MIBs Depot

FspR7-SPEQ-MIB

Registered at
1.3.6.1.4.1.2544.1.11.4
Last updated
2010-08-31 00:00
Organization
ADVA AG Optical Networking
Revisions
2010-10-29 00:00, 2010-08-31 00:00
Namespace
adva
Source file
FspR7-SPEQ-MIB
Digest
sha256:b994e63872dcf107040dd53d46d10cc2e1fe53f39dd6997742808c9cc406431a

Description

The Auto SPAN Equalization MIB.

Contact

ADVA AG Optical Networking Justus-von-Liebig-Str. 7 12489 Berlin, Germany Support Europe: Phone: +49 89 89 0665 848 Fax: +49 89 89 0665 22848 e-mail: support@advaoptical.com Support USA: Phone: +1 201 995 0080 Fax: +1 201 995 0081 e-mail: support-usa@advaoptical.com Support Asia: Phone: +81 3 5408 5891 Fax: +81 3 5408 5899 e-mail: support-asia@advaoptical.com

Imports

FromSymbols
ADVA-MIBEntityClass, EntityIndex, ServiceImpairment, TrapAlarmSeverity, fspR7, neEventLogIdentityTranslation, neEventLogTimeStamp
FspR7-MIBFspR7AdminState, FspR7AdminStateCaps, FspR7EntitySecondaryStates, FspR7Integer32Caps, FspR7OperState
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, mib-2, snmpModules
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TestAndIncr, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADVA-MIB
ENTITY-MIB
FspR7-MIB
FspR7-SPEQ-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
FspR7SpeqConfig
TEXTUAL-CONVENTION
Auto Span Equalization Configuration
current
FspR7SpeqDisableEnable
TEXTUAL-CONVENTION
SPEQ Dynamic Compensation for span optical power variations.
current
FspR7SpeqFarEndConfig
TEXTUAL-CONVENTION
Indicating Far-End Auto Span Equalization Configuration.
current
FspR7SpeqOperate
TEXTUAL-CONVENTION
When Per-Channel Power (PPC) changes without an SPEQ trigger condition; users could use this command to invoke SPEQ Gain recalculation/setting on the associated EDFA. (SPEQ Gain recalculation shall inherit the current value of the GainCal.) This user operated action could be service effecting. Therefore, users must be warned when operating this command; only upon user acceptance, software shall proceed with the new Gain recalculation and setting.
current
FspR7SpeqOperateCaps
TEXTUAL-CONVENTION
When Per-Channel Power (PPC) changes without an SPEQ trigger condition; users could use this command to invoke SPEQ Gain recalculation/setting on the associated EDFA. (SPEQ Gain recalculation shall inherit the current value of the GainCal.) This user operated action could be service effecting. Therefore, users must be warned when operating this command; only upon user acceptance, software shall proceed with the new Gain recalculation and setting.
current
FspR7SpeqOptLineService
TEXTUAL-CONVENTION
This parameter provides optical channel service types that are being transported to/from an optical line. See related generic group or YP for the specific usage and/or explanation.
current
FspR7SpeqPpcLimit
TEXTUAL-CONVENTION
Per-channel optical power limit value for supporting the maximum channel operation of a given optical link. PPC-LIMIT for an optical link with the 40 or the 80 max channel operations would be 4dBm or 1dBm respectively. Example: assuming a user has installed an EFDA with Output Power of 20 interfacing an optical link with the max channel operation/capacity of 40. Therefore, PPC-LIMIT (the optimum power per-channel setting) for this link is 4dBm (PT=10log(n)+PPC; where PT=Total Output Power of the EDFA=20dB, n=max channel operation=40, PPC=PPC-LIMIT).
current
FspR7SpeqQualify
TEXTUAL-CONVENTION
Determines if the qualified EDFA has been configured as Per-Amp, Booster-Amp, Line-Amp. Qualification process requires valid fiber-map.
current
FspR7SpeqStandingConditionTypes
TEXTUAL-CONVENTION
current
FspR7SpeqStatus
TEXTUAL-CONVENTION
Auto Span Equalization Status
current

Objects

NameOIDSyntaxAccessStatus
speqEntityMIB
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.11.4.10
speqEntityTable
OBJECT-TYPE
Table for SPEQ existing addresses. Entities in this table are either provisioned or not. Containers are always present in the table as long as their supporting entity is provisioned.
1.3.6.1.4.1.2544.1.11.4.10.1not-accessiblecurrent
speqEntityEntry
OBJECT-TYPE
Entry for SPEQ existing addresses.
1.3.6.1.4.1.2544.1.11.4.10.1.1not-accessiblecurrent
speqEntityIndex
OBJECT-TYPE
Existing adress index
1.3.6.1.4.1.2544.1.11.4.10.1.1.1EntityIndexaccessible-for-notifycurrent
speqEntityContainedIn
OBJECT-TYPE
Contained in
1.3.6.1.4.1.2544.1.11.4.10.1.1.2EntityIndexread-onlycurrent
speqEntityClassInstanceNumber
OBJECT-TYPE
The class instance number of this entity within the module(card)
1.3.6.1.4.1.2544.1.11.4.10.1.1.3Integer32 (1..2000 | -2147483648)read-onlycurrent
speqEntityIndexAid
OBJECT-TYPE
Name
1.3.6.1.4.1.2544.1.11.4.10.1.1.4SnmpAdminStringread-onlycurrent
speqContainsTable
OBJECT-TYPE
Table for all existing addresses. Gives the index of the subtending entity in the containment.
1.3.6.1.4.1.2544.1.11.4.10.2not-accessiblecurrent
speqContainsEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.10.2.1not-accessiblecurrent
speqContainsIndex
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.10.2.1.1EntityIndexread-onlycurrent
speqConfigurationMIB
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.11.4.12
speqConfiguration
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.1FspR7SpeqConfigread-writecurrent
speqDynamicComp
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.2FspR7SpeqDisableEnableread-writecurrent
speqConfigTable
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.10not-accessiblecurrent
speqConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.10.1not-accessiblecurrent
speqConfigAdmin
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.10.1.1FspR7AdminStateread-writecurrent
speqConfigOpticalSetpoint
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.10.1.2Integer32 (-250..50 | -2147483648)read-writecurrent
speqConfigPerChannelPower
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.10.1.3Integer32 (-20..80 | -2147483648)read-writecurrent
speqConfigGainCal
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.10.1.4Integer32 (-50..50 | -2147483648)read-writecurrent
speqConfigOperate
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.10.1.5FspR7SpeqOperateread-writecurrent
speqConfigCapTable
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.11not-accessiblecurrent
speqConfigCapEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.11.1not-accessiblecurrent
speqConfigCapAdmin
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.11.1.1FspR7AdminStateCapsread-onlycurrent
speqConfigCapOpticalSetpoint
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.11.1.2FspR7Integer32Capsread-onlycurrent
speqConfigCapPerChannelPower
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.11.1.3FspR7Integer32Capsread-onlycurrent
speqConfigCapGainCal
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.12.11.1.4FspR7Integer32Capsread-onlycurrent
speqStatusMIB
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.11.4.13
speqStatusTable
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10not-accessiblecurrent
speqStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1not-accessiblecurrent
speqStatusOper
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.1FspR7OperStateread-onlycurrent
speqStatusSecondaryStates
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.2FspR7EntitySecondaryStatesread-onlycurrent
speqStatusQualify
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.3FspR7SpeqQualifyread-onlycurrent
speqStatusOpticalLineAid
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.4EntityIndexread-onlycurrent
speqStatusOscAid
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.5EntityIndexread-onlycurrent
speqStatusOpticalLineServiceType
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.6FspR7SpeqOptLineServiceread-onlycurrent
speqStatusPerChannelPowerLimit
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.7FspR7SpeqPpcLimitread-onlycurrent
speqStatusCalculatedGain
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.8Unsigned32read-onlycurrent
speqStatusStatus
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.9FspR7SpeqStatusread-onlycurrent
speqStatusFarEndConfig
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.10FspR7SpeqFarEndConfigread-onlycurrent
speqStatusFarEndStatus
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.11FspR7SpeqStatusread-onlycurrent
speqStatusFarEndPpc
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.12Integer32read-onlycurrent
speqStatusFarEndOpt
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.13Integer32read-onlycurrent
speqStatusFarEndOpr
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.14Integer32read-onlycurrent
speqStatusNearEndOpt
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.15Integer32read-onlycurrent
speqStatusNearEndOpr
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.13.10.1.16Integer32read-onlycurrent
speqAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.11.4.14
speqTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.11.4.14.1
speqTrapsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.11.4.14.1.0
speqConditions
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.11.4.14.2
speqConditionSeverityTable
OBJECT-TYPE
This table contains a severity value for each defined standing condition reported by an entity in the NE.
1.3.6.1.4.1.2544.1.11.4.14.2.1not-accessiblecurrent
speqConditionSeverityEntry
OBJECT-TYPE
Each entry in the table represents the severity assigned to a condition.'
1.3.6.1.4.1.2544.1.11.4.14.2.1.1not-accessiblecurrent
speqConditionSeverityType
OBJECT-TYPE
This object identifies the type of alarm.
1.3.6.1.4.1.2544.1.11.4.14.2.1.1.1FspR7SpeqStandingConditionTypesnot-accessiblecurrent
speqConditionSeverityValue
OBJECT-TYPE
This object identifies the severity assigned to this alarm.
1.3.6.1.4.1.2544.1.11.4.14.2.1.1.2TrapAlarmSeverityread-writecurrent
speqCurrentConditionTable
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.14.2.2not-accessiblecurrent
speqCurrentConditionEntry
OBJECT-TYPE
1.3.6.1.4.1.2544.1.11.4.14.2.2.1not-accessiblecurrent
speqCurrentConditionType
OBJECT-TYPE
List of all interface conditions
1.3.6.1.4.1.2544.1.11.4.14.2.2.1.1FspR7SpeqStandingConditionTypesnot-accessiblecurrent
speqCurrentConditionSeverity
OBJECT-TYPE
This object identifies the current severity of alarm.
1.3.6.1.4.1.2544.1.11.4.14.2.2.1.2TrapAlarmSeverityread-onlycurrent
speqCurrentConditionAffect
OBJECT-TYPE
This object indicates the service impairment affect of the alarm.
1.3.6.1.4.1.2544.1.11.4.14.2.2.1.3ServiceImpairmentread-onlycurrent
speqCurrentConditionTimeStamp
OBJECT-TYPE
Timestamp
1.3.6.1.4.1.2544.1.11.4.14.2.2.1.4DateAndTimeread-onlycurrent

Notifications

NameOIDStatus
alarmOosDisabledSpeq
NOTIFICATION-TYPE
Non-Specific Disablement of Management Access
1.3.6.1.4.1.2544.1.11.4.14.1.0.120000current
alarmOosMaintenanceSpeq
NOTIFICATION-TYPE
Alarms are logged but not notified, service affecting changes and operations are permitted
1.3.6.1.4.1.2544.1.11.4.14.1.0.120002current
alarmMessageLossSpeq
NOTIFICATION-TYPE
SPEQ Message Loss
1.3.6.1.4.1.2544.1.11.4.14.1.0.120004current
alarmOscFiberMissingSpeq
NOTIFICATION-TYPE
SPEQ not functioning, OSC Fiber(s) missing
1.3.6.1.4.1.2544.1.11.4.14.1.0.120005current
alarmOptLowSpeq
NOTIFICATION-TYPE
Alarm is raised at SPEQ Booster-amp, when the OPT is less than the provisioned PPC by 2dBm.
1.3.6.1.4.1.2544.1.11.4.14.1.0.120006current
alarmPpcOutOfRangeSpeq
NOTIFICATION-TYPE
Adopted PPC exceeded the PPC range
1.3.6.1.4.1.2544.1.11.4.14.1.0.120007current
alarmGainTooHighSpeq
NOTIFICATION-TYPE
Auto Span Equalization Gain Out-of-Range, High - SPEQ calculated gain value is greater than the gain setting range of an EDFA type.
1.3.6.1.4.1.2544.1.11.4.14.1.0.120008current
alarmGainTooLowSpeq
NOTIFICATION-TYPE
Auto Span Equalization Gain Out-of-Range, Low - SPEQ calculated gain value is lower than the gain setting range of an EDFA type.
1.3.6.1.4.1.2544.1.11.4.14.1.0.120009current
alarmGainAdoptFailedSpeq
NOTIFICATION-TYPE
Alarm is raised when SPEQ Gain Adoption process fails.
1.3.6.1.4.1.2544.1.11.4.14.1.0.120010current
speqCreation
NOTIFICATION-TYPE
This trap is sent every time an entity is created. No containers or other sub-entities in the chassis are reported created by this trap, the NMS must read these data.
1.3.6.1.4.1.2544.1.11.4.14.1.0.124001current
speqDeletion
NOTIFICATION-TYPE
This trap is sent every time an entity is deleted. The sub-entities (containers, modules, etc.) are not reported deleted.
1.3.6.1.4.1.2544.1.11.4.14.1.0.124002current
speqStateChange
NOTIFICATION-TYPE
This trap is sent when an entity state is changed.
1.3.6.1.4.1.2544.1.11.4.14.1.0.124003current
speqObjectChange
NOTIFICATION-TYPE
This trap is sent when some object is changed.
1.3.6.1.4.1.2544.1.11.4.14.1.0.124004current
transientGainAutoAdjustSpeq
NOTIFICATION-TYPE
Span Equalization Gain auto adjustment is triggered by monitoring LOS clear condition.
1.3.6.1.4.1.2544.1.11.4.14.1.0.126000current
transientGainNoAdjustSpeq
NOTIFICATION-TYPE
Span Equalization Gain Not Adjusted.
1.3.6.1.4.1.2544.1.11.4.14.1.0.126001current
transientGainAdjustFailedSpeq
NOTIFICATION-TYPE
Span Equalization Gain Adjustment Failed.
1.3.6.1.4.1.2544.1.11.4.14.1.0.126002current
transientWaitSpeq
NOTIFICATION-TYPE
Auto Span Equalization is in progress; SPEQ-Server is busy, user must wait then request Span Equalization.
1.3.6.1.4.1.2544.1.11.4.14.1.0.126003current
transientDenySpeq
NOTIFICATION-TYPE
Span Equalization request denied; operation could not be performed by the SPEQ-Server
1.3.6.1.4.1.2544.1.11.4.14.1.0.126004current
transientPpcAdoptSpeq
NOTIFICATION-TYPE
PPC is auto calculated based on the adopted Gain for Brown-Field installations.
1.3.6.1.4.1.2544.1.11.4.14.1.0.126005current
transientPpcLimitExceededSpeq
NOTIFICATION-TYPE
Provisioned per-channel power level exceeded the allowable limit
1.3.6.1.4.1.2544.1.11.4.14.1.0.126006current
transientGainDynamicAdjustSpeq
NOTIFICATION-TYPE
Span Equalization Gain auto adjustment is triggered by dynamic optical power drift at Rx of the associated EDFA.
1.3.6.1.4.1.2544.1.11.4.14.1.0.126007current