TIMETRA-VRTR-MIB

TEXTUAL-CONVENTION

DSCP Application identifiers for protocols that generate control traffic on the the Nokia SROS router.

TEXTUAL-CONVENTION

IEEE 802.1p priority (Dot1p) Application identifiers for Layer-2 protocols that generate control traffic on the the Nokia SROS router.

TEXTUAL-CONVENTION

The value of TmnxEmbFlowspecFltrMaxSize specifies the maximum number of entries reserved for an auto-created IP or IPv6 embedded filter for flowspec rules on a given virtual router.

TEXTUAL-CONVENTION

The TmnxInetAddrState is the state of an ipv6 address.

TEXTUAL-CONVENTION

The TmnxInetAddrTypeWithMcast represents a type of Internet address. It extends the standard InetAddressType with the values of 'ipv4Mcast (128)' and 'ipv6Mcast (129)' that indicate IPv4/IPv6 addresses used for multicast extensions.

TEXTUAL-CONVENTION

The TmnxInetCidrNextHopOwner is the owner of the next hop for a route. unknown : Next hop owner is unknown. rsvp : Next hop owner is RSVP. ldp : Next hop owner is LDP. ldpOverRsvp : Next hop owner is LDP over RSVP. bgp : Next hop owner is BGP. srOspf : Next hop owner is SR-OSPF. srIsis : Next hop owner is SR-ISIS. srTe : Next hop owner is SR-TE. udp : Next hop owner is UDP. srBgp : Next hop owner is BGP-SR TE. mplsFwdPolicy : Next hop owner is MPLS-Fwd-Policy. srPolicy : Next hop owner is SR-POLICY. ribApi : Next hop owner is RIB-API.

TEXTUAL-CONVENTION

The TmnxInetCidrNextHopType is the type of next hop for a route. regular : Next hop is an IPv4 destination address for an IPv4 prefix or and IPv6 destination address for and IPv6 prefix. tunneled : Next hop refers to a IPv4 LDP/RSVP/GRE tunnel. sixOverMPLS : Next hop is a MPLS tunnel for IPv6 prefix. sixOverFour : Next hop is a IPv4 destination for IPv6 prefix. tunneledIpv6: Next hop refers to a IPv6 LDP tunnel.

TEXTUAL-CONVENTION

The TmnxL3RouteOwner is the owner of the next hop for a Layer 3 route.

TEXTUAL-CONVENTION

The value of TmnxRouteOperFlags specifies the different properties on the route.

TEXTUAL-CONVENTION

The TmnxSendCgaModifier textual convention represents a 16-octets string used as modifier while generating Cryptographically Generated Addresses (CGA).

TEXTUAL-CONVENTION

The purpose of a VPN-ID is to identify a VPN. The global VPN Identifier format is: 3-octet VPN Authority, organizationally unique ID followed by a 4-octet VPN index identifying the VPN according to OUI.

TEXTUAL-CONVENTION

The textual convention TmnxVrtrNeid represents the Network Element Identifier.

TEXTUAL-CONVENTION

The TmnxVrtrSingleSfmOverloadState data type is an enumerated integer that describes the values used to identify the IGP single-SFM-overload state (SFM:Switch-Fabric/Control Processor Module). notApplicable : the IGP overload reaction to the single-SFM condition is disabled; normal : the full system multicast capacity of a dual-SFM chassis is available; overload : only reduced system multicast capacity is available, and IGP protocols are in overload.

TEXTUAL-CONVENTION

The value of VRtrTTLPropagateType specifies whether or not to enable the propagation of time to live (TTL) from the header of IP packet into all labels in the stack. When the value is set to 'none' the IP TTL propagation is disabled from the IP header to all labels in the stack. When the value is set to 'all' the IP TTL is propagated from the header of IP packet into all labels in the stack.

TEXTUAL-CONVENTION

The value of VRtrVprnTTLPropagateType specifies whether or not to enable the propagation of time to live (TTL) at Ingress LER from the header of IP packet into all labels in the stack. When the value is set to 'none' the IP TTL propagation is disabled from the IP header to all labels in the stack including the VC label. When the value is set to 'all' the IP TTL is propagated from the header of IP packet into all labels in the stack. When the value is set to 'vcOnly' the IP TTL is propagated from the IP header into the VC label but not the transport labels in the stack. When the value is set to 'inherit', the VPRN instance inherits the base router instance configuration.

TEXTUAL-CONVENTION

The value of VrtrMplsTunnelMode specifies MPLS tunnel mode.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

The vRtrConfTable has an entry for each virtual router configured in the system.

OBJECT-TYPE

Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the TIMETRA-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted.

OBJECT-TYPE

The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router.

OBJECT-TYPE

The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus.

OBJECT-TYPE

The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1.

OBJECT-TYPE

The administrative name for this virtual router. The router name must be unique among all virtual routers in the system. For row creation to succeed a value must be specified for vRtrName. When a row is created in the vRtrConfTable for a service vprn (i.e. when vRtrType is set to 'vprn'), the agent automatically assigns the name 'vprn<service-id>'.

OBJECT-TYPE

The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit.

OBJECT-TYPE

The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state.

OBJECT-TYPE

The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'.

OBJECT-TYPE

The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.

OBJECT-TYPE

The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state.

OBJECT-TYPE

The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'.

OBJECT-TYPE

The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to one (1), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used.

OBJECT-TYPE

The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrAS4Byte.

OBJECT-TYPE

This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.

OBJECT-TYPE

The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'.

OBJECT-TYPE

The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state.

OBJECT-TYPE

The value of vRtrRouterId specifies an Ipv4 IP address, uniquely identifying the router in the Autonomous System (AS). By convention, if the value of the vRtrRouterId is the default value, the router's IP interface address will be used as the operational router-id for the system.

OBJECT-TYPE

If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed.

OBJECT-TYPE

The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrConfederationAS4Byte.

OBJECT-TYPE

The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned. SNMP set of vRtrRouteDistinguisher to a non-default value will automatically set vRtrBgpAutoRD to 'false'.

OBJECT-TYPE

The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.

OBJECT-TYPE

The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.

OBJECT-TYPE

The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent. This object is made obsolete in release 14.0.

OBJECT-TYPE

The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router.

OBJECT-TYPE

The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.

OBJECT-TYPE

The value of vRtrGracefulRestart specifies whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis.

OBJECT-TYPE

The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover

OBJECT-TYPE

The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'.

OBJECT-TYPE

When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry.

OBJECT-TYPE

When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry.

OBJECT-TYPE

The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'.

OBJECT-TYPE

The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.

OBJECT-TYPE

The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set.

OBJECT-TYPE

The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.

OBJECT-TYPE

The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.

OBJECT-TYPE

The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router.

OBJECT-TYPE

The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit.

OBJECT-TYPE

The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.

OBJECT-TYPE

The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.

OBJECT-TYPE

If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error.

OBJECT-TYPE

The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.

OBJECT-TYPE

The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'.

OBJECT-TYPE

The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'.

OBJECT-TYPE

The unique value of vRtrSecondaryVrfId indicates the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route table for hub and spoke vprn system.

OBJECT-TYPE

The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'.

OBJECT-TYPE

The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.

OBJECT-TYPE

The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.

OBJECT-TYPE

The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.

OBJECT-TYPE

The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.

OBJECT-TYPE

If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error.

OBJECT-TYPE

The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router.

OBJECT-TYPE

The value of vRtrIgnoreNextHopMetric specifies whether next-hop metric should be ignored when computing ECMP paths for VPRN routes.

OBJECT-TYPE

The value of vRtrMvpnVrfTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrMvpnVrfExportTarget or vRtrMvpnVrfImportTarget has been set.

OBJECT-TYPE

The value of vRtrMvpnVrfExportTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrMvpnVrfTarget has been set.

OBJECT-TYPE

The value of vRtrMvpnVrfImportTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrMvpnVrfTarget has been set.

OBJECT-TYPE

The value of vRtrMvpnVrfTargetUnicast specifies whether unicast vrf-target extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfTarget extended community is used for MVPN.

OBJECT-TYPE

The value of vRtrMvpnVrfExportTargetUnicast specifies whether unicast vrf-target import extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfExportTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfExportTarget extended community is used for MVPN.

OBJECT-TYPE

The value of vRtrMvpnVrfImportTargetUnicast specifies whether unicast vrf-target export extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfImportTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfImportTarget extended community is used for MVPN.

OBJECT-TYPE

The value of vRtrAS4Byte specifies the autonomous system number to be advertised to this peer. This object MUST be set before BGP can be activated.

OBJECT-TYPE

The value of vRtrConfederationAS4Byte specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS.

OBJECT-TYPE

The value of vRtrMvpnCMcastImportRT indicates C-multicast Import Route that uniquely identifies a VRF. vRtrMvpnCMcastImportRT controls imports of C-multicast routes into a particular VRF. A PE that has sites of a given MVPN connected to it needs to communicate the value of the C-multicast Import RT associated with the VRF of that MVPN on the PE to all other PEs that have sites of that MVPN. A PE that originates a (unicast) route to VPN-IP addresses must include in the BGP Update message the value of the C-multicast Import RT of the VRF associated with the route.

OBJECT-TYPE

When the object vRtrType has a value of 'vprn', the value of vRtrInterASMvpn indicates whether the VPRN service is used for inter-AS MVPN or not. If the value of the object is 'true', it indicates that the vprn service is used for inter-AS MVPN only. If the value of the object is 'false', it indicates that the vprn service is not used for inter-AS MVPN.

OBJECT-TYPE

The desired state for RIP-NG on this virtual router. An attempt to set vRtrRipNgStatus to 'delete' will fail if the RIP-NG protocol is not in the admininistrative outOfService state.

OBJECT-TYPE

The vRtrStatTable has an entry for each virtual router configured in the system.

OBJECT-TYPE

Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

vRtrOperState indicates current operational status of this virtual router.

OBJECT-TYPE

vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table.

OBJECT-TYPE

vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table.

OBJECT-TYPE

vRtrStaticRoutes indicates the current number of static routes for this instance of the route table.

OBJECT-TYPE

vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table.

OBJECT-TYPE

vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table.

OBJECT-TYPE

vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table.

OBJECT-TYPE

vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table.

OBJECT-TYPE

vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table.

OBJECT-TYPE

vRtrISISRoutes indicates the current number of isis routes for this instance of the route table.

OBJECT-TYPE

vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table.

OBJECT-TYPE

vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table.

OBJECT-TYPE

vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table.

OBJECT-TYPE

vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table.

OBJECT-TYPE

vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table.

OBJECT-TYPE

vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router.

OBJECT-TYPE

vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.

OBJECT-TYPE

vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router.

OBJECT-TYPE

vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router.

OBJECT-TYPE

vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router.

OBJECT-TYPE

vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router.

OBJECT-TYPE

vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels.

OBJECT-TYPE

vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels.

OBJECT-TYPE

vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrInetTunnelTable where vRtrInetTunnelType has a value of 'ldp'.

OBJECT-TYPE

vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrInetTunnelTable where vRtrInetTunnelType has a value of 'sdp'.

OBJECT-TYPE

vRtrMulticastRoutes indicates the current number of rows in the vRtrPimNgGrpSrcTable.

OBJECT-TYPE

vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system.

OBJECT-TYPE

vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system.

OBJECT-TYPE

vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table.

OBJECT-TYPE

vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table.

OBJECT-TYPE

vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table.

OBJECT-TYPE

vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table.

OBJECT-TYPE

vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table.

OBJECT-TYPE

vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table.

OBJECT-TYPE

vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table.

OBJECT-TYPE

vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table.

OBJECT-TYPE

vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table.

OBJECT-TYPE

vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table.

OBJECT-TYPE

vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table.

OBJECT-TYPE

vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table.

OBJECT-TYPE

vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table.

OBJECT-TYPE

vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table.

OBJECT-TYPE

vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router.

OBJECT-TYPE

vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.

OBJECT-TYPE

vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router.

OBJECT-TYPE

vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router.

OBJECT-TYPE

vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router.

OBJECT-TYPE

vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router.

OBJECT-TYPE

vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels.

OBJECT-TYPE

vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels.

OBJECT-TYPE

vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrInetTunnelTable where vRtrInetTunnelType has a value of 'ldp'.

OBJECT-TYPE

vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrInetTunnelTable where vRtrInetTunnelType has a value of 'sdp'.

OBJECT-TYPE

vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimNgGrpSrcTable.

OBJECT-TYPE

vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system.

OBJECT-TYPE

vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table.

OBJECT-TYPE

The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes.

OBJECT-TYPE

The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels.

OBJECT-TYPE

The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrInetTunnelTable where vRtrInetTunnelType has a value of 'rsvp'.

OBJECT-TYPE

The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels.

OBJECT-TYPE

The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrInetTunnelTable where vRtrInetTunnelType has a value of 'rsvp'.

OBJECT-TYPE

The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table.

OBJECT-TYPE

The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table.

OBJECT-TYPE

The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system.

OBJECT-TYPE

vRtrLDPRoutes indicates the current number of ldp routes for this instance of the route table.

OBJECT-TYPE

vRtrLDPActiveRoutes indicates the current number of active ldp routes for this instance of the route table.

OBJECT-TYPE

vRtrVPNLeakRoutes indicates the current number of VPN Leak routes for this instance of the route table.

OBJECT-TYPE

vRtrVPNLeakActiveRoutes indicates the current number of active VPN Leak routes for this instance of the route table.

OBJECT-TYPE

vRtrV6VPNLeakRoutes indicates the current number of v6 VPN Leak routes for this instance of the route table.

OBJECT-TYPE

vRtrV6VPNLeakActiveRoutes indicates the current number of v6 active VPN Leak routes for this instance of the route table.

OBJECT-TYPE

vRtrV6SubMgmtRoutes indicates the current number of v6 subscriber management routes for this instance of the route table.

OBJECT-TYPE

vRtrV6SubMgmtActiveRoutes indicates the current number of v6 active subscriber management routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrMobileHostRoutes indicates the current number of IPv4 Mobile Host routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrMobileHostActiveRoutes indicates the current number of IPv4 active Mobile Host routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6MobileHostRoutes indicates the current number of IPv6 Mobile Host routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6MobileHostActiveRoutes indicates the current number of IPv6 active Mobile Host routes for this instance of the route table.

OBJECT-TYPE

vRtrStatTotalBgpTunnels indicates the current number of both active and inactive BGP tunnels.

OBJECT-TYPE

vRtrStatActiveBgpTunnels indicates the current number of rows in the vRtrInetTunnelTable where vRtrInetTunnelType has a value of 'bgp'.

OBJECT-TYPE

The value of vRtrNatRoutes indicates the current number of IPv4 NAT (Network Address Translation) routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrNatActiveRoutes indicates the current number of IPv4 NAT routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6NatRoutes indicates the current number of IPv6 NAT routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6NatActiveRoutes indicates the current number of IPv6 active NAT routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrPeriodicRoutes indicates the current number of periodic routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrPeriodicActiveRoutes indicates the current number of active periodic routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6PeriodicRoutes indicates the current number of IPv6 periodic routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6PeriodicActiveRoutes indicates the current number of active IPv6 periodic routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6ManagedRoutes indicates the total number of active and inactive IPv6 managed routes for the specified virtual router.

OBJECT-TYPE

The value of vRtrV6ManagedActiveRoutes indicates the total number of active IPv6 managed routes for the specified virtual router.

OBJECT-TYPE

vRtrStatTotalMplsTpTunnels indicates the current number of both active and inactive MPLS-TP tunnels.

OBJECT-TYPE

vRtrStatActiveMplsTpTunnels indicates the current number of active MPLS-TP tunnels.

OBJECT-TYPE

The value of vRtrV6Dhcpv6PdRoutes indicates the current number of IPv6 DHCPv6 delegated prefix routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6Dhcpv6PdActiveRoutes indicates the current number of active IPv6 DHCPv6 delegated prefix routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6Dhcpv6NaRoutes indicates the current number of IPv6 DHCPv6 non-temporary address routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6Dhcpv6NaActiveRoutes indicates the current number of active IPv6 DHCPv6 non-temporary address routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6Dhcpv6TaRoutes indicates the current number of IPv6 DHCPv6 temporary address routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6Dhcpv6TaActiveRoutes indicates the current number of active IPv6 DHCPv6 temporary address routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6Dhcpv6PdExclRoutes indicates the current number of IPv6 DHCPv6 delegated prefix exclude routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrV6Dhcpv6PdExclActiveRoutes indicates the current number of active IPv6 DHCPv6 delegated prefix exclude routes for this instance of the route table.

OBJECT-TYPE

The value of the object vRtrIPsecRoutes indicates the current number of IPsec routes for this instance of the route table.

OBJECT-TYPE

The value of the object vRtrIPsecActiveRoutes indicates the current number of active IPsec routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrStatBGPEVPNARPEntries indicates the total number of BGP EVPN ARP entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatBGPEvpnRoutes indicates the total number of IPv4 BGP EVPN route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatBGPEvpnActiveRoutes indicates the total number of active IPv4 BGP EVPN route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrV6StatBGPEvpnRoutes indicates the total number of IPv6 BGP EVPN route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrV6StatBGPEvpnActiveRoutes indicates the total number of active IPv6 BGP EVPN route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrMcastIpv4StatBGPEvpnRoutes indicates the total number of IPv4 Multicast BGP EVPN route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrMcastIpv4StatBGPEvpnActvRts indicates the total number of active IPv4 Multicast BGP EVPN route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrMcastIpv6StatBGPEvpnRoutes indicates the total number of IPv6 Multicast BGP EVPN route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrMcastIpv6StatBGPEvpnActvRts indicates the total number of active IPv6 Multicast BGP EVPN route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of the object vRtrV6IPsecRoutes indicates the current number of IPv6 IPsec routes for this instance of the route table.

OBJECT-TYPE

The value of the object vRtrV6IPsecActiveRoutes indicates the current number of active IPv6 IPsec routes for this instance of the route table.

OBJECT-TYPE

The value of vRtrStatBGPLabelV4Routes indicates the total number of labeled IPv4 BGP route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatBGPLabelV4ActiveRoutes indicates the total number of active labeled IPv4 BGP route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatBGPLabelV6Routes indicates the total number of labeled IPv6 BGP route entries for the specified virtual router in the system.

OBJECT-TYPE

The value of vRtrStatBGPLabelV6ActiveRoutes indicates the total number of active labeled IPv6 BGP route entries for the specified virtual router in the system.

OBJECT-TYPE

The number of router interfaces configured in this system.

OBJECT-TYPE

The vRtrIfTable has an entry for each router interface configured in the system.

OBJECT-TYPE

Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.

OBJECT-TYPE

The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.

OBJECT-TYPE

The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized.

OBJECT-TYPE

The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror. serviceVideo - defined on a video SAP. serviceVplsVideo - defined on an IP endpoint for video interface for VPLS. multiHomingPrimary - obsoleted. multiHomingSecondary - obsoleted. serviceIesTunnel - defined on a SAP. serviceIpReas - defined on a network port. networkIpReas - defined on a network port. networkVprn - network interface defined in a VPRN. reserved25 - threat management service interface. serviceIesAarp - defined on an AARP (Asymmetry Removal) Spoke SDP. serviceVprnAarp - defined on an AARP Spoke SDP. serviceIesAa - defined on an AA (Application Assurance) SAP. serviceVprnAa - defined on an AA SAP. unnumMplsTp - defined for an unnumbered mpls tp interface. controlTunnel - can have an IP tunnel. pdn - defined for a packet data network interface.

OBJECT-TYPE

The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName.

OBJECT-TYPE

The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device.

OBJECT-TYPE

When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0.

OBJECT-TYPE

The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port.

OBJECT-TYPE

The desired administrative state for this router interface.

OBJECT-TYPE

The current operational status of this router interface.

OBJECT-TYPE

An alternative administrative name assigned to this router interface.

OBJECT-TYPE

The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object.

OBJECT-TYPE

The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache.

OBJECT-TYPE

When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received.

OBJECT-TYPE

When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated.

OBJECT-TYPE

The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime.

OBJECT-TYPE

The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame.

OBJECT-TYPE

When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent.

OBJECT-TYPE

The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime.

OBJECT-TYPE

The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame.

OBJECT-TYPE

When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent.

OBJECT-TYPE

The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime.

OBJECT-TYPE

The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame.

OBJECT-TYPE

When vRtrIfNtpBroadcast is set to 'true', NTP/SNTP broadcasts will be received on this interface.

OBJECT-TYPE

The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable.

OBJECT-TYPE

The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size.

OBJECT-TYPE

The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface. This object is obsoleted in release 10.0 and replaced with object vRtrIfQosNetworkPolicyId.

OBJECT-TYPE

The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.

OBJECT-TYPE

The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.

OBJECT-TYPE

When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks.

OBJECT-TYPE

Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'.

OBJECT-TYPE

The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null.

OBJECT-TYPE

The value of vRtrIfCflowd specifies the type and direction of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of 'none (1)' indicates that there is no Cflowd analysis associated with this interface.

OBJECT-TYPE

The value of vRtrIfVPNClass indicates the type of VPN scenario supported on this virtual router interface.

OBJECT-TYPE

The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of printable, seven-bit ASCII characters.

OBJECT-TYPE

The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface.

OBJECT-TYPE

The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default.

OBJECT-TYPE

The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created.

OBJECT-TYPE

The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled.

OBJECT-TYPE

The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured. Object iesIfIPv6ConfigAllowed should be set if vRtrIfType is 'subscriber' or 'group'.

OBJECT-TYPE

The current operational status for IPv6 on this router interface.

OBJECT-TYPE

The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.

OBJECT-TYPE

The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.

OBJECT-TYPE

When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated.

OBJECT-TYPE

The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime.

OBJECT-TYPE

The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame.

OBJECT-TYPE

When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent.

OBJECT-TYPE

The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime.

OBJECT-TYPE

The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame.

OBJECT-TYPE

The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent.

OBJECT-TYPE

The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime.

OBJECT-TYPE

The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame.

OBJECT-TYPE

The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent.

OBJECT-TYPE

The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime.

OBJECT-TYPE

The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame.

OBJECT-TYPE

The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent.

OBJECT-TYPE

The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime.

OBJECT-TYPE

The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame.

OBJECT-TYPE

The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise.

OBJECT-TYPE

The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'.

OBJECT-TYPE

The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'.

OBJECT-TYPE

The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed.

OBJECT-TYPE

The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to.

OBJECT-TYPE

The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.

OBJECT-TYPE

The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. When used to configure delayed-enable for a router interface, the values specified for vRtrIfDelaySeconds can be in the range of 0..1200. When used to configure hold-time of a Multi-homing secondary interface, the values specified can be in the range of 0..65535. The default value of vRtrIfDelaySeconds is also based on the router interface type. When used for a regular interface its default value is 0. When used for a Multi-homing secondary interface, its default value is 30.

OBJECT-TYPE

The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0.

OBJECT-TYPE

The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an IP address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.

OBJECT-TYPE

The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds.

OBJECT-TYPE

The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 255 service used internally. serviceIes 254 serviceRtdVpls obsoleted. serviceVprn 254 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 254 serviceVprnIPMirror 0 serviceVideo 0 serviceVplsVideo 0 multiHomingPrimary 0 multiHomingSecondary 0 serviceIesTunnel 254 serviceIpReas 0 networkIpReas 0 networkVprn 255 tmsService 255 serviceIesAarp 0 serviceVprnAarp 0 serviceIesAa 0 serviceVprnAa 0 unnumMplsTp 255 gmplsLoopback 255 If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.

OBJECT-TYPE

The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.

OBJECT-TYPE

The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available.

OBJECT-TYPE

The value of vRtrIfStripLabel specifies whether a packet received on the interface will have it's MPLS labels stripped from the packet (true) or not (false).

OBJECT-TYPE

The value of vRtrIfuRPFCheckState specifies whether unicast RPF (uRPF) Check is enabled on this interface.

OBJECT-TYPE

The value of vRtrIfuRPFCheckMode specifies the mode of unicast RPF check. In 'strict' mode, uRPF checks whether incoming packet has a source address that matches a prefix in the routing table, and whether the interface expects to receive a packet with this source address prefix. In 'loose' mode, uRPF checks whether incoming packet has source address with a corresponding prefix in the routing table, however 'loose' mode does not check whether the interface expects to receive a packet with a specific source address prefix. In 'strictNoEcmp' mode, when a packet is received on an interface and the source address matches an ECMP route the packet is dropped by uRPF. If source address does not match an ECMP route, the behavior is same as 'strict' mode. This object is valid only when value of vRtrIfuRPFCheckState is set to 'enabled'.

OBJECT-TYPE

The value of vRtrIfQosQGrp specifies the name of the QoS queue-group (TIMETRA-QOS-MIB::tQosEgrQGroupName) used with this interface. An 'inconsistentValue' error is returned if this object is set to a non-default value and an entry corresponding to vRtrIfPortID does not exist in TIMETRA-PORT-MIB::tPortNetEgrQGrpTable. This object is obsoleted in release 10.0 and replaced with object vRtrIfQosEgrPortRedirectQGrp.

OBJECT-TYPE

The value of vRtrIfAdminLinkLocalAddrType specifies the IP address type of the link local address of this virtual router interface.

OBJECT-TYPE

The value of vRtrIfAdminLinkLocalAddr specifies the link local IP address of this virtual router interface. Last four bytes of the address ('zone') refers to router interface identifier (vRtrIfIndex). This object will return default value of empty string when vRtrIfAdminLinkLocalAddrType is set to 'unknown'.

OBJECT-TYPE

The value of vRtrIfAdmLnkLclAddrPreferred specifies whether vRtrIfAdminLinkLocalAddr specified for this interface should be treated as preferred and disable duplicate address detection (DAD).

OBJECT-TYPE

The value of vRtrIfOperDownReason indicates the reason why the interface is operationally down. The bit values are: 'ifAdminDown (0)' - Interface is administratively down 'svcAdminDown (1)' - Service is administratively down 'portOperDown (2)' - SAP port is operationally down 'addrOrIfNotReady (3)' - Address or Parent interface is not ready 'assocObjNotReady (4)' - Associated object is not ready 'rvplsDown (5)' - R-VPLS service is down 'operGrpDown (6)' - Associated Operational Group is down 'ifAdminDestroy (7)' - Interface is being deleted 'noIfAddress (8)' - Interface address is not configured 'noIfInfo (9)' - Interface info not present 'delayedStartEnabled (10)' - Delayed start timer is enabled on the interface 'ifProtoOperDown (11)' - Protocols on interface are operationally down 'invalidPortCfg (12)' - Port configuration is not valid 'unknown (13)' - Reason is unknown 'noRouteDistinguisher (14)' - Route Distinguisher not configured in VPRN 'wlanGwRedundancyStandby (15) - Interface is in standby state for WLAN-GW redundancy 'wlanGwGroupDegraded (16) - The associated WLAN-GW group is in a degraded state

OBJECT-TYPE

This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex).

OBJECT-TYPE

Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.

OBJECT-TYPE

The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID.

OBJECT-TYPE

The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it.

OBJECT-TYPE

Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned.

OBJECT-TYPE

The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. The values greater than 256 are reserved for internal interfaces only and cannot be used to create an IP address entry.

OBJECT-TYPE

The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state.

OBJECT-TYPE

The IP address assigned to a router's interface.

OBJECT-TYPE

The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.

OBJECT-TYPE

When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the <prefix>-1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the <prefix>-1 address is 10.10.31.255.

OBJECT-TYPE

The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface.

OBJECT-TYPE

This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates.

OBJECT-TYPE

vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface.

OBJECT-TYPE

The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface.

OBJECT-TYPE

The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address.

OBJECT-TYPE

The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface.

OBJECT-TYPE

The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'.

OBJECT-TYPE

The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object.

OBJECT-TYPE

The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress.

OBJECT-TYPE

The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface.

OBJECT-TYPE

The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp.

OBJECT-TYPE

The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface.

OBJECT-TYPE

The value of vRiaInetAddrPreferred specifies whether vRiaInetAddress specified for this interface should be treated as preferred and disable duplicate address detection (DAD).

OBJECT-TYPE

The value of vRiaSubscrPrefix specifies whether the vRiaIpAddress specified for this interface should be treated as a subscriber prefix. This object cannot be modified once the row is created.

OBJECT-TYPE

The value of vRiaSubscrPrefixType specifies the type of subscriber prefix contained in vRiaIpAddress if vRiaSubscrPrefix is TRUE. This object cannot be modified once the row is created.

OBJECT-TYPE

The value of vRiaSubscrHostRoutePopulate specifies if subscriber host routes are populated in the FIB (Forwarding Information Base). This object can only be set to 'true' if the address is configured on a subscriber interface.

OBJECT-TYPE

The value of vRiaTrackSrrpInstance specifies the SRRP instance whose state is tracked on this ipaddress.

OBJECT-TYPE

The value of vRiaHoldUpTime specifies the time to wait for the route to accept new state of the SRRP instance which is being tracked with this address. An 'inconsistentValue' error is returned if vRiaHoldUpTime is set to non-default value when vRiaTrackSrrpInstance is set to its default value.

OBJECT-TYPE

The value of vRiaCreationOrigin indicates the mechanism used to create this entry.

OBJECT-TYPE

The value of vRiaInetAddressSendCgaModifier specifies the modifier used during CGA generation. The value of vRiaInetAddressSendCgaModifier must have been generated with the RSA key pair and security parameter that is associated with this interface. The value all zeroes means that no modifier is specified; however, setting the value to all zeroes in an existing row while Secure Neighbor Discovery is enabled on its interface, causes the generation of a new CGA and a new modifier; Secure Neighbor Discovery is enabled on its interface by means of the object vRtrIfSendAdminState.

OBJECT-TYPE

The value of vRiaInetAddressPrimaryPreference specifies the order in which the address is used by control plane protocols and applications which require a fixed address of the interface. These include LDP and Segment Routing. When originating packets from this interface, the source IPv6 address follows the selection rules in RFC 6724 except for the specific cases where a fixed address is required. In the latter case, the IPv6 address with the lowest primary-preference index is selected. If the selected address is removed, the system selects the IPv6 address with the next lowest primary-preference index. The address index space is unique across all addresses of a given interface.

OBJECT-TYPE

The value of vRiaInetAddressPrimaryPreferred indicates that this IP address is selected as the interface primary preferred IP address. Only one IP address per address family will be selected as primary preferred.

OBJECT-TYPE

The value of vRiaInetAddressGreTermination indicates that GRE-MPLS packets with the destination IP specified by vRiaInetAddress and vRiaInetPrefixLen can be terminated on this router interface.

OBJECT-TYPE

The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable in the IP-FORWARD-MIB.

OBJECT-TYPE

Each row entry in the vRtrIpCidrRouteTable represents additional columns for attributes specific to the Nokia SROS series implementation for the IP route table.

OBJECT-TYPE

The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry.

OBJECT-TYPE

When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrIpCidrRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes

OBJECT-TYPE

The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.

OBJECT-TYPE

The number of current vRtrInetStaticRouteTable entries that are 'active'.

OBJECT-TYPE

This entity's Static Routing table. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

A particular route to a particular destination, through a particular next hop. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The quaternary index for the vRtrStaticRouteTable. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The row status variable, used according to row installation and removal conventions. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime value when vRtrStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The value of vRtrStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The value of vRtrStaticRouteStaticType specifies the type of static route represented by this row entry. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The value of vRtrStaticRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes This object was made obsolete in the 15.0 release.

OBJECT-TYPE

When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The outgoing ifIndex for this route as computed by the static route module. This variable will have a value of 0 if vRtrStaticRouteStatus is 'inactive' or if this static route is configured as a black hole. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

In case of remote routes, the address of the next system en route. This member is complemented by vRtrStaticRouteNextHopUnnumberedIf. At most only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The name of the unnumbered Interface which will be the nexthop for this route. This member is complemented by vRtrStaticRouteNextHop. At most only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The desired administrative state for this virtual router static route. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The value of vRtrStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop. This object was replaced by vRtrInetSRIndirectTunnelLdp and vRtrInetSRIndirectTunnelRsvpTe objects in 13.0.

OBJECT-TYPE

The value of vRtrStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If the value of vRtrStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort. This object was replaced by vRtrInetSRIndirectTunnelDisalIgp object in 13.0.

OBJECT-TYPE

The value of vRtrStaticRouteTag is used to add a 32-bit integer tag to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The vRtrSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address ranges assigned to it.

OBJECT-TYPE

Each row entry represents an IP address range assigned a virtual router service interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires values for all column variables to have been assigned.

OBJECT-TYPE

The IP address prefix range assigned to a router's service interface.

OBJECT-TYPE

The subnet mask associated with the Service IP address of this entry. The value of the mask is an 32-bit integer with all the network bits set to 1 and all the host bits set to 0.

OBJECT-TYPE

The row status used for creation, deletion, or control of vRtrSvcIpRangeTable entries.

OBJECT-TYPE

When vRtrSvcIpRangeExclusive has a value of 'true', this set of addresses is reserved for services only and cannot be assigned to network ports. When it has a value of 'false', it could be used for services as well as network ports.

OBJECT-TYPE

The vRtrIpNetToMediaTable provides an extension of the ipNetToMediaTable in the IP-MIB.

OBJECT-TYPE

Each row entry in the vRtrIpNetToMediaTable represents additional columns for attributes specific to the Nokia SROS series implementation for the vRtrIpNetToMediaTable.

OBJECT-TYPE

The value of vRtrIpNetToMediaTimer determines how much longer an ARP entry associated with an vRtrIpNetToMediaTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared from the cache.

OBJECT-TYPE

The value of vRtrIpNetToMediaOperState indicates if the ARP entry is being used actively in the ARP Table. When ipNetToMediaType has a value 'dynamic', vRtrIpNetToMediaOperState will never have a value of 'outOfService'.

OBJECT-TYPE

Timestamp of the last change to the vRtrInstanceAggregationTable either from adding a row or removing a row.

OBJECT-TYPE

The vRtrInstanceAggregationTable is the list of configured VRtr aggregations and their operational status information. Specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated. This table was obsoleted in release 7.0. It is replaced with the vRtrInetInstAggrTable to support ipv6 addresses.

OBJECT-TYPE

An entry (conceptual row) in the vRtrInstanceAggregationTable. Entries are created by user. Entries are destroyed by user.

OBJECT-TYPE

IP address prefix to match for the aggregation.

OBJECT-TYPE

Mask length for vRtrAggregationIpPrefix, to match for the aggregation.

OBJECT-TYPE

Row status for this entry.

OBJECT-TYPE

Time stamp of last change of any object for this entry.

OBJECT-TYPE

When true(1), only the aggregate is advertised, the more specific routes that make up the aggregate are not. When false(2), both the aggregate and more specific components are advertised.

OBJECT-TYPE

When true(1), the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When false(2), the AS-Path will contain no AS-SET and will be originated by the ESR.

OBJECT-TYPE

When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.

OBJECT-TYPE

When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.

OBJECT-TYPE

vRtrAggregationOperState indicates the current operational status of the aggregation entry.

OBJECT-TYPE

This entity's Static Route Index Table. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The available index for the vRtrStaticRouteTable for every destination per virtual router. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The destination IP address of this index entry. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest. This object was made obsolete in the 15.0 release.

OBJECT-TYPE

The available quaternary index for the vRtrStaticRouteTable. This object was made obsolete in the 15.0 release.

OBJECT-IDENTITY

OBJECT-TYPE

The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.

OBJECT-TYPE

The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable.

OBJECT-TYPE

The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminState equal 'inService'.

OBJECT-TYPE

Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold.

OBJECT-TYPE

vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system.

OBJECT-TYPE

The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold.

OBJECT-TYPE

The value of the object vRtrSendKeyRollover indicates if this system is currently performing a Secure Neighbor Discovery (Send) RSA (public key crypto-system) key pair rollover. During a Secure Neighbor Discovery key pair rollover, the key pair in use is replaced with another one; during the process, Cryptographically Generated Addresses (CGA) are refreshed.

OBJECT-TYPE

The vRtrPolicyTable has an entry for each virtual router configured in the system.

OBJECT-TYPE

Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The value of vRtrImportPolicy1 is the name of the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy1.

OBJECT-TYPE

The value of vRtrImportPolicy2 is the name of the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy2.

OBJECT-TYPE

The value of vRtrImportPolicy3 is the name of the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy3.

OBJECT-TYPE

The value of vRtrImportPolicy4 is the name of the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy4.

OBJECT-TYPE

The value of vRtrImportPolicy5 is the name of the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy5.

OBJECT-TYPE

The value of vRtrExportPolicy1 is the name of the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy1.

OBJECT-TYPE

The value of vRtrExportPolicy2 is the name of the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy2.

OBJECT-TYPE

The value of vRtrExportPolicy3 is the name of the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy3.

OBJECT-TYPE

The value of vRtrExportPolicy4 is the name of the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy4.

OBJECT-TYPE

The value of vRtrExportPolicy5 is the name of the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy5.

OBJECT-TYPE

The value of vRtrMvpnImportPolicy1 is the name of the first policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy1.

OBJECT-TYPE

The value of vRtrMvpnImportPolicy2 is the name of the second policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy2.

OBJECT-TYPE

The value of vRtrMvpnImportPolicy3 is the name of the third policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy3.

OBJECT-TYPE

The value of vRtrMvpnImportPolicy4 is the name of the fourth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy4.

OBJECT-TYPE

The value of vRtrMvpnImportPolicy5 is the name of the fifth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy5.

OBJECT-TYPE

The value of vRtrMvpnExportPolicy1 is the name of the first policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy1.

OBJECT-TYPE

The value of vRtrMvpnExportPolicy2 is the name of the second policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy2.

OBJECT-TYPE

The value of vRtrMvpnExportPolicy3 is the name of the third policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy3.

OBJECT-TYPE

The value of vRtrMvpnExportPolicy4 is the name of the fourth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy4.

OBJECT-TYPE

The value of vRtrMvpnExportPolicy5 is the name of the fifth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy5.

OBJECT-TYPE

The value of vRtrMvpnImportPolicyUnicast specifies whether unicast vrf-import policy is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrImportPolicy1 through vRtrImportPolicy5 are used for MVPN. If the value is 'false', vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5 are used for MVPN.

OBJECT-TYPE

The value of vRtrMvpnExportPolicyUnicast specifies whether unicast vrf-export policy is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrExportPolicy1 through vRtrExportPolicy5 is used for MVPN. If the value is 'false', vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5 is used for MVPN.

OBJECT-TYPE

The value of vRtrGrtMaxExportRoutes specifies the maximum number of routes that can be exported from the VRF to the GRT.

OBJECT-TYPE

The value of vRtrGrtExportPolicy1 specifies the name of the first policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.

OBJECT-TYPE

The value of vRtrGrtExportPolicy2 specifies the name of the second policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.

OBJECT-TYPE

The value of vRtrGrtExportPolicy3 specifies the name of the third policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.

OBJECT-TYPE

The value of vRtrGrtExportPolicy4 specifies the name of the fourth policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.

OBJECT-TYPE

The value of vRtrGrtExportPolicy5 specifies the name of the fifth policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.

OBJECT-TYPE

The value of vRtrGrtMaxIpv6ExportRoutes specifies the maximum number of IPv6 routes that can be exported from the VRF to the GRT. When the value of this object is set to '0', there is no limit on the number of routes exported from the VRF to the GRT.

OBJECT-TYPE

The value of vRtrGrtImportPolicy1 specifies the name of the first policy to be used for determining which routes are imported from the GRT to the VRF. If no import policy is defined, no routes are imported from the GRT. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrGrtImportPolicy1 through vRtrGrtImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.

OBJECT-TYPE

The value of vRtrGrtImportPolicy2 specifies the name of the second policy to be used for determining which routes are imported from the GRT to the VRF.If no import policy is defined, no routes are imported from the GRT. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrGrtImportPolicy1 through vRtrGrtImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. It is required to configure vRtrGrtImportPolicy1 before configuring vRtrGrtImportPolicy2.

OBJECT-TYPE

The value of vRtrGrtImportPolicy3 specifies the name of the third policy to be used for determining which routes are imported from the GRT to the VRF. If no import policy is defined, no routes are imported from the GRT. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrGrtImportPolicy1 through vRtrGrtImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. It is required to configure vRtrGrtImportPolicy2 before configuring vRtrGrtImportPolicy3.

OBJECT-TYPE

The value of vRtrGrtImportPolicy4 specifies the name of the fourth policy to be used for determining which routes are imported from the GRT to the VRF. If no import policy is defined, no routes are imported from the GRT. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrGrtImportPolicy1 through vRtrGrtImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. It is required to configure vRtrGrtImportPolicy3 before configuring vRtrGrtImportPolicy4.

OBJECT-TYPE

The value of vRtrGrtImportPolicy5 specifies the name of the fifth policy to be used for determining which routes are imported from the GRT to the VRF. If no import policy is defined, no routes are imported from the GRT. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrGrtImportPolicy1 through vRtrGrtImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. It is required to configure vRtrGrtImportPolicy4 before configuring vRtrGrtImportPolicy5.

OBJECT-TYPE

vRtrTunnelTable maintains a list of tunnels for the specific router instance. This table has been replaced by vRtrInetTunnelTable in 13.0.

OBJECT-TYPE

vRtrTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination could established using GRE, LDP, RSVP or could be a static LSP.

OBJECT-TYPE

vRtrTunnelDest maintains the destination IP address of this tunnel. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrTunnelMask object is not equal to x.

OBJECT-TYPE

vRtrTunnelMask indicates the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrTunnelDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrTunnelMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest.

OBJECT-TYPE

The value of vRtrTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources such as LDP, RSVP, GRE etc. This is an absolute number used internally by the system to specify preferences for the tunnel. Lowest number signifies the most preferred entry in the table.

OBJECT-TYPE

The type of this tunnel entity.

OBJECT-TYPE

Additional index provided to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'sdp'. In such cases the vRtrTunnelID will hold the SDP Id. There could be multiple tunnels for the type 'ldp'. In such cases the vRtrTunnelID will hold the LSPId of the LSP in use. For other vRtrTunnelType values this field will always be 0 as only a single tunnel is established using other tunnel types.

OBJECT-TYPE

The address of the next system en route; Otherwise, 0.0.0.0.

OBJECT-TYPE

vRtrTunnelMetric maintains the metric of the tunnel. This is used in addition to the preference for this tunnel.

OBJECT-TYPE

The number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of `too old' can be implied except through knowledge of owner of the tunnel.

OBJECT-TYPE

The value of vRtrTunnelNextHopFlags indicates the properties of the tunnel next hop. A value of 'none' indicates that no next-hop is present. A value of 'hasLfa' indicates that an LFA next-hop is present in addition to the regular next-hop. A value of 'hasBackup' indicates that this route has a backup route. A value of 'isBackup' indicates that this route is a backup route to another route with the same prefix. A value of 'isBgpInactive' indicates that this route is an inactive best-external route exported from BGP.

OBJECT-TYPE

The vRtrIfProxyArpTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.

OBJECT-TYPE

Each row entry represents information related to Proxy ARP for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

If the value of vRtrIfProxyArp is set to 'true', proxy ARP is enabled on this interface. If this value is 'false', proxy ARP is disabled on the interface.

OBJECT-TYPE

If the value of vRtrIfProxyArpLocal is set to 'true', local proxy ARP is enabled, that is, the interface will reply to ARP requests even if both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyArpLocal is set to 'false', the interface will not reply to ARP requests if both the hosts are on the same subnet.

OBJECT-TYPE

The value of vRtrIfProxyArpPolicy1 is used to specify the first proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp is set to 'false'.

OBJECT-TYPE

The value of vRtrIfProxyArpPolicy2 is used to specify the second proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp is set to 'false'.

OBJECT-TYPE

The value of vRtrIfProxyArpPolicy3 is used to specify the third proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp is set to 'false'.

OBJECT-TYPE

The value of vRtrIfProxyArpPolicy4 is used to specify the fourth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp is set to 'false'.

OBJECT-TYPE

The value of vRtrIfProxyArpPolicy5 is used to specify the fifth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp is set to 'false'.

OBJECT-TYPE

The vRtrIfDHCPTable is used to configure the interface parameters for the DHCP Relay agent.

OBJECT-TYPE

Each row entry represents information related to DHCP Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is disabled.

OBJECT-TYPE

vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with DHCP relay information drop(2) - discard messages with existing relay information if the option 82 information is also present. keep(3) - retain the existing relay information.

OBJECT-TYPE

The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it. If the value of this object is set to 'none', the circuit-id suboption will not be part of the information option (option 82). If the value of this object is set to 'ifIndex', the value of the interface index is used. If the value of this object is set to 'asciiTuple', the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') is used. If the value of this object is set to 'sapId', the ASCII-encoded SAP-id is used. If the value of this object is set to 'vlan-ascii-tuple' - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet. The value 'sapId(3)' can only be used if the interface is a service interface. The values 'portId(5)' and 'ifName(6)' can only be used if the interface is a network interface.

OBJECT-TYPE

The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption is left blank. If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr will be the remote-id.

OBJECT-TYPE

vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero value, auto-filtering is enabled and a filter allowing only PPPoE or DHCP traffic is established on the interface. The non-zero value indicates the maximum number of entries that the auto-filter can have. These entries are created by the agent upon snooping a valid DHCP Reply packet and are used to allow traffic sourced by the given DHCP-assigned IP address.

OBJECT-TYPE

vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded.

OBJECT-TYPE

vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded.

OBJECT-TYPE

vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded.

OBJECT-TYPE

vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded.

OBJECT-TYPE

vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded.

OBJECT-TYPE

vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded.

OBJECT-TYPE

vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded.

OBJECT-TYPE

vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded.

OBJECT-TYPE

When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero.

OBJECT-TYPE

vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType is network this object can only be set to 'outOfService'.

OBJECT-TYPE

vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface.

OBJECT-TYPE

The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.

OBJECT-TYPE

vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface.

OBJECT-TYPE

The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are created in the TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping valid 'DHCP ACK' messages.

OBJECT-TYPE

Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on the interface. The authentication policy must be defined in tmnxSubAuthPlcyTable.

OBJECT-TYPE

The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCPv4 lease states allowed - on this interface, if it is a retailer interface, or - per Service Access Point (SAP) or Managed SAP (MSAP) associated with this interface, in all other cases.

OBJECT-TYPE

The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interface.

OBJECT-TYPE

The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address.

OBJECT-TYPE

The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of vRtrIfDHCPGiAddressType.

OBJECT-TYPE

The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP address when communicating with the DHCP server. When it is set to 'true(1)', the source IP address used to communicate with the DHCP server is the gateway interface address. When it is 'false', the source IP is the IP of the egress interface the IP packet goes out on.

OBJECT-TYPE

The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP packets to match DHCP messages. When it is set to 'true(1)', the option 82 circuit ID is used in addition to the MAC address and transaction ID. When it is set to 'false', only the MAC address and transaction ID are used.

OBJECT-TYPE

The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to 'remote-id'.

OBJECT-TYPE

The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it is set to 'inService', the proxy server is enabled only if vRtrIfDHCPAdminState is also set to 'inService'.

OBJECT-TYPE

The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server. If this IP address is not configured, the value of vRiaIpAddress will be used as the source address of the emulated DHCP server.

OBJECT-TYPE

The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.

OBJECT-TYPE

The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server or local user database is presented to the DHCP client. By default the proxy server will always make use of vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server or local user database. When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the proxy server will use the lease time information provided by the RADIUS server or local user database, regardless of the configured one.

OBJECT-TYPE

The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Nokia vendor specific sub-option of option 82. The values 'serviceId(2)' and 'sapId(3)' can only be used if the interface is a service interface. The value 'portId(5)' can only be used if the interface is a network interface. The value of this object is only used when vRtrIfDHCPRelayInfoAction is 'replace(1)'.

OBJECT-TYPE

The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Nokia vendor specific sub-option of option 82. This string is only used when vRtrIfDHCPRelayInfoAction is set to 'replace(1)'.

OBJECT-TYPE

The value of vRtrIfDHCPLayer2Header specifies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in anti-spoof entries for the lease states on this interface. When it is set to 'false (2)', the client hardware address from the DHCP payload, stored in TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When it is set to 'true (1)', the behavior depends on the value of vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to all zeros, the source MAC address in the L2 header of the DHCP packet is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value is used. Only if the corresponding row in the vRtrIfTable has the value of the object vRtrIfType equal to 'serviceIesGroup', it is allowed to set the value of vRtrIfDHCPLayer2Header to 'true'.

OBJECT-TYPE

The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that is used in anti-spoof entries for the lease states on this interface. When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware address from the DHCP payload, stored in TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is all zeros, the source MAC address in the L2 header of the DHCP packet is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is not all zeros, then this value is used. This object can only be configured if the value of object vRtrIfDHCPLayer2Header is set to 'true (1)'.

OBJECT-TYPE

The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface.

OBJECT-TYPE

The value of vRtrIfDHCPRelayPlainBootp specifies whether plain bootp messages will be relayed. If set to 'disabled', the system will consider plain bootp packets as malformed DHCP packets and hence will not relay these messages.

OBJECT-TYPE

The value of vRtrIfDHCPUserDb specifies the local user database to authenticate against. If no authentication with the local user database is required, the value of this object must be set to the empty string.

OBJECT-TYPE

The value of vRtrIfDHCPUseArpForReply specifies, how the system determines the Hw address for outgoing IP packets. If set to 'false', the DHCP CHADDR (Client Hardware Address) is used. If set to 'true' the CHADDR is ignored, and ARP is used to determine the Hw address. Is set to TRUE, the system will accept all DHCP messages with CHADDR set to 00:00:00:00:00:00. This option only has effect on ethernet interfaces.

OBJECT-TYPE

The value of vRtrIfDHCPFilterId specifies the DHCP filter to apply. If no filtering is required, the value of this object must be set to 0.

OBJECT-TYPE

The value of vRtrIfDHCPRelayUnicastMsg specifies whether unicast messages will be relayed. If set to 'none', the system will not relay any messages. If set to 'renew', the system will only relay renew messages. If set to 'releaseUpdSrcIp', the system will relay renew and release messages.

OBJECT-TYPE

The value of vRtrIfDHCPPythonPolicy specifies the Python policy used for processing DHCP messages on this interface. The specified Python policy needs to exists in the TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable.

OBJECT-TYPE

The value of vRtrIfDHCPVirtualSubnet specifies if virtual subnetting is enabled for DHCPv4 hosts on this interface. The value 'enabled' is only supported while the value of the object vRtrIfType is equal to 'serviceIesSubscriber' or 'serviceVprnSubscriber'.

OBJECT-TYPE

The value of vRtrIfDHCPRelaySiaddrOvrAddrType specifies the type of vRtrIfDHCPRelaySiaddrOvrAddr.

OBJECT-TYPE

The value of vRtrIfDHCPRelaySiaddrOvrAddr specifies the IP address to use instead of the 'siaddr', while the value of vRtrIfDHCPRelayUnicastMsg is not 'none'.

OBJECT-TYPE

The vRtrIfDHCPRelayStatsTable contains the statistics for the DHCP Relay agent.

OBJECT-TYPE

Each row entry represents information related to DHCP Relay statistics for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

vRtrIfDHCPRelayRxPkts indicates the total number of packets received by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayRxMalformedPkts indicates the total number of malformed packets received by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of untrusted packets received by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of client packets discarded by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayClientPktsRelayed indicates the total number of client packets relayed by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of server packets discarded by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayServerPktsRelayed indicates the total number of server packets relayed by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of packets discarded because authentication was not successful.

OBJECT-TYPE

vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of packets for which authentication was successful.

OBJECT-TYPE

vRtrIfDHCPRelayClientPktsSnooped indicates the total number of client packets snooped by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayServerPktsSnooped indicates the total number of server packets snooped by the DHCP relay agent.

OBJECT-TYPE

vRtrIfDHCPRelayClientPktsProxRad indicates the total number of client packets proxied by the DHCP relay agent based on data received from a RADIUS server.

OBJECT-TYPE

vRtrIfDHCPRelayClientPktsProxLS indicates the total number of client packets proxied by the DHCP relay agent based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.

OBJECT-TYPE

vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP RELEASE messages spoofed by the DHCP relay agent to the DHCP server.

OBJECT-TYPE

vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP FORCERENEW messages spoofed by the DHCP relay agent to the DHCP clients.

OBJECT-TYPE

vRtrIfDHCPRelayClientPktsProxUDB indicates the total number of client packets proxied by the DHCP relay agent based on the local user database.

OBJECT-TYPE

The value of the object vRtrIfDHCPRelayClientPktsProxNq indicates the total number of client packets proxied by the DHCP relay agent based on data received from a Diameter NASREQ server.

OBJECT-TYPE

The value of the object vRtrIfDHCPRelayClientPktsStream indicates the total number of received client packets scheduled for streaming to an external server, by the DHCP proxy function.

OBJECT-IDENTITY

OBJECT-TYPE

The Client IP address from the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the client's IP address.

OBJECT-TYPE

The lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time.

OBJECT-TYPE

The value of the object vRtrDHCPClientLease indicates the lease time specified in the PDU causing the trap.

OBJECT-TYPE

The value of the object vRtrDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state.

OBJECT-TYPE

The value of the object vRtrDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state.

OBJECT-TYPE

The value of the object vRtrDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap.

OBJECT-TYPE

The value of the object vRtrDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap.

OBJECT-TYPE

The value of the object vRtrDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap.

OBJECT-TYPE

The value of the object vRtrDhcpRestoreLseStateVRtrId indicates the serviceId specified in the persistency record causing the trap.

OBJECT-TYPE

The value of the object vRtrDhcpRestoreLseStateIfIndex indicates the Port ID specified in the persistency record causing the trap.

OBJECT-TYPE

The value of the object vRtrDhcpRestoreLseStateProblem indicates why the persistency record cannot be restored.

OBJECT-TYPE

The value of the object vRtrDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system.

OBJECT-TYPE

The value of the object vRtrDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease state table with the information contained in the received DHCP ACK message.

OBJECT-TYPE

The value of vRtrBfdSlotNumber indicates the IOM slot number where the number of supported BFD sessions has reached the maximum value. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.

OBJECT-TYPE

The value of vRtrNumberOfBfdSessionsOnSlot indicates the current number of BFD sessions on the slot indicated by vRtrBfdSlotNumber. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.

OBJECT-TYPE

The value of vRtrBfdMaxSessionReason indicates the reason the maximum numbers of sessions on this IOM slot was reached. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.

OBJECT-TYPE

The value of the object vRtrDHCP6ServerNetAddrType indicates the address type of vRtrDHCP6ServerNetAddr.

OBJECT-TYPE

The value of the object vRtrDHCP6ServerNetAddr indicates the IP address of the DHCP server.

OBJECT-TYPE

The value of the object vRtrDHCP6ClientNetAddrType indicates the address type of vRtrDHCP6ClientNetAddr.

OBJECT-TYPE

The value of the object vRtrDHCP6ClientNetAddr indicates the IP address of the DHCP client.

OBJECT-TYPE

The value of the object vRtrDHCP6AssignedNetAddrType indicates the address type of vRtrDHCP6AssignedNetAddr.

OBJECT-TYPE

The value of the object vRtrDHCP6AssignedNetAddr indicates the IP address assigned to the DHCP client.

OBJECT-TYPE

The value of vRtrDHCP6AssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6AssignedNetAddr.

OBJECT-TYPE

The value of the object vRtrDHCP6OldAssignedNetAddrType indicates the address type of vRtrDHCP6OldAssignedNetAddr.

OBJECT-TYPE

The value of the object vRtrDHCP6OldAssignedNetAddr indicates the IP address formerly assigned to the DHCP client.

OBJECT-TYPE

The value of vRtrDHCP6OldAssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6OldAssignedNetAddr.

OBJECT-TYPE

The value of vRtrDHCP6NewClientId indicates the new DHCP6 clients unique identifier (DUID).

OBJECT-TYPE

The value of vRtrDHCP6OldClientId indicates the old DHCP6 clients unique identifier (DUID).

OBJECT-TYPE

The value of the object vRtrDHCP6LeaseOverrideResult indicates whether or not the lease state has been overridden.

OBJECT-TYPE

The value of the object vRtrInetStatRteCpeNotifyAddrType indicates the address type of vRtrInetStatRteCpeNotifyAddr.

OBJECT-TYPE

The value of the object vRtrInetStatRteCpeNotifyAddr indicates the IP address of the CPE.

OBJECT-TYPE

The value of the object vRtrInetStaticRouteCpeStatus indicates whether or not the CPE associated with a static route is 'reachable' or 'unreachable'.

OBJECT-TYPE

The value of vRtrManagedRouteInetAddrType indicates the address type of vRtrManagedRouteInetAddr.

OBJECT-TYPE

The value of vRtrManagedRouteInetAddr indicates the IP address of the managed route.

OBJECT-TYPE

The value of vRtrManagedRoutePrefixLen indicates the prefix length of the subnet associated with vRtrManagedRouteInetAddr.

OBJECT-TYPE

The value of the object vRtrFailureDescription is a printable character string which contains information about the reason why the notification is sent.

OBJECT-TYPE

The value of the object vRtrMaxRoutesType indicates the type of the maximum number of routes indicated by vRtrMaxNumRoutes

OBJECT-TYPE

The value of the object vRtrSlotOrCpmFlag indicates slot, when we have IOM based sessions and CPM when the sessions are centralized.

OBJECT-TYPE

The value of vRtrNotifInetAddrType indicates the address type of vRtrNotifInetAddr.

OBJECT-TYPE

The value of vRtrNotifInetAddr indicates an IP address.

OBJECT-TYPE

The value of the object vRtrIfBfdSessChangedProtocol indicates the protocol that changed the state in BFD.

OBJECT-TYPE

The value of the object vRtrIfBfdSessProtoChngdState indicates the changed state of vRtrIfBfdSessChangedProtocol in BFD.

OBJECT-TYPE

The value of vRtrIfDcpTimeEventOccured indicates the actual time the event was detected in the system which may differ from the time the event was collected by the logging infrastructure.

OBJECT-TYPE

The value of vRtrNotifTruthValue indicates a boolean value.

OBJECT-TYPE

The value of tmnxVRtrMaxNHRvplsARPEntries indicates the maximum number of Nexthop RVPLS ARP entries supported. This object is reported when the tmnxVRtrNHRvplsARPHighUsage, tmnxVRtrNHRvplsARPExhaust or tmnxVRtrNHRvplsARPHighUsageClr notification is generated.

OBJECT-TYPE

The value of vRtrNotifIgnorePortState indicates the system state to ignore non-operational port associated with the IP interface with the SAP.

OBJECT-TYPE

vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a virtual router interface in the system. The content of this table is moved to the TIMETRA-SERV-MIB::svcDhcpLeaseStateTable.

OBJECT-TYPE

DHCP lease state information for a virtual router interface.

OBJECT-TYPE

The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP address of the DHCP lease state.

OBJECT-TYPE

The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC address of the DHCP lease state.

OBJECT-TYPE

The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the remaining lease time of the IP address of the DHCP lease state.

OBJECT-TYPE

vRtrIfDHCPLseStateOption82 indicates the content of the Option82 for this DHCP lease state.

OBJECT-TYPE

The value of the object vRtrIfDHCPLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file.

OBJECT-TYPE

This table allows the user to configure IPv6 prefixes for router advertisements on an interface

OBJECT-TYPE

An entry in the vRtrAdvPrefixTable.

OBJECT-TYPE

The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.

OBJECT-TYPE

The ipv6 address prefix. The length of this object is the standard length (16 bytes ) for IPv6 prefixes.

OBJECT-TYPE

The prefix length associated with this prefix. The value 0 has no special meaning for this object.

OBJECT-TYPE

The row status used for creation and deletion of router advertisement prefix entries.

OBJECT-TYPE

This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.

OBJECT-TYPE

Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address.

OBJECT-TYPE

The remaining length of time in seconds that this prefix will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.

OBJECT-TYPE

The remaining length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.

OBJECT-TYPE

The table of addressing information relevant to this entity's Static Routing table.

OBJECT-TYPE

A particular route to a particular destination, through a particular next hop.

OBJECT-TYPE

The value of vRtrInetStaticRouteDestType indicates the address type of vRtrInetStaticRouteDest address.

OBJECT-TYPE

The value of vRtrInetStaticRouteDest indicates the destination IP address of this static route.

OBJECT-TYPE

The value of vRtrInetStaticRouteDestPfxLen indicates the prefix length associated with the vRtrInetStaticRouteDest address.

OBJECT-TYPE

The value of vRtrInetStaticRouteIndex indicates the fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.

OBJECT-TYPE

vRtrInetStaticRouteRowStatus controls the creation and deletion of rows in the table.

OBJECT-TYPE

The value of vRtrInetStaticRouteLastEnabledTime indicates the sysUpTime value when vRtrInetStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.

OBJECT-TYPE

The value of vRtrInetStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'

OBJECT-TYPE

The value of vRtrInetStaticRouteStaticType specifies the type of static route represented by this row entry. The values of vRtrInetStaticRouteNextHopType, vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName depends on the value of vRtrInetStaticRouteStaticType. For details please look at the following chart: vRtrInetStaticRouteStaticType unknown nexthop indirect blackHole grt --------------------------------------------------------------------- vRtrInetStaticRouteNextHopType unknown valid valid unknown unknown vRtrInetStaticRouteNextHop null valid valid null null vRtrInetStaticRouteNextHopIf null valid null null null vRtrInetStaticRouteNHTunnelName null valid null null null Though all the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be valid when the value of vRtrInetStaticRouteStaticType is 'nexthop', please note that at most only one of them can have a non null string.

OBJECT-TYPE

The value of vRtrInetStaticRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes

OBJECT-TYPE

The value of vRtrInetStaticRouteMetric specifies the metric for the static route. When ipCidrRouteProto has a value of 'netmgmt' to specify that this entry is a static route, the value of vRtrInetStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.

OBJECT-TYPE

The value of vRtrInetStaticRouteEgressIfIndex indicates the outgoing ifIndex for this route as computed by the static route module. This variable will have a value of 0 if vRtrInetStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.

OBJECT-TYPE

The value of vRtrInetStaticRouteNextHopType specifies the address type of vRtrInetStaticRouteNextHop address.

OBJECT-TYPE

The value of vRtrInetStaticRouteNextHop specifies the ip address of the next hop for the static route and it depends on the value of vRtrInetStaticRouteStaticType. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'unknown' or 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings.

OBJECT-TYPE

The value of vRtrInetStaticRouteNextHopIf specifies the name of the interface to be used for the next hop of this static route and it depends on the value of vRtrInetStaticRouteStaticType. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'unknown' or 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings.

OBJECT-TYPE

The value of vRtrInetStaticRouteAdminState specifies the desired administrative state for this virtual router static route

OBJECT-TYPE

The value of vRtrInetStaticRouteIgpShortcut specifies the Layer 2 tunneling mechanism used for IGP shortcuts. The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop. This object was replaced by vRtrInetSRIndirectTunnelLdp and vRtrInetSRIndirectTunnelRsvpTe objects in 13.0.

OBJECT-TYPE

The value of vRtrInetStaticRouteDisallowIgp specifies if IGP shortcuts are to be used or not. The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort. This object was replaced by vRtrInetSRIndirectTunnelDisalIgp object in 13.0.

OBJECT-TYPE

The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag that is used to add to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.

OBJECT-TYPE

The value of vRtrInetStaticRouteEnableBfd specifies whether or not Bi-directional Forwarding Detection is enabled on this static route. When the value is 'true', this static route can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD.

OBJECT-TYPE

The value of vRtrInetStaticRouteCpeAddrType specifies the address type of vRtrInetStaticRouteCpeAddr address. When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown', statistics for the Customer Provided Equipment (CPE) host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.

OBJECT-TYPE

The value of vRtrInetStaticRouteCpeAddr specifies the IP address of the target CPE device. When this object is configured, ICMP pings will be sent to this target IP address to determine CPE connectivity and whether this static route should be active. When the value of vRtrInetStaticRouteCpeAddr is non-empty, statistics for the CPE host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.

OBJECT-TYPE

The value of vRtrInetStaticRouteCpeInterval specifies the interval, in seconds, between ICMP pings to the target CPE IP address, vRtrInetStaticRouteCpeAddr.

OBJECT-TYPE

The value of vRtrInetStaticRouteCpeDropCnt specifies the number of consecutive ping replies that must be missed before concluding the CPE is down. If the CPE is determined to be down, the associated static route will be deactivated.

OBJECT-TYPE

The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable the logging of transitions between active and inactive based on the CPE connectivity check. A value of 'true (1)' indicates that logging should be enabled.

OBJECT-TYPE

The value of vRtrInetStaticRouteNHTunnelName specifies the name of the IPsec tunnel to be used for the nexthop of this static route and it depends on the value of vRtrInetStaticRouteStaticType. The value of vRtrInetStaticRouteNHTunnelName is valid only for static routes configured for a vprn service. An 'inconsistentValue' error is returned if an attempt is made to set this object for the base instance which can be identified by vRtrID value of '1'. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings.

OBJECT-TYPE

The value of vRtrInetStaticRoutePrefixListName specifies the name of a prefix list to match on. This value allows the existence of specified routes within the Route Table Manager (RTM) to trigger the addition of a static route in the RTM. If any of the routes specified in the vRtrInetStaticRoutePrefixListName exists in the RTM, then the associated static route should be added to the RTM.

OBJECT-TYPE

The value of vRtrInetStaticRoutePrefixListFlag specifies the routes to match on from vRtrInetStaticRoutePrefixListName. If 'all (1)' is specified, all of the routes specified in the vRtrInetStaticRoutePrefixListName should exist in the Route Table Manager (RTM) for the associated static route to be added in the RTM. If 'none (2)' is specified, none of the routes specified in the vRtrInetStaticRoutePrefixListName should exist in the RTM for the associated static route to be added in the RTM. The value of vRtrInetStaticRoutePrefixListFlag will be reset to the default value when vRtrInetStaticRoutePrefixListName is set to the default value.

OBJECT-TYPE

The value of vRtrInetStaticRouteLdpSync specifies whether the the LDP synchronization timer for this route on an interface, vRtrIfLdpSyncTimer, is enabled or not. If the value of vRtrInetStaticRouteLdpSync is 'true (1)', this static route would not enable the preferred route immediately after the interface to the next-hop comes up but would wait for the LDP adjacency on the link to come up and start the ldp sync timer, vRtrIfLdpSyncTimer. On timer expiration, routing will enable the static route. If the value of vRtrInetStaticRouteLdpSync is 'false (2)', vRtrIfLdpSyncTimer would not be applied to this static route.

OBJECT-TYPE

The value of vRtrInetStaticRouteFC specifies the forwarding class associated with the static route. This object can take one of the following eight values - 'be', 'l2', 'af', 'l1', 'h2', 'ef', 'h1' or 'nc'. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when vRtrInetStaticRouteStaticType is not set to either 'indirect' or 'nexthop'.

OBJECT-TYPE

The value of vRtrInetStaticRouteFCPriority specifies the priority to be assigned to the static routes. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when vRtrInetStaticRouteStaticType is not set to either 'indirect' or 'nexthop'.

OBJECT-TYPE

The value of vRtrInetStaticRouteCommunityVal specifies the community name that is used to add to the static route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of this route into other routers. A value of ''H indicates that the vRtrInetStaticRouteCommunityVal has not been set.

OBJECT-TYPE

The value of vRtrInetStaticRouteCreationOrig indicates the mechanism that created this static route.

OBJECT-TYPE

The value of vRtrInetStaticRouteDynamicBgp specifies whether to enable a static route to dynamically derive its next-hop from the best BGP route for the exact same IP prefix. A value of 'enabled (1)' indicates that a static route is enabled to dynamically derive its next-hop from the best BGP route for the exact same prefix.

OBJECT-TYPE

The value of vRtrInetStaticRouteDescription is a user provided description string for a static route. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.

OBJECT-TYPE

The value of vRtrInetStaticRoutePaddingSize specifies the padding size for the ICMP ping test packet of the cpe connectivity check. vRtrInetStaticRoutePaddingSize is valid if the value of vRtrInetStaticRouteCpeAddr is non-empty. This option applies to IPv4 and IPv6 static routes.

OBJECT-TYPE

The value of vRtrInetStaticRouteDynBgpNHType indicates the address type of vRtrInetStaticRouteDynBgpNH address. The value of vRtrInetStaticRouteDynBgpNHType is valid only when vRtrInetStaticRouteStaticType is set to 'blackHole' and if vRtrInetStaticRouteDynamicBgp is set to 'enabled'.

OBJECT-TYPE

The value of vRtrInetStaticRouteDynBgpNH indicates the ip address of the next hop for the static route and it depends on the value of vRtrInetStaticRouteStaticType. When the value of vRtrInetStaticRouteStaticType is 'blackHole' and the value of vRtrInetStaticRouteDynamicBgp is 'enabled' then the value of vRtrInetStaticRouteDynBgpNH is valid and dynamically derived from the best BGP route for the exact same prefix.

OBJECT-TYPE

The value of vRtrInetStaticRouteGenerateIcmp specifies if we should generate and send an ICMP message when a packet matches a static route with a black-hole next-hop. An 'inconsistentValue' error will be returned if an attempt is made to set vRtrInetStaticRouteGenerateIcmp when the value of vRtrInetStaticRouteStaticType is not set to 'blackHole(3)'.

OBJECT-TYPE

The value of vRtrInetStaticRouteValidateNH specifies whether or not to track the state of the next-hop in the IPV4 ARP Cache or the IPv6 Neighbor Cache. When vRtrInetStaticRouteValidateNH is set to 'true', the next-hop is checked for reachability in the IPV4 ARP Cache or the IPV6 Neighbor Cache. The object vRtrInetStaticRouteValidateNH is only supported for directly connected next-hops.

OBJECT-TYPE

The value of vRtrInetStaticRouteSrcClassIndex specifies the source-class for this static route. The value of 0 means no source-class.

OBJECT-TYPE

The value of vRtrInetStaticRouteDstClassIndex specifies the destination-class for this static route. The value of 0 means no destination-class.

OBJECT-TYPE

The value of vRtrInetStaticRouteHoldTimeLeft indicates the remaining time in seconds for static route to become active/up, if static route is being held down. A non-zero value indicates static route is being held down for this many seconds.

OBJECT-TYPE

The value of vRtrInetStaticRouteLoadBalWeight specifies the load-balancing-weight for all of the ECMP next-hops. The value of 0 means no load-balancing-weight.

OBJECT-TYPE

This entity's Static Route Index Table.

OBJECT-TYPE

The available index for the vRtrInetStaticRouteTable for every destination per virtual router.

OBJECT-TYPE

The value of vRtrInetStaticRouteAvailIndex indicates the available fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.

OBJECT-TYPE

Timestamp of the last change to the vRtrInetInstAggrTable either from adding a row or removing a row.

OBJECT-TYPE

The vRtrInetInstAggrTable is the list of configured virtual router aggregations and their operational status information. vRtrInetInstAggrTable specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.

OBJECT-TYPE

vRtrInetInstAggrEntry indicates an entry (conceptual row) in the vRtrInetInstAggrTable. Entries are created and destroyed by user.

OBJECT-TYPE

The value of vRtrInetAggrIpPrefixType indicates the IP address type of vRtrInetAggrIpPrefix.

OBJECT-TYPE

The value of vRtrInetAggrIpPrefixType indicates the IP address prefix to match for the aggregation.

OBJECT-TYPE

The value of vRtrInetAggrIpPrefixLen indicates the prefix length for vRtrInetAggrIpPrefix, to match for the aggregation.

OBJECT-TYPE

vRtrInetAggrRowStatus controls the creation and deletion of rows in the table.

OBJECT-TYPE

The value of vRtrInetAggrLastChanged indicates the time stamp of the last change to this row of vRtrInetInstAggrTable.

OBJECT-TYPE

The value of vRtrInetAggrSummaryOnly specifies if specific routes that make up aggregates are advertised or not. When vRtrInetAggrSummaryOnly has value of 'true(1)', only the aggregate is advertised, the more specific routes that make up the aggregate are not. When vRtrInetAggrSummaryOnly has value of 'false(2)', both the aggregate and more specific components are advertised.

OBJECT-TYPE

The value of vRtrInetAggrASSet specifies whether the aggregate route has AS-SET. When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When vRtrInetAggrASSet has value of 'false(2)', the AS-Path will contain no AS-SET and will be originated by the ESR.

OBJECT-TYPE

The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrInetAggrAggregatorAS4Byte.

OBJECT-TYPE

The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's IP address. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorIPAddr is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.

OBJECT-TYPE

The value of vRtrInetAggrOperState indicates the current operational status of the aggregation entry.

OBJECT-TYPE

The value of vRtrInetAggrAggregatorAS4Byte specifies the aggregator's Autonomous System Number (ASN). When vRtrInetAggrAggregatorAS4Byte is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS4Byte is not set, the aggregate routes ASN and Router-ID will be used for the aggregator path attributes.

OBJECT-TYPE

The value of vRtrInetAggrNextHopType specifies whether the aggregate route will be installed in the Forwarding Information Base (FIB) when the route is activated. When vRtrInetAggrNextHopType has a value of 'none', the aggregate route will not be installed in the FIB. When vRtrInetAggrNextHopType has a value of 'blackHole' and the aggregate route is active, it will be installed in the FIB with a black-hole next-hop and packets matching this route will be discarded. When vRtrInetAggrNextHopType has a value of 'indirect' and the aggregate route is active, it will be installed in the FIB with a indirect next-hop and packets matching this route will be forwarded to the resolved direct next-hop.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal specifies the community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal has not been set.

OBJECT-TYPE

The value of vRtrInetAggrIndirectAddrType specifies the address type of the indirect next-hop address.

OBJECT-TYPE

The value of vRtrInetAggrIndirectAddr specifies the address of the indirect next-hop address. An 'inconsistentValue' error will be returned if an attempt is made to set vRtrInetAggrIndirectAddr to ipv4 address when the value of vRtrInetAggrIpPrefix is not set to an ipv4 address or if an attempt is made to set vRtrInetAggrIndirectAddr to ipv6 address when the value of vRtrInetAggrIpPrefix is not set to an ipv6 address.

OBJECT-TYPE

The value of vRtrInetAggrGenerateIcmp specifies if we should generate and send an ICMP message when a packet matches an aggregate route with a black-hole next-hop. An 'inconsistentValue' error will be returned if an attempt is made to set vRtrInetAggrGenerateIcmp when the value of vRtrInetAggrNextHopType is not set to 'blackHole(1)'.

OBJECT-TYPE

The value of vRtrInetAggrDescription is a user provided description string for aggregate route. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal2 specifies the 2nd community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal2 has not been set. It is required to configure vRtrInetAggrCommunityVal before configuring vRtrInetAggrCommunityVal2.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal3 specifies the 3rd community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal3 has not been set. It is required to configure vRtrInetAggrCommunityVal2 before configuring vRtrInetAggrCommunityVal3.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal4 specifies the 4th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal4 has not been set. It is required to configure vRtrInetAggrCommunityVal3 before configuring vRtrInetAggrCommunityVal4.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal5 specifies the 5th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal5 has not been set. It is required to configure vRtrInetAggrCommunityVal4 before configuring vRtrInetAggrCommunityVal5.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal6 specifies the 6th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal6 has not been set. It is required to configure vRtrInetAggrCommunityVal5 before configuring vRtrInetAggrCommunityVal6.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal7 specifies the 7th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal7 has not been set. It is required to configure vRtrInetAggrCommunityVal6 before configuring vRtrInetAggrCommunityVal7.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal8 specifies the 8th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal8 has not been set. It is required to configure vRtrInetAggrCommunityVal7 before configuring vRtrInetAggrCommunityVal8.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal9 specifies the 9th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal9 has not been set. It is required to configure vRtrInetAggrCommunityVal8 before configuring vRtrInetAggrCommunityVal9.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal10 specifies the 10th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal10 has not been set. It is required to configure vRtrInetAggrCommunityVal9 before configuring vRtrInetAggrCommunityVal10.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal11 specifies the 11th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal11 has not been set. It is required to configure vRtrInetAggrCommunityVal10 before configuring vRtrInetAggrCommunityVal11.

OBJECT-TYPE

The value of vRtrInetAggrCommunityVal12 specifies the 12th community name that is used to add to the aggregate route. This value could then be used in route policies to control the distribution of the route into other protocols and by BGP to control the distribution of the route into other routers. A value of ''H indicates that the vRtrInetAggrCommunityVal12 has not been set. It is required to configure vRtrInetAggrCommunityVal11 before configuring vRtrInetAggrCommunityVal12.

OBJECT-TYPE

This object is a bit-mask, with the following bits: If the 'vRtrInetAggrValidLocalPref' bit is set, the value in the 'vRtrInetAggrLocalPreference' object is valid to use.

OBJECT-TYPE

The value of vRtrInetAggrLocalPreference specifies the local preference value for this aggregate route. This value is valid to use only if the 'vRtrInetAggrValidLocalPref' bit is set in the 'vRtrInetAggrFlags' object.

OBJECT-TYPE

When this optional flag is configured, in both the VPRN and GRT instance, the aggregate is advertised with only the configured BGP community set. None of the communities from the component routes activating the aggregate are included. If no communities are configured as part of the aggregate commands then no new communities are added to the aggregate aggregate.

OBJECT-TYPE

The vRtrInetSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address range assigned to it.

OBJECT-TYPE

Each row entry represents an IP address range assigned a virtual router service interface. Setting RowStatus to 'active' requires values for all column variables to have been assigned.

OBJECT-TYPE

The value of vRtrInetSvcIpRangeAddrType indicates the IP address type of vRtrInetSvcIpRangeAddr.

OBJECT-TYPE

The value of vRtrInetSvcIpRangeAddr indicates the IP address service range assigned to a router's service interface. The address type of vRtrInetSvcIpRangeAddr is indicated by vRtrInetSvcIpRangeAddrType.

OBJECT-TYPE

The value of vRtrInetSvcIpRangePfxLen specifies the prefix length to be used with vRtrInetSvcIpRangeAddr for determining the IP address range.

OBJECT-TYPE

The value of vRtrInetSvcIpRangeRowStatus is used for creation and deletion of IP service prefix ranges.

OBJECT-TYPE

The value of vRtrInetSvcIpRangeExclusive specifies how the set of addresses specified by this entry are interpreted. When the value is 'true', they are reserved for services only and cannot be assigned to network ports. When the value is 'false', it could be used for services as well as network ports.

OBJECT-TYPE

The vRtrIpNetToPhysicalTable provides an extension of the ipNetToPhysicalTable in the IP-MIB.

OBJECT-TYPE

Each row entry in the vRtrIpNetToPhysicalTable represents additional columns for attributes specific to the Nokia SROS series implementation for the vRtrIpNetToPhysicalTable.

OBJECT-TYPE

The value of vRtrIpNetToPhysicalTimer indicates how much longer an ARP entry associated with an vRtrIpNetToPhysicalTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToPhysicalTimer has a value of zero, '0', the entry is cleared from the cache.

OBJECT-TYPE

The value of vRtrIpNetToPhysicalOperState indicates if the ARP entry is being used actively in the ARP Table. When ipNetToPhysicalType has a value 'dynamic', vRtrIpNetToPhysicalOperState will never have a value of 'outOfService'.

OBJECT-TYPE

The value of vRtrIpNetToPhysicalIsRouter indicates whether this ipNetToPhysicalEntry is a router.

OBJECT-TYPE

The value of vRtrIpNetToPhysicalMTU indicates the MTU of the link attached to this ipNetToPhysicalEntry.

OBJECT-TYPE

The value of vRtrIpNetToPhysicalPort indicates the ID of the port on which this entry was learned.

OBJECT-TYPE

The value of vRtrIpNetToPhysicalEncap indicates the encap value of the SAP this entry was learned on. If this entry was learned on a network port or null-encap SAP, the value of this object will be zero.

OBJECT-TYPE

The value of vRtrIpNetToPhysicalSecureNd indicates whether the physical address is received via Secured Neighbor Discovery messages.

OBJECT-TYPE

The vRtrInetCidrRouteTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB.

OBJECT-TYPE

Each row entry in the vRtrInetCidrRouteTable represents additional columns for attributes specific to the Nokia SROS series implementation for the IP route table.

OBJECT-TYPE

The vRtrInetCidrRouteLastEnabledTime variable indicates the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry.

OBJECT-TYPE

The value of vRtrInetCidrRoutePreference indicates the priority of this static route versus the routes from different sources such as BGP or OSPF etc, when ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes

OBJECT-TYPE

The value of vRtrInetCidrRouteMetric indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.

OBJECT-TYPE

The value of vRtrInetCidrRouteIfVRtrId indicates the virtual router instance of the egress interface defined by inetCidrRouteIfIndex. This object is valid only for subscriber management routes. For all other route types, this object will have a value of zero.

OBJECT-TYPE

The value of vRtrInetCidrRouteTunnEndpntInfo indicates tunnel endpoint information. The first 4 bytes indicate number of tunnel end-points, the next 4 bytes indicate IGP cost to reach tunnel end-points and the next 64 bytes indicate up to 16 4-byte IPv4 addresses (the number of end-points represented by bytes 1-4 indicate how many addresses are present). When no tunnel endpoints exist, the size of this object will be 0. When at least one tunnel endpoint exists, there would be 12 bytes to represent the information related to one tunnel endpoint.

OBJECT-TYPE

The value of vRtrInetCidrProtocolInstance indicates the instance of the protocol through which this route was learned. A single instance protocol will always return an instance value 0.

OBJECT-TYPE

The value of vRtrInetCidrRouteNextHopType indicates the type of next hop for this route.

OBJECT-TYPE

The value of vRtrInetCidrRouteNextHopOwner indicates the owner of next hop for this route.

OBJECT-TYPE

The value of vRtrInetCidrRouteNHOwnerAuxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetCidrRouteNextHopOwner. The value of vRtrInetCidrRouteNHOwnerAuxInfo indicates the number of tunnel ids existing for this next hop type and owner.

OBJECT-TYPE

The value of vRtrInetCidrRouteNHFC indicates the forwarding class or the sub forwarding class associated with the CIDR route. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name].

OBJECT-TYPE

The value of vRtrInetCidrRouteNHPriority indicates the priority to be assigned to the CIDR routes.

OBJECT-TYPE

The value of vRtrInetCidrRouteBkupFlags indicates the presence or absence of LFA next-hops and backup routes. 'none' indicates that no next-hop is present. 'hasLfa' indicates that an LFA next-hop is present in addition to the regular next-hop. 'hasBackup' indicates that this route has a backup route. 'isBackup' indicates that this route is a backup route to another route with the same prefix. 'isBgpInactive' indicates that this route is an inactive best-external route exported from BGP.

OBJECT-TYPE

The value of vRtrInetCidrRouteBkupNextHopType indicates the IP address type of vRtrInetCidrRouteBkupNextHop. The value of vRtrInetCidrRouteBkupNextHopType is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'.

OBJECT-TYPE

The value of vRtrInetCidrRouteBkupNextHop indicates the IP address of a backup next-hop. The value of vRtrInetCidrRouteBkupNextHop is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'.

OBJECT-TYPE

The value of vRtrInetCidrRouteBkupMetric indicates the routing metric for a backup route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. The value of vRtrInetCidrRouteBkupMetric is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'.

OBJECT-TYPE

The value of vRtrInetCidrRouteNextHopRepCount indicates the number of times the next-hop repeats for a particular route.

OBJECT-TYPE

The value of vRtrInetCidrRouteBkupNHType indicates the type of next hop for this backup route.

OBJECT-TYPE

The value of vRtrInetCidrRouteBkupNHOwner indicates the owner of next hop for this backup route.

OBJECT-TYPE

The value of vRtrInetCidrRouteBkupNHOwnAxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetCidrRouteBkupNHOwner. The value of vRtrInetCidrRouteBkupNHOwnAxInfo indicates the tunnel id existing for this backup next hop type and owner.

OBJECT-TYPE

The value of vRtrInetCidrRouteSrcClassIndex indicates the source-class for this CIDR route.

OBJECT-TYPE

The value of vRtrInetCidrRouteDstClassIndex indicates the destination-class for this CIDR route.

OBJECT-TYPE

The value of vRtrInetCidrRouteOperFlags indicates the status of different properties of this route. If the 'stickyFlag' bit is set, then it indicates ECMP sticky flag is set on this route.

OBJECT-TYPE

The value of vRtrInetCidrRouteNextHopWeight indicates the weight given to traffic this particular next-hop among the ECMP set of next-hops. The range of vRtrInetCidrRouteNextHopWeight is between 0 and maximum value of vRtrEcmpMaxRoutes. A value of 0 implies that weighted ECMP is not being used in the ECMP set of next-hops and this next-hop will be used equally with other next-hops for ECMP.

OBJECT-TYPE

The value of vRtrInetCidrRouteNextHopOwnInst indicates the instance of the next hop owner as indicated by vRtrInetCidrRouteNextHopOwner.

OBJECT-TYPE

The value of vRtrInetCidrRouteBkupNHOwnInst indicates the instance of the back up next hop owner as indicated by vRtrInetCidrRouteBkupNHOwner.

OBJECT-TYPE

When the value of vRtrInetCidrRouteNHIsFec is 'true', it indicates inetCidrRouteNextHop is a LDP FEC prefix. This is possible only with routes that resolve over LDP FECs. If 'true' then vRtrInetCidrRouteNHFecPfxLen has the prefix-length to be used with inetCidrRouteNextHop.

OBJECT-TYPE

The value of 'vRtrInetCidrRouteNHFecPfxLen' indicates the prefix length of the LDP FEC that resolves the route. This is valid only if vRtrInetCidrRouteNHIsFec is 'true', and when valid, this should be used in conjunction with inetCidrRouteNextHop to identify the LDP FEC that that resolves the route.

OBJECT-TYPE

The vRtrIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router instance.

OBJECT-TYPE

Each row entry represents the ICMP statistics of a virtual router instance. Entries are created and deleted when entries in the vRtrConfEntry are created and deleted.

OBJECT-TYPE

The value of vRtrIcmp6InMsgs indicates the total number of ICMP messages received by this router instance which includes all those counted by vRtrIcmp6InErrors.

OBJECT-TYPE

The value of vRtrIcmp6InErrors indicates the number of ICMP messages which this router instance received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).

OBJECT-TYPE

The value of vRtrIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InRedirects indicates number of ICMP Redirect messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutMsgs indicates the total number of ICMP messages which this router instance attempted to send. Note that this counter includes all those counted by icmpOutErrors.

OBJECT-TYPE

The value of vRtrIcmp6OutErrors indicates the number of ICMP messages which this router instance did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtr IPv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.

OBJECT-TYPE

The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this router instance.

OBJECT-TYPE

The value of vRtrIcmp6OutDiscards indicates the number of ICMP outgoing packets that were dropped by this router instance.

OBJECT-TYPE

The vRtrIfIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router interface.

OBJECT-TYPE

Each row entry represents the ICMP statistics of a virtual router interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.

OBJECT-TYPE

The value of vRtrIfIcmp6InMsgs indicates the total number of ICMP messages received by this interface which includes all those counted by vRtrIfIcmp6InErrors. Note that this interface is the interface to which the ICMP messages were addressed which may not be necessarily the input interface for the messages.

OBJECT-TYPE

The value of vRtrIfIcmp6InErrors indicates the number of ICMP messages which this interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).

OBJECT-TYPE

The value of vRtrIfIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InRedirects indicates number of ICMP Redirect messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP messages which this interface attempted to send. Note that this counter includes all those counted by icmpOutErrors.

OBJECT-TYPE

The value of vRtrIfIcmp6OutErrors indicates the number of ICMP messages which this interface did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtr IPv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.

OBJECT-TYPE

The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system time when the last router solicitation message was sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutRtrAdvTime indicates the system time when the last router advertisement message was sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system time when the last neighbor solicitation message was sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutNbrAdvTime indicates the system time when the last neighbor advertisement message was sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this interface.

OBJECT-TYPE

The value of vRtrIfIcmp6OutDiscards indicates the number of ICMP outgoing packets that were dropped on this interface.

OBJECT-TYPE

The vRtrIfBfdTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry with the same indices. The vRtrIfBfdTable is obsoleted and replaced with vRtrIfBfdExtTable in 9.0 Release.

OBJECT-TYPE

Each row entry represents the BFD configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted. The vRtrIfBfdEntry is obsoleted and replaced with vRtrIfBfdExtEntry in 9.0 Release.

OBJECT-TYPE

The value of vRtrIfBfdAdminState specifies the admin state of BFD on this interface. When it is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot. The vRtrIfBfdAdminState object is obsoleted and replaced with vRtrIfBfdExtAdminState object in 9.0 Release.

OBJECT-TYPE

The value of vRtrIfBfdTransmitInterval specifies the BFD transmit interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds. The vRtrIfBfdTransmitInterval object is obsoleted and replaced with vRtrIfBfdExtTransmitInterval object in 9.0 Release.

OBJECT-TYPE

The value of vRtrIfBfdReceiveInterval specifies the BFD receive interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds. The vRtrIfBfdReceiveInterval object is obsoleted and replaced with vRtrIfBfdExtReceiveInterval object in 9.0 Release.

OBJECT-TYPE

The value of vRtrIfBfdMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault. The vRtrIfBfdMultiplier object is obsoleted and replaced with vRtrIfBfdExtMultiplier object in 9.0 Release.

OBJECT-TYPE

The value of vRtrIfBfdEchoInterval specifies the BFD echo interval over this interface. The vRtrIfBfdEchoInterval object is obsoleted and replaced with vRtrIfBfdExtEchoInterval object in 9.0 Release.

OBJECT-TYPE

The value of vRtrIfBfdType specifies the configured termination of a BFD session on this interface. 'cpmNp(1)' specifies termination on the CPM card's Network Processor. 'auto(2)' specifies a system-selected termination other than the CPM Network Processor. The vRtrIfBfdType object is obsoleted and replaced with vRtrIfBfdExtType object in 9.0 Release.

OBJECT-TYPE

The vRtrIfBfdSessionTable table contains per BFD session statistics and operational settings.

OBJECT-TYPE

Each row entry represents a BFD session. Entries are created automatically by the system, or when a static route is configured to use BFD.

OBJECT-TYPE

The value of vRtrIfBfdSessionLclAddrType indicates the address type in vRtrIfBfdSessionLclAddr.

OBJECT-TYPE

The value of vRtrIfBfdSessionLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionLclAddrType.

OBJECT-TYPE

The value of vRtrIfBfdSessionRemAddrType indicates the address type in vRtrIfBfdSessionRemAddr.

OBJECT-TYPE

The value of vRtrIfBfdSessionRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionRemAddrType.

OBJECT-TYPE

The value of vRtrIfBfdSessionOperState indicates the operational state of BFD on this interface.

OBJECT-TYPE

The value of vRtrIfBfdSessionState indicates the state of the BFD protocol on this interface.

OBJECT-TYPE

The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD session is not up.

OBJECT-TYPE

The value of vRtrIfBfdSessionMesgRecv indicates the number of messages received in this session. This object is applicable if vRtrIfBfdSessionType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned.

OBJECT-TYPE

The value of vRtrIfBfdSessionMesgSent indicates the number of messages sent in this session. This object is applicable if vRtrIfBfdSessionType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned.

OBJECT-TYPE

The value of vRtrIfBfdSessionLastDownTime indicates the system time when this session last went down.

OBJECT-TYPE

The value of vRtrIfBfdSessionLastUpTime indicates the system time when this session last came up.

OBJECT-TYPE

The value of vRtrIfBfdSessionUpCount indicates the number of times vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'.

OBJECT-TYPE

The value of vRtrIfBfdSessionDownCount indicates the number of times vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'.

OBJECT-TYPE

The value of vRtrIfBfdSessionLclDisc indicates the unique local discriminator for this session.

OBJECT-TYPE

The value of vRtrIfBfdSessionRemDisc indicates the remote discriminator for this session.

OBJECT-TYPE

The value of vRtrIfBfdSessionProtocols indicates which protocols are using this BFD session.

OBJECT-TYPE

The value of vRtrIfBfdSessionTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdExtTransmitInterval' and the remote node's receive interval.

OBJECT-TYPE

The value of vRtrIfBfdSessionRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdExtReceiveInterval' and the remote node's transmit interval.

OBJECT-TYPE

The value of vRtrIfBfdSessionType indicates the termination of the BFD session, as follows: 'iom (1)' - termination on the IOM card main processor, 'cpm (2)' - termination on the CPM card main processor, 'cpmNp (3)' - termination on the CPM card Network Processor.

OBJECT-TYPE

The value of vRtrIfBfdSessionVerMismatch indicates the number of version mismatch errors for the bfd session.

OBJECT-TYPE

The value of vRtrIfBfdSessionTimeSinceLastRx indicates the number of milliseconds elapsed since the most recent message was received on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessionType equal to 'cpmNp(3)'. Otherwise, zero is returned.

OBJECT-TYPE

The value of vRtrIfBfdSessionTimeSinceLastTx indicates the number of milliseconds elapsed since the most recent message was transmitted on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessionType equal to 'cpmNp(3)'. Otherwise, zero is returned.

OBJECT-TYPE

The value of the object vRtrIfDHCP6TableLastChanged indicates the time of the last change to any row of vRtrIfDHCP6Table

OBJECT-TYPE

The vRtrIfDHCP6Table is used to configure the interface parameters for DHCP6.

OBJECT-TYPE

Each row entry represents information related to DHCP6 for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The value of the object vRtrIfDHCP6LastChanged indicates the time of the last change to this row of VRtrIfDHCP6Entry.

OBJECT-TYPE

The value of the object vRtrIfDHCP6AdminState specifies the desired administrative status of the DHCP6 relay agent on this interface. The value can only be set to inService if the value of vRtrIfType is serviceIesGroup. The value noop(3) is never allowed.

OBJECT-TYPE

The value of the object vRtrIfDHCP6OperState indicates the current operational state of the DHCP6 relay agent on this interface. Following value are possible: up (1) - the DHCP6 relay agent is running. down (2), - the DHCP6 relay agent is administratively disabled. noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as no ipv6 prefix is assigned to this link. noServerConfigured(4) - the DHCP6 relay agent cannot be operational as no DHCP6 servers are configured. noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational because a source address has been configured and the address is not local to this node.

OBJECT-TYPE

The value of the object vRtrIfDHCP6Description specifies a user provided description string for DHCP6 relay agent on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayServer1 specifies the first DHCP6 server where the DHCP6 requests will be forwarded to.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd DHCP6 server where the DHCP6 requests will be forwarded to.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd DHCP6 server where the DHCP6 requests will be forwarded to.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd DHCP6 server where the DHCP6 requests will be forwarded to.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th DHCP6 server where the DHCP6 requests will be forwarded to.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th DHCP6 server where the DHCP6 requests will be forwarded to.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th DHCP6 server where the DHCP6 requests will be forwarded to.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th DHCP6 server where the DHCP6 requests will be forwarded to.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether or not the interface-id option is added by the DHCP6 relay agent, and, if it is present, what information goes in it. If the value of this object is set to 'none', the option is not added by the relay agent. In all other cases the option is added to the relay message. The content of the option is defined as follows: - 'ifIndex' - the value of the interface index is used. - 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') - 'sapId' - the ASCII-encoded SAP-id is used. - 'string' - the value of the object vRtrIfDHCP6ItfIdString is used. If the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' or 'serviceVprnGroup(9)', the value of the object vRtrIfDHCP6RelayItfIdOption may also be included in the RADIUS authentication request sent by the DHCPv6 proxy server.

OBJECT-TYPE

The value of the object vRtrIfDHCP6LeasePopulate specifies the maximum number of lease states allocated by the DHCP6 relay function, allowed on this interface.

OBJECT-TYPE

The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the number of lease states currently allocated on this interface by the DHCP6 relay function.

OBJECT-TYPE

The value of the object vRtrIfDHCP6SourceAddress specifies the IPv6 address that will be used by the DHCP6 relay agent as source IP address in all messages sent to the DHCP6 servers. If set to ::, the system will use the IPv6 address assigned on the link on which the relay message is sent out, if such an address is defined. As a last resort the system IPv6 address is taken.

OBJECT-TYPE

The value of the object vRtrIfDHCP6EnableNgbrResolution specifies whether or not neighbor resolution via DHCP6 Relay must be enabled on this interface. This feature is similar to the arp-populate feature in ipv4.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RemoteIdOption specifies whether or not the remote Id option is sent to the DHCP6 server. The client DUID is used as remoteId. If the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' or 'serviceVprnGroup(9)', the value of the object vRtrIfDHCP6RemoteIdOption may also be included in the RADIUS authentication request sent by the DHCPv6 proxy server.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxdAdminState specifies the administrative state of the row. If set to enabled, this IPv6 prefix will be delegated by the system.

OBJECT-TYPE

The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies the maximum number of lease states installed by the DHCP6 server function allowed on this interface.

OBJECT-TYPE

The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the number of lease states currently allocated on this interface by the DHCP6 server function.

OBJECT-TYPE

The value of the object vRtrIfDHCP6ItfIdString specifies the string that will be put in the interface-id option added by the relay agent. This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption is set to string(4).

OBJECT-TYPE

The value of vRtrIfDHCP6ProxyAdminState specifies the desired administrative state of the IPv6 Router Advertisements.

OBJECT-TYPE

The value of vRtrIfDHCP6ProxyRenewTimer specifies the renew-timer (T1). The time at which the client contacts the server from which the addresses in the IA_NA or IA_PD were obtained to extend the lifetimes of the addresses or prefixes assigned to the client.

OBJECT-TYPE

The value of vRtrIfDHCP6ProxyRebindTimer specifies the rebind-timer (T2). The time at which the client contacts any available server to extend the lifetimes of the addresses or prefixes assigned to the client.

OBJECT-TYPE

The value of vRtrIfDHCP6ProxyValidLifetime specifies the valid lifetime for the IPv6 prefix or address in the option. A value of 0xFFFFFFFF represents infinity.

OBJECT-TYPE

The value of vRtrIfDHCP6ProxyPrefLifetime specifies the preferred lifetime for the IPv6 prefix or address in the option. When preferred lifetime expires, then any derived addresses are deprecated. A value of 0xFFFFFFFF represents infinity.

OBJECT-TYPE

The value of vRtrIfDHCP6ProxyApplications specifies the set of client applications that can make use of the DHCP proxy functionality on this interface.

OBJECT-TYPE

The value of vRtrIfDHCP6UserDb specifies the local user database to authenticate against. If no authentication with the local user database is required, the value of this object must be set to the empty string.

OBJECT-TYPE

The value of vRtrIfDHCP6LocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.

OBJECT-TYPE

The value of vRtrIfDHCP6RelayApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface. This object can only be set when the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' 'serviceVprnGroup(9)', or for retailer subscriber interfaces. Unless on a subscriber interface, the object cannot be set to all zero, i.e. at least one application must be specified.

OBJECT-TYPE

The value of the object vRtrIfDHCP6LinkAddress specifies the ipv6 address that will be used by the DHCP6 relay agent as link address in all messages sent to the DHCP6 servers. If set to ::, the system determines the link address based on the group interface configuration. This object can only be set when vRtrIfType is either 'serviceIesGroup(7)' or 'serviceVprnGroup(9)'.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RoutePopulatePd specifies whether or not route-population PD via DHCP6 Relay must be enabled on this interface.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RoutePopulateNa specifies whether or not route-population NA via DHCP6 Relay must be enabled on this interface.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RoutePopulateTa specifies whether or not route-population TA via DHCP6 Relay must be enabled on this interface.

OBJECT-TYPE

The value of the object vRtrIfDHCP6RoutePopulateExcl specifies whether or not black-hole routers should be populated based on the prefix exclude option (as per RFC 6603). Only applicable when vRtrIfDHCP6RoutePopulatePd is set to true (1).

OBJECT-TYPE

The value vRtrIfDHCP6PythonPolicy specifies the name of the Python policy used on this interface. The Python policy referenced here needs to exist in the TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable.

OBJECT-TYPE

The value of vRtrIfDHCP6FilterId specifies the DHCP6 filter to apply. If no filtering is required, then a value of zero (0) must be set.

OBJECT-TYPE

The value of vRtrIfDHCP6SnpgAdminState specifies the desired administrative state of the DHCP6 Snooping.

OBJECT-TYPE

This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex).

OBJECT-TYPE

Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.

OBJECT-TYPE

The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to.

OBJECT-TYPE

The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex.

OBJECT-TYPE

The vRtrIfProxyNDTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.

OBJECT-TYPE

Each row entry represents information related to Proxy Neighbor Discovery for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

If the value of vRtrIfProxyNDLocal is set to 'true', local proxy Neighbor Discovery is enabled, that is, the interface will reply to Neighbor Solicitation requests when both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyNDLocal is set to 'false', the interface will not reply to Neighbor Solicitation requests if both the hosts are on the same subnet.

OBJECT-TYPE

The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.

OBJECT-TYPE

The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.

OBJECT-TYPE

The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.

OBJECT-TYPE

The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.

OBJECT-TYPE

The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates the Timestamp of the last change to any row the vRtrIfDHCP6PfxDelegationTable

OBJECT-TYPE

The table vRtrIfDHCP6PfxDelegationTable is used to configure the feature of automated delegation of IPv6 prefixes using DHCP6. This feature is intended for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the topology of the links in the network to which the prefixes will be assigned.

OBJECT-TYPE

Each row entry represents a delegated IPv6 prefix. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing the vRtrRowStatus.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxdPrefix specifies, together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6 prefix that will be delegated.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxdPrefixLen specifies, together with the object vRtrIfDHCP6PfxdPrefix the ipv6 prefix that will be delegated by this system.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxdRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The only allowed values for this object are: active(1), createAndGo(4), and destroy(6).

OBJECT-TYPE

The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime when any object of the row is last changed.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxdDUID specifies the ID of the requesting router. If set to a non zero value the prefix defined in this row will only be delegated to this router. If set to zero, the prefix will be delegated to any requesting router.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxdIAID specifies the IAID from the requesting router that needs to match in order to delegate the prefix defined in this row.If set to 0 no match on the received IAID is done.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies the time in seconds that this prefix remains preferred. The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then the value of vRtrIfDHCP6PfxdValidLifetime. The value 4294967295 is considered equal to infinity.

OBJECT-TYPE

The value of the object vRtrIfDHCP6PfxdValidLifetime specifies the time in seconds that the prefix is valid. The value 4294967295 is considered equal to infinity.

OBJECT-TYPE

The vRtrDHCP6DropStatTable has an entry for each virtual router configured in the system.

OBJECT-TYPE

Each row entry represents a collection of DHCP6 drop reason statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The object vRtrDHCP6DropStatReason indicates the drop reason for which the object vRtrDHCP6DropStatPktsDropped contains the counter. none srcOperDown Dhcp6 oper state is not Up on src itf dstOperDown Dhcp6 oper state is not Up on dst itf rlyReplyOnClientItf Relay Reply Msg on Client Itf hopCount Hop Count Limit reached badRelayedMsg Missing Relay Msg option, or illegal msg type clientItfNotFound Unable to determine destination client Itf noMemory Out of Memory noGlobalPfx No global Pfx on Client Itf noSrcIp Unable to determine src Ip Addr noRteToServer No route to server subMgmtUpdFail Subscr. Mgmt. Update failed relayForw Received Relay Forw Message msgTooSmall Packet too small to contain valid dhcp6 msg msgNotForServer Server cannot respond to this message noServerId No Server Id option in msg from server noClientId No Client Id option in msg from client serverIdInClientMsg Server Id option in client msg wrongServerId Server DUID in client msg does not match ours illegalUnicast Client sent message to unicast while not allowed illegalSrcIp Client sent message with illegal src Ip pdMsgNotSupported Client message type not supported in pfx delegation nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed maximum in msg clientMacNotResolved Unable to resolve client's mac address illegalAssignedAddr The client was assigned an illegal address msgEncodingError Illegal pfx length in a IA_PREFIX option rcoMsgNotSupported Client message type not supported on rco interfaces iaInInfoRequest Info request holds IA options noIaInClientMsg Client msg holds no IA options noAddrInConfirmMsg No addresses in client confirm msg noRelayServers No relay servers configured hostLockout Blocked by host lockout noLinkAddress No link address available droppedByPython Either explicit or because of a Python failure invalidForcedServer The forced server configured in the local user database is not configured on the interface. rcvOnSrrpBackupItf Packet ignored on SRRP backup interface dhcpTransactNotFound A DHCP transaction is not found retailItfNotFound Retail interface is not found dropByDhcpFilter Packet dropped by DHCP filter authenticationFailed The packet was rejected by authentication invalidForcedSrc Forced source not configured on VRF

OBJECT-TYPE

The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.

OBJECT-TYPE

The value of vRtrDHCP6DropStatPktsDropped indicates the number of DHCP6 packets were dropped for the reason described in vRtrDHCP6DropStatReason.

OBJECT-TYPE

The vRtrDHCP6MsgStatTable has an entry for each virtual router configured in the system.

OBJECT-TYPE

Each row entry represents a collection of counters for each DHCP6 message type for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type for which statistics are kept on a per vrtr basis.

OBJECT-TYPE

The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.

OBJECT-TYPE

The value of vRtrDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.

OBJECT-TYPE

The value of vRtrDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.

OBJECT-TYPE

The value of vRtrDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.

OBJECT-TYPE

The vRtrIfIpcpTable table contains the configuration for IPCP interface configuration on the vRtrIfEntry with the same indices.

OBJECT-TYPE

Each row entry represents the IPCP configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.

OBJECT-TYPE

The value of vRtrIfIpcpPeerAddrType specifies the type of vRtrIfIpcpPeerAddr, the remote peer's IP address. vRtrIfIpcpPeerAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPeerAddrType is unknown, the value of vRtrIfIpcpPeerAddr is assumed to be of size 0.

OBJECT-TYPE

The value of vRtrIfIpcpPeerAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. The type of this address is specified by the value of vRtrIfIpcpPeerAddrType vRtrIfIpcpPeerAddr can be set to on-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)

OBJECT-TYPE

The value of vRtrIfIpcpPriDnsAddrType specifies the type of vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. vRtrIfIpcpPriDnsAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of vRtrIfIpcpPriDnsAddr is assumed to be of size 0.

OBJECT-TYPE

The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpPriDnsAddrType vRtrIfIpcpPriDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)

OBJECT-TYPE

The value of vRtrIfIpcpSecDnsAddrType specifies the type of vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. vRtrIfIpcpSecDnsAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of vRtrIfIpcpSecDnsAddr is assumed to be of size 0.

OBJECT-TYPE

The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpSecDnsAddrType. vRtrIfIpcpSecDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)

OBJECT-TYPE

The vRtrInetStatRteCpeChkStatsTable has an entry for each entry in the vRtrInetStaticRouteTable that has a non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects.

OBJECT-TYPE

Each row entry represents a collection of Customer Provided Equipment (CPE) availability statistics for a virtual router static route in the system with non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The value of vRtrInetStatRteCpeChkUpTime indicates how long (in centiseconds) that the CPE has been available.

OBJECT-TYPE

The value of vRtrInetStatRteCpeChkInPktCnt indicates the number of echo reply packets received.

OBJECT-TYPE

The value of vRtrInetStatRteCpeChkOutPktCnt indicates the number of echo request packets sent.

OBJECT-TYPE

The value of vRtrInetStatRteCpeChkDownTrans indicates the number of times the CPE has transitioned to the unavailable state.

OBJECT-TYPE

The value of vRtrInetStatRteCpeChkUpTrans indicates the number of times the CPE has transitioned to the available state.

OBJECT-TYPE

The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds, before the CPE will be declared down. Upon receipt of an echo reply, it has the value of vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is decremented by 1 every second.

OBJECT-TYPE

The value of tmnxDscpAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The tmnxDscpAppTable has an entry for each application to Differential Services Code Point (DSCP) mapping in a virtual routing context on this system.

OBJECT-TYPE

Each row represents a mapping from an application to a DSCP value for particular virtual routing context. Entries are created at system initialization.

OBJECT-TYPE

The value of tmnxDscpAppId indicates the DSCP application identifier for a protocol on the Nokia SROS router which generates control traffic over IP. The values of 'ptp (29)' and 'igmp-reporter (30)' are applicable to the Base router context only (vRtrID = 1). The values of 'cflowd (2)' and 'sflowd (34)' are applicable to the Base router (vRtrID = 1) and Management router (vRtrID = 4095) contexts only.

OBJECT-TYPE

The value of tmnxDscpAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of tmnxDscpAppDscpValue specifies a DSCP Value to assign to the traffic generated by the application specified by tmnxDscpAppId. A value of -1 specifies that no explicit DSCP re-marking will be done for the traffic generated by the application specified by tmnxDscpAppId. The default value is protocol specific.

OBJECT-TYPE

The value of tmnxDscpFCTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpFCTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The tmnxDscpFCTable has an entry for each mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in a virtual routing context on this system.

OBJECT-TYPE

Each row represents a mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in particular virtual routing context. Entries are created at system initialization.

OBJECT-TYPE

The value of tmnxDscpFCDscpValue specifies a DSCP value which will be mapped to the Forwarding Class specified by tmnxDscpFCValue.

OBJECT-TYPE

The value of tmnxDscpFCLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of tmnxDscpFCValue specifies the Forwarding Class value for this mapping entry. The default value is best effort, which is specified by a value of 0.

OBJECT-TYPE

The value of tmnxDot1pAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDot1pAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The tmnxDot1pAppTable has an entry for each application to IEEE 802.1p priority (Dot1p) mapping in a virtual routing context on this system.

OBJECT-TYPE

Each row represents a mapping from an application to a Dot1p value for particular virtual routing context. Entries are created at system initialization.

OBJECT-TYPE

The value of tmnxDot1pAppId indicates the Dot1p application identifier for a Layer-2 protocol on the Nokia SROS router.

OBJECT-TYPE

The value of tmnxDot1pAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of tmnxDot1pAppValue specifies a Dot1p value to assign to the traffic generated by the application specified by tmnxDot1pAppId. The default value is protocol specific.

OBJECT-TYPE

The vRtrStatTable has an entry for IOM card configured in the system.

OBJECT-TYPE

Each row entry represents a collection of summarized statistics for each virtual router on an IOM card in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

vRtrFibStatStaticRoutes indicates current static route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatDirectRoutes indicates current direct route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatHostRoutes indicates current host route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatBGPRoutes indicates current BGP route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatBGPVpnRoutes indicates current BGP VPN route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatOSPFRoutes indicates current OSPF route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatISISRoutes indicates current ISIS route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatRIPRoutes indicates current RIP route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatAggrRoutes indicates current aggregate route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatSubMgmtRoutes indicates current Sub-management route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatManagedRoutes indicates current managed route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6StaticRoutes indicates current static route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6DirectRoutes indicates current direct route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6HostRoutes indicates current host route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6BGPRoutes indicates current BGP route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6BGPVpnRoutes indicates current BGP VPN route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6OSPFRoutes indicates current OSPF route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6ISISRoutes indicates current ISIS route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6RIPRoutes indicates current RIP route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6AggrRoutes indicates current aggregate route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6SubMgmtRoutes indicates current Sub-management route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6ManagedRoutes indicates current managed route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatOverflows indicates the number of times the FIB has run out of space due to IPv4 routes.

OBJECT-TYPE

vRtrFibStatAlarmCount indicates the number of times the FIB has raised an alarm due to high FIB usage.

OBJECT-TYPE

vRtrFibStatLastAlarmTime indicates the last time a high FIB usage alarm was raised.

OBJECT-TYPE

vRtrFibStatHighUtilization indicates whether or not the FIB on the IOM is experiences persistent high occupancy.

OBJECT-TYPE

The value of vRtrFibStatMobileHostRoutes indicates the current IPv4 Mobile Host route counts for the virtual router.

OBJECT-TYPE

The value of vRtrFibStatV6MobileHostRoutes indicates the current IPv6 Mobile Host route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatVPNLeakRoutes indicates current VPN Leak route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6VPNLeakRoutes indicates current IPv6 VPN Leak route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatNatRoutes indicates current NAT route counts for the virtual router.

OBJECT-TYPE

vRtrFibStatV6NatRoutes indicates current NAT IPv6 route counts for the virtual router.

OBJECT-TYPE

The value of vRtrFibStatBGPEvpnRoutes indicates the current IPv4 BGP EVPN route counts for the virtual router.

OBJECT-TYPE

The value of vRtrFibStatV6BGPEvpnRoutes indicates the current IPv6 BGP EVPN route counts for the virtual router.

OBJECT-TYPE

The value of vRtrFibStatTotalInstalledRoutes indicates the total number of IPv4 routes installed in hardware FIB.

OBJECT-TYPE

The value of vRtrFibStatCurrentUtilization indicates the space usage by IPv4 routes in hardware FIB in percentage.

OBJECT-TYPE

The value of vRtrFibStatFilteredRoutes indicates the total number of IPv4 routes filtered due to selective download and so not installed in hardware FIB.

OBJECT-TYPE

The value of vRtrFibStatV6TotalInstalledRt indicates the total number of IPv6 routes installed in hardware FIB.

OBJECT-TYPE

The value of vRtrFibStatV6CurrentUtilization indicates the space usage by IPv6 routes in hardware FIB in percentage.

OBJECT-TYPE

The value of vRtrFibStatV6FilteredRoutes indicates the total number of IPv6 routes filtered due to selective download and so not installed in hardware FIB.

OBJECT-TYPE

vRtrFibStatV6Overflows indicates the number of times the FIB has run out of space due to IPv6 routes.

OBJECT-TYPE

The value of vRtrFibStatBGPLabelV4Routes indicates the current labeled IPv4 BGP route counts for the virtual router.

OBJECT-TYPE

The value of vRtrFibStatBGPLabelV6Routes indicates the current labeled IPv6 BGP route counts for the virtual router.

OBJECT-TYPE

The vRtrFibStatNextHopTable has an entry for each IOM in the system.

OBJECT-TYPE

Each row entry represents a collection of statistics for an IOM card in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

vRtrFibStatNextHopIPActive indicates current active IP next-hop counts for the FIB on the IOM.

OBJECT-TYPE

vRtrFibStatNextHopIPAvailable indicates the available IP next-hop counts for the FIB on the IOM.

OBJECT-TYPE

vRtrFibStatNextHopTunnelActive indicates current active Tunnel next-hop counts for the FIB on the IOM.

OBJECT-TYPE

vRtrFibStatNextHopTunnelAvailable indicates the available Tunnel next-hop counts for the FIB on the IOM.

OBJECT-TYPE

The vRtrInetAllCidrRouteTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB, by adding two indexes and displaying both active and inactive CIDR routes.

OBJECT-TYPE

Each row entry in the vRtrInetAllCidrRouteTable represents an entry in the IP CIDR route table for the Nokia SROS series.

OBJECT-TYPE

Additional table index provided to distinguish between multiple routes to same destination with the same inetCidrRouteProto index.

OBJECT-TYPE

The value of vRtrInetAllCidrRouteIfIndex indicates the ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.

OBJECT-TYPE

The value of vRtrInetAllCidrRouteType indicates the type of route. Note that 'local' refers to a route for which the next hop is the final destination; 'remote' refers to a route for which the next hop is not the final destination. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. 'reject' refers to a route which, if matched, discards the message as unreachable and returns a notification (e.g. ICMP error) to the message sender. This is used in some protocols as a means of correctly aggregating routes. 'blackhole' refers to a route which, if matched, discards the message silently.

OBJECT-TYPE

The value of vRtrInetAllCidrRouteAge indicates the number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned.

OBJECT-TYPE

The value of vRtrInetAllCidrRouteNextHopAS indicates the Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's inetCidrRouteProto index. When this object is unknown or not relevant its value should be set to zero.

OBJECT-TYPE

The value of vRtrInetAllCidrRouteMetric1 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1.