CISCO-LWAPP-RF-MIB
- Registered at
- 1.3.6.1.4.1.9.9.778
- Last updated
- 2020-10-07 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2020-10-06 00:00, 2020-06-03 00:00, 2018-11-15 00:00, 2017-07-07 00:00, 2012-04-27 00:00, 2012-01-27 00:00, 2011-11-01 00:00
- Namespace
- cisco
- Source file
CISCO-LWAPP-RF-MIB- Digest
sha256:58b7f3cd14dfc829a8f13d49c57f12b17506baf8e31c79a7db5a6e228bd8a9c3
Description
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. This MIB helps to manage the Radio Frequency (RF) parameters on the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected to. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the controllers. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. 802.1x The IEEE ratified standard for enforcing port based access control. This was originally intended for use on wired LANs and later extended for use in 802.11 WLAN environments. This defines an architecture with three main parts - a supplicant (Ex. an 802.11 wireless client), an authenticator (the AP) and an authentication server(a Radius server). The authenticator passes messages back and forth between the supplicant and the authentication server to enable the supplicant get authenticated to the network. Radio Frequency ( RF ) Radio frequency (RF) is a rate of oscillation in the range of about 3 kHz to 300 GHz, which corresponds to the frequency of radio waves, and the alternating currents which carry radio signals. Received Signal Strength Indicator ( RSSI ) A measure of the strength of the signal as observed by the entity that received it, expressed in 'dbm'. Coverage Hole Detection ( CHD ) If clients on an Access Point are detected at low RSSI levels, it is considered a coverage hole by the Access Points. This indicates the existence of an area where clients are continually getting poor signal coverage, without having a viable location to roam to. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol [3] IEEE 802.11 - The original 1 Mbit/s and 2 Mbit/s, 2.4 GHz RF and IR standard.
Contact
Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-LWAPP-TC-MIB | CLApIfType |
| CISCO-LWAPP-WLAN-MIB | cLAPGroupName |
| CISCO-SMI | ciscoMgmt |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-LWAPP-RF-MIB CISCO-LWAPP-TC-MIB CISCO-LWAPP-WLAN-MIB CISCO-SMI CISCO-TC INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CiscoLwappRFApDataRates TEXTUAL-CONVENTION This field indicates the data rates supported by an AP 'disabled' The rate is not supported by the AP 'supported' The rate is supported by the AP 'mandatoryRate' The rate is required by the AP 'notApplicable' The rate is notApplicable. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoLwappRFMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.778.0 | |||
| ciscoLwappRFMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.778.1 | |||
| ciscoLwappRFConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.778.1.1 | |||
| cLAPGroupsRFProfileTable OBJECT-TYPE This table lists the mapping between an RF profile and an AP group. | 1.3.6.1.4.1.9.9.778.1.1.1 | not-accessible | current | |
| cLAPGroupsRFProfileEntry OBJECT-TYPE An entry containing the configuration attributes that affect the operation of the APs within a group. Entries can be added/deleted by explicit management action from NMS/EMS through the 'bsnAPGroupsVlanRowStatus' object in bsnAPGroupsVlanTable as defined by the AIRESPACE-WIRELESS-MIB. | 1.3.6.1.4.1.9.9.778.1.1.1.1 | not-accessible | current | |
| cLAPGroups802dot11bgRFProfileName OBJECT-TYPE This object specifies the RF profile name assigned to this site on the 802.11bg radio. This profile being assigned should exist in the 'cLRFProfileTable'. To disassociate a profile with this site a string of zero length should be set. | 1.3.6.1.4.1.9.9.778.1.1.1.1.1 | SnmpAdminString (SIZE(0..64)) | read-write | current |
| cLAPGroups802dot11aRFProfileName OBJECT-TYPE This object specifies the RF profile name assigned to this site on the 802.11a radio. This profile being assigned should exist in the 'cLRFProfileTable'. To disassociate a profile with this site a string of zero length should be set. | 1.3.6.1.4.1.9.9.778.1.1.1.1.2 | SnmpAdminString (SIZE(0..64)) | read-write | current |
| cLRFProfileTable OBJECT-TYPE This table lists the configuration for each RF profile. | 1.3.6.1.4.1.9.9.778.1.1.2 | not-accessible | current | |
| cLRFProfileEntry OBJECT-TYPE An entry containing the configuration attributes that affect the operation of 802.11 RF domain. Entries can be added/deleted by explicit management action from NMS/EMS or through user console. | 1.3.6.1.4.1.9.9.778.1.1.2.1 | not-accessible | current | |
| cLRFProfileName OBJECT-TYPE This object uniquely identifies a RF Profile. | 1.3.6.1.4.1.9.9.778.1.1.2.1.1 | SnmpAdminString (SIZE(1..64)) | not-accessible | current |
| cLRFProfileDescr OBJECT-TYPE This object specifies a human-readable description of the profile. | 1.3.6.1.4.1.9.9.778.1.1.2.1.2 | SnmpAdminString (SIZE(0..64)) | read-create | current |
| cLRFProfileTransmitPowerMin OBJECT-TYPE This object specifies the lower bound of transmit power value supported by an AP. | 1.3.6.1.4.1.9.9.778.1.1.2.1.3 | Integer32 (-10..30) | read-create | current |
| cLRFProfileTransmitPowerMax OBJECT-TYPE This object specifies the uppoer bound of transmit power value supported by an AP. | 1.3.6.1.4.1.9.9.778.1.1.2.1.4 | Integer32 (-10..30) | read-create | current |
| cLRFProfileTransmitPowerThresholdV1 OBJECT-TYPE This object specifies the transmit power control version 1 threshold for the radio resource management algorithm. | 1.3.6.1.4.1.9.9.778.1.1.2.1.5 | Integer32 (-80..-50) | read-create | current |
| cLRFProfileTransmitPowerThresholdV2 OBJECT-TYPE This object specifies the transmit power control version 2 threshold for the radio resource management algorithm. | 1.3.6.1.4.1.9.9.778.1.1.2.1.6 | Integer32 (-80..-50) | read-create | current |
| cLRFProfileDataRate1Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.7 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate2Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.8 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate5AndHalfMbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.9 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate11Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.10 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate6Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.11 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate9Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.12 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate12Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.13 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate18Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.14 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate24Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.15 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate36Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.16 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate48Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.17 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileDataRate54Mbps OBJECT-TYPE This object specifies the configuration for this data rate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.18 | CiscoLwappRFApDataRates | read-create | current |
| cLRFProfileRadioType OBJECT-TYPE This object is used to configure the radio type for this profile. | 1.3.6.1.4.1.9.9.778.1.1.2.1.19 | CLApIfType | read-create | current |
| cLRFProfileStorageType OBJECT-TYPE This object represents the storage type for this conceptual row. | 1.3.6.1.4.1.9.9.778.1.1.2.1.20 | StorageType | read-create | current |
| cLRFProfileRowStatus OBJECT-TYPE This is the status column for this row and used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.778.1.1.2.1.21 | RowStatus | read-create | current |
| cLRFProfileHighDensityMaxRadioClients OBJECT-TYPE This object specifies the maximum number of clients per AP radio in high density environment. | 1.3.6.1.4.1.9.9.778.1.1.2.1.22 | Unsigned32 | read-create | current |
| cLRFProfileBandSelectProbeResponse OBJECT-TYPE This object specifies the AP's probe response with clients to verify whether client can associate on both 2.4 GHz and 5Ghz spectrum. When set to true, AP suppresses probe response to new clients for all SSIDs that are not being Band Select disabled. | 1.3.6.1.4.1.9.9.778.1.1.2.1.23 | TruthValue | read-create | current |
| cLRFProfileBandSelectCycleCount OBJECT-TYPE This object specifies number of times a client probe (2.4 G-Hz) is suppressed before the AP starts responding to the probes. | 1.3.6.1.4.1.9.9.778.1.1.2.1.24 | Unsigned32 | read-create | current |
| cLRFProfileBandSelectCycleThreshold OBJECT-TYPE This object specifies time threshold for a new scanning mobile station period. Mobile station cycle counter will increment only if mobile station scans same channel any time after threshold is passed. | 1.3.6.1.4.1.9.9.778.1.1.2.1.25 | Unsigned32 | read-create | current |
| cLRFProfileBandSelectExpireSuppression OBJECT-TYPE This object specifies the duration at which an AP waits to conduct another probe suppression. | 1.3.6.1.4.1.9.9.778.1.1.2.1.26 | Unsigned32 | read-create | current |
| cLRFProfileBandSelectExpireDualBand OBJECT-TYPE This object specifies the timeout duration until which an AP should not respond to 2.4ghz probe requests from a dual-band client. Once this band select duration expires the client will be marked as a non-dual band client and AP will start responding to the 2.4 Ghz probes. | 1.3.6.1.4.1.9.9.778.1.1.2.1.27 | Unsigned32 | read-create | current |
| cLRFProfileBandSelectClientRSSI OBJECT-TYPE This object specifies minimum mobile station RSSI threshold. Mobile stations having RSSI below this value will not be recorded in the suppressed table. This configuration filters out far away mobile stations with weaker signal strength. This will limit the number of mobile stations on the table to a reasonable amount. | 1.3.6.1.4.1.9.9.778.1.1.2.1.28 | Integer32 | read-create | current |
| cLRFProfileLoadBalancingWindowSize OBJECT-TYPE This object specifies the minimum number of clients to be associated on an AP in order to trigger load balancing. | 1.3.6.1.4.1.9.9.778.1.1.2.1.29 | Unsigned32 | read-create | current |
| cLRFProfileLoadBalancingMaxDenialCount OBJECT-TYPE This object specifies maximum number of association rejections sent by AP to a mobile station for a given sequence of association. When a mobile station tries to associate on wireless network, it sends association request to AP. If AP is overloaded and load balancing is enable on controller, AP will send a denial to association request. If there are no other AP in the vicinity of mobile station, it will try to associate same AP again. So to restrict the number of denial sent from AP, cldLoadBalancingMaxDenialCount is defined. After maximum denial count is reached mobile station will be able to associate. | 1.3.6.1.4.1.9.9.778.1.1.2.1.30 | Unsigned32 | read-create | current |
| cLRFProfileCHDDataRSSIThreshold OBJECT-TYPE This object specifies the RSSI value for non-voice clients i.e., clients sending only data traffic to trigger coverage event. | 1.3.6.1.4.1.9.9.778.1.1.2.1.31 | Integer32 | read-create | current |
| cLRFProfileCHDVoiceRSSIThreshold OBJECT-TYPE This object specifies the RSSI value for voice clients to trigger coverage event. | 1.3.6.1.4.1.9.9.778.1.1.2.1.32 | Integer32 | read-create | current |
| cLRFProfileCHDClientExceptionLevel OBJECT-TYPE This object specifies the minimum number of clients required to trigger coverage hole. | 1.3.6.1.4.1.9.9.778.1.1.2.1.33 | Unsigned32 | read-create | current |
| cLRFProfileCHDCoverageExceptionLevel OBJECT-TYPE This object specifies the minimum percentage of clients in the coverage hole region of the AP, required to trigger a coverage hole exception | 1.3.6.1.4.1.9.9.778.1.1.2.1.34 | Unsigned32 | read-create | current |
| cLRFProfileMulticastDataRate OBJECT-TYPE This object specifies the minimum data rate at which multicast clients can associate to AP. A value 0 indicates that AP will automatically adjust data rates. | 1.3.6.1.4.1.9.9.778.1.1.2.1.35 | Unsigned32 | read-create | current |
| cLRFProfile11nOnly OBJECT-TYPE This object specifies if 11n-client-only mode is enabled. A value of 'true' indicates 11n-client-only mode enabled. A value of 'false' indicates 11n-client-only mode disabled. | 1.3.6.1.4.1.9.9.778.1.1.2.1.36 | TruthValue | read-create | current |
| cLRFProfileHDClientTrapThreshold OBJECT-TYPE This object specifies the threshold number of clients per AP radio to trigger a trap. The trap ciscoLwappApClientThresholdNotify will be triggered once the count of clients on the AP radio reaches this limit. A value of zero indicates that the trap is disabled. | 1.3.6.1.4.1.9.9.778.1.1.2.1.37 | Unsigned32 | read-create | current |
| cLRFProfileInterferenceThreshold OBJECT-TYPE This object specifies interference threshold in % traps are generated when interference exceeds this value . | 1.3.6.1.4.1.9.9.778.1.1.2.1.38 | Unsigned32 (0..100) | read-create | current |
| cLRFProfileNoiseThreshold OBJECT-TYPE This object specifies the threshold number of noise threshold between -127 and 0 dBm. | 1.3.6.1.4.1.9.9.778.1.1.2.1.39 | Integer32 (-127..0) | read-create | current |
| cLRFProfileUtilizationThreshold OBJECT-TYPE This object specifies the threshold of bandwidth (%) being utilized by an access-point. Traps are sent when this value is exceeded | 1.3.6.1.4.1.9.9.778.1.1.2.1.40 | Unsigned32 (0..100) | read-create | current |
| cLRFProfileDCAForeignContribution OBJECT-TYPE This object specifies whether foreign interference is taken into account for the DCA metrics. A value of 'true' indicates that foreign interference is is considered when DCA metrics is derived. A value of 'false' indicates foreign interference is not taken into account when deriving the DCA metrics. | 1.3.6.1.4.1.9.9.778.1.1.2.1.41 | TruthValue | read-create | current |
| cLRFProfileDCAChannelWidth OBJECT-TYPE This object specifies how the system performs DCA channel width selection for the RFProfile twenty - 20MHz channel width supported by this radio. forty - 40MHz channel width supported by this radio. eighty - 80MHz channel width supported by this radio. onesixty - 160MHz channel width supported by this radio. best - Dynamic channel width(160MHz, 80MHz, 40MHz or 20MHz) supported by this radio. | 1.3.6.1.4.1.9.9.778.1.1.2.1.42 | INTEGER {twenty(1), forty(2), eighty(3), onesixty(4), best(5)} | read-create | current |
| cLRFProfileDCAChannelList OBJECT-TYPE This object specifies the 802.11 channels available to the RF Profile. A comma separated list of integers. | 1.3.6.1.4.1.9.9.778.1.1.2.1.43 | SnmpAdminString (SIZE(1..500)) | read-create | current |
| cLRFProfileRxSopThreshold OBJECT-TYPE This object specifies the receiver start of packet threshold for the rf profile. auto - Reverts radio receiver SOP to auto. high - Sets radio receiver SOP to high. low - Sets radio receiver SOP to low. medium - Sets radio receiver SOP to medium. custom - Sets radio receiver SOP to Custom value. | 1.3.6.1.4.1.9.9.778.1.1.2.1.44 | INTEGER {auto(0), low(1), medium(2), high(3), custom(4)} | read-create | current |
| cLRFProfileHSRMode OBJECT-TYPE This object specifies whether HSR mode for RF profile is enabled or not. A value of 'true' indicates that HSR is enabled. A value of 'false' indicates that HSR is disabled. | 1.3.6.1.4.1.9.9.778.1.1.2.1.45 | TruthValue | read-create | current |
| cLRFProfileHSRNeighborTimeoutFactor OBJECT-TYPE This object specifies the timeout interval of neighbors that will be configured for RF profile. Neighbor timeout factor will be five times the neighbor interval | 1.3.6.1.4.1.9.9.778.1.1.2.1.46 | Unsigned32 | read-create | current |
| cLRFProfileBandSelectClientMidRSSI OBJECT-TYPE This object specifies medium mobile station RSSI threshold. Mobile station between this value and cldBandSelectClientRssi will be recorded in suppressed table but will not be denied. The mobile station having RSSI stronger than this value will be recorded and denied. | 1.3.6.1.4.1.9.9.778.1.1.2.1.47 | Integer32 | read-create | current |
| cLRFProfileClientNetworkPreference OBJECT-TYPE This object represents the client network preference. default(0) - RRM Algorithm has no preference on the clients. connectivity(1) - RRM Algorithm has a preference on connectiviry of the clients. throughput(2) - RRM Algorithm has a preference on high thoughput of the clients. | 1.3.6.1.4.1.9.9.778.1.1.2.1.48 | INTEGER {default(0), connectivity(1), throughput(2)} | read-create | current |
| cLRFProfileUnusedChannelList OBJECT-TYPE This object specifies the 802.11 channels present in ths un-used channel list of RF Profile. A comma separated list of integers. | 1.3.6.1.4.1.9.9.778.1.1.2.1.49 | SnmpAdminString (SIZE(1..500)) | read-only | current |
| cLRFProfileShutdown OBJECT-TYPE This object specifies if rf profile is disabled. | 1.3.6.1.4.1.9.9.778.1.1.2.1.50 | TruthValue | read-write | current |
| cLRFProfileAirTimeFairnessMode OBJECT-TYPE This object specifies the mode of fairness for ATF supported APs, joined to the controller. disable(1) - This indicates that fairness mode is disabled. SSID Mode(2) - This indicates that fairness mode is SSID mode. Monitor Mode(3) - This indicates that fairness mode is monitor mode. | 1.3.6.1.4.1.9.9.778.1.1.2.1.51 | INTEGER {disable(1), ssid(2), monitor(3)} | read-write | current |
| cLRFProfileAirTimeFairnessOptimization OBJECT-TYPE This object specifies the optimization for ATF supported APs, joined to the controller to be configured. | 1.3.6.1.4.1.9.9.778.1.1.2.1.52 | INTEGER {disable(1), enable(2)} | read-write | current |
| cLRFProfileBridgeClientAccess OBJECT-TYPE This object specifies whether airtime allocation is enabled for the client access node. | 1.3.6.1.4.1.9.9.778.1.1.2.1.53 | TruthValue | read-write | current |
| cLRFProfileAirTimeAllocation OBJECT-TYPE This object specifies the percentage for airtime allocation for the client access node. | 1.3.6.1.4.1.9.9.778.1.1.2.1.54 | Unsigned32 (5..90) | read-write | current |
| cLRFProfileRxSopThresholdCustom OBJECT-TYPE This object specifies the percentage for the receiver start of packet custom threshold for the client access node. | 1.3.6.1.4.1.9.9.778.1.1.2.1.55 | Integer32 (-85..-60) | read-write | current |
| cLRFProfile11axObssPdEnable OBJECT-TYPE This object specifies whether 802.11ax OBSS PD spatial reuse is enabled for the RF profile. | 1.3.6.1.4.1.9.9.778.1.1.2.1.56 | TruthValue | read-write | current |
| cLRFProfile11axNonSrgObssPdMax OBJECT-TYPE This object specifies the non-SRG OBSS PD max threshold in dBm for the RF profile. | 1.3.6.1.4.1.9.9.778.1.1.2.1.57 | Integer32 (-82..-62) | read-write | current |
| cLRFProfileMcsDataRateTable OBJECT-TYPE This object specifies the 11n MCS rates supported by the RF profile, indexed by the MCS rate, ranging from 1 to 32, corresponding to rate MCS-0, MCS-1, ... MCS-31. | 1.3.6.1.4.1.9.9.778.1.1.3 | not-accessible | current | |
| cLRFProfileMcsDataRateEntry OBJECT-TYPE An entry containing MCS date rate information applicable to a particular profile. Entry is added to the table when the data rate is set to 'supported' or 'mandatory'. | 1.3.6.1.4.1.9.9.778.1.1.3.1 | not-accessible | current | |
| cLRFProfileMcsName OBJECT-TYPE This object uniquely identifies a RF Profile. | 1.3.6.1.4.1.9.9.778.1.1.3.1.1 | SnmpAdminString (SIZE(1..64)) | not-accessible | current |
| cLRFProfileMcsRate OBJECT-TYPE This object uniquely identifies the MCS data rate for a particular profile. | 1.3.6.1.4.1.9.9.778.1.1.3.1.2 | Unsigned32 | not-accessible | current |
| cLRFProfileMcsRateSupport OBJECT-TYPE This object is used to enable or disable the data rate. A value of 'true' indicates MCS support is enabled. A value of 'false' indicates MCS support is disabled. | 1.3.6.1.4.1.9.9.778.1.1.3.1.3 | TruthValue | read-write | current |
| cLRFProfileChannelListTable OBJECT-TYPE This object specifies the list of channels that is available for DCA of a RF profile. | 1.3.6.1.4.1.9.9.778.1.1.4 | not-accessible | current | |
| cLRFProfileChannelListEntry OBJECT-TYPE An entry containing Channel List information applicable to a particular profile. | 1.3.6.1.4.1.9.9.778.1.1.4.1 | not-accessible | current | |
| cLRFProfileChanNumber OBJECT-TYPE This object uniquely identifies the channel for a particular profile. | 1.3.6.1.4.1.9.9.778.1.1.4.1.1 | Unsigned32 | not-accessible | current |
| cLRFProfileChanAddRemove OBJECT-TYPE This object specifies a channel is to be added or removed from DCA list of the RFProfile. add - Add the channel to global DCA channel list. remove - Removed the channel from global DCA channel list. | 1.3.6.1.4.1.9.9.778.1.1.4.1.2 | INTEGER {add(1), remove(2)} | read-create | current |
| cLRFProfileChanRowStatus OBJECT-TYPE This is the status column for this row and used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.778.1.1.4.1.3 | RowStatus | read-create | current |
| cLRFProfileRemoveChannelTable OBJECT-TYPE This table represents the removed channel information from default DCA channel list for an AP's 802.11 interface using the RF profile. Based on the country that an AP operates in, it gets assigned to a regulatory domain. For a given regulatory domain a fixed number of channels are assigned automatically to an AP for a given interface. We can remove a channel from this default list and those channels will be put in this table. This table represents the removed DCA channels information. By default, there will not be any entries in this table. An entry can be created or deleted from this table using cLRFProfileRemoveChannelRowStatus. | 1.3.6.1.4.1.9.9.778.1.1.5 | not-accessible | current | |
| cLRFProfileRemoveChannelEntry OBJECT-TYPE Each entry in this table provides the removed channel information from the default DCA channel list for this RF profile | 1.3.6.1.4.1.9.9.778.1.1.5.1 | not-accessible | current | |
| cLRFProfileRemoveChannelName OBJECT-TYPE This object uniquely identifies a RF Profile. | 1.3.6.1.4.1.9.9.778.1.1.5.1.1 | SnmpAdminString (SIZE(1..64)) | not-accessible | current |
| cLRFProfileRemoveChannelNum OBJECT-TYPE The channel nubmer for this entry. This value represents the unique channel number removed from default DCA channel list for this RF profile. | 1.3.6.1.4.1.9.9.778.1.1.5.1.2 | Unsigned32 | not-accessible | current |
| cLRFProfileRemovedChannelDcaState OBJECT-TYPE This object specifies whether this channel is part of the dynamic channel allocation (DCA) Remove List. A value of 'false' indicates that the DCA for this channel is disabled. | 1.3.6.1.4.1.9.9.778.1.1.5.1.3 | TruthValue | read-create | current |
| cLRFProfileRemoveChannelRowStatus OBJECT-TYPE The status of this conceptual row. All writable objects in this row may be modified at any time. | 1.3.6.1.4.1.9.9.778.1.1.5.1.4 | RowStatus | read-create | current |
| cLRFProfileAddChannelTable OBJECT-TYPE This table represents the added channel information to the default DCA channel list in this RF profile. Based on the country that an AP operates in, it gets assigned to a regulatory domain. For a given regulatory domain a fixed number of channels are assigned automatically to an AP for a given interface. We can add a channel to this default list and those channels will be put in this table. This table represents the added channels information to the default DCA channel list. By default, there will not be any entries in this table. An entry can be created or deleted from this table using cLRFProfileAddChannelRowStatus. | 1.3.6.1.4.1.9.9.778.1.1.6 | not-accessible | current | |
| cLRFProfileAddChannelEntry OBJECT-TYPE Each entry in this table provides the added channel information to the default DCA channel list in this RF profile. | 1.3.6.1.4.1.9.9.778.1.1.6.1 | not-accessible | current | |
| cLRFProfileAddChannelName OBJECT-TYPE This object uniquely identifies a RF Profile. | 1.3.6.1.4.1.9.9.778.1.1.6.1.1 | SnmpAdminString (SIZE(1..64)) | not-accessible | current |
| cLRFProfileAddChannelNum OBJECT-TYPE The channel nubmer for this entry. This value represents the unique channel number added to the default DCA list in this RF profile. | 1.3.6.1.4.1.9.9.778.1.1.6.1.2 | Unsigned32 | not-accessible | current |
| cLRFProfileAddedChannelDcaState OBJECT-TYPE This object specifies whether this channel is part of the dynamic channel allocation (DCA) Add List. A value of 'true' indicates that the DCA for this channel is enabled. | 1.3.6.1.4.1.9.9.778.1.1.6.1.3 | TruthValue | read-create | current |
| cLRFProfileAddChannelRowStatus OBJECT-TYPE The status of this conceptual row. All writable objects in this row may be modified at any time. | 1.3.6.1.4.1.9.9.778.1.1.6.1.4 | RowStatus | read-create | current |
| ciscoLwappRFGlobalObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.778.1.2 | |||
| cLRFProfileOutOfBoxAPConfig OBJECT-TYPE This object specifies the out of box AP config feature. Enabling this feature will allow any AP that does not have group name configured upon join to controller then it will be considered as out of box AP and it will be moved to a special AP Group. Disabling this feature will only stop further subscription of new AP's to Out of Box AP group. A value of 'true' indicates that out of box AP feature is enabled and APs will be moved to newly created AP group out-of-box and shut of their radios. A value of 'false' indicates that out of box AP feature is disabled. | 1.3.6.1.4.1.9.9.778.1.2.1 | TruthValue | read-write | current |
| cLRFProfileOutOfBoxAPPersistenceConfig OBJECT-TYPE This object specifies the out of box AP group to be persistent or not. A value of 'true' indicates out-of-box persistence need to be enabled. A value of 'false' indicates out-of-box persistence need to be disabled. | 1.3.6.1.4.1.9.9.778.1.2.2 | TruthValue | read-write | current |
| ciscoLwappRFMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.778.2 | |||
| ciscoLwappRFMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.778.2.1 | |||
| ciscoLwappRFMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.778.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoLwappRFMIBCompliance MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappRFMIB module. This compliance is deprecated and replaced by ciscoLwappRFMIBComplianceVer1 . | 1.3.6.1.4.1.9.9.778.2.1.1 | deprecated |
| ciscoLwappRFMIBComplianceVer1 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappRFMIB module. | 1.3.6.1.4.1.9.9.778.2.1.2 | current |
| ciscoLwappRFMIBComplianceVer2 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappRFMIB module. Added ciscoLwappRFConfigGroup2 to add object to raise trap when client count exceeds threshold and ciscoLwappRFConfigGroup3 to address DCA settings | 1.3.6.1.4.1.9.9.778.2.1.3 | current |
| ciscoLwappRFMIBComplianceRev3 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappRFMIB module. | 1.3.6.1.4.1.9.9.778.2.1.4 | current |
| ciscoLwappRFMIBComplianceRev4 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappRFMIB module. | 1.3.6.1.4.1.9.9.778.2.1.5 | current |
| ciscoLwappRFMIBComplianceRev5 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappRFMIB module. | 1.3.6.1.4.1.9.9.778.2.1.6 | current |
| ciscoLwappRFConfigGroup OBJECT-GROUP This collection of objects specifies the configuration of RF parameters on the controller to be passed to an LWAPP AP.This config group ciscoLwappRFConfigGroup is deprecated and replaced by ciscoLwappRFConfigGroupVer1 | 1.3.6.1.4.1.9.9.778.2.2.1 | deprecated |
| ciscoLwappRFConfigGroupVer1 OBJECT-GROUP This collection of objects specifies the configuration of RF parameters on the controller to be passed to an LWAPP AP. | 1.3.6.1.4.1.9.9.778.2.2.2 | current |
| ciscoLwappRFConfigGroup1 OBJECT-GROUP This collection of objects specifies the configuration of RF parameters on the controller to be passed to an LWAPP AP. | 1.3.6.1.4.1.9.9.778.2.2.3 | current |
| ciscoLwappRFGlobalConfigGroup OBJECT-GROUP This is the RF global config parameter. | 1.3.6.1.4.1.9.9.778.2.2.4 | current |
| ciscoLwappRFGroupTrapThresholdConfig OBJECT-GROUP This object specifies the configuration of Trap threshold to be configured on the interface of an LWAPP AP. | 1.3.6.1.4.1.9.9.778.2.2.5 | current |
| ciscoLwappRFConfigGroup3 OBJECT-GROUP This object specifies the configuration DCA for RF Profiles. | 1.3.6.1.4.1.9.9.778.2.2.6 | current |
| ciscoLwappRFConfigGroup4 OBJECT-GROUP This object specifies the receiver start of packet threshold for RF Profiles. | 1.3.6.1.4.1.9.9.778.2.2.7 | current |
| ciscoLwappRFGroupDCAChannelConfig OBJECT-GROUP This object specifies the add and remove channels for RF Profiles. | 1.3.6.1.4.1.9.9.778.2.2.8 | deprecated |
| ciscoLwappRFGroupChannelConfig OBJECT-GROUP This object specifies the add and remove channels for RF Profiles. | 1.3.6.1.4.1.9.9.778.2.2.9 | current |
| ciscoLwappRFConfigGroupExtension1 OBJECT-GROUP This object specifies the configuration of RF parameters on the controller to be passed to an LWAPP AP. | 1.3.6.1.4.1.9.9.778.2.2.10 | current |
| ciscoLwappRFConfigGroup5 OBJECT-GROUP This object specifies the receiver start of packet threshold for RF Profiles. | 1.3.6.1.4.1.9.9.778.2.2.11 | current |
| ciscoLwappRFConfigGroup6 OBJECT-GROUP This collection of object specifies the configuration of AirTime Fairness parameters. | 1.3.6.1.4.1.9.9.778.2.2.12 | current |
| ciscoLwappRFConfigGroup7 OBJECT-GROUP This collection of object specifies the removed channel and add channel list information from default DCA channel list for a RF profile | 1.3.6.1.4.1.9.9.778.2.2.13 | current |
| ciscoLwappRFConfigGroup8 OBJECT-GROUP This collection of objects specifies the 802.11ax OBSS PD spatial reuse configurations for RF Profiles. | 1.3.6.1.4.1.9.9.778.2.2.14 | current |