PMIPV6-MIB
- Registered at
- 1.3.6.1.2.1.206
- Last updated
- 2012-05-07 00:00
- Organization
- IETF NETLMM Working Group
- Revisions
- 2012-05-07 00:00
- Namespace
- standard
- Source file
PMIPV6-MIB- Digest
sha256:44586d4ad1c4543cb1f7235880bcf91bfd02ebdc204174eb9473f0de602d888a
Description
The MIB module for monitoring and controlling PMIPv6 entities. Copyright (c) 2012 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Contact
Glenn Mansfield Keeni Postal: Cyber Solutions, Inc. 6-6-3, Minami Yoshinari Aoba-ku, Sendai 989-3204, Japan. Tel: +81-22-303-4012 Fax: +81-22-303-4015 EMail: glenn@cysols.com Kazuhide Koide Postal: KDDI Corporation GARDEN AIR TOWER 3-10-10, Iidabashi Chiyoda-ku, Tokyo 102-8460, Japan. Tel: +81-3-6678-3378 EMail: ka-koide@kddi.com Sri Gundavelli Postal: Cisco 170 W.Tasman Drive, San Jose, CA 95134 USA Tel: +1-408-527-6109 EMail: sgundave@cisco.com Ryuji Wakikawa Postal: TOYOTA InfoTechnology Center, U.S.A., Inc. 465 Bernardo Avenue Mountain View, CA 94043 USA EMail: ryuji@us.toyota-itc.com Support Group EMail: netlmm@ietf.org
Imports
| From | Symbols |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| IP-MIB | Ipv6AddressIfIdentifierTC |
| MOBILEIPV6-MIB | mip6BindingCacheEntry, mip6MnBLEntry |
| PMIPV6-TC-MIB | Pmip6MnIdentifier, Pmip6MnIndex, Pmip6MnInterfaceATT, Pmip6MnLLIdentifier, Pmip6MnLLIndex, Pmip6TimeStamp64 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, mib-2 |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB INET-ADDRESS-MIB IP-MIB MOBILEIPV6-MIB PMIPV6-MIB PMIPV6-TC-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pmip6Notifications OBJECT-IDENTITY | 1.3.6.1.2.1.206.0 | |||
| pmip6Objects OBJECT-IDENTITY | 1.3.6.1.2.1.206.1 | |||
| pmip6Core OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.1 | |||
| pmip6System OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.1.1 | |||
| pmip6Capabilities OBJECT-TYPE This object indicates the PMIPv6 functions that are supported by this managed entity. Multiple Proxy Mobile IPv6 functions may be supported by a single entity. mobilityAccessGateway(0) indicates the availability of the mobility access gateway function. localMobilityAnchor(1) indicates the availability of the local mobility anchor function. | 1.3.6.1.2.1.206.1.1.1.1 | Bits {mobilityAccessGateway(0), localMobilityAnchor(1)} | read-only | current |
| pmip6Bindings OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.1.2 | |||
| pmip6BindingCacheTable OBJECT-TYPE This table models the Binding Cache on the local mobility anchor. Entries from the table are deleted as the lifetime of the binding expires. Entries in this table are not required to survive a reboot of the managed entity. | 1.3.6.1.2.1.206.1.1.2.1 | not-accessible | current | |
| pmip6BindingCacheEntry OBJECT-TYPE An entry containing additional information contained in the Binding Cache table of the local mobility anchor. | 1.3.6.1.2.1.206.1.1.2.1.1 | not-accessible | current | |
| pmip6BindingPBUFlag OBJECT-TYPE true(1) indicates that the local mobility anchor accepted the binding update with Proxy Registration Flag from a mobile access gateway. false(0) implies that the binding cache is from a mobile node. In this case, the remaining objects will not be accessible. | 1.3.6.1.2.1.206.1.1.2.1.1.1 | TruthValue | read-only | current |
| pmip6BindingMnIndex OBJECT-TYPE An index to the identifier of the registered mobile node. | 1.3.6.1.2.1.206.1.1.2.1.1.2 | Pmip6MnIndex | read-only | current |
| pmip6BindingMnLLIndex OBJECT-TYPE The index to the link-layer identifier of the mobile node's connected interface on the access link. | 1.3.6.1.2.1.206.1.1.2.1.1.3 | Pmip6MnLLIndex | read-only | current |
| pmip6BindingMagLinkLocalAddressType OBJECT-TYPE The InetAddressType of the pmip6BindingMagLinkLocalAddress that follows. | 1.3.6.1.2.1.206.1.1.2.1.1.4 | InetAddressType | read-only | current |
| pmip6BindingMagLinkLocalAddress OBJECT-TYPE The link-local address of the mobile access gateway on the point-to-point link shared with the mobile node. This is generated by the local mobility anchor after accepting the initial Proxy Binding Update message. This is the address that is present in the Link-local Address option of the corresponding Proxy Binding Acknowledgement message. | 1.3.6.1.2.1.206.1.1.2.1.1.5 | InetAddress | read-only | current |
| pmip6BindingTunnelIfIdentifier OBJECT-TYPE The tunnel interface identifier (tunnel-if-id) of the bidirectional tunnel between the local mobility anchor and the mobile access gateway where the mobile node is currently anchored. This is internal to the local mobility anchor. The tunnel interface identifier is acquired during the tunnel creation. | 1.3.6.1.2.1.206.1.1.2.1.1.6 | Ipv6AddressIfIdentifierTC | read-only | current |
| pmip6BindingMnInterfaceATT OBJECT-TYPE The access technology type by which the mobile node is currently attached. This is obtained from the Access Technology Type option, present in the Proxy Binding Update message. | 1.3.6.1.2.1.206.1.1.2.1.1.7 | Pmip6MnInterfaceATT | read-only | current |
| pmip6BindingTimeRecentlyAccepted OBJECT-TYPE The 64-bit timestamp value of the most recently accepted Proxy Binding Update message sent for this mobile node. This is the time of day on the local mobility anchor, when the message was received. If the Timestamp option is not present in the Proxy Binding Update message (i.e., when the sequence number based scheme is in use), the value MUST be initialized with all zeroes. | 1.3.6.1.2.1.206.1.1.2.1.1.8 | Pmip6TimeStamp64 | read-only | current |
| pmip6Conf OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.1.3 | |||
| pmip6MobileNodeGeneratedTimestampInUse OBJECT-TYPE This flag indicates whether or not the MN-generated timestamp mechanism is in use in that Proxy Mobile IPv6 domain. true(1) indicates that the local mobility anchors and mobile access gateways in that Proxy Mobile IPv6 domain apply the MN-generated timestamp considerations. false(0) indicates that the MN-generated timestamp mechanism is not in use in that Proxy Mobile IPv6 domain. The default value for this flag is 'false'. | 1.3.6.1.2.1.206.1.1.3.1 | TruthValue | read-write | current |
| pmip6FixedMagLinkLocalAddressOnAllAccessLinksType OBJECT-TYPE The InetAddressType of the pmip6FixedMagLinkLocalAddressOnAllAccessLinks that follows. | 1.3.6.1.2.1.206.1.1.3.2 | InetAddressType | read-write | current |
| pmip6FixedMagLinkLocalAddressOnAllAccessLinks OBJECT-TYPE This variable indicates the link-local address value that all the mobile access gateways should use on any of the access links shared with any of the mobile nodes in that Proxy Mobile IPv6 domain. If this variable is initialized with all zeroes, it implies that the use of fixed link-local address mode is not enabled for that Proxy Mobile IPv6 domain. | 1.3.6.1.2.1.206.1.1.3.3 | InetAddress | read-write | current |
| pmip6FixedMagLinkLayerAddressOnAllAccessLinks OBJECT-TYPE This variable indicates the link-layer address value that all the mobile access gateways should use on any of the access links shared with any of the mobile nodes in that Proxy Mobile IPv6 domain. For access technologies where there is no link-layer address, this variable MUST be initialized with all zeroes. | 1.3.6.1.2.1.206.1.1.3.4 | PhysAddress | read-write | current |
| pmip6Stats OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.1.4 | |||
| pmip6BindingRegCounters OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.1.4.1 | |||
| pmip6MissingMnIdentifierOption OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Missing mobile node identifier option' (Code 160). Discontinuities in the value of this counter can occur at re-initialization of the mobile router, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.1 | Counter32 | read-only | current |
| pmip6MagNotAuthorizedForProxyReg OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Not authorized to send Proxy Binding Updates' (Code 154). Discontinuities in the value of this counter can occur at re-initialization of the mobile router, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.2 | Counter32 | read-only | current |
| pmip6NotLMAForThisMobileNode OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Not local mobility anchor for this mobile node' (Code 153). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.3 | Counter32 | read-only | current |
| pmip6ProxyRegNotEnabled OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Proxy Registration not enabled' (Code 152). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.4 | Counter32 | read-only | current |
| pmip6MissingHomeNetworkPrefixOption OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Missing home network prefix option' (Code 158). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.5 | Counter32 | read-only | current |
| pmip6MissingHandOffIndicatorOption OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Missing handoff indicator option' (Code 161). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.6 | Counter32 | read-only | current |
| pmip6MissingAccessTechTypeOption OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Missing access technology type option' (Code 162). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.7 | Counter32 | read-only | current |
| pmip6NotAuthorizedForHomeNetworkPrefix OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Mobile node not authorized for one or more of the requesting home network prefixes' (Code 155). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.8 | Counter32 | read-only | current |
| pmip6TimestampMismatch OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Invalid timestamp value (the clocks are out of sync)' (Code 156). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.9 | Counter32 | read-only | current |
| pmip6TimestampLowerThanPrevAccepted OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'The timestamp value is lower than the previously accepted value' (Code 157). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.10 | Counter32 | read-only | current |
| pmip6BcePbuPrefixSetDoNotMatch OBJECT-TYPE Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'All the home network prefixes listed in the Binding Cache entry do not match all the prefixes in the received Proxy Binding Update' (Code 159). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.11 | Counter32 | read-only | current |
| pmip6InitialBindingRegistrations OBJECT-TYPE Total number of Proxy Binding Update messages that newly creates the Binding Cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.12 | Counter32 | read-only | current |
| pmip6BindingLifeTimeExtensionNoHandOff OBJECT-TYPE Total number of Proxy Binding Update messages for extending the binding lifetime, received from the same mobile access gateway that last updated the binding. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.13 | Counter32 | read-only | current |
| pmip6BindingLifeTimeExtensionAfterHandOff OBJECT-TYPE Total number of Proxy Binding Update messages for extending the binding lifetime, received from a new mobile access gateway where the mobile node's mobility session is handed off. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.14 | Counter32 | read-only | current |
| pmip6BindingDeRegistrations OBJECT-TYPE Total number of Proxy Binding Update messages with the lifetime value of zero. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.15 | Counter32 | read-only | current |
| pmip6BindingBindingAcks OBJECT-TYPE Total number of Proxy Binding Acknowledgement messages. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. | 1.3.6.1.2.1.206.1.1.4.1.16 | Counter32 | read-only | current |
| pmip6CounterDiscontinuityTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which any one or more of this PMIPv6 entity's global counters, viz., counters with OID prefix 'pmip6BindingRegCounters' suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value. | 1.3.6.1.2.1.206.1.1.4.1.17 | TimeStamp | read-only | current |
| pmip6Mag OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.2 | |||
| pmip6MagSystem OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.2.1 | |||
| pmip6MagStatus OBJECT-TYPE This object indicates whether the PMIPv6 mobile access gateway function is enabled for the managed entity. Changing the status from enabled(1) to disabled(2) will terminate the PMIPv6 mobile access gateway function. On the other hand, changing the status from disabled(2) to enabled(1) will start the PMIPv6 mobile access gateway function. The value of this object MUST remain unchanged across reboots of the managed entity. | 1.3.6.1.2.1.206.1.2.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| pmip6MagProxyCOATable OBJECT-TYPE This table models the Proxy Care-of Addresses configured on the egress interfaces of the mobile access gateway. This address is the transport endpoint of the tunnel between the local mobility anchor and the mobile access gateway. Entries in this table are not required to survive a reboot of the managed entity. | 1.3.6.1.2.1.206.1.2.1.2 | not-accessible | current | |
| pmip6MagProxyCOAEntry OBJECT-TYPE This entry represents a conceptual row in the Proxy-CoA table. It represents a Proxy Care-of Address on the mobile access gateway. Implementers need to be aware that if the total number of octets in pmip6MagProxyCOA exceeds 113, then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.206.1.2.1.2.1 | not-accessible | current | |
| pmip6MagProxyCOAType OBJECT-TYPE The InetAddressType of the pmip6MagProxyCOA that follows. | 1.3.6.1.2.1.206.1.2.1.2.1.1 | InetAddressType | not-accessible | current |
| pmip6MagProxyCOA OBJECT-TYPE The Proxy-CoA configured on the egress interface of the mobile access gateway. The type of the address represented by this object is specified by the corresponding pmip6MagProxyCOAType object. | 1.3.6.1.2.1.206.1.2.1.2.1.2 | InetAddress | not-accessible | current |
| pmip6MagProxyCOAState OBJECT-TYPE This object indicates the state of the Proxy-CoA: unknown -- The state of the Proxy-CoA cannot be determined. activated -- The Proxy-CoA is ready to establish a tunnel. This state SHOULD be indicated when the MAG is up but has no mobile node. tunneled -- Bidirectional tunnel is established using the Proxy-CoA. | 1.3.6.1.2.1.206.1.2.1.2.1.3 | INTEGER {unknown(1), activated(2), tunneled(3)} | read-only | current |
| pmip6MagConf OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.2.2 | |||
| pmip6MagEnableMagLocalRouting OBJECT-TYPE This flag indicates whether or not the mobile access gateway is allowed to enable local routing of the traffic exchanged between a visiting mobile node and a correspondent node that is locally connected to one of the interfaces of the mobile access gateway. The correspondent node can be another visiting mobile node as well, or a local fixed node. true(1) indicates that the mobile access gateway routes the traffic locally. false(0) indicates that the mobile access gateway reverse tunnels all the traffic to the mobile node's local mobility anchor. The default value for this flag is 'false'. | 1.3.6.1.2.1.206.1.2.2.1 | TruthValue | read-write | current |
| pmip6MagMnIdentifierTable OBJECT-TYPE A table containing the identifiers of mobile nodes attached to the MAG. Entries in this table are not required to survive a reboot of the managed entity. | 1.3.6.1.2.1.206.1.2.2.2 | not-accessible | current | |
| pmip6MagMnIdentifierEntry OBJECT-TYPE An entry in the mobile node identifier table. | 1.3.6.1.2.1.206.1.2.2.2.1 | not-accessible | current | |
| pmip6MagMnIdentifier OBJECT-TYPE The identity of a mobile node in the Proxy Mobile IPv6 domain. | 1.3.6.1.2.1.206.1.2.2.2.1.1 | Pmip6MnIdentifier | read-only | current |
| pmip6MagMnLLIdentifierTable OBJECT-TYPE A table containing the link-layer identifiers of the interfaces of the mobile nodes attached to the MAG. Entries in this table are not required to survive a reboot of the managed entity. | 1.3.6.1.2.1.206.1.2.2.3 | not-accessible | current | |
| pmip6MagMnLLIdentifierEntry OBJECT-TYPE An entry in the mobile node link-layer identifier table. | 1.3.6.1.2.1.206.1.2.2.3.1 | not-accessible | current | |
| pmip6MagMnLLIdentifier OBJECT-TYPE The link-layer identifier of the mobile node's connected interface on the access link. | 1.3.6.1.2.1.206.1.2.2.3.1.1 | Pmip6MnLLIdentifier | read-only | current |
| pmip6MagHomeNetworkPrefixTable OBJECT-TYPE A table representing the home network prefixes assigned to the connected interfaces of mobile nodes attached to the MAG. | 1.3.6.1.2.1.206.1.2.2.4 | not-accessible | current | |
| pmip6MagHomeNetworkPrefixEntry OBJECT-TYPE An entry in the home network prefixes table. Implementers need to be aware that if the total number of octets in pmip6MagHomeNetworkPrefix exceeds 111, then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.206.1.2.2.4.1 | not-accessible | current | |
| pmip6MagHomeNetworkPrefixType OBJECT-TYPE The InetAddressType of the pmip6MagHomeNetworkPrefix that follows. | 1.3.6.1.2.1.206.1.2.2.4.1.1 | InetAddressType | not-accessible | current |
| pmip6MagHomeNetworkPrefix OBJECT-TYPE The mobile network prefix that is delegated to the mobile node. The type of the address represented by this object is specified by the corresponding pmip6MagHomeNetworkPrefixType object. | 1.3.6.1.2.1.206.1.2.2.4.1.2 | InetAddress | not-accessible | current |
| pmip6MagHomeNetworkPrefixLength OBJECT-TYPE The prefix length of the home network prefix. | 1.3.6.1.2.1.206.1.2.2.4.1.3 | InetAddressPrefixLength | read-only | current |
| pmip6MagHomeNetworkPrefixLifeTime OBJECT-TYPE The lifetime parameter (in seconds) that will be advertised in Router Advertisements by the MAG for this home network prefix. | 1.3.6.1.2.1.206.1.2.2.4.1.4 | Unsigned32 | read-only | current |
| pmip6MagRegistration OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.2.3 | |||
| pmip6MagBLTable OBJECT-TYPE This table corresponds to the Binding Update List (BL) that includes PMIPv6-related information and is maintained by the mobile access gateway. Entries from the table are deleted as the lifetime of the binding expires. | 1.3.6.1.2.1.206.1.2.3.1 | not-accessible | current | |
| pmip6MagBLEntry OBJECT-TYPE An entry containing additional information from a Binding Update sent by the mobile access gateway to the local mobility anchor. | 1.3.6.1.2.1.206.1.2.3.1.1 | not-accessible | current | |
| pmip6MagBLFlag OBJECT-TYPE true(1) indicates that the mobile access gateway sent the Proxy Binding Update with Proxy Registration Flag that indicates to the local mobility anchor that the registration is the Proxy Binding Update and is from a mobile access gateway. false(0) implies that the mobile access gateway is behaving as a simple mobile node. | 1.3.6.1.2.1.206.1.2.3.1.1.1 | TruthValue | read-only | current |
| pmip6MagBLMnIndex OBJECT-TYPE The index to the identifier of the attached mobile node in the pmip6MagMnIdentifierTable. | 1.3.6.1.2.1.206.1.2.3.1.1.2 | Pmip6MnIndex | read-only | current |
| pmip6MagBLMnLLIndex OBJECT-TYPE The index to the link-layer identifier of the mobile node's connected interface in the pmip6MagMnLLIdentifierTable. | 1.3.6.1.2.1.206.1.2.3.1.1.3 | Pmip6MnLLIndex | read-only | current |
| pmip6MagBLMagLinkLocalAddressType OBJECT-TYPE The InetAddressType of the pmip6MagBLMagLinkLocalAddress that follows. | 1.3.6.1.2.1.206.1.2.3.1.1.4 | InetAddressType | read-only | current |
| pmip6MagBLMagLinkLocalAddress OBJECT-TYPE The link-local address of the mobile access gateway on the access link shared with the mobile node. This is the address that is present in the Link-local Address option of the corresponding Proxy Binding Update message. | 1.3.6.1.2.1.206.1.2.3.1.1.5 | InetAddress | read-only | current |
| pmip6MagBLMagIfIdentifierToMn OBJECT-TYPE The interface identifier (if-id) of the point-to-point link between the mobile node and the mobile access gateway. This is internal to the mobile access gateway and is used to associate the Proxy Mobile IPv6 tunnel to the access link where the mobile node is attached. | 1.3.6.1.2.1.206.1.2.3.1.1.6 | Ipv6AddressIfIdentifierTC | read-only | current |
| pmip6MagBLTunnelIfIdentifier OBJECT-TYPE The tunnel interface identifier (tunnel-if-id) of the bidirectional tunnel between the mobile node's local mobility anchor and the mobile access gateway. This is internal to the mobile access gateway. The tunnel interface identifier is acquired during the tunnel creation. | 1.3.6.1.2.1.206.1.2.3.1.1.7 | Ipv6AddressIfIdentifierTC | read-only | current |
| pmip6MagBLMnInterfaceATT OBJECT-TYPE The type of the access technology by which the mobile node is currently attached to the mobile access gateway. | 1.3.6.1.2.1.206.1.2.3.1.1.8 | Pmip6MnInterfaceATT | read-only | current |
| pmip6MagBLTimeRecentlyAccepted OBJECT-TYPE The 64-bit timestamp value of the most recently accepted Proxy Binding Update message sent for this mobile node. This is the time of day on the mobile access gateway, when the Proxy Binding Acknowledgement message with the Status field set to 0 was received. If the Timestamp option is not present in the Proxy Binding Update message (i.e., when the sequence-number-based scheme is in use), the value MUST be initialized with all zeroes. | 1.3.6.1.2.1.206.1.2.3.1.1.9 | Pmip6TimeStamp64 | read-only | current |
| pmip6MagMnProfileTable OBJECT-TYPE This table corresponds to the mobile node's policy profile that includes the essential operational parameters that are required by the network entities for managing the mobile node's mobility service. It contains policy profiles of mobile nodes that are connected to the mobile access gateway. Entries in this table are not required to survive a reboot of the managed entity. | 1.3.6.1.2.1.206.1.2.3.2 | not-accessible | current | |
| pmip6MagMnProfileEntry OBJECT-TYPE An entry containing information about the mobile node's policy profile. | 1.3.6.1.2.1.206.1.2.3.2.1 | not-accessible | current | |
| pmip6MagProfMnIndex OBJECT-TYPE The index for a mobile node in the Proxy Mobile IPv6 domain. | 1.3.6.1.2.1.206.1.2.3.2.1.1 | Pmip6MnIndex | not-accessible | current |
| pmip6MagProfMnIdentifier OBJECT-TYPE The identity of a mobile node in the Proxy Mobile IPv6 domain. | 1.3.6.1.2.1.206.1.2.3.2.1.2 | Pmip6MnIdentifier | read-only | current |
| pmip6MagProfMnLocalMobilityAnchorAddressType OBJECT-TYPE The InetAddressType of the pmip6MagMnLocalMobilityAnchorAddress that follows. | 1.3.6.1.2.1.206.1.2.3.2.1.3 | InetAddressType | read-only | current |
| pmip6MagProfMnLocalMobilityAnchorAddress OBJECT-TYPE The global address that is configured on the interface of the local mobility anchor and is the transport endpoint of the bidirectional tunnel established between the local mobility anchor and the mobile access gateway. This is the address to which the mobile access gateway sends the Proxy Binding Update messages. | 1.3.6.1.2.1.206.1.2.3.2.1.4 | InetAddress | read-only | current |
| pmip6Lma OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.3 | |||
| pmip6LmaSystem OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.3.1 | |||
| pmip6LmaStatus OBJECT-TYPE This object indicates whether the PMIPv6 local mobility anchor function is enabled for the managed entity. Changing the status from enabled(1) to disabled(2) will terminate the PMIPv6 local mobility anchor function. On the other hand, changing the status from disabled(2) to enabled(1) will start the PMIPv6 local mobility anchor function. The value of this object MUST remain unchanged across reboots of the managed entity. | 1.3.6.1.2.1.206.1.3.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| pmip6LmaLMAATable OBJECT-TYPE This table models the LMA Addresses configured on the local mobility anchor. Each LMA Address acts as a transport endpoint of the tunnel between the local mobility anchor and the mobile access gateway and is the transport endpoint of the tunnel between the local mobility anchor and the mobile access gateway. Entries in this table are not required to survive a reboot of the managed entity. | 1.3.6.1.2.1.206.1.3.1.2 | not-accessible | current | |
| pmip6LmaLMAAEntry OBJECT-TYPE This entry represents a conceptual row in the LMAA table. It represents each LMAA on the local mobility anchor. Implementers need to be aware that if the total number of octets in pmip6LmaLMAA exceeds 113, then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.206.1.3.1.2.1 | not-accessible | current | |
| pmip6LmaLMAAType OBJECT-TYPE The InetAddressType of the pmip6LmaLMAA that follows. | 1.3.6.1.2.1.206.1.3.1.2.1.1 | InetAddressType | not-accessible | current |
| pmip6LmaLMAA OBJECT-TYPE The LMAA configured on the local mobility anchor. The type of the address represented by this object is specified by the corresponding pmip6LmaLMAAType object. | 1.3.6.1.2.1.206.1.3.1.2.1.2 | InetAddress | not-accessible | current |
| pmip6LmaLMAAState OBJECT-TYPE This object indicates the state of the LMAA: unknown -- The state of the LMAA cannot be determined. activated -- The LMAA is ready to establish a tunnel. tunneled -- The LMAA is used to set up the bidirectional tunnel. | 1.3.6.1.2.1.206.1.3.1.2.1.3 | INTEGER {unknown(1), activated(2), tunneled(3)} | read-only | current |
| pmip6LmaConf OBJECT-IDENTITY | 1.3.6.1.2.1.206.1.3.2 | |||
| pmip6LmaMinDelayBeforeBCEDelete OBJECT-TYPE This variable specifies the length of time in milliseconds the local mobility anchor MUST wait before it deletes a Binding Cache entry of a mobile node, upon receiving a Proxy Binding Update message from a mobile access gateway with a lifetime value of 0. During this wait time, if the local mobility anchor receives a Proxy Binding Update for the same mobility binding, with a lifetime value greater than 0, then it must update the Binding Cache entry with the accepted binding values. By the end of this wait time, if the local mobility anchor did not receive any valid Proxy Binding Update message for that mobility binding, it MUST delete the Binding Cache entry. This delay essentially ensures that a mobile node's Binding Cache entry is not deleted too quickly and allows some time for the new mobile access gateway to complete the signaling for the mobile node. The default value for this variable is 10000 milliseconds. | 1.3.6.1.2.1.206.1.3.2.1 | Integer32 (1..65535) | read-write | current |
| pmip6LmaMaxDelayBeforeNewBCEAssign OBJECT-TYPE This variable specifies the length of time in milliseconds the local mobility anchor MUST wait for the de-registration message for an existing mobility session before it decides to create a new mobility session. The default value for this variable is 1500 milliseconds. Note that there is a dependency between this value and the values used in the retransmission algorithm for Proxy Binding Updates. The retransmissions need to happen before MaxDelayBeforeNewBCEAssign runs out, as otherwise there are situations where a de-registration from a previous mobile access gateway may be lost, and the local mobility anchor creates, needlessly, a new mobility session and new prefixes for the mobile node. However, this affects situations where there is no information from the lower layers about the type of a handoff or other parameters that can be used for identifying the mobility session. | 1.3.6.1.2.1.206.1.3.2.2 | Integer32 (1..65535) | read-write | current |
| pmip6LmaTimestampValidityWindow OBJECT-TYPE This variable specifies the maximum length of time difference in milliseconds between the timestamp in the received Proxy Binding Update message and the current time of day on the local mobility anchor that is allowed by the local mobility anchor for the received message to be considered valid. The default value for this variable is 300 milliseconds. This variable must be adjusted to suit the deployments. | 1.3.6.1.2.1.206.1.3.2.3 | Integer32 (1..65535) | read-write | current |
| pmip6LmaMnIdentifierTable OBJECT-TYPE A table containing the identifiers of mobile nodes served by the LMA. Entries in this table are not required to survive a reboot of the managed entity. | 1.3.6.1.2.1.206.1.3.2.4 | not-accessible | current | |
| pmip6LmaMnIdentifierEntry OBJECT-TYPE An entry in the mobile node identifier table. | 1.3.6.1.2.1.206.1.3.2.4.1 | not-accessible | current | |
| pmip6LmaMnIdentifier OBJECT-TYPE The identity of a mobile node in the Proxy Mobile IPv6 domain. | 1.3.6.1.2.1.206.1.3.2.4.1.1 | Pmip6MnIdentifier | read-only | current |
| pmip6LmaMnLLIdentifierTable OBJECT-TYPE A table containing the link-layer identifiers of the interfaces of the mobile nodes served by the LMA. Entries in this table are not required to survive a reboot of the managed entity. | 1.3.6.1.2.1.206.1.3.2.5 | not-accessible | current | |
| pmip6LmaMnLLIdentifierEntry OBJECT-TYPE An entry in the mobile node link-layer identifier table. | 1.3.6.1.2.1.206.1.3.2.5.1 | not-accessible | current | |
| pmip6LmaMnLLIdentifier OBJECT-TYPE The link-layer identifier of the mobile node's connected interface on the access link. | 1.3.6.1.2.1.206.1.3.2.5.1.1 | Pmip6MnLLIdentifier | read-only | current |
| pmip6LmaHomeNetworkPrefixTable OBJECT-TYPE A table representing the home network prefixes assigned to the connected interfaces of all the mobile nodes anchored at the LMA. | 1.3.6.1.2.1.206.1.3.2.6 | not-accessible | current | |
| pmip6LmaHomeNetworkPrefixEntry OBJECT-TYPE An entry in the home network prefixes table. Implementers need to be aware that if the total number of octets in pmip6LmaHomeNetworkPrefix exceeds 111 then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.206.1.3.2.6.1 | not-accessible | current | |
| pmip6LmaHomeNetworkPrefixType OBJECT-TYPE The InetAddressType of the pmip6LmaHomeNetworkPrefix that follows. | 1.3.6.1.2.1.206.1.3.2.6.1.1 | InetAddressType | not-accessible | current |
| pmip6LmaHomeNetworkPrefix OBJECT-TYPE The mobile network prefix that is delegated to the mobile node. The type of the address represented by this object is specified by the corresponding pmip6LmaHomeNetworkPrefixType object. | 1.3.6.1.2.1.206.1.3.2.6.1.2 | InetAddress | not-accessible | current |
| pmip6LmaHomeNetworkPrefixLength OBJECT-TYPE The prefix length of the home network prefix. | 1.3.6.1.2.1.206.1.3.2.6.1.3 | InetAddressPrefixLength | read-only | current |
| pmip6LmaHomeNetworkPrefixLifeTime OBJECT-TYPE The lifetime (in seconds) granted to the mobile node for this registration. | 1.3.6.1.2.1.206.1.3.2.6.1.4 | Gauge32 | read-write | current |
| pmip6Conformance OBJECT-IDENTITY | 1.3.6.1.2.1.206.2 | |||
| pmip6Groups OBJECT-IDENTITY | 1.3.6.1.2.1.206.2.1 | |||
| pmip6Compliances OBJECT-IDENTITY | 1.3.6.1.2.1.206.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| pmip6MagHomeTunnelEstablished NOTIFICATION-TYPE This notification is sent by the Proxy Mobile IPv6 entities every time the tunnel is established between the local mobility anchor and mobile access gateway. | 1.3.6.1.2.1.206.0.1 | current |
| pmip6MagHomeTunnelReleased NOTIFICATION-TYPE This notification is sent by the Proxy Mobile IPv6 entities every time the tunnel between the local mobility anchor and mobile access gateway is released. | 1.3.6.1.2.1.206.0.2 | current |
| pmip6LmaHomeTunnelEstablished NOTIFICATION-TYPE This notification is sent by the Proxy Mobile IPv6 entities every time the tunnel is established between the local mobility anchor and mobile access gateway. | 1.3.6.1.2.1.206.0.3 | current |
| pmip6LmaHomeTunnelReleased NOTIFICATION-TYPE This notification is sent by the Proxy Mobile IPv6 entities every time the tunnel between the local mobility anchor and mobile access gateway is released. | 1.3.6.1.2.1.206.0.4 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| pmip6SystemGroup OBJECT-GROUP A collection of objects for basic PMIPv6 monitoring. | 1.3.6.1.2.1.206.2.1.1 | current |
| pmip6BindingCacheGroup OBJECT-GROUP A collection of objects for monitoring the PMIPv6 extensions of the Binding Cache. | 1.3.6.1.2.1.206.2.1.2 | current |
| pmip6StatsGroup OBJECT-GROUP A collection of objects for basic PMIPv6 statistics monitoring. | 1.3.6.1.2.1.206.2.1.3 | current |
| pmip6MagSystemGroup OBJECT-GROUP A collection of objects for monitoring the PMIPv6-system-related objects on a mobile router. | 1.3.6.1.2.1.206.2.1.4 | current |
| pmip6MagConfigurationGroup OBJECT-GROUP A collection of objects for monitoring the configuration-related objects on a mobile access gateway. | 1.3.6.1.2.1.206.2.1.5 | current |
| pmip6MagRegistrationGroup OBJECT-GROUP A collection of objects for monitoring the registration-related objects on a mobile access gateway. | 1.3.6.1.2.1.206.2.1.6 | current |
| pmip6LmaSystemGroup OBJECT-GROUP A collection of objects for monitoring the system-related objects on an LMA. | 1.3.6.1.2.1.206.2.1.7 | current |
| pmip6LmaConfigurationGroup OBJECT-GROUP A collection of objects for Monitoring the configuration-related objects on an LMA. | 1.3.6.1.2.1.206.2.1.8 | current |
| pmip6MagNotificationGroup NOTIFICATION-GROUP A collection of notifications from a home agent or correspondent node to the Manager about the tunnel status of the mobile router. | 1.3.6.1.2.1.206.2.1.9 | current |
| pmip6LmaNotificationGroup NOTIFICATION-GROUP A collection of notifications from a home agent or correspondent node to the Manager about the tunnel status of the mobile router. | 1.3.6.1.2.1.206.2.1.10 | current |
| pmip6CoreCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6BindingHomeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- ipv6 addresses for the pmip6BindingHomeAddress -- object. -- | 1.3.6.1.2.1.206.2.2.1 | current |
| pmip6Compliance2 MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB. | 1.3.6.1.2.1.206.2.2.2 | current |
| pmip6CoreReadOnlyCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read-write (i.e., in read-only mode). | 1.3.6.1.2.1.206.2.2.3 | current |
| pmip6ReadOnlyCompliance2 MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read-write (i.e., in read-only mode). | 1.3.6.1.2.1.206.2.2.4 | current |
| pmip6MagCoreCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6MagProxyCOAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOAType -- object. -- -- OBJECT pmip6MagProxyCOA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOA -- object. -- | 1.3.6.1.2.1.206.2.2.5 | current |
| pmip6MagCompliance2 MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB for monitoring configuration- related information, registration details, and statistics on a mobile access gateway. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6MagProxyCOAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOA -- object. -- -- OBJECT pmip6MagProxyCOA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOAType -- object. -- -- OBJECT pmip6MagHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- -- OBJECT pmip6MagHomeNetworkPrefix -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- | 1.3.6.1.2.1.206.2.2.6 | current |
| pmip6MagCoreReadOnlyCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read-write (i.e., in read-only mode). There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6MagProxyCOAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOA -- object. -- -- OBJECT pmip6MagProxyCOA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOAType -- object. -- -- OBJECT pmip6MagHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- | 1.3.6.1.2.1.206.2.2.7 | current |
| pmip6MagReadOnlyCompliance2 MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read- write (i.e., in read-only mode) and with support for monitoring configuration-related information, registration details, and statistics on a mobile access gateway. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6MagProxyCOAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOA -- object. -- -- OBJECT pmip6MagProxyCOA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOAType -- object. -- -- OBJECT pmip6MagHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- -- OBJECT pmip6MagHomeNetworkPrefix -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- | 1.3.6.1.2.1.206.2.2.8 | current |
| pmip6LmaCoreCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6LmaLMAAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaLMAA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- | 1.3.6.1.2.1.206.2.2.9 | current |
| pmip6LmaCompliance2 MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB for monitoring configuration- related information, registration details, and statistics on a mobile access gateway. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6LmaLMAAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaLMAA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6LmaHomeNetworkPrefix object. -- -- OBJECT pmip6LmaHomeNetworkPrefix -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6LmaHomeNetworkPrefix object. -- | 1.3.6.1.2.1.206.2.2.10 | current |
| pmip6LmaReadOnlyCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6LmaLMAAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaLMAA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- | 1.3.6.1.2.1.206.2.2.11 | current |
| pmip6LmaReadOnlyCompliance2 MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read-write (i.e., in read-only mode) and for monitoring configuration-related information, registration details, and statistics on a mobile access gateway. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6LmaLMAAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaLMAA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6LmaHomeNetworkPrefix object. -- -- OBJECT pmip6LmaHomeNetworkPrefix -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6LmaHomeNetworkPrefix object. -- | 1.3.6.1.2.1.206.2.2.12 | current |
| pmip6MagNotificationCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB and support notification from the mobile access gateway. | 1.3.6.1.2.1.206.2.2.13 | current |
| pmip6LmaNotificationCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the PMIPV6-MIB and support notification from the LMA. | 1.3.6.1.2.1.206.2.2.14 | current |