CISCO-LWAPP-DOWNLOAD-MIB
- Registered at
- 1.3.6.1.4.1.9.9.513.4
- Last updated
- 2017-05-23 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2017-05-23 00:00
- Namespace
- cisco
- Source file
CISCO-LWAPP-DOWNLOAD-MIB- Digest
sha256:3cd26df362ae9102bf63d7d8326ca8e9c595496a28f0712ec27400e42c43569e
Description
This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. The relationship between the controller and the LWAPP APs is depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Wireless LAN Controller (WLC) Wireless LAN Controller are legacy mobility device which can participate in the new mobility architecture. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the controllers. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
Contact
Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-LWAPP-AP-MIB | cLApSysMacAddress, ciscoLwappApMIB |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-LWAPP-AP-MIB CISCO-LWAPP-DOT11-MIB CISCO-LWAPP-DOWNLOAD-MIB CISCO-LWAPP-RF-MIB CISCO-LWAPP-TC-MIB CISCO-LWAPP-WLAN-MIB CISCO-SMI CISCO-TC ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoLwappDownloadMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.4.0 | |||
| ciscoLwappDownloadMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.4.1 | |||
| ciscoLwappDLApBoot OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.4.1.1 | |||
| clDLApBootTable OBJECT-TYPE This table represents the primary and backup software image loaded on an AP. An entry in this table gets added when a AP associates to the controller and entry gets removed when AP disassociates from the controller. | 1.3.6.1.4.1.9.9.513.4.1.1.1 | not-accessible | current | |
| cldlApBootEntry OBJECT-TYPE Each (conceptual) entry in this table represents version information for a AP. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1 | not-accessible | current | |
| cldlAPName OBJECT-TYPE This object represents the name of the AP. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.1 | SnmpAdminString | read-only | current |
| cldlAPPrimaryVersion OBJECT-TYPE This object represents the AP primary image version. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.2 | SnmpAdminString | read-only | current |
| cldlAPBackupVersion OBJECT-TYPE This object represents the AP backup image version. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.3 | SnmpAdminString | read-only | current |
| cldlAPSwapImage OBJECT-TYPE This object specifies the action to swap the primary and backup images of the Access Point (AP). The value of 'true' indicates that, primary and backup images will be swapped. The value of 'false' indicates that, no action is taken. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.4 | TruthValue | read-write | current |
| cldlAPDownloadImage OBJECT-TYPE This object specifies configuration of the image type while downloading from WLC to Access Point(AP). A value of primary indicates that, primary image is downloaded from the controller. A value of backup indicates that, backup image is downloaded from the controller. A value of abort indicates that, active predownload of the image aborts on the controller. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.5 | INTEGER {primary(1), backup(2), abort(3)} | read-write | current |
| cldlPreDownloadVersion OBJECT-TYPE This object represents the AP predownloaded version. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.6 | SnmpAdminString | read-only | current |
| cldlPreDownloadStatus OBJECT-TYPE This object represents the status of the predownloaded image of the AP. A value of none(1) indicates that, nothing is predownloading. A value of intiated(2) indicates that, predownload initiated. A value of preDownloading(3) indicates that, predownload started. A value of completed(4) indicates that, predownload completed. A value of failed(5) indicates that, predownload failed. A value of notSupported(6) indicates that, predownload not supported. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.7 | INTEGER {none(1), intiated(2), preDownloading(3), completed(4), failed(5), notSupported(6)} | read-only | current |
| cldlPreDownloadNextRetryTime OBJECT-TYPE This object represents the next retry time for downloading the AP image from the WLC. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.8 | TimeInterval | read-only | current |
| cldlPreDownloadRetryCount OBJECT-TYPE This object represents the number of retry count before the AP image downloaded from the WLC. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.9 | Unsigned32 | read-only | current |
| cldlPredownloadImageUpgradeRole OBJECT-TYPE This object represents the efficient AP image upgrade role for the AP.To save time during AP pre-image downloading, one AP of same AP type can be configured as master which will first download image from controller and then slaves in that group will start downloading image from master. A value of masterCentral indicates that, master AP downloading image from controller. A value of masterLocal indicates that, master AP downloading image from another master. A value of slaveCentral indicates that, slave AP downloading image from controller. A value of slaveLocal indicates that, slave AP downloading image from master. A value of unknown indicates that, nothing is getting downloaded. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.10 | INTEGER {masterCentral(1), masterLocal(2), slaveCentral(3), slaveLocal(4), unknown(5)} | read-only | current |
| cldlAPSoftwareName OBJECT-TYPE This object represents the software name of the AP. | 1.3.6.1.4.1.9.9.513.4.1.1.1.1.11 | SnmpAdminString | read-only | current |
| ciscoLwappDLReset OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.4.1.2 | |||
| clDLResetTable OBJECT-TYPE This table represents the resetting schedule of the WLC. User resets WLC by adding a row to this table through explicit management action from the network manager. | 1.3.6.1.4.1.9.9.513.4.1.2.1 | not-accessible | current | |
| cldlResetEntry OBJECT-TYPE Each(conceptual) entry in this table represents the information about WLC reset. | 1.3.6.1.4.1.9.9.513.4.1.2.1.1 | not-accessible | current | |
| cldlResetIndex OBJECT-TYPE This object represents unique instance of scheduled reset vector of the controller. | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.1 | Unsigned32 | not-accessible | current |
| cldlResetDateAndTime OBJECT-TYPE This object specifies to schedule the future reset time of the controller. Format: MM/DD/YY:HH/MM/SS. | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.2 | DateAndTime | read-create | current |
| cldlResetSwapImage OBJECT-TYPE This object specifies whether swapping of the primary and backup images needs to be done after the WLC reset. On controller, there are primary and backup images, by default it will reboot with primary. A value of 'true' indicates that, primary and backup images need to be interchaged after the reset. A value of 'false' indicates that, primary and backup images are not interchanged after the reset. | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.3 | TruthValue | read-create | current |
| cldlResetAP OBJECT-TYPE This object specifies whether to reset all the APs associated to the controller during scheduled reset of the controller. The value of 'true' indicates that, resets all the APs. The value of 'false'indicates that, do not resets the APs. | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.4 | TruthValue | read-create | current |
| cldlResetRowStatus OBJECT-TYPE This is the status column for this row and is used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.5 | RowStatus | read-create | current |
| cldlResetSaveConfig OBJECT-TYPE This object specifies whether to save the configuration before rebooting the controller or not. The value of 'true' indicates that, save the configuration and resets the controller. The value of 'false' indicates that, resets the controller without saving configuration. | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.6 | TruthValue | read-create | current |
| cldlResetAlertTime OBJECT-TYPE This object specifies the number of seconds before the scheduled reset at which the trap message will be generated. if cldlResetDateAndTime is less than cldlResetAlertTime, then the ciscoLwappScheduledResetNotif notification will not be generated. | 1.3.6.1.4.1.9.9.513.4.1.2.1.1.7 | Unsigned32 | read-create | current |
| cldlResetBootImage OBJECT-TYPE This object specifies image to be loaded after reset. A value of primary(1) indicates that, image selected is primary. A value of backup(2) indicates that, image selected is secondary. | 1.3.6.1.4.1.9.9.513.4.1.2.2 | INTEGER {primary(1), backup(2)} | read-write | current |
| ciscoLwappDLRestart OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.4.1.3 | |||
| clDLRestartTable OBJECT-TYPE This table represents the restart schedule of the WLC. Restart is a quick reset method. User restarts WLC by adding a row to this table through explicit management action from the network manager. | 1.3.6.1.4.1.9.9.513.4.1.3.1 | not-accessible | current | |
| cldlRestartEntry OBJECT-TYPE Each (conceptual) entry in this table represents the information about WLC restart. | 1.3.6.1.4.1.9.9.513.4.1.3.1.1 | not-accessible | current | |
| cldlRestartIndex OBJECT-TYPE This object represents unique instance of scheduled restart vector of the controller. | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.1 | Unsigned32 | not-accessible | current |
| cldlRestartDateAndTime OBJECT-TYPE This object specifies future restart schedule time of the controller. Format: MM/DD/YY:HH/MM/SS. | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.2 | DateAndTime | read-create | current |
| cldlRestartAP OBJECT-TYPE This object specifies to reset all the APs associated to the controller.. The value of 'true' indicates that, all APs will be reset. The value of 'false' indicates that, all APs will not be reset. | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.3 | TruthValue | read-create | current |
| cldlRestartRowStatus OBJECT-TYPE This is the status column for this row and is used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.4 | RowStatus | read-create | current |
| cldlRestartSaveConfig OBJECT-TYPE This object specifies whether to save the configuration before rebooting the controller. The value of 'true' indicates that, configuration is saved and controller will be restarted. The value of 'false' indicates that, controller is restarted without saving the configuration. | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.5 | TruthValue | read-create | current |
| cldlRestartAlertTime OBJECT-TYPE This object specifies the number of seconds before the scheduled restart at which the trap message will be generated. Trap will not be generated if schedule restart time is less than the ResetAlert time. | 1.3.6.1.4.1.9.9.513.4.1.3.1.1.6 | Unsigned32 | read-create | current |
| ciscoLwappDownloadMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.4.2 | |||
| cldlMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.4.2.1 | |||
| cldlMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.513.4.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cldlScheduledResetNotif NOTIFICATION-TYPE This notification is generated before the Wireless LAN Controller (WLC) reset at time specified by the variable, cldlResetAlertTime. | 1.3.6.1.4.1.9.9.513.4.0.1 | current |
| cldlResetFailedNotif NOTIFICATION-TYPE This notification is generated if controller failed to scheduled reset. | 1.3.6.1.4.1.9.9.513.4.0.2 | current |
| cldlClearResetNotif NOTIFICATION-TYPE This notification is generated, when the reset entry is deleted from the table cldlReasetTable. | 1.3.6.1.4.1.9.9.513.4.0.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| cldlMIBCompliance MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappDownloadMIB module. | 1.3.6.1.4.1.9.9.513.4.2.1.1 | current |
| cldlApGroup OBJECT-GROUP This collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | 1.3.6.1.4.1.9.9.513.4.2.2.1 | current |
| cldlResetGroup OBJECT-GROUP This collection of objects represents the information about scheduled reset date and time of the controller. | 1.3.6.1.4.1.9.9.513.4.2.2.2 | current |
| cldlRestartGroup OBJECT-GROUP This collection of objects represents the information about restart date and time of the controller. | 1.3.6.1.4.1.9.9.513.4.2.2.3 | current |
| cldlNotifsGroup NOTIFICATION-GROUP This supplemental collection of objects represents the shecduled reset related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.513.4.2.2.4 | current |