CISCO-LWAPP-AP-MIB
- Registered at
- 1.3.6.1.4.1.9.9.513
- Last updated
- 2021-10-01 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2022-06-06 00:00, 2022-01-01 00:00, 2021-10-01 00:00, 2021-06-06 00:00, 2020-10-26 00:00, 2020-10-08 00:00, 2020-09-29 00:00, 2020-04-28 00:00, 2020-03-31 00:00, 2019-11-08 00:00, 2019-10-16 00:00, 2019-06-25 00:00, 2019-04-08 00:00, 2018-09-17 00:00, 2018-07-26 00:00, 2018-06-26 00:00, 2018-04-24 01:01, 2018-04-24 00:00, 2018-03-28 00:00, 2017-07-07 00:00, 2017-05-07 00:00, 2016-08-30 00:00, 2016-04-07 00:00, 2015-09-21 00:00, 2014-07-15 00:00, 2012-06-13 00:00, 2011-02-07 00:00, 2011-01-21 00:00, 2011-01-10 00:00, 2010-12-13 00:00, 2010-08-19 00:00, 2007-01-03 00:00, 2006-07-18 00:00, 2006-03-30 00:00
- Namespace
- cisco
- Source file
CISCO-LWAPP-AP-MIB- Digest
sha256:09f878d1e262a3bc4cd55fa056140eee027ba864f1a3ab824a837ac13326ab90
Description
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about the 802.11 Access Points that have joined the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Bluetooth Low Energy (BLE) Bluetooth Low Energy is a light-weight subset of classic bluetooth which is added in Hyper Action Location (HALO) enabled APs to make use of BLE beacons to communicate with wireless clients at short range. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Hyper Action Location (HALO) This is an external module for Cisco Access Points, which is responsible for high accuracy indoor location. It includes smart antenna and new software interfaces to enable high accuracy indoor location. iBeacon This is a low-cost transmitter which can transmit its own unique identification number to the local area. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Station Management (SMT) This term refers to the internal management of the 802.11 protocol operations by the AP to work cooperatively with the other APs and 802.11 devices in the network. Link Latency Latency is round trip time between AP and controller. There is a continuous heart-beat between AP and controller. AP calculates latency for each time and sends to controller. AMSDU Aggregate MAC Service Data Unit. A structure containing multiple MSDUs, transported within a single (unfragmented) or multiple (fragmented) Data MPDU. DTLS Datagram Transport Layer Security (DTLS) protocol provides communications privacy for datagram protocols. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery. WIPS Wireless Intrusion Prevention System (WIPS) is a network device that monitors the radio spectrum for the presence of unauthorized access points (intrusion detection), and can automatically take countermeasures (intrusion prevention). SE Spectrum Expert is an application software, which when connected to Spectrum Intelligent Access Point, provides detailed RF spectrum plots and data, and assist in diagnosing network problems. PPPOE Point-to-Point Protocol Over Ethernet provides a standard method to build sessions for transporting multi-protocol datagrams between point-to-point links over Ethernet. OEAP Office Extended Access Point provides a method to extend their office network to outside the office premises like the employee homes, thereby providing a seamless experience to the employee irrespective of the location of the work. This solution should also support having private SSID whose data need to be switched at the AP itself. EWC Embedded Wireless Controller on AP wireless network solution comprises of at least one 802.11ac Wave 2 Cisco Aironet Series access point (AP) with an in-built software-based wireless controller (WLC) managing other APs in the network. The AP acting as the WLC is referred to as the master AP while the other APs in the Cisco Embedded Wireless Controller network, which are managed by this master AP, are referred to as subordinate APs. In addition to acting as a WLC, the master AP also operates as an AP to serve clients along with the subordinate APs. FIPS Federal Information Processing Standards are a set of standards that describe document processing, encryption algorithms and other information technology standards for use within non-military government agencies and by government contractors and vendors who work with the agencies. LAG Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel. This reduces the number of IP addresses required to configure the ports on your controller. When LAG is enabled, the system dynamically manages port redundancy and load balances access points transparently to the user. CAPWAP The Control And Provisioning of Wireless Access Points (CAPWAP) protocol is a standard, interoperable networking protocol that enables a central wireless LAN Access Controller (AC) to manage a collection of Wireless Termination Points (WTPs), more commonly known as Wireless Access Points. Flexible Radio Assignment The Flexible Radio Assignment feature allows either manual configuration of capable APs or for these APs to intelligently determine the operating role of the integrated radios based on the available RF environment. APs with flexible radio can automatically detect when a high number of devices are connected to a network and changes the dual radios in the access point from 2.4 GHz/5 GHz to 5 GHz/5 GHz to serve more clients. The AP performs this task while monitoring the network for security threats and RF Interference that may affect performance. Flexible Radio Assignment improves mobile user experience for high-density networks. XOR Radio XOR radio is a radio that can operate on both 2.4Ghz and 5Ghz bandwidth. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.
Contact
Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-LWAPP-DOT11-MIB | cldRegulatoryDomain |
| CISCO-LWAPP-RF-MIB | cLRFProfileHDClientTrapThreshold, cLRFProfileHighDensityMaxRadioClients |
| CISCO-LWAPP-TC-MIB | CLApAssocFailureReason, CLApDot11RadioRole, CLApDot11RadioSubband, CLApIfType, CLApMode, CLApNtpStatus, CLDot11Band, CLDot11Channel |
| CISCO-LWAPP-WLAN-MIB | cLWlanIndex |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | Unsigned64 |
| ENTITY-MIB | PhysicalIndex |
| IANAifType-MIB | IANAifType |
| INET-ADDRESS-MIB | InetAddress, InetAddressType, InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue |
Imported by
18 module(s) in this corpus import this one.
- CISCO-LWAPP-CCX-RM-MIB
- CISCO-LWAPP-CDP-MIB
- CISCO-LWAPP-CLIENT-ROAMING-MIB
- CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB
- CISCO-LWAPP-DOT11-CLIENT-MIB
- CISCO-LWAPP-DOT11-MIB
- CISCO-LWAPP-DOWNLOAD-MIB
- CISCO-LWAPP-MESH-BATTERY-MIB
- CISCO-LWAPP-MESH-MIB
- CISCO-LWAPP-MESH-STATS-MIB
- CISCO-LWAPP-MFP-MIB
- CISCO-LWAPP-ROGUE-MIB
- CISCO-LWAPP-RRM-MIB
- CISCO-LWAPP-SI-MIB
- CISCO-LWAPP-TRUSTSEC-MIB
- CISCO-LWAPP-TSM-MIB
- CISCO-LWAPP-TUNNEL-MIB
- CISCO-LWAPP-WAPI-MIB
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-LWAPP-AP-MIB CISCO-LWAPP-DOT11-MIB CISCO-LWAPP-RF-MIB CISCO-LWAPP-TC-MIB CISCO-LWAPP-WLAN-MIB CISCO-SMI CISCO-TC ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | |
| 1.3.6.1.4.1.9.9.513.4 | ciscoLwappDownloadMIB | CISCO-LWAPP-DOWNLOAD-MIB |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoLwappApMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.0 | |||
| ciscoLwappApMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1 | |||
| ciscoLwappAp OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.1 | |||
| cLApTable OBJECT-TYPE This table represents the information about the 802.11 LWAPP Access Points that have joined the controller. LWAPP APs exchange configuration messages with the controller and get the required configuration for their 802.11 related operations, after they join the controller. | 1.3.6.1.4.1.9.9.513.1.1.1 | not-accessible | current | |
| cLApEntry OBJECT-TYPE Each entry in this table provides information about one 802.11 LWAPP Access Point that has joined the controller. Entries are removed when the APs lose their association with the controller due to loss of communication. | 1.3.6.1.4.1.9.9.513.1.1.1.1 | not-accessible | current | |
| cLApSysMacAddress OBJECT-TYPE This object represents the radio MAC address common to the dot11 interfaces of the AP and uniquely identifies an entry in this table. | 1.3.6.1.4.1.9.9.513.1.1.1.1.1 | MacAddress | not-accessible | current |
| cLApIfMacAddress OBJECT-TYPE This object represents the Ethernet MAC address of the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.2 | MacAddress | read-only | current |
| cLApMaxNumberOfDot11Slots OBJECT-TYPE This object represents the maximum number of 802.11 radio interface slots in this AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.3 | Unsigned32 | read-only | current |
| cLApEntPhysicalIndex OBJECT-TYPE This object provides the index value in the entPhysicalEntry corresponding to this AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.4 | PhysicalIndex | read-only | current |
| cLApName OBJECT-TYPE This object specifies the administrative name assigned to the AP by the user. If an AP is not configured, its factory default name will be ap:<last three byte of MACAddress> eg. ap:af:12:be. | 1.3.6.1.4.1.9.9.513.1.1.1.1.5 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApUpTime OBJECT-TYPE This object represents the time in hundredths of a second since the last time the AP rebooted. | 1.3.6.1.4.1.9.9.513.1.1.1.1.6 | TimeTicks | read-only | current |
| cLLwappUpTime OBJECT-TYPE This object represents the time in hundredths of a second since the last time the AP joined the controller. | 1.3.6.1.4.1.9.9.513.1.1.1.1.7 | TimeTicks | read-only | current |
| cLLwappJoinTakenTime OBJECT-TYPE This object represents the time taken in hundredths of a second for the AP to join the controller. This could be a significant value in Mesh environments. | 1.3.6.1.4.1.9.9.513.1.1.1.1.8 | TimeTicks | read-only | current |
| cLApMaxNumberOfEthernetSlots OBJECT-TYPE This object represents the maximum number of Ethernet slots in this AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.9 | Unsigned32 | read-only | current |
| cLApPrimaryControllerAddressType OBJECT-TYPE This object specifies the type of the primary controller's address made available through cLApPrimaryControllerAddress. | 1.3.6.1.4.1.9.9.513.1.1.1.1.10 | InetAddressType | read-write | current |
| cLApPrimaryControllerAddress OBJECT-TYPE This object specifies the address of the primary controller that the APs will join. | 1.3.6.1.4.1.9.9.513.1.1.1.1.11 | InetAddress | read-write | current |
| cLApSecondaryControllerAddressType OBJECT-TYPE This object specifies the type of the secondary controller's address made available through cLApSecondaryControllerAddress. | 1.3.6.1.4.1.9.9.513.1.1.1.1.12 | InetAddressType | read-write | current |
| cLApSecondaryControllerAddress OBJECT-TYPE This object specifies the address of the secondary controller that the APs will join. | 1.3.6.1.4.1.9.9.513.1.1.1.1.13 | InetAddress | read-write | current |
| cLApTertiaryControllerAddressType OBJECT-TYPE This object specifies the type of the tertiary controller's address made available through cLApTertiaryControllerAddress. | 1.3.6.1.4.1.9.9.513.1.1.1.1.14 | InetAddressType | read-write | current |
| cLApTertiaryControllerAddress OBJECT-TYPE This object specifies the address of the tertiary controller that the APs will join. | 1.3.6.1.4.1.9.9.513.1.1.1.1.15 | InetAddress | read-write | current |
| cLApLastRebootReason OBJECT-TYPE This object represents the reason for the last reboot of the AP. none - ap reported a reboot reason code unknown to the controller. dot11gModeChange - 11g mode change ipAddressSet - set static ip address ipAddressReset - reset static ip address rebootFromController - ap reboot initiated from controller dhcpFallbackFail - could not fallback to dhcp discoveryFail - could not send discovery noJoinResponse - did not receive join response denyJoin - deny join attempt at the controller noConfigResponse - did not get config response configController - found configured or master controller imageUpgradeSuccess - image upgraded successfully imageOpcodeInvalid - invalid image data opcode imageCheckSumInvalid - invalid image md5 checksum imageDataTimeout - image data message timeout configFileInvalid - invalid config file imageDownloadError - image download process error rebootFromConsole - reboot command from ap console rapOverAir - root access point is connected over the air brownout - ap rebooted due to power failure powerLow - ap rebooted dued to low power also called as brownout crash - crashed due to software failure powerHigh - rebooted due to power spike powerLoss - rebooted due to power loss powerChange - rebooted due to change in power source componentFailure - rebooted due to component failure watchdog - rebooted due to watch dog timer reset. lscEnabled - rebooted as LSC was enabled lscDisabled - rebooted as LSC was disabled lscProvTimeout - rebooted due to LSC provision timeout lscMaxProvReqRetries - rebooted due to maximum retries of LSC provision request lscLoadFailure - rebooted due to LSC load failure lscJoinFailure - rebooted due to LSC join failure. capwapTimerFailure - rebooted due to capwap timer failure staticIpFailover - rebooted due to static IP failover vlanTagFailover - rebooted due to vlan tag failover capwapDiscoveryRequest - link failure while processing capwap discovery request capwapDiscoveryResponse - link failure while processing capwap discovery response capwapJoinRequest - rebooted due to capwap join request capwapJoinResponse - rebooted due to capwap join response capwapConfigurationStatus- rebooted due to capwap configuration status request capwapConfigurationStatusResponse - rebooted due to capwap configuration status response capwapConfigurationUpdateRequest- rebooted due to capwap configuration update request capwapConfigurationUpdateResponse - rebooted due to capwap configuration update response capwapWtpEventRequest - rebooted due to capwap WTP event request capwapWtpEventResponse - rebooted due to capwap WTP event response capwapChangeStateEventRequest - rebooted due to capwap change state event request capwapChangeStateEventResponse - rebooted due to capwap change state event response capwapEchoRequest - rebooted due to capwap echo request capwapEchoResponse - rebooted due to capwap echo response capwapImageDataRequest - rebooted due to capwap image data request capwapImageDataResponse - rebooted due to capwap image data response capwapResetRequest - rebooted due to capwap reset request capwapResetResponse - rebooted due to capwap reset response capwapPrimaryDiscoveryRequest - rebooted due to capwap primary discovery request capwapPrimaryDiscoveryResponse - rebooted due to capwap primary discovery response capwapDataTransferRequest - rebooted due to capwap data transfer request capwapDataTransferResponse - rebooted due to capwap data transfer response capwapClearConfigurationRequest-rebooted due to capwap clear configuration request capwapClearConfigurationResponse-rebooted due to capwap clear configuration response capwapMobileConfigurationRequest-rebooted due to capwap mobile configuration request capwapMobileConfigurationResponse-rebooted due to capwap mobile configuration response capwapPathMtuRequest - rebooted due to capwap path MTU request capwapPathMtuResponse - rebooted due to capwap path MTU response. vlanTagRetry - rebooted due to vlan tag retry ipv6AddrSet - rebooted due to setting of static ipv6 address modeChange - rebooted due to mode change typeChangedToCapwap - rebooted due to type changed from EWC(Embedded Wireless Controller) to CAPWAP typeChangedToMe - rebooted due to type changed from CAPWAP to EWC(Embedded Wireless Controller) eraseCfgCommand - rebooted due to erase config command oeapModeCfgUpload - rebooted due to OEAP(Office Extended Access Point) mode config upload lagCfg - rebooted due to LAG(Link Aggregate Group) configuration change fipsModeChange - rebooted due to FIPS(Federal Information Processing Standards) mode change diminishedPowerChange - rebooted due to change in diminished power slubDebug - rebooted due to slub debug lscModeCapwap - LSC for CAPWAP lscModeDot1x - LSC for Dot1x lscModeAll - LSC for all apTypeCloud - AP type changed to cloud dtlsInitFailure - DTLS init failure pnpNoCapwapBackOff - In PNP, no CAPWAP backoff for more than 24hrs day0CfgFail - Day 0 config failure day1CfgFail - Day 1 config failure pnpTriggeredReload - Reboot triggered by PnP server triRadioSupport - Tri-radio support change indoorDeployment - Indoor Deployment apTypeWgbToCapwap - AP type changed from WGB to CAPWAP apTypeCloudToCapwap - AP type changed from cloud to CAPWAP apTypeWgb - AP type changed from CAPWAP to WGB | 1.3.6.1.4.1.9.9.513.1.1.1.1.16 | INTEGER {none(0), dot11gModeChange(1), ipAddressSet(2), ipAddressReset(3), rebootFromController(4), dhcpFallbackFail(5), discoveryFail(6), noJoinResponse(7), denyJoin(8), noConfigResponse(9), configController(10), imageUpgradeSuccess(11), imageOpcodeInvalid(12), imageCheckSumInvalid(13), imageDataTimeout(14), configFileInvalid(15), imageDownloadError(16), rebootFromConsole(17), rapOverAir(18), powerLow(19), crash(20), powerHigh(21), powerLoss(22), powerChange(23), componentFailure(24), watchdog(25), lscEnabled(26), lscDisabled(27), lscProvTimeout(28), lscMaxProvReqRetries(29), lscLoadFailure(30), lscJoinFailure(31), capwapTimerFailure(32), staticIpFailover(33), vlanTagFailover(34), capwapDiscoveryRequest(35), capwapDiscoveryResponse(36), capwapJoinRequest(37), capwapJoinResponse(38), capwapConfigurationStatus(39), capwapConfigurationStatusResponse(40), capwapConfigurationUpdateRequest(41), capwapConfigurationUpdateResponse(42), capwapWtpEventRequest(43), capwapWtpEventResponse(44), capwapChangeStateEventRequest(45), capwapChangeStateEventResponse(46), capwapEchoRequest(47), capwapEchoResponse(48), capwapImageDataRequest(49), capwapImageDataResponse(50), capwapResetRequest(51), capwapResetResponse(52), capwapPrimaryDiscoveryRequest(53), capwapPrimaryDiscoveryResponse(54), capwapDataTransferRequest(55), capwapDataTransferResponse(56), capwapClearConfigurationRequest(57), capwapClearConfigurationResponse(58), capwapMobileConfigurationRequest(59), capwapMobileConfigurationResponse(60), capwapPathMtuRequest(61), capwapPathMtuResponse(62), vlanTagRetry(63), ipv6AddrSet(64), modeChange(65), typeChangedToCapwap(66), typeChangedToMe(67), eraseCfgCommand(68), oeapModeCfgUpload(69), lagCfg(70), fipsModeChange(71), diminishedPowerChange(72), slubDebug(73), lscModeCapwap(74), lscModeDot1x(75), lscModeAll(76), apTypeCloud(77), dtlsInitFailure(78), pnpNoCapwapBackOff(79), day0CfgFail(80), day1CfgFail(81), pnpTriggeredReload(82), triRadioSupport(83), indoorDeployment(84), apTypeWgbToCapwap(85), apTypeCloudToCapwap(86), apTypeWgb(87)} | read-only | current |
| cLApEncryptionEnable OBJECT-TYPE This object specifies whether encyrption between controller and AP is enabled or not. Encryption can only be enabled if ESM card in controller is pluged in. A value of 'true' enables encryption between controller and AP. A value of 'false' disables encryption between controller and AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.18 | TruthValue | read-write | current |
| cLApFailoverPriority OBJECT-TYPE This object specifies the AP failover priority for an AP. If a higher priority AP wishes to join the controller, it will be given preference over a join request from a lower priority AP. Also if the number of AP joined has reached the limit that the controller can support then the controller can disassociate an already joined lower priority AP. This priority will be considered only if the cLApGlobalFailoverPriority is Enabled on the controller. low - AP failover priority is low for this controller. medium - AP failover priority is medium for this controller. high - AP failover priority is high for this controller. critical - AP failover priority is critical for this controller. | 1.3.6.1.4.1.9.9.513.1.1.1.1.19 | INTEGER {low(1), medium(2), high(3), critical(4)} | read-write | current |
| cLApPowerStatus OBJECT-TYPE This object represents the power status of the AP low - The AP is drawing low power from Ethernet fifteendotfour - The AP is drawing 15.4 watts from Ethernet sixteendoteight - The AP is drawing 16.8 watts from Ethernet twentyfivedotfive - The AP is drawing 25.5 watts from Ethernet full - The power is high enough for normal operation of the AP. The power source could be Ethernet or external external - The power source is not from Ethernet. mixedmode - The power is high enough for operation of AP. In this state one radio will operate in full power mode while the other radio will be powered off or operate at reduced capacity. | 1.3.6.1.4.1.9.9.513.1.1.1.1.20 | INTEGER {low(1), fifteendotfour(2), sixteendoteight(3), full(4), external(5), twentyfivedotfive(6), mixedmode(7)} | read-only | current |
| cLApTelnetEnable OBJECT-TYPE This object specifies whether telnet session can be established to the AP. A value of 'true' indicates an telnet session can be established to the AP. A value of 'false' indicates an telnet session cannot be established to the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.21 | TruthValue | read-write | current |
| cLApSshEnable OBJECT-TYPE This object specifies whether SSH session can be established to the AP. A value of 'true' indicates an SSH session can be established to the AP. A value of 'false' indicates an SSH session cannot be established to the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.22 | TruthValue | read-write | current |
| cLApPreStdStateEnabled OBJECT-TYPE This object specifies whether the pre-standard state of the AP is enabled or disabled. A value of 'true' indicates that the pre-standard state of the AP is enabled, A value of 'false' indicates that the pre-standard state of the AP is disabled | 1.3.6.1.4.1.9.9.513.1.1.1.1.23 | TruthValue | read-write | current |
| cLApPwrInjectorStateEnabled OBJECT-TYPE This object specifies whether the power injector state of the AP is enabled or disabled. A value of 'true' indicates that the power injector state of the AP is enabled, A value of 'false' indicates that the power injector state of the AP is disabled | 1.3.6.1.4.1.9.9.513.1.1.1.1.24 | TruthValue | read-write | current |
| cLApPwrInjectorSelection OBJECT-TYPE This object specifies the power injector selection value of the AP. 'unknown' - is returned if 'cLApPwrInjectorStateEnabled'is set to false. 'installed' - configure the MAC address of the switch port that has a Power Injector. 'override' - override the safety checks and assume a power injector is always installed. | 1.3.6.1.4.1.9.9.513.1.1.1.1.25 | INTEGER {unknown(1), installed(2), override(3)} | read-write | current |
| cLApPwrInjectorSwMacAddr OBJECT-TYPE This object specifies the MAC address of the switch port that has a power Injector and is valid only when the 'cLApPwrInjectorSelection' is in 'installed' mode. if SET to 00:00:00:00:00:00, AP will detect the MAC address of the current switch port that has a Power Injector | 1.3.6.1.4.1.9.9.513.1.1.1.1.26 | MacAddress | read-write | current |
| cLApWipsEnable OBJECT-TYPE This object represents if this AP is used as WIPS AP. A value of 'true' indicates that this AP is a WIPS AP. A value of 'false' indicates that this AP is not a WIPS AP. This applies only when the AP is either in local or monitor mode. | 1.3.6.1.4.1.9.9.513.1.1.1.1.27 | TruthValue | read-write | deprecated |
| cLApMonitorModeOptimization OBJECT-TYPE This object specifies the monitor mode optimization on this device. all - All optimization is enabled tracking - Tracking is optimized wips - WIPS optimization is enabled none - No optimization is enabled | 1.3.6.1.4.1.9.9.513.1.1.1.1.28 | INTEGER {all(1), tracking(2), wips(3), none(4)} | read-write | current |
| cLApDomainName OBJECT-TYPE This object specifies the domain, to which the AP belongs. This attribute can be configured only if the static IP option is turned on in the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.29 | SnmpAdminString | read-write | current |
| cLApNameServerAddressType OBJECT-TYPE This object specifies the type of the IP address of the name server, made available through cLApNameServerAddress. | 1.3.6.1.4.1.9.9.513.1.1.1.1.30 | InetAddressType | read-write | current |
| cLApNameServerAddress OBJECT-TYPE This object specifies the IP Address of the name server. This attribute can be configured only if the static IP option is turned on in the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.31 | InetAddress | read-write | current |
| cLApAMSDUEnable OBJECT-TYPE This object specifies the AMSDU status. A value of 'true' indicates AMSDU is enabled. A value of 'false' indicates AMSDU is disabled. | 1.3.6.1.4.1.9.9.513.1.1.1.1.32 | TruthValue | read-write | current |
| cLApEncryptionSupported OBJECT-TYPE This object specifies whether AP Supports DTLS encryption. A value of 'true' indicates encryption is supported. A value of 'false' indicates encryption is not supported. | 1.3.6.1.4.1.9.9.513.1.1.1.1.33 | TruthValue | read-write | current |
| cLApRogueDetectionEnabled OBJECT-TYPE This object specifies whether Rogue Detection is enabled in this AP. A value of 'true' indicates rogue detection is enabled. A value of 'false' indicates rogue detection is disabled. Rogue detection is not supported on sniffer and rogue detector mode APs. | 1.3.6.1.4.1.9.9.513.1.1.1.1.34 | TruthValue | read-write | current |
| cLApTcpMss OBJECT-TYPE This object specifies the TCP Maximum Segment Size for this AP. Permissible value are between 536 and 1363. This will also enable the TCP MSS flag for this AP. Value of 0 will disable the TCP MSS flag for this AP. Any change of value for cLApGlobalTcpMss will be reflected to this object. Value for this object can be change only when value of cLApGlobalTcpMss is set as 0. | 1.3.6.1.4.1.9.9.513.1.1.1.1.35 | Integer32 (0 | 536..1363) | read-write | current |
| cLApDataEncryptionStatus OBJECT-TYPE This object represents the data encryption status of AP. A value of 'true' indicates data is encrypted between AP and WLC. A value of 'false' indicates data is plain text between AP and WLC. | 1.3.6.1.4.1.9.9.513.1.1.1.1.36 | TruthValue | read-only | current |
| cLApNsiKey OBJECT-TYPE This object represents the network spectrum interface key used when the AP is in spectrum expert Only monitor mode (SOMM).This object returns a non-zero value only when the AP is SOMM mode. | 1.3.6.1.4.1.9.9.513.1.1.1.1.37 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| cLApAdminStatus OBJECT-TYPE This object specifies the admin state of the AP, A value of 'true' indicates AP admin status is up. A value of 'false' indicates AP admin status is down. | 1.3.6.1.4.1.9.9.513.1.1.1.1.38 | TruthValue | read-write | current |
| cLApPortNumber OBJECT-TYPE This object represents the port number on which the AP's traffic is coming through. | 1.3.6.1.4.1.9.9.513.1.1.1.1.39 | InetPortNumber | read-only | current |
| cLApRetransmitCount OBJECT-TYPE This object specifies the retransmission count for the access point control packet.This value specifies the number of packets retransmitted after which the Access Point falls back to another controller in case of failover. The global retransmit parameters are applicable for all access points within a controller. The individual paramters per access point, if configured takes precedence over the global values. If an access point falls back from another controller(in case of failover), the values at the AP level has more precedence over the global values in the controller with which it has joined. | 1.3.6.1.4.1.9.9.513.1.1.1.1.40 | Unsigned32 | read-write | current |
| cLApRetransmitTimeout OBJECT-TYPE This object specifies the retransmission timeout for the access point control packet. This value specifies the timeout for each retransmission, during the fallback of access point to another controller in case of failover. The global retransmit parameters are applicable for all access points within a controller. The individual paramters per access point, if configured takes precedence over the global values. If an access point falls back from another controller(in case of failover), the values at the AP level has more precedence over the global values in the controller with which it has joined. | 1.3.6.1.4.1.9.9.513.1.1.1.1.41 | Unsigned32 | read-write | current |
| cLApVenueConfigVenueGroup OBJECT-TYPE This object specifies the venue group for this WLAN. | 1.3.6.1.4.1.9.9.513.1.1.1.1.42 | INTEGER {unspecified(1), assembly(2), business(3), educational(4), factoryAndIndustrial(5), institutional(6), mercantile(7), residential(8), storage(9), utilityAndMisc(10), vehicular(11), outdoor(12)} | read-write | current |
| cLApVenueConfigVenueType OBJECT-TYPE This object specifies the venue type within a particular venue group,for this WLAN. The venue group-venue type relationship is per the following table: Venue Group Venue Type Code Venue Description =========== =============== ================= 0 0 Unspecified 0 1-255 Reserved 1 0 Unspecified Assembly 1 1 Arena 1 2 Stadium 1 3 Passenger Terminal (e.g., airport, port, bus station, ferry terminal, train station) 1 4 Amphitheater 1 5 Amusement Park 1 6 Place of Worship 1 7 Convention Center 1 8 Library 1 9 Museum 1 10 Restaurant 1 11 Theater 1 12 Bar 1 13 Coffee Shop 1 14 Zoo or Aquarium 1 15 Emergency Coordination Center 1 16-255 Reserved 2 0 Unspecified Business 2 1 Doctor or Dentist office 2 2 Bank 2 3 Fire Station 2 4 Police Station 2 6 Post Office 2 7 Professional Office 2 8 Research and Development Facility 2 9 Attorney Office 2 10-255 Reserved 3 0 Unspecified Educational 3 1 School, Primary 3 2 School, Secondary 3 3 University or College 3 4-255 Reserved 4 0 Unspecified Factory and Industrial 4 1 Factory 4 2-255 Reserved 5 0 Unspecified Institutional 5 1 Hospital 5 2 Long-Term Care Facility (e.g., Nursing home, Hospice, etc.) 5 3 Alcohol and Drug Re-habilitation Center 5 4 Group Home 5 5 Prison or Jail 5 6-255 Reserved 6 0 Unspecified Mercantile 6 1 Retail Store 6 2 Grocery Market 6 3 Automotive Service Station 6 4-255 Reserved 7 0 Unspecified Residential 7 1 Hotel or Motel 7 2 Dormitory 7 3 Boarding House 7 4-255 Reserved 8 0-255 Reserved 9 0-255 Reserved 10 0 Unspecified Vehicular 10 1 Automobile or Truck 10 2 Airplane 10 3 Bus 10 4 Ferry 10 5 Ship or Boat 10 6 Train 10 7-255 Reserved 11 0 Unspecified Outdoor 11 1 Muni-mesh Network 11 2 City Park 11 3-255 Reserved | 1.3.6.1.4.1.9.9.513.1.1.1.1.43 | INTEGER {unspecified(1), unspecifiedAssembly(2), arena(3), stadium(4), passengerTerminal(5), amphitheater(6), amusementPark(7), placeOfWorship(8), conventionCenter(9), library(10), museum(11), restaurant(12), theater(13), bar(14), coffeeShop(15), zooOrAquarium(16), emergencyCoordinationCenter(17), unspecifiedBusiness(18), doctorOrDentistOffice(19), bank(20), fireStation(21), policeStation(22), postOffice(23), professionalOffice(24), researchAndDevelopmentFacility(25), attorneyOffice(26), unspecifiedEducational(27), schoolPrimary(28), schoolSecondary(29), universityOrCollege(30), unspecifiedFactoryAndIndustrial(31), factory(32), unspecifiedInstitutional(33), hospital(34), longTermCareFacility(35), alcoholAndDrugRehabilitationCenter(36), groupHome(37), prisonOrJail(38), unspecifiedMercantile(39), retailStore(40), groceryMarket(41), atomotiveServiceStation(42), shoppingMall(43), gasStation(44), unspecifiedResidential(45), privateResidence(46), hotelOrMotel(47), dormitory(48), boardingHouse(49), unspecifiedStorage(50), unspecifiedUtility(51), unspecifiedVehicular(52), automobileOrTruck(53), airplane(54), bus(55), ferry(56), shipOrBoat(57), train(58), motorBike(59), unspecifiedOutdoor(60), muniMeshNetwork(61), cityPark(62), restArea(63), trafficControl(64), busStop(65), kiosk(66)} | read-write | current |
| cLApVenueConfigVenueName OBJECT-TYPE This object specifies the venue name defined for this AP group. | 1.3.6.1.4.1.9.9.513.1.1.1.1.44 | SnmpAdminString | read-write | current |
| cLApVenueConfigLanguage OBJECT-TYPE This object specifies the language defined for this AP group. | 1.3.6.1.4.1.9.9.513.1.1.1.1.45 | SnmpAdminString | read-write | current |
| cLApLEDState OBJECT-TYPE This object specifies whether the LED state of this access point should be enabled or disabled. A value of 'true' indicates LED status is enabled. A value of 'false' indicates LED status is disabled. | 1.3.6.1.4.1.9.9.513.1.1.1.1.46 | TruthValue | read-write | current |
| cLApTrunkVlan OBJECT-TYPE This object specifies the trunk VLAN ID assigned to this AP's ethernet interface. When a non-zero value is assigned for this Object, the management packets will be tagged with this VLAN ID. When the value of trunk VLAN ID is zero, the packets will be untagged | 1.3.6.1.4.1.9.9.513.1.1.1.1.47 | Unsigned32 | read-write | current |
| cLApTrunkVlanStatus OBJECT-TYPE This object specifies whether the trunk VLAN ID assigned to this AP's is effective. If the AP is unable to route the management frames through the trunk vlan, it will revert back to untagged mode. A value of true indicates that the configured trunk VLAN has taken effect and a value of false indicates that the management packets will be untagged | 1.3.6.1.4.1.9.9.513.1.1.1.1.48 | TruthValue | read-only | current |
| cLApLocation OBJECT-TYPE This object specifies the user specified location of this AP. While configuring AP, user should specify a location for the AP so that its easy to figure out for some one where the AP is located. | 1.3.6.1.4.1.9.9.513.1.1.1.1.49 | SnmpAdminString | read-write | current |
| cLApSubMode OBJECT-TYPE This object specifies the sub mode of the AP. The option 'wips' applies only when the AP is in local, flexConnect or monitor mode. This 'pppoe' options apply only when the AP is in flexConnect mode. | 1.3.6.1.4.1.9.9.513.1.1.1.1.50 | INTEGER {none(1), wips(2), pppoe(3), pppoeWips(4)} | read-write | current |
| cLApAssocCount OBJECT-TYPE This object specifies the association count for the access point. This counter includes both successful and failed associate attempts, but does NOT include the re-associate attempts. | 1.3.6.1.4.1.9.9.513.1.1.1.1.51 | Unsigned32 | read-only | current |
| cLApAssocFailResourceCount OBJECT-TYPE This object specifies the association failure count for the access point due to the resource limits, i.e. the max clients of the WLAN/Radio is reached. | 1.3.6.1.4.1.9.9.513.1.1.1.1.52 | Unsigned32 | read-only | current |
| cLApRealTimeStatsModeEnabled OBJECT-TYPE This object specifies whether current stats mode is 'realtime'. There are two stats-mode, realtime and normal which specifies the stats-timer range to be 10-180 sec and 2-5 sec each. A value of 'true' indicates current mode is realtime. A value of 'false' indicates current mode is not realtime. | 1.3.6.1.4.1.9.9.513.1.1.1.1.53 | TruthValue | read-write | current |
| cLApAssociatedClientCount OBJECT-TYPE This object represents the associated client number for the access point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.54 | Unsigned32 | read-only | current |
| cLApMemoryCurrentUsage OBJECT-TYPE This object represents the percent of current memory usage of the access point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.55 | Unsigned32 | read-only | current |
| cLApMemoryAverageUsage OBJECT-TYPE This object represents the percent of average memory usage of the access point. The statistics window is defined by clsSysStatisticsInterval. | 1.3.6.1.4.1.9.9.513.1.1.1.1.56 | Unsigned32 | read-only | current |
| cLApCpuCurrentUsage OBJECT-TYPE This object represents the percent of current CPU usage of the access point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.57 | Unsigned32 | read-only | current |
| cLApCpuAverageUsage OBJECT-TYPE This object represents the percent of average CPU usage of the access point. The statistics window is defined by clsSysStatisticsInterval. | 1.3.6.1.4.1.9.9.513.1.1.1.1.58 | Unsigned32 | read-only | current |
| cLApUpgradeFromVersion OBJECT-TYPE This object represents the AP image upgrade from version. | 1.3.6.1.4.1.9.9.513.1.1.1.1.59 | SnmpAdminString | read-only | current |
| cLApUpgradeToVersion OBJECT-TYPE This object represents the AP image upgrade to version. | 1.3.6.1.4.1.9.9.513.1.1.1.1.60 | SnmpAdminString | read-only | current |
| cLApUpgradeFailureCause OBJECT-TYPE This object represents the cause of the AP image upgrade failure. | 1.3.6.1.4.1.9.9.513.1.1.1.1.61 | SnmpAdminString | read-only | current |
| cLApMaxClientLimitNumberTrap OBJECT-TYPE This object represents the max client limit number. | 1.3.6.1.4.1.9.9.513.1.1.1.1.62 | Unsigned32 | read-only | current |
| cLApMaxClientLimitCause OBJECT-TYPE This object represents the cause of the max client limit reach. | 1.3.6.1.4.1.9.9.513.1.1.1.1.63 | SnmpAdminString | read-only | current |
| cLApMaxClientLimitSet OBJECT-TYPE This object represents whether this event is raised or cleared. A value of 'true' indicates this event is set. A value of 'false' indicates this even is cleared. | 1.3.6.1.4.1.9.9.513.1.1.1.1.64 | TruthValue | read-only | current |
| cLApFloorLabel OBJECT-TYPE This object specifies the floor label for the Access Point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.65 | Unsigned64 | read-write | current |
| cLApConnectCount OBJECT-TYPE This object represents the Count of AP's that are connected to the Controller. | 1.3.6.1.4.1.9.9.513.1.1.1.1.66 | Unsigned32 | read-only | deprecated |
| cLApReassocSuccCount OBJECT-TYPE This object represents the successful re-association count for the Access Point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.67 | Counter32 | read-only | current |
| cLApReassocFailCount OBJECT-TYPE This object represents the failed re-association count for the Access Point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.68 | Counter32 | read-only | current |
| cLAdjChannelRogueEnabled OBJECT-TYPE This object specifies if rogue AP detection and removed Traps need to be sent. A value of 'true' indicates adjacent rogue detection is enabled. A value of 'false' indicates adjacent rogue detection is disabled. To Enable this trap it is requested to disable the bsnRogueAPTrapEnable in order to avoid the duplicates. | 1.3.6.1.4.1.9.9.513.1.1.1.1.69 | TruthValue | read-write | deprecated |
| cLApAssocFailCountByRate OBJECT-TYPE This object represents the failed association count for the access point caused by rate mismatch. | 1.3.6.1.4.1.9.9.513.1.1.1.1.70 | Unsigned32 | read-only | current |
| cLApAbnormalOfflineCount OBJECT-TYPE This object represents the abnormal offline count for the access point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.71 | Unsigned32 | read-only | current |
| cLApActiveClientCount OBJECT-TYPE This object represents the active client number for the access point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.72 | Unsigned32 | read-only | current |
| cLApAssocFailCountForRssiLow OBJECT-TYPE This object represents the failed association count for the access point caused by RSSI low. | 1.3.6.1.4.1.9.9.513.1.1.1.1.73 | Unsigned32 | read-only | current |
| cLApSysNetId OBJECT-TYPE This object specifies the ApSysNetId which is the numeric string to identify the system information like ApName. | 1.3.6.1.4.1.9.9.513.1.1.1.1.74 | SnmpAdminString | read-write | current |
| cLApAssocFailTimes OBJECT-TYPE This object represents the counts of client failed association to the access point. | 1.3.6.1.4.1.9.9.513.1.1.1.1.75 | Counter32 | read-only | current |
| cLApAntennaBandMode OBJECT-TYPE This object specifies the mode of antenna band. notApplicable - will return for unsuppported APs. single - configure the AP to use single band for antenna. dual - configure the AP to use both bands for antenna. | 1.3.6.1.4.1.9.9.513.1.1.1.1.76 | INTEGER {notApplicable(1), single(2), dual(3)} | read-write | current |
| cLApHeartBeatRspAvgTime OBJECT-TYPE This object represents the average interval between sending the echo request and receiving the echo response in AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.77 | Integer32 (1..100000) | read-only | current |
| cLApEchoRequestCount OBJECT-TYPE This object represents the echo request packet count sent from AP to access controller. | 1.3.6.1.4.1.9.9.513.1.1.1.1.78 | Counter32 | read-only | current |
| cLApEchoResponseLossCount OBJECT-TYPE This object represents the echo response loss count from access controller to AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.79 | Counter32 | read-only | current |
| cLApModuleInserted OBJECT-TYPE This object represents the type of the module inserted in to the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.80 | SnmpAdminString | read-only | current |
| cLApEnableModule OBJECT-TYPE This object specifies the status of the external module . A value of 'true' indicates module is enabled. A value of 'false' indicates module is disabled. | 1.3.6.1.4.1.9.9.513.1.1.1.1.81 | TruthValue | read-write | current |
| cLApIsUniversal OBJECT-TYPE This object represents the if the AP is universal AP. A value of 'true' indicates AP is universal SKU based AP. A value of 'false' indicates AP is non-Universal SKU AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.82 | TruthValue | read-only | current |
| cLApUniversalPrimeStatus OBJECT-TYPE This object represents the method of Priming of the Universal AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.83 | SnmpAdminString | read-only | current |
| cLApIsMaster OBJECT-TYPE This object represents whether the flex AP is a master AP. This applies only to FlexExpress controllers. A value of 'true' indicates AP is a master AP. A value of 'false' indicates AP is not a master AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.84 | TruthValue | read-only | current |
| cLApBleFWDownloadStatus OBJECT-TYPE This object represents the list of APs in which BLE firmware download is in progress. A value of 'true' indicates BLE download is in progress. A value of 'false' indicates BLE download is not in progress. | 1.3.6.1.4.1.9.9.513.1.1.1.1.85 | TruthValue | read-only | current |
| cLApDot11XorDartConnectorStatus OBJECT-TYPE This object represents the XOR dart connector status. | 1.3.6.1.4.1.9.9.513.1.1.1.1.86 | SnmpAdminString | read-only | current |
| cLApCtsSxpDefaultPassword OBJECT-TYPE This object specifies the SXP(Security Group Tag Exchange Protocol) default password. | 1.3.6.1.4.1.9.9.513.1.1.1.1.87 | SnmpAdminString | read-write | current |
| cLApCtsSxpState OBJECT-TYPE This object specifies SXP(Security Group Tag Exchange Protocol) state. A value of 'true' indicates sxp state is enabled. A value of 'false' indicates sxp state is disabled. | 1.3.6.1.4.1.9.9.513.1.1.1.1.88 | TruthValue | read-write | current |
| cLApCtsSxpMode OBJECT-TYPE This object specifies SXP(Security Group Tag Exchange Protocol) mode. A value of 'true' indicates sxp mode is enabled. A value of 'false' indicates sxp mode is disabled. | 1.3.6.1.4.1.9.9.513.1.1.1.1.89 | TruthValue | read-write | current |
| cLApCtsSxpListenerMinHoldtime OBJECT-TYPE This object specifies SXP(Security Group Tag Exchange Protocol) listener hold time. It specifies the global maximum hold-time for SXP connections in 'listener' mode. Value of this object must be lesser than cLApCtsSxpListenerMinHoldTime. | 1.3.6.1.4.1.9.9.513.1.1.1.1.90 | Unsigned32 | read-write | current |
| cLApCtsSxpListenerMaxHoldtime OBJECT-TYPE This object specifies SXP(Security Group Tag Exchange Protocol) listener hold time. It specifies the global maximum hold-time for SXP connections in 'listener' mode. Value of this object must be greater than cLApCtsSxpListenerMinHoldTime. | 1.3.6.1.4.1.9.9.513.1.1.1.1.91 | Unsigned32 | read-write | current |
| cLApCtsSxpReconcilePeriod OBJECT-TYPE This object specifies SXP(Security Group Tag Exchange Protocol) reconcile period. | 1.3.6.1.4.1.9.9.513.1.1.1.1.92 | Unsigned32 | read-write | current |
| cLApCtsSxpRetryPeriod OBJECT-TYPE This object specifies SXP(Security Group Tag Exchange Protocol) retry period. | 1.3.6.1.4.1.9.9.513.1.1.1.1.93 | Unsigned32 | read-write | current |
| cLApCtsSxpSpeakerHoldTime OBJECT-TYPE This object specifies SXP(Security Group Tag Exchange Protocol) speaker hold time. | 1.3.6.1.4.1.9.9.513.1.1.1.1.94 | Unsigned32 | read-write | current |
| cLApCtsSxpSpeakerKeepAlive OBJECT-TYPE This object specifies SXP(Security Group Tag Exchange Protocol) speaker keep alive time. | 1.3.6.1.4.1.9.9.513.1.1.1.1.95 | Unsigned32 | read-write | current |
| cLApCtsInlineTagStatus OBJECT-TYPE This object specifies Cisco Trustsec inline tagging is enabled/disabled. A value 'true' indicates inline tag is enabled. A value 'false' indicates inline tag is disabled. | 1.3.6.1.4.1.9.9.513.1.1.1.1.96 | TruthValue | read-write | current |
| cLApCtsSgaclStatus OBJECT-TYPE This object specifies Cisco Trustsec Security Group Tag ACL enforcement status. A value 'true' indicates SgACL enforcement is enabled A value 'false' indicates SgACL enforcement is disabled | 1.3.6.1.4.1.9.9.513.1.1.1.1.97 | TruthValue | read-write | current |
| cLApCtsOverrideStatus OBJECT-TYPE This object specifies Cisco Trustsec AP Override status. A value of 'true' indicates CTS AP Override is enabled. A value of 'false' indicates CTS AP Override is disabled. | 1.3.6.1.4.1.9.9.513.1.1.1.1.98 | TruthValue | read-write | current |
| cLApModeClear OBJECT-TYPE This object specifies to clear the modes like 'Sniffer', 'Monitor' which is not inherited from tag configuration on controller. Once cleared, AP may reboot and move to the AP mode based on current tag configuration. A value of 'true' indicates AP mode is cleared A value of 'false' indicates AP mode is set | 1.3.6.1.4.1.9.9.513.1.1.1.1.103 | TruthValue | read-write | current |
| cLApSiteTagName OBJECT-TYPE This object specifies the site tag name of the AP | 1.3.6.1.4.1.9.9.513.1.1.1.1.104 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| cLApRfTagName OBJECT-TYPE This object specifies the RF tag name of the AP | 1.3.6.1.4.1.9.9.513.1.1.1.1.105 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| cLApPolicyTagName OBJECT-TYPE This object specifies the policy tag name of the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.106 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| cLApTagSource OBJECT-TYPE This object specifies the source of the tag. | 1.3.6.1.4.1.9.9.513.1.1.1.1.107 | INTEGER {none(1), static(2), filterengine(3), pnpserver(4), default(5), location(6)} | read-only | current |
| cLApUsbModuleName OBJECT-TYPE This object specifies module name of USB module On the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.108 | SnmpAdminString (SIZE(0..66)) | read-only | current |
| cLApUsbModuleState OBJECT-TYPE This object specifies whether USB module detected or not detected on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.109 | SnmpAdminString (SIZE(0..66)) | read-only | current |
| cLApUsbModuleProductId OBJECT-TYPE This object specifies product Id of USB module on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.110 | SnmpAdminString (SIZE(0..19)) | read-only | current |
| cLApUsbDescription OBJECT-TYPE This object specifies description of USB module on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.111 | SnmpAdminString (SIZE(0..66)) | read-only | current |
| cLApUsbStateInfo OBJECT-TYPE This object specifies State(enable/disable) of USB module on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.112 | TruthValue | read-write | current |
| cLApUsbOverride OBJECT-TYPE This object specifies Override(enable/disable) of USB module on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.113 | TruthValue | read-write | current |
| cLApUsbSerialNumber OBJECT-TYPE This object specifies serial number of USB module on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.114 | SnmpAdminString (SIZE(0..12)) | read-only | current |
| cLApUsbMaxPower OBJECT-TYPE This object specifies max power given to USB module on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.115 | Unsigned32 | read-only | current |
| cLApLagConfigStatus OBJECT-TYPE This object specifies the configured LAG status(enable/disable) on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.116 | TruthValue | read-only | current |
| cLApMonitorModeOptStatus OBJECT-TYPE This object specifies the Monitor Mode optimization support(enable/disable) on the AP. | 1.3.6.1.4.1.9.9.513.1.1.1.1.117 | TruthValue | read-only | current |
| cLApFilterName OBJECT-TYPE This object specifies the Filter name applied on this AP | 1.3.6.1.4.1.9.9.513.1.1.1.1.118 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| cLApIfSmtParamTable OBJECT-TYPE This table represents the station management information in the APs that have joined the controller. Information populated through the entries of this table is used by the AP to perform the expected 802.11 operations on the respective dot11 interfaces to coordinate with other 802.11 devices in the network. Since this table has the indices defined in the tables cLApTable and cLApDot11IfTable, an entry in this table is automatically removed when the respective entry is removed in either of those tables. | 1.3.6.1.4.1.9.9.513.1.1.2 | not-accessible | current | |
| cLApIfSmtParamEntry OBJECT-TYPE An entry in this table represents the information pertaining to one particular dot11 interface of this AP used to perform the 802.11 protocol operations on the respective dot11 interface. Rows are added or deleted to this table when APs join or leave the controller respectively. | 1.3.6.1.4.1.9.9.513.1.1.2.1 | not-accessible | current | |
| cLApIfSmtDot11Bssid OBJECT-TYPE This object represents the base BSSID of this AP, which is the MAC address of the radio interface of this AP. | 1.3.6.1.4.1.9.9.513.1.1.2.1.1 | MacAddress | read-only | current |
| cLApCountryTable OBJECT-TYPE This table represents the country settings for the 802.11 LWAPP Access Points that have joined the controller. An entry is automatically added by the controller when a Access Point joins the controller. The entry is removed when Access Point disasscociates from the controller. | 1.3.6.1.4.1.9.9.513.1.1.3 | not-accessible | current | |
| cLApCountryEntry OBJECT-TYPE Each entry in this table provides country setting about one 802.11 LWAPP Access Point that has joined the controller. Entries are removed when the APs lose their association with the controller due to loss of communication. | 1.3.6.1.4.1.9.9.513.1.1.3.1 | not-accessible | current | |
| cLApCountryCode OBJECT-TYPE This object specifies the country in which the AP is operating. This value is the 3 letter country code. | 1.3.6.1.4.1.9.9.513.1.1.3.1.1 | SnmpAdminString (SIZE(1..255)) | read-write | current |
| cLApCountryAllowed OBJECT-TYPE This object represents the country in which the AP is operating. This value is a list of country codes sperated by comma. | 1.3.6.1.4.1.9.9.513.1.1.3.1.2 | SnmpAdminString (SIZE(1..255)) | read-only | current |
| ciscoLwappApIfRegulatoryDomainMismatchNotifEnabled OBJECT-TYPE The object to control the generation of ciscoLwappApIfRegulatoryDomainMismatchNotif notification. A value of 'true' indicates that the agent generates ciscoLwappApIfRegulatoryDomainMismatchNotif notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappApIfRegulatoryDomainMismatchNotif notification. | 1.3.6.1.4.1.9.9.513.1.1.4 | TruthValue | read-write | current |
| ciscoLwappApCrashEnabled OBJECT-TYPE The object to control the generation of ciscoLwappApCrash notification. A value of 'true' indicates that the agent generates ciscoLwappApCrash notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappApCrash notification. | 1.3.6.1.4.1.9.9.513.1.1.5 | TruthValue | read-write | current |
| ciscoLwappApUnsupportedEnabled OBJECT-TYPE The object to control the generation of ciscoLwappApUnsupported notification. A value of 'true' indicates that the agent generates ciscoLwappApUnsupported notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappApUnsupported notification. | 1.3.6.1.4.1.9.9.513.1.1.6 | TruthValue | read-write | current |
| ciscoLwappApAssociatedEnabled OBJECT-TYPE The object to control the generation of ciscoLwappApAssociated notification. A value of 'true' indicates that the agent generates ciscoLwappApAssociated notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappApAssociated notification. | 1.3.6.1.4.1.9.9.513.1.1.7 | TruthValue | read-write | current |
| cLApCrashInfoTable OBJECT-TYPE This table represents the crash file information for each AP. An entry is automatically added to this table when an Access Points crashes and reboots. Entry is removed from this table when AP disassociates from the controllers. | 1.3.6.1.4.1.9.9.513.1.1.8 | not-accessible | current | |
| cLApCrashInfoEntry OBJECT-TYPE Each entry in this table provides crash information available for each AP. | 1.3.6.1.4.1.9.9.513.1.1.8.1 | not-accessible | current | |
| cLApCrashFileName OBJECT-TYPE This object represents the crash file name for a specific AP. | 1.3.6.1.4.1.9.9.513.1.1.8.1.1 | SnmpAdminString (SIZE(1..28)) | read-only | current |
| cLApCrashFileSize OBJECT-TYPE This object represents the size of the crash file. | 1.3.6.1.4.1.9.9.513.1.1.8.1.2 | Unsigned32 | read-only | current |
| cLApCrashFileTimeStamp OBJECT-TYPE This object represents the timestamp of the crash file. | 1.3.6.1.4.1.9.9.513.1.1.8.1.3 | DateAndTime | read-only | current |
| cLApSysInfoTable OBJECT-TYPE This table represents the system information for each AP. | 1.3.6.1.4.1.9.9.513.1.1.9 | not-accessible | current | |
| cLApSysInfoEntry OBJECT-TYPE Each entry in this table provides system information for each AP. | 1.3.6.1.4.1.9.9.513.1.1.9.1 | not-accessible | current | |
| cLApSysMemType OBJECT-TYPE This object represents the AP system memory type. | 1.3.6.1.4.1.9.9.513.1.1.9.1.1 | SnmpAdminString | read-only | current |
| cLApSysMemSize OBJECT-TYPE This object represents the total AP system memory size in Kbytes. | 1.3.6.1.4.1.9.9.513.1.1.9.1.2 | Unsigned32 | read-only | current |
| cLApSysFlashSize OBJECT-TYPE This object represents the AP flash size in Kbytes. | 1.3.6.1.4.1.9.9.513.1.1.9.1.3 | Unsigned32 | read-only | current |
| cLApSysCpuType OBJECT-TYPE This object represents the AP cpu type | 1.3.6.1.4.1.9.9.513.1.1.9.1.4 | SnmpAdminString | read-only | current |
| cLApSysFlashType OBJECT-TYPE This object represents the AP Flash type. | 1.3.6.1.4.1.9.9.513.1.1.9.1.5 | SnmpAdminString | read-only | current |
| cLApExtTable OBJECT-TYPE This table represents the system information for each AP. | 1.3.6.1.4.1.9.9.513.1.1.10 | not-accessible | current | |
| cLApExtEntry OBJECT-TYPE Each entry in this table provides system information for each AP. | 1.3.6.1.4.1.9.9.513.1.1.10.1 | not-accessible | current | |
| cLApLEDFlashStatus OBJECT-TYPE This object specifies the state of the AP LED Flash. A value of 'true' indicates LED flash is enabled. A value of 'false' indicates LED flash is disabled. | 1.3.6.1.4.1.9.9.513.1.1.10.1.1 | TruthValue | read-write | current |
| cLApLEDFlashDuration OBJECT-TYPE This object specifies the duration for which the AP's LED should blink. This is applicable when the value of cLApFlashStatus is TRUE. Value of 0 indicates the blinking for infinite duration. | 1.3.6.1.4.1.9.9.513.1.1.10.1.2 | Unsigned32 | read-write | current |
| cLApInetAddressType OBJECT-TYPE This object specifies the type of the AP address made available through cLApInetAddress. | 1.3.6.1.4.1.9.9.513.1.1.10.1.3 | InetAddressType | read-write | current |
| cLApInetAddress OBJECT-TYPE This object specifies the address of the Access Point. | 1.3.6.1.4.1.9.9.513.1.1.10.1.4 | InetAddress | read-write | current |
| cLApStaticIpv6AddressEnabled OBJECT-TYPE This object specifies that AP is configured to use static IPv6 address. A value of 'true' indicates AP can assign with static IP address. A value of 'false' indicates AP cannot assign with static IP address. | 1.3.6.1.4.1.9.9.513.1.1.10.1.5 | TruthValue | read-write | current |
| cLApStaticIpv6InetAddressType OBJECT-TYPE This object specified the address type made available through cLApStaticIpv6InetAddress. | 1.3.6.1.4.1.9.9.513.1.1.10.1.6 | InetAddressType | read-write | current |
| cLApStaticIpv6InetAddress OBJECT-TYPE This object specifies the static IPv6 address of the Access Point. | 1.3.6.1.4.1.9.9.513.1.1.10.1.7 | InetAddress | read-write | current |
| cLApStaticIpv6PrefixLength OBJECT-TYPE This object specifies the prefix length of the static IP Address configured on the AP. | 1.3.6.1.4.1.9.9.513.1.1.10.1.8 | Unsigned32 (0..128) | read-write | current |
| cLApStaticIpv6GatewayInetAddressType OBJECT-TYPE This object specified the address type made available through cLApStaticIpv6GatewayInetAddress. | 1.3.6.1.4.1.9.9.513.1.1.10.1.9 | InetAddressType | read-write | current |
| cLApStaticIpv6GatewayInetAddress OBJECT-TYPE This object specifies the IPv6 Address of the Gateway server. This attribute can be configured only if the static IP option is turned on in the AP. | 1.3.6.1.4.1.9.9.513.1.1.10.1.10 | InetAddress | read-write | current |
| cLApStaticIpNetmaskType OBJECT-TYPE This object specifies the netmask address type for AP's static IP. | 1.3.6.1.4.1.9.9.513.1.1.10.1.11 | InetAddressType | read-write | current |
| cLApStaticIpNetmask OBJECT-TYPE This object specifies netmask for ipv4 address. | 1.3.6.1.4.1.9.9.513.1.1.10.1.12 | InetAddress | read-write | current |
| cLApPreferMode OBJECT-TYPE This object represents the capwap prefer-mode (ipv4 or ipv6) of AP. | 1.3.6.1.4.1.9.9.513.1.1.10.1.13 | INTEGER {ipv4(1), ipv6(2)} | read-only | current |
| cLApPreferModeApplied OBJECT-TYPE This object represents the prefer-mode of AP applied by apgroup config or global config. apgroup - capwap prefer mode applied at ap group level. global - capwap prefer mode applied globally. | 1.3.6.1.4.1.9.9.513.1.1.10.1.14 | INTEGER {apgroup(1), global(2)} | read-only | current |
| cLApIndoorMode OBJECT-TYPE This object specifies the indoor/outdoor mode of the AP. A value of 'true' indicates AP is in Indoor Mode. A value of 'false' indicates AP is in Outdoor Mode. | 1.3.6.1.4.1.9.9.513.1.1.10.1.17 | TruthValue | read-write | current |
| cLApEnvInfoTable OBJECT-TYPE This table represents information about temperature degree state and orientation of the AP | 1.3.6.1.4.1.9.9.513.1.1.11 | not-accessible | current | |
| cLApEnvInfoEntry OBJECT-TYPE Each entry represents a conceptual row in this table. An entry is created when AP joins the controller. The entry is removed when the AP lose their association with the controller due to loss of communication with controller or when a AP is reset. | 1.3.6.1.4.1.9.9.513.1.1.11.1 | not-accessible | current | |
| cLApEnvTemperatureDegree OBJECT-TYPE This object represents temperature of the AP in both celcius and fahrenheit. | 1.3.6.1.4.1.9.9.513.1.1.11.1.1 | SnmpAdminString | read-only | current |
| cLApEnvTemperatureState OBJECT-TYPE This object represents temperature state of the AP. | 1.3.6.1.4.1.9.9.513.1.1.11.1.2 | INTEGER {unknown(0), green(1), yellow(2), red(3)} | read-only | current |
| cLApEnvOrientation OBJECT-TYPE This object represents orientation of the AP. | 1.3.6.1.4.1.9.9.513.1.1.11.1.3 | INTEGER {unknown(0), vertical(1), horizontal(2)} | read-only | current |
| cLApEnvPoeOutStatus OBJECT-TYPE This object represents POE out status of the AP. | 1.3.6.1.4.1.9.9.513.1.1.11.1.4 | INTEGER {unknown(1), on(2), off(3)} | read-only | current |
| cLApGpsInfoTable OBJECT-TYPE This table represents information about location and velocity parameters received from the GPS module on the LWAPP Access Points that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.1.12 | not-accessible | current | |
| cLApGpsInfoEntry OBJECT-TYPE Each entry represents a conceptual row in this table. An entry is created when AP joins the controller. The entry is removed when the AP lose their association with the controller due to loss of communication with controller | 1.3.6.1.4.1.9.9.513.1.1.12.1 | not-accessible | current | |
| cLApGpsLocationPresent OBJECT-TYPE This object represents whether the access point has the GPS module installed or not. A value of 'true' indicates GPS module is present in AP. A value of 'false' indicates GPS module is not present in AP. | 1.3.6.1.4.1.9.9.513.1.1.12.1.1 | TruthValue | read-only | current |
| cLApGpsLocationValid OBJECT-TYPE This object represents whether the location information is valid or not. A value of 'true' indicates GPS location is valid. A value of 'false' indicates GPS location is not valid. | 1.3.6.1.4.1.9.9.513.1.1.12.1.2 | TruthValue | read-only | current |
| cLApGpsLatitude OBJECT-TYPE This object represents latitude information in the GPS data received. | 1.3.6.1.4.1.9.9.513.1.1.12.1.3 | SnmpAdminString | read-only | current |
| cLApGpsLongitude OBJECT-TYPE This object represents longitude information in the GPS data received. | 1.3.6.1.4.1.9.9.513.1.1.12.1.4 | SnmpAdminString | read-only | current |
| cLApGpsAltitude OBJECT-TYPE This object represents altitude information in the GPS data received. | 1.3.6.1.4.1.9.9.513.1.1.12.1.5 | SnmpAdminString | read-only | current |
| cLApGpsCollectionTime OBJECT-TYPE This object represents the time when GPS data was collected. | 1.3.6.1.4.1.9.9.513.1.1.12.1.6 | TimeStamp | read-only | current |
| ciscoLwappXorRadioRoleChangeEnabled OBJECT-TYPE The object to control the generation of ciscoLwappApXorRadioRoleChangeNotify notification. A value of 'true' indicates that the agent generates ciscoLwappApXorRadioRoleChangeNotify notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappApXorRadioRoleChangeNotify notification. | 1.3.6.1.4.1.9.9.513.1.1.13 | TruthValue | read-write | current |
| ciscoLwappApIf OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.2 | |||
| cLApDot11IfTable OBJECT-TYPE This table represents the information about the basic functional parameters corresponding to the dot11 interfaces of the APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.2.1 | not-accessible | current | |
| cLApDot11IfEntry OBJECT-TYPE An entry in this table represents the 802.11 functional parameters of the dot11 interface of an AP that has joined the controller. Entries are added when the APs associate to this controller and deleted when they lose their association. | 1.3.6.1.4.1.9.9.513.1.2.1.1 | not-accessible | current | |
| cLApDot11IfSlotId OBJECT-TYPE This object represents the slot ID of a dot11 interface on an AP. The slot ID for a particular dot11 interface as represented by this object ranges from 0 to cLApMaxNumberOfDot11Slots - 1. | 1.3.6.1.4.1.9.9.513.1.2.1.1.1 | Unsigned32 | not-accessible | current |
| cLApDot11IfType OBJECT-TYPE This object represents the type of this dot11 interface. | 1.3.6.1.4.1.9.9.513.1.2.1.1.2 | CLApIfType | read-only | current |
| cLApDot11IfRegDomain OBJECT-TYPE This object represents the regulatory domain for this radio type on this AP. | 1.3.6.1.4.1.9.9.513.1.2.1.1.3 | SnmpAdminString (SIZE(1..255)) | read-only | current |
| cLApDot11nSupport OBJECT-TYPE This objects represents whether 11n support is enabled on this radio. A value of 'true' indicates 11n support is enabled. A value of 'false' indicates 11n support is disabled. | 1.3.6.1.4.1.9.9.513.1.2.1.1.4 | TruthValue | read-only | current |
| cLAp11nChannelBandwidth OBJECT-TYPE This object specifies the channel bandwidth for this AP. This applies to 802.11n networks only. This has been deprecated for cLAp11ChannelBandwidth. | 1.3.6.1.4.1.9.9.513.1.2.1.1.5 | INTEGER {five(1), ten(2), twenty(3), forty(4)} | read-write | current |
| cLApLomEnabled OBJECT-TYPE This object indicates whether this AP is being monitored by the location server. A value of 'true' indicates that the monitoring is enabled. A value of 'false' indicates that the monitoring is disabled. | 1.3.6.1.4.1.9.9.513.1.2.1.1.6 | TruthValue | read-write | deprecated |
| cLApLomFirstChannel OBJECT-TYPE This object specifies the first location channel that is being monitored. | 1.3.6.1.4.1.9.9.513.1.2.1.1.7 | CLDot11Channel | read-write | current |
| cLApLomSecondChannel OBJECT-TYPE This object specifies the second location channel that is being monitored. | 1.3.6.1.4.1.9.9.513.1.2.1.1.8 | CLDot11Channel | read-write | current |
| cLApLomThirdChannel OBJECT-TYPE This object specifies the third location channel that is being monitored. | 1.3.6.1.4.1.9.9.513.1.2.1.1.9 | CLDot11Channel | read-write | current |
| cLApLomFourthChannel OBJECT-TYPE This object specifies the fourth location channel that is being monitored. | 1.3.6.1.4.1.9.9.513.1.2.1.1.10 | CLDot11Channel | read-write | current |
| cLApExtensionChannel OBJECT-TYPE This object specifies the extension channel. This is applicable when the channel bandwidth is set to 40mhz. | 1.3.6.1.4.1.9.9.513.1.2.1.1.11 | CLDot11Channel | read-only | deprecated |
| cLApLegacyBeamForming OBJECT-TYPE This object indicates the status of legacy beam forming in this AP. This object is applicable only for 11n supported APs. For APs that does not support legacy beam forming, a get request on this attribute will return the value 'notApplicable'. A value of 'enable' indicates that the legacy Beam forming is enabled in this AP. A value of 'false' indicates that the legacy Beam forming is disabled in this AP. | 1.3.6.1.4.1.9.9.513.1.2.1.1.12 | INTEGER {enable(1), disable(2), notApplicable(3)} | read-write | current |
| cLApCdpOverAirEnabled OBJECT-TYPE This object specifies the status of Cisco Discovery Protocol(CDP) in this interface, represented by cLApDot11IfSlotId of the AP, represented by cLApSysMacAddress. A value of 'true' indicates that CDP is enabled in the dot11 interface(s) of this AP. A value of 'false' indicates that CDP is disabled in the dot11 interface(s) of this AP. | 1.3.6.1.4.1.9.9.513.1.2.1.1.13 | TruthValue | read-write | current |
| cLApDot11IfAdminStatus OBJECT-TYPE This object specifies the AP's interface admin status. A value of 'true' indicates admin state is up. A value of 'false' indicates admin state is down. | 1.3.6.1.4.1.9.9.513.1.2.1.1.14 | TruthValue | read-write | current |
| cLApDot11IfLinkChangeCount OBJECT-TYPE This object represents the link change count of a dot11 interface on an AP. | 1.3.6.1.4.1.9.9.513.1.2.1.1.15 | Unsigned32 | read-only | current |
| cLApDot11MaxClients OBJECT-TYPE This object specifies the max supported associated clients of a dot11 interface on an AP. | 1.3.6.1.4.1.9.9.513.1.2.1.1.16 | Unsigned32 (1..200) | read-write | current |
| cLApPromiscuousModeDwelling OBJECT-TYPE This object represents the percentage of time for the dot11 interface of an Access Point spent in promiscuous mode dwelling. | 1.3.6.1.4.1.9.9.513.1.2.1.1.17 | Unsigned32 | read-only | current |
| cLApDot11IfStaKeepingTime OBJECT-TYPE This object represents the time in hundredths of a second since the last dot11 interface state changed. | 1.3.6.1.4.1.9.9.513.1.2.1.1.18 | TimeTicks | read-only | current |
| cLApDot11IfLinkSpeed OBJECT-TYPE This object represents the speed of the interface in units of 1,000,000 bits per second. | 1.3.6.1.4.1.9.9.513.1.2.1.1.19 | Gauge32 | read-only | current |
| cLApDot11IfMtu OBJECT-TYPE This object represents interface's MTU value. | 1.3.6.1.4.1.9.9.513.1.2.1.1.20 | Unsigned32 | read-only | current |
| cLApDot11IfDesc OBJECT-TYPE This object represents the description of this interface. | 1.3.6.1.4.1.9.9.513.1.2.1.1.21 | SnmpAdminString | read-only | current |
| cLApDot11acSupport OBJECT-TYPE This objects represents whether 802.11ac support is enabled on this AP. A value of 'true' indicates 11ac support for slot is enabled. A value of 'false' indicates 11ac support for slot is disabled. | 1.3.6.1.4.1.9.9.513.1.2.1.1.22 | TruthValue | read-only | current |
| cLAp11ChannelBandwidth OBJECT-TYPE This object specifies the channel bandwidth for this AP. This applies to 802.11n and 802.11ac networks only. | 1.3.6.1.4.1.9.9.513.1.2.1.1.23 | INTEGER {five(1), ten(2), twenty(3), fourty(4), eighty(5), onesixty(6), eightyeighty(7)} | read-write | current |
| cLApExtensionChannels OBJECT-TYPE This object represents the extension channels separated by commas. This is applicable when the channel bandwidth is set to 40mhz or 80mhz. | 1.3.6.1.4.1.9.9.513.1.2.1.1.24 | SnmpAdminString | read-only | current |
| cLAPDot11IfMinTxPowerStep OBJECT-TYPE This object represents minimum adjust step of the AP radio TX power. The power step is coded as an unsigned integer in units of dbm. | 1.3.6.1.4.1.9.9.513.1.2.1.1.25 | Unsigned32 | read-only | current |
| cLApDot11XorRadioMode OBJECT-TYPE This object specifies the radio mode for the AP which has XOR radio. servingClients - xor radio is configured to serve the clients (local/flexconnect/bridge). monitor -xor radio is configured to operate in monitor mode. sensor - xor radio is configured to operate in sensor mode. | 1.3.6.1.4.1.9.9.513.1.2.1.1.26 | INTEGER {servingClients(1), monitor(2), sensor(3)} | read-write | current |
| cLApDot11XorRadioBand OBJECT-TYPE This object specifies the operating band of the dot11 interface of an AP. radioband24G - operating band for xor radio is 2.4GHz. radioband5G - operating band for xor radio is 5GHz. radioband6G - operating band for xor radio is 6GHz | 1.3.6.1.4.1.9.9.513.1.2.1.1.27 | INTEGER {radioband24G(1), radioband5G(2), radioband6G(3)} | read-write | current |
| cLApDot11XorRadioRoleAssignment OBJECT-TYPE This object specifies the radio role assignment of XOR radio. auto - xor radio configured to change band/mode automatically. manual - xor radio's band/mode can be configured manually. | 1.3.6.1.4.1.9.9.513.1.2.1.1.28 | INTEGER {auto(1), manual(2)} | read-write | current |
| cLApDot11IfMaxDataRate OBJECT-TYPE This object represents the maximum data rate of a dot11 interface on an AP in Mbps. | 1.3.6.1.4.1.9.9.513.1.2.1.1.29 | Unsigned32 | read-only | current |
| cLApDot11IfSensorReachability OBJECT-TYPE This object represents sensor radio's ability to cover localized RF neighbors.It represents value in percentage which shows percentage of neighbors covered by this sensor. | 1.3.6.1.4.1.9.9.513.1.2.1.1.30 | Unsigned32 | read-only | current |
| cLApDot11axSupport OBJECT-TYPE This objects represents whether 802.11ax support is enabled on this AP. A value of 'true' indicates 11ax support for slot is enabled. A value of 'false' indicates 11ax support for slot is disabled. | 1.3.6.1.4.1.9.9.513.1.2.1.1.31 | TruthValue | read-only | current |
| cLApFraCoverageOverlapFactor OBJECT-TYPE This object represents the COF(Coverage Overlap Factor) in percentage.COF represents overlap on a given radio's transmit cell size by its adjacent neighbors.When COF value is higher than FRA(Flexible Radio Assignment) sensitivity, given radio will be most likely marked as redundant by FRA algorithm. | 1.3.6.1.4.1.9.9.513.1.2.1.1.32 | Integer32 | read-only | current |
| cLApFraSuggestedMode OBJECT-TYPE This object represents the band/mode XOR radio can move to, for better performance. static - XOR radio's band/mode is in manual assignment. none - FRA(Flexible Radio Assignment) algorithm is disabled. radioBand5GMonitor - FRA suggested mode/band is 5GHz or Monitor role. radioBand24G - XOR radio is not redundant. notApplicable - Radio is not XOR. | 1.3.6.1.4.1.9.9.513.1.2.1.1.33 | INTEGER {static(1), none(2), radioBand5GMonitor(3), radioBand24G(4), notApplicable(5)} | read-only | current |
| cLApDot11IfDualRadioMode OBJECT-TYPE This object represents dual radio mode status of radio enabled - Dual radio mode is enabled. disabled- Dual radio mode is disabled. None - Radio is not dual radio mode capable. | 1.3.6.1.4.1.9.9.513.1.2.1.1.34 | INTEGER {none(1), enabled(2), disabled(3)} | read-write | deprecated |
| cLApDot11IfDualRadioCapable OBJECT-TYPE This object represents whether radio is dual radio capable or not | 1.3.6.1.4.1.9.9.513.1.2.1.1.35 | INTEGER {notcapable(0), dualmodecapable(1)} | read-only | deprecated |
| cLApDot11IfRadioFRACapable OBJECT-TYPE This object represents whether radio is FRA capable or not. | 1.3.6.1.4.1.9.9.513.1.2.1.1.36 | INTEGER {notcapable(0), capable(1)} | read-only | deprecated |
| cLApDot11IfPhyS80EightyChannelNumber OBJECT-TYPE Secondary 80MHz channel number of the AP Interface. Allowed channel numbers also depends on the current Country Code set in the Switch. | 1.3.6.1.4.1.9.9.513.1.2.1.1.37 | INTEGER | read-write | current |
| cLApDot11IfDualRadioOperation OBJECT-TYPE This object represents dual radio mode operation of the slot. auto - Dual radio mode is automatic. manual - Dual radio mode is configurable manually. none - Radio is not dual radio mode capable. | 1.3.6.1.4.1.9.9.513.1.2.1.1.39 | INTEGER {none(1), auto(2), manual(3)} | read-write | deprecated |
| cLApDot11IfRadioRoleOperation OBJECT-TYPE This object represents the radio role operation of the slot. auto - Radio role assignment is automatic. manual - Radio role assignment is manual. | 1.3.6.1.4.1.9.9.513.1.2.1.1.40 | INTEGER {none(1), auto(2), manual(3)} | read-write | deprecated |
| cLApDot11IfRadioRole OBJECT-TYPE This object represents the role for the slot. local - The means the slot is capable of serving clients. monitor - The slot does not serves client, only monitors. | 1.3.6.1.4.1.9.9.513.1.2.1.1.41 | INTEGER {none(1), local(2), monitor(3)} | read-write | deprecated |
| cLApDot11IfRptncPresent OBJECT-TYPE This object represents whether Self Identifying Antenna RP-TNC is present for the radio. A value of 'true' indicates SIA RP-TNC is present. A value of 'false' indicates SIA RP-TNC is not present. | 1.3.6.1.4.1.9.9.513.1.2.1.1.42 | TruthValue | read-only | current |
| cLApDot11IfDartPresent OBJECT-TYPE This object represents whether Self Identifying Antenna DART is present for the radio A value of 'true' indicates SIA DART is present. A value of 'false' indicates SIA DART is not present. | 1.3.6.1.4.1.9.9.513.1.2.1.1.43 | TruthValue | read-only | current |
| cLApEthernetIfTable OBJECT-TYPE This table represents the information about the basic functional parameters corresponding to the Ethernet interfaces of the APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.2.2 | not-accessible | current | |
| cLApEthernetIfEntry OBJECT-TYPE An entry in this table represents the functional parameters of the Ethernet interface of an AP that has joined the controller. Entries are added when the APs associate to this controller and deleted when they lose their association. | 1.3.6.1.4.1.9.9.513.1.2.2.1 | not-accessible | current | |
| cLApEthernetIfSlotId OBJECT-TYPE This object represents the slot ID of an Ethernet interface on an AP. The slot ID for a particular Ethernet interface as represented by this object ranges from 0 to cLApMaxNumberOfEthernetSlots - 1. | 1.3.6.1.4.1.9.9.513.1.2.2.1.1 | Unsigned32 | not-accessible | current |
| cLApEthernetIfName OBJECT-TYPE This object represents the name of the ethernet interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.2 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| cLApEthernetIfMacAddress OBJECT-TYPE This object represents MAC address of the ethernet interface in the slot represented by cLApEthernetIfSlotId. | 1.3.6.1.4.1.9.9.513.1.2.2.1.3 | MacAddress | read-only | current |
| cLApEthernetIfAdminStatus OBJECT-TYPE This object specifies the admin state of the physical ethernet interface on the AP. up - Admin state of ethernet interface is up. down - Admin state of ethernet interface is down. | 1.3.6.1.4.1.9.9.513.1.2.2.1.4 | INTEGER {up(1), down(2)} | read-write | current |
| cLApEthernetIfOperStatus OBJECT-TYPE This object represents the operational state of the physical Ethernet interface on the AP. up - Operational state of ethernet interface is up. down - Operational state of ethernet interface is down. | 1.3.6.1.4.1.9.9.513.1.2.2.1.5 | INTEGER {up(1), down(2)} | read-only | current |
| cLApEthernetIfRxUcastPkts OBJECT-TYPE This object represents the total number of unicast packets received on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.6 | Counter32 | read-only | current |
| cLApEthernetIfRxNUcastPkts OBJECT-TYPE This object represents the total number of non-unicast or multicast packets received on the interface | 1.3.6.1.4.1.9.9.513.1.2.2.1.7 | Counter32 | read-only | current |
| cLApEthernetIfTxUcastPkts OBJECT-TYPE This object represents the total number of unicast packets transmitted on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.8 | Counter32 | read-only | current |
| cLApEthernetIfTxNUcastPkts OBJECT-TYPE This object represents the total number of non-unicast or multicast packets transmitted on the interface | 1.3.6.1.4.1.9.9.513.1.2.2.1.9 | Counter32 | read-only | current |
| cLApEthernetIfDuplex OBJECT-TYPE This object represents the interface's duplex mode | 1.3.6.1.4.1.9.9.513.1.2.2.1.10 | INTEGER {unknown(1), halfduplex(2), fullduplex(3), auto(4)} | read-only | current |
| cLApEthernetIfLinkSpeed OBJECT-TYPE This object represents the speed of the interface in units of 1,000,000 bits per second | 1.3.6.1.4.1.9.9.513.1.2.2.1.11 | Gauge32 | read-only | current |
| cLApEthernetIfPOEPower OBJECT-TYPE This object represents whether this interface supports Power Over Ethernet (POE) none - POE is not supported drawn - This interface supports POE, and power is being drawn notdrawn - POE power is not drawn | 1.3.6.1.4.1.9.9.513.1.2.2.1.12 | INTEGER {none(1), drawn(2), notdrawn(3)} | read-only | current |
| cLApEthernetIfRxTotalBytes OBJECT-TYPE This object represents the total number of bytes in the error-free packets received on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.13 | Counter32 | read-only | current |
| cLApEthernetIfTxTotalBytes OBJECT-TYPE This object represents the total number of bytes in the error-free packets transmitted on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.14 | Counter32 | read-only | current |
| cLApEthernetIfInputCrc OBJECT-TYPE This object represents the total number of CRC error in packets received on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.15 | Counter32 | read-only | current |
| cLApEthernetIfInputAborts OBJECT-TYPE This object represents the total number of packet aborted while receiving on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.16 | Counter32 | read-only | current |
| cLApEthernetIfInputErrors OBJECT-TYPE This object represents the sum of all errors in the packets while receiving on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.17 | Counter32 | read-only | current |
| cLApEthernetIfInputFrames OBJECT-TYPE This object represents the total number of packet received incorrectly having a CRC error and a noninteger number of octets on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.18 | Counter32 | read-only | current |
| cLApEthernetIfInputOverrun OBJECT-TYPE This object represents the number of times the receiver hardware was incapable of handing received data to a hardware buffer because the input rate exceeded the receiver's capability to handle the data. | 1.3.6.1.4.1.9.9.513.1.2.2.1.19 | Counter32 | read-only | current |
| cLApEthernetIfInputDrops OBJECT-TYPE This object represents the total number of packets dropped while receiving on the interface because the queue was full. | 1.3.6.1.4.1.9.9.513.1.2.2.1.20 | Counter32 | read-only | current |
| cLApEthernetIfInputResource OBJECT-TYPE This object represents the total number of resource errors in packets received on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.21 | Counter32 | read-only | current |
| cLApEthernetIfUnknownProtocol OBJECT-TYPE This object represents the total number of packet discarded on the interface due to unknown protocol. | 1.3.6.1.4.1.9.9.513.1.2.2.1.22 | Counter32 | read-only | current |
| cLApEthernetIfRunts OBJECT-TYPE This object represents the number of packets that are discarded because they are smaller than the medium's minimum packet size. | 1.3.6.1.4.1.9.9.513.1.2.2.1.23 | Counter32 | read-only | current |
| cLApEthernetIfGiants OBJECT-TYPE This object represents the number of packets that are discarded because they exceed the medium's maximum packet size. | 1.3.6.1.4.1.9.9.513.1.2.2.1.24 | Counter32 | read-only | current |
| cLApEthernetIfThrottle OBJECT-TYPE This object represents the total number of times the interface advised a sending NIC that it was overwhelmed by packets being sent and to slow the pace of delivery. | 1.3.6.1.4.1.9.9.513.1.2.2.1.25 | Counter32 | read-only | current |
| cLApEthernetIfResets OBJECT-TYPE This object represents number of times that an interface has been completely reset. | 1.3.6.1.4.1.9.9.513.1.2.2.1.26 | Counter32 | read-only | current |
| cLApEthernetIfOutputCollision OBJECT-TYPE This object represents the total number of packet retransmitted due to an Ethernet collision. | 1.3.6.1.4.1.9.9.513.1.2.2.1.27 | Counter32 | read-only | current |
| cLApEthernetIfOutputNoBuffer OBJECT-TYPE This object represents the total number of packets discarded because there was no buffer space. | 1.3.6.1.4.1.9.9.513.1.2.2.1.28 | Counter32 | read-only | current |
| cLApEthernetIfOutputResource OBJECT-TYPE This object represents the total number of resource errors in packets transmitted on the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.29 | Counter32 | read-only | current |
| cLApEthernetIfOutputUnderrun OBJECT-TYPE This object represents the number of times the transmitter has been running faster than the router can handle. | 1.3.6.1.4.1.9.9.513.1.2.2.1.30 | Counter32 | read-only | current |
| cLApEthernetIfOutputErrors OBJECT-TYPE This object represents sum of all errors that prevented the final transmission of packets out of the interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.31 | Counter32 | read-only | current |
| cLApEthernetIfOutputTotalDrops OBJECT-TYPE This object represents the total number of packets dropped while transmitting from the interface because the queue was full. | 1.3.6.1.4.1.9.9.513.1.2.2.1.32 | Counter32 | read-only | current |
| cLApEthernetIfCdpEnabled OBJECT-TYPE This object specifies the status of Cisco Discovery Protocol(CDP) in this interface represented by cLApEthernetIfSlotId of the AP represented by cLApSysMacAddress. A value of 'true' indicates that CDP is enabled in this interface. A value of 'false' indicates that CDP is disabled in this interface. | 1.3.6.1.4.1.9.9.513.1.2.2.1.33 | TruthValue | read-write | current |
| cLApEthernetIfMtu OBJECT-TYPE This object represents interface's MTU value | 1.3.6.1.4.1.9.9.513.1.2.2.1.34 | Unsigned32 | read-only | current |
| cLApEthernetIfType OBJECT-TYPE This object represents the type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention. | 1.3.6.1.4.1.9.9.513.1.2.2.1.35 | IANAifType | read-only | current |
| cLApEthernetIfLinkChangeCount OBJECT-TYPE This object represents the link change count of ethernet interface on the AP. | 1.3.6.1.4.1.9.9.513.1.2.2.1.36 | Counter32 | read-only | current |
| cLApDot11RadioTable OBJECT-TYPE This table represents the information about the basic functional parameters of the radios of the APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.2.3 | not-accessible | current | |
| cLApDot11RadioEntry OBJECT-TYPE An entry in this table represents the 802.11 functional parameters of the radio of an AP that has joined the controller. Entries are added when the APs associate to this controller and deleted when they lose their association. | 1.3.6.1.4.1.9.9.513.1.2.3.1 | not-accessible | current | |
| cLApDot11RadioMACAddress OBJECT-TYPE This object represents the base Mac address of the radio. | 1.3.6.1.4.1.9.9.513.1.2.3.1.1 | MacAddress | read-only | current |
| cLApDot11RadioSubBand OBJECT-TYPE This object reprsents the sub band on which this radio operates. | 1.3.6.1.4.1.9.9.513.1.2.3.1.2 | CLApDot11RadioSubband | read-only | current |
| cLApDot11RadioVersion OBJECT-TYPE This object represents the firmware version of the radio. | 1.3.6.1.4.1.9.9.513.1.2.3.1.3 | SnmpAdminString (SIZE(1..50)) | read-only | current |
| cLApDot11IsBackhaul OBJECT-TYPE This object represents whether this interface is backhaul radio or not. A value of 'true' indicates backhaul access for radio is enabled. A value of 'false' indicates backhaul access for radio is disabled. | 1.3.6.1.4.1.9.9.513.1.2.3.1.4 | TruthValue | read-only | current |
| cLApDot11RadioRole OBJECT-TYPE This object represents the role of the radio. | 1.3.6.1.4.1.9.9.513.1.2.3.1.5 | CLApDot11RadioRole | read-only | current |
| cLApDot11RadioMode OBJECT-TYPE This object represents the mode of the radio. local(1) : The default option. Serving WLAN clients and scanning channels for threats. monitor(2) : A monitor mode. AP spends all of its cycles scanning channels and looking for rogues. remote(3) : This mode indicates that AP is a remote edge lightweight access point. rogueDetector(4) : This mode monitors the rogue APs on wire. It does not transmit or receive frames over the air or contain rogue APs. sniffer(5) : The access point starts sniffing the air on a given channel. bridge(6) : This mode indicates that a root AP is connected. seConnect(7) : AP is connected to spectrum expert. The AP is able to perform spectrum intelligence. remoteBridge(8) : This mode indicates that AP is a remote lightweight access point with root AP connected. hybridRemote(9) : A mode for branch office and remote office deployment. sensor(10) : A sensor mode AP. | 1.3.6.1.4.1.9.9.513.1.2.3.1.6 | INTEGER {local(1), monitor(2), remote(3), rogueDetector(4), sniffer(5), bridge(6), seConnect(7), remoteBridge(8), hybridRemote(9), sensor(10)} | read-only | current |
| cLApDot11RadioSubType OBJECT-TYPE This object represents the subtype of the radio. main(1) :radio operates normally. rxOnly(2) :NOS radio type,which is explicitely used for monitor mode operation. slaveAc(3) :x-ale radio type is only for local mode. remoteLan(4) :Remote-LAN supported Slot. xorTxRx(5) :Xor radio capable of both TX and RX. bleTxRx(6) :radio operating normally and BLE is enabled for the AP. bleRxOnly(7) :radio is explicitly used for monitor mode operation and BLE is enabled for the AP. slave(8) :radio operating as slave. | 1.3.6.1.4.1.9.9.513.1.2.3.1.7 | INTEGER {main(1), rxOnly(2), slaveAc(3), remoteLan(4), xorTxRx(5), bleTxRx(6), bleRxOnly(7), slave(8)} | read-only | current |
| cLApDot11IfAntennaTable OBJECT-TYPE This table represents the information about the basic functional parameters corresponding to the antenna on dot11 interfaces of the APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.2.4 | not-accessible | current | |
| cLApDot11IfAntennaEntry OBJECT-TYPE An entry in this table represents the 802.11 functional parameters of the dot11 interface of an AP that has joined the controller. Entries are added when the APs associate to this controller and deleted when they lose their association. | 1.3.6.1.4.1.9.9.513.1.2.4.1 | not-accessible | current | |
| cLApDot11IfAntennaId OBJECT-TYPE This object represents the antenna ID of a dot11 interface on an AP. The antenna Id for a particular dot11 interface on a slot as represented by this object. | 1.3.6.1.4.1.9.9.513.1.2.4.1.1 | Unsigned32 (1..8) | not-accessible | current |
| cLApDot11IfAntennaTxEnable OBJECT-TYPE This object specifies whether this antenna is allowed to trasmit or not. A value of 'true' enables the antenna to transmit. A value of 'false' disables the antenna to transmit. This object has been deprecated for cLApDot11IfAntennaEnable. cLApDot11IfAntennaTxEnable object is superseded by cLApDot11IfAntennaEnable. | 1.3.6.1.4.1.9.9.513.1.2.4.1.2 | TruthValue | read-write | current |
| cLApDot11IfAntennaRxEnable OBJECT-TYPE This object specifies whether this antenna is allowed to recieve or not. A value of 'true' enables the antenna to receive. A value of 'false' disables the antenna to receive. cLApDot11IfAntennaRxEnable object is superseded by cLApDot11IfAntennaEnable. | 1.3.6.1.4.1.9.9.513.1.2.4.1.3 | TruthValue | read-write | current |
| cLApDot11IfAntennaEnable OBJECT-TYPE This object specifies whether this antenna is enabled or not. A value of 'true' indicates antenna is enabled. A value of 'false' indicates antenna is disabled. | 1.3.6.1.4.1.9.9.513.1.2.4.1.4 | TruthValue | read-write | current |
| cLApVlanIfTable OBJECT-TYPE This table represents the information about the basic functional parameters corresponding to the ethernet interfaces of the APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.2.5 | not-accessible | current | |
| cLApVlanIfEntry OBJECT-TYPE An entry in this table represents the VLAN functional parameters of the Ethernet interface of an AP that has joined the controller. Entries are added when the administrator creates an entry in this table. | 1.3.6.1.4.1.9.9.513.1.2.5.1 | not-accessible | current | |
| cLApVlanIfEthernetId OBJECT-TYPE This object represents the ID of a ethernet interface on an AP. | 1.3.6.1.4.1.9.9.513.1.2.5.1.1 | Unsigned32 (0..3) | not-accessible | current |
| cLApVlanIfMode OBJECT-TYPE This object specifies the AP's ethernet interface is configured for. normal - VLAN is not operating in access or trunk. access - VLAN is operating in access mode trunk - VLAN is operating in trunk mode. | 1.3.6.1.4.1.9.9.513.1.2.5.1.2 | INTEGER {normal(1), access(2), trunk(3)} | read-write | current |
| cLApVlanIfEnable OBJECT-TYPE This object specifies whether this interface is enabled or not. A value of 'true' enables the interface. A value of 'false' disables the interface.. This will delete all entries on this AP's ethernet interface. | 1.3.6.1.4.1.9.9.513.1.2.5.1.3 | TruthValue | read-write | current |
| cLApVlanIfNativeVlanId OBJECT-TYPE This object specifies the native VLAN ID assigned to this AP's ethernet interface. This only applies when the icLApVlanIfMode is set to 'trunk'. For all other modes this return a value of zero. | 1.3.6.1.4.1.9.9.513.1.2.5.1.4 | Unsigned32 | read-write | current |
| cLApVlanListTable OBJECT-TYPE This table represents the information about the basic functional parameters corresponding to the VLAN Ethernet interfaces of the APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.2.6 | not-accessible | current | |
| cLApVlanListEntry OBJECT-TYPE An entry in this table represents the VLAN functional parameters of the Ethernet interface of an AP that has joined the controller. Entries are added when the administrator creates an entry in this table. | 1.3.6.1.4.1.9.9.513.1.2.6.1 | not-accessible | current | |
| cLApVlanListVlanId OBJECT-TYPE This object represents the ID assigned to the VLAN on this AP's ethernet interface. | 1.3.6.1.4.1.9.9.513.1.2.6.1.1 | Unsigned32 | not-accessible | current |
| cLApVlanListRowStatus OBJECT-TYPE This object specifies to add or delete an entry in this table. | 1.3.6.1.4.1.9.9.513.1.2.6.1.2 | RowStatus | read-create | current |
| cLApDot11GlobalConfigTable OBJECT-TYPE This table represents the information about the global attributes of the radio interface, that would be applicable for all the APs that join the controller. | 1.3.6.1.4.1.9.9.513.1.2.7 | not-accessible | current | |
| cLApDot11GlobalConfigEntry OBJECT-TYPE An entry in this table represents the network level configurations of the radio interface. Entries cannot be added or deleted in this table. | 1.3.6.1.4.1.9.9.513.1.2.7.1 | not-accessible | current | |
| cLApNwLegacyBeamForming OBJECT-TYPE This object indicates the status of legacy beam forming in this AP. This object is applicable only for 11n supported APs. For APs that does not support legacy beam forming, a get request on this attribute will return the value 'notApplicable'. A value of 'enable' indicates that the legacy Beam forming is enabled in this AP. A value of 'false' indicates that the legacy Beam forming is disabled in this AP. | 1.3.6.1.4.1.9.9.513.1.2.7.1.1 | INTEGER {enable(1), disable(2), notApplicable(3)} | read-write | deprecated |
| cLApNwTxPowerThreshold OBJECT-TYPE This object specifies the Global AP Transmit Power Threshold value. The permissible range is -80 dbm to -50 dbm | 1.3.6.1.4.1.9.9.513.1.2.7.1.2 | Integer32 (-80..-50) | read-write | current |
| cLApNwTxPowerThresholdVer2 OBJECT-TYPE This object specifies the Global AP Transmit Power Threshold value when Inteference Optimal mode of Tx Power Control (TPC v2) is enabled. The permissible range is -80 dbm to -50 dbm | 1.3.6.1.4.1.9.9.513.1.2.7.1.3 | Integer32 (-80..-50) | read-write | current |
| cLApDot11RadioStatsTable OBJECT-TYPE This table represents the statistics information about the radios of the APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.2.8 | not-accessible | current | |
| cLApDot11RadioStatsEntry OBJECT-TYPE An entry in this table represents a statistics of the radio of an AP that has joined the conttroller. Entries are added when the APs associate to this controller and deleted when they lose their association. | 1.3.6.1.4.1.9.9.513.1.2.8.1 | not-accessible | current | |
| cLApDot11RadioStatsRxErrorFrameCount OBJECT-TYPE This object represents the number of error frames received on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.1 | Counter32 | read-only | current |
| cLApDot11RadioStatsMacMicErrFrameCount OBJECT-TYPE This object represents the number of frames with wrong MIC received by AP on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.2 | Counter32 | read-only | current |
| cLApDot11RadioStatsMacDecryptErrFrameCount OBJECT-TYPE This object represents the number of frames with destroyed encrypted data received by AP on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.3 | Counter32 | read-only | current |
| cLApDot11RadioStatsRxMgmtFrameCount OBJECT-TYPE This object represents the total number of management frame received on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.4 | Counter32 | read-only | current |
| cLApDot11RadioStatsRxCtrlFrameCount OBJECT-TYPE This object represents the total number of control frame received on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.5 | Counter32 | read-only | current |
| cLApDot11RadioStatsRxDataFrameCount OBJECT-TYPE This object represents the total number of data frame received on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.6 | Counter32 | read-only | current |
| cLApDot11RadioStatsTxMgmtFrameCount OBJECT-TYPE This object represents the total number of management frame transmitted on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.7 | Counter32 | read-only | current |
| cLApDot11RadioStatsTxCtrlFrameCount OBJECT-TYPE This object represents the total number of control frame transmitted on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.8 | Counter32 | read-only | current |
| cLApDot11RadioStatsTxDataFrameCount OBJECT-TYPE This object represents the total number of data frame transmitted on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.9 | Counter32 | read-only | current |
| cLApDot11RadioStatsRxDataPacketCount OBJECT-TYPE This object represents the total number of data packets received on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.10 | Counter32 | read-only | current |
| cLApDot11RadioStatsTxDataPacketCount OBJECT-TYPE This object represents the total number of data packets transmitted on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.11 | Counter32 | read-only | current |
| cLApDot11RadioStatsRetryFrameCount OBJECT-TYPE This object represents the total number of downstream retry frames on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.12 | Counter32 | read-only | current |
| cLApDot11RadioStatsRetryPacketCount OBJECT-TYPE This object represents the total number of downstream retry packets on the radio. | 1.3.6.1.4.1.9.9.513.1.2.8.1.13 | Counter32 | read-only | current |
| cLApDot11RadioRssiTable OBJECT-TYPE This table represents Per AP, Per Radio Stats information of Average, Highest, Lowest Rssi of all the clients update of the APs Radio. | 1.3.6.1.4.1.9.9.513.1.2.9 | not-accessible | current | |
| cLApDot11RadioRssiEntry OBJECT-TYPE This entry contains stats information of Average, Highest and Lowest RSSI of Per AP Per Radio. | 1.3.6.1.4.1.9.9.513.1.2.9.1 | not-accessible | current | |
| cLApDot11RadioRssiHighest OBJECT-TYPE This object represents the Highest Rssi value of the specific radio on this access point. The value '0' dbm represents no activity on this access point radio. | 1.3.6.1.4.1.9.9.513.1.2.9.1.1 | Integer32 | read-only | current |
| cLApDot11RadioRssiLowest OBJECT-TYPE This object represents the Lowest Rssi value of the specific radio on this access point. The value '0' dbm represents no activity on this access point radio. | 1.3.6.1.4.1.9.9.513.1.2.9.1.2 | Integer32 | read-only | current |
| cLApDot11RadioRssiAverage OBJECT-TYPE This object represents the Average Rssi value of the specific radio on this access point. The value '0' dbm represents no activity on this access point radio. | 1.3.6.1.4.1.9.9.513.1.2.9.1.3 | Integer32 | read-only | current |
| cLApDot11RadioRateStatsTable OBJECT-TYPE This table represents per AP, per radio, per rate stats information of all the clients of the APs Radio. | 1.3.6.1.4.1.9.9.513.1.2.10 | not-accessible | current | |
| cLApDot11RadioRateStatsEntry OBJECT-TYPE This entry contains stats information of Rx/Tx packets and bytes of per AP per radio per rate. | 1.3.6.1.4.1.9.9.513.1.2.10.1 | not-accessible | current | |
| cLApDot11RadioRate OBJECT-TYPE This object uniquely identifies the data rate value for a particular band. | 1.3.6.1.4.1.9.9.513.1.2.10.1.1 | Unsigned32 | not-accessible | current |
| cLApDot11RadioRateStatsRxPackets OBJECT-TYPE This object represents the number of packets received for the specific radio and data rate on this access point. | 1.3.6.1.4.1.9.9.513.1.2.10.1.2 | Counter32 | read-only | current |
| cLApDot11RadioRateStatsRxBytes OBJECT-TYPE This object represents the number of bytes received for the specific radio and data rate on this access point. | 1.3.6.1.4.1.9.9.513.1.2.10.1.3 | Counter32 | read-only | current |
| cLApDot11RadioRateStatsTxPackets OBJECT-TYPE This object represents the number of packets transmitted from the specific radio and data rate on this access point. | 1.3.6.1.4.1.9.9.513.1.2.10.1.4 | Counter32 | read-only | current |
| cLApDot11RadioRateStatsTxBytes OBJECT-TYPE This object represents the number of bytes transmitted from the specific radio and data rate on this access point. | 1.3.6.1.4.1.9.9.513.1.2.10.1.5 | Counter32 | read-only | current |
| cLApDot11RadioRateString OBJECT-TYPE This object represents the data rate in a user-friendly text string format. | 1.3.6.1.4.1.9.9.513.1.2.10.1.6 | SnmpAdminString | read-only | current |
| cLApDot11RadioSsidTable OBJECT-TYPE This table represents Per AP, Per Radio information of Ssid of all the neighbor APs updating the APs Radio. | 1.3.6.1.4.1.9.9.513.1.2.11 | not-accessible | current | |
| cLApDot11RadioSsidEntry OBJECT-TYPE This entry contains ssid information of Neighbor APs of Per AP Per Radio. | 1.3.6.1.4.1.9.9.513.1.2.11.1 | not-accessible | current | |
| cLApSsidIndex OBJECT-TYPE This object indicates the index of the ssid detected by Per AP Per Radio. | 1.3.6.1.4.1.9.9.513.1.2.11.1.1 | Unsigned32 | not-accessible | current |
| cLApDot11RadioSsidName OBJECT-TYPE This object represents the ssid name of the neighbor AP on this access point. | 1.3.6.1.4.1.9.9.513.1.2.11.1.2 | OCTET STRING (SIZE(1..32)) | read-only | current |
| cLApCableModemIfStatsTable OBJECT-TYPE This table represents the statistics of cable modem interface per AP when the CM connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12 | not-accessible | current | |
| cLApCableModemIfStatsEntry OBJECT-TYPE This entry contains stats information of cable modem per AP | 1.3.6.1.4.1.9.9.513.1.2.12.1 | not-accessible | current | |
| cLApCmMacAddress OBJECT-TYPE This object represents the MAC address of the Cable Modem that has been connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.1 | MacAddress | read-only | current |
| cLApCmApMacAddress OBJECT-TYPE This object represents the ethernet MAC address of the AP where the Cable Modem is connected. | 1.3.6.1.4.1.9.9.513.1.2.12.1.2 | MacAddress | read-only | current |
| cLApCmSwVersion OBJECT-TYPE This object represents the software version of the Cable Modem that has been connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.3 | SnmpAdminString | read-only | current |
| cLApEthernetSpeed OBJECT-TYPE This object represents the ethernet speed of the Cable Modem that has been connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.4 | SnmpAdminString | read-only | current |
| cLApEthernetStatus OBJECT-TYPE This object represents the ethernet status of the Cable Modem that has been connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.5 | SnmpAdminString | read-only | current |
| cLApCmStatus OBJECT-TYPE This object represents the status of the Cable Modem that has been connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.6 | SnmpAdminString | read-only | current |
| cLApCmSerialNumber OBJECT-TYPE This object represents the serial number of the Cable Modem that has been connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.7 | SnmpAdminString | read-only | current |
| cLApCmUsChannelStatus OBJECT-TYPE This object represents the upstream channel Status of the Cable Modem that has been connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.8 | SnmpAdminString | read-only | current |
| cLApCmDsChannelStatus OBJECT-TYPE This object represents the downstream Channel Status of the Cable Modem that has been connected to the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.9 | SnmpAdminString | read-only | current |
| cLApCmMaskBit OBJECT-TYPE This object represents the mask bit of the Cable Modem based on the mask value the CM statistics is displayed for the AP. | 1.3.6.1.4.1.9.9.513.1.2.12.1.10 | SnmpAdminString | read-only | current |
| ciscoLwappApGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.3 | |||
| cLApFastHbTimerTable OBJECT-TYPE This table contains entries for AP fast heartbeat timers configured in the controller. At startup, all the entries in this table are set up by the central controller. A management application can later change the values in this table. | 1.3.6.1.4.1.9.9.513.1.3.1 | not-accessible | current | |
| cLApFastHbTimerEntry OBJECT-TYPE A conceptual row in cLApFastHbTimerTable. There is an entry in this table for each AP type, as identified by a value of cLApFastHbTimerApType. | 1.3.6.1.4.1.9.9.513.1.3.1.1 | not-accessible | current | |
| cLApFastHbTimerApType OBJECT-TYPE This object represents the AP type for this entry. local - indicates that timer is for local mode APs hreap - indicates that timer is for HREAP APs | 1.3.6.1.4.1.9.9.513.1.3.1.1.1 | INTEGER {local(1), hreap(2)} | not-accessible | current |
| cLApFastHbTimerTimeout OBJECT-TYPE This object specifies the timeout value for the heart beat timer. This value changes to 0 when cLApFastHbTimerEnabled is set to 'false'. | 1.3.6.1.4.1.9.9.513.1.3.1.1.2 | Unsigned32 (1..15) | read-write | current |
| cLApFastHbTimerEnabled OBJECT-TYPE This object specifies the heartbeat timer. A value of 'true' indicates that this timer is enabled. A value of 'false' indicates that this timer is disabled. | 1.3.6.1.4.1.9.9.513.1.3.1.1.3 | TruthValue | read-write | current |
| cLApPrimaryDiscoveryTimeout OBJECT-TYPE This object specifies the timeout for the primary AP discovery. | 1.3.6.1.4.1.9.9.513.1.3.3 | Unsigned32 (30..3600) | read-write | current |
| cLApGlobalPrimaryControllerAddressType OBJECT-TYPE This object specifies the type of the primary controller's address made available through cLApPrimaryControllerAddress. | 1.3.6.1.4.1.9.9.513.1.3.4 | InetAddressType | read-write | current |
| cLApGlobalPrimaryControllerAddress OBJECT-TYPE This object specifies the address of the primary controller that the APs will join. The name and address should be provided in the same set request. An address of all zeros will unset the primary controller. | 1.3.6.1.4.1.9.9.513.1.3.5 | InetAddress | read-write | current |
| cLApGlobalPrimaryControllerName OBJECT-TYPE This object specifies the name of the primary controller that the APs will join. | 1.3.6.1.4.1.9.9.513.1.3.6 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApGlobalSecondaryControllerAddressType OBJECT-TYPE This object specifies the type of the secondary controller's address made available through cLApSecondaryControllerAddress. | 1.3.6.1.4.1.9.9.513.1.3.7 | InetAddressType | read-write | current |
| cLApGlobalSecondaryControllerAddress OBJECT-TYPE This object specifies the address of the secondary controller that the APs will join. The name and address should be provided in the same set request. An address of all zeros will unset the secondary controller. | 1.3.6.1.4.1.9.9.513.1.3.8 | InetAddress | read-write | current |
| cLApGlobalSecondaryControllerName OBJECT-TYPE This object specifies the name of the secondary controller that the APs will join. | 1.3.6.1.4.1.9.9.513.1.3.9 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApGlobalFailoverPriority OBJECT-TYPE This object specifies the global AP failover priority. If Enabled, Priorities will be considered of the APs which wishes to join the controller. Preference will be given to the higher priority AP. If the number of associated AP has already reached the limit then the controller will disassociate a lower priority AP to accomodate a higher priority AP. Default is Disabled state. | 1.3.6.1.4.1.9.9.513.1.3.10 | TruthValue | read-write | current |
| cLApGlobalTcpMss OBJECT-TYPE This object specifies the Global AP TCP MSS value. Permissible value are between 536 and 1363. This will also enable the global TCP MSS flag. Value of 0 will disable the global TCP MSS flag. Any change of value for this object will be reflected to cLApTcpMss | 1.3.6.1.4.1.9.9.513.1.3.11 | Integer32 (0 | 536..1363) | read-write | current |
| cLApGlobalDot11IfTable OBJECT-TYPE This table is used to configure the global dot11 parameters per slot id, represented by cLApDot11IfSlotId, of the radio interface in all the APs joined with the controller. | 1.3.6.1.4.1.9.9.513.1.3.12 | not-accessible | current | |
| cLApGlobalDot11IfEntry OBJECT-TYPE This represents an entry in the cLApGlobalDot11IfTable. | 1.3.6.1.4.1.9.9.513.1.3.12.1 | not-accessible | current | |
| cLApGlobalDot11IfCdpEnabled OBJECT-TYPE This object specifies to configure the Cisco Discovery Protocol(CDP) in the interface, represented by cLApDot11IfSlotId of the all the APs, joined in the controller. Setting this object to a value of 'true' would turn on the CDP on this slot. Setting this object to a value of 'false' would turn off the CDP on this slot, so that CDP advertisements are not sent. Read operation on this attribute will not be supported. When queried this will return a value of 'false'. | 1.3.6.1.4.1.9.9.513.1.3.12.1.1 | TruthValue | read-write | current |
| cLApGlobalEthernetIfTable OBJECT-TYPE This table is used to configure the global parameters on Ethernet interfaces of all the APs joined with the controller. | 1.3.6.1.4.1.9.9.513.1.3.13 | not-accessible | current | |
| cLApGlobalEthernetIfEntry OBJECT-TYPE This represents an entry in cLApGlobalEthernetIfTable. | 1.3.6.1.4.1.9.9.513.1.3.13.1 | not-accessible | current | |
| cLApGlobalEthernetIfCdpEnabled OBJECT-TYPE This object is specifies to configure the Cisco Discovery Protocol(CDP) in the interface, represented by cLApEthernetIfSlotId of the all the APs, joined in the controller. Setting this object to a value of 'true' would turn on the CDP on this ethernet interface. Setting this object to a value of 'false' would turn off the CDP on this ethernet interface, so that CDP advertisements are not sent. Read operation on this attribute will not be supported. When queried this will return a value of 'false'. | 1.3.6.1.4.1.9.9.513.1.3.13.1.1 | TruthValue | read-write | current |
| cLApGlobalRetransmitCount OBJECT-TYPE This object specifies the retransmission count for the Control Packet of all the Access Points, joined to this controller. This value specifies the number of packets retransmitted after which the Access Point falls back to another controller in case of failover. | 1.3.6.1.4.1.9.9.513.1.3.14 | Unsigned32 | read-write | current |
| cLApGlobalRetransmitTimeout OBJECT-TYPE This object specifies the retransmission timeout for the Control Packet of all the Access Points, joined to this controller. This value specifies the timeout for each retransmission, during the fallback of Access Point to another controller in case of failover. | 1.3.6.1.4.1.9.9.513.1.3.15 | Unsigned32 | read-write | current |
| cLApOeapDisableLocalAccess OBJECT-TYPE This object specifies whether the local access is supported for all the Office Extended Access Points, joined to this controller. If set to true, the local SSID and and LAN ports on the OEAP will be disabled. | 1.3.6.1.4.1.9.9.513.1.3.16 | TruthValue | read-write | current |
| cLApGlobalLEDState OBJECT-TYPE This object specifies whether the LED state of all the access points should be enabled or disabled. | 1.3.6.1.4.1.9.9.513.1.3.17 | TruthValue | read-write | current |
| cLApRadioInterfaceShutdownEnabled OBJECT-TYPE This object specifies to enable or disable AP radio Interface. When enabled, AP radio's will be shut down when Ethernet link goes down for a duration of time set for cLApEthernetInterfaceDowntime. A value of 'true' indicates the AP radio interface shutdown is enabled. A value of 'false' indicates the AP radio interface shutdown is disabled. | 1.3.6.1.4.1.9.9.513.1.3.18 | TruthValue | read-write | current |
| cLApEthernetInterfaceDowntime OBJECT-TYPE This object specifies the ethernet interface down time after which the AP radio interface will be shut down. | 1.3.6.1.4.1.9.9.513.1.3.19 | Unsigned32 | read-write | current |
| cLAPMulticastGroupAddressType OBJECT-TYPE This object specifies the AP multicast group address type. | 1.3.6.1.4.1.9.9.513.1.3.20 | InetAddressType | read-write | current |
| cLAPMulticastGroupAddress OBJECT-TYPE This object specifies the AP multicast group address. | 1.3.6.1.4.1.9.9.513.1.3.21 | InetAddress | read-write | current |
| cLAPMulticastMode OBJECT-TYPE This object specifies the switch's ethernet multicast support. unicast - Controller will convert multicast to unicast packet. multicast - Multicast mode is enabled. | 1.3.6.1.4.1.9.9.513.1.3.22 | INTEGER {unicast(1), multicast(2)} | read-write | current |
| cLApPrimedDiscoveryTimeout OBJECT-TYPE This object specifies the primed timeout for the AP discovery. | 1.3.6.1.4.1.9.9.513.1.3.23 | Integer32 (0 | 120..43200) | read-write | current |
| cLApGlobalPreferMode OBJECT-TYPE This object specifies the global capwap prefer-mode. ipv4 - capwap tunnel established with ipv4 address. ipv6 - capwap tunnel established with ipv6 address. | 1.3.6.1.4.1.9.9.513.1.3.24 | INTEGER {ipv4(1), ipv6(2)} | read-write | current |
| cLApGlobalAPLagCapability OBJECT-TYPE This object specifies whether the ap-lag capability state of all the access points should be enabled or disabled. A value of 'true' indicates ap-lag capapbility is enabled. A value of 'false' indicates ap-lag capapbility is disabled. | 1.3.6.1.4.1.9.9.513.1.3.25 | TruthValue | read-write | current |
| cLApGlobalAPDtlsVersion OBJECT-TYPE This object specifies the dtls version of ap | 1.3.6.1.4.1.9.9.513.1.3.26 | INTEGER {dtls10(1), dtls12(2), dtlsall(3)} | read-write | current |
| cLApGlobalAPDtlsCipherSuite OBJECT-TYPE This object specifies the dtls cipher suite of ap | 1.3.6.1.4.1.9.9.513.1.3.27 | INTEGER {rsaaes128sha1(47), dhersaaes128cbcsha(51), rsaaes256sha1(53), dhersaaes256cbcsha(57), rsaaes256sha256(61), rsagcm128sha256(156), rsagcm256sha384(157), ecdsaaes128gcmsha256(49195), ecdsaaes256gcmsha384(49196), dhersaaes256cbcsha256(49197)} | read-write | current |
| cLApGlobalMaxApsSupported OBJECT-TYPE This object represents the maximum number of APs supported by this controller. | 1.3.6.1.4.1.9.9.513.1.3.28 | Integer32 | read-only | current |
| cLApAuthorizeApMacAuth OBJECT-TYPE This flag specifies the status of mac auth | 1.3.6.1.4.1.9.9.513.1.3.30 | TruthValue | read-write | current |
| cLApAuthorizeApSerialNumAuth OBJECT-TYPE This flag specifies the status of serial number auth | 1.3.6.1.4.1.9.9.513.1.3.31 | TruthValue | read-write | current |
| cLApAuthorizeApMethodList OBJECT-TYPE This object specifies the method list used for the AP authorization when enabled. The default method list is default | 1.3.6.1.4.1.9.9.513.1.3.32 | SnmpAdminString | read-write | current |
| cLApGlobalAPAuditReport OBJECT-TYPE This object is used to enable/disable AP audit reporting. It is disabled by default | 1.3.6.1.4.1.9.9.513.1.3.33 | TruthValue | read-write | current |
| cLApGlobalAPAuditReportInterval OBJECT-TYPE This object specifies the audit report interval in minutes. The default interval is 1440 minutes | 1.3.6.1.4.1.9.9.513.1.3.34 | Unsigned32 (10..43200) | read-write | current |
| cLApGlobalAPConnectCount OBJECT-TYPE This object represents the Count of AP's that are connected to the Controller. | 1.3.6.1.4.1.9.9.513.1.3.35 | Unsigned32 | read-only | current |
| cLApAuthorizeApMacMethodList OBJECT-TYPE This object specifies the method list used for the AP MAC authorization when enabled. | 1.3.6.1.4.1.9.9.513.1.3.36 | SnmpAdminString | read-write | current |
| cLApAuthorizeApSerialNumMethodList OBJECT-TYPE This object specifies the method list used for the AP serial number authorization when enabled. | 1.3.6.1.4.1.9.9.513.1.3.37 | SnmpAdminString | read-write | current |
| clApImageUpgradeConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.3.38 | |||
| clApImageUpgradeHttpsEnable OBJECT-TYPE This object specifies the state of AP Image Upgrade method HTTPS on the controller. A value of 'true' indicates that the AP Image Upgrade method HTTPS is enabled. A value of 'false' indicates that the AP Image Upgrade method HTTPS is disabled. | 1.3.6.1.4.1.9.9.513.1.3.38.1 | TruthValue | read-write | current |
| ciscoLwappApCredentials OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.4 | |||
| cLApCredentialGlobalUserName OBJECT-TYPE This object specifies the global username for all the APs already joined or will join the controller. This user name is used to access the console on the AP. | 1.3.6.1.4.1.9.9.513.1.4.1 | SnmpAdminString | read-write | current |
| cLApCredentialGlobalPassword OBJECT-TYPE This object specifies the password corresponding to the user name represented by cLApCredentialGlobalUserName object. | 1.3.6.1.4.1.9.9.513.1.4.2 | SnmpAdminString | read-write | current |
| cLApCredentialGlobalSecret OBJECT-TYPE This object specifies the secret key for all the APs already joined or will join the controller. This provides read-write access to the console on the AP. | 1.3.6.1.4.1.9.9.513.1.4.3 | SnmpAdminString | read-write | current |
| cLApCredentialsTable OBJECT-TYPE This table provides the information about the credentials of the 802.11 LWAPP Access Points that have joined the controller. Rows are added to this table whenever, new APs are joined to this controller, and rows are deleted whenever APs gets disjoined from the controller. | 1.3.6.1.4.1.9.9.513.1.4.4 | not-accessible | current | |
| cLApCredentialsEntry OBJECT-TYPE Each entry in this table provides information about one 802.11 LWAPP Access Point that has joined the controller. cLApSysMacAddress is the index which uniquely identifies every row in the table. | 1.3.6.1.4.1.9.9.513.1.4.4.1 | not-accessible | current | |
| cLApCredentialUserName OBJECT-TYPE This object specifies the username for this AP. | 1.3.6.1.4.1.9.9.513.1.4.4.1.1 | SnmpAdminString | read-create | current |
| cLApCredentialPassword OBJECT-TYPE This object specifies the password corresponding to user name represented by cLApCredentialUserName object. | 1.3.6.1.4.1.9.9.513.1.4.4.1.2 | SnmpAdminString | read-create | current |
| cLApCredentialSecret OBJECT-TYPE This object specifies the secret key for the specific AP. This provides the read-write access on the console for this AP. | 1.3.6.1.4.1.9.9.513.1.4.4.1.3 | SnmpAdminString | read-create | current |
| cLApCredentialEnableGlobalCredentials OBJECT-TYPE This object specifies whether the global credentials for the AP is enabled or disabled. A value of 'true' indicates the global username/password to be used for this AP . A value of 'false' indicates the global credentials and uses the credentials specific for this AP is disabled. | 1.3.6.1.4.1.9.9.513.1.4.4.1.4 | TruthValue | read-create | current |
| ciscoLwappLinkLatency OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.5 | |||
| cLApLinkLatencyTable OBJECT-TYPE This table represents the link latency configuration for each AP. An entry is automatically added to this table when an Access Points Joins controller. Entry is removed from this table when AP disassociates from the controllers. | 1.3.6.1.4.1.9.9.513.1.5.1 | not-accessible | current | |
| cLApLinkLatencyEntry OBJECT-TYPE Each entry in this table provides configuration related to Link latency on each AP. | 1.3.6.1.4.1.9.9.513.1.5.1.1 | not-accessible | current | |
| cLApLinkLatencyEnable OBJECT-TYPE This object specifies to configure the Link Latency on the AP. A value of 'true' indicates that the Link Latency is enabled. A value of 'false' indicates that the Link Latency is disabled. | 1.3.6.1.4.1.9.9.513.1.5.1.1.1 | TruthValue | read-write | current |
| cLApLinkLatencyReset OBJECT-TYPE This object specifies to reset the Link Latency stored at controller for an AP. A value of 'true' indicates that the Link Latency stats is to be reset. A value of 'false' on this during set will return error. A value of false will be returned on get. | 1.3.6.1.4.1.9.9.513.1.5.1.1.2 | TruthValue | read-write | current |
| cLApLinkLatencyStatsTable OBJECT-TYPE This table represents the link latency statistics calculated for each AP. An entry is automatically added by the controller when a 'cLApLinkLatencyEnable' is enabled on an Access Point. Entry is deleted when 'cLApLinkLatencyEnable' is disabled on the Access Point. | 1.3.6.1.4.1.9.9.513.1.5.2 | not-accessible | current | |
| cLApLinkLatencyStatsEntry OBJECT-TYPE Each entry in this table provides minimum, maximum and average Link latency for a Access Point. Entries are removed when the Link Latency is disabled on a Access Point. | 1.3.6.1.4.1.9.9.513.1.5.2.1 | not-accessible | current | |
| cLApLinkLatencyStatsCurrent OBJECT-TYPE This object represents the current Link latency recorded for this Access point. | 1.3.6.1.4.1.9.9.513.1.5.2.1.1 | TimeInterval | read-only | current |
| cLApLinkLatencyStatsMin OBJECT-TYPE This object represents the minimum Link latency recorded for this Access point. | 1.3.6.1.4.1.9.9.513.1.5.2.1.2 | TimeInterval | read-only | current |
| cLApLinkLatencyStatsMax OBJECT-TYPE This object represents the maximum Link latency recorded for this Access point. | 1.3.6.1.4.1.9.9.513.1.5.2.1.3 | TimeInterval | read-only | current |
| cLApLinkLatencyTimeStamp OBJECT-TYPE This object represents the timestamp, when the values are collected, as returned by the object 'cLApUpTime'. | 1.3.6.1.4.1.9.9.513.1.5.2.1.4 | TimeStamp | read-only | current |
| cLApDataLinkLatencyStatsCurrent OBJECT-TYPE This object represents the current Data Link latency recorded for this Access point. | 1.3.6.1.4.1.9.9.513.1.5.2.1.5 | TimeInterval | read-only | current |
| cLApDataLinkLatencyStatsMin OBJECT-TYPE This object represents the minimum Data Link latency recorded for this Access point. | 1.3.6.1.4.1.9.9.513.1.5.2.1.6 | TimeInterval | read-only | current |
| cLApDataLinkLatencyStatsMax OBJECT-TYPE This object represents the maximum Data Link latency recorded for this Access point. | 1.3.6.1.4.1.9.9.513.1.5.2.1.7 | TimeInterval | read-only | current |
| cLApDataLinkLatencyTimeStamp OBJECT-TYPE This object represents the timestamp, when the values are collected, as returned by the object 'cLApUpTime'. | 1.3.6.1.4.1.9.9.513.1.5.2.1.8 | TimeStamp | read-only | current |
| ciscoLwappSpectrum OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.6 | |||
| ciscoLwappAp802dot1xSupplicant OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.7 | |||
| cLApGlobal802dot1xAuthenticationEnabled OBJECT-TYPE This object specifies the Global AP 802.1x Supplicant Authentication feature. If configured as True, user can configure 8021.1x authentication between lightweight access points and the switch. The access point acts as an 802.1x supplicant and is authenticated by the switch using EAP-FAST with anonymous PAC provisioning.User can set global authentication settings that all access points inherit as they join the controller. This includes all access points that are currently joined to the controller and any that join in the future. If desired, user can override the global authentication settings and assign unique authentication settings for a specific access point. Default state is False. | 1.3.6.1.4.1.9.9.513.1.7.1 | TruthValue | read-write | current |
| cLApGlobal802dot1xSupplicantUsername OBJECT-TYPE This object specifies the 802.1x supplicant username that is to be inherited by all access points that join the controller. | 1.3.6.1.4.1.9.9.513.1.7.2 | SnmpAdminString | read-write | current |
| cLApGlobal802dot1xSupplicantPassword OBJECT-TYPE This object specifies the 802.1x supplicant Password that is to be inherited by all access points that join the controller. A query on this OID will always return '****'. | 1.3.6.1.4.1.9.9.513.1.7.3 | SnmpAdminString | read-write | current |
| cLAp802dot1xSupplicantTable OBJECT-TYPE This table provides the information about the 802.1x Supplicant credentials of the 802.11 LWAPP Access Points that have joined the controller. Rows are added to this table whenever, new APs are joined to this controller, and rows are deleted whenever APs gets disjoined from the controller. | 1.3.6.1.4.1.9.9.513.1.7.4 | not-accessible | current | |
| cLAp802dot1xSupplicantEntry OBJECT-TYPE Each entry in this table provides information about one 802.11 LWAPP Access Point that has joined the controller. cLApSysMacAddress is the index which uniquely identifies every row in the table. | 1.3.6.1.4.1.9.9.513.1.7.4.1 | not-accessible | current | |
| cLAp802dot1xSupplicantOverrideEnabled OBJECT-TYPE This object specifies the individual AP level 802.1x Supplicant Authentication override parameters. A value of 'true' indicates user can override the Global AP 8021.1x authentication credentials by providing individual AP level credentials. A value of 'false' indicates user cannot override the Global AP 802.1x authentication credentials. | 1.3.6.1.4.1.9.9.513.1.7.4.1.1 | TruthValue | read-write | current |
| cLAp802dot1xSupplicantOverrideUsername OBJECT-TYPE This object specifies the individual AP level 802.1x supplicant override username. | 1.3.6.1.4.1.9.9.513.1.7.4.1.2 | SnmpAdminString | read-write | current |
| cLAp802dot1xSupplicantOverridePassword OBJECT-TYPE This object the individual AP level 802.1x supplicant override password. A query on this OID will always return '****'. | 1.3.6.1.4.1.9.9.513.1.7.4.1.3 | SnmpAdminString | read-write | current |
| cLAp802dot1xSupplicantOverrideEapType OBJECT-TYPE This object specifies the EAP type to be applied for ap port auth as AP override config. | 1.3.6.1.4.1.9.9.513.1.7.4.1.4 | INTEGER {none(1), eapFast(2), eapTls(3), peap(4)} | read-write | current |
| cLApGlobal802dot1xSupplicantEapType OBJECT-TYPE This object specifies the EAP type to be applied for ap port auth as Global config. | 1.3.6.1.4.1.9.9.513.1.7.5 | INTEGER {none(1), eapFast(2), eapTls(3), peap(4)} | read-write | current |
| cLApSeClientTable OBJECT-TYPE This table represents the information about the details of Spectrum Expert client connected to radio interface of APs | 1.3.6.1.4.1.9.9.513.1.8 | not-accessible | current | |
| cLApSeClientEntry OBJECT-TYPE An entry in this table represents the details of Spectrum Expert client connected to APs | 1.3.6.1.4.1.9.9.513.1.8.1 | not-accessible | current | |
| cLApSeIndex OBJECT-TYPE This object indicates the index of the client running the Spectrum Expert instance. | 1.3.6.1.4.1.9.9.513.1.8.1.1 | Integer32 (0..2) | not-accessible | current |
| cLApSeClientUserName OBJECT-TYPE This object represents the name of the client running the Spectrum Expert application | 1.3.6.1.4.1.9.9.513.1.8.1.2 | SnmpAdminString | read-only | current |
| cLApSeClientIPAddrType OBJECT-TYPE This object represents the client IP address type, that runs the SE application, made available through cLApSeClientIPAddr | 1.3.6.1.4.1.9.9.513.1.8.1.3 | InetAddressType | read-only | current |
| cLApSeClientIPAddr OBJECT-TYPE This object represents the client IP address, that runs the SE application | 1.3.6.1.4.1.9.9.513.1.8.1.4 | InetAddress | read-only | current |
| cLApSeClientDuration OBJECT-TYPE This object represents the duration for which the SE client application has been up and running | 1.3.6.1.4.1.9.9.513.1.8.1.5 | TimeInterval | read-only | current |
| cLApSeClientPort OBJECT-TYPE This object represents the port from which the SE client application is running | 1.3.6.1.4.1.9.9.513.1.8.1.6 | InetPortNumber | read-only | current |
| ciscoLwappApWlanStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.9 | |||
| cLApWlanStatsTable OBJECT-TYPE This table represents Per-AP, Per-Radio, Per-SSID Stats information of packets/bytes sent/received, retransmission counter, associated clients counter, etc. | 1.3.6.1.4.1.9.9.513.1.9.1 | not-accessible | current | |
| cLApWlanStatsEntry OBJECT-TYPE This entry contains stats information of packets/bytes sent/received, retransmission counter, associated clients counter, and etc. | 1.3.6.1.4.1.9.9.513.1.9.1.1 | not-accessible | current | |
| cLApWlanStatsTxPktNum OBJECT-TYPE This object represents the transmitted packets counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.9.1.1.1 | Counter64 | read-only | current |
| cLApWlanStatsTxOctetNum OBJECT-TYPE This object represents the transmitted bytes counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.9.1.1.2 | Counter64 | read-only | current |
| cLApWlanStatsRxPktNum OBJECT-TYPE This object represents the received packets counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.9.1.1.3 | Counter64 | read-only | current |
| cLApWlanStatsRxOctetNum OBJECT-TYPE This object represents the received bytes counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.9.1.1.4 | Counter64 | read-only | current |
| cLApWlanStatsRetransmitNum OBJECT-TYPE This object represents the packet retransmission counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.9.1.1.5 | Counter64 | read-only | current |
| cLApWlanStatsAssocClientNum OBJECT-TYPE This object represents the associated client counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.9.1.1.6 | Unsigned32 | read-only | current |
| cLApWlanStatsOnlineUserNum OBJECT-TYPE This object represents the online user counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.9.1.1.7 | Unsigned32 | read-only | current |
| ciscoLwappApWlanInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.10 | |||
| cLApWlanInfoTable OBJECT-TYPE This table represents Per-AP, Per-SSID information of max supported clients | 1.3.6.1.4.1.9.9.513.1.10.1 | not-accessible | current | |
| cLApWlanInfoEntry OBJECT-TYPE Each entry in this table represents the information about clients associated to a wlan broadcasted by an access point. | 1.3.6.1.4.1.9.9.513.1.10.1.1 | not-accessible | current | |
| cLApWlanInfoMaxClients OBJECT-TYPE This object specifies the maximum supported clients per WLAN . | 1.3.6.1.4.1.9.9.513.1.10.1.1.1 | Unsigned32 (1..600) | read-write | current |
| cLApRadioWlanInfoTable OBJECT-TYPE This table represents Per-AP, Per-radio, Per-SSID information. | 1.3.6.1.4.1.9.9.513.1.10.2 | not-accessible | current | |
| cLApRadioWlanInfoEntry OBJECT-TYPE This entry contains information of Per-AP, Per-RADIO, Per-SSID information. | 1.3.6.1.4.1.9.9.513.1.10.2.1 | not-accessible | current | |
| cLApRadioWlanSsid OBJECT-TYPE This object represents SSID of the particular WLAN, which is seen on the radio of the AP. | 1.3.6.1.4.1.9.9.513.1.10.2.1.1 | SnmpAdminString | read-only | current |
| cLApRadioWlanBssid OBJECT-TYPE This object represents the BSSID of the SSID on this radio of this AP. | 1.3.6.1.4.1.9.9.513.1.10.2.1.2 | MacAddress | read-only | current |
| ciscoLwappPacketDumpInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.11 | |||
| cLApPacketDumpFtpServerAddressType OBJECT-TYPE This object specifies the address type of the server to which the packet dump is stored. | 1.3.6.1.4.1.9.9.513.1.11.1 | InetAddressType | read-write | current |
| cLApPacketDumpFtpServerAddress OBJECT-TYPE This object specifies the address of the server to which the packet dump is stored. | 1.3.6.1.4.1.9.9.513.1.11.2 | InetAddress | read-write | current |
| cLApPacketDumpFtpServerPath OBJECT-TYPE This object specifies the directory path for the packet dump storing. The controller remembers the last file path used. | 1.3.6.1.4.1.9.9.513.1.11.3 | SnmpAdminString | read-write | current |
| cLApPacketDumpFtpUsername OBJECT-TYPE This object specifies to store the FTP username for transferring the packet-dump to the FTP server. | 1.3.6.1.4.1.9.9.513.1.11.4 | SnmpAdminString | read-write | current |
| cLApPacketDumpFtpPassword OBJECT-TYPE This object specifies the FTP server login password to store the packet dump. | 1.3.6.1.4.1.9.9.513.1.11.5 | SnmpAdminString | read-write | current |
| cLApPacketDumpClassifier OBJECT-TYPE This object specifies the Frame Type considered for packet-dump. | 1.3.6.1.4.1.9.9.513.1.11.6 | Bits {management(0), data(1), control(2), dot1x(3)} | read-write | current |
| cLApPacketDumpBufferSize OBJECT-TYPE This object specifies the buffer size considered for packet-dump. | 1.3.6.1.4.1.9.9.513.1.11.7 | Unsigned32 | read-write | current |
| cLApPacketDumpCaptureTime OBJECT-TYPE This object specifies the capture time considered for packet-dump. | 1.3.6.1.4.1.9.9.513.1.11.8 | Unsigned32 | read-write | current |
| cLApPacketDumpTruncation OBJECT-TYPE This object specifies the length of the packet after truncation | 1.3.6.1.4.1.9.9.513.1.11.9 | Unsigned32 | read-write | current |
| cLApPacketDumpApName OBJECT-TYPE This object specifies the AP name on which we need to start packet dump. | 1.3.6.1.4.1.9.9.513.1.11.10 | SnmpAdminString | read-write | current |
| cLApPacketDumpDeviceMacAddress OBJECT-TYPE This object specifies the MAC address of the device for which we need to start packet dump on the AP. | 1.3.6.1.4.1.9.9.513.1.11.11 | MacAddress | read-write | current |
| cLApPacketDumpStartStop OBJECT-TYPE This object specifies user to start or stop, packet dump on the associated AP to which the particular mobile station is connected. start - packet dump is started. stop - packet dump is stopped. none- information about current session is not available to the controller. | 1.3.6.1.4.1.9.9.513.1.11.12 | INTEGER {start(1), stop(2), none(3)} | read-write | current |
| ciscoLwappAplanStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.12 | |||
| cLAplanStatsTable OBJECT-TYPE This table represents Saridinia AP LAN stats information that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.12.1 | not-accessible | current | |
| cLAplanStatsEntry OBJECT-TYPE This entry contains stats information of LAN stats | 1.3.6.1.4.1.9.9.513.1.12.1.1 | not-accessible | current | |
| cLApLanPortId OBJECT-TYPE This object represents the ID of a LAN port of an AP. | 1.3.6.1.4.1.9.9.513.1.12.1.1.1 | Integer32 (1..4) | not-accessible | current |
| cLApLanPortState OBJECT-TYPE This object specifies the state of an ethernet interface of AP. A value of 'true' indicates admin status of ethernet interface is up. A value of 'false' indicates admin status of ethernet interface is down. | 1.3.6.1.4.1.9.9.513.1.12.1.1.2 | TruthValue | read-write | current |
| cLApLanPortVlanId OBJECT-TYPE This object specifies the Vlan Id of the ethernet interface. When the value is 0 , the VLAN access is disabled. | 1.3.6.1.4.1.9.9.513.1.12.1.1.3 | Unsigned32 (0..4094) | read-write | current |
| cLApLanPortVlanIdValid OBJECT-TYPE This object represents VLAN ID is valid or not for an ethernet interface. A value of 'true' indicates vlanId is valid. A value of 'false' indicates vlanId is not valid. | 1.3.6.1.4.1.9.9.513.1.12.1.1.4 | TruthValue | read-only | current |
| cLApLanPoeState OBJECT-TYPE This object specifies the LAN PoE Status of an ethernet interface of an AP. A value of 'true' indicates poe state is enabled for ethernet interface. A value of 'false' indicates poe state is disabled for ethernet interface. | 1.3.6.1.4.1.9.9.513.1.12.1.1.5 | TruthValue | read-write | current |
| cLApLanPowerLevelId OBJECT-TYPE This object specifies the power level of the port | 1.3.6.1.4.1.9.9.513.1.12.1.1.6 | Unsigned32 (1..4) | read-write | current |
| cLAplanOverrideTable OBJECT-TYPE This table represents the lan override status of an AP | 1.3.6.1.4.1.9.9.513.1.12.2 | not-accessible | current | |
| cLAplanOverrideEntry OBJECT-TYPE This entry contains stats information of LAN override status | 1.3.6.1.4.1.9.9.513.1.12.2.1 | not-accessible | current | |
| cLApLanOverride OBJECT-TYPE This object specifies the LAN port override status of AP. A value of 'true' indicates LAN override is enabled. A value of 'false' indicates LAN override is disabled. | 1.3.6.1.4.1.9.9.513.1.12.2.1.1 | TruthValue | read-write | current |
| ciscoLwappApGlobalBleBeacon OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.13 | |||
| cLHaloGlobalBleBeaconInterval OBJECT-TYPE This object represents the beacon interval between each transmissions from BLE module. This value is common to HALO enabled APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.13.1 | Unsigned32 (1..10) | read-write | current |
| cLHaloBleBeaconTable OBJECT-TYPE This table represents the BLE global configuration.It lists the ibeacon's identification number and attenuation value which is common to HALO enabled AP's that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.13.2 | not-accessible | current | |
| cLHaloBleBeaconEntry OBJECT-TYPE This entry contains BLE global configuration which lists the ibeacon's identification number and attenuation value of HALO enabled APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.13.2.1 | not-accessible | current | |
| cLHaloGlobalBleBeaconId OBJECT-TYPE This object represents the BLE ibeacon ID for which gloabl BLE configurations to be applied. | 1.3.6.1.4.1.9.9.513.1.13.2.1.1 | Unsigned32 | not-accessible | current |
| cLHaloGlobalBleBeaconUuid OBJECT-TYPE This object specifies the UUID (universally unique identifier) which is a 128-bit value. | 1.3.6.1.4.1.9.9.513.1.13.2.1.2 | SnmpAdminString (SIZE(0..128)) | read-write | current |
| cLHaloGlobalBleBeaconTxPower OBJECT-TYPE This object specifies TX power of particular ibeacon for HALO enabled APs that have joined the controller.The TX power is based on size of proximity zone needed. | 1.3.6.1.4.1.9.9.513.1.13.2.1.3 | Unsigned32 (0..52) | read-write | current |
| cLHaloGlobalBleBeaconEnable OBJECT-TYPE This object specifies the status of the BLE beacons. A value of 'true' indicates BLE beacon is enabled. A value of 'false' indicates BLE beacon is disabled. | 1.3.6.1.4.1.9.9.513.1.13.2.1.4 | TruthValue | read-write | current |
| cLApBleBeaconTable OBJECT-TYPE This table represents BLE ibeacon's AP specific configuration for HALO enabled APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.13.3 | not-accessible | current | |
| cLApBleBeaconEntry OBJECT-TYPE This entry contains BLE Beacon's AP specific configuration. | 1.3.6.1.4.1.9.9.513.1.13.3.1 | not-accessible | current | |
| cLApBleBeaconMajorField OBJECT-TYPE This object specifies the Major value of ibeacon that is used to differentiate ibeacons that have the same proximity UUID. | 1.3.6.1.4.1.9.9.513.1.13.3.1.1 | Unsigned32 | read-write | current |
| cLApBleBeaconMinorField OBJECT-TYPE This object specifies the Minor value of ibeacon that is used to differentiate ibeacons that have the same proximity UUID and has same major value. | 1.3.6.1.4.1.9.9.513.1.13.3.1.2 | Unsigned32 | read-write | current |
| cLApBleBeaconTxPower OBJECT-TYPE This object specifies TX power of particular ibeacon for specified HALO enabled AP. The TX power value is based on the size of proximity zone needed. | 1.3.6.1.4.1.9.9.513.1.13.3.1.3 | Unsigned32 (0..52) | read-write | current |
| cLApBleBeaconStatus OBJECT-TYPE This object specifies the status of the BLE beacons. A value of 'true' indicates BLE beacon is enabled, A value of 'false' indicates BLE beacon is disabled. | 1.3.6.1.4.1.9.9.513.1.13.3.1.4 | TruthValue | read-write | current |
| cLApBleBeaconUuid OBJECT-TYPE This object specifies the UUID (universally unique identifier) which is a 128-bit value. | 1.3.6.1.4.1.9.9.513.1.13.3.1.5 | SnmpAdminString (SIZE(0..128)) | read-write | current |
| cLApBleBeaconInterval OBJECT-TYPE This object specifies the beacon interval between each transmissions from BLE module. This value is common to HALO enabled APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.1.13.3.1.6 | Unsigned32 (1..10) | read-write | current |
| cLApBleBeaconApplyGlobal OBJECT-TYPE This object specifies to clear all BLE configuration at AP. A value of 'true' indicates configurations need to be cleared. A value of 'false' indicates configurations need not be cleared. | 1.3.6.1.4.1.9.9.513.1.13.3.1.7 | TruthValue | read-write | current |
| cLApBleBeaconAdvTxPower OBJECT-TYPE This object specifies the beacon advertised transmission power in the BLE beacon payload. This value is common to all beacons for a single AP. | 1.3.6.1.4.1.9.9.513.1.13.3.1.8 | Unsigned32 (40..100) | read-write | current |
| ciscoLwappApHyperlocation OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.14 | |||
| cLApHyperlocationTable OBJECT-TYPE This table represents the information about the APs hyperlocation state and its config nature controller. | 1.3.6.1.4.1.9.9.513.1.14.1 | not-accessible | current | |
| cLApHyperlocationEntry OBJECT-TYPE Each entry in this table provides information about Hyperlocation state and config nature of APs controller. | 1.3.6.1.4.1.9.9.513.1.14.1.1 | not-accessible | current | |
| cLApHyperlocationAdminState OBJECT-TYPE This object specifies the hyperlocation admin state for an AP to be enabled or disabled. A value of 'true' indicates admin state of HALO module is up. A value of 'false' indicates admin state of HALO module is down. | 1.3.6.1.4.1.9.9.513.1.14.1.1.1 | TruthValue | read-write | current |
| cLApHyperlocationUnsetFlag OBJECT-TYPE This object specifies explicit flag status for AP need to be enabled or not. A value of 'true' indicates AP has an explicit per AP config. A value of 'false' indicates there is no AP config | 1.3.6.1.4.1.9.9.513.1.14.1.1.2 | TruthValue | read-write | current |
| ciscoLwappApSecureCipher OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.15 | |||
| cLApSecureCipher OBJECT-TYPE This object specifies the secure ciphers, AES256+SHA or AES256+SHA2 for CAPWAP control tunnel. disable - This value indicates that AP and controller will continue to use default ciphers for CAPWAP tunnel. aes256sha1 - This value indicates that AP and controller will use AES256+SHA cipher for CAPWAP tunnel. aes256sha2 - This value indicates that AP and controller will use AES256+SHA2 cipher for CAPWAP tunnel. | 1.3.6.1.4.1.9.9.513.1.15.1 | INTEGER {disable(1), aes256sha1(2), aes256sha2(3)} | read-write | current |
| ciscoLwappApProfile OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.16 | |||
| cLApProfileTable OBJECT-TYPE This table provides the information about the Access Point profiles. Access Point profile is a set of configuration which can be different for APs at different site/location. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLApProfileRowStatus object. | 1.3.6.1.4.1.9.9.513.1.16.1 | not-accessible | current | |
| cLApProfileEntry OBJECT-TYPE Each entry in this table represents the AP profile configuration which can be applied to set of APs based on the controller configuration. Entries can be added/deleted by explicit management actions by NMS or by user console. | 1.3.6.1.4.1.9.9.513.1.16.1.1 | not-accessible | current | |
| cLApProfileName OBJECT-TYPE This object specifies one instance of an AP Profile on the controller. | 1.3.6.1.4.1.9.9.513.1.16.1.1.1 | SnmpAdminString (SIZE(0..32)) | not-accessible | current |
| cLApProfileRowStatus OBJECT-TYPE This object specifies the row to be added or deleted in this table. | 1.3.6.1.4.1.9.9.513.1.16.1.1.2 | RowStatus | read-create | current |
| cLApProfileCredentialGlobalUserName OBJECT-TYPE This object specifies the global username for the APs associated to a particular AP Profile. This user name is used to access the console on the AP. | 1.3.6.1.4.1.9.9.513.1.16.1.1.3 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileCredentialGlobalPassword OBJECT-TYPE This object specifies the password corresponding to the user name represented by cLApProfileCredentialGlobalUserName object. | 1.3.6.1.4.1.9.9.513.1.16.1.1.4 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileCredentialGlobalSecret OBJECT-TYPE This object specifies the secret key for the APs associated to particular AP profile. This provides read-write access to the console on the AP. | 1.3.6.1.4.1.9.9.513.1.16.1.1.5 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileCredentialEnableGlobalCredentials OBJECT-TYPE This object specifies whether the global credentials for the APs associated to a particular AP Profile is enabled or disabled. A value of 'true' enables the global username/password to be used for the APs associated to a particular AP Profile. A value of 'false' disables the global credentials and uses the credentials specific for the APs. | 1.3.6.1.4.1.9.9.513.1.16.1.1.6 | TruthValue | read-create | deprecated |
| cLApProfileLinkLatencyEnable OBJECT-TYPE This object specifies to the configuration of the Link Latency on the APs associated to a particular AP profile. disable - disables the link latency on the APs associated to a particular AP profile. enable - enables the link latency on the APs associated to a particular AP profile. data - enables data link latency on the APs associated to a particular AP profile. reset - reset the link latency on the APs associated to a particular AP profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.7 | INTEGER {disable(1), enable(2), data(3), reset(4)} | read-write | current |
| cLApProfileHaloBleBeaconInterval OBJECT-TYPE This object specifies the time interval between HALO BLE beacon transmissions. This value is common to HALO enabled APs that have joined the controller under the same AP profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.8 | Unsigned32 (1..10) | read-write | current |
| cLApProfileFastHbTimerTimeout OBJECT-TYPE This object specifies the timeout value for the Fast Heart Beat timer of all the APs associated to the current AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.12 | Unsigned32 (1..10) | read-write | current |
| cLApProfileFastHbTimerEnabled OBJECT-TYPE This object specifies if Fast Heart Beat Timer is enabled or not. A value of 'true' indicates that this timer is enabled. A value of 'false' indicates that this timer is disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.13 | TruthValue | read-write | deprecated |
| cLApProfilePrimaryDiscoveryTimeout OBJECT-TYPE This object specifies the timeout value for the primary AP discovery for a given Ap profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.14 | Unsigned32 (30..3000) | read-write | current |
| cLApProfileBackupPrimaryControllerAddressType OBJECT-TYPE This object specifies the type of the primary controller's address made available through cLApProfileBackupPrimaryControllerAddress. | 1.3.6.1.4.1.9.9.513.1.16.1.1.15 | InetAddressType | read-write | current |
| cLApProfileBackupPrimaryControllerAddress OBJECT-TYPE This object specifies the address of the primary controller that the APs in the profile should associate with. The name and address should be provided in the same set request. An address of all zeros will unset the primary controller. | 1.3.6.1.4.1.9.9.513.1.16.1.1.16 | InetAddress | read-write | current |
| cLApProfileBackupPrimaryControllerName OBJECT-TYPE This object specifies the name of the primary controller that the APs in the profile should associate with. | 1.3.6.1.4.1.9.9.513.1.16.1.1.17 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileBackupSecondaryControllerAddressType OBJECT-TYPE This object specifies the type of the secondary controller's address made available through cLApProfileBackupSecondaryControllerAddress. | 1.3.6.1.4.1.9.9.513.1.16.1.1.18 | InetAddressType | read-write | current |
| cLApProfileBackupSecondaryControllerAddress OBJECT-TYPE This object specifies the address of the secondary controller that the APs in the profile should associate with. The name and address should be provided in the same set request. An address of all zeros will unset the secondary controller. | 1.3.6.1.4.1.9.9.513.1.16.1.1.19 | InetAddress | read-write | current |
| cLApProfileBackupSecondaryControllerName OBJECT-TYPE This object specifies the name of the secondary controller that the APs in the profile should associate. | 1.3.6.1.4.1.9.9.513.1.16.1.1.20 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileBackupTertiaryControllerAddressType OBJECT-TYPE This object specifies the type of the tertiary controller's address made available through cLApProfileBackupTertiaryControllerAddress. | 1.3.6.1.4.1.9.9.513.1.16.1.1.21 | InetAddressType | read-write | current |
| cLApProfileBackupTertiaryControllerAddress OBJECT-TYPE This object specifies the address of the tertiary controller that the APs in the profile should associate with. The name and address should be provided in the same set request. An address of all zeros will unset the tertiary controller. | 1.3.6.1.4.1.9.9.513.1.16.1.1.22 | InetAddress | read-write | current |
| cLApProfileBackupTertiaryControllerName OBJECT-TYPE This object specifies the name of the tertiary controller that the APs in the profile should associate with | 1.3.6.1.4.1.9.9.513.1.16.1.1.23 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileTcpMss OBJECT-TYPE This object specifies the AP TCP MSS value per AP profile. The permissible value are between 536 and 1363. This will also enable the global TCP MSS flag. Any change of value for this object will be reflected to cLApTcpMss | 1.3.6.1.4.1.9.9.513.1.16.1.1.25 | Unsigned32 (536..1363) | read-write | current |
| cLApProfileRetransmitCount OBJECT-TYPE This object specifies the retransmission count for the control packet for all APs associated to this particular AP profile. This value represents the number of packets retransmitted after which the Access Point falls back to another controller in case of failover. | 1.3.6.1.4.1.9.9.513.1.16.1.1.26 | Unsigned32 (3..8) | read-write | current |
| cLApProfileRetransmitTimeout OBJECT-TYPE This object specifies the retransmission timeout for the control packet for all APs associated to this particular AP profile. This value represents the timeout for each control Packet of all the Access Points, joined to this retransmission, during the fallback of Access Point to another controller in case of failover. | 1.3.6.1.4.1.9.9.513.1.16.1.1.27 | Unsigned32 (2..5) | read-write | current |
| cLApProfileOeapDisableLocalAccess OBJECT-TYPE This object specifies whether the local access is supported for all the Office Extended Access Points associated to current AP Profile. If set to true, the local SSID and and LAN ports on the OEAP will be disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.28 | TruthValue | read-write | deprecated |
| cLApProfileLedState OBJECT-TYPE This object specifies whether the LED state of all the access points associated to a profile should be enabled or disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.29 | TruthValue | read-write | current |
| cLApProfileRadioInterfaceShutdownEnabled OBJECT-TYPE This object allows the user to enable or disable radio interface of all the APs associated to current AP Profile. When enabled, AP radio's will be shut down when ethernet link goes down for a duration of time set for cLApProfileEthernetInterfaceDowntime. A value of 'true' indicates the AP radio interface shutdown is enabled. A value of 'false' indicates the AP radio interface shutdown is disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.30 | TruthValue | read-write | deprecated |
| cLApProfileEthernetInterfaceDowntime OBJECT-TYPE This object specifies the ethernet interface down time after which the AP radio interface will be shut down for Aps in a profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.31 | Unsigned32 | read-write | deprecated |
| cLApProfileMulticastGroupAddressType OBJECT-TYPE This object specifies the AP multicast group address type. | 1.3.6.1.4.1.9.9.513.1.16.1.1.32 | InetAddressType | read-write | current |
| cLApProfileMulticastGroupAddress OBJECT-TYPE This object specifies the IPv6 multicast group address of all the APs associated to current AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.33 | InetAddress | read-write | current |
| cLApProfileMulticastMode OBJECT-TYPE This object specifies the ethernet multicast support of all the APs associated to current AP Profile. unicast - Controller will convert multicast to unicast packet. multicast - Multicast mode is enabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.34 | INTEGER {unicast(1), multicast(2)} | read-write | current |
| cLApProfilePrimedJoinTimeout OBJECT-TYPE This object specifies the primed timeout for the AP discovery for a given profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.35 | Unsigned32 (0..43200) | read-write | current |
| cLApProfilePreferMode OBJECT-TYPE This object specifies the capwap tunnel prefer-mode for all APs associated to this particular AP Profile. unconfig - capwap tunnel is not established. ipv4 - capwap tunnel established with ipv4 address. ipv6 - capwap tunnel established with ipv6 address. | 1.3.6.1.4.1.9.9.513.1.16.1.1.36 | INTEGER {unconfig(1), ipv4(2), ipv6(3)} | read-write | current |
| cLApProfileApLagEnabled OBJECT-TYPE This object specifies the ap-lag capability state of all the APs associated to current AP profile. A value of 'true' indicates the ap-lag capability state is enabled. A value of 'false' indicates the ap-lag capability state is disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.37 | TruthValue | read-write | current |
| cLApProfile802dot1xAuthenticationEnabled OBJECT-TYPE This object represents the 802.1x supplicant authentication feature of APs associated to current AP Profile. If configured as True, user can configure 8021.1x authentication between lightweight access points and the switch. The access point acts as an 802.1x supplicant and is authenticated by the switch using EAP-FAST with anonymous PAC provisioning.User can set global authentication settings that all access points inherit as they join the controller. This includes all access points that are currently joined to the controller and any that join in the future. If desired, user can override the global authentication settings and assign unique authentication settings for a specific access point. | 1.3.6.1.4.1.9.9.513.1.16.1.1.38 | TruthValue | read-write | deprecated |
| cLApProfile802dot1xSupplicantUsername OBJECT-TYPE This object represents the 802.1x supplicant username that is to be inherited by all the APs associated to current AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.39 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfile802dot1xSupplicantPassword OBJECT-TYPE This object represents the 802.1x supplicant Password that is to be inherited by all the APs associated to current AP Profile. A query on this OID will always return '****'. | 1.3.6.1.4.1.9.9.513.1.16.1.1.40 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileEncryptionEnable OBJECT-TYPE This object specifies whether encyrption between controller and AP is enabled or not in a profile. Encryption can only be enabled if ESM card in controller is pluged in. A value of 'true' enables encryption between controller and AP. A value of 'false' disables encryption between controller and AP. | 1.3.6.1.4.1.9.9.513.1.16.1.1.41 | TruthValue | read-write | current |
| cLApProfileTelnetEnable OBJECT-TYPE This object specifies whether Telnet session can be established to the APs in a given AP profile. A value of 'true' indicates an Telnet session can be established to the APs in a given AP profile. A value of 'false' indicates an Telnet session cannot be established to the APs in a given AP profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.42 | TruthValue | read-write | current |
| cLApProfileSshEnable OBJECT-TYPE This object specifies whether SSH session can be established to the APs asscoaited to an AP Profile. A value of 'true' indicates an SSH session can be established to the APs asscoaited to AP an Profile. A value of 'false' indicates an SSH session cannot be established to the APs asscoaited to an AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.43 | TruthValue | read-write | current |
| cLApProfileHyperlocationEnable OBJECT-TYPE This object represents the admin status of Hyperlocation. A value of 'true' indicates that Hyperlocation is enabled. A value of 'false' indicates that Hyperlocation is disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.44 | TruthValue | read-write | current |
| cLApProfileHyperlocationDetectionThreshold OBJECT-TYPE This object represents the value of the Hyperlocation detection threshold expressed in dBm. Valid range is -100 dbm to -50 dbm. | 1.3.6.1.4.1.9.9.513.1.16.1.1.45 | Integer32 (-100..-50) | read-write | current |
| cLApProfileHyperlocationResetThreshold OBJECT-TYPE This object represents the value of the Hyperlocation reset threshold expressed in scan cycles. Valid range is 0 to 99 scan cycles. Its value must always be smaller than the trigger threshold. | 1.3.6.1.4.1.9.9.513.1.16.1.1.46 | Unsigned32 (0..99) | read-write | current |
| cLApProfileHyperlocationTriggerThreshold OBJECT-TYPE This object represents the value of the Hyperlocation trigger threshold expressed in scan cycles. Valid range is 1 to 100 scan cycles. | 1.3.6.1.4.1.9.9.513.1.16.1.1.47 | Unsigned32 (1..100) | read-write | current |
| cLApProfileHyperlocationNtpIpAddressType OBJECT-TYPE This object represents the NTP server IP address type configured for Hyperlocation feature. | 1.3.6.1.4.1.9.9.513.1.16.1.1.48 | InetAddressType | read-write | current |
| cLApProfileHyperlocationNtpIpAddress OBJECT-TYPE This object represents the NTP server IP address configured for Hyperlocation feature. | 1.3.6.1.4.1.9.9.513.1.16.1.1.49 | InetAddress | read-write | current |
| cLApProfileAdjustMss OBJECT-TYPE To enable the TCP MSS flag | 1.3.6.1.4.1.9.9.513.1.16.1.1.50 | TruthValue | read-write | current |
| cLApProfileDiscoveryTimeout OBJECT-TYPE This object represents the timeout for the AP discovery for a particular AP profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.51 | Unsigned32 (1..10) | read-write | current |
| cLApProfileHeartBeatTimeout OBJECT-TYPE This object represents the Heart beat timeout for the APs in a particular AP profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.52 | Unsigned32 (1..30) | read-write | current |
| cLApProfileCdpEnable OBJECT-TYPE This object specifies to enable the CDP for all APs associated to particular AP Profile | 1.3.6.1.4.1.9.9.513.1.16.1.1.53 | TruthValue | read-write | current |
| cLApProfileApPacketCaptureProfile OBJECT-TYPE This object represents the AP packet capture profile name mapped to this AP join profile. Access Points in this AP join profile will use the parameters of packet capture profile | 1.3.6.1.4.1.9.9.513.1.16.1.1.54 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileRogueReportInterval OBJECT-TYPE This object specifies the rogue report interval, which is the interval that monitor mode APs send rogue detection details to the controller. This value is valid only for the current AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.55 | Unsigned32 (10..300) | read-write | current |
| cLApProfileRogueMinimumRssi OBJECT-TYPE This object specifies the minimum value of RSSI considered for detection of rogues. This value is valid only for the current AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.56 | Integer32 (-128..-70) | read-write | current |
| cLApProfileRogueTransientInterval OBJECT-TYPE This object specifies the rogue transient interval for this AP Profile. A value of '0' specifies that an AP sends rogue detection details to the controller as soon as it detects a rogue. A non-zero value specifies that an AP sends rogue detection details to the controller if it hears the rogue more than once in the specified interval. | 1.3.6.1.4.1.9.9.513.1.16.1.1.57 | Unsigned32 (0 | 120..1800) | read-write | current |
| cLApProfileRogueContainFlexconnect OBJECT-TYPE This object specifies whether Rogue containment of standalone flexconnect APs is enabled in this AP Profile. A value of 'true' enables rogue containment. A value of 'false' disables rogue containment. | 1.3.6.1.4.1.9.9.513.1.16.1.1.58 | TruthValue | read-write | current |
| cLApProfileRogueContainAutoRateEnable OBJECT-TYPE This object specifies whether Rogue containment auto-rate is enabled in this AP Profile. A value of 'true' enables auto-rate. A value of 'false' disables auto-rate. | 1.3.6.1.4.1.9.9.513.1.16.1.1.59 | TruthValue | read-write | current |
| cLApProfileRogueDetectionEnable OBJECT-TYPE This object specifies whether Rogue Detection is enabled in this AP Profile. A value of 'true' enables Rogue Detection. A value of 'false' disables Rogue Detection. Rogue detection is not supported on sniffer and rogue detector mode APs. | 1.3.6.1.4.1.9.9.513.1.16.1.1.60 | TruthValue | read-write | current |
| cLApProfileReportInterval24ghz OBJECT-TYPE This object specifies the interval at which APs connected will send client statitics for 802.11b radio for a particular AP profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.61 | Integer32 (5..90) | read-write | current |
| cLApProfileReportInterval5ghz OBJECT-TYPE This object specifies the interval at which APs connected will send client statitics for 802.11a radio for a particular AP profile | 1.3.6.1.4.1.9.9.513.1.16.1.1.62 | Integer32 (5..90) | read-write | current |
| cLApProfileDot1xApSwitchEapAuth OBJECT-TYPE This object specifies Dot1x EAP type in this AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.63 | INTEGER {eapNone(1), eapFast(2), eapTls(3), peap(4)} | read-write | current |
| cLApProfileDot1xApSwtichLscAuth OBJECT-TYPE This object specifies Dot1x LSC AP Auth type in this AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.64 | INTEGER {authNone(1), authCapwapDtls(2), authDot1xPort(3), authBoth(4)} | read-write | current |
| cLApProfileMeshProfileName OBJECT-TYPE This object uniquely identifies a mesh profile in a particular AP profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.65 | SnmpAdminString (SIZE(1..32)) | read-write | current |
| cLApProfileUsbStatus OBJECT-TYPE This object specifies USB status(enable/disable) to be applied to all APs belonging to this AP join profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.66 | TruthValue | read-write | current |
| cLApProfileVlanTagging OBJECT-TYPE This object specifies whether the Vlan tagging of all the APs associated to current AP Profile should be enabled or disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.67 | TruthValue | read-write | deprecated |
| cLApProfileApCountryCode OBJECT-TYPE This object represents the AP country code mapped to this AP join profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.68 | SnmpAdminString (SIZE(0..32)) | read-write | deprecated |
| cLApProfileExtModuleEnable OBJECT-TYPE This object specifies whether extended module is enabled in this AP Profile. A value of 'true' enables extended module. A value of 'false' disables extended module. | 1.3.6.1.4.1.9.9.513.1.16.1.1.69 | TruthValue | read-write | current |
| cLApProfileStatsTimer OBJECT-TYPE This object specifies the duration of the stats timer value in seconds. | 1.3.6.1.4.1.9.9.513.1.16.1.1.70 | Unsigned32 (0..65535) | read-write | current |
| cLApProfilePoePreStandardSwitchFlag OBJECT-TYPE This object specifies whether the Pre-standard switch state as PoE option. A value of 'true' enables Pre-standard switch. A value of 'false' disables Pre-standard switch. | 1.3.6.1.4.1.9.9.513.1.16.1.1.71 | TruthValue | read-write | current |
| cLApProfilePoePowerInjectorSelection OBJECT-TYPE This object specifies the Power over Ethernet (PoE) injector state for all the APs associated to current AP profile. A value of '1' represents the state of PoE injector is unknown. A value of '2' represents the state of PoE injector is installed. A value of '3' represents the state of PoE injector is override. | 1.3.6.1.4.1.9.9.513.1.16.1.1.72 | INTEGER {unknown(1), installed(2), override(3)} | read-write | current |
| cLApProfilePoeInjectorSwitchMac OBJECT-TYPE This object represents the MAC address of the switch port that has a Power injector. | 1.3.6.1.4.1.9.9.513.1.16.1.1.73 | MacAddress | read-write | current |
| cLApProfileHaloBleBeaconAdvertisedPwr OBJECT-TYPE This object specifies the Power for HALO BLE beacon advertisement. | 1.3.6.1.4.1.9.9.513.1.16.1.1.74 | Unsigned32 (40..100) | read-write | current |
| cLApProfileTftpDownGradeAddressType OBJECT-TYPE This object represents the TFTP servers address type in use. | 1.3.6.1.4.1.9.9.513.1.16.1.1.75 | InetAddressType | read-write | current |
| cLApProfileTftpDownGradeAddress OBJECT-TYPE This object represents the TFTP servers IP address. | 1.3.6.1.4.1.9.9.513.1.16.1.1.76 | InetAddress | read-write | current |
| cLApProfileTftpDownGradeFileName OBJECT-TYPE This object represents the AP image downgrade file name on the TFTP server. | 1.3.6.1.4.1.9.9.513.1.16.1.1.77 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileCoreDumpType OBJECT-TYPE This object specifies whether coredump is enabled and whether it is in compress or uncompress. A value of '1' represents uncompressed form of core dump file. A value of '2' represents compressed form of core dump file. A value of '3' disables the coredump. | 1.3.6.1.4.1.9.9.513.1.16.1.1.78 | INTEGER {uncompress(1), compress(2), disable(3)} | read-write | current |
| cLApProfileCoreDumpTftpAddressType OBJECT-TYPE This object represents the TFTP server address type used for AP core dump transfer. | 1.3.6.1.4.1.9.9.513.1.16.1.1.79 | InetAddressType | read-write | current |
| cLApProfileCoreDumpTftpAddress OBJECT-TYPE This object represents the TFTP server address used for AP core dump transfer. | 1.3.6.1.4.1.9.9.513.1.16.1.1.80 | InetAddress | read-write | current |
| cLApProfileCoreDumpCoreFileName OBJECT-TYPE This object represents core dump file name on the TFTP server. | 1.3.6.1.4.1.9.9.513.1.16.1.1.81 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| cLApProfileBackupFallbackEnabled OBJECT-TYPE This object represents fallback status of APs asscoaited to an AP Profile. A value of 'true' represents AP fallback enabled. A value of 'false' represents AP fallback disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.82 | TruthValue | read-write | current |
| cLApProfileClientRssiStatsEnabled OBJECT-TYPE This object represents the status of Client RSSI statistics from Access Point. A value of 'true' represents Client RSSI statistics reporting from AP is enabled. A value of 'false' represents Client RSSI statistics reporting from AP is disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.83 | TruthValue | read-write | current |
| cLApProfileClientRssiStatsReportInterval OBJECT-TYPE This object represents Client RSSI statistics reporting interval value in seconds. | 1.3.6.1.4.1.9.9.513.1.16.1.1.84 | Unsigned32 (30..300) | read-write | current |
| cLApProfileGasRateLimitEnable OBJECT-TYPE This object represents the GAS limit status of APs associated to an AP Profile. A value of 'true' represents AP GAS limit enabled. A value of 'false' represents AP GAS disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.85 | TruthValue | read-write | current |
| cLApProfileGasRateLimitNumReqPerInterval OBJECT-TYPE This object specifies the maximum number of GAS messages per interval. | 1.3.6.1.4.1.9.9.513.1.16.1.1.86 | INTEGER (1..100) | read-write | current |
| cLApProfileGasRateLimitIntervalMsec OBJECT-TYPE This object specifies the interval for GAS message limit. | 1.3.6.1.4.1.9.9.513.1.16.1.1.87 | INTEGER (100..10000) | read-write | current |
| cLApProfileQoSMapApTrustsUpstreamDSCP OBJECT-TYPE This object specifies whether the APs associated with an AP Profile use the upstream/received DSCP for outer CAPWAP tunnel QoS marking instead of 802.11 User Priority. A value of 'true' represents using the upstream DSCP. A value of 'false' represents not using the upstream DSCP. | 1.3.6.1.4.1.9.9.513.1.16.1.1.88 | TruthValue | read-write | current |
| cLApProfileUdpliteState OBJECT-TYPE This object specifies the capwap tunnel ipv6 UDP-Lite checksum type for all APs associated to this particular AP Profile. unconfig - capwap tunnel is not established. udplite_enabled - capwap tunnel established with ipv6 udplite checksum enabled for data port. udplite_disabled - capwap tunnel established with ipv6 checksum. | 1.3.6.1.4.1.9.9.513.1.16.1.1.89 | INTEGER {unconfig(1), udpliteenabled(2), udplitedisabled(3)} | read-write | current |
| cLApProfileMethodListName OBJECT-TYPE This object specifies the method list used for the AP accounting | 1.3.6.1.4.1.9.9.513.1.16.1.1.90 | SnmpAdminString | read-write | current |
| cLApProfileWindowSize OBJECT-TYPE This object specifies the capwap window size for capwap multiwindow | 1.3.6.1.4.1.9.9.513.1.16.1.1.91 | INTEGER (1..50) | read-write | current |
| cLApProfileCredentialGlobalSecretType OBJECT-TYPE This object specifies the secret password type corresponding to the secret password type represented by cLApProfileCredentialGlobalSecret object. | 1.3.6.1.4.1.9.9.513.1.16.1.1.92 | INTEGER {clear(0), aes(8)} | read-write | current |
| cLApProfileCredentialGlobalPasswordType OBJECT-TYPE This object specifies the secret password type corresponding to the secret password type represented by cLApProfileCredentialGlobalSecret object. | 1.3.6.1.4.1.9.9.513.1.16.1.1.93 | INTEGER {clear(0), aes(8)} | read-write | current |
| cLApProfile802dot1xSupplicantPasswordType OBJECT-TYPE This object specifies the dot1xSupplicant password type corresponding to the dot1xSupplicantPassword represented by cLApProfile802dot1xSupplicantPassword object. | 1.3.6.1.4.1.9.9.513.1.16.1.1.94 | INTEGER {clear(0), aes(8)} | read-write | current |
| cLApProfileBssidEnableStats OBJECT-TYPE This object specifies whether the BSSID stats feature is enabled or disabled per ap config profile - A value of 'true' represents the BSSID stats as enabled. - A Value of 'false' represents the BSSID stats as disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.95 | TruthValue | read-write | current |
| cLApProfileBssidStatsFrequency OBJECT-TYPE This object specifies the BSSID stats frequency set on the AP for sending the stats in the current AP profile | 1.3.6.1.4.1.9.9.513.1.16.1.1.96 | INTEGER | read-write | current |
| cLApProfilePersistentSsidBroadcastEnable OBJECT-TYPE This object specifies whether persistent SSID broadcast is enabled or disabled per ap config profile - A value of 'true' represents persistent SSID broadcast is enabled. - A Value of 'false' represents persistent SSID broadcast is disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.97 | TruthValue | read-write | current |
| cLApProfileDhcpFallback OBJECT-TYPE This object specifies whether the AP fallback to DHCP is enabled or disabled per ap config profile - A value of 'true' represents that AP moves to DHCP if it fails to join controller via static IP. - A Value of 'false' represents that AP will not to DHCP if it fails to join controller via static IP. | 1.3.6.1.4.1.9.9.513.1.16.1.1.98 | TruthValue | read-write | current |
| cLApProfileOeapRogueDetectionEnable OBJECT-TYPE This object specifies whether Rogue Detection is enabled for OEAP. A value of 'true' indicates rogue detection is enabled. A value of 'false' indicates rogue detection is disabled. | 1.3.6.1.4.1.9.9.513.1.16.1.1.99 | TruthValue | read-write | current |
| cLApProfileOeapEncryptionEnable OBJECT-TYPE This object specifies whether encyrption between controller and OEAP is enabled or not in a profile. A value of 'true' enables encryption between controller and AP. A value of 'false' disables encryption between controller and AP. | 1.3.6.1.4.1.9.9.513.1.16.1.1.100 | TruthValue | read-write | current |
| cLApProfileOeapLocalAccessEnable OBJECT-TYPE This object specifies Personal SSID broadcast A value of 'true' enables local access of AP Webui A value of 'false' disables local access of AP Webui. | 1.3.6.1.4.1.9.9.513.1.16.1.1.101 | TruthValue | read-write | current |
| cLApProfileOeapProvSsidEnable OBJECT-TYPE This object specifies Provisional SSID broadcast A value of 'true' enables broadcast of Provisional SSID A value of 'false' disables broadcast of Provisional SSID. | 1.3.6.1.4.1.9.9.513.1.16.1.1.102 | TruthValue | read-write | current |
| cLApProfileCountryCode OBJECT-TYPE This object specifies the country code for all APs associated to this particular AP Profile. | 1.3.6.1.4.1.9.9.513.1.16.1.1.103 | INTEGER {ae(1), al(2), ar(3), at(4), au(5), ba(6), bb(7), bd(8), be(9), bg(10), bh(11), bm(12), bn(13), bo(14), br(15), belarus(16), ca(17), ch(18), cl(19), cm(20), cn(21), co(22), cr(23), cu(24), cy(25), cz(26), de(27), dk(28), do(29), dz(30), ec(31), ee(32), eg(33), el(34), es(35), fi(36), fj(37), fr(38), gb(39), gh(40), gi(41), gr(42), hk(43), hr(44), hu(45), id(46), ie(47), il(48), in(49), io(50), iq(51), is(52), it(53), j2(54), j4(55), jm(56), jo(57), ke(58), kn(59), kw(60), kz(61), lb(62), li(63), lk(64), lt(65), lu(66), lv(67), ly(68), ma(69), mc(70), me(71), mk(72), mn(73), mo(74), mt(75), mx(76), my(77), ng(78), nl(79), no(80), nz(81), om(82), pa(83), pe(84), ph(85), pk(86), pl(87), pr(88), pt(89), py(90), qa(91), ro(92), rs(93), ru(94), sa(95), se(96), sg(97), si(98), sk(99), th(100), ti(101), tn(102), tr(103), tw(104), ua(105), us(106), uy(107), ve(108), vn(109), za(110), unconfigured(111)} | read-write | current |
| cLApProfileHaloBleBeaconTable OBJECT-TYPE This table represents an instance of HALO BLE configuration per AP profile. It lists the HALO BLE beacon parameters which are common for HALO enabled APs that have joined the controller under the same AP profile. | 1.3.6.1.4.1.9.9.513.1.16.2 | not-accessible | current | |
| cLApProfileHaloBleBeaconEntry OBJECT-TYPE This entry contains an instance of HALO BLE beacon configuration for a specific AP profile. It lists the HALO BLE beacon ID, UUID, transmission power, and status per beacon for HALO enabled APs of a particular AP profile that have joined the controller | 1.3.6.1.4.1.9.9.513.1.16.2.1 | not-accessible | current | |
| cLApProfileHaloBleBeaconId OBJECT-TYPE This object represents HALO BLE beacon ID for which BLE configuration to be applied. | 1.3.6.1.4.1.9.9.513.1.16.2.1.1 | Unsigned32 (0..4) | not-accessible | current |
| cLApProfileHaloBleBeaconUuid OBJECT-TYPE This object represents HALO BLE beacon UUID (universally unique identifier) which is a 128-bit value. | 1.3.6.1.4.1.9.9.513.1.16.2.1.2 | SnmpAdminString (SIZE(0..128)) | read-write | current |
| cLApProfileHaloBleBeaconTxPower OBJECT-TYPE This object represents HALO BLE beacon transmission power. The transmission power is based on the size of the required proximity zone. | 1.3.6.1.4.1.9.9.513.1.16.2.1.3 | Unsigned32 (0..52) | read-write | current |
| cLApProfileHaloBleBeaconEnabled OBJECT-TYPE This object specifies the status of HALO BLE beacon. true(1) - enable the HALO BLE beacon, false(2) - disable the HALO BLE beacon. | 1.3.6.1.4.1.9.9.513.1.16.2.1.4 | TruthValue | read-write | current |
| cLApProfileHaloBleBeaconRowStatus OBJECT-TYPE This object specifies the row to be added or deleted in this table. | 1.3.6.1.4.1.9.9.513.1.16.2.1.5 | RowStatus | read-create | current |
| cLApProfileQosMapRangeTable OBJECT-TYPE This table represents an instance of QoS Map configuration per AP profile. It lists the QoS Map DSCP-to-User Priority ranges which are common for APs that have joined the controller under the same AP profile. | 1.3.6.1.4.1.9.9.513.1.16.3 | not-accessible | current | |
| cLApProfileQosMapRangeEntry OBJECT-TYPE This entry contains an instance of QoS Map configuration for a specific AP profile. It lists the QoS Map DSCP lower range, DSCP upper range, 802.11 User Priority and default DSCP for upstream User Priority for APs of a particular AP profile that have joined the controller | 1.3.6.1.4.1.9.9.513.1.16.3.1 | not-accessible | current | |
| cLApProfileQosMapRangeUP OBJECT-TYPE This object represents the 802.11 User Priority for which the DSCP-to-User Priority range configuration is applied. | 1.3.6.1.4.1.9.9.513.1.16.3.1.1 | INTEGER (0..7) | not-accessible | current |
| cLApProfileQosMapRangeDSCPLower OBJECT-TYPE This object represents the DSCP lower range for which the DSCP-to-User Priority range configuration is applied on the AP using an AP profile. | 1.3.6.1.4.1.9.9.513.1.16.3.1.2 | INTEGER (0..63) | read-create | current |
| cLApProfileQosMapRangeDSCPUpper OBJECT-TYPE This object represents the DSCP upper range for which the DSCP-to-User Priority range configuration is applied on the AP using an AP profile. | 1.3.6.1.4.1.9.9.513.1.16.3.1.3 | INTEGER (0..63) | read-create | current |
| cLApProfileQosMapRangeUPToDSCP OBJECT-TYPE This object represents the DSCP value which should be used for the upstream 802.11 User Priority on the AP using an AP profile. | 1.3.6.1.4.1.9.9.513.1.16.3.1.4 | INTEGER (0..63) | read-create | current |
| cLApProfileQosMapRangeRowStatus OBJECT-TYPE This object specifies the row to be added or deleted in this table. | 1.3.6.1.4.1.9.9.513.1.16.3.1.5 | RowStatus | read-create | current |
| cLApProfileQosMapExceptionTable OBJECT-TYPE This table represents an instance of QoS Map configuration per AP profile. It lists the QoS Map DSCP-to-User Priority exceptions which are common for APs that have joined the controller under the same AP profile. | 1.3.6.1.4.1.9.9.513.1.16.4 | not-accessible | current | |
| cLApProfileQosMapExceptionEntry OBJECT-TYPE This table represents an instance of QoS Map configuration per AP profile. It lists the QoS Map DSCP-to-User Priority exceptions which are common for APs that have joined the controller under the same AP profile. | 1.3.6.1.4.1.9.9.513.1.16.4.1 | not-accessible | current | |
| cLApProfileQosMapExceptionDSCP OBJECT-TYPE This object represents the DSCP value for the DSCP to 802.11 User Priority mapping exception for the APs that joined the controller under the same AP profile. | 1.3.6.1.4.1.9.9.513.1.16.4.1.1 | INTEGER (0..63) | not-accessible | current |
| cLApProfileQosMapExceptionUP OBJECT-TYPE This object represents the 802.11 User Priority value for the DSCP to 802.11 User Priority mapping exception for the APs that joined the controller under the same AP profile. | 1.3.6.1.4.1.9.9.513.1.16.4.1.2 | INTEGER (0..7) | read-create | current |
| cLApProfileQosMapExceptionRowStatus OBJECT-TYPE This object specifies the row to be added or deleted in this table. | 1.3.6.1.4.1.9.9.513.1.16.4.1.3 | RowStatus | read-create | current |
| ciscoLwappApPacketCapture OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.17 | |||
| cLApPacketCaptureProfileTable OBJECT-TYPE This table provides the information about the packet capture parameters for the 802.11 LWAPP Access Points. Rows are added to this table whenever, new profiles are added to this controller, and rows are deleted whenever profiles gets deleted from the controller. | 1.3.6.1.4.1.9.9.513.1.17.1 | not-accessible | current | |
| cLApPacketCaptureProfileEntry OBJECT-TYPE Each entry in this table provides information about the packet capture profile configured on the controller. | 1.3.6.1.4.1.9.9.513.1.17.1.1 | not-accessible | current | |
| cLApPacketCaptureProfileName OBJECT-TYPE This object represents the profile name for ap packet capture profile. The parameters of packet capture profile are used while capturing packets on the Access Point for the specified wireless client. | 1.3.6.1.4.1.9.9.513.1.17.1.1.1 | SnmpAdminString (SIZE(0..32)) | not-accessible | current |
| cLApPacketCaptureProfileRowStatus OBJECT-TYPE Used to add or delete an entry in this table. | 1.3.6.1.4.1.9.9.513.1.17.1.1.2 | RowStatus | read-create | current |
| cLApPacketCaptureProfileBufferSize OBJECT-TYPE This object specifies the size of the buffer Access Point should use to copy the captured packets for client and dump it to the FTP server. | 1.3.6.1.4.1.9.9.513.1.17.1.1.3 | Unsigned32 (1024..4096) | read-write | current |
| cLApPacketCaptureProfileDuration OBJECT-TYPE This object specifies the duration for which the Access Point should capture packets for specified client. | 1.3.6.1.4.1.9.9.513.1.17.1.1.4 | Unsigned32 (1..60) | read-write | current |
| cLApPacketCaptureProfileTruncation OBJECT-TYPE This object specifies the length of the packet after truncation while capturing packets on the Access Point. Default value is 0 which indictaes captured packet should contain the full payload length. | 1.3.6.1.4.1.9.9.513.1.17.1.1.5 | Unsigned32 (0..1500) | read-write | current |
| cLApPacketCaptureProfileFtpServerAddressType OBJECT-TYPE This object specifies the type of the ftp server IP Address made available through cLApPacketCaptureProfileEntry. | 1.3.6.1.4.1.9.9.513.1.17.1.1.6 | InetAddressType | read-write | current |
| cLApPacketCaptureProfileFtpServerAddress OBJECT-TYPE This object specifies the IP Address of the FTP server. Access Point will dump the captured packets to a file in this ftp server. | 1.3.6.1.4.1.9.9.513.1.17.1.1.7 | InetAddress | read-write | current |
| cLApPacketCaptureProfileFtpServerPath OBJECT-TYPE This object specifies the directory path in the ftp server for storing the file which contains the captured packets in the Access Point. | 1.3.6.1.4.1.9.9.513.1.17.1.1.8 | SnmpAdminString | read-write | current |
| cLApPacketCaptureProfileFtpUsername OBJECT-TYPE This object specifies the username to login into the ftp server in order to transfer the captured packets from the Access Point. | 1.3.6.1.4.1.9.9.513.1.17.1.1.9 | SnmpAdminString | read-write | current |
| cLApPacketCaptureProfileFtpPassword OBJECT-TYPE This object specifies the password to login into the ftp server in order to transfer the captured packets from the Access Point. | 1.3.6.1.4.1.9.9.513.1.17.1.1.10 | SnmpAdminString | read-write | current |
| cLApPacketCaptureProfileClassifierArp OBJECT-TYPE This object specifies the filters for ARP packets while capturing packets on the Access Point. A value of 'true' indicates ARP packets should be captured. A value of 'false' indicates ARP packets shouldn't be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.11 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierBroadcast OBJECT-TYPE This object specifies the filters for 802.11 Broadcast packets, while capturing packets on the Access Point. A value of 'true' indicates Broadcast packets should be captured. A value of 'false' indicates Broadcast packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.12 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierControl OBJECT-TYPE This object specifies the filters for 802.11 control packets, while capturing packets on the Access Point under AP Profile which is making use of this packet capture profile. A value of 'true' indicates 802.11 control packets should be captured. A value of 'false' indicates 802.11 control packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.13 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierData OBJECT-TYPE This object specifies the filters for 802.11 Data packets, while capturing packets on the Access Point under AP Profile which is making use of this packet capture profile. A value of 'true' indicates 802.11 Data packets should be captured. A value of 'false' indicates 802.11 Data packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.14 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierDot1x OBJECT-TYPE This object specifies the filters for 802.11 Dot1x packets, while capturing packets on the Access Point under AP Profile which is making use of this packet capture profile. A value of 'true' indicates 802.11 Dot1x packets should be captured. A value of 'false' indicates 802.11 Dot1x packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.15 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierIapp OBJECT-TYPE This object specifies the filters for 802.11 IAPP packets, while capturing packets on the Access Point under AP Profile which is making use of this packet capture profile. A value of 'true' indicates IAPP packets should be captured. A value of 'false' indicates IAPP packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.16 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierIp OBJECT-TYPE This object specifies the filters for IP packets, while capturing packets on the Access Point. A value of 'true' indicates IP packets should be captured. A value of 'false' indicates IP packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.17 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierManagement OBJECT-TYPE This object specifies the filters for 802.11 Management packets, while capturing packets on the Access Point. A value of 'true' indicates 802.11 Management packets should be captured. A value of 'false' indicates 802.11 Management packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.18 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierMulticast OBJECT-TYPE This object specifies the filters for 802.11 Multicast packets, while capturing packets on the Access Point. A value of 'true' indicates Multicast packets should be captured. A value of 'false' indicates Multicast packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.19 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierTcp OBJECT-TYPE This object specifies the filters for TCP packets, while capturing packets on the Access Point. Value of 'true' indicates IP packets should be captured. Value of 'false' indicates IP packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.20 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierUdp OBJECT-TYPE This object specifies the filters for TCP packets, while capturing packets on the Access Point. Value of 'true' indicates IP packets should be captured. Value of 'false' indicates IP packets should not be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.21 | TruthValue | read-write | current |
| cLApPacketCaptureProfileClassifierTcpPort OBJECT-TYPE This object specifies the filter value port number for TCP packets, while capturing packets on the Access Point. Default value is 0 which indicates all TCP packets should be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.22 | InetPortNumber (0..65535) | read-write | current |
| cLApPacketCaptureProfileClassifierUdpPort OBJECT-TYPE This object specifies the filter value port number for UDP packets, while capturing packets on the Access Point under AP Profile which is making use of this packet capture profile. Default value is 0 which indicates all UDP packets should be captured. | 1.3.6.1.4.1.9.9.513.1.17.1.1.23 | InetPortNumber (0..65535) | read-write | current |
| cLApPacketCaptureClientTable OBJECT-TYPE This table provides information about the status of packet capture already in progress on per Client basis. Rows are added to this table whenever, packet capture is started for a new client, and rows are deleted whenever packet capture gets stopped for a particular Client. | 1.3.6.1.4.1.9.9.513.1.17.2 | not-accessible | current | |
| cLApPacketCaptureClientEntry OBJECT-TYPE Each entry in this table provides information about packet capture session currently going on for a client on 802.11 LWAPP Access Point that has joined the controller. | 1.3.6.1.4.1.9.9.513.1.17.2.1 | not-accessible | current | |
| cLApPacketCaptureClientDeviceMac OBJECT-TYPE This object represents the mac address of the client for which packet capture should be started on the Access Point. Access Point will check for this mac address while capturing packets. | 1.3.6.1.4.1.9.9.513.1.17.2.1.1 | MacAddress | not-accessible | current |
| cLApPacketCaptureClientApMacAddress OBJECT-TYPE This object represents the base radio mac address of the Access Point on which packet capture should be started. This will be used only in case of static mode but, it is mandatory to populate this in static mode as well. | 1.3.6.1.4.1.9.9.513.1.17.2.1.2 | MacAddress | read-write | current |
| cLApPacketCaptureClientAutoMode OBJECT-TYPE This object specifies the mode for packet capture. A value of 'true' indicates packet capture should be started in auto mode, which means capture will be started on the Access Point on which device is currently connected and also on the nearby Access Points which appear in the RRM neighbor lists of present Access Point. A value of 'false' indicates packet capture should be started only on the specified Access Point. | 1.3.6.1.4.1.9.9.513.1.17.2.1.3 | TruthValue | read-write | current |
| cLApPacketCaptureClientStartStop OBJECT-TYPE This object specifies the trigger to start or stop packet capture for the client. A value of '1' indicates packet capture should be started. A value of '2' indicates packet capture should be stopped. | 1.3.6.1.4.1.9.9.513.1.17.2.1.4 | INTEGER {idle(1), start(2), stop(3)} | read-write | current |
| cLApPacketCaptureClientSiteName OBJECT-TYPE This object represents the name of the site on which the specific device or the Access Point is present. | 1.3.6.1.4.1.9.9.513.1.17.2.1.5 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| cLApPacketCaptureClientRowStatus OBJECT-TYPE This oject specifies to the addition or deletion of an entry in this table. When an entry is added, packet capture will be started for the specified device. When an entry is deleted, packet capture will be stopped for the specified device. | 1.3.6.1.4.1.9.9.513.1.17.2.1.6 | RowStatus | read-create | current |
| cLApPacketCaptureApTable OBJECT-TYPE This table provides information about the status of packet capture already in progress on a per AP, per Client basis. Rows are added to this table whenever, packet capture is started for a client on a new AP, and rows are deleted whenever packet capture gets stopped on a particular AP. | 1.3.6.1.4.1.9.9.513.1.17.3 | not-accessible | current | |
| cLApPacketCaptureApEntry OBJECT-TYPE Each entry in this table provides information about status of packet capture already in progress on the specific AP. | 1.3.6.1.4.1.9.9.513.1.17.3.1 | not-accessible | current | |
| cLApPacketCaptureApDeviceMac OBJECT-TYPE This object specifies the mac address of the device for which packet capture was started on the Access Point. Access Point will check for this mac address while capturing packets. | 1.3.6.1.4.1.9.9.513.1.17.3.1.1 | MacAddress | read-only | current |
| cLApPacketCaptureApMacAddress OBJECT-TYPE This object specifies the base radio mac address of the Access Point on which packet capture was started for the specific device. | 1.3.6.1.4.1.9.9.513.1.17.3.1.2 | MacAddress | read-only | current |
| cLApPacketCaptureApStatus OBJECT-TYPE This object specifies the status of the packet capture. A value of 'true' indicates packet capture has been started for the specified device on the specific Access Point, A value of 'false' indicates packet capture is not started for the specified device on the specific Access Point. | 1.3.6.1.4.1.9.9.513.1.17.3.1.3 | TruthValue | read-only | current |
| ciscoLwappApNtpInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.18 | |||
| cLAPNtpInfoTable OBJECT-TYPE This table represents collection of NTP-Server information received from AP. | 1.3.6.1.4.1.9.9.513.1.18.1 | not-accessible | current | |
| cLAPNtpInfoEntry OBJECT-TYPE Each entry in cLAPNtpInfoTable corresponds NTP-server information for a particular AP. | 1.3.6.1.4.1.9.9.513.1.18.1.1 | not-accessible | current | |
| cLAPNtpInfoState OBJECT-TYPE This object specifies whether NTP service is enabled or disabled at AP. A value 'true' means NTP server is running at AP. A value 'false' means NTP server is not running at AP | 1.3.6.1.4.1.9.9.513.1.18.1.1.1 | TruthValue | read-only | current |
| cLApNtpInfoStatus OBJECT-TYPE This object specifies the NTP server status for AP | 1.3.6.1.4.1.9.9.513.1.18.1.1.2 | CLApNtpStatus | read-only | current |
| cLAPNtpInfoStratum OBJECT-TYPE This object specifies NTP server stratum for AP. The object value is only applicable when cLAPNtpInfoState is 'true' and cLApNtpInfoStatus is other than none. | 1.3.6.1.4.1.9.9.513.1.18.1.1.3 | Unsigned32 | read-only | current |
| cLAPNtpInfoLastSync OBJECT-TYPE This object specifies AP last synced time with NTP server in seconds. The object value is only applicable when cLAPNtpInfoState is 'true' and cLApNtpInfoStatus is other than none. | 1.3.6.1.4.1.9.9.513.1.18.1.1.4 | Unsigned32 | read-only | current |
| cLAPNtpInfoOffset OBJECT-TYPE This object specifies NTP server offset in micro-seconds for AP. The object value is only applicable when cLAPNtpInfoState is 'true' and cLApNtpInfoStatus is other than none. | 1.3.6.1.4.1.9.9.513.1.18.1.1.5 | Integer32 | read-only | current |
| cLAPNtpInfoIPAddressType OBJECT-TYPE This object specifies the NTP server IP address type (ipv4 or ipv6) currently configured at AP. The object value is only applicable when cLAPNtpInfoState is 'true' and cLApNtpInfoStatus is other than none. | 1.3.6.1.4.1.9.9.513.1.18.1.1.6 | InetAddressType | read-only | current |
| cLAPNtpInfoIPAddress OBJECT-TYPE This object specifies the NTP server IP address currently configured at AP. The object value is only applicable when cLAPNtpInfoState is 'true' and cLApNtpInfoStatus is other than none. | 1.3.6.1.4.1.9.9.513.1.18.1.1.7 | InetAddress | read-only | current |
| ciscoLwappAp11axRadioConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.21 | |||
| cLAp11axRadioConfigTable OBJECT-TYPE This table represents the radio configuration of 11ax Access Points | 1.3.6.1.4.1.9.9.513.1.21.1 | not-accessible | current | |
| cLAp11axRadioConfigEntry OBJECT-TYPE Each entry in cLAp11axRadioConfigTable corresponds to an 11ax Access Point radio configuration. | 1.3.6.1.4.1.9.9.513.1.21.1.1 | not-accessible | current | |
| cLAp11axDualRadioCapable OBJECT-TYPE This object represents whether radio is dual radio capable or not. A value of 'true' indicates the radio is dual mode capable. A value of 'false' indicates the radio is not dual mode capable. | 1.3.6.1.4.1.9.9.513.1.21.1.1.1 | TruthValue | read-only | current |
| cLAp11axRadioFRACapable OBJECT-TYPE This object represents whether radio is FRA capable or not. A value of 'true' indicates the radio is FRA Capable. A value of 'false' indicates the radio is not FRA capable. | 1.3.6.1.4.1.9.9.513.1.21.1.1.2 | TruthValue | read-only | current |
| cLAp11axDualRadioOperation OBJECT-TYPE This object specifies dual radio mode operation of the slot. auto - Dual radio mode is automatic. manual - Dual radio mode is configurable manually. none - Radio is not dual radio mode capable. | 1.3.6.1.4.1.9.9.513.1.21.1.1.3 | INTEGER {auto(1), manual(2), none(3)} | read-write | current |
| cLAp11axDualRadioMode OBJECT-TYPE This object specifies dual radio mode status of radio enabled - Dual radio mode is enabled. disabled- Dual radio mode is disabled. none - Radio is not dual radio mode capable. | 1.3.6.1.4.1.9.9.513.1.21.1.1.4 | INTEGER {enabled(1), disabled(2), none(3)} | read-write | current |
| cLAp11axRadioRoleOperation OBJECT-TYPE This object specifies the radio role operation of the slot. auto - Radio role assignment is automatic. manual - Radio role assignment is manual. none - Radio role assignment is neither manual nor automatic. | 1.3.6.1.4.1.9.9.513.1.21.1.1.5 | INTEGER {auto(1), manual(2), none(3)} | read-write | current |
| cLAp11axRadioRole OBJECT-TYPE This object specifies the role for the slot. local - The means the slot is capable of serving clients. monitor - The slot does not serves client, only monitors. none - The slot is neither client serving nor monitor. | 1.3.6.1.4.1.9.9.513.1.21.1.1.6 | INTEGER {clientserving(1), monitor(2), none(3)} | read-write | current |
| cLAp11axObssPdCapable OBJECT-TYPE This object represents whether the radio is 802.11ax OBSS PD capable or not. A value of 'true' indicates the radio is OBSS PD capable. A value of 'false' indicates the radio is not OBSS PD capable. | 1.3.6.1.4.1.9.9.513.1.21.1.1.7 | TruthValue | read-only | current |
| cLAp11axObssPdSrgCapable OBJECT-TYPE This object represents whether the radio is 802.11ax SRG OBSS PD capable or not. A value of 'true' indicates the radio is SRG OBSS PD capable. A value of 'false' indicates the radio is not SRG OBSS PD capable. | 1.3.6.1.4.1.9.9.513.1.21.1.1.8 | TruthValue | read-only | current |
| ciscoLwappApSlotWlanStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.1.22 | |||
| cLApSlotWlanStatsTable OBJECT-TYPE This table represents Per-AP, Per-Slot, Per-SSID Stats information of packets/bytes sent/received, retransmission counter, associated clients counter, etc. | 1.3.6.1.4.1.9.9.513.1.22.1 | not-accessible | current | |
| cLApSlotWlanStatsEntry OBJECT-TYPE This entry contains stats information of packets/bytes sent/received, retransmission counter, associated clients counter, and etc. | 1.3.6.1.4.1.9.9.513.1.22.1.1 | not-accessible | current | |
| cLApSlotWlanStatsTxPktNum OBJECT-TYPE This object represents the transmitted packets counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.22.1.1.1 | Counter64 | read-only | current |
| cLApSlotWlanStatsTxOctetNum OBJECT-TYPE This object represents the transmitted bytes counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.22.1.1.2 | Counter64 | read-only | current |
| cLApSlotWlanStatsRxPktNum OBJECT-TYPE This object represents the received packets counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.22.1.1.3 | Counter64 | read-only | current |
| cLApSlotWlanStatsRxOctetNum OBJECT-TYPE This object represents the received bytes counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.22.1.1.4 | Counter64 | read-only | current |
| cLApSlotWlanStatsRetransmitNum OBJECT-TYPE This object represents the packet retransmission counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.22.1.1.5 | Counter64 | read-only | current |
| cLApSlotWlanStatsAssocClientNum OBJECT-TYPE This object represents the associated client counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.22.1.1.6 | Unsigned32 | read-only | current |
| cLApSlotWlanStatsOnlineUserNum OBJECT-TYPE This object represents the online user counter of the specific radio and wlan on this access point. | 1.3.6.1.4.1.9.9.513.1.22.1.1.7 | Unsigned32 | read-only | current |
| ciscoLwappApMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.2 | |||
| ciscoLwappApMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.2.1 | |||
| ciscoLwappApMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.2.2 | |||
| ciscoLwappApMIBNotifObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.3 | |||
| cLApAssocFailureReason OBJECT-TYPE This object specifies the failure reasons when a AP fails to associate with a controller. | 1.3.6.1.4.1.9.9.513.3.1 | CLApAssocFailureReason | accessible-for-notify | current |
| cLApRogueApMacAddress OBJECT-TYPE This object represents the radio MAC address common to the dot11 interfaces of the rogue AP. | 1.3.6.1.4.1.9.9.513.3.2 | MacAddress | accessible-for-notify | current |
| cLApDot11RadioChannelNumber OBJECT-TYPE This object represents the channel number of the radio interface of the AP, represented by cLApDot11IfType. | 1.3.6.1.4.1.9.9.513.3.3 | CLDot11Channel | accessible-for-notify | current |
| cLApRogueApSsid OBJECT-TYPE This object represents the SSID used by the rogue AP to intrude the network. | 1.3.6.1.4.1.9.9.513.3.4 | SnmpAdminString | accessible-for-notify | current |
| cLApRogueType OBJECT-TYPE This object represents the SSID of the used by the rogue AP to intrude the network. | 1.3.6.1.4.1.9.9.513.3.5 | INTEGER {asleap(1), honeypot(2), other(3)} | accessible-for-notify | current |
| cLApWipsReason OBJECT-TYPE This object specifies the failure reasons for an AP when cLApWipsEnable is set to 'true'. noMonitoringDevice - No monitoring device connected to collect WIPs information. | 1.3.6.1.4.1.9.9.513.3.6 | INTEGER {noMonitoringDevice(1)} | accessible-for-notify | current |
| cLApWipsClear OBJECT-TYPE This object specifies whether this event is raise or clear. A value of 'true' indicates this event is cleared A value of 'false' indicates this even is raised. | 1.3.6.1.4.1.9.9.513.3.7 | TruthValue | accessible-for-notify | current |
| cLApIfUpDownFailureType OBJECT-TYPE This object specifies the type of the AP interface failure. detectedFailure(1) - Failure of radio. configuredReset(2) - Reset due to manual configuration. | 1.3.6.1.4.1.9.9.513.3.8 | INTEGER {detectedFailure(1), configuredReset(2)} | accessible-for-notify | current |
| cLApIfUpDownCause OBJECT-TYPE This object specifies the cause of the AP interface failure. | 1.3.6.1.4.1.9.9.513.3.9 | SnmpAdminString | accessible-for-notify | current |
| cLApIfUpDownFailureCode OBJECT-TYPE This object specifies the code of the AP interface failure. | 1.3.6.1.4.1.9.9.513.3.10 | SnmpAdminString | accessible-for-notify | current |
| cLApAlarmSet OBJECT-TYPE This object specifies whether this event is raise or clear. A value of 'true' indicates this event is set. A value of 'false' indicates this even is cleared. | 1.3.6.1.4.1.9.9.513.3.11 | TruthValue | accessible-for-notify | current |
| cLApRogueClassType OBJECT-TYPE This object specifies the AP class type of the Rogue AP detected. | 1.3.6.1.4.1.9.9.513.3.12 | INTEGER {pending(0), friendly(1), malicious(2), unclassified(3), custom(4)} | accessible-for-notify | current |
| cLApRogueDetectedChannel OBJECT-TYPE This object represents the rogue detected channel number. | 1.3.6.1.4.1.9.9.513.3.13 | CLDot11Channel | accessible-for-notify | current |
| cLApRSSI OBJECT-TYPE This object specifies the Rogue RSSI as seen by AP Interface. | 1.3.6.1.4.1.9.9.513.3.14 | Integer32 | accessible-for-notify | current |
| cLApSNR OBJECT-TYPE This object specifies the SNR seen by AP Interface from Rogue | 1.3.6.1.4.1.9.9.513.3.15 | Integer32 | accessible-for-notify | current |
| cLApDot11RadioCurrentChannel OBJECT-TYPE This object represents the dot11 current channel. | 1.3.6.1.4.1.9.9.513.3.16 | CLDot11Channel | accessible-for-notify | current |
| cLApAdhocRogue OBJECT-TYPE This object represents the flag used to state if the rogue found is an Adhoc rogue or it is an AP. | 1.3.6.1.4.1.9.9.513.3.17 | TruthValue | accessible-for-notify | current |
| cLApRogueAPOnWiredNetwork OBJECT-TYPE This object represents the flag used to state if the rogue is found on the wired network. A value of '1' indicates Rogue AP is found on wired network. A value of '0' indicates Rogue AP is not found on wired network. | 1.3.6.1.4.1.9.9.513.3.18 | TruthValue | accessible-for-notify | current |
| cLApRogueMode OBJECT-TYPE This attribute is use to specify the state in which the Rogue AP is user can set the Rogue AP in alert, known or acknowledge state. Alert state means Rogue AP can be a potential threat, trap will be sent out to trap recipients. Known state means its just internal AP which is not on the same Switch. Acknowledge state means an external AP whose existence is acceptable and not a threat (probably some other company's AP). Contained means containement is initiated and ongoing. Threat is usually the state when the rogue is found on wired network. known(4), knownContained(9) and trustedMissing(10) will appear in known rogue list. known rogues can be pre provisioned and known rogues state can be changed to alert(2). | 1.3.6.1.4.1.9.9.513.3.19 | INTEGER {initializing(0), pending(1), alert(2), detectedLrad(3), known(4), acknowledge(5), contained(6), threat(7), containedPending(8), knownContained(9), trustedMissing(10)} | accessible-for-notify | current |
| cLApRogueIsClassifiedByRule OBJECT-TYPE This object represents the flag used to state if the rogue is classified by a rogue rule. A value of 'true' indicates its classifed by rogue rule. A value of 'false' indicates its not classified by rogue rule. | 1.3.6.1.4.1.9.9.513.3.20 | TruthValue | accessible-for-notify | current |
| cLApRogueClassifiedApMacAddress OBJECT-TYPE This object represents the radio MAC address of the classified rogue AP. | 1.3.6.1.4.1.9.9.513.3.21 | MacAddress | accessible-for-notify | current |
| cLApRogueClassifiedRSSI OBJECT-TYPE This object represents the Rogue classified RSSI as seen by Airespace AP Interface. | 1.3.6.1.4.1.9.9.513.3.22 | Integer32 | accessible-for-notify | current |
| cLAPPreviousMonitorMode OBJECT-TYPE This object represents the previous AP monitor Mode. | 1.3.6.1.4.1.9.9.513.3.23 | CLApMode | accessible-for-notify | current |
| cLAPCurrentMonitorMode OBJECT-TYPE This object represents the current AP monitor Mode. | 1.3.6.1.4.1.9.9.513.3.24 | CLApMode | accessible-for-notify | current |
| cLApSsidKeyConfSsidA OBJECT-TYPE This object represents the SSID which has same cipher key with another SSID on the same AP. The another SSID is represented by cLApSsidKeyConfSsidB. | 1.3.6.1.4.1.9.9.513.3.25 | SnmpAdminString | accessible-for-notify | current |
| cLApSsidKeyConfKeyIdxA OBJECT-TYPE This object represents key index of the SSID which has same cipher key with another SSID on the same AP. It is the key index of cLApSsidKeyConfSsidA. The another SSID is represented by cLApSsidKeyConfSsidB. | 1.3.6.1.4.1.9.9.513.3.26 | Unsigned32 | accessible-for-notify | current |
| cLApSsidKeyConfSsidB OBJECT-TYPE This object represents the SSID which has same cipher key with another SSID on the same AP. The another SSID is represented by cLApSsidKeyConfSsidA. | 1.3.6.1.4.1.9.9.513.3.27 | SnmpAdminString | accessible-for-notify | current |
| cLApSsidKeyConfKeyIdxB OBJECT-TYPE This object represents key index of the SSID which has same cipher key with another SSID on the same AP. It is the key index of cLApSsidKeyConfSsidB. The another SSID is represented by cLApSsidKeyConfSsidA. | 1.3.6.1.4.1.9.9.513.3.28 | Unsigned32 | accessible-for-notify | current |
| cLApPreviousChannel OBJECT-TYPE This object represents the channel before changed. | 1.3.6.1.4.1.9.9.513.3.29 | Unsigned32 | accessible-for-notify | current |
| cLApCurrentChannel OBJECT-TYPE This object represents the channel after changed. | 1.3.6.1.4.1.9.9.513.3.30 | Unsigned32 | accessible-for-notify | current |
| cLApChannelCustomize OBJECT-TYPE This object represents the channel's change mode. If this value is true, then bsnAPDot11CurrentChannel in bsnAPIfDot11PhyDSSSTable is assigned by dynamic algorithm and is read-only. | 1.3.6.1.4.1.9.9.513.3.31 | INTEGER {automatic(1), customized(2)} | accessible-for-notify | current |
| cLApIfLoadChannelUtilization OBJECT-TYPE This object specifies the code of the AP Interface channel load utilization. | 1.3.6.1.4.1.9.9.513.3.32 | Integer32 (0..65535) | accessible-for-notify | current |
| cLAPGroupVlanName OBJECT-TYPE This object specifies the code of the AP Group Interface Name. | 1.3.6.1.4.1.9.9.513.3.33 | OCTET STRING (SIZE(0..255)) | accessible-for-notify | current |
| cLApRuleName OBJECT-TYPE This object represents the rule name to identify applied on the Ap. | 1.3.6.1.4.1.9.9.513.3.34 | SnmpAdminString (SIZE(1..32)) | accessible-for-notify | current |
| cLApSeverityScore OBJECT-TYPE This object is used to define the custom classification severity score of the rules. This object is applicable when cLRuleRogueType is configured as 'custom'. | 1.3.6.1.4.1.9.9.513.3.35 | Unsigned32 | accessible-for-notify | current |
| cLApDot11XorRadioRoleChangeReason OBJECT-TYPE This object is used to identify the reason code for radio role change of XOR radio. | 1.3.6.1.4.1.9.9.513.3.36 | INTEGER {none(1), auto(2), manual(3)} | accessible-for-notify | current |
| cLApDot11XorRadioBandChangeReason OBJECT-TYPE This object is used to identify the reason code for radio band change of XOR radio. | 1.3.6.1.4.1.9.9.513.3.37 | INTEGER {none(1), coverageHole(2), hyperlocation(3), revert(4), fra(5), manual(6)} | accessible-for-notify | current |
| cLApBrokenAntApName OBJECT-TYPE This object represents the AP name of the trap with broken antenna info. | 1.3.6.1.4.1.9.9.513.3.38 | OCTET STRING (SIZE(0..32)) | accessible-for-notify | current |
| cLApBrokenAntInfo OBJECT-TYPE This object represents the condition of antenna for a given AP. It denotes if AP antenna are broken or not; if broken, then which particular antenna (like ALL/A/B/C/D/AB/BC...) broken will be mentioned. | 1.3.6.1.4.1.9.9.513.3.39 | OCTET STRING (SIZE(0..32)) | accessible-for-notify | current |
| cLApRogueDot11RadioBand OBJECT-TYPE This object represents the radio band of the Rouge AP. | 1.3.6.1.4.1.9.9.513.3.40 | CLDot11Band | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| ciscoLwappApIfRegulatoryDomainMismatchNotif NOTIFICATION-TYPE This notification is generated if an AP radio's regulatory domain doesn't match the country the controller is configured for. Due to the mismatch, the AP will fail to associate with the controller. | 1.3.6.1.4.1.9.9.513.0.1 | current |
| ciscoLwappApCrash NOTIFICATION-TYPE This notification is generated after an AP rejoins the controller after a crash. Once the AP joins, the controller will get the crash file from the AP and sends this notification. | 1.3.6.1.4.1.9.9.513.0.2 | obsolete |
| ciscoLwappApUnsupported NOTIFICATION-TYPE This notification is generated after an unsupported AP tries to join the controller. | 1.3.6.1.4.1.9.9.513.0.3 | current |
| ciscoLwappApAssociated NOTIFICATION-TYPE This notification is generated whenever an AP joins the controller successfully. This notification contains information about the last reboot reason and Data Encryption status of the AP. | 1.3.6.1.4.1.9.9.513.0.4 | current |
| ciscoLwappApPower NOTIFICATION-TYPE This notification is generated whenever an AP detects low power from Ethernet. | 1.3.6.1.4.1.9.9.513.0.5 | current |
| ciscoLwappApRogueApDetected NOTIFICATION-TYPE This notification is generated whenever a rogue AP is detected. | 1.3.6.1.4.1.9.9.513.0.6 | current |
| ciscoLwappApRogueApCleared NOTIFICATION-TYPE This notification is generated whenever a rogue AP was detected and then subsequently if its been removed from the network. | 1.3.6.1.4.1.9.9.513.0.7 | current |
| ciscoLwappApWipsNotification NOTIFICATION-TYPE This notification is generated whenever a controller detects a WIPS event. | 1.3.6.1.4.1.9.9.513.0.8 | current |
| ciscoLwappApNoDownlinkChannelNotify NOTIFICATION-TYPE This notification is generated when ever AP fails to find new downlink channel. | 1.3.6.1.4.1.9.9.513.0.9 | current |
| ciscoLwappApIfUpNotify NOTIFICATION-TYPE This notification is generated when AP's Interface operational status goes up. | 1.3.6.1.4.1.9.9.513.0.10 | current |
| ciscoLwappApIfDownNotify NOTIFICATION-TYPE This notification is generated when AP's Interface operational status goes down. | 1.3.6.1.4.1.9.9.513.0.11 | current |
| ciscoLwappApClientThresholdNotify NOTIFICATION-TYPE This notification is generated when the number of clients on the AP's Radio Interface exceeds the limit defined in cLRFProfileHDClientTrapThreshold. | 1.3.6.1.4.1.9.9.513.0.12 | current |
| ciscoLwappApUpgradeFailureNotify NOTIFICATION-TYPE This notification is generated when AP image upgrade failed. | 1.3.6.1.4.1.9.9.513.0.13 | current |
| ciscoLwappApCpuUsageHigh NOTIFICATION-TYPE This notification generates when an AP detects its CPU usage is higher than the threshold configured in clsSysApCpuUsageThreshold, with cLApAlarmSet set to true. When this AP's CPU usage falls below the threshold lately, this notification is generated with cLApAlarmSet set to false. | 1.3.6.1.4.1.9.9.513.0.14 | current |
| ciscoLwappApMemoryUsageHigh NOTIFICATION-TYPE This notification generates when an AP detects its memory usage is higher than the threshold configured in clsSysApMemoryUsageThreshold, with cLApAlarmSet set to true. When this AP's memory usage falls below the threshold lately, this notification is generated with cLApAlarmSet set to false. | 1.3.6.1.4.1.9.9.513.0.15 | current |
| ciscoLwappApMaxClientLimitNotify NOTIFICATION-TYPE This notification is generated when the event that max client limit reached is raised or cleared. | 1.3.6.1.4.1.9.9.513.0.16 | current |
| ciscoLwappApAdjChannelRogueDetected NOTIFICATION-TYPE This notification is generated whenever a rogue AP is detected at the Adjacent channels | 1.3.6.1.4.1.9.9.513.0.17 | current |
| ciscoLwappApAdjChannelRogueCleared NOTIFICATION-TYPE This notification is generated whenever a rogue AP is detected at the Adjacent channels and then subsequently if its been removed from the network. | 1.3.6.1.4.1.9.9.513.0.18 | current |
| ciscoLwappApRogueDetected NOTIFICATION-TYPE This notification is generated whenever a rogue AP is detected at the same channel. | 1.3.6.1.4.1.9.9.513.0.19 | current |
| ciscoLwappApCurrentChannelRogueDetected NOTIFICATION-TYPE This notification is generated whenever a rogue AP is detected at the Current channel. | 1.3.6.1.4.1.9.9.513.0.20 | current |
| ciscoLwappApCurrentChannelRogueCleared NOTIFICATION-TYPE This notification is generated whenever a rogue AP is detected at the Current channels and then subsequently if its been removed from the network. | 1.3.6.1.4.1.9.9.513.0.21 | current |
| ciscoLwappApMonitorModeChangeNotify NOTIFICATION-TYPE This notification is generated when the event that AP monitor mode changed. | 1.3.6.1.4.1.9.9.513.0.22 | current |
| ciscoLwappApAcTimeSyncFailureTrap NOTIFICATION-TYPE This notification is generated when the heartbeat between AP and Controller is lost or connection broken. | 1.3.6.1.4.1.9.9.513.0.23 | current |
| ciscoLwappApSsidKeyConflict NOTIFICATION-TYPE This notification is generated whenever 2 SSIDs on same AP have same cipher key. | 1.3.6.1.4.1.9.9.513.0.24 | current |
| ciscoLwappApCurrChannelChanged NOTIFICATION-TYPE This notification is generated when the channel is changed by automatic or customized. | 1.3.6.1.4.1.9.9.513.0.25 | current |
| ciscoLwappApCapwapRetransmissionQueueFullEvent NOTIFICATION-TYPE This notification is generated whenever capwap retransmission queue for an AP is filled. | 1.3.6.1.4.1.9.9.513.0.26 | current |
| ciscoLwappApSystemBootupEvent NOTIFICATION-TYPE This notification is generated whenever AP boots up. | 1.3.6.1.4.1.9.9.513.0.27 | current |
| ciscoLwappXmFilterCheckWarning NOTIFICATION-TYPE This notification is generated whenever co-existence filter is not present | 1.3.6.1.4.1.9.9.513.0.28 | current |
| ciscoLwappApModeUnsupportedOnFlexExpressEvent NOTIFICATION-TYPE This notification is generated whenever ap with unsupported mode joins flexexpress wlc or virtual wlc | 1.3.6.1.4.1.9.9.513.0.29 | current |
| ciscoLwappApXorRadioRoleChangeNotify NOTIFICATION-TYPE This notification is generated whenever XOR radio of AP has changed its Radio role | 1.3.6.1.4.1.9.9.513.0.30 | current |
| ciscoLwappRadioBandChangeNotify NOTIFICATION-TYPE This notification is generated whenever XOR radio of AP has changed its Band | 1.3.6.1.4.1.9.9.513.0.31 | current |
| ciscoLwappBrokenAntennaDetails NOTIFICATION-TYPE This notification is generated whenever this AP sends the antenna details, if any got broken or not | 1.3.6.1.4.1.9.9.513.0.33 | current |
| ciscoLwappApRadioStuck NOTIFICATION-TYPE This notification generates when an AP detects that its radio is stuck | 1.3.6.1.4.1.9.9.513.0.34 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoLwappApMIBCompliance MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.1 | deprecated |
| ciscoLwappApMIBComplianceRev1 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.2 | deprecated |
| ciscoLwappApMIBComplianceRev2 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.3 | deprecated |
| ciscoLwappApMIBComplianceRev3 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.4 | deprecated |
| ciscoLwappApMIBComplianceRev4 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.5 | deprecated |
| ciscoLwappApMIBComplianceRev5 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.6 | deprecated |
| ciscoLwappApMIBComplianceRev6 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.7 | deprecated |
| ciscoLwappApMIBComplianceRev7 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.8 | deprecated |
| ciscoLwappApMIBComplianceRev8 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.9 | deprecated |
| ciscoLwappApMIBComplianceRev9 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.10 | deprecated |
| ciscoLwappApMIBComplianceRev10 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.11 | deprecated |
| ciscoLwappApMIBComplianceRev11 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.12 | deprecated |
| ciscoLwappApMIBComplianceRev12 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.13 | deprecated |
| ciscoLwappApMIBComplianceRev13 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.14 | deprecated |
| ciscoLwappApMIBComplianceRev14 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappApMIB module. | 1.3.6.1.4.1.9.9.513.2.1.15 | current |
| ciscoLwappApGroup OBJECT-GROUP This collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.1 | current |
| ciscoLwappApIfGroup OBJECT-GROUP This collection of objects represents the information about the dot11 interfaces of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.2 | current |
| ciscoLwappApGroupSup1 OBJECT-GROUP This supplemental collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.3 | current |
| ciscoLwappApGroupSup2 OBJECT-GROUP This supplemental collection of objects represents the name associated with those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.4 | current |
| ciscoLwappApGroupSup3 OBJECT-GROUP This supplemental collection of objects represents the country and 802.11n related information for those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.5 | current |
| ciscoLwappApNotifObjsGroup OBJECT-GROUP This supplemental collection of objects represents the information carried by the AP related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.513.2.2.6 | current |
| ciscoLwappApNotifsGroup NOTIFICATION-GROUP This supplemental collection of objects represents the AP related notifications sent by the agent to a network management station. ciscoLwappApNotifsGroup object is superseded by ciscoLwappApNotifsGroupVer1. | 1.3.6.1.4.1.9.9.513.2.2.7 | deprecated |
| ciscoLwappApGroupSup4 OBJECT-GROUP This supplemental collection of objects represents the information for those APs that have joined the controller. ciscoLwappApGroupSup4 object is superseded by ciscoLwappApGroupSup6. | 1.3.6.1.4.1.9.9.513.2.2.8 | deprecated |
| ciscoLwappApEthernetIfGroup OBJECT-GROUP This collection of objects represents the information about the Ethernet interfaces of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.9 | current |
| ciscoLwappApRadioGroup OBJECT-GROUP This collection of objects represents the information about the Radios of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.10 | current |
| ciscoLwappApGroupSup5 OBJECT-GROUP This supplemental collection of objects represents objects related to encryption and link latency of AP. | 1.3.6.1.4.1.9.9.513.2.2.11 | current |
| ciscoLwappSeClientSup OBJECT-GROUP This supplemental collection of objects represents the Spectrum Expert client details connected to the APs. | 1.3.6.1.4.1.9.9.513.2.2.12 | current |
| ciscoLwappDot11IfAntennaGroup OBJECT-GROUP This supplemental collection of objects represents the antenna details corresponding to the dot11 interface of the Access Points. | 1.3.6.1.4.1.9.9.513.2.2.13 | current |
| ciscoLwappRetransmitGroup OBJECT-GROUP This supplemental collection of objects represents the retransmit parameters corresponding to the fallback of an AccessPoint to another controller during failover. | 1.3.6.1.4.1.9.9.513.2.2.14 | current |
| ciscoLwappApGroupSup6 OBJECT-GROUP This supplemental collection of objects represents the global and credential information for those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.15 | current |
| ciscoLwappApNotifsGroupVer1 NOTIFICATION-GROUP This supplemental collection of objects represents the AP related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.513.2.2.16 | current |
| ciscoLwappApGroupSup7 OBJECT-GROUP This supplemental collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.17 | current |
| ciscoLwappApGroupSup8 OBJECT-GROUP This supplemental collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.18 | current |
| ciscoLwappApNotifsGroupVer2 NOTIFICATION-GROUP This supplemental collection of objects represents the AP related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.513.2.2.19 | current |
| ciscoLwappApGroupSup9 OBJECT-GROUP This supplemental collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.20 | current |
| ciscoLwappApRadioGroupSup1 OBJECT-GROUP This collection of objects represents the information about the Radios of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.21 | current |
| ciscoLwappHaloBleGroup OBJECT-GROUP This collection contains BLE global configuration which lists the BLE beacon's identification number and attenuation value of HALO APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.22 | current |
| ciscoLwappApBleBeaconGroup OBJECT-GROUP This collection represents BLE beacon's AP specific configuration for HALO APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.23 | current |
| ciscoLwappApLanStatsGroup OBJECT-GROUP This collection represents Sardinia AP LAN stats information that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.24 | current |
| ciscoLwappApGroupSup10 OBJECT-GROUP This supplemental collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.25 | deprecated |
| ciscoLwappApXorRadioGroup OBJECT-GROUP This collection of objects represents the information about the Xor Radios of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.26 | deprecated |
| ciscoLwappApNotifsXorGroup NOTIFICATION-GROUP This collection of objects represents the XOR radio related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.513.2.2.27 | current |
| ciscoLwappApGroupSup11 OBJECT-GROUP This supplemental collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.28 | current |
| ciscoLwappApProfileHaloBleGroup OBJECT-GROUP This collection contains HALO BLE beacon configuration for a specific AP profile. It lists the HALO BLE beacon ID, UUID, transmission power, and status per beacon for HALO enabled APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.29 | current |
| ciscoLwappApProfileGroup OBJECT-GROUP This collection contains the information about the credentials of the 802.11 LWAPP Access Point that have joined the Controller | 1.3.6.1.4.1.9.9.513.2.2.30 | deprecated |
| ciscoLwappApPacketCaptureProfileGroup OBJECT-GROUP This collection contains the information about the packet capture parameters of the 802.11 LWAPP Access Point that have joined the Controller | 1.3.6.1.4.1.9.9.513.2.2.31 | current |
| ciscoLwappApPacketCaptureClientProfileGroup OBJECT-GROUP This collection contains the information about the packet capture parameters for per client basis for LWAPP Access Point that have joined the Controller | 1.3.6.1.4.1.9.9.513.2.2.32 | current |
| ciscoLwappApProfileGroupSup1 OBJECT-GROUP This collection contains the information about the credentials of the 802.11 LWAPP Access Point that have joined the Controller | 1.3.6.1.4.1.9.9.513.2.2.33 | deprecated |
| ciscoLwappApProfileQosMapGroup OBJECT-GROUP This collection contains Hotspot QoS Map configuration for a specific AP profile. It lists the QoS Map DSCP to UP mappings and mappings exceptions for Aps that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.34 | current |
| ciscoLwappApProfileGroupSup2 OBJECT-GROUP This collection contains the information about the credentials of the 802.11 LWAPP Access Point that have joined the Controller | 1.3.6.1.4.1.9.9.513.2.2.35 | current |
| ciscoLwappApGroupSup12 OBJECT-GROUP This supplemental collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.36 | deprecated |
| ciscoLwappApGroupSup13 OBJECT-GROUP This collection of objects represents the information about radio information of APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.37 | current |
| ciscoLwappApLanStatsGroupSup1 OBJECT-GROUP This collection represents Sardinia AP LAN stats information that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.38 | current |
| ciscoLwappApProfileGroupSup3 OBJECT-GROUP This collection contains the information about the credentials of the 802.11 LWAPP Access Point that have joined the Controller | 1.3.6.1.4.1.9.9.513.2.2.39 | deprecated |
| ciscoLwappApProfileHaloBleGroupSup1 OBJECT-GROUP This collection contains HALO BLE beacon configuration for a specific AP profile. It lists the HALO BLE beacon ID, UUID, transmission power, and status per beacon for HALO enabled APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.40 | current |
| ciscoLwappAp11axGroup OBJECT-GROUP This collection contains HALO BLE beacon configuration for a specific AP profile. It lists the HALO BLE beacon ID, UUID, transmission power, and status per beacon for HALO enabled APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.41 | current |
| ciscoLwappApXorRadioGroupSup1 OBJECT-GROUP This collection of objects represents the information about the Xor Radios of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.42 | deprecated |
| ciscoLwappApProfileGroupSup4 OBJECT-GROUP This collection contains the information about the credentials of the 802.11 LWAPP Access Point that have joined the Controller | 1.3.6.1.4.1.9.9.513.2.2.43 | current |
| ciscoLwappApGroupSup14 OBJECT-GROUP This supplemental collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.44 | current |
| ciscoLwappApXorRadioGroupSup2 OBJECT-GROUP This collection of objects represents the information about the Xor Radios of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.2.2.45 | current |