CISCO-LWAPP-TUNNEL-MIB
- Registered at
- 1.3.6.1.4.1.9.9.848
- Last updated
- 2019-06-03 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2019-06-03 00:00, 2018-09-06 00:00, 2018-07-01 00:00, 2018-02-05 00:00, 2017-09-20 00:00, 2017-05-26 00:00
- Namespace
- cisco
- Source file
CISCO-LWAPP-TUNNEL-MIB- Digest
sha256:b8c6678d1299bf0222825d06b0ce7dd976fed3d0c21acdbe83b6cc42539c90bd
Description
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about local mobility anchor to which the controller has the joined. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + LMA + + LMA + + LMA + + LMA + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + WLC + + WLC + + WLC + + WLC + + WLC + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Gateway Service provider node which assigns IP and maintains the tunneled clients. Tunnel Connection from Wireless LAN controller to the Gateway. Tunnel establishment from WLC and TGW(Tunnel Gateway), in case of Flex-AP, tunnel establishment between AP and TGW. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.
Contact
Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-LWAPP-AP-MIB | cLApIfMacAddress |
| CISCO-LWAPP-WLAN-MIB | cLWlanIndex |
| CISCO-LWAPP-WLAN-POLICY-MIB | cLWlanWlanPolicyName |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | Unsigned64 |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-LWAPP-AP-MIB CISCO-LWAPP-DOT11-MIB CISCO-LWAPP-RF-MIB CISCO-LWAPP-TC-MIB CISCO-LWAPP-TUNNEL-MIB CISCO-LWAPP-WLAN-MIB CISCO-LWAPP-WLAN-POLICY-MIB CISCO-SMI CISCO-TC ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoLwappTunnelMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.0 | |||
| ciscoLwappTunnelMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.1 | |||
| cLWATunnelStatusChangeReasonCode OBJECT-TYPE This object represents tunnel status reason code down - Tunnel is down up - Tunnel is up progress - Client deletion for that tunnel in progress. | 1.3.6.1.4.1.9.9.848.1.1 | INTEGER {down(1), up(2), progress(3)} | accessible-for-notify | current |
| cLWATunnelGwIPType OBJECT-TYPE This object represents the IP address type of tunnel gateway IP. | 1.3.6.1.4.1.9.9.848.1.2 | InetAddressType | accessible-for-notify | current |
| cLWATunnelGwIP OBJECT-TYPE This object represents tunnel gateway IP. | 1.3.6.1.4.1.9.9.848.1.3 | InetAddress | accessible-for-notify | current |
| cLWATunnelGwName OBJECT-TYPE This object represents tunnel gateway name. | 1.3.6.1.4.1.9.9.848.1.4 | SnmpAdminString | accessible-for-notify | current |
| cLWATunnelType OBJECT-TYPE This object represents tunnel type. none - unknown tunnel. pmipv6 - pmipv6 tunnel type . gtpv2 - gtpv2 tunnel type . eogre - eogre tunnel type. | 1.3.6.1.4.1.9.9.848.1.5 | INTEGER {none(1), pmipv6(2), gtpv2(3), eogre(4)} | accessible-for-notify | current |
| cLWATunnelDomainName OBJECT-TYPE This object represents tunnel domain name. | 1.3.6.1.4.1.9.9.848.1.6 | SnmpAdminString | accessible-for-notify | current |
| cLWATunnelActiveGwIPType OBJECT-TYPE This object represents the IP address type of the active tunnel gateway IP in domain. | 1.3.6.1.4.1.9.9.848.1.7 | InetAddressType | accessible-for-notify | current |
| cLWATunnelActiveGwIP OBJECT-TYPE This object represents active gateway IP in domain. | 1.3.6.1.4.1.9.9.848.1.8 | InetAddress | accessible-for-notify | current |
| cLWATunnelActiveGwName OBJECT-TYPE This object represents active gateway name in domain. | 1.3.6.1.4.1.9.9.848.1.9 | SnmpAdminString | accessible-for-notify | current |
| cLWATunnelProfileName OBJECT-TYPE This object represents tunnel profile name. | 1.3.6.1.4.1.9.9.848.1.10 | SnmpAdminString | accessible-for-notify | current |
| cLWATunnelRealm OBJECT-TYPE This object represents realm of the user. eg. In airtel@a.com username, a.com is realm of the user | 1.3.6.1.4.1.9.9.848.1.11 | SnmpAdminString | accessible-for-notify | current |
| cLWATunnelVlanId OBJECT-TYPE This object represents tunnel vlan Id. | 1.3.6.1.4.1.9.9.848.1.12 | Unsigned32 | accessible-for-notify | current |
| cLWATunnelClientMacAddress OBJECT-TYPE This object represents the MAC address of the client for this entry. | 1.3.6.1.4.1.9.9.848.1.13 | MacAddress | accessible-for-notify | current |
| cLWATunnelClientTypeChangeReasonCode OBJECT-TYPE This object represents client type change from simple to EoGRE. staticProfile - This indicates WLAN static profile is applied. AAAOveride - This indicates that AAA override parameters are applied. dot1xAuthentication - This indicates that dot1x authentication is completed. mobilityHandoff - This indicates that mobility handoff has happened. | 1.3.6.1.4.1.9.9.848.1.14 | INTEGER {staticProfile(1), aaaOveride(2), dot1xAuthentication(3), mobilityHandoff(4)} | accessible-for-notify | current |
| ciscoLwappTunnelMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.2 | |||
| ciscoLwappTunnelMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.2.1 | |||
| ciscoLwappTunnelMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.2.2 | |||
| ciscoLwappGatewayTunnel OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.3 | |||
| clGatewayTunnelTable OBJECT-TYPE This table contains the list of tunnel gateways configured on WLC. | 1.3.6.1.4.1.9.9.848.3.1 | not-accessible | current | |
| clGatewayTunnelEntry OBJECT-TYPE Each entry represents a conceptual row in this table. For each tunnel created to the gateway, there will be a row. | 1.3.6.1.4.1.9.9.848.3.1.1 | not-accessible | current | |
| clGatewayTunnelName OBJECT-TYPE This object represents the name of tunnel gateway. | 1.3.6.1.4.1.9.9.848.3.1.1.1 | OCTET STRING (SIZE(1..128)) | not-accessible | current |
| clGatewayTunnelType OBJECT-TYPE This object represents the type of the tunnel gateway. none - The tunnel is of type unknown. pmipv6 - The tunnel is of type PMIPV6. gtpv2 - The tunnel is of type GTPV2. eogre - The tunnel is of type EoGRE. | 1.3.6.1.4.1.9.9.848.3.1.1.2 | INTEGER {none(1), pmipv6(2), gtpv2(3), eogre(4)} | not-accessible | current |
| clGatewayTunnelAddressType OBJECT-TYPE This object specifies the IP address type for tunnel. | 1.3.6.1.4.1.9.9.848.3.1.1.3 | InetAddressType | read-create | current |
| clGatewayTunnelAddress OBJECT-TYPE This object specifies the IP address of the tunnel gateway. | 1.3.6.1.4.1.9.9.848.3.1.1.4 | InetAddress | read-create | current |
| clGatewayTunnelStatus OBJECT-TYPE This object specifies the tunnel status. A value of 'true' indicates that the tunnel is up. A value of 'false' indicates that the tunnel is down. | 1.3.6.1.4.1.9.9.848.3.1.1.5 | TruthValue | read-only | current |
| clGatewayTunnelRowStatus OBJECT-TYPE This is the status column for this row and is used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.848.3.1.1.6 | RowStatus | read-create | current |
| clGatewayTunnelAdminStatus OBJECT-TYPE This object represents whether the tunnel is enabled to pass WLAN traffic or not. The traffic can reach gateway based on the reachability of gateway. A value of 'true' indicates that the tunnel mapped to WLAN via the profile can pass WLAN traffic. A value of 'false' indicates that the tunnel mapped to WLAN via the profile cannot pass WLAN traffic. | 1.3.6.1.4.1.9.9.848.3.1.1.7 | TruthValue | read-only | current |
| clGatewayTunnelMtu OBJECT-TYPE This object represents the MTU of the tunnel between WLC and gateway. | 1.3.6.1.4.1.9.9.848.3.1.1.8 | Unsigned32 | read-only | current |
| clGatewayTunnelFlapCount OBJECT-TYPE This object represents the number of times the tunnel between WLC and gateway is flapped. | 1.3.6.1.4.1.9.9.848.3.1.1.9 | Unsigned32 | read-only | current |
| cLGatewayTunnelSourceInterface OBJECT-TYPE This object specifies the source interface to tunnel. If not set value of cLGatewayInterface will be used. | 1.3.6.1.4.1.9.9.848.3.1.1.10 | SnmpAdminString | read-create | current |
| clGatewayDomainTable OBJECT-TYPE This table contains the list of domains created, each domain contains maximum of two gateways. At any given time only one gateway is active in a domain. | 1.3.6.1.4.1.9.9.848.3.2 | not-accessible | current | |
| clGatewayDomainEntry OBJECT-TYPE This object represents an entry of domain configuration details. | 1.3.6.1.4.1.9.9.848.3.2.1 | not-accessible | current | |
| clGatewayDomainName OBJECT-TYPE This object represents name of the domain. | 1.3.6.1.4.1.9.9.848.3.2.1.1 | OCTET STRING (SIZE(1..128)) | not-accessible | current |
| clGatewayDomainTunnelType OBJECT-TYPE This object represents type of the gateway tunnel that domain contains. none - The tunnel is of type unknown. pmipv6 - The tunnel is of type PMIPV6. gtpv2 - The tunnel is of type GTPV2. eogre - The tunnel is of type EoGRE. | 1.3.6.1.4.1.9.9.848.3.2.1.2 | INTEGER {none(1), pmipv6(2), gtpv2(3), eogre(4)} | not-accessible | current |
| clGatewayDomainActiveGateway OBJECT-TYPE This object represents name of the active gateway in the domain. | 1.3.6.1.4.1.9.9.848.3.2.1.3 | OCTET STRING | read-only | current |
| clGatewayDomainPrimaryGateway OBJECT-TYPE This object specifies the primary gateway of the domain. | 1.3.6.1.4.1.9.9.848.3.2.1.4 | OCTET STRING (SIZE(0..128)) | read-create | current |
| clGatewayDomainSecondaryGateway OBJECT-TYPE This object represents the secondary gateway of the domain. | 1.3.6.1.4.1.9.9.848.3.2.1.5 | OCTET STRING (SIZE(0..128)) | read-create | current |
| clGatewayDomainRowStatus OBJECT-TYPE This is the status column for this row and is used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.848.3.2.1.6 | RowStatus | read-create | current |
| clGatewayDomainAdminStatus OBJECT-TYPE This is the admin status of tunnel domain. | 1.3.6.1.4.1.9.9.848.3.2.1.7 | INTEGER {up(1), down(2)} | read-create | current |
| clGatewayDomainRedundancyModel OBJECT-TYPE This is the tunnel redundancy mode for this domain. nonrevertive - Active tunnel will not switch back on primary tunnel until next tunnel switchover. revertive - Active tunnel will switch back on primary tunnel as soon as it comes up again. | 1.3.6.1.4.1.9.9.848.3.2.1.8 | INTEGER {nonrevertive(0), revertive(1)} | read-create | current |
| clGatewayDomainGatewayListTable OBJECT-TYPE This table contains the list of gateways attached to the domain. At maximum there will be 2 gateways in domain. | 1.3.6.1.4.1.9.9.848.3.3 | not-accessible | current | |
| clGatewayDomainGatewayListEntry OBJECT-TYPE Each entry represents a conceptual row in this table. For each gateway added to the domain will be a row. | 1.3.6.1.4.1.9.9.848.3.3.1 | not-accessible | current | |
| clGatewayDomainGatewayListRowStatus OBJECT-TYPE This is the status column for this row and is used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.848.3.3.1.1 | RowStatus | read-create | current |
| clGatewayProfileTable OBJECT-TYPE This table contains the list of profiles created. Rules are attached to the profile. Maximum rules attached to per profile is 32. | 1.3.6.1.4.1.9.9.848.3.4 | not-accessible | current | |
| clGatewayProfileEntry OBJECT-TYPE Each entry represents a conceptual row in this table. For each profile there will be a row. | 1.3.6.1.4.1.9.9.848.3.4.1 | not-accessible | current | |
| clGatewayProfileName OBJECT-TYPE This object represents name of the gateway profile. | 1.3.6.1.4.1.9.9.848.3.4.1.1 | OCTET STRING (SIZE(1..128)) | not-accessible | current |
| clGatewayProfileDhcpOpt82Status OBJECT-TYPE This object specifies status of DHCP option 82 of the profile. A value of 'true' indicates that DHCP option 82 is enabled. A value of 'false' indicates that DHCP option 82 is disabled. | 1.3.6.1.4.1.9.9.848.3.4.1.2 | TruthValue | read-create | current |
| clGatewayProfileDhcpOpt82Format OBJECT-TYPE This object specifies binary or ASCII format of the DHCP data. | 1.3.6.1.4.1.9.9.848.3.4.1.3 | Unsigned32 | read-create | current |
| clGatewayProfileDhcpOpt82Delimiter OBJECT-TYPE This object specifies delimiter between the attributes of DHCP option. | 1.3.6.1.4.1.9.9.848.3.4.1.4 | OCTET STRING | read-create | current |
| clGatewayProfileCircuitId OBJECT-TYPE This object specifies of circuit-id attributes per profile. Maximum circuit-id per profile supported is 5. | 1.3.6.1.4.1.9.9.848.3.4.1.5 | OCTET STRING | read-create | current |
| clGatewayProfileRemoteId OBJECT-TYPE This object specifies of remote-id attributes per profile. Maximum remote-id per profile supported is 5. | 1.3.6.1.4.1.9.9.848.3.4.1.6 | OCTET STRING | read-create | current |
| clGatewayProfileRadiusProxyStatus OBJECT-TYPE This object specifies status of gateway radius proxy of the profile. A value of 'true' indicates that radius proxy is enabled. A value of 'false' indicates that radius proxy is disabled. | 1.3.6.1.4.1.9.9.848.3.4.1.7 | TruthValue | read-create | current |
| clGatewayProfileRadiusProxyAccounting OBJECT-TYPE This object specifies status of gateway radius proxy accounting of the profile. A value of 'true' indicates that accounting is enabled on radius proxy. A value of 'false' indicates that accounting is disabled on radius proxy. | 1.3.6.1.4.1.9.9.848.3.4.1.8 | TruthValue | read-create | current |
| clGatewayProfileRowStatus OBJECT-TYPE This is the status column for this row and is used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.848.3.4.1.9 | RowStatus | read-create | current |
| clGatewayProfileAdminStatus OBJECT-TYPE This is the admin status of tunnel profile. | 1.3.6.1.4.1.9.9.848.3.4.1.10 | INTEGER {up(1), down(2)} | read-create | current |
| clGatewayProfileAAAOverride OBJECT-TYPE This object specifies the status of AAA-override. A value of 'true' indicates that AAA-override is enabled. A value of 'false' indicates that AAA-override is disabled. | 1.3.6.1.4.1.9.9.848.3.4.1.11 | TruthValue | read-create | current |
| clGatewayRuleTable OBJECT-TYPE This table contains the list of rules created. Rules are attached to the profile. | 1.3.6.1.4.1.9.9.848.3.5 | not-accessible | current | |
| clGatewayRuleEntry OBJECT-TYPE Each entry represents a conceptual row in this table. For each rule a row will be created. | 1.3.6.1.4.1.9.9.848.3.5.1 | not-accessible | current | |
| clGatewayRuleName OBJECT-TYPE This object represents name of the gateway rule, which is applied to profile. | 1.3.6.1.4.1.9.9.848.3.5.1.1 | OCTET STRING (SIZE(1..128)) | not-accessible | current |
| clGatewayRuleTunnelType OBJECT-TYPE This object specifies type of the gateway tunnel. none - The tunnel is of type unknown. pmipv6 - The tunnel is of type PMIPV6. gtpv2 - The tunnel is of type GTPV2. eogre - The tunnel is of type EoGRE. | 1.3.6.1.4.1.9.9.848.3.5.1.2 | INTEGER {none(1), pmipv6(2), gtpv2(3), eogre(4)} | read-create | current |
| clGatewayRuleVlanId OBJECT-TYPE This object specifies vlan attached to rule. | 1.3.6.1.4.1.9.9.848.3.5.1.3 | Unsigned32 | read-create | current |
| clGatewayRuleDomainName OBJECT-TYPE This object specifies domain attached to the rule. | 1.3.6.1.4.1.9.9.848.3.5.1.4 | OCTET STRING | read-create | current |
| clGatewayRuleRowStatus OBJECT-TYPE This is the status column for this row and is used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.848.3.5.1.5 | RowStatus | read-create | current |
| clGatewayRuleRealm OBJECT-TYPE This objects represents the pattern used to match client reams, in order to classify them. | 1.3.6.1.4.1.9.9.848.3.5.1.6 | SnmpAdminString | read-create | current |
| clApGatewayTunnelTable OBJECT-TYPE This table contains the list of tunnel gateways on flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.6 | not-accessible | current | |
| clApGatewayTunnelEntry OBJECT-TYPE Each entry represents a conceptual row in this table. For each tunnel created to the gateway per flexconnect AP, there will be a row. | 1.3.6.1.4.1.9.9.848.3.6.1 | not-accessible | current | |
| clApGatewayTunnelStatus OBJECT-TYPE This object represents the tunnel status of the flexconnect AP. A value of 'true' indicates that tunnel is enabled. A value of 'false' indicates that tunnel is disabled. | 1.3.6.1.4.1.9.9.848.3.6.1.1 | TruthValue | read-only | current |
| clApGatewayTunnelClientCount OBJECT-TYPE This object represents the total client count per gateway in flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.6.1.2 | Unsigned32 | read-only | current |
| clApGatewayTunnelMtu OBJECT-TYPE This object represents the MTU of the gateway in flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.6.1.3 | Unsigned32 | read-only | current |
| clApGatewayTunnelFlapCount OBJECT-TYPE This object represents the number of time the gateway tunnel is flapped in flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.6.1.4 | Unsigned32 | read-only | current |
| clApGatewayDomainTable OBJECT-TYPE This table contains the list of domains created on AP which contains gateways. Maximum gateways in domain is 2. At anytime only one gateway is active in the domain. | 1.3.6.1.4.1.9.9.848.3.7 | not-accessible | current | |
| clApGatewayDomainEntry OBJECT-TYPE Each entry represents a conceptual row in this table. For each domain created will be a row. | 1.3.6.1.4.1.9.9.848.3.7.1 | not-accessible | current | |
| clApGatewayDomainActiveGateway OBJECT-TYPE This object represents name of the active gateway in the domain. | 1.3.6.1.4.1.9.9.848.3.7.1.1 | OCTET STRING | read-only | current |
| clGatewayTunnelStatsTable OBJECT-TYPE This table contains the list of tunnel gateways statistics. Statistics include per gateway informations like gateway up time, gateway heartbeat information and total number of clients connected to the gateway. | 1.3.6.1.4.1.9.9.848.3.8 | not-accessible | current | |
| clGatewayTunnelStatsEntry OBJECT-TYPE Each entry represents a conceptual row in this table. For each tunnel created to the gateway, there will be a row. | 1.3.6.1.4.1.9.9.848.3.8.1 | not-accessible | current | |
| clGatewayTunnelStatsClientCount OBJECT-TYPE This object represents total number of clients connected to the gateway tunnel. | 1.3.6.1.4.1.9.9.848.3.8.1.1 | Unsigned32 | read-only | current |
| clGatewayTunnelStatsTunnelUpTime OBJECT-TYPE This object represents up time of gateway in seconds. | 1.3.6.1.4.1.9.9.848.3.8.1.2 | Unsigned32 | read-only | current |
| clGatewayTunnelStatsKeepaliveLoss OBJECT-TYPE This object represents the number of keep alive message lost per gateway. | 1.3.6.1.4.1.9.9.848.3.8.1.3 | Unsigned32 | read-only | current |
| clGatewayTunnelStatsTunnelRxBytes OBJECT-TYPE This object represents the total number of bytes received per gateway. | 1.3.6.1.4.1.9.9.848.3.8.1.4 | Unsigned64 | read-only | current |
| clGatewayTunnelStatsTunnelTxBytes OBJECT-TYPE This object represents the total number of bytes transmitted per gateway. | 1.3.6.1.4.1.9.9.848.3.8.1.5 | Unsigned64 | read-only | current |
| clGatewayTunnelStatsTunnelRxPkts OBJECT-TYPE This object represents the total number of packets received per gateway. | 1.3.6.1.4.1.9.9.848.3.8.1.6 | Unsigned64 | read-only | current |
| clGatewayTunnelStatsTunnelTxPkts OBJECT-TYPE This object represents the total number of packets transmitted per gateway. | 1.3.6.1.4.1.9.9.848.3.8.1.7 | Unsigned64 | read-only | current |
| clApGatewayTunnelStatsTable OBJECT-TYPE This table contains the list of AP tunnel gateways statistics. | 1.3.6.1.4.1.9.9.848.3.9 | not-accessible | current | |
| clApGatewayTunnelStatsEntry OBJECT-TYPE Each entry represents a conceptual row in this table. For each tunnel created to the gateway, there will be a row. | 1.3.6.1.4.1.9.9.848.3.9.1 | not-accessible | current | |
| clApGatewayTunnelStatsTunnelUpTime OBJECT-TYPE This object represents up time of gateway in seconds of flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.9.1.1 | Unsigned32 | read-only | current |
| clApGatewayTunnelStatsKeepaliveLoss OBJECT-TYPE This object represents the number of keep alive message lost per gateway in flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.9.1.2 | Unsigned32 | read-only | current |
| clApGatewayTunnelStatsTunnelRxBytes OBJECT-TYPE This object represents the total number of bytes received per gateway in flexconnect AP. clApGatewayTunnelStatsTunnelRxBytes object is superseded by clApGatewayTunnelStatsTunnelRxBytes64. | 1.3.6.1.4.1.9.9.848.3.9.1.3 | Unsigned32 | read-only | deprecated |
| clApGatewayTunnelStatsTunnelTxBytes OBJECT-TYPE This object represents the total number of bytes transmitted per gateway in flexconnect AP. clApGatewayTunnelStatsTunnelTxBytes object is superseded by clApGatewayTunnelStatsTunnelTxBytes64. | 1.3.6.1.4.1.9.9.848.3.9.1.4 | Unsigned32 | read-only | deprecated |
| clApGatewayTunnelStatsTunnelRxPkts OBJECT-TYPE This object represents the total number of packets received per gateway in flexconnect AP. clApGatewayTunnelStatsTunnelRxPkts object is superseded by clApGatewayTunnelStatsTunnelRxPkts64. | 1.3.6.1.4.1.9.9.848.3.9.1.5 | Unsigned32 | read-only | deprecated |
| clApGatewayTunnelStatsTunnelTxPkts OBJECT-TYPE This object represents the total number of packets transmitted per gateway in flexconnect AP. clApGatewayTunnelStatsTunnelTxPkts object is superseded by clApGatewayTunnelStatsTunnelTxPkts64. | 1.3.6.1.4.1.9.9.848.3.9.1.6 | Unsigned32 | read-only | deprecated |
| clApGatewayTunnelStatsTunnelRxBytes64 OBJECT-TYPE This object represents the total number of bytes received per gateway in flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.9.1.7 | Unsigned64 | read-only | current |
| clApGatewayTunnelStatsTunnelTxBytes64 OBJECT-TYPE This object represents the total number of bytes transmitted per gateway in flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.9.1.8 | Unsigned64 | read-only | current |
| clApGatewayTunnelStatsTunnelRxPkts64 OBJECT-TYPE This object represents the total number of packets received per gateway in flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.9.1.9 | Unsigned64 | read-only | current |
| clApGatewayTunnelStatsTunnelTxPkts64 OBJECT-TYPE This object represents the total number of packets transmitted per gateway in flexconnect AP. | 1.3.6.1.4.1.9.9.848.3.9.1.10 | Unsigned64 | read-only | current |
| clGatewayGlobalInterface OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.4 | |||
| cLGatewayInterface OBJECT-TYPE This object specifies the source interface to tunnel. | 1.3.6.1.4.1.9.9.848.4.1 | OCTET STRING | read-write | current |
| clGatewayGlobalHeartbeatInterval OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.5 | |||
| cLGatewayHeartbeatInterval OBJECT-TYPE This object specifies the time interval to send echo message. | 1.3.6.1.4.1.9.9.848.5.1 | Unsigned32 | read-write | current |
| clGatewayGlobalHeartbeatMaxSkipCount OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.6 | |||
| cLGatewayHeartbeatMaxSkipCount OBJECT-TYPE This object specifies the maximum skip count to send echo message. | 1.3.6.1.4.1.9.9.848.6.1 | Unsigned32 | read-write | current |
| clGatewayWlanConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.7 | |||
| cLGatewayWlanConfigTable OBJECT-TYPE This table represents the information about Gateway related config on a WLAN. | 1.3.6.1.4.1.9.9.848.7.1 | not-accessible | current | |
| cLGatewayWlanConfigEntry OBJECT-TYPE Each entry in this table represents the configuration attributes of Gateway on a WLAN. | 1.3.6.1.4.1.9.9.848.7.1.1 | not-accessible | current | |
| cLGatewayWlanVlanOverrideEnable OBJECT-TYPE This object specifies the EoGRE Vlan Override status of a WLAN. A value of 'true' indicates that EoGRE Vlan Override is enabled on a WLAN. A value of 'false' indicates that EoGRE Vlan Override is disabled on a WLAN. | 1.3.6.1.4.1.9.9.848.7.1.1.1 | TruthValue | read-write | current |
| cLGatewayWlanVlanId OBJECT-TYPE This object specifies the Vlan ID of the Vlan in which client traffic needs to be carried. | 1.3.6.1.4.1.9.9.848.7.1.1.2 | Unsigned32 | read-write | current |
| clGatewayWlanProfileConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.8 | |||
| cLGatewayWlanProfileConfigTable OBJECT-TYPE This table represents the information about Gateway Tunnel profile mapping config on a WLAN policy profile. A row will exist in this table for each WLAN policy profile that has a tunnel profile configured | 1.3.6.1.4.1.9.9.848.8.1 | not-accessible | current | |
| cLGatewayWlanProfileConfigEntry OBJECT-TYPE Each entry in this table represents the configuration attributes of Gateway Tunnel Profile on a WLAN policy profile. | 1.3.6.1.4.1.9.9.848.8.1.1 | not-accessible | current | |
| cLGatewayWlanProfileTunnelProfile OBJECT-TYPE This object specifies the Tunnel Profile to enable on the WLAN policy profile. | 1.3.6.1.4.1.9.9.848.8.1.1.1 | OCTET STRING | read-write | current |
| clGatewayAAAProxyConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.848.9 | |||
| cLGatewayAAAProxyConfigTable OBJECT-TYPE This table represents the configuration details for AAA proxy server on Tunnel Gateway. A row will exist in this table for each Tunnel Gateway that behaves as AAA proxy. | 1.3.6.1.4.1.9.9.848.9.1 | not-accessible | current | |
| cLGatewayAAAProxyConfigEntry OBJECT-TYPE Each entry in this table represents the configuration attributes of Tunnel Gateway AAA Proxy. | 1.3.6.1.4.1.9.9.848.9.1.1 | not-accessible | current | |
| cLGatewayAAAProxyKey OBJECT-TYPE This object specifies the AAA Key for the server on the Tunnel Gateway. | 1.3.6.1.4.1.9.9.848.9.1.1.1 | SnmpAdminString | read-write | current |
| cLGatewayAAAProxyRowStatus OBJECT-TYPE This is the status column for this row and is used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.848.9.1.1.2 | RowStatus | read-create | current |
| cLGatewayAAAProxyKeyType OBJECT-TYPE This object specifies the AAA Key Type for the server on the Tunnel Gateway. | 1.3.6.1.4.1.9.9.848.9.1.1.3 | INTEGER {clear(1), aes(2)} | read-write | current |
| cLGatewayAAAProxyPort OBJECT-TYPE This object specifies the TCP/UDP port number for the AAA server on the Tunnel Gateway. | 1.3.6.1.4.1.9.9.848.9.1.1.4 | Unsigned32 (0..65535) | read-write | current |
Notifications
| Name | OID | Status |
|---|---|---|
| cLWATunnelStatusChange NOTIFICATION-TYPE This notification is sent when Tunnel status Changes. | 1.3.6.1.4.1.9.9.848.0.1 | current |
| cLWATunnelDomainStatusChange NOTIFICATION-TYPE This notification is sent when Active Gateway is changed in a Domain. | 1.3.6.1.4.1.9.9.848.0.2 | current |
| cLWATunnelClientTypeChange NOTIFICATION-TYPE This notification is sent when client type is marked as eogre tunnel user. | 1.3.6.1.4.1.9.9.848.0.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoLwappTunnelMIBCompliance MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappTunnelMIB module. | 1.3.6.1.4.1.9.9.848.2.1.1 | deprecated |
| ciscoLwappTunnelMIBComplianceRev1 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappTunnelMIB module. | 1.3.6.1.4.1.9.9.848.2.1.2 | deprecated |
| ciscoLwappTunnelMIBComplianceRev2 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappTunnelMIB module. | 1.3.6.1.4.1.9.9.848.2.1.3 | deprecated |
| ciscoLwappTunnelMIBComplianceRev3 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappTunnelMIB module. | 1.3.6.1.4.1.9.9.848.2.1.4 | deprecated |
| ciscoLwappTunnelMIBComplianceRev4 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappTunnelMIB module. | 1.3.6.1.4.1.9.9.848.2.1.5 | deprecated |
| ciscoLwappTunnelMIBComplianceRev5 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappTunnelMIB module. | 1.3.6.1.4.1.9.9.848.2.1.6 | current |
| cLTunnelConfigGroup OBJECT-GROUP This is a collection of objects which can be configured to control Tunnel parameters. | 1.3.6.1.4.1.9.9.848.2.2.1 | current |
| cLTunnelNotificationObjectsGroup OBJECT-GROUP This is a collection of notifications about the Tunnels behavior on controller | 1.3.6.1.4.1.9.9.848.2.2.2 | current |
| cLTunnelNotificationGroup NOTIFICATION-GROUP This is a collection of notifications groups thats about tunnels behaviors on controller | 1.3.6.1.4.1.9.9.848.2.2.3 | current |
| cLTunnelConfigGroupRev1 OBJECT-GROUP This is a collection of objects which can be configured to control Tunnel parameters. | 1.3.6.1.4.1.9.9.848.2.2.4 | current |
| clGatewayWlanConfigGroup OBJECT-GROUP This is a collection of objects which can be configured to control WLAN parameters of a gateway. | 1.3.6.1.4.1.9.9.848.2.2.5 | current |
| cLTunnelConfigGroupRev2 OBJECT-GROUP This is a collection of objects which can be configured to control Tunnel parameters. | 1.3.6.1.4.1.9.9.848.2.2.6 | current |
| clGatewayWlanProfileConfigGroup OBJECT-GROUP This is a collection of objects which can be configured to control WLAN policy parameters of a gateway. | 1.3.6.1.4.1.9.9.848.2.2.7 | current |
| clApGatewayTunnelStatsGroup OBJECT-GROUP This is a collection of objects which can be read to obtain statistics of a gateway on an access point. | 1.3.6.1.4.1.9.9.848.2.2.8 | current |
| cLGatewayAAAProxyConfigGroup OBJECT-GROUP This is a collection of objects which can be defined to control AAA proxy configuration of a gateway. | 1.3.6.1.4.1.9.9.848.2.2.9 | current |
| cLTunnelConfigGroupRev3 OBJECT-GROUP This is a collection of objects which can be configured to control Tunnel parameters. | 1.3.6.1.4.1.9.9.848.2.2.10 | current |