MIBs Depot

RADWARE-MIB

Registered at
1.3.6.1.4.1.89.4
1.3.6.1.4.1.89.12
1.3.6.1.4.1.89.16
1.3.6.1.4.1.89.27
1.3.6.1.4.1.89.28
1.3.6.1.4.1.89.29.8.7
1.3.6.1.4.1.89.29.8.8
1.3.6.1.4.1.89.30
1.3.6.1.4.1.89.35.1
1.3.6.1.4.1.89.35.3
Namespace
radware
Source file
RADWARE-MIB
Digest
sha256:4c15021c5096c11c9ab52a22adc3751750867a4b2226d17f666ff747de2de285

Imports

FromSymbols
IP-MIBipAddrEntry
IPV6-TCIpv6Address
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IP-MIB
IPV6-TC
RADWARE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
BitFlag
type
FeatureStatus
type
NetNumber
type
RouteTag
type
RowStatus
type
RsIfType
type
TruthValue
type
VrId
type

Objects

NameOIDSyntaxAccessStatus
rnd
OBJECT-IDENTITY
1.3.6.1.4.1.89
rndMng
OBJECT-IDENTITY
1.3.6.1.4.1.89.1
rndSysId
OBJECT-TYPE
Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II.
1.3.6.1.4.1.89.1.1INTEGER {reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), lte(9), iprouter(10), ielb(11), leb(12), openGate12(13), openGate4(14), ran(15), itlb(16), gatelinx(17), openGate2(18), ogRanTR(19), stc(20), ftc(21), armon(22), fccs1004(23), fccs1012(24), rdapter(25), ogvan(26), wanGate(27), ogRubE(28), ogRubT(29), elX(30), vGate4(31), mrt(32), ogSrubET(33), vanXS(34), lre(35), vGate2(36), serverDispatcher4(37), serverDispatcher2(38), vGate2Fast(39), serverDispatcher2Fast(40), prt(41), mlm(42), prt11(43), quickOffice(44), apollo(45), radware(62)}read-onlymandatory
rndAction
OBJECT-TYPE
This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol.
1.3.6.1.4.1.89.1.2INTEGER {reset(1), sendNetworkTab(2), deleteNetworkTab(3), sendRoutingTab(4), deleteRoutingTab(5), sendLanTab(6), deleteLanTab(7), deleteArpTab(8), sendArpTab(9), deleteRouteTab(10), sendRouteTab(11), backupSPFRoutingTab(12), backupIPRoutingTab(13), backupNetworkTab(14), backupLanTab(15), backupArpTab(16), backupIPXRipTab(17), backupIPXSAPTab(18), resetCDB(19), eraseCDB(20), deleteZeroHopRoutingAllocTab(21), shutdown(22)}read-writemandatory
rndFileName
OBJECT-TYPE
The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.
1.3.6.1.4.1.89.1.3OCTET STRINGread-writemandatory
removeViewTablePermissionReductionCheck
OBJECT-TYPE
This is a True/False variable that determines whether the user is able to change his own view permissions (originally it wasn't allowed in order to prevent situations of permission reduction). added for Fortis.
1.3.6.1.4.1.89.1.4INTEGER {disabled(0), enabled(1)}read-writemandatory
rsConfigurationAuditStatus
OBJECT-TYPE
Enable/Disable audit notifications.
1.3.6.1.4.1.89.1.5INTEGER {enable(1), disable(2)}read-writemandatory
rdwrPrintToLogAndCli
OBJECT-TYPE
print to system log file and to the CLI
1.3.6.1.4.1.89.1.6DisplayString (SIZE(1..100))read-writemandatory
rdwrClearTheLogFile
OBJECT-TYPE
Clears the system log file
1.3.6.1.4.1.89.1.7INTEGER {clearSysLog(1)}read-writemandatory
rdwrAutoRowGenerationStatus
OBJECT-TYPE
Enable/Disable automatic generation of rows by device
1.3.6.1.4.1.89.1.8INTEGER {enable(1), disable(2)}read-writemandatory
rsConfigurationAuditingType
OBJECT-TYPE
Sets audit notifications type.
1.3.6.1.4.1.89.1.9INTEGER {regular(1), extended(2)}read-writemandatory
rndDeviceParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.2
rndBridgeType
OBJECT-TYPE
Identification of the RND bridge type.
1.3.6.1.4.1.89.2.1INTEGER {reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), tre(9), rtre(10), xtb(11), ete(12), rete(13), ielb(30), leb(31), openGate12(32), openGate4(33), ran(34), itlb(35), gatelinx(36), openGate2(37), ogRanTR(38), rdapter(39), ogVan(40), wanGate(41), ogRubE(42), ogRubT(43), wanGateI(44), vGate4(45), lre(46), mrt(47), vGate2(48)}read-onlymandatory
rndInactiveArpTimeOut
OBJECT-TYPE
This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
1.3.6.1.4.1.89.2.2INTEGERread-writemandatory
rndBridgeAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.3
rndErrorDesc
OBJECT-TYPE
A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
1.3.6.1.4.1.89.2.3.1DisplayStringread-onlymandatory
rndErrorSeverity
OBJECT-TYPE
The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
1.3.6.1.4.1.89.2.3.2INTEGERread-onlymandatory
rndBrgVersion
OBJECT-TYPE
The application software version.
1.3.6.1.4.1.89.2.4DisplayStringread-writemandatory
rndBrgFeatures
OBJECT-TYPE
A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server
1.3.6.1.4.1.89.2.5OCTET STRINGread-onlymandatory
rndBrgLicense
OBJECT-TYPE
This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
1.3.6.1.4.1.89.2.6OCTET STRINGread-writemandatory
rndIpHost
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.7
rndICMPTransmitionEnable
OBJECT-TYPE
This variable controlls the ability to transmit ICMP frames
1.3.6.1.4.1.89.2.7.1INTEGER {enable(1), disable(2)}read-writemandatory
rndCommunityTable
OBJECT-TYPE
The community table of the agent
1.3.6.1.4.1.89.2.7.2not-accessiblemandatory
rndCommunityEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.2.7.2.1not-accessiblemandatory
rndCommunityMngStationAddr
OBJECT-TYPE
The management station that will be allowed to communicate with the agent IP address
1.3.6.1.4.1.89.2.7.2.1.1IpAddressread-writemandatory
rndCommunityString
OBJECT-TYPE
The community string with which the management station will communicate with the agent
1.3.6.1.4.1.89.2.7.2.1.2DisplayString (SIZE(1..20))read-writemandatory
rndCommunityAccess
OBJECT-TYPE
The allowed access to this management station
1.3.6.1.4.1.89.2.7.2.1.3INTEGER {readOnly(1), readWrite(2), super(3)}read-writemandatory
rndCommunityTrapsEnable
OBJECT-TYPE
Should the agent send traps to the management station
1.3.6.1.4.1.89.2.7.2.1.4INTEGER {trapsEnable(1), trapsDisable(2)}read-writemandatory
rndCommunityStatus
OBJECT-TYPE
The status of this entry. If the status is invalid the community entry will be deleted
1.3.6.1.4.1.89.2.7.2.1.5INTEGER {enable(1), invalid(2)}read-writemandatory
rndManagedTime
OBJECT-TYPE
The time will be sent in the format hhmmss
1.3.6.1.4.1.89.2.8DisplayString (SIZE(6))read-writemandatory
rndManagedDate
OBJECT-TYPE
The date will be sent in the format ddmmyyyy
1.3.6.1.4.1.89.2.9DisplayString (SIZE(6..8))read-writemandatory
genGroup
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.11
genGroupHWVersion
OBJECT-TYPE
Defines the HW version of the product.
1.3.6.1.4.1.89.2.11.1DisplayStringread-onlymandatory
genGroupConfigurationSymbol
OBJECT-TYPE
Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
1.3.6.1.4.1.89.2.11.2DisplayString (SIZE(1))read-onlymandatory
genGroupHWStatus
OBJECT-TYPE
This attribute describes the status of the group hardware as detected by the sensors software.
1.3.6.1.4.1.89.2.11.3INTEGER {ok(1), hardwareProblems(2), notSupported(255)}read-onlymandatory
rndSerialNumber
OBJECT-TYPE
The device's serial number. This parameter is sent with the device configuration but will not be set when the configuration is uploaded to the device.
1.3.6.1.4.1.89.2.12DisplayString (SIZE(0..30))read-writemandatory
rndApsoluteOSVersion
OBJECT-TYPE
The ApsoluteOS version.
1.3.6.1.4.1.89.2.13DisplayString (SIZE(0..255))read-onlymandatory
rdwrDeviceType
OBJECT-TYPE
The Device Type.
1.3.6.1.4.1.89.2.14DisplayString (SIZE(0..255))read-onlymandatory
rdwrDeviceNumberOfPorts
OBJECT-TYPE
The Device Number of Ports.
1.3.6.1.4.1.89.2.15INTEGERread-onlymandatory
rdwrDevicePortsConfig
OBJECT-TYPE
The Device Ports Configuration.
1.3.6.1.4.1.89.2.16DisplayString (SIZE(0..255))read-onlymandatory
rdwrDeviceThroughput
OBJECT-TYPE
The Device Throughput.
1.3.6.1.4.1.89.2.17DisplayString (SIZE(0..255))read-onlymandatory
rdwrDeviceNetworkDriver
OBJECT-TYPE
The Device Network Driver.
1.3.6.1.4.1.89.2.18DisplayString (SIZE(0..255))read-onlymandatory
rdwrDeviceCPUsNumber
OBJECT-TYPE
The Device number of CPU's.
1.3.6.1.4.1.89.2.19INTEGERread-onlymandatory
rdwrDeviceActiveBoot
OBJECT-TYPE
The Device Active Boot.
1.3.6.1.4.1.89.2.20DisplayString (SIZE(0..255))read-onlymandatory
rdwrDeviceSecondaryBoot
OBJECT-TYPE
The Device Secondary Boot.
1.3.6.1.4.1.89.2.21DisplayString (SIZE(0..255))read-onlymandatory
rndInterface
OBJECT-IDENTITY
1.3.6.1.4.1.89.4
rndIfTable
OBJECT-TYPE
RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
1.3.6.1.4.1.89.4.1not-accessiblemandatory
rndIfEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.4.1.1not-accessiblemandatory
rndIfIndex
OBJECT-TYPE
Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
1.3.6.1.4.1.89.4.1.1.1INTEGERread-onlymandatory
rndIfBoardNum
OBJECT-TYPE
The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
1.3.6.1.4.1.89.4.1.1.2INTEGERread-onlymandatory
rndIfNetAddress
OBJECT-TYPE
The IP address of the interface defined by the particular value of rndIfIndex.
1.3.6.1.4.1.89.4.1.1.3IpAddressread-onlymandatory
rndIfStatus
OBJECT-TYPE
The current status of the interface.
1.3.6.1.4.1.89.4.1.1.4INTEGER {ok(1), okSingleBrg(2), okMultiBrg(3), connctFault(4), rxFault(5), txFault(6), channelLoopback(7), rxClockFault(8), t1Alarm(9)}read-onlymandatory
rndIfClockType
OBJECT-TYPE
rndIfClockType defines the type of clock each interface uses: internal or external.
1.3.6.1.4.1.89.4.1.1.5INTEGER {external(1), internal(2), t1(3), g703(4)}read-writemandatory
rndIfBaudRate
OBJECT-TYPE
Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
1.3.6.1.4.1.89.4.1.1.6INTEGERread-writemandatory
rndIfCost
OBJECT-TYPE
This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
1.3.6.1.4.1.89.4.1.1.7INTEGERread-writemandatory
rndIfCompression
OBJECT-TYPE
Defines whether data compression is enabled or disabled for the interface.
1.3.6.1.4.1.89.4.1.1.8INTEGER {enable(1), disable(2)}read-writemandatory
rndIfCompressionStatus
OBJECT-TYPE
Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.
1.3.6.1.4.1.89.4.1.1.9INTEGER {not-inserted(1), active(2), not-active(3), disable(4)}read-onlymandatory
rndIfCompressionRate
OBJECT-TYPE
Percentage of compression. This variable applies only if rndCompressionStatus is active.
1.3.6.1.4.1.89.4.1.1.10INTEGERread-onlymandatory
rndIfLATCompression
OBJECT-TYPE
Enable/Disable the LAT Compression.
1.3.6.1.4.1.89.4.1.1.11INTEGER {enable(1), disable(2)}read-writemandatory
rndIfCompressionType
OBJECT-TYPE
This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps.
1.3.6.1.4.1.89.4.1.1.12INTEGER {none(1), lowSpeed(2), highSpeed(3)}read-onlymandatory
rndIfFilterMode
OBJECT-TYPE
This parameter indicates the type of filtering in the device.
1.3.6.1.4.1.89.4.1.1.13INTEGER {destinationOnly(1), sourceAndDestination(2), none(3)}read-writemandatory
rndIfChannelType
OBJECT-TYPE
The type of the WAN channel
1.3.6.1.4.1.89.4.1.1.14INTEGER {wanChannel(1), ogRanPort(2), routerToBridge(3), spsFramRelay(4), dialBackup(5), snar(6), lan(7), spsX25(8), frameRelay1490(9), frameRelay1490CAR(10), frameRelayCAR(11), ppp(12)}read-writemandatory
rndIfBridge
OBJECT-TYPE
This variable indicates whether this interface forward Layer II pakages.
1.3.6.1.4.1.89.4.1.1.15INTEGER {enable(1), disable(2)}read-writemandatory
rndHighPriorityIf
OBJECT-TYPE
This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager.
1.3.6.1.4.1.89.4.1.1.16INTEGER {enable(1), disable(2)}read-writemandatory
rndWanHeader
OBJECT-TYPE
This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family.
1.3.6.1.4.1.89.4.1.1.17INTEGER {regular(1), short(2)}read-writemandatory
rndDuplexMode
OBJECT-TYPE
This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode.
1.3.6.1.4.1.89.4.1.1.18INTEGER {half(1), full(2)}read-writemandatory
rndIPX
OBJECT-IDENTITY
1.3.6.1.4.1.89.12
rndFACS
OBJECT-IDENTITY
1.3.6.1.4.1.89.16
rndFACSDefaultAction
OBJECT-TYPE
Used to define the default action for the device, when no FACS statements applicable to a given frame are defined.
1.3.6.1.4.1.89.16.1INTEGER {block(1), forward(2), enable(3), disable(4), blockAndReport(129)}read-writemandatory
rndFACSActTable
OBJECT-TYPE
The table of FACS action.
1.3.6.1.4.1.89.16.2not-accessiblemandatory
rndFACSActEntry
OBJECT-TYPE
Each rndFACSActEntry consist of the following parameters
1.3.6.1.4.1.89.16.2.1not-accessiblemandatory
rndFACSActType
OBJECT-TYPE
This parameter indicate on which FACS Table the FACS action will preform.
1.3.6.1.4.1.89.16.2.1.1INTEGER {tx(1), rx(2), activeDB(4), tempDB(5)}read-onlymandatory
rndFACSActIfIndex
OBJECT-TYPE
The interface to which this FACS entry is applicable.
1.3.6.1.4.1.89.16.2.1.2INTEGERread-onlymandatory
rndFACSAction
OBJECT-TYPE
The management station that sends a SET request for one of these actions with indexes rndFACSType and rndFACSIfIndex defines the type and the interface Id for which all FACS statements are to be erased. If no interface or no type is specified, all FACS statements for a protocol are erased.
1.3.6.1.4.1.89.16.2.1.3INTEGER {none(1), eraseIP(2), eraseDECnet(3), eraseIPX(4), eraseBrg(5), replaceIP(6), replaceIPX(8), replaceBrg(9), backupIP(10), backupIPX(12), backupBrg(13)}read-writemandatory
rndFACSTable
OBJECT-TYPE
The table of FACS statment.
1.3.6.1.4.1.89.16.3not-accessiblemandatory
rndFACSEntry
OBJECT-TYPE
Each FACS statment consist of the following parameters
1.3.6.1.4.1.89.16.3.1not-accessiblemandatory
rndFACSIfIndex
OBJECT-TYPE
The interface to which this FACS entry is applicable.
1.3.6.1.4.1.89.16.3.1.1INTEGERread-onlymandatory
rndFACSProtocolType
OBJECT-TYPE
This parameter define the protocol the Security Access Control is applicable.
1.3.6.1.4.1.89.16.3.1.2INTEGER {ip(1), ipx(2), dec(3), bridge(4)}read-onlymandatory
rndFACSType
OBJECT-TYPE
The Mode of in which this FACS statement operates.
1.3.6.1.4.1.89.16.3.1.3INTEGER {tx(1), rx(2), cod(3), activeDB(4), tempDB(5)}read-onlymandatory
rndFACSIndex
OBJECT-TYPE
Index to the FACS Table.
1.3.6.1.4.1.89.16.3.1.4INTEGERread-onlymandatory
rndFACSSrcAdd
OBJECT-TYPE
The size of the octet string will be according to the protocol type define in rndFACSProtocolType.
1.3.6.1.4.1.89.16.3.1.5OCTET STRINGread-writemandatory
rndFACSSrcAddMask
OBJECT-TYPE
Source-address mask .
1.3.6.1.4.1.89.16.3.1.6OCTET STRINGread-writemandatory
rndFACSDesAdd
OBJECT-TYPE
Destination-address The size of the octet string will be according to the protocol type define in rndFACSProtocolType .
1.3.6.1.4.1.89.16.3.1.7OCTET STRINGread-writemandatory
rndFACSDesAddMask
OBJECT-TYPE
Destination-address mask .
1.3.6.1.4.1.89.16.3.1.8OCTET STRINGread-writemandatory
rndFACSOperation
OBJECT-TYPE
... .
1.3.6.1.4.1.89.16.3.1.9INTEGER {block(1), forward(2), permit(3), deny(4), blockZHRP(5), blockAndReport(129)}read-writemandatory
rndFACSNetFiltering
OBJECT-TYPE
... .
1.3.6.1.4.1.89.16.3.1.10INTEGER {none(1), l2multicast(2), arp(3), icmp(4), ip(5), udp(6), tcp(7), decnet(8), ipx(9)}read-writemandatory
rndFACSSoketNum
OBJECT-TYPE
Port/socket number for different applications 0 is default meaning not applicable.
1.3.6.1.4.1.89.16.3.1.11INTEGERread-writemandatory
rndFACSMask1Id
OBJECT-TYPE
Index into RND mask table FACS/COD Type) .
1.3.6.1.4.1.89.16.3.1.12INTEGERread-writemandatory
rndFACSMask2Id
OBJECT-TYPE
Index into RND mask table FACS/COD according to the value of rndFACSType .
1.3.6.1.4.1.89.16.3.1.13INTEGERread-writemandatory
rndFACSStatus
OBJECT-TYPE
The status of a table entry.
1.3.6.1.4.1.89.16.3.1.14INTEGER {valid(1), createRequest(2), underCreation(3), invalid(4)}read-writemandatory
rndBootP
OBJECT-IDENTITY
1.3.6.1.4.1.89.24
rndBootPServerAddress
OBJECT-TYPE
The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0.
1.3.6.1.4.1.89.24.1IpAddressread-writemandatory
rndBootPRelaySecThreshold
OBJECT-TYPE
BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first.
1.3.6.1.4.1.89.24.2INTEGERread-writemandatory
ipSpec
OBJECT-IDENTITY
1.3.6.1.4.1.89.26
rsIpAddrTable
OBJECT-TYPE
This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
1.3.6.1.4.1.89.26.1not-accessiblemandatory
rsIpAddrEntry
OBJECT-TYPE
The addressing information for one of this entity's IP addresses.
1.3.6.1.4.1.89.26.1.1not-accessiblemandatory
rsIpAdEntAddr
OBJECT-TYPE
The IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.89.26.1.1.1IpAddressread-onlymandatory
rsIpAdEntIfIndex
OBJECT-TYPE
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
1.3.6.1.4.1.89.26.1.1.2INTEGERread-writemandatory
rsIpAdEntNetMask
OBJECT-TYPE
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
1.3.6.1.4.1.89.26.1.1.3IpAddressread-writemandatory
rsIpAdEntForwardIpBroadcast
OBJECT-TYPE
This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).
1.3.6.1.4.1.89.26.1.1.4INTEGER {enable(1), disable(2)}read-writemandatory
rsIpAdEntReasmMaxSize
OBJECT-TYPE
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
1.3.6.1.4.1.89.26.1.1.5INTEGER (0..65535)read-onlymandatory
rsIpAdEntStatus
OBJECT-TYPE
The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II).
1.3.6.1.4.1.89.26.1.1.6INTEGER {valid(1), invalid(2)}read-writemandatory
rsIpAdEntBcastAddr
OBJECT-TYPE
Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.
1.3.6.1.4.1.89.26.1.1.7INTEGER (0..1)read-writemandatory
rsIpAdEntVlanTag
OBJECT-TYPE
The vlan Tag value that represent this ip interface this filed include both vlna tag and vlan priority
1.3.6.1.4.1.89.26.1.1.8INTEGERread-writemandatory
rsIpAdEntOneIpMode
OBJECT-TYPE
the one-ip mode. Relevant only for LinkProof devices. disable - regular interface. Enable - the specific ip can be ip-to-me (to device) and/or forwarding ip
1.3.6.1.4.1.89.26.1.1.9INTEGER {enable(1), disable(2)}read-writemandatory
rsIpAdEntType
OBJECT-TYPE
Ip interface type. The way the ip-interface was set determine its type
1.3.6.1.4.1.89.26.1.1.10INTEGER {static(1), dhcp(2), pppoe(3), pptp(4)}read-onlymandatory
rsIpAdEntPeerAddr
OBJECT-TYPE
IP of same interface on the peer device.
1.3.6.1.4.1.89.26.1.1.11IpAddressread-writemandatory
rsIpAdEntPeerAddrStatus
OBJECT-TYPE
Indicating the relevancy of PeerAddr for this row
1.3.6.1.4.1.89.26.1.1.12INTEGER {relevant(1), nonrelevant(2)}read-writemandatory
icmpSpec
OBJECT-IDENTITY
1.3.6.1.4.1.89.26.2
rsIcmpGenErrMsgEnable
OBJECT-TYPE
This variable controlls the ability to generate ICMP error messages
1.3.6.1.4.1.89.26.2.1INTEGER {enable(1), disable(2)}read-writemandatory
rsIcmpRdTable
OBJECT-TYPE
This table contains ICMP Router Discovery parameters configurated per IP interface.
1.3.6.1.4.1.89.26.2.2not-accessiblemandatory
rsIcmpRdEntry
OBJECT-TYPE
The ICMP parameters configurated for IP interface.
1.3.6.1.4.1.89.26.2.2.1not-accessiblemandatory
rsIcmpRdIpAddr
OBJECT-TYPE
The IP address to which this entry's information pertains.
1.3.6.1.4.1.89.26.2.2.1.1IpAddressread-onlymandatory
rsIcmpRdIpAdvertAddr
OBJECT-TYPE
The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255.
1.3.6.1.4.1.89.26.2.2.1.2IpAddressread-writemandatory
rsIcmpRdMaxAdvertInterval
OBJECT-TYPE
The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.
1.3.6.1.4.1.89.26.2.2.1.3INTEGER (4..1800)read-writemandatory
rsIcmpRdMinAdvertInterval
OBJECT-TYPE
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpRdMaxAdvertInterval.
1.3.6.1.4.1.89.26.2.2.1.4INTEGER (3..1800)read-writemandatory
rsIcmpRdAdvertLifetime
OBJECT-TYPE
The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval.
1.3.6.1.4.1.89.26.2.2.1.5INTEGER (4..9000)read-writemandatory
rsIcmpRdAdvertise
OBJECT-TYPE
A flag indicating whether or not the address is to be advertised.
1.3.6.1.4.1.89.26.2.2.1.6INTEGER {enable(1), disable(2)}read-writemandatory
rsIcmpRdPreferenceLevel
OBJECT-TYPE
The preferability of the address as a default router address, relative to other router addresses on the same subnet.
1.3.6.1.4.1.89.26.2.2.1.7INTEGERread-writemandatory
rsIcmpRdEntStatus
OBJECT-TYPE
Setting of any value to this object set values of all fields to the default values.
1.3.6.1.4.1.89.26.2.2.1.8INTEGERread-writemandatory
rip2Spec
OBJECT-IDENTITY
1.3.6.1.4.1.89.26.3
rsRip2IfConfTable
OBJECT-TYPE
This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2)
1.3.6.1.4.1.89.26.3.1not-accessiblemandatory
rsRip2IfConfEntry
OBJECT-TYPE
1.3.6.1.4.1.89.26.3.1.1not-accessiblemandatory
rsRip2IfConfAddress
OBJECT-TYPE
The IP Address of this system on the indicated subnet.
1.3.6.1.4.1.89.26.3.1.1.1IpAddressread-onlymandatory
rsRip2IfConfVirtualDis
OBJECT-TYPE
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
1.3.6.1.4.1.89.26.3.1.1.2INTEGERread-writemandatory
rsRip2IfConfAutoSend
OBJECT-TYPE
This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration.
1.3.6.1.4.1.89.26.3.1.1.3INTEGER {enable(1), disable(2)}read-writemandatory
rdwrRip2IfConfTable
OBJECT-TYPE
A list of subnets which require separate configuration in RIP. This is a combination of rip2IfConfTable and rsRip2IfConfTable.
1.3.6.1.4.1.89.26.3.2not-accessiblemandatory
rdwrRip2IfConfEntry
OBJECT-TYPE
A Single Routing Domain in a single Subnet.
1.3.6.1.4.1.89.26.3.2.1not-accessiblemandatory
rdwrRip2IfConfAddress
OBJECT-TYPE
The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
1.3.6.1.4.1.89.26.3.2.1.1IpAddressread-onlymandatory
rdwrRip2IfConfDomain
OBJECT-TYPE
Value inserted into the Routing Domain field of all RIP packets sent on this interface.
1.3.6.1.4.1.89.26.3.2.1.2RouteTagread-writedeprecated
rdwrRip2IfConfAuthType
OBJECT-TYPE
The type of Authentication used on this interface.
1.3.6.1.4.1.89.26.3.2.1.3INTEGER {noAuthentication(1), simplePassword(2)}read-writemandatory
rdwrRip2IfConfAuthKey
OBJECT-TYPE
The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has the value simplePassword word. A modification of the corresponding instance of rip2IfConfAuthType does not modify the rip2IfConfAuthKey value. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
1.3.6.1.4.1.89.26.3.2.1.4OCTET STRING (SIZE(0..16))read-writemandatory
rdwrRip2IfConfSend
OBJECT-TYPE
What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates. ripV1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules. ripV2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules.
1.3.6.1.4.1.89.26.3.2.1.5INTEGER {doNotSend(1), ripVersion1(2), rip1Compatible(3), ripVersion2(4), ripV1Demand(5), ripV2Demand(6)}read-writemandatory
rdwrRip2IfConfReceive
OBJECT-TYPE
This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
1.3.6.1.4.1.89.26.3.2.1.6INTEGER {rip1(1), rip2(2), rip1OrRip2(3), doNotRecieve(4)}read-writemandatory
rdwrRip2IfConfDefaultMetric
OBJECT-TYPE
This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another router may be propagated.
1.3.6.1.4.1.89.26.3.2.1.7INTEGER (0..15)read-writemandatory
rdwrRip2IfConfStatus
OBJECT-TYPE
Writing invalid has the effect of deleting this interface.
1.3.6.1.4.1.89.26.3.2.1.8INTEGER {valid(1), invalid(2)}read-writemandatory
rdwrRip2IfConfSrcAddress
OBJECT-TYPE
The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On unnumbered interfaces, it must be the value of rip2IfConfAddress for some interface on the system.
1.3.6.1.4.1.89.26.3.2.1.9IpAddressread-writemandatory
rdwrRip2IfConfVirtualDis
OBJECT-TYPE
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
1.3.6.1.4.1.89.26.3.2.1.10INTEGERread-writemandatory
rdwrRip2IfConfAutoSend
OBJECT-TYPE
This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration.
1.3.6.1.4.1.89.26.3.2.1.11INTEGER {enable(1), disable(2)}read-writemandatory
arpSpec
OBJECT-IDENTITY
1.3.6.1.4.1.89.26.4
rsArpDeleteTable
OBJECT-TYPE
Setting this object to any not-null value has the effect of deleting all entries of the ARP table.
1.3.6.1.4.1.89.26.4.1INTEGERread-writemandatory
rsArpInactiveTimeOut
OBJECT-TYPE
This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
1.3.6.1.4.1.89.26.4.2INTEGERread-writemandatory
rsArpProxy
OBJECT-TYPE
When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
1.3.6.1.4.1.89.26.4.3INTEGER {enable(1), disable(2)}read-writemandatory
tftp
OBJECT-IDENTITY
1.3.6.1.4.1.89.26.5
rsTftpRetryTimeOut
OBJECT-TYPE
General Retransmission time-out value (seconds)
1.3.6.1.4.1.89.26.5.1INTEGERread-writemandatory
rsTftpTotalTimeOut
OBJECT-TYPE
Total Retransmission time-out value (seconds)
1.3.6.1.4.1.89.26.5.2INTEGERread-writemandatory
rsSendConfigFile
OBJECT-TYPE
The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address.
1.3.6.1.4.1.89.26.5.3DisplayStringread-writemandatory
rsGetConfigFile
OBJECT-TYPE
The file name include path where the Router Server will get the configuration. The default source address will be the sender address.
1.3.6.1.4.1.89.26.5.4DisplayStringread-writemandatory
rsLoadSoftware
OBJECT-TYPE
The file name include path where the Router Server will get the software. The source address will the sender address.
1.3.6.1.4.1.89.26.5.5DisplayStringread-writemandatory
rsFileServerAddress
OBJECT-TYPE
The IP address of the configuration / sw server.
1.3.6.1.4.1.89.26.5.6IpAddressread-writemandatory
rsGetConfigFileAppend
OBJECT-TYPE
The file name include path where the Router Server will get the configuration commands file. The default source address will be the sender address.
1.3.6.1.4.1.89.26.5.8DisplayStringread-writemandatory
rsGetConfigFileAppendReboot
OBJECT-TYPE
The file name include path where the Router Server will get the configuration commands file. The default source address will be the sender address.
1.3.6.1.4.1.89.26.5.9DisplayStringread-writemandatory
rsGetConfigErrorLog
OBJECT-TYPE
The file name include path where the Router Server will get the configuration. The default source address will be the sender address.
1.3.6.1.4.1.89.26.5.10DisplayStringread-writemandatory
rsSendConfigFileBer
OBJECT-TYPE
The file name include path where the device puts the full configuration in BER format. The default destination address will be the sender address.
1.3.6.1.4.1.89.26.5.11DisplayStringread-writemandatory
rsIncludePrivateKeys
OBJECT-TYPE
Flags whether the configuration will include private keys.
1.3.6.1.4.1.89.26.5.12FeatureStatusread-writemandatory
rsGetConfigFileType
OBJECT-TYPE
Type of configuration to be downloaded.
1.3.6.1.4.1.89.26.5.13INTEGER {regular(0), active-active(1), active-backup(2), for-peer(3)}read-writemandatory
ipRedundancy
OBJECT-IDENTITY
1.3.6.1.4.1.89.26.6
ipRedundAdminStatus
OBJECT-TYPE
This variable controls the IP Redundancy method in the device. In case the value is enable, it means the ARP redundancy mechanism is running .If the value is vrrp, it means the former redundancy mechanism is disabled, and the vrrp mechanism is enabled. If the value is disable, both redundancy methods are disabled
1.3.6.1.4.1.89.26.6.1INTEGER {enable(1), disable(2), vrrp(3)}read-writemandatory
ipRedundOperStatus
OBJECT-TYPE
obsolete
1.3.6.1.4.1.89.26.6.2INTEGER {active(1), inactive(2)}read-onlymandatory
ipRedundRoutersTable
OBJECT-TYPE
List of IP addresses backed up by this router.
1.3.6.1.4.1.89.26.6.3not-accessiblemandatory
ipRedundRoutersEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.26.6.3.1not-accessiblemandatory
ipRedundRoutersIfAddr
OBJECT-TYPE
The Ip address of the IP interface on which the redundancy feature is operational.
1.3.6.1.4.1.89.26.6.3.1.1IpAddressread-onlymandatory
ipRedundRoutersMainRouterAddr
OBJECT-TYPE
The Ip address of the polled main router.
1.3.6.1.4.1.89.26.6.3.1.2IpAddressread-onlymandatory
ipRedundRoutersOperStatus
OBJECT-TYPE
If active, the main router is considered inoperational and the IP interface operates as its backup.
1.3.6.1.4.1.89.26.6.3.1.3INTEGER {active(1), inactive(2)}read-onlymandatory
ipRedundRoutersPollInterval
OBJECT-TYPE
Polling interval for this router (in seconds). If 0 the router is not polled.
1.3.6.1.4.1.89.26.6.3.1.4INTEGERread-writemandatory
ipRedundRoutersTimeout
OBJECT-TYPE
Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup.
1.3.6.1.4.1.89.26.6.3.1.5INTEGERread-writemandatory
ipRedundRoutersStatus
OBJECT-TYPE
Entry status
1.3.6.1.4.1.89.26.6.3.1.6INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)}read-writemandatory
rdwrRedunForceDownPorts
OBJECT-TYPE
the time that the forced ports will be electrically down. The value 0 means that the feature is disabled
1.3.6.1.4.1.89.26.6.4INTEGER (0..60)read-writemandatory
rdwrRedundancyInfoTable
OBJECT-TYPE
Row holding the device redundancy information.
1.3.6.1.4.1.89.26.6.5not-accessiblemandatory
rdwrRedundancyInfoEntry
OBJECT-TYPE
Row definition for the table.
1.3.6.1.4.1.89.26.6.5.1not-accessiblemandatory
rdwrRedundancyInfoIdx
OBJECT-TYPE
The entry index. Starting from 1
1.3.6.1.4.1.89.26.6.5.1.1INTEGERread-onlymandatory
rdwrRedundancyInfoInterface
OBJECT-TYPE
The entry attached interface
1.3.6.1.4.1.89.26.6.5.1.2INTEGERread-onlymandatory
rdwrRedundancyInfoVRID
OBJECT-TYPE
Supporting VRRP, the entry indicates the entry VRID
1.3.6.1.4.1.89.26.6.5.1.3INTEGERread-onlymandatory
rdwrRedundancyInfoMode
OBJECT-TYPE
This variable indicates the IP Redundancy method in the device
1.3.6.1.4.1.89.26.6.5.1.4INTEGER {arp(1), not-used(2), vrrp(3)}read-onlymandatory
rdwrRedundancyInfoMyAddress
OBJECT-TYPE
The entry indicates the device interfece address
1.3.6.1.4.1.89.26.6.5.1.5IpAddressread-onlymandatory
rdwrRedundancyInfoNeighborAddress
OBJECT-TYPE
Acting as backup, the entry indicates the master associated address
1.3.6.1.4.1.89.26.6.5.1.6IpAddressread-onlymandatory
rdwrRedundancyInfoStatus
OBJECT-TYPE
The redundancy entry status
1.3.6.1.4.1.89.26.6.5.1.7INTEGER {active(1), backup(2)}read-onlymandatory
ipRouteLeaking
OBJECT-IDENTITY
1.3.6.1.4.1.89.26.7
ipLeakStaticToRip
OBJECT-TYPE
This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
1.3.6.1.4.1.89.26.7.1INTEGER {enable(1), disable(2)}read-writemandatory
ipLeakStaticToOspf
OBJECT-TYPE
This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes.
1.3.6.1.4.1.89.26.7.2INTEGER {enable(1), disable(2)}read-writemandatory
ipLeakOspfToRip
OBJECT-TYPE
This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP.
1.3.6.1.4.1.89.26.7.3INTEGER {enable(1), disable(2)}read-writemandatory
ipLeakRipToOspf
OBJECT-TYPE
This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes.
1.3.6.1.4.1.89.26.7.4INTEGER {enable(1), disable(2)}read-writemandatory
ipLeakExtDirectToOspf
OBJECT-TYPE
This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes.
1.3.6.1.4.1.89.26.7.5INTEGER {enable(1), disable(2)}read-writemandatory
ipLeakOverrideOSPFLeakonFailure
OBJECT-TYPE
In case of OSPF: don't advertise the device as next hop router in case all load balanced devices are down.
1.3.6.1.4.1.89.26.7.6INTEGER {enable(1), disable(2)}read-writemandatory
ipLeakAdvertiseOSPFAccordingtoPortRules
OBJECT-TYPE
in OPSF: advertise routing according to the port rules
1.3.6.1.4.1.89.26.7.7INTEGER {enable(1), disable(2)}read-writemandatory
ipRipFilter
OBJECT-IDENTITY
1.3.6.1.4.1.89.26.8
rsIpRipFilterGlbTable
OBJECT-TYPE
The table of RIP global filters per IP router.
1.3.6.1.4.1.89.26.8.1not-accessiblemandatory
rsIpRipFilterGlbEntry
OBJECT-TYPE
An entry in the RIP global filter table
1.3.6.1.4.1.89.26.8.1.1not-accessiblemandatory
rsIpRipFilterGlbType
OBJECT-TYPE
Type of filter - input/output
1.3.6.1.4.1.89.26.8.1.1.1INTEGER {input(1), output(2)}read-onlymandatory
rsIpRipFilterGlbNumber
OBJECT-TYPE
Number of RIP filter.
1.3.6.1.4.1.89.26.8.1.1.2INTEGERread-onlymandatory
rsIpRipFilterGlbStatus
OBJECT-TYPE
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
1.3.6.1.4.1.89.26.8.1.1.3INTEGER {valid(1), invalid(2), underCreation(3)}read-writemandatory
rsIpRipFilterGlbIpAddr
OBJECT-TYPE
network prefix IP address, as in the forwarding table.
1.3.6.1.4.1.89.26.8.1.1.4IpAddressread-writemandatory
rsIpRipFilterGlbNetworkMaskBits
OBJECT-TYPE
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
1.3.6.1.4.1.89.26.8.1.1.5INTEGERread-writemandatory
rsIpRipFilterGlbMatchBits
OBJECT-TYPE
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
1.3.6.1.4.1.89.26.8.1.1.6INTEGERread-writemandatory
rsIpRipFilterGlbAction
OBJECT-TYPE
Filter action - permit/deny for this network
1.3.6.1.4.1.89.26.8.1.1.7INTEGER {deny(1), permit(2)}read-writemandatory
rsIpRipFilterLclTable
OBJECT-TYPE
Table of input/output RIP filters used per IP Interface.
1.3.6.1.4.1.89.26.8.2not-accessiblemandatory
rsIpRipFilterLclEntry
OBJECT-TYPE
An entry in the Intf RIP filter table
1.3.6.1.4.1.89.26.8.2.1not-accessiblemandatory
rsIpRipFilterLclIpIntf
OBJECT-TYPE
The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr.
1.3.6.1.4.1.89.26.8.2.1.1IpAddressread-onlymandatory
rsIpRipFilterLclType
OBJECT-TYPE
Type of filter - input/output
1.3.6.1.4.1.89.26.8.2.1.2INTEGER {input(1), output(2)}read-onlymandatory
rsIpRipFilterLclNumber
OBJECT-TYPE
Number of RIP filter for this Interface
1.3.6.1.4.1.89.26.8.2.1.3INTEGERread-onlymandatory
rsIpRipFilterLclStatus
OBJECT-TYPE
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
1.3.6.1.4.1.89.26.8.2.1.4INTEGER {valid(1), invalid(2), underCreation(3)}read-writemandatory
rsIpRipFilterLclIpAddr
OBJECT-TYPE
network prefix IP address, as in the forwarding table.
1.3.6.1.4.1.89.26.8.2.1.5IpAddressread-writemandatory
rsIpRipFilterLclNetworkMaskBits
OBJECT-TYPE
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
1.3.6.1.4.1.89.26.8.2.1.6INTEGERread-writemandatory
rsIpRipFilterLclMatchBits
OBJECT-TYPE
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.
1.3.6.1.4.1.89.26.8.2.1.7INTEGERread-writemandatory
rsIpRipFilterLclAction
OBJECT-TYPE
Filter action - permit/deny
1.3.6.1.4.1.89.26.8.2.1.8INTEGER {deny(1), permit(2)}read-writemandatory
rsRipEnable
OBJECT-TYPE
Enables or disables RIP.
1.3.6.1.4.1.89.26.9INTEGER {enable(1), disable(2)}read-writemandatory
lreBoxAgentIP
OBJECT-TYPE
1.3.6.1.4.1.89.26.10IpAddressread-writemandatory
ipIfTable
OBJECT-TYPE
This table is parralel to IPv6 MIB (RFC4293) ipIfTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
1.3.6.1.4.1.89.26.11not-accessiblemandatory
ipIfEntry
OBJECT-TYPE
The addressing information for one of this entity's IP addresses.
1.3.6.1.4.1.89.26.11.1not-accessiblemandatory
ipIfAddr
OBJECT-TYPE
The IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.89.26.11.1.1Ipv6Addressread-onlymandatory
ipIfPrefix
OBJECT-TYPE
The IP address's prefix.
1.3.6.1.4.1.89.26.11.1.2INTEGER (0..128)read-writemandatory
ipIfIndex
OBJECT-TYPE
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
1.3.6.1.4.1.89.26.11.1.3INTEGERread-writemandatory
ipIfFwdBroadcast
OBJECT-TYPE
This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).
1.3.6.1.4.1.89.26.11.1.4INTEGER {enable(1), disable(2)}read-writemandatory
ipIfBcastAddr
OBJECT-TYPE
Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.
1.3.6.1.4.1.89.26.11.1.5INTEGER (0..1)read-writemandatory
ipIfVlanTag
OBJECT-TYPE
The vlan Tag value that represent this ip interface this filed include both vlna tag and vlan priority
1.3.6.1.4.1.89.26.11.1.6INTEGERread-writemandatory
ipIfLabel
OBJECT-TYPE
User textual dscription of the ip interface.
1.3.6.1.4.1.89.26.11.1.7DisplayString (SIZE(0..20))read-writemandatory
ipIfEntryStatus
OBJECT-TYPE
It is used to delete an entry
1.3.6.1.4.1.89.26.11.1.8RowStatusread-writemandatory
ipIfBackupAddr
OBJECT-TYPE
The ip address of the peer address. It is used by CDE and High Availability.
1.3.6.1.4.1.89.26.11.1.9Ipv6Addressread-writemandatory
ipSpecRouteTable
OBJECT-TYPE
This entity's IP Routing table.
1.3.6.1.4.1.89.26.12not-accessiblemandatory
ipSpecRouteEntry
OBJECT-TYPE
A particular route to a particular destination, under a particular policy (as reflected in the ipSpecRoutePolicy object). Dynamically created rows will survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in ipSpecRouteDest, and ipSpecRouteNextHop exceeds 111, then OIDs of column instances in this table will have more than 128 sub- identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
1.3.6.1.4.1.89.26.12.1not-accessiblemandatory
ipSpecRouteDest
OBJECT-TYPE
The destination IP address of this route. The values for the index objects ipSpecRouteDest and ipSpecRoutePfxLen must be consistent. When the value of ipSpecRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object ipSpecRoutePfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.
1.3.6.1.4.1.89.26.12.1.1Ipv6Addressread-writemandatory
ipSpecRoutePfxLen
OBJECT-TYPE
The prefix length. For IPv4 must be <=32, for IPv6 <= 128. The values for the index objects ipSpecRouteDest and ipSpecRoutePfxLen must be consistent. For IPv4 must be <=32, for IPv6 <= 128. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.
1.3.6.1.4.1.89.26.12.1.2INTEGER (0..128)read-writemandatory
ipSpecRouteNextHop
OBJECT-TYPE
On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of the ipSpecRouteNextHopType object.
1.3.6.1.4.1.89.26.12.1.3Ipv6Addressread-writemandatory
ipSpecRouteMetric
OBJECT-TYPE
The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipSpecRouteProto value. The default value is 1.
1.3.6.1.4.1.89.26.12.1.4INTEGER (1..9999)read-writemandatory
ipSpecRoutePort
OBJECT-TYPE
The Port value that identifies the local port/interface through which the next hop of this route should be reached.
1.3.6.1.4.1.89.26.12.1.5INTEGERread-onlymandatory
ipSpecRouteLabel
OBJECT-TYPE
User defined data.
1.3.6.1.4.1.89.26.12.1.6DisplayString (SIZE(0..20))read-onlymandatory
ipSpecRouteStatus
OBJECT-TYPE
The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1).
1.3.6.1.4.1.89.26.12.1.7RowStatusread-writemandatory
ip6NetToMediaTable
OBJECT-TYPE
This entity's ND table.
1.3.6.1.4.1.89.26.13not-accessiblemandatory
ip6NetToMediaEntry
OBJECT-TYPE
The addressing information for one of this entity's ND addresses.
1.3.6.1.4.1.89.26.13.1not-accessiblemandatory
ip6NetToMediaIfIndex
OBJECT-TYPE
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
1.3.6.1.4.1.89.26.13.1.1INTEGERread-writemandatory
ip6NetToMediaPhysAddress
OBJECT-TYPE
The media-dependent `physical' address.
1.3.6.1.4.1.89.26.13.1.2PhysAddressread-writemandatory
ip6NetToMediaNetAddress
OBJECT-TYPE
The IpAddress corresponding to the media- dependent `physical' address.
1.3.6.1.4.1.89.26.13.1.3Ipv6Addressread-writemandatory
ip6NetToMediaType
OBJECT-TYPE
The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
1.3.6.1.4.1.89.26.13.1.4INTEGER {other(1), invalid(2), dynamic(3), static(4)}read-writemandatory
ndSpec
OBJECT-IDENTITY
1.3.6.1.4.1.89.26.14
rsNetNdInactiveTimeOut
OBJECT-TYPE
This variable defines the maximum time period (in second) that can pass between Neighbor-discovery requests concerning an entry in the Neighbor-discovery table. After this time period, the entry is deleted from the table. This timer is common for both IPv6 Neighbor-discovery and IPv4 ARP.
1.3.6.1.4.1.89.26.14.1INTEGERread-writemandatory
virtualLan
OBJECT-IDENTITY
1.3.6.1.4.1.89.27
virtualLanTable
OBJECT-TYPE
An entry of this table specifies an new ifIndex with a type of propVirtual(53).
1.3.6.1.4.1.89.27.1not-accessiblemandatory
virtualLanEntry
OBJECT-TYPE
A list of information for each virtual LAN.
1.3.6.1.4.1.89.27.1.1not-accessiblemandatory
vlIfIndex
OBJECT-TYPE
An logical interface number, corresponded this VL
1.3.6.1.4.1.89.27.1.1.1INTEGERread-writemandatory
vlProto
OBJECT-TYPE
The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type.
1.3.6.1.4.1.89.27.1.1.2INTEGER {other(1), ip(2), ipmulticast(3), ipxRaw(4), ipxET(5), ipxLLC(6), ipxSNAP(7), decNET(8), decLAT(9), netBios(10), appleTalk(11), xns(12), sna(13), userDefined(14)}read-writemandatory
vlAutoConfigEnable
OBJECT-TYPE
It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
1.3.6.1.4.1.89.27.1.1.3TruthValueread-writemandatory
vlStatus
OBJECT-TYPE
It is used to delete an entry
1.3.6.1.4.1.89.27.1.1.4RowStatusread-writemandatory
vlType
OBJECT-TYPE
regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs.
1.3.6.1.4.1.89.27.1.1.5INTEGER {regular(1), specBroadcast(2), specArpReq(3), specBroadcastAndUnicast(4), specArpReqAndUnicast(5)}read-writemandatory
virtualLanPortsTable
OBJECT-TYPE
For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
1.3.6.1.4.1.89.27.2not-accessiblemandatory
virtualLanPortEntry
OBJECT-TYPE
A entry of this table specifies a VL and a port belonging to it
1.3.6.1.4.1.89.27.2.1not-accessiblemandatory
vLIfIndex
OBJECT-TYPE
An logical interface number, corresponding to this VL
1.3.6.1.4.1.89.27.2.1.1INTEGERread-writemandatory
vLPortIfIndex
OBJECT-TYPE
A physical port belonging to the VL specified by vlIfIndex.
1.3.6.1.4.1.89.27.2.1.2INTEGERread-writemandatory
vLPortType
OBJECT-TYPE
static means configured by user dynamic means autoconfigured by the RS
1.3.6.1.4.1.89.27.2.1.3INTEGER {static(1), dynamic(2)}read-onlymandatory
vLPortStatus
OBJECT-TYPE
It is used to delete an entry
1.3.6.1.4.1.89.27.2.1.4RowStatusread-writemandatory
virtualLanAutoConfTable
OBJECT-TYPE
This table specifies per a routing protocol a set of ports, from which RS will automatically learning VL in accordance with rules, defined by the protocol.
1.3.6.1.4.1.89.27.3not-accessiblemandatory
virtualLanAutoConfEntry
OBJECT-TYPE
One port, specified by vlAutoConfPortIfIndex, for which the RS will automatically learn its VL in accordance with rules, defined by the protocol specified in vlAutoConfProto.
1.3.6.1.4.1.89.27.3.1not-accessiblemandatory
vlAutoConfPortIfIndex
OBJECT-TYPE
Port on which the autoconfig option should be supported
1.3.6.1.4.1.89.27.3.1.1INTEGERread-writemandatory
vlAutoConfProto
OBJECT-TYPE
Protocol for which the autoconfig option is supported for the port specified by vlAutoConfPortIfIndex
1.3.6.1.4.1.89.27.3.1.2INTEGER {ip(2)}read-onlymandatory
vlAutoConfStatus
OBJECT-TYPE
It is used to delete an entry
1.3.6.1.4.1.89.27.3.1.3RowStatusread-writemandatory
virtualLanAutoConfAgingTimeout
OBJECT-TYPE
The units of this MIB object is seconds. Its value can be either 0 or in range 10..65535 .
1.3.6.1.4.1.89.27.4INTEGERread-writemandatory
virtualLanProtocolVlan
OBJECT-IDENTITY
1.3.6.1.4.1.89.27.5
virtualLanUserEtherType
OBJECT-TYPE
1.3.6.1.4.1.89.27.5.1OCTET STRING (SIZE(2))read-writemandatory
virtualLanUserMask
OBJECT-TYPE
1.3.6.1.4.1.89.27.5.2OCTET STRING (SIZE(2))read-writemandatory
rsConf
OBJECT-IDENTITY
1.3.6.1.4.1.89.28
rsIfConfTable
OBJECT-TYPE
This table enable the user to add interface to the RS. RS will automatically add the new interface to the interface Table
1.3.6.1.4.1.89.28.1not-accessiblemandatory
rsIfConfEntry
OBJECT-TYPE
Each entry defines a configured interface.
1.3.6.1.4.1.89.28.1.1not-accessiblemandatory
rsIfConfIndex
OBJECT-TYPE
This variable uniquely identifies the interface. It is used as a cross reference in other system tables
1.3.6.1.4.1.89.28.1.1.1INTEGERread-onlymandatory
rsIfConfType
OBJECT-TYPE
This variable identifies the type of the specific entry in the rsIfConfTable. This field is writable only at creation time (i.e., when value of status is underCreation).
1.3.6.1.4.1.89.28.1.1.2RsIfTyperead-writemandatory
rsIfConfName
OBJECT-TYPE
This variable provides a logical name to a specific entry in rsIfConfTable
1.3.6.1.4.1.89.28.1.1.3DisplayStringread-writemandatory
rsIfConfStatus
OBJECT-TYPE
The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row is available for use by the managed device. createAndWait - A new instance of a conceptual row is desired, but not to have it available for use by the managed device. destroy - Delete all instances associated with an existing conceptual row.
1.3.6.1.4.1.89.28.1.1.4RowStatusread-writemandatory
rsTunning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29
rsHighPriority
OBJECT-TYPE
This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.
1.3.6.1.4.1.89.29.1INTEGERread-writemandatory
rsLowPriority
OBJECT-TYPE
This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.
1.3.6.1.4.1.89.29.2INTEGERread-writemandatory
rsDbgLevel
OBJECT-TYPE
This variable indicates the debug level the Router Server works. the range of this variable is 1..100
1.3.6.1.4.1.89.29.3INTEGERread-writemandatory
rsDiagnostic
OBJECT-TYPE
This variable will contain some dignostic information in case on a problem ocurs in the RS functinality.
1.3.6.1.4.1.89.29.4DisplayStringread-onlymandatory
rsConfirmMessagTab
OBJECT-TYPE
This variable enables the operator to confirm all the message in the event Message Table.
1.3.6.1.4.1.89.29.5INTEGERread-writemandatory
eventMessageTable
OBJECT-TYPE
The Event Message table of the agent
1.3.6.1.4.1.89.29.6not-accessiblemandatory
eventMessageEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.29.6.1not-accessiblemandatory
eventNum
OBJECT-TYPE
The event number,the index of this table.
1.3.6.1.4.1.89.29.6.1.1INTEGERread-onlymandatory
eventDesc
OBJECT-TYPE
The event discription, this text will include time and severity.
1.3.6.1.4.1.89.29.6.1.2DisplayStringread-onlymandatory
reaTunning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.7
reaIpRemoteAgingTime
OBJECT-TYPE
This variable specifies aging time used by the REA for remote entries in the Ip Fast Forwarding Table.
1.3.6.1.4.1.89.29.7.1INTEGERread-writemandatory
reaFftHashMaxChain
OBJECT-TYPE
This variable specifies the maximum length of hash chains in the Fast Forwarding Tables.
1.3.6.1.4.1.89.29.7.2INTEGERread-writemandatory
reaMltcstBitOn
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.3INTEGER {on(1), off(2)}read-writemandatory
reaIpForwardEnable
OBJECT-TYPE
The Platform will perform fast IP forwarding if only if this variable's value is enable.
1.3.6.1.4.1.89.29.7.4INTEGER {enable(1), disable(2)}read-writemandatory
reaIpxForwardEnable
OBJECT-TYPE
The Platform will perform fast IPX forwarding if only if this variable's value is enable.
1.3.6.1.4.1.89.29.7.5INTEGER {enable(1), disable(2)}read-writemandatory
reaBridgeEnable
OBJECT-TYPE
The Platform will perform bridging if only if this variable's value is enable.
1.3.6.1.4.1.89.29.7.6INTEGER {enable(1), disable(2)}read-writemandatory
reaFacsEnable
OBJECT-TYPE
The RS and Platform will perform FASC if only if this variable's value is enable.
1.3.6.1.4.1.89.29.7.7INTEGER {enable(1), disable(2)}read-writemandatory
reaIpForwardDatagrams
OBJECT-TYPE
The number of IP datagrams have been forwarded by the Platform.
1.3.6.1.4.1.89.29.7.8Counterread-onlymandatory
reaIpInDiscards
OBJECT-TYPE
The number of IP datagrams have been dicarded by the Platform.
1.3.6.1.4.1.89.29.7.9Counterread-onlymandatory
reaIpxForwardDatagrams
OBJECT-TYPE
The number of IPX datagrams have been forwarded by the Platform.
1.3.6.1.4.1.89.29.7.10Counterread-onlymandatory
reaIpxInDiscards
OBJECT-TYPE
The number of IP datagrams have been dicarded by the Platform.
1.3.6.1.4.1.89.29.7.11Counterread-onlymandatory
reaBridgeFftTable
OBJECT-TYPE
The Bridge Fast Forwarding Table
1.3.6.1.4.1.89.29.7.12not-accessiblemandatory
reaBridgeFftEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.29.7.12.1not-accessiblemandatory
reaBrgFftEntryNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.12.1.1INTEGERread-onlymandatory
reaBrgFftMacAddr
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.12.1.2PhysAddressread-onlymandatory
reaBrgFftReNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.12.1.3INTEGERread-onlymandatory
reaBrgFftPortNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.12.1.4INTEGERread-onlymandatory
reaBrgFftFacsSrcIndex
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.12.1.5INTEGERread-onlymandatory
reaBrgFftFacsDstIndex
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.12.1.6INTEGERread-onlymandatory
reaBrgDiscards
OBJECT-TYPE
The number of bridging datagrams have been discarded by the Platform.
1.3.6.1.4.1.89.29.7.13Counterread-onlymandatory
reaBrgForwards
OBJECT-TYPE
The number of bridging datagrams have been forwarded by the Platform.
1.3.6.1.4.1.89.29.7.14Counterread-onlymandatory
reaIpFftTable
OBJECT-TYPE
The IP Fast Forwarding Table
1.3.6.1.4.1.89.29.7.15not-accessiblemandatory
reaIpFftEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.29.7.15.1not-accessiblemandatory
reaIpFftEntryNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.1INTEGERread-onlymandatory
reaIpFftDstIpAddr
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.2IpAddressread-onlymandatory
reaIpFftDstIpMask
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.3IpAddressread-onlymandatory
reaIpFftRangeType
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.4INTEGER {direct(1), remote(2)}read-onlymandatory
reaIpFftSrcMacAddr
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.5PhysAddressread-onlymandatory
reaIpFftDstMacAddr
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.6PhysAddressread-onlymandatory
reaIpFftReNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.7INTEGERread-onlymandatory
reaIpFftPortNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.8INTEGERread-onlymandatory
reaIpFftFacsSrcIndex
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.9INTEGERread-onlymandatory
reaIpFftFacsDstIndex
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.15.1.10INTEGERread-onlymandatory
reaIpFftApplFlags
OBJECT-TYPE
A bit mask that defines the applications associated with this entry: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: Server Dispatcher Client
1.3.6.1.4.1.89.29.7.15.1.11OCTET STRING (SIZE(4))read-onlymandatory
reaIpxFftTable
OBJECT-TYPE
The IPX Fast Forwarding Table
1.3.6.1.4.1.89.29.7.16not-accessiblemandatory
reaIpxFftEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.29.7.16.1not-accessiblemandatory
reaIpxFftEntryNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.1INTEGERread-onlymandatory
reaIpxFftDstNetid
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.2INTEGERread-onlymandatory
reaIpxFftRangeType
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.3INTEGER {direct(1), remote(2)}read-onlymandatory
reaIpxFftSrcMacAddr
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.4PhysAddressread-onlymandatory
reaIpxFftDstMacAddr
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.5PhysAddressread-onlymandatory
reaIpxFftReNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.6INTEGERread-onlymandatory
reaIpxFftPortNum
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.7INTEGERread-onlymandatory
reaIpxFftFacsSrcIndex
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.8INTEGERread-onlymandatory
reaIpxFftFacsDstIndex
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.16.1.9INTEGERread-onlymandatory
lreVnResposibilityTable
OBJECT-TYPE
The Bridge Responsibility Table
1.3.6.1.4.1.89.29.7.17not-accessiblemandatory
lreVnResposibilityEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.29.7.17.1not-accessiblemandatory
lreVnRespVn
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.17.1.1INTEGERread-writemandatory
lreVnRespStatus
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.17.1.2RowStatusread-writemandatory
reaSrcViolationEnable
OBJECT-TYPE
The Platform will perform the Source Port Violation Procedure if only if this variable's value is enable.
1.3.6.1.4.1.89.29.7.18INTEGER {enable(1), disable(2)}read-writemandatory
reaSrcViolationTrapEnable
OBJECT-TYPE
The RS will send the Source Port Violation TRAP messages if only if this variable's value is enable.
1.3.6.1.4.1.89.29.7.19INTEGER {enable(1), disable(2)}read-writemandatory
reaSrcAddrValidationEnable
OBJECT-TYPE
The Platform will verify the source address of incoming IP datagram.
1.3.6.1.4.1.89.29.7.20INTEGER {enable(1), disable(2)}read-writemandatory
reaRsQueueDiscards
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.21Counterread-onlymandatory
reaBufFree
OBJECT-TYPE
The number of free buffers.
1.3.6.1.4.1.89.29.7.22INTEGERread-onlymandatory
lreResetDstMacBit46
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.23INTEGER {enable(1), disable(2)}read-writemandatory
lreQueSourceSelect
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.24INTEGER {vNET(1), dstMac(2)}read-writemandatory
lreResetDstMacBit47
OBJECT-TYPE
1.3.6.1.4.1.89.29.7.25INTEGER {enable(1), disable(2)}read-writemandatory
rsMaxEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8
rsMaxBridgeForwardingEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.1
rsMaxBrgFrwEntries
OBJECT-TYPE
Maximal number of entries in bridge forwarding table.
1.3.6.1.4.1.89.29.8.1.1INTEGERread-onlymandatory
rsMaxBrgFrwEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in bridge forwarding table.
1.3.6.1.4.1.89.29.8.1.2INTEGERread-writemandatory
rsMaxIpForwardingEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.2
rsMaxIpFrwEntries
OBJECT-TYPE
Maximal number of entries in Ip forwarding table.
1.3.6.1.4.1.89.29.8.2.1INTEGERread-onlymandatory
rsMaxIpFrwEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in Ip forwarding table.
1.3.6.1.4.1.89.29.8.2.2INTEGERread-writemandatory
rsMaxArpEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.3
rsMaxArpEntries
OBJECT-TYPE
Maximal number of entries in Arp forwarding table.
1.3.6.1.4.1.89.29.8.3.1INTEGERread-onlymandatory
rsMaxArpEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in Arp forwarding table.
1.3.6.1.4.1.89.29.8.3.2INTEGERread-writemandatory
rsMaxIpxForwardingEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.4
rsMaxIpxFrwEntries
OBJECT-TYPE
Maximal number of entries in Ipx forwarding table.
1.3.6.1.4.1.89.29.8.4.1INTEGERread-onlymandatory
rsMaxIpxFrwEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in Ipx forwarding table.
1.3.6.1.4.1.89.29.8.4.2INTEGERread-writemandatory
rsMaxIpxSapEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.5
rsMaxIpxSapEntries
OBJECT-TYPE
Maximal number of entries in IpxSap table.
1.3.6.1.4.1.89.29.8.5.1INTEGERread-onlymandatory
rsMaxIpxSapEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in IpxSap table.
1.3.6.1.4.1.89.29.8.5.2INTEGERread-writemandatory
rsMaxDspClntEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.6
rsMaxDspClntEntries
OBJECT-TYPE
Maximal number of entries in rsSdClientsTable.
1.3.6.1.4.1.89.29.8.6.1INTEGERread-onlymandatory
rsMaxDspClntEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in rsSdClientsTable.
1.3.6.1.4.1.89.29.8.6.2INTEGERread-writemandatory
rsMaxZeroHopRoutEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.7
rsMaxZhrConns
OBJECT-TYPE
The current maximal number of direct Zero-hop routing connections.
1.3.6.1.4.1.89.29.8.7.1INTEGERread-onlymandatory
rsMaxZhrConnsAfterReset
OBJECT-TYPE
The future (after reset) maximal number of direct Zero-hop routing connections.
1.3.6.1.4.1.89.29.8.7.2INTEGERread-writemandatory
rsMaxDspFrmEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.8
rsMaxDspFrmEntries
OBJECT-TYPE
Maximal number of entries in rsSdClientsTable.
1.3.6.1.4.1.89.29.8.8.1INTEGERread-onlymandatory
rsMaxDspFrmEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in rsSdClientsTable.
1.3.6.1.4.1.89.29.8.8.2INTEGERread-writemandatory
rsMaxRoutingEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.9
rsMaxRoutingEntries
OBJECT-TYPE
Maximal number of entries in the routing table.
1.3.6.1.4.1.89.29.8.9.1INTEGERread-onlymandatory
rsMaxRoutingEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the routing table.
1.3.6.1.4.1.89.29.8.9.2INTEGERread-writemandatory
rsMaxRadiusEntriesTuning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29.8.10
rsMaxRadiusUsersEntries
OBJECT-TYPE
Maximal number of entries in the radius users table.
1.3.6.1.4.1.89.29.8.10.1INTEGERread-onlymandatory
rsMaxRadiusUsersEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the radius users table.
1.3.6.1.4.1.89.29.8.10.2INTEGERread-writemandatory
rsMaxRadiusNasAuthEntries
OBJECT-TYPE
Maximal number of entries in the NAS Authenticators table.
1.3.6.1.4.1.89.29.8.10.3INTEGERread-onlymandatory
rsMaxRadiusNasAuthEntriesAfterReset
OBJECT-TYPE
Future maximal number of entries in the NAS Authenticators table.
1.3.6.1.4.1.89.29.8.10.4INTEGERread-writemandatory
rsTuneCheckMemory
OBJECT-TYPE
Shows whether the requested number of entries in the after-reset tuning variables can be successfully allocated.
1.3.6.1.4.1.89.29.9INTEGER {enoughMemory(1), notEnoughMemory(2)}read-onlymandatory
rsTuneLastCheckResult
OBJECT-TYPE
Number of Kbytes missing in request for new table sizes.
1.3.6.1.4.1.89.29.10INTEGERread-onlymandatory
stpSpec
OBJECT-IDENTITY
1.3.6.1.4.1.89.30
rsStpMode
OBJECT-TYPE
Default STP Mode.
1.3.6.1.4.1.89.30.1INTEGER {disabled(1), per-vlan(2)}read-writemandatory
rsStpDefaultBridgePriority
OBJECT-TYPE
Default STP priority for this bridge.
1.3.6.1.4.1.89.30.2INTEGER (0..61440)read-writemandatory
rsStpDefaultHelloTime
OBJECT-TYPE
Default STP hello time (Sec).
1.3.6.1.4.1.89.30.3INTEGER (1..10)read-writemandatory
rsStpDefaultMaxAgingTime
OBJECT-TYPE
Default STP hello time (Sec).
1.3.6.1.4.1.89.30.4INTEGER (6..40)read-writemandatory
rsStpDefaultForwardDelayTime
OBJECT-TYPE
Default STP hello time (Sec).
1.3.6.1.4.1.89.30.5INTEGER (4..30)read-writemandatory
rsStpDefaultPortPriority
OBJECT-TYPE
Default Port Priority.
1.3.6.1.4.1.89.30.6INTEGER (0..240)read-writemandatory
rsStpInstancesTable
OBJECT-TYPE
A table holding STP instances running on device
1.3.6.1.4.1.89.30.7not-accessiblemandatory
rsStpInstanceEntry
OBJECT-TYPE
An entry in the STP instances table
1.3.6.1.4.1.89.30.7.1not-accessiblemandatory
rsStpInstanceVlanId
OBJECT-TYPE
Vlan of STP instance.
1.3.6.1.4.1.89.30.7.1.1INTEGERread-onlymandatory
rsStpInstanceBridgePriority
OBJECT-TYPE
Current bridge priority.
1.3.6.1.4.1.89.30.7.1.2INTEGER (0..61440)read-writemandatory
rsStpInstanceHelloTime
OBJECT-TYPE
Hello Time (in seconds).
1.3.6.1.4.1.89.30.7.1.3INTEGER (1..10)read-writemandatory
rsStpInstanceMaxAgingTime
OBJECT-TYPE
Max Aging Time (in seconds).
1.3.6.1.4.1.89.30.7.1.4INTEGER (6..40)read-writemandatory
rsStpInstanceForwardDelayTime
OBJECT-TYPE
Forward Delay Time (in seconds).
1.3.6.1.4.1.89.30.7.1.5INTEGER (4..30)read-writemandatory
rsStpInstanceEnabled
OBJECT-TYPE
Whether this STP instance is enabled
1.3.6.1.4.1.89.30.7.1.6FeatureStatusread-writemandatory
rsStpInstanceRootId
OBJECT-TYPE
Spanning Tree Root Id.
1.3.6.1.4.1.89.30.7.1.7DisplayStringread-onlymandatory
rsStpInstanceRootPathCost
OBJECT-TYPE
Spanning Tree Root Path Cost.
1.3.6.1.4.1.89.30.7.1.8INTEGERread-onlymandatory
rsStpInstanceDesignatedBridgeId
OBJECT-TYPE
Designated Bridge Id.
1.3.6.1.4.1.89.30.7.1.9DisplayStringread-onlymandatory
rsStpInstanceDesignatedPortId
OBJECT-TYPE
Designated Port Id.
1.3.6.1.4.1.89.30.7.1.10INTEGERread-onlymandatory
rsStpPortTable
OBJECT-TYPE
A table holding STP Information and instance mapping for each port
1.3.6.1.4.1.89.30.8not-accessiblemandatory
rsStpPortEntry
OBJECT-TYPE
An entry in the STP ports table
1.3.6.1.4.1.89.30.8.1not-accessiblemandatory
rsStpPortId
OBJECT-TYPE
Port Id.
1.3.6.1.4.1.89.30.8.1.1INTEGERread-onlymandatory
rsStpPortVlanId
OBJECT-TYPE
Vlan this port belongs to.
1.3.6.1.4.1.89.30.8.1.2INTEGERread-onlymandatory
rsStpPortPriority
OBJECT-TYPE
STP Priority for this port.
1.3.6.1.4.1.89.30.8.1.3INTEGER (0..240)read-writemandatory
rsStpPortPathCost
OBJECT-TYPE
Port Path Cost.
1.3.6.1.4.1.89.30.8.1.4INTEGER (1..65535)read-writemandatory
rsStpPortModeFast
OBJECT-TYPE
Whether this port is an Edge port, and should start forwarding immediately.
1.3.6.1.4.1.89.30.8.1.5FeatureStatusread-writemandatory
rsStpPortEnabled
OBJECT-TYPE
Whether this port participates in spanning tree
1.3.6.1.4.1.89.30.8.1.6FeatureStatusread-writemandatory
rsStpPortState
OBJECT-TYPE
Port State according to STP Algorithm.
1.3.6.1.4.1.89.30.8.1.7INTEGER {discarding(1), learning(2), forwarding(3)}read-onlymandatory
rsStpPortRole
OBJECT-TYPE
Port Role according to STP Algorithm.
1.3.6.1.4.1.89.30.8.1.8INTEGER {disabled(1), root(2), designated(3), alternate(4), backup(5)}read-onlymandatory
rndApplications
OBJECT-IDENTITY
1.3.6.1.4.1.89.35
rsServerDispatcher
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1
rsWSDServerStatTable
OBJECT-TYPE
In this table the WSD collects statistics per servers.
1.3.6.1.4.1.89.35.1.12not-accessiblemandatory
rsWSDServerStatEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.12.1not-accessiblemandatory
rsWSDSerStatName
OBJECT-TYPE
This variable indicate the name assigned by the user to the serve.
1.3.6.1.4.1.89.35.1.12.1.1DisplayString (SIZE(1..30))read-onlymandatory
rsWSDSerStatAttUsersNum
OBJECT-TYPE
The total number of currently active users attached to this server.
1.3.6.1.4.1.89.35.1.12.1.2INTEGERread-onlymandatory
rsWSDSerStatPeakLoad
OBJECT-TYPE
Maximal number of frames per second dispatched to server since last reset.
1.3.6.1.4.1.89.35.1.12.1.3INTEGERread-onlymandatory
rsWSDSerStatFramesRate
OBJECT-TYPE
Number of frames per second dispatched to server.
1.3.6.1.4.1.89.35.1.12.1.4INTEGERread-onlymandatory
rsWSDSerStatFramesLoad
OBJECT-TYPE
Number of frames per second dispatched to server.
1.3.6.1.4.1.89.35.1.12.1.5Counterread-onlymandatory
rsWSDSerStatRecoveryTime
OBJECT-TYPE
Number of seconds after server initialization during which ISD won't send any requests.
1.3.6.1.4.1.89.35.1.12.1.6INTEGERread-writemandatory
rsWSDSerStatWarmUpTime
OBJECT-TYPE
Number of seconds after server recovery during which the server will get less requests than permitted by his weight and load.
1.3.6.1.4.1.89.35.1.12.1.7INTEGERread-writemandatory
rsWSDSerStatConnectionLimit
OBJECT-TYPE
The maximal number of client sessions which can be opened on this sever.
1.3.6.1.4.1.89.35.1.12.1.8INTEGERread-writemandatory
rsWSDSerStatAdminStatus
OBJECT-TYPE
Administrative status of physical server. enable - activates the server. The rsADServerOperStatus will change to active. connectionsShutdown - gracefully shuts down connections to the server by allowing existing connections to complete, while new connections are not forwarded to this server. The rsADServerOperStatus will change to noNewSessions. sessionsShutdown - gracefully shuts down sessions to the server by allowing existing sessions to complete (new connections that match existing sessions on this server are still forwarded to the server), while new sessions are not forwarded to this server. The rsADServerOperStatus will change to noNewSessions.
1.3.6.1.4.1.89.35.1.12.1.9INTEGER {enable(1), connectionsShutdown(2), sessionsShutdown(3)}read-writemandatory
rsWSDSerStatConnectionLimitReached
OBJECT-TYPE
Connection limit reached flag.
1.3.6.1.4.1.89.35.1.12.1.10INTEGERread-onlymandatory
wsdRedundTable
OBJECT-TYPE
List of Farm IP addresses backed up by this router.
1.3.6.1.4.1.89.35.1.16not-accessiblemandatory
wsdRedundEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.16.1not-accessiblemandatory
wsdRedundFarmAddr
OBJECT-TYPE
The Farm Virtual Ip address on which the redundancy feature operates.
1.3.6.1.4.1.89.35.1.16.1.1IpAddressread-onlymandatory
wsdRedundMainWsdAddr
OBJECT-TYPE
The Ip address of the polled main wsd.
1.3.6.1.4.1.89.35.1.16.1.2IpAddressread-onlymandatory
wsdRedundOperStatus
OBJECT-TYPE
If active, the main wsd is considered inactive and the IP interface operates as its backup.
1.3.6.1.4.1.89.35.1.16.1.3INTEGER {active(1), inactive(2)}read-onlymandatory
wsdRedundPollInterval
OBJECT-TYPE
Polling interval for the main wsd (in seconds). If 0 the wsd is not polled.
1.3.6.1.4.1.89.35.1.16.1.4INTEGERread-writemandatory
wsdRedundTimeout
OBJECT-TYPE
Interval in seconds during which the backed-up wsd must signal. If it does not signal, it is considered inactive and the IP interface starts operating as backup.
1.3.6.1.4.1.89.35.1.16.1.5INTEGERread-writemandatory
wsdRedundStatus
OBJECT-TYPE
Entry status
1.3.6.1.4.1.89.35.1.16.1.6INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)}read-writemandatory
rsWSDNewEntryOnSourcePort
OBJECT-TYPE
Check source port and if different open new client entry.
1.3.6.1.4.1.89.35.1.19INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSelectServerOnSourcePort
OBJECT-TYPE
Check source port and if different select a new server.
1.3.6.1.4.1.89.35.1.20INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDRedundancyMode
OBJECT-TYPE
Defines whether interface grouping functionality is enabled on the device.
1.3.6.1.4.1.89.35.1.21INTEGER {enable(1), disable(2)}read-writemandatory
rsNsdMode
OBJECT-TYPE
The Topology chosen for the NSD. Slow mode keeps the servers behind the NSD. Fast mode uses retargeting to connect clients directly to servers.
1.3.6.1.4.1.89.35.1.22INTEGER {slowMode(1), fastMode(2)}read-writemandatory
rsNsdWINSAddr
OBJECT-TYPE
NetBIOS Name Server IP Address.
1.3.6.1.4.1.89.35.1.23IpAddressread-writemandatory
rsWSDSyslogStatus
OBJECT-TYPE
Enable/Disable syslog message sending to remote station.
1.3.6.1.4.1.89.35.1.26INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSyslogAddress
OBJECT-TYPE
The IP Address of the syslog station.
1.3.6.1.4.1.89.35.1.27IpAddressread-writemandatory
rsWSDNTCheckTable
OBJECT-TYPE
In this table the WSD collects NT statistics per servers.
1.3.6.1.4.1.89.35.1.28not-accessiblemandatory
rsWSDNTCheckEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.28.1not-accessiblemandatory
rsWSDNTSerialNum
OBJECT-TYPE
The serial number of the algorithm.
1.3.6.1.4.1.89.35.1.28.1.1INTEGERread-onlymandatory
rsWSDNTFrequentCheckPeriod
OBJECT-TYPE
The period for getting the frequent NT variables.
1.3.6.1.4.1.89.35.1.28.1.2INTEGERread-writemandatory
rsWSDNTOpenSessionsWeight
OBJECT-TYPE
The weight for currently open sessions consideration.
1.3.6.1.4.1.89.35.1.28.1.3INTEGERread-writemandatory
rsWSDNTIncomingTrafficWeight
OBJECT-TYPE
The weight for incoming traffic consideration.
1.3.6.1.4.1.89.35.1.28.1.4INTEGERread-writemandatory
rsWSDNTOutgoingTrafficWeight
OBJECT-TYPE
The weight for outgoing traffic consideration.
1.3.6.1.4.1.89.35.1.28.1.5INTEGERread-writemandatory
rsWSDNTRegularCheckPeriod
OBJECT-TYPE
The period for getting the regular NT variables.
1.3.6.1.4.1.89.35.1.28.1.6INTEGERread-writemandatory
rsWSDNTAvResponseWeight
OBJECT-TYPE
The weight for average response time.
1.3.6.1.4.1.89.35.1.28.1.7INTEGERread-writemandatory
rsWSDNTUsersLimitWeight
OBJECT-TYPE
The weight for the users limit on the server.
1.3.6.1.4.1.89.35.1.28.1.8INTEGERread-writemandatory
rsWSDNTTCPLimitWeight
OBJECT-TYPE
The weight for the TCP connections limit on the server.
1.3.6.1.4.1.89.35.1.28.1.9INTEGERread-writemandatory
rsWSDNTRetries
OBJECT-TYPE
The number of retries before issuing a trap.
1.3.6.1.4.1.89.35.1.28.1.10INTEGERread-writemandatory
rsWSDNTCommunity
OBJECT-TYPE
The SNMP community name with which we access the servers.
1.3.6.1.4.1.89.35.1.28.1.11DisplayString (SIZE(1..30))read-writemandatory
rsWSDPrivateCheckTable
OBJECT-TYPE
In this table the WSD collects private statistics per server.
1.3.6.1.4.1.89.35.1.29not-accessiblemandatory
rsWSDPrivateCheckEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.29.1not-accessiblemandatory
rsWSDPrivateSerialNum
OBJECT-TYPE
The serial number of the algorithm.
1.3.6.1.4.1.89.35.1.29.1.1INTEGERread-onlymandatory
rsWSDPrivateSpecialCheckPeriod
OBJECT-TYPE
The period for getting the private variables.
1.3.6.1.4.1.89.35.1.29.1.2INTEGERread-writemandatory
rsWSDPrivateExtraVar1ID
OBJECT-TYPE
This MIB variable will be retrieved from the server.
1.3.6.1.4.1.89.35.1.29.1.3OBJECT IDENTIFIERread-writemandatory
rsWSDPrivateExtraVar1Weight
OBJECT-TYPE
The weight for variable number 1.
1.3.6.1.4.1.89.35.1.29.1.4INTEGERread-writemandatory
rsWSDPrivateExtraVar2ID
OBJECT-TYPE
This MIB variable will be retrieved from the server.
1.3.6.1.4.1.89.35.1.29.1.5OBJECT IDENTIFIERread-writemandatory
rsWSDPrivateExtraVar2Weight
OBJECT-TYPE
The weight for variable number 2.
1.3.6.1.4.1.89.35.1.29.1.6INTEGERread-writemandatory
rsWSDPrivateRetries
OBJECT-TYPE
The number of retries before issuing a trap.
1.3.6.1.4.1.89.35.1.29.1.7INTEGERread-writemandatory
rsWSDPrivateCommunity
OBJECT-TYPE
The SNMP community name with which we access the servers.
1.3.6.1.4.1.89.35.1.29.1.8DisplayString (SIZE(1..30))read-writemandatory
rsWSDPrivateExtraVar1Mode
OBJECT-TYPE
Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)
1.3.6.1.4.1.89.35.1.29.1.9INTEGER {ascending(1), descending(2)}read-writemandatory
rsWSDPrivateExtraVar2Mode
OBJECT-TYPE
Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)
1.3.6.1.4.1.89.35.1.29.1.10INTEGER {ascending(1), descending(2)}read-writemandatory
rsWSDDNSResolution
OBJECT-TYPE
Enable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm.
1.3.6.1.4.1.89.35.1.31INTEGER {enable(1), disable(2), proximity(3)}read-writemandatory
rsIGTransitTimeout
OBJECT-TYPE
Sets the Interface Grouping port status transit timeout in seconds, i.e. how much time after setting a port up, it is considered in a transit state. A port in a transit state is not considered as down, even if that port is not yet up (relevant to Interface Grouping).
1.3.6.1.4.1.89.35.1.32INTEGERread-writemandatory
rsWSDUserPassword
OBJECT-TYPE
Software download user provided password.
1.3.6.1.4.1.89.35.1.33DisplayString (SIZE(1..8))read-writemandatory
rsWSDUserVersion
OBJECT-TYPE
Software download user provided version.
1.3.6.1.4.1.89.35.1.34DisplayString (SIZE(1..6))read-writemandatory
rsWSDNatStatus
OBJECT-TYPE
Enable/Disable NAT - to hide the address of the server in messages send .
1.3.6.1.4.1.89.35.1.35INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDRedundancyTakeback
OBJECT-TYPE
Whether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal command
1.3.6.1.4.1.89.35.1.37INTEGER {automatic(1), manual(2)}read-writemandatory
rsMLB
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.38
rsCSD
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.39
rsNWSD
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.40
rsWSDIfTable
OBJECT-TYPE
RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
1.3.6.1.4.1.89.35.1.41not-accessiblemandatory
rsWSDIfEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.41.1not-accessiblemandatory
rsWSDIfIndex
OBJECT-TYPE
Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
1.3.6.1.4.1.89.35.1.41.1.1INTEGERread-onlymandatory
rsWSDIfBoardNum
OBJECT-TYPE
The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
1.3.6.1.4.1.89.35.1.41.1.2INTEGERread-onlymandatory
rsWSDIfNetAddress
OBJECT-TYPE
The IP address of the interface defined by the particular value of rsWSDIfIndex.
1.3.6.1.4.1.89.35.1.41.1.3IpAddressread-onlymandatory
rsWSDIfStatus
OBJECT-TYPE
The current status of the interface.
1.3.6.1.4.1.89.35.1.41.1.4INTEGER {ok(1), okSingleBrg(2), okMultiBrg(3), connctFault(4), rxFault(5), txFault(6), channelLoopback(7), rxClockFault(8), t1Alarm(9)}read-onlymandatory
rsWSDIfClockType
OBJECT-TYPE
rsWSDIfClockType defines the type of clock each interface uses: internal or external.
1.3.6.1.4.1.89.35.1.41.1.5INTEGER {external(1), internal(2), t1(3), g703(4)}read-writemandatory
rsWSDIfBaudRate
OBJECT-TYPE
Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
1.3.6.1.4.1.89.35.1.41.1.6INTEGERread-writemandatory
rsWSDIfCost
OBJECT-TYPE
This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
1.3.6.1.4.1.89.35.1.41.1.7INTEGERread-writemandatory
rsWSDIfCompression
OBJECT-TYPE
Defines whether data compression is enabled or disabled for the interface.
1.3.6.1.4.1.89.35.1.41.1.8INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDIfCompressionStatus
OBJECT-TYPE
Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.
1.3.6.1.4.1.89.35.1.41.1.9INTEGER {not-inserted(1), active(2), not-active(3), disable(4)}read-onlymandatory
rsWSDIfCompressionRate
OBJECT-TYPE
Percentage of compression. This variable applies only if rndCompressionStatus is active.
1.3.6.1.4.1.89.35.1.41.1.10INTEGERread-onlymandatory
rsWSDIfLATCompression
OBJECT-TYPE
Enable/Disable the LAT Compression.
1.3.6.1.4.1.89.35.1.41.1.11INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDIfCompressionType
OBJECT-TYPE
This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps.
1.3.6.1.4.1.89.35.1.41.1.12INTEGER {none(1), lowSpeed(2), highSpeed(3)}read-onlymandatory
rsWSDIfFilterMode
OBJECT-TYPE
This parameter indicates the type of filtering in the device.
1.3.6.1.4.1.89.35.1.41.1.13INTEGER {destinationOnly(1), sourceAndDestination(2), none(3)}read-writemandatory
rsWSDIfChannelType
OBJECT-TYPE
The type of the WAN channel
1.3.6.1.4.1.89.35.1.41.1.14INTEGER {wanChannel(1), ogRanPort(2), routerToBridge(3), spsFramRelay(4), dialBackup(5), snar(6), lan(7), spsX25(8), frameRelay1490(9), frameRelay1490CAR(10), frameRelayCAR(11), ppp(12)}read-writemandatory
rsWSDIfBridge
OBJECT-TYPE
This variable indicates whether this interface forward Layer II pakages.
1.3.6.1.4.1.89.35.1.41.1.15INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDHighPriorityIf
OBJECT-TYPE
This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager.
1.3.6.1.4.1.89.35.1.41.1.16INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDWanHeader
OBJECT-TYPE
This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family.
1.3.6.1.4.1.89.35.1.41.1.17INTEGER {regular(1), short(2)}read-writemandatory
rsWSDDuplexMode
OBJECT-TYPE
This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode.
1.3.6.1.4.1.89.35.1.41.1.18INTEGER {half(1), full(2), auto(3)}read-writemandatory
rsWSDClientMirrorPercentage
OBJECT-TYPE
The percent of client entries to back up.
1.3.6.1.4.1.89.35.1.42INTEGER (1..100)read-writemandatory
rsWSDMirrorStatus
OBJECT-TYPE
Enable/Disable mirroring. This enables the allocation of the mirror tables.
1.3.6.1.4.1.89.35.1.43INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDMirrorProtocolMode
OBJECT-TYPE
Enable/Disable of the mirror protocol. That is whether to send the mirror messages.
1.3.6.1.4.1.89.35.1.44INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDApplicationMirrorTable
OBJECT-TYPE
Table containing the list of active mirror entries.
1.3.6.1.4.1.89.35.1.45not-accessiblemandatory
rsWSDApplicationMirrorEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.45.1not-accessiblemandatory
rsWSDMirrorActiveAddress
OBJECT-TYPE
The IP address of the active device.
1.3.6.1.4.1.89.35.1.45.1.1IpAddressread-onlymandatory
rsWSDMirrorActiveStatus
OBJECT-TYPE
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
1.3.6.1.4.1.89.35.1.45.1.2INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)}read-writemandatory
rsWSDClientMirrorPollingTime
OBJECT-TYPE
The polling time for sending the client entries.
1.3.6.1.4.1.89.35.1.46INTEGERread-writemandatory
rsPlatformIdentifier
OBJECT-TYPE
An administratively-assigned value that identifies managed device platform.
1.3.6.1.4.1.89.35.1.47INTEGER {vgate(1), vgfe(2), onecpu(3), onecpuh(4), boomer(5), cougar(6), argo(7), kitty(8), voyager(9), galaxy(10), ninia(11), mecong(12), congo(13), ods1(14), ods2(15), ods3(16), ods3S1(17), ods3S2(18), vl(19), ods-ht(20)}read-onlymandatory
rsConfigurationIdentifier
OBJECT-TYPE
An administratively-assigned value that identifies managed device configuration. cg - copper gig, fg - fiber gig, fxg - fiber 10gig.
1.3.6.1.4.1.89.35.1.48INTEGER {twoPorts(1), fourPorts(2), fixed-2(3), fixed-8(4), fixed-8-2(5), fixed-16-5(6), chassis(7), fixed-7(8), fixed-16-7-1(9), fixed-9-1(10), fixed-8cg-9fg-2fxg(11), fixed-12cg-8fg(12), fixed-3cg(13), fixed-4-2(14), fixed-12-4-2(15), fixed-2-8-9(16), fixed-4-4-8-2(17), fixed-4-8-2(18), fixed-6(19), fixed-6-2(20), fixed-4-20-2(21)}read-onlymandatory
rsSWPasswordStatus
OBJECT-TYPE
Software download password status.
1.3.6.1.4.1.89.35.1.49INTEGER {statusUnset(1), passwordOK(2), wrongPassword(3)}read-writemandatory
rsWSDFlashSize
OBJECT-TYPE
Flash Size
1.3.6.1.4.1.89.35.1.50INTEGERread-onlymandatory
rsWSDDRAMSize
OBJECT-TYPE
DRAM Size
1.3.6.1.4.1.89.35.1.51INTEGERread-onlymandatory
rsWSDVLANRedundOperStatus
OBJECT-TYPE
Sets the backup redundant device for a VLAN. blockBroadcast - blocks only the broadcast traffic forwardTraffic - forwards the traffic blockAll - blocks broadcast and unicast traffic
1.3.6.1.4.1.89.35.1.52INTEGER {blockBroadcast(1), forwardTraffic(2), blockAll(3)}read-writemandatory
rsWSDResourceUtilization
OBJECT-TYPE
Resource Utilization of WSD. Considers network utilization and internal CPU utilization
1.3.6.1.4.1.89.35.1.53INTEGER (0..100)read-onlymandatory
rsWSDRSResourceUtilization
OBJECT-TYPE
Resource Utilization of internal CPU utilization
1.3.6.1.4.1.89.35.1.54INTEGER (0..100)read-onlymandatory
rsWSDREResourceUtilization
OBJECT-TYPE
Resource Utilization of network utilization
1.3.6.1.4.1.89.35.1.55INTEGER (0..100)read-onlymandatory
rsWSDBuildNumber
OBJECT-TYPE
Build number
1.3.6.1.4.1.89.35.1.56DisplayStringread-writemandatory
rsWSDUseOneTrap
OBJECT-TYPE
When enabled, a single trap is used to indicate server failure. When disabled, continuous traps are sent.
1.3.6.1.4.1.89.35.1.57INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSecuredComm
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.58
rsWSDSCProtcolsTable
OBJECT-TYPE
Table containing the list of ports/protocols for secured (encrypted) communication between the device and the management station or other device.
1.3.6.1.4.1.89.35.1.58.1not-accessiblemandatory
rsWSDSCProtcolsEntry
OBJECT-TYPE
The row definition for protocol table.
1.3.6.1.4.1.89.35.1.58.1.1not-accessiblemandatory
rsWSDSCProtocol
OBJECT-TYPE
The protocol that should work in secured mode.
1.3.6.1.4.1.89.35.1.58.1.1.1INTEGER {snmp(1), tftp(2), lrp(3), prp(4), srp(5), mirror(6)}read-onlymandatory
rsWSDSCProtocolStatus
OBJECT-TYPE
The status (secured or not secured) of the protocol.
1.3.6.1.4.1.89.35.1.58.1.1.2INTEGER {encrypted(1), notEncrypted(2)}read-writemandatory
rsWSDSNMPPortsTable
OBJECT-TYPE
The table contains all the physical ports. Each port can be set to allow/block SNMP operations to the device.
1.3.6.1.4.1.89.35.1.59not-accessiblemandatory
rsWSDSNMPPortsEntry
OBJECT-TYPE
Row definition for the table.
1.3.6.1.4.1.89.35.1.59.1not-accessiblemandatory
rsWSDSNMPPhysicalPortNumber
OBJECT-TYPE
Physical port number.
1.3.6.1.4.1.89.35.1.59.1.1INTEGERread-onlymandatory
rsWSDSNMPPhysicalPortState
OBJECT-TYPE
enable - accept SNMP operations on the physical port. disable - ignore SNMP opertaions on the physical port.
1.3.6.1.4.1.89.35.1.59.1.2INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSNMPPhysicalPortTelnetState
OBJECT-TYPE
enable - accept Telnet operations on the physical port. disable - ignore Telnet opertaions on the physical port.
1.3.6.1.4.1.89.35.1.59.1.3INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSNMPPhysicalPortSSHState
OBJECT-TYPE
enable - accept SSH operations on the physical port. disable - ignore SSH opertaions on the physical port.
1.3.6.1.4.1.89.35.1.59.1.4INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSNMPPhysicalPortWebState
OBJECT-TYPE
enable - accept Web operations on the physical port. disable - ignore Web opertaions on the physical port.
1.3.6.1.4.1.89.35.1.59.1.5INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSNMPPhysicalPortSSLState
OBJECT-TYPE
enable - accept SSL operations on the physical port. disable - ignore SSL opertaions on the physical port.
1.3.6.1.4.1.89.35.1.59.1.6INTEGER {enable(1), disable(2)}read-writemandatory
rsBWM
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.60
rsWSDTelnetUserTable
OBJECT-TYPE
A table containing the users authorized to use TELNET.
1.3.6.1.4.1.89.35.1.61not-accessiblemandatory
rsWSDTelnetUserEntry
OBJECT-TYPE
Information about a particular Telnet user.
1.3.6.1.4.1.89.35.1.61.1not-accessiblemandatory
rsWSDTelnetUserName
OBJECT-TYPE
User Name.
1.3.6.1.4.1.89.35.1.61.1.1DisplayString (SIZE(0..30))read-writemandatory
rsWSDTelnetUserPassword
OBJECT-TYPE
User password.
1.3.6.1.4.1.89.35.1.61.1.2DisplayString (SIZE(0..64))read-writemandatory
rsWSDTelnetUserEAddr
OBJECT-TYPE
User email address.
1.3.6.1.4.1.89.35.1.61.1.3DisplayString (SIZE(0..63))read-writemandatory
rsWSDTelnetUserSeverity
OBJECT-TYPE
minimum failure severity to be notified by mail
1.3.6.1.4.1.89.35.1.61.1.4INTEGER {none(1), info(2), warning(3), error(4), fatal(5)}read-writemandatory
rsWSDTelnetUserStatus
OBJECT-TYPE
Entry status
1.3.6.1.4.1.89.35.1.61.1.5RowStatusread-writemandatory
rsWSDTelnetUserGroup
OBJECT-TYPE
The group to which that user belongs.
1.3.6.1.4.1.89.35.1.61.1.6DisplayString (SIZE(0..30))read-writemandatory
rsWSDTelnetUserConfigurationTraceStatus
OBJECT-TYPE
enable mail trace of configuration change
1.3.6.1.4.1.89.35.1.61.1.7INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDTelnetUserConfigurationTraceInf
OBJECT-TYPE
specify configuration interfaces via which changes in configuration should be informed
1.3.6.1.4.1.89.35.1.61.1.8INTEGER {all(1), webBased(2), terminal(3), snmp(4), telnetSSH(5), ftp(6), ftpSSH(7)}read-writemandatory
rsWSDTelnetUserWebAccessLevel
OBJECT-TYPE
Defines access level for web based management. Either read-write, read-only or no access.
1.3.6.1.4.1.89.35.1.61.1.9INTEGER {readwrite(1), readonly(2), none(3)}read-writemandatory
rsWSDTelnetUserSshPublicKeyName
OBJECT-TYPE
The name of the Certificate Entry where the ssh public key resides.
1.3.6.1.4.1.89.35.1.61.1.10DisplayString (SIZE(0..63))read-writemandatory
rsWSDTelnetParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.62
rsWSDTelnetPort
OBJECT-TYPE
The Telnet Server Port.
1.3.6.1.4.1.89.35.1.62.1INTEGERread-writemandatory
rsWSDTelnetStatus
OBJECT-TYPE
Telnet Status. Enable/Disable Telnet Terminal operation.
1.3.6.1.4.1.89.35.1.62.2INTEGER {enable(1), disable(2)}read-writemandatory
rsSSD
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.63
rsSSDvirtualLan
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.63.1
rsSSDvirtualLanTable
OBJECT-TYPE
An entry of this table specifies an new ifIndex with a type of propVirtual(53).
1.3.6.1.4.1.89.35.1.63.1.1not-accessiblemandatory
rsSSDvirtualLanEntry
OBJECT-TYPE
A list of information for each virtual LAN.
1.3.6.1.4.1.89.35.1.63.1.1.1not-accessiblemandatory
rsSSDvlIfIndex
OBJECT-TYPE
An logical interface number, corresponded this VL
1.3.6.1.4.1.89.35.1.63.1.1.1.1INTEGERread-writemandatory
rsSSDvlProto
OBJECT-TYPE
The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type. swVlan: This is a Bridging and routing VL (switch VL) , Bridging is done on the Hertz/Uhaul level , and the RS route between nodes on different virtual LANs and/or between nodes of the switch VL.
1.3.6.1.4.1.89.35.1.63.1.1.1.2INTEGER {other(1), ip(2), ipmulticast(3), ipxRaw(4), ipxET(5), ipxLLC(6), ipxSNAP(7), decNET(8), decLAT(9), netBios(10), appleTalk(11), xns(12), sna(13), userDefined(14), swVlan(15)}read-writemandatory
rsSSDvlAutoConfigEnable
OBJECT-TYPE
It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
1.3.6.1.4.1.89.35.1.63.1.1.1.3TruthValueread-writemandatory
rsSSDvlStatus
OBJECT-TYPE
It is used to delete an entry
1.3.6.1.4.1.89.35.1.63.1.1.1.4RowStatusread-writemandatory
rsSSDvlType
OBJECT-TYPE
regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs. specSwitch - for switches that support VLANs as a set of ports. This VLAN type is for switching when packets do not have to get to the cpu except when an IP interface defined on the VLAN. In Switch VLAN the cpu don't interfere in the bridging action this is done on the Herzts level (L2).
1.3.6.1.4.1.89.35.1.63.1.1.1.5INTEGER {regular(1), specBroadcast(2), specArpReq(3), specBroadcastAndUnicast(4), specArpReqAndUnicast(5), specSwitch(6)}read-writemandatory
rsSSDvlTag
OBJECT-TYPE
A VLAN tag, used for this VLAN on tagged ports. If it's 0, then a value of (rsSSDvlIfIndex-100000+1) is used
1.3.6.1.4.1.89.35.1.63.1.1.1.6INTEGERread-writemandatory
rsSSDvlPriority
OBJECT-TYPE
A user priority, used for this VLAN on tagged ports.
1.3.6.1.4.1.89.35.1.63.1.1.1.7INTEGER {low(1), high(2)}read-writemandatory
rsSSDvlUpCriterion
OBJECT-TYPE
The criterion according to which the vlan interface is considered to be up for interface grouping.
1.3.6.1.4.1.89.35.1.63.1.1.1.8INTEGER {defaultByType(1), onePort(2), allPorts(3)}read-writemandatory
rsSSDvlDownCriterion
OBJECT-TYPE
The criterion according to which the vlan interface is considered to be down for interface grouping.
1.3.6.1.4.1.89.35.1.63.1.1.1.9INTEGER {defaultByType(1), onePort(2), allPorts(3)}read-writemandatory
rsSSDvirtualLanPortsTable
OBJECT-TYPE
For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
1.3.6.1.4.1.89.35.1.63.1.2not-accessiblemandatory
rsSSDvirtualLanPortEntry
OBJECT-TYPE
A entry of this table specifies a VL and a port belonging to it
1.3.6.1.4.1.89.35.1.63.1.2.1not-accessiblemandatory
rsSSDvLIfIndex
OBJECT-TYPE
An logical interface number, corresponding to this VL
1.3.6.1.4.1.89.35.1.63.1.2.1.1INTEGERread-writemandatory
rsSSDvLPortIfIndex
OBJECT-TYPE
A physical port belonging to the VL specified by rsSSDvlIfIndex.
1.3.6.1.4.1.89.35.1.63.1.2.1.2INTEGERread-writemandatory
rsSSDvLPortType
OBJECT-TYPE
static means configured by user dynamic means autoconfigured by the RS
1.3.6.1.4.1.89.35.1.63.1.2.1.3INTEGER {static(1), dynamic(2)}read-onlymandatory
rsSSDvLPortStatus
OBJECT-TYPE
It is used to delete an entry
1.3.6.1.4.1.89.35.1.63.1.2.1.4RowStatusread-writemandatory
rsSSDvLPortTag
OBJECT-TYPE
This variable indicate if the port is tagged or untagged
1.3.6.1.4.1.89.35.1.63.1.2.1.5INTEGER {untag(1), tag(2)}read-writemandatory
rsSSDvLPortInterfaceGroupingState
OBJECT-TYPE
included- the port effects the VLAN Up/Down decision for interface grouping. excluded- the port does not effect the VLAN Up/Down decision for interface grouping.
1.3.6.1.4.1.89.35.1.63.1.2.1.6INTEGER {included(1), excluded(2)}read-writemandatory
rsWSDThresholdWarnings
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.64
rsWSDThreshTrapFloodDelay
OBJECT-TYPE
This variable defines how far (in seconds) will 2 Threshold Warning Traps be spaced for the same Threshold Warning Type. Default = 0, i.e. DISABLED
1.3.6.1.4.1.89.35.1.64.1INTEGER (0..3600)read-writemandatory
rsWSDCriticalTrapFloodDelay
OBJECT-TYPE
This variable defines how far (in seconds) will 2 Critical Warning Traps be spaced (of any type). Default = 20 seconds.
1.3.6.1.4.1.89.35.1.64.2INTEGER (1..3600)read-writemandatory
rsIDS
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.65
rsWSDLicense
OBJECT-TYPE
The new licence for the device
1.3.6.1.4.1.89.35.1.66DisplayString (SIZE(1..80))read-writemandatory
rsErrMailParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.67
rsErrMailEnable
OBJECT-TYPE
Send email on errors enable
1.3.6.1.4.1.89.35.1.67.1INTEGER {enable(1), disable(2)}read-writemandatory
rsErrMailGateway
OBJECT-TYPE
primary SMTP gateway for error mail
1.3.6.1.4.1.89.35.1.67.2IpAddressread-writemandatory
rsErrMailSrcAddress
OBJECT-TYPE
source address to be used by device for outgoing mail
1.3.6.1.4.1.89.35.1.67.3DisplayString (SIZE(1..64))read-writemandatory
rsErrMailToFieldText
OBJECT-TYPE
Display name in 'TO:' field used by device for outgoing mail. When empty the text in the To field is generated by the device according to the message severity.
1.3.6.1.4.1.89.35.1.67.4DisplayString (SIZE(0..255))read-writemandatory
rsWSDWebParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.68
rsWSDWebPort
OBJECT-TYPE
The Web Server Port.
1.3.6.1.4.1.89.35.1.68.1INTEGERread-writemandatory
rsWSDWebStatus
OBJECT-TYPE
Web Status. Enable/Disable Web operation.
1.3.6.1.4.1.89.35.1.68.2INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDWebHelpLocation
OBJECT-TYPE
Location of the help files directory.
1.3.6.1.4.1.89.35.1.68.3DisplayString (SIZE(0..80))read-writemandatory
rsWSDWebSSLPort
OBJECT-TYPE
SSL Port
1.3.6.1.4.1.89.35.1.68.4INTEGER (1..65535)read-writemandatory
rsWSDWebSSLStatus
OBJECT-TYPE
Web SSL Status. Enable/Disable Web SSL operation.
1.3.6.1.4.1.89.35.1.68.5INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDWebSSLPrivateKeyFile
OBJECT-TYPE
File name of the private key file used by the web server.
1.3.6.1.4.1.89.35.1.68.6DisplayString (SIZE(0..80))read-writemandatory
rsWSDWebSSLCertificateFile
OBJECT-TYPE
File name of the certificate file used by the web server.
1.3.6.1.4.1.89.35.1.68.7DisplayString (SIZE(0..80))read-writemandatory
rsWSDWebSSLCaFile
OBJECT-TYPE
File name of the CAfile used by the web server.
1.3.6.1.4.1.89.35.1.68.8DisplayString (SIZE(0..80))read-writemandatory
rsWSDWebSSLCaPath
OBJECT-TYPE
Directory where the CA certificates are stored.
1.3.6.1.4.1.89.35.1.68.9DisplayString (SIZE(0..80))read-writemandatory
rsWSDWebSSLClientAuthentication
OBJECT-TYPE
Type of client authentication.
1.3.6.1.4.1.89.35.1.68.10INTEGER {password(1), certificate(2)}read-writemandatory
rsWSDWebAccessLevel
OBJECT-TYPE
Determines whether web server allows read-only or also write access. In read-only mode some pages will not be available.
1.3.6.1.4.1.89.35.1.68.11INTEGER {readOnly(1), readWrite(2)}read-writemandatory
rsWSDWebSoapSupportStatus
OBJECT-TYPE
Whether the devices support of web services is enabled or not.
1.3.6.1.4.1.89.35.1.68.12INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDWebSSLWeakCiphersSupportStatus
OBJECT-TYPE
Determines whether the secure web server allows SSL connections using weak ciphers security access.
1.3.6.1.4.1.89.35.1.68.13INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSysParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.69
rsWSDSysFlashSize
OBJECT-TYPE
The flash size of the device in mega bytes.
1.3.6.1.4.1.89.35.1.69.1INTEGERread-onlymandatory
rsWSDSysUpTime
OBJECT-TYPE
Time since the system was last reinitialized in a convenient format.
1.3.6.1.4.1.89.35.1.69.2DisplayStringread-onlymandatory
rsWSDSysManagedTime
OBJECT-TYPE
The time will be sent in the format hh:mm:ss
1.3.6.1.4.1.89.35.1.69.3DisplayString (SIZE(0..80))read-writemandatory
rsWSDSysManagedDate
OBJECT-TYPE
The date will be sent in the format dd/mm/yyyy
1.3.6.1.4.1.89.35.1.69.4DisplayString (SIZE(0..80))read-writemandatory
rsWSDSysBaseMACAddress
OBJECT-TYPE
Base MAC address of the device
1.3.6.1.4.1.89.35.1.69.5DisplayString (SIZE(17))read-writemandatory
rdwrDualPowerSupplyParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.69.6
rdwrPowerSupply1Status
OBJECT-TYPE
Status of power supply 1. Relevant only for dual power supply devices. On single power supply devices the status returned is invalid.
1.3.6.1.4.1.89.35.1.69.6.1INTEGER {active(1), notInService(2), invalid(3)}read-onlymandatory
rdwrPowerSupply2Status
OBJECT-TYPE
Status of power supply 2. Relevant only for dual power supply devices. On single power supply devices the status returned is invalid.
1.3.6.1.4.1.89.35.1.69.6.2INTEGER {active(1), notInService(2), invalid(3)}read-onlymandatory
rdwrPowerSupplyTrapStatus
OBJECT-TYPE
Enables the user to disable the sending of traps for the power supply status
1.3.6.1.4.1.89.35.1.69.6.3FeatureStatusread-writemandatory
rdwrPowerSupplyStatus
OBJECT-TYPE
The status of the power supply
1.3.6.1.4.1.89.35.1.69.6.4INTEGER {singlePowerSupplyOk(1), firstPowerSupplyFailed(2), secondPowerSupplyFailed(3), doublePowerSupplyOk(4), unknownPowerSupplyFailed(5)}read-onlymandatory
rsWSDLicenseID
OBJECT-TYPE
License ID used for license downgrade
1.3.6.1.4.1.89.35.1.70DisplayString (SIZE(1..80))read-onlymandatory
rsWSDSendFakeArp
OBJECT-TYPE
Controls whether a backup will send a fake ARP, advertising the main box's interfaces and VIPs, when the main box returns to service.
1.3.6.1.4.1.89.35.1.71INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDNTP
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.72
rsWSDNTPServerAddr
OBJECT-TYPE
Server IP address.
1.3.6.1.4.1.89.35.1.72.1IpAddressread-writemandatory
rsWSDNTPInterval
OBJECT-TYPE
Time update interval.
1.3.6.1.4.1.89.35.1.72.2INTEGERread-writemandatory
rsWSDNTPStatus
OBJECT-TYPE
Enable status for NTP synchronization.
1.3.6.1.4.1.89.35.1.72.3INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDNTPTimeZone
OBJECT-TYPE
Offset from Greenwich time (format hh:mm).
1.3.6.1.4.1.89.35.1.72.4DisplayString (SIZE(1..6))read-writemandatory
rsWSDNTPPort
OBJECT-TYPE
A UDP Port number.
1.3.6.1.4.1.89.35.1.72.5INTEGERread-writemandatory
rsWSDNTPServerUrl
OBJECT-TYPE
NTP Server URL or IP address.
1.3.6.1.4.1.89.35.1.72.6DisplayString (SIZE(0..64))read-writemandatory
rsStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.73
rsPhysPortMirrorTable
OBJECT-TYPE
Table containing the list of copy ports
1.3.6.1.4.1.89.35.1.74not-accessiblemandatory
rsPhysPortMirrorEntry
OBJECT-TYPE
The row definition for physical copy port table.
1.3.6.1.4.1.89.35.1.74.1not-accessiblemandatory
rsPhysPortMirrorSrcInf
OBJECT-TYPE
The port under sniffing
1.3.6.1.4.1.89.35.1.74.1.1INTEGERread-onlymandatory
rsPhysPortMirrorDstPort
OBJECT-TYPE
The destination port - the target sniffer port
1.3.6.1.4.1.89.35.1.74.1.2INTEGERread-onlymandatory
rsPhysPortMirrorRxTx
OBJECT-TYPE
Copy Rx/Tx traffic to the copy port .
1.3.6.1.4.1.89.35.1.74.1.3INTEGER {copyRxTx(1), copyRxOnly(2), copyTxOnly(3)}read-writemandatory
rsPhysPortMirrorRxBroadCast
OBJECT-TYPE
The copy will include broadcast/unknown or not
1.3.6.1.4.1.89.35.1.74.1.4INTEGER {enable(1), disable(2)}read-writemandatory
rsPhysPortMirrorStatus
OBJECT-TYPE
Used to delete an entry of this table.
1.3.6.1.4.1.89.35.1.74.1.5RowStatusread-writemandatory
rsPhysPortMirrorBackupDstPort
OBJECT-TYPE
The destination port - the target sniffer port
1.3.6.1.4.1.89.35.1.74.1.6INTEGERread-writemandatory
rsPhysPortMirrorDstStatus
OBJECT-TYPE
The status of the dest-port according to the health check: active - the port is ok and can be used as a destination port for copy-port portDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP checkIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently checkIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN.
1.3.6.1.4.1.89.35.1.74.1.7INTEGER {active(1), portDown(2), checkIDSFail(3), checkIDSFailAndPortDown(4)}read-onlymandatory
rsPhysPortMirrorBackupStatus
OBJECT-TYPE
The status of the backup-port according to the health check: Active - the port is ok and can be used as a destination port for copy-port PortDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP CheckIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently CheckIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN None - for the case there is no defined backup port.
1.3.6.1.4.1.89.35.1.74.1.8INTEGER {active(1), portDown(2), checkIDSFail(3), checkIDSFailAndPortDown(4), none(5)}read-onlymandatory
rsPhysPortMirrorActiveDstPort
OBJECT-TYPE
The active dest-port at a certain time, if it is the dest-port or the backup-port or none of them.
1.3.6.1.4.1.89.35.1.74.1.9INTEGER {dstPort(1), backupPort(2), none(3)}read-onlymandatory
rsPhysPortMirrorMode
OBJECT-TYPE
Always copy or copy according to threshold
1.3.6.1.4.1.89.35.1.74.1.10INTEGER {enabled(1), traffic-rate(2)}read-writemandatory
rsPhysPortMirrorThreshold
OBJECT-TYPE
The copy threshold
1.3.6.1.4.1.89.35.1.74.1.11INTEGERread-writemandatory
rsPhysPortMirrorThresholdStatus
OBJECT-TYPE
The threshold status
1.3.6.1.4.1.89.35.1.74.1.12INTEGER {waiting(1), active(2), elapsed(3)}read-onlymandatory
rsCP
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.75
rsVWSD
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.76
rsVWSDDataPermissionsTable
OBJECT-TYPE
Table containing the list of data items to which Farm administrators of the virtual wsd has permissions.
1.3.6.1.4.1.89.35.1.76.1not-accessiblemandatory
rsVWSDDataPermissionsTableEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.76.1.1not-accessiblemandatory
rsVWSDUserGroup
OBJECT-TYPE
The Group of users for whom data permission is given.
1.3.6.1.4.1.89.35.1.76.1.1.1DisplayString (SIZE(1..30))read-onlymandatory
rsVWSDDataType
OBJECT-TYPE
Holds a string that identifies the table of the index by which the data filtering is done.
1.3.6.1.4.1.89.35.1.76.1.1.2OCTET STRING (SIZE(1..80))read-onlymandatory
rsVWSDDataItems
OBJECT-TYPE
The Value(s) of the index column for the data item to which permission is set.
1.3.6.1.4.1.89.35.1.76.1.1.3OCTET STRING (SIZE(1..80))read-onlymandatory
rsVWSDDataStatus
OBJECT-TYPE
The row status for the table
1.3.6.1.4.1.89.35.1.76.1.1.4RowStatusread-writemandatory
rsWSDManagementPorts
OBJECT-TYPE
The entry indicates the functionality of the device. outOfPath implies that the device will be able to have a management port, and the rest of the ports will be used for sniffing. switch implies the regular functionality of the device (router or VLAN). promiscuous will have static port mappings for forwarding.
1.3.6.1.4.1.89.35.1.77INTEGER {outOfPath(1), switch(2), promiscuous(3)}read-writemandatory
rsWSDManagementPortsTable
OBJECT-TYPE
Table containing the operation of each port..
1.3.6.1.4.1.89.35.1.78not-accessiblemandatory
rsWSDManagementPortsEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.78.1not-accessiblemandatory
rsWSDPortIndex
OBJECT-TYPE
The index of the physical ports.
1.3.6.1.4.1.89.35.1.78.1.1INTEGERread-onlymandatory
rsWSDPortOperation
OBJECT-TYPE
The operation of the particular port.
1.3.6.1.4.1.89.35.1.78.1.2INTEGER {management(1), sniffer(2)}read-onlymandatory
rsCCK
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.79
rsWSDSshParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.80
rsWSDSshPort
OBJECT-TYPE
The SSH Server Port.
1.3.6.1.4.1.89.35.1.80.1INTEGERread-writemandatory
rsWSDSshStatus
OBJECT-TYPE
SSH Status. Enable/Disable SSH operation.
1.3.6.1.4.1.89.35.1.80.2INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDSshAllowPwdAndPubKey
OBJECT-TYPE
SSH allow the use of password for user with public key.
1.3.6.1.4.1.89.35.1.80.3INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDHttpsParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.81
rsWSDHttpsPort
OBJECT-TYPE
The Https Server Port.
1.3.6.1.4.1.89.35.1.81.1INTEGERread-writemandatory
rsWSDHttpsStatus
OBJECT-TYPE
Https Status. Enable/Disable Https operation.
1.3.6.1.4.1.89.35.1.81.2INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDStaticForwardingTable
OBJECT-TYPE
Table containing the static fowarding configration.
1.3.6.1.4.1.89.35.1.82not-accessiblemandatory
rsWSDStaticForwardingEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.82.1not-accessiblemandatory
rsWSDStaticSourcePort
OBJECT-TYPE
The index of the source port.
1.3.6.1.4.1.89.35.1.82.1.1INTEGERread-onlymandatory
rsWSDStaticDestinationPort
OBJECT-TYPE
The destination port.
1.3.6.1.4.1.89.35.1.82.1.2INTEGERread-writemandatory
rsWSDStaticPortOperation
OBJECT-TYPE
The operation for the specific port. process implies that the packets will be processed (analyzed, filtered etc.) prior to being forwarded. forward implies that the packets will be forwarded.
1.3.6.1.4.1.89.35.1.82.1.3INTEGER {process(1), forward(2)}read-writemandatory
rsWSDStaticStatus
OBJECT-TYPE
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
1.3.6.1.4.1.89.35.1.82.1.4RowStatusread-writemandatory
rsWSDStaticFailureMode
OBJECT-TYPE
The link state in case the device fails. fail-open: allow traffic to continue to flow unimpeded fail-close: traffic is blocked.
1.3.6.1.4.1.89.35.1.82.1.5INTEGER {fail-close(1), fail-open(2)}read-writemandatory
rsWSDStaticInPort
OBJECT-TYPE
This field is needed for Apsolute Vision.
1.3.6.1.4.1.89.35.1.82.1.6INTEGER {source(1), destination(2)}read-writemandatory
rsRadiusServer
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.83
rsRadiusMainServerAddr
OBJECT-TYPE
The IP Address of the radius main server.
1.3.6.1.4.1.89.35.1.83.1IpAddressread-writemandatory
rsRadiusMainServerPort
OBJECT-TYPE
The port on which the radius main server listens
1.3.6.1.4.1.89.35.1.83.2INTEGERread-writemandatory
rsRadiusMainServerSecret
OBJECT-TYPE
The key with which the user's password is encrypted.
1.3.6.1.4.1.89.35.1.83.3DisplayString (SIZE(0..100))read-writemandatory
rsRadiusBackupServerAddr
OBJECT-TYPE
The IP Address of the backup radius server.
1.3.6.1.4.1.89.35.1.83.4IpAddressread-writemandatory
rsRadiusBackupServerPort
OBJECT-TYPE
The port on which the radius backup server listens
1.3.6.1.4.1.89.35.1.83.5INTEGERread-writemandatory
rsRadiusBackupServerSecret
OBJECT-TYPE
The key with which the user's password is encrypted.
1.3.6.1.4.1.89.35.1.83.6DisplayString (SIZE(0..100))read-writemandatory
rsAuthenticationMethod
OBJECT-TYPE
Radius authentication method.
1.3.6.1.4.1.89.35.1.83.7INTEGER {userTable(1), radius(2), radiusAndUserTable(3), tacacsAndUserTable(4)}read-writemandatory
rsRadiusServerTimeout
OBJECT-TYPE
Number of seconds to wait for reply from the radius server before retransmitting the request.
1.3.6.1.4.1.89.35.1.83.8INTEGER (1..10)read-writemandatory
rsRadiusServerRetries
OBJECT-TYPE
Minimal number of unanswered request attempts before considering the radius server disconnected.
1.3.6.1.4.1.89.35.1.83.9INTEGER (1..3)read-writemandatory
rsLockUserAfterLoginFailure
OBJECT-TYPE
Number of failed access attempts after which the user is locked out and cannot manage the device. 0 - never lock users.
1.3.6.1.4.1.89.35.1.83.10INTEGER (0..10)read-writemandatory
rsRadiusClientLifeTime
OBJECT-TYPE
Number of seconds for which radius authentication replies are cached. During this time the device will use the cached response and not issue authentication requests for the user.
1.3.6.1.4.1.89.35.1.83.11INTEGERread-writemandatory
rsRadiusMainServerUrl
OBJECT-TYPE
The URL or IP Address of the radius main server.
1.3.6.1.4.1.89.35.1.83.12DisplayString (SIZE(0..64))read-writemandatory
rsRadiusBackupServerUrl
OBJECT-TYPE
The URL or IP Address of the backup radius server.
1.3.6.1.4.1.89.35.1.83.13DisplayString (SIZE(0..64))read-writemandatory
rspRadiusParameters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.83.14
rspRadiusPrimaryAddr
OBJECT-TYPE
Primary Radius server URL or IP address.
1.3.6.1.4.1.89.35.1.83.14.1DisplayString (SIZE(0..64))read-writemandatory
rspRadiusPrimaryAuthPort
OBJECT-TYPE
Primary Radius server authentication port.
1.3.6.1.4.1.89.35.1.83.14.2INTEGERread-writemandatory
rspRadiusPrimaryAccPort
OBJECT-TYPE
Primary Radius server accounting port.
1.3.6.1.4.1.89.35.1.83.14.3INTEGERread-writemandatory
rspRadiusPrimarySecret
OBJECT-TYPE
CID and Primary Radius shared secret
1.3.6.1.4.1.89.35.1.83.14.4DisplayString (SIZE(0..64))read-writemandatory
rspRadiusAltAddr
OBJECT-TYPE
Alternate Radius server URL or IP address.
1.3.6.1.4.1.89.35.1.83.14.5DisplayString (SIZE(0..64))read-writemandatory
rspRadiusAltAuthPort
OBJECT-TYPE
Alternate Radius server authentication port.
1.3.6.1.4.1.89.35.1.83.14.6INTEGERread-writemandatory
rspRadiusAltAccPort
OBJECT-TYPE
Alternate Radius server accounting port.
1.3.6.1.4.1.89.35.1.83.14.7INTEGERread-writemandatory
rspRadiusAltSecret
OBJECT-TYPE
CID and Alternate Radius shared secret
1.3.6.1.4.1.89.35.1.83.14.8DisplayString (SIZE(0..64))read-writemandatory
rspRadiusOwnAuthPort
OBJECT-TYPE
Own Radius proxy authentication port.
1.3.6.1.4.1.89.35.1.83.14.9INTEGERread-writemandatory
rspRadiusOwnAccPort
OBJECT-TYPE
Own Radius proxy accounting port.
1.3.6.1.4.1.89.35.1.83.14.10INTEGERread-writemandatory
rspRadiusEnable
OBJECT-TYPE
Proxy Radius resolution enable.
1.3.6.1.4.1.89.35.1.83.14.11INTEGER {enable(1), disable(2)}read-writemandatory
rspRadiusTransparentEnable
OBJECT-TYPE
Proxy Radius transparent mode resolution enable.
1.3.6.1.4.1.89.35.1.83.14.12INTEGER {enable(1), disable(2)}read-writemandatory
rspRadiusRuleTable
OBJECT-TYPE
The attribute action table
1.3.6.1.4.1.89.35.1.83.14.13not-accessiblemandatory
rspRadiusRuleEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.83.14.13.1not-accessiblemandatory
rspRadiusattId
OBJECT-TYPE
Attribute ID of the message to/from the RADIUS
1.3.6.1.4.1.89.35.1.83.14.13.1.1INTEGERread-onlymandatory
rspRadiusattValue
OBJECT-TYPE
Attribute value of the message to/from the RADIUS
1.3.6.1.4.1.89.35.1.83.14.13.1.2DisplayString (SIZE(1..64))read-onlymandatory
rspRadiusNetworkName
OBJECT-TYPE
The name of the network that the rule applied to
1.3.6.1.4.1.89.35.1.83.14.13.1.3DisplayString (SIZE(1..64))read-onlymandatory
rspRadiusrowStatus
OBJECT-TYPE
Administrative status.
1.3.6.1.4.1.89.35.1.83.14.13.1.4RowStatusread-writemandatory
rspRadiusNasTable
OBJECT-TYPE
The NAS IP/Secret table
1.3.6.1.4.1.89.35.1.83.14.14not-accessiblemandatory
rspRadiusNasEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.83.14.14.1not-accessiblemandatory
rspRadiusNasIp
OBJECT-TYPE
The IP of this NAS
1.3.6.1.4.1.89.35.1.83.14.14.1.1IpAddressread-onlymandatory
rspRadiusNasSecret
OBJECT-TYPE
The secret of this NAS
1.3.6.1.4.1.89.35.1.83.14.14.1.2DisplayString (SIZE(0..64))read-writemandatory
rspRadiusNasrowStatus
OBJECT-TYPE
Administrative status.
1.3.6.1.4.1.89.35.1.83.14.14.1.3RowStatusread-writemandatory
rspRadiusUserMirrorProtocolMode
OBJECT-TYPE
The status of the mirroring for Radius proxy.
1.3.6.1.4.1.89.35.1.83.14.15INTEGER {enable(1), disable(2)}read-writemandatory
rspRadiusUserMirrorPollingTime
OBJECT-TYPE
The polling time of the Radius users table.
1.3.6.1.4.1.89.35.1.83.14.16INTEGERread-writemandatory
rspRadiusNetworkUpdatePolicy
OBJECT-TYPE
Define the way the device treats new user network. Replace - the device replaces current network and update the user policy. Add -the device adds the network to the user entry. The device supports up to fine simultaneous networks for each entry
1.3.6.1.4.1.89.35.1.83.14.17INTEGER {replace(1), add(2)}read-writemandatory
rsIfTable
OBJECT-TYPE
Device physical interface table
1.3.6.1.4.1.89.35.1.84not-accessiblemandatory
rsIfEntry
OBJECT-TYPE
The row definition for this table
1.3.6.1.4.1.89.35.1.84.1not-accessiblemandatory
rsIfIndex
OBJECT-TYPE
interface's index
1.3.6.1.4.1.89.35.1.84.1.1INTEGERread-onlymandatory
rsIfSpeed
OBJECT-TYPE
interface's speed
1.3.6.1.4.1.89.35.1.84.1.2INTEGER {auto(0), eth10(1), fe100(2), ge1000(3), xg10000(4), qxg10000(5)}read-writemandatory
rsIfDuplex
OBJECT-TYPE
interface's duplex
1.3.6.1.4.1.89.35.1.84.1.3INTEGER {half(1), full(2)}read-writemandatory
rsIfAutoNegotiate
OBJECT-TYPE
interface's autonegotiation status
1.3.6.1.4.1.89.35.1.84.1.4INTEGER {auto(0), on(1), off(2)}read-writemandatory
rsIfAutoNegotiateCfg
OBJECT-TYPE
interface's autonegotiation status
1.3.6.1.4.1.89.35.1.84.1.5INTEGER {auto(0), on(1), off(2)}read-writemandatory
rsWSDDeviceOperationMode
OBJECT-TYPE
Device operation mode: redirection (load balancing) or static forwarding (Dos Shield), or transparent forwarding (for IDS load balancing).
1.3.6.1.4.1.89.35.1.85INTEGER {trafficRedirection(1), staticForwarding(2), transparentForwarding(3)}read-writemandatory
rsWSDVersionStatus
OBJECT-TYPE
Indicates whether the current version is closed or still open (under development).
1.3.6.1.4.1.89.35.1.86INTEGER {open(1), final(2)}read-onlymandatory
rsWSDSyslogFacility
OBJECT-TYPE
The SYSLOG Priority value is calculated by multiplying the Facility number by 8 and then adding the numerical value of the Severity.
1.3.6.1.4.1.89.35.1.87INTEGER {kernelMsg(0), userLevelMsg(1), mailSystem(2), systemDaemons(3), authorization(4), syslogdMessages(5), linePrinter(6), networkNews(7), uucp(8), clockDaemon1(9), security(10), ftpDaemon(11), ntpSubsystem(12), logAudit(13), logAlert(14), clockDaemon2(15), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)}read-writemandatory
rsACC
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.88
rsWSDPingPortsTable
OBJECT-TYPE
The table contains all the physical ports. Each port can be set to allow/block Ping operations to the device.
1.3.6.1.4.1.89.35.1.89not-accessiblemandatory
rsWSDPingPortsEntry
OBJECT-TYPE
Row definition for the table.
1.3.6.1.4.1.89.35.1.89.1not-accessiblemandatory
rsWSDPingPhysicalPortNumber
OBJECT-TYPE
Physical port number.
1.3.6.1.4.1.89.35.1.89.1.1INTEGERread-onlymandatory
rsWSDPingPhysicalPortState
OBJECT-TYPE
enable - accept Ping operations on the physical port. disable - ignore Ping opertaions on the physical port.
1.3.6.1.4.1.89.35.1.89.1.2INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDBackupInterfaceGrouping
OBJECT-TYPE
When Backup Interface Grouping is enabled, the backup will take all interfaces when all of the main's interfaces are down. It will also release all interfaces at the same time when all the main's are up.
1.3.6.1.4.1.89.35.1.90INTEGER {enable(1), disable(2)}read-writemandatory
rsRegistrationStatus
OBJECT-TYPE
Indicates whether the device has been registered. The NMS is expected to set it after successful registration.
1.3.6.1.4.1.89.35.1.91INTEGER {registered(1), notRegistered(2)}read-writemandatory
rsCT100
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.92
rsFloatingPacketOffset
OBJECT-TYPE
Indicates whether the incoming packet offset may be changed by the application. This is not needed in most cases but is required for tagging of outgoing packets (802.1q) and packet encapsulation.
1.3.6.1.4.1.89.35.1.93INTEGER {enable(1), disable(2)}read-writemandatory
rsDnsParameters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.94
rsDnsrParameters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.94.1
rsDnsrPrimaryAddr
OBJECT-TYPE
Primary DNS server IP address.
1.3.6.1.4.1.89.35.1.94.1.1IpAddressread-writemandatory
rsDnsrAlternateAddr
OBJECT-TYPE
Alternate DNS server IP address.
1.3.6.1.4.1.89.35.1.94.1.2IpAddressread-writemandatory
rsDnsrEnable
OBJECT-TYPE
DNS resolution enable.
1.3.6.1.4.1.89.35.1.94.1.3INTEGER {enable(1), disable(2)}read-writemandatory
rsDnsrStaticResTable
OBJECT-TYPE
DNS Static resolution table. The table containing URL/IP Pairs. The DNS resolver use this table in the resolution process.
1.3.6.1.4.1.89.35.1.94.1.4not-accessiblemandatory
rsDnsrStaticResEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.94.1.4.1not-accessiblemandatory
rsDnsrSUrl
OBJECT-TYPE
The URL string in the static URL/IP resolution table.
1.3.6.1.4.1.89.35.1.94.1.4.1.1DisplayString (SIZE(1..49))read-onlymandatory
rsDnsrSIp
OBJECT-TYPE
The IP Address in the static URL/IP resolution table.
1.3.6.1.4.1.89.35.1.94.1.4.1.2IpAddressread-writemandatory
rsDnsrSrowStatus
OBJECT-TYPE
Administrative status.
1.3.6.1.4.1.89.35.1.94.1.4.1.3RowStatusread-writemandatory
rsDnsServerParameters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.94.2
rsDnsServerEnable
OBJECT-TYPE
DNS server enable.
1.3.6.1.4.1.89.35.1.94.2.1INTEGER {enable(1), disable(2)}read-writemandatory
rsDnsServerStaticResTable
OBJECT-TYPE
DNS Static resolution table. The table containing URL/IP Pairs. The DNS server use this table to look form farms IP.
1.3.6.1.4.1.89.35.1.94.2.2not-accessiblemandatory
rsDnsServerStaticResEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.94.2.2.1not-accessiblemandatory
rsDnsServerSUrl
OBJECT-TYPE
The URL string in the static URL/IP resolution table.
1.3.6.1.4.1.89.35.1.94.2.2.1.1DisplayString (SIZE(1..80))read-onlymandatory
rsDnsServerSIp
OBJECT-TYPE
The IP Address in the static URL/IP resolution table.
1.3.6.1.4.1.89.35.1.94.2.2.1.2IpAddressread-writemandatory
rsDnsServerSEnable
OBJECT-TYPE
Mark if the entry is enabled for the DNS server.
1.3.6.1.4.1.89.35.1.94.2.2.1.3INTEGER {enable(1), disable(2)}read-writemandatory
rsDnsServerSrowStatus
OBJECT-TYPE
Administrative status.
1.3.6.1.4.1.89.35.1.94.2.2.1.4RowStatusread-writemandatory
rsPrivateCheckSNMPPort
OBJECT-TYPE
Destination SNMP port used for private and NT checks.
1.3.6.1.4.1.89.35.1.95INTEGER (1..65535)read-writemandatory
rsVlanTagHandling
OBJECT-TYPE
Determine how to handle incoming tagged packets: forward them with the original tags or overwrite the tags with new ones before forwarding. Note that overwrite may in some cases simply remove the tag.
1.3.6.1.4.1.89.35.1.96INTEGER {retain(1), overwrite(2)}read-writemandatory
rsSmtpParameters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.97
rsSmtpPrimaryAddr
OBJECT-TYPE
Primary SMTP server address.
1.3.6.1.4.1.89.35.1.97.1DisplayString (SIZE(0..64))read-writemandatory
rsSmtpAlternateAddr
OBJECT-TYPE
Alternate SMTP server address.
1.3.6.1.4.1.89.35.1.97.2DisplayString (SIZE(0..64))read-writemandatory
rsSmtpEnable
OBJECT-TYPE
SMTP task enable.
1.3.6.1.4.1.89.35.1.97.3INTEGER {enable(1), disable(2)}read-writemandatory
rsSmtpOwnAddr
OBJECT-TYPE
Our own Email address
1.3.6.1.4.1.89.35.1.97.4DisplayString (SIZE(0..64))read-writemandatory
rsSmtpBackupOwnAddr
OBJECT-TYPE
Backup device own Email address
1.3.6.1.4.1.89.35.1.97.5DisplayString (SIZE(0..64))read-writemandatory
rsWSDSyslogUrl
OBJECT-TYPE
The URL/IP Address of the syslog station.
1.3.6.1.4.1.89.35.1.98DisplayString (SIZE(0..64))read-writemandatory
rsFileSystem
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.99
rsFSapplList
OBJECT-TYPE
An entry of this table specifies an an application on the compact flash.
1.3.6.1.4.1.89.35.1.99.1not-accessiblemandatory
rsFSapplEntry
OBJECT-TYPE
A list of information for each application.
1.3.6.1.4.1.89.35.1.99.1.1not-accessiblemandatory
rsFSapplName
OBJECT-TYPE
The application name
1.3.6.1.4.1.89.35.1.99.1.1.1DisplayString (SIZE(1..60))read-onlymandatory
rsFSapplIndex
OBJECT-TYPE
The application index number as appears on the compact flash.
1.3.6.1.4.1.89.35.1.99.1.1.2INTEGERread-onlymandatory
rsFSapplValid
OBJECT-TYPE
Indicate whether the application is valid or not: true(1) : Application is valid - can be set to active false(2): Application is invalid - indicates a problem in the upgrade process or installation, user should download a new version.
1.3.6.1.4.1.89.35.1.99.1.1.3TruthValueread-onlymandatory
rsFSapplActive
OBJECT-TYPE
Indicate or set the application as the current active application: true(1): active application false(2): not the active application.
1.3.6.1.4.1.89.35.1.99.1.1.4TruthValueread-writemandatory
rsFSapplVersion
OBJECT-TYPE
The major version of the application.
1.3.6.1.4.1.89.35.1.99.1.1.5DisplayString (SIZE(1..20))read-onlymandatory
rsFSapplStartup
OBJECT-TYPE
Indicate whether the application is the startup application: true(1) : startup application false(2): not the startup application.
1.3.6.1.4.1.89.35.1.99.1.1.6TruthValueread-onlymandatory
rsFSapplStatus
OBJECT-TYPE
delete/update an entry
1.3.6.1.4.1.89.35.1.99.1.1.7RowStatusread-writemandatory
rsFSinstallNew
OBJECT-TYPE
Enable/Disable - automatic make new downloaded application the default.
1.3.6.1.4.1.89.35.1.99.2INTEGER {enable(1), disable(2)}read-writemandatory
rdwrConfigurationFileTable
OBJECT-TYPE
A table holding information about configuration files.
1.3.6.1.4.1.89.35.1.99.3not-accessiblemandatory
rdwrConfigurationFileEntry
OBJECT-TYPE
An entry in the table of configuration files
1.3.6.1.4.1.89.35.1.99.3.1not-accessiblemandatory
rdwrConfigurationFileApp
OBJECT-TYPE
The application the configuration file belongs to.
1.3.6.1.4.1.89.35.1.99.3.1.1DisplayString (SIZE(1..128))read-onlymandatory
rdwrConfigurationFileName
OBJECT-TYPE
The name of the configuration file relative to a predefined directory holding all configuration files for a specific application.
1.3.6.1.4.1.89.35.1.99.3.1.2DisplayString (SIZE(1..128))read-onlymandatory
rdwrConfigurationFileRunning
OBJECT-TYPE
Indicate whether this is the currently running configuration.
1.3.6.1.4.1.89.35.1.99.3.1.3TruthValueread-onlymandatory
rdwrConfigurationFileInstalled
OBJECT-TYPE
Indicate whether this is the currently installed configuration, i.e. the configuration which will be associated to it's application after reset.
1.3.6.1.4.1.89.35.1.99.3.1.4TruthValueread-onlymandatory
rdwrConfigurationFilePath
OBJECT-TYPE
The absolute path of the configuration file. When creating a new entry in this table the path must be present and indicates where the file is to be taken from.
1.3.6.1.4.1.89.35.1.99.3.1.5DisplayString (SIZE(0..128))read-writemandatory
rdwrConfigurationFileAction
OBJECT-TYPE
The required operation needed on the configuration file.
1.3.6.1.4.1.89.35.1.99.3.1.6INTEGER {none(1), add(2), install(3), delete(4)}read-writemandatory
rdwrConfigurationFileStatus
OBJECT-TYPE
Operation to be performed on a specific configuration file.
1.3.6.1.4.1.89.35.1.99.3.1.7RowStatusread-writemandatory
rdwrDefCfg
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.99.4
rdwrDefCfgIpAddress
OBJECT-TYPE
The default IP address of the device
1.3.6.1.4.1.89.35.1.99.4.1IpAddressread-writemandatory
rdwrDefCfgIpMask
OBJECT-TYPE
The default IP mask of the device
1.3.6.1.4.1.89.35.1.99.4.2IpAddressread-writemandatory
rdwrDefCfgPort
OBJECT-TYPE
The default port number of the device
1.3.6.1.4.1.89.35.1.99.4.3INTEGERread-writemandatory
rdwrDefCfgGateway
OBJECT-TYPE
The default gatewary address of the device
1.3.6.1.4.1.89.35.1.99.4.4IpAddressread-writemandatory
rdwrDefCfgUserName
OBJECT-TYPE
The default root user name
1.3.6.1.4.1.89.35.1.99.4.5DisplayString (SIZE(0..30))read-writemandatory
rdwrDefCfgUserPassword
OBJECT-TYPE
The default root user password
1.3.6.1.4.1.89.35.1.99.4.6DisplayString (SIZE(0..64))read-writemandatory
rdwrDefCfgCommunity
OBJECT-TYPE
The default community string for SNMP v1 and SNMP v2 access.
1.3.6.1.4.1.89.35.1.99.4.7DisplayString (SIZE(0..64))read-writemandatory
rdwrApplicationFileTable
OBJECT-TYPE
A table holding information about Application files.
1.3.6.1.4.1.89.35.1.99.5not-accessiblemandatory
rdwrApplicationFileEntry
OBJECT-TYPE
An entry in the table of Application files
1.3.6.1.4.1.89.35.1.99.5.1not-accessiblemandatory
rdwrApplicationFileName
OBJECT-TYPE
The application name.
1.3.6.1.4.1.89.35.1.99.5.1.1DisplayString (SIZE(1..128))read-onlymandatory
rdwrApplicationFileRunning
OBJECT-TYPE
Indicate whether this is the currently running application.
1.3.6.1.4.1.89.35.1.99.5.1.2TruthValueread-onlymandatory
rdwrApplicationFileSelected
OBJECT-TYPE
Indicate whether this is the currently selected application, i.e. the application which will be running after reset.
1.3.6.1.4.1.89.35.1.99.5.1.3TruthValueread-onlymandatory
rdwrApplicationFileValid
OBJECT-TYPE
Indicate whether the application is valid or not: true(1) : Application is valid - can be set to active false(2): Application is invalid - indicates a problem in the upgrade process or installation, user should download a new version.
1.3.6.1.4.1.89.35.1.99.5.1.4TruthValueread-onlymandatory
rdwrApplicationFileStartup
OBJECT-TYPE
Indicate whether the application is the startup application: true(1) : startup application false(2): not the startup application.
1.3.6.1.4.1.89.35.1.99.5.1.5TruthValueread-onlymandatory
rdwrApplicationFileVersion
OBJECT-TYPE
The major version of the application.
1.3.6.1.4.1.89.35.1.99.5.1.6DisplayString (SIZE(1..20))read-onlymandatory
rdwrApplicationFileAction
OBJECT-TYPE
Add/Select(install)/Delete an application name.
1.3.6.1.4.1.89.35.1.99.5.1.7INTEGER {none(1), add(2), select(3), delete(4)}read-writemandatory
rdwrApplicationFileStatus
OBJECT-TYPE
The SNMP Operation to be performed on a specific application file.
1.3.6.1.4.1.89.35.1.99.5.1.8RowStatusread-writemandatory
rsWSDHardwareLicense
OBJECT-TYPE
The new licence for the device
1.3.6.1.4.1.89.35.1.100DisplayString (SIZE(1..80))read-writemandatory
rsWSDHardwareLicenseID
OBJECT-TYPE
License ID used for license downgrade
1.3.6.1.4.1.89.35.1.101DisplayString (SIZE(1..80))read-onlymandatory
rdwrSnmpParameters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.102
rdwrSnmpSupportedVersions
OBJECT-TYPE
The currently supported SNMP versions as a bit mask.
1.3.6.1.4.1.89.35.1.102.1INTEGERread-onlymandatory
rdwrSnmpSupportedVersionsAfterReset
OBJECT-TYPE
The bit mask of supported SNMP versions after resetting the device.
1.3.6.1.4.1.89.35.1.102.2INTEGERread-writemandatory
rdwrSnmpPort
OBJECT-TYPE
The Snmp Port.
1.3.6.1.4.1.89.35.1.102.3INTEGERread-writemandatory
rdwrSnmpStatus
OBJECT-TYPE
Snmp Status. Enable/Disable Snmp operation.
1.3.6.1.4.1.89.35.1.102.4INTEGER {enable(1), disable(2)}read-writemandatory
rdwrSnmpConfigFileFormat
OBJECT-TYPE
The format of the configuration file.
1.3.6.1.4.1.89.35.1.102.5INTEGER {cli(1), ber(2), ascii(3)}read-writemandatory
rdwrSnmpErrorIndex
OBJECT-TYPE
The index of the field in the PDU which caused the error. Values as in the reply PDU starting with 1.
1.3.6.1.4.1.89.35.1.102.6INTEGERread-onlymandatory
rdwrSnmpErrorStatus
OBJECT-TYPE
The status returned in the Reply PDU.
1.3.6.1.4.1.89.35.1.102.7INTEGERread-onlymandatory
rdwrSnmpErrorDescription
OBJECT-TYPE
The description of the error.
1.3.6.1.4.1.89.35.1.102.8DisplayString (SIZE(0..255))read-onlymandatory
rdwrSnmpErrorRequestId
OBJECT-TYPE
The requestId of the request which caused the last error.
1.3.6.1.4.1.89.35.1.102.9INTEGERread-onlymandatory
rdwrSnmpErrorTbTable
OBJECT-TYPE
Table containing the list of errors occured
1.3.6.1.4.1.89.35.1.102.10not-accessiblemandatory
rdwrSnmpErrorTbEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.102.10.1not-accessiblemandatory
rdwrSnmpErrorTbRequestId
OBJECT-TYPE
This variable indicates the requestId of the request which caused the error.
1.3.6.1.4.1.89.35.1.102.10.1.1INTEGERread-onlymandatory
rdwrSnmpErrorTbVarId
OBJECT-TYPE
This variable indicates the variable Oid
1.3.6.1.4.1.89.35.1.102.10.1.2OBJECT IDENTIFIERread-onlymandatory
rdwrSnmpErrorTbDescription
OBJECT-TYPE
This variable indicates the description of the error
1.3.6.1.4.1.89.35.1.102.10.1.3DisplayString (SIZE(0..255))read-onlymandatory
rdwrSnmpErrorTbErrorIndex
OBJECT-TYPE
This variable indicates the index of the field in the PDU which caused the error (start at 1)
1.3.6.1.4.1.89.35.1.102.10.1.4INTEGERread-onlymandatory
rdwrSnmpErrorTbType
OBJECT-TYPE
This variable indicates the type of error.
1.3.6.1.4.1.89.35.1.102.10.1.5INTEGER {ok(0), application(1), internalRange(2), internalGeneral(3)}read-onlymandatory
rdwrSnmpErrorTbStatus
OBJECT-TYPE
This variable indicates the type of error.
1.3.6.1.4.1.89.35.1.102.10.1.6INTEGER {ok(0), tooBig(1), noSuchName(2), badValue(3), readOnly(4), genErr(5)}read-onlymandatory
rdwrSnmpErrorTbFieldInEntry
OBJECT-TYPE
This variable indicates the index of the field in an entry (0 for scalar)
1.3.6.1.4.1.89.35.1.102.10.1.7INTEGERread-onlymandatory
rdwrSnmpErrorTbTime
OBJECT-TYPE
This variable indicates the time the error occurred, the time will be in the format hh:mm:ss
1.3.6.1.4.1.89.35.1.102.10.1.8DisplayString (SIZE(9))read-onlymandatory
rdwrSnmpErrorTbDate
OBJECT-TYPE
This variable indicates the time the error occurred, the date will be in the format dd/mm/yyyy
1.3.6.1.4.1.89.35.1.102.10.1.9DisplayString (SIZE(11))read-onlymandatory
rdwrSnmpErrorTbTableReset
OBJECT-TYPE
Reset the SNMP error table
1.3.6.1.4.1.89.35.1.102.11INTEGER {reset(1)}read-writemandatory
rdwrLastConfigurationChangesTable
OBJECT-TYPE
Table containing the list of last configuration changes occured.
1.3.6.1.4.1.89.35.1.102.12not-accessiblemandatory
rdwrLastConfigurationChangesEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.102.12.1not-accessiblemandatory
rdwrLastConfigurationChangesID
OBJECT-TYPE
This variable indicates the change ID
1.3.6.1.4.1.89.35.1.102.12.1.1INTEGERread-onlymandatory
rdwrLastConfigurationChangesStatus
OBJECT-TYPE
Entry status. It is used to delete an entry
1.3.6.1.4.1.89.35.1.102.12.1.2RowStatusread-writemandatory
rdwrLastConfigurationChangesMibOid
OBJECT-TYPE
This variable indicates Mib OID.
1.3.6.1.4.1.89.35.1.102.12.1.3OBJECT IDENTIFIERread-onlymandatory
rdwrLastConfigurationChangesChangeType
OBJECT-TYPE
This variable indicates ChangeType
1.3.6.1.4.1.89.35.1.102.12.1.4INTEGER {add(1), modify(2), delete(3), configurationFileLoaded(4), tableNotUpdated(5), refreshTable(6), updatePolicies(7)}read-onlymandatory
rdwrLastConfigurationChangesKeys
OBJECT-TYPE
This variable indicates Keys.
1.3.6.1.4.1.89.35.1.102.12.1.5DisplayStringread-onlymandatory
rdwrLastConfigurationChangesTableReset
OBJECT-TYPE
Reset the Last Configuration Changes table
1.3.6.1.4.1.89.35.1.102.13INTEGER {reset(1)}read-writemandatory
rdwrLastConfigurationChangesTimestamp
OBJECT-TYPE
The value of sysUpTime at the last configuration change.
1.3.6.1.4.1.89.35.1.102.14TimeStampread-onlymandatory
rdwrLastConfigurationChangesTime
OBJECT-TYPE
Last configuration change time, time since 00:00:00 GMT, Jan. 1, 1970, measured in seconds.
1.3.6.1.4.1.89.35.1.102.15INTEGERread-onlymandatory
rsWSDSyslogSourcePort
OBJECT-TYPE
Determines the source port with which Syslog packets will be sent.
1.3.6.1.4.1.89.35.1.103INTEGER (514 | 1024..65535)read-writemandatory
rsSESSION
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.104
rsLinkAggregationHash
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.105
rsLinkAggregationL2Hash
OBJECT-TYPE
Layer 2 addresses usage in the hash function
1.3.6.1.4.1.89.35.1.105.1INTEGER {none(1), source(2), detination(3), both(4)}read-writemandatory
rsLinkAggregationL3Hash
OBJECT-TYPE
Layer 3 addresses usage in the hash function
1.3.6.1.4.1.89.35.1.105.2INTEGER {none(1), source(2), detination(3), both(4)}read-writemandatory
rsLinkAggregationL4Hash
OBJECT-TYPE
Layer 4 ports usage in the hash function
1.3.6.1.4.1.89.35.1.105.3INTEGER {none(1), source(2), detination(3), both(4)}read-writemandatory
rsScheduleTable
OBJECT-TYPE
The table of event schedules. All schedules are kept in it.
1.3.6.1.4.1.89.35.1.106not-accessiblemandatory
rsScheduleEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.106.1not-accessiblemandatory
rsScheduleName
OBJECT-TYPE
The name of the schedule. It is the primary key
1.3.6.1.4.1.89.35.1.106.1.1DisplayString (SIZE(1..30))read-writemandatory
rsScheduleFrequency
OBJECT-TYPE
The frequency of the event.
1.3.6.1.4.1.89.35.1.106.1.2INTEGER {once(1), daily(2), weekly(3)}read-writemandatory
rsScheduleTime
OBJECT-TYPE
The time will be sent in the format hhmm- 0 means field not relevant
1.3.6.1.4.1.89.35.1.106.1.3DisplayString (SIZE(4))read-writemandatory
rsScheduleDays
OBJECT-TYPE
Each octet represents status of day. 0 -not selected, 1-selected. The order is: Sunday 1000000 Monday 0100000 Tuesday 0010000 wednesday 0001000 Thursday 0000100 Friday 0000010 Saturday 0000001
1.3.6.1.4.1.89.35.1.106.1.4DisplayString (SIZE(7))read-writemandatory
rsScheduleDate
OBJECT-TYPE
The date will be sent in the format ddmmyyyy - 0 means field not relevant
1.3.6.1.4.1.89.35.1.106.1.5DisplayString (SIZE(8))read-writemandatory
rsScheduleStatus
OBJECT-TYPE
delete/update an entry
1.3.6.1.4.1.89.35.1.106.1.6RowStatusread-writemandatory
rdwrFtpParameters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.107
rdwrFtpPort
OBJECT-TYPE
The FTP Server Port.
1.3.6.1.4.1.89.35.1.107.1INTEGERread-writemandatory
rdwrFtpStatus
OBJECT-TYPE
Ftp Status. Enable/Disable Ftp Server.
1.3.6.1.4.1.89.35.1.107.2INTEGER {enable(1), disable(2)}read-writemandatory
rsFullMacCompareStatus
OBJECT-TYPE
Select whether all 48 bits of the destination MAC address are used to determine if a packet is destined to the device, or just 42 (the default)
1.3.6.1.4.1.89.35.1.108INTEGER {enforce(1), share(2)}read-writemandatory
rsREStateMonitoring
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.109
rsREACCReasonCounters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.109.1
rsACCReasonUnknownCounter
OBJECT-TYPE
ACC send packet to master with reason unknown
1.3.6.1.4.1.89.35.1.109.1.1Counterread-onlymandatory
rsACCReasonETHBroadcastCounter
OBJECT-TYPE
ACC send packet to master with reason ETH broadcast
1.3.6.1.4.1.89.35.1.109.1.2Counterread-onlymandatory
rsACCReasonProtolcolTypeCounter
OBJECT-TYPE
ACC send packet to master with reason protolcol type
1.3.6.1.4.1.89.35.1.109.1.3Counterread-onlymandatory
rsACCReasonIPVERCounter
OBJECT-TYPE
ACC send packet to master with reason IP ver
1.3.6.1.4.1.89.35.1.109.1.4Counterread-onlymandatory
rsACCReasonIPHeaderLenCounter
OBJECT-TYPE
ACC send packet to master with reason IP header lenght
1.3.6.1.4.1.89.35.1.109.1.5Counterread-onlymandatory
rsACCReasonIPFragmentedCounter
OBJECT-TYPE
ACC send packet to master with reason IP fragmented
1.3.6.1.4.1.89.35.1.109.1.6Counterread-onlymandatory
rsACCReasonTTLCounter
OBJECT-TYPE
ACC send packet to master with reason TTL 1 or 0
1.3.6.1.4.1.89.35.1.109.1.7Counterread-onlymandatory
rsACCReasonNoFlowCounter
OBJECT-TYPE
ACC send packet to master with reason no flow
1.3.6.1.4.1.89.35.1.109.1.8Counterread-onlymandatory
rsACCReasonMACCFGCounter
OBJECT-TYPE
ACC send packet to master with reason MAC cfg
1.3.6.1.4.1.89.35.1.109.1.9Counterread-onlymandatory
rsACCReasonSYNcookieOKCounter
OBJECT-TYPE
ACC send packet to master with reason SYN cookie OK
1.3.6.1.4.1.89.35.1.109.1.10Counterread-onlymandatory
rsACCReasonSYNcookieInvalidCounter
OBJECT-TYPE
ACC send packet to master with reason SYN cookie invalid
1.3.6.1.4.1.89.35.1.109.1.11Counterread-onlymandatory
rsACCReasonInconsistentPktLenCounter
OBJECT-TYPE
ACC send packet to master with reason inconsistent packet lenght
1.3.6.1.4.1.89.35.1.109.1.12Counterread-onlymandatory
rsACCReasonNoReasonCounter
OBJECT-TYPE
ACC send packet to master with reason no reason
1.3.6.1.4.1.89.35.1.109.1.13Counterread-onlymandatory
rsACCReasonFTPportCounter
OBJECT-TYPE
ACC send packet to master with reason FTP port in packet
1.3.6.1.4.1.89.35.1.109.1.14Counterread-onlymandatory
rsACCReasonFTP227Counter
OBJECT-TYPE
ACC send packet to master with reason FTP 227 in packet
1.3.6.1.4.1.89.35.1.109.1.15Counterread-onlymandatory
rsACCReasonIPLenghtCounter
OBJECT-TYPE
ACC send packet to master with reason IP lenght > 40, this means a packet with data
1.3.6.1.4.1.89.35.1.109.1.16Counterread-onlymandatory
rsACCReasonFINorRSTCounter
OBJECT-TYPE
ACC send packet to master with reason FIN or RST, the session has ended
1.3.6.1.4.1.89.35.1.109.1.17Counterread-onlymandatory
rsACCReasonClassifyCounter
OBJECT-TYPE
ACC send packet to master with reason classify
1.3.6.1.4.1.89.35.1.109.1.18Counterread-onlymandatory
rsACCReasonVlanReplyCounter
OBJECT-TYPE
ACC send packet to master with reason VLAN Reply
1.3.6.1.4.1.89.35.1.109.1.19Counterread-onlymandatory
rsACCReasonDBindNewSYNCounter
OBJECT-TYPE
ACC send packet to master with reason new SYN on delayed binding
1.3.6.1.4.1.89.35.1.109.1.20Counterread-onlymandatory
rsACCReasonAllToMasterCounter
OBJECT-TYPE
ACC send packet to master with reason all traffic
1.3.6.1.4.1.89.35.1.109.1.21Counterread-onlymandatory
rsREStateCounters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.109.2
rsREStateRXReplyCounter
OBJECT-TYPE
RE is state rx reply
1.3.6.1.4.1.89.35.1.109.2.1Counterread-onlymandatory
rsREStateRXRequestCounter
OBJECT-TYPE
RE is state rx request
1.3.6.1.4.1.89.35.1.109.2.2Counterread-onlymandatory
rsREStateIPDAinFFTCounter
OBJECT-TYPE
Packet IPDA in FFT
1.3.6.1.4.1.89.35.1.109.2.3Counterread-onlymandatory
rsREStateIPDAnotFFTCounter
OBJECT-TYPE
Packet IPDA not FFT
1.3.6.1.4.1.89.35.1.109.2.4Counterread-onlymandatory
rsREStateBridgeCounter
OBJECT-TYPE
Performing bridging
1.3.6.1.4.1.89.35.1.109.2.5Counterread-onlymandatory
rsREStateResetCounter
OBJECT-TYPE
Reset the ACC counters
1.3.6.1.4.1.89.35.1.109.3INTEGER {reset(1)}read-writemandatory
rdwrTerminalParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.110
rdwrTerminalAliasTable
OBJECT-TYPE
A table containing the alias strings of a specific user.
1.3.6.1.4.1.89.35.1.110.1not-accessiblemandatory
rdwrTerminalAliasEntry
OBJECT-TYPE
Information about a particular Alias entry.
1.3.6.1.4.1.89.35.1.110.1.1not-accessiblemandatory
rdwrTerminalAliasName
OBJECT-TYPE
Alias string.
1.3.6.1.4.1.89.35.1.110.1.1.1DisplayString (SIZE(0..80))read-writemandatory
rdwrTerminalUserName
OBJECT-TYPE
User name string.
1.3.6.1.4.1.89.35.1.110.1.1.2DisplayString (SIZE(0..80))read-writemandatory
rdwrTerminalAliasCommand
OBJECT-TYPE
command string.
1.3.6.1.4.1.89.35.1.110.1.1.3DisplayString (SIZE(0..80))read-writemandatory
rdwrTerminalAliasStatus
OBJECT-TYPE
Entry status
1.3.6.1.4.1.89.35.1.110.1.1.4RowStatusread-writemandatory
rdwrTerminalPrompt
OBJECT-TYPE
The system prompt of the device.
1.3.6.1.4.1.89.35.1.110.2DisplayString (SIZE(0..32))read-writemandatory
rdwrMasterInterfaceGroupingPortsTable
OBJECT-TYPE
The table contains all the physical ports. Each port can be set to included/excluded from the master interface grouping.
1.3.6.1.4.1.89.35.1.111not-accessiblemandatory
rdwrMasterInterfaceGroupingPortsEntry
OBJECT-TYPE
Row definition for the table.
1.3.6.1.4.1.89.35.1.111.1not-accessiblemandatory
rdwrMasterInterfaceGroupingPortNumber
OBJECT-TYPE
Physical port number.
1.3.6.1.4.1.89.35.1.111.1.1INTEGERread-onlymandatory
rdwrMasterInterfaceGroupingPortState
OBJECT-TYPE
included- the port effects the master interface grouping. excluded- the port does not effects the master interface grouping.
1.3.6.1.4.1.89.35.1.111.1.2INTEGER {included(1), excluded(2)}read-writemandatory
rdwr5SecAvgResourceUtilization
OBJECT-TYPE
Average 5 seconds Resource Utilization of internal CPU utilization
1.3.6.1.4.1.89.35.1.112INTEGER (0..100)read-onlymandatory
rdwr60SecAvgResourceUtilization
OBJECT-TYPE
Average 60 seconds Resource Utilization of internal CPU utilization
1.3.6.1.4.1.89.35.1.113INTEGER (0..100)read-onlymandatory
rdwrArpWithInterfaceGroup
OBJECT-TYPE
indicates if the device should send arp request (broadcast) when redundancy enable (interface grouping enable) and the (main) device is down (interface/s go down)
1.3.6.1.4.1.89.35.1.114INTEGER {send(1), avoid(2)}read-writemandatory
rdwrDBind
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.115
rdwrDP
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.116
rsDOS
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.117
rsSTATEFUL
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.118
rsAPM
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.119
rdwrIpsec
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.120
rdwrIpsecIke
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.120.1
rdwrIkeTable
OBJECT-TYPE
A table holding information about ike connections
1.3.6.1.4.1.89.35.1.120.1.1not-accessiblemandatory
rdwrIkeEntry
OBJECT-TYPE
An entry in the ike table
1.3.6.1.4.1.89.35.1.120.1.1.1not-accessiblemandatory
rdwrIkeName
OBJECT-TYPE
The name of this entry in the ike table.
1.3.6.1.4.1.89.35.1.120.1.1.1.1DisplayString (SIZE(1..128))read-onlymandatory
rdwrIkePhase1EncryptionAlg
OBJECT-TYPE
The encryption algorithm used in phase1 negotiation
1.3.6.1.4.1.89.35.1.120.1.1.1.2INTEGER {des(1), idea(2), blowfish(3), rc5(4), des3(5), cast(6), aes(7)}read-writemandatory
rdwrIkePhase1HashAlg
OBJECT-TYPE
The hash algorithm used in phase1 negotiation
1.3.6.1.4.1.89.35.1.120.1.1.1.3INTEGER {md5(1), sha(2)}read-writemandatory
rdwrIkePhase1DhKeyGroup
OBJECT-TYPE
The Diffie Hellman Group used in phase1 negotiations
1.3.6.1.4.1.89.35.1.120.1.1.1.4INTEGER {modp768(1), modp1024(2), ec2n155(3), ec2n185(4), modp1536(5)}read-writemandatory
rdwrIkePhase1LifeTime
OBJECT-TYPE
The lifetime in seconds
1.3.6.1.4.1.89.35.1.120.1.1.1.5INTEGERread-writemandatory
rdwrIkePhase1Psk
OBJECT-TYPE
The Pre Shared Key
1.3.6.1.4.1.89.35.1.120.1.1.1.6DisplayString (SIZE(0..128))read-writemandatory
rdwrIkePhase2Protocol
OBJECT-TYPE
The Encapsulation protocol
1.3.6.1.4.1.89.35.1.120.1.1.1.7INTEGER {ah(2), esp(3)}read-writemandatory
rdwrIkePhase2EncryptionAlg
OBJECT-TYPE
The encryption algorithm to be used in phase2 negotiation
1.3.6.1.4.1.89.35.1.120.1.1.1.8INTEGER {des(1), idea(2), blowfish(3), rc5(4), des3(5), cast(6), aes(7)}read-writemandatory
rdwrIkePhase2HashAlg
OBJECT-TYPE
The hash algorithm to be used in phase2 negotiation
1.3.6.1.4.1.89.35.1.120.1.1.1.9INTEGER {md5(1), sha(2), null(3)}read-writemandatory
rdwrIkePfsKeyGroup
OBJECT-TYPE
The Diffie Hellman Group to be used in phase2 negotiations
1.3.6.1.4.1.89.35.1.120.1.1.1.10INTEGER {modp768(1), modp1024(2), ec2n155(3), ec2n185(4), modp1536(5), off(65535)}read-writemandatory
rdwrIkeSaLifeTime
OBJECT-TYPE
The lifetime in seconds
1.3.6.1.4.1.89.35.1.120.1.1.1.11INTEGERread-writemandatory
rdwrIkeIpCompression
OBJECT-TYPE
Indicate whether to use ip compression.
1.3.6.1.4.1.89.35.1.120.1.1.1.12INTEGER {enabled(1), disabled(2)}read-writemandatory
rdwrIkeManualKeyMode
OBJECT-TYPE
indicate the ipSec key mode: IKE (automatic) or manual
1.3.6.1.4.1.89.35.1.120.1.1.1.13INTEGER {ike(1), manual(2)}read-writemandatory
rdwrIkeEncrypKey
OBJECT-TYPE
the encryption key in case of manual mode
1.3.6.1.4.1.89.35.1.120.1.1.1.14DisplayString (SIZE(0..48))read-writemandatory
rdwrIkeAuthntKey
OBJECT-TYPE
the authentication key in case of manual mode
1.3.6.1.4.1.89.35.1.120.1.1.1.15DisplayString (SIZE(0..40))read-writemandatory
rdwrIkeInSpi
OBJECT-TYPE
the inbound SPI value for manual key mode
1.3.6.1.4.1.89.35.1.120.1.1.1.16INTEGERread-writemandatory
rdwrIkeOutSpi
OBJECT-TYPE
the outbound SPI value for manual key mode
1.3.6.1.4.1.89.35.1.120.1.1.1.17INTEGERread-writemandatory
rdwrIkeDPDCheckInterval
OBJECT-TYPE
interval for the keep alive checks
1.3.6.1.4.1.89.35.1.120.1.1.1.18INTEGERread-writemandatory
rdwrIkeStatus
OBJECT-TYPE
Operation to be performed on a specific ike table entry.
1.3.6.1.4.1.89.35.1.120.1.1.1.19RowStatusread-writemandatory
rdwrDedicatedManagementPort
OBJECT-TYPE
A dedicated port for management - 0 is Not Assigned
1.3.6.1.4.1.89.35.1.121INTEGERread-writemandatory
rsGeneric
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.122
rdwrClientsTableStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.123
rdwrClientsTableNumEntries
OBJECT-TYPE
Number of entries in the clients table.
1.3.6.1.4.1.89.35.1.123.1INTEGERread-onlymandatory
rdwrClientsTableNumEntries5SecAvg
OBJECT-TYPE
Average number of entries in the clients table in the last 5 seconds.
1.3.6.1.4.1.89.35.1.123.2INTEGERread-onlymandatory
rdwrClientsTableNumEntries60SecAvg
OBJECT-TYPE
Average number of entries in the clients table in the last 60 seconds.
1.3.6.1.4.1.89.35.1.123.3INTEGERread-onlymandatory
rsWSDSyslogDestinationPort
OBJECT-TYPE
Determines the destination port with which Syslog packets will be sent.
1.3.6.1.4.1.89.35.1.124INTEGER (514 | 1024..65535)read-writemandatory
rdwrPortsTagTable
OBJECT-TYPE
The table contains all the physical ports. Each entry can force port tag for incoming and outgoing traffic.
1.3.6.1.4.1.89.35.1.125not-accessiblemandatory
rdwrPortsTagEntry
OBJECT-TYPE
Row definition for the table.
1.3.6.1.4.1.89.35.1.125.1not-accessiblemandatory
rdwrPortsTagPortNumber
OBJECT-TYPE
Physical port number.
1.3.6.1.4.1.89.35.1.125.1.1INTEGERread-onlymandatory
rdwrPortsTagPortInTag
OBJECT-TYPE
The incoming physical port vlan Tag value that represent this port.
1.3.6.1.4.1.89.35.1.125.1.2INTEGERread-writemandatory
rdwrPortsTagPortOutTag
OBJECT-TYPE
The outgoing physical port vlan Tag value that represent this port.
1.3.6.1.4.1.89.35.1.125.1.3INTEGERread-writemandatory
rsPhysPortMirrorThresholdUnits
OBJECT-TYPE
Units used to measure port-mirroring threshold.
1.3.6.1.4.1.89.35.1.126INTEGER {pps(1), kbps(2)}read-writemandatory
rsPhysPortMirrorThresholdInterval
OBJECT-TYPE
Time interval in which port mirroring will be active, if the mode is threshold
1.3.6.1.4.1.89.35.1.127INTEGERread-writemandatory
rsPhysPortMirrorThresholdReset
OBJECT-TYPE
Reset the port mirroring threshold
1.3.6.1.4.1.89.35.1.128INTEGER {reset(1), no-reset(2)}read-writemandatory
rdwrDayLightSaving
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.129
rdwrDayLightSavingBegins
OBJECT-TYPE
The day light saving beginning, this can be either a specific date - format D|DD/Mon/HH, or a recurring date - format R|x/Day/Mon/HH
1.3.6.1.4.1.89.35.1.129.1DisplayString (SIZE(0..255))read-writemandatory
rdwrDayLightSavingEnds
OBJECT-TYPE
The day light saving ending, this can be either a specific date - format D|DD/Mon/HH, or a recurring date - format R|x/Day/Mon/HH
1.3.6.1.4.1.89.35.1.129.2DisplayString (SIZE(0..255))read-writemandatory
rdwrDayLightSavingTimeDesignations
OBJECT-TYPE
The day light saving actual designation.
1.3.6.1.4.1.89.35.1.129.3INTEGER {standardTime(1), summerTime(2)}read-onlymandatory
rdwrDayLightSavingAdminStatus
OBJECT-TYPE
The day light saving administrator status.
1.3.6.1.4.1.89.35.1.129.4INTEGER {enabled(1), disabled(2)}read-writemandatory
rdwrDayLightSavingBeginDate
OBJECT-TYPE
Returns the date of the beginning of the daylight saving
1.3.6.1.4.1.89.35.1.129.5DisplayString (SIZE(0..255))read-onlymandatory
rdwrDayLightSavingEndDate
OBJECT-TYPE
Returns the date of the end of the daylight saving
1.3.6.1.4.1.89.35.1.129.6DisplayString (SIZE(0..255))read-onlymandatory
rdwrDayLightSavingDelta
OBJECT-TYPE
Indicates the daylight savings delta. When the daylight savings starts the hour will be moved back delta hours. When it is started it will be moved forward delta hours. The default is one hour.
1.3.6.1.4.1.89.35.1.129.7INTEGERread-writemandatory
rdwrCommonClientTable
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.130
rdwrClientsViewTable
OBJECT-TYPE
A table holding information for defining client table views (filtering)
1.3.6.1.4.1.89.35.1.130.1not-accessiblemandatory
rdwrClientsViewEntry
OBJECT-TYPE
An entry in the client views table
1.3.6.1.4.1.89.35.1.130.1.1not-accessiblemandatory
rdwrClientsViewIndex
OBJECT-TYPE
The index of this entry in the views table.
1.3.6.1.4.1.89.35.1.130.1.1.1INTEGERread-onlymandatory
rdwrClientsViewSrcAddrFrom
OBJECT-TYPE
The IP Address of the low boundary of the source interval.
1.3.6.1.4.1.89.35.1.130.1.1.2IpAddressread-writemandatory
rdwrClientsViewSrcAddrTo
OBJECT-TYPE
The IP Address of the high boundary of the source interval.
1.3.6.1.4.1.89.35.1.130.1.1.3IpAddressread-writemandatory
rdwrClientsViewDstAddrFrom
OBJECT-TYPE
The IP Address of the low boundary of the requested interval.
1.3.6.1.4.1.89.35.1.130.1.1.4IpAddressread-writemandatory
rdwrClientsViewDstAddrTo
OBJECT-TYPE
The IP Address of the high boundary of the requested interval.
1.3.6.1.4.1.89.35.1.130.1.1.5IpAddressread-writemandatory
rdwrClientsViewSrcPortFrom
OBJECT-TYPE
The TCP/UDP port of the low boundary of the source interval.
1.3.6.1.4.1.89.35.1.130.1.1.6INTEGER (0..65535)read-writemandatory
rdwrClientsViewSrcPortTo
OBJECT-TYPE
The TCP/UDP port of the high boundary of the source interval.
1.3.6.1.4.1.89.35.1.130.1.1.7INTEGER (0..65535)read-writemandatory
rdwrClientsViewDstPortFrom
OBJECT-TYPE
The TCP/UDP port of the low boundary of the requested interval.
1.3.6.1.4.1.89.35.1.130.1.1.8INTEGER (0..65535)read-writemandatory
rdwrClientsViewDstPortTo
OBJECT-TYPE
The TCP/UDP port of the high boundary of the requested interval.
1.3.6.1.4.1.89.35.1.130.1.1.9INTEGER (0..65535)read-writemandatory
rdwrClientsViewFarmAddr
OBJECT-TYPE
The client IP Address of the farm.
1.3.6.1.4.1.89.35.1.130.1.1.10IpAddressread-writemandatory
rdwrClientsViewServerAddr
OBJECT-TYPE
The client IP Address of the server.
1.3.6.1.4.1.89.35.1.130.1.1.11IpAddressread-writemandatory
rdwrClientsViewClientType
OBJECT-TYPE
The client type
1.3.6.1.4.1.89.35.1.130.1.1.12DisplayString (SIZE(0..20))read-writemandatory
rdwrClientsViewAdminStatus
OBJECT-TYPE
Administrative status of the view entry enabled - activates the view. disabled - inactive the view.
1.3.6.1.4.1.89.35.1.130.1.1.13INTEGER {enabled(1), disabled(2)}read-writemandatory
rdwrClientsViewStatus
OBJECT-TYPE
It is used to create and delete a filter
1.3.6.1.4.1.89.35.1.130.1.1.14RowStatusread-writemandatory
rdwrClientsViewAction
OBJECT-TYPE
The type of action to be performed on entries matching this filter.
1.3.6.1.4.1.89.35.1.130.1.1.15INTEGER {noAction(1), deleteMatching(2), countMatching(3)}read-writemandatory
rdwrClientsViewActionFeedback
OBJECT-TYPE
Message containing feedback for the action taken.
1.3.6.1.4.1.89.35.1.130.1.1.16DisplayString (SIZE(0..240))read-onlymandatory
rdwrClientsViewVlanTag
OBJECT-TYPE
802.1q VLAN tag associated with the client entry. 0 - no tag.
1.3.6.1.4.1.89.35.1.130.1.1.17INTEGER (0..4095)read-writemandatory
rdwrClientsViewFarmName
OBJECT-TYPE
The client's farm name.
1.3.6.1.4.1.89.35.1.130.1.1.18DisplayString (SIZE(0..50))read-writemandatory
rdwrClientsTable
OBJECT-TYPE
A table holding the device filtered client table
1.3.6.1.4.1.89.35.1.130.2not-accessiblemandatory
rdwrClientsEntry
OBJECT-TYPE
An entry in the client table
1.3.6.1.4.1.89.35.1.130.2.1not-accessiblemandatory
rdwrClientsIndex
OBJECT-TYPE
The index of this entry in the table.
1.3.6.1.4.1.89.35.1.130.2.1.1INTEGERread-onlymandatory
rdwrClientsSourceAddr
OBJECT-TYPE
The client source address.
1.3.6.1.4.1.89.35.1.130.2.1.2IpAddressread-writemandatory
rdwrClientsSourcePort
OBJECT-TYPE
The clinet source port.
1.3.6.1.4.1.89.35.1.130.2.1.3INTEGERread-writemandatory
rdwrClientsRequestedAddr
OBJECT-TYPE
The client requested address.
1.3.6.1.4.1.89.35.1.130.2.1.4IpAddressread-writemandatory
rdwrClientsRequestedPort
OBJECT-TYPE
The client requested TCP/UDP Port.
1.3.6.1.4.1.89.35.1.130.2.1.5INTEGERread-writemandatory
rdwrClientsFarmAddr
OBJECT-TYPE
IP Address of the farm the client trough which the client connected.
1.3.6.1.4.1.89.35.1.130.2.1.6IpAddressread-onlymandatory
rdwrClientsServerAddr
OBJECT-TYPE
IP Address of server currently serving this client.
1.3.6.1.4.1.89.35.1.130.2.1.7IpAddressread-onlymandatory
rdwrClientsServerPort
OBJECT-TYPE
TCP/UDP Port of server currently serving this client.
1.3.6.1.4.1.89.35.1.130.2.1.8INTEGERread-onlymandatory
rdwrClientsAttachedTime
OBJECT-TYPE
Indicates when the client was attached. Measured in seconds since device re-initialization.
1.3.6.1.4.1.89.35.1.130.2.1.9INTEGERread-onlymandatory
rdwrClientsNATaddr
OBJECT-TYPE
NAT IP Address of the client.
1.3.6.1.4.1.89.35.1.130.2.1.10IpAddressread-onlymandatory
rdwrClientsNATPort
OBJECT-TYPE
NAT TCP/UDP port of the client.
1.3.6.1.4.1.89.35.1.130.2.1.11INTEGERread-onlymandatory
rdwrClientsTimeToLive
OBJECT-TYPE
This variable measures the client time to live in seconds.
1.3.6.1.4.1.89.35.1.130.2.1.12INTEGERread-onlymandatory
rdwrClientsClientType
OBJECT-TYPE
This variable indicates the administrative type of this entry.
1.3.6.1.4.1.89.35.1.130.2.1.13DisplayString (SIZE(1..20))read-onlymandatory
rdwrClientsClientMode
OBJECT-TYPE
This variable indicates how a single client's sessions are handled in the client table.
1.3.6.1.4.1.89.35.1.130.2.1.14DisplayString (SIZE(1..20))read-onlymandatory
rdwrClientsUserData1
OBJECT-TYPE
This variable holds miscellaneous client information.
1.3.6.1.4.1.89.35.1.130.2.1.15DisplayString (SIZE(0..240))read-onlymandatory
rdwrClientsUserData2
OBJECT-TYPE
This variable holds miscellaneous client information.
1.3.6.1.4.1.89.35.1.130.2.1.16DisplayString (SIZE(0..240))read-onlymandatory
rdwrClientsStatus
OBJECT-TYPE
It is used to delete an entry
1.3.6.1.4.1.89.35.1.130.2.1.17RowStatusread-writemandatory
rdwrClientsTypeTable
OBJECT-TYPE
A table holding the client types
1.3.6.1.4.1.89.35.1.130.3not-accessiblemandatory
rdwrClientsTypeEntry
OBJECT-TYPE
An entry in the client types table
1.3.6.1.4.1.89.35.1.130.3.1not-accessiblemandatory
rdwrClientsType
OBJECT-TYPE
The clinet type of this entry.
1.3.6.1.4.1.89.35.1.130.3.1.1DisplayString (SIZE(1..20))read-onlymandatory
rdwrVersionIdentifierTable
OBJECT-TYPE
Row holding version verification information.
1.3.6.1.4.1.89.35.1.131not-accessiblemandatory
rdwrVersionIdentifierEntry
OBJECT-TYPE
Row definition for the table.
1.3.6.1.4.1.89.35.1.131.1not-accessiblemandatory
rdwrVersionIdentifierIdx
OBJECT-TYPE
Installed version index. Calculated by version major * 100 + version minor
1.3.6.1.4.1.89.35.1.131.1.1INTEGERread-onlymandatory
rdwrVersionIdentifierBase
OBJECT-TYPE
Installed version base number.
1.3.6.1.4.1.89.35.1.131.1.2INTEGERread-writemandatory
rdwrVersionIdentifierVal
OBJECT-TYPE
Installed version identifier string.
1.3.6.1.4.1.89.35.1.131.1.3DisplayString (SIZE(0..40))read-writemandatory
rdwrVrrp
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.132
rdwrVrrpAdmin
OBJECT-TYPE
Control all VRIDs admin status.
1.3.6.1.4.1.89.35.1.132.1INTEGER {allDown(1), allUp(2), noChange(3)}read-writemandatory
rdwrVrrpOperAdvertisementInterval
OBJECT-TYPE
The time interval, in milliseconds, between sending advertisement messages for all VRIDs. Only the master router sends VRRP advertisements.
1.3.6.1.4.1.89.35.1.132.2INTEGERread-writemandatory
rdwrVrrpAssoIpV6AddrTable
OBJECT-TYPE
This MIB describes proparitery radware support for managing Virtual Router Redundancy Protocol (VRRP). Most of the support is given via the VRRP mib
1.3.6.1.4.1.89.35.1.132.3not-accessiblemandatory
rdwrVrrpAssoIpV6AddrEntry
OBJECT-TYPE
An entry in the table contains an IPv6 address that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'vrrpOperIpV6AddrCount'). Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the `vrrpOperState' has transitioned to `initialize'.
1.3.6.1.4.1.89.35.1.132.3.1not-accessiblemandatory
rdwrVrrpAssoIpV6IfIndex
OBJECT-TYPE
1.3.6.1.4.1.89.35.1.132.3.1.1INTEGERread-onlymandatory
rdwrVrrpAssoIpV6VrId
OBJECT-TYPE
This object contains the Virtual Router Identifier (VRID).
1.3.6.1.4.1.89.35.1.132.3.1.2VrIdread-onlymandatory
rdwrVrrpAssoIpV6Addr
OBJECT-TYPE
The assigned IPv6 addresses that a virtual router is responsible for backing up.
1.3.6.1.4.1.89.35.1.132.3.1.3Ipv6Addressread-onlymandatory
rdwrVrrpAssoIpV6AddrRowStatus
OBJECT-TYPE
The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated address for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated address from the virtual router. The use of other values is implementation-dependent.
1.3.6.1.4.1.89.35.1.132.3.1.4RowStatusread-writemandatory
rdwrVrrpPriorityTracking
OBJECT-TYPE
VRRP priority tracking weight for interface link status, zero is disabled
1.3.6.1.4.1.89.35.1.132.4INTEGERread-writemandatory
rdwrWSDCommon
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.134
rdwrCdbParameters
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.139
rdwrCdbTimeStamp
OBJECT-TYPE
The time stamp taken when the the CDB was last changed. Defined as the number of seconds since 1/1/1970.
1.3.6.1.4.1.89.35.1.139.1INTEGERread-writemandatory
rdwrMirroring
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.140
rdwrMirroringActiveThreshold
OBJECT-TYPE
The maximum amount of entries to be sent from the active device.
1.3.6.1.4.1.89.35.1.140.1INTEGERread-writemandatory
rdwrMirroringActiveSleep
OBJECT-TYPE
After sending the maximum amount of entries the active device will sleep for the predefined period (in milliseconds).
1.3.6.1.4.1.89.35.1.140.2INTEGERread-writemandatory
rdwrMirroringActiveBackupThreshold
OBJECT-TYPE
The maximum amount of entries to be sent from the active device to the backup (after the backup device is up).
1.3.6.1.4.1.89.35.1.140.3INTEGERread-writemandatory
rdwrMirroringActiveBackupSleep
OBJECT-TYPE
After sending the maximum amount of entries the active device will sleep for the predefined period (in milliseconds).
1.3.6.1.4.1.89.35.1.140.4INTEGERread-writemandatory
rdwrMirroringActiveBackupHoldtime
OBJECT-TYPE
The active device will start to notify the main of all existing entries after the configured time (in milliseconds).
1.3.6.1.4.1.89.35.1.140.5INTEGERread-writemandatory
rdwrMirroringActiveBackupUpdate
OBJECT-TYPE
Enable/Disable the update of the backup device from the active
1.3.6.1.4.1.89.35.1.140.6INTEGER {enable(1), disable(2)}read-writemandatory
rsWSDThroughputLicense
OBJECT-TYPE
The new licence for the device
1.3.6.1.4.1.89.35.1.141DisplayString (SIZE(1..80))read-writemandatory
rsWSDThroughputLicenseID
OBJECT-TYPE
License ID used for license downgrade
1.3.6.1.4.1.89.35.1.142DisplayString (SIZE(1..80))read-onlymandatory
rsSSLCertificate
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.148
rsSSLCertificateDefaultValues
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.148.1
rsSSLCertificateDefaultCommon
OBJECT-TYPE
default value for common field for certificate requests.
1.3.6.1.4.1.89.35.1.148.1.1DisplayString (SIZE(1..64))read-writemandatory
rsSSLCertificateDefaultLocality
OBJECT-TYPE
default value for locality field for certificate requests.
1.3.6.1.4.1.89.35.1.148.1.2DisplayString (SIZE(0..128))read-writemandatory
rsSSLCertificateDefaultStateOrProvince
OBJECT-TYPE
default value for state or province field for certificate requests.
1.3.6.1.4.1.89.35.1.148.1.3DisplayString (SIZE(0..128))read-writemandatory
rsSSLCertificateDefaultOrganization
OBJECT-TYPE
default value for organization field for certificate requests.
1.3.6.1.4.1.89.35.1.148.1.4DisplayString (SIZE(0..64))read-writemandatory
rsSSLCertificateDefaultOrganizationUnit
OBJECT-TYPE
default value for organization unit field for certificate requests.
1.3.6.1.4.1.89.35.1.148.1.5DisplayString (SIZE(0..64))read-writemandatory
rsSSLCertificateDefaultCountryName
OBJECT-TYPE
default value for country name field for certificate requests.
1.3.6.1.4.1.89.35.1.148.1.6DisplayString (SIZE(0..2))read-writemandatory
rsSSLCertificateDefaultEMail
OBJECT-TYPE
default value for e-mail field for certificate requests.
1.3.6.1.4.1.89.35.1.148.1.7DisplayString (SIZE(0..128))read-writemandatory
rsSSLCertificateTable
OBJECT-TYPE
The table for certificate handling
1.3.6.1.4.1.89.35.1.148.2not-accessiblemandatory
rsSSLCertificateEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.1.148.2.1not-accessiblemandatory
rsSSLCertificateName
OBJECT-TYPE
The name of the certificate entry
1.3.6.1.4.1.89.35.1.148.2.1.1DisplayString (SIZE(1..50))read-onlymandatory
rsSSLCertificateEntryType
OBJECT-TYPE
entry type
1.3.6.1.4.1.89.35.1.148.2.1.2INTEGER {key(1), certificateSigningRequest(2), certificate(3), certificateChain(4), clientCAcertificate(5), rootTSLcertificate(6), sshPublicKey(7)}read-writemandatory
rsSSLCertificateKeySize
OBJECT-TYPE
key data size in bits
1.3.6.1.4.1.89.35.1.148.2.1.3INTEGER {na(0), size512(512), size1024(1024), size2048(2048)}read-writemandatory
rsSSLCertificateKeyPassphrase
OBJECT-TYPE
password phrase to scramble key
1.3.6.1.4.1.89.35.1.148.2.1.4DisplayString (SIZE(0..64))read-writemandatory
rsSSLCertificateCommon
OBJECT-TYPE
value for common name field for certificate requests.
1.3.6.1.4.1.89.35.1.148.2.1.5DisplayString (SIZE(0..64))read-writemandatory
rsSSLCertificateLocality
OBJECT-TYPE
value for locality field for certificate requests.
1.3.6.1.4.1.89.35.1.148.2.1.6DisplayString (SIZE(0..128))read-writemandatory
rsSSLCertificateStateOrProvince
OBJECT-TYPE
value for state or province field for certificate requests.
1.3.6.1.4.1.89.35.1.148.2.1.7DisplayString (SIZE(0..128))read-writemandatory
rsSSLCertificateOrganization
OBJECT-TYPE
value for organization field for certificate requests.
1.3.6.1.4.1.89.35.1.148.2.1.8DisplayString (SIZE(0..64))read-writemandatory
rsSSLCertificateOrganizationUnit
OBJECT-TYPE
value for organization unit field for certificate requests.
1.3.6.1.4.1.89.35.1.148.2.1.9DisplayString (SIZE(0..64))read-writemandatory
rsSSLCertificateCountryName
OBJECT-TYPE
value for country name field for certificate requests.
1.3.6.1.4.1.89.35.1.148.2.1.10DisplayString (SIZE(0..2))read-writemandatory
rsSSLCertificateEMail
OBJECT-TYPE
value for e-mail field for certificate requests.
1.3.6.1.4.1.89.35.1.148.2.1.11DisplayString (SIZE(0..128))read-writemandatory
rsSSLCertificateExpiry
OBJECT-TYPE
expiry date according to certificate
1.3.6.1.4.1.89.35.1.148.2.1.12DisplayStringread-onlymandatory
rsSSLCertificateOCSPUrl
OBJECT-TYPE
OCSP url for client CA status validation
1.3.6.1.4.1.89.35.1.148.2.1.13DisplayStringread-writemandatory
rsSSLCertificateStatus
OBJECT-TYPE
row status for certificate entry
1.3.6.1.4.1.89.35.1.148.2.1.14RowStatusread-writemandatory
rsSSLCertificateRequestedValidityPeriod
OBJECT-TYPE
validity period in days requested for self signed certificate
1.3.6.1.4.1.89.35.1.148.2.1.15INTEGERread-writemandatory
rsSSLCertificateImportExport
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.148.3
rsSSLCertificateImportExportEntryName
OBJECT-TYPE
entry name to be addressed.
1.3.6.1.4.1.89.35.1.148.3.1DisplayString (SIZE(0..50))read-writemandatory
rsSSLCertificateImportExportFileName
OBJECT-TYPE
file name path to export to or import from according to action.
1.3.6.1.4.1.89.35.1.148.3.2DisplayStringread-writemandatory
rsSSLCertificateImportExportPassphrase
OBJECT-TYPE
Passphrase to be used when importing a key.
1.3.6.1.4.1.89.35.1.148.3.3DisplayString (SIZE(0..64))read-writemandatory
rsSSLCertificateImportExportAction
OBJECT-TYPE
Action to be performed on the entry name or file specified.
1.3.6.1.4.1.89.35.1.148.3.4INTEGER {importKey(1), exportKey(2), importCertificate(3), exportCertificate(4), exportSigningRequest(5), importCertChain(6), exportCertChain(7), importCertClientCA(8), exportCertClientCA(9)}read-writemandatory
rdwrTemperatureCPU1Get
OBJECT-TYPE
get the temperature of CPU1
1.3.6.1.4.1.89.35.1.150INTEGERread-onlymandatory
rdwrTemperatureCPU2Get
OBJECT-TYPE
get the temperature of CPU2
1.3.6.1.4.1.89.35.1.151INTEGERread-onlymandatory
rdwrTemperatureWarningThresholdGet
OBJECT-TYPE
get the temperature warning threshold
1.3.6.1.4.1.89.35.1.152INTEGERread-onlymandatory
rdwrTemperatureShutdownThresholdGet
OBJECT-TYPE
get the temperature shutdown threshold
1.3.6.1.4.1.89.35.1.153INTEGERread-onlymandatory
rdwrTemperatureThresholdStatusCPU1Get
OBJECT-TYPE
get the threshold status of CPU1 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded
1.3.6.1.4.1.89.35.1.154INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
rdwrTemperatureThresholdStatusCPU2Get
OBJECT-TYPE
get the threshold status of CPU2 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded
1.3.6.1.4.1.89.35.1.155INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
rndNumberOfHD
OBJECT-TYPE
The number of hard drives.
1.3.6.1.4.1.89.35.1.156INTEGERread-onlymandatory
rndSSLCardName
OBJECT-TYPE
The name of the SSL card.
1.3.6.1.4.1.89.35.1.157DisplayString (SIZE(0..255))read-onlymandatory
rndCompCardName
OBJECT-TYPE
The name of the compression card.
1.3.6.1.4.1.89.35.1.158DisplayString (SIZE(0..255))read-onlymandatory
rdwrHardDisk
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.159
rdwrHardDiskLogging
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.160
rdwrConfigurationSync
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.161
rsSystemFansTable
OBJECT-TYPE
A table containing the fans status.
1.3.6.1.4.1.89.35.1.162not-accessiblemandatory
rsSystemFansEntry
OBJECT-TYPE
Information about a particular fan.
1.3.6.1.4.1.89.35.1.162.1not-accessiblemandatory
rsSystemFanIndex
OBJECT-TYPE
Fan Index.
1.3.6.1.4.1.89.35.1.162.1.1INTEGERread-onlymandatory
rsSystemFansStatus
OBJECT-TYPE
Fan Status.
1.3.6.1.4.1.89.35.1.162.1.2DisplayStringread-onlymandatory
rdwrDualPsuStatus
OBJECT-TYPE
This variable represent the current status of the power supplies 0 - Single PowerSupply OK 1 - First PowerSupply Failed 2 - Second PowerSupply Failed 3 - Double PowerSupply OK 4 - Unknown PowerSupply Failed
1.3.6.1.4.1.89.35.1.163INTEGER {singlePwrSupplyOk(0), firstPwrSupplyFailed(1), secondPwrSupplyFailed(2), doublePwrSupplyOk(3), unknownPwrSupplyFailed(4)}read-onlymandatory
rsNetPortUtilizationTable
OBJECT-TYPE
Display the port Utilization.
1.3.6.1.4.1.89.35.1.164not-accessiblemandatory
rsNetPortUtilizationEntry
OBJECT-TYPE
An entry containing a single port utilization.
1.3.6.1.4.1.89.35.1.164.1not-accessiblemandatory
rsNetPortUtilizationIndex
OBJECT-TYPE
The ports index.
1.3.6.1.4.1.89.35.1.164.1.1INTEGERread-onlymandatory
rsNetPortUtilizationEntryInUtil
OBJECT-TYPE
The inbound utilization in-packets/speed.
1.3.6.1.4.1.89.35.1.164.1.2INTEGERread-onlymandatory
rsNetPortUtilizationEntryOutUtil
OBJECT-TYPE
The outbound utilization out-packets/speed.
1.3.6.1.4.1.89.35.1.164.1.3INTEGERread-onlymandatory
rsHWCPUTemperatureTable
OBJECT-TYPE
Display the CPU temperature.
1.3.6.1.4.1.89.35.1.165not-accessiblemandatory
rsHWCPUTemperatureEntry
OBJECT-TYPE
An entry containing a single CPU temperature.
1.3.6.1.4.1.89.35.1.165.1not-accessiblemandatory
rsHWCPUTemperatureIndex
OBJECT-TYPE
The CPU index.
1.3.6.1.4.1.89.35.1.165.1.1INTEGERread-onlymandatory
rsHWCPUTemperatureValue
OBJECT-TYPE
The CPU temperature.
1.3.6.1.4.1.89.35.1.165.1.2INTEGERread-onlymandatory
rdwrTotalIncomingTrafficPeak
OBJECT-TYPE
This variable represent the maximum incoming traffic in Mbps
1.3.6.1.4.1.89.35.1.166INTEGERread-onlymandatory
rsHWCoreUtilizationTable
OBJECT-TYPE
Display the device core utilization.
1.3.6.1.4.1.89.35.1.167not-accessiblemandatory
rsHWCoreUtilizationEntry
OBJECT-TYPE
An entry containing a single core utilization.
1.3.6.1.4.1.89.35.1.167.1not-accessiblemandatory
rsHWCoreUtilizationIndex
OBJECT-TYPE
The core index.
1.3.6.1.4.1.89.35.1.167.1.1INTEGERread-onlymandatory
rsHWCoreUtilizationValue
OBJECT-TYPE
The core utilization.
1.3.6.1.4.1.89.35.1.167.1.2INTEGERread-onlymandatory
rsManagePro
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.170
rsUserLockoutInterval
OBJECT-TYPE
Lockout time interval for user account (min). Zero means no lockout.
1.3.6.1.4.1.89.35.1.171INTEGERread-writemandatory
rdwrManagmentPortsStatus
OBJECT-TYPE
Is management port enabled on the device
1.3.6.1.4.1.89.35.1.172FeatureStatusread-writemandatory
rdwrSyslogServerTable
OBJECT-TYPE
A table of syslog servers.
1.3.6.1.4.1.89.35.1.173not-accessiblemandatory
rdwrSyslogServerEntry
OBJECT-TYPE
An entry of the syslog servers table
1.3.6.1.4.1.89.35.1.173.1not-accessiblemandatory
rdwrSyslogServerAddress
OBJECT-TYPE
IP address of the syslog server.
1.3.6.1.4.1.89.35.1.173.1.1DisplayStringread-writemandatory
rdwrSyslogServerStatus
OBJECT-TYPE
Server operational status.
1.3.6.1.4.1.89.35.1.173.1.2FeatureStatusread-writemandatory
rdwrSyslogServerSrcPort
OBJECT-TYPE
Server source port.
1.3.6.1.4.1.89.35.1.173.1.3INTEGERread-writemandatory
rdwrSyslogServerDstPort
OBJECT-TYPE
Server destination port.
1.3.6.1.4.1.89.35.1.173.1.4INTEGERread-writemandatory
rdwrSyslogServerFacility
OBJECT-TYPE
The SYSLOG Priority value is calculated by multiplying the Facility number by 8 and then adding the numerical value of the Severity.
1.3.6.1.4.1.89.35.1.173.1.5INTEGER {kernelMsg(0), userLevelMsg(1), mailSystem(2), systemDaemons(3), authorization(4), syslogdMessages(5), linePrinter(6), networkNews(7), uucp(8), clockDaemon1(9), security(10), ftpDaemon(11), ntpSubsystem(12), logAudit(13), logAlert(14), clockDaemon2(15), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)}read-writemandatory
rdwrSyslogServerProtocol
OBJECT-TYPE
The SYSLOG Protocol.
1.3.6.1.4.1.89.35.1.173.1.6INTEGER {udpProtocol(1), tcpProtocol(2), tlsProtocol(3)}read-writemandatory
rdwrSyslogCACertificate
OBJECT-TYPE
CA Certificate of the syslog server.
1.3.6.1.4.1.89.35.1.173.1.7DisplayStringread-writemandatory
rdwrSyslogServerRowStatus
OBJECT-TYPE
IP address of the syslog server.
1.3.6.1.4.1.89.35.1.173.1.8RowStatusread-writemandatory
rdwrSyslogServerConnectionStatus
OBJECT-TYPE
The SYSLOG Protocol.
1.3.6.1.4.1.89.35.1.173.1.9INTEGER {nr(1), reachable(2), unreachable(3)}read-writemandatory
rdwrSyslogServerNumberOfLogsInBackLog
OBJECT-TYPE
Number of logs in the backlog.
1.3.6.1.4.1.89.35.1.173.1.10INTEGERread-writemandatory
rdwrSyslogSecuritySending
OBJECT-TYPE
Security events sending status.
1.3.6.1.4.1.89.35.1.173.1.11FeatureStatusread-writemandatory
rdwrSyslogHealthSending
OBJECT-TYPE
Health events sending status.
1.3.6.1.4.1.89.35.1.173.1.12FeatureStatusread-writemandatory
rdwrSyslogUserAuditSending
OBJECT-TYPE
Audit events sending status.
1.3.6.1.4.1.89.35.1.173.1.13FeatureStatusread-writemandatory
rsWSDSyslogGlobalStatus
OBJECT-TYPE
Enable/Disable syslog message sending to remote station.
1.3.6.1.4.1.89.35.1.174INTEGER {enable(1), disable(2)}read-writemandatory
rsSendPortUnreachableStatus
OBJECT-TYPE
enable - send port unreachable (UDP) or reset (TCP) when port not available. disable - don't send a response, just discard the received packet.
1.3.6.1.4.1.89.35.1.175INTEGER {enable(1), disable(2)}read-writemandatory
rsTacacsServer
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.1.180
rsTacacsPrimaryServerAddr
OBJECT-TYPE
Defines the primary TACACS+ server address.
1.3.6.1.4.1.89.35.1.180.1IpAddressread-writemandatory
rsTacacsPrimaryServerSecret
OBJECT-TYPE
Defines the shared secret between the switch and the primary TACACS+ server.
1.3.6.1.4.1.89.35.1.180.2DisplayString (SIZE(0..100))read-writemandatory
rsTacacsPrimaryServerPort
OBJECT-TYPE
The port on which the TACACS+ primary server listens.
1.3.6.1.4.1.89.35.1.180.3INTEGER (1..65000)read-writemandatory
rsTacacsSecondaryServerAddr
OBJECT-TYPE
Defines the secondary TACACS+ server address.
1.3.6.1.4.1.89.35.1.180.4IpAddressread-writemandatory
rsTacacsSecondaryServerSecret
OBJECT-TYPE
Defines the shared secret between the switch and the secondary TACACS+ server.
1.3.6.1.4.1.89.35.1.180.5DisplayString (SIZE(0..100))read-writemandatory
rsTacacsSecondaryServerPort
OBJECT-TYPE
The port on which the TACACS+ secondary server listens.
1.3.6.1.4.1.89.35.1.180.6INTEGER (1..65000)read-writemandatory
rsTacacsServerRetries
OBJECT-TYPE
Defines the number of failed authentication requests before switching to a different TACACS+ server. The default is 3 requests.
1.3.6.1.4.1.89.35.1.180.7INTEGER (1..10)read-writemandatory
rsTacacsServerTimeout
OBJECT-TYPE
Defines the amount of time, in seconds, before a TACACS+ server authentication attempt is considered to have failed. The default is 4 seconds.
1.3.6.1.4.1.89.35.1.180.8INTEGER (1..255)read-writemandatory
rsTacacsCommandLoggingStatus
OBJECT-TYPE
Enable/disable TACACS+ command logging. When enabled, device sends command log messages to TACACS+ server.
1.3.6.1.4.1.89.35.1.180.9FeatureStatusread-writemandatory
rsTacacsCommandAuthorizationStatus
OBJECT-TYPE
Enable/disable TACACS+ command authorization.
1.3.6.1.4.1.89.35.1.180.10FeatureStatusread-writemandatory
rsTacacsClientAging
OBJECT-TYPE
Number of seconds for which tacacs+ authentication and authorization replies are cached. During this time the device will use the cached response and not issue requests for the user.
1.3.6.1.4.1.89.35.1.180.11INTEGERread-writemandatory
rsWSDResourceUtilizationInstance1
OBJECT-TYPE
Resource Utilization of WSD on instance 1. Considers network utilization and internal CPU utilization
1.3.6.1.4.1.89.35.1.181INTEGER (0..100)read-onlymandatory
rsWSDREResourceUtilizationInstance1
OBJECT-TYPE
Resource Utilization of network utilization on instance 1
1.3.6.1.4.1.89.35.1.182INTEGER (0..100)read-onlymandatory
rsWSDRSResourceUtilizationInstance1
OBJECT-TYPE
Resource Utilization of internal CPU utilization on instance 1
1.3.6.1.4.1.89.35.1.183INTEGER (0..100)read-onlymandatory
rdwr5SecAvgResourceUtilizationInstance1
OBJECT-TYPE
Average 5 seconds Resource Utilization of internal CPU utilization on instance 1
1.3.6.1.4.1.89.35.1.184INTEGER (0..100)read-onlymandatory
rdwr60SecAvgResourceUtilizationInstance1
OBJECT-TYPE
Average 60 seconds Resource Utilization of internal CPU utilization on instance 1
1.3.6.1.4.1.89.35.1.185INTEGER (0..100)read-onlymandatory
rndMidLevelManagement
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.2
rndAlarmOptions
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.2.2
rndAlarmEnabling
OBJECT-TYPE
Indicates whether alarms should be issued to the high-level NMS
1.3.6.1.4.1.89.35.2.2.1INTEGER {enabled(1), disabled(2)}read-writemandatory
rndAlarmInterval
OBJECT-TYPE
Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
1.3.6.1.4.1.89.35.2.2.2INTEGERread-writemandatory
rndMonitoredElementsTable
OBJECT-TYPE
The table of monitored elements of the network
1.3.6.1.4.1.89.35.2.3not-accessiblemandatory
rndMonitoredElementEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.2.3.1not-accessiblemandatory
rndMonitoredElementAddress
OBJECT-TYPE
The IP address of the monitored element
1.3.6.1.4.1.89.35.2.3.1.1IpAddressread-onlymandatory
rndMonitoredElementCommunity
OBJECT-TYPE
The community of the monitored element
1.3.6.1.4.1.89.35.2.3.1.2DisplayString (SIZE(1..20))read-writemandatory
rndMonitoredElementLabel
OBJECT-TYPE
The label assigned by the network manager to the monitored element
1.3.6.1.4.1.89.35.2.3.1.3DisplayString (SIZE(1..20))read-writemandatory
rndDefaultPollingInterval
OBJECT-TYPE
The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
1.3.6.1.4.1.89.35.2.3.1.4INTEGERread-writemandatory
rndDefaultLogFile
OBJECT-TYPE
The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
1.3.6.1.4.1.89.35.2.3.1.5DisplayStringread-writemandatory
rndMonitoredElementStatus
OBJECT-TYPE
It is used to manage the monitored elements table and indicates the current monitoring status of an element.
1.3.6.1.4.1.89.35.2.3.1.6RowStatusread-writemandatory
rndMonitoringTable
OBJECT-TYPE
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
1.3.6.1.4.1.89.35.2.4not-accessiblemandatory
rndMonitoringEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.2.4.1not-accessiblemandatory
rndMonitoredElement
OBJECT-TYPE
A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
1.3.6.1.4.1.89.35.2.4.1.1DisplayString (SIZE(1..20))read-onlymandatory
rndMonitoredObjectInstanceLabel
OBJECT-TYPE
The label assigned by the network manager to the monitored object instance
1.3.6.1.4.1.89.35.2.4.1.2DisplayString (SIZE(1..20))read-onlymandatory
rndMonitoredObjectName
OBJECT-TYPE
The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the <MIB module name> : <object type name> format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
1.3.6.1.4.1.89.35.2.4.1.3DisplayString (SIZE(0..20))read-writemandatory
rndMonitoredObjectIdentifier
OBJECT-TYPE
The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
1.3.6.1.4.1.89.35.2.4.1.4OBJECT IDENTIFIERread-writemandatory
rndMonitoredObjectInstance
OBJECT-TYPE
The instance identifier (key) of the monitored object instance.
1.3.6.1.4.1.89.35.2.4.1.5OBJECT IDENTIFIERread-writemandatory
rndMonitoredObjectSyntax
OBJECT-TYPE
The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value
1.3.6.1.4.1.89.35.2.4.1.6INTEGER {integer(1), octet-string(2), ip-address(3), object-identifier(4)}read-writemandatory
rndMonitoringInterval
OBJECT-TYPE
The period of time between two consecutive retrievals of the monitored object instance's value.
1.3.6.1.4.1.89.35.2.4.1.7INTEGERread-writemandatory
rndAlarmMaxTreshold
OBJECT-TYPE
The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
1.3.6.1.4.1.89.35.2.4.1.8INTEGERread-writemandatory
rndAlarmMinTreshold
OBJECT-TYPE
If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
1.3.6.1.4.1.89.35.2.4.1.9INTEGERread-writemandatory
rndMonitoringLogfile
OBJECT-TYPE
The entire path of the file in which the results of the monitoring of this object instance should be recorded.
1.3.6.1.4.1.89.35.2.4.1.10DisplayStringread-writemandatory
rndMonitoringEntryStatus
OBJECT-TYPE
It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
1.3.6.1.4.1.89.35.2.4.1.11RowStatusread-writemandatory
rndMibFilesTable
OBJECT-TYPE
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
1.3.6.1.4.1.89.35.2.5not-accessiblemandatory
rndMibFileEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.35.2.5.1not-accessiblemandatory
rndMibFileIndex
OBJECT-TYPE
The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
1.3.6.1.4.1.89.35.2.5.1.1INTEGERread-onlymandatory
rndMibFilePath
OBJECT-TYPE
The path of the MIB file in the MIB file server.
1.3.6.1.4.1.89.35.2.5.1.2DisplayStringread-writemandatory
rndMibFileRefresh
OBJECT-TYPE
Indicates if the file should be fetched after setting this entry from the MIB file server.
1.3.6.1.4.1.89.35.2.5.1.3INTEGER {no(1), yes(2)}read-writemandatory
rndMibFileEntryStatus
OBJECT-TYPE
It is used to manage the MIB files table.
1.3.6.1.4.1.89.35.2.5.1.4RowStatusread-writemandatory
rndHardwareConfiguration
OBJECT-TYPE
Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
1.3.6.1.4.1.89.35.2.6TruthValueread-writemandatory
rndEraseSimulatedConfiguration
OBJECT-TYPE
eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration.
1.3.6.1.4.1.89.35.2.7INTEGER {eraseSimulatedConfiguration(1), simulatedConfigurationPresent(2), simulatedConfigurationErased(3)}read-writemandatory
rndDeleteValuesTable
OBJECT-TYPE
This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
1.3.6.1.4.1.89.35.2.8not-accessiblemandatory
rndDeleteValuesEntry
OBJECT-TYPE
The row definition for the rndDeleteValuesTable table.
1.3.6.1.4.1.89.35.2.8.1not-accessiblemandatory
rndRowStatusVariableName
OBJECT-TYPE
The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
1.3.6.1.4.1.89.35.2.8.1.1DisplayString (SIZE(1..80))read-writemandatory
rndRowStatusObjectId
OBJECT-TYPE
The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
1.3.6.1.4.1.89.35.2.8.1.2OBJECT IDENTIFIERread-writemandatory
rndRowDeleteValue
OBJECT-TYPE
The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
1.3.6.1.4.1.89.35.2.8.1.3INTEGERread-writemandatory
rndDeleteValueEntryStatus
OBJECT-TYPE
It is used to delete an entry from this table.
1.3.6.1.4.1.89.35.2.8.1.4RowStatusread-writemandatory
rndVisionDriver
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.2.9
rndVisionDriverActiveName
OBJECT-TYPE
The name of the active vision driver stored on the device.
1.3.6.1.4.1.89.35.2.9.1DisplayString (SIZE(1..100))read-onlymandatory
rndVisionDriverRestoreFromBackup
OBJECT-TYPE
Restores the backup vision driver
1.3.6.1.4.1.89.35.2.9.2INTEGER {activate(1)}read-writemandatory
rndSmartFan
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.2.10
rndSmartFanStatus
OBJECT-TYPE
Smart Fan Status
1.3.6.1.4.1.89.35.2.10.1INTEGER {enable(1), disable(2)}read-writemandatory
rsIpZeroHopRouting
OBJECT-IDENTITY
1.3.6.1.4.1.89.35.3
rsIpZhrGeneralStatus
OBJECT-TYPE
This parameter enables or disables the IP Zero Hop Routing feature for all IP interfaces. The IP Zero Hop Routing feature can also be enabled or disabled on each IP interface through the rsIpZhrStatusTable.
1.3.6.1.4.1.89.35.3.1INTEGER {enable(1), disable(2)}read-writemandatory
rsIpZhrAgingTimeout
OBJECT-TYPE
This parameter controls the aging time-out in seconds of direct connections which were allocated. The virtual IP address of a direct connection whose time-out has expired is eligible for allocation to a different connection.
1.3.6.1.4.1.89.35.3.2INTEGERread-writemandatory
rsIpZhrStatusTable
OBJECT-TYPE
The administrative status of the ZHR feature per ip interface.
1.3.6.1.4.1.89.35.3.3not-accessiblemandatory
rsIpZhrStatusEntry
OBJECT-TYPE
An entry in the ZHR status table.
1.3.6.1.4.1.89.35.3.3.1not-accessiblemandatory
rsIpZhrStatusIpIntf
OBJECT-TYPE
The Ip interface whose ZHR feature status is accessed.
1.3.6.1.4.1.89.35.3.3.1.1IpAddressread-onlymandatory
rsIpZhrAdminStatus
OBJECT-TYPE
It is used to control whether ZHR will operate on the interface.
1.3.6.1.4.1.89.35.3.3.1.2INTEGER {enable(1), disable(2)}read-writemandatory
rsIpZhrVirtAddressTable
OBJECT-TYPE
The table of free virtual IP addresses which may be allocated to establish direct connections - Per IP Interface.
1.3.6.1.4.1.89.35.3.4not-accessiblemandatory
rsIpZhrVirtAddressEntry
OBJECT-TYPE
An entry in the ZHR virtual IP addresses table
1.3.6.1.4.1.89.35.3.4.1not-accessiblemandatory
rsIpZhrVirtAddressIpIntf
OBJECT-TYPE
The Ip Interface to which the IP addresses in this entry are allocated.
1.3.6.1.4.1.89.35.3.4.1.1IpAddressread-onlymandatory
rsIpZhrVirtAddressTo
OBJECT-TYPE
The last free IP address in the block.
1.3.6.1.4.1.89.35.3.4.1.2IpAddressread-onlymandatory
rsIpZhrVirtAddressFrom
OBJECT-TYPE
The first free IP address in the block.
1.3.6.1.4.1.89.35.3.4.1.3IpAddressread-writemandatory
rsIpZhrVirtAddressStatus
OBJECT-TYPE
It is used to manage the virtual address table. The supported actions will be active, createAndGo and destroy.
1.3.6.1.4.1.89.35.3.4.1.4RowStatusread-writemandatory
rsIpZhrConnectionsTable
OBJECT-TYPE
Table of the currently active direct connections.
1.3.6.1.4.1.89.35.3.5not-accessiblemandatory
rsIpZhrConnectionEntry
OBJECT-TYPE
An entry in the ZHR Connection table
1.3.6.1.4.1.89.35.3.5.1not-accessiblemandatory
rsIpZhrConnectionIpIntf
OBJECT-TYPE
The IP Interface for which this direct connection was established.
1.3.6.1.4.1.89.35.3.5.1.1IpAddressread-onlymandatory
rsIpZhrConnectionSrcIp
OBJECT-TYPE
The source IP Address of this direct connection.
1.3.6.1.4.1.89.35.3.5.1.2IpAddressread-onlymandatory
rsIpZhrConnectionDestIp
OBJECT-TYPE
The destination IP Address of this direct connection.
1.3.6.1.4.1.89.35.3.5.1.3IpAddressread-onlymandatory
rsIpZhrConnectionVirtualIp
OBJECT-TYPE
The virtual IP address allocated for this direct connection.
1.3.6.1.4.1.89.35.3.5.1.4IpAddressread-onlymandatory
rsIpZhrConnectionType
OBJECT-TYPE
The type of this direct connection. dynamic - established by the RS. disabled - established by the RS. The RS detected that the virtual address is already used as destination by the source BEFORE its allocation, and therefore marked this connection as 'disabled' to prevent a future allocation of this virtual address to this source. static - established by user.
1.3.6.1.4.1.89.35.3.5.1.5INTEGER {static(1), dynamic(2), disabled(3)}read-onlymandatory
rsIpZhrConnectionAge
OBJECT-TYPE
The age of the connection in seconds.
1.3.6.1.4.1.89.35.3.5.1.6INTEGERread-onlymandatory
rsIpZhrConnectionStatus
OBJECT-TYPE
It is used to manage the connections table. The supported actions will be active, createAndGo and destroy.
1.3.6.1.4.1.89.35.3.5.1.7RowStatusread-writemandatory

Notifications

NameOIDStatus
routeTableOverflow
NOTIFICATION-TYPE
An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP).
1.3.6.1.4.1.89.0.5
fanNotWorking
NOTIFICATION-TYPE
Fan Failure was detected
1.3.6.1.4.1.89.0.7
resetRequired
NOTIFICATION-TYPE
This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing algorithm is changed between SPF and Spanning Tree. The reset can be performed manually or using the variable rndAction.
1.3.6.1.4.1.89.0.10
endTftp
NOTIFICATION-TYPE
This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
1.3.6.1.4.1.89.0.12
abortTftp
NOTIFICATION-TYPE
This trap indicates that in the device aborted a TFTP session with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
1.3.6.1.4.1.89.0.13
startTftp
NOTIFICATION-TYPE
Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question
1.3.6.1.4.1.89.0.14
deviceTemperatureNormal
NOTIFICATION-TYPE
Sent whenever the temperature changes back to normal
1.3.6.1.4.1.89.0.15
deviceTemperatureHigh
NOTIFICATION-TYPE
Sent whenever the temperature changes to high
1.3.6.1.4.1.89.0.16
deviceTemperatureCritical
NOTIFICATION-TYPE
Sent whenever the temperature changes to critical
1.3.6.1.4.1.89.0.17
rsARPTableIpConflict
NOTIFICATION-TYPE
Indecate IP Conflicts on ARP table.
1.3.6.1.4.1.89.0.21
ipxRipTblOverflow
NOTIFICATION-TYPE
This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
1.3.6.1.4.1.89.0.36
ipxSapTblOverflow
NOTIFICATION-TYPE
This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
1.3.6.1.4.1.89.0.37
facsAccessVoilation
NOTIFICATION-TYPE
This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface.The bound variable rndErrorDesc, rndErrorSeverity(== info ) and interface Number.
1.3.6.1.4.1.89.0.49
autoConfigurationCompleted
NOTIFICATION-TYPE
This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info )
1.3.6.1.4.1.89.0.50
forwardingTabOverflow
NOTIFICATION-TYPE
This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
1.3.6.1.4.1.89.0.51
errorsDuringInit
NOTIFICATION-TYPE
1.3.6.1.4.1.89.0.61
vlanDynPortAdded
NOTIFICATION-TYPE
1.3.6.1.4.1.89.0.66
vlanDynPortRemoved
NOTIFICATION-TYPE
1.3.6.1.4.1.89.0.67
rsSDclientsTableOverflow
NOTIFICATION-TYPE
This warning is generated when an overflow occurs in the clients table.
1.3.6.1.4.1.89.0.68
rsSDinactiveServer
NOTIFICATION-TYPE
This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive.
1.3.6.1.4.1.89.0.69
rsIpZhrConnectionsTableOverflow
NOTIFICATION-TYPE
The Zero Hop Routing connections Table has been overflown.
1.3.6.1.4.1.89.0.70
rsIpZhrReqStaticConnNotAccepted
NOTIFICATION-TYPE
The requested static connection was not accepted because there is no available IP virtual address to allocate to it.
1.3.6.1.4.1.89.0.71
rsIpZhrVirtualIpAsSource
NOTIFICATION-TYPE
The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections.
1.3.6.1.4.1.89.0.72
rsIpZhrNotAllocVirtualIp
NOTIFICATION-TYPE
The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this specific source IP.
1.3.6.1.4.1.89.0.73
rsSnmpSetRequestInSpecialCfgState
NOTIFICATION-TYPE
An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during sending the current configuration to an NMS.
1.3.6.1.4.1.89.0.74
rsConfigurationAuditEvent
NOTIFICATION-TYPE
Triggered by an audit event.
1.3.6.1.4.1.89.0.75
rdwrFanNotWorking
NOTIFICATION-TYPE
Triggered by fan failure.
1.3.6.1.4.1.89.0.76
rdwrFanInfo
NOTIFICATION-TYPE
Triggered by fan information.
1.3.6.1.4.1.89.0.77
rdwrCertExpiration
NOTIFICATION-TYPE
Certificate expiration notification.
1.3.6.1.4.1.89.0.78
cdeResyncronizing
NOTIFICATION-TYPE
Config Sync primary device Resyncronize with secondary device.
1.3.6.1.4.1.89.0.79
cdeCannotSync
NOTIFICATION-TYPE
Config Sync Cannot sync.
1.3.6.1.4.1.89.0.80
cdeConnected
NOTIFICATION-TYPE
Config Sync primary device Connected to secondary device
1.3.6.1.4.1.89.0.81
cdeConfigUpdateFailed
NOTIFICATION-TYPE
Config Sync primary device Failed to update the secondary device with a specific change.
1.3.6.1.4.1.89.0.82
cdeSlaveReboot
NOTIFICATION-TYPE
Config Sync primary device Send reboot command to the secondary device
1.3.6.1.4.1.89.0.83
cdeSlaveRebootFailed
NOTIFICATION-TYPE
Config Sync Secondary Device Reboot has failed.
1.3.6.1.4.1.89.0.84
cdeEnterOutOfSync
NOTIFICATION-TYPE
Config Sync enters out-of-sync state.
1.3.6.1.4.1.89.0.85
cdeSlaveRebootPending
NOTIFICATION-TYPE
Config Sync Secondary Device Reboot is pending.
1.3.6.1.4.1.89.0.86
cdeDisconnected
NOTIFICATION-TYPE
Config Sync enters disconnected state.
1.3.6.1.4.1.89.0.87
cdeInSync
NOTIFICATION-TYPE
Config Sync enters in-sync state.
1.3.6.1.4.1.89.0.88
cdeIncompatible
NOTIFICATION-TYPE
Config Sync enters incompatible state.
1.3.6.1.4.1.89.0.89
cdeNoMaster
NOTIFICATION-TYPE
Config Sync enters no-master state.
1.3.6.1.4.1.89.0.90
cdeMasterConnected
NOTIFICATION-TYPE
Config Sync enters master-connected state.
1.3.6.1.4.1.89.0.91
rsWSDRedundancySwitch
NOTIFICATION-TYPE
Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued.
1.3.6.1.4.1.89.0.141
rsStpPortStateTrap
NOTIFICATION-TYPE
This trap is sent to inform the user of silent link failure or physical port state change, initiated by STP.
1.3.6.1.4.1.89.30.0.1
rsWSDConnectionLimitReached
NOTIFICATION-TYPE
This warning is generated when the users connection limit of an application or a physical server is reached.
1.3.6.1.4.1.89.35.1.0.1
rsWSDReadyForShutDown
NOTIFICATION-TYPE
This warning is generated when all the clients sessions of an application or a physical server are finished and so, the application or server are ready to be shut down.
1.3.6.1.4.1.89.35.1.0.2
rsWSDIllegalReport
NOTIFICATION-TYPE
This warning is generated when an LRP message arrives with illegal information.
1.3.6.1.4.1.89.35.1.0.3
rsWSDRemoteWSDUnavailable
NOTIFICATION-TYPE
This warning is generated when a remote WSD is in full capacity, not in service or disabled. This server is then unavailable
1.3.6.1.4.1.89.35.1.0.4
rsWSDCapacityLimitReached
NOTIFICATION-TYPE
This warning is generated when WSD capacity limit is reached.
1.3.6.1.4.1.89.35.1.0.5
rsWSDStatusMonitoring
NOTIFICATION-TYPE
This warning is generated for unavailable SNMP parameter from a server.
1.3.6.1.4.1.89.35.1.0.6
rsWSDWrongPassword
NOTIFICATION-TYPE
This warning is generated when authentication failed because of wrong user name or password.
1.3.6.1.4.1.89.35.1.0.7
rsWSDInternalTableOverflow
NOTIFICATION-TYPE
This warning is generated when there are no more free entries in the table.
1.3.6.1.4.1.89.35.1.0.8
rsWSDServerUp
NOTIFICATION-TYPE
This informational trap is sent when a server correctly responds to a connectivity check for the first time.
1.3.6.1.4.1.89.35.1.0.9
rsWSDPoliciesUpdated
NOTIFICATION-TYPE
This informational trap is sent when the rule policies are updated.
1.3.6.1.4.1.89.35.1.0.10
rsWSDIntrusionDetected
NOTIFICATION-TYPE
This informational trap is sent when an intrusion is detected.
1.3.6.1.4.1.89.35.1.0.11
rsWSDUserLocked
NOTIFICATION-TYPE
This warning trap is sent when a user is locked from managing the device because of login failure.
1.3.6.1.4.1.89.35.1.0.12
rsWSDAuthenticationSuccess
NOTIFICATION-TYPE
This informational trap is sent when a user authentication succeeded.
1.3.6.1.4.1.89.35.1.0.13
rsRadwareNTPUpdateProblem
NOTIFICATION-TYPE
This warning trap is sent when the device NTP client encounters problem updating the system clock.
1.3.6.1.4.1.89.35.1.0.14
rsRadwareVrrpErrors
NOTIFICATION-TYPE
This warning trap is generated when VRRP error occurs.
1.3.6.1.4.1.89.35.1.0.15
rdwrDualPowerSupplyProblem
NOTIFICATION-TYPE
This warning trap is sent when a power supply becomes inacive on a dual power supply device.
1.3.6.1.4.1.89.35.1.0.16
rdwrDualPowerSupplyUp
NOTIFICATION-TYPE
This info trap is sent when a power supply changes state from inactive to active on a dual power supply device.
1.3.6.1.4.1.89.35.1.0.17
rdwrMngmntPortDisabled
NOTIFICATION-TYPE
This info trap is sent when a user tries to access a management port via a protocol, which is disabled on this port.
1.3.6.1.4.1.89.35.1.0.18
rdwrUnauthorizedSourceIP
NOTIFICATION-TYPE
This info trap is sent when a user tries to access a management port from an IP address, that is not authorized to perform access.
1.3.6.1.4.1.89.35.1.0.19
rsSSLCertificateSyncProblem
NOTIFICATION-TYPE
This trap is issued when a file is removed from certificate directory causing a synchronization problem with certificate table.
1.3.6.1.4.1.89.35.1.0.20
rsWSDAuthenticationServerSuccess
NOTIFICATION-TYPE
This informational trap is sent after a successful connection to authentication server such as RADIUS/TACACS+.
1.3.6.1.4.1.89.35.1.0.22
rsWSDAuthenticationServerFail
NOTIFICATION-TYPE
This informational trap is sent after a connection to authentication server such as RADIUS/TACACS+ has failed.
1.3.6.1.4.1.89.35.1.0.23