TIMETRA-SUBSCRIBER-MGMT-MIB

TEXTUAL-CONVENTION

The TOverruleFilterId data type represents filter Id info that is used to override the filter-id info specified in the sla-profile. The value '0' indicates that no filter overrule is requested, The value 'FFFFFFFF'H indicates a request to apply no filter (i.e. an overrule request with no filter). Any other value can be interpreted using the description which can be found in TIMETRA-FILTER-MIB::TAnyFilterID.

TEXTUAL-CONVENTION

The TmnxEvpnImportMode data type is an enumerated integer that indicates the import mode for an EVPN.

TEXTUAL-CONVENTION

The TmnxEvpnPrefixRouteResolution data type is an enumerated integer that indicates show prefix routes should be resolved.

TEXTUAL-CONVENTION

The TmnxLacSteeringOperState data type is an enumerated integer that describes the possible states of L2TP Lac steering.

TEXTUAL-CONVENTION

The TmnxPccRuleMonitorKey data type defines the monitor key name that can be received in a PCC rule. An empty string (length 0) indicates that no monitor key is defined in the PCC rule.

TEXTUAL-CONVENTION

The TmnxPccRuleName data type defines the name of a PCC rule.

TEXTUAL-CONVENTION

PCC-rule policer CBS

TEXTUAL-CONVENTION

PCC-rule policer MBS

TEXTUAL-CONVENTION

PCC-rule policer parent arbiter name.

TEXTUAL-CONVENTION

PCC-rule policer parent level

TEXTUAL-CONVENTION

PCC-rule policer parent weight

TEXTUAL-CONVENTION

PCC-rule policer packet-byte-offset

TEXTUAL-CONVENTION

PCC-rule policer stat-mode

TEXTUAL-CONVENTION

The TmnxPccRuleStatus data type is an enumerated integer that describes the possible states of a PCC-rule.

TEXTUAL-CONVENTION

The TmnxSubAcctPlcyAccountingType data type is an enumerated integer that indicates which accounting messages are sent.

TEXTUAL-CONVENTION

The TmnxSubAcctPlcySessionIdFormat data type is an enumerated integer that indicates the format for the acct-session-id attribute used in RADIUS accounting requests.

TEXTUAL-CONVENTION

The TmnxSubActivityThreshold data type is an unsigned number that indicates the threshold in Kbps that is applied to determine if a subscriber is active. If the traffic volume is below the threshold, the subscriber is idle. Otherwise, the subscriber is active.

TEXTUAL-CONVENTION

The TmnxSubAddrContextAllocationType data type is an enumerated integer that indicates when the original context and IP address for a binding between a host MAC address and its IP address are allocated and released. The original context can be a DHCP lease or a managed host; a DHCP lease context corresponds to a conceptual row in the the TIMETRA-SERV-MIB::svcDhcpLeaseTable; a managed host context corresponds to a conceptual row in the tmnxSubMngdHostTable; 'dynamic' : the original context is created and the IP address allocated after the binding is made; the original context is destroyed after the idle timer has expired; the IP address is released after the context timer has expired; 'static' : the original context is created/destroyed when this row is created/destroyed; 'stickyIpAddress' : the original context is released after its idle timer has expired; the IP address remains allocated after the lease timer has expired. 'offered': the system has offered an IP address, but the host did not yet request it; this is a transitory state, that either disappears or changes into 'dynamic'. 'public': the system received a public IPv4 address from a Radius server (Framed-IP-Address); stickiness, if any, of the association between the IPv4 address and the host MAC address is not guaranteed by this system but by the Radius server. 'notApplicable': there is no such context; examples: IPv6 hosts using an IP address received from Radius (Framed-IP-Address).

TEXTUAL-CONVENTION

The TmnxSubAdminStatus data type is an enumerated integer that describes the values used to identify the administrative state.

TEXTUAL-CONVENTION

The TmnxSubAuthPlcyUserNameAppend data type is an enumerated integer that indicates what needs to be appended to the user-name sent to the RADIUS server.

TEXTUAL-CONVENTION

The TmnxSubAuthPlcyUserNameFormat data type is an enumerated integer that indicates the format used to identify the user towards the RADIUS server.

TEXTUAL-CONVENTION

The TmnxSubAuthPppoeAccessMethod data type is an enumerated integer that indicates the authentication method used towards the RADIUS server in case the policy is used for PPPoE: - none (1) : indicates that no PPPoE authentication is done - padi (2) : indicates that authentication is done based on the received PADI packet - pap-chap (3) : indicates that PAP/CHAP authentication is done.

TEXTUAL-CONVENTION

The TmnxSubAutoSubIdKey data type is an enumerated integer that specifies which string is used as base for the auto-generated subscriber identification

TEXTUAL-CONVENTION

The data type TmnxSubBondingConnId is an unsigned integer that represents the index of the Bonding Connection.

TEXTUAL-CONVENTION

The data type TmnxSubBrgId is a string that represents the identifier of a Bridged Residential Gateway.

TEXTUAL-CONVENTION

The data type TmnxSubBrgIdOrEmpty is a string that represents the identifier of a Bridged Residential Gateway, or, if it is empty, the absence of such an identifier.

TEXTUAL-CONVENTION

The TmnxSubCcAccountedResource data type is an enumerated integer that specifies what action property is used for accounting and credit control.

TEXTUAL-CONVENTION

The TmnxSubCcAccountedResource data type is an enumerated integer that specifies what action property is used for accounting and credit control.

TEXTUAL-CONVENTION

The TmnxSubCcErrorAction data type is an enumerated integer that specifies what action is to be taken when an error condition is met.

TEXTUAL-CONVENTION

The TmnxSubCcOutOfCreditAction data type is an enumerated integer that specifies what action is to be taken when running out of credit.

TEXTUAL-CONVENTION

The TmnxSubDirection data type is an enumerated integer that indicates whether the data applies to ingress or egress direction.

TEXTUAL-CONVENTION

TmnxSubEgrPolicerStatMode specifies the mode of statistics collected by this egress policer.

TEXTUAL-CONVENTION

The QoS information in the APN-AMBR IE of an incoming GTP message is mapped to an SROS QoS override object. The TmnxSubGtpPlcyApnAmbrQMapDlType data type is an enumerated integer that indicates the kind of SROS QoS object the override applies to. For the downlink, this can be an aggregate rate, an arbiter, a policer, a queue or a scheduler. - noMapping (0): No mapping. - arbiter (1): Map to an arbiter. - policer (2): Map to a policer. - queue (3): Map to a queue. - scheduler (4): Map to a scheduler. - aggregateRate (5): Map to an aggregate rate.

TEXTUAL-CONVENTION

The QoS information in the APN-AMBR IE of an incoming GTP message is mapped to an SROS QoS override object. The TmnxSubGtpPlcyApnAmbrQMapUlType data type is an enumerated integer that indicates the kind of SROS QoS object the override applies to. For the uplink, this can be an arbiter, a policer, a queue or a scheduler. - noMapping (0): No mapping. - arbiter (1): Map to an arbiter. - policer (2): Map to a policer. - queue (3): Map to a queue. - scheduler (4): Map to a scheduler.

TEXTUAL-CONVENTION

The TmnxSubHQosMgmtStatus data type is an enumerated integer that describes the values used to identify hqos management state of policers.

TEXTUAL-CONVENTION

The TmnxSubHostOrigin data type is a bitfield that indicates the origin of the specific subscriber host: - staticHost (0): created as result of a static host (TIMETRA-SAP-MIB::sapStaticHostTable) - dhcpLease (1): created as result of a DHCP lease state (TIMETRA-SERV-MIB::svcDhcpLeaseStateTable) - nonSubTraffic (2): created as result of non-sub-traffic parameters (TIMETRA-SAP-MIB::sapSubMgmtNonSubTraffic) - pppoeSession (3): created as result of a PPPoE session (TIMETRA-PPPOE-MIB::tmnxPppoeSessionTable) - arpHost (4): created as result of an ARP host (TIMETRA-SERV-MIB::svcArpHostTable) - ipcpSession (5): created as result of a PPPoE or L2TP (LNS) IPCP session - l2tpSession (6): created as result of a PPPoE or L2TP (LNS) LAC session - pppSLAAC (7): created as result of a PPPoE or L2TP (LNS) IPV6CP (IPv6 Control Protocol) session - pppDhcp6 (8): created as result of a PPPoE or L2TP (LNS) DHCP6 lease state - ipoeDhcp6 (9): created as result of an DHCP6 lease state (TIMETRA-SERV-MIB::svcDhcpLeaseStateTable) - ipoeSLAAC (10): created as result of an IPoE slaac host - wpp (11): created as result of a Web Portal request - staticHost6 (12): created as result of a static host (TIMETRA-SAP-MIB::sapStatHost6Table) - mngdHostDataTrigger (13): created as a result of a data triggered managed host - mngdHostAaa (14): created as a result of a aaa managed host - mngdHostGtp (15): created as a result of a GTP managed host - mngdHostBonding (16): created as a result of a bonding-type managed host

TEXTUAL-CONVENTION

The TmnxSubHostTrkStatsType data type is an enumerated integer that indicates a type of host tracking statistics.

TEXTUAL-CONVENTION

TmnxSubIngPolicerStatMode specifies the mode of statistics collected by this ingress policer.

TEXTUAL-CONVENTION

Indicates the method for host matching.

TEXTUAL-CONVENTION

The TmnxSubManagedHostType data type is an enumerated integer that indicates the type of a managed host, distinguished by how it is created. The value 'dataTriggered' means that this system created the host upon processing data traffic. The value 'aaa' means that this system created the host upon processing messages from an Authentication, Authorization, and Accounting (AAA) server.

TEXTUAL-CONVENTION

The TmnxSubOperStatus data type is an enumerated integer that describes the values used to identify the operational state.

TEXTUAL-CONVENTION

The TmnxSubOvrBurstPercent data type is an integer that indicates the override percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. The value -2 indicates that the value is not overridden.

TEXTUAL-CONVENTION

The TmnxSubOvrBurstSize data type is an integer that indicates the override amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. The value -2 indicates that the value is not overridden.

TEXTUAL-CONVENTION

The TmnxSubPolicersEgress data type is a bitfield that indicates a set of egress policers

TEXTUAL-CONVENTION

The TmnxSubPolicersIngress data type is a bitfield that indicates a set of ingress policers

TEXTUAL-CONVENTION

The TmnxSubPppTerminationType indicates how the subscriber PPP session is terminated.

TEXTUAL-CONVENTION

The TmnxSubPppType data type is an enumerated integer that describes the values used to identify the type of subscriber PPP session.

TEXTUAL-CONVENTION

The TmnxSubProfEgrEncapOffset data type is an enumerated integer that specifies what offset will be used for in the calculation of the packet encapsulation overhead.

TEXTUAL-CONVENTION

The TmnxSubQueueOrPolicer data type is an enumerated integer that indicates whether the data applies to a queue or a policer.

TEXTUAL-CONVENTION

The TmnxSubQueuesEgress data type is a bitfield that indicates a set of egress queues

TEXTUAL-CONVENTION

The TmnxSubQueuesIngress data type is a bitfield that indicates a set of ingress queues

TEXTUAL-CONVENTION

The TmnxSubReportRateType data type is an enumerated integer that indicates what rate will be reported when creating an L2TP session: - maximum (0): Take the port rate. - aggRateLimit (1): Take the aggregate rate as received from the RADIUS Access-Accept message in VSA 'Alc-Subscriber-QoS-Override'. When this RADIUS VSA is not present in the Access-Accept or when RADIUS is not used then take the configured aggregate rate limit; in case none is configured then take the port rate. - namedScheduler (2): Take the rate of the specified scheduler, in case the scheduler is not linked with the scheduler policy from the subscriber profile then take the port rate. - pppoeActualRate (3): Take the rate from the DSL-Forum Vendor-Specific PPPoE Tag when available, otherwise take the port rate. - rfc5515ActualRate (4): Put the same value as the transmitted Actual-Data-Rate-Upstream AVP in the Rx-Connect-Speed AVP, and the same value as the transmitted Actual-Data-Rate-Downstream AVP in the Tx-Connect-Speed AVP. - policerId (5): Take the rate of the specified policer, in case the policer is not linked with the policer from the sla-profile then take the port rate.

TEXTUAL-CONVENTION

The TmnxSubSLAProfHostLimit data type is an integer that indicates the maximum number of hosts using a given SLA (Service Level Agreement) profile. The value -1 indicates that there is no limit. 0 is not allowed

TEXTUAL-CONVENTION

The TmnxSubSLAProfHostLimit2 data type is an integer that indicates the maximum number of hosts using a given SLA (Service Level Agreement) profile. The value -1 indicates that there is no limit.

TEXTUAL-CONVENTION

The TmnxSubAcctPlcySessionIdFormat data type is an enumerated integer that indicates the format for the acct-session-id attribute used in RADIUS accounting requests.

TEXTUAL-CONVENTION

Indicates the originator of the provided information.

TEXTUAL-CONVENTION

The TmnxVasFilterEntryActionDir data type is an enumerated integer that indicates the direction for the action in a VAS filter entry.

TEXTUAL-CONVENTION

The TmnxVasFilterFailAction data type is an enumerated integer that indicates the fail action for a VAS filter entry.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

The tmnxSubAuthPlcyTable allows configuration of subscriber Radius authentication policy parameters.

OBJECT-TYPE

tmnxSubAuthPlcyEntry is an entry (conceptual row) in the tmnxSubAuthPlcyTable. Each entry represents the configuration for a RADIUS policy. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubAuthPlcyRowStatus. Entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tmnxSubAuthPlcyName specifies a specific subscriber authentication policy.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRowStatus controls the creation and deletion of rows in the table. An attempt to delete a row that is referred to in vRtrIfDHCPAuthPolicy will fail with an inconsistentValue error.

OBJECT-TYPE

The value of tmnxSubAuthPlcyLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this Policy.

OBJECT-TYPE

The value of tmnxSubAuthPlcyDescription specifies the user provided description of this subscriber authentication policy.

OBJECT-TYPE

The value of tmnxSubAuthPlcyPassword specifies the password associated with the user for going to the RADIUS server. An empty string is returned on SNMP GET requests.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadAuthRetries specifies the number of RADIUS requests towards the same RADIUS server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadAuthSrceAddr specifies the source address of a radius packet for subscriber authentication. It must be a valid unicast address (otherwise a wrongValue error is returned). If this object is configured with the address of the router interface (ref TIMETRA-VRTR-MIB::vRiaIpAddress) the Radius client uses it while making a request to the server. If the address is not configured or is not the address of one of the interfaces, the source address is based on the address of the Radius server. If the server address is in-band, the client uses the system ip address. If it is out-of-band, the source address is the address of the management interface (The addresses can be found in TIMETRA-VRTR-MIB::vRiaIpAddress).

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadAuthSrceAddrTp specifies the type of host address stored in tmnxSubAuthPlcyRadAuthSrceAddr.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadAuthTimeout specifies, in seconds, between authentication request retries towards the same RADIUS server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyReAuthenticate specifies whether authentication must be re-issued when the DHCP lease timer expires. This field is only applicable for DHCP authentication.

OBJECT-TYPE

The value of tmnxSubAuthPlcyUserNameFormat specifies how the user is represented when contacting RADIUS server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadAuthVRtrID specifies the virtual router instance applicable for the set of configured RADIUS servers (tmnxSubAuthPlcyRadServTable). The value of this object cannot be changed once an RADIUS server is configured for this policy. When the value is '0', both base and management router instances are matched.

OBJECT-TYPE

The value of tmnxSubAuthPlcyAcceptAuthChange specifies whether or not the system should handle the CoA messages initiated by the RADIUS server, and provide for mid-session interval changes of policies applicable to subscriber hosts.

OBJECT-TYPE

The value of tmnxSubAuthPlcyInclAttributes specifies what RADIUS attributes the system should include into RADIUS authentication request messages.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadAuthAlgorithm specifies the algorithm used to select a RADIUS server from the list of configured servers (tmnxSubAuthPlcyRadServTable).

OBJECT-TYPE

The value of tmnxSubAuthPlcyPppoeAccessMethod specifies the authentication method used to authenticate PPPoE towards the RADIUS server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyNasPortPfixType specifies what type of prefix will be added to the NAS-Port attribute if included in RADIUS authentication request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAuthPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAuthPlcyNasPortPfixString specifies the user configurable string to be added as prefix to the NAS-Port attribute if included in RADIUS authentication request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAuthPlcyInclAttributes and tmnxSubAuthPlcyNasPortPfixType is set to 'userString'.

OBJECT-TYPE

The value of tmnxSubAuthPlcyNasPortSfixType specifies what type of suffix will be added to the NAS-Port attribute if included in RADIUS authentication request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAuthPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAuthPlcyUserNameAppend specifies what will be appended to the user-name sent to the RADIUS server. When the value is 'nothing', the user-name will be created as indicated by tmnxSubAuthPlcyUserNameFormat. When the value is 'domainName', the user-name will be created as indicated by tmnxSubAuthPlcyUserNameFormat, appended by '@' and a domain name if returned via a lookup in the local user database (TIMETRA-LOCAL-USER-DB-MIB::tmnxLocUsrDbDhcpDomainName). From release 8.0R4 onwards, use 'tmnxSubAuthPlcyUserNameOp' instead; the value of this object is ignored if the value of 'tmnxSubAuthPlcyUserNameOp' is different from 'noOperation'.

OBJECT-TYPE

The value of tmnxSubAuthPlcyFallbackAction specifies the authentication action in case no RADIUS server is available. When the value is 'deny', all hosts are denied access. When the value is 'accept', all hosts are granted access. When the value is 'userDb', the local user database identified by the value of the object tmnxSubAuthPlcyFallbackUserDb' is used for authentication. The value of this object must be set together with the value of the object tmnxSubAuthPlcyFallbackUserDb.

OBJECT-TYPE

The value of tmnxSubAuthPlcyFallbackUserDb specifies the local user database to use for authentication while no RADIUS server is available. This object is only relevant while the value of the object 'tmnxSubAuthPlcyFallbackAction' is equal to 'userDb'. The value of this object must be set together with the value of the object tmnxSubAuthPlcyFallbackAction.

OBJECT-TYPE

The value of tmnxSubAuthPlcyClngStationIdType specifies what string will be put in the RADIUS Calling-Station-Id attribute if included in RADIUS authentication request messages. This field is only applicable if the 'callingStationId' bit is set in tmnxSubAuthPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAuthPlcyNasPortTypeType specifies what kind of value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS authentication request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxSubAuthPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAuthPlcyNasPortTypeValue specifies what value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS authentication request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxSubAuthPlcyInclAttributes and the value of the object tmnxSubAuthPlcyNasPortTypeType is equal to 'config'.

OBJECT-TYPE

The value of tmnxSubAuthPlcyPppUserNameOp specifies the operation to perform on the PAP/CHAP user name. When the value is 'appendDomain', the string specified by 'tmnxSubAuthPlcyPppDomain', preceded with a '@', is appended to the PAP/CHAP user name. When the value is 'stripDomain', any '@' character and all subsequent characters are removed from the PAP/CHAP user name. When the value is 'replaceDomain', all characters after a '@' delimiter are replaced with the string specified by 'tmnxSubAuthPlcyPppDomain'. When the value is 'defaultDomain', the same action is performed as with 'appendDomain', but only if the PAP/CHAP user name does not contain a domain name already.

OBJECT-TYPE

The value of tmnxSubAuthPlcyPppDomain specifies the domain name to use with PAP/CHAP user name operations. This object is only relevant while the value of the object 'tmnxSubAuthPlcyPppUserNameOp' is equal to 'appendDomain', 'replaceDomain' or 'defaultDomain'.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadAuthDownTime specifies the hold down time. If a RADIUS authentication server that was considered 'down' becomes responsive again, the system waits for this amount of time before it starts to address that server again.

OBJECT-TYPE

The value of tmnxSubAuthPlcyUserNameOp specifies the operation to perform on the user name of DHCP hosts before transmitting it to the RADIUS server. When the value is 'appendDomain', the string specified by 'tmnxSubAuthPlcyDomain', preceded with a '@', is appended to the user name; if the value of 'tmnxSubAuthPlcyDomain' is empty, the domain name string is retrieved from the local user database (TIMETRA-LOCAL-USER-DB-MIB::tmnxLocUsrDbDhcpDomainName) When the value is 'stripDomain', any '@' character and all subsequent characters are removed from the user name. When the value is 'replaceDomain', all characters after a '@' delimiter are replaced with the string specified by 'tmnxSubAuthPlcyDomain'. When the value is 'defaultDomain', the same action is performed as with 'appendDomain', but only if the user name does not contain a domain name already. When the value is 'noOperation', the value of 'tmnxSubAuthPlcyUserNameAppend' is considered, for backwards compatibility with release 8.0R1, 8.0R2 and 8.0R3.

OBJECT-TYPE

The value of tmnxSubAuthPlcyDomain specifies the domain name to use with user name operations. This object is only relevant while the value of the object 'tmnxSubAuthPlcyUserNameOp' is equal to 'appendDomain', 'replaceDomain' or 'defaultDomain'.

OBJECT-TYPE

The value of tmnxSubAuthPlcyUserNameMacFormat specifies how a MAC address is represented when contacting a RADIUS server. This is only used while the value of tmnxSubAuthPlcyUserNameFormat is equal to 'dhcpClientVendorOpts' and if the MAC address is used by default of DHCP client vendor options. Examples: 'ab:' 00:0c:f1:99:85:b8 Nokia SROS style 'XY-' 00-0C-F1-99-85-B8 IEEE canonical style 'mmmm.' 0002.03aa.abff Cisco style.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadRespAttrSelect specifies if the rows in the tmnxSubRadiusAcceptTable are considered to selectively accept attributes in the authentication response messages. While the value of tmnxSubAuthPlcyRadRespAttrSelect is equal to 'false', the rows in the tmnxSubRadiusAcceptTable associated with this authentication policy are ignored, and all attributes are accepted.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRequestScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the outgoing Access-Request messages.

OBJECT-TYPE

The value of tmnxSubAuthPlcyAcceptScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the incoming Access-Accept messages.

OBJECT-TYPE

The value of tmnxSubAuthPlcyCoAScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the incoming Change-of-Authorization messages.

OBJECT-TYPE

The value of tmnxSubAuthPlcyAcctSessionIdType specifies the accounting session ID type if included in RADIUS authentication request messages. This field is only applicable if the 'acctSessionId' bit is set in tmnxSubAuthPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAuthPlcyNasPortBitspec specifies what number will be put in the RADIUS NAS-Port attribute if included in RADIUS authentication request messages. This field is only applicable if the 'nasPort' bit is set in tmnxSubAuthPlcyInclAttributes. <origin> ::= 'o' | 'i' | 's' | 'm' | 'p' | 'v' | 'c' 'c' - ATM VCI (Virtual Channel Identifier) 'i' - inner VLAN ID 'm' - MDA number 'o' - outer VLAN ID 'p' - port number 's' - slot number 'v' - ATM VPI (Virtual Path Identifier) Maximum 32 bits can be specified. If less than 32 bits are specified, the least significant bits are used and the omitted higher bits are set to zero. Example: *12o*12i*2s01 means 'the 12 least significant bits of the outer VLAN ID, followed by the 12 least significant bits of the inner VLAN ID, followed by the two least significant bits of the slot number, followed by a zero bit and a one bit', stored in network order in the least significant bits: 0000ooooooooooooiiiiiiiiiiiiss01.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadiusServerPlcy specifies the RADIUS server policy as defined in TIMETRA-RADIUS-MIB::tmnxRadSrvPlcyTable to be applied in this subscriber authentication policy.

OBJECT-TYPE

The value of tmnxSubAuthPlcyAcctStopOnFail specifies if and in what failure condition a RADIUS accounting-stop message indicating the failure has to be sent. - onRequestFailure: RADIUS Access-Request message could not be sent (e.g. no server configured, or timeout). - onReject: Reception of a RADIUS Access-Reject message. - onAcceptFailure: A failure occurred after the reception of a RADIUS Access-Accept message (e.g. duplicate IP address).

OBJECT-TYPE

The value of tmnxSubAuthPlcyFallbackForceProb specifies if the RADIUS servers are probed, although in 'out-of-service' state, or not. In case force-probing is true, the RADIUS servers are probed before the hold-time expires and the action in fallback is followed. In case force-probing is false, the action in fallback is followed after the hold-time has expired (default).

OBJECT-TYPE

The value of tmnxSubAuthPlcyGtpUserNameFormat specifies how the username is represented when contacting a RADIUS server. This is only used while the value of tmnxSubAuthPlcyUserNameFormat is equal to 'gtp-user-name' and if no PAP authentication is requested via the PCO options

OBJECT-TYPE

The tmnxSubAuthPlcyRadServTable has an entry for each RADIUS server used for subscriber authentication.

OBJECT-TYPE

tmnxSubAuthPlcyRadServEntry is an entry (conceptual row) in the tmnxSubAuthPlcyRadServTable. Each entry represents the configuration for a RADIUS server. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubAuthPlcyRadServRowStatus. Entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServPlcyName specifies a specific subscriber authentication policy in tmnxSubAuthPlcyTable to which this radius server is connected. Row creation will be denied if no policy with the same name occurs in the tmnxSubAuthPlcyTable.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServIndex specifies a specific radius server in the policy.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServRowStatus controls the creation and deletion of rows in the table.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this policy server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServAddress specifies the IP address of the RADIUS server. A valid unicast IP address must be specified for row creation to succeed.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServAddrType specifies the type of address stored in tmnxSubAuthPlcyRadServAddress.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServSecret specifies the secret key associated with the RADIUS server. An empty key is not accepted on input. An empty string is however returned by the system on any GET request.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServAuthPort specifies the UDP port number on which to contact the RADIUS server for authentication.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServOperState indicates the operational state of the RADIUS server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServCoAOnly specifies if this RADIUS server is restricted to sending Change-of-Authorization messages only (not authentication requests). There can be maximum 16 of these CoA-only servers associated with a single authentication policy. If the value of tmnxSubAuthPlcyRadServCoAOnly is equal to 'true', the value of tmnxSubAuthPlcyAcceptAuthChange is not considered anymore for this RADIUS server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServPndRqLimit specifies the limit of the number of pending RADIUS authentication requests for this RADIUS server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServOutTime indicates the accumulated time that the value of the object tmnxSubAuthPlcyRadServOperState has been equal to 'outOfService' since this row was created.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadServOvrldTime indicates the accumulated time that the value of the object tmnxSubAuthPlcyRadServOperState has been equal to 'overloaded' since this row was created.

OBJECT-TYPE

The tmnxSubAuthPlcyStatsTable has an entry for each subscriber authentication policy configured in the system.

OBJECT-TYPE

Each row entry represents a collection of statistics for a subscriber authentication policy in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The value of tmnxSubAuthPlcySuccess indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) were authenticated successfully. Note that not all requests are therefore forwarded to radius. If several requests are sent in a short timeframe, only the first one is sent to radius.

OBJECT-TYPE

The value of tmnxSubAuthPlcyReject indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) were rejected by the authentication. Note that not all requests are therefore forwarded to radius. If several requests are sent in a short timeframe, only the first one is sent to radius.

OBJECT-TYPE

The value of tmnxSubAuthPlcyFallbackSuccess indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) were authenticated successfully by the fallback mechanism.

OBJECT-TYPE

The value of tmnxSubAuthPlcyFallbackReject indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) were rejected by the fallback mechanism.

OBJECT-TYPE

The value of tmnxSubAuthPlcySendFail indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) failed to be sent.

OBJECT-TYPE

The tmnxSubAuthPlcyStatsTable has an entry for each subscriber authentication policy configured in the system.

OBJECT-TYPE

Each row entry represents a collection of statistics for a specific radius server in a subscriber authentication policy in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadSuccess indicates how many authentication requests were accepted by this radius server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadReject indicates how many authentication requests were rejected by this radius server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadTimeout indicates how many times this radius did not reply to an authentication request within the timeout.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadMd5Fail indicates how many times the MD5 verification failed on a msg from this radius server.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadPending indicates how many authentication requests are currently pending.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadSendFail indicates how many authentication requests failed because the packet could not be sent out.

OBJECT-TYPE

The value of tmnxSubAuthPlcyRadOvrldSendFail indicates how many authentication requests failed because the packet could not be sent out while the RADIUS server was in overload.

OBJECT-TYPE

The tmnxSubProfileTable has an entry for each subscriber profile configured in the system.

OBJECT-TYPE

Each row entry represents a subscriber profile configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubProfRowStatus.

OBJECT-TYPE

The value of tmnxSubProfName specifies the name of the subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubProfLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubProfDescription specifies the user provided description of this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfIngQosSchedPolicy specifies the QoS ingress scheduler policy (from TIMETRA-QOS-MIB::tSchedulerPolicyTable) applicable to this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfEgrQosSchedPolicy specifies the QoS egress scheduler policy (from TIMETRA-QOS-MIB::tSchedulerPolicyTable) applicable to this subscriber profile.

OBJECT-TYPE

When the value of the object tmnxSubProfCollectAcctStats is true(1) the agent collects accounting statistics on this subscriber profile.

OBJECT-TYPE

The value of the object tmnxSubProfAccountingPolicyId specifies the policy to use to collect accounting statistics on this subscriber profile. The value zero indicates that the agent should use the default accounting policy, if one exists.

OBJECT-TYPE

The value of the object tmnxSubProfEgrAggRateLimit specifies the maximum total rate of all egress queues for this subscriber. The value '-1' means that there is no limit.

OBJECT-TYPE

The value of tmnxSubProfRadiusAcctPolicy specifies the RADIUS accounting policy (tmnxSubAcctPlcyTable) applicable to this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfDuplRadiusAcctPolicy specifies the RADIUS accounting policy (tmnxSubAcctPlcyTable) to be used for generating duplicate accounting information.

OBJECT-TYPE

The value of tmnxSubProfUseDirectSLAMapAsDef specifies whether the provided SLA profile string is directly mapped to the SLA profile by default. If the value of this object is set to 'true(1)', the SLA profile string is used as the SLA profile name, when no matching tmnxSubProfSLAProfMapSLAString is found.

OBJECT-TYPE

The value of tmnxSubProfFrameBasedAccounting specifies whether to use frame-based accounting when evaluating tmnxSubProfEgrAggRateLimit for subscriber queues. If the value is 'false', the default packet-based accounting method will be used.

OBJECT-TYPE

The value of the object tmnxSubProfIngQosPolId specifies the SAP ingress QOS policy, where the value corresponds to TIMETRA-QOS-MIB::tSapIngressIndex. The value 1 specifies the index of the default SAP ingress qos policy. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of the object tmnxSubProfEgrQosPolId specifies the SAP egress QOS policy, where the value corresponds to TIMETRA-QOS-MIB::tSapEgressIndex. The value 1 specifies the index of the default sap-egress qos policy. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of the object tmnxSubProfHsmdaIngAggRateLimit specifies the maximum total rate of all ingress HSMDA queues for this subscriber. The value '-1' means that there is no limit. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of the object tmnxSubProfHsmdaEgrAggRateLimit specifies the maximum total rate of all egress HSMDA queues for this subscriber. The value '-1' means that there is no limit. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of tmnxSubProfHsmdaIngPackByteOff specifies the value, In bytes, of the adjustment for accounting to make to the size of each HSMDA packet on ingress. The specified value overrides the the value of tSapIngressHsmdaPacketOffset specified in the tSapIngressEntry indexed by tmnxSubProfIngQosPolId. A value of -128 indicates no override. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of tmnxSubProfHsmdaEgrPackByteOff specifies the value, in bytes, of the adjustment for accounting to make to the size of each HSMDA packet on egress. The specified value overrides the the value of tSapEgressHsmdaPacketOffset specified in the tSapEgressEntry indexed by tmnxSubProfEgrQosPolId. A value of -128 indicates no override. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of tmnxSubProfHostTrackingPolicy specifies the IGMP host tracking policy applicable to this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfUseSubscriberMss specifies whether the subscribers will use the default multi-service site of the customer associated with the port on which the subscriber is applied.

OBJECT-TYPE

The value of tmnxSubProfIngPolicerPolicy specifies the ingress policer control policy applicable to this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfEgrPolicerPolicy specifies the egress policer control policy applicable to this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfNatPolicy specifies the NAT (Network Address Translation) policy of this subscriber profile .

OBJECT-TYPE

The value of tmnxSubProfIgmpPolicy specifies the IGMP policy of this subscriber profile .

OBJECT-TYPE

The value of tmnxSubProfEgrAvgFrameSize specifies the average frame size value to be used in the adjustment of the subscriber aggregate rate to account for the per packet variable expansion of the last mile for the specific session used by the subscriber host. The value 0 will disable the adjustments and cause the value of tmnxSubProfEgrEncapOffsetMode to be ignored. The value of tmnxSubProfEgrAvgFrameSize is only used for subscribers serviced by specific HSMDA and ignored otherwise.

OBJECT-TYPE

The value of tmnxSubProfEgrEncapOffsetMode specifies how the fixed packet offset will be derived. This fixed packet offset will be used in the adjustment of the subscriber aggregate rate, to account for the fixed offset and per packet variable expansion of the last mile for the specific session used by the subscriber host. The value 'none (0)' will disable the adjustments. The value 'auto (1)' will derive the fixed packet offset from the encapsulation type value signaled in the Access-loop-encapsulation sub-TLV in the Vendor-Specific PPPoE Tags or DHCP Relay Options [rfc4679].

OBJECT-TYPE

The value of tmnxSubProfEgrEncapOffset specifies the fixed packet offset. This fixed packet offset will be used in the adjustment of the subscriber aggregate rate, to account for the fixed offset and per packet variable expansion of the last mile for the specific session used by the subscriber host. If the value of the object tmnxSubProfEgrEncapOffsetMode is equal to 'none', the offset is ignored. If the value of the object tmnxSubProfEgrEncapOffsetMode is equal to 'auto', the offset is used as a default value for automatic learning.

OBJECT-TYPE

The value of tmnxSubProfSubMcacPolicy specifies the name of the multicast CAC policy. The multicast CAC policy applies the subscriber CAC algorithm if the channel(group) of this subscriber is part of the policy as specified in vRtrIgmpIfMcacPolicyName.

OBJECT-TYPE

The value of the object tmnxSubProfPreference specifies its preference with respect to other subscriber profiles. The number '1' corresponds to the lowest preference. For a given subscriber, it is possible that the current subscriber profile is replaced with another one that has a higher or equal preference; the current subscriber profile will never be replaced with another one that has a lower preference.

OBJECT-TYPE

The value of tmnxSubProfUseDirectFltrMapAsDef specifies whether the provided filter profile string is directly mapped to the filter profile by default. If the value of this object is set to 'true(1)', the filter profile string is used as the filter profile name, when no matching tmnxSPFltrProfMapFltrString is found. This object is obsoleted in 16.0 release.

OBJECT-TYPE

The value of the object tmnxSubProfHsmda2IngQosPolId specifies the identifier of the SAP ingress QOS policy for HSMDA-2 subscribers. The value 1 specifies the index of the default SAP ingress qos policy.

OBJECT-TYPE

The value of the object tmnxSubProfHsmda2EgrQosPolId specifies the identifier of the SAP egress QOS policy for HSMDA-2 subscribers. The value 1 specifies the index of the default sap-egress qos policy.

OBJECT-TYPE

The value of the object tmnxSubProfHsmda2EgrAggRateLimit specifies the maximum total rate of all egress HSMDA-2 queues for this subscriber. The value '-1' means that there is no limit.

OBJECT-TYPE

The value of tmnxSubProfHsmda2EgrQosWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy.

OBJECT-TYPE

The value of tmnxSubProfHsmda2EgrPackByteOff specifies the packet byte offset for addition of policing information for the policer.

OBJECT-TYPE

The value of tmnxSubProfMldPolicy specifies the MLD policy of this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfVolumeStatsType specifies what volume statistics are used for accounting in this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfPimPolicy specifies the PIM (Protocol Independent Multicast) policy associated with this subscriber profile. A non-empty value must correspond to a row in the tmnxSubPimPlcyTable, and implicitly enables PIM for the subscriber hosts associated with this profile.

OBJECT-TYPE

The value of tmnxSubProfUpnpPolicy specifies the UPnP (Universal Plug 'n Play) policy associated with this subscriber profile. A non-empty value must correspond to a row in the TIMETRA-NAT-MIB::tmnxNatUpnpPlcyTable, and implicitly enables UPnP for the subscriber hosts associated with this profile.

OBJECT-TYPE

The value of tmnxSubProfNatPrefixList specifies the Layer-2-Aware NAT (Network Address Translation) prefix list of this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfAcctSessOptimStop specifies whether the stop behavior is optimized for session accounting. When the value is set to 'true', and tmnxSubAcctPlcySessionAcct is set to 'host' or 'interimHost', no interim-update messages will get sent for the related subscriber hosts when the session gets deleted. The optimization will only happen for PPPoE session accounting.

OBJECT-TYPE

The value of tmnxSubProfThirdRadiusAcctPolicy specifies the third RADIUS accounting policy (tmnxSubAcctPlcyTable) applicable to this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfFourtRadiusAcctPolicy specifies the fourth RADIUS accounting policy (tmnxSubAcctPlcyTable) applicable to this subscriber profile.

OBJECT-TYPE

The value of tmnxSubProfFifthRadiusAcctPolicy specifies the fifth RADIUS accounting policy (tmnxSubAcctPlcyTable) applicable to this subscriber profile.

OBJECT-TYPE

The value of the object tmnxSubProfHsSlaMode specifies the SLA profile handling mode for the subscriber if on a HS board.

OBJECT-TYPE

The value of tmnxSubProfEgrHsAggRateLimit specifies the maximum total rate of all egress HS queues for the subscriber. The value '-1' means that there is no limit.

OBJECT-TYPE

The value of tmnxSubProfAccuStatsPolicy specifies the subscriber accumulated statistics policy for subscribers associated with this subscriber profile. A non-empty value must correspond to a conceptual row in the tmnxSubAccuStatsPlcyTable.

OBJECT-TYPE

The value of tmnxSubProfVportHashing specifies whether or not LAG hashing over different forwarding complexes based on VPort ID (int-dest-id) is applied for the subscriber downstream traffic. This setting does not apply to standard LAG ports. For HSMDA/HS lags see tmnxSubProfSecShaperHashing.

OBJECT-TYPE

The value of tmnxSubProfFirewallPolicy specifies the firewall policy for subscribers associated with this subscriber profile. A non-empty value must correspond to a conceptual row in the TIMETRA-NAT-MIB::tmnxNatFwlPlcyTable.

OBJECT-TYPE

The value of tmnxSubProfSecShaperHashing specifies whether or not LAG hashing over different forwarding complexes based on secondary shaper ID is applied for the subscriber downstream traffic. This setting only applies to HSMDA/HS ports. For standard lags see tmnxSubProfVportHashing.

OBJECT-TYPE

The value of tmnxSubProfEgrHsLowBurstMaxClass specifies what classes use the low priority burst threshold and what classes use the high priority burst threshold. The system uses the low priority burst threshold for all classes starting from 1 up to and including the value of tmnxSubProfEgrHsLowBurstMaxClass. The system uses the high priority burst threshold for all classes greater than the value of tmnxSubProfEgrHsLowBurstMaxClass. The value of this object is applicable only if the value of tmnxSubProfHsSlaMode is equal to 'expanded'.

OBJECT-TYPE

The value of tmnxSubProfNatAccessMode specifies the NAT access mode of subscribers associated with this profile.

OBJECT-TYPE

The value of the object tmnxSubProfEgrResvBw specifies the mimimum reserved peak rate of all egress queues for this subscriber. A non zero value of tmnxSubProfEgrResvBw must be lower than a positive value of tmnxSubProfEgrAggRateLimit.

OBJECT-TYPE

The value of the object tmnxSubProfEgrHsResvBw specifies the mimimum reserved peak rate of all egress HS queues for this subscriber. A non zero value of tmnxSubProfEgrHsResvBw must be lower than a positive value of tmnxSubProfEgrHsAggRateLimit.

OBJECT-TYPE

The value of the object tmnxSubProfHsmdaEgrResvBw specifies the mimimum reserved peak rate of all egress HSMDA queues for this subscriber. A non zero value of tmnxSubProfHsmdaEgrResvBw must be lower than a positive value of tmnxSubProfHsmda2EgrAggRateLimit.

OBJECT-TYPE

The tmnxSubProfSchedOverrideTable allows overriding of ingress/egress scheduler rates on a per subscriber profile basis.

OBJECT-TYPE

Each entry of the tmnxSubProfSchedOverrideTable describes ingress/egress scheduler rates which are overridden for the subscriber profile indicated by tmnxSubProfName. Rows can be created and deleted by the operator (tmnxSubProfSchedOvrRowStatus). Rows can only be created for existing schedulers defined in TIMETRA-QOS-MIB::tVirtualSchedulerTable.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrDirection indicates whether this row specifies ingress or egress scheduler override parameters.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrPIR specifies the PIR rate in kbps allowed for this scheduler. This object is mandatory at creation time. This object is obsoleted in 11.0 Release. It is replaced by tmnxSubProfSchedOvrPIRHi and tmnxSubProfSchedOvrPIRLo.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrCIR specifies the CIR rate in kbps allowed for this scheduler. This object is obsoleted in 11.0 Release. It is replaced by tmnxSubProfSchedOvrCIRHi and tmnxSubProfSchedOvrCIRLo.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (tmnxSubProfSchedOvrCIR) loses its meaning.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrPIRHi specifies upper 32 bits of the pir-rate allowed for this scheduler. This value should always be set along with tmnxSubProfSchedOvrPIRLo, otherwise an 'inconsistentValue' error is returned. This object is mandatory at creation time. When the value of tmnxSubProfSchedOvrPIRHi along with the value of tmnxSubProfSchedOvrPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrPIRLo specifies lower 32 bits of the pir-rate allowed for this scheduler. This value should always be set along with tmnxSubProfSchedOvrPIRHi, otherwise an 'inconsistentValue' error is returned. This object is mandatory at creation time. When the value of tmnxSubProfSchedOvrPIRHi along with the value of tmnxSubProfSchedOvrPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrCIRHi specifies upper 32 bits of the cir-rate allowed for this scheduler. This value should always be set along with tmnxSubProfSchedOvrCIRLo, otherwise an 'inconsistentValue' error is returned. This object is mandatory at creation time. When the value of tmnxSubProfSchedOvrCIRHi along with the value of tmnxSubProfSchedOvrCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate.

OBJECT-TYPE

The value of tmnxSubProfSchedOvrCIRLo specifies lower 32 bits of the cir-rate allowed for this scheduler. This value should always be set along with tmnxSubProfSchedOvrPIRHi, otherwise an 'inconsistentValue' error is returned. This object is mandatory at creation time. When the value of tmnxSubProfSchedOvrCIRHi along with the value of tmnxSubProfSchedOvrCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate.

OBJECT-TYPE

The tmnxSubProfSLAProfileMapTable has an entry for each SLA profile string to SLA profile name mapping defined under a subscriber profile configured in the system.

OBJECT-TYPE

Each row entry represents an SLA profile string to SLA profile name mapping defined under a subscriber profile configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubProfSLAProfMapRowStatus.

OBJECT-TYPE

The value of tmnxSubProfSLAProfMapSLAString specifies the SLA profile string for this row.

OBJECT-TYPE

The value of tmnxSubProfSLAProfMapRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubProfSLAProfMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubProfSLAProfMapSLAProfile specifies the SLA profile name corresponding to this row.

OBJECT-TYPE

The tmnxSLAProfileTable has an entry for each SLA (Service Level Agreement) profile defined in the system.

OBJECT-TYPE

Each row entry represents an SLA profile configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSLAProfRowStatus.

OBJECT-TYPE

The value of tmnxSLAProfName specifies the name of the SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSLAProfLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSLAProfDescription specifies the user provided description of this SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfHostLimit specifies the maximum number of hosts using this SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfRemoveOldest specifies whether the oldest subscriber host should be removed when the tmnxSLAProfHostLimit is hit.

OBJECT-TYPE

The value of tmnxSLAProfIngQosPolId specifies the ingress QoS policy applicable to this SLA profile. The corresponding policy is defined in the TIMETRA-QOS-MIB::tSapIngressTable. The values above 65535 are reserved.

OBJECT-TYPE

The value of tmnxSLAProfIngSharedQPolicy specifies the ingress shared queue policy (found in TIMETRA-QOS-MIB::tSharedQueuePolicyTable) applicable to this SLA profile. When the value of this object is an empty string it means that the SLA profile will use individual ingress QoS queues, instead of the shared ones.

OBJECT-TYPE

The value of tmnxSLAProfIngUseMpointShared specifies whether the multipoint-shared queues of the shared queue policy specified by tmnxSLAProfIngSharedQPolicy are used. If no shared queue policy is specified, this object has no meaning.

OBJECT-TYPE

The value of tmnxSLAProfIngIPFilterId specifies the ingress IP filter (from TIMETRA-FILTER-MIB::tIPFilterTable) applicable to this SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfEgrQosPolId specifies the egress QoS policy applicable to this SLA profile. The corresponding policy is defined in the TIMETRA-QOS-MIB::tSapEgressTable. The values above 65535 are reserved.

OBJECT-TYPE

The value of tmnxSLAProfEgrIPFilterId specifies the egress IP filter (from TIMETRA-FILTER-MIB::tIPFilterTable) applicable to this SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfCreditControlPlcy specifies the Credit Control Policy used by this SLA profile. The value specified must be defined in tmnxSubApCreditControlPlcyTable

OBJECT-TYPE

The value of tmnxSLAProfReportIngRateType specifies what rate will be reported in the L2TP RX-connect-speed attribute (AVP 38) when creating an L2TP LAC session.

OBJECT-TYPE

The value of tmnxSLAProfReportIngRateSched specifies the scheduler to take the rate from. This object can only be set to a non-empty string if tmnxSLAProfReportIngRateType is set to 'namedScheduler'.

OBJECT-TYPE

The value of tmnxSLAProfReportEgrRateType specifies what rate will be reported in the L2TP TX-connect-speed attribute (AVP 24) when creating an L2TP LAC session.

OBJECT-TYPE

The value of tmnxSLAProfReportEgrRateSched specifies the scheduler to take the rate from. This object can only be set to a non-empty string if tmnxSLAProfReportEgrRateType is set to 'namedScheduler'.

OBJECT-TYPE

The value of tmnxSLAProfEgrQosMarkingFromSap specifies which egress QoS marking rules are applied. If set to 'false', the egress Qos marking is defined in the sap-egress policy defined at SLA-profile level. If set to 'true', QoS marking rules defined in the sap-egress policy associated with the given SAP are applied.

OBJECT-TYPE

The value of tmnxSLAProfIngIPv6FilterId specifies the ingress IPv6 filter (from TIMETRA-FILTER-MIB::tIPv6FilterTable) applicable to this SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfEgrIPv6FilterId specifies the egress IPv6 filter (from TIMETRA-FILTER-MIB::tIPv6FilterTable) applicable to this SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfEgrSchedulerType specifies the type of scheduling for queued traffic. If set to 'portScheduler (1)' the subscriber host queues will be parented to the port scheduler. If set to 'vportScheduler (2)' the subscriber host queues will be parented to a virtual port, which will be derived by performing a lookup with the subscriber host's intermediate destination id and organization string in the TIMETRA-PORT-MIB::tPortEgrVPortHostMatchTable.

OBJECT-TYPE

The value of tmnxSLAProfOTHttpRdrIpv4FltrId specifies the one-time HTTP redirection IP filter (from TIMETRA-FILTER-MIB::tIPFilterTable) applicable to this SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfEgrUseIngL2tpDscp specifies if the DSCP value found in the L2TP header of ingress traffic of PPP subscribers must be used to get the Forwarding Class for egress reclassification.

OBJECT-TYPE

The value of tmnxSLAProfEgrQosSchedPolicy specifies the QoS egress scheduler policy (from TIMETRA-QOS-MIB::tSchedulerPolicyTable) applicable to this SLA profile.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV4 specifies the maximum number of IPv4 hosts overall.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV4Ppp specifies the maximum number of IPv4 PPP hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV4Dhcp specifies the maximum number of IPv4 DHCP hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV4Arp specifies the maximum number of IPv4 ARP hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6 specifies the maximum number of IPv6 hosts overall.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6Wan specifies the maximum number of IPv6-WAN hosts overall.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6WanPppSlaac specifies the maximum number of IPv6-WAN PPP SLAAC hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6WanPppDhcp specifies the maximum number of IPv6-WAN PPP DHCP hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6WanIpoeSlaac specifies the maximum number of IPv6-WAN IPOE SLAAC hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6WanIpoeDhcp specifies the maximum number of IPv6-WAN IPOE DHCP hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6Pd specifies the maximum number of IPv6-PD hosts overall.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6PdPppDhcp specifies the maximum number of IPv6-PD PPP DHCP hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimV6PdIpoeDhcp specifies the maximum number of IPv6-PD IPOE DHCP hosts.

OBJECT-TYPE

The value of tmnxSLAProfHostLimLac specifies the maximum number of L2TP LAC hosts.

OBJECT-TYPE

The value of the object tmnxSLAProfEgrHsAggRateLimit specifies the maximum total rate of all egress HS queues for a subscriber having sla-mode 'expanded'. For other sla-modes, this value is ignored. The value '-1' means that there is no limit.

OBJECT-TYPE

The value of tmnxSLAProfReportIngRatePolicer specifies the ingress policer to take the rate from. This object can only be set to a valid policer if tmnxSLAProfReportIngRateType is set to 'policerId'.

OBJECT-TYPE

The value of tmnxSLAProfReportEgrRatePolicer specifies the egress policer to take the rate from. This object can only be set to a valid policer if tmnxSLAProfReportEgrRateType is set to 'policerId'.

OBJECT-TYPE

The value of tmnxSLAProfEgrHsQueueStatMode specifies the mode of statistics collected for all the HS queues. A value of 'v4V6(0)' indicates separate counters are collected for IPv4 and IPv6 instead of the normal queue statistics. The value of tmnxSLAProfEgrHsQueueStatMode is only used by HS IOMs, it is ignored on other IOMs. While the value of tmnxSLAProfEgrHsQueueStatMode is different from 'noOverride', it is not allowed to change the value of tmnxSLAProfEgrQosPolId. While there are instances of this SLA profile in use, it is not allowed to change the value of tmnxSLAProfEgrHsQueueStatMode.

OBJECT-TYPE

The value of tmnxSLAProfDefInstanceSharing specifies the way hosts are grouped to share an SLA Profile instance, in absence of a group identifier specified by an AAA server.

OBJECT-TYPE

The tmnxSLAIngQueueOverrideTable allows overriding of ingress QoS policy queue parameters on a per SLA profile basis.

OBJECT-TYPE

Each entry of the tmnxSLAIngQueueOverrideTable describes queue parameters which override the corresponding template queue parameters from the specified ingress QoS policy. Rows can be created and deleted by the operator (tmnxSLAIngQueueOvrRowStatus). Rows can only be created for queues that exist in table TIMETRA-QOS-MIB::tSapIngressQueueTable.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrPIR specifies the PIR rate in kbps allowed for this queue.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrCIR specifies the CIR rate in kbps allowed for this queue.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrMBS specifies the maximum amount of buffer space (in kbytes) allowed for the queue.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrCBS specifies the amount of reserved buffer space (in kbytes) for the queue.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrMBSBytes specifies the maximum amount of buffer space (bytes) allowed for the queue.

OBJECT-TYPE

The value of tmnxSLAIngQueueOvrStatMode specifies the mode of statistics collected for the queue. A value of 'v4V6(0)' indicates separate counters are collected for IPv4 and IPv6 instead of the normal queue statistics.

OBJECT-TYPE

The tmnxSLAEgrQueueOverrideTable allows overriding of egress QoS policy queue parameters on a per SLA profile basis.

OBJECT-TYPE

Each entry of the tmnxSLAEgrQueueOverrideEntry describes queue parameters which override the corresponding template queue parameters from the specified egress QoS policy. Rows can be created and deleted by the operator (tmnxSLAEgrQueueOvrRowStatus). Rows can only be created for queues that exist in table TIMETRA-QOS-MIB::tSapEgressQueueTable.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrPIR specifies the PIR rate in kbps allowed for this queue.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrCIR specifies the CIR rate in kbps allowed for this queue.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrMBS specifies the maximum amount of buffer space (in kbytes) allowed for the queue.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrCBS specifies the amount of reserved buffer space (in kbytes) for the queue.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrAvgOverhead specifies the encapsulation overhead, in centipercent, used to translate packet-based rate to frame-based rate and vice versa. The value '-2' indicates that the value is not overridden.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrMBSBytes specifies the maximum amount of buffer space (in bytes) allowed for the queue.

OBJECT-TYPE

The value of tmnxSLAEgrQueueOvrStatMode specifies the mode of statistics collected for the queue. A value of 'v4V6(0)' indicates separate counters are collected for IPv4 and IPv6 instead of the normal queue statistics.

OBJECT-TYPE

The value of the object tmnxSLAEgrQueueOvrHsWrrWeight specifies the SLA profile instance WRR weight override for the HS queue. The value '-2' means that there is no override, i.e. the WRR weight is taken from the sap-egress policy.

OBJECT-TYPE

The value of the object tmnxSLAEgrQueueOvrHsClassWeight specifies the SLA profile instance class weight override for the HS class. The value '-2' means that there is no override, i.e. the class weight is taken from the sap-egress policy.

OBJECT-TYPE

The value of the object tmnxSLAEgrQueueOvrHsWredQuePlcy specifies name of the slope policy override to be applied for the HS queue of this SLA profile instance. The value of this object must refer to an existing row in tSlopePolicyTable.

OBJECT-TYPE

The tmnxSubExplicitMapTable has an entry for each subscriber identification string mapping configured in the system.

OBJECT-TYPE

Each row entry represents a subscriber identification string mapping configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubExplicitMapRowStatus.

OBJECT-TYPE

The value of tmnxSubExplicitMapSubIdent specifies the subscriber identification string for this row.

OBJECT-TYPE

The value of tmnxSubExplicitMapRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubExplicitMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubExplicitMapSubProfile specifies the subscriber profile corresponding to this row.

OBJECT-TYPE

The value of tmnxSubExplicitMapSLAProfile specifies the SLA profile corresponding to this row.

OBJECT-TYPE

The value of tmnxSubExplicitMapAlias specifies an alias for the subscriber identification string.

OBJECT-TYPE

The value of tmnxSubExplicitMapAppProfile specifies the application profile corresponding to this row. The application profile is configured in TIMETRA-BSX-NG-MIB.mib::tmnxBsxAppProfTable.

OBJECT-TYPE

The tmnxSubIdentPolicyTable has an entry for each subscriber identification policy configured in the system.

OBJECT-TYPE

Each row entry represents a subscriber identification policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubIPolRowStatus.

OBJECT-TYPE

The value of tmnxSubIPolName specifies the name of the subscriber identification policy.

OBJECT-TYPE

The value of tmnxSubIPolRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubIPolLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubIPolDescription specifies the user provided description of this subscriber identification policy.

OBJECT-TYPE

The value of tmnxSubIPolScript1URL specifies the URL of the primary identification script.

OBJECT-TYPE

The value of tmnxSubIPolScript1AdminState specifies the administrative state of the primary identification script.

OBJECT-TYPE

The value of tmnxSubIPolScript1OperState indicates the operational state of the primary identification script.

OBJECT-TYPE

The value of tmnxSubIPolScript2URL specifies the URL of the secondary identification script.

OBJECT-TYPE

The value of tmnxSubIPolScript2AdminState specifies the administrative state of the secondary identification script.

OBJECT-TYPE

The value of tmnxSubIPolScript2OperState indicates the operational state of the secondary identification script.

OBJECT-TYPE

The value of tmnxSubIPolScript3URL specifies the URL of the tertiary identification script.

OBJECT-TYPE

The value of tmnxSubIPolScript3AdminState specifies the administrative state of the tertiary identification script.

OBJECT-TYPE

The value of tmnxSubIPolScript3OperState indicates the operational state of the tertiary identification script.

OBJECT-TYPE

The value of tmnxSubIPolUseDirectSubMapAsDef specifies whether the provided subscriber profile string is directly mapped to the subscriber profile name by default. If the value of this object is set to 'true(1)', the subscriber profile string is used as the subscriber profile name, when no matching tmnxSubIPolSubProfMapSubString is found.

OBJECT-TYPE

The value of tmnxSubIPolUseDirectSLAMapAsDef specifies whether the provided SLA profile string is directly mapped to the SLA profile by default. If the value of this object is set to 'true(1)', the SLA profile string is used as the SLA profile name, when no matching tmnxSubIPolSLAProfMapSLAString is found.

OBJECT-TYPE

The value of tmnxSubIPolUseDirectAppMapAsDef specifies whether the provided application profile string is directly mapped to the application profile by default. If the value of this object is set to 'true(1)', the application profile string is used as the application profile name, when no matching tmnxSubIPolAppProfMapAppString is found.

OBJECT-TYPE

The value of tmnxSubIPolStringsFromOption specifies the option number in the DHCP acknowledgement packet where to take the identification strings from. If the value of this object is set to 0, the identification strings are derived using the identification scripts. If the value is set to non-zero, the strings are taken directly from the specified option without using the identification scripts.

OBJECT-TYPE

The value of tmnxSubIPolUseDirectFltrMapAsDef specifies whether the provided filter profile string is directly mapped to the filter profile by default. If the value of this object is set to 'true(1)', the filter profile string is used as the filter profile name, when no matching tmnxSubIPolFltrProfMapFltrString is found.

OBJECT-TYPE

The value of tmnxSubIPolRejectUnknownStrings specifies if unknown subscriber strings are explicitly rejected by the system. If the value of tmnxSubIPolRejectUnknownStrings is equal to 'false', the system silently recovers using a known string that may be different from the current string used by the subscriber. If the value of tmnxSubIPolRejectUnknownStrings is equal to 'true', unknown strings are refused with an error message, and the subscriber strings are not modified.

OBJECT-TYPE

The tmnxSubIPolSubProfileMapTable has an entry for each subscriber profile string to subscriber profile name mapping defined under a subscriber identification policy configured in the system.

OBJECT-TYPE

Each row entry represents a subscriber profile string to subscriber profile name mapping defined under a subscriber identification policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubIPolSubProfMapRowStatus.

OBJECT-TYPE

The value of tmnxSubIPolSubProfMapSubString specifies the subscriber profile string for this row.

OBJECT-TYPE

The value of tmnxSubIPolSubProfMapRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubIPolSubProfMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubIPolSubProfMapSubProfile specifies the subscriber profile name corresponding to this row.

OBJECT-TYPE

The tmnxSubIPolSLAProfileMapTable has an entry for each SLA profile string to SLA profile name mapping defined under a subscriber identification policy configured in the system.

OBJECT-TYPE

Each row entry represents an SLA profile string to SLA profile name mapping defined under a subscriber identification policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubIPolSLAProfMapRowStatus.

OBJECT-TYPE

The value of tmnxSubIPolSLAProfMapSLAString specifies the SLA profile string for this row.

OBJECT-TYPE

The value of tmnxSubIPolSLAProfMapRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubIPolSLAProfMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubIPolSLAProfMapSLAProfile specifies the SLA profile name corresponding to this row.

OBJECT-TYPE

The tmnxSubscriberInfoTable has an entry for each subscriber found in the system.

OBJECT-TYPE

Each row entry contains information about a particular subscriber available in the system.

OBJECT-TYPE

The value of tmnxSubInfoSubIdent specifies the subscriber identification of this subscriber.

OBJECT-TYPE

The value of tmnxSubInfoSubProfile indicates the subscriber profile (found in tmnxSubProfileTable) used by this subscriber.

OBJECT-TYPE

The value of tmnxSubInfoSubAncpString indicates the ancp string corresponding to this subscriber id.

OBJECT-TYPE

The value of tmnxSubInfoNumSubProfileChanges indicates the number of times tmnxSubInfoSubProfile has changed. A high value of this object could indicate a problem with the subscriber identification policy (e.g. when two or more lease states belonging to the same subscriber evaluate to a different subscriber profile name).

OBJECT-TYPE

The value of tmnxSubInfoIntermediateDestId indicates the intermediate destination identifier corresponding to this subscriber id.

OBJECT-TYPE

The value of tmnxSubInfoAppProfile indicates the application profile used by this subscriber. Application profiles are in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable

OBJECT-TYPE

The value of tmnxSubInfoEgrSecShaper indicates the interpretation of the tmnxSubInfoIntermediateDestId object. A value 'unused', indicates that this subscriber is on a non-HSMDA MDA and the value of tmnxSubInfoIntermediateDestId is unused. A value of 'default' indicates that the default secondary shaper will be used for the subscriber. A value of 'intDestId' indicates that the value of tmnxSubInfoIntermediateDestId indicates the secondary shaper that will be used for this subscriber.

OBJECT-TYPE

The value of tmnxSubInfoMssCustId indicates the customer-id of the customer in which the multi-service-site specified in tmnxSubInfoMssName is defined.

OBJECT-TYPE

The value of tmnxSubInfoMssName indicates the name of the multi-service-site used by this subscriber.

OBJECT-TYPE

The value of tmnxSubInfoRadEgrAggRateLimit indicates the egress aggregate rate limit override received by RADIUS.

OBJECT-TYPE

The value of tmnxSubInfoEgrAggRateLimit indicates the intended egress aggregate rate limit, regardless of its origin.

OBJECT-TYPE

The value of tmnxSubInfoQos indicates the Quality of Service model associated with this subscriber. It is determined by the MDA (Media Dependent Adapter) and/or IOM (I/O Module of the subscriber hosts.

OBJECT-TYPE

If different from 0, the value of tmnxSubInfoIngQosPolIdOvr indicates the ID of the overriding ingress Qos policy. The value of tmnxSubInfoIngQosPolIdOvr is only used for HSMDA-2 subscribers.

OBJECT-TYPE

The value tmnxSubInfoShortId specifies the short subscriber id of the subscriber, see tmnxSubShortTable.

OBJECT-TYPE

The value tmnxSubInfoEgrAggRateLimitLow indicates if the system has reset the requested egress aggregate rate limit to its reserved minimum value.

OBJECT-TYPE

The tmnxSubHostInfoTable has an entry for each subscriber host found in the system.

OBJECT-TYPE

Each row entry contains information about a particular subscriber host available in the system.

OBJECT-TYPE

The value of tmnxSubHostInfoIpAddressType specifies the type of address stored in tmnxSubHostInfoIpAddress.

OBJECT-TYPE

The value of tmnxSubHostInfoIpAddress specifies the IP address of this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoMacAddress specifies the MAC address of this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoSubIdent indicates the subscriber identification applicable for this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object may contain an empty string.

OBJECT-TYPE

The value of tmnxSubHostInfoSubProfile indicates the subscriber profile (found in tmnxSubProfileTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

OBJECT-TYPE

The value of tmnxSubHostInfoSLAProfile indicates the SLA profile (found in tmnxSLAProfileTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

OBJECT-TYPE

The value of tmnxSubHostInfoOrigin indicates the origin of this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoRetailerSvcId indicates the service ID of the retailer VPRN service to which this subscriber host belongs. When this object is non zero, the subscriber host belongs to a retailer VPRN.

OBJECT-TYPE

The value of tmnxSubHostInfoRetailerIf indicates the interface index of the retailer VPRN interface to which this subscriber host belongs. When this object is non zero, the subscriber host belongs to a retailer VPRN.

OBJECT-TYPE

The value of tmnxSubHostInfoFwdingState indicates the forwarding state of this subscriber host. When the value is 'outOfService', host traffic is not forwarded. When it is 'inService', host traffic is forwarded.

OBJECT-TYPE

The value of tmnxSubHostInfoAppProfile indicates the application profile (found in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

OBJECT-TYPE

The tmnxSubIngQosSchedStatsTable contains ingress QoS scheduler statistics about subscribers. In the descriptions below 'Pchip' refers to the Nokia SROS series Packet Processing chip, while 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip.

OBJECT-TYPE

Each row entry contains ingress statistics about a particular subscriber QoS scheduler.

OBJECT-TYPE

The value of tmnxSubIngQosSchedStatsName specifies the ingress QoS scheduler of this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQosSchedStatsFwdPkts indicates the number of forwarded packets, as determined by the subscriber ingress scheduler policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSubIngQosSchedStatsFwdOctets indicates the number of forwarded octets, as determined by the subscriber ingress scheduler policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The tmnxSubEgrQosSchedStatsTable contains egress QoS scheduler statistics about subscribers. In the descriptions below 'Pchip' refers to the Nokia SROS series Packet Processing chip, while 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip.

OBJECT-TYPE

Each row entry contains egress statistics about a particular subscriber QoS scheduler.

OBJECT-TYPE

The value of tmnxSubEgrQosSchedStatsName specifies the egress QoS scheduler of this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQosSchedStatsFwdPkts indicates the number of forwarded packets by the egress Qchip, as determined by the subscriber egress scheduler policy.

OBJECT-TYPE

The value of tmnxSubEgrQosSchedStatsFwdOctets indicates the number of forwarded octets by the egress Qchip, as determined by the subscriber egress scheduler policy.

OBJECT-TYPE

The tmnxSLAProfInstSubHostTable has an entry for each subscriber host found in the system, sorted by SLA profile instance.

OBJECT-TYPE

Each row entry indicates a particular subscriber host available in the system.

OBJECT-TYPE

The value of tmnxSPISubHostIpAddressType specifies the type of address stored in tmnxSPISubHostIpAddress.

OBJECT-TYPE

The value of tmnxSPISubHostIpAddress specifies the IP address of this subscriber host.

OBJECT-TYPE

The value of tmnxSPISubHostMacAddress indicates the MAC address of this subscriber host.

OBJECT-TYPE

The value of tmnxSPISubHostOrigin indicates the origin of this subscriber host.

OBJECT-TYPE

The tmnxSLAProfInstStatsTable contains basic statistics about SLA profile instances. In the descriptions below 'Pchip' refers to the Nokia SROS series Packet Processing chip, while 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip. Using this table is discouraged. Please use the tmnxSpiStatsTable instead.

OBJECT-TYPE

Each row entry contains basic statistics about a particular SLA profile instance.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffHiPrioPkts indicates the number of high priority packets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffHiPrioOctets indicates the number of high priority octets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffLoPrioPkts indicates the number of low priority packets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffLoPrioOctets indicates the number of low priority octets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffUncolPkts indicates the number of uncolored packets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffUncolOctets indicates the number of uncolored octets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipDropHiPrioPkts indicates the number of high priority packets as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipDropHiPrioOctets indicates the number of high priority octets as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipDropLoPrioPkts indicates the number of low priority packets as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipDropLoPrioOctets indicates the number of low priority octets as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipFwdInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipFwdOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipDropInProfPkts indicates the number of in-profile packets dropped by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipDropInProfOctets indicates the number of in-profile octets dropped by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipDropOutProfPkts indicates the number of out-of-profile packets dropped by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipDropOutProfOctets indicates the number of out-of-profile octets dropped by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipFwdInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipFwdOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffV4Pkts indicates the number of V4 packets offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffV4Octets indicates the number of V4 octets offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffV6Pkts indicates the number of V6 packets offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngPchipOffV6Octets indicates the number of V6 octets offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipDropV4Pkts indicates the number of V4 packets dropped by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipDropV4Octets indicates the number of V4 octets dropped by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipDropV6Pkts indicates the number of V6 packets dropped by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipDropV6Octets indicates the number of V6 octets dropped by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipFwdV4Pkts indicates the number of V4 packets forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipFwdV4Octets indicates the number of V4 octets forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipFwdV6Pkts indicates the number of V6 packets forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsIngQchipFwdV6Octets indicates the number of V6 octets forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipDropV4Pkts indicates the number of V4 packets dropped by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipDropV4Octets indicates the number of V4 octets dropped by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipDropV6Pkts indicates the number of V6 packets dropped by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipDropV6Octets indicates the number of V6 octets dropped by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipFwdV4Pkts indicates the number of V4 packets forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipFwdV4Octets indicates the number of V4 octets forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipFwdV6Pkts indicates the number of V6 packets forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIStatsEgrQchipFwdV6Octets indicates the number of V6 octets forwarded by the egress Qchip.

OBJECT-TYPE

The tmnxSLAProfInstIngQStatsTable contains ingress QoS queue statistics about SLA profile instances. In the descriptions below 'Pchip' refers to the Nokia SROS series Packet Processing chip, while 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip. Using this table is discouraged. Please use the tmnxSpiIngQStatsTable instead.

OBJECT-TYPE

Each row entry contains ingress statistics about a particular SLA profile instance QoS queue.

OBJECT-TYPE

The value of tmnxSPIIngQStatsQueueId specifies the index of the ingress QoS queue of this SLA profile instance.

OBJECT-TYPE

The value of tmnxSPIIngQStatsOffHiPrioPkts indicates the number of high priority packets, as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsDropHiPrioPkts indicates the number of high priority packets, as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsOffLoPrioPkts indicates the number of low priority packets, as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsDropLoPrioPkts indicates the number of low priority packets, as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsOffHiPrioOctets indicates the number of high priority octets, as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsDropHiPrioOctets indicates the number of high priority octets, as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsOffLoPrioOctets indicates the number of low priority octets, as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsDropLoPrioOctets indicates the number of low priority octets, as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsOffUncolPkts indicates the number of uncolored packets offered to the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsOffUncolOctets indicates the number of uncolored octets offered to the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsFwdInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatsFwdOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.

OBJECT-TYPE

The value of tmnxSPIIngQStatModeFormat indicates the stat mode format of this ingress QoS queue of this SLA profile instance.

OBJECT-TYPE

The tmnxSLAProfInstEgrQStatsTable contains egress QoS queue statistics about SLA profile instances. In the descriptions below 'Pchip' refers to the Nokia SROS series Packet Processing chip, while 'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip. Using this table is discouraged. Please use the tmnxSpiEgrQStatsTable instead.

OBJECT-TYPE

Each row entry contains egress statistics about a particular SLA profile instance QoS queue.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsQueueId specifies the index of the egress QoS queue of this SLA profile instance.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsDropInProfPkts indicates the number of in-profile packets discarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsDropOutProfPkts indicates the number of out-of-profile packets discarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsFwdInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsDropInProfOctets indicates the number of in-profile octets discarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsFwdOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIEgrQStatsDropOutProfOctets indicates the number of out-of-profile octets discarded by the egress Qchip.

OBJECT-TYPE

The value of tmnxSPIEgrQStatModeFormat indicates the stat mode format of this egress QoS queue of this SLA profile instance.

OBJECT-TYPE

The tmnxSubscriberInfoModifyTable augments the tmnxSubscriberInfoTable. The table allows the operator to modify subscriber attributes including the subscriber identification name.

OBJECT-TYPE

Each row entry contains parameters that allow to modify a subscriber attribute

OBJECT-TYPE

The value of tmnxSubInfoModifySubIdent allows to specify a new name for this subscriber. When a SET of this object is done, with a non empty string, the system will attempt to rename the subscriber referred to by this row. If this action is successful, this row will be automatically removed by the system, and a new row will be created for the renamed subscriber. GETs and GETNEXTs on this variable return an empty string.

OBJECT-TYPE

The tmnxSubAcctPlcyTable allows configuration of RADIUS based accounting policies.

OBJECT-TYPE

tmnxSubAcctPlcyEntry is an entry (conceptual row) in the tmnxSubAcctPlcyTable. Each entry represents the configuration for a RADIUS accounting policy. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubAcctPlcyRowStatus. Entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tmnxSubAcctPlcyName specifies a specific subscriber RADIUS based accounting policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRowStatus controls the creation and deletion of rows in the table. An attempt to delete a row that is referred to will fail with an inconsistentValue error.

OBJECT-TYPE

The value of tmnxSubAcctPlcyLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcyDescription specifies the user provided description of this subscriber RADIUS based accounting policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcySessionIdFormat specifies the format for the acct-session-id attribute used in RADIUS accounting requests.

OBJECT-TYPE

The value of tmnxSubAcctPlcyInclAttributes specifies what RADIUS attributes the system should include into RADIUS accounting messages.

OBJECT-TYPE

The value of tmnxSubAcctPlcyUpdateIvl specifies the interval at which accounting data of subscriber hosts will be updated. If set to 0, no intermediate updates will be sent.

OBJECT-TYPE

The value of tmnxSubAcctPlcyServVRtrID specifies the virtual router instance applicable for the set of configured RADIUS servers (tmnxSubAcctPlcyRadServTable). The value of this object cannot be changed once an RADIUS server is configured for this policy. When the value is '0', both base and management router instances are matched.

OBJECT-TYPE

The value of tmnxSubAcctPlcyServRetry specifies the number of RADIUS requests towards the same RADIUS server.

OBJECT-TYPE

The value of tmnxSubAcctPlcyServSrcAddrTp specifies the type of address stored in tmnxSubAcctPlcyServSrcAddr.

OBJECT-TYPE

The value of tmnxSubAcctPlcyServSrcAddr specifies the source address of a RADIUS packet for subscriber accounting. It must be a valid unicast address (otherwise a wrongValue error is returned). If this object is configured with the address of the router interface (ref TIMETRA-VRTR-MIB::vRiaIpAddress) the RADIUS client uses it while making a request to the server. If the address is not configured or is not the address of one of the interfaces, the source address is based on the address of the RADIUS server. If the server address is in-band, the client uses the system ip address. If it is out-of-band, the source address is the address of the management interface (the addresses can be found in TIMETRA-VRTR-MIB::vRiaIpAddress).

OBJECT-TYPE

The value of tmnxSubAcctPlcyServTimeout specifies, in seconds, the timeout between retries towards the same RADIUS server.

OBJECT-TYPE

The value of tmnxSubAcctPlcyServAlgorithm specifies the algorithm used to select a RADIUS server from the list of configured servers (tmnxSubAcctPlcyRadServTable).

OBJECT-TYPE

The value of tmnxSubAcctPlcyUseStdAcctAttrib specifies whether or not the standard accounting attributes are used. If set to 'true (1)', the standard accounting attributes are used for accounting information, instead of the vendor specific attributes. This field has been deprecated in the 12.0 release, and is replaced by the 'perQueueStats(31)' and 'stdAcctAttributes(32)' bit-values in tmnxSubAcctPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAcctPlcyNasPortPfixType specifies what type of prefix will be added to the NAS-Port-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAcctPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAcctPlcyNasPortPfixString specifies the user configurable string to be added as prefix to the NAS-Port attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAcctPlcyInclAttributes and tmnxSubAcctPlcyNasPortPfixType is set to 'userString'.

OBJECT-TYPE

The value of tmnxSubAcctPlcyNasPortSfixType specifies what type of suffix will be added to the NAS-Port-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAcctPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAcctPlcyNasPortTypeType specifies what kind of value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxSubAcctPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAcctPlcyNasPortTypeValue specifies what value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxSubAcctPlcyInclAttributes and the value of the object tmnxSubAcctPlcyNasPortTypeType is equal to 'config'.

OBJECT-TYPE

The value of tmnxSubAcctPlcyHostAccounting specifies whether accounting messages are sent for the host.

OBJECT-TYPE

The value of tmnxSubAcctPlcyClngStationIdType specifies what string will be put in the RADIUS Calling-Station-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'callingStationId' bit is set in tmnxSubAcctPlcyInclAttributes.

OBJECT-TYPE

The value of tmnxSubAcctPlcyNasPortBitspec specifies what number will be put in the RADIUS NAS-Port attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPort' bit is set in tmnxSubAcctPlcyInclAttributes. <origin> ::= 'o' | 'i' | 's' | 'm' | 'p' | 'v' | 'c' 'c' - ATM VCI (Virtual Channel Identifier) 'i' - inner VLAN ID 'm' - MDA number 'o' - outer VLAN ID 'p' - port number 's' - slot number 'v' - ATM VPI (Virtual Path Identifier) Maximum 32 bits can be specified. If less than 32 bits are specified, the least significant bits are used and the omitted higher bits are set to zero. Example: *12o*12i*2s01 means 'the 12 least significant bits of the outer VLAN ID, followed by the 12 least significant bits of the inner VLAN ID, followed by the two least significant bits of the slot number, followed by a zero bit and a one bit', stored in network order in the least significant bits: 0000ooooooooooooiiiiiiiiiiiiss01.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRequestScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the outgoing Accounting-Request messages.

OBJECT-TYPE

The value of tmnxSubAcctPlcyQueueInstAcct specifies whether accounting messages are sent for the queue-instance. The queue-instance is the subscriber on High Scale MDA (HSMDA), or the SLA profile instance otherwise.

OBJECT-TYPE

The value of tmnxSubAcctPlcySessionAcct specifies whether accounting messages are sent for the session.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadiusServerPlcy specifies the RADIUS server policy as defined in TIMETRA-RADIUS-MIB::tmnxRadSrvPlcyTable to be applied in this RADIUS accounting policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcyUpdateIvlJitter specifies the amount of jitter to be applied on the update interval which is configured in tmnxSubAcctPlcyUpdateIvl and can be overruled by RADIUS. A value between 0..3600 specifies the amount of jitter in seconds. The (default) value -10 corresponds to a jitter value of 10% of the update interval. The operational value used by the system will never be bigger then 10% of the update interval.

OBJECT-TYPE

The value of the object tmnxSubAcctPlcyAcctTunnConn specifies what string is to be sent in the accounting message. <origin> ::= 'n' | 's' | 'S' | 't' | 'T' | 'c' | 'C' 'n' - Call Serial Number 's' - Local Session Id 'S' - Remote Session Id 't' - Local Tunnel Id 'T' - Remote Tunnel Id 'c' - Local Connection Id 'C' - Remote Connection Id An empty string is not allowed. Example: '%n %s' means 'Call Serial Number, followed by a blank space, followed by the Local Session Id'.

OBJECT-TYPE

The value of tmnxSubAcctPlcyDelayStartTime specifies, in seconds, the time an accounting-start gets delayed before being sent out. A value of 0 means there is no delay.

OBJECT-TYPE

The value of tmnxSubAcctPlcyTriggeredUpdates specifies whether accounting messages are sent for specific events: for instance gtp mobility events

OBJECT-TYPE

The value of tmnxSubAcctPlcyMcsIvl specifies the interval at which accounting data of subscriber hosts will be updated over MCS. If set to -1, the same value as tmnxSubAcctPlcyUpdateIvl will be used. If set to 0, no MCS updates will be sent.

OBJECT-TYPE

The tmnxSubAcctPlcyRadServTable has an entry for each RADIUS server used for subscriber accounting.

OBJECT-TYPE

tmnxSubAcctPlcyRadServEntry is an entry (conceptual row) in the tmnxSubAcctPlcyRadServTable. Each entry represents the configuration for a RADIUS server. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubAcctPlcyRadServRowStatus. Entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadServPlcyName specifies a specific subscriber accounting policy in the tmnxSubAcctPlcyTable to which this RADIUS server is connected. Row creation will be denied if no policy with the same name occurs in the tmnxSubAcctPlcyTable.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadServIndex specifies a specific RADIUS server in the policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadServRowStatus controls the creation and deletion of rows in the table.

OBJECT-TYPE

The value tmnxSubAcctPlcyRadServLstMgtChg indicates the sysUpTime at the time of the most recent management-initiated change to this policy server.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadServAddrType specifies the type of address stored in tmnxSubAcctPlcyRadServAddr.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadServAddr specifies the IP address of the RADIUS server. A valid unicast IP address must be specified for row creation to succeed.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadServSecret specifies the secret key associated with the RADIUS server. An empty key is not accepted as input. However If this object is read an empty string is returned.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadServAcctPort specifies the UDP port number on which to contact the RADIUS server for accounting.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadServOperState indicates the operational state of the RADIUS server.

OBJECT-TYPE

The tmnxSubAcctPlcyStatsTable has an entry for each subscriber RADIUS accounting policy configured in the system.

OBJECT-TYPE

Each row entry represents a collection of statistics for a subscriber RADIUS accounting policy in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The value of tmnxSubAcctPlcyTxRequests indicates the number of accounting requests transmitted for this policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRxResponses indicates the number of accounting responses received for this policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcyReqTimeouts indicates the number of accounting requests which have timed out for this policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcySendRetries indicates the number of retries to a different server for a single accounting request for this policy.

OBJECT-TYPE

The value of tmnxSubAcctPlcySendFail indicates how many accounting requests failed because the packet could not be sent out.

OBJECT-TYPE

The tmnxSubAcctPlcyRadStatsTable has an entry for each RADIUS accounting server configured in the system.

OBJECT-TYPE

Each row entry represents a collection of statistics for a specific RADIUS server in a subscriber accounting policy in the system. Entries cannot be created and deleted via SNMP SET operations.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadTxRequests indicates the number of accounting requests transmitted for this server.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadRxResponses indicates the number of accounting responses received for this server.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadReqTimeouts indicates the number of accounting requests which have timed out for this server.

OBJECT-TYPE

The value of tmnxSubAcctPlcyRadReqSendFail indicates the number of accounting requests failed because the packet could not be sent out.

OBJECT-TYPE

The tmnxSubIPolAppProfileMapTable has an entry for each application profile string to application profile name mapping defined under a subscriber identification policy configured in the system.

OBJECT-TYPE

Each row entry represents an application profile string to application profile name mapping defined under a subscriber identification policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubIPolAppProfMapRowStatus.

OBJECT-TYPE

The value of tmnxSubIPolAppProfMapAppString specifies the application profile string for this row.

OBJECT-TYPE

The value of tmnxSubIPolAppProfMapRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubIPolAppProfMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubIPolAppProfMapAppProfile specifies the application profile name corresponding to this row. Application profiles are configured in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable

OBJECT-TYPE

The value of tmnxSubHsmdaIngQueueOvrTableLC indicates the sysUpTime at the time of the last modification of tmnxSubHsmdaIngQueueOvrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The tmnxSubHsmdaIngQueueOvrTable has an entry for each Hsmda ingress queue override configured on the system. This table is obsoleted in 10.0 Release.

OBJECT-TYPE

Each row entry represents a Hsmda ingress queue override record. Entries are created and deleted via SNMP SET operations on tmnxSubHsmdaIngQueueOvrRowStat.

OBJECT-TYPE

The value of tmnxSubHsmdaIngQueueOvrRowStat controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubHsmdaIngQueueOvrLastChgd indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubHsmdaIngQueueOvrPIR specifies the PIR rate in kbps allowed for this Hsmda ingress queue.

OBJECT-TYPE

The value of tmnxSubHsmdaIngQueueOvrCIR specifies the CIR rate in kbps allowed for this Hsmda ingress queue.

OBJECT-TYPE

The value of tmnxSubHsmdaIngQueueOvrSlpPlcy specifies the slope policy that defines the RED slopes for this Hsmda ingress queue.

OBJECT-TYPE

The value of tmnxSubHsmdaEgrQueueOvrTblLC indicates the sysUpTime at the time of the last modification of tmnxSubHsmdaEgrQueueOvrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The tmnxSubHsmdaEgrQueueOvrTable has an entry for each Hsmda egress queue override configured on the system. This table is obsoleted in 10.0 Release.

OBJECT-TYPE

Each row entry represents a Hsmda egress queue override record. Entries are created and deleted via SNMP SET operations on tmnxSubHsmdaEgrQueueOvrRowStat.

OBJECT-TYPE

The value of tmnxSubHsmdaEgrQueueOvrRowStat controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubHsmdaEgrQueueOvrLastChgd indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSubHsmdaEgrQueueOvrPIR specifies the PIR rate in kbps allowed for this Hsmda egress queue.

OBJECT-TYPE

The value of tmnxSubHsmdaEgrQueueOvrCIR specifies the CIR rate in kbps allowed for this Hsmda egress queue.

OBJECT-TYPE

The value of tmnxSubHsmdaEgrQueueOvrSlpPlcy specifies the slope policy that defines the RED slopes for this Hsmda egress queue.

OBJECT-TYPE

A table that contains HSMDA subscriber statistics.

OBJECT-TYPE

HSMDA statistics for a specific subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStSubPortId indicates the access port for this entry.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffTotalPkt indicates the total number of packets offered on ingress for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffTotalOct indicates the total number of octets offered on ingress for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngFwdInProfPkt indicates the number of in-profile packets forwarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngFwdOutProfPkt indicates the number of out-of-profile packets forwarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngFwdInProfOct indicates the number of out-of-profile octets forwarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngFwdOutProfOct indicates the number of out-of-profile octets forwarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngDropHiPrioPkt indicates the number of high priority packets discarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngDropLoPrioPkt indicates the number of low-priority packets discarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngDropHiPrioOct indicates the number of high priority octets discarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngDropLoPrioOct indicates the number of low-priority octets discarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrFwdInProfPkt indicates the number of in-profile packets forwarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrFwdOutProfPkt indicates the number of out-of-profile packets forwarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrFwdInProfOct indicates the number of out-of-profile octets forwarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrFwdOutProfOct indicates the number of out-of-profile octets forwarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrDropInProfPkt indicates the number of high priority packets discarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrDropOutProfPkt indicates the number of low-priority packets discarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrDropInProfOct indicates the number of high priority octets discarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrDropOutProfOct indicates the number of low-priority octets discarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffHiPrioPkt indicates the number of high priority packets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffHiPrioPktLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffHiPrioPkt.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffHiPrioPktHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffHiPrioPkt.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffHiPrioOct indicates the number of high priority octets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffHiPrioOctLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffHiPrioOct.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffHiPrioOctHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffHiPrioOct.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffLoPrioPkt indicates the number of low priority packets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffLoPrioPktLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffLoPrioPkt.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffLoPrioPktHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffLoPrioPkt.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffLoPrioOct indicates the number of low priority octets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffLoPrioOctLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffLoPrioOct.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffLoPrioOctHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffLoPrioOct.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffUncolPkt indicates the number of uncolored packets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffUncolPktLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffUncolPkt.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffUncolPktHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffUncolPkt.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffUncolOct indicates the number of uncolored octets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffUncolOctLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffUncolOct.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffUncolOctHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffUncolOct.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffV4Packets indicates the number of IPv4 packets offered on ingress for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffV4Octets indicates the number of IPv4 octets offered on ingress for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffV6Packets indicates the number of IPv6 packets offered on ingress for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngOffV6Octets indicates the number of IPv6 octets offered on ingress for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngDropV4Packets indicates the number of IPv4 packets discarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngDropV4Octets indicates the number of IPv4 octets discarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngDropV6Packets indicates the number of IPv6 packets discarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngDropV6Octets indicates the number of IPv6 octets discarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngFwdV4Packets indicates the number of IPv4 packets forwarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngFwdV4Octets indicates the number of IPv4 octets forwarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngFwdV6Packets indicates the number of IPv6 packets forwarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStIngFwdV6Octets indicates the number of IPv6 octets forwarded by the ingress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrDropV4Packets indicates the number of IPv4 packets discarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrDropV4Octets indicates the number of IPv4 octets discarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrDropV6Packets indicates the number of IPv6 packets discarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrDropV6Octets indicates the number of IPv6 octets discarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrFwdV4Packets indicates the number of IPv4 packets forwarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrFwdV4Octets indicates the number of IPv4 octets forwarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrFwdV6Packets indicates the number of IPv6 packets forwarded by the egress Qchip for this subscriber.

OBJECT-TYPE

The value of tmnxSubHsmdaStEgrFwdV6Octets indicates the number of IPv6 octets forwarded by the egress Qchip for this subscriber.

OBJECT-TYPE

A table that contains subscriber ingress HSMDA queue statistics.

OBJECT-TYPE

Ingress statistics about a specific subscriber's HSMDA queue.

OBJECT-TYPE

The value of tmnxSubIngQStatsQueueId index specifies the Hsmda ingress queue for this entry.

OBJECT-TYPE

The value of tmnxSubIngQStatsSubPortId indicates the access port for this entry.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffTotalPkts indicates the total number of packets offered for this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffTotalOcts indicates the total number of octets offered on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsFwdInProfPkts indicates the number of in-profile packets forwarded on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsFwdOutProfPkts indicates the number of out-of-profile packets forwarded on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsFwdInProfOcts indicates the number of out-of-profile octets forwarded on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsFwdOutProfOcts indicates the number of out-of-profile octets forwarded on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsDropHiPrioPkts indicates the number of high priority packets dropped on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsDropLoPrioPkts indicates the number of low-priority packets dropped on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsDropHiPrioOcts indicates the number of high priority octets dropped on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsDropLoPrioOcts indicates the number of low-priority octets dropped on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffHiPrioPkts indicates the number of high priority packets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffHiPrioPktsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffHiPrioPkts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffHiPrioPktsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffHiPrioPkts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffLoPrioPkts indicates the number of low-priority packets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffLoPrioPktsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffLoPrioPkts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffLoPrioPktsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffLoPrioPkts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffHiPrioOcts indicates the number of high priority octets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffHiPrioOctsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffHiPrioOcts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffHiPrioOctsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffHiPrioOcts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffLoPrioOcts indicates the number of low-priority octets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffLoPrioOctsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffLoPrioOcts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffLoPrioOctsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffLoPrioOcts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffUncolPkts indicates the number of uncolored packets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffUncolPktsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffUncolPkts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffUncolPktsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffUncolPkts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffUncolOcts indicates the number of uncolored octets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffUncolOctsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffUncolOcts.

OBJECT-TYPE

The value of tmnxSubIngQStatsOffUncolOctsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffUncolOcts.

OBJECT-TYPE

The value of tmnxSubIngQStatModeFormat indicates the stat mode format of this ingress QoS queue of this subscriber.

OBJECT-TYPE

A table that contains subscriber egress HSMDA queue statistics.

OBJECT-TYPE

Egress statistics about a specific subscriber's HSMDA queue.

OBJECT-TYPE

The value of tmnxSubEgrQStatsQueueId index specifies the Hsmda egress queue for this entry.

OBJECT-TYPE

The value of tmnxSubEgrQStatsSubPortId indicates the access port for this entry.

OBJECT-TYPE

The value of tmnxSubEgrQStatsFwdInProfPkts indicates the number of in-profile packets forwarded on egress on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQStatsFwdOutProfPkts indicates the number of out-of-profile packets forwarded on egress on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQStatsFwdInProfOcts indicates the number of out-of-profile octets forwarded on egress on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQStatsFwdOutProfOcts indicates the number of out-of-profile octets forwarded on egress on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQStatsDropInProfPkts indicates the number of high priority packets dropped on egress on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQStatsDropOutProfPkts indicates the number of low-priority packets dropped on egress on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQStatsDropInProfOcts indicates the number of high priority octets dropped on egress on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQStatsDropOutProfOcts indicates the number of low-priority octets dropped on egress on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrQStatModeFormat indicates the stat mode format of this egress QoS queue of this subscriber.

OBJECT-TYPE

A table that contains ingress HSMDA counter subscriber statistics. This table is obsoleted in 10.0 release.

OBJECT-TYPE

Ingress statistics about a specific subscriber's HSMDA counter.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrId indicates the counter ID for the statistics.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrSubPortId indicates the access port for this entry.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrOffTotalPkts indicates the total number of packets offered on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrOffTotalOcts indicates the total number of octets offered on ingress on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrFwdInProfPkts indicates the number of in-profile packets forwarded for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrFwdOutProfPkts indicates the number of out-of-profile packets forwarded for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrFwdInProfOcts indicates the number of in-profile octets forwarded for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrFwdOutProfOcts indicates the number of out-of-profile octets forwarded for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrDropHiPrioPkts indicates the number of high priority packets dropped for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrDropLoPrioPkts indicates the number of low-priority packets dropped for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrDropHiPrioOcts indicates the number of high priority octets dropped for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubIngOvrCntrDropLoPrioOcts indicates the number of low-priority octets dropped for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

OBJECT-TYPE

A table that contains egress HSMDA counter subscriber statistics.

OBJECT-TYPE

Egress statistics about a specific subscriber's HSMDA counter.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrId indicates the counter ID for the statistics.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrSubPortId indicates the access port for this entry.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrFwdInProfPkts indicates the number of in-profile packets forwarded for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrFwdOutProfPkts indicates the number of out-of-profile packets forwarded for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrFwdInProfOcts indicates the number of in-profile octets forwarded for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrFwdOutProfOcts indicates the number of out-of-profile octets forwarded for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrDropInProfPkts indicates the number of high priority packets dropped for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrDropOutProfPkts indicates the number of low-priority packets dropped for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrDropInProfOcts indicates the number of high priority octets dropped for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrDropOutProfOcts indicates the number of low-priority octets dropped for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

OBJECT-TYPE

The value of tmnxSubEgrOvrCntrStatModeFormat indicates the stat mode format of this egress override counter of this subscriber.

OBJECT-TYPE

The tmnxSubHostInfoV2Table has an entry for each subscriber host found in the system.

OBJECT-TYPE

Each row entry contains information about a particular subscriber host available in the system.

OBJECT-TYPE

The value of tmnxSubHostInfoV2IpAddressType specifies the type of address stored in tmnxSubHostInfoV2IpAddress.

OBJECT-TYPE

The value of tmnxSubHostInfoV2IpAddress specifies the IP address of this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2MacAddress specifies the MAC address of this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2PppoeSessionId specifies the PPPoE session id of this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2FwdingState indicates the forwarding state of this subscriber host. When the value is 'outOfService', host traffic is not forwarded. When it is 'inService', host traffic is forwarded.

OBJECT-TYPE

The value of tmnxSubHostInfoV2Origin indicates the origin of this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2SubIdent indicates the subscriber identification applicable for this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object may contain an empty string.

OBJECT-TYPE

The value of tmnxSubHostInfoV2SubProfile indicates the subscriber profile (found in tmnxSubProfileTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

OBJECT-TYPE

The value of tmnxSubHostInfoV2SLAProfile indicates the SLA profile (found in tmnxSLAProfileTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

OBJECT-TYPE

The value of tmnxSubHostInfoV2AppProfile indicates the application profile (found in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

OBJECT-TYPE

The value of tmnxSubHostInfoV2RetailerSvcId indicates the service ID of the retailer VPRN service to which this subscriber host belongs. When this object is non zero, the subscriber host belongs to a retailer VPRN.

OBJECT-TYPE

The value of tmnxSubHostInfoV2RetailerIf indicates the interface index of the retailer VPRN interface to which this subscriber host belongs. When this object is non zero, the subscriber host belongs to a retailer VPRN.

OBJECT-TYPE

The value of tmnxSubHostInfoV2PfxLen indicates the length of the prefix stored in tmnxSubHostInfoV2IpAddress.

OBJECT-TYPE

The value of tmnxSubHostInfoV2EgrQGrpName indicates the port access egress queue group (found in TIMETRA-PORT-MIB.mib::tPortAccEgrQGrpTable) used by this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2EgrVPortName indicates the port access egress virtual port (found in TIMETRA-PORT-MIB.mib::tPortEgrVPortTable) used by this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2AcctSessionId indicates the RADIUS accounting session id for this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2AddressOrigin indicates the origin of the subscriber host address. This object is only applicable for L3 subscriber hosts.

OBJECT-TYPE

The value of tmnxSubHostInfoV2PppIndex indicates the index in the tmnxSubPppTable for PPP hosts. The value of tmnxSubHostInfoV2PppIndex is equal to zero for other types of hosts.

OBJECT-TYPE

The value of tmnxSubHostInfoV2AcctMultiSessId indicates the RADIUS accounting session id of the queue-instance of this subscriber host. This is the accounting session id of the SLA profile instance on a non-hsmda or the accounting session id of the subscriber on a hsmda.

OBJECT-TYPE

The value of tmnxSubHostInfoV2IngFilter indicates if and how for this host the ingress filter specified in the SLA-profile is overruled.

OBJECT-TYPE

The value of tmnxSubHostInfoV2EgrFilter indicates if and how for this host the egress filter specified in the SLA-profile is overruled.

OBJECT-TYPE

The value of tmnxSubHostInfoV2OtHttpRdrState indicates the state of One-Time HTTP redirection for this host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2OtHttpRdrFilter indicates if and how for this host the one-time HTTP redirect filter specified in the SLA-profile is overruled.

OBJECT-TYPE

The value of tmnxSubHostInfoV2OtHttpRdrSource indicates the source of One-Time HTTP redirection for this host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2HttpRdrUrlOvrd indicates a possible override of the HTTP redirect URL for this host. An empty string will be returned when the default redirect URL is used (found in TIMETRA-FILTER-MIB.mib::tIPFilterParamsTable or TIMETRA-FILTER-MIB.mib::tIPv6FilterParamsTable)

OBJECT-TYPE

The value of tmnxSubHostInfoV2GtpLclBrkout indicates if this host is a GTP (GPRS Tunnel Protocol) host with a local breakout. By default, the traffic of such a host would go into a GTP tunnel, but selected flows are redirected through a NAT function and routed in the context of the WLAN Gateway (this system); flows can be selected with a filter, specifying 'gtpLclBrkout' as filter action.

OBJECT-TYPE

The value of tmnxSubHostInfoV2DiamSessId indicates the identifier of the DIAMETER session associated with this subscriber host. The empty string indicates that there is no DIAMETER session associated with this subscriber host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2IpoeIndex indicates the index in the tmnxSubIpoeTable for IPoE hosts. The value of tmnxSubHostInfoV2IpoeIndex is equal to zero for other types of hosts.

OBJECT-TYPE

If different from 0, the value of tmnxSubHostInfoV2IngQosPolIdOvr indicates the ID of the overriding ingress Qos policy as requested by this host.

OBJECT-TYPE

If different from 0, the value of tmnxSubHostInfoV2EgrQosPolIdOvr indicates the ID of the overriding egress Qos policy as requested by this host.

OBJECT-TYPE

The value of tmnxSubHostInfoV2SpiGroupType indicates the meaning of the tmnxSubSpiGroupId.

OBJECT-TYPE

The value of tmnxSubHostInfoV2SpiGroupId indicates the SLA profile instance group identifier. If the value of tmnxSubHostInfoV2SpiGroupType is equal to 'perSap', the value of tmnxSubHostInfoV2SpiGroupId is always equal to one. If the value of tmnxSubHostInfoV2SpiGroupType is equal to 'perGroup', the value of tmnxSubHostInfoV2SpiGroupId is a group identifier specified by an AAA server. If the value of tmnxSubHostInfoV2SpiGroupType is equal to 'perSessionPpp', the value of tmnxSubHostInfoV2SpiGroupId is a PPP session identifier, as indicated by the object tmnxSubPppIndex. If the value of tmnxSubHostInfoV2SpiGroupType is equal to 'perSessionIpoe', the value of tmnxSubHostInfoV2SpiGroupId is an IPoE session identifier, as indicated by the object tmnxSubIpoeIndex.

OBJECT-TYPE

The tmnxSLAProfInstSubHostV2Table has an entry for each subscriber host found in the system, sorted by SLA profile instance. Using this table is discouraged. Please use the tmnxSubSpiHostTable instead.

OBJECT-TYPE

Each row entry indicates a particular subscriber host available in the system.

OBJECT-TYPE

The value of tmnxSPISubHostV2IpAddressType specifies the type of address stored in tmnxSPISubHostV2IpAddress.

OBJECT-TYPE

The value of tmnxSPISubHostV2IpAddress specifies the IP address of this subscriber host.

OBJECT-TYPE

The value of tmnxSPISubHostV2MacAddress indicates the MAC address of this subscriber host.

OBJECT-TYPE

The value of tmnxSPISubHostV2PppoeSessionId specifies the PPPoE session id of this subscriber host.

OBJECT-TYPE

The value of tmnxSPISubHostV2Origin indicates the origin of this subscriber host.

OBJECT-TYPE

The value of tmnxSPISubHostV2PfxLen indicates the prefix length associated with the subscriber host IP address indicated by tmnxSPISubHostV2IpAddress.

OBJECT-TYPE

The value of tmnxSPISubHostV2Service indicates the identifier of the service where this host belongs to.

OBJECT-TYPE

The tmnxSubTrkPlcyTable allows configuration of subscriber IGMP Host tracking policy parameters.

OBJECT-TYPE

tmnxSubTrkPlcyEntry is an entry (conceptual row) in the tmnxSubTrkPlcyTable. Each entry represents the configuration for an IGMP Host Tracking policy. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubTrkPlcyRowStatus. Entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tmnxSubTrkPlcyName specifies a specific subscriber IGMP Host Tracking policy.

OBJECT-TYPE

The value of tmnxSubTrkPlcyRowStatus controls the creation and deletion of rows in the table.

OBJECT-TYPE

The value of tmnxSubTrkPlcyLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this policy.

OBJECT-TYPE

The value of tmnxSubTrkPlcyDescription specifies the user provided description of this subscriber IGMP Host Tracking policy.

OBJECT-TYPE

The value of tmnxSubTrkPlcyEgrRateModType specifies the egress-rate modification that is to be applied. If set to 'namedScheduler', the scheduler as defined in tmnxSubTrkPlcyEgrRateModSched is used.

OBJECT-TYPE

The value of tmnxSubTrkPlcyEgrRateModSched specifies the scheduler to be applied for egress rate modification. The value is only considered if tmnxSubTrkPlcyEgrRateModType is set to 'namedScheduler'.

OBJECT-TYPE

The value of tmnxSubTrkPlcyMcRprtDestName specifies the multicast reporting destination (found in TIMETRA-MCAST-PATH-MGMT-MIB::tmnxMcPathRprtDestTable) or it can be an empty string.

OBJECT-TYPE

The value of tmnxSubTrkPlcyMcRprtOptFields specifies what optional fields should be included into the multicast reporting messages.

OBJECT-TYPE

The value of tmnxSubTrkPlcyMcRprtAdminState specifies the administrative state of the multicast reporting. When the value is 'outOfService', no multicast reports are sent. When it is 'inService', multicast reports are sent to the destination as indicated by tmnxSubTrkPlcyMcRprtDestName.

OBJECT-TYPE

The tmnxSubTrkStatusTable has an entry for each subscriber that is associated with a host tracking policy. A subscriber is associated with a host tracking policy if the value of the object tmnxSubInfoSubProfile refers to a subscriber policy where the value of the object tmnxSubProfHostTrackingPolicy is not empty.

OBJECT-TYPE

Each row entry represents status and statistics information about the QoS scheduler adjustments based on video viewership of this subscriber's hosts. Rows are created or removed automatically by the system.

OBJECT-TYPE

The value of tmnxSubTrkStatusPlcyName indicates the name of the host tracking policy associated with this subscriber. An empty string indicates that no host tracking policy is associated with this subscriber.

OBJECT-TYPE

The value of tmnxSubTrkStatusEgrRateReduction indicates the egress rate reduction to be applied for this subscriber in order to account for its video viewership.

OBJECT-TYPE

The tmnxSubHostTrkTable shows status and statistics information about the video viewership of subscriber hosts.

OBJECT-TYPE

Each row entry represents status information about a particular multicast stream associated with a particular subscriber host. Rows are created or removed automatically by the system. Rows are only created for a subscriber that is associated with a host tracking policy. A subscriber is associated with a host tracking policy if the value of the object tmnxSubInfoSubProfile refers to a subscriber policy where the value of the object tmnxSubProfHostTrackingPolicy is not empty

OBJECT-TYPE

The value of tmnxSubHostTrkGrpAddrType indicates the address type of tmnxSubHostTrkGrpAddr.

OBJECT-TYPE

The value of tmnxSubHostTrkGrpAddr indicates the multicast group address.

OBJECT-TYPE

The value of tmnxSubHostTrkSrcAddrType indicates the address type of tmnxSubHostTrkSrcAddr.

OBJECT-TYPE

The value of tmnxSubHostTrkSrcAddr indicates the address of the source that sends multicast traffic to the group identified by tmnxSubHostTrkGrpAddr.

OBJECT-TYPE

The value of tmnxSubHostTrkBw indicates the bandwidth allocated to this subscriber host for this multicast stream.

OBJECT-TYPE

The value of tmnxSubHostTrkUpTime indicates the time (in centiseconds) that the subscriber host identified by tmnxSubInfoSubIdent is associated with the multicast group identified by tmnxSubHostTrkGrpAddr through the multicast source identified by tmnxSubHostTrkSrcAddr.

OBJECT-TYPE

The value of tmnxSubHostTrkExpiryTime indicates the time in seconds that this system will continue to track this host.

OBJECT-TYPE

The tmnxSubHostSapTrkTable shows status information about the video viewership of hosts, ordered by SAP.

OBJECT-TYPE

Each row entry represents status and statistics information about a particular host associated with a particular multicast stream. Rows are created or removed automatically by the system.

OBJECT-TYPE

The value of tmnxSubHostSapTrkHostAddrType indicates the address type of tmnxSubHostSapTrkHostAddr.

OBJECT-TYPE

The value of tmnxSubHostSapTrkHostAddr indicates the address of the host.

OBJECT-TYPE

The value of tmnxSubHostSapTrkGrpAddrType indicates the address type of tmnxSubHostSapTrkGrpAddr.

OBJECT-TYPE

The value of tmnxSubHostSapTrkGrpAddr indicates the multicast group address.

OBJECT-TYPE

The value of tmnxSubHostSapTrkSrcAddrType indicates the address type of tmnxSubHostSapTrkSrcAddr.

OBJECT-TYPE

The value of tmnxSubHostSapTrkSrcAddr indicates the address of the source that sends multicast traffic to the group identified by tmnxSubHostSapTrkGrpAddr.

OBJECT-TYPE

The value of tmnxSubHostSapTrkBw indicates the bandwidth allocated to this host for this multicast stream.

OBJECT-TYPE

The value of tmnxSubHostSapTrkUpTime indicates the time (in centiseconds) that the host is associated with the multicast group identified by tmnxSubHostSapTrkGrpAddr through the multicast source identified by tmnxSubHostSapTrkSrcAddr.

OBJECT-TYPE

The value of tmnxSubHostSapTrkExpiryTime indicates the time in seconds that this system will continue to track this host.

OBJECT-TYPE

The value of tmnxSubHostSapTrkSubIdent indicates the subscriber identification of this subscriber host. The subscriber identification is only available in case of enhanced subscriber management. In other cases, the value of tmnxSubHostSapTrkSubIdent is empty.

OBJECT-TYPE

The tmnxSubHostGrpTrkTable shows status and statistics information about the video viewership of hosts, ordered by multicast group.

OBJECT-TYPE

Each row entry represents status and statistics information about a particular multicast stream associated with a particular host. Rows are created or removed automatically by the system.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkGrpAddrType indicates the address type of tmnxSubHostGrpTrkGrpAddr.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkGrpAddr indicates the multicast group address.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkSrcAddrType indicates the address type of tmnxSubHostGrpTrkSrcAddr.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkSrcAddr indicates the address of the source that sends multicast traffic to the group identified by tmnxSubHostGrpTrkGrpAddr.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkHostAddrType indicates the address type of tmnxSubHostGrpTrkHostAddr.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkHostAddr indicates the address of the host.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkUpTime indicates the time (in centiseconds) that the host is associated with the multicast group identified by tmnxSubHostGrpTrkGrpAddr through the multicast source identified by tmnxSubHostGrpTrkSrcAddr.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkExpiryTime indicates the time in seconds that this system will continue to track this host.

OBJECT-TYPE

The value of tmnxSubHostGrpTrkSubIdent indicates the subscriber identification of this subscriber host. The subscriber identification is only available in case of enhanced subscriber management. In other cases, the value of tmnxSubHostGrpTrkSubIdent is empty.

OBJECT-TYPE

The tmnxSubGrpTrkTable shows status and statistics information about the video viewership of subscriber hosts.

OBJECT-TYPE

Each row entry represents status and statistics information about a particular subscriber host associated with a particular multicast stream. Rows are created or removed automatically by the system. Rows are only created for a subscriber that is associated with a host tracking policy. A subscriber is associated with a host tracking policy if the value of the object tmnxSubInfoSubProfile refers to a subscriber policy where the value of the object tmnxSubProfHostTrackingPolicy is not empty

OBJECT-TYPE

The value of tmnxSubGrpTrkGrpAddrType indicates the address type of tmnxSubGrpTrkGrpAddr.

OBJECT-TYPE

The value of tmnxSubGrpTrkGrpAddr indicates the multicast group address.

OBJECT-TYPE

The value of tmnxSubGrpTrkSrcAddrType indicates the address type of tmnxSubGrpTrkSrcAddr.

OBJECT-TYPE

The value of tmnxSubGrpTrkSrcAddr indicates the address of the source that sends multicast traffic to the group identified by tmnxSubGrpTrkGrpAddr.

OBJECT-TYPE

The value of tmnxSubGrpTrkBw indicates the bandwidth allocated to this subscriber host for this multicast stream.

OBJECT-TYPE

The value of tmnxSubGrpTrkUpTime indicates the time (in centiseconds) that the subscriber host identified by tmnxSubInfoSubIdent is associated with the multicast group identified by tmnxSubGrpTrkGrpAddr through the multicast source identified by tmnxSubGrpTrkSrcAddr.

OBJECT-TYPE

The value of tmnxSubGrpTrkExpiryTime indicates the time in seconds that this system will continue to track this host.

OBJECT-TYPE

The value of tmnxSubApCustRecordLastChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCustRecordTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The Nokia SROS series tmnxSubApCustRecordTable augments tmnxSubAcctPlcyTable. The table allows to configure the layout and setting for a custom accounting record associated with this policy.

OBJECT-TYPE

Defines an entry in the tmnxSubApCustRecordTable. Entries in this table are created and destroyed via SNMP Set requests to the tmnxSubAcctPlcyRowStatus object of the tmnxSubAcctPlcyTable.

OBJECT-TYPE

The value of tmnxSubApCrLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since the box was last initialized.

OBJECT-TYPE

The value of tmnxSubApCrSignChangeDelta specifies the delta change (significant change) that is required for the custom record to be written to the xml file.

OBJECT-TYPE

The value of tmnxSubApCrSignChangeQueue specifies the reference queue to which the significant change defined in tmnxSubApCrSignChangeDelta applies.

OBJECT-TYPE

The value of tmnxSubApCrSignChangeOCntr specifies the counter-id that will be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies.

OBJECT-TYPE

The value of tmnxSubApCrSignChangeQICounters specifies the ingress counter Ids in the queue defined by tmnxSubApCrSignChangeQueue to be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies. A non-zero value of this object is only allowed if the object tmnxSubApCrSignChangeQueue has a non-zero value.

OBJECT-TYPE

The value of tmnxSubApCrSignChangeQECounters specifies the egress counter Ids in the queue defined by tmnxSubApCrSignChangeQueue to be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies. A non-zero value of this object is only allowed if the object tmnxSubApCrSignChangeQueue has a non-zero value.

OBJECT-TYPE

The value of tmnxSubApCrSignChangeOICounters specifies the ingress counter Ids in the counter-group defined by tmnxSubApCrSignChangeOCntr to be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies. A non-zero value of this object is only allowed if the object tmnxSubApCrSignChangeOCntr has a non-zero value.

OBJECT-TYPE

The value of tmnxSubApCrSignChangeOECounters specifies the egress counter Ids in the counter-group defined by tmnxSubApCrSignChangeOCntr to be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies. A non-zero value of this object is only allowed if the object tmnxSubApCrSignChangeOCntr has a non-zero value.

OBJECT-TYPE

The value of tmnxSubApCustRecQueueLastChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCustRecordQueueTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The Nokia SROS series tmnxSubApCustRecordQueueTable allows to create custom record queue information for a given RADIUS accounting policy. Rows can only be created for existing accounting policies (as defined in tmnxSubApTable).

OBJECT-TYPE

Defines an entry in the tmnxSubApCustRecordQueueTable. Entries in this table are created and destroyed via SNMP Set requests.

OBJECT-TYPE

The value of tmnxSubApCrQueueId specifies the queue ID for which counters will be collected in this custom record. The counters that will be collected are defined in tmnxSubApCrQueueICounters and tmnxSubApCrQueueECounters.

OBJECT-TYPE

Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubApCrQueueLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

OBJECT-TYPE

The value of tmnxSubApCrQueueICounters specifies the list of ingress counters that need to be collected in this custom record. At least one of the objects tmnxSubApCrQueueICounters or tmnxSubApCrQueueECounters must have a non-zero value.

OBJECT-TYPE

The value of tmnxSubApCrQueueECounters specifies the list of egress counters that need to be collected in this custom record. At least one of the objects tmnxSubApCrQueueICounters or tmnxSubApCrQueueECounters must have a non-zero value.

OBJECT-TYPE

The value of tmnxSubApCustRecOvrCtrLastChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCrOverrideCntrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The Nokia SROS series tmnxSubApCrOverrideCntrTable allows to create custom record counter override information for a given accounting policy. Rows can only be created for existing accounting policies (as defined in tmnxSubApTable).

OBJECT-TYPE

Defines an entry in the tmnxSubApCrOverrideCntrTable. Entries in this table are created and destroyed via SNMP Set requests.

OBJECT-TYPE

The value of tmnxSubApCrOverrideCntrId specifies the counter group for which counters will be collected in this custom record. The counters that will be collected are defined in tmnxSubApCrOverrideCntrICounters and tmnxSubApCrOverrideCntrECounters.

OBJECT-TYPE

Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubApCrOverrideCntrLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

OBJECT-TYPE

The value of tmnxSubApCrOverrideCntrICounters specifies the list of ingress counters that need to be collected in this custom record. At least one of the objects tmnxSubApCrOverrideCntrICounters or tmnxSubApCrOverrideCntrECounters must have a non-zero value.

OBJECT-TYPE

The value of tmnxSubApCrOverrideCntrECounters specifies the list of egress counters that need to be collected in this custom record. At least one of the objects tmnxSubApCrOverrideCntrICounters or tmnxSubApCrOverrideCntrECounters must have a non-zero value.

OBJECT-TYPE

The value of tmnxSubApCCPlcyTableLastChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCreditControlPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The Nokia SROS series tmnxSubApCreditControlPlcyTable allows to configure a Credit Control (CC) policy.

OBJECT-TYPE

Defines an entry in the tmnxSubApCreditControlPlcyTable. Entries in this table are created and destroyed via SNMP Set requests.

OBJECT-TYPE

The value of tmnxSLAProfCreditControlPolicy specifies the Credit Control Policy name

OBJECT-TYPE

Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubCcPlcyLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

OBJECT-TYPE

The value of tmnxSubCcPlcyDescription specifies a user provided description of this policy.

OBJECT-TYPE

The value of the object tmnxSubCcPlcyDiameterPlcy specifies the Diameter policy to be used to access the Credit Control server. If set to the empty string, the RADIUS protocol is used by default.

OBJECT-TYPE

The value of the object tmnxSubCcPlcyDefaultCategoryMap specifies the category map to be used by this Credit Control policy. The category map must be defined in tmnxSubApCategoryMapTable.

OBJECT-TYPE

The value of the object tmnxSubCcPlcyOutOfCreditAction specifies the action to be taken when the available credit is used up. The value none(0) is not allowed for this object.

OBJECT-TYPE

The value of the object tmnxSubCcPlcyErrorHandlingAction specifies the action to be taken when an error occurs in the CC determination.

OBJECT-TYPE

The value of tmnxSubApCategoryMapTblLstChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCategoryMapTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The Nokia SROS series tmnxSubApCategoryMapTable allows to configure a Credit Control (CC) Category Map.

OBJECT-TYPE

Defines an entry in the tmnxSubApCategoryMapTable. Entries in this table are created and destroyed via SNMP Set requests.

OBJECT-TYPE

The value of tmnxSubApCMapName specifies the Category Map name

OBJECT-TYPE

Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubApCMapLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

OBJECT-TYPE

The value of tmnxSubApCMapDescription specifies a user provided description of this category map.

OBJECT-TYPE

The value of tmnxSubApCMapCreditType specifies whether volume or time based accounting is performed.

OBJECT-TYPE

The value of tmnxSubApCMapCreditExhstThrshld specifies the credit exhaust threshold taken into account to take action.

OBJECT-TYPE

The value of tmnxSubApCMapActivityThreshold specifies the threshold (in Kbps) that is applied to determine whether or not activity is going on.

OBJECT-TYPE

The value of tmnxSubApCMapGxSessionLvlUsage specifies if this category map supports gx session level usage monitoring. For backwards compatibility reasons the system does not set the value of this object to its default value when loading a configuration file while booting. It rather sets the value to 'true' if the category map contains 2 categories or less, and to 'false' otherwise.

OBJECT-TYPE

The value of tmnxSubApCategoryTblLstChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCategoryTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The Nokia SROS series tmnxSubApCategoryTable allows to configure a Credit Control (CC) Category.

OBJECT-TYPE

Defines an entry in the tmnxSubApCategoryTable. Entries in this table are created and destroyed via SNMP Set requests.

OBJECT-TYPE

The value of tmnxSubApCategoryName specifies the Category name

OBJECT-TYPE

Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSubApCategoryLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

OBJECT-TYPE

The value of tmnxSubApCategoryDescription specifies a user provided description of this category.

OBJECT-TYPE

The value of tmnxSubApCategoryIngressQueues specifies, which ingress queues are defined in this category.

OBJECT-TYPE

The value of tmnxSubApCategoryEgressQueues specifies, which egress queues are defined in this category.

OBJECT-TYPE

The value of tmnxSubApCategoryUseRatingGroup specifies whether or not the rating group defined in tmnxSubApCategoryRatingGroup is applicable for this category.

OBJECT-TYPE

The value of tmnxSubApCategoryRatingGroup specifies the rating group applicable for this category. The value of this object is only considered if the object tmnxSubApCategoryUseRatingGroup is set to 'true'.

OBJECT-TYPE

The value of tmnxSubApCategoryCTypeOverride, if different from 'none' overrides the credit-type as defined in tmnxSubApCMapCreditType.

OBJECT-TYPE

The value of tmnxSubApCategoryDfltCrdtVolume, if different from 0, specifies the default value for the Volume credit. Low values may be rejected or increased by the system depending on the systems resources.

OBJECT-TYPE

The value of tmnxSubApCategoryDfltCrdtVolUnit specifies the unit in which the default value for the Volume credit is expressed.

OBJECT-TYPE

The value of tmnxSubApCategoryDfltCrdtTime, if different from 0, specifies the default value for the Time credit. Low values may be rejected or increased by the system depending on the systems resources.

OBJECT-TYPE

The value of tmnxSubApCategoryOutOfCrdtAction, if different from none, specifies the action to be taken if the credit es exhausted. If set to none, the action as specified in tmnxSubCcPlcyOutOfCreditAction applies. The value disconnectHost(2) is not allowed for this object.

OBJECT-TYPE

The value of tmnxSubApCategoryPir, specifies the PIR rate override value for this category.

OBJECT-TYPE

The value of tmnxSubApCategoryIngressPolicers specifies, which ingress policers are defined in this category.

OBJECT-TYPE

The value of tmnxSubApCategoryEgressPolicers specifies, which egress policers are defined in this category.

OBJECT-TYPE

The tmnxSubTrkPlcySubscriberTable shows the subscribers associated with their IGMP Host Tracking policy.

OBJECT-TYPE

Each row entry represents a particular subscriber associated with a particular IGMP Host Tracking policy.

OBJECT-TYPE

The value of tmnxSubTrkPlcySubscriberId indicates the subscriber identification.

OBJECT-TYPE

The tmnxSPICatTable contains volume and time based accounting information for active subscribers. Using this table is discouraged. Please use the tmnxSubSpiCatTable instead.

OBJECT-TYPE

Each row entry contains volume & time based accounting information for a subscriber, SLA profile and credit category.

OBJECT-TYPE

The value of tmnxSPICatName indicates the credit category.

OBJECT-TYPE

The value of tmnxSPICatMapName indicates the credit category map.

OBJECT-TYPE

The value of tmnxSPICatCreditControlPlcy indicates the credit control policy.

OBJECT-TYPE

The value of tmnxSPICatCrdtVolumeUsed indicates the volume based credit used.

OBJECT-TYPE

The value of tmnxSPICatCrdtVolumeAvail indicates the volume based credit available.

OBJECT-TYPE

The value of tmnxSPICatCrdtVolumeThres indicates the volume based credit threshold. If tmnxSPICatCrdtVolumeAvail becomes lower, then credit negotiation will start.

OBJECT-TYPE

The value of tmnxSPICatCrdtTimeUsed indicates the time based credit used.

OBJECT-TYPE

The value of tmnxSPICatCrdtTimeAvail indicates the time based credit available.

OBJECT-TYPE

The value of tmnxSPICatCrdtTimeThres indicates the time based credit threshold. If tmnxSPICatCrdtTimeAvail becomes lower, then credit negotiation will start.

OBJECT-TYPE

The value of tmnxSPICatCrdtExpired indicates whether credit has expired.

OBJECT-TYPE

The value of tmnxSPICatCrdtNegotiating indicates whether credit is being negotiated.

OBJECT-TYPE

The value of tmnxSPICatOutOfCrdtAction indicates what will happen when credit gets exhausted.

OBJECT-TYPE

The value of tmnxSPICatQuotaHoldingTime indicates the time after which credit negotiation will start when the subscriber activity rate falls below the activity threshold.

OBJECT-TYPE

The value of tmnxSPICatCrdtVolumeAvailIng indicates the volume based credit available for ingress packets.

OBJECT-TYPE

The value of tmnxSPICatCrdtVolumeAvailEgr indicates the volume based credit available for egress packets.

OBJECT-TYPE

The value of tmnxSPICatCrdtVolumeUsedIng indicates the volume based credit used by ingress packets.

OBJECT-TYPE

The value of tmnxSPICatCrdtVolumeUsedEgr indicates the volume based credit used by egress packets.

OBJECT-TYPE

The value of tmnxSPICatValidityTimeUsed indicates the used portion of the validity time of the granted service units. When the service units are granted by the Online Charging Server (OCS), the validity time is provided by the OCS. When the service units are granted by the configured default volume credit (configured in tmnxSubApCategoryDfltCrdtVolume or tmnxDiamGyEfhInterimCreditVolume), the validity time is defined in tmnxDiamGyEfhInterimCredValTime.

OBJECT-TYPE

The value of tmnxSPICatValidityTimeAvail indicates the time left from the validity time of the granted service units. When the service units are granted by the Online Charging Server (OCS), the validity time is provided by the OCS. When the service units are granted by the configured default volume credit (configured in tmnxSubApCategoryDfltCrdtVolume or tmnxDiamGyEfhInterimCreditVolume), the validity time is defined in tmnxDiamGyEfhInterimCredValTime.

OBJECT-TYPE

The value of tmnxSPICatEfhVolumeCurrUnrep indicates the used volume based credit, that is not yet reported to the OCS, while the EFH state is active for this diameter session.

OBJECT-TYPE

The value of tmnxSPICatEfhTimeCurrUnrep indicates the used time based credit, that will be reported to the OCS, while the EFH state is active for this diameter session.

OBJECT-TYPE

The value of tmnxSPICatEfhVolumeTotalUnrep indicates the total used volume based credit, that is not yet reported to the OCS, of all the periods that the diameter session was in EFH mode.

OBJECT-TYPE

The value of tmnxSPICatEfhTimeTotalUnrep indicates the total used time based credit, that will be reported to the OCS, of all the periods that the diameter session was in EFH mode.

OBJECT-TYPE

The object tmnxSPICatCrdtReset allows the operator to reset the credit for the accounting record represented by this row, by setting the object to 'doAction'. A GET on this object will always return 'notApplicable'.

OBJECT-TYPE

The value of tmnxSPICatAlias indicates the full name of the credit category. If the full name of the credit category exceeds 32 characters, it does not fit in the tmnxSPICatName object; in that case, the tmnxSPICatName object contains only the first 32 characters. It is not possible to have two different credit categories in this table when the first 32 characters of the name are identical.

OBJECT-TYPE

The value of tmnxSPICatHttpRdrUrlOvrd indicates the override of the HTTP redirect URL for this credit control instance. An empty string indicates that the default redirect URL is used; the default redirect URL is the value of tmnxCcIpFltrRedirectURL in the same credit-control category.

OBJECT-TYPE

The tmnxSubHostSapTrkStatsTable shows statistics information about the video viewership of hosts, ordered by SAP.

OBJECT-TYPE

Each row entry represents host tracking status and statistics information about a particular host. Rows are created or removed automatically by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table.

OBJECT-TYPE

The value of tmnxSubHostSapTrkStatsType indicates the type of host tracking statistics contained in tmnxSubHostSapTrkStatsVal.

OBJECT-TYPE

The value of tmnxSubHostSapTrkStatsVal indicates the value of the host tracking statistics of the type indicated by tmnxSubHostSapTrkStatsType, for this host.

OBJECT-TYPE

The tmnxSubHostTrkStatsTable shows statistics information about the video viewership of subscriber hosts.

OBJECT-TYPE

Each row entry represents host tracking statistics information about a particular subscriber host. Rows are created or removed automatically by the system. Rows are only created for a subscriber that is associated with a host tracking policy. A subscriber is associated with a host tracking policy if the value of the object tmnxSubInfoSubProfile refers to a subscriber policy where the value of the object tmnxSubProfHostTrackingPolicy is not empty. Moreover, rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table.

OBJECT-TYPE

The value of tmnxSubHostTrkStatsType indicates the type of host tracking statistics contained in tmnxSubHostTrkStatsVal.

OBJECT-TYPE

The value of tmnxSubHostTrkStatsVal indicates the value of the host tracking statistics of the type indicated by tmnxSubHostTrkStatsType, for this subscriber host.

OBJECT-TYPE

The tmnxSLAProfInstInfoTable has an entry for each SLA profile instance found in the system.

OBJECT-TYPE

Each row entry contains information about a particular SLA profile instance available in the system. Using this table is discouraged. Please use the tmnxSubSpiTable instead.

OBJECT-TYPE

The value of tmnxSPIInfoCategoryMapName indicates the name of the category map used by this SLA profile instance.

OBJECT-TYPE

The value of tmnxSPIInfoDiamSessId indicates the id of the diameter session used by this SLA profile instance.

OBJECT-TYPE

If different from 0, the value of tmnxSPIInfoIngQosPolIdOvr indicates the ID of the overriding ingress Qos policy.

OBJECT-TYPE

If different from 0, the value of tmnxSPIInfoEgrQosPolIdOvr indicates the ID of the overriding egress Qos policy.

OBJECT-TYPE

The value of tmnxSPIInfoAcctSessionId indicates the accounting session id of the host.

OBJECT-TYPE

The value of tmnxSPIInfoDiamEfhState indicates the Extended Failure Handling (EFH) state of the diameter session. active - The SLA Profile instance is using quota granted by interim credit. The value of object tmnxDiamGyEfhAdminState is set to 'enabled (1)'. inactive - The SLA Profile instance is using quota granted by the Online Charging Server (OCS). The value of object tmnxDiamGyEfhAdminState is set to 'enabled (1)'. disabled - EFH is disabled. The value of object tmnxDiamGyEfhAdminState is set to 'disabled (2)'. notApplicable - The SLA Profile instance has no diameter session.

OBJECT-TYPE

The value of tmnxSPIInfoDiamEfhUpTime indicates the time (duration in centiseconds) that tmnxSPIInfoDiamEfhState is 'active (1)'.

OBJECT-TYPE

The value of tmnxSPIInfoDiamEfhAttemps indicates the number of times the diameter session has assigned interim quota to the SLA Profile instance.

OBJECT-TYPE

The value of tmnxSPIInfoDiamEfhMaxAttemps indicates the maximum number of times the diameter session can assign interim quota to the SLA Profile instance.

OBJECT-TYPE

The value of tmnxSPIInfoDiamEfhTotActiveTime indicates total time the diameter credit control sessions has been in EFH mode.

OBJECT-TYPE

The value of tmnxSPIInfoDiamEfhTotActiveCount indicates how many times the diameter credit-control session has been in EFH mode.

OBJECT-TYPE

The value of tmnxSPIInfoDiamCcFailureHandling indicates which action is taken in case of a DCCA session failure. This action is configured in tmnxDiamAppPlcyFailureHndlng for the DIAMETER application policy, or it can be overruled by the Credit-Control-Failure-Handling AVP received for this DIAMETER session.

OBJECT-TYPE

The value of tmnxSPIInfoEgrHQosMgmtStatus indicates the hqos manageable state of egress qos policers.

OBJECT-TYPE

The value of tmnxSPIInfoBonded indicates whether this is a bonded SLA Profile instance.

OBJECT-TYPE

The value of tmnxSPIInfoEgrAggRateLimit indicates the SLA profile instance egress aggregate rate limit, regardless of its origin.

OBJECT-TYPE

The value of tmnxSPIInfoGxDiamSessId indicates the identifier of the Diameter Gx session used by this SLA profile instance.

OBJECT-TYPE

The value of tmnxCcIpFltrTableLastChange indicates the sysUpTime at the time of the last modification of tmnxSubCredCatIpFltrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table of all IP filter entries for all credit control (CC) Categories.

OBJECT-TYPE

Information about a particular Credit Control (CC) Category IP Filter entry. Every Credit Control (CC) Category can have zero or more IP Filter entries.

OBJECT-TYPE

The value of tmnxCcIpFltrDirection serves as a primary index for the IP filter entry and indicates whether this entry applies to the ingress/egress SAP.

OBJECT-TYPE

The value of tmnxCcIpFltrIndex serves as a secondary index for the IP filter entry.

OBJECT-TYPE

The value of tmnxCcIpFltrRowStatus controls the creation and deletion of rows in the table. Max. 10 entries can be created for any combination of tmnxSubApCMapName,tmnxSubApCategoryName.

OBJECT-TYPE

The value of tmnxCcIpFltrLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

OBJECT-TYPE

The value of tmnxCcIpFltrDescription specifies the user-provided description for this filter entry.

OBJECT-TYPE

The value of tmnxCcIpFltrAction specifies the action to take for packets that match this filter entry. The default value of 'drop(1)' will drop all matching packets. The value nat(5) is not supported.

OBJECT-TYPE

The value of tmnxCcIpFltrRedirectURL specifies the URL to redirect to, when the value of tmnxCcIpFltrAction is 'httpRedirect'.

OBJECT-TYPE

The value of tmnxCcIpFltrProtocol specifies the IP protocol to match. If the protocol is changed the protocol specific parameters are reset. For instance if protocol is changed from TCP to UDP, then the objects tmnxCcIpFltrTcpSyn and tmnxCcIpFltrTcpAck will be turned off. The default value of -1 disables matching IP protocol.

OBJECT-TYPE

The value of tmnxCcIpFltrDSCP specifies the DSCP to be matched on the packet.

OBJECT-TYPE

The value of tmnxCcIpFltrSourceIpAddr specifies the IP address to match the source IP address of the packet. This field can only be set if the value of tmnxCcIpFltrDirection is set to egress.

OBJECT-TYPE

The value of tmnxCcIpFltrSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tmnxCcIpFltrSourceIpAddr. The default value of 0 disables matching on the Source IP address. This field can only be set if the value of tmnxCcIpFltrDirection is set to egress.

OBJECT-TYPE

The value of tmnxCcIpFltrDestinationIpAddr specifies the IP address to match the destination IP address of the packet. This field can only be set if the value of tmnxCcIpFltrDirection is set to ingress.

OBJECT-TYPE

The value of tmnxCcIpFltrDestinationIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received destination IP address to match the tmnxCcIpFltrDestinationIpAddr. The default value of 0 disables matching on the destination IP address. This field can only be set if the value of tmnxCcIpFltrDirection is set to ingress.

OBJECT-TYPE

The value of tmnxCcIpFltrSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used as per the description for tmnxCcIpFltrSourcePortOperator.

OBJECT-TYPE

The value of tmnxCcIpFltrSourcePortValue2 specifies the TCP/UDP port value2. The value of this object is used as per the description for tmnxCcIpFltrSourcePortOperator.

OBJECT-TYPE

The value of tmnxCcIpFltrSourcePortOperator specifies the manner in which tmnxCcIpFltrSourcePortValue1 and tmnxCcIpFltrSourcePortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsSourcePortOperator is used as described in TOperator.

OBJECT-TYPE

The value of tmnxCcIpFltrDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used as per the description for tmnxCcIpFltrDestPortOperator.

OBJECT-TYPE

The value of tmnxCcIpFltrDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used as per the description for tmnxCcIpFltrDestPortOperator.

OBJECT-TYPE

The value of tmnxCcIpFltrDestPortOperator specifies the manner in which tmnxCcIpFltrDestPortValue1 and tmnxCcIpFltrDestPortValue2 are to be used. The value of these latter 2 objects and tmnxCcIpFltrDestPortOperator is used as described in TOperator.

OBJECT-TYPE

The value of tmnxCcIpFltrFragment specifies whether this filter applies to fragmented or unfragmented packets only. The default value of 'off(1)' disables fragmentation matching.

OBJECT-TYPE

The value of tmnxCcIpFltrIcmpCode specifies the ICMP code to be matched. The default value of -1 disables ICMP code matching.

OBJECT-TYPE

The value of tmnxCcIpFltrIcmpType specifies the ICMP type to be matched. The default value of -1 disables ICMP type matching.

OBJECT-TYPE

The value of tmnxCcIpFltrIpOptionValue specifies the value the first IP option of the IP header should have. If the value of tmnxCcIpFltrIpOptionMask is not 0 the IP option of the IP header will first be ANDed with the tmnxCcIpFltrIpOptionMask before it is compared with tmnxCcIpFltrIpOptionValue. The default value of 0 disables IP options matching.

OBJECT-TYPE

The value of tmnxCcIpFltrIpOptionMask specifies the value with which the value of the first IP option of the IP header will be ANDed before it is compared with tmnxCcIpFltrIpOptionValue. The default value of 0 disables this behaviour.

OBJECT-TYPE

The value of tmnxCcIpFltrMultipleOption specifies whether the number of IP options in the IP header should be bigger than 1. The default value of 'off(1)' disables checking the number of IP options in the IP header.

OBJECT-TYPE

The value of tmnxCcIpFltrOptionPresent specifies whether there should be any IP options in the IP header. The default value of 'off(1)' disables checking for the presence of IP options in the IP header.

OBJECT-TYPE

The value of tmnxCcIpFltrTcpSyn specifies whether the control bits of the TCP header should contain the SYN bit. The default value of 'off(1)' disables checking for the SYN bit.

OBJECT-TYPE

The value of tmnxCcIpFltrTcpAck specifies whether the control bits of the TCP header should contain the ACK bit. The default value of 'off(1)' disables checking for the ACK bit.

OBJECT-TYPE

The value of this object specifies if the value of tmnxCcIpFltrRedirectURL can be overridden. The value of tmnxCcIpFltrRdirAllwOvrd is relevant only if the value of tmnxCcIpFltrAction is 'httpRedirect'. The system ignores an attempt to set the value of tmnxCcIpFltrRdirAllwOvrd to 'true' if the value of tmnxCcIpFltrAction is not 'httpRedirect'. Furthermore, the system silently resets the value of tmnxCcIpFltrRdirAllwOvrd to 'false' when tmnxCcIpFltrAction is set to any value other than 'httpRedirect'. The value of tmnxCcIpFltrRedirectURL can be overridden by a Diameter Gy Final-Unit-Indication.

OBJECT-TYPE

The value of tmnxCcIpv6FltrTableLastChange indicates the sysUpTime at the time of the last modification of tmnxSubCredCatIpv6FltrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table of all IPv6 filter entries for all credit control (CC) Categories.

OBJECT-TYPE

Information about a particular Credit Control (CC) Category IPv6 Filter entry. Every Credit Control (CC) Category can have zero or more IPv6 Filter entries.

OBJECT-TYPE

The value of tmnxCcIpv6FltrDirection serves as a primary index for the IPv6-filter entry and indicates whether this entry applies to the ingress/egress SAP.

OBJECT-TYPE

The value of tmnxCcIpv6FltrIndex serves as a secondary index for the IPv6-filter entry.

OBJECT-TYPE

The value of tmnxCcIpv6FltrRowStatus controls the creation and deletion of rows in the table. Max. 10 entries can be created for any combination of tmnxSubApCMapName,tmnxSubApCategoryName.

OBJECT-TYPE

The value of tmnxCcIpv6FltrLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

OBJECT-TYPE

The value of tmnxCcIpv6FltrDescription specifies the user-provided description for this filter entry.

OBJECT-TYPE

The value of tmnxCcIpv6FltrAction specifies the action to take for packets that match this filter entry. The default value of 'drop(1)' will drop all matching packets. The values httpRedirect(4) and nat(5) are currently not supported.

OBJECT-TYPE

The value of tmnxCcIpv6FltrRedirectURL specifies the URL to redirect to, when the value of tmnxCcIpv6FltrAction is 'httpRedirect(4)'. However, currently this field is disabled.

OBJECT-TYPE

The value of tmnxCcIpv6FltrNextHeader specifies the IPv6 next header to match. If the value is changed the next header specific parameters are reset. For instance if value is changed from TCP to UDP, then the objects tmnxCcIpv6FltrTcpSyn and tmnxCcIpv6FltrTcpAck will be turned off. The default value of -1 disables matching IPv6 next header. Currently this field is not supported.

OBJECT-TYPE

The value of tmnxCcIpv6FltrDSCP specifies the DSCP to be matched on the packet.

OBJECT-TYPE

The value of tmnxCcIpv6FltrSourceIpAddr specifies the IP address to match the source IP address of the packet. This field can only be set if the value of tmnxCcIpv6FltrDirection is set to egress.

OBJECT-TYPE

The value of tmnxCcIpv6FltrSourceIpMask specifies the IP Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received source IP address to match the tmnxCcIpv6FltrSourceIpAddr. The default value of 0 disables matching on the Source IP address. This field can only be set if the value of tmnxCcIpv6FltrDirection is set to egress.

OBJECT-TYPE

The value of tmnxCcIpv6FltrDestinationIpAddr specifies the IP address to match the destination IP address of the packet. This field can only be set if the value of tmnxCcIpv6FltrDirection is set to ingress.

OBJECT-TYPE

The value of tmnxCcIpv6FltrDestinationIpMask specifies the IP Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received destination IP address to match the tmnxCcIpv6FltrDestinationIpAddr. The default value of 0 disables matching on the destination IP address. This field can only be set if the value of tmnxCcIpv6FltrDirection is set to ingress.

OBJECT-TYPE

The value of tmnxCcIpv6FltrSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used as per the description for tmnxCcIpv6FltrSourcePortOperator.

OBJECT-TYPE

The value of tmnxCcIpv6FltrSourcePortValue2 specifies the TCP/UDP port value2. The value of this object is used as per the description for tmnxCcIpv6FltrSourcePortOperator.

OBJECT-TYPE

The value of tmnxCcIpv6FltrSourcePortOperator specifies the manner in which tmnxCcIpv6FltrSourcePortValue1 and tmnxCcIpv6FltrSourcePortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsSourcePortOperator is used as described in TOperator.

OBJECT-TYPE

The value of tmnxCcIpv6FltrDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used as per the description for tmnxCcIpv6FltrDestPortOperator.

OBJECT-TYPE

The value of tmnxCcIpv6FltrDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used as per the description for tmnxCcIpv6FltrDestPortOperator.

OBJECT-TYPE

The value of tmnxCcIpv6FltrDestPortOperator specifies the manner in which tmnxCcIpv6FltrDestPortValue1 and tmnxCcIpv6FltrDestPortValue2 are to be used. The value of these latter 2 objects and tmnxCcIpv6FltrDestPortOperator is used as described in TOperator.

OBJECT-TYPE

The value of tmnxCcIpv6FltrIcmpCode specifies the ICMP code to be matched. The default value of -1 disables ICMP code matching.

OBJECT-TYPE

The value of tmnxCcIpv6FltrIcmpType specifies the ICMP type to be matched. The default value of -1 disables ICMP type matching.

OBJECT-TYPE

The value of tmnxCcIpv6FltrTcpSyn specifies whether the control bits of the TCP header should contain the SYN bit. The default value of 'off(1)' disables checking for the SYN bit.

OBJECT-TYPE

The value of tmnxCcIpv6FltrTcpAck specifies whether the control bits of the TCP header should contain the ACK bit. The default value of 'off(1)' disables checking for the ACK bit.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRATableLastChange indicates the sysUpTime at the time of the last modification of tmnxSubV6GrpIfRATable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table configuring Router Advertisements for Neighbor Discovery in IPv6. Applies to IES and VPRN Group Interfaces. A row is automatically created in tmnxSubV6GrpIfRATable for each entry in iesIfTable where the value of the object iesIfType equals 'group (3)'.

OBJECT-TYPE

Information about the Router Advertisement configuration for Neighbor Discovery in IPv6 for a particular IES or VPRN Group Interface.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRALastChanged indicates the sysUpTime when an object in this table row was last modified. A Value 0 means that no change was made to this row since the box was last initialized.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAAdminState specifies the desired administrative state of the IPv6 Router Advertisements.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRACurHopLimit specifies the default value to be placed in the current hop limit field in router advertisements sent from this interface.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAManagedCfg specifies a 1 (true) or 0 (false) value to be placed into the 'managed address configuration' flag field in router advertisements sent from this interface.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAMaxInterval specifies the maximum time allowed between sending unsolicited router advertisements from this interface. The value of tmnxSubV6GrpIfRAMaxInterval shall not be smaller than the value of tmnxSubV6GrpIfRAMinInterval.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAMinInterval specifies the minimum time allowed between sending unsolicited router advertisements from this interface. The value of tmnxSubV6GrpIfRAMinInterval shall not be greater than the value of tmnxSubV6GrpIfRAMaxInterval.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRALinkMTU specifies the value to be placed in link MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAOtherCfg specifies a 1 (true) or 0 (false) value to be placed into the 'other stateful configuration' flag field in router advertisements sent from this interface.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAPfxOptAutonomous specifies a true or false value that determines whether the prefix can be used for stateless address autoconfiguration.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAPfxOptPrefLtime specifies the remaining time for this prefix to be preferred, thus time until deprecation. A value of 0xFFFFFFFF represents infinity.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAPfxOptValidLtime specifies the remaining time for this prefix to be valid for the purpose of on-link determination. A value of 0xFFFFFFFF represents infinity.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAReachableTime specifies the value to be placed in the reachable time field in router advertisement messages sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for reachable time.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRARetransmitTime specifies the value to be placed in the retransmit timer field in router advertisements sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for retransmit time.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRARouterLifetime specifies the value to be placed in the router lifetime field of router advertisements sent from this interface. A value of zero indicates that the router is not to be used as a default router.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRADnsOptInclDns specifies whether The RDNSS server option '25' is included in the router advertisements sent from this interface.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRADnsOptRdnssLtime specifies the maximum time in seconds over which the RDNSS address in the RDNSS server option '25' is valid. A value of '-1' indicates that the lifetime is set to infinite.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAForceMcast specifies the protocols for which multicast will be forced.

OBJECT-TYPE

The value of tmnxSubV6GrpIfRAPfxOptOnLink specifies whether the prefix will be assigned to an interface on the specified link.

OBJECT-TYPE

The value of tmnxSLAIngPlcrOverrideTblLstChng indicates the sysUpTime at the time of the last modification of tmnxSLAIngPolicerOverrideTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The tmnxSLAIngPolicerOverrideTable allows overriding of ingress QoS policy policer parameters on a per SLA profile basis.

OBJECT-TYPE

Each entry of the tmnxSLAIngPolicerOverrideTable describes policer parameters which override the corresponding template policer parameters from the specified ingress QoS policy. Rows can be created and deleted by the operator (tmnxSLAIngPolicerOvrRowStatus). Rows can only be created for policers that exist in table TIMETRA-QOS-MIB::tSapIngPolicerTable.

OBJECT-TYPE

The value of tmnxSLAIngPolicerOvrRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSLAIngPolicerOvrLastMgmtChg indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSLAIngPolicerOvrPIR specifies the PIR rate in kbps allowed for this policer.

OBJECT-TYPE

The value of tmnxSLAIngPolicerOvrCIR specifies the CIR rate in kbps allowed for this policer.

OBJECT-TYPE

The value of tmnxSLAIngPolicerOvrMBS specifies the maximum amount of buffer space (in bytes) allowed for the policer.

OBJECT-TYPE

The value of tmnxSLAIngPolicerOvrCBS specifies the amount of reserved buffer space (in bytes) for the policer.

OBJECT-TYPE

The value of tmnxSLAIngPolicerOvrPktOffset specifies the packet byte offset for addition of policing information for the policer.

OBJECT-TYPE

The value of tmnxSLAIngPolicerOvrStatMode specifies the mode of statistics collected for the policer.

OBJECT-TYPE

The value of tmnxSLAEgrPlcrOverrideTblLstChng indicates the sysUpTime at the time of the last modification of tmnxSLAIngPolicerOverrideTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The tmnxSLAEgrPolicerOverrideTable allows overriding of egress QoS policy policer parameters on a per SLA profile basis.

OBJECT-TYPE

Each entry of the tmnxSLAEgrPolicerOverrideTable describes policer parameters which override the corresponding template policer parameters from the specified egress QoS policy. Rows can be created and deleted by the operator (tmnxSLAEgrPolicerOvrRowStatus). Rows can only be created for policers that exist in table TIMETRA-QOS-MIB::tSapEgrPolicerTable.

OBJECT-TYPE

The value of tmnxSLAEgrPolicerOvrRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of tmnxSLAEgrPolicerOvrLastMgmtChg indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tmnxSLAEgrPolicerOvrPIR specifies the PIR rate in kbps allowed for this policer.