BAY-STACK-VRRP-EXT-MIB
- Registered at
- 1.3.6.1.4.1.45.5.11
- Last updated
- 2012-10-18 00:00
- Organization
- Nortel Networks
- Revisions
- 2005-07-01 00:00, 2012-10-18 00:00
- Namespace
- nortel
- Source file
BAY-STACK-VRRP-EXT-MIB- Digest
sha256:0d5a0a4c42509b3838c9607408495219930215c24b4d93be9186f97fecb3d42e
Description
Nortel Networks VRRP Extension MIB Copyright 2005 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Contact
Nortel Networks
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| IP-MIB | ipAdEntAddr |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| SYNOPTICS-ROOT-MIB | bayStackMibs |
| VRRP-MIB | vrrpOperPrimaryIpAddr, vrrpOperVrId |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BAY-STACK-VRRP-EXT-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB IP-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC SYNOPTICS-ROOT-MIB VRRP-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| bsveNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.11.0 | |||
| bsveObjects OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.11.1 | |||
| bsveScalars OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.11.1.1 | |||
| bsveVrrpEnabled OBJECT-TYPE Indicates whether VRRP is globally enabled for the system. | 1.3.6.1.4.1.45.5.11.1.1.1 | TruthValue | read-write | current |
| bsveVrrpPingVirtualAddrEnabled OBJECT-TYPE Indicates whether this device should respond to pings directed to a virtual router's IP address. | 1.3.6.1.4.1.45.5.11.1.1.2 | TruthValue | read-write | current |
| bsveVrrpOperExtTable OBJECT-TYPE Extensions to the vrrpOperTable from RFC 2787. | 1.3.6.1.4.1.45.5.11.1.2 | not-accessible | current | |
| bsveVrrpOperExtEntry OBJECT-TYPE A set of objects that augments the vrrpOperTable. | 1.3.6.1.4.1.45.5.11.1.2.1 | not-accessible | current | |
| bsveVrrpOperExtCriticalIpAddr OBJECT-TYPE IP address of the interface that will cause a shutdown event. | 1.3.6.1.4.1.45.5.11.1.2.1.1 | IpAddress | read-write | current |
| bsveVrrpOperExtCriticalIpAddrEnabled OBJECT-TYPE Indicates whether the user-defined critical IP address is enabled. If the user-defined critical IP address is not enabled, a default critical IP address of 0.0.0.0 will be used. No effect if an user-defined IP address does not exist. | 1.3.6.1.4.1.45.5.11.1.2.1.2 | TruthValue | read-write | current |
| bsveVrrpOperExtHoldDownTimer OBJECT-TYPE Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. | 1.3.6.1.4.1.45.5.11.1.2.1.3 | INTEGER (0..21600) | read-write | current |
| bsveVrrpOperExtHoldDownState OBJECT-TYPE Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise. | 1.3.6.1.4.1.45.5.11.1.2.1.4 | INTEGER {dormant(1), active(2)} | read-only | current |
| bsveVrrpOperExtHoldDownTimeRemaining OBJECT-TYPE Used to indicate the amount of time (in seconds) left before the bsveVrrpOperExtHoldDownTimer will expire. | 1.3.6.1.4.1.45.5.11.1.2.1.5 | INTEGER (0..21600) | read-only | current |
| bsveVrrpOperExtAction OBJECT-TYPE Used to trigger an action on this vrrp interface. | 1.3.6.1.4.1.45.5.11.1.2.1.6 | INTEGER {none(1), preemptHoldDownTimer(2)} | read-write | current |
| bsveVrrpOperExtBackUpMasterEnabled OBJECT-TYPE | 1.3.6.1.4.1.45.5.11.1.2.1.7 | TruthValue | read-write | current |
| bsveVrrpOperExtBackUpMasterState OBJECT-TYPE | 1.3.6.1.4.1.45.5.11.1.2.1.8 | INTEGER {up(1), down(2)} | read-only | current |
| bsveVrrpOperExtFasterAdvInterval OBJECT-TYPE This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of the regular advertisement interval | 1.3.6.1.4.1.45.5.11.1.2.1.9 | Integer32 (200..1000) | read-write | current |
| bsveVrrpOperExtFasterAdvIntervalEnabled OBJECT-TYPE Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval. | 1.3.6.1.4.1.45.5.11.1.2.1.10 | TruthValue | read-write | current |
| bsveNotificationObjects OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.11.1.4 | |||
| bsveVrrpTrapStateTransitionType OBJECT-TYPE Potential types of state transitions. Used by bsveVrrpTrapStateTransition trap. | 1.3.6.1.4.1.45.5.11.1.4.1 | INTEGER {none(1), masterToBackup(2), backupToMaster(3), initializeToMaster(4), masterToInitialize(5), initializeToBackup(6), backupToInitialize(7), backupToBackUpMaster(8), backUpMasterToBackup(9)} | accessible-for-notify | current |
| bsveVrrpTrapStateTransitionCause OBJECT-TYPE Potential types of causes that will generate a bsveVrrpTrapStateTransition trap. | 1.3.6.1.4.1.45.5.11.1.4.2 | INTEGER {none(1), higherPriorityAdvertizeReceived(2), shutdownReceived(3), vrrpAddrAndPhysicalAddrMatch(4), masterDownInterval(5), preempted(6), criticalIPFail(7), usrConfig(8), syncFromPrimary(9), iPInterfaceDown(10), lowerPrioAdvReceived(11), higherSrcIPEqualPrioAdvReceived(12), lowerSrcIPEqualPrioAdvReceived(13), startVR(14), other(15), reboot(16)} | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| bsveVrrpTrapStateTransition NOTIFICATION-TYPE A vrrpTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. | 1.3.6.1.4.1.45.5.11.0.1 | current |