MIBs Depot

TIMETRA-MCAST-PATH-MGMT-MIB

Registered at
1.3.6.1.4.1.6527.1.1.3.54
1.3.6.1.4.1.6527.3.1.1.54
1.3.6.1.4.1.6527.3.1.2.54
1.3.6.1.4.1.6527.3.1.3.54
Last updated
2011-02-01 00:00
Organization
Alcatel-Lucent
Revisions
1911-02-01 00:00, 1909-02-28 00:00, 1908-07-01 00:00, 1908-01-01 00:00
Namespace
nokia
Source file
TIMETRA-MCAST-PATH-MGMT-MIB
Digest
sha256:64e96edc19d0451eaaaa6d72b0e9a7366d587267f6fd195bf00b0831ea82f684

Description

This is the SNMP MIB module for ingress multicast path management policy on Alcatel-Lucent SROS equipment. Copyright 2008-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.

Contact

Alcatel-Lucent SROS Support Web: http://support.alcatel-lucent.com

Imports

FromSymbols
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue
TIMETRA-CHASSIS-MIBTmnxChassisIndex, TmnxSlotNum, tmnxCardSlotNum, tmnxChassisIndex, tmnxMDASlotNum
TIMETRA-GLOBAL-MIBtimetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs
TIMETRA-TC-MIBTItemDescription, TNamedItem, TNamedItemOrEmpty, TmnxAdminState, TmnxEnabledDisabled, TmnxEnabledDisabledOrInherit, TmnxVdoAnalyzerAlarm, TmnxVdoFccServerMode, TmnxVdoGrpId, TmnxVdoGrpIdOrInherit, TmnxVdoPortNumber
TIMETRA-VRTR-MIBvRtrID

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-TC-MIB
IANA-RTPROTO-MIB
IANAifType-MIB
IEEE8021-PAE-MIB
IF-MIB
INET-ADDRESS-MIB
IP-FORWARD-MIB
IP-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TIMETRA-CHASSIS-MIB
TIMETRA-FILTER-MIB
TIMETRA-GLOBAL-MIB
TIMETRA-MCAST-PATH-MGMT-MIB
TIMETRA-PORT-MIB
TIMETRA-QOS-MIB
TIMETRA-SAP-MIB
TIMETRA-SERV-MIB
TIMETRA-TC-MIB
TIMETRA-VRTR-MIB

Textual conventions

NameOIDSyntaxAccessStatus
TmnxMcPathBwActivityTc
TEXTUAL-CONVENTION
The value TmnxMcPathBwActivityTc data type is an enumerated integer that describes the values used to define how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel.
current
TmnxMcPathChlSfPathTypeTc
TEXTUAL-CONVENTION
The value TmnxMcPathChlSfPathTypeTc data type is an enumerated integer that describes the values used to identify the type of ingress switch fabric multicast path.
current
TmnxMcPathKeepAliveOverrideTimer
TEXTUAL-CONVENTION
The TmnxMcPathKeepAliveOverrideTimer data type describes the time, in seconds, used to override the PIM instance Keep Alive Timer.
current
TmnxMcPathRtrType
TEXTUAL-CONVENTION
The value TmnxMcPathRtrType data type is an enumerated integer that describes the type of virtual router.
current
TmnxMcPathVdoBufferSize
TEXTUAL-CONVENTION
The TmnxMcPathVdoBufferSize describes the buffer size that stores the number of milliseconds worth of channel packets for the Retransmission (RT) server.
current
TmnxMcPathVdoBwLimit
TEXTUAL-CONVENTION
The TmnxMcPathVdoBwLimit data type describes the per-subscriber egress bandwidth limit in kilobits per second (kbps) for the combined Retransmission (RT) and Fast Channel Change (FCC). If the bandwidth for a request exceeds the bandwidth limit, the request is logged and dropped.
current
TmnxMcPathVdoChlType
TEXTUAL-CONVENTION
The TmnxMcPathVdoChlType data type is an enumerated integer that describes the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP).
current
TmnxMcPathVdoChlTypeOrInherit
TEXTUAL-CONVENTION
The TmnxMcPathVdoChlTypeOrInherit data type is an enumerated integer that describes the video channel type. It identifies whether the video channel type is High Definition (HD), Standard Definition (SD), Picture-in-Picture (PIP) or inherited from another object that is usually in another mib table.
current
TmnxMcPathVdoFccMinDuration
TEXTUAL-CONVENTION
The TmnxMcPathVdoFccMinDuration data type describes the time duration, in milliseconds, of the Fast Channel Change (FCC) burst.
current
TmnxMcPathVdoFccMinDurationOrZero
TEXTUAL-CONVENTION
The TmnxMcPathVdoFccMinDurationOrZero data type describes the time duration, in milliseconds, of the Fast Channel Change (FCC) burst.
current
TmnxMcPathVdoPayloadType
TEXTUAL-CONVENTION
The TmnxMcPathVdoPayloadType data type describes the format to be used by Retransmission (RT) server to send retransmission packets. The value '33' indicates that the frames will be sent as originally received. The default value '99' indicates that the frames will be sent in the RFC 4588 format. A value between 96 and 127 indicates the dynamic payload type value (as per RFC 3551) to be used for RFC 4588 formatted retransmission packets.
current
TmnxMcPathVdoReorderAudio
TEXTUAL-CONVENTION
The TmnxMcPathVdoReorderAudio data type describes the time, in milliseconds, by which the audio packets are reordered in the ad stream.
current

Objects

NameOIDSyntaxAccessStatus
tmnxMcPathConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.1.54
tmnxMcPathCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.1.54.1
tmnxMcPathGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.1.54.2
tmnxMcPathObjs
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.2.54
tmnxMcPathGlobalObjs
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.2.54.1
tmnxMcPathBwPlcyTableLastChanged
OBJECT-TYPE
The value of tmnxMcPathBwPlcyTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathBwPlcyTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.1TimeStampread-onlycurrent
tmnxMcPathPlcyTableLastChanged
OBJECT-TYPE
The value of tmnxMcPathPlcyTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathPlcyTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.2TimeStampread-onlycurrent
tmnxMcPathBdlTableLastChanged
OBJECT-TYPE
The value of tmnxMcPathBdlTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathBdlTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.3TimeStampread-onlycurrent
tmnxMcPathBdlChlTblLastChanged
OBJECT-TYPE
The value of tmnxMcPathBdlChlTblLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathBwPlcyTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.4TimeStampread-onlycurrent
tmnxMcPathChlSrcTableLastChanged
OBJECT-TYPE
The value of tmnxMcPathChlSrcTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathChlSrcTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.5TimeStampread-onlycurrent
tmnxMcPathChassisLevelInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.2.54.1.6
tmnxMcPathChassisPlaneLimit
OBJECT-TYPE
The value of tmnxMcPathChassisPlaneLimit specifies total multicast bandwidth for the chassis forwarding plane. This object was deprecated in the 10.0 release.
1.3.6.1.4.1.6527.3.1.2.54.1.6.1Unsigned32read-writecurrent
tmnxMcPathChassisSecPlaneLimit
OBJECT-TYPE
The value of tmnxMcPathChassisSecPlaneLimit specifies multicast bandwidth for secondary paths on the chassis forwarding plane. The value must be less than tmnxMcPathChassisPlaneLimit. This object was deprecated in the 10.0 release.
1.3.6.1.4.1.6527.3.1.2.54.1.6.2Unsigned32read-writecurrent
tmnxMcPathChassisDualPlaneLimit
OBJECT-TYPE
The value of tmnxMcPathChassisDualPlaneLimit specifies total multicast bandwidth for the chassis forwarding plane in dual-sfm mode. This object was deprecated in the 10.0 release.
1.3.6.1.4.1.6527.3.1.2.54.1.6.3Unsigned32read-writecurrent
tmnxMcPathChassisDualSecPlaneLmt
OBJECT-TYPE
The value of tmnxMcPathChassisDualSecPlaneLmt specifies bandwidth for secondary paths on the chassis forwarding plane in dual-sfm mode. The value must be less than tmnxMcPathChassisDualPlaneLimit. This object was deprecated in the 10.0 release.
1.3.6.1.4.1.6527.3.1.2.54.1.6.4Unsigned32read-writecurrent
tmnxMcPathChassisMmrpAdminMode
OBJECT-TYPE
The value of tmnxMcPathChassisMmrpAdminMode specifies that Ingress Multicast Path Management (IMPM) does not monitor PIM and IGMP trafic. It monitors only Multiple MAC Registration Protocol (MMRP) trafic. The flag setting can be changed at anytime. The new setting will take effect after reboot or reset of the system.
1.3.6.1.4.1.6527.3.1.2.54.1.6.5TruthValueread-writecurrent
tmnxMcPathChassisMmrpOperMode
OBJECT-TYPE
The value of tmnxMcPathChassisMmrpOperMode indicates that Ingress Multicast Path Management (IMPM) does not monitor PIM and IGMP trafic. It monitors only Multiple MAC Registration Protocol (MMRP) trafic. Changing the value of tmnxMcPathChassisMmrpAdminMode will result in tmnxMcPathChassisMmrpAdminMode indicating the new mode while tmnxMcPathChassisMmrpOperMode indicates previous mode until the configuration is saved and the system is rebooted. After the reboot, both tmnxMcPathChassisMmrpAdminMode and tmnxMcPathChassisMmrpOperMode will indicate the new mode.
1.3.6.1.4.1.6527.3.1.2.54.1.6.6TruthValueread-onlycurrent
tmnxMcPathChassisRRInactiveRec
OBJECT-TYPE
The value of tmnxMcPathChassisRRInactiveRec specifies whether initially inactive multicast records use the IOM default secondary multicast path or not. If the value of tmnxMcPathChassisRRInactiveRec is 'true' the system redistributes newly populated inactive records among all available IOM multicast paths and multicast switch fabric planes. If the value of tmnxMcPathChassisRRInactiveRec is 'false' the system continues to set all initially inactive multicast records to use the IOM default secondary multicast path.
1.3.6.1.4.1.6527.3.1.2.54.1.6.7TruthValueread-writecurrent
tmnxMcPathChassisPlnLimTotal
OBJECT-TYPE
The value of tmnxMcPathChassisPlnLimTotal specifies the total bandwidth of the chassis forwarding plane. A value of 0 indicates the system will auto-detect the applicable bandwidth. The default value is 0 when removable switch-fabric is supported and 2000 otherwise.
1.3.6.1.4.1.6527.3.1.2.54.1.6.8Unsigned32 (0 | 2000 | 4000 | 5250)read-writecurrent
tmnxMcPathChassisPlnLimDynTotal
OBJECT-TYPE
The value of tmnxMcPathChassisPlnLimDynTotal indicates the total bandwidth of the chassis forwarding plane that is currently in use.
1.3.6.1.4.1.6527.3.1.2.54.1.6.9Unsigned32 (2000 | 4000)read-onlycurrent
tmnxMcPathChassisPlnLimPriCap
OBJECT-TYPE
The value of tmnxMcPathChassisPlnLimPriCap specifies the part of the total chassis forwarding bandwidth that can be used for multicast when not all switch cards are functional. The default value is 8750 when removable switch-fabric is supported and 10000 otherwise.
1.3.6.1.4.1.6527.3.1.2.54.1.6.10Unsigned32 (1..10000)read-writecurrent
tmnxMcPathChassisPlnLimSecCap
OBJECT-TYPE
The value of tmnxMcPathChassisPlnLimSecCap specifies the part of the total chassis forwarding bandwidth that can be used for multicast secondary paths when not all switch cards are functional. The value must be less than or equal to the value of tmnxMcPathChassisPlnLimPriCap. The default value is 8750 when removable switch-fabric is supported and 9000 otherwise.
1.3.6.1.4.1.6527.3.1.2.54.1.6.11Unsigned32 (1..10000)read-writecurrent
tmnxMcPathChassisPlnLimPriCapRed
OBJECT-TYPE
The value of tmnxMcPathChassisPlnLimPriCapRed specifies the part of the total chassis forwarding bandwidth that can be used for multicast when all switch cards are functional. The default value is 8750 when removable switch-fabric is supported and 10000 otherwise.
1.3.6.1.4.1.6527.3.1.2.54.1.6.12Unsigned32 (1..10000)read-writecurrent
tmnxMcPathChassisPlnLimSecCapRed
OBJECT-TYPE
The value of tmnxMcPathChassisPlnLimSecCapRed specifies the part of the total chassis forwarding bandwidth that can be used for multicast secondary paths when all switch cards are functional. The value must be less than or equal to the value of tmnxMcPathChassisPlnLimPriCapRed. The default value is 8750 when removable switch-fabric is supported and 9000 otherwise.
1.3.6.1.4.1.6527.3.1.2.54.1.6.13Unsigned32 (1..10000)read-writecurrent
tmnxMcPathVdoPlcyTblLastChanged
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyTblLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathVdoPlcyTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.7TimeStampread-onlycurrent
tmnxMcPathBdlExtTableLastChgd
OBJECT-TYPE
The value of tmnxMcPathBdlExtTableLastChgd indicates the sysUpTime at the time of the last modification to tmnxMcPathBdlExtTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.8TimeStampread-onlycurrent
tmnxMcPathBdlChlExtTableLastChgd
OBJECT-TYPE
The value of tmnxMcPathBdlChlExtTableLastChgd indicates the sysUpTime at the time of the last modification to tmnxMcPathBdlChlExtTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.9TimeStampread-onlycurrent
tmnxMcPathChlSrcExtTableLastChgd
OBJECT-TYPE
The value of tmnxMcPathChlSrcExtTableLastChgd indicates the sysUpTime at the time of the last modification to tmnxMcPathBdlExtTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.10TimeStampread-onlycurrent
tmnxMcPathRprtDestTblLastChanged
OBJECT-TYPE
The value of tmnxMcPathRprtDestTblLastChanged indicates the sysUpTime at the time of the last modification to tmnxMcPathRprtDestTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.6527.3.1.2.54.1.11TimeStampread-onlycurrent
tmnxMcPathNotifyObjs
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.2.54.2
tmnxMcPathChlGrpAddrType
OBJECT-TYPE
The value of tmnxMcPathChlGrpAddrType indicates the address type of tmnxMcPathChlGrpAddr.
1.3.6.1.4.1.6527.3.1.2.54.2.1InetAddressTypeaccessible-for-notifycurrent
tmnxMcPathChlGrpAddr
OBJECT-TYPE
The value of tmnxMcPathChlGrpAddr indicates the group address of the multicast channel. Its type is specified by tmnxMcPathChlGrpAddrType.
1.3.6.1.4.1.6527.3.1.2.54.2.2InetAddress (SIZE(4 | 16 | 20))accessible-for-notifycurrent
tmnxMcPathChlSrcAddrType
OBJECT-TYPE
The value of tmnxMcPathChlSrcAddrType indicates the address type of tmnxMcPathChlSrcAddr.
1.3.6.1.4.1.6527.3.1.2.54.2.3InetAddressTypeaccessible-for-notifycurrent
tmnxMcPathChlSrcAddr
OBJECT-TYPE
The value of tmnxMcPathChlSrcAddr indicates the source address of the multicast channel. Its type is specified by tmnxMcPathChlSrcAddrType.
1.3.6.1.4.1.6527.3.1.2.54.2.4InetAddress (SIZE(4 | 16 | 20))accessible-for-notifycurrent
tmnxMcPathChlPathType
OBJECT-TYPE
The value of tmnxMcPathChlPathType indicates the path type for an explicit ingress switch fabric multicast path assigned to a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.2.5TmnxMcPathChlSfPathTypeTcaccessible-for-notifycurrent
tmnxMcPathChassisIndex
OBJECT-TYPE
The unique value which identifies this chassis in the system. The first release of the product only supports a single chassis in the system.
1.3.6.1.4.1.6527.3.1.2.54.2.6TmnxChassisIndexaccessible-for-notifycurrent
tmnxMcPathCardSlotNum
OBJECT-TYPE
The unique value which identifies this IOM slot within a chassis in the system.
1.3.6.1.4.1.6527.3.1.2.54.2.7TmnxSlotNumaccessible-for-notifycurrent
tmnxMcPathMDASlotNum
OBJECT-TYPE
The unique value which identifies this MDA slot within a specific IOM card in the system. Rows with a tmnxMDASlotNum value of zero (0) represent the special case of an IOM card without MDA slots but that instead has its ports directly on the IOM card itself. In that case, there should be only that one row entry in the tmnxMDATable for that IOM card.
1.3.6.1.4.1.6527.3.1.2.54.2.8Unsigned32 (0..16)accessible-for-notifycurrent
tmnxMcPathChlRtrType
OBJECT-TYPE
The value of tmnxMcPathChlRtrType specifies the type of virtual router.
1.3.6.1.4.1.6527.3.1.2.54.2.9TmnxMcPathRtrTypeaccessible-for-notifycurrent
tmnxMcPathBwPlcyTable
OBJECT-TYPE
The tmnxMcPathBwPlcyTable has an entry for each multicast bandwidth policy configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.3not-accessiblecurrent
tmnxMcPathBwPlcyEntry
OBJECT-TYPE
Each row entry represents a particular multicast bandwidth policy. Entries are created/deleted by the user.
1.3.6.1.4.1.6527.3.1.2.54.3.1not-accessiblecurrent
tmnxMcPathBwPlcyName
OBJECT-TYPE
The value of tmnxMcPathBwPlcyName indicates the name of the multicast bandwidth policy.
1.3.6.1.4.1.6527.3.1.2.54.3.1.1TNamedItemnot-accessiblecurrent
tmnxMcPathBwPlcyRowStatus
OBJECT-TYPE
The value of tmnxMcPathBwPlcyRowStatus is used for creation/deletion of multicast bandwidth policies.
1.3.6.1.4.1.6527.3.1.2.54.3.1.2RowStatusread-createcurrent
tmnxMcPathBwPlcyLastChanged
OBJECT-TYPE
The value of tmnxMcPathBwPlcyLastChanged indicates the timestamp of last change to this row in tmnxMcPathBwPlcyTable.
1.3.6.1.4.1.6527.3.1.2.54.3.1.3TimeStampread-onlycurrent
tmnxMcPathBwPlcyDescription
OBJECT-TYPE
The value of tmnxMcPathBwPlcyDescription specifies the textual description of this multicast bandwidth policy.
1.3.6.1.4.1.6527.3.1.2.54.3.1.4TItemDescriptionread-createcurrent
tmnxMcPathBwPlcyFallPercentReset
OBJECT-TYPE
The value of tmnxMcPathBwPlcyFallPercentReset specifies the percentage of bandwidth decrease that must occur to reset the dynamic bandwidth monitoring function for a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.3.1.5Unsigned32 (1..100)read-createcurrent
tmnxMcPathBwPlcyAdminBwThd
OBJECT-TYPE
The value of tmnxMcPathBwPlcyAdminBwThd specifies at which bandwidth rate a multicast channel configured to use an administrative rate will start and stop using that rate as the in-use ingress bandwidth when managing ingress multicast paths.
1.3.6.1.4.1.6527.3.1.2.54.3.1.6Unsigned32 (1..40000000)read-createcurrent
tmnxMcPathBwPlcyMcPoolPercentTot
OBJECT-TYPE
The value of tmnxMcPathBwPlcyMcPoolPercentTot specifies how much of the total ingress buffer pool space for the MDA (Media Dependent Adapter) is dedicated for multicast channels managed by the bandwidth policy.
1.3.6.1.4.1.6527.3.1.2.54.3.1.7Unsigned32 (1..50)read-createcurrent
tmnxMcPathBwPlcyMcPoolResvCbs
OBJECT-TYPE
The value of tmnxMcPathBwPlcyMcPoolResvCbs specifies the percentage of the pool that will be reserved for multicast path queues within their Committed Buffer Size (CBS) threshold.
1.3.6.1.4.1.6527.3.1.2.54.3.1.8Unsigned32 (1..100)read-createcurrent
tmnxMcPathBwPlcyMcPoolSlopePlcy
OBJECT-TYPE
The value of tmnxMcPathBwPlcyMcPoolSlopePlcy specifies the named policy which will be used to configure the WRED (Weighted Random Early Discard) slopes within the multicast pool. Once a slope policy is associated with a buffer pool, it cannot be deleted.
1.3.6.1.4.1.6527.3.1.2.54.3.1.9TNamedItemread-createcurrent
tmnxMcPathBwPlcyPathTable
OBJECT-TYPE
The tmnxMcPathBwPlcyPathTable has an entry for each of the three ingress multicast paths into the switch fabric. An entry is created in this table whenever a entry for a bandwidth policy is created in tmnxMcPathBwPlcyTable.
1.3.6.1.4.1.6527.3.1.2.54.4not-accessiblecurrent
tmnxMcPathBwPlcyPathEntry
OBJECT-TYPE
Each row entry represents a particular ingress multicast path.
1.3.6.1.4.1.6527.3.1.2.54.4.1not-accessiblecurrent
tmnxMcPathBwPlcyPathType
OBJECT-TYPE
The value of tmnxMcPathBwPlcyPathType specifies the type of the path.
1.3.6.1.4.1.6527.3.1.2.54.4.1.1TmnxMcPathChlSfPathTypeTcnot-accessiblecurrent
tmnxMcPathBwPlcyPathLimit
OBJECT-TYPE
The value of tmnxMcPathBwPlcyPathLimit overrides the default path limit for each of the three ingress multicast paths into the switch fabric. The default value of tmnxMcPathBwPlcyPathLimit is the default value of path limit for the primary path. The default value of tmnxMcPathBwPlcyPathLimit for the secondary and ancillary path is 1500 and 5000 respectively.
1.3.6.1.4.1.6527.3.1.2.54.4.1.2Unsigned32 (1..5000)read-createcurrent
tmnxMcPathBwPlcyPathCbs
OBJECT-TYPE
The value of tmnxMcPathBwPlcyPathCbs overrides the default CBS for each individual path's queue. The default value of tmnxMcPathBwPlcyPathCbs is the default value of primary path's queue. The default value of tmnxMcPathBwPlcyPathCbs for the secondary and ancillary path is 3000 and 6500 respectively.
1.3.6.1.4.1.6527.3.1.2.54.4.1.3Unsigned32 (0..10000)read-createcurrent
tmnxMcPathBwPlcyPathMbs
OBJECT-TYPE
The value of tmnxMcPathBwPlcyPathMbs overrides the default Maximum Buffer Size(MBS) for each individual path's queue. The default value of tmnxMcPathBwPlcyPathMbs is the default value of primary path's queue. The default value of tmnxMcPathBwPlcyPathMbs for the secondary and ancillary path is 4000 and 8000 respectively.
1.3.6.1.4.1.6527.3.1.2.54.4.1.4Unsigned32 (0..10000)read-createcurrent
tmnxMcPathBwPlcyPathHighPrio
OBJECT-TYPE
The value of tmnxMcPathBwPlcyPathHighPrio overrides the default percentage value used to determine the low priority MBS value for the queue. By default, 10 percent of the queue depth is reserved for high congestion priority traffic and this default value is same for secondary and ancillary paths also.
1.3.6.1.4.1.6527.3.1.2.54.4.1.5Unsigned32 (0..100)read-createcurrent
tmnxMcPathPlcyTable
OBJECT-TYPE
The tmnxMcPathPlcyTable has an entry for each multicast information policy configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.5not-accessiblecurrent
tmnxMcPathPlcyEntry
OBJECT-TYPE
Each row entry represents a particular multicast information policy. Entries are created/deleted by the user.
1.3.6.1.4.1.6527.3.1.2.54.5.1not-accessiblecurrent
tmnxMcPathPlcyName
OBJECT-TYPE
The value of tmnxMcPathPlcyName indicates the name of the multicast information policy.
1.3.6.1.4.1.6527.3.1.2.54.5.1.1TNamedItemnot-accessiblecurrent
tmnxMcPathPlcyRowStatus
OBJECT-TYPE
The value of tmnxMcPathPlcyRowStatus is used for creation/deletion of multicast information policies.
1.3.6.1.4.1.6527.3.1.2.54.5.1.2RowStatusread-createcurrent
tmnxMcPathPlcyLastChanged
OBJECT-TYPE
The value of tmnxMcPathPlcyLastChanged indicates the timestamp of last change to this row in tmnxMcPathPlcyTable.
1.3.6.1.4.1.6527.3.1.2.54.5.1.3TimeStampread-onlycurrent
tmnxMcPathPlcyDescription
OBJECT-TYPE
The value of tmnxMcPathPlcyDescription specifies the textual description of this multicast information policy.
1.3.6.1.4.1.6527.3.1.2.54.5.1.4TItemDescriptionread-createcurrent
tmnxMcPathBdlTable
OBJECT-TYPE
The tmnxMcPathBdlTable has an entry for each multicast information policy bundle configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.7not-accessiblecurrent
tmnxMcPathBdlEntry
OBJECT-TYPE
Each row entry represents a particular multicast information policy bundle. Entries are created/deleted by the user.
1.3.6.1.4.1.6527.3.1.2.54.7.1not-accessiblecurrent
tmnxMcPathBdlName
OBJECT-TYPE
The value of tmnxMcPathBdlName indicates the name of the multicast information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.7.1.1TNamedItemnot-accessiblecurrent
tmnxMcPathBdlStatus
OBJECT-TYPE
The value of tmnxMcPathBdlStatus along with value of tmnxMcPathPlcyName is used for creation of multicast information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.7.1.2RowStatusread-createcurrent
tmnxMcPathBdlLastChanged
OBJECT-TYPE
The value of tmnxMcPathBdlLastChanged indicates the timestamp of last change to this row in tmnxMcPathBdlTable.
1.3.6.1.4.1.6527.3.1.2.54.7.1.3TimeStampread-onlycurrent
tmnxMcPathBdlDescription
OBJECT-TYPE
The value of tmnxMcPathBdlDescription specifies the textual description of this multicast information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.7.1.4TItemDescriptionread-createcurrent
tmnxMcPathBdlCongPriorityThd
OBJECT-TYPE
The value of tmnxMcPathBdlCongPriorityThd specifies the preference level threshold where records change from low congestion priority to high congestion priority.
1.3.6.1.4.1.6527.3.1.2.54.7.1.5Unsigned32 (0..7)read-createcurrent
tmnxMcPathBdlEcmpOptThd
OBJECT-TYPE
The value of tmnxMcPathBdlEcmpOptThd specifies the preference level threshold where multicast ECMP path management is allowed to dynamically optimize channels based on topology or bandwidth events.
1.3.6.1.4.1.6527.3.1.2.54.7.1.6Unsigned32 (0..7)read-createcurrent
tmnxMcPathBdlDefChlAdminBw
OBJECT-TYPE
The value of tmnxMcPathBdlDefChlAdminBw specifies the multicast channel's administrative bandwidth in kilo-bits per second(kbps).
1.3.6.1.4.1.6527.3.1.2.54.7.1.7Unsigned32 (0..40000000)read-createcurrent
tmnxMcPathBdlDefChlPref
OBJECT-TYPE
The value of tmnxMcPathBdlDefChlPref specifies the relative preference level for multicast channels. The preference of a channel specifies its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
1.3.6.1.4.1.6527.3.1.2.54.7.1.8Unsigned32 (0..7)read-createcurrent
tmnxMcPathBdlDefChlBwActivity
OBJECT-TYPE
The value of tmnxMcPathBdlDefChlBwActivity specifies how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel. This object can have value 'use-admin-bw' only if tmnxMcPathBdlDefChlAdminBw is non-zero.
1.3.6.1.4.1.6527.3.1.2.54.7.1.10TmnxMcPathBwActivityTcread-createcurrent
tmnxMcPathBdlDefChlBwFallDelay
OBJECT-TYPE
The value of tmnxMcPathBdlDefChlBwFallDelay specifies the value the bandwidth manager uses the falling-delay threshold to hold on to the previous highest bandwidth until the delay time has expired while operating in dynamic bandwidth mode. This allows the bandwidth manager to ignore momentary drops in channel bandwidth. This value can only be set if tmnxMcPathBdlDefChlBwActivity is not set to 'none'.
1.3.6.1.4.1.6527.3.1.2.54.7.1.11Unsigned32 (10..3600)read-createcurrent
tmnxMcPathBdlDefChlBwBlackHoleRt
OBJECT-TYPE
The value of tmnxMcPathBdlDefChlBwBlackHoleRt specifies at which current rate a channel should be placed in the black-hole state. This value can only be set if tmnxMcPathBdlDefChlBwActivity is not set to 'none'.
1.3.6.1.4.1.6527.3.1.2.54.7.1.12Unsigned32 (0 | 1..40000000)read-createcurrent
tmnxMcPathBdlDefChlExSfPath
OBJECT-TYPE
The value of tmnxMcPathBdlDefChlExSfPath specifies an explicit ingress switch fabric multicast path assigned to a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.7.1.13TmnxMcPathChlSfPathTypeTcread-createcurrent
tmnxMcPathBdlVdoFCCState
OBJECT-TYPE
The value of tmnxMcPathBdlVdoFCCState indicates whether or not Fast Channel Change (FCC) server is enabled on this multicast information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.7.1.14TmnxEnabledDisabledread-createcurrent
tmnxMcPathBdlVdoRTState
OBJECT-TYPE
The value of tmnxMcPathBdlVdoRTState indicates whether or not Retransmission (RT) Server is enabled on this multicast information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.7.1.15TmnxEnabledDisabledread-createcurrent
tmnxMcPathBdlVdoChlType
OBJECT-TYPE
The value of tmnxMcPathBdlVdoChlType specifies the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP).
1.3.6.1.4.1.6527.3.1.2.54.7.1.16TmnxMcPathVdoChlTyperead-createcurrent
tmnxMcPathBdlVdoRTAddrType
OBJECT-TYPE
The value of tmnxMcPathBdlVdoRTAddrType specifies the address type of tmnxMcPathBdlVdoRTAddress.
1.3.6.1.4.1.6527.3.1.2.54.7.1.17InetAddressTyperead-createcurrent
tmnxMcPathBdlVdoRTAddress
OBJECT-TYPE
The value of tmnxMcPathBdlVdoRTAddress specifies the IP address of the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.7.1.18InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathBdlVdoRTPort
OBJECT-TYPE
The value of tmnxMcPathBdlVdoRTPort specifies the port of the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.7.1.19TmnxVdoPortNumberread-createcurrent
tmnxMcPathBdlVdoRTBufferSize
OBJECT-TYPE
The value of tmnxMcPathBdlVdoRTBufferSize specifies the number of milliseconds worth of channel packets to store for the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.7.1.20TmnxMcPathVdoBufferSizeread-createcurrent
tmnxMcPathBdlVdoLocalRTPort
OBJECT-TYPE
The value of tmnxMcPathBdlVdoLocalRTPort specifies the local port on which Retransmission (RT) requests are received. The value of this object can only be set for the default bundle and will be used by all bundles and channels.
1.3.6.1.4.1.6527.3.1.2.54.7.1.21TmnxVdoPortNumberread-createcurrent
tmnxMcPathBdlVdoLocalFccPort
OBJECT-TYPE
The value of tmnxMcPathBdlVdoLocalFccPort specifies the local port on which Fast Channel Change (FCC) requests are received. The value of this object can only be set for the default bundle and will be used by all bundles and channels.
1.3.6.1.4.1.6527.3.1.2.54.7.1.22TmnxVdoPortNumberread-createcurrent
tmnxMcPathBdlVdoGroupId
OBJECT-TYPE
The value of tmnxMcPathBdlVdoGroupId specifies the row index in the TIMETRA-VIDEO-MIB::tmnxVdoGrpTable for the video group information for this multicast information policy bundle. A value '0' indicates that no video-group is assigned to this multicast information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.7.1.23TmnxVdoGrpIdread-createcurrent
tmnxMcPathBdlTunnelIfLspName
OBJECT-TYPE
The value of tmnxMcPathBdlTunnelIfLspName specifies the name of the RSVP point to multipoint (P2MP) lsp name associated with this tunnel interface.
1.3.6.1.4.1.6527.3.1.2.54.7.1.24TNamedItemOrEmptyread-createcurrent
tmnxMcPathBdlTunIfSdAddrType
OBJECT-TYPE
The value of tmnxMcPathBdlTunIfSdAddrType specifies the type for tmnxMcPathBdlTunIfSdAddr.
1.3.6.1.4.1.6527.3.1.2.54.7.1.25InetAddressTyperead-createcurrent
tmnxMcPathBdlTunIfSdAddr
OBJECT-TYPE
The value of tmnxMcPathBdlTunIfSdAddr specifies the sender IP address of the ingress LER.
1.3.6.1.4.1.6527.3.1.2.54.7.1.26InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathBdlVdoSourcePort
OBJECT-TYPE
The value of tmnxMcPathBdlVdoSourcePort specifies the UDP source port to be used in upstream retransmission (RT) requests. The value of this object can only be set for the default bundle and will be used by all bundles and channels. This object was obsoleted from release 7.0R4.
1.3.6.1.4.1.6527.3.1.2.54.7.1.27TmnxVdoPortNumberread-createobsolete
tmnxMcPathBdlVdoLocalRTState
OBJECT-TYPE
The value of tmnxMcPathBdlVdoLocalRTState specifies whether or not local Retransmission (RT) Server is enabled on this multicast information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.7.1.28TmnxEnabledDisabledread-createcurrent
tmnxMcPathBdlVdoReorderAudio
OBJECT-TYPE
The value of tmnxMcPathBdlVdoReorderAudio specifies the time, in milliseconds, by which the audio packets are reordered in the ad stream. If the value of this object is set to '0', then audio reordering is disabled.
1.3.6.1.4.1.6527.3.1.2.54.7.1.29TmnxMcPathVdoReorderAudioread-createcurrent
tmnxMcPathBdlVdoFccMinDuration
OBJECT-TYPE
The value of tmnxMcPathBdlVdoFccMinDuration specifies the minimum time duration, in milliseconds, of the Fast Channel Change (FCC) burst. The value of this object determines the starting point of the FCC burst. If the current Group of Pictures (GOP) has less than the minimum duration worth of data, FCC burst begins from the previous GOP.
1.3.6.1.4.1.6527.3.1.2.54.7.1.30TmnxMcPathVdoFccMinDurationread-createcurrent
tmnxMcPathBdlKAOverrideTimer
OBJECT-TYPE
The value of tmnxMcPathBdlKAOverrideTimer specifies the time, in seconds, used to override the keep alive timer for all (S,G) entries that fall under this bundle except for (S,G) entries where Keep Alive Timer Override is also configured under channel or source-override. If the value of this object is set to '0', then Keep Alive Timer Override for the bundle is disabled.
1.3.6.1.4.1.6527.3.1.2.54.7.1.31TmnxMcPathKeepAliveOverrideTimerread-createcurrent
tmnxMcPathBdlP2MPId
OBJECT-TYPE
The value of tmnxMcPathBdlP2MPId specifies the identifier of a Point to Multipoint (P2MP) Label Switch Path (LSP) associated with this tunnel interface.
1.3.6.1.4.1.6527.3.1.2.54.7.1.32Unsigned32read-createcurrent
tmnxMcPathBdlVdoAnalyzer
OBJECT-TYPE
The value of tmnxMcPathBdlVdoAnalyzer specifies whether or not the analyzer is enabled for video.
1.3.6.1.4.1.6527.3.1.2.54.7.1.33TruthValueread-createcurrent
tmnxMcPathBdlVdoAnalyzerDesc
OBJECT-TYPE
The value of tmnxMcPathBdlVdoAnalyzerDesc specifies the description for the video analyzer.
1.3.6.1.4.1.6527.3.1.2.54.7.1.34TItemDescriptionread-createcurrent
tmnxMcPathBdlVdoStrSelSrc1Type
OBJECT-TYPE
The value of tmnxMcPathBdlVdoStrSelSrc1Type specifies the address type of tmnxMcPathBdlVdoStrSelSrc1.
1.3.6.1.4.1.6527.3.1.2.54.7.1.35InetAddressTyperead-createcurrent
tmnxMcPathBdlVdoStrSelSrc1
OBJECT-TYPE
The value of tmnxMcPathBdlVdoStrSelSrc1 specifies the address of the first source in stream selection.
1.3.6.1.4.1.6527.3.1.2.54.7.1.36InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathBdlVdoStrSelIntf1
OBJECT-TYPE
The value of tmnxMcPathBdlVdoStrSelIntf1 specifies the interface on which multicast traffic from 'tmnxMcPathBdlVdoStrSelSrc1' arrives.
1.3.6.1.4.1.6527.3.1.2.54.7.1.37TNamedItemOrEmptyread-createcurrent
tmnxMcPathBdlVdoStrSelSrc2Type
OBJECT-TYPE
The value of tmnxMcPathBdlVdoStrSelSrc2Type specifies the address type of tmnxMcPathBdlVdoStrSelSrc2.
1.3.6.1.4.1.6527.3.1.2.54.7.1.38InetAddressTyperead-createcurrent
tmnxMcPathBdlVdoStrSelSrc2
OBJECT-TYPE
The value of tmnxMcPathBdlVdoStrSelSrc2 specifies the address of the second source in stream selection.
1.3.6.1.4.1.6527.3.1.2.54.7.1.39InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathBdlVdoStrSelIntf2
OBJECT-TYPE
The value of tmnxMcPathBdlVdoStrSelIntf2 specifies the interface on which multicast traffic from 'tmnxMcPathBdlVdoStrSelSrc2' arrives.
1.3.6.1.4.1.6527.3.1.2.54.7.1.40TNamedItemOrEmptyread-createcurrent
tmnxMcPathBdlChlTable
OBJECT-TYPE
The tmnxMcPathBdlChlTable has an entry for each multicast information policy bundle channel configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.9not-accessiblecurrent
tmnxMcPathBdlChlEntry
OBJECT-TYPE
Each row entry represents a particular multicast information policy bundle channel. Entries are created/deleted by the user.
1.3.6.1.4.1.6527.3.1.2.54.9.1not-accessiblecurrent
tmnxMcPathBdlChlStartAddrType
OBJECT-TYPE
The value of tmnxMcPathBdlChlStartAddrType indicates the address type of tmnxMcPathBdlChlStartAddr.
1.3.6.1.4.1.6527.3.1.2.54.9.1.1InetAddressTypenot-accessiblecurrent
tmnxMcPathBdlChlStartAddr
OBJECT-TYPE
The value of tmnxMcPathBdlChlStartAddr indicates the start address of the multicast channel. Its type is specified by tmnxMcPathBdlChlStartAddrType.
1.3.6.1.4.1.6527.3.1.2.54.9.1.2InetAddress (SIZE(4 | 16 | 20))not-accessiblecurrent
tmnxMcPathBdlChlEndAddrType
OBJECT-TYPE
The value of tmnxMcPathBdlChlEndAddrType indicates the address type of tmnxMcPathBdlChlEndAddr.
1.3.6.1.4.1.6527.3.1.2.54.9.1.3InetAddressTypenot-accessiblecurrent
tmnxMcPathBdlChlEndAddr
OBJECT-TYPE
The value of tmnxMcPathBdlChlEndAddr indicates the end address of the multicast channel. Its type is specified by tmnxMcPathBdlChlEndAddrType. The value of tmnxMcPathBdlChlEndAddr should always be greater than or equal to tmnxMcPathBdlChlStartAddr.
1.3.6.1.4.1.6527.3.1.2.54.9.1.4InetAddress (SIZE(4 | 16 | 20))not-accessiblecurrent
tmnxMcPathBdlChlRowStatus
OBJECT-TYPE
The value of tmnxMcPathBdlChlRowStatus is used for creation/deletion of multicast channel in an information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.9.1.5RowStatusread-createcurrent
tmnxMcPathBdlChlLastChanged
OBJECT-TYPE
The value of tmnxMcPathBdlChlLastChanged indicates the timestamp of last change to this row in tmnxMcPathBdlChlTable.
1.3.6.1.4.1.6527.3.1.2.54.9.1.6TimeStampread-onlycurrent
tmnxMcPathBdlChlAdminBw
OBJECT-TYPE
The value of tmnxMcPathBdlChlAdminBw specifies the multicast channel's administrative bandwidth in kilo-bits per second(kbps).
1.3.6.1.4.1.6527.3.1.2.54.9.1.7Unsigned32 (0..40000000)read-createcurrent
tmnxMcPathBdlChlPref
OBJECT-TYPE
The value of tmnxMcPathBdlChlPref specifies specifies the relative preference level for multicast channels. tmnxMcPathBdlChlPref specifies its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
1.3.6.1.4.1.6527.3.1.2.54.9.1.8Unsigned32 (0..7)read-createcurrent
tmnxMcPathBdlChlBwActivity
OBJECT-TYPE
The value of tmnxMcPathBdlChlBwActivity specifies how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel. This object can have value 'use-admin-bw' only if tmnxMcPathBdlChlAdminBw is non-zero.
1.3.6.1.4.1.6527.3.1.2.54.9.1.10TmnxMcPathBwActivityTcread-createcurrent
tmnxMcPathBdlChlBwFallDelay
OBJECT-TYPE
The value of tmnxMcPathBdlChlBwFallDelay specifies the value the bandwidth manager uses the falling-delay threshold to hold on to the previous highest bandwidth until the delay time has expired while operating in dynamic bandwidth mode. This allows the bandwidth manager ignore momentary drops in channel bandwidth. This value can only be set if tmnxMcPathBdlChlBwActivity is not set to 'none'. The default value of '0' means that there is no channel override and tmnxMcPathBdlDefChlBwFallDelay should be used.
1.3.6.1.4.1.6527.3.1.2.54.9.1.11Unsigned32 (0 | 10..3600)read-createcurrent
tmnxMcPathBdlChlBwBlackHoleRt
OBJECT-TYPE
The value of tmnxMcPathBdlChlBwBlackHoleRt specifies at which current rate a channel should be placed in the black-hole state. This value can only be set if tmnxMcPathBdlChlBwActivity is not set to 'none'.
1.3.6.1.4.1.6527.3.1.2.54.9.1.12Unsigned32 (0..40000000)read-createcurrent
tmnxMcPathBdlChlExSfPath
OBJECT-TYPE
The value of tmnxMcPathBdlChlExSfPath specifies an explicit ingress switch fabric multicast path assigned to a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.9.1.13TmnxMcPathChlSfPathTypeTcread-createcurrent
tmnxMcPathBdlChlVdoFCCState
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoFCCState specifies the state of Fast Channel Change (FCC) server on this multicast channel. When this object has a value of 'enabled', FCC server is enabled. When its value is 'disabled', FCC server is disabled. When its value is 'inherit', state of FCC server is inherited from the value of tmnxMcPathBdlVdoFCCState which specifies the state of FCC server at the bundle level.
1.3.6.1.4.1.6527.3.1.2.54.9.1.14TmnxEnabledDisabledOrInheritread-createcurrent
tmnxMcPathBdlChlVdoRTState
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoRTState specifies the state of Retransmission (RT) Server on this multicast channel. When this object has a value of 'enabled', RT server is enabled. When its value is 'disabled', RT server is disabled. When its value is 'inherit', state of RT server is inherited from the value of tmnxMcPathBdlVdoRTState which specifies the state of RT server at the bundle level.
1.3.6.1.4.1.6527.3.1.2.54.9.1.15TmnxEnabledDisabledOrInheritread-createcurrent
tmnxMcPathBdlChlVdoChlType
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoChlType specifies the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP). When this object has a value of 'inherit', video channel type is inherited from the value of tmnxMcPathBdlVdoChlType which specifies the video channel type at bundle level.
1.3.6.1.4.1.6527.3.1.2.54.9.1.16TmnxMcPathVdoChlTypeOrInheritread-createcurrent
tmnxMcPathBdlChlVdoRTAddrType
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoRTAddrType specifies the address type of tmnxMcPathBdlChlVdoRTAddress.
1.3.6.1.4.1.6527.3.1.2.54.9.1.17InetAddressTyperead-createcurrent
tmnxMcPathBdlChlVdoRTAddress
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoRTAddress specifies the IP address of the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.9.1.18InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathBdlChlVdoRTPort
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoRTPort specifies the port of the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.9.1.19TmnxVdoPortNumberread-createcurrent
tmnxMcPathBdlChlVdoRTBufferSize
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoRTBufferSize specifies the number of milliseconds worth of channel packets to store for the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.9.1.20TmnxMcPathVdoBufferSizeread-createcurrent
tmnxMcPathBdlChlVdoLocalRTPort
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoLocalRTPort specifies the local port on which Retransmission (RT) requests are received. The value of this object can only be set for the default bundle and will be used by all channels. This object was obsoleted from release 7.0R4.
1.3.6.1.4.1.6527.3.1.2.54.9.1.21TmnxVdoPortNumberread-createobsolete
tmnxMcPathBdlChlVdoLocalFccPort
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoLocalFccPort specifies the local port on which Fast Channel Change (FCC) requests are received. The value of this object can only be set for the default bundle and will be used by all channels. This object was obsoleted from release 7.0R4.
1.3.6.1.4.1.6527.3.1.2.54.9.1.22TmnxVdoPortNumberread-createobsolete
tmnxMcPathBdlChlVdoGroupId
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoGroupId specifies the row index in the TIMETRA-VIDEO-MIB::tmnxVdoGrpTable for the video group information for this multicast information policy bundle. A value '0' indicates that no video-group is assigned to this multicast channel. A value of '-1' indicates that video-group information is inherited from the value of tmnxMcPathBdlVdoGroupId which specifies the video-group information at the bundle level.
1.3.6.1.4.1.6527.3.1.2.54.9.1.23TmnxVdoGrpIdOrInheritread-createcurrent
tmnxMcPathBdlChlTunnelIfLspName
OBJECT-TYPE
The value of tmnxMcPathBdlChlTunnelIfLspName specifies the name of the RSVP point to multipoint (P2MP) lsp name associated with this tunnel interface.
1.3.6.1.4.1.6527.3.1.2.54.9.1.24TNamedItemOrEmptyread-createcurrent
tmnxMcPathBdlChlTunIfSdAddrType
OBJECT-TYPE
The value of tmnxMcPathBdlChlTunIfSdAddrType specifies the type for tmnxMcPathBdlChlTunIfSdAddr.
1.3.6.1.4.1.6527.3.1.2.54.9.1.25InetAddressTyperead-createcurrent
tmnxMcPathBdlChlTunIfSdAddr
OBJECT-TYPE
The value of tmnxMcPathBdlChlTunIfSdAddr specifies the sender address.
1.3.6.1.4.1.6527.3.1.2.54.9.1.26InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathBdlChlVdoLocalRTState
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoLocalRTState specifies the state of local Retransmission (RT) Server on this multicast channel. When this object has a value of 'enabled', local RT server is enabled. When its value is 'disabled', local RT server is disabled. When its value is 'inherit', state of local RT server is inherited from the value of tmnxMcPathBdlVdoLocalRTState which specifies the state of local RT server at the bundle level.
1.3.6.1.4.1.6527.3.1.2.54.9.1.27TmnxEnabledDisabledOrInheritread-createcurrent
tmnxMcPathBdlChlVdoReorderAudio
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoReorderAudio specifies the time, in milliseconds, by which the audio packets are reordered in the ad stream. If the value of this object is set to '0', then audio reordering is disabled.
1.3.6.1.4.1.6527.3.1.2.54.9.1.28TmnxMcPathVdoReorderAudioread-createcurrent
tmnxMcPathBdlChlVdoFccMinDuratn
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoFccMinDuratn specifies the minimum time duration, in milliseconds, of the Fast Channel Change (FCC) burst. The value of this object determines the starting point of the FCC burst. If the current Group of Pictures (GOP) has less than the minimum duration worth of data, FCC burst begins from the previous GOP. When the value of this object is set to '0', then the minimum time duration will be inherited from the value of tmnxMcPathBdlVdoFccMinDuration at the bundle level.
1.3.6.1.4.1.6527.3.1.2.54.9.1.29TmnxMcPathVdoFccMinDurationOrZeroread-createcurrent
tmnxMcPathBdlChlKAOverrideTimer
OBJECT-TYPE
The value of tmnxMcPathBdlChlKAOverrideTimer specifies the time, in seconds, used to override the keep alive timer for all (S,G) entries that fall under a channel (a group or a group range) except for (S,G) entries where Keep Alive Timer Override is also configured under the source-override. If the value of this object is set to '0', then Keep Alive Timer Override for the channel is disabled.
1.3.6.1.4.1.6527.3.1.2.54.9.1.30TmnxMcPathKeepAliveOverrideTimerread-createcurrent
tmnxMcPathBdlChlP2MPId
OBJECT-TYPE
The value of tmnxMcPathBdlChlP2MPId specifies the identifier of a Point to Multipoint (P2MP) Label Switch Path (LSP) associated with this tunnel interface.
1.3.6.1.4.1.6527.3.1.2.54.9.1.31Unsigned32read-createcurrent
tmnxMcPathBdlChlVdoAnalyzer
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoAnalyzer specifies whether or not the analyzer is enabled for video.
1.3.6.1.4.1.6527.3.1.2.54.9.1.32TruthValueread-createcurrent
tmnxMcPathBdlChlVdoAnalyzerDesc
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoAnalyzerDesc specifies the description for the video analyzer.
1.3.6.1.4.1.6527.3.1.2.54.9.1.33TItemDescriptionread-createcurrent
tmnxMcPathBdlChlVdoStrSelSrc1Typ
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoStrSelSrc1Typ specifies the address type of tmnxMcPathBdlChlVdoStrSelSrc1.
1.3.6.1.4.1.6527.3.1.2.54.9.1.34InetAddressTyperead-createcurrent
tmnxMcPathBdlChlVdoStrSelSrc1
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoStrSelSrc1 specifies the address of the first source in stream selection.
1.3.6.1.4.1.6527.3.1.2.54.9.1.35InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathBdlChlVdoStrSelIntf1
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoStrSelIntf1 specifies the interface on which multicast traffic from 'tmnxMcPathBdlChlVdoStrSelSrc1' arrives.
1.3.6.1.4.1.6527.3.1.2.54.9.1.36TNamedItemOrEmptyread-createcurrent
tmnxMcPathBdlChlVdoStrSelSrc2Typ
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoStrSelSrc2Typ specifies the address type of tmnxMcPathBdlChlVdoStrSelSrc2.
1.3.6.1.4.1.6527.3.1.2.54.9.1.37InetAddressTyperead-createcurrent
tmnxMcPathBdlChlVdoStrSelSrc2
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoStrSelSrc2 specifies the address of the second source in stream selection.
1.3.6.1.4.1.6527.3.1.2.54.9.1.38InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathBdlChlVdoStrSelIntf2
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoStrSelIntf2 specifies the interface on which multicast traffic from 'tmnxMcPathBdlChlVdoStrSelSrc2' arrives.
1.3.6.1.4.1.6527.3.1.2.54.9.1.39TNamedItemOrEmptyread-createcurrent
tmnxMcPathChlSrcTable
OBJECT-TYPE
The tmnxMcPathChlSrcTable has an entry for each specified sender override context from the multicast information policy bundle channel range configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.11not-accessiblecurrent
tmnxMcPathChlSrcEntry
OBJECT-TYPE
Each row entry represents a specified sender configured for multicast bundle channel. Entries are created/deleted by the user.
1.3.6.1.4.1.6527.3.1.2.54.11.1not-accessiblecurrent
tmnxMcPathChlSrcSourceAddrType
OBJECT-TYPE
The value of tmnxMcPathChlSrcSourceAddrType indicates the address type of tmnxMcPathChlSrcSourceAddr.
1.3.6.1.4.1.6527.3.1.2.54.11.1.1InetAddressTypenot-accessiblecurrent
tmnxMcPathChlSrcSourceAddr
OBJECT-TYPE
The value of tmnxMcPathChlSrcSourceAddr indicates the start address of the multicast channel. Its type is specified by tmnxMcPathChlSrcSourceAddrType.
1.3.6.1.4.1.6527.3.1.2.54.11.1.2InetAddress (SIZE(4 | 16 | 20))not-accessiblecurrent
tmnxMcPathChlSrcRowStatus
OBJECT-TYPE
The value of tmnxMcPathChlSrcRowStatus is used for creation/deletion of a specified sender override context for the multicast bundle.
1.3.6.1.4.1.6527.3.1.2.54.11.1.3RowStatusread-createcurrent
tmnxMcPathChlSrcLastChanged
OBJECT-TYPE
The value of tmnxMcPathChlSrcLastChanged indicates the timestamp of last change to this row in tmnxMcPathChlSrcTable.
1.3.6.1.4.1.6527.3.1.2.54.11.1.4TimeStampread-onlycurrent
tmnxMcPathChlSrcAdminBw
OBJECT-TYPE
The value of tmnxMcPathChlSrcAdminBw specifies the multicast channel's administrative bandwidth in kilo-bits per second(kbps).
1.3.6.1.4.1.6527.3.1.2.54.11.1.5Unsigned32 (0..40000000)read-createcurrent
tmnxMcPathChlSrcPref
OBJECT-TYPE
The value of tmnxMcPathChlSrcPref specifies the channel's relative preference level for multicast channels. tmnxMcPathBdlChlPref specifies its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
1.3.6.1.4.1.6527.3.1.2.54.11.1.6Unsigned32 (0..7)read-createcurrent
tmnxMcPathChlSrcBwActivity
OBJECT-TYPE
The value of tmnxMcPathChlSrcBwActivity specifies how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel. This object can have value 'use-admin-bw' only if tmnxMcPathChlSrcAdminBw is non-zero.
1.3.6.1.4.1.6527.3.1.2.54.11.1.8TmnxMcPathBwActivityTcread-createcurrent
tmnxMcPathChlSrcBwFallDelay
OBJECT-TYPE
The value of tmnxMcPathChlSrcBwFallDelay specifies the value the bandwidth manager uses the falling-delay threshold to hold on to the previous highest bandwidth until the delay time has expired while operating in dynamic bandwidth mode. This allows the bandwidth manager ignore momentary drops in channel bandwidth. This value can only be set if tmnxMcPathChlSrcBwActivity is not set to 'none'. The default value of '0' means that there is no source override and tmnxMcPathBdlChlBwFallDelay should be used.
1.3.6.1.4.1.6527.3.1.2.54.11.1.9Unsigned32 (0 | 10..3600)read-createcurrent
tmnxMcPathChlSrcBwBlackHoleRt
OBJECT-TYPE
The value of tmnxMcPathChlSrcBwBlackHoleRt specifies at which current rate a channel should be placed in the black-hole state. This value can only be set if tmnxMcPathChlSrcBwActivity is not set to 'none'.
1.3.6.1.4.1.6527.3.1.2.54.11.1.10Unsigned32 (0..40000000)read-createcurrent
tmnxMcPathChlSrcExSfPath
OBJECT-TYPE
The value of tmnxMcPathChlSrcExSfPath specifies an explicit ingress switch fabric multicast path assigned to a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.11.1.11TmnxMcPathChlSfPathTypeTcread-createcurrent
tmnxMcPathChlSrcVdoFCCState
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoFCCState specifies the state of Fast Channel Change (FCC) server for this sender override context. When this object has a value of 'enabled', FCC server is enabled. When its value is 'disabled', FCC server is disabled. When its value is 'inherit', state of FCC server is inherited from the value of tmnxMcPathBdlChlVdoFCCState which specifies the state of FCC server at the channel level.
1.3.6.1.4.1.6527.3.1.2.54.11.1.12TmnxEnabledDisabledOrInheritread-createcurrent
tmnxMcPathChlSrcVdoRTState
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoRTState specifies the state of Retransmission (RT) Server for this sender override context. When this object has a value of 'enabled', RT server is enabled. When its value is 'disabled', RT server is disabled. When its value is 'inherit', state of RT server is inherited from the value of tmnxMcPathBdlChlVdoRTState which specifies the state of RT server at the channel level.
1.3.6.1.4.1.6527.3.1.2.54.11.1.13TmnxEnabledDisabledOrInheritread-createcurrent
tmnxMcPathChlSrcVdoChlType
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoChlType specifies the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP). When this object has a value of 'inherit', video channel type is inherited from the value of tmnxMcPathBdlChlVdoChlType which specifies the video channel type at channel level.
1.3.6.1.4.1.6527.3.1.2.54.11.1.14TmnxMcPathVdoChlTypeOrInheritread-createcurrent
tmnxMcPathChlSrcVdoRTAddrType
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoRTAddrType specifies the address type of tmnxMcPathChlSrcVdoRTAddress.
1.3.6.1.4.1.6527.3.1.2.54.11.1.15InetAddressTyperead-createcurrent
tmnxMcPathChlSrcVdoRTAddress
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoRTAddress specifies the IP address of the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.11.1.16InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathChlSrcVdoRTPort
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoRTPort specifies the port of the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.11.1.17TmnxVdoPortNumberread-createcurrent
tmnxMcPathChlSrcVdoRTBufferSize
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoRTBufferSize specifies the number of milliseconds worth of channel packets to store for the Retransmission (RT) server.
1.3.6.1.4.1.6527.3.1.2.54.11.1.18TmnxMcPathVdoBufferSizeread-createcurrent
tmnxMcPathChlSrcVdoLocalRTPort
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoLocalRTPort specifies the local port on which Retransmission (RT) requests are received. The value of this object can only be set for the default bundle. This object was obsoleted from release 7.0R4.
1.3.6.1.4.1.6527.3.1.2.54.11.1.19TmnxVdoPortNumberread-createobsolete
tmnxMcPathChlSrcVdoLocalFccPort
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoLocalFccPort specifies the local port on which Fast Channel Change (FCC) requests are received. The value of this object can only be set for the default bundle. This object was obsoleted from release 7.0R4.
1.3.6.1.4.1.6527.3.1.2.54.11.1.20TmnxVdoPortNumberread-createobsolete
tmnxMcPathChlSrcVdoGroupId
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoGroupId specifies the row index in the TIMETRA-VIDEO-MIB::tmnxVdoGrpTable for the video group information for this multicast information policy bundle. A value '0' indicates that no video-group is assigned to this multicast channel source. A value of '-1' indicates that video-group information is inherited from the value of tmnxMcPathBdlChlVdoGroupId which specifies the video-group information at the channel level.
1.3.6.1.4.1.6527.3.1.2.54.11.1.21TmnxVdoGrpIdOrInheritread-createcurrent
tmnxMcPathChlSrcTunnelIfLspName
OBJECT-TYPE
The value of tmnxMcPathChlSrcTunnelIfLspName specifies the name of the RSVP point to multipoint (P2MP) lsp name associated with this tunnel interface.
1.3.6.1.4.1.6527.3.1.2.54.11.1.22TNamedItemOrEmptyread-createcurrent
tmnxMcPathChlSrcTunIfSdAddrType
OBJECT-TYPE
The value of tmnxMcPathChlSrcTunIfSdAddrType specifies the type for tmnxMcPathChlSrcTunIfSdAddr.
1.3.6.1.4.1.6527.3.1.2.54.11.1.23InetAddressTyperead-createcurrent
tmnxMcPathChlSrcTunIfSdAddr
OBJECT-TYPE
The value of tmnxMcPathChlSrcTunIfSdAddr specifies the sender address.
1.3.6.1.4.1.6527.3.1.2.54.11.1.24InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathChlSrcVdoLocalRTState
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoLocalRTState specifies the state of local Retransmission (RT) Server for this sender override context. When this object has a value of 'enabled', local RT server is enabled. When its value is 'disabled', local RT server is disabled. When its value is 'inherit', state of local RT server is inherited from the value of tmnxMcPathBdlChlVdoLocalRTState which specifies the state of local RT server at the channel level.
1.3.6.1.4.1.6527.3.1.2.54.11.1.25TmnxEnabledDisabledOrInheritread-createcurrent
tmnxMcPathChlSrcVdoReorderAudio
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoReorderAudio specifies the time, in milliseconds, by which the audio packets are reordered in the ad stream. If the value of this object is set to '0', then audio reordering is disabled.
1.3.6.1.4.1.6527.3.1.2.54.11.1.26TmnxMcPathVdoReorderAudioread-createcurrent
tmnxMcPathChlSrcVdoFccMinDuratn
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoFccMinDuratn specifies the minimum time duration, in milliseconds, of the Fast Channel Change (FCC) burst. The value of this object determines the starting point of the FCC burst. If the current Group of Pictures (GOP) has less than the minimum duration worth of data, FCC burst begins from the previous GOP. When the value of this object is set to '0', then the minimum time duration will be inherited from the value of tmnxMcPathBdlChlVdoFccMinDuratn at the channel level.
1.3.6.1.4.1.6527.3.1.2.54.11.1.27TmnxMcPathVdoFccMinDurationOrZeroread-createcurrent
tmnxMcPathChlSrcKAOverrideTimer
OBJECT-TYPE
The value of tmnxMcPathChlSrcKAOverrideTimer specifies the time, in seconds, used to override the keep alive timer for all (S,G) entries that fall under the source-override in the PIM instance. If the value of this object is set to '0', then Keep Alive Timer Override under source-override is disabled.
1.3.6.1.4.1.6527.3.1.2.54.11.1.28TmnxMcPathKeepAliveOverrideTimerread-createcurrent
tmnxMcPathChlSrcP2MPId
OBJECT-TYPE
The value of tmnxMcPathChlSrcP2MPId specifies the identifier of a Point to Multipoint (P2MP) Label Switch Path (LSP) associated with this tunnel interface.
1.3.6.1.4.1.6527.3.1.2.54.11.1.29Unsigned32read-createcurrent
tmnxMcPathChlSrcVdoAnalyzer
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoAnalyzer specifies whether or not the analyzer is enabled for video.
1.3.6.1.4.1.6527.3.1.2.54.11.1.30TruthValueread-createcurrent
tmnxMcPathChlSrcVdoAnalyzerDesc
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoAnalyzerDesc specifies the description for the video analyzer.
1.3.6.1.4.1.6527.3.1.2.54.11.1.31TItemDescriptionread-createcurrent
tmnxMcPathChlSrcVdoStSeSrc1Type
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoStSeSrc1Type specifies the address type of tmnxMcPathChlSrcVdoStSeSrc1.
1.3.6.1.4.1.6527.3.1.2.54.11.1.32InetAddressTyperead-createcurrent
tmnxMcPathChlSrcVdoStSeSrc1
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoStSeSrc1 specifies the address of the first source in stream selection.
1.3.6.1.4.1.6527.3.1.2.54.11.1.33InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathChlSrcVdoStSeIntf1
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoStSeIntf1 specifies the interface on which multicast traffic from 'tmnxMcPathChlSrcVdoStSeSrc1' arrives.
1.3.6.1.4.1.6527.3.1.2.54.11.1.34TNamedItemOrEmptyread-createcurrent
tmnxMcPathChlSrcVdoStSeSrc2Type
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoStSeSrc2Type specifies the address type of tmnxMcPathChlSrcVdoStSeSrc2.
1.3.6.1.4.1.6527.3.1.2.54.11.1.35InetAddressTyperead-createcurrent
tmnxMcPathChlSrcVdoStSeSrc2
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoStSeSrc2 specifies the address of the second source in stream selection.
1.3.6.1.4.1.6527.3.1.2.54.11.1.36InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathChlSrcVdoStSeIntf2
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoStSeIntf2 specifies the interface on which multicast traffic from 'tmnxMcPathChlSrcVdoStSeSrc2' arrives.
1.3.6.1.4.1.6527.3.1.2.54.11.1.37TNamedItemOrEmptyread-createcurrent
tmnxMcPathOperChlTable
OBJECT-TYPE
The tmnxMcPathOperChlTable listing the (S,G) entries for the multicast information policy bundle channel range on this system.
1.3.6.1.4.1.6527.3.1.2.54.12not-accessiblecurrent
tmnxMcPathOperChlEntry
OBJECT-TYPE
An entry in the tmnxMcPathOperChlTable. This is a read-only table.
1.3.6.1.4.1.6527.3.1.2.54.12.1not-accessiblecurrent
tmnxMcPathOperChlRtrType
OBJECT-TYPE
The value of vRtrType specifies the type of virtual router.
1.3.6.1.4.1.6527.3.1.2.54.12.1.1TmnxMcPathRtrTypenot-accessiblecurrent
tmnxMcPathOperChlGrpAddrType
OBJECT-TYPE
The value of tmnxMcPathOperChlGrpAddrType indicates the address type of tmnxMcPathOperChlGrpAddr.
1.3.6.1.4.1.6527.3.1.2.54.12.1.2InetAddressTypenot-accessiblecurrent
tmnxMcPathOperChlGrpAddr
OBJECT-TYPE
The value of tmnxMcPathOperChlGrpAddr indicates the group address of the multicast channel. Its type is specified by tmnxMcPathOperChlGrpAddrType.
1.3.6.1.4.1.6527.3.1.2.54.12.1.3InetAddress (SIZE(4 | 16 | 20))not-accessiblecurrent
tmnxMcPathOperChlSrcAddrType
OBJECT-TYPE
The value of tmnxMcPathOperChlSrcAddrType indicates the address type of tmnxMcPathOperChlSrcAddr.
1.3.6.1.4.1.6527.3.1.2.54.12.1.4InetAddressTypenot-accessiblecurrent
tmnxMcPathOperChlSrcAddr
OBJECT-TYPE
The value of tmnxMcPathOperChlSrcAddr indicates the source address of the multicast channel. Its type is specified by tmnxMcPathOperChlSrcAddrType.
1.3.6.1.4.1.6527.3.1.2.54.12.1.5InetAddress (SIZE(4 | 16 | 20))not-accessiblecurrent
tmnxMcPathOperChlBandwidth
OBJECT-TYPE
The value of tmnxMcPathOperChlBandwidth indicates the multicast channel's channel's current bandwidth in kilo-bits-per-second.
1.3.6.1.4.1.6527.3.1.2.54.12.1.6Gauge32read-onlycurrent
tmnxMcPathOperChlCurrentPath
OBJECT-TYPE
The value of tmnxMcPathOperChlCurrentPath indicates an explicit ingress switch fabric multicast path assigned to a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.12.1.7TmnxMcPathChlSfPathTypeTcread-onlycurrent
tmnxMcPathOperChlExplicit
OBJECT-TYPE
The value of tmnxMcPathOperChlExplicit indicates how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.12.1.8TruthValueread-onlycurrent
tmnxMcPathOperChlAdminBw
OBJECT-TYPE
The value of tmnxMcPathOperChlAdminBw indicates the multicast channel's administrative bandwidth value taking into account the inheritance of the field i.e. if the administrative bandwidth is not configured at the channel level, it will inherit it from the bundle and thus its operational administrative bandwidth value will be that of the bundle.
1.3.6.1.4.1.6527.3.1.2.54.12.1.9Gauge32read-onlycurrent
tmnxMcPathOperChlPref
OBJECT-TYPE
The value of tmnxMcPathOperChlPref indicates the channel's relative preference level for multicast channels. tmnxMcPathBdlChlPref indicates its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
1.3.6.1.4.1.6527.3.1.2.54.12.1.10Gauge32read-onlycurrent
tmnxMcPathOperChlBwBlackHole
OBJECT-TYPE
The value of tmnxMcPathOperChlBwBlackHole indicates if the source,group (S,G) is in black-hole state.
1.3.6.1.4.1.6527.3.1.2.54.12.1.11TruthValueread-onlycurrent
tmnxMcPathOperChlBwBlackHoleRt
OBJECT-TYPE
The value of tmnxMcPathOperChlBwBlackHoleRt indicates at which current rate a channel should be placed in the black-hole state.
1.3.6.1.4.1.6527.3.1.2.54.12.1.12Gauge32read-onlycurrent
tmnxMcPathOperChlIngLastHighest
OBJECT-TYPE
The value of tmnxMcPathOperChlIngLastHighest indicates the value of the multicast bandwidth that is currently being accounted for the channel on its forwarding path on the MDA. The value is computed based on periodic polling of statistics and represents the last highest bandwidth value since the bandwidth update timer for the channel was (re)started. This field inherits the value of tmnxMcPathOperChlIngSecHighest when the bandwidth update timer expires. This indicates that the bandwidth of the channel is lower than that recorded when the bandwidth update timer was last started. Before the bandwidth update timer expires, if the polled value of the bandwidth is greater than or equal to the current value, the current value is updated to the new value if necessary and the bandwidth update timer is restarted.
1.3.6.1.4.1.6527.3.1.2.54.12.1.13Gauge32read-onlycurrent
tmnxMcPathOperChlIngSecHighest
OBJECT-TYPE
The value of tmnxMcPathOperChlIngSecHighest indicates the value of the second highest multicast bandwidth recorded for the channel on the MDA since the bandwidth update timer for the channel was (re)started. This value is computed based on periodic polling of statistics and is reset to zero everytime the bandwidth update timer for the channel is restarted.
1.3.6.1.4.1.6527.3.1.2.54.12.1.14Gauge32read-onlycurrent
tmnxMcPathOperChlTimeRemaining
OBJECT-TYPE
The value of tmnxMcPathOperChlTimeRemaining indicates the time remaining before the bandwidth update timer for the channel on the MDA expires. The bandwidth update timer determines how often multicast bandwidth is updated for a channel. When the value of this field becomes zero indicating that the bandwidth timer has expired, the bandwidth of the channel represented by the field tmnxMcPathOperChlIngLastHighest is updated to the value of the field tmnxMcPathOperChlIngSecHighest. If the timer is restarted, it indicates that the current bandwidth of the channel has either stayed the same or increased since the last poll.
1.3.6.1.4.1.6527.3.1.2.54.12.1.15Unsigned32read-onlycurrent
tmnxMcPathOperChlCurrentPlane
OBJECT-TYPE
The value of tmnxMcPathOperChlCurrentPlane indicates the plane used to forward this channel.
1.3.6.1.4.1.6527.3.1.2.54.12.1.16Unsigned32read-onlycurrent
tmnxMcPathMdaOperChlTable
OBJECT-TYPE
The tmnxMcPathMdaOperChlTable listing the (S,G) entries for the multicast information policy bundle channel range on this system.
1.3.6.1.4.1.6527.3.1.2.54.13not-accessiblecurrent
tmnxMcPathMdaOperChlEntry
OBJECT-TYPE
An entry in the tmnxMcPathMdaOperChlTable. This is a read-only table.
1.3.6.1.4.1.6527.3.1.2.54.13.1not-accessiblecurrent
tmnxMcPathMdaOperChlRtrType
OBJECT-TYPE
The value of vRtrType specifies the type of virtual router.
1.3.6.1.4.1.6527.3.1.2.54.13.1.1TmnxMcPathRtrTypenot-accessiblecurrent
tmnxMcPathMdaOperChlGrpAddrType
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlGrpAddrType indicates the address type of tmnxMcPathMdaOperChlGrpAddr.
1.3.6.1.4.1.6527.3.1.2.54.13.1.2InetAddressTypenot-accessiblecurrent
tmnxMcPathMdaOperChlGrpAddr
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlGrpAddr indicates the group address of the multicast channel. Its type is specified by tmnxMcPathMdaOperChlGrpAddrType.
1.3.6.1.4.1.6527.3.1.2.54.13.1.3InetAddress (SIZE(4 | 16 | 20))not-accessiblecurrent
tmnxMcPathMdaOperChlSrcAddrType
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlSrcAddrType indicates the address type of tmnxMcPathMdaOperChlSrcAddr.
1.3.6.1.4.1.6527.3.1.2.54.13.1.4InetAddressTypenot-accessiblecurrent
tmnxMcPathMdaOperChlSrcAddr
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlSrcAddr indicates the source address of the multicast channel. Its type is specified by tmnxMcPathMdaOperChlSrcAddrType.
1.3.6.1.4.1.6527.3.1.2.54.13.1.5InetAddress (SIZE(4 | 16 | 20))not-accessiblecurrent
tmnxMcPathMdaOperChlBandwidth
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlBandwidth indicates the multicast channel's current bandwidth in kilo-bits per second(kbps).
1.3.6.1.4.1.6527.3.1.2.54.13.1.6Gauge32read-onlycurrent
tmnxMcPathMdaOperChlCurrentPath
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlCurrentPath indicates an explicit ingress switch fabric multicast path assigned to a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.13.1.7TmnxMcPathChlSfPathTypeTcread-onlycurrent
tmnxMcPathMdaOperChlExplicit
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlExplicit indicates how the multicast ingress path manager determines the amount of bandwidth required by a multicast channel.
1.3.6.1.4.1.6527.3.1.2.54.13.1.8TruthValueread-onlycurrent
tmnxMcPathMdaOperChlAdminBw
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlAdminBw indicates the multicast channel's administrative bandwidth value taking into account the inheritance of the field i.e. if the administrative bandwidth is not configured at the channel level, it will inherit it from the bundle and thus its operational administrative bandwidth value will be that of the bundle.
1.3.6.1.4.1.6527.3.1.2.54.13.1.9Gauge32read-onlycurrent
tmnxMcPathMdaOperChlPref
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlPref indicates the channel's relative preference level for multicast channels. tmnxMcPathBdlChlPref indicates its relative importance over other multicast channels. Eight levels of preference are supported; 0 through 7. Preference value 7 indicates the highest preference level.
1.3.6.1.4.1.6527.3.1.2.54.13.1.10Gauge32read-onlycurrent
tmnxMcPathMdaOperChlBwBlackHole
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlBwBlackHole indicates if the source,group (S,G) is in black-hole state.
1.3.6.1.4.1.6527.3.1.2.54.13.1.11TruthValueread-onlycurrent
tmnxMcPathMdaOperChlBwBlackHoleRt
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlBwBlackHoleRt indicates at which current rate a channel should be placed in the black-hole state.
1.3.6.1.4.1.6527.3.1.2.54.13.1.12Gauge32read-onlycurrent
tmnxMcPathMdaOperChlIngLastHigh
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlIngLastHigh indicates the value of the multicast bandwidth that is currently being accounted for the channel on its forwarding path on the MDA. The value is computed based on periodic polling of statistics and represents the last highest bandwidth value since the bandwidth update timer for the channel was (re)started. This field inherits the value of tmnxMcPathOperChlIngSecHighest when the bandwidth update timer expires. This indicates that the bandwidth of the channel is lower than that recorded when the bandwidth update timer was last started. Before the bandwidth update timer expires, if the polled value of the bandwidth is greater than or equal to the current value, the current value is updated to the new value if necessary and the bandwidth update timer is restarted.
1.3.6.1.4.1.6527.3.1.2.54.13.1.13Gauge32read-onlycurrent
tmnxMcPathMdaOperChlIngSecHigh
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlIngSecHigh indicates the value of the second highest multicast bandwidth recorded for the channel on the MDA since the bandwidth update timer for the channel was (re)started. This value is computed based on periodic polling of statistics and is reset to zero everytime the bandwidth update timer for the channel is restarted.
1.3.6.1.4.1.6527.3.1.2.54.13.1.14Gauge32read-onlycurrent
tmnxMcPathMdaOperChlTimeRemain
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlTimeRemain indicates the time remaining before the bandwidth update timer for the channel on the MDA expires. The bandwidth update timer determines how often multicast bandwidth is updated for a channel. When the value of this field becomes zero indicating that the bandwidth timer has expired, the bandwidth of the channel represented by the field tmnxMcPathOperChlIngLastHighest is updated to the value of the field tmnxMcPathOperChlIngSecHighest. If the timer is restarted, it indicates that the current bandwidth of the channel has either stayed the same or increased since the last poll.
1.3.6.1.4.1.6527.3.1.2.54.13.1.15Unsigned32read-onlycurrent
tmnxMcPathMdaOperChlCurrentPlane
OBJECT-TYPE
The value of tmnxMcPathMdaOperChlCurrentPlane indicates the plane used to forward this channel.
1.3.6.1.4.1.6527.3.1.2.54.13.1.16Unsigned32read-onlycurrent
tmnxMcPathBwPlcyT2PathTable
OBJECT-TYPE
The tmnxMcPathBwPlcyT2PathTable has an entry for the primary and secondary ingress multicast paths. An entry is created in this table whenever an entry for a bandwidth policy is created in the tmnxMcPathBwPlcyTable. This entry is relevant only for IOM3.
1.3.6.1.4.1.6527.3.1.2.54.14not-accessiblecurrent
tmnxMcPathBwPlcyT2PathEntry
OBJECT-TYPE
Each row entry represents a particular ingress multicast path configuration.
1.3.6.1.4.1.6527.3.1.2.54.14.1not-accessiblecurrent
tmnxMcPathBwPlcyT2PathType
OBJECT-TYPE
The value of tmnxMcPathBwPlcyT2PathType specifies the type of the path. Only two types supported for T2-paths - 'primary' and 'secondary'.
1.3.6.1.4.1.6527.3.1.2.54.14.1.1TmnxMcPathChlSfPathTypeTcnot-accessiblecurrent
tmnxMcPathBwPlcyT2PathCbs
OBJECT-TYPE
The value of tmnxMcPathBwPlcyT2PathCbs specifies committed buffer size(CBS). The value of tmnxMcPathBwPlcyT2PathCbs overrides the default CBS for each individual path's queue. The default value of tmnxMcPathBwPlcyT2PathCbs is the default value of primary path's queue. The default value of tmnxMcPathBwPlcyT2PathCbs for the secondary path is 3000.
1.3.6.1.4.1.6527.3.1.2.54.14.1.2Unsigned32 (0..10000)read-createcurrent
tmnxMcPathBwPlcyT2PathMbs
OBJECT-TYPE
The value of tmnxMcPathBwPlcyT2PathMbs specifies Maximum Buffer Size(MBS). The value of tmnxMcPathBwPlcyT2PathMbs overrides the default MBS for each individual path's queue. The default value of tmnxMcPathBwPlcyT2PathMbs is the default value of primary path's queue. The default value of tmnxMcPathBwPlcyT2PathMbs for the secondary path is 4000.
1.3.6.1.4.1.6527.3.1.2.54.14.1.3Unsigned32 (0..10000)read-createcurrent
tmnxMcPathBwPlcyT2PathHighPrio
OBJECT-TYPE
The value of tmnxMcPathBwPlcyT2PathHighPrio specifies percent of queue depth reserved for high congestion priority traffic. The value of tmnxMcPathBwPlcyT2PathHighPrio overrides the default percentage value used to determine the low priority MBS value for the queue. By default, 10 percent of the queue depth is reserved for high congestion priority traffic and this default value is same for secondary paths.
1.3.6.1.4.1.6527.3.1.2.54.14.1.4Unsigned32 (0..100)read-createcurrent
tmnxMcPathBwPlcyT2PathPaths
OBJECT-TYPE
The value of tmnxMcPathBwPlcyT2PathPaths specifies the number of paths for the secondary path index only.
1.3.6.1.4.1.6527.3.1.2.54.14.1.5Unsigned32 (1..15)read-createcurrent
tmnxMcPathBwPlcyT2PathDualPaths
OBJECT-TYPE
The value of tmnxMcPathBwPlcyT2PathDualPaths specifies the number of paths for the secondary path index for dual-sfm mode.
1.3.6.1.4.1.6527.3.1.2.54.14.1.6Unsigned32 (1..15)read-createcurrent
tmnxMcPathBwPlcyT2PathLastChanged
OBJECT-TYPE
The value of tmnxMcPathBwPlcyT2PathLastChanged indicates the timestamp of last change to this row in tmnxMcPathBwPlcyT2PathTable.
1.3.6.1.4.1.6527.3.1.2.54.14.1.7TimeStampread-onlycurrent
tmnxMcPathVdoPlcyTable
OBJECT-TYPE
The tmnxMcPathVdoPlcyTable has an entry for each multicast video policy configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.15not-accessiblecurrent
tmnxMcPathVdoPlcyEntry
OBJECT-TYPE
Each row entry represents a particular multicast video policy. Entries can be created/deleted by the user.
1.3.6.1.4.1.6527.3.1.2.54.15.1not-accessiblecurrent
tmnxMcPathVdoPlcyIfAddrType
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyIfAddrType specifies the address type of tmnxMcPathVdoPlcyIfAddress.
1.3.6.1.4.1.6527.3.1.2.54.15.1.1InetAddressTypenot-accessiblecurrent
tmnxMcPathVdoPlcyIfAddress
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyIfAddress specifies the IP address of the video interface. The IP address of video interface can be configured within the context of a service to which this multicast video policy is assigned. If the IP address does not match the IP address assigned to a video interface, the parameters defined within this context have no effect.
1.3.6.1.4.1.6527.3.1.2.54.15.1.2InetAddress (SIZE(4 | 16))not-accessiblecurrent
tmnxMcPathVdoPlcyChlType
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyChlType specifies the video channel type. It identifies whether the video channel is High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP). A value of 'default' indicates that this is default video policy for High Definition (HD), Standard Definition (SD) or Picture-in-Picture (PIP).
1.3.6.1.4.1.6527.3.1.2.54.15.1.3TmnxMcPathVdoChlTypenot-accessiblecurrent
tmnxMcPathVdoPlcyRowStatus
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyRowStatus specifies the row status of this row. It is used for creation/deletion of multicast video policy.
1.3.6.1.4.1.6527.3.1.2.54.15.1.4RowStatusread-createcurrent
tmnxMcPathVdoPlcyLastChanged
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyLastChanged indicates the timestamp of last change to this row in tmnxMcPathVdoPlcyTable.
1.3.6.1.4.1.6527.3.1.2.54.15.1.5TimeStampread-onlycurrent
tmnxMcPathVdoPlcyLclRTSvrState
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyLclRTSvrState specifies whether or not local Retransmission (RT) server is enabled. It indicates whether to process the Retransmission (RT) requests from the client. The value of tmnxMcPathVdoPlcyLclRTSvrState is only applicable when tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'.
1.3.6.1.4.1.6527.3.1.2.54.15.1.6TruthValueread-createcurrent
tmnxMcPathVdoPlcyRTRate
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyRTRate specifies the rate at which retransmission packets are sent to the client. A default value of '5' indicates that retransmission rate is set to 5% above nominal bandwidth.
1.3.6.1.4.1.6527.3.1.2.54.15.1.7Unsigned32 (1..100)read-createcurrent
tmnxMcPathVdoPlcySubBwLimit
OBJECT-TYPE
The value of tmnxMcPathVdoPlcySubBwLimit specifies the per-subscriber egress bandwidth limit for the combined Retransmission (RT) and Fast Channel Change (FCC). If the bandwidth for a request will exceed the bandwidth limit, the request is logged and dropped. The value of tmnxMcPathVdoPlcySubBwLimit is only applicable when tmnxMcPathVdoPlcyChlType is set to 'default (1)'.
1.3.6.1.4.1.6527.3.1.2.54.15.1.8TmnxMcPathVdoBwLimitread-createcurrent
tmnxMcPathVdoPlcyFCCSvrMode
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyFCCSvrMode specifies the mode of the Fast Channel Change (FCC) server. It indicates how the FCC server will send unicast stream to the client. The value of tmnxMcPathVdoPlcyFCCSvrMode is only applicable when tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'.
1.3.6.1.4.1.6527.3.1.2.54.15.1.9TmnxVdoFccServerModeread-createcurrent
tmnxMcPathVdoPlcyFCCBurst
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyFCCBurst specifies the burst rate at which the Fast Channel Change (FCC) server will send unicast data to the client above the received rate to allow client to catch-up to the multicast stream. The value is only applicable if tmnxMcPathVdoPlcyFCCSvrMode is set to 'burst (1)' or 'hybrid (3)' and tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'. A default value of '25' indicates that FCC burst rate is set to 25% above received rate.
1.3.6.1.4.1.6527.3.1.2.54.15.1.10Unsigned32 (0..600)read-createcurrent
tmnxMcPathVdoPlcyFCCMcHandover
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyFCCMcHandover specifies the rate at which the Fast Channel Change (FCC) server will send unicast data to the client during the handover to the multicast stream. The value of tmnxMcPathVdoPlcyFCCMcHandover is only applicable when tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'. Additionaly, when the value of tmnxMcPathVdoPlcyChlType is 'hd (2)', the maximum value of tmnxMcPathVdoPlcyFCCMcHandover is 100.
1.3.6.1.4.1.6527.3.1.2.54.15.1.11Unsigned32 (0..600)read-createcurrent
tmnxMcPathVdoPlcyFCCDentThd
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyFCCDentThd specifies the dent threshold with which the Fast Channel Change (FCC) server will send unicast data to the client. The value is only applicable if the value of tmnxMcPathVdoPlcyFCCSvrMode is set to 'dent (2)' or 'hybrid (3)' and tmnxMcPathVdoPlcyChlType is set to 'hd (2)', 'sd (3)', or 'pip (4)'.
1.3.6.1.4.1.6527.3.1.2.54.15.1.12Unsigned32 (1..31)read-createcurrent
tmnxMcPathVdoPlcyRTPayloadType
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyRTPayloadType specifies the format to be used by Retransmission (RT) server to send retransmission packets. The default value '99' indicates that the frames will be sent in the RFC 4588 format. A value between 96 and 127 indicates the dynamic payload type value (as per RFC 3551) to be used for RFC 4588 formatted retransmission packets. A value of 33 indicates a mpeg-ts payload. The value of tmnxMcPathVdoPlcyRTPayloadType is only applicable when tmnxMcPathVdoPlcyChlType is set to 'default (1)'.
1.3.6.1.4.1.6527.3.1.2.54.15.1.13TmnxMcPathVdoPayloadTyperead-createcurrent
tmnxMcPathVdoPlcyMaxClntSessions
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyMaxClntSessions specifies the maximum number of RTCP sessions supported per client IP address. The value of tmnxMcPathVdoPlcyMaxClntSessions is only applicable when tmnxMcPathVdoPlcyChlType is set to 'default (1)'.
1.3.6.1.4.1.6527.3.1.2.54.15.1.14Unsigned32 (1..65536)read-createcurrent
tmnxMcPathVdoPlcyMaxIgmpLatency
OBJECT-TYPE
The value of tmnxMcPathVdoPlcyMaxIgmpLatency specifies the maximum duration from the time a client sends an IGMP join to the time it receives the first multicast packet. The value of tmnxMcPathVdoPlcyMaxIgmpLatency is only applicable when tmnxMcPathVdoPlcyChlType is set to 'default (1)'.
1.3.6.1.4.1.6527.3.1.2.54.15.1.15Unsigned32 (10..1000)read-createcurrent
tmnxMcPathBdlExtTable
OBJECT-TYPE
The tmnxMcPathBdlExtTable has an entry for each multicast information policy bundle configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.16not-accessiblecurrent
tmnxMcPathBdlExtEntry
OBJECT-TYPE
A row entry is created or deleted in this table when the corresponding operation on a row is done in tmnxMcPathBdlTable. Entries in tmnxMcPathBdlTable are created or deleted by the user. Each row entry represents a particular multicast information policy bundle.
1.3.6.1.4.1.6527.3.1.2.54.16.1not-accessiblecurrent
tmnxMcPathBdlVdoLastChanged
OBJECT-TYPE
The value of tmnxMcPathBdlVdoLastChanged indicates the timestamp of the last change to this row in tmnxMcPathBdlExtTable.
1.3.6.1.4.1.6527.3.1.2.54.16.1.1TimeStampread-onlycurrent
tmnxMcPathBdlVdoCcError
OBJECT-TYPE
The value of tmnxMcPathBdlVdoCcError specifies whether or not the continuity counter error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.2TruthValueread-createcurrent
tmnxMcPathBdlVdoPatRepError
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPatRepError specifies whether or not PAT (Program Association Table) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.3TruthValueread-createcurrent
tmnxMcPathBdlVdoTncPatRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoTncPatRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PAT repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.16.1.4Unsigned32 (100..800)read-createcurrent
tmnxMcPathBdlVdoQosPatRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoQosPatRep specifies the value of QOS (Quality of Service) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoQosPatRep' must also be greater than the value of 'tmnxMcPathBdlVdoTncPatRep'.
1.3.6.1.4.1.6527.3.1.2.54.16.1.5Unsigned32 (200..900)read-createcurrent
tmnxMcPathBdlVdoPoaPatRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPoaPatRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoPoaPatRep' must also be greater than the value of 'tmnxMcPathBdlVdoQosPatRep'.
1.3.6.1.4.1.6527.3.1.2.54.16.1.6Unsigned32 (300..1000)read-createcurrent
tmnxMcPathBdlVdoPatSyntax
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPatSyntax specifies whether or not PAT syntax error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.7TruthValueread-createcurrent
tmnxMcPathBdlVdoPcrRepError
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPcrRepError specifies whether or not PCR (Program Clock Reference) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.8TruthValueread-createcurrent
tmnxMcPathBdlVdoTncPcrRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoTncPcrRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PCR repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.16.1.9Unsigned32 (100..800)read-createcurrent
tmnxMcPathBdlVdoQosPcrRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoQosPcrRep specifies the value of QOS (Quality of Service) in milli-seconds for PCR repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoQosPcrRep' must also be greater than the value of 'tmnxMcPathBdlVdoTncPcrRep'.
1.3.6.1.4.1.6527.3.1.2.54.16.1.10Unsigned32 (200..900)read-createcurrent
tmnxMcPathBdlVdoPoaPcrRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPoaPcrRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoPoaPcrRep' must also be greater than the value of 'tmnxMcPathBdlVdoQosPcrRep'.
1.3.6.1.4.1.6527.3.1.2.54.16.1.11Unsigned32 (300..1000)read-createcurrent
tmnxMcPathBdlVdoVidPIDAbsent
OBJECT-TYPE
The value of tmnxMcPathBdlVdoVidPIDAbsent specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
1.3.6.1.4.1.6527.3.1.2.54.16.1.12Unsigned32 (0..5000)read-createcurrent
tmnxMcPathBdlVdoPIDPmtUnref
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPIDPmtUnref specifies whether or not unreferenced PID (i.e. PIDs not specified in the PMT) error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.13TruthValueread-createcurrent
tmnxMcPathBdlVdoPmtRepError
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPmtRepError specifies whether or not PMT (Program Map Table) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.14TruthValueread-createcurrent
tmnxMcPathBdlVdoTncPmtRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoTncPmtRep specifies the value of TNC (Tech Non-Conformance) in milli-seconds for PMT repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.16.1.15Unsigned32 (100..4800)read-createcurrent
tmnxMcPathBdlVdoQosPmtRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoQosPmtRep specifies the value of QOS (Quality of Service) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoQosPmtRep' must also be greater than the value of 'tmnxMcPathBdlVdoTncPmtRep'.
1.3.6.1.4.1.6527.3.1.2.54.16.1.16Unsigned32 (200..4900)read-createcurrent
tmnxMcPathBdlVdoPoaPmtRep
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPoaPmtRep specifies the value of POA (Program off Air) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlVdoPoaPmtRep' must also be greater than the value of 'tmnxMcPathBdlVdoQosPmtRep'.
1.3.6.1.4.1.6527.3.1.2.54.16.1.17Unsigned32 (300..5000)read-createcurrent
tmnxMcPathBdlVdoPmtSyntax
OBJECT-TYPE
The value of tmnxMcPathBdlVdoPmtSyntax specifies whether or not PMT syntax error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.18TruthValueread-createcurrent
tmnxMcPathBdlVdoScte35Error
OBJECT-TYPE
The value of tmnxMcPathBdlVdoScte35Error specifies whether or not SCTE35 (Society of Cable Telecommunications Engineers) errors are enabled for the video stream. This object was obsoleted in the 9.0 release.
1.3.6.1.4.1.6527.3.1.2.54.16.1.19TruthValueread-createobsolete
tmnxMcPathBdlVdoTeiError
OBJECT-TYPE
The value of tmnxMcPathBdlVdoTeiError specifies whether or not TEI (Transport Error Indicator) error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.20TruthValueread-createcurrent
tmnxMcPathBdlVdoTsSyncLoss
OBJECT-TYPE
The value of tmnxMcPathBdlVdoTsSyncLoss specifies whether or not sync loss error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.21TruthValueread-createcurrent
tmnxMcPathBdlVdoNonVidPIDAbsent
OBJECT-TYPE
The value of tmnxMcPathBdlVdoNonVidPIDAbsent specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of non-video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
1.3.6.1.4.1.6527.3.1.2.54.16.1.22Unsigned32 (0..5000)read-createcurrent
tmnxMcPathBdlVdoReportAlarm
OBJECT-TYPE
The value of tmnxMcPathBdlVdoReportAlarm specifies the severity of the analyzer state alarm for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.16.1.23TmnxVdoAnalyzerAlarmread-createcurrent
tmnxMcPathBdlChlExtTable
OBJECT-TYPE
The tmnxMcPathBdlChlExtTable has an entry for each multicast information policy bundle configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.17not-accessiblecurrent
tmnxMcPathBdlChlExtEntry
OBJECT-TYPE
A row entry is created or deleted in this table when the corresponding operation on a row is done in tmnxMcPathBdlChlTable. Entries in tmnxMcPathBdlChlTable are created or deleted by the user. Each row entry represents a particular multicast information policy bundle channel.
1.3.6.1.4.1.6527.3.1.2.54.17.1not-accessiblecurrent
tmnxMcPathBdlChlVdoLastChanged
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoLastChanged indicates the timestamp of the last change to this row in tmnxMcPathBdlChlExtTable.
1.3.6.1.4.1.6527.3.1.2.54.17.1.1TimeStampread-onlycurrent
tmnxMcPathBdlChlVdoCcError
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoCcError specifies whether or not the continuity counter error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.2TruthValueread-createcurrent
tmnxMcPathBdlChlVdoPatRepError
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPatRepError specifies whether or not PAT (Program Association Table) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.3TruthValueread-createcurrent
tmnxMcPathBdlChlVdoTncPatRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoTncPatRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PAT repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.17.1.4Unsigned32 (100..800)read-createcurrent
tmnxMcPathBdlChlVdoQosPatRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoQosPatRep specifies the value of QOS (Quality of Service) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoQosPatRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoTncPatRep'.
1.3.6.1.4.1.6527.3.1.2.54.17.1.5Unsigned32 (200..900)read-createcurrent
tmnxMcPathBdlChlVdoPoaPatRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPoaPatRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoPoaPatRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoQosPatRep'.
1.3.6.1.4.1.6527.3.1.2.54.17.1.6Unsigned32 (300..1000)read-createcurrent
tmnxMcPathBdlChlVdoPatSyntax
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPatSyntax specifies whether or not PAT syntax error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.7TruthValueread-createcurrent
tmnxMcPathBdlChlVdoPcrRepError
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPcrRepError specifies whether or not PCR (Program Clock Reference) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.8TruthValueread-createcurrent
tmnxMcPathBdlChlVdoTncPcrRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoTncPcrRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PCR repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.17.1.9Unsigned32 (100..800)read-createcurrent
tmnxMcPathBdlChlVdoQosPcrRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoQosPcrRep specifies the value of QOS (Quality of Service) in milli-seconds for PCR repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoQosPcrRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoTncPcrRep'.
1.3.6.1.4.1.6527.3.1.2.54.17.1.10Unsigned32 (200..900)read-createcurrent
tmnxMcPathBdlChlVdoPoaPcrRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPoaPcrRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoPoaPcrRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoQosPcrRep'.
1.3.6.1.4.1.6527.3.1.2.54.17.1.11Unsigned32 (300..1000)read-createcurrent
tmnxMcPathBdlChlVdoVidPIDAbs
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoVidPIDAbs specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
1.3.6.1.4.1.6527.3.1.2.54.17.1.12Unsigned32 (0..5000)read-createcurrent
tmnxMcPathBdlChlVdoPIDPmtUnref
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPIDPmtUnref specifies whether or not unreferenced PID (i.e. PIDs not specified in the PMT) error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.13TruthValueread-createcurrent
tmnxMcPathBdlChlVdoPmtRepError
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPmtRepError specifies whether or not PMT (Program Map Table) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.14TruthValueread-createcurrent
tmnxMcPathBdlChlVdoTncPmtRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoTncPmtRep specifies the value of TNC (Tech Non-Conformance) in milli-seconds for PMT repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.17.1.15Unsigned32 (100..4800)read-createcurrent
tmnxMcPathBdlChlVdoQosPmtRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoQosPmtRep specifies the value of QOS (Quality of Service) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoQosPmtRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoTncPmtRep'.
1.3.6.1.4.1.6527.3.1.2.54.17.1.16Unsigned32 (200..4900)read-createcurrent
tmnxMcPathBdlChlVdoPoaPmtRep
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPoaPmtRep specifies the value of POA (Program off Air) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathBdlChlVdoPoaPmtRep' must also be greater than the value of 'tmnxMcPathBdlChlVdoQosPmtRep'.
1.3.6.1.4.1.6527.3.1.2.54.17.1.17Unsigned32 (300..5000)read-createcurrent
tmnxMcPathBdlChlVdoPmtSyntax
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoPmtSyntax specifies whether or not PMT syntax error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.18TruthValueread-createcurrent
tmnxMcPathBdlChlVdoScte35Error
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoScte35Error specifies whether or not SCTE35 (Society of Cable Telecommunications Engineers) errors are enabled for the video stream. This object was obsoleted in the 9.0 release.
1.3.6.1.4.1.6527.3.1.2.54.17.1.19TruthValueread-createobsolete
tmnxMcPathBdlChlVdoTeiError
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoTeiError specifies whether or not TEI (Transport Error Indicator) error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.20TruthValueread-createcurrent
tmnxMcPathBdlChlVdoTsSyncLoss
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoTsSyncLoss specifies whether or not sync loss error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.21TruthValueread-createcurrent
tmnxMcPathBdlChlVdoNonVidPIDAbs
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoNonVidPIDAbs specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of non-video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
1.3.6.1.4.1.6527.3.1.2.54.17.1.22Unsigned32 (0..5000)read-createcurrent
tmnxMcPathBdlChlVdoReportAlarm
OBJECT-TYPE
The value of tmnxMcPathBdlChlVdoReportAlarm specifies the severity of the analyzer state alarm for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.17.1.23TmnxVdoAnalyzerAlarmread-createcurrent
tmnxMcPathChlSrcExtTable
OBJECT-TYPE
The tmnxMcPathBdlExtTable has an entry for each multicast information policy bundle configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.18not-accessiblecurrent
tmnxMcPathChlSrcExtEntry
OBJECT-TYPE
A row entry is created or deleted in this table when the corresponding operation on a row is done in tmnxMcPathChlSrcTable. Entries in tmnxMcPathChlSrcTable are created or deleted by the user. Each row entry represents a specified sender configured for multicast bundle channel.
1.3.6.1.4.1.6527.3.1.2.54.18.1not-accessiblecurrent
tmnxMcPathChlSrcVdoLastChanged
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoLastChanged indicates the timestamp of the last change to this row in tmnxMcPathChlSrcExtTable.
1.3.6.1.4.1.6527.3.1.2.54.18.1.1TimeStampread-onlycurrent
tmnxMcPathChlSrcVdoCcError
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoCcError specifies whether or not the continuity counter error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.2TruthValueread-createcurrent
tmnxMcPathChlSrcVdoPatRepError
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPatRepError specifies whether or not PAT (Program Association Table) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.3TruthValueread-createcurrent
tmnxMcPathChlSrcVdoTncPatRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoTncPatRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PAT repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.18.1.4Unsigned32 (100..800)read-createcurrent
tmnxMcPathChlSrcVdoQosPatRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoQosPatRep specifies the value of QOS (Quality of Service) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoQosPatRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoTncPatRep'.
1.3.6.1.4.1.6527.3.1.2.54.18.1.5Unsigned32 (200..900)read-createcurrent
tmnxMcPathChlSrcVdoPoaPatRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPoaPatRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoPoaPatRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoQosPatRep'.
1.3.6.1.4.1.6527.3.1.2.54.18.1.6Unsigned32 (300..1000)read-createcurrent
tmnxMcPathChlSrcVdoPatSyntax
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPatSyntax specifies whether or not PAT syntax error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.7TruthValueread-createcurrent
tmnxMcPathChlSrcVdoPcrRepError
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPcrRepError specifies whether or not PCR (Program Clock Reference) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.8TruthValueread-createcurrent
tmnxMcPathChlSrcVdoTncPcrRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoTncPcrRep specifies the value of TNC (Tech Non-Conformant) in milli-seconds for PCR repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.18.1.9Unsigned32 (100..800)read-createcurrent
tmnxMcPathChlSrcVdoQosPcrRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoQosPcrRep specifies the value of QOS (Quality of Service) in milli-seconds for PCR repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoQosPcrRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoTncPcrRep'.
1.3.6.1.4.1.6527.3.1.2.54.18.1.10Unsigned32 (200..900)read-createcurrent
tmnxMcPathChlSrcVdoPoaPcrRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPoaPcrRep specifies the value of POA (Program off Air) in milli-seconds for PAT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoPoaPcrRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoQosPcrRep'.
1.3.6.1.4.1.6527.3.1.2.54.18.1.11Unsigned32 (300..1000)read-createcurrent
tmnxMcPathChlSrcVdoVidPIDAbs
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoVidPIDAbs specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
1.3.6.1.4.1.6527.3.1.2.54.18.1.12Unsigned32 (0..5000)read-createcurrent
tmnxMcPathChlSrcVdoPIDPmtUnref
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPIDPmtUnref specifies whether or not unreferenced PID (i.e. PIDs not specified in the PMT) error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.13TruthValueread-createcurrent
tmnxMcPathChlSrcVdoPmtRepError
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPmtRepError specifies whether or not PMT (Program Map Table) repetition error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.14TruthValueread-createcurrent
tmnxMcPathChlSrcVdoTncPmtRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoTncPmtRep specifies the value of TNC (Tech Non-Conformance) in milli-seconds for PMT repitition and should always be a multiple of 100.
1.3.6.1.4.1.6527.3.1.2.54.18.1.15Unsigned32 (100..4800)read-createcurrent
tmnxMcPathChlSrcVdoQosPmtRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoQosPmtRep specifies the value of QOS (Quality of Service) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoQosPmtRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoTncPmtRep'.
1.3.6.1.4.1.6527.3.1.2.54.18.1.16Unsigned32 (200..4900)read-createcurrent
tmnxMcPathChlSrcVdoPoaPmtRep
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPoaPmtRep specifies the value of POA (Program off Air) in milli-seconds for PMT repitition and should always be a multiple of 100. The value of 'tmnxMcPathChlSrcVdoPoaPmtRep' must also be greater than the value of 'tmnxMcPathChlSrcVdoQosPmtRep'.
1.3.6.1.4.1.6527.3.1.2.54.18.1.17Unsigned32 (300..5000)read-createcurrent
tmnxMcPathChlSrcVdoPmtSyntax
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoPmtSyntax specifies whether or not PMT syntax error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.18TruthValueread-createcurrent
tmnxMcPathChlSrcVdoScte35Error
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoScte35Error specifies whether or not SCTE35 (Society of Cable Telecommunications Engineers) errors are enabled for the video stream. This object was obsoleted in the 9.0 release.
1.3.6.1.4.1.6527.3.1.2.54.18.1.19TruthValueread-createobsolete
tmnxMcPathChlSrcVdoTeiError
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoTeiError specifies whether or not TEI (Transport Error Indicator) error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.20TruthValueread-createcurrent
tmnxMcPathChlSrcVdoTsSyncLoss
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoTsSyncLoss specifies whether or not sync loss error is enabled for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.21TruthValueread-createcurrent
tmnxMcPathChlSrcVdoNonVidPIDAbs
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoNonVidPIDAbs specifies the counting interval for 'TIMETRA-VIDEO-MIB::tmnxVdoPIDAbsentErrSecs' which accumulates the number of non-video PID absent errors for the video PID stream. It has a default value of 0 which means no error counting. Its value can only be changed by increments or decrements of 100 milliseconds otherwise a 'wrongValue' error is returned.
1.3.6.1.4.1.6527.3.1.2.54.18.1.22Unsigned32 (0..5000)read-createcurrent
tmnxMcPathChlSrcVdoReportAlarm
OBJECT-TYPE
The value of tmnxMcPathChlSrcVdoReportAlarm specifies the severity of the analyzer state alarm for the video stream.
1.3.6.1.4.1.6527.3.1.2.54.18.1.23TmnxVdoAnalyzerAlarmread-createcurrent
tmnxMcPathRprtDestTable
OBJECT-TYPE
The tmnxMcPathRprtDestTable has an entry for each multicast reporting destination configured on this system.
1.3.6.1.4.1.6527.3.1.2.54.19not-accessiblecurrent
tmnxMcPathRprtDestEntry
OBJECT-TYPE
Each row entry represents a particular multicast reporting destination. Entries are created/deleted by the user.
1.3.6.1.4.1.6527.3.1.2.54.19.1not-accessiblecurrent
tmnxMcPathRprtDestName
OBJECT-TYPE
The value of tmnxMcPathRprtDestName indicates the name of the multicast reporting destination.
1.3.6.1.4.1.6527.3.1.2.54.19.1.1TNamedItemnot-accessiblecurrent
tmnxMcPathRprtDestRowStatus
OBJECT-TYPE
The value of tmnxMcPathRprtDestRowStatus is used for creation/deletion of multicast reporting destinations.
1.3.6.1.4.1.6527.3.1.2.54.19.1.2RowStatusread-createcurrent
tmnxMcPathRprtDestLastChanged
OBJECT-TYPE
The value of tmnxMcPathRprtDestLastChanged indicates the timestamp of last change to this row in tmnxMcPathRprtDestTable.
1.3.6.1.4.1.6527.3.1.2.54.19.1.3TimeStampread-onlycurrent
tmnxMcPathRprtDestDescription
OBJECT-TYPE
The value of tmnxMcPathRprtDestDescription specifies the textual description of this multicast reporting destination.
1.3.6.1.4.1.6527.3.1.2.54.19.1.4TItemDescriptionread-createcurrent
tmnxMcPathRprtDestAddrType
OBJECT-TYPE
The value of tmnxMcPathRprtDestAddrType specifies the address type of tmnxMcPathRprtDestAddress.
1.3.6.1.4.1.6527.3.1.2.54.19.1.5InetAddressTyperead-createcurrent
tmnxMcPathRprtDestAddress
OBJECT-TYPE
The value of tmnxMcPathRprtDestAddress specifies the IP address of the multicast reporting destination.
1.3.6.1.4.1.6527.3.1.2.54.19.1.6InetAddress (SIZE(0 | 4 | 16))read-createcurrent
tmnxMcPathRprtDestUdpDstPort
OBJECT-TYPE
The value of tmnxMcPathRprtDestUdpDstPort specifies the UDP port at tmnxMcPathRprtDestAddress where to send multicast reports to.
1.3.6.1.4.1.6527.3.1.2.54.19.1.7InetPortNumberread-createcurrent
tmnxMcPathRprtDestMaxTxDelay
OBJECT-TYPE
The value of tmnxMcPathRprtDestMaxTxDelay specifies the maximum delay after which any cached reports will be flushed to the reporting destination. A value of 0 means the reports will not be cached, thus every report will trigger an ougtoing message
1.3.6.1.4.1.6527.3.1.2.54.19.1.8Unsigned32 (0..100)read-createcurrent
tmnxMcPathRprtDestAdminState
OBJECT-TYPE
The value of tmnxMcPathRprtDestAdminState indicates the administrative state of the mcast reporting destination.
1.3.6.1.4.1.6527.3.1.2.54.19.1.9TmnxAdminStateread-createcurrent
tmnxMcPathRprtDestFrmsSent
OBJECT-TYPE
The value of tmnxMcPathRprtDestFrmsSent specifies the number of frames sent to this mcast reporting destination.
1.3.6.1.4.1.6527.3.1.2.54.19.1.10Unsigned32read-onlycurrent
tmnxMcPathRprtDestFrmsLost
OBJECT-TYPE
The value of tmnxMcPathRprtDestFrmsLost specifies the number of frames lost for this mcast reporting destination.
1.3.6.1.4.1.6527.3.1.2.54.19.1.11Unsigned32read-onlycurrent
tmnxMcPathRprtDestRecsSent
OBJECT-TYPE
The value of tmnxMcPathRprtDestRecsSent specifies the number of records sent to this mcast reporting destination.
1.3.6.1.4.1.6527.3.1.2.54.19.1.12Unsigned32read-onlycurrent
tmnxMcPathRprtDestRecsLost
OBJECT-TYPE
The value of tmnxMcPathRprtDestRecsLost specifies the number of records lost for this mcast reporting destination.
1.3.6.1.4.1.6527.3.1.2.54.19.1.13Unsigned32read-onlycurrent
tmnxMcPathNotifyPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.3.54
tmnxMcPathNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6527.3.1.3.54.0

Notifications

NameOIDStatus
tmnxMcPathSrcGrpBlkHole
NOTIFICATION-TYPE
The tmnxMcPathSrcGrpBlkHole event is generated whenever a source, group(S,G) goes into a black-hole state.
1.3.6.1.4.1.6527.3.1.3.54.0.1current
tmnxMcPathSrcGrpBlkHoleClear
NOTIFICATION-TYPE
The tmnxMcPathSrcGrpBlkHoleClear event is generated whenever a source, group(S,G) comes out of black-hole state.
1.3.6.1.4.1.6527.3.1.3.54.0.2current
tmnxMcPathAvailBwLimitReached
NOTIFICATION-TYPE
The tmnxMcPathAvailBwLimitReached event is generated when the available bandwidth limit has reached.
1.3.6.1.4.1.6527.3.1.3.54.0.3current
tmnxMcPathAvailBwValWithinRange
NOTIFICATION-TYPE
The tmnxMcPathAvailBwValWithinRange event is generated when the available bandwidth limit falls below the maximum limit and is within the permitted range.
1.3.6.1.4.1.6527.3.1.3.54.0.4current

Conformance

NameOIDStatus
tmnxMcPathV6v0Compliance
MODULE-COMPLIANCE
The compliance statement for management of multicast management policies on version 6.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.1.1obsolete
tmnxMcPath7x50V6v1Compliance
MODULE-COMPLIANCE
The compliance statement for management of multicast management policies on version 6.1 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.1.2obsolete
tmnxMcPath7710V6v1Compliance
MODULE-COMPLIANCE
The compliance statement for management of multicast management policies on version 6.1 of the Alcatel-Lucent 7710 series systems.
1.3.6.1.4.1.6527.3.1.1.54.1.3current
tmnxMcPath7x50V7v0Compliance
MODULE-COMPLIANCE
The compliance statement for management of multicast management policies on version 7.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.1.4obsolete
tmnxMcPathV8v0Compliance
MODULE-COMPLIANCE
The compliance statement for management of multicast management policies on version 8.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.1.5obsolete
tmnxMcPathV9v0Compliance
MODULE-COMPLIANCE
The compliance statement for management of multicast management policies on version 9.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.1.6obsolete
tmnxMcPathV10v0Compliance
MODULE-COMPLIANCE
The compliance statement for management of multicast management policies on version 10.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.1.7current
tmnxMcPathGlobalGroup
OBJECT-GROUP
The group of objects supporting management of global objects related to multicast path management information on version 6.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.1current
tmnxMcPathPlcyV6v0Group
OBJECT-GROUP
The group of objects supporting multicast path management information on version 6.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.2current
tmnxMcPathBdlV6v0Group
OBJECT-GROUP
The group of objects supporting multicast path management information for bundles on version 6.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.3current
tmnxMcPathBdlChlV6v0Group
OBJECT-GROUP
The group of objects supporting multicast path management information for bundle channels on version 6.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.4current
tmnxMcPathChlSrcV6v0Group
OBJECT-GROUP
The group of objects supporting multicast path management information for channel sources which override multicast channel parameters on version 6.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.5current
tmnxMcPathOperChlV6v0Group
OBJECT-GROUP
The group of operational objects supporting multicast policy management on version 6.0 of the Alcatel-Lucent SROS series systems
1.3.6.1.4.1.6527.3.1.1.54.2.6current
tmnxMcPathNotificationGroup
NOTIFICATION-GROUP
The group of notifications supporting the multicast policy management on Alcatel-Lucent SROS SR series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.7current
tmnxMcPathNotifyObjsGroup
OBJECT-GROUP
The group of objects used by notifications supporting the multicast policy management on Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.8current
tmnxMcPathGlobalV6v1Group
OBJECT-GROUP
The group of objects supporting management of global objects related to multicast path management information on version 6.1 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.9current
tmnxMcPathPlcyV6v1Group
OBJECT-GROUP
The group of objects supporting multicast path management information on version 6.1 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.10current
tmnxMcPathVdoV7v0Group
OBJECT-GROUP
The group of objects supporting video multicast path management information on version 7.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.11current
tmnxMcPathTunnelIfV7v0Group
OBJECT-GROUP
The group of objects supporting tunnel interfaces related to multicast path management information on version 7.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.12current
tmnxMcPathGlobalV7v0Group
OBJECT-GROUP
The group of objects supporting management of global objects related to multicast path management information on version 7.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.13current
tmnxMcPathObsoleteV7v0Group
OBJECT-GROUP
The group of objects which are obsoleted in version 7.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.14current
tmnxMcPathGlobalV8v0Group
OBJECT-GROUP
The group of objects supporting management of global objects related to multicast path management information on version 8.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.15current
tmnxMcPathVdoV8v0Group
OBJECT-GROUP
The group of objects supporting video multicast path management information on version 8.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.16obsolete
tmnxMcPathGlobalExtV6v1Group
OBJECT-GROUP
The group of objects supporting management of global objects related to multicast path management information on version 6.1 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.17current
tmnxMcPathGlobalV9v0Group
OBJECT-GROUP
The group of objects supporting management of global objects related to multicast path management information on version 9.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.18current
tmnxMcPathRprtDestV9v0Group
OBJECT-GROUP
The group of objects supporting multicast reporting on version 9.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.19current
tmnxMcPathVdoV9v0Group
OBJECT-GROUP
The group of objects supporting video multicast path management information on version 9.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.20current
tmnxMcPathVdoObsoletedV9v0Group
OBJECT-GROUP
The group of objects obsoleted on version 9.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.21current
tmnxMcPathSwPlaneGroup
OBJECT-GROUP
The group of objects supporting multicast policy management switch planes on the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.22current
tmnxMcPathGlobalV10v0Group
OBJECT-GROUP
The group of objects supporting management of global objects related to multicast path management information on version 10.0 of the Alcatel-Lucent SROS series systems.
1.3.6.1.4.1.6527.3.1.1.54.2.23current