 | Unsigned32 (1..1000) | read-only | current |
| physicalPortDefLaserOnTimer OBJECT-TYPE Delay before laser is switched on | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.29 | Unsigned32 (1..1000) | read-only | current |
| physicalPortDefLaserOffDelayFunction OBJECT-TYPE A configuration request for the Laser Off Delay function. This function delays turning off the laser as a consequent action to a defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.30 | EnableState | read-only | current |
| physicalPortDefAutoPTassignment OBJECT-TYPE Auto assignment of ODU PT | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.31 | FspR7ManualAuto | read-only | current |
| physicalPortDefTributarySlotMethod OBJECT-TYPE Tributary Slot assignment method | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.32 | FspR7ManualAuto | read-only | current |
| physicalPortDefInitiateEqualization OBJECT-TYPE Initiate Equalization | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.33 | FspR7RlsAction | read-only | current |
| physicalPortDefLossAttenuation OBJECT-TYPE LOS Attenuation Finding in progress | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.34 | FspR7RlsAction | read-only | current |
| physicalPortDefOpticalSetPoint OBJECT-TYPE Sets the optical power for power equalization in ROADM or for channel power control in OPCM | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.35 | Integer32 (-250..100) | read-only | current |
| physicalPortDefDataLayerPmReset OBJECT-TYPE Reset data-layer Performance registers | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.36 | FspR7PmReset | read-only | current |
| physicalPortDefPrbsPmReset OBJECT-TYPE Reset PRBS PM counters | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.37 | FspR7PmReset | read-only | current |
| physicalPortDefTestPrbsRcvMode OBJECT-TYPE PRBS test pattern received | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.38 | FspR7RlsAction | read-only | current |
| physicalPortDefTestPrbsTrmtMode OBJECT-TYPE PRBS test pattern transmitted | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.39 | FspR7RlsAction | read-only | current |
| physicalPortDefSwitchCommand OBJECT-TYPE The switch command action for this facility. A command resulting in a switch event will also cause a change of the facility secondary state and a corresponding condition. Addressed by this command is the active port, the port to switch away from. Since this is a manual switch command, it will not switch if other port suffers from a signalfailure or a signal degrade. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.40 | FspR7APSCommand | read-only | current |
| physicalPortDefOpuPayloadType OBJECT-TYPE OPU Payload Type Indicator | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.41 | FspR7OpuPayloadType | read-only | current |
| physicalPortDefSigDegThresSonetLine OBJECT-TYPE Bit-Error-Based Degradation Definition for SONET (standard integration period) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.42 | FspR7BERThreshold | read-only | current |
| physicalPortDefSigDegThresSdhMs OBJECT-TYPE Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-RS). | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.43 | Unsigned32 (1..100) | read-only | current |
| physicalPortDefSigDegThresOtu OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for OTU | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.44 | Integer32 (1..100) | read-only | current |
| physicalPortDefSigDegThresOdu OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for ODU | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.45 | Integer32 (1..100) | read-only | current |
| physicalPortDefSigDegThreshold OBJECT-TYPE Threshold for number of errors (CV or CV+DE) in one second | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.46 | Unsigned32 (1..10000) | read-only | current |
| physicalPortDefSigDegPcslThreshold OBJECT-TYPE Block-Error-Based Degradation Definition for Physical Coding Sublayer | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.47 | Unsigned32 (1..100) | read-only | current |
| physicalPortDefSigDegThresSonetSection OBJECT-TYPE Bit-Error-Based Degradation Definition for SONET (standard integration period) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.48 | FspR7BERThreshold | read-only | current |
| physicalPortDefSigDegThresSdhSection OBJECT-TYPE Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-RS). | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.49 | Unsigned32 (1..100) | read-only | current |
| physicalPortDefSigDegThresOduTcmA OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-A | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.50 | Integer32 (1..100) | read-only | current |
| physicalPortDefSigDegThresOduTcmB OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-B | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.51 | Integer32 (1..100) | read-only | current |
| physicalPortDefSigDegThresOduTcmC OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-C | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.52 | Integer32 (1..100) | read-only | current |
| physicalPortDefSignalDegradePeriod OBJECT-TYPE The measurement period in seconds used together with the deployProvIfSigDegThresSdhRegSect based on the block error counting method. The valid range is 2..10, The default being 7. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.53 | Unsigned32 (2..10) | read-only | current |
| physicalPortDefSigDegPeriodOdu OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.54 | Unsigned32 (2..10) | read-only | current |
| physicalPortDefSigDegPeriodOtu OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.55 | Unsigned32 (2..10) | read-only | current |
| physicalPortDefSigDegPeriodIntegration OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.56 | Unsigned32 (1..10) | read-only | current |
| physicalPortDefSigDegPeriodSdhSection OBJECT-TYPE Provisionable Signal Degrade Integration Period for SDH | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.57 | Unsigned32 (2..10) | read-only | current |
| physicalPortDefSigDegPeriodOduTcmA OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.58 | Unsigned32 (2..10) | read-only | current |
| physicalPortDefSigDegPeriodOduTcmB OBJECT-TYPE Integration Period of TCMB Signal Segrade | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.59 | Unsigned32 (2..10) | read-only | current |
| physicalPortDefSigDegPeriodOduTcmC OBJECT-TYPE Integration Period of TCMC Signal Segrade | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.60 | Unsigned32 (2..10) | read-only | current |
| physicalPortDefOtnStuffing OBJECT-TYPE Indicates if bit/byte stuffing is used in the transport signal. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.61 | FspR7YesNo | read-only | current |
| physicalPortDefTcmALevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance A | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.62 | OtnTcmLevel | read-only | current |
| physicalPortDefTcmBLevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance B | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.63 | OtnTcmLevel | read-only | current |
| physicalPortDefTcmCLevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance C | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.64 | OtnTcmLevel | read-only | current |
| physicalPortDefTerminationLevel OBJECT-TYPE Highest signal level hardware removes then generates for transmission. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.65 | OhTerminationLevel | read-only | current |
| physicalPortDefTimingSource OBJECT-TYPE The timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation). - loopTiming: e.g. used in point-to-point via SONET network and feeder topologies. The default is internal(1). | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.66 | SonetTimingSource | read-only | current |
| physicalPortDefTimModeOdu OBJECT-TYPE Detection of TIM-ODU Condition can be configured | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.67 | TimMode | read-only | current |
| physicalPortDefTimModeOtu OBJECT-TYPE OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.68 | TimMode | read-only | current |
| physicalPortDefTimModeSonetSection OBJECT-TYPE SONET Section Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.69 | TimMode | read-only | current |
| physicalPortDefTimModeOduTcmA OBJECT-TYPE TCM_A Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.70 | TimMode | read-only | current |
| physicalPortDefTimModeOduTcmB OBJECT-TYPE TCM_B Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.71 | TimMode | read-only | current |
| physicalPortDefTimModeOduTcmC OBJECT-TYPE TCM_C Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.72 | TimMode | read-only | current |
| physicalPortDefTraceFormSonetSection OBJECT-TYPE Byte-Length of Trace Compared to Expected | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.73 | SonetTraceForm | read-only | current |
| physicalPortDefTraceExpectedSonetSection OBJECT-TYPE Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.74 | OCTET STRING (SIZE(0..62)) | read-only | current |
| physicalPortDefTraceTransmitSonetSection OBJECT-TYPE Sec/RS Trace to be Transmitted | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.75 | OCTET STRING (SIZE(0..62)) | read-only | current |
| physicalPortDefTraceExpectedOtu OBJECT-TYPE Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.76 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitSapiOtu OBJECT-TYPE The transmitted SAPI part of the OTU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.77 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitDapiOtu OBJECT-TYPE The transmitted DAPI part of the OTU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.78 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitOpspOtu OBJECT-TYPE The transmitted Operator Specific part of the OTU trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.79 | OCTET STRING (SIZE(0..32)) | read-only | current |
| physicalPortDefTraceExpectedOdu OBJECT-TYPE Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.80 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitSapiOdu OBJECT-TYPE The transmitted SAPI part of the ODU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.81 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitDapiOdu OBJECT-TYPE The transmitted DAPI part of the ODU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.82 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitOpspOdu OBJECT-TYPE The transmitted Operator Specific part of the ODU trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.83 | OCTET STRING (SIZE(0..32)) | read-only | current |
| physicalPortDefTraceExpectedOduTcmA OBJECT-TYPE Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.84 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitSapiOduTcmA OBJECT-TYPE The transmitted SAPI part of the TCMA trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.85 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitDapiOduTcmA OBJECT-TYPE The transmitted DAPI part of the TCMA trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.86 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitOpspOduTcmA OBJECT-TYPE The transmitted Operator Specific part of the TCMA trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.87 | OCTET STRING (SIZE(0..32)) | read-only | current |
| physicalPortDefTraceExpectedOduTcmB OBJECT-TYPE Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.88 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitSapiOduTcmB OBJECT-TYPE The transmitted SAPI part of the TCMB trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.89 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitDapiOduTcmB OBJECT-TYPE The transmitted DAPI part of the TCMB trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.90 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitOpspOduTcmB OBJECT-TYPE The transmitted Operator Specific part of the TCMB trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.91 | OCTET STRING (SIZE(0..32)) | read-only | current |
| physicalPortDefTraceExpectedOduTcmC OBJECT-TYPE Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.92 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitSapiOduTcmC OBJECT-TYPE The transmitted SAPI part of the TCMC trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.93 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitDapiOduTcmC OBJECT-TYPE The transmitted DAPI part of the TCMC trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.94 | OCTET STRING (SIZE(0..15)) | read-only | current |
| physicalPortDefTraceTransmitOpspOduTcmC OBJECT-TYPE The transmitted Operator Specific part of the TCMC trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.95 | OCTET STRING (SIZE(0..32)) | read-only | current |
| physicalPortDefTurnupConfig OBJECT-TYPE Turnup Operation | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.96 | FspR7RlsAction | read-only | current |
| physicalPortDefTxOffDelay OBJECT-TYPE Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.97 | FspR7EnableDisable | read-only | current |
| physicalPortDefVoaMode OBJECT-TYPE VOA operating mode | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.98 | FspR7VoaMode | read-only | current |
| physicalPortDefVoaSetpoint OBJECT-TYPE Sets the optical attenuation of VOA | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.99 | Unsigned32 (0..300) | read-only | current |
| physicalPortDefLagPrio OBJECT-TYPE Part of ID. Port pri that defines standby. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.100 | Unsigned32 (0..65535) | read-only | current |
| physicalPortDefMaxFrameSize OBJECT-TYPE Max Frame Size | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.101 | Unsigned32 (1518..9600) | read-only | current |
| physicalPortDefPayload OBJECT-TYPE The PAYLOAD defines the transport service type of the payload | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.102 | OtnPayloadType | read-only | current |
| physicalPortDefPortMode OBJECT-TYPE Port Mode | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.103 | FspR7PortMode | read-only | current |
| physicalPortDefPortRole OBJECT-TYPE ADVA cloud Port Roles | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.104 | FspR7PortRole | read-only | current |
| physicalPortDefPriority OBJECT-TYPE Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.105 | Unsigned32 (0..7) | read-only | current |
| physicalPortDefPvid OBJECT-TYPE Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.106 | Unsigned32 (1..4095) | read-only | current |
| physicalPortDefStagType OBJECT-TYPE TAG type field | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.107 | FspR7SnmpHexString | read-only | current |
| physicalPortDefUtag OBJECT-TYPE If untagged frames shall be enabled on this port or not. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.108 | FspR7UntaggedFrames | read-only | current |
| physicalPortDefVethAid OBJECT-TYPE Shows if PORT is a member in the LAG with the VETH AID | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.109 | SnmpAdminString | read-only | current |
| physicalPortDefRedLineState OBJECT-TYPE will be set by higher level software to act as a barrier to deletion | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.110 | FspR7YesNo | read-only | current |
| physicalPortDefTunnelAid OBJECT-TYPE Tunnel AID | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.111 | SnmpAdminString | read-only | current |
| physicalPortDefRateLimit OBJECT-TYPE Selection to apply rate limit feature or not. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.112 | FspR7DisableEnable | read-only | current |
| physicalPortDefTxOffOnTm OBJECT-TYPE Relevant only when ERRFWD=TXOFF. Enables/disables the possibility to delay turning off and on the the transmitter. This applies to the case when turning off the transmitter is done as an error forwarding mechanism. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.113 | FspR7TxOffOnTm | read-only | current |
| physicalPortDefTxOffTimer OBJECT-TYPE Delay before transmitter is swiched off | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.114 | Unsigned32 (1..1000) | read-only | current |
| physicalPortDefTxOnTimer OBJECT-TYPE Delay before transmitter is switched on | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.115 | Unsigned32 (1..1000) | read-only | current |
| physicalPortDefMode OBJECT-TYPE Mode of the module, determine operation or functionality | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.116 | FspR7TransmissionMode | read-only | current |
| physicalPortDefMonLevel OBJECT-TYPE Highest signal level of intrusive or non-intrusive monitoring. Hardware may monitor the signal one layer higher than Termination Level (TERM). | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.117 | FspR7MonLevel | read-only | current |
| physicalPortDefChannelPlan OBJECT-TYPE Channel Range | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.118 | FspR7ChannelRangeInventory | read-only | current |
| physicalPortDefOptimize OBJECT-TYPE Optimizes port for either protection switch time or traffic regeneration operation | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.119 | FspR7Optimize | read-only | current |
| physicalPortDefEncryptionChannel OBJECT-TYPE Embedded Communication Channel used to support Encryption | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.120 | CryptoFspR7EncryptionCommunication | read-only | current |
| physicalPortDefLinkSetup OBJECT-TYPE Support RDMA over Converged Ethernet (RoCE) | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.121 | FspR7DisableEnable | read-only | current |
| physicalPortDefCdCompensationRange OBJECT-TYPE Chromatic Dispersion Compensation Goal | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.122 | FspR7CdCompensationRange | read-only | current |
| physicalPortDefChannelSpacing OBJECT-TYPE ITU Grid channel spacing | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.123 | FspR7ChannelSpacing | read-only | current |
| physicalPortDefLLDPNeighborsRx OBJECT-TYPE LLDP Neighbors in Rx Direction | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.124 | FspR7LLDPNeighbors | read-only | current |
| physicalPortDefLLDPNeighborsTx OBJECT-TYPE LLDP Neighbors in Tx Direction | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.125 | FspR7LLDPNeighbors | read-only | current |
| physicalPortDefCdPostCompensationRange OBJECT-TYPE CD Post Compensation Range Range 1: [-22 ns/nm to +6 ns/nm] or [-20 ns/nm to +2 ns/nm] Range 2: [-72 ns/nm to +6 ns/nm] or [-45 ns/nm to +5 ns/nm] Range 3: [-120 ns/nm to +6 ns/nm] Range 4: [-280 ns/nm to +6 ns/nm] | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.126 | FspR7CdPostCompensationRange | read-only | current |
| physicalPortDefLaneChannel1 OBJECT-TYPE Lane Channel | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.127 | FspR7ChannelIdentifier | read-only | current |
| physicalPortDefLaneChannel2 OBJECT-TYPE Lane Channel | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.128 | FspR7ChannelIdentifier | read-only | current |
| physicalPortDefOpticalSetPointLane1 OBJECT-TYPE Optical Power Setpoint for Optical Transport Lane 1 | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.129 | Integer32 (-250..100) | read-only | current |
| physicalPortDefOpticalSetPointLane2 OBJECT-TYPE Optical Power Setpoint for Optical Transport Lane 2 | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.130 | Integer32 (-250..100) | read-only | current |
| physicalPortDefTerminationMode OBJECT-TYPE FSP 3000 C Signal Termination Modes Monitor or Terminate describes general signal handling at layer Mux indicates if signal is multiplexed or demultiplexed at layer Connect indicates support for Sub Network Connection (SNC), cross-connect | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.131 | FspR7TerminationMode | read-only | current |
| physicalPortDefTimDetModeOtu OBJECT-TYPE OTU Trace Identifier Mismatch (TIM) strings compared to generate TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.132 | FspR7TimDetMode | read-only | current |
| physicalPortDefTimActionOtu OBJECT-TYPE Trace Identifier Mismatch (TIM) is reported as an alarm when detected. User selection allow traffic or AIS to be sent while the mismatch is present. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.133 | FspR7YesNo | read-only | current |
| physicalPortDefTraceExpectedDapiOtu OBJECT-TYPE Expected DAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.134 | SnmpAdminString | read-only | current |
| physicalPortDefTraceExpectedOpspOtu OBJECT-TYPE Expected OPSP part of the OTU trace (32 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.135 | SnmpAdminString | read-only | current |
| physicalPortDefTimDetModeOdu OBJECT-TYPE ODU Trace Identifier Mismatch (TIM) strings compared to generate TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.136 | FspR7TimDetMode | read-only | current |
| physicalPortDefTimActionOdu OBJECT-TYPE Trace Identifier Mismatch (TIM) is reported as an alarm when detected. User selection allow traffic or AIS to be sent while the mismatch is present. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.137 | FspR7YesNo | read-only | current |
| physicalPortDefTraceExpectedDapiOdu OBJECT-TYPE Expected DAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.138 | SnmpAdminString | read-only | current |
| physicalPortDefTraceExpectedOpspOdu OBJECT-TYPE Expected OPSP part of the ODU trace (32 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.139 | SnmpAdminString | read-only | current |
| physicalPortDefReportAisLine OBJECT-TYPE Whether AIS alarm (Line/MS) is reported or not. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.140 | FspR7YesNo | read-only | current |
| physicalPortDefReportSsfLine OBJECT-TYPE Whether SSF alarm (Line/MS) is reported or not. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.141 | FspR7YesNo | read-only | current |
| physicalPortDefReportSsfSection OBJECT-TYPE Whether SSF alarm (Section/RS) is reported or not. | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.142 | FspR7YesNo | read-only | current |
| physicalPortDefDelayMeasurementOperation OBJECT-TYPE Delay Measurement start | 1.3.6.1.4.1.2544.1.11.10.3.4.1.1.143 | FspR7DmsrmtOperation | read-only | current |
| virtualPortDefTable OBJECT-TYPE virtualPortDefTable | 1.3.6.1.4.1.2544.1.11.10.3.4.2 | not-accessible | current | |
| virtualPortDefEntry OBJECT-TYPE Entry of virtualPortDefTable | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1 | not-accessible | current | |
| virtualPortDefRowStatus OBJECT-TYPE Virtual Port Capability RowStatus. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.1 | RowStatus | read-only | current |
| virtualPortDefChannelBand OBJECT-TYPE Virtual Port Capability Channel Bandwidth. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.2 | FspR7ChannelBandwidth | read-only | current |
| virtualPortDefType OBJECT-TYPE Virtual Port Capability Facility Type. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.3 | FspR7InterfaceType | read-only | current |
| virtualPortDefAlias OBJECT-TYPE Virtual Port Capability Alias. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.4 | SnmpAdminString | read-only | current |
| virtualPortDefAdmin OBJECT-TYPE Virtual Port Capability Adminstrative State. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.5 | FspR7AdminState | read-only | current |
| virtualPortDefEqlzAdmin OBJECT-TYPE Virtual Port Capability Fiber Connection Attenuation. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.6 | FspR7EnableDisable | read-only | current |
| virtualPortDefInitEqlz OBJECT-TYPE Virtual Port Capability Initiate Equalization. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.7 | FspR7RlsAction | read-only | current |
| virtualPortDefLacpMode OBJECT-TYPE Enable of LACP state machine | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.8 | FspR7LacpMode | read-only | current |
| virtualPortDefLacpTimeout OBJECT-TYPE Timeout of the LACP | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.9 | FspR7LacpTimeout | read-only | current |
| virtualPortDefLagActivePorts OBJECT-TYPE Number of active ports in the Link Aggregation Group | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.10 | Unsigned32 (1..12) | read-only | current |
| virtualPortDefMaxFrameSize OBJECT-TYPE Max Frame Size | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.11 | Unsigned32 (1518..9600) | read-only | current |
| virtualPortDefPortMode OBJECT-TYPE Port Mode | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.12 | FspR7PortMode | read-only | current |
| virtualPortDefDataLayerPmReset OBJECT-TYPE Reset data-layer Performance registers | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.13 | FspR7PmReset | read-only | current |
| virtualPortDefPortRole OBJECT-TYPE ADVA cloud Port Roles | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.14 | FspR7PortRole | read-only | current |
| virtualPortDefLagPortType OBJECT-TYPE Type/Speed of connected ports in the Link Aggregation Group | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.15 | FspR7LagPortType | read-only | current |
| virtualPortDefPriority OBJECT-TYPE Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.16 | Unsigned32 (0..7) | read-only | current |
| virtualPortDefPvid OBJECT-TYPE Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.17 | Unsigned32 (1..4095) | read-only | current |
| virtualPortDefRevertiveMode OBJECT-TYPE Revertive Protection Switching | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.18 | ApsRevertMode | read-only | current |
| virtualPortDefStagType OBJECT-TYPE TAG type field | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.19 | FspR7SnmpHexString | read-only | current |
| virtualPortDefUtag OBJECT-TYPE If untagged frames shall be enabled on this port or not. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.20 | FspR7UntaggedFrames | read-only | current |
| virtualPortDefBundle OBJECT-TYPE List of VC4/VC3/STS1/STS3c/STS24c/STS48c containers used in the BUNDLE | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.21 | FspR7SnmpLongString | read-only | current |
| virtualPortDefSwitchCommand OBJECT-TYPE The switch command action for this facility. A command resulting in a switch event will also cause a change of the facility secondary state and a corresponding condition. Addressed by this command is the active port, the port to switch away from. Since this is a manual switch command, it will not switch if other port suffers from a signalfailure or a signal degrade. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.22 | FspR7APSCommand | read-only | current |
| virtualPortDefInhibitSwitchToWork OBJECT-TYPE Inhibit Switch to working facility. Inhibition blocks an automatic switch to the working facility. Valid only for the protection facility. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.23 | FspR7YesNo | read-only | current |
| virtualPortDefInhibitSwitchToProt OBJECT-TYPE Inhibit Switch to protection facility. Inhibition blocks an automatic switch to the protection facility. Valid only for the working facility. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.24 | FspR7YesNo | read-only | current |
| virtualPortDefOduTribPortNo OBJECT-TYPE ODU Tributary Port Number | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.25 | SnmpAdminString | read-only | current |
| virtualPortDefOduTribTimeSlottNo OBJECT-TYPE ODU Tributary slot number. Multiple values can be entered as a string, separated by commas or given as a range. For capabilities objects possible number of slots and valid range are displayed in a form: [1,2,3,8][count: 1-1] In first brackets valid slots are shown and in the second possible number of slots. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.26 | SnmpAdminString | read-only | current |
| virtualPortDefSigDegThresOdu OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for ODU | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.27 | Integer32 (1..100) | read-only | current |
| virtualPortDefSigDegPeriodOdu OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.28 | Unsigned32 (2..10) | read-only | current |
| virtualPortDefTraceExpectedOdu OBJECT-TYPE Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.29 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitSapiOdu OBJECT-TYPE The transmitted SAPI part of the ODU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.30 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitDapiOdu OBJECT-TYPE The transmitted DAPI part of the ODU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.31 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitOpspOdu OBJECT-TYPE The transmitted Operator Specific part of the ODU trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.32 | OCTET STRING (SIZE(0..32)) | read-only | current |
| virtualPortDefTimModeOdu OBJECT-TYPE Detection of TIM-ODU Condition can be configured | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.33 | TimMode | read-only | current |
| virtualPortDefSigDegThresOduTcmA OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-A | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.34 | Integer32 (1..100) | read-only | current |
| virtualPortDefSigDegPeriodOduTcmA OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.35 | Unsigned32 (2..10) | read-only | current |
| virtualPortDefSigDegThresOduTcmB OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-B | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.36 | Integer32 (1..100) | read-only | current |
| virtualPortDefSigDegPeriodOduTcmB OBJECT-TYPE Integration Period of TCMB Signal Segrade | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.37 | Unsigned32 (2..10) | read-only | current |
| virtualPortDefSigDegThresOduTcmC OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-C | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.38 | Integer32 (1..100) | read-only | current |
| virtualPortDefSigDegPeriodOduTcmC OBJECT-TYPE Integration Period of TCMC Signal Segrade | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.39 | Unsigned32 (2..10) | read-only | current |
| virtualPortDefTcmALevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance A | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.40 | OtnTcmLevel | read-only | current |
| virtualPortDefTcmBLevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance B | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.41 | OtnTcmLevel | read-only | current |
| virtualPortDefTcmCLevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance C | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.42 | OtnTcmLevel | read-only | current |
| virtualPortDefTraceTransmitSapiOduTcmA OBJECT-TYPE The transmitted SAPI part of the TCMA trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.43 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitDapiOduTcmA OBJECT-TYPE The transmitted DAPI part of the TCMA trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.44 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitOpspOduTcmA OBJECT-TYPE The transmitted Operator Specific part of the TCMA trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.45 | OCTET STRING (SIZE(0..32)) | read-only | current |
| virtualPortDefTraceExpectedOduTcmA OBJECT-TYPE Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.46 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTimModeOduTcmA OBJECT-TYPE TCM_A Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.47 | TimMode | read-only | current |
| virtualPortDefTraceExpectedOduTcmB OBJECT-TYPE Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.48 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitSapiOduTcmB OBJECT-TYPE The transmitted SAPI part of the TCMB trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.49 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitDapiOduTcmB OBJECT-TYPE The transmitted DAPI part of the TCMB trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.50 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitOpspOduTcmB OBJECT-TYPE The transmitted Operator Specific part of the TCMB trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.51 | OCTET STRING (SIZE(0..32)) | read-only | current |
| virtualPortDefTimModeOduTcmB OBJECT-TYPE TCM_B Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.52 | TimMode | read-only | current |
| virtualPortDefTraceExpectedOduTcmC OBJECT-TYPE Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.53 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitSapiOduTcmC OBJECT-TYPE The transmitted SAPI part of the TCMC trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.54 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitDapiOduTcmC OBJECT-TYPE The transmitted DAPI part of the TCMC trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.55 | OCTET STRING (SIZE(0..15)) | read-only | current |
| virtualPortDefTraceTransmitOpspOduTcmC OBJECT-TYPE The transmitted Operator Specific part of the TCMC trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.56 | OCTET STRING (SIZE(0..32)) | read-only | current |
| virtualPortDefTimModeOduTcmC OBJECT-TYPE TCM_C Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.57 | TimMode | read-only | current |
| virtualPortDefTerminationLevel OBJECT-TYPE Highest signal level hardware removes then generates for transmission. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.58 | OhTerminationLevel | read-only | current |
| virtualPortDefLoopConfig OBJECT-TYPE External or Facility Loopback | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.59 | LoopConfig | read-only | current |
| virtualPortDefVcType OBJECT-TYPE Virtual Container Group Type | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.60 | VirtualContainerType | read-only | current |
| virtualPortDefCir OBJECT-TYPE CIR (Committed Information Rate ) is used on Ethernet Interfaces with a policing function | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.61 | Unsigned32 | read-only | current |
| virtualPortDefOpuPayloadType OBJECT-TYPE OPU Payload Type Indicator | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.62 | FspR7OpuPayloadType | read-only | current |
| virtualPortDefOtnStuffing OBJECT-TYPE Indicates if bit/byte stuffing is used in the transport signal. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.63 | FspR7YesNo | read-only | current |
| virtualPortDefRedLineState OBJECT-TYPE will be set by higher level software to act as a barrier to deletion | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.64 | FspR7YesNo | read-only | current |
| virtualPortDefTunnelAid OBJECT-TYPE Tunnel AID | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.65 | SnmpAdminString | read-only | current |
| virtualPortDefOptSetDeviation OBJECT-TYPE Channel optical power delta from the port optical power set-point used for equalization (use is optional). | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.66 | Integer32 (-100..100) | read-only | current |
| virtualPortDefPayload OBJECT-TYPE The PAYLOAD defines the transport service type of the payload | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.67 | OtnPayloadType | read-only | current |
| virtualPortDefPrbsPmReset OBJECT-TYPE Reset PRBS PM counters | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.68 | FspR7PmReset | read-only | current |
| virtualPortDefTestPrbsRcvMode OBJECT-TYPE PRBS test pattern received | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.69 | FspR7RlsAction | read-only | current |
| virtualPortDefTestPrbsTrmtMode OBJECT-TYPE PRBS test pattern transmitted | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.70 | FspR7RlsAction | read-only | current |
| virtualPortDefTimDetModeOdu OBJECT-TYPE ODU Trace Identifier Mismatch (TIM) strings compared to generate TIM defect. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.71 | FspR7TimDetMode | read-only | current |
| virtualPortDefTimActionOdu OBJECT-TYPE Trace Identifier Mismatch (TIM) is reported as an alarm when detected. User selection allow traffic or AIS to be sent while the mismatch is present. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.72 | FspR7YesNo | read-only | current |
| virtualPortDefTraceExpectedDapiOdu OBJECT-TYPE Expected DAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.73 | SnmpAdminString | read-only | current |
| virtualPortDefTraceExpectedOpspOdu OBJECT-TYPE Expected OPSP part of the ODU trace (32 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.3.4.2.1.74 | SnmpAdminString | read-only | current |
| endOfVirtualPortDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.4.3 | Integer32 | read-only | current |
| lldpDefTable OBJECT-TYPE lldpDefTable | 1.3.6.1.4.1.2544.1.11.10.3.4.4 | not-accessible | current | |
| lldpDefEntry OBJECT-TYPE Entry of lldpDefTable | 1.3.6.1.4.1.2544.1.11.10.3.4.4.1 | not-accessible | current | |
| lldpDefRowStatus OBJECT-TYPE LLDP Capability RowStatus. | 1.3.6.1.4.1.2544.1.11.10.3.4.4.1.1 | RowStatus | read-only | current |
| lldpDefType OBJECT-TYPE LLDP Capability Facility Type. | 1.3.6.1.4.1.2544.1.11.10.3.4.4.1.2 | FspR7InterfaceType | read-only | current |
| lldpDefAlias OBJECT-TYPE LLDP Capability Alias. | 1.3.6.1.4.1.2544.1.11.10.3.4.4.1.3 | SnmpAdminString | read-only | current |
| lldpDefDataLayerPmReset OBJECT-TYPE Reset data-layer Performance registers | 1.3.6.1.4.1.2544.1.11.10.3.4.4.1.4 | FspR7PmReset | read-only | current |
| lldpDefAdmin OBJECT-TYPE LLDP Capability Adminstrative State. | 1.3.6.1.4.1.2544.1.11.10.3.4.4.1.5 | FspR7AdminState | read-only | current |
| lldpDefLLDPScope OBJECT-TYPE Scope of LLDP propogation based on standard group MAC Addresses | 1.3.6.1.4.1.2544.1.11.10.3.4.4.1.6 | FspR7LLDPScope | read-only | current |
| endOfLldpDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.4.5 | Integer32 | read-only | current |
| endOfFacilityMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.4.10000 | Integer32 | read-only | current |
| dcnMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.5 | |||
| linkDefTable OBJECT-TYPE linkCapTable | 1.3.6.1.4.1.2544.1.11.10.3.5.1 | not-accessible | current | |
| linkDefEntry OBJECT-TYPE Entry of linkCapTable | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1 | not-accessible | current | |
| linkDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.1 | RowStatus | read-only | current |
| linkDefType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.2 | FspR7InterfaceType | read-only | current |
| linkDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.3 | FspR7AdminState | read-only | current |
| linkDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.4 | SnmpAdminString | read-only | current |
| linkDefAuthString OBJECT-TYPE OSPF Authentication Key/String depending on Authentication Type | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.5 | SnmpAdminString | read-only | current |
| linkDefProxyArp OBJECT-TYPE If enabled then ARP requests for FENDIP (coming in on another interface in the same subnet as FENDIP) will be replied too. | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.6 | FspR7NoYes | read-only | current |
| linkDefOspf OBJECT-TYPE OSPF Routing (Dynamic) | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.7 | FspR7OspfMode | read-only | current |
| linkDefBaud OBJECT-TYPE Baud rate of the serial interface | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.8 | FspR7Baund | read-only | current |
| linkDefAuthType OBJECT-TYPE OSPF Authentication Type | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.9 | FspR7CpAuthType | read-only | current |
| linkDefIpType OBJECT-TYPE Type of IP configuration | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.10 | FspR7IpType | read-only | current |
| linkDefMetric OBJECT-TYPE Routing Metric | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.11 | Unsigned32 (0..65535) | read-only | current |
| linkDefAreaAid OBJECT-TYPE OSPF Area AID | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.12 | SnmpAdminString | read-only | current |
| linkDefNearEndIp OBJECT-TYPE IP Address assigned to PPP Termination Point on Near-End NE. Defaults to System IP address | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.13 | IpAddress | read-only | current |
| linkDefBitrate OBJECT-TYPE Maximum provisioned bit rate for PPP/IP Link of transmitter for an ECC | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.14 | Unsigned32 (1..13702) | read-only | current |
| linkDefIPv6Type OBJECT-TYPE Type of IPv6 configuration | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.15 | FspR7IPv6Type | read-only | current |
| linkDefNendIPv6 OBJECT-TYPE IPv6 Address assigned to PPP Termination Point on Near-End NE. | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.16 | SnmpAdminString | read-only | current |
| linkDefMtu OBJECT-TYPE Maximum Transmission Unit | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.17 | Unsigned32 (1280..1500) | read-only | current |
| linkDefHelloInterval OBJECT-TYPE Hello Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.18 | Unsigned32 (1..65535) | read-only | current |
| linkDefDeadInterval OBJECT-TYPE Dead Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.19 | Unsigned32 (1..65535) | read-only | current |
| linkDefRetransmitInterval OBJECT-TYPE Retransmit Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.20 | Unsigned32 (0..3600) | read-only | current |
| linkDefFarEndIp OBJECT-TYPE IP Address assigned to PPP Termination Point on Far-End NE. Default is set by NE System on LINK establishment if FENDIPACPT = Y | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.21 | IpAddress | read-only | current |
| linkDefFendLogicalIpAddr OBJECT-TYPE Far End Logical Interface IP | 1.3.6.1.4.1.2544.1.11.10.3.5.1.1.22 | IpAddress | read-only | current |
| endOfLinkDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.5.2 | Integer32 | read-only | current |
| scDefTable OBJECT-TYPE scCapTable | 1.3.6.1.4.1.2544.1.11.10.3.5.3 | not-accessible | current | |
| scDefEntry OBJECT-TYPE Entry of scCapTable | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1 | not-accessible | current | |
| scDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.1 | RowStatus | read-only | current |
| scDefType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.2 | FspR7InterfaceType | read-only | current |
| scDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.3 | FspR7AdminState | read-only | current |
| scDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.4 | SnmpAdminString | read-only | current |
| scDefAuthString OBJECT-TYPE OSPF Authentication Key/String depending on Authentication Type | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.5 | SnmpAdminString | read-only | current |
| scDefOspf OBJECT-TYPE OSPF Routing (Dynamic) | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.6 | FspR7OspfMode | read-only | current |
| scDefAuthType OBJECT-TYPE OSPF Authentication Type | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.7 | FspR7CpAuthType | read-only | current |
| scDefIpType OBJECT-TYPE Type of IP configuration | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.8 | FspR7IpType | read-only | current |
| scDefMetric OBJECT-TYPE Routing Metric | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.9 | Unsigned32 (0..65535) | read-only | current |
| scDefAreaAid OBJECT-TYPE OSPF Area AID | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.10 | SnmpAdminString | read-only | current |
| scDefAlsMode OBJECT-TYPE Determines the reaction in backward direction in response to a LOS on the same Interface: on a Network Interface connected to the DWDM this is a matter of laser safety | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.11 | FspR7AlsMode | read-only | current |
| scDefSigDegThresReceiver OBJECT-TYPE Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end. | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.12 | Unsigned32 | read-only | current |
| scDefAutonegotiation OBJECT-TYPE Auto Negotiation for the data rate | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.13 | EnableState | read-only | current |
| scDefBitrate OBJECT-TYPE Provisioned data rate | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.14 | FspR7Bitrate | read-only | current |
| scDefDuplex OBJECT-TYPE Duplex Mode (provision), available when Auto Negoiation is Disable (AUTONEG=DISABLE) | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.15 | EthDuplexMode | read-only | current |
| scDefAttGradientTh OBJECT-TYPE Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms: INTRUDE-RCV and INTRUDE-TRMT. | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.16 | Unsigned32 (5..990) | read-only | current |
| scDefIpAddr OBJECT-TYPE IP Address assigned to LAN IP Interface | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.17 | IpAddress | read-only | current |
| scDefLanAid OBJECT-TYPE AID of LAN | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.18 | SnmpAdminString | read-only | current |
| scDefIpMask OBJECT-TYPE IP MASK assigned to LAN IP Interface | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.19 | IpAddress | read-only | current |
| scDefDataLayerPmReset OBJECT-TYPE Reset data-layer Performance registers | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.20 | FspR7PmReset | read-only | current |
| scDefPriority OBJECT-TYPE Priority | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.21 | Unsigned32 (0..255) | read-only | current |
| scDefIPv6 OBJECT-TYPE IPv6 Address | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.22 | SnmpAdminString | read-only | current |
| scDefIPv6PrefixLen OBJECT-TYPE IPv6 Subnet Prefix Length | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.23 | Unsigned32 (0..128) | read-only | current |
| scDefIpMode OBJECT-TYPE IP Mode of Operation either IPv4 only or IPv4 and IPv6. When operation supports IPv6, it is used for addresses external to the network. | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.24 | FspR7IpMode | read-only | current |
| scDefGatewayProxyArp OBJECT-TYPE Gateway node serves as an ARP proxy | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.25 | FspR7EnableDisable | read-only | current |
| scDefMtu OBJECT-TYPE Maximum Transmission Unit | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.26 | Unsigned32 (1280..1500) | read-only | current |
| scDefHelloInterval OBJECT-TYPE Hello Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.27 | Unsigned32 (1..65535) | read-only | current |
| scDefDeadInterval OBJECT-TYPE Dead Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.28 | Unsigned32 (1..65535) | read-only | current |
| scDefRetransmitInterval OBJECT-TYPE Retransmit Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.29 | Unsigned32 (0..3600) | read-only | current |
| scDefDhcpServer OBJECT-TYPE Determines DHCP Server/Client mode of the NCU | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.30 | FspR7DhcpServer | read-only | current |
| scDefDhcpStartAddr OBJECT-TYPE DHCP Start Address | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.31 | IpAddress | read-only | current |
| scDefDhcpStopAddr OBJECT-TYPE DHCP Stop Address | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.32 | IpAddress | read-only | current |
| scDefDhcpMask OBJECT-TYPE DHCP Mask | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.33 | IpAddress | read-only | current |
| scDefFrcdLogin OBJECT-TYPE Directs web browser to the NED login page when enabled and user is not currently logged in. | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.34 | FspR7EnableDisable | read-only | current |
| scDefMdix OBJECT-TYPE Medium-dependent interface crossover | 1.3.6.1.4.1.2544.1.11.10.3.5.3.1.35 | FspR7InterfaceCrossover | read-only | current |
| endOfScDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.5.4 | Integer32 | read-only | current |
| lanDefTable OBJECT-TYPE lanCapTable | 1.3.6.1.4.1.2544.1.11.10.3.5.5 | not-accessible | current | |
| lanDefEntry OBJECT-TYPE Entry of lanCapTable | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1 | not-accessible | current | |
| lanDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.1 | RowStatus | read-only | current |
| lanDefType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.2 | FspR7InterfaceType | read-only | current |
| lanDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.3 | FspR7AdminState | read-only | current |
| lanDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.4 | SnmpAdminString | read-only | current |
| lanDefAuthString OBJECT-TYPE OSPF Authentication Key/String depending on Authentication Type | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.5 | SnmpAdminString | read-only | current |
| lanDefOspf OBJECT-TYPE OSPF Routing (Dynamic) | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.6 | FspR7OspfMode | read-only | current |
| lanDefAuthType OBJECT-TYPE OSPF Authentication Type | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.7 | FspR7CpAuthType | read-only | current |
| lanDefIpType OBJECT-TYPE Type of IP configuration | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.8 | FspR7IpType | read-only | current |
| lanDefMetric OBJECT-TYPE Routing Metric | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.9 | Unsigned32 (0..65535) | read-only | current |
| lanDefAreaAid OBJECT-TYPE OSPF Area AID | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.10 | SnmpAdminString | read-only | current |
| lanDefIpAddr OBJECT-TYPE IP Address assigned to LAN IP Interface | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.11 | IpAddress | read-only | current |
| lanDefIpMask OBJECT-TYPE IP MASK assigned to LAN IP Interface | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.12 | IpAddress | read-only | current |
| lanDefPriority OBJECT-TYPE Priority | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.13 | Unsigned32 (0..255) | read-only | current |
| lanDefIPv6 OBJECT-TYPE IPv6 Address | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.14 | SnmpAdminString | read-only | current |
| lanDefIPv6PrefixLen OBJECT-TYPE IPv6 Subnet Prefix Length | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.15 | Unsigned32 (0..128) | read-only | current |
| lanDefIpMode OBJECT-TYPE IP Mode of Operation either IPv4 only or IPv4 and IPv6. When operation supports IPv6, it is used for addresses external to the network. | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.16 | FspR7IpMode | read-only | current |
| lanDefMtu OBJECT-TYPE Maximum Transmission Unit | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.17 | Unsigned32 (1280..1500) | read-only | current |
| lanDefHelloInterval OBJECT-TYPE Hello Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.18 | Unsigned32 (1..65535) | read-only | current |
| lanDefDeadInterval OBJECT-TYPE Dead Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.19 | Unsigned32 (1..65535) | read-only | current |
| lanDefRetransmitInterval OBJECT-TYPE Retransmit Interval | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.20 | Unsigned32 (0..3600) | read-only | current |
| lanDefDhcpServer OBJECT-TYPE Determines DHCP Server/Client mode of the NCU | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.21 | FspR7DhcpServer | read-only | current |
| lanDefDhcpStartAddr OBJECT-TYPE DHCP Start Address | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.22 | IpAddress | read-only | current |
| lanDefDhcpStopAddr OBJECT-TYPE DHCP Stop Address | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.23 | IpAddress | read-only | current |
| lanDefDhcpMask OBJECT-TYPE DHCP Mask | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.24 | IpAddress | read-only | current |
| lanDefFrcdLogin OBJECT-TYPE Directs web browser to the NED login page when enabled and user is not currently logged in. | 1.3.6.1.4.1.2544.1.11.10.3.5.5.1.25 | FspR7EnableDisable | read-only | current |
| endOfLanDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.5.6 | Integer32 | read-only | current |
| eccDefTable OBJECT-TYPE eccCapTable (Embedded Communication Channel) | 1.3.6.1.4.1.2544.1.11.10.3.5.7 | not-accessible | current | |
| eccDefEntry OBJECT-TYPE Entry of eccCapTable | 1.3.6.1.4.1.2544.1.11.10.3.5.7.1 | not-accessible | current | |
| eccDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.5.7.1.1 | RowStatus | read-only | current |
| eccDefType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.3.5.7.1.2 | FspR7InterfaceType | read-only | current |
| eccDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.5.7.1.3 | FspR7AdminState | read-only | current |
| eccDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.5.7.1.4 | SnmpAdminString | read-only | current |
| eccDefLanAid OBJECT-TYPE AID of LAN | 1.3.6.1.4.1.2544.1.11.10.3.5.7.1.5 | SnmpAdminString | read-only | current |
| eccDefExternalVid OBJECT-TYPE External VID | 1.3.6.1.4.1.2544.1.11.10.3.5.7.1.6 | Unsigned32 (1..4095) | read-only | current |
| eccDefGccUsage OBJECT-TYPE GCC Usage | 1.3.6.1.4.1.2544.1.11.10.3.5.7.1.7 | FspR7GccUsage | read-only | current |
| endOfEccDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.5.8 | Integer32 | read-only | current |
| endOfDcnMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.5.10000 | Integer32 | read-only | current |
| opticalMuxMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.6 | |||
| opticalMuxDefTable OBJECT-TYPE opticalCapTable | 1.3.6.1.4.1.2544.1.11.10.3.6.1 | not-accessible | current | |
| opticalMuxDefEntry OBJECT-TYPE Entry of opticalCapTable | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1 | not-accessible | current | |
| opticalMuxDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.1 | RowStatus | read-only | current |
| opticalMuxDefPumpPower OBJECT-TYPE Total raman pump power | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.2 | Integer32 (115..138) | read-only | current |
| opticalMuxDefInhibitSwitchToWork OBJECT-TYPE Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch switch to the Protection facility (protection path).Inhibit Switch to Protection facility. Inhibition blocks switch to the Protection facility (protection path). to the Working facility (working path). to the Working facility (working path). Applicable only for the Working facility in ACT state. Applicable only for the Working facility in ACT state. Applicable for the Protection facility in ACT state. Applicable for the Protection facility in ACT state. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.3 | FspR7YesNo | read-only | current |
| opticalMuxDefForceLaserOn OBJECT-TYPE Laser Forced On | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.4 | FspR7RlsAction | read-only | current |
| opticalMuxDefAseTabCreation OBJECT-TYPE ASE Table creation in process | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.5 | FspR7RlsAction | read-only | current |
| opticalMuxDefOpticalSetPoint OBJECT-TYPE Sets the optical power for power equalization in ROADM or for channel power control in OPCM | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.6 | Integer32 (-250..100) | read-only | current |
| opticalMuxDefInitiateEqualization OBJECT-TYPE Initiate Equalization | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.7 | FspR7RlsAction | read-only | current |
| opticalMuxDefTilt OBJECT-TYPE Change of optical channel power in dB over the complete transmission band | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.8 | Integer32 (-50..0) | read-only | current |
| opticalMuxDefOscOpticalSetpoint OBJECT-TYPE Sets the OSC optical power | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.9 | Integer32 (-250..50) | read-only | current |
| opticalMuxDefOffset OBJECT-TYPE Sets the offset for the mean optical power for power equalization in ROADM | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.10 | Integer32 (10..30) | read-only | current |
| opticalMuxDefSwitchCommand OBJECT-TYPE The switch command action for this facility. A command resulting in a switch event will also cause a change of the facility secondary state and a corresponding condition. Addressed by this command is the active port, the port to switch away from. Since this is a manual switch command, it will not switch if other port suffers from a signalfailure or a signal degrade. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.11 | FspR7APSCommand | read-only | current |
| opticalMuxDefAlsMode OBJECT-TYPE Determines the reaction in backward direction in response to a LOS on the same Interface: on a Network Interface connected to the DWDM this is a matter of laser safety | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.12 | FspR7AlsMode | read-only | current |
| opticalMuxDefType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.13 | FspR7InterfaceType | read-only | current |
| opticalMuxDefAttenuationGradient OBJECT-TYPE Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms: INTRUDE-RCV and INTRUDE-TRMT. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.14 | Unsigned32 (5..990) | read-only | current |
| opticalMuxDefInhibitSwitchToProt OBJECT-TYPE Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.15 | FspR7YesNo | read-only | current |
| opticalMuxDefVariableGain OBJECT-TYPE Variable Gain of EDFA | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.16 | Unsigned32 (0..350) | read-only | current |
| opticalMuxDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.17 | FspR7AdminState | read-only | current |
| opticalMuxDefTimePeriod OBJECT-TYPE NONE - OTDR measurement disabled otherwise the OTDR duration in minutes. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.18 | FspR7OtdrPeriod | read-only | current |
| opticalMuxDefSigDegThresReceiver OBJECT-TYPE Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.19 | Unsigned32 | read-only | current |
| opticalMuxDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.20 | SnmpAdminString | read-only | current |
| opticalMuxDefDataLayerPmReset OBJECT-TYPE Reset data-layer Performance registers | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.21 | FspR7PmReset | read-only | current |
| opticalMuxDefGain OBJECT-TYPE Gain | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.22 | FspR7Gain | read-only | current |
| opticalMuxDefEdfaPwrOut OBJECT-TYPE Optical Output Power Rating - Provision | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.23 | FspR7EdfaOutputPowerRating | read-only | current |
| opticalMuxDefVoaSetpoint OBJECT-TYPE Sets the optical attenuation of VOA | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.24 | Unsigned32 (0..300) | read-only | current |
| opticalMuxDefFiberBrand OBJECT-TYPE Brand of fiber present in the fiber plant | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.25 | FspR7FiberBrand | read-only | current |
| opticalMuxDefTiltSet OBJECT-TYPE Tilt setting as discrete values versus a range | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.26 | FspR7TiltSet | read-only | current |
| opticalMuxDefForceFwdAsePilotOn OBJECT-TYPE Force the BWD Raman pilot on to allow building of FWD Raman ASE Table | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.27 | FspR7RlsAction | read-only | current |
| opticalMuxDefBandProvision OBJECT-TYPE Band Provision. Reference to BAND__INVENTORY. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.28 | FspR7OpticalBand | read-only | current |
| opticalMuxDefOffsetHigh OBJECT-TYPE Sets the high level offset for power equalization in CCM | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.29 | Integer32 (-250..210) | read-only | current |
| opticalMuxDefOffsetLow OBJECT-TYPE Sets the low level offset for power equalization in CCM | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.30 | Integer32 (-250..210) | read-only | current |
| opticalMuxDefOptUpdate OBJECT-TYPE This parameter is used to operate/trigger OPT PM update; it triggers the entity to update its current OPT PM value, which can be retrieved via GET function. | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.31 | FspR7RlsAction | read-only | current |
| opticalMuxDefVariableGainNtoR OBJECT-TYPE Variable Gain of EDFA (N to R) | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.32 | Unsigned32 (0..350) | read-only | current |
| opticalMuxDefVariableGainRtoN OBJECT-TYPE Variable Gain of EDFA (R to N) | 1.3.6.1.4.1.2544.1.11.10.3.6.1.1.33 | Unsigned32 (0..350) | read-only | current |
| endOfOpticalMuxDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.6.2 | Integer32 | read-only | current |
| endOfOpticalMuxMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.6.10000 | Integer32 | read-only | current |
| shelfConnMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.7 | |||
| shelfConnDefTable OBJECT-TYPE shelfConnCapTable | 1.3.6.1.4.1.2544.1.11.10.3.7.1 | not-accessible | current | |
| shelfConnDefEntry OBJECT-TYPE Entry of shelfConnCapTable | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1 | not-accessible | current | |
| shelfConnDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.1 | RowStatus | read-only | current |
| shelfConnDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.2 | FspR7AdminState | read-only | current |
| shelfConnDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.3 | SnmpAdminString | read-only | current |
| shelfConnDefFacilityType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.4 | FspR7InterfaceType | read-only | current |
| shelfConnDefDataLayerPmReset OBJECT-TYPE Reset data-layer Performance registers | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.5 | FspR7PmReset | read-only | current |
| shelfConnDefAutonegotiation OBJECT-TYPE Auto Negotiation for the data rate | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.6 | EnableState | read-only | current |
| shelfConnDefBitrate OBJECT-TYPE Provisioned data rate | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.7 | FspR7Bitrate | read-only | current |
| shelfConnDefDuplex OBJECT-TYPE Duplex Mode (provision), available when Auto Negoiation is Disable (AUTONEG=DISABLE) | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.8 | EthDuplexMode | read-only | current |
| shelfConnDefMdix OBJECT-TYPE Medium-dependent interface crossover | 1.3.6.1.4.1.2544.1.11.10.3.7.1.1.9 | FspR7InterfaceCrossover | read-only | current |
| endOfShelfConnDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.7.2 | Integer32 | read-only | current |
| endOfShelfConnMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.7.10000 | Integer32 | read-only | current |
| envMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.8 | |||
| envPortDefTable OBJECT-TYPE envPortCapTable | 1.3.6.1.4.1.2544.1.11.10.3.8.1 | not-accessible | current | |
| envPortDefEntry OBJECT-TYPE Entry of envPortCapTable | 1.3.6.1.4.1.2544.1.11.10.3.8.1.1 | not-accessible | current | |
| envPortDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.8.1.1.1 | RowStatus | read-only | current |
| envPortDefTelemetry OBJECT-TYPE Telemetry interface output provision | 1.3.6.1.4.1.2544.1.11.10.3.8.1.1.2 | FspR7TelemetryOutput | read-only | current |
| envPortDefFacilityType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.3.8.1.1.3 | FspR7InterfaceType | read-only | current |
| envPortDefTifAlarmType OBJECT-TYPE Telemetry interface alarm type | 1.3.6.1.4.1.2544.1.11.10.3.8.1.1.4 | SnmpAdminString | read-only | current |
| envPortDefTifAlarmMessage OBJECT-TYPE Telemetry interface alarm message | 1.3.6.1.4.1.2544.1.11.10.3.8.1.1.5 | SnmpAdminString | read-only | current |
| envPortDefInvertTifInputLogic OBJECT-TYPE Change telemetry interface input logic | 1.3.6.1.4.1.2544.1.11.10.3.8.1.1.6 | FspR7InvertTelemetryInputLogic | read-only | current |
| endOfEnvPortDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.8.2 | Integer32 | read-only | current |
| endOfEnvMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.8.10000 | Integer32 | read-only | current |
| containerMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.9 | |||
| containerDefTable OBJECT-TYPE containerCapTable | 1.3.6.1.4.1.2544.1.11.10.3.9.1 | not-accessible | current | |
| containerDefEntry OBJECT-TYPE Entry of containerCapTable | 1.3.6.1.4.1.2544.1.11.10.3.9.1.1 | not-accessible | current | |
| containerDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.9.1.1.1 | RowStatus | read-only | current |
| containerDefFacilityType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.3.9.1.1.2 | FspR7InterfaceType | read-only | current |
| endOfContainerDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.9.2 | Integer32 | read-only | current |
| endOfContainerMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.9.10000 | Integer32 | read-only | current |
| opticalLineMgmtDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.3.10 | |||
| opticalLineDefTable OBJECT-TYPE opticalLineCapTable | 1.3.6.1.4.1.2544.1.11.10.3.10.1 | not-accessible | current | |
| opticalLineDefEntry OBJECT-TYPE Entry of opticalLineCapTable | 1.3.6.1.4.1.2544.1.11.10.3.10.1.1 | not-accessible | current | |
| opticalLineDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.3.10.1.1.1 | RowStatus | read-only | current |
| opticalLineDefTxLineAttenuation OBJECT-TYPE The Attenuation (in 0.1 dB) on line connected to transmitter of this interface. If there is loss of signal then line attenuation is -65535. The value -255 will be returned if the value isn't available. | 1.3.6.1.4.1.2544.1.11.10.3.10.1.1.2 | Integer32 | read-only | current |
| opticalLineDefRxLineAttenuation OBJECT-TYPE The Attenuation (in 0.1 dB) on line connected to receiver of this interface. If there is loss of signal then ine attenuation is -65535. The value -255 will be returned if the value isn't available. | 1.3.6.1.4.1.2544.1.11.10.3.10.1.1.3 | Integer32 | read-only | current |
| opticalLineDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.3.10.1.1.4 | SnmpAdminString | read-only | current |
| opticalLineDefFarEndLocation OBJECT-TYPE FEND Location | 1.3.6.1.4.1.2544.1.11.10.3.10.1.1.5 | SnmpAdminString | read-only | current |
| opticalLineDefFiberLength OBJECT-TYPE Fiber length between 2 remote NEs | 1.3.6.1.4.1.2544.1.11.10.3.10.1.1.6 | Unsigned32 (0..10000) | read-only | current |
| opticalLineDefChannelBandwith OBJECT-TYPE Channel Bandwidth | 1.3.6.1.4.1.2544.1.11.10.3.10.1.1.7 | FspR7ChannelBandwidth | read-only | current |
| endOfOpticalLineDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.10.2 | Integer32 | read-only | current |
| endOfOpticalLineMgmtDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.3.10.10000 | Integer32 | read-only | current |
| performanceDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.6 | |||
| performanceFacilityDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.6.4 | |||
| performanceFacilityThresholdDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.6.4.1 | |||
| optThresholdConfigDefTable OBJECT-TYPE optThresholdConfigCapTable | 1.3.6.1.4.1.2544.1.11.10.6.4.1.1 | not-accessible | current | |
| optThresholdConfigDefEntry OBJECT-TYPE Entry of optThresholdConfigCapTable | 1.3.6.1.4.1.2544.1.11.10.6.4.1.1.1 | not-accessible | current | |
| optThresholdConfigDefLowConfig OBJECT-TYPE Configurable threshold of the Optical Power Transmitted (output) | 1.3.6.1.4.1.2544.1.11.10.6.4.1.1.1.1 | Integer32 (-500..300) | read-only | current |
| optThresholdConfigDefHighConfig OBJECT-TYPE Configurable high threshold of the Optical Power Transmitted (output) | 1.3.6.1.4.1.2544.1.11.10.6.4.1.1.1.2 | Integer32 (-500..300) | read-only | current |
| oprThresholdConfigDefTable OBJECT-TYPE oprThresholdConfigCapTable | 1.3.6.1.4.1.2544.1.11.10.6.4.1.2 | not-accessible | current | |
| oprThresholdConfigDefEntry OBJECT-TYPE Entry of oprThresholdConfigCapTable | 1.3.6.1.4.1.2544.1.11.10.6.4.1.2.1 | not-accessible | current | |
| oprThresholdConfigDefLowConfig OBJECT-TYPE Optical Input Power Received | 1.3.6.1.4.1.2544.1.11.10.6.4.1.2.1.1 | Integer32 (-450..260) | read-only | current |
| oprThresholdConfigDefHighConfig OBJECT-TYPE Optical Input Power Received | 1.3.6.1.4.1.2544.1.11.10.6.4.1.2.1.2 | Integer32 (-450..270) | read-only | current |
| endOfOprThresholdConfigDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.6.4.1.3 | Integer32 | read-only | current |
| endOfPerformanceFacilityThresholdDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.6.4.1.10000 | Integer32 | read-only | current |
| featureSpecificDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.7 | |||
| fiberMapDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.7.1 | |||
| terminationPointDefTable OBJECT-TYPE terminationPointCapTable | 1.3.6.1.4.1.2544.1.11.10.7.1.1 | not-accessible | current | |
| terminationPointDefEntry OBJECT-TYPE Entry of terminationPointCapTable | 1.3.6.1.4.1.2544.1.11.10.7.1.1.1 | not-accessible | current | |
| terminationPointDefRowStatus OBJECT-TYPE Physical Termination Point Capability RowStatus. | 1.3.6.1.4.1.2544.1.11.10.7.1.1.1.1 | RowStatus | read-only | current |
| terminationPointDefAdmin OBJECT-TYPE Physical Termination Point Capability Adminstrative State. | 1.3.6.1.4.1.2544.1.11.10.7.1.1.1.2 | FspR7AdminState | read-only | current |
| terminationPointDefFiberDetect OBJECT-TYPE Physical Termination Point Capability Fiber Detect. | 1.3.6.1.4.1.2544.1.11.10.7.1.1.1.3 | FspR7EnableDisable | read-only | current |
| terminationPointDefAlias OBJECT-TYPE Physical Termination Point Capabillity Alias. | 1.3.6.1.4.1.2544.1.11.10.7.1.1.1.4 | SnmpAdminString | read-only | current |
| connectionDefTable OBJECT-TYPE connectionCapTable | 1.3.6.1.4.1.2544.1.11.10.7.1.2 | not-accessible | current | |
| connectionDefEntry OBJECT-TYPE Entry of connectionCapTable | 1.3.6.1.4.1.2544.1.11.10.7.1.2.1 | not-accessible | current | |
| connectionDefRowStatus OBJECT-TYPE Physical Connection Default RowStatus. | 1.3.6.1.4.1.2544.1.11.10.7.1.2.1.1 | FspR7RowStatus | read-only | current |
| connectionDefType OBJECT-TYPE Physical Connection Default Type. | 1.3.6.1.4.1.2544.1.11.10.7.1.2.1.2 | FspR7TypeConnection | read-only | current |
| endOfConnectionDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.1.3 | Integer32 | read-only | current |
| endOfFiberMapDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.1.10000 | Integer32 | read-only | current |
| eciDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.7.3 | |||
| externalPortDefTable OBJECT-TYPE externalPortDef | 1.3.6.1.4.1.2544.1.11.10.7.3.1 | not-accessible | current | |
| externalPortDefEntry OBJECT-TYPE Entry of externalPortDef | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1 | not-accessible | current | |
| externalPortDefRowStatus OBJECT-TYPE RowStatus | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.1 | FspR7RowStatus | read-only | current |
| externalPortDefType OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.2 | FspR7InterfaceType | read-only | current |
| externalPortDefTransmitChannel OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.3 | FspR7ChannelIdentifier | read-only | current |
| externalPortDefChannelBandwith OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.4 | FspR7ChannelBandwidth | read-only | current |
| externalPortDefAlias OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.5 | SnmpAdminString | read-only | current |
| externalPortDefFarEndLocation OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.6 | SnmpAdminString | read-only | current |
| externalPortDefBitrate OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.7 | Unsigned32 | read-only | current |
| externalPortDefFecType OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.8 | FspR7FecType | read-only | current |
| externalPortDefLineCoding OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.9 | FspR7LineCoding | read-only | current |
| externalPortDefFrameFormat OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.10 | FspR7FrameFormat | read-only | current |
| externalPortDefOpticalPowerTx OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.11 | Integer32 (-9900..600) | read-only | current |
| externalPortDefOsnrTransmit OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.12 | Unsigned32 (0..58) | read-only | current |
| externalPortDefPmdTransmit OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.13 | Unsigned32 (0..30) | read-only | current |
| externalPortDefChromDisperTx OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.14 | Integer32 (-60000..60000) | read-only | current |
| externalPortDefMinOsnrRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.15 | Unsigned32 (10..58) | read-only | current |
| externalPortDefMinOptPowerRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.16 | Integer32 (-2500..1000) | read-only | current |
| externalPortDefMaxOptPowerRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.17 | Integer32 (-2500..1000) | read-only | current |
| externalPortDefMaxPmdRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.18 | Unsigned32 (0..30) | read-only | current |
| externalPortDefMinChromDisperRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.19 | Integer32 (-60000..60000) | read-only | current |
| externalPortDefMaxChromDisperRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.20 | Integer32 (-60000..60000) | read-only | current |
| externalPortDefMaxBitErrorRate OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.21 | FspR7MaxBitErrorRate | read-only | current |
| externalPortDefSourceProfile OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.1.1.22 | SnmpAdminString | read-only | current |
| endOfExternalPortDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.3.2 | Integer32 | read-only | current |
| externalOmDefTable OBJECT-TYPE externalOmDef | 1.3.6.1.4.1.2544.1.11.10.7.3.3 | not-accessible | current | |
| externalOmDefEntry OBJECT-TYPE Entry of externalOmDef | 1.3.6.1.4.1.2544.1.11.10.7.3.3.1 | not-accessible | current | |
| externalOmDefRowStatus OBJECT-TYPE RowStatus | 1.3.6.1.4.1.2544.1.11.10.7.3.3.1.1 | FspR7RowStatus | read-only | current |
| externalOmDefType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.7.3.3.1.2 | FspR7InterfaceType | read-only | current |
| externalOmDefHostName OBJECT-TYPE Host Device Name | 1.3.6.1.4.1.2544.1.11.10.7.3.3.1.3 | SnmpAdminString | read-only | current |
| externalVchDefTable OBJECT-TYPE externalVchDef | 1.3.6.1.4.1.2544.1.11.10.7.3.5 | not-accessible | current | |
| externalVchDefEntry OBJECT-TYPE Entry of externalVchDef | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1 | not-accessible | current | |
| externalVchDefRowStatus OBJECT-TYPE RowStatus | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.1 | FspR7RowStatus | read-only | current |
| externalVchDefType OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.2 | FspR7InterfaceType | read-only | current |
| externalVchDefTransmitChannel OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.3 | FspR7ChannelIdentifier | read-only | current |
| externalVchDefChannelBandwith OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.4 | FspR7ChannelBandwidth | read-only | current |
| externalVchDefAlias OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.5 | SnmpAdminString | read-only | current |
| externalVchDefFarEndLocation OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.6 | SnmpAdminString | read-only | current |
| externalVchDefBitrate OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.7 | Unsigned32 | read-only | current |
| externalVchDefFecType OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.8 | FspR7FecType | read-only | current |
| externalVchDefLineCoding OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.9 | FspR7LineCoding | read-only | current |
| externalVchDefFrameFormat OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.10 | FspR7FrameFormat | read-only | current |
| externalVchDefOpticalPowerTx OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.11 | Integer32 (-9900..600) | read-only | current |
| externalVchDefOsnrTransmit OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.12 | Unsigned32 (0..58) | read-only | current |
| externalVchDefPmdTransmit OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.13 | Unsigned32 (0..30) | read-only | current |
| externalVchDefChromDisperTx OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.14 | Integer32 (-60000..60000) | read-only | current |
| externalVchDefMinOsnrRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.15 | Unsigned32 (10..58) | read-only | current |
| externalVchDefMinOptPowerRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.16 | Integer32 (-2500..1000) | read-only | current |
| externalVchDefMaxOptPowerRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.17 | Integer32 (-2500..1000) | read-only | current |
| externalVchDefMaxPmdRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.18 | Unsigned32 (0..30) | read-only | current |
| externalVchDefMinChromDisperRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.19 | Integer32 (-60000..60000) | read-only | current |
| externalVchDefMaxChromDisperRcv OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.20 | Integer32 (-60000..60000) | read-only | current |
| externalVchDefMaxBitErrorRate OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.21 | FspR7MaxBitErrorRate | read-only | current |
| externalVchDefSourceProfile OBJECT-TYPE . | 1.3.6.1.4.1.2544.1.11.10.7.3.5.1.22 | SnmpAdminString | read-only | current |
| endOfEciDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.3.10000 | Integer32 | read-only | current |
| changeServiceDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.7.5 | |||
| changePhysicalPortServiceDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.5.1 | not-accessible | current | |
| changePhysicalPortServiceDefEntry OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1 | not-accessible | current | |
| changePhysicalPortServiceDefRowStatus OBJECT-TYPE RowStatus object is used to create or delete a row in the table. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.1 | RowStatus | read-only | current |
| changePhysicalPortServiceDefType OBJECT-TYPE The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.2 | FspR7InterfaceType | read-only | current |
| changePhysicalPortServiceDefAdmin OBJECT-TYPE Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.3 | FspR7AdminState | read-only | current |
| changePhysicalPortServiceDefAlias OBJECT-TYPE User Applied Descriptor | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.4 | SnmpAdminString | read-only | current |
| changePhysicalPortServiceDefAlsMode OBJECT-TYPE Determines the reaction in backward direction in response to a LOS on the same Interface: on a Network Interface connected to the DWDM this is a matter of laser safety | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.5 | FspR7AlsMode | read-only | current |
| changePhysicalPortServiceDefBehaviour OBJECT-TYPE Behavior or Port usage based on configuration/usage in the system regardless of faceplate designation | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.6 | FspR7PortBehaviour | read-only | current |
| changePhysicalPortServiceDefDispersionSetting OBJECT-TYPE Chromatic Dispersion Compensation setting on module | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.7 | Integer32 (-50000..50000) | read-only | current |
| changePhysicalPortServiceDefDispersionMode OBJECT-TYPE Chromatic Dispersion Compensation Mode | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.8 | FspR7DispersionModes | read-only | current |
| changePhysicalPortServiceDefChannelProv OBJECT-TYPE Channel | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.9 | FspR7ChannelIdentifier | read-only | current |
| changePhysicalPortServiceDefWdmRxChannel OBJECT-TYPE Channel Number for the Receive Interface | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.10 | FspR7ChannelIdentifier | read-only | current |
| changePhysicalPortServiceDefCodeGain OBJECT-TYPE Forward Error Correction Coding gain | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.11 | FspR7CodeGain | read-only | current |
| changePhysicalPortServiceDefXfpDecisionThres OBJECT-TYPE XFP Decision threshold setting | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.12 | FspR7XfpDecisionThres | read-only | current |
| changePhysicalPortServiceDefDisparityCorrection OBJECT-TYPE Disparity correction | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.13 | EnableState | read-only | current |
| changePhysicalPortServiceDefEqlzAdmin OBJECT-TYPE Scheduled Equalization Administration | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.14 | FspR7EnableDisable | read-only | current |
| changePhysicalPortServiceDefErrorForwarding OBJECT-TYPE Determines the reaction in forward direction in response to a LOS on the interface on the opposite side of the module: may override this behaviour in the interests of laser safety. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.15 | FspR7ErrorFwdMode | read-only | current |
| changePhysicalPortServiceDefFecType OBJECT-TYPE Forward Error Correction (Only relevant where TYPE = OTU#) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.16 | FspR7FecType | read-only | current |
| changePhysicalPortServiceDefFarEndCommunication OBJECT-TYPE Used for Optojack plugs; Communication to Far End Plug is observed | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.17 | FspR7YesNo | read-only | current |
| changePhysicalPortServiceDefFlowControl OBJECT-TYPE Flow Control mechanism | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.18 | FspR7FlowControlMode | read-only | current |
| changePhysicalPortServiceDefLaneChannelSetting OBJECT-TYPE Lane Channel Setting | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.19 | FspR7ChannelIdentifier | read-only | current |
| changePhysicalPortServiceDefLaserDelayTimer OBJECT-TYPE Relevant only when ERRFWD=LSROFF. Enables/disables the possibility to delay turning off and on the laser. This applies to the case when turning off the laser is done as an error forwarding mechanism. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.20 | FspR7LaserDelayTimer | read-only | current |
| changePhysicalPortServiceDefLaserOffTimer OBJECT-TYPE Delay before laser is swiched off | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.21 | Unsigned32 (1..1000) | read-only | current |
| changePhysicalPortServiceDefLaserOnTimer OBJECT-TYPE Delay before laser is switched on | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.22 | Unsigned32 (1..1000) | read-only | current |
| changePhysicalPortServiceDefLaserOffDelayFunction OBJECT-TYPE A configuration request for the Laser Off Delay function. This function delays turning off the laser as a consequent action to a defect. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.23 | EnableState | read-only | current |
| changePhysicalPortServiceDefAutoPTassignment OBJECT-TYPE Auto assignment of ODU PT | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.24 | FspR7ManualAuto | read-only | current |
| changePhysicalPortServiceDefTributarySlotMethod OBJECT-TYPE Tributary Slot assignment method | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.25 | FspR7ManualAuto | read-only | current |
| changePhysicalPortServiceDefOpticalSetPoint OBJECT-TYPE Sets the optical power for power equalization in ROADM or for channel power control in OPCM | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.26 | Integer32 (-250..100) | read-only | current |
| changePhysicalPortServiceDefOpuPayloadType OBJECT-TYPE OPU Payload Type Indicator | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.27 | FspR7OpuPayloadType | read-only | current |
| changePhysicalPortServiceDefSigDegThresSonetLine OBJECT-TYPE Bit-Error-Based Degradation Definition for SONET (standard integration period) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.28 | FspR7BERThreshold | read-only | current |
| changePhysicalPortServiceDefSigDegThresSdhMs OBJECT-TYPE Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-RS). | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.29 | Unsigned32 (1..100) | read-only | current |
| changePhysicalPortServiceDefSigDegThresOtu OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for OTU | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.30 | Integer32 (1..100) | read-only | current |
| changePhysicalPortServiceDefSigDegThresOdu OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for ODU | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.31 | Integer32 (1..100) | read-only | current |
| changePhysicalPortServiceDefSigDegThreshold OBJECT-TYPE Threshold for number of errors (CV or CV+DE) in one second | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.32 | Unsigned32 (1..10000) | read-only | current |
| changePhysicalPortServiceDefSigDegPcslThreshold OBJECT-TYPE Block-Error-Based Degradation Definition for Physical Coding Sublayer | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.33 | Unsigned32 (1..100) | read-only | current |
| changePhysicalPortServiceDefSigDegThresSonetSection OBJECT-TYPE Bit-Error-Based Degradation Definition for SONET (standard integration period) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.34 | FspR7BERThreshold | read-only | current |
| changePhysicalPortServiceDefSigDegThresSdhSection OBJECT-TYPE Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-RS). | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.35 | Unsigned32 (1..100) | read-only | current |
| changePhysicalPortServiceDefSigDegThresOduTcmA OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-A | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.36 | Integer32 (1..100) | read-only | current |
| changePhysicalPortServiceDefSigDegThresOduTcmB OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-B | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.37 | Integer32 (1..100) | read-only | current |
| changePhysicalPortServiceDefSigDegThresOduTcmC OBJECT-TYPE Background-Block-Error-Based Signal Degradation Definition for TCM-C | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.38 | Integer32 (1..100) | read-only | current |
| changePhysicalPortServiceDefSignalDegradePeriod OBJECT-TYPE The measurement period in seconds used together with the deployProvIfSigDegThresSdhRegSect based on the block error counting method. The valid range is 2..10, The default being 7. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.39 | Unsigned32 (2..10) | read-only | current |
| changePhysicalPortServiceDefSigDegPeriodOdu OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.40 | Unsigned32 (2..10) | read-only | current |
| changePhysicalPortServiceDefSigDegPeriodOtu OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.41 | Unsigned32 (2..10) | read-only | current |
| changePhysicalPortServiceDefSigDegPeriodIntegration OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.42 | Unsigned32 (1..10) | read-only | current |
| changePhysicalPortServiceDefSigDegPeriodSdhSection OBJECT-TYPE Provisionable Signal Degrade Integration Period for SDH | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.43 | Unsigned32 (2..10) | read-only | current |
| changePhysicalPortServiceDefSigDegPeriodOduTcmA OBJECT-TYPE Integration Period for Signal degrade | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.44 | Unsigned32 (2..10) | read-only | current |
| changePhysicalPortServiceDefSigDegPeriodOduTcmB OBJECT-TYPE Integration Period of TCMB Signal Segrade | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.45 | Unsigned32 (2..10) | read-only | current |
| changePhysicalPortServiceDefSigDegPeriodOduTcmC OBJECT-TYPE Integration Period of TCMC Signal Segrade | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.46 | Unsigned32 (2..10) | read-only | current |
| changePhysicalPortServiceDefOtnStuffing OBJECT-TYPE Indicates if bit/byte stuffing is used in the transport signal. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.47 | FspR7YesNo | read-only | current |
| changePhysicalPortServiceDefTcmALevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance A | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.48 | OtnTcmLevel | read-only | current |
| changePhysicalPortServiceDefTcmBLevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance B | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.49 | OtnTcmLevel | read-only | current |
| changePhysicalPortServiceDefTcmCLevel OBJECT-TYPE Activation of Tandem Connection Monitoring Instance C | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.50 | OtnTcmLevel | read-only | current |
| changePhysicalPortServiceDefTerminationLevel OBJECT-TYPE Highest signal level hardware removes then generates for transmission. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.51 | OhTerminationLevel | read-only | current |
| changePhysicalPortServiceDefTimingSource OBJECT-TYPE The timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation). - loopTiming: e.g. used in point-to-point via SONET network and feeder topologies. The default is internal(1). | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.52 | SonetTimingSource | read-only | current |
| changePhysicalPortServiceDefTimModeOdu OBJECT-TYPE Detection of TIM-ODU Condition can be configured | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.53 | TimMode | read-only | current |
| changePhysicalPortServiceDefTimModeOtu OBJECT-TYPE OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.54 | TimMode | read-only | current |
| changePhysicalPortServiceDefTimModeSonetSection OBJECT-TYPE SONET Section Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.55 | TimMode | read-only | current |
| changePhysicalPortServiceDefTimModeOduTcmA OBJECT-TYPE TCM_A Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.56 | TimMode | read-only | current |
| changePhysicalPortServiceDefTimModeOduTcmB OBJECT-TYPE TCM_B Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.57 | TimMode | read-only | current |
| changePhysicalPortServiceDefTimModeOduTcmC OBJECT-TYPE TCM_C Trace Identifier Mismatch (TIM) detection/action for TIM defect. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.58 | TimMode | read-only | current |
| changePhysicalPortServiceDefTraceFormSonetSection OBJECT-TYPE Byte-Length of Trace Compared to Expected | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.59 | SonetTraceForm | read-only | current |
| changePhysicalPortServiceDefTraceExpectedSonetSection OBJECT-TYPE Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.60 | OCTET STRING (SIZE(0..62)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitSonetSection OBJECT-TYPE Sec/RS Trace to be Transmitted | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.61 | OCTET STRING (SIZE(0..62)) | read-only | current |
| changePhysicalPortServiceDefTraceExpectedOtu OBJECT-TYPE Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.62 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitSapiOtu OBJECT-TYPE The transmitted SAPI part of the OTU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.63 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitDapiOtu OBJECT-TYPE The transmitted DAPI part of the OTU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.64 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitOpspOtu OBJECT-TYPE The transmitted Operator Specific part of the OTU trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.65 | OCTET STRING (SIZE(0..32)) | read-only | current |
| changePhysicalPortServiceDefTraceExpectedOdu OBJECT-TYPE Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.66 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitSapiOdu OBJECT-TYPE The transmitted SAPI part of the ODU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.67 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitDapiOdu OBJECT-TYPE The transmitted DAPI part of the ODU trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.68 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitOpspOdu OBJECT-TYPE The transmitted Operator Specific part of the ODU trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.69 | OCTET STRING (SIZE(0..32)) | read-only | current |
| changePhysicalPortServiceDefTraceExpectedOduTcmA OBJECT-TYPE Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.70 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitSapiOduTcmA OBJECT-TYPE The transmitted SAPI part of the TCMA trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.71 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitDapiOduTcmA OBJECT-TYPE The transmitted DAPI part of the TCMA trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.72 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitOpspOduTcmA OBJECT-TYPE The transmitted Operator Specific part of the TCMA trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.73 | OCTET STRING (SIZE(0..32)) | read-only | current |
| changePhysicalPortServiceDefTraceExpectedOduTcmB OBJECT-TYPE Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.74 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitSapiOduTcmB OBJECT-TYPE The transmitted SAPI part of the TCMB trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.75 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitDapiOduTcmB OBJECT-TYPE The transmitted DAPI part of the TCMB trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.76 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitOpspOduTcmB OBJECT-TYPE The transmitted Operator Specific part of the TCMB trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.77 | OCTET STRING (SIZE(0..32)) | read-only | current |
| changePhysicalPortServiceDefTraceExpectedOduTcmC OBJECT-TYPE Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.78 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitSapiOduTcmC OBJECT-TYPE The transmitted SAPI part of the TCMC trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.79 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitDapiOduTcmC OBJECT-TYPE The transmitted DAPI part of the TCMC trace (15 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.80 | OCTET STRING (SIZE(0..15)) | read-only | current |
| changePhysicalPortServiceDefTraceTransmitOpspOduTcmC OBJECT-TYPE The transmitted Operator Specific part of the TCMC trace (32 character) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.81 | OCTET STRING (SIZE(0..32)) | read-only | current |
| changePhysicalPortServiceDefTxOffDelay OBJECT-TYPE Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action. | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.82 | FspR7EnableDisable | read-only | current |
| changePhysicalPortServiceDefVoaMode OBJECT-TYPE VOA operating mode | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.83 | FspR7VoaMode | read-only | current |
| changePhysicalPortServiceDefVoaSetpoint OBJECT-TYPE Sets the optical attenuation of VOA | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.84 | Unsigned32 (0..300) | read-only | current |
| changePhysicalPortServiceDefMode OBJECT-TYPE Mode of the module, determine operation or functionality | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.85 | FspR7TransmissionMode | read-only | current |
| changePhysicalPortServiceDefMonLevel OBJECT-TYPE Highest signal level of intrusive or non-intrusive monitoring. Hardware may monitor the signal one layer higher than Termination Level (TERM). | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.86 | FspR7MonLevel | read-only | current |
| changePhysicalPortServiceDefOptimize OBJECT-TYPE Optimizes port for either protection switch time or traffic regeneration operation | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.87 | FspR7Optimize | read-only | current |
| changePhysicalPortServiceDefLinkSetup OBJECT-TYPE Support RDMA over Converged Ethernet (RoCE) | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.88 | FspR7DisableEnable | read-only | current |
| changePhysicalPortServiceDefChannelSpacing OBJECT-TYPE ITU Grid channel spacing | 1.3.6.1.4.1.2544.1.11.10.7.5.1.1.89 | FspR7ChannelSpacing | read-only | current |
| endOfChangePhysicalPortServiceDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.5.2 | Integer32 | read-only | current |
| endOfChangeServiceDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.5.10000 | Integer32 | read-only | current |
| protectionDef OBJECT-IDENTITY | 1.3.6.1.4.1.2544.1.11.10.7.6 | |||
| ffpDefTable OBJECT-TYPE FfpDefTable | 1.3.6.1.4.1.2544.1.11.10.7.6.2 | not-accessible | current | |
| ffpDefEntry OBJECT-TYPE Entry of FfpDefTable | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1 | not-accessible | current | |
| ffpDefRowStatus OBJECT-TYPE RowStatus | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.1 | RowStatus | read-only | current |
| ffpDefCreationMethod OBJECT-TYPE Type of protection (normal/forced) | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.2 | FfpType | read-only | current |
| ffpDefSDswitching OBJECT-TYPE This state controls whether the switch criteria for the APS group will include the Signal Degrade alarm. | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.3 | EnableState | read-only | current |
| ffpDefHoldOffTime OBJECT-TYPE This value controls the switch delay (0 to 10 seconds in 100ms steps) for the protection group. Changing the hold-off time when the timer is active will not affect the active timer. The change will take effect the next time the timer is active. | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.4 | ApsHoldoffTime | read-only | current |
| ffpDefProtectionMech OBJECT-TYPE The protection type of this protection group. | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.5 | ProtectionMech | read-only | current |
| ffpDefWorkingAid OBJECT-TYPE AID of working port involved in the protection group. | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.6 | SnmpAdminString | read-only | current |
| ffpDefProtectionAid OBJECT-TYPE (Protection AID) AID of protection entity involved in the protection group. | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.7 | SnmpAdminString | read-only | current |
| ffpDefSignalDegradeSwitching OBJECT-TYPE Switch Trigger Additionally on Signal Degrade Link Detection | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.8 | EnableState | read-only | current |
| ffpDefSignalFailureSwitching OBJECT-TYPE Switch Trigger on Signal Failure Link Detection | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.9 | EnableState | read-only | current |
| ffpDefFarEndIp OBJECT-TYPE IP Address assigned to PPP Termination Point on Far-End NE. Default is set by NE System on LINK establishment if FENDIPACPT = Y | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.10 | IpAddress | read-only | current |
| ffpDefPeerAid OBJECT-TYPE AID of Protection Partner involved in the protection group. | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.11 | SnmpAdminString | read-only | current |
| ffpDefApsType OBJECT-TYPE The type of APS implemented in this protection group. | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.12 | ApsType | read-only | current |
| ffpDefRevertMode OBJECT-TYPE Revertive Protection Switching | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.13 | ApsRevertMode | read-only | current |
| ffpDefWaitToRestore OBJECT-TYPE Wait to Restore Timer value | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.14 | Unsigned32 (5..12) | read-only | current |
| ffpDefDirection OBJECT-TYPE Indicates whether the APS function is 'unidirectional' (single-ended) or 'bidirectional' (dual-ended). | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.15 | ApsDirection | read-only | current |
| ffpDefProtectionType OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.16 | FspR7ProtectionType | read-only | current |
| ffpDefApsFarEndModule OBJECT-TYPE This value is the far end module type(10tcc10g or other). | 1.3.6.1.4.1.2544.1.11.10.7.6.2.1.17 | FspR7ApsFarEndModule | read-only | current |
| endOfFfpDefTable OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.6.3 | Integer32 | read-only | current |
| endOfProtectionDef OBJECT-TYPE | 1.3.6.1.4.1.2544.1.11.10.7.6.10000 | Integer32 | read-only | current |