RADLAN-IP
- Registered at
- 1.3.6.1.4.1.89.26
- Last updated
- 2005-09-29 00:00
- Organization
- Radlan Computer Communications Ltd.
- Revisions
- 2005-09-29 00:00
- Namespace
- radlan
- Source file
RADLAN-IP- Digest
sha256:42450718384d266f74c7561c21c288491236eeb52f59248c178a8ac6ef28ed29
Description
The private MIB module definition for IP MIB.
Contact
radlan.com
Imports
| From | Symbols |
|---|---|
| IP-FORWARD-MIB | ipCidrRouteDest, ipCidrRouteEntry, ipCidrRouteMask, ipCidrRouteNextHop, ipCidrRouteTos |
| IP-MIB | ipAddrEntry |
| RADLAN-MIB | rnd |
| RFC1389-MIB | rip2IfConfEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| SNMPv2-TC-v1 | DisplayString |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANA-RTPROTO-MIB IANAifType-MIB IEEE8021-PAE-MIB IF-MIB INET-ADDRESS-MIB IP-FORWARD-MIB IP-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RADLAN-IP RADLAN-MIB RFC1158-MIB RFC1271-MIB RFC1389-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-SMI-v1 SNMPv2-TC SNMPv2-TC-v1 TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rsIpAddrTable OBJECT-TYPE This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects. | 1.3.6.1.4.1.89.26.1 | not-accessible | current | |
| rsIpAddrEntry OBJECT-TYPE The addressing information for one of this entity's IP addresses. | 1.3.6.1.4.1.89.26.1.1 | not-accessible | current | |
| rsIpAdEntAddr OBJECT-TYPE The IP address to which this entry's addressing information pertains. | 1.3.6.1.4.1.89.26.1.1.1 | IpAddress | read-only | current |
| rsIpAdEntIfIndex OBJECT-TYPE The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | 1.3.6.1.4.1.89.26.1.1.2 | INTEGER | read-write | current |
| rsIpAdEntNetMask OBJECT-TYPE The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | 1.3.6.1.4.1.89.26.1.1.3 | IpAddress | read-write | current |
| rsIpAdEntForwardIpBroadcast OBJECT-TYPE This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). | 1.3.6.1.4.1.89.26.1.1.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| rsIpAdEntBackupAddr OBJECT-TYPE In case there are two IP routers in the domain, the address of the second IP router. | 1.3.6.1.4.1.89.26.1.1.5 | IpAddress | read-write | current |
| rsIpAdEntStatus OBJECT-TYPE The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II). | 1.3.6.1.4.1.89.26.1.1.6 | INTEGER {valid(1), invalid(2)} | read-write | current |
| rsIpAdEntBcastAddr OBJECT-TYPE Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1. | 1.3.6.1.4.1.89.26.1.1.7 | INTEGER (0..1) | read-write | current |
| rsIpAdEntArpServer OBJECT-TYPE Indicates whether the router will reply to incoming ARP requests on this interface, providing the physical address corresponding to this IP interface. | 1.3.6.1.4.1.89.26.1.1.8 | INTEGER {enable(1), disable(2)} | read-write | current |
| rsIpAdEntName OBJECT-TYPE The IP Interface name | 1.3.6.1.4.1.89.26.1.1.9 | DisplayString (SIZE(0..30)) | read-write | current |
| rsIpAdEntOwner OBJECT-TYPE The IP Interface owner. Static if interface defined by user, dhcp if received by boot protocol like DHCP and internal for internal usage. | 1.3.6.1.4.1.89.26.1.1.10 | INTEGER {static(1), dhcp(2), internal(3), default(4)} | read-write | current |
| rsIpAdEntAdminStatus OBJECT-TYPE The IP Interface admin status. | 1.3.6.1.4.1.89.26.1.1.11 | INTEGER {up(1), down(2)} | read-write | current |
| rsIpAdEntOperStatus OBJECT-TYPE If active the interface can be used to send and receive frames. | 1.3.6.1.4.1.89.26.1.1.12 | INTEGER {active(1), inactive(2)} | read-only | current |
| icmpSpec OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.2 | |||
| rsIcmpGenErrMsgEnable OBJECT-TYPE This variable controlls the ability to generate ICMP error messages | 1.3.6.1.4.1.89.26.2.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| rsIcmpRdTable OBJECT-TYPE This table contains ICMP Router Discovery parameters configurated per IP interface. | 1.3.6.1.4.1.89.26.2.2 | not-accessible | current | |
| rsIcmpRdEntry OBJECT-TYPE The ICMP parameters configurated for IP interface. | 1.3.6.1.4.1.89.26.2.2.1 | not-accessible | current | |
| rsIcmpRdIpAddr OBJECT-TYPE The IP address to which this entry's information pertains. | 1.3.6.1.4.1.89.26.2.2.1.1 | IpAddress | read-only | current |
| rsIcmpRdIpAdvertAddr OBJECT-TYPE The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255. | 1.3.6.1.4.1.89.26.2.2.1.2 | IpAddress | read-write | current |
| rsIcmpRdMaxAdvertInterval OBJECT-TYPE The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds. | 1.3.6.1.4.1.89.26.2.2.1.3 | INTEGER (4..1800) | read-write | current |
| rsIcmpRdMinAdvertInterval OBJECT-TYPE The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpRdMaxAdvertInterval. | 1.3.6.1.4.1.89.26.2.2.1.4 | INTEGER (3..1800) | read-write | current |
| rsIcmpRdAdvertLifetime OBJECT-TYPE The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval. | 1.3.6.1.4.1.89.26.2.2.1.5 | INTEGER (4..9000) | read-write | current |
| rsIcmpRdAdvertise OBJECT-TYPE A flag indicating whether or not the address is to be advertised. | 1.3.6.1.4.1.89.26.2.2.1.6 | INTEGER {enable(1), disable(2)} | read-write | current |
| rsIcmpRdPreferenceLevel OBJECT-TYPE The preferability of the address as a default router address, relative to other router addresses on the same subnet. | 1.3.6.1.4.1.89.26.2.2.1.7 | INTEGER | read-write | current |
| rsIcmpRdEntStatus OBJECT-TYPE Setting of any value to this object set values of all fields to the default values. | 1.3.6.1.4.1.89.26.2.2.1.8 | INTEGER | read-write | current |
| rip2Spec OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.3 | |||
| arpSpec OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.4 | |||
| rsArpDeleteTable OBJECT-TYPE Setting to value deleteArpTab(1): deletes the arp table - static and dynamic entries deleteIpArpDynamicEntries(2): delete all dynamic entries deleteIpArpStaticEntries(3): delete all static entries deleteIpArpDelDynamicRefreshStatic(4) - delete all dynamic - refresh static, thus refrashing FFT. on get returns the last action | 1.3.6.1.4.1.89.26.4.1 | INTEGER {noAction(0), deleteArpTab(1), deleteIpArpDynamicEntries(2), deleteIpArpStaticEntries(3), deleteIpArpDelDynamicRefreshStatic(4)} | read-write | current |
| rsArpInactiveTimeOut OBJECT-TYPE This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table. | 1.3.6.1.4.1.89.26.4.2 | Unsigned32 (1..40000000) | read-write | current |
| rsArpProxy OBJECT-TYPE When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses. | 1.3.6.1.4.1.89.26.4.3 | INTEGER {enable(1), disable(2)} | read-write | current |
| rsArpRequestsSent OBJECT-TYPE Displays how many ARP requests have been sent out to an ARP server for address resolution. | 1.3.6.1.4.1.89.26.4.4 | Counter32 | read-only | current |
| rsArpRepliesSent OBJECT-TYPE Displays how many ARP replies have been sent out to an ARP client in response to request packets. | 1.3.6.1.4.1.89.26.4.5 | Counter32 | read-only | current |
| rsArpProxyRepliesSent OBJECT-TYPE Displays how many proxy ARP replies have been sent out in response to request packets. A proxy router serving as a gateway to a subnet would respond with a proxy reply. | 1.3.6.1.4.1.89.26.4.6 | Counter32 | read-only | current |
| rsArpUnresolveTimer OBJECT-TYPE Specifies the frequency in seconds in which to send out ARP requests to resolve the Next Hop MAC address. | 1.3.6.1.4.1.89.26.4.7 | INTEGER | read-write | current |
| rsArpMibVersion OBJECT-TYPE MIB's version, the current version is 2. Version 1: rsArpDeleteTable Setting this object to any not-null value has the effect of deleting all entries of the ARP table. Version 2: rsArpDeleteTable Setting to value deleteArpTab(1): deletes the arp table - static and dynamic entries deleteIpArpDynamicEntries(2): delete all dynamic entries deleteIpArpStaticEntries(3): delete all static entries deleteIpArpDelDynamicRefreshStatic(4): delete all dynamic - refresh static, thus refrashing FFT. on get returns the last action. New MIB variables support: rsArpRequestsSent rsArpRepliesSent rsArpProxyRepliesSent rsArpUnresolveTimer rsArpMibVersion | 1.3.6.1.4.1.89.26.4.8 | INTEGER | read-only | current |
| tftp OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.5 | |||
| rsTftpRetryTimeOut OBJECT-TYPE General Retransmission time-out value (seconds) | 1.3.6.1.4.1.89.26.5.1 | INTEGER | read-write | current |
| rsTftpTotalTimeOut OBJECT-TYPE Total Retransmission time-out value (seconds) | 1.3.6.1.4.1.89.26.5.2 | INTEGER | read-write | current |
| rsSendConfigFile OBJECT-TYPE The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address. | 1.3.6.1.4.1.89.26.5.3 | DisplayString | read-write | current |
| rsGetConfigFile OBJECT-TYPE The file name include path where the Router Server will get the full configuration from. The default destination address will be the sender address. | 1.3.6.1.4.1.89.26.5.4 | DisplayString | read-write | current |
| rsLoadSoftware OBJECT-TYPE The file name include path where the Router Server will get the software. The default source address will be the sender address. | 1.3.6.1.4.1.89.26.5.5 | DisplayString | read-write | current |
| rsFileServerAddress OBJECT-TYPE The IP address of the configuration / sw server. | 1.3.6.1.4.1.89.26.5.6 | IpAddress | read-write | current |
| rsSoftwareDeviceName OBJECT-TYPE The Software Device Name specifies a device name, using this Software | 1.3.6.1.4.1.89.26.5.7 | DisplayString (SIZE(1..8)) | read-write | current |
| rsSoftwareFileAction OBJECT-TYPE Holds the current action done on the software file | 1.3.6.1.4.1.89.26.5.8 | INTEGER {download(1), upload(2)} | read-write | current |
| ipRedundancy OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.6 | |||
| ipRouteLeaking OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.7 | |||
| ipRipFilter OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.8 | |||
| rsRipEnable OBJECT-TYPE Enables or disables RIP. | 1.3.6.1.4.1.89.26.9 | INTEGER {enable(1), disable(2)} | read-write | current |
| rsTelnetPassword OBJECT-TYPE | 1.3.6.1.4.1.89.26.11 | OCTET STRING | read-write | current |
| rlTranslationNameToIpTable OBJECT-TYPE This table translates IP interfaces's name to IP interface's address | 1.3.6.1.4.1.89.26.12 | not-accessible | current | |
| rlTranslationNameToIpEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.26.12.1 | not-accessible | current | |
| rlTranslationNameToIpName OBJECT-TYPE The IP Interface name | 1.3.6.1.4.1.89.26.12.1.1 | DisplayString (SIZE(1..30)) | read-only | current |
| rlTranslationNameToIpIpAddr OBJECT-TYPE The IP Interface address | 1.3.6.1.4.1.89.26.12.1.2 | IpAddress | read-only | current |
| rlIpRoutingProtPreference OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.13 | |||
| rlOspf OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.14 | |||
| rlIpAddrTableMibVersion OBJECT-TYPE The IpAddrTable MIB's version. | 1.3.6.1.4.1.89.26.15 | INTEGER | read-only | current |
| rlIpCidrRouteExtTable OBJECT-TYPE Augmenting ipCidrRouteTable (ip forwarfing information table) for added info as read only | 1.3.6.1.4.1.89.26.16 | not-accessible | current | |
| rlIpCidrRouteExtEntry OBJECT-TYPE A row of the table ipCidrRouteTable Extended by this definition. | 1.3.6.1.4.1.89.26.16.1 | not-accessible | current | |
| rlIpCidrRouteProto OBJECT-TYPE Added infor for ipCidrRouteTable. extends the info of ipCidrRouteProto to show the route inner protocol. Allowes the user to see which type of route in the protocol e.g. ospf internal, ospf external. | 1.3.6.1.4.1.89.26.16.1.1 | INTEGER {local(1), netmgmt(2), rip(3), ospfInternal(4), ospfExternal(5), ospfAggregateNetRange(6), bgp4Internal(7), bgp4External(8), aggregateRoute(9), other(10)} | read-only | current |
| rlIpStaticRoute OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.17 | |||
| rlIpStaticRouteTable OBJECT-TYPE This entity's static (user configured) IP Routing table. entries are MAX-ACCESSible even if not used for forwarding | 1.3.6.1.4.1.89.26.17.1 | not-accessible | current | |
| rlIpStaticRouteEntry OBJECT-TYPE A particular Static(user configured) route to a particular destina- tion, under a particular policy. | 1.3.6.1.4.1.89.26.17.1.1 | not-accessible | current | |
| rlIpStaticRouteDest OBJECT-TYPE The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the rlIpStaticRouteMask object is not equal to x. | 1.3.6.1.4.1.89.26.17.1.1.1 | IpAddress | read-only | current |
| rlIpStaticRouteMask OBJECT-TYPE Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rlIpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rlIpStaticRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the rlIpStaticRouteDest object is not equal to ipCidrRoute- Dest. | 1.3.6.1.4.1.89.26.17.1.1.2 | IpAddress | read-only | current |
| rlIpStaticRouteTos OBJECT-TYPE See ipCidrRouteTos definition For now only value 0 is valid | 1.3.6.1.4.1.89.26.17.1.1.3 | INTEGER | read-only | current |
| rlIpStaticRouteNextHop OBJECT-TYPE On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. | 1.3.6.1.4.1.89.26.17.1.1.4 | IpAddress | read-only | current |
| rlIpStaticRouteMetric OBJECT-TYPE The routing metric for this route. The semantics of this metric are determined by the user. normal semantic will be next hop count or some administarative distance to create routing policy. | 1.3.6.1.4.1.89.26.17.1.1.5 | INTEGER | read-write | current |
| rlIpStaticRouteType OBJECT-TYPE The type of route. Note that local(3) refers to a route for which the next hop is the final destination this is the case when user overides the a local interface entry to change it parameters; remote(4) refers to a route for which the next hop is not the final destina- tion. reject (2) refers to a route which, if matched, discards the message as unreachable. This is may be used as a means of correctly aggregating routes, When static routes are distributed (leaked) to other protocols. | 1.3.6.1.4.1.89.26.17.1.1.6 | INTEGER {reject(1), local(2), remote(3)} | read-write | current |
| rlIpStaticRouteNextHopAS OBJECT-TYPE The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero. | 1.3.6.1.4.1.89.26.17.1.1.7 | INTEGER | read-write | current |
| rlIpStaticRouteForwardingStatus OBJECT-TYPE active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is configured is down. (Note: ip interface down may be for two reason - its admin status or the L2 interface , on which the ip interface is configured, status | 1.3.6.1.4.1.89.26.17.1.1.8 | INTEGER {active(1), inactive(2)} | read-only | current |
| rlIpStaticRouteRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.89.26.17.1.1.9 | RowStatus | read-write | current |
| rlIpStaticRouteOwner OBJECT-TYPE Static - The route is configured over Static IP. This route is written to configuration files. Dhcp - The route is Configured by DHCP (received as part of DHCP configuration) This route IS NOT written to configuration files Dhcp - The route is Configured default system config exist till any other configuration is applied | 1.3.6.1.4.1.89.26.17.1.1.10 | INTEGER {static(1), dhcp(2), default(3)} | read-only | current |
| rlIpRouter OBJECT-IDENTITY | 1.3.6.1.4.1.89.26.18 |