HUAWEI-IF-EXT-MIB
- Registered at
- 1.3.6.1.4.1.2011.5.25.41
- Last updated
- 2019-01-09 00:00
- Organization
- Huawei Technologies Co.,Ltd.
- Revisions
- 2019-01-09 00:00, 2019-01-07 00:00, 2018-08-17 00:00, 2018-06-13 00:00, 2018-06-06 00:00, 2018-02-07 00:00, 2018-02-07 00:00, 2018-01-26 00:00, 2018-01-25 00:00, 2018-01-19 00:00, 2018-01-15 00:00, 2017-12-20 00:00, 2017-11-28 00:00, 2017-11-14 00:00, 2017-11-06 00:00, 2017-10-28 00:00, 2017-10-25 00:00, 2017-10-12 00:00, 2017-09-24 00:00, 2017-09-14 00:00, 2017-08-29 00:00, 2017-08-18 00:00, 2017-08-17 00:00, 2017-07-27 00:00, 2017-07-24 00:00, 2017-03-29 00:00, 2017-03-16 00:00, 2017-01-24 00:00, 2017-01-24 00:00, 2017-01-19 00:00, 2016-12-28 00:00, 2016-10-10 00:00, 2016-09-27 10:00, 2016-09-23 20:26, 2016-08-06 20:26, 2016-05-21 00:00, 2015-12-23 00:00, 2015-12-08 00:00, 2015-09-06 00:00, 2015-08-06 00:00, 2015-06-29 00:00, 2015-05-14 00:00, 2015-03-27 20:26, 2015-03-26 20:26, 2015-02-03 20:26, 2015-01-05 20:26, 2014-12-25 20:26, 2014-11-05 20:26, 2014-09-10 20:26, 2014-08-13 20:26, 2014-08-06 20:26, 2014-06-09 20:26, 2014-06-06 20:26, 2014-03-25 20:26, 2014-03-06 16:26, 2014-03-03 09:39, 2014-02-11 19:00, 2014-02-10 19:00, 2014-02-07 19:00, 2014-01-26 19:00, 2014-01-18 12:00, 2014-01-16 19:00, 2014-01-13 16:00, 2013-09-05 14:00, 2013-07-02 14:00, 2013-06-08 18:30, 2013-06-05 11:00, 2013-05-21 20:00, 2013-01-22 00:00
- Namespace
- huawei
- Source file
HUAWEI-IF-EXT-MIB- Digest
sha256:8098fc4d7eb9e3d7db569ee316837256b36c2fec9cb50a066001746d7b685778
Description
V3.01 add hwTrunkMemberChange
Contact
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com
Imports
| From | Symbols |
|---|---|
| ATM-TC-MIB | AtmVcIdentifier, AtmVpIdentifier |
| HCNUM-TC | CounterBasedGauge64 |
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifAdminStatus, ifDescr, ifIndex, ifName, ifOperStatus |
| INET-ADDRESS-MIB | InetVersion |
| IP-MIB | ipAdEntNetMask |
| Q-BRIDGE-MIB | PortList, VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysUpTime |
| SNMPv2-SMI | Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-TC-MIB BRIDGE-MIB HCNUM-TC HUAWEI-IF-EXT-MIB HUAWEI-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB IP-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| EnabledStatus TEXTUAL-CONVENTION A simple status value for the object. | current | |||
| HWDirectionType TEXTUAL-CONVENTION The Direction Flux Limit apply on. | current | |||
| HwIpAddressType TEXTUAL-CONVENTION The type of IP address. | current | |||
| SnmpPasswdString TEXTUAL-CONVENTION The password string | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwIFExtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1 | |||
| hwIFExtBase OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.1 | |||
| hwIFExtTable OBJECT-TYPE Interface extended table of private mib. | 1.3.6.1.4.1.2011.5.25.41.1.1.1 | not-accessible | current | |
| hwIFExtEntry OBJECT-TYPE Entries of private extended interface table. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1 | not-accessible | current | |
| hwIFExtIndex OBJECT-TYPE Index of extended table of interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.1 | InterfaceIndex | not-accessible | current |
| hwIFExtLayer OBJECT-TYPE Switch the port between Layer3 and Layer2. Corresponding to the port switch command.Layer2(1) is 1 when the port switch from layer3 to layer2.Layer3(1) is 1 when the port switch from lyaer2 to layer3. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.2 | INTEGER {layer2(1), layer3(2)} | read-write | current |
| hwIFExtFrameType OBJECT-TYPE Frame type is accepted by VLAN virtual interfaces.Frame format contains ethernetII(1),ethernetII(2),ethernet8022(3),ethernet8023. The type location setting 1 when the ethernetII(1) type is accepted.Now only surpport the first(ethernetII(1)) | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.3 | INTEGER {ethernetII(1), ethernetSnap(2), ethernet8022(3), ethernet8023(4), other(5)} | read-only | current |
| hwIFExtFlowStatInterval OBJECT-TYPE The value of this object identifies the interval for collecting the statistics of the interface traffic. The value ranges from 10 to 600, in seconds. The default interval is 300s.If intervals for collecting traffic statistics are configured both in the interface view and globally, the configuration in the interface view takes effect.If no interval for collecting traffic statistics is configured in the interface view, the global configuration takes effect.The real-time traffic statistics collection rate is affected by the interval for collecting traffic statistics. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.4 | Integer32 (10..600) | read-write | current |
| hwIFExtFlushReceiveEnable OBJECT-TYPE Whether or not permit the port to take over FLUSHDUs. Once it is enabled, the port will take over SmartLink FlushDUs from related vlans so as to delete the MAC forwarding table in the local equipment. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.5 | EnabledStatus | read-write | current |
| hwIFExtFlushVlanId OBJECT-TYPE The ID of Vlan the port belongs to.When it is 0, it indicates the function of receiving FlushPDU is disabled. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.6 | VlanIdOrNone | read-write | current |
| hwIFExtFlushPasswd OBJECT-TYPE A 16-octet read-write value used to define the password for negotiation. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.7 | SnmpPasswdString | read-write | current |
| hwIFExtFlowStatus OBJECT-TYPE Current flow status of interface. 1:flow up 2:flow down | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.8 | INTEGER {flowUp(1), flowDown(2)} | read-only | current |
| hwIFExtMtu OBJECT-TYPE The value of this object identifies the MTU of an interface. The MTU value varies according to different interfaces. The default MTU value also varies. The MTU value can be modified. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.9 | Integer32 | read-write | current |
| hwIFExtMacAddr OBJECT-TYPE The MAC address of the interface . | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.10 | PhysAddress | read-write | current |
| hwIFExtBlockPriority OBJECT-TYPE The blocked priority of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.11 | Integer32 (0..255) | read-write | current |
| hwIFExtMacShift OBJECT-TYPE The mac-shift state of the interface. 1:normal 2:monitor mac-shift | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.12 | INTEGER {normal(1), macShift(2)} | read-write | current |
| hwIFExtSuppressStatus OBJECT-TYPE The suppress state of the interface. 0:unsuppress 1:suppress | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.13 | INTEGER {unsuppress(0), suppress(1)} | read-only | current |
| hwIFExtPoisonReverse OBJECT-TYPE Whether or not enable Split-horizon forwarding | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.14 | EnabledStatus | read-write | current |
| hwIFExtInputPktRate OBJECT-TYPE This object indicates the rate of the incoming packets on an interface. The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits, while hwIFExtInputHighPktRate indicates the higher 32 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.15 | Gauge32 | read-only | current |
| hwIFExtInputHighPktRate OBJECT-TYPE This object indicates the rate of the incoming packets on an interface. The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits, while hwIFExtInputHighPktRate indicates the higher 32 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.16 | Gauge32 | read-only | current |
| hwIFExtOutputPktRate OBJECT-TYPE This object indicates the rate of the outgoing packets on an interface. The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits, while hwIFExtOutputHighPktRate indicates the higher 32 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.17 | Gauge32 | read-only | current |
| hwIFExtOutputHighPktRate OBJECT-TYPE This object indicates the rate of the outgoing packets on an interface. The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits, while hwIFExtOutputHighPktRate indicates the higher 32 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.18 | Gauge32 | read-only | current |
| hwIFExtInputOctetRate OBJECT-TYPE This object indicates the octet rate of the incoming traffic on an interface. The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits, while hwIFExtInputHighOctetRate indicates the higher 32 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.19 | Gauge32 | read-only | current |
| hwIFExtInputHighOctetRate OBJECT-TYPE This object indicates the octet rate of the incoming traffic on an interface. The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits, while hwIFExtInputHighOctetRate indicates the higher 32 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.20 | Gauge32 | read-only | current |
| hwIFExtOutputOctetRate OBJECT-TYPE This object indicates the octet rate of the outgoing traffic on an interface. The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits, while hwIFExtOutputHighOctetRate indicates the higher 32 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.21 | Gauge32 | read-only | current |
| hwIFExtOutputHighOctetRate OBJECT-TYPE This object indicates the octet rate of the outgoing traffic on an interface. The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits, while hwIFExtOutputHighOctetRate indicates the higher 32 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.22 | Gauge32 | read-only | current |
| hwIFExtSwitchPortIndex OBJECT-TYPE Number of layer2 interface port, a unique value, for each port.It is recommended that values are assigned contiguously starting from 1. If the return value is -1, this interface is not a Layer 2 interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.23 | Integer32 | read-only | current |
| hwIFExtSuppressStatusIPv6 OBJECT-TYPE The suppress state of the interface(IPv6). 0:unsuppress 1:suppress | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.24 | INTEGER {unsuppress(0), suppress(1)} | read-only | current |
| hwIFExtInputPkts OBJECT-TYPE The total number of packets received on the interface. The counter value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.25 | Counter64 | read-only | current |
| hwIFExtOutputPkts OBJECT-TYPE The total number of packets transmitted out of the interface. The counter value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.26 | Counter64 | read-only | current |
| hwIFExtInputUnicastBitRate OBJECT-TYPE This object indicates the bit rate of the incoming unicast traffic on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.27 | CounterBasedGauge64 | read-only | current |
| hwIFExtOutputUnicastBitRate OBJECT-TYPE This object indicates the bit rate of the outgoing unicast traffic on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.28 | CounterBasedGauge64 | read-only | current |
| hwIFExtInputMulticastBitRate OBJECT-TYPE This object indicates the bit rate of the incoming multicast traffic on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.29 | CounterBasedGauge64 | read-only | current |
| hwIFExtOutputMulticastBitRate OBJECT-TYPE This object indicates the bit rate of the outgoing multicast traffic on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.30 | CounterBasedGauge64 | read-only | current |
| hwIFExtInputBroadcastBitRate OBJECT-TYPE This object indicates the bit rate of the incoming broadcast traffic on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.31 | CounterBasedGauge64 | read-only | current |
| hwIFExtOutputBroadcastBitRate OBJECT-TYPE This object indicates the bit rate of the outgoing broadcast traffic on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.32 | CounterBasedGauge64 | read-only | current |
| hwIFExtInputUnicastPktRate OBJECT-TYPE This object indicates the rate of the incoming unicast packets on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.33 | CounterBasedGauge64 | read-only | current |
| hwIFExtOutputUnicastPktRate OBJECT-TYPE This object indicates the rate of the outgoing unicast packets on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.34 | CounterBasedGauge64 | read-only | current |
| hwIFExtInputMulticastPktRate OBJECT-TYPE This object indicates the rate of the incoming multicast packets on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.35 | CounterBasedGauge64 | read-only | current |
| hwIFExtOutputMulticastPktRate OBJECT-TYPE This object indicates the rate of the outgoing multicast packets on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.36 | CounterBasedGauge64 | read-only | current |
| hwIFExtInputBroadcastPktRate OBJECT-TYPE This object indicates the rate of the incoming broadcast packets on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.37 | CounterBasedGauge64 | read-only | current |
| hwIFExtOutputBroadcastPktRate OBJECT-TYPE This object indicates the rate of the outgoing broadcast packets on an interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.38 | CounterBasedGauge64 | read-only | current |
| hwIFExtPhyStatus OBJECT-TYPE The physical status of member interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.2 | INTEGER {up(1), down(2)} | accessible-for-notify | current |
| hwIFExtMemberOf OBJECT-TYPE The description of the main interface which has the membership with the member interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.3 | DisplayString | accessible-for-notify | current |
| hwLinkModeChangeAutoCreateIfTable OBJECT-TYPE Interface extended table of private mib. | 1.3.6.1.4.1.2011.5.25.41.1.1.4 | not-accessible | current | |
| hwLinkModeChangeAutoCreateIfEntry OBJECT-TYPE Entries of private extended interface table. | 1.3.6.1.4.1.2011.5.25.41.1.1.4.1 | not-accessible | current | |
| hwAutoIfIndex OBJECT-TYPE Index of extended table of interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.4.1.1 | InterfaceIndex | not-accessible | current |
| hwNewIfTimeslot OBJECT-TYPE The time slot of the TDM interface: timeslot0(0):The time slot 0 on the TDM interface, timeslot1(1):The time slot 1 on the TDM interface, timeslot2(2):The time slot 2 on the TDM interface, timeslot3(3):The time slot 3 on the TDM interface, timeslot4(4):The time slot 4 on the TDM interface, timeslot5(5):The time slot 5 on the TDM interface, timeslot6(6):The time slot 6 on the TDM interface, timeslot7(7):The time slot 7 on the TDM interface, timeslot8(8):The time slot 8 on the TDM interface, timeslot9(9):The time slot 9 on the TDM interface, timeslot10(10):The time slot 10 on the TDM interface, timeslot11(11):The time slot 11 on the TDM interface, timeslot12(12):The time slot 12 on the TDM interface, timeslot13(13):The time slot 13 on the TDM interface, timeslot14(14):The time slot 14 on the TDM interface, timeslot15(15):The time slot 15 on the TDM interface, timeslot16(16):The time slot 16 on the TDM interface, timeslot17(17):The time slot 17 on the TDM interface, timeslot18(18):The time slot 18 on the TDM interface, timeslot19(19):The time slot 19 on the TDM interface, timeslot20(20):The time slot 20 on the TDM interface, timeslot21(21):The time slot 21 on the TDM interface, timeslot22(22):The time slot 22 on the TDM interface, timeslot23(23):The time slot 23 on the TDM interface, timeslot24(24):The time slot 24 on the TDM interface, timeslot25(25):The time slot 25 on the TDM interface, timeslot26(26):The time slot 26 on the TDM interface, timeslot27(27):The time slot 27 on the TDM interface, timeslot28(28):The time slot 28 on the TDM interface, timeslot29(29):The time slot 29 on the TDM interface, timeslot30(30):The time slot 30 on the TDM interface, timeslot31(31):The time slot 31 on the TDM interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.4.1.2 | Bits {timeslot0(0), timeslot1(1), timeslot2(2), timeslot3(3), timeslot4(4), timeslot5(5), timeslot6(6), timeslot7(7), timeslot8(8), timeslot9(9), timeslot10(10), timeslot11(11), timeslot12(12), timeslot13(13), timeslot14(14), timeslot15(15), timeslot16(16), timeslot17(17), timeslot18(18), timeslot19(19), timeslot20(20), timeslot21(21), timeslot22(22), timeslot23(23), timeslot24(24), timeslot25(25), timeslot26(26), timeslot27(27), timeslot28(28), timeslot29(29), timeslot30(30), timeslot31(31)} | read-only | current |
| hwIFExtPhyNumber OBJECT-TYPE The number of the physical interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.1.5 | Integer32 | read-only | current |
| hwRemoteIfTable OBJECT-TYPE hwRemoteIfTable is a virtual access interface table. | 1.3.6.1.4.1.2011.5.25.41.1.1.6 | not-accessible | current | |
| hwRemoteIfEntry OBJECT-TYPE Entries of private extended remote interface table. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1 | not-accessible | current | |
| hwRemoteIfIndex OBJECT-TYPE Index of extended table of remote interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.1 | InterfaceIndex | not-accessible | current |
| hwRemoteIfInOctets OBJECT-TYPE The total number of octets received on the interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.2 | Counter64 | read-only | current |
| hwRemoteIfInPkts OBJECT-TYPE The total number of packets received on the interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.3 | Counter64 | read-only | current |
| hwRemoteIfInUcastPkts OBJECT-TYPE The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.4 | Counter64 | read-only | current |
| hwRemoteIfInMulticastPkts OBJECT-TYPE The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.5 | Counter64 | read-only | current |
| hwRemoteIfInBroadcastPkts OBJECT-TYPE The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.6 | Counter64 | read-only | current |
| hwRemoteIfInOctetRate OBJECT-TYPE This object indicates the octet rate of the incoming traffic on an interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.7 | Counter64 | read-only | current |
| hwRemoteIfInPktRate OBJECT-TYPE This object indicates the rate of the incoming packets on an remote interface. The rate value is 64 bits. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.8 | Counter64 | read-only | current |
| hwRemoteIfInErrorPkts OBJECT-TYPE For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.9 | Counter64 | read-only | current |
| hwRemoteIfInDiscardPkts OBJECT-TYPE The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.10 | Counter64 | read-only | current |
| hwRemoteIfOutOctets OBJECT-TYPE The total number of octets transmitted out of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.11 | Counter64 | read-only | current |
| hwRemoteIfOutPkts OBJECT-TYPE The total number of packets transmitted out of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.12 | Counter64 | read-only | current |
| hwRemoteIfOutUcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.13 | Counter64 | read-only | current |
| hwRemoteIfOutMulticastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.14 | Counter64 | read-only | current |
| hwRemoteIfOutBroadcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.15 | Counter64 | read-only | current |
| hwRemoteIfOutOctetRate OBJECT-TYPE This object indicates the octet rate of the outgoing traffic on an interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.16 | Counter64 | read-only | current |
| hwRemoteIfOutPktRate OBJECT-TYPE This object indicates the rate of the outgoing packets on an interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.17 | Counter64 | read-only | current |
| hwRemoteIfOutErrorPkts OBJECT-TYPE For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.18 | Counter64 | read-only | current |
| hwRemoteIfOutDiscardPkts OBJECT-TYPE The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | 1.3.6.1.4.1.2011.5.25.41.1.1.6.1.19 | Counter64 | read-only | current |
| hwIFExtDualFlowRateTable OBJECT-TYPE Interface Second Cycle Rate Table. | 1.3.6.1.4.1.2011.5.25.41.1.1.7 | not-accessible | current | |
| hwIFExtDualFlowRateEntry OBJECT-TYPE An interface second cycle rate entry. | 1.3.6.1.4.1.2011.5.25.41.1.1.7.1 | not-accessible | current | |
| hwIFExtDualFlowIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. | 1.3.6.1.4.1.2011.5.25.41.1.1.7.1.1 | InterfaceIndex | not-accessible | current |
| hwIFExtDualFlowInputPktRate OBJECT-TYPE This object indicates the second rate of the incoming packets on an interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.7.1.2 | Counter64 | read-only | current |
| hwIFExtDualFlowOutputPktRate OBJECT-TYPE This object indicates the second rate of the outgoing packets on an interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.7.1.3 | Counter64 | read-only | current |
| hwIFExtDualFlowInputOctetRate OBJECT-TYPE This object indicates the second octet rate of the incoming traffic on an interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.7.1.4 | Counter64 | read-only | current |
| hwIFExtDualFlowOutputOctetRate OBJECT-TYPE This object indicates the second octet rate of the outgoing traffic on an interface. | 1.3.6.1.4.1.2011.5.25.41.1.1.7.1.5 | Counter64 | read-only | current |
| hwInterfaceIp OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.2 | |||
| hwIfIpTable OBJECT-TYPE hwIfIpTable describes information about IP addresses configured for an interface. On an interface, one primary IP address and multiple secondary IP addresses can be configured. You can create, delete, and view information about the IP addresses of an interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.1 | not-accessible | current | |
| hwIfIpEntry OBJECT-TYPE Interface IP address configuration | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1 | not-accessible | current | |
| hwIpAdEntAddr OBJECT-TYPE The IP address to which this entry's addressing information pertains. | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.1 | IpAddress | read-only | current |
| hwIpAdEntIfIndex OBJECT-TYPE The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.2 | Integer32 | read-create | current |
| hwIpAdEntNetMask OBJECT-TYPE The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0. | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.3 | IpAddress | read-create | current |
| hwIpAdEntBcastAddr OBJECT-TYPE The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.4 | Integer32 | read-only | current |
| hwIpAdEntReasmMaxSize OBJECT-TYPE The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagram received on this interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.5 | Integer32 (0..65535) | read-only | current |
| hwIpAdEntAddressType OBJECT-TYPE The flag indicates whether the IP address is primary IP address. One interface has only one primary IP address, but can have many sub IP address. So when add a primary IP address to an interface that has already a primary IP address, the new primary address will replace old primary address and the old primary address will be deleted. | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.6 | HwIpAddressType | read-create | current |
| hwIfIpMethod OBJECT-TYPE Interface IP address acquiring method. assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration. dhcpIp(2) indicates an address that was assigned to this system by a DHCP server. bootpIp(3) indicates an address that was assigned to this system by the bootp protocol. other(4) indicates an address created by another method. linklayer(5) indicates an address created by IPv6 stateless auto-configuration. random(6) indicates an address chosen by the system at random, for example, an IPv4 address within 169.254/16, or an RFC 3041 privacy address. | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.7 | INTEGER {assignedIp(1), dhcpIp(2), bootpIp(3), other(4), linklayer(5), random(6)} | read-write | current |
| hwIpAdEntAddrStatus OBJECT-TYPE The row status variable. | 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.8 | RowStatus | read-create | current |
| hwIfIpUnnumberedTable OBJECT-TYPE This table lists information about the unnumbered IP address of the interface that borrows an IP address from another interface. You can create, delete, and view information about the borrowed IP address of an interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.2 | not-accessible | current | |
| hwIfIpUnnumberedEntry OBJECT-TYPE Interface IP address unnumbered configuration | 1.3.6.1.4.1.2011.5.25.41.1.2.2.1 | not-accessible | current | |
| hwUnnumberedIfIndex OBJECT-TYPE The index value of the unnumbered interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.1 | InterfaceIndex | not-accessible | current |
| hwLendIfIndex OBJECT-TYPE The index value of the lend interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.11 | InterfaceIndex | read-create | current |
| hwLendIpAddr OBJECT-TYPE The IP address of the lend interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.12 | IpAddress | read-only | current |
| hwLendIpAddrNetMask OBJECT-TYPE The IP address mask of the lend interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.13 | IpAddress | read-only | current |
| hwUnnumberedRowStatus OBJECT-TYPE The row status variable. | 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.51 | RowStatus | read-create | current |
| hwIfIpAddrTable OBJECT-TYPE This table contains addressing information relevant to the entity's interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.2.3 | not-accessible | current | |
| hwIfIpAddrEntry OBJECT-TYPE Interface IP address configuration | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1 | not-accessible | current | |
| hwIfIpAddrEntIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.1 | InterfaceIndex | accessible-for-notify | current |
| hwIfIpAddrEntAddr OBJECT-TYPE The IP address to which this entry's addressing information pertains. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.2 | IpAddress | accessible-for-notify | current |
| hwIfIpAddrEntType OBJECT-TYPE The type of address. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.3 | INTEGER {unicast(1), anycast(2), broadcast(3)} | read-only | current |
| hwIfIpAddrEntPrefix OBJECT-TYPE The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.4 | IpAddress | read-only | current |
| hwIfIpAddrEntOrigin OBJECT-TYPE Interface IP address acquiring method. assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration. dhcpIp(2) indicates an address that was assigned to this system by a DHCP server. bootpIp(3) indicates an address that was assigned to this system by the bootp protocol. other(4) indicates an address created by another method. linklayer(5) indicates an address created by IPv6 stateless auto-configuration. random(6) indicates an address chosen by the system at random, for example, an IPv4 address within 169.254/16, or an RFC 3041 privacy address. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.5 | INTEGER {assignedIp(1), dhcpIp(2), bootpIp(3), other(4), linklayer(5), random(6)} | read-only | current |
| hwIfIpAddrEntStatus OBJECT-TYPE The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1). | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.6 | INTEGER {preferred(1), deprecated(2), invalid(3), inaccessible(4), unknown(5), tentative(6), duplicate(7), optimistic(8)} | read-only | current |
| hwIfIpAddrEntCreated OBJECT-TYPE The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.7 | TimeStamp | read-only | current |
| hwIfIpAddrEntLastChanged OBJECT-TYPE The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.8 | TimeStamp | read-only | current |
| hwIfIpAddrEntBcastAddr OBJECT-TYPE The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.9 | Integer32 | read-only | current |
| hwIfIpAddrEntReasmMaxSize OBJECT-TYPE The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagram received on this interface. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.10 | Integer32 (0..65535) | read-only | current |
| hwIfIpAddrEntAddrType OBJECT-TYPE The flag indicates whether the IP address is primary IP address. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.11 | HwIpAddressType | read-only | current |
| hwIfIpAddrEntVpn OBJECT-TYPE The vpn name of ip address.The public address does not have any value. | 1.3.6.1.4.1.2011.5.25.41.1.2.3.1.12 | DisplayString (SIZE(0..31)) | read-only | current |
| hwTrunkAttr OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.3 | |||
| hwTrunkIfMax OBJECT-TYPE The maximum of Trunk interface | 1.3.6.1.4.1.2011.5.25.41.1.3.1 | Integer32 | read-only | current |
| hwTrunkNextIndex OBJECT-TYPE The nextindex of Trunk interface,that means its position | 1.3.6.1.4.1.2011.5.25.41.1.3.2 | Integer32 | read-only | current |
| hwTrunkIfTable OBJECT-TYPE hwTrunkIfID uniquely identifies this table. It is set when the table is created. This table describes the information about the trunk interface. | 1.3.6.1.4.1.2011.5.25.41.1.3.3 | not-accessible | current | |
| hwTrunkIfEntry OBJECT-TYPE Entries of the trunk table. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1 | not-accessible | current | |
| hwTrunkIndex OBJECT-TYPE The value of this object identifies the index of a trunk interface.The currently supported value ranges from 0 to 511. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.1 | Integer32 | accessible-for-notify | current |
| hwTrunkIfID OBJECT-TYPE The identification of the Trunk interface.It may identify Trunk and is an index of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.2 | Integer32 | read-create | current |
| hwTrunkIfType OBJECT-TYPE The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.3 | INTEGER {ethTrunk(1), ipTrunk(2)} | read-create | current |
| hwTrunkIfIndex OBJECT-TYPE Index number of the Trunk interface,it is consistent with ifIndex of ifTable in IF-MIB. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.4 | InterfaceIndex | read-only | current |
| hwTrunkIfModel OBJECT-TYPE Participated model of interface load. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.5 | INTEGER {invalid(-1), packetAll(1), sourceDesMac(2), packetUdp(3), packetTcp(4), sourceDesIp(5), sourceMacIpv6(6), sourceIpIpv6(7), sourceIp(8), desIp(9), sourceMac(10), desMac(11), sourcePort(12), desPort(13), sourceDesPort(14), fwdType(15), qos(16), labelNum(17), label(18), enhanced(19), l4(20)} | read-create | current |
| hwTrunkIfBandWidthAffectLinkNum OBJECT-TYPE The value of this object identifies the maximum number of trunk interfaces that can be created. By default, the maximum number of trunk interfaces that can be created is 32. This entry can be set only on a Layer 2 interface. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.6 | Integer32 | read-create | current |
| hwTrunkIfMinLinkNum OBJECT-TYPE The value of this object identifies the minimum number of trunk interfaces that can be created. The currently supported value ranges from 1 to 32. By default, the minimum number of trunk interfaces that can be created is 1. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.7 | Integer32 | read-create | current |
| hwTrunkIfRowStatus OBJECT-TYPE Current operation status of the row | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.8 | RowStatus | read-create | current |
| hwTrunkIfWorkingMode OBJECT-TYPE The value of this object identifies the working mode of an Eth-Trunk interface. 1: master/backup access mode 2: normal mode 3: static LACP mode 4: compatible LACP mode 5: backup interface mode | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.9 | INTEGER {invalid(-1), masterBackup(1), normalMode(2), lacpMode(3), lacpCompatibleMode(4), portStandbyMode(5)} | read-create | current |
| hwTrunkIfWorkingState OBJECT-TYPE Current working state of backup-access trunk. 1:general mode working state 2:initialization 3:master working 4:backup working | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.10 | INTEGER {invalid(-1), generalMode(1), initialization(2), masterWorking(3), backupWorking(4)} | read-only | current |
| hwTrunkIfAutoRecover OBJECT-TYPE If auto-recover has been set, the master port will be working instead of the other port when it changes from down state to up state. 1: don't support auto-recover 2: support auto-recover | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.11 | INTEGER {invalid(-1), generalMode(1), autoRecover(2)} | read-create | current |
| hwTrunkIfPreemptEnable OBJECT-TYPE This object indicates whether LACP priority preemption in static mode is enabled. By default, this function is not enabled. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.12 | INTEGER {invalid(-1), enabled(1), disabled(2)} | read-create | current |
| hwTrunkIfPreemptDelay OBJECT-TYPE The value of this object identifies the delay for LACP priority preemption in static mode. You can set this object only after hwTrunkIfPreemptEnable is enabled. The value ranges from 10 to 180, in seconds. The default value is 30s. If LACP is not configured, the value of -1 is used. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.13 | Integer32 (0..180 | -1) | read-create | current |
| hwTrunkIfTimeoutReceive OBJECT-TYPE The value of this object identifies the timeout period for receiving LACPDUs on an interface in static LACP mode. The value can be: fast: specifies the timeout period for receiving packets to be 3s. slow: specifies the timeout period for receiving packets to be 90s. The default timeout period for receiving packets is 3s. fast(1),slow(2). The return value of -1 indicates invalid. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.14 | INTEGER {invalid(-1), fast(1), slow(2)} | read-create | current |
| hwTrunkIfFlushSendEnable OBJECT-TYPE Whether or not permit the trunk to transmit FlushDUs.It is only used when it is in the handwork 1:1 mode.Once it is enabled, the newly active interface in the trunk will send SmartLink FlushDUs so as to delete the related MAC forwarding table of the layer2 equipment in network.Otherwise, SmartLink FlushDUs will not be sent. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.15 | INTEGER {invalid(-1), enabled(1), disabled(2)} | read-create | current |
| hwTrunkIfFlushVlanId OBJECT-TYPE The ID of Vlan the partner port belongs to.When it is 0, it indicates the function of sending FlushPDU is disabled. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.16 | Integer32 (0..4094 | -1) | read-create | current |
| hwTrunkIfFlushPasswd OBJECT-TYPE A 16-octet read-create value used to define the password for negotiation. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.17 | SnmpPasswdString | read-create | current |
| hwTrunkIfForceSwitchEnable OBJECT-TYPE It is only used when it is in the handwork 1:1 mode and the current working link is the backup link. At that time, working link will move from backup link to master link. However, if the master link is down, the operation will be forbidden. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.18 | INTEGER {invalid(-1), enabled(1)} | read-create | current |
| hwTrunkIfStatReset OBJECT-TYPE Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for all the ports in the current trunk. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.19 | INTEGER {invalid(-1), reset(1), ready(2)} | read-create | current |
| hwTrunkBandwidth OBJECT-TYPE Current bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.20 | Integer32 | read-create | current |
| hwTrunkIfArpSendSpeed OBJECT-TYPE Indicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.21 | Integer32 (800..3000 | -1) | read-create | current |
| hwTrunkIfLagSelectedPortStd OBJECT-TYPE This object indicates the port selection standard of LACP: based either on the port rate or on the port priority. By default, LACP selects ports based on the port priority. speed(1),priority(2). If LACP is not configured, the return value is invalid(-1). | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.22 | INTEGER {invalid(-1), speed(1), priority(2)} | read-create | current |
| hwTrunkIfLagMaxActiveLinkNum OBJECT-TYPE The value of this object identifies the upper threshold of interfaces that can be selected by the Eth-Trunk in static mode. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.23 | Integer32 | read-create | current |
| hwTrunkETrunkPriority OBJECT-TYPE The priority of the E-Trunk. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.24 | Integer32 (0..65535 | -1) | read-write | current |
| hwTrunkETrunkSysID OBJECT-TYPE The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.25 | PhysAddress | read-write | current |
| hwTrunkETrunkPriorityReset OBJECT-TYPE Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk priority is resetted. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.26 | INTEGER {invalid(-1), yes(1), no(2)} | read-write | current |
| hwTrunkETrunkSysIDReset OBJECT-TYPE Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk system ID is resetted. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.27 | INTEGER {invalid(-1), yes(1), no(2)} | read-write | current |
| hwTrunkLocalPrefMode OBJECT-TYPE Local-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is enable(1). | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.28 | INTEGER {enable(1), disable(2)} | read-write | current |
| hwTrunkIfTrackVrrpVrid OBJECT-TYPE The VRID which the static mode Eth-trunk tracked to. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.29 | Integer32 | read-write | current |
| hwTrunkIfTrackVrrpIfIndex OBJECT-TYPE The VRRP interface which the static mode Eth-trunk tracked to. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.30 | InterfaceIndex | read-write | current |
| hwTrunkIfTrackVrrpReset OBJECT-TYPE Status of operation, there are yes(1) and no(2). The value of this object identifies whether the operation of clearing the configuration is performed. And the configuration is that the Eth-Trunk interface in static LACP mode is associated with an mVRRP backup group. The value yes(1) indicates performing the operation. This object indicates one operation but not one status, so when the operation is performed, the value is no(2). By default, the value is no(2). | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.31 | INTEGER {invalid(-1), yes(1), no(2)} | read-write | current |
| hwTrunkIfBackupPreemptEnable OBJECT-TYPE The preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode. In default condition, the preemption is disabled. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.32 | EnabledStatus | read-write | current |
| hwTrunkIfBackupPreemptDelay OBJECT-TYPE The waiting time for priority preemption; Unit: minute. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operation of preemption will be delayed for hwTrunkIfBackupPreemptDelay time. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.33 | Integer32 (0..30 | -1) | read-write | current |
| hwTrunkIfCrcErrorSwitchEnable OBJECT-TYPE make trunk member port stop in use if the port have crc error exceed the config threshold, the trunk would be down if member port in use is low | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.34 | EnabledStatus | read-create | current |
| hwTrunkIfLagTimeOut OBJECT-TYPE The expired time(Unit is second) of the port to receive LACPDUS in the fast mode. The hwTrunkIfTimeoutReceive is the type of timeout and use hwTrunkIfLagTimeOut to change time in the fast mode. The default value is customized with products. If the mode is not fast, the value is always 0. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.35 | Integer32 (3..90 | 0) | read-write | current |
| hwTrunkMemCount OBJECT-TYPE The count of Trunk member interfaces per Trunk. | 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.36 | Integer32 | read-only | current |
| hwTrunkSystemPriority OBJECT-TYPE The value of this object identifies the system priority defined in the Link Aggregation Control Protocol (LACP). | 1.3.6.1.4.1.2011.5.25.41.1.3.4 | Integer32 (0..65535) | read-write | current |
| hwTrunkUnknownUnicastIfModel OBJECT-TYPE Participated model of load for unknown unicast. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic. | 1.3.6.1.4.1.2011.5.25.41.1.3.5 | INTEGER {packetAll(1), sourceDesMac(2), packetUdp(3), packetTcp(4), sourceDesIp(5), sourceMacIpv6(6), sourceIpIpv6(7), sourceIp(8), desIp(9), sourceMac(10), desMac(11), sourcePort(12), desPort(13), sourceDesPort(14), label(15), ipOrLabel(16)} | read-write | current |
| hwTrunkETrunkSystemPriority OBJECT-TYPE The system priority of the E-Trunk. | 1.3.6.1.4.1.2011.5.25.41.1.3.6 | Integer32 (0..65535) | read-write | current |
| hwTrunkETrunkSystemID OBJECT-TYPE The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default. | 1.3.6.1.4.1.2011.5.25.41.1.3.7 | PhysAddress | read-write | current |
| hwTrunkCount OBJECT-TYPE Number of configured trunk interfaces on the device. | 1.3.6.1.4.1.2011.5.25.41.1.3.8 | Integer32 (0..65535) | read-only | current |
| hwTrunkMemberCountUpperThreshold OBJECT-TYPE Upper threshold for the number of members of the Eth-Trunk in LACP mode. | 1.3.6.1.4.1.2011.5.25.41.1.3.9 | Integer32 (0..65535) | accessible-for-notify | current |
| hwTrunkMemberCountLowerThreshold OBJECT-TYPE Lower threshold for the number of members of the Eth-Trunk in LACP mode. | 1.3.6.1.4.1.2011.5.25.41.1.3.10 | Integer32 (0..65535) | accessible-for-notify | current |
| hwTrunkSubinterfacesCount OBJECT-TYPE Number of configured trunk sub-interfaces on the device. | 1.3.6.1.4.1.2011.5.25.41.1.3.11 | Integer32 | read-only | current |
| hwTrunkSubinterfacesLimit OBJECT-TYPE Specification of trunk sub-interfaces on the device. | 1.3.6.1.4.1.2011.5.25.41.1.3.12 | Integer32 | read-only | current |
| hwTrunkMemAttr OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.4 | |||
| hwTrunkMemTable OBJECT-TYPE hwTrunkMemifIndex uniquely identifies this table. It is set when the table is created. This table describes the information about the trunk members. | 1.3.6.1.4.1.2011.5.25.41.1.4.1 | not-accessible | current | |
| hwTrunkMemEntry OBJECT-TYPE Trunk member attribute information | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1 | not-accessible | current | |
| hwTrunkMemifIndex OBJECT-TYPE The value of this object identifies the index of a trunk member interface. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.1 | Integer32 | accessible-for-notify | current |
| hwTrunkValidEntry OBJECT-TYPE The value of this object identifies the valid flag in the trunk. If the trunk has member interfaces added, the return value is valid(1). | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.2 | INTEGER {valid(1), invalid(2)} | read-only | current |
| hwTrunkSelectStatus OBJECT-TYPE The value of this object identifies the status of a trunk. trunkSelected: A trunk member interface in this state can both forward data and receive LACPDUs from a remote device. trunkDeselected: A trunk member interface in this state cannot forward data. trunkIndep: A trunk member interface in this state can forward data but cannot receive LACPDUs from a remote device. This state applies only to Eth-Trunk interfaces that work in dynamic LACP mode. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.3 | INTEGER {invalid(-1), trunkSelected(1), trunkDeselected(2), trunkIndep(3)} | read-create | current |
| hwTrunkLacpStatus OBJECT-TYPE This object indicates the LACP status. enabled: An Eth-Trunk interface works in static LACP mode. disabled: An Eth-Trunk interface does not work in static LACP mode. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.4 | EnabledStatus | read-only | current |
| hwTrunkDeleteFlag OBJECT-TYPE Flag is set trunk_del_enable(1) or trunk_del_disable(2), according to operation. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.5 | EnabledStatus | read-create | current |
| hwTrunkOperstatus OBJECT-TYPE Status of operation, indicates port status. There are trunk_up(1) and trunk_down(2).It expresses whether port is shutdown. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| hwTrunkIsDefaultLagRecv OBJECT-TYPE We don't sustain now, default value is false. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.7 | TruthValue | read-only | current |
| hwTrunkPortWeight OBJECT-TYPE The value of this object identifies the weight of a trunk member interface. The default weight of a Trunk member interface is 1. The sum weight of all member interfaces of a trunk cannot exceed the maximum number of member interfaces that a trunk supports. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.8 | Unsigned32 | read-create | current |
| hwTrunkPortStandby OBJECT-TYPE The value is backup of Trunk Port. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.9 | Unsigned32 | read-create | current |
| hwTrunkRowStatus OBJECT-TYPE Current operation status of the row. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.10 | RowStatus | read-create | current |
| hwTrunkPortMaster OBJECT-TYPE Master port of backup-access eth-trunk or not 1: port-slave 2: port-master | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.11 | INTEGER {invalid(-1), portSlave(1), portMaster(2)} | read-create | current |
| hwTrunkPortPriority OBJECT-TYPE The priority value assigned to this Trunk Port. This 16-bit value is read-write. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.12 | Integer32 (0..65535 | -1) | read-create | current |
| hwTrunkPortStatReset OBJECT-TYPE This object indicates resetting LACPDU statistics on an interface. This object applies only to Eth-Trunk interfaces in static LACP mode. For Eth-Trunk interfaces in other modes, the return value is fixed at -1. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.13 | INTEGER {invalid(-1), reset(1), ready(2)} | read-create | current |
| hwTrunkPortLacpMode OBJECT-TYPE The mode of port joining Lacp. | 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.14 | INTEGER {invalid(1), active(2), passive(3)} | read-create | current |
| hwIFFlowStat OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.5 | |||
| hwIFFlowStatGlobalInterval OBJECT-TYPE Global interval of interface flow stat.The interface interval is effective, when both interface interval and global interval are config.Globle interval is only effective in interfaces,which interface interval is not configged. Flow stat rate of interface will be affected by the value of interval. The default value is 300s. | 1.3.6.1.4.1.2011.5.25.41.1.5.1 | Integer32 (10..600) | read-write | current |
| hwIfStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.6 | |||
| hwIfEtherStatTable OBJECT-TYPE This table describes attributes of Ethernet interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.6.1 | not-accessible | current | |
| hwIfEtherStatEntry OBJECT-TYPE Entry of Ethernet Interface Statistic Table | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1 | not-accessible | current | |
| hwIfEtherStatIfIndex OBJECT-TYPE This object indicates the index of a Layer 2 interface. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.1 | InterfaceIndex | not-accessible | current |
| hwIfEtherStatInPkts64Octets OBJECT-TYPE This object indicates the number of received data packets each with a length less than or equal to 64 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.5 | Counter64 | read-only | current |
| hwIfEtherStatInPkts65to127Octets OBJECT-TYPE This object indicates the number of received data packets each with a length ranging from 65 bytes to 127 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.6 | Counter64 | read-only | current |
| hwIfEtherStatInPkts128to255Octets OBJECT-TYPE This object indicates the number of received data packets each with a length ranging from 128 bytes to 255 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.7 | Counter64 | read-only | current |
| hwIfEtherStatInPkts256to511Octets OBJECT-TYPE This object indicates the number of received data packets each with a length ranging from 256 bytes to 511 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.8 | Counter64 | read-only | current |
| hwIfEtherStatInPkts512to1023Octets OBJECT-TYPE This object indicates the number of received data packets each with a length ranging from 512 bytes to 1023 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.9 | Counter64 | read-only | current |
| hwIfEtherStatInPkts1024to1518Octets OBJECT-TYPE This object indicates the number of received data packets each with a length ranging from 1024 bytes to 1518 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.10 | Counter64 | read-only | current |
| hwIfEtherStatInJumboPkts OBJECT-TYPE This object indicates the number of received data packets each with a length greater than 1518 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.11 | Counter64 | read-only | current |
| hwIfEtherStatInCRCPkts OBJECT-TYPE This object indicates the number of packets experiencing the CRC error check. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.12 | Counter64 | read-only | current |
| hwIfEtherStatInLongPkts OBJECT-TYPE This object indicates the number of packets each with a length greater than the maximum length. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.13 | Counter64 | read-only | current |
| hwIfEtherStatInJabberPkts OBJECT-TYPE This object indicates the number of packets each with a length greater than the maximum length and experiencing the CRC error check. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.14 | Counter64 | read-only | current |
| hwIfEtherStatInFragmentPkts OBJECT-TYPE This object indicates the number of data packets each with a length shorter than 64 bytes and experiencing the CRC error check. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.15 | Counter64 | read-only | current |
| hwIfEtherStatInUnderSizePkts OBJECT-TYPE This object indicates the number of data packets each with a length shorter than 64 bytes and without experiencing the CRC error check. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.16 | Counter64 | read-only | current |
| hwIfEtherStatInOverRunPkts OBJECT-TYPE This object indicates the number of received data packets with FIFO overflow errors. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.17 | Counter64 | read-only | current |
| hwIfEtherStatInPausePkts OBJECT-TYPE This object indicates the number of received control frames. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.18 | Counter64 | read-only | current |
| hwIfEtherStatOutJumboPkts OBJECT-TYPE This object indicates the number of sent packets each with a length greater than 1518 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.19 | Counter64 | read-only | current |
| hwIfEtherStatOutOverflowPkts OBJECT-TYPE This object indicates the number of sent data packets with FIFO overflow errors. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.20 | Counter64 | read-only | current |
| hwIfEtherStatOutUnderRunPkts OBJECT-TYPE This object indicates the number of data packets with an empty FIFO. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.21 | Counter64 | read-only | current |
| hwIfEtherStatOutPausePkts OBJECT-TYPE This object indicates the number of sent control frames. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.22 | Counter64 | read-only | current |
| hwIfEthIfStatReset OBJECT-TYPE Reset the Statistic information Counter | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.23 | INTEGER {reset(1), ready(2)} | read-write | current |
| hwIfEtherStatInDropEventPkts OBJECT-TYPE The number of received Packets discarded for GBP full or back pressure discard | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.24 | Counter64 | read-only | current |
| hwIfEtherStatInAlignmentPkts OBJECT-TYPE This object indicates the number of received packets with error headers. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.25 | Counter64 | read-only | current |
| hwIfEtherStatInSymbolPkts OBJECT-TYPE This object indicates the number of received unknown packets. | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.26 | Counter64 | read-only | current |
| hwIfEtherStatInIgnoredPkts OBJECT-TYPE The number of received MAC control frames which have unknown opecode | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.27 | Counter64 | read-only | current |
| hwIfEtherStatInFramePkts OBJECT-TYPE The number of received frames whose actual length differs with 802.3 | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.28 | Counter64 | read-only | current |
| hwIfEtherStatOutCollisionPkts OBJECT-TYPE The number of sended collision Frames(only happen in the 10/100M port with half duplex mode) | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.29 | Counter64 | read-only | current |
| hwIfEtherStatOutDeferredPkts OBJECT-TYPE The number of sended deferred but not collision Frames(only happen in the 10/100M port) | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.30 | Counter64 | read-only | current |
| hwIfEtherStatOutLateCollisionPkts OBJECT-TYPE The number of sended deferred and collision Frames(only happen in the 10/100M port) | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.31 | Counter64 | read-only | current |
| hwIfEtherStatOutExcessiveCollisionPkts OBJECT-TYPE The number of sended failure Frames whose collision more than 16(only happen in the 10/100M port) | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.32 | Counter64 | read-only | current |
| hwIfEtherStatOutBufferPurgationPkts OBJECT-TYPE The number of sended Frames which is purged from the buffer because of long time | 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.33 | Counter64 | read-only | current |
| hwIfSdhStatTable OBJECT-TYPE This table describes attributes of SDH interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.6.2 | not-accessible | current | |
| hwIfSdhStatEntry OBJECT-TYPE Entry of Sdh/Sonet Interface Statistic Table | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1 | not-accessible | current | |
| hwIfSdhStatIfIndex OBJECT-TYPE This object indicates the SDH interface index. | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.1 | InterfaceIndex | not-accessible | current |
| hwIfSdhStatInCRCPkts OBJECT-TYPE This object indicates the number of CRC errors in received packets. | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.2 | Counter64 | read-only | current |
| hwIfSdhStatInShortPkts OBJECT-TYPE This object indicates the number of received packets with the length less than the minimum length allowed. | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.3 | Counter64 | read-only | current |
| hwIfSdhStatInLongPkts OBJECT-TYPE This object indicates the number of received packets with the length greater than the maximum length allowed. | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.4 | Counter64 | read-only | current |
| hwIfSdhStatOutOverRunPkts OBJECT-TYPE This object indicates the number of sent packets with overflow errors. | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.5 | Counter64 | read-only | current |
| hwIfSdhStatOutUnderRunPkts OBJECT-TYPE This object indicates the number of sent packets with underrun errors. | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.6 | Counter64 | read-only | current |
| hwIfSdhIfStatReset OBJECT-TYPE Reset the Statistic information Counter | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.7 | INTEGER {reset(1), ready(2)} | read-write | current |
| hwIfSdhStatInOverRunPkts OBJECT-TYPE The number of received Packets whose queue overflow | 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.8 | Counter64 | read-only | current |
| hwIfAtmStatTable OBJECT-TYPE This table contains ATM interface attributes. | 1.3.6.1.4.1.2011.5.25.41.1.6.3 | not-accessible | current | |
| hwIfAtmStatEntry OBJECT-TYPE Entry of Atm Interface Statistic Table | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1 | not-accessible | current | |
| hwIfAtmStatIfIndex OBJECT-TYPE This object indicates the interface index. | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.1 | InterfaceIndex | not-accessible | current |
| hwIfAtmStatInGoodCells OBJECT-TYPE This object indicates the number of received normal cells. | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.2 | Counter64 | read-only | current |
| hwIfAtmStatInIdleCells OBJECT-TYPE This object indicates the number of received idle cells. | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.3 | Counter64 | read-only | current |
| hwIfAtmStatInCorrectedCells OBJECT-TYPE This object indicates the number of received corrected cells. | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.4 | Counter64 | read-only | current |
| hwIfAtmStatInUncorrectedCells OBJECT-TYPE This object indicates the number of received cells that cannot be corrected. | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.5 | Counter64 | read-only | current |
| hwIfAtmStatOutGoodCells OBJECT-TYPE This object indicates the number of sent normal cells. | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.6 | Counter64 | read-only | current |
| hwIfAtmStatOutIdleCells OBJECT-TYPE This object indicates the number of sent idle cells. | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.7 | Counter64 | read-only | current |
| hwIfAtmIfStatReset OBJECT-TYPE This object indicates the resetting of the counter. | 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.8 | INTEGER {reset(1), ready(2)} | read-write | current |
| hwIfPPPHDLCStatTable OBJECT-TYPE Serial Interface Statistic Table for PPP/HDLC | 1.3.6.1.4.1.2011.5.25.41.1.6.4 | not-accessible | current | |
| hwIfPPPHDLCStatEntry OBJECT-TYPE This table describes PPP or HDLC interface statistics. | 1.3.6.1.4.1.2011.5.25.41.1.6.4.1 | not-accessible | current | |
| hwIfPPPHDLCStatIfIndex OBJECT-TYPE This object indicates the serial interface index. | 1.3.6.1.4.1.2011.5.25.41.1.6.4.1.1 | InterfaceIndex | not-accessible | current |
| hwIfPPPHDLCStatInCRCPkts OBJECT-TYPE This object indicates the number of received data packets that experience a CRC check. | 1.3.6.1.4.1.2011.5.25.41.1.6.4.1.2 | Counter64 | read-only | current |
| hwIfPPPHDLCStatInShortPkts OBJECT-TYPE This object indicates the number of received data packets with each length less than the minimum length of 1 byte. | 1.3.6.1.4.1.2011.5.25.41.1.6.4.1.3 | Counter64 | read-only | current |
| hwIfPPPHDLCStatInLongPkts OBJECT-TYPE This object indicates the number of received data packets with each length greater than the maximum length of 2036 bytes. | 1.3.6.1.4.1.2011.5.25.41.1.6.4.1.4 | Counter64 | read-only | current |
| hwIfDualStackStatsTable OBJECT-TYPE Interface Statistic Table for IPv4/IPv6. | 1.3.6.1.4.1.2011.5.25.41.1.6.5 | not-accessible | current | |
| hwIfDualStackStatsEntry OBJECT-TYPE An interface statistics entry containing objects for a particular interface and version of IPv4/IPv6. | 1.3.6.1.4.1.2011.5.25.41.1.6.5.1 | not-accessible | current | |
| hwIfDualStackStatsIPVersion OBJECT-TYPE The IP version of this row. | 1.3.6.1.4.1.2011.5.25.41.1.6.5.1.1 | InetVersion | not-accessible | current |
| hwIfDualStackStatsIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. | 1.3.6.1.4.1.2011.5.25.41.1.6.5.1.2 | InterfaceIndex | not-accessible | current |
| hwIfDualStackStatsInReceives OBJECT-TYPE The total number of IPv4/IPv6 datagrams received, including those received on the interface's sub-interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.6.5.1.3 | Counter64 | read-only | current |
| hwIfDualStackStatsInOctets OBJECT-TYPE The total number of octets in received IPv4/IPv6 datagrams, including those received on the interface's sub-interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.6.5.1.4 | Counter64 | read-only | current |
| hwIfDualStackStatsOutTransmits OBJECT-TYPE The total number of IPv4/IPv6 datagrams delivered to the lower layers for transmission, including those transmitted on the interface's sub-interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.6.5.1.5 | Counter64 | read-only | current |
| hwIfDualStackStatsOutOctets OBJECT-TYPE The total number of octets in IPv4/IPv6 datagrams delivered to the lower layers for transmission, including those transmitted on the interface's sub-interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.6.5.1.6 | Counter64 | read-only | current |
| hwIfMonitorObject OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.7 | |||
| hwIfMonitorThresholdTable OBJECT-TYPE Alarm monitor table | 1.3.6.1.4.1.2011.5.25.41.1.7.1 | not-accessible | current | |
| hwIfMonitorThresholdEntry OBJECT-TYPE Entry of alarm monitor table | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1 | not-accessible | current | |
| hwIfMonitorIndex OBJECT-TYPE Index of alarm monitor table | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.1 | InterfaceIndex | not-accessible | current |
| hwIfMonitorCrcErrorStatistics OBJECT-TYPE Crc error statistics value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.2 | Counter64 | read-only | current |
| hwIfMonitorCrcErrorThreshold OBJECT-TYPE Crc error alarm threshold,default value is 3 and 0 is an invalid value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.3 | Unsigned32 (0..4294967295) | read-write | current |
| hwIfMonitorCrcErrorInterval OBJECT-TYPE Crc error alarm interval time(unit is second),default value is 10s and 0 is an invalid value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.4 | Integer32 (0..65535) | read-write | current |
| hwIfMonitorSdhErrorStatistics OBJECT-TYPE Sdh error statistics value only for B3 | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.5 | Counter64 | read-only | current |
| hwIfMonitorSdhErrorThreshold OBJECT-TYPE Sdh error alarm threshold,only for B3,default value is 3 and 0 is an invalid value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.6 | Unsigned32 (0..4294967295) | read-write | current |
| hwIfMonitorSdhErrorInterval OBJECT-TYPE Sdh error alarm interval time(unit is second),only for B3,default value is 10s and 0 is an invalid value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.7 | Integer32 (0..65535) | read-write | current |
| hwIfMonitorInputRate OBJECT-TYPE Input rate percentage value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.8 | Integer32 (0..100) | read-only | current |
| hwIfMonitorInputRateThreshold OBJECT-TYPE Input rate alarm threshold,default value is 100 | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.9 | Integer32 (1..100) | read-write | current |
| hwIfMonitorOutputRate OBJECT-TYPE Output rate percentage value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.10 | Integer32 (0..100) | read-only | current |
| hwIfMonitorOutputRateThreshold OBJECT-TYPE Output rate alarm threshold,default value is 100 | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.11 | Integer32 (1..100) | read-write | current |
| hwIfMonitorPauseFrameStatistics OBJECT-TYPE Pause frame statistics value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.12 | Counter64 | read-only | current |
| hwIfMonitorPauseFrameThreshold OBJECT-TYPE Pause frame alarm threshold,and 0 is an invalid value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.13 | Unsigned32 (0..4294967295) | read-write | current |
| hwIfMonitorPauseFrameInterval OBJECT-TYPE Pause frame alarm interval time(unit is second),and 0 is an invalid value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.14 | Integer32 (0..65535) | read-write | current |
| hwIfMonitorDelayValue OBJECT-TYPE Delay value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.15 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorDelayThreshold OBJECT-TYPE Delay alarm threshold | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.16 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorJitterValue OBJECT-TYPE Jitter value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.17 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorJitterThreshold OBJECT-TYPE Jitter alarm threshold | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.18 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorName OBJECT-TYPE Interface's name of alarm monitor table | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.19 | DisplayString | read-only | current |
| hwIfMonitorSdhB1ErrorStatistics OBJECT-TYPE Sdh B1 error statistics value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.20 | Counter64 | read-only | current |
| hwIfMonitorSdhB1ErrorThreshold OBJECT-TYPE Sdh B1 error alarm threshold,default value is 3 | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.21 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorSdhB1ErrorInterval OBJECT-TYPE Sdh B1 error alarm interval time(unit is second),default value is 10s | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.22 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorSdhB2ErrorStatistics OBJECT-TYPE Sdh B2 error statistics value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.23 | Counter64 | read-only | current |
| hwIfMonitorSdhB2ErrorThreshold OBJECT-TYPE Sdh error B2 alarm threshold,default value is 3 | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.24 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorSdhB2ErrorInterval OBJECT-TYPE Sdh B2 error alarm interval time(unit is second),default value is 10s | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.25 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorSymbolErrorStatistics OBJECT-TYPE Symbol error statistics value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.26 | Counter64 | read-only | current |
| hwIfMonitorSymbolErrorThreshold OBJECT-TYPE Symbol error alarm threshold,default value is 3 | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.27 | Unsigned32 (0..4294967295) | read-write | current |
| hwIfMonitorSymbolErrorInterval OBJECT-TYPE Symbol error alarm interval time(unit is second),default value is 10s | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.28 | Integer32 (1..65535) | read-write | current |
| hwIfMonitorAllStatistics OBJECT-TYPE All statistics value | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.29 | Unsigned32 | read-only | current |
| hwIfMonitorBadBytesErrorStatistics OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.40 | Counter64 | read-only | current |
| hwIfMonitorBadBytesErrorThreshold OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.41 | Integer32 | read-write | current |
| hwIfMonitorBadBytesErrorInterval OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.42 | Integer32 | read-write | current |
| hwIfMonitorTxPauseFrameStatistics OBJECT-TYPE TX pause frame statistics value. | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.43 | Counter64 | read-only | current |
| hwIfMonitorTxPauseFrameHighThreshold OBJECT-TYPE TX pause frame high threshold, and 0 is an invalid value. | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.44 | Unsigned32 (0..4294967295) | read-write | current |
| hwIfMonitorTxPauseFrameLowThreshold OBJECT-TYPE TX pause frame low threshold, and 0 is an invalid value. | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.45 | Unsigned32 (0..4294967295) | read-write | current |
| hwIfMonitorTxPauseFrameInterval OBJECT-TYPE TX pause frame alarm interval time(unit is second), and 0 is an invalid value. | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.46 | Integer32 (0..65535) | read-write | current |
| hwIfMonitorPostFECErrorStatistics OBJECT-TYPE Post fec error corrected value. | 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.47 | Counter64 | read-only | current |
| hwIfMonitorGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.8 | |||
| hwIfMonitorCrcEnabledStatus OBJECT-TYPE Enalbe or disable the crc error monitor, and the default value is disable. | 1.3.6.1.4.1.2011.5.25.41.1.8.1 | EnabledStatus | read-write | current |
| hwIfMonitorSdhEnabledStatus OBJECT-TYPE Enalbe or disable the sdh error monitor, and the default value is disable. | 1.3.6.1.4.1.2011.5.25.41.1.8.2 | EnabledStatus | read-write | current |
| hwIfMonitorInputRateEnabledStatus OBJECT-TYPE Enalbe or disable the input rate monitor, and the default value is disable. | 1.3.6.1.4.1.2011.5.25.41.1.8.3 | EnabledStatus | read-write | current |
| hwIfMonitorOutputRateEnabledStatus OBJECT-TYPE Enalbe or disable the output rate monitor, and the default value is disable. | 1.3.6.1.4.1.2011.5.25.41.1.8.4 | EnabledStatus | read-write | current |
| hwIfMonitorHalfDuplexEnabledStatus OBJECT-TYPE Enalbe or disable the half duplex monitor, and the default value is disable. | 1.3.6.1.4.1.2011.5.25.41.1.8.5 | EnabledStatus | read-write | current |
| hwIfMonitorPauseRisingEnabledStatus OBJECT-TYPE Enalbe or disable the pause frame rising monitor, and the default value is disable. | 1.3.6.1.4.1.2011.5.25.41.1.8.6 | EnabledStatus | read-write | current |
| hwIfMonitorPauseContinuingEnabledStatus OBJECT-TYPE Enalbe or disable the pause frame continuing monitor, and the default value is disable. | 1.3.6.1.4.1.2011.5.25.41.1.8.7 | EnabledStatus | read-write | current |
| hwifMonitorBadBytesEnabledStatus OBJECT-TYPE Description. | 1.3.6.1.4.1.2011.5.25.41.1.8.8 | EnabledStatus | read-write | current |
| hwAdminVrrpMemberIf OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.9 | |||
| hwIfFlowChangeTime OBJECT-TYPE The time indicates when the interface's flow status changes. | 1.3.6.1.4.1.2011.5.25.41.1.9.1 | Integer32 | accessible-for-notify | obsolete |
| hwAdminVrrpMemberIfTable OBJECT-TYPE The interface bound to VRRP table. | 1.3.6.1.4.1.2011.5.25.41.1.9.2 | not-accessible | obsolete | |
| hwAdminVrrpMemberIfEntry OBJECT-TYPE Entries of the interface bound to VRRP table. | 1.3.6.1.4.1.2011.5.25.41.1.9.2.1 | not-accessible | obsolete | |
| hwAdminVrrpMemberIfIndex OBJECT-TYPE The number of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.1 | InterfaceIndex | not-accessible | obsolete |
| hwAdminVrrpVrid OBJECT-TYPE The administrator VRRP vrid. | 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.2 | Integer32 | read-create | obsolete |
| hwAdminVrrpIfIndex OBJECT-TYPE The administrator VRRP's configure interface index. | 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.3 | InterfaceIndex | read-create | obsolete |
| hwAdminVrrpMemberIfFlowStatus OBJECT-TYPE Current flow status of interface. 1:up 2:down | 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.4 | INTEGER {up(1), down(2)} | read-only | obsolete |
| hwAdminVrrpMemberIfRowStatus OBJECT-TYPE Current operation status of the row. | 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.5 | RowStatus | read-create | obsolete |
| hwIfFluxLimit OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.10 | |||
| hwIfFluxLimitTable OBJECT-TYPE Flux limit table | 1.3.6.1.4.1.2011.5.25.41.1.10.1 | not-accessible | current | |
| hwIfFluxLimitEntry OBJECT-TYPE Entry of flux limit table | 1.3.6.1.4.1.2011.5.25.41.1.10.1.1 | not-accessible | current | |
| hwIfFluxIfIndex OBJECT-TYPE Interface Index, same as ifIndex. | 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.1 | InterfaceIndex | not-accessible | current |
| hwIfFluxVlanId OBJECT-TYPE Vlan ID. 0 is the default value | 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.2 | VlanIdOrNone | not-accessible | current |
| hwIfFluxDirection OBJECT-TYPE Limit direction: inbound (1) outbound (2) | 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.3 | HWDirectionType | read-create | current |
| hwIfFluxLimitType OBJECT-TYPE Flux limit type: broadcastSuppression(1),multicastSuppression(2),unknownUnicastSuppression(3). | 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.4 | INTEGER {broadcastSuppression(1), multicastSuppression(2), unknownUnicastSuppression(3)} | read-create | current |
| hwIfFluxCir OBJECT-TYPE Committed Information Rate. Unit: kbps. software QoS: 8..155000 hardware QoS: 100..10000000 | 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.5 | Integer32 | read-create | current |
| hwIfFluxCbs OBJECT-TYPE Committed Burst Size. Unit: byte software QoS: 1875..19375000 hardware QoS: 64..33554432 | 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.6 | Integer32 | read-create | current |
| hwIfFluxRowStatus OBJECT-TYPE RowStatus. Three actions are used: active, createAndGo, destroy | 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.7 | RowStatus | read-create | current |
| hwIfDiffServ OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.11 | |||
| hwIfDiffServTable OBJECT-TYPE The table describes the different service mode of interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.11.1 | not-accessible | current | |
| hwIfDiffServEntry OBJECT-TYPE Interface different service mode attribute configuration. | 1.3.6.1.4.1.2011.5.25.41.1.11.1.1 | not-accessible | current | |
| hwIfDiffServIndex OBJECT-TYPE The index of L2 interface. | 1.3.6.1.4.1.2011.5.25.41.1.11.1.1.1 | InterfaceIndex | not-accessible | current |
| hwIfDiffServMode OBJECT-TYPE Different service mode of the interface binding to a VLL, default is uniform. | 1.3.6.1.4.1.2011.5.25.41.1.11.1.1.2 | INTEGER {pipe(1), uniform(2), shortpipe(3), egresspipe(4), egressshortpipe(5), egressShortpipeTrustInnerVlan8021p(6), egressShortpipeTrustIpDscp(7)} | read-only | current |
| hwIfDiffServServiceClass OBJECT-TYPE PHB in the ingress PE, the value must be be,af1,af2,af3,af4,ef,cs6,cs7. | 1.3.6.1.4.1.2011.5.25.41.1.11.1.1.3 | INTEGER {default(0), be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)} | read-only | current |
| hwIfDiffServColor OBJECT-TYPE Remarked color of packet in the ingress PE, the value must be green,yellow,red. | 1.3.6.1.4.1.2011.5.25.41.1.11.1.1.4 | INTEGER {default(0), green(1), yellow(2), red(3)} | read-only | current |
| hwIfQuery OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.12 | |||
| hwIfQueryTable OBJECT-TYPE This table describes interface index information obtained based on the interface name. Currently, this table supports only the query function. | 1.3.6.1.4.1.2011.5.25.41.1.12.1 | not-accessible | current | |
| hwIfQueryEntry OBJECT-TYPE Entries of private interface name table. | 1.3.6.1.4.1.2011.5.25.41.1.12.1.1 | not-accessible | current | |
| hwIfName OBJECT-TYPE This object indicates an interface name. | 1.3.6.1.4.1.2011.5.25.41.1.12.1.1.1 | OCTET STRING (SIZE(1..47)) | accessible-for-notify | current |
| hwIfIndex OBJECT-TYPE The value of this object identifies the interface index. | 1.3.6.1.4.1.2011.5.25.41.1.12.1.1.2 | InterfaceIndex | read-only | current |
| hwLogicIfAttrib OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.13 | |||
| hwLogicIfTable OBJECT-TYPE This table describes how to create, delete, and display logical interfaces and sub-interfaces. | 1.3.6.1.4.1.2011.5.25.41.1.13.1 | not-accessible | current | |
| hwLogicIfEntry OBJECT-TYPE Logic interface table. | 1.3.6.1.4.1.2011.5.25.41.1.13.1.1 | not-accessible | current | |
| hwLogicIfIndex OBJECT-TYPE Indicates the interface index. The interface index to be created must be 0. Then the system automatically allocates an interface index. | 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.1 | InterfaceIndexOrZero | not-accessible | current |
| hwLogicIfMainIndex OBJECT-TYPE Indicates the interface index of the main interface to which the sub-interface belongs. For other interfaces, the interface index is 0. | 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.11 | InterfaceIndexOrZero | read-only | current |
| hwLogicIfType OBJECT-TYPE Indicates the interface type. | 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.12 | INTEGER {ve(1), loopback(2), vlanif(3), subVe(4), subEthTrunk(5), subEthernet(6), subAtm(7), imaGroup(8), subImaGroup(9), subSerial(10), tunnel(11), mpGroup(13), bridgeIf(14), subAtmTrunk(15), dslGroup(16), wlanEss(17), stackPort(18), globalImaGroup(19), subGlobalImaGroup(20), remoteAp(21), vBridge(22), atmBundle(23), mtunnel(24), subPosFr(25), globalVe(26), subGlobalVe(27), nve(28), vt(29), fcoe(30), lmpif(31), serviceIf(32), virtualSerial(33), pwVe(34), subPwVe(35), vbdIf(36), gmplsUni(37)} | read-create | current |
| hwLogicIfName OBJECT-TYPE Indicates the interface name. The interface name must be a name without blank spaces and Tab characters. | 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.13 | DisplayString (SIZE(1..64)) | read-create | current |
| hwLogicIfParaOne OBJECT-TYPE This object indicates the extension parameter of a logical interface. The default value is p2mp. For other interfaces, this object returns none after the get operation. | 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.14 | INTEGER {p2p(1), p2mp(2), l2subif(3), none(255)} | read-create | current |
| hwLogicIfRowStatus OBJECT-TYPE Indicates the status of the row. | 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.51 | RowStatus | read-create | current |
| hwLogicIfHelpTable OBJECT-TYPE Logic interface help table. | 1.3.6.1.4.1.2011.5.25.41.1.13.2 | not-accessible | current | |
| hwLogicIfHelpEntry OBJECT-TYPE Logic interface help table. | 1.3.6.1.4.1.2011.5.25.41.1.13.2.1 | not-accessible | current | |
| hwLogicIfhelpType OBJECT-TYPE Indicates the types of logical interfaces that can be queried. | 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.1 | INTEGER {ve(1), imaGroup(8), tunnel(11), mpGroup(13), dslGroup(16)} | read-only | current |
| hwLogicIfChassisNumber OBJECT-TYPE Indicates the ID of the chassis that supports the creation of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.2 | OCTET STRING (SIZE(1..2)) | read-only | current |
| hwLogicIfSlotNumber OBJECT-TYPE Indicates the ID of the slot that supports the creation of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.3 | OCTET STRING (SIZE(1..32)) | read-only | current |
| hwLogicIfCardNumber OBJECT-TYPE Indicates the number of the card that supports the creation of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.4 | OCTET STRING (SIZE(1..512)) | read-only | current |
| hwLogicIfMin OBJECT-TYPE Indicates the minimum port number of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.5 | Integer32 | read-only | current |
| hwLogicIfMax OBJECT-TYPE Indicates the maximum port number of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.6 | Integer32 | read-only | current |
| hwLogicIfTotal OBJECT-TYPE Indicates the maximum number of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.7 | Integer32 | read-only | current |
| hwLogicIfDynamicHelpTable OBJECT-TYPE Logic interface dynamic help table. | 1.3.6.1.4.1.2011.5.25.41.1.13.3 | not-accessible | current | |
| hwLogicIfDynamicHelpEntry OBJECT-TYPE Logic interface dynamic help table. | 1.3.6.1.4.1.2011.5.25.41.1.13.3.1 | not-accessible | current | |
| hwLogicDynamicIfhelpType OBJECT-TYPE Indicates the types of logical interfaces that can be queried. | 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.1 | INTEGER {ve(1), imaGroup(8), tunnel(11), mpGroup(13), dslGroup(16)} | read-only | current |
| hwLogicDynamicIfChassisNumber OBJECT-TYPE Indicates the ID of the chassis that that can be queried. | 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.2 | Integer32 | read-only | current |
| hwLogicDynamicIfSlotNumber OBJECT-TYPE Indicates the ID of the slot that can be queried. | 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.3 | Integer32 | read-only | current |
| hwLogicDynamicIfCardNumber OBJECT-TYPE Indicates the ID of the card that can be queried. | 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.4 | Integer32 | read-only | current |
| hwLogicDynamicIfMin OBJECT-TYPE Indicates the minimum port number of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.5 | Integer32 | read-only | current |
| hwLogicDynamicIfMax OBJECT-TYPE Indicates the maximum port number of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.6 | Integer32 | read-only | current |
| hwLogicDynamicIfTotal OBJECT-TYPE Indicates the maximum number of the specified logical interface. | 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.7 | Integer32 | read-only | current |
| hwCppsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.14 | |||
| hwCppsGlobalEnable OBJECT-TYPE Whether statistic function is enabled globally, and the default value is disable. | 1.3.6.1.4.1.2011.5.25.41.1.14.1 | EnabledStatus | read-write | current |
| hwCppsInterfaceTable OBJECT-TYPE CPU packet and byte statistic interface configuration table. | 1.3.6.1.4.1.2011.5.25.41.1.14.2 | not-accessible | current | |
| hwCppsInterfaceEntry OBJECT-TYPE The entry of hwCppsInterfaceTable. | 1.3.6.1.4.1.2011.5.25.41.1.14.2.1 | not-accessible | current | |
| hwCppsInterfaceIndex OBJECT-TYPE Index number of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.14.2.1.1 | InterfaceIndex | not-accessible | current |
| hwCppsPortPvcEnable OBJECT-TYPE Whether statistic function is enabled on PVC. | 1.3.6.1.4.1.2011.5.25.41.1.14.2.1.2 | EnabledStatus | read-write | current |
| hwCppsPortVlanEnable OBJECT-TYPE Whether statistic function is enabled on VLAN. | 1.3.6.1.4.1.2011.5.25.41.1.14.2.1.3 | EnabledStatus | read-write | current |
| hwCppsIfStatisticsTable OBJECT-TYPE CPU packet and byte statistic interface table. | 1.3.6.1.4.1.2011.5.25.41.1.14.3 | not-accessible | current | |
| hwCppsIfStatisticsEntry OBJECT-TYPE The entry of hwCppsIfStatisticsTable. | 1.3.6.1.4.1.2011.5.25.41.1.14.3.1 | not-accessible | current | |
| hwCppsIfStatisticsIndex OBJECT-TYPE Index number of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.14.3.1.1 | InterfaceIndex | not-accessible | current |
| hwCppsInterfacePktStatisic OBJECT-TYPE Packet statistic information of the interface sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.1.14.3.1.2 | Counter64 | read-only | current |
| hwCppsInterfaceByteStatisic OBJECT-TYPE Byte statistic information of the interface sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.1.14.3.1.3 | Counter64 | read-only | current |
| hwCppsResetInterfaceStatisic OBJECT-TYPE Whether to reset statistics. | 1.3.6.1.4.1.2011.5.25.41.1.14.3.1.4 | INTEGER {reset(1), unreset(2)} | read-write | current |
| hwCppsAtmPvcTable OBJECT-TYPE CPU packet and byte statistic ATM PVC table. | 1.3.6.1.4.1.2011.5.25.41.1.14.4 | not-accessible | current | |
| hwCppsAtmPvcEntry OBJECT-TYPE The entry of hwCppsAtmPvcTable. | 1.3.6.1.4.1.2011.5.25.41.1.14.4.1 | not-accessible | current | |
| hwCppsAtmIfIndex OBJECT-TYPE Index number of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.1 | InterfaceIndex | not-accessible | current |
| hwCppsAtmVpi OBJECT-TYPE VPI. | 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.2 | AtmVpIdentifier | not-accessible | current |
| hwCppsAtmVci OBJECT-TYPE VCI. | 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.3 | AtmVcIdentifier | not-accessible | current |
| hwCppsAtmPvcPktStatisic OBJECT-TYPE Packet statistic information of the PVC sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.4 | Counter64 | read-only | current |
| hwCppsAtmPvcByteStatisic OBJECT-TYPE Byte statistic information of the PVC sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.5 | Counter64 | read-only | current |
| hwCppsResetAtmPvcStatisic OBJECT-TYPE Whether to reset statistics. | 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.6 | INTEGER {reset(1), unreset(2)} | read-write | current |
| hwCppsPortVlanTable OBJECT-TYPE CPU packet and byte statistic port VLAN table. | 1.3.6.1.4.1.2011.5.25.41.1.14.5 | not-accessible | current | |
| hwCppsPortVlanEntry OBJECT-TYPE The entry of hwCppsPortVlanTable. | 1.3.6.1.4.1.2011.5.25.41.1.14.5.1 | not-accessible | current | |
| hwCppsPortIndex OBJECT-TYPE Index number of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.1 | InterfaceIndex | not-accessible | current |
| hwCppsVlanId OBJECT-TYPE VLAN ID. | 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.2 | VlanIdOrNone | not-accessible | current |
| hwCppsPortVlanPktStatisic OBJECT-TYPE Packet statistic information of the port sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.3 | Counter64 | read-only | current |
| hwCppsPortVlanByteStatisic OBJECT-TYPE Byte statistic information of the port sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.4 | Counter64 | read-only | current |
| hwCppsResetPortVlanStatisic OBJECT-TYPE Whether to reset statistics. | 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.5 | INTEGER {reset(1), unreset(2)} | read-write | current |
| hwPortIsolationGroupAttrib OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.15 | |||
| hwPortIsolationGroupTable OBJECT-TYPE Logic interface table. | 1.3.6.1.4.1.2011.5.25.41.1.15.1 | not-accessible | current | |
| hwPortIsolationGroupEntry OBJECT-TYPE Logic interface table. | 1.3.6.1.4.1.2011.5.25.41.1.15.1.1 | not-accessible | current | |
| hwPortIsolationGroupIndex OBJECT-TYPE ID of Port-Isolation-Group. | 1.3.6.1.4.1.2011.5.25.41.1.15.1.1.1 | Integer32 (0..63) | not-accessible | current |
| hwPortIsolationGroupPortList OBJECT-TYPE PortList of Port-Isolation-Group. | 1.3.6.1.4.1.2011.5.25.41.1.15.1.1.2 | PortList | read-create | current |
| hwPortIsolationGroupRowStatus OBJECT-TYPE Indicates the status of the row. | 1.3.6.1.4.1.2011.5.25.41.1.15.1.1.3 | RowStatus | read-create | current |
| hwVTrunkAttr OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.16 | |||
| hwVTrunkIfTable OBJECT-TYPE The vtrunk table. | 1.3.6.1.4.1.2011.5.25.41.1.16.1 | not-accessible | current | |
| hwVTrunkIfEntry OBJECT-TYPE Entries of the vtrunk table. | 1.3.6.1.4.1.2011.5.25.41.1.16.1.1 | not-accessible | current | |
| hwVTrunkIfIndex OBJECT-TYPE The IfIndex of the VTrunk interface. | 1.3.6.1.4.1.2011.5.25.41.1.16.1.1.1 | InterfaceIndex | accessible-for-notify | current |
| hwVTrunkIfID OBJECT-TYPE The identification of the VTrunk interface.It may identify VTrunk and is an index of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.16.1.1.2 | Integer32 | read-create | current |
| hwVTrunkIfType OBJECT-TYPE The type of the VTrunk interface includes pos-Trunk, cpos-Trunk, atm-trunk and atm-bundle. | 1.3.6.1.4.1.2011.5.25.41.1.16.1.1.3 | INTEGER {posTrunk(1), cposTrunk(2), atmTrunk(3), atmBundle(4)} | read-create | current |
| hwVTrunkIfRowStatus OBJECT-TYPE Current operation status of the row. | 1.3.6.1.4.1.2011.5.25.41.1.16.1.1.50 | RowStatus | read-create | current |
| hwVTrunkMemAttr OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.17 | |||
| hwVTrunkMemTable OBJECT-TYPE VTrunk member attribute information table. | 1.3.6.1.4.1.2011.5.25.41.1.17.1 | not-accessible | current | |
| hwVTrunkMemEntry OBJECT-TYPE VTrunk member attribute information. | 1.3.6.1.4.1.2011.5.25.41.1.17.1.1 | not-accessible | current | |
| hwVTrunkMemIfIndex OBJECT-TYPE VTrunk port index. | 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.1 | Integer32 | accessible-for-notify | current |
| hwVTrunkIfnetIndex OBJECT-TYPE The IfnetIndex of the VTrunk interface. | 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.2 | Integer32 | read-create | current |
| hwVTrunkValidEntry OBJECT-TYPE Valid Entries of VTrunk interface. | 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.3 | INTEGER {valid(1), invalid(2)} | read-only | current |
| hwVTrunkOperstatus OBJECT-TYPE Status of operation, indicates port status. There are vtrunk_up(1) and vtrunk_down(2).It expresses whether port is shutdown. | 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.4 | INTEGER {up(1), down(2)} | read-only | current |
| hwVTrunkPortActive OBJECT-TYPE Active port of backup-access vtrunk or not 1: portInactive 2: portActive. | 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.5 | INTEGER {portInactive(1), portActive(2)} | read-only | current |
| hwVTrunkRowStatus OBJECT-TYPE Current operation status of the row. | 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.50 | RowStatus | read-create | current |
| hwMasterBackupTrunkSubinterfaceAttr OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.18 | |||
| hwMasterBackupTrunkSubinterfaceTable OBJECT-TYPE Master-Backup Trunk Subinterface attribute information table. | 1.3.6.1.4.1.2011.5.25.41.1.18.1 | not-accessible | current | |
| hwMasterBackupTrunkSubinterfaceEntry OBJECT-TYPE Master-Backup Trunk Subinterface attribute information. | 1.3.6.1.4.1.2011.5.25.41.1.18.1.1 | not-accessible | current | |
| hwBackupTrunkIfIndex OBJECT-TYPE This object indicates index of master/backup trunk sub-interface. | 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.1 | InterfaceIndex | not-accessible | current |
| hwBackupStatus OBJECT-TYPE The value of this object identifies backupStatus of master/backup trunk sub-interface. | 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.2 | INTEGER {init(1), master(2), backup(3)} | read-only | current |
| hwRevertiveMode OBJECT-TYPE The value of this object identifies revertive-mode of master/backup trunk sub-interface. | 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.3 | INTEGER {revertive(1), nonRevertive(2)} | read-write | current |
| hwWtrTime OBJECT-TYPE The value of this object identifies the wait-to-restore time of master/backup trunk sub-interface. | 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.4 | Integer32 | read-write | current |
| hwFlushVlanId OBJECT-TYPE This object indicates VLAN ID carried in a FlushPDU. | 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.5 | VlanIdOrNone | read-write | current |
| hwVaspPort OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.19 | |||
| hwVaspPortPeerMacTable OBJECT-TYPE Vasp port peer MAC table. | 1.3.6.1.4.1.2011.5.25.41.1.19.1 | not-accessible | current | |
| hwVaspPortPeerMacEntry OBJECT-TYPE Vasp port peer MAC table entry. | 1.3.6.1.4.1.2011.5.25.41.1.19.1.1 | not-accessible | current | |
| hwVaspPortIfIndex OBJECT-TYPE The index of interface. | 1.3.6.1.4.1.2011.5.25.41.1.19.1.1.1 | InterfaceIndex | not-accessible | current |
| hwVaspPortName OBJECT-TYPE The name of vasp port. | 1.3.6.1.4.1.2011.5.25.41.1.19.1.1.2 | DisplayString | read-only | current |
| hwVaspPortPeerMac OBJECT-TYPE The peer MAC of port. | 1.3.6.1.4.1.2011.5.25.41.1.19.1.1.3 | PhysAddress | read-only | current |
| hwIFExtTrapObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.20 | |||
| hwLinkDownReason OBJECT-TYPE The reason code of link changes. | 1.3.6.1.4.1.2011.5.25.41.1.20.1 | INTEGER {physicalLinkDown(1), lacpNegotiationFailed(2), receiveConfReqPacket(3), receiveConfAckPacket(4), receiveNakPacket(5), receiveTermPacket(6), receiveTermAckPacket(7), receiveCodeRejPacket(8), receiveProtoRejPacket(9), chapAuthenticationFailed(10), papAuthenticationFailed(11), keepaliveOutOfTime(12), pvcDown(13), efmSessionFailed(14), tunnelDownOrInexist(15), admindown(16), protocoldown(17), adminup(18), protocolup(19), mainifdown(20), physicalLinkIsUp(21), conditionsForActivationNotMet(22), conditionsForActivationAreMet(23), tunnelIsUp(24), interfaceIsDeleted(25), bfdSessionDown(26), bfdSessionUp(27), efmSessionUp(28), portAlarmDown(29), dldpIsDown(30), dldpIsUp(31), vrrpFlowDown(32), vrrpFlowUp(33), veFlowDown(34), veFlowUp(35), errorDown(36), crcErrorDown(37), crcErrorUp(38), transceiverSpeedMismatch(39), transceiverTypeMismatch(40), negotiationUnsupported(41), linkHeartBeatDown(42), triggerDown(43), cfmSessionDown(48), cfmSessionUp(49)} | accessible-for-notify | current |
| hwMainIfName OBJECT-TYPE The main interface name. | 1.3.6.1.4.1.2011.5.25.41.1.20.2 | DisplayString | accessible-for-notify | current |
| hwCfmOverPhysicalName OBJECT-TYPE The configuration of the interface board or interface card is restored. | 1.3.6.1.4.1.2011.5.25.41.1.20.3 | DisplayString | accessible-for-notify | current |
| hwIpv6IfChangeDownReason OBJECT-TYPE The reason code of link changes. | 1.3.6.1.4.1.2011.5.25.41.1.20.4 | INTEGER {interfaceIsDown(1), ipv6AddressUnavailable(2), ipv6AddressAvailable(3), pppIpcp6Down(4), disableIpv6ProtocolorDeleteInterface(6)} | read-only | current |
| hwTrunkIfDescr OBJECT-TYPE The name of trunk interface. | 1.3.6.1.4.1.2011.5.25.41.1.20.5 | DisplayString | accessible-for-notify | current |
| hwTrunkMemIfDescr OBJECT-TYPE The name of trunk member interface. | 1.3.6.1.4.1.2011.5.25.41.1.20.6 | DisplayString | accessible-for-notify | current |
| hwTrunkActiveMember OBJECT-TYPE The number of active trunk members. | 1.3.6.1.4.1.2011.5.25.41.1.20.7 | Integer32 | accessible-for-notify | current |
| hwIfExtTrapReason OBJECT-TYPE The reason of an event. | 1.3.6.1.4.1.2011.5.25.41.1.20.8 | DisplayString | accessible-for-notify | current |
| hwLacpOldPDUInfo OBJECT-TYPE The old lacp PDU field. | 1.3.6.1.4.1.2011.5.25.41.1.20.9 | DisplayString | accessible-for-notify | current |
| hwLacpNewPDUInfo OBJECT-TYPE The new lacp PDU field. | 1.3.6.1.4.1.2011.5.25.41.1.20.10 | DisplayString | accessible-for-notify | current |
| hwLagMemberDownReason OBJECT-TYPE The lag member down reason. | 1.3.6.1.4.1.2011.5.25.41.1.20.11 | DisplayString | accessible-for-notify | current |
| hwLicenseItemName OBJECT-TYPE The license item name. | 1.3.6.1.4.1.2011.5.25.41.1.20.12 | DisplayString | accessible-for-notify | current |
| hwLicenseServiceDesc OBJECT-TYPE The service description. | 1.3.6.1.4.1.2011.5.25.41.1.20.13 | DisplayString | accessible-for-notify | current |
| hwTrunkIfStatus OBJECT-TYPE The status of trunk. | 1.3.6.1.4.1.2011.5.25.41.1.20.14 | INTEGER {up(1), down(2)} | accessible-for-notify | current |
| hwType OBJECT-TYPE eth-trunk member changes type, only used for trap. | 1.3.6.1.4.1.2011.5.25.41.1.20.15 | OCTET STRING (SIZE(0..32)) | accessible-for-notify | current |
| hwEthTrunkIfIndex OBJECT-TYPE eth-trunk Ifindex, only used for trap. | 1.3.6.1.4.1.2011.5.25.41.1.20.16 | Integer32 (1..65535) | accessible-for-notify | current |
| hwTrunkName OBJECT-TYPE eth-trunk name, only used for trap. | 1.3.6.1.4.1.2011.5.25.41.1.20.17 | OCTET STRING (SIZE(0..32)) | accessible-for-notify | current |
| hwPortIfIndexList OBJECT-TYPE eth-trunk member ifindex list, only used for trap. | 1.3.6.1.4.1.2011.5.25.41.1.20.18 | OCTET STRING (SIZE(0..128)) | accessible-for-notify | current |
| hwPortNameList OBJECT-TYPE eth-trunk member name list, only used for trap. | 1.3.6.1.4.1.2011.5.25.41.1.20.19 | OCTET STRING (SIZE(0..256)) | accessible-for-notify | current |
| hwTrunkMapAttr OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.21 | |||
| hwTrunkMapTable OBJECT-TYPE The trunk map table. | 1.3.6.1.4.1.2011.5.25.41.1.21.1 | not-accessible | current | |
| hwTrunkMapEntry OBJECT-TYPE Entries of the trunk map table. | 1.3.6.1.4.1.2011.5.25.41.1.21.1.1 | not-accessible | current | |
| hwTrunkMapType OBJECT-TYPE The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link. | 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.1 | INTEGER {ethTrunk(1), ipTrunk(2)} | accessible-for-notify | current |
| hwTrunkMapID OBJECT-TYPE The identification of the Trunk interface.It may identify Trunk and is an index of the interface. | 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.2 | Integer32 | accessible-for-notify | current |
| hwTrunkMapIndex OBJECT-TYPE The number of the Trunk interface. | 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.3 | Integer32 | read-only | current |
| hwMruDiscardStatisticAttr OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.22 | |||
| hwMruDiscardStatisticTable OBJECT-TYPE This table contains the mru discard statistic | 1.3.6.1.4.1.2011.5.25.41.1.22.1 | not-accessible | current | |
| hwMruDiscardStatisticEntry OBJECT-TYPE Provides the information of the mru discard statistic . | 1.3.6.1.4.1.2011.5.25.41.1.22.1.1 | not-accessible | current | |
| hwMruDiscardStatisticIfIndex OBJECT-TYPE This object indicates the interface index. | 1.3.6.1.4.1.2011.5.25.41.1.22.1.1.1 | InterfaceIndex | not-accessible | current |
| hwMruDiscardStatisticDropPack OBJECT-TYPE This object indicates the drop packets. | 1.3.6.1.4.1.2011.5.25.41.1.22.1.1.2 | Counter64 | read-only | current |
| hwMruDiscardStatisticDropByte OBJECT-TYPE This object indicates the drop bytes. | 1.3.6.1.4.1.2011.5.25.41.1.22.1.1.3 | Counter64 | read-only | current |
| hwIfIpStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.23 | |||
| hwIfIpStatisticsTable OBJECT-TYPE Interface Rate Statistic Table | 1.3.6.1.4.1.2011.5.25.41.1.23.1 | not-accessible | current | |
| hwIfIpStatisticsEntry OBJECT-TYPE Entry of Interface Rate Statistic Table | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1 | not-accessible | current | |
| hwIfIpStatsIPVersion OBJECT-TYPE The IP version of this row. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.1 | InetVersion | not-accessible | current |
| hwIfIpStatsIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.2 | InterfaceIndex | not-accessible | current |
| hwIfIpStatsInHostPacketRates OBJECT-TYPE The packet rates of the interface which receive host packets. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.3 | Counter64 | read-only | current |
| hwIfIpStatsInHostBitRates OBJECT-TYPE The bit rates of the interface which receive host packets. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.4 | Counter64 | read-only | current |
| hwIfIpStatsOutHostPacketRates OBJECT-TYPE The packet rates of the interface which send host packets. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.5 | Counter64 | read-only | current |
| hwIfIpStatsOutHostBitRates OBJECT-TYPE The bit rates of the interface which send host packets. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.6 | Counter64 | read-only | current |
| hwIfIpStatsInFwdPacketRates OBJECT-TYPE The packet rates of the interface which receive forwarding packets. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.7 | Counter64 | read-only | current |
| hwIfIpStatsInFwdBitRates OBJECT-TYPE The bit rates of the interface which receive forwarding packets. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.8 | Counter64 | read-only | current |
| hwIfIpStatsOutFwdPacketRates OBJECT-TYPE The packet rates of the interface which send forwarding packets. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.9 | Counter64 | read-only | current |
| hwIfIpStatsOutFwdBitRates OBJECT-TYPE The bit rates of the interface which send forwarding packets. | 1.3.6.1.4.1.2011.5.25.41.1.23.1.1.10 | Counter64 | read-only | current |
| hwModeChannelFlowOver OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.24 | |||
| hwModeChannelRecvFlowOverTable OBJECT-TYPE Mode Channel Subinterface Received FlowOver Table | 1.3.6.1.4.1.2011.5.25.41.1.24.1 | not-accessible | current | |
| hwModeChannelRecvFlowOverEntry OBJECT-TYPE Entry of Mode Channel Subinterface Received FlowOver Table | 1.3.6.1.4.1.2011.5.25.41.1.24.1.1 | not-accessible | current | |
| hwModeChannelRecvFlowOverIfIndex OBJECT-TYPE The Index Value of Mode Channel Subinterface Received FlowOver Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.1.1.1 | InterfaceIndex | read-only | current |
| hwModeChannelRecvFlowOverPercentage OBJECT-TYPE Percentage of Mode Channel Subinterface Received FlowOver Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.1.1.2 | Integer32 | read-only | current |
| hwModeChannelRecvFlowOverThreshold OBJECT-TYPE Threshold of Mode Channel Subinterface Received FlowOver Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.1.1.3 | Integer32 | read-only | current |
| hwModeChannelRecvFlowOverInterfaceName OBJECT-TYPE Interface Name of Mode Channel Subinterface Received FlowOver Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.1.1.7 | DisplayString | read-only | current |
| hwModeChannelSendFlowOverTable OBJECT-TYPE Mode Channel Subinterface Send FlowOver Table | 1.3.6.1.4.1.2011.5.25.41.1.24.2 | not-accessible | current | |
| hwModeChannelSendFlowOverEntry OBJECT-TYPE Entry of Mode Channel Subinterface Send FlowOver Table | 1.3.6.1.4.1.2011.5.25.41.1.24.2.1 | not-accessible | current | |
| hwModeChannelSendFlowOverIfIndex OBJECT-TYPE The Index Value of Mode Channel Subinterface Send FlowOver Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.2.1.1 | InterfaceIndex | read-only | current |
| hwModeChannelSendFlowOverPercentage OBJECT-TYPE Percentage of Mode Channel Subinterface Send FlowOver Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.2.1.2 | Integer32 | read-only | current |
| hwModeChannelSendFlowOverThreshold OBJECT-TYPE Threshold of Mode Channel Subinterface Send FlowOver Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.2.1.3 | Integer32 | read-only | current |
| hwModeChannelSendFlowOverInterfaceName OBJECT-TYPE Interface Name of Mode Channel Subinterface Send FlowOver Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.2.1.4 | DisplayString | read-only | current |
| hwSubChannelIfBandwidthTable OBJECT-TYPE Mode Channel SubInterface Bandwidth Table | 1.3.6.1.4.1.2011.5.25.41.1.24.3 | not-accessible | current | |
| hwSubChannelIfBandwidthEntry OBJECT-TYPE Entry of Mode Channel SubInterface Bandwidth Table | 1.3.6.1.4.1.2011.5.25.41.1.24.3.1 | not-accessible | current | |
| hwSubChannelBandwidthIfIndex OBJECT-TYPE The Index Value of Mode Channel SubInterface Bandwidth Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.3.1.1 | InterfaceIndex | read-only | current |
| hwSubChannelBandwidthValue OBJECT-TYPE Bandwidth Value of Mode Channel SubInterface Bandwidth Table. | 1.3.6.1.4.1.2011.5.25.41.1.24.3.1.2 | Integer32 | read-only | current |
| hwModeChannelBandwidth OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.1.25 | |||
| hwModeChannelBandwidthTable OBJECT-TYPE The total bandwidth of the channelized sub-interfaces alarm monitor table. | 1.3.6.1.4.1.2011.5.25.41.1.25.1 | not-accessible | current | |
| hwModeChannelBandwidthEntry OBJECT-TYPE Entry of the total bandwidth of the channelized sub-interfaces alarm monitor table. | 1.3.6.1.4.1.2011.5.25.41.1.25.1.1 | not-accessible | current | |
| hwModeChannelBandwidthIfIndex OBJECT-TYPE The Index Value of the total bandwidth of the channelized sub-interfaces alarm monitor table. | 1.3.6.1.4.1.2011.5.25.41.1.25.1.1.1 | InterfaceIndex | accessible-for-notify | current |
| hwModeChannelBandwidthValue OBJECT-TYPE The maximum available bandwidth of the physical interface. | 1.3.6.1.4.1.2011.5.25.41.1.25.1.1.2 | Integer32 | read-only | current |
| hwModeChannelSubIfBandwidthSum OBJECT-TYPE The total bandwidth of the channelized sub-interfaces on the physical interface. | 1.3.6.1.4.1.2011.5.25.41.1.25.1.1.3 | Integer32 | read-only | current |
| hwModeChannelIfName OBJECT-TYPE Interface name of physical interface. | 1.3.6.1.4.1.2011.5.25.41.1.25.1.1.4 | DisplayString | read-only | current |
| hwIFExtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.2 | |||
| hwIFExtGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.2.1 | |||
| hwIFExtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.2.2 | |||
| hwIFExtTraps OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.3 | |||
| hwMonitorNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.4 | |||
| hwIFExtTrapConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.5 | |||
| hwIFExtTrapGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.5.1 | |||
| hwIFIpNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.41.6 |
Notifications
| Name | OID | Status |
|---|---|---|
| hwTrunkWorkingSwitch NOTIFICATION-TYPE This notification indicates that the trunk working mode is switched. | 1.3.6.1.4.1.2011.5.25.41.3.1 | current |
| hwLacpNegotiateFailed NOTIFICATION-TYPE The member of LAG neither can take over PDU nor transmit PDUs. Send this trap when LACP protocol negotiation fails. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.2 | current |
| hwLacpTotalLinkLoss NOTIFICATION-TYPE This notification indicates that all the link bandwidths are lost. Some member interfaces in the LAG do not work, and the number of working interfaces is smaller than the hwTrunkIfMinLinkNum value. The Partial Link Loss (PLL) alarm is restricted by the Total Link Loss (TLL) alarm. This object can be bound to two variables: 1. hwTrunkIfID: ID of a trunk interface. 2. ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex. | 1.3.6.1.4.1.2011.5.25.41.3.3 | current |
| hwLacpPartialLinkLoss NOTIFICATION-TYPE Part loss of link bandwidth: it means that some members in the LAG group aren't in the working-state, making the number of ports in working-state smaller than the hwTrunkIfMinLinkNum. The trap of PLL(Partial Link Loss) will be restrained by the trap of TLL(Total Link Loss). 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex. | 1.3.6.1.4.1.2011.5.25.41.3.4 | current |
| hwIfFlowDown NOTIFICATION-TYPE This notification indicates that the interface's flow status changes to flow Down. This object can be bound to two variables: 1. sysUpTime: indicates the time when the event occurs. 2. hwIFExtFlowStatus: The interface's flow status changes to Down. | 1.3.6.1.4.1.2011.5.25.41.3.5 | current |
| hwIfFlowUp NOTIFICATION-TYPE This notification indicates that the interface's flow status is restored to flow Up. This object can be bound to two variables: 1. sysUpTime: indicates the time when the event occurs. 2. hwIFExtFlowStatus: The interface's flow status is restored to Up. | 1.3.6.1.4.1.2011.5.25.41.3.6 | current |
| hwIfNameChange NOTIFICATION-TYPE When a single-chassis device is upgraded to a multi-chassis device, the interface information is changed and then the system sends a trap. | 1.3.6.1.4.1.2011.5.25.41.3.7 | current |
| hwIfNameChangeResume NOTIFICATION-TYPE When a multi-chassis restore a single-chassis device, the interface information is changed and then the system sends a trap. | 1.3.6.1.4.1.2011.5.25.41.3.8 | current |
| hwExtLinkDown NOTIFICATION-TYPE This object indicates that the link protocol of a trunk member interface goes Down. | 1.3.6.1.4.1.2011.5.25.41.3.9 | deprecated |
| hwExtLinkUp NOTIFICATION-TYPE This object indicates that the link protocol of a trunk member interface goes Up. | 1.3.6.1.4.1.2011.5.25.41.3.10 | deprecated |
| hwLoopbackBlock NOTIFICATION-TYPE This notification indicates block state of the interface. | 1.3.6.1.4.1.2011.5.25.41.3.11 | current |
| hwLoopbackResume NOTIFICATION-TYPE This notification indicates normal state of the interface. | 1.3.6.1.4.1.2011.5.25.41.3.12 | current |
| hwLacpNegotiateResume NOTIFICATION-TYPE Negotiation failure alarm is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.13 | current |
| hwLacpTotalLinkLossResume NOTIFICATION-TYPE Link bandwidth lost totally is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex. | 1.3.6.1.4.1.2011.5.25.41.3.14 | current |
| hwLacpPartialLinkLossResume NOTIFICATION-TYPE Link bandwidth lost partly is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex. | 1.3.6.1.4.1.2011.5.25.41.3.15 | current |
| hwTrunkSubIfStateToMaster NOTIFICATION-TYPE This notification indicates BackupState of the Trunk subinterface. 1.hwIfName: The identification of the Trunk subinterface; 2.hwBackupStatus: Current working state of Trunk subinterface. | 1.3.6.1.4.1.2011.5.25.41.3.24 | current |
| hwTrunkSubIfStateToSlave NOTIFICATION-TYPE This notification indicates BackupState of the Trunk subinterface. 1.hwIfName: The identification of the Trunk subinterface; 2.hwBackupStatus: Current working state of Trunk subinterface. | 1.3.6.1.4.1.2011.5.25.41.3.25 | current |
| hwEntityExtCfmOverSlot NOTIFICATION-TYPE The hwEntityExtCfmOverSlot notification will be displayed when the configuration of an interface board is restored. The object hwCfmOverPhysicalName idicates the name of the interface board. | 1.3.6.1.4.1.2011.5.25.41.3.26 | current |
| hwEntityExtCfmOverCard NOTIFICATION-TYPE The hwEntityExtCfmOverCard notification will be displayed when the configuration of an interface card is restored. The object hwCfmOverPhysicalName idicates the name of the interface card. | 1.3.6.1.4.1.2011.5.25.41.3.27 | current |
| hwExtAllMemberDownNotify NOTIFICATION-TYPE This notification indicates the time when the last member interface link status changes to down. The ifName indicates the name of the Trunk interface. | 1.3.6.1.4.1.2011.5.25.41.3.28 | current |
| hwExtAllMemberDownResume NOTIFICATION-TYPE This notification indicates the time when the first member interface link status changes to up. The ifName indicates the name of the Trunk interface. | 1.3.6.1.4.1.2011.5.25.41.3.29 | current |
| hwTrunkMemNumberChange NOTIFICATION-TYPE The number of active trunk members changed. | 1.3.6.1.4.1.2011.5.25.41.3.30 | current |
| hwIfControlFlapSuppress NOTIFICATION-TYPE This notification indicates the time when the interface's status changes from unsuppress to suppress. | 1.3.6.1.4.1.2011.5.25.41.3.31 | current |
| hwIfControlFlapResume NOTIFICATION-TYPE This notification indicates the time when the interface's status changes from suppress to unsuppress. | 1.3.6.1.4.1.2011.5.25.41.3.32 | current |
| hwExtInterfaceDelete NOTIFICATION-TYPE This notification indicates the time when the interface was deleted. | 1.3.6.1.4.1.2011.5.25.41.3.33 | current |
| hwLacpPartnerExpiredLoss NOTIFICATION-TYPE The member of LAG receive expired PDU from partner. Send this trap when LACP protocol negotiation fails. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.34 | current |
| hwLacpPDUChange NOTIFICATION-TYPE The LACP member interface's status changed from selected to unselected due to the PDU change. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. 4.hwLacpOldPDUInfo: It is the old PDU field of the port in the hwIFExtTrapObjects of hwIFExtMib. 5.hwLacpNewPDUInfo: It is the new PDU field of the port in the hwIFExtTrapObjects of hwIFExtMib. 6.hwIfExtTrapReason: It is the reason of this trap in the hwIFExtTrapObjects of hwIFExtMib. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.35 | current |
| hwLacpPDUChangeResume NOTIFICATION-TYPE The LACP member interface's status changed from unselected to selected. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.36 | current |
| hwIfEfmDown NOTIFICATION-TYPE This notification indicates that the interface status changes to EFM Down because the interface has tracked EFM session and the EFM session goes Down. | 1.3.6.1.4.1.2011.5.25.41.3.37 | current |
| hwIfEfmUp NOTIFICATION-TYPE This notification indicates that the interface status changes to EFM Up because the interface has tracked EFM session and the EFM session goes Up. | 1.3.6.1.4.1.2011.5.25.41.3.38 | current |
| hwExtTrunkMemberCountExceedThreshold NOTIFICATION-TYPE The number of members of the Eth-Trunk in LACP mode exceeded the upper threshold. | 1.3.6.1.4.1.2011.5.25.41.3.39 | current |
| hwExtTrunkMemberCountExceedThresholdResume NOTIFICATION-TYPE The number of members of the Eth-Trunk in LACP mode fell below the lower threshold. | 1.3.6.1.4.1.2011.5.25.41.3.40 | current |
| hwExtTrunkWorkingStatusChange NOTIFICATION-TYPE This notification indicates that the working status of the backup trunk changed. | 1.3.6.1.4.1.2011.5.25.41.3.41 | current |
| hwIfControlFlapSuppressIPv6 NOTIFICATION-TYPE This notification indicates the time when the interface's status changes from unsuppress to suppress(IPv6). | 1.3.6.1.4.1.2011.5.25.41.3.42 | current |
| hwIfControlFlapResumeIPv6 NOTIFICATION-TYPE This notification indicates the time when the interface's status changes from suppress to unsuppress(IPv6). | 1.3.6.1.4.1.2011.5.25.41.3.43 | current |
| hwLagMemberDown NOTIFICATION-TYPE The LAG member status changes. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. 4.hwLagMemberDownReason: It is the down reason of the lag member port in the hwIFExtTrapObjects of hwIFExtMib. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.44 | current |
| hwLagMemberDownResume NOTIFICATION-TYPE The LAG member status resumes. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. 4.hwLagMemberDownReason: It is the down reason of the lag member port in the hwIFExtTrapObjects of hwIFExtMib. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.45 | current |
| hwLicenseEffectServiceAlarm NOTIFICATION-TYPE the license was not activated for the physical interface, the service of the corresponding interface or sub-interface is invaild | 1.3.6.1.4.1.2011.5.25.41.3.46 | current |
| hwLicenseEffectServiceResume NOTIFICATION-TYPE The license has been activated for the physical interface or the service of the corresponding interface and sub-interface has been removed. | 1.3.6.1.4.1.2011.5.25.41.3.47 | current |
| hwTrunkAllMemUpNotify NOTIFICATION-TYPE All trunk members's status change to up. | 1.3.6.1.4.1.2011.5.25.41.3.48 | current |
| hwPhysicalAdminIfDown NOTIFICATION-TYPE The physical manage interface physical status changes to down. | 1.3.6.1.4.1.2011.5.25.41.3.49 | current |
| hwPhysicalAdminIfUp NOTIFICATION-TYPE The physical manage interface physical status changes to up. | 1.3.6.1.4.1.2011.5.25.41.3.50 | current |
| hwLacpPartnerMisconnect NOTIFICATION-TYPE The peer link of the LACP member interface might be incorrectly connected. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.51 | current |
| hwLacpPartnerMisconnectResume NOTIFICATION-TYPE The peer link of the LACP member interface was correctly connected. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. | 1.3.6.1.4.1.2011.5.25.41.3.52 | current |
| hwTrunkMemberChange NOTIFICATION-TYPE Trap message is generated when eth-trunk member changed. | 1.3.6.1.4.1.2011.5.25.41.3.53 | current |
| hwIfMonitorCrcErrorRising NOTIFICATION-TYPE This object indicates that an alarm is generated when a CRC error occurs. | 1.3.6.1.4.1.2011.5.25.41.4.1 | current |
| hwIfMonitorCrcErrorResume NOTIFICATION-TYPE This object indicates that a clear alarm is generated when the CRC error is removed. | 1.3.6.1.4.1.2011.5.25.41.4.2 | current |
| hwIfMonitorSdhErrorRising NOTIFICATION-TYPE This object indicates that an alarm is generated when an SDH B3 error occurs. | 1.3.6.1.4.1.2011.5.25.41.4.3 | current |
| hwIfMonitorSdhErrorResume NOTIFICATION-TYPE This object indicates that a clear alarm is generated when the SDH B3 error is removed. | 1.3.6.1.4.1.2011.5.25.41.4.4 | current |
| hwIfMonitorInputRateRising NOTIFICATION-TYPE Input rate alarm notification | 1.3.6.1.4.1.2011.5.25.41.4.5 | current |
| hwIfMonitorInputRateResume NOTIFICATION-TYPE Input rate alarm resume | 1.3.6.1.4.1.2011.5.25.41.4.6 | current |
| hwIfMonitorOutputRateRising NOTIFICATION-TYPE Output rate alarm notification | 1.3.6.1.4.1.2011.5.25.41.4.7 | current |
| hwIfMonitorOutputRateResume NOTIFICATION-TYPE Output rate alarm resume | 1.3.6.1.4.1.2011.5.25.41.4.8 | current |
| hwIfMonitorHalfDuplexRising NOTIFICATION-TYPE Interface half duplex alarm norification | 1.3.6.1.4.1.2011.5.25.41.4.9 | current |
| hwIfMonitorPauseFrameRising NOTIFICATION-TYPE This object indicates the pause frame alarm. | 1.3.6.1.4.1.2011.5.25.41.4.10 | current |
| hwIfMonitorPauseFrameRisingResume NOTIFICATION-TYPE This object indicates that the pause frame alarm is cleared. | 1.3.6.1.4.1.2011.5.25.41.4.11 | current |
| hwIfPortControlUp NOTIFICATION-TYPE Control Up alarm notification | 1.3.6.1.4.1.2011.5.25.41.4.12 | current |
| hwIfPortControlDown NOTIFICATION-TYPE Control Down alarm notification | 1.3.6.1.4.1.2011.5.25.41.4.13 | current |
| hwIfMonitorSdhB1ErrorRising NOTIFICATION-TYPE This object indicates that an alarm is generated when the number of SDH B1 bit errors exceeds the upper threshold. | 1.3.6.1.4.1.2011.5.25.41.4.14 | current |
| hwIfMonitorSdhB1ErrorResume NOTIFICATION-TYPE This object indicates that a clear alarm is generated when the number of SDH B1 bit errors falls below the upper threshold. | 1.3.6.1.4.1.2011.5.25.41.4.15 | current |
| hwIfMonitorSdhB2ErrorRising NOTIFICATION-TYPE This object indicates that an alarm is generated when the number of SDH B2 bit errors exceeds the upper threshold. | 1.3.6.1.4.1.2011.5.25.41.4.16 | current |
| hwIfMonitorSdhB2ErrorResume NOTIFICATION-TYPE This object indicates that a clear alarm is generated when the number of SDH B2 bit errors falls below the upper threshold. | 1.3.6.1.4.1.2011.5.25.41.4.17 | current |
| hwIfMonitorSymbolErrorRising NOTIFICATION-TYPE This object indicates that an alarm is generated when a symbol error occurs on an interface. | 1.3.6.1.4.1.2011.5.25.41.4.18 | current |
| hwIfMonitorSymbolErrorResume NOTIFICATION-TYPE This object indicates that a clear alarm is generated when the symbol error on the interface is removed. | 1.3.6.1.4.1.2011.5.25.41.4.19 | current |
| hwIfMonitorBadBytesErrorRising NOTIFICATION-TYPE This object indicates that an alarm is generated when the number of bytes of error packets exceeds the upper threshold. | 1.3.6.1.4.1.2011.5.25.41.4.40 | current |
| hwIfMonitorBadBytesErrorResume NOTIFICATION-TYPE This object indicates that a clear alarm is generated when the number of bytes of error packets falls below the upper threshold. | 1.3.6.1.4.1.2011.5.25.41.4.41 | current |
| hwIfMonitorTxPauseFrameRising NOTIFICATION-TYPE This object indicates that an alarm is generated when pause frames are sent. | 1.3.6.1.4.1.2011.5.25.41.4.42 | current |
| hwIfMonitorTxPauseFrameRisingResume NOTIFICATION-TYPE This object indicates that a clear alarm is generated when sending pause frames is stopped. | 1.3.6.1.4.1.2011.5.25.41.4.43 | current |
| hwIfMonitorPostfecErrorRising NOTIFICATION-TYPE The post fec error crooected alarm appears. | 1.3.6.1.4.1.2011.5.25.41.4.44 | current |
| hwIfMonitorPostfecErrorRisingResume NOTIFICATION-TYPE The post fec error crooected alarm disappears. | 1.3.6.1.4.1.2011.5.25.41.4.45 | current |
| hwModeChannelRecvExceedThreshold NOTIFICATION-TYPE The alarm appear when the inflow at the channel mode subinterface exceeds the warning threshold. | 1.3.6.1.4.1.2011.5.25.41.4.46 | current |
| hwModeChannelRecvExceedThresholdResume NOTIFICATION-TYPE The alarm disappear when the inflow at the channel mode subinterface lower than the warning threshold. | 1.3.6.1.4.1.2011.5.25.41.4.47 | current |
| hwModeChannelSendExceedThreshold NOTIFICATION-TYPE The alarm appear when the inflow at the channel mode subinterface exceeds the warning threshold. | 1.3.6.1.4.1.2011.5.25.41.4.48 | current |
| hwModeChannelSendExceedThresholdResume NOTIFICATION-TYPE The alarm disappear when the inflow at the channel mode subinterface lower than the warning threshold. | 1.3.6.1.4.1.2011.5.25.41.4.49 | current |
| hwSubChannelBandwidthRising NOTIFICATION-TYPE The alarm appear when the sum of channel mode subinterfaces bandwitch exceeded the bandwitch of father interface. | 1.3.6.1.4.1.2011.5.25.41.4.50 | current |
| hwSubChannelBandwidthResume NOTIFICATION-TYPE The alarm disappear when the sum of channel mode subinterfaces bandwitch lower than the bandwitch of father interface. | 1.3.6.1.4.1.2011.5.25.41.4.51 | current |
| hwModeChannelRecvExceedGeneralThreshold NOTIFICATION-TYPE The alarm appear when the inflow at the channel mode subinterface exceeds the general threshold. | 1.3.6.1.4.1.2011.5.25.41.4.52 | current |
| hwModeChannelRecvExceedGeneralThresholdResume NOTIFICATION-TYPE The alarm disappear when the inflow at the channel mode subinterface lower than the general threshold. | 1.3.6.1.4.1.2011.5.25.41.4.53 | current |
| hwModeChannelSendExceedGeneralThreshold NOTIFICATION-TYPE The alarm appear when the inflow at the channel mode subinterface exceeds the general threshold. | 1.3.6.1.4.1.2011.5.25.41.4.54 | current |
| hwModeChannelSendExceedGeneralThresholdResume NOTIFICATION-TYPE The alarm disappear when the inflow at the channel mode subinterface lower than the general threshold. | 1.3.6.1.4.1.2011.5.25.41.4.55 | current |
| hwModeChannelRecvExceedSeriousThreshold NOTIFICATION-TYPE The alarm appear when the inflow at the channel mode subinterface exceeds the serious threshold. | 1.3.6.1.4.1.2011.5.25.41.4.56 | current |
| hwModeChannelRecvExceedSeriousThresholdResume NOTIFICATION-TYPE The alarm disappear when the inflow at the channel mode subinterface lower than the serious threshold. | 1.3.6.1.4.1.2011.5.25.41.4.57 | current |
| hwModeChannelSendExceedSeriousThreshold NOTIFICATION-TYPE The alarm appear when the inflow at the channel mode subinterface exceeds the serious threshold. | 1.3.6.1.4.1.2011.5.25.41.4.58 | current |
| hwModeChannelSendExceedSeriousThresholdResume NOTIFICATION-TYPE The alarm disappear when the inflow at the channel mode subinterface lower than the serious threshold. | 1.3.6.1.4.1.2011.5.25.41.4.59 | current |
| hwModeChannelBandwidthAlarm NOTIFICATION-TYPE The alarm appear when the total bandwidth of the channelized sub-interfaces on the same physical interface has exceeded the maximum available bandwidth of the physical interface. | 1.3.6.1.4.1.2011.5.25.41.4.60 | current |
| hwModeChannelBandwidthResume NOTIFICATION-TYPE The alarm disappear when the total bandwidth of the channelized sub-interfaces on the same physical interface less than the maximum available bandwidth of the physical interface. | 1.3.6.1.4.1.2011.5.25.41.4.61 | current |
| hwIfIpAddressChange NOTIFICATION-TYPE IP Trap Group. The trap will be generated when the primary IP address of an interface changes. | 1.3.6.1.4.1.2011.5.25.41.6.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hwTrunkIfGroup OBJECT-GROUP A collection of objects indicating information of IP address of interface, contain IP address, IP address mask and IP address acquiring method. | 1.3.6.1.4.1.2011.5.25.41.2.1.1 | current |
| hwIfIpAddressGroup OBJECT-GROUP A collection of objects indicating attribute of the Trunk interface. | 1.3.6.1.4.1.2011.5.25.41.2.1.2 | current |
| hwIFExtGroup OBJECT-GROUP A collection of objects indicating attribute of interface extended. | 1.3.6.1.4.1.2011.5.25.41.2.1.3 | current |
| hwTrunkMemGroup OBJECT-GROUP Trunk member attribute Group, now only can set hwTrunkPortWeight and hwTrunkPortStandby. hwTrunkSelectStatus and hwTrunkDeleteFlag can't be set. These attributes are for extend. | 1.3.6.1.4.1.2011.5.25.41.2.1.4 | current |
| hwIFFlowStatGroup OBJECT-GROUP A collection of objects indicating interval time of interface flow stat. | 1.3.6.1.4.1.2011.5.25.41.2.1.5 | current |
| hwAdminVrrpMemberIfGroup OBJECT-GROUP A collection of objects indicating attribute of the interface track administrator VRRP. | 1.3.6.1.4.1.2011.5.25.41.2.1.6 | obsolete |
| hwIfEtherStatGroup OBJECT-GROUP Interface statistic Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.7 | current |
| hwIfMonitorThresholdGroup OBJECT-GROUP Alarm Monitor Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.8 | current |
| hwIfMonitorGeneralGroup OBJECT-GROUP Alarm Monitor Enable Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.9 | current |
| hwIfFluxLimitGroup OBJECT-GROUP Flux limit Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.10 | current |
| hwIfDiffServGroup OBJECT-GROUP Interface statistic Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.11 | current |
| hwIfQueryGroup OBJECT-GROUP Interface name Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.12 | current |
| hwLogicIfAttrGroup OBJECT-GROUP Logic interface table Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.13 | current |
| hwIfIpUnnumberedGroup OBJECT-GROUP Logic interface table Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.14 | current |
| hwLinkModeChangeAutoCreateIfGroup OBJECT-GROUP Interface time slot Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.15 | current |
| hwCppsGlobalEnableGroup OBJECT-GROUP A collection of objects indicating global CPU packet statistic function. | 1.3.6.1.4.1.2011.5.25.41.2.1.16 | current |
| hwCppsInterfaceGroup OBJECT-GROUP A collection of objects providing interface configuration function. | 1.3.6.1.4.1.2011.5.25.41.2.1.17 | current |
| hwCppsIfStatisticsGroup OBJECT-GROUP A collection of objects providing packet and byte statistic of the interface sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.2.1.18 | current |
| hwCppsAtmPvcGroup OBJECT-GROUP A collection of objects providing packet and byte statistic for the pvc sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.2.1.19 | current |
| hwCppsPortVlanGroup OBJECT-GROUP A collection of objects providing packet and byte statistic for the port sent to CPU. | 1.3.6.1.4.1.2011.5.25.41.2.1.20 | current |
| hwPortIsolationGroup OBJECT-GROUP Port Isolation Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.21 | current |
| hwVTrunkIfGroup OBJECT-GROUP VTrunk attribute Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.22 | current |
| hwVTrunkMemGroup OBJECT-GROUP VTrunk member attribute Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.23 | current |
| hwLogicIfHelpTableGroup OBJECT-GROUP Logic interface help table Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.24 | current |
| hwSubInterfaceBackupTrunkGroup OBJECT-GROUP SubInterfaceBackupTrunk attribute Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.25 | current |
| hwVaspPortGroup OBJECT-GROUP The vasp port group. | 1.3.6.1.4.1.2011.5.25.41.2.1.26 | current |
| hwLogicIfDynamicHelpTableGroup OBJECT-GROUP Logic interface Dynamic help table Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.27 | current |
| hwIfExtGlobalbGroup OBJECT-GROUP Logic interface Dynamic help table Group. | 1.3.6.1.4.1.2011.5.25.41.2.1.28 | current |
| hwTrunkMapGroup OBJECT-GROUP Tunk map group. | 1.3.6.1.4.1.2011.5.25.41.2.1.29 | current |
| hwModeChannelBandwidthGroup OBJECT-GROUP The total bandwidth of the channelized sub-interfaces alarm monitor group. | 1.3.6.1.4.1.2011.5.25.41.2.1.30 | current |
| hwIFExtCompliance MODULE-COMPLIANCE The compliance statement for entities implementing Huawei extended interface management MIB. | 1.3.6.1.4.1.2011.5.25.41.2.2.1 | current |
| hwIFExtTrapGroup NOTIFICATION-GROUP IF Trap Group. | 1.3.6.1.4.1.2011.5.25.41.5.1.1 | current |
| hwMonitorTrapGroup NOTIFICATION-GROUP Monitor Trap Group. | 1.3.6.1.4.1.2011.5.25.41.5.1.2 | current |