IP-MIB
- Registered at
- 1.3.6.1.2.1.41.3.6.1.2.1.51.3.6.1.2.1.48
- Last updated
- 2006-02-02 00:00
- Organization
- IETF IPv6 MIB Revision Team
- Revisions
- 2006-02-02 00:00, 1994-11-01 00:00, 1991-03-31 00:00
- Namespace
- standard
- Source file
IP-MIB- Digest
sha256:3e6e452bb60faed013f78e3c2142c74cdc3421971697c01abebefbe74d9b8466
Description
The MIB module for managing IP and ICMP implementations, but excluding their management of IP routes. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4293; see the RFC itself for full legal notices.
Contact
Editor: Shawn A. Routhier Interworking Labs 108 Whispering Pines Dr. Suite 235 Scotts Valley, CA 95066 USA EMail: <sar@iwl.com>
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType, InetVersion, InetZoneIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, mib-2, zeroDotZero |
| SNMPv2-TC | DisplayString, PhysAddress, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TestAndIncr, TimeStamp, TruthValue |
Imported by
24 module(s) in this corpus import this one.
- ALCATEL-IND1-IP-MIB
- ALCATEL-IND1-TIMETRA-VRTR-MIB
- CISCOSB-IP
- CISCOSB-IPv6
- CISCOSB-UDP
- CISCOSB-rlIP-MIB
- CPQNIC-MIB
- Dell-Private-MIB
- Dell-UDP
- Dell-rlIP-MIB
- HP-ICF-IP-ROUTING
- HP-ICF-IPCONFIG
- HUAWEI-IF-EXT-MIB
- IP-FORWARD-MIB
- LINKSYS-IP
- LINKSYS-IPv6
- LINKSYS-UDP
- OPENBSD-SNMPD-CONF
- RADLAN-IP
- RADLAN-UDP
- RADWARE-MIB
- RAPID-CITY
- TIMETRA-VRTR-MIB
- ZYXEL-PRESTIGE-MIB
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB INET-ADDRESS-MIB IP-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.4.24 | ipForward | IP-FORWARD-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| IpAddressOriginTC TEXTUAL-CONVENTION The origin of the address. manual(2) indicates that the address was manually configured to a specified address, e.g., by user configuration. dhcp(4) indicates an address that was assigned to this system by a DHCP server. linklayer(5) indicates an address created by IPv6 stateless auto-configuration. random(6) indicates an address chosen by the system at random, e.g., an IPv4 address within 169.254/16, or an RFC 3041 privacy address. | current | |||
| IpAddressPrefixOriginTC TEXTUAL-CONVENTION The origin of this prefix. manual(2) indicates a prefix that was manually configured. wellknown(3) indicates a well-known prefix, e.g., 169.254/16 for IPv4 auto-configuration or fe80::/10 for IPv6 link-local addresses. Well known prefixes may be assigned by IANA, the address registries, or by specification in a standards track RFC. dhcp(4) indicates a prefix that was assigned by a DHCP server. routeradv(5) indicates a prefix learned from a router advertisement. Note: while IpAddressOriginTC and IpAddressPrefixOriginTC are similar, they are not identical. The first defines how an address was created, while the second defines how a prefix was found. | current | |||
| IpAddressStatusTC TEXTUAL-CONVENTION The status of an address. Most of the states correspond to states from the IPv6 Stateless Address Autoconfiguration protocol. The preferred(1) state indicates that this is a valid address that can appear as the destination or source address of a packet. The deprecated(2) state indicates that this is a valid but deprecated address that should no longer be used as a source address in new communications, but packets addressed to such an address are processed as expected. The invalid(3) state indicates that this isn't a valid address and it shouldn't appear as the destination or source address of a packet. The inaccessible(4) state indicates that the address is not accessible because the interface to which this address is assigned is not operational. The unknown(5) state indicates that the status cannot be determined for some reason. The tentative(6) state indicates that the uniqueness of the address on the link is being verified. Addresses in this state should not be used for general communication and should only be used to determine the uniqueness of the address. The duplicate(7) state indicates the address has been determined to be non-unique on the link and so must not be used. The optimistic(8) state indicates the address is available for use, subject to restrictions, while its uniqueness on a link is being verified. In the absence of other information, an IPv4 address is always preferred(1). | current | |||
| Ipv6AddressIfIdentifierTC TEXTUAL-CONVENTION This data type is used to model IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ip OBJECT-IDENTITY | 1.3.6.1.2.1.4 | |||
| ipForwarding OBJECT-TYPE The indication of whether this entity is acting as an IPv4 router in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv4 routers forward datagrams. IPv4 hosts do not (except those source-routed via the host). When this object is written, the entity should save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system. Note: a stronger requirement is not used because this object was previously defined. | 1.3.6.1.2.1.4.1 | INTEGER {forwarding(1), notForwarding(2)} | read-write | current |
| ipDefaultTTL OBJECT-TYPE The default value inserted into the Time-To-Live field of the IPv4 header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol. When this object is written, the entity should save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system. Note: a stronger requirement is not used because this object was previously defined. | 1.3.6.1.2.1.4.2 | Integer32 (1..255) | read-write | current |
| ipInReceives OBJECT-TYPE The total number of input datagrams received from interfaces, including those received in error. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInRecieves. | 1.3.6.1.2.1.4.3 | Counter32 | read-only | deprecated |
| ipInHdrErrors OBJECT-TYPE The number of input datagrams discarded due to errors in their IPv4 headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IPv4 options, etc. This object has been deprecated as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInHdrErrors. | 1.3.6.1.2.1.4.4 | Counter32 | read-only | deprecated |
| ipInAddrErrors OBJECT-TYPE The number of input datagrams discarded because the IPv4 address in their IPv4 header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IPv4 routers, and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInAddrErrors. | 1.3.6.1.2.1.4.5 | Counter32 | read-only | deprecated |
| ipForwDatagrams OBJECT-TYPE The number of input datagrams for which this entity was not their final IPv4 destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IPv4 routers, this counter will include only those packets which were Source-Routed via this entity, and the Source-Route option processing was successful. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInForwDatagrams. | 1.3.6.1.2.1.4.6 | Counter32 | read-only | deprecated |
| ipInUnknownProtos OBJECT-TYPE The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInUnknownProtos. | 1.3.6.1.2.1.4.7 | Counter32 | read-only | deprecated |
| ipInDiscards OBJECT-TYPE The number of input IPv4 datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInDiscards. | 1.3.6.1.2.1.4.8 | Counter32 | read-only | deprecated |
| ipInDelivers OBJECT-TYPE The total number of input datagrams successfully delivered to IPv4 user-protocols (including ICMP). This object has been deprecated as a new IP version neutral table has been added. It is loosely replaced by ipSystemStatsIndelivers. | 1.3.6.1.2.1.4.9 | Counter32 | read-only | deprecated |
| ipOutRequests OBJECT-TYPE The total number of IPv4 datagrams which local IPv4 user protocols (including ICMP) supplied to IPv4 in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutRequests. | 1.3.6.1.2.1.4.10 | Counter32 | read-only | deprecated |
| ipOutDiscards OBJECT-TYPE The number of output IPv4 datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutDiscards. | 1.3.6.1.2.1.4.11 | Counter32 | read-only | deprecated |
| ipOutNoRoutes OBJECT-TYPE The number of IPv4 datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagrams which a host cannot route because all of its default routers are down. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutNoRoutes. | 1.3.6.1.2.1.4.12 | Counter32 | read-only | deprecated |
| ipReasmTimeout OBJECT-TYPE The maximum number of seconds that received fragments are held while they are awaiting reassembly at this entity. | 1.3.6.1.2.1.4.13 | Integer32 | read-only | current |
| ipReasmReqds OBJECT-TYPE The number of IPv4 fragments received which needed to be reassembled at this entity. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsReasmReqds. | 1.3.6.1.2.1.4.14 | Counter32 | read-only | deprecated |
| ipReasmOKs OBJECT-TYPE The number of IPv4 datagrams successfully re-assembled. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsReasmOKs. | 1.3.6.1.2.1.4.15 | Counter32 | read-only | deprecated |
| ipReasmFails OBJECT-TYPE The number of failures detected by the IPv4 re-assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IPv4 fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsReasmFails. | 1.3.6.1.2.1.4.16 | Counter32 | read-only | deprecated |
| ipFragOKs OBJECT-TYPE The number of IPv4 datagrams that have been successfully fragmented at this entity. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutFragOKs. | 1.3.6.1.2.1.4.17 | Counter32 | read-only | deprecated |
| ipFragFails OBJECT-TYPE The number of IPv4 datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutFragFails. | 1.3.6.1.2.1.4.18 | Counter32 | read-only | deprecated |
| ipFragCreates OBJECT-TYPE The number of IPv4 datagram fragments that have been generated as a result of fragmentation at this entity. This object has been deprecated as a new IP version neutral table has been added. It is loosely replaced by ipSystemStatsOutFragCreates. | 1.3.6.1.2.1.4.19 | Counter32 | read-only | deprecated |
| ipAddrTable OBJECT-TYPE The table of addressing information relevant to this entity's IPv4 addresses. This table has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by the ipAddressTable although several objects that weren't deemed useful weren't carried forward while another (ipAdEntReasmMaxSize) was moved to the ipv4InterfaceTable. | 1.3.6.1.2.1.4.20 | not-accessible | deprecated | |
| ipAddrEntry OBJECT-TYPE The addressing information for one of this entity's IPv4 addresses. | 1.3.6.1.2.1.4.20.1 | not-accessible | deprecated | |
| ipAdEntAddr OBJECT-TYPE The IPv4 address to which this entry's addressing information pertains. | 1.3.6.1.2.1.4.20.1.1 | IpAddress | read-only | deprecated |
| ipAdEntIfIndex OBJECT-TYPE The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.20.1.2 | INTEGER (1..2147483647) | read-only | deprecated |
| ipAdEntNetMask OBJECT-TYPE The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0. | 1.3.6.1.2.1.4.20.1.3 | IpAddress | read-only | deprecated |
| ipAdEntBcastAddr OBJECT-TYPE The value of the least-significant bit in the IPv4 broadcast address used for sending datagrams on the (logical) interface associated with the IPv4 address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcast addresses used by the entity on this (logical) interface. | 1.3.6.1.2.1.4.20.1.4 | INTEGER (0..1) | read-only | deprecated |
| ipAdEntReasmMaxSize OBJECT-TYPE The size of the largest IPv4 datagram which this entity can re-assemble from incoming IPv4 fragmented datagrams received on this interface. | 1.3.6.1.2.1.4.20.1.5 | INTEGER (0..65535) | read-only | deprecated |
| ipNetToMediaTable OBJECT-TYPE The IPv4 Address Translation table used for mapping from IPv4 addresses to physical addresses. This table has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by the ipNetToPhysicalTable. | 1.3.6.1.2.1.4.22 | not-accessible | deprecated | |
| ipNetToMediaEntry OBJECT-TYPE Each entry contains one IpAddress to `physical' address equivalence. | 1.3.6.1.2.1.4.22.1 | not-accessible | deprecated | |
| ipNetToMediaIfIndex OBJECT-TYPE The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. This object predates the rule limiting index objects to a max access value of 'not-accessible' and so continues to use a value of 'read-create'. | 1.3.6.1.2.1.4.22.1.1 | INTEGER (1..2147483647) | read-create | deprecated |
| ipNetToMediaPhysAddress OBJECT-TYPE The media-dependent `physical' address. This object should return 0 when this entry is in the 'incomplete' state. As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined. | 1.3.6.1.2.1.4.22.1.2 | PhysAddress (SIZE(0..65535)) | read-create | deprecated |
| ipNetToMediaNetAddress OBJECT-TYPE The IpAddress corresponding to the media-dependent `physical' address. This object predates the rule limiting index objects to a max access value of 'not-accessible' and so continues to use a value of 'read-create'. | 1.3.6.1.2.1.4.22.1.3 | IpAddress | read-create | deprecated |
| ipNetToMediaType OBJECT-TYPE The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dis-associates the interface identified with said entry from the mapping identified with said entry. It is an implementation- specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object. As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined. | 1.3.6.1.2.1.4.22.1.4 | INTEGER {other(1), invalid(2), dynamic(3), static(4)} | read-create | deprecated |
| ipRoutingDiscards OBJECT-TYPE The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries. This object was defined in pre-IPv6 versions of the IP MIB. It was implicitly IPv4 only, but the original specifications did not indicate this protocol restriction. In order to clarify the specifications, this object has been deprecated and a similar, but more thoroughly clarified, object has been added to the IP-FORWARD-MIB. | 1.3.6.1.2.1.4.23 | Counter32 | read-only | deprecated |
| ipv6IpForwarding OBJECT-TYPE The indication of whether this entity is acting as an IPv6 router on any interface in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system. | 1.3.6.1.2.1.4.25 | INTEGER {forwarding(1), notForwarding(2)} | read-write | current |
| ipv6IpDefaultHopLimit OBJECT-TYPE The default value inserted into the Hop Limit field of the IPv6 header of datagrams originated at this entity whenever a Hop Limit value is not supplied by the transport layer protocol. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system. | 1.3.6.1.2.1.4.26 | Integer32 (0..255) | read-write | current |
| ipv4InterfaceTableLastChange OBJECT-TYPE The value of sysUpTime on the most recent occasion at which a row in the ipv4InterfaceTable was added or deleted, or when an ipv4InterfaceReasmMaxSize or an ipv4InterfaceEnableStatus object was modified. If new objects are added to the ipv4InterfaceTable that require the ipv4InterfaceTableLastChange to be updated when they are modified, they must specify that requirement in their description clause. | 1.3.6.1.2.1.4.27 | TimeStamp | read-only | current |
| ipv4InterfaceTable OBJECT-TYPE The table containing per-interface IPv4-specific information. | 1.3.6.1.2.1.4.28 | not-accessible | current | |
| ipv4InterfaceEntry OBJECT-TYPE An entry containing IPv4-specific information for a specific interface. | 1.3.6.1.2.1.4.28.1 | not-accessible | current | |
| ipv4InterfaceIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.28.1.1 | InterfaceIndex | not-accessible | current |
| ipv4InterfaceReasmMaxSize OBJECT-TYPE The size of the largest IPv4 datagram that this entity can re-assemble from incoming IPv4 fragmented datagrams received on this interface. | 1.3.6.1.2.1.4.28.1.2 | Integer32 (0..65535) | read-only | current |
| ipv4InterfaceEnableStatus OBJECT-TYPE The indication of whether IPv4 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv4 stack. The IF-MIB should be used to control the state of the interface. | 1.3.6.1.2.1.4.28.1.3 | INTEGER {up(1), down(2)} | read-write | current |
| ipv4InterfaceRetransmitTime OBJECT-TYPE The time between retransmissions of ARP requests to a neighbor when resolving the address or when probing the reachability of a neighbor. | 1.3.6.1.2.1.4.28.1.4 | Unsigned32 | read-only | current |
| ipv6InterfaceTableLastChange OBJECT-TYPE The value of sysUpTime on the most recent occasion at which a row in the ipv6InterfaceTable was added or deleted or when an ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier, ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime, ipv6InterfaceRetransmitTime, or ipv6InterfaceForwarding object was modified. If new objects are added to the ipv6InterfaceTable that require the ipv6InterfaceTableLastChange to be updated when they are modified, they must specify that requirement in their description clause. | 1.3.6.1.2.1.4.29 | TimeStamp | read-only | current |
| ipv6InterfaceTable OBJECT-TYPE The table containing per-interface IPv6-specific information. | 1.3.6.1.2.1.4.30 | not-accessible | current | |
| ipv6InterfaceEntry OBJECT-TYPE An entry containing IPv6-specific information for a given interface. | 1.3.6.1.2.1.4.30.1 | not-accessible | current | |
| ipv6InterfaceIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.30.1.1 | InterfaceIndex | not-accessible | current |
| ipv6InterfaceReasmMaxSize OBJECT-TYPE The size of the largest IPv6 datagram that this entity can re-assemble from incoming IPv6 fragmented datagrams received on this interface. | 1.3.6.1.2.1.4.30.1.2 | Unsigned32 (1500..65535) | read-only | current |
| ipv6InterfaceIdentifier OBJECT-TYPE The Interface Identifier for this interface. The Interface Identifier is combined with an address prefix to form an interface address. By default, the Interface Identifier is auto-configured according to the rules of the link type to which this interface is attached. A zero length identifier may be used where appropriate. One possible example is a loopback interface. | 1.3.6.1.2.1.4.30.1.3 | Ipv6AddressIfIdentifierTC | read-only | current |
| ipv6InterfaceEnableStatus OBJECT-TYPE The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 stack. The IF-MIB should be used to control the state of the interface. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system. | 1.3.6.1.2.1.4.30.1.5 | INTEGER {up(1), down(2)} | read-write | current |
| ipv6InterfaceReachableTime OBJECT-TYPE The time a neighbor is considered reachable after receiving a reachability confirmation. | 1.3.6.1.2.1.4.30.1.6 | Unsigned32 | read-only | current |
| ipv6InterfaceRetransmitTime OBJECT-TYPE The time between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor. | 1.3.6.1.2.1.4.30.1.7 | Unsigned32 | read-only | current |
| ipv6InterfaceForwarding OBJECT-TYPE The indication of whether this entity is acting as an IPv6 router on this interface with respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). This object is constrained by ipv6IpForwarding and is ignored if ipv6IpForwarding is set to notForwarding. Those systems that do not provide per-interface control of the forwarding function should set this object to forwarding for all interfaces and allow the ipv6IpForwarding object to control the forwarding capability. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system. | 1.3.6.1.2.1.4.30.1.8 | INTEGER {forwarding(1), notForwarding(2)} | read-write | current |
| ipTrafficStats OBJECT-IDENTITY | 1.3.6.1.2.1.4.31 | |||
| ipSystemStatsTable OBJECT-TYPE The table containing system wide, IP version specific traffic statistics. This table and the ipIfStatsTable contain similar objects whose difference is in their granularity. Where this table contains system wide traffic statistics, the ipIfStatsTable contains the same statistics but counted on a per-interface basis. | 1.3.6.1.2.1.4.31.1 | not-accessible | current | |
| ipSystemStatsEntry OBJECT-TYPE A statistics entry containing system-wide objects for a particular IP version. | 1.3.6.1.2.1.4.31.1.1 | not-accessible | current | |
| ipSystemStatsIPVersion OBJECT-TYPE The IP version of this row. | 1.3.6.1.2.1.4.31.1.1.1 | InetVersion | not-accessible | current |
| ipSystemStatsInReceives OBJECT-TYPE The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.3 | Counter32 | read-only | current |
| ipSystemStatsHCInReceives OBJECT-TYPE The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as ipSystemStatsInReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.4 | Counter64 | read-only | current |
| ipSystemStatsInOctets OBJECT-TYPE The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in ipSystemStatsInReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.5 | Counter32 | read-only | current |
| ipSystemStatsHCInOctets OBJECT-TYPE The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as ipSystemStatsInOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.6 | Counter64 | read-only | current |
| ipSystemStatsInHdrErrors OBJECT-TYPE The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.7 | Counter32 | read-only | current |
| ipSystemStatsInNoRoutes OBJECT-TYPE The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.8 | Counter32 | read-only | current |
| ipSystemStatsInAddrErrors OBJECT-TYPE The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.9 | Counter32 | read-only | current |
| ipSystemStatsInUnknownProtos OBJECT-TYPE The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.10 | Counter32 | read-only | current |
| ipSystemStatsInTruncatedPkts OBJECT-TYPE The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.11 | Counter32 | read-only | current |
| ipSystemStatsInForwDatagrams OBJECT-TYPE The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.12 | Counter32 | read-only | current |
| ipSystemStatsHCInForwDatagrams OBJECT-TYPE The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as ipSystemStatsInForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.13 | Counter64 | read-only | current |
| ipSystemStatsReasmReqds OBJECT-TYPE The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.14 | Counter32 | read-only | current |
| ipSystemStatsReasmOKs OBJECT-TYPE The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.15 | Counter32 | read-only | current |
| ipSystemStatsReasmFails OBJECT-TYPE The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.16 | Counter32 | read-only | current |
| ipSystemStatsInDiscards OBJECT-TYPE The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.17 | Counter32 | read-only | current |
| ipSystemStatsInDelivers OBJECT-TYPE The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.18 | Counter32 | read-only | current |
| ipSystemStatsHCInDelivers OBJECT-TYPE The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipSystemStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.19 | Counter64 | read-only | current |
| ipSystemStatsOutRequests OBJECT-TYPE The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipSystemStatsOutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.20 | Counter32 | read-only | current |
| ipSystemStatsHCOutRequests OBJECT-TYPE The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as ipSystemStatsOutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.21 | Counter64 | read-only | current |
| ipSystemStatsOutNoRoutes OBJECT-TYPE The number of locally generated IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.22 | Counter32 | read-only | current |
| ipSystemStatsOutForwDatagrams OBJECT-TYPE The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.23 | Counter32 | read-only | current |
| ipSystemStatsHCOutForwDatagrams OBJECT-TYPE The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as ipSystemStatsOutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.24 | Counter64 | read-only | current |
| ipSystemStatsOutDiscards OBJECT-TYPE The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipSystemStatsOutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.25 | Counter32 | read-only | current |
| ipSystemStatsOutFragReqds OBJECT-TYPE The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.26 | Counter32 | read-only | current |
| ipSystemStatsOutFragOKs OBJECT-TYPE The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.27 | Counter32 | read-only | current |
| ipSystemStatsOutFragFails OBJECT-TYPE The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.28 | Counter32 | read-only | current |
| ipSystemStatsOutFragCreates OBJECT-TYPE The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.29 | Counter32 | read-only | current |
| ipSystemStatsOutTransmits OBJECT-TYPE The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.30 | Counter32 | read-only | current |
| ipSystemStatsHCOutTransmits OBJECT-TYPE The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as ipSystemStatsOutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.31 | Counter64 | read-only | current |
| ipSystemStatsOutOctets OBJECT-TYPE The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipSystemStatsOutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.32 | Counter32 | read-only | current |
| ipSystemStatsHCOutOctets OBJECT-TYPE The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as ipSystemStatsOutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.33 | Counter64 | read-only | current |
| ipSystemStatsInMcastPkts OBJECT-TYPE The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.34 | Counter32 | read-only | current |
| ipSystemStatsHCInMcastPkts OBJECT-TYPE The number of IP multicast datagrams received. This object counts the same datagrams as ipSystemStatsInMcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.35 | Counter64 | read-only | current |
| ipSystemStatsInMcastOctets OBJECT-TYPE The total number of octets received in IP multicast datagrams. Octets from datagrams counted in ipSystemStatsInMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.36 | Counter32 | read-only | current |
| ipSystemStatsHCInMcastOctets OBJECT-TYPE The total number of octets received in IP multicast datagrams. This object counts the same octets as ipSystemStatsInMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.37 | Counter64 | read-only | current |
| ipSystemStatsOutMcastPkts OBJECT-TYPE The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.38 | Counter32 | read-only | current |
| ipSystemStatsHCOutMcastPkts OBJECT-TYPE The number of IP multicast datagrams transmitted. This object counts the same datagrams as ipSystemStatsOutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.39 | Counter64 | read-only | current |
| ipSystemStatsOutMcastOctets OBJECT-TYPE The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in ipSystemStatsOutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.40 | Counter32 | read-only | current |
| ipSystemStatsHCOutMcastOctets OBJECT-TYPE The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as ipSystemStatsOutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.41 | Counter64 | read-only | current |
| ipSystemStatsInBcastPkts OBJECT-TYPE The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.42 | Counter32 | read-only | current |
| ipSystemStatsHCInBcastPkts OBJECT-TYPE The number of IP broadcast datagrams received. This object counts the same datagrams as ipSystemStatsInBcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.43 | Counter64 | read-only | current |
| ipSystemStatsOutBcastPkts OBJECT-TYPE The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.44 | Counter32 | read-only | current |
| ipSystemStatsHCOutBcastPkts OBJECT-TYPE The number of IP broadcast datagrams transmitted. This object counts the same datagrams as ipSystemStatsOutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.1.1.45 | Counter64 | read-only | current |
| ipSystemStatsDiscontinuityTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. | 1.3.6.1.2.1.4.31.1.1.46 | TimeStamp | read-only | current |
| ipSystemStatsRefreshRate OBJECT-TYPE The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry. | 1.3.6.1.2.1.4.31.1.1.47 | Unsigned32 | read-only | current |
| ipIfStatsTableLastChange OBJECT-TYPE The value of sysUpTime on the most recent occasion at which a row in the ipIfStatsTable was added or deleted. If new objects are added to the ipIfStatsTable that require the ipIfStatsTableLastChange to be updated when they are modified, they must specify that requirement in their description clause. | 1.3.6.1.2.1.4.31.2 | TimeStamp | read-only | current |
| ipIfStatsTable OBJECT-TYPE The table containing per-interface traffic statistics. This table and the ipSystemStatsTable contain similar objects whose difference is in their granularity. Where this table contains per-interface statistics, the ipSystemStatsTable contains the same statistics, but counted on a system wide basis. | 1.3.6.1.2.1.4.31.3 | not-accessible | current | |
| ipIfStatsEntry OBJECT-TYPE An interface statistics entry containing objects for a particular interface and version of IP. | 1.3.6.1.2.1.4.31.3.1 | not-accessible | current | |
| ipIfStatsIPVersion OBJECT-TYPE The IP version of this row. | 1.3.6.1.2.1.4.31.3.1.1 | InetVersion | not-accessible | current |
| ipIfStatsIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.31.3.1.2 | InterfaceIndex | not-accessible | current |
| ipIfStatsInReceives OBJECT-TYPE The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.3 | Counter32 | read-only | current |
| ipIfStatsHCInReceives OBJECT-TYPE The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as ipIfStatsInReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.4 | Counter64 | read-only | current |
| ipIfStatsInOctets OBJECT-TYPE The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in ipIfStatsInReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.5 | Counter32 | read-only | current |
| ipIfStatsHCInOctets OBJECT-TYPE The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as ipIfStatsInOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.6 | Counter64 | read-only | current |
| ipIfStatsInHdrErrors OBJECT-TYPE The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.7 | Counter32 | read-only | current |
| ipIfStatsInNoRoutes OBJECT-TYPE The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.8 | Counter32 | read-only | current |
| ipIfStatsInAddrErrors OBJECT-TYPE The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.9 | Counter32 | read-only | current |
| ipIfStatsInUnknownProtos OBJECT-TYPE The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.10 | Counter32 | read-only | current |
| ipIfStatsInTruncatedPkts OBJECT-TYPE The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.11 | Counter32 | read-only | current |
| ipIfStatsInForwDatagrams OBJECT-TYPE The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.12 | Counter32 | read-only | current |
| ipIfStatsHCInForwDatagrams OBJECT-TYPE The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as ipIfStatsInForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.13 | Counter64 | read-only | current |
| ipIfStatsReasmReqds OBJECT-TYPE The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.14 | Counter32 | read-only | current |
| ipIfStatsReasmOKs OBJECT-TYPE The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.15 | Counter32 | read-only | current |
| ipIfStatsReasmFails OBJECT-TYPE The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.16 | Counter32 | read-only | current |
| ipIfStatsInDiscards OBJECT-TYPE The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.17 | Counter32 | read-only | current |
| ipIfStatsInDelivers OBJECT-TYPE The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.18 | Counter32 | read-only | current |
| ipIfStatsHCInDelivers OBJECT-TYPE The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipIfStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.19 | Counter64 | read-only | current |
| ipIfStatsOutRequests OBJECT-TYPE The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipIfStatsOutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.20 | Counter32 | read-only | current |
| ipIfStatsHCOutRequests OBJECT-TYPE The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as ipIfStatsOutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.21 | Counter64 | read-only | current |
| ipIfStatsOutForwDatagrams OBJECT-TYPE The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.23 | Counter32 | read-only | current |
| ipIfStatsHCOutForwDatagrams OBJECT-TYPE The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as ipIfStatsOutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.24 | Counter64 | read-only | current |
| ipIfStatsOutDiscards OBJECT-TYPE The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipIfStatsOutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.25 | Counter32 | read-only | current |
| ipIfStatsOutFragReqds OBJECT-TYPE The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.26 | Counter32 | read-only | current |
| ipIfStatsOutFragOKs OBJECT-TYPE The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.27 | Counter32 | read-only | current |
| ipIfStatsOutFragFails OBJECT-TYPE The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.28 | Counter32 | read-only | current |
| ipIfStatsOutFragCreates OBJECT-TYPE The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.29 | Counter32 | read-only | current |
| ipIfStatsOutTransmits OBJECT-TYPE The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.30 | Counter32 | read-only | current |
| ipIfStatsHCOutTransmits OBJECT-TYPE The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as ipIfStatsOutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.31 | Counter64 | read-only | current |
| ipIfStatsOutOctets OBJECT-TYPE The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipIfStatsOutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.32 | Counter32 | read-only | current |
| ipIfStatsHCOutOctets OBJECT-TYPE The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as ipIfStatsOutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.33 | Counter64 | read-only | current |
| ipIfStatsInMcastPkts OBJECT-TYPE The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.34 | Counter32 | read-only | current |
| ipIfStatsHCInMcastPkts OBJECT-TYPE The number of IP multicast datagrams received. This object counts the same datagrams as ipIfStatsInMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.35 | Counter64 | read-only | current |
| ipIfStatsInMcastOctets OBJECT-TYPE The total number of octets received in IP multicast datagrams. Octets from datagrams counted in ipIfStatsInMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.36 | Counter32 | read-only | current |
| ipIfStatsHCInMcastOctets OBJECT-TYPE The total number of octets received in IP multicast datagrams. This object counts the same octets as ipIfStatsInMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.37 | Counter64 | read-only | current |
| ipIfStatsOutMcastPkts OBJECT-TYPE The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.38 | Counter32 | read-only | current |
| ipIfStatsHCOutMcastPkts OBJECT-TYPE The number of IP multicast datagrams transmitted. This object counts the same datagrams as ipIfStatsOutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.39 | Counter64 | read-only | current |
| ipIfStatsOutMcastOctets OBJECT-TYPE The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in ipIfStatsOutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.40 | Counter32 | read-only | current |
| ipIfStatsHCOutMcastOctets OBJECT-TYPE The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as ipIfStatsOutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.41 | Counter64 | read-only | current |
| ipIfStatsInBcastPkts OBJECT-TYPE The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.42 | Counter32 | read-only | current |
| ipIfStatsHCInBcastPkts OBJECT-TYPE The number of IP broadcast datagrams received. This object counts the same datagrams as ipIfStatsInBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.43 | Counter64 | read-only | current |
| ipIfStatsOutBcastPkts OBJECT-TYPE The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.44 | Counter32 | read-only | current |
| ipIfStatsHCOutBcastPkts OBJECT-TYPE The number of IP broadcast datagrams transmitted. This object counts the same datagrams as ipIfStatsOutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime. | 1.3.6.1.2.1.4.31.3.1.45 | Counter64 | read-only | current |
| ipIfStatsDiscontinuityTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. | 1.3.6.1.2.1.4.31.3.1.46 | TimeStamp | read-only | current |
| ipIfStatsRefreshRate OBJECT-TYPE The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry. | 1.3.6.1.2.1.4.31.3.1.47 | Unsigned32 | read-only | current |
| ipAddressPrefixTable OBJECT-TYPE This table allows the user to determine the source of an IP address or set of IP addresses, and allows other tables to share the information via pointer rather than by copying. For example, when the node configures both a unicast and anycast address for a prefix, the ipAddressPrefix objects for those addresses will point to a single row in this table. This table primarily provides support for IPv6 prefixes, and several of the objects are less meaningful for IPv4. The table continues to allow IPv4 addresses to allow future flexibility. In order to promote a common configuration, this document includes suggestions for default values for IPv4 prefixes. Each of these values may be overridden if an object is meaningful to the node. All prefixes used by this entity should be included in this table independent of how the entity learned the prefix. (This table isn't limited to prefixes learned from router advertisements.) | 1.3.6.1.2.1.4.32 | not-accessible | current | |
| ipAddressPrefixEntry OBJECT-TYPE An entry in the ipAddressPrefixTable. | 1.3.6.1.2.1.4.32.1 | not-accessible | current | |
| ipAddressPrefixIfIndex OBJECT-TYPE The index value that uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.32.1.1 | InterfaceIndex | not-accessible | current |
| ipAddressPrefixType OBJECT-TYPE The address type of ipAddressPrefix. | 1.3.6.1.2.1.4.32.1.2 | InetAddressType | not-accessible | current |
| ipAddressPrefixPrefix OBJECT-TYPE The address prefix. The address type of this object is specified in ipAddressPrefixType. The length of this object is the standard length for objects of that type (4 or 16 bytes). Any bits after ipAddressPrefixLength must be zero. Implementors need to be aware that, if the size of ipAddressPrefixPrefix exceeds 114 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.4.32.1.3 | InetAddress | not-accessible | current |
| ipAddressPrefixLength OBJECT-TYPE The prefix length associated with this prefix. The value 0 has no special meaning for this object. It simply refers to address '::/0'. | 1.3.6.1.2.1.4.32.1.4 | InetAddressPrefixLength | not-accessible | current |
| ipAddressPrefixOrigin OBJECT-TYPE The origin of this prefix. | 1.3.6.1.2.1.4.32.1.5 | IpAddressPrefixOriginTC | read-only | current |
| ipAddressPrefixOnLinkFlag OBJECT-TYPE This object has the value 'true(1)', if this prefix can be used for on-link determination; otherwise, the value is 'false(2)'. The default for IPv4 prefixes is 'true(1)'. | 1.3.6.1.2.1.4.32.1.6 | TruthValue | read-only | current |
| ipAddressPrefixAutonomousFlag OBJECT-TYPE Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e., can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address. The default for IPv4 prefixes is 'false(2)'. | 1.3.6.1.2.1.4.32.1.7 | TruthValue | read-only | current |
| ipAddressPrefixAdvPreferredLifetime OBJECT-TYPE The remaining length of time, in seconds, that this prefix will continue to be preferred, i.e., time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected. The default for IPv4 prefixes is 4,294,967,295 (infinity). | 1.3.6.1.2.1.4.32.1.8 | Unsigned32 | read-only | current |
| ipAddressPrefixAdvValidLifetime OBJECT-TYPE The remaining length of time, in seconds, that this prefix will continue to be valid, i.e., time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet. The default for IPv4 prefixes is 4,294,967,295 (infinity). | 1.3.6.1.2.1.4.32.1.9 | Unsigned32 | read-only | current |
| ipAddressSpinLock OBJECT-TYPE An advisory lock used to allow cooperating SNMP managers to coordinate their use of the set operation in creating or modifying rows within this table. In order to use this lock to coordinate the use of set operations, managers should first retrieve ipAddressTableSpinLock. They should then determine the appropriate row to create or modify. Finally, they should issue the appropriate set command, including the retrieved value of ipAddressSpinLock. If another manager has altered the table in the meantime, then the value of ipAddressSpinLock will have changed, and the creation will fail as it will be specifying an incorrect value for ipAddressSpinLock. It is suggested, but not required, that the ipAddressSpinLock be the first var bind for each set of objects representing a 'row' in a PDU. | 1.3.6.1.2.1.4.33 | TestAndIncr | read-write | current |
| ipAddressTable OBJECT-TYPE This table contains addressing information relevant to the entity's interfaces. This table does not contain multicast address information. Tables for such information should be contained in multicast specific MIBs, such as RFC 3019. While this table is writable, the user will note that several objects, such as ipAddressOrigin, are not. The intention in allowing a user to write to this table is to allow them to add or remove any entry that isn't permanent. The user should be allowed to modify objects and entries when that would not cause inconsistencies within the table. Allowing write access to objects, such as ipAddressOrigin, could allow a user to insert an entry and then label it incorrectly. Note well: When including IPv6 link-local addresses in this table, the entry must use an InetAddressType of 'ipv6z' in order to differentiate between the possible interfaces. | 1.3.6.1.2.1.4.34 | not-accessible | current | |
| ipAddressEntry OBJECT-TYPE An address mapping for a particular interface. | 1.3.6.1.2.1.4.34.1 | not-accessible | current | |
| ipAddressAddrType OBJECT-TYPE The address type of ipAddressAddr. | 1.3.6.1.2.1.4.34.1.1 | InetAddressType | not-accessible | current |
| ipAddressAddr OBJECT-TYPE The IP address to which this entry's addressing information pertains. The address type of this object is specified in ipAddressAddrType. Implementors need to be aware that if the size of ipAddressAddr exceeds 116 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.4.34.1.2 | InetAddress | not-accessible | current |
| ipAddressIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.34.1.3 | InterfaceIndex | read-create | current |
| ipAddressType OBJECT-TYPE The type of address. broadcast(3) is not a valid value for IPv6 addresses (RFC 3513). | 1.3.6.1.2.1.4.34.1.4 | INTEGER {unicast(1), anycast(2), broadcast(3)} | read-create | current |
| ipAddressPrefix OBJECT-TYPE A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row. | 1.3.6.1.2.1.4.34.1.5 | RowPointer | read-only | current |
| ipAddressOrigin OBJECT-TYPE The origin of the address. | 1.3.6.1.2.1.4.34.1.6 | IpAddressOriginTC | read-only | current |
| ipAddressStatus OBJECT-TYPE The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1). | 1.3.6.1.2.1.4.34.1.7 | IpAddressStatusTC | read-create | current |
| ipAddressCreated OBJECT-TYPE The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.2.1.4.34.1.8 | TimeStamp | read-only | current |
| ipAddressLastChanged OBJECT-TYPE The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.2.1.4.34.1.9 | TimeStamp | read-only | current |
| ipAddressRowStatus OBJECT-TYPE The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the ipAddressIfIndex has been set to a valid index. | 1.3.6.1.2.1.4.34.1.10 | RowStatus | read-create | current |
| ipAddressStorageType OBJECT-TYPE The storage type for this conceptual row. If this object has a value of 'permanent', then no other objects are required to be able to be modified. | 1.3.6.1.2.1.4.34.1.11 | StorageType | read-create | current |
| ipNetToPhysicalTable OBJECT-TYPE The IP Address Translation table used for mapping from IP addresses to physical addresses. The Address Translation tables contain the IP address to 'physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries. While many protocols may be used to populate this table, ARP and Neighbor Discovery are the most likely options. | 1.3.6.1.2.1.4.35 | not-accessible | current | |
| ipNetToPhysicalEntry OBJECT-TYPE Each entry contains one IP address to `physical' address equivalence. | 1.3.6.1.2.1.4.35.1 | not-accessible | current | |
| ipNetToPhysicalIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.35.1.1 | InterfaceIndex | not-accessible | current |
| ipNetToPhysicalNetAddressType OBJECT-TYPE The type of ipNetToPhysicalNetAddress. | 1.3.6.1.2.1.4.35.1.2 | InetAddressType | not-accessible | current |
| ipNetToPhysicalNetAddress OBJECT-TYPE The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in ipNetToPhysicalAddressType. Implementors need to be aware that if the size of ipNetToPhysicalNetAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.4.35.1.3 | InetAddress | not-accessible | current |
| ipNetToPhysicalPhysAddress OBJECT-TYPE The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage. | 1.3.6.1.2.1.4.35.1.4 | PhysAddress (SIZE(0..65535)) | read-create | current |
| ipNetToPhysicalLastUpdated OBJECT-TYPE The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.2.1.4.35.1.5 | TimeStamp | read-only | current |
| ipNetToPhysicalType OBJECT-TYPE The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToPhysicalTable. That is, it effectively dis- associates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToPhysicalType object. The 'dynamic(3)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g., IPv4 ARP or the IPv6 Neighbor Discovery protocol. The 'static(4)' type indicates that the mapping has been statically configured. Both of these refer to entries that provide mappings for other entities addresses. The 'local(5)' type indicates that the mapping is provided for an entity's own interface address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage. | 1.3.6.1.2.1.4.35.1.6 | INTEGER {other(1), invalid(2), dynamic(3), static(4), local(5)} | read-create | current |
| ipNetToPhysicalState OBJECT-TYPE The Neighbor Unreachability Detection state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use (e.g. for IPv4), this object is always unknown(6). | 1.3.6.1.2.1.4.35.1.7 | INTEGER {reachable(1), stale(2), delay(3), probe(4), invalid(5), unknown(6), incomplete(7)} | read-only | current |
| ipNetToPhysicalRowStatus OBJECT-TYPE The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the ipNetToPhysicalPhysAddress object has been set. Note that if the ipNetToPhysicalType is set to 'invalid', the managed node may delete the entry independent of the state of this object. | 1.3.6.1.2.1.4.35.1.8 | RowStatus | read-create | current |
| ipv6ScopeZoneIndexTable OBJECT-TYPE The table used to describe IPv6 unicast and multicast scope zones. For those objects that have names rather than numbers, the names were chosen to coincide with the names used in the IPv6 address architecture document. | 1.3.6.1.2.1.4.36 | not-accessible | current | |
| ipv6ScopeZoneIndexEntry OBJECT-TYPE Each entry contains the list of scope identifiers on a given interface. | 1.3.6.1.2.1.4.36.1 | not-accessible | current | |
| ipv6ScopeZoneIndexIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which these scopes belong. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.36.1.1 | InterfaceIndex | not-accessible | current |
| ipv6ScopeZoneIndexLinkLocal OBJECT-TYPE The zone index for the link-local scope on this interface. | 1.3.6.1.2.1.4.36.1.2 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndex3 OBJECT-TYPE The zone index for scope 3 on this interface. | 1.3.6.1.2.1.4.36.1.3 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndexAdminLocal OBJECT-TYPE The zone index for the admin-local scope on this interface. | 1.3.6.1.2.1.4.36.1.4 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndexSiteLocal OBJECT-TYPE The zone index for the site-local scope on this interface. | 1.3.6.1.2.1.4.36.1.5 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndex6 OBJECT-TYPE The zone index for scope 6 on this interface. | 1.3.6.1.2.1.4.36.1.6 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndex7 OBJECT-TYPE The zone index for scope 7 on this interface. | 1.3.6.1.2.1.4.36.1.7 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndexOrganizationLocal OBJECT-TYPE The zone index for the organization-local scope on this interface. | 1.3.6.1.2.1.4.36.1.8 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndex9 OBJECT-TYPE The zone index for scope 9 on this interface. | 1.3.6.1.2.1.4.36.1.9 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndexA OBJECT-TYPE The zone index for scope A on this interface. | 1.3.6.1.2.1.4.36.1.10 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndexB OBJECT-TYPE The zone index for scope B on this interface. | 1.3.6.1.2.1.4.36.1.11 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndexC OBJECT-TYPE The zone index for scope C on this interface. | 1.3.6.1.2.1.4.36.1.12 | InetZoneIndex | read-only | current |
| ipv6ScopeZoneIndexD OBJECT-TYPE The zone index for scope D on this interface. | 1.3.6.1.2.1.4.36.1.13 | InetZoneIndex | read-only | current |
| ipDefaultRouterTable OBJECT-TYPE The table used to describe the default routers known to this entity. | 1.3.6.1.2.1.4.37 | not-accessible | current | |
| ipDefaultRouterEntry OBJECT-TYPE Each entry contains information about a default router known to this entity. | 1.3.6.1.2.1.4.37.1 | not-accessible | current | |
| ipDefaultRouterAddressType OBJECT-TYPE The address type for this row. | 1.3.6.1.2.1.4.37.1.1 | InetAddressType | not-accessible | current |
| ipDefaultRouterAddress OBJECT-TYPE The IP address of the default router represented by this row. The address type of this object is specified in ipDefaultRouterAddressType. Implementers need to be aware that if the size of ipDefaultRouterAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.4.37.1.2 | InetAddress | not-accessible | current |
| ipDefaultRouterIfIndex OBJECT-TYPE The index value that uniquely identifies the interface by which the router can be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.37.1.3 | InterfaceIndex | not-accessible | current |
| ipDefaultRouterLifetime OBJECT-TYPE The remaining length of time, in seconds, that this router will continue to be useful as a default router. A value of zero indicates that it is no longer useful as a default router. It is left to the implementer of the MIB as to whether a router with a lifetime of zero is removed from the list. For IPv6, this value should be extracted from the router advertisement messages. | 1.3.6.1.2.1.4.37.1.4 | Unsigned32 (0..65535) | read-only | current |
| ipDefaultRouterPreference OBJECT-TYPE An indication of preference given to this router as a default router as described in he Default Router Preferences document. Treating the value as a 2 bit signed integer allows for simple arithmetic comparisons. For IPv4 routers or IPv6 routers that are not using the updated router advertisement format, this object is set to medium (0). | 1.3.6.1.2.1.4.37.1.5 | INTEGER {reserved(-2), low(-1), medium(0), high(1)} | read-only | current |
| ipv6RouterAdvertSpinLock OBJECT-TYPE An advisory lock used to allow cooperating SNMP managers to coordinate their use of the set operation in creating or modifying rows within this table. In order to use this lock to coordinate the use of set operations, managers should first retrieve ipv6RouterAdvertSpinLock. They should then determine the appropriate row to create or modify. Finally, they should issue the appropriate set command including the retrieved value of ipv6RouterAdvertSpinLock. If another manager has altered the table in the meantime, then the value of ipv6RouterAdvertSpinLock will have changed and the creation will fail as it will be specifying an incorrect value for ipv6RouterAdvertSpinLock. It is suggested, but not required, that the ipv6RouterAdvertSpinLock be the first var bind for each set of objects representing a 'row' in a PDU. | 1.3.6.1.2.1.4.38 | TestAndIncr | read-write | current |
| ipv6RouterAdvertTable OBJECT-TYPE The table containing information used to construct router advertisements. | 1.3.6.1.2.1.4.39 | not-accessible | current | |
| ipv6RouterAdvertEntry OBJECT-TYPE An entry containing information used to construct router advertisements. Information in this table is persistent, and when this object is written, the entity SHOULD save the change to non-volatile storage. | 1.3.6.1.2.1.4.39.1 | not-accessible | current | |
| ipv6RouterAdvertIfIndex OBJECT-TYPE The index value that uniquely identifies the interface on which router advertisements constructed with this information will be transmitted. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.2.1.4.39.1.1 | InterfaceIndex | not-accessible | current |
| ipv6RouterAdvertSendAdverts OBJECT-TYPE A flag indicating whether the router sends periodic router advertisements and responds to router solicitations on this interface. | 1.3.6.1.2.1.4.39.1.2 | TruthValue | read-create | current |
| ipv6RouterAdvertMaxInterval OBJECT-TYPE The maximum time allowed between sending unsolicited router advertisements from this interface. | 1.3.6.1.2.1.4.39.1.3 | Unsigned32 (4..1800) | read-create | current |
| ipv6RouterAdvertMinInterval OBJECT-TYPE The minimum time allowed between sending unsolicited router advertisements from this interface. The default is 0.33 * ipv6RouterAdvertMaxInterval, however, in the case of a low value for ipv6RouterAdvertMaxInterval, the minimum value for this object is restricted to 3. | 1.3.6.1.2.1.4.39.1.4 | Unsigned32 (3..1350) | read-create | current |
| ipv6RouterAdvertManagedFlag OBJECT-TYPE The true/false value to be placed into the 'managed address configuration' flag field in router advertisements sent from this interface. | 1.3.6.1.2.1.4.39.1.5 | TruthValue | read-create | current |
| ipv6RouterAdvertOtherConfigFlag OBJECT-TYPE The true/false value to be placed into the 'other stateful configuration' flag field in router advertisements sent from this interface. | 1.3.6.1.2.1.4.39.1.6 | TruthValue | read-create | current |
| ipv6RouterAdvertLinkMTU OBJECT-TYPE The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent. | 1.3.6.1.2.1.4.39.1.7 | Unsigned32 | read-create | current |
| ipv6RouterAdvertReachableTime OBJECT-TYPE The value to be placed in the reachable time field in router advertisement messages sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for reachable time. | 1.3.6.1.2.1.4.39.1.8 | Unsigned32 (0..3600000) | read-create | current |
| ipv6RouterAdvertRetransmitTime OBJECT-TYPE The value to be placed in the retransmit timer field in router advertisements sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for retrans time. | 1.3.6.1.2.1.4.39.1.9 | Unsigned32 | read-create | current |
| ipv6RouterAdvertCurHopLimit OBJECT-TYPE The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for curHopLimit. The default should be set to the value specified in the IANA web pages (www.iana.org) at the time of implementation. | 1.3.6.1.2.1.4.39.1.10 | Unsigned32 (0..255) | read-create | current |
| ipv6RouterAdvertDefaultLifetime OBJECT-TYPE The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between ipv6RouterAdvertMaxInterval and 9000 seconds. A value of zero indicates that the router is not to be used as a default router. The default is 3 * ipv6RouterAdvertMaxInterval. | 1.3.6.1.2.1.4.39.1.11 | Unsigned32 (0 | 4..9000) | read-create | current |
| ipv6RouterAdvertRowStatus OBJECT-TYPE The status of this conceptual row. As all objects in this conceptual row have default values, a row can be created and made active by setting this object appropriately. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. | 1.3.6.1.2.1.4.39.1.12 | RowStatus | read-create | current |
| icmp OBJECT-IDENTITY | 1.3.6.1.2.1.5 | |||
| icmpInMsgs OBJECT-TYPE The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by icmpStatsInMsgs. | 1.3.6.1.2.1.5.1 | Counter32 | read-only | deprecated |
| icmpInErrors OBJECT-TYPE The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by icmpStatsInErrors. | 1.3.6.1.2.1.5.2 | Counter32 | read-only | deprecated |
| icmpInDestUnreachs OBJECT-TYPE The number of ICMP Destination Unreachable messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.3 | Counter32 | read-only | deprecated |
| icmpInTimeExcds OBJECT-TYPE The number of ICMP Time Exceeded messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.4 | Counter32 | read-only | deprecated |
| icmpInParmProbs OBJECT-TYPE The number of ICMP Parameter Problem messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.5 | Counter32 | read-only | deprecated |
| icmpInSrcQuenchs OBJECT-TYPE The number of ICMP Source Quench messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.6 | Counter32 | read-only | deprecated |
| icmpInRedirects OBJECT-TYPE The number of ICMP Redirect messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.7 | Counter32 | read-only | deprecated |
| icmpInEchos OBJECT-TYPE The number of ICMP Echo (request) messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.8 | Counter32 | read-only | deprecated |
| icmpInEchoReps OBJECT-TYPE The number of ICMP Echo Reply messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.9 | Counter32 | read-only | deprecated |
| icmpInTimestamps OBJECT-TYPE The number of ICMP Timestamp (request) messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.10 | Counter32 | read-only | deprecated |
| icmpInTimestampReps OBJECT-TYPE The number of ICMP Timestamp Reply messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.11 | Counter32 | read-only | deprecated |
| icmpInAddrMasks OBJECT-TYPE The number of ICMP Address Mask Request messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.12 | Counter32 | read-only | deprecated |
| icmpInAddrMaskReps OBJECT-TYPE The number of ICMP Address Mask Reply messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.13 | Counter32 | read-only | deprecated |
| icmpOutMsgs OBJECT-TYPE The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by icmpStatsOutMsgs. | 1.3.6.1.2.1.5.14 | Counter32 | read-only | deprecated |
| icmpOutErrors OBJECT-TYPE The number of ICMP messages which this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP layer, such as the inability of IP to route the resultant datagram. In some implementations, there may be no types of error which contribute to this counter's value. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by icmpStatsOutErrors. | 1.3.6.1.2.1.5.15 | Counter32 | read-only | deprecated |
| icmpOutDestUnreachs OBJECT-TYPE The number of ICMP Destination Unreachable messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.16 | Counter32 | read-only | deprecated |
| icmpOutTimeExcds OBJECT-TYPE The number of ICMP Time Exceeded messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.17 | Counter32 | read-only | deprecated |
| icmpOutParmProbs OBJECT-TYPE The number of ICMP Parameter Problem messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.18 | Counter32 | read-only | deprecated |
| icmpOutSrcQuenchs OBJECT-TYPE The number of ICMP Source Quench messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.19 | Counter32 | read-only | deprecated |
| icmpOutRedirects OBJECT-TYPE The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.20 | Counter32 | read-only | deprecated |
| icmpOutEchos OBJECT-TYPE The number of ICMP Echo (request) messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.21 | Counter32 | read-only | deprecated |
| icmpOutEchoReps OBJECT-TYPE The number of ICMP Echo Reply messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.22 | Counter32 | read-only | deprecated |
| icmpOutTimestamps OBJECT-TYPE The number of ICMP Timestamp (request) messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.23 | Counter32 | read-only | deprecated |
| icmpOutTimestampReps OBJECT-TYPE The number of ICMP Timestamp Reply messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.24 | Counter32 | read-only | deprecated |
| icmpOutAddrMasks OBJECT-TYPE The number of ICMP Address Mask Request messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.25 | Counter32 | read-only | deprecated |
| icmpOutAddrMaskReps OBJECT-TYPE The number of ICMP Address Mask Reply messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable. | 1.3.6.1.2.1.5.26 | Counter32 | read-only | deprecated |
| icmpStatsTable OBJECT-TYPE The table of generic system-wide ICMP counters. | 1.3.6.1.2.1.5.29 | not-accessible | current | |
| icmpStatsEntry OBJECT-TYPE A conceptual row in the icmpStatsTable. | 1.3.6.1.2.1.5.29.1 | not-accessible | current | |
| icmpStatsIPVersion OBJECT-TYPE The IP version of the statistics. | 1.3.6.1.2.1.5.29.1.1 | InetVersion | not-accessible | current |
| icmpStatsInMsgs OBJECT-TYPE The total number of ICMP messages that the entity received. Note that this counter includes all those counted by icmpStatsInErrors. | 1.3.6.1.2.1.5.29.1.2 | Counter32 | read-only | current |
| icmpStatsInErrors OBJECT-TYPE The number of ICMP messages that the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). | 1.3.6.1.2.1.5.29.1.3 | Counter32 | read-only | current |
| icmpStatsOutMsgs OBJECT-TYPE The total number of ICMP messages that the entity attempted to send. Note that this counter includes all those counted by icmpStatsOutErrors. | 1.3.6.1.2.1.5.29.1.4 | Counter32 | read-only | current |
| icmpStatsOutErrors OBJECT-TYPE The number of ICMP messages that this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP layer, such as the inability of IP to route the resultant datagram. In some implementations, there may be no types of error that contribute to this counter's value. | 1.3.6.1.2.1.5.29.1.5 | Counter32 | read-only | current |
| icmpMsgStatsTable OBJECT-TYPE The table of system-wide per-version, per-message type ICMP counters. | 1.3.6.1.2.1.5.30 | not-accessible | current | |
| icmpMsgStatsEntry OBJECT-TYPE A conceptual row in the icmpMsgStatsTable. The system should track each ICMP type value, even if that ICMP type is not supported by the system. However, a given row need not be instantiated unless a message of that type has been processed, i.e., the row for icmpMsgStatsType=X MAY be instantiated before but MUST be instantiated after the first message with Type=X is received or transmitted. After receiving or transmitting any succeeding messages with Type=X, the relevant counter must be incremented. | 1.3.6.1.2.1.5.30.1 | not-accessible | current | |
| icmpMsgStatsIPVersion OBJECT-TYPE The IP version of the statistics. | 1.3.6.1.2.1.5.30.1.1 | InetVersion | not-accessible | current |
| icmpMsgStatsType OBJECT-TYPE The ICMP type field of the message type being counted by this row. Note that ICMP message types are scoped by the address type in use. | 1.3.6.1.2.1.5.30.1.2 | Integer32 (0..255) | not-accessible | current |
| icmpMsgStatsInPkts OBJECT-TYPE The number of input packets for this AF and type. | 1.3.6.1.2.1.5.30.1.3 | Counter32 | read-only | current |
| icmpMsgStatsOutPkts OBJECT-TYPE The number of output packets for this AF and type. | 1.3.6.1.2.1.5.30.1.4 | Counter32 | read-only | current |
| ipMIBConformance OBJECT-IDENTITY | 1.3.6.1.2.1.48.2 | |||
| ipMIBCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.48.2.1 | |||
| ipMIBGroups OBJECT-IDENTITY | 1.3.6.1.2.1.48.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ipMIBCompliance MODULE-COMPLIANCE The compliance statement for systems that implement only IPv4. For version-independence, this compliance statement is deprecated in favor of ipMIBCompliance2. | 1.3.6.1.2.1.48.2.1.1 | deprecated |
| ipMIBCompliance2 MODULE-COMPLIANCE The compliance statement for systems that implement IP - either IPv4 or IPv6. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which we have the following compliance requirements, expressed in OBJECT clause form in this description clause: -- OBJECT ipSystemStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT ipIfStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT icmpStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT icmpMsgStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT ipAddressPrefixType -- SYNTAX InetAddressType {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only global IPv4 and -- IPv6 address types. -- -- OBJECT ipAddressPrefixPrefix -- SYNTAX InetAddress (Size(4 | 16)) -- DESCRIPTION -- This MIB requires support for only global IPv4 and -- IPv6 addresses and so the size can be either 4 or -- 16 bytes. -- -- OBJECT ipAddressAddrType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipAddressAddr -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. -- -- OBJECT ipNetToPhysicalNetAddressType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipNetToPhysicalNetAddress -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. -- -- OBJECT ipDefaultRouterAddressType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipDefaultRouterAddress -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. | 1.3.6.1.2.1.48.2.1.2 | current |
| ipGroup OBJECT-GROUP The ip group of objects providing for basic management of IP entities, exclusive of the management of IP routes. As part of the version independence, this group has been deprecated. | 1.3.6.1.2.1.48.2.2.1 | deprecated |
| icmpGroup OBJECT-GROUP The icmp group of objects providing ICMP statistics. As part of the version independence, this group has been deprecated. | 1.3.6.1.2.1.48.2.2.2 | deprecated |
| ipv4GeneralGroup OBJECT-GROUP The group of IPv4-specific objects for basic management of IPv4 entities. | 1.3.6.1.2.1.48.2.2.3 | current |
| ipv4IfGroup OBJECT-GROUP The group of IPv4-specific objects for basic management of IPv4 interfaces. | 1.3.6.1.2.1.48.2.2.4 | current |
| ipv6GeneralGroup2 OBJECT-GROUP The IPv6 group of objects providing for basic management of IPv6 entities. | 1.3.6.1.2.1.48.2.2.5 | current |
| ipv6IfGroup OBJECT-GROUP The group of IPv6-specific objects for basic management of IPv6 interfaces. | 1.3.6.1.2.1.48.2.2.6 | current |
| ipLastChangeGroup OBJECT-GROUP The last change objects associated with this MIB. These objects are optional for all agents. They SHOULD be implemented on agents where it is possible to determine the proper values. Where it is not possible to determine the proper values, for example when the tables are split amongst several sub-agents using AgentX, the agent MUST NOT implement these objects to return an incorrect or static value. | 1.3.6.1.2.1.48.2.2.7 | current |
| ipSystemStatsGroup OBJECT-GROUP IP system wide statistics. | 1.3.6.1.2.1.48.2.2.8 | current |
| ipv4SystemStatsGroup OBJECT-GROUP IPv4 only system wide statistics. | 1.3.6.1.2.1.48.2.2.9 | current |
| ipSystemStatsHCOctetGroup OBJECT-GROUP IP system wide statistics for systems that may overflow the standard octet counters within 1 hour. | 1.3.6.1.2.1.48.2.2.10 | current |
| ipSystemStatsHCPacketGroup OBJECT-GROUP IP system wide statistics for systems that may overflow the standard packet counters within 1 hour. | 1.3.6.1.2.1.48.2.2.11 | current |
| ipv4SystemStatsHCPacketGroup OBJECT-GROUP IPv4 only system wide statistics for systems that may overflow the standard packet counters within 1 hour. | 1.3.6.1.2.1.48.2.2.12 | current |
| ipIfStatsGroup OBJECT-GROUP IP per-interface statistics. | 1.3.6.1.2.1.48.2.2.13 | current |
| ipv4IfStatsGroup OBJECT-GROUP IPv4 only per-interface statistics. | 1.3.6.1.2.1.48.2.2.14 | current |
| ipIfStatsHCOctetGroup OBJECT-GROUP IP per-interfaces statistics for systems that include interfaces that may overflow the standard octet counters within 1 hour. | 1.3.6.1.2.1.48.2.2.15 | current |
| ipIfStatsHCPacketGroup OBJECT-GROUP IP per-interfaces statistics for systems that include interfaces that may overflow the standard packet counters within 1 hour. | 1.3.6.1.2.1.48.2.2.16 | current |
| ipv4IfStatsHCPacketGroup OBJECT-GROUP IPv4 only per-interface statistics for systems that include interfaces that may overflow the standard packet counters within 1 hour. | 1.3.6.1.2.1.48.2.2.17 | current |
| ipAddressPrefixGroup OBJECT-GROUP The group of objects for providing information about address prefixes used by this node. | 1.3.6.1.2.1.48.2.2.18 | current |
| ipAddressGroup OBJECT-GROUP The group of objects for providing information about the addresses relevant to this entity's interfaces. | 1.3.6.1.2.1.48.2.2.19 | current |
| ipNetToPhysicalGroup OBJECT-GROUP The group of objects for providing information about the mappings of network address to physical address known to this node. | 1.3.6.1.2.1.48.2.2.20 | current |
| ipv6ScopeGroup OBJECT-GROUP The group of objects for managing IPv6 scope zones. | 1.3.6.1.2.1.48.2.2.21 | current |
| ipDefaultRouterGroup OBJECT-GROUP The group of objects for providing information about default routers known to this node. | 1.3.6.1.2.1.48.2.2.22 | current |
| ipv6RouterAdvertGroup OBJECT-GROUP The group of objects for controlling information advertised by IPv6 routers. | 1.3.6.1.2.1.48.2.2.23 | current |
| icmpStatsGroup OBJECT-GROUP The group of objects providing ICMP statistics. | 1.3.6.1.2.1.48.2.2.24 | current |