CISCO-LWAPP-MESH-MIB
- Registered at
- 1.3.6.1.4.1.9.9.616
- Last updated
- 2021-04-27 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2021-04-27 00:00, 2019-04-11 00:00, 2018-09-12 00:00, 2017-06-09 00:00, 2010-10-07 00:00, 2010-03-03 00:00, 2007-03-09 00:00
- Namespace
- cisco
- Source file
CISCO-LWAPP-MESH-MIB- Digest
sha256:2befa5d03cf2ebc02761b2b938c1de8c33c63525435fd2bd4b3ce2ed0e4616b7
Description
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol (LWAPP) tunnel from Light-weight Access Points. This MIB represents information used in Wireless Mesh Network. MAP APs associates directly with RAP APs or with another MAP AP. Each association of AP (MAP-MAP or RAP-MAP) with another AP forms parent-child relationship. The deployment of the controller (referred to as CC in the diagram), mesh nodes (RAP and MAP) LWAPP APs, client(MS) and NMS appear as follows. +.......+ +.......+ + + + + + NMS + + NMS + + + + + +.......+ +.......+ . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + RAP + + RAP + + RAP + + RAP + + RAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MAP + + MS + + MAP + + MAP + + MAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . .. . . . . .. . . . . .. . . . . . . +......+ +......+ +......+ +......+. +......+ + + + + + + + + + + + MAP + + MAP + + MAP + + MAP + + MS + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters to the LWAPP APs. The APs encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity is also referred to as 'controller'. Mobile Station ( MS ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Station and client are used interchangeably. Network Management System ( NMS ) The station from which the administrator manages the wired and wireless networks. Mesh Node A mesh node is defined as a physical or logical entity in the mesh network participating in forming the mesh backhaul. RAP and MAP are two types of mesh nodes supported in mesh network. Root AP (RAP) The AP forming the bridge between a wired and a mesh network with an Ethernet interface to the wired network and a 802.11 radio interface to the mesh network Mesh AP (MAP). The AP extending wireless coverage similar to a repeater in a mesh network and consists of a 802.11 uplink and a 802.11 downlink. On a single-radio backhaul, both uplink and downlink exist on the same radio and are logical links only. On a multi-radio backhaul, they may exist on different radios. Mesh Network Network starting with the wireless backhaul downlink of the RAP and all the entities below except any attached network to the Ethernet link of MAPs. A mesh network below a single RAP is also referred to as a 'Mesh Sector'.A mesh network consists of mesh nodes. A single mesh network is always augmented to a single wired network. Mesh Link A logical 802.11 link between two mesh nodes. A single link is point-to-point. All point-to-multipoint links are considered as multiple mesh links. Often referred to as mesh backhaul link. Mesh Backhaul A mesh backhaul consists of mesh nodes and mesh links terminating at a RAP. This necessarily creates a one- to-one relationship between a 'mesh network', 'mesh sector' and a 'mesh backhaul' where these terms can be used interchangeably. SNR Signal to Noise ratio on the 802.11 radio. Bridged network The bridged network is defined as the network(s) attached to the Ethernet port of any MAP. There can be multiple such networks attached to a single mesh network. Mesh Node Roaming A mesh node may change its parent mesh node naturally when the RF/network condition changes. Child Mesh node will re-associate and re-authenticate to new parent mesh node. Mesh Security supports two types of mesh node roaming. Intra-controller - LWAPP session is not lost. Inter-controller - LWAPP session is lost. AMSDU Aggregate MAC Service Data Unit. A structure containing multiple MSDUs, transported within a single (unfragmented) or multiple (fragmented) Data MPDU. IDS Intrusion Detection Sysytem. A software to detect unwanted attempts at accessing,manipulating, and or disabling of WLC. ExtendedUA For 1524 APs, it has two 802.11a radios (slot1, slot2) and one 802.11b/g radio (slot0). This will enable the client access on 802.11a (slot1) for 152x series mesh access points with two 802.11a radios, where the wireless client association can be done over the 802.11a radio (slot1). With this feature we are providing an option to enable/disable backhaul client on another 802.11a radio (slot2) as well. This implies that a 152x series mesh access points with two 802.11a radios can carry both backhaul traffic and 802.11a (slot1, slot2) client traffic over the same radios. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
Contact
Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-LWAPP-AP-MIB | cLApName, cLApSysMacAddress |
| CISCO-LWAPP-TC-MIB | CLDot11Channel |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | Unsigned64 |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-LWAPP-AP-MIB CISCO-LWAPP-DOT11-MIB CISCO-LWAPP-MESH-MIB CISCO-LWAPP-RF-MIB CISCO-LWAPP-TC-MIB CISCO-LWAPP-WLAN-MIB CISCO-SMI CISCO-TC ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoLwappMeshMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.0 | |||
| ciscoLwappMeshMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.1 | |||
| ciscoLwappMeshConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.1.1 | |||
| clMeshNodeTable OBJECT-TYPE This table represents information about the 802.11 LWAPP Access Points that have joined the controller as part of a mesh network. | 1.3.6.1.4.1.9.9.616.1.1.1 | not-accessible | current | |
| clMeshNodeEntry OBJECT-TYPE Each entry represents a conceptual row in this table. An entry is created when MAP joins the controller. The entry is removed when the mesh node lose their association with the controller due to loss of communication with controller or when a mesh node is reset. | 1.3.6.1.4.1.9.9.616.1.1.1.1 | not-accessible | current | |
| clMeshNodeRole OBJECT-TYPE This object specifies the role of mesh AP which has joined the controller. See glossary section above for detail about MAP and RAP. map - AP is configured as mesh. rap - AP is configured as root. | 1.3.6.1.4.1.9.9.616.1.1.1.1.1 | INTEGER {map(1), rap(2)} | read-write | current |
| clMeshNodeGroupName OBJECT-TYPE This object specifies the group name of the mesh sector. MAP AP will join the mesh sector which has the same group name configured on RAP AP. | 1.3.6.1.4.1.9.9.616.1.1.1.1.2 | SnmpAdminString (SIZE(0..10)) | read-write | current |
| clMeshNodeBackhaul OBJECT-TYPE This object represents 802.11 interface type of the backhaul link. See Mesh Link in glossary section for more detail on backhaul link. dot11a - 802.11a radio is used as backhaul link. dot11b - 802.11b radio is used as backhaul link. dot11g - 802.11g radio is used as backhaul link. | 1.3.6.1.4.1.9.9.616.1.1.1.1.3 | INTEGER {dot11a(1), dot11b(2), dot11g(3)} | read-only | current |
| clMeshNodeBackhaulDataRate OBJECT-TYPE This object represents the rate at which packets are sent on the backhaul link. This object has been deprecated for clMeshNodeBHDataRate. | 1.3.6.1.4.1.9.9.616.1.1.1.1.4 | Unsigned32 | read-write | deprecated |
| clMeshNodeEthernetBridge OBJECT-TYPE This object specifies whether ethernet bridge is enabled or not. A value of 'true' indicates ethernet bridging is enable on this mesh node. A value of 'false indicates ethernet bridging is not enable on this mesh node. Ethernet bridging can be enabled on RAP or MAP. | 1.3.6.1.4.1.9.9.616.1.1.1.1.5 | TruthValue | read-write | current |
| clMeshNodeEthernetLinkStatus OBJECT-TYPE This object represents whetherthe link is up or down on the ethernet port of the RAP or MAP. up - ethernet link is up. down - ethernet link is down. | 1.3.6.1.4.1.9.9.616.1.1.1.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| clMeshNodePublicSafetyBackhaul OBJECT-TYPE 4.9Ghz considered to be public safety band and is limited to some service providers. A value of true indicates that 4.9 Ghz can be used on backhaul link by selecting channel on the 802.11a backhaul radio. Since public safety is now set at the controller level rather then at the AP level, use of this variable is deprecated, and the global setting clMeshPublicSafetyBackhaulGlobal should be used instead. | 1.3.6.1.4.1.9.9.616.1.1.1.1.7 | TruthValue | read-write | deprecated |
| clMeshNodeParentMacAddress OBJECT-TYPE This object represents the MAC address of a parent mesh node. In case of RAP this object will return 0000000000000. | 1.3.6.1.4.1.9.9.616.1.1.1.1.8 | MacAddress | read-only | current |
| clMeshNodeHeaterStatus OBJECT-TYPE This object represents the heater status of the mesh node. on - heater is in operation off - heater is not operation. | 1.3.6.1.4.1.9.9.616.1.1.1.1.9 | INTEGER {on(1), off(2)} | read-only | current |
| clMeshNodeInternalTemp OBJECT-TYPE This object represents the internal temperature of mesh node in celsius. | 1.3.6.1.4.1.9.9.616.1.1.1.1.10 | Integer32 | read-only | current |
| clMeshNodeType OBJECT-TYPE This object represents the type of mesh node. indoor - Mesh node which is manufactured to be used inside the building. outdoor - Mesh node which can be used outside building in open environment. | 1.3.6.1.4.1.9.9.616.1.1.1.1.11 | INTEGER {indoor(1), outdoor(2)} | read-only | current |
| clMeshNodeHops OBJECT-TYPE This object represents the number of hops a MAP mesh node is from RAP. When the clMeshNodeRole is set to 'RAP' this object will return a value of zero. | 1.3.6.1.4.1.9.9.616.1.1.1.1.12 | Gauge32 | read-only | current |
| clMeshNodeChildCount OBJECT-TYPE This object represents the number of children MAPs of a RAP or a MAP. | 1.3.6.1.4.1.9.9.616.1.1.1.1.13 | Gauge32 | read-only | current |
| clMeshNodeBackhaulRadio OBJECT-TYPE This object specifies the type of radio used for backhaul access. unknown (1) unsupported APs dot11bg (2) The value dot11b sets the 802.11b radio as backhaul radio dot11a (3) The value dot11a sets the 802.11a radio as backhaul radio | 1.3.6.1.4.1.9.9.616.1.1.1.1.14 | INTEGER {unknown(1), dot11bg(2), dot11a(3)} | read-write | current |
| clMeshNodeBHDataRate OBJECT-TYPE This object specifies the rate at which packets are sent on the backhaul link. Depending on the backhaul radio type, denoted by clMeshNodeBackhaul object, data rate will vary. If the value of clMeshNodeBackhaul object is 'dot11a', data rates can be one of the following possible values. mbps6(4) mbps9(5) mbps12(7) mbps18(8) mbps24(9) mbps36(10) mbps48(11) mbps54(12) auto(13) Additionally following data rates are supported if 802.11a supports 11n. htMcs0(14) htMcs1(15) htMcs2(16) htMcs3(17) htMcs4(18) htMcs5(19) htMcs6(20) htMcs7(21) htMcs8(22) htMcs9(23) htMcs10(24) htMcs11(25) htMcs12(26) htMcs13(27) htMcs14(28) htMcs15(29) If the value of clMeshNodeBackhaul object is 'dot11b', then data rate can be one of the following possible values. mbps1(1) mbps2(2) mbps5point5(3) mbps11(6) auto(13) If the value of clMeshNodeBackhaul object is 'dot11g', then data rate can be one of the following possible values. mbps1(1) mbps2(2) mbps5point5(3) mbps6(4) mbps9(5) mbps11(6) mbps12(7) mbps18(8) mbps24(9) mbps36(10) mbps48(11) mbps54(12) auto(13) | 1.3.6.1.4.1.9.9.616.1.1.1.1.15 | INTEGER {mbps1(1), mbps2(2), mbps5point5(3), mbps6(4), mbps9(5), mbps11(6), mbps12(7), mbps18(8), mbps24(9), mbps36(10), mbps48(11), mbps54(12), auto(13), htMcs0(14), htMcs1(15), htMcs2(16), htMcs3(17), htMcs4(18), htMcs5(19), htMcs6(20), htMcs7(21), htMcs8(22), htMcs9(23), htMcs10(24), htMcs11(25), htMcs12(26), htMcs13(27), htMcs14(28), htMcs15(29), htMcs16(30), htMcs17(31), htMcs18(32), htMcs19(33), htMcs20(34), htMcs21(35), htMcs22(36), htMcs23(37), vhtMcs0Ss1(38), vhtMcs1Ss1(39), vhtMcs2Ss1(40), vhtMcs3Ss1(41), vhtMcs4Ss1(42), vhtMcs5Ss1(43), vhtMcs6Ss1(44), vhtMcs7Ss1(45), vhtMcs8Ss1(46), vhtMcs9Ss1(47), vhtMcs0Ss2(48), vhtMcs1Ss2(49), vhtMcs2Ss2(50), vhtMcs3Ss2(51), vhtMcs4Ss2(52), vhtMcs5Ss2(53), vhtMcs6Ss2(54), vhtMcs7Ss2(55), vhtMcs8Ss2(56), vhtMcs9Ss2(57), vhtMcs0Ss3(58), vhtMcs1Ss3(59), vhtMcs2Ss3(60), vhtMcs3Ss3(61), vhtMcs4Ss3(62), vhtMcs5Ss3(63), vhtMcs6Ss3(64), vhtMcs7Ss3(65), vhtMcs8Ss3(66), vhtMcs9Ss3(67), default(65535)} | read-write | current |
| clMeshDaisyChainEnabled OBJECT-TYPE This object specifies whether an AP operating in mesh mode has daisy chaining mode enabled. A daisy chain is a wiring scheme in which multiple devices are wired together in sequence or in a ring. A value of 'true' indicates that mesh daisy chaining is enabled. A value of 'false' indicates that mesh daisy chaining is disabled. | 1.3.6.1.4.1.9.9.616.1.1.1.1.16 | TruthValue | read-write | current |
| clMeshPrefParentMacAddress OBJECT-TYPE This object represents the MAC address of the preferred parent for this mesh node. | 1.3.6.1.4.1.9.9.616.1.1.1.1.17 | MacAddress | read-write | current |
| clMeshNodeBGNStrictMatch OBJECT-TYPE This object specifies whether an AP operating in mesh mode needs to have needs to have strict bridge group matching enabled or not. A value of 'true' indicates that strict bridge group name matching is enabled. A value of 'false' indicates that strict bridge group name matching is enabled. | 1.3.6.1.4.1.9.9.616.1.1.1.1.18 | TruthValue | read-write | current |
| clMeshNodeVlanEnabled OBJECT-TYPE This object specifies whether an AP operating in mesh mode has VLAN support enabled. If flexconnect local switching is enabled, it will return the same value as cLReapApVlanEnable. A value of 'true' indicates VLAN support enabled. A value of 'false' indicates VLAN support disabled. | 1.3.6.1.4.1.9.9.616.1.1.1.1.19 | TruthValue | read-write | current |
| clMeshNodeNativeVlanId OBJECT-TYPE This object specifies the native VLAN ID configured on the AP. If flexconnect local switching is enabled, it will return the same value as cLReapApNativeVlanId. | 1.3.6.1.4.1.9.9.616.1.1.1.1.20 | Unsigned32 | read-write | current |
| clMeshNodePskKeyClear OBJECT-TYPE This object specifies clearing of PSK key. A value of 'true' indicates PSK key will be cleared. A value of 'false' indicates PSK key wont be cleared. | 1.3.6.1.4.1.9.9.616.1.1.1.1.21 | TruthValue | read-write | current |
| clMeshNodeRAPDownlinkBackhaul OBJECT-TYPE This objects specifies the current backhaul slot of the RAP. And also used to configure/change the backhaul slot of the RAP. slot0 - downlink backhaul access for slot 0 enabled. slot1 - downlink backhaul access for slot 1 enabled. | 1.3.6.1.4.1.9.9.616.1.1.1.1.22 | INTEGER {unknown(0), slot0(1), slot1(2)} | read-write | current |
| clMeshNodeBlockChild OBJECT-TYPE This object specifies Block Child state for the AP. A value of 'true' indicates block child state is enabled. A value of 'false' indicates block child state is disabled. | 1.3.6.1.4.1.9.9.616.1.1.1.1.23 | TruthValue | read-write | current |
| clMeshNodeBhaulDataRateType OBJECT-TYPE This object specifies the backhaul tx data rate type for Mesh AP. And also used to configure/change the mesh backhaul data rate for AP. auto - Backhaul tx rate is automatically selected dot11abg - Backhaul tx rate is 802.11abg, one of 1000, 2000, 5500, 11000, 6000, 9000, 12000, 18000, 24000, 36000, 48000, 54000 in kbps. dot11n - Backhaul tx rate is one of the 802.11n mcs rate. dot11ac - Backhaul tx rate is one of the 802.11ac mcs rate. dot11ax - Backhaul tx rate is one of the 802.11ax mcs rate. | 1.3.6.1.4.1.9.9.616.1.1.1.1.24 | INTEGER {auto(1), dot11abg(2), dot11nMcs(3), dot11acMcs(4), dot11axMcs(5)} | read-write | current |
| clMeshNodeBhaulDataRate OBJECT-TYPE This object specifies the backhaul tx rate in kbps Backhaul tx rate is one of 1000, 2000, 5500, 11000, 6000, 9000, 12000, 18000, 24000, 36000, 48000, 54000 | 1.3.6.1.4.1.9.9.616.1.1.1.1.25 | INTEGER {auto(1), mbps1(1000), mbps2(2000), mbps5point5(5500), mbps6(6000), mbps9(9000), mbps11(11000), mbps12(12000), mbps18(18000), mbps24(24000), mbps36(36000), mbps48(48000), mbps54(54000)} | read-write | current |
| clMeshNodeBhaulDataRateMcsIndex OBJECT-TYPE This object specifies the backhaul tx rate 802.11n/ac mcs index Backhaul mcs index is between 0 to 31 for 802.11n and 0 to 9 for 802.11ac. | 1.3.6.1.4.1.9.9.616.1.1.1.1.26 | Unsigned32 | read-write | current |
| clMeshNodeBhaulDataRateDot11acSpatialStream OBJECT-TYPE This object specifies the backhaul rate 802.11ac spatial stream value of backhaul rate spatial stream is between 1 to 4. | 1.3.6.1.4.1.9.9.616.1.1.1.1.27 | Unsigned32 | read-write | current |
| clMeshNodeBhaulDataRateDot11axSpatialStream OBJECT-TYPE This object specifies the backhaul rate 802.11ax spatial stream value. Range of 1 - 4 for 802.11bg and 1 - 8 for 802.11 radio. | 1.3.6.1.4.1.9.9.616.1.1.1.1.28 | Unsigned32 | read-write | current |
| clMeshPskTable OBJECT-TYPE This table represents information about the PSK Keys configured on the WLC for the MESH AP authentication. | 1.3.6.1.4.1.9.9.616.1.1.2 | not-accessible | current | |
| clMeshPskEntry OBJECT-TYPE Each entry in this table represents the information about PSK Key. | 1.3.6.1.4.1.9.9.616.1.1.2.1 | not-accessible | current | |
| clMeshPskIndex OBJECT-TYPE This object uniquely identifies the one instance of the PSK. Maximum five entries are maintained. For each key configuration old key will be pushed down and new key will be placed at top. After fifth key configuration, old key will be deleted based on timestamp and new key will be placed at top of the list. | 1.3.6.1.4.1.9.9.616.1.1.2.1.1 | Unsigned32 | not-accessible | current |
| clMeshPskKey OBJECT-TYPE This object specifies the pre-shared key used for authenticating mesh AP during joining process. | 1.3.6.1.4.1.9.9.616.1.1.2.1.2 | OCTET STRING (SIZE(3..32)) | read-create | current |
| clMeshPskTimeStamp OBJECT-TYPE This object specifies the time when the PSK key was configured on WLC. | 1.3.6.1.4.1.9.9.616.1.1.2.1.3 | SnmpAdminString | read-only | current |
| clMeshPskKeyDesc OBJECT-TYPE This object specifies the description for the pre-shared key. | 1.3.6.1.4.1.9.9.616.1.1.2.1.4 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| clMeshPskRowStatus OBJECT-TYPE This object specifies the status column for this row and used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.616.1.1.2.1.5 | RowStatus | read-create | current |
| clMeshProfileTable OBJECT-TYPE This table lists the configuration for each Mesh profile. | 1.3.6.1.4.1.9.9.616.1.1.3 | not-accessible | current | |
| clMeshProfileEntry OBJECT-TYPE An entry containing the configuration attributes that affect the operation of Mesh Access points. Entries can be added/deleted by explicit management action from NMS/EMS or through user console. | 1.3.6.1.4.1.9.9.616.1.1.3.1 | not-accessible | current | |
| cLMeshProfileName OBJECT-TYPE This object uniquely identifies a Mesh Profile. | 1.3.6.1.4.1.9.9.616.1.1.3.1.1 | SnmpAdminString (SIZE(1..32)) | not-accessible | current |
| cLMeshProfileDescr OBJECT-TYPE This object specifies a human-readable description of the profile. | 1.3.6.1.4.1.9.9.616.1.1.3.1.2 | SnmpAdminString (SIZE(1..64)) | read-create | current |
| cLMeshProfileASTools OBJECT-TYPE This object specifies if anti-stranding tools are enabled. | 1.3.6.1.4.1.9.9.616.1.1.3.1.3 | TruthValue | read-create | current |
| cLMeshProfileAmsdu OBJECT-TYPE This object specifies if aggregation of MSDU is enabled. | 1.3.6.1.4.1.9.9.616.1.1.3.1.4 | TruthValue | read-create | current |
| cLMeshProfileBackgroundScan OBJECT-TYPE This object specifies if background scanning is enabled. | 1.3.6.1.4.1.9.9.616.1.1.3.1.5 | TruthValue | read-create | current |
| cLMeshProfileCcnMode OBJECT-TYPE This object specifies if change channel notification needs to be sent or not by parent AP to all its children when parent AP changes channel | 1.3.6.1.4.1.9.9.616.1.1.3.1.6 | TruthValue | read-create | current |
| cLMeshProfileUniversalAccess OBJECT-TYPE This object specifies if client can connect to backhaul radio or not. | 1.3.6.1.4.1.9.9.616.1.1.3.1.7 | TruthValue | read-create | current |
| cLMeshProfileEtherVlanTransparent OBJECT-TYPE This object specifies the vlan transparent mode status. Vlan transparent mode will allow all the VLANs on secondary ethernet interface. | 1.3.6.1.4.1.9.9.616.1.1.3.1.8 | TruthValue | read-create | current |
| cLMeshProfileFullSectorDfs OBJECT-TYPE This object specifies whether DFS is enabled or not in Mesh network. | 1.3.6.1.4.1.9.9.616.1.1.3.1.9 | TruthValue | read-create | current |
| cLMeshProfileIdsState OBJECT-TYPE This object specifies if Ids reporting is enabled or not for Mesh APs. | 1.3.6.1.4.1.9.9.616.1.1.3.1.10 | TruthValue | read-create | current |
| cLMeshProfileMulticastMode OBJECT-TYPE This object specifies multicast mode for ethernet bridged clients. | 1.3.6.1.4.1.9.9.616.1.1.3.1.11 | INTEGER {modeRegular(1), modeIn(2), modeOut(3)} | read-create | current |
| cLMeshProfileRange OBJECT-TYPE This object specifies the optimal distance in feet between RAP and MAP for backhaul link without degrading SNR value. | 1.3.6.1.4.1.9.9.616.1.1.3.1.12 | Unsigned32 | read-create | current |
| cLMeshProfileSecurityMode OBJECT-TYPE This object specifies authentication mode of RAP and MAP mesh nodes in controller. none - no authentication is done. psk - pre shared key. Keys provided during manufacturing will be used for authentication of mesh node. eap - extensible authentication protocol is used to authenticate mesh node. A value of 'eap' indicates, authentication can happen by local-auth in controller or by RADIUS server configured in controller. | 1.3.6.1.4.1.9.9.616.1.1.3.1.13 | INTEGER {eap(1), psk(2)} | read-create | current |
| cLMeshProfileConvergenceMethod OBJECT-TYPE This object specifies convergence method used by AP during link failure. | 1.3.6.1.4.1.9.9.616.1.1.3.1.14 | INTEGER {standard(1), fast(2), veryFast(3), noiseTolerentFast(4)} | read-create | current |
| cLMeshProfileLscOnlyAuthentication OBJECT-TYPE This object specifies status of cLMeshProfileLscOnlyAuthentication | 1.3.6.1.4.1.9.9.616.1.1.3.1.15 | TruthValue | read-create | current |
| cLMeshProfileBridgeGroupName OBJECT-TYPE This object indicates bridge group name configured for mesh APs. | 1.3.6.1.4.1.9.9.616.1.1.3.1.16 | SnmpAdminString (SIZE(0..10)) | read-create | current |
| cLMeshProfileBGNStrictmatch OBJECT-TYPE This object specifies whether an AP operating in mesh mode needs to have strict bridge group matching enabled or not. | 1.3.6.1.4.1.9.9.616.1.1.3.1.17 | TruthValue | read-create | current |
| cLMeshProfileEthernetBridging OBJECT-TYPE This object specifies whether ethernet bridging is enabled or not. | 1.3.6.1.4.1.9.9.616.1.1.3.1.18 | TruthValue | read-create | current |
| cLMeshProfileBatteryState OBJECT-TYPE This object specifies if battery state will be updated by AP or not. | 1.3.6.1.4.1.9.9.616.1.1.3.1.19 | TruthValue | read-create | current |
| cLMeshProfileAuthorizationMethod OBJECT-TYPE This object specifies authorization method for mesh APs. | 1.3.6.1.4.1.9.9.616.1.1.3.1.20 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| cLMeshProfileAuthenticationMethod OBJECT-TYPE This object specifies authentication method for mesh APs. | 1.3.6.1.4.1.9.9.616.1.1.3.1.21 | SnmpAdminString (SIZE(0..32)) | read-create | current |
| cLMeshProfileDot11bgBhaulRateType OBJECT-TYPE This object specifies mesh backhaul data rate type for 802.11bg backhaul radio | 1.3.6.1.4.1.9.9.616.1.1.3.1.22 | INTEGER {auto(1), dot11abg(2), dot11nMcs(3), dot11axMcs(4)} | read-create | current |
| cLMeshProfileDot11bgBhaulRate OBJECT-TYPE This object specifies the 802.11bg data rate for Mesh backhaul tx traffic. | 1.3.6.1.4.1.9.9.616.1.1.3.1.23 | INTEGER {auto(1), mbps1(1000), mbps2(2000), mbps5point5(5500), mbps6(6000), mbps9(9000), mbps11(11000), mbps12(12000), mbps18(18000), mbps24(24000), mbps36(36000), mbps48(48000), mbps54(54000)} | read-create | current |
| cLMeshProfileDot11bgBhaulRateDot11nMcsIndex OBJECT-TYPE This object specifies the 802.11n mcs index for Mesh backhaul tx traffic with 802.11bg radio | 1.3.6.1.4.1.9.9.616.1.1.3.1.24 | Unsigned32 | read-create | current |
| cLMeshProfileDot11aBhaulRateType OBJECT-TYPE This object specifies mesh backhaul data rate type for 802.11a backhaul radio. | 1.3.6.1.4.1.9.9.616.1.1.3.1.25 | INTEGER {auto(1), dot11abg(2), dot11nMcs(3), dot11acMcs(4), dot11axMcs(5)} | read-create | current |
| cLMeshProfileDot11aBhaulRate OBJECT-TYPE This object specifies the 802.11a data rate for Mesh backhaul tx traffic. | 1.3.6.1.4.1.9.9.616.1.1.3.1.26 | INTEGER {auto(1), mbps6(6000), mbps9(9000), mbps12(12000), mbps18(18000), mbps24(24000), mbps36(36000), mbps48(48000), mbps54(54000)} | read-create | current |
| cLMeshProfileDot11aBhaulRateDot11nMcsIndex OBJECT-TYPE This object specifies the 802.11n mcs index for Mesh backhaul tx traffic with 802.11a radio. | 1.3.6.1.4.1.9.9.616.1.1.3.1.27 | Unsigned32 | read-create | current |
| cLMeshProfileDot11aBhaulRateDot11acMcsIndex OBJECT-TYPE This object specifies the 802.11ac mcs index for Mesh backhaul tx traffic with 802.11a radio. | 1.3.6.1.4.1.9.9.616.1.1.3.1.28 | Unsigned32 | read-create | current |
| cLMeshProfileDot11aBhaulRateDot11acSpatialStream OBJECT-TYPE This object specifies the 802.11ac mcs spatial stream for Mesh backhaul tx traffic with 802.11a radio. | 1.3.6.1.4.1.9.9.616.1.1.3.1.29 | Unsigned32 | read-create | current |
| clMeshProfileRowStatus OBJECT-TYPE This object specifies the status column for this row and used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.616.1.1.3.1.30 | RowStatus | read-create | current |
| cLMeshProfileDot11bgBhaulRateDot11axMcsIndex OBJECT-TYPE This object specifies the 802.11ax mcs index for Mesh backhaul tx traffic with 802.11bg radio. | 1.3.6.1.4.1.9.9.616.1.1.3.1.31 | Unsigned32 (0..11) | read-create | current |
| cLMeshProfileDot11bgBhaulRateDot11axSpatialStream OBJECT-TYPE This object specifies the 802.11ax mcs spatial stream for Mesh backhaul tx traffic with 802.11bg radio. | 1.3.6.1.4.1.9.9.616.1.1.3.1.32 | Unsigned32 (1..4) | read-create | current |
| cLMeshProfileDot11aBhaulRateDot11axMcsIndex OBJECT-TYPE This object specifies the 802.11ax mcs index for Mesh backhaul tx traffic with 802.11a radio. | 1.3.6.1.4.1.9.9.616.1.1.3.1.33 | Unsigned32 (0..11) | read-create | current |
| cLMeshProfileDot11aBhaulRateDot11axSpatialStream OBJECT-TYPE This object specifies the 802.11ax mcs spatial stream for Mesh backhaul tx traffic with 802.11a radio. | 1.3.6.1.4.1.9.9.616.1.1.3.1.34 | Unsigned32 (1..8) | read-create | current |
| ciscoLwappMeshGlobalConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.1.2 | |||
| clMeshNodeRange OBJECT-TYPE This object specifies the optimal distance in feet between RAP and MAP for backhaul link without degrading SNR value. | 1.3.6.1.4.1.9.9.616.1.2.1 | Unsigned32 (150..132000) | read-write | current |
| clMeshBackhaulClientAccess OBJECT-TYPE This object specifies whether client access needs to be allowed on backhaul link. If AP has two radios,802.11a and 802.11bg, then radio which is used as backhaul link does not have client access.If AP has only one radio then same radio is used for backhaul and client access. A value of 'true' indicates client access is present on backhaul link. A value of 'false' indicates backhaul client access disabled. | 1.3.6.1.4.1.9.9.616.1.2.2 | TruthValue | read-write | current |
| clMeshMacFilterList OBJECT-TYPE This object specifies whether mac filtering needs to be enabled on controller for joining mesh AP. A value of 'true' indicates that mesh mac filter is enabled. A value of 'false' indicates that mesh node can join controller even if mesh node MAC address is not in MAC filter list. | 1.3.6.1.4.1.9.9.616.1.2.3 | TruthValue | read-write | current |
| clMeshMeshNodeAuthFailureThreshold OBJECT-TYPE This object specifies the authorization failure threshold value. When the number of failures exceeds this value then 'ciscoLwappMeshAuthFailure' notification is raised. | 1.3.6.1.4.1.9.9.616.1.2.4 | Unsigned32 (1..30) | read-write | current |
| clMeshMeshChildAssociationFailuresThreshold OBJECT-TYPE This object specifies the number of failed association to controller occurred through a parent mesh node. When this values exceeds then 'ciscoLwappMeshChildExcludedParent' notification is raised. | 1.3.6.1.4.1.9.9.616.1.2.5 | Unsigned32 (10..30) | read-write | current |
| clMeshMeshChildExcludedParentInterval OBJECT-TYPE This object specifies the time interval during which a child mesh node will exclude a parent mesh node. During this interval child will not try to associate the controller through the parent mesh node. | 1.3.6.1.4.1.9.9.616.1.2.6 | TimeInterval (18000..96000) | read-write | current |
| clMeshSNRThresholdAbate OBJECT-TYPE This object specifies the abate threshold value of SNR. This threshold value is use to determine if the SNR value seen by the child mesh node has reached acceptable level and is use to trigger the 'ciscoLwappMeshAbateSNR' notification. | 1.3.6.1.4.1.9.9.616.1.2.7 | Unsigned32 (3..50) | read-write | current |
| clMeshSNRThresholdOnset OBJECT-TYPE This object specifies the onset threshold value of SNR. This threshold value is use to determine if the SNR value seen by the child mesh node has reached below unacceptable level and is use to trigger the 'ciscoLwappMeshOnsetSNR' notification. | 1.3.6.1.4.1.9.9.616.1.2.8 | Unsigned32 (3..50) | read-write | current |
| clMeshSNRCheckTimeInterval OBJECT-TYPE This object represents the time interval after which SNR value is checked by child mesh node. | 1.3.6.1.4.1.9.9.616.1.2.9 | TimeInterval (18000..96000) | read-only | current |
| clMeshExcessiveParentChangeThreshold OBJECT-TYPE This object specifies the threshold for the number of times a child mesh node changes its parent. If number of parent change exceeds this value with in the time interval defined by object 'clMeshExcessiveParentChangeInterval' then the 'ciscoLwappMeshExcessiveParentChange' notification is raised. | 1.3.6.1.4.1.9.9.616.1.2.10 | Unsigned32 (1..20) | read-write | current |
| clMeshExcessiveParentChangeInterval OBJECT-TYPE This object specifies the time interval during which number of times a child mesh node changes its parent change is counted. If number of parent change exceeds the value defined by the object 'clMeshExcessiveParentChangeThreshold' with in this time interval then the 'ciscoLwappMeshExcessiveParentChange' notification is raised. | 1.3.6.1.4.1.9.9.616.1.2.11 | TimeInterval (180000..360000) | read-write | current |
| clMeshBackgroundScan OBJECT-TYPE This object specifies whether mesh AP can scans its neighbors on different channel other than only its current channel on backhaul link. A value of 'true' indicates mesh background scan enabled. A value of 'false' indicates mesh background scan disabled. | 1.3.6.1.4.1.9.9.616.1.2.12 | TruthValue | read-write | current |
| clMeshAuthenticationMode OBJECT-TYPE This object specifies authentication mode of RAP and MAP mesh nodes in controller. none - no authentication is done. psk - pre shared key. Keys provided during manufacturing will be used for authentication of mesh node. eap - extensible authentication protocol is used to authenticate mesh node. A value of 'eap' indicates, authentication can happen by local-auth in controller or by RADIUS server configured in controller. | 1.3.6.1.4.1.9.9.616.1.2.13 | INTEGER {none(1), eap(2), psk(3)} | read-write | current |
| clMeshExcessiveHopCountThreshold OBJECT-TYPE This object specifies threshold number of hops from the MAP node to the RAP. Crossing this value will raise the 'ciscoLwappMeshExcessiveHopCount' notification. | 1.3.6.1.4.1.9.9.616.1.2.14 | Unsigned32 (1..20) | read-write | current |
| clMeshExcessiveRapChildThreshold OBJECT-TYPE This object specifies threshold number of children MAPs attached to a parent RAP. Crossing this value will raise the 'ciscoLwappMeshExcessiveChildren' notification. | 1.3.6.1.4.1.9.9.616.1.2.15 | Unsigned32 (1..20) | read-write | current |
| clMeshExcessiveMapChildThreshold OBJECT-TYPE This object specifies threshold number of children MAPs attached to a parent MAP. Crossing this value will raise the 'ciscoLwappMeshExcessiveChildren' notification. | 1.3.6.1.4.1.9.9.616.1.2.16 | Unsigned32 (1..20) | read-write | current |
| clMeshHighSNRThresholdAbate OBJECT-TYPE This object specifies the abate threshold value of SNR. This threshold value is used to determine if the SNR value seen by the child mesh node has reached below this level and is use to trigger the 'ciscoLwappMeshAbateHighSNR' notification. | 1.3.6.1.4.1.9.9.616.1.2.17 | Unsigned32 (50..80) | read-write | current |
| clMeshHighSNRThresholdOnset OBJECT-TYPE This object specifies the onset threshold value of SNR. This threshold value is use to determine if the SNR value seen by the child mesh node has reached above this level and is use to trigger the 'ciscoLwappMeshOnsetHighSNR' notification. | 1.3.6.1.4.1.9.9.616.1.2.18 | Unsigned32 (50..80) | read-write | current |
| clMeshPublicSafetyBackhaulGlobal OBJECT-TYPE This object specifies user to enable 4.9Ghz as backhaul link which is considered to be public safety band limited to some service providers. A value of 'true' indicates that 4.9 Ghz can be used on backhaul link by selecting channel on the 802.11a backhaul radio. A value of 'false' indicates that 4.9 Ghz cannot be used on backhaul link by selecting channel on the 802.11a backhaul radio. This setting applies at the controller level. The prior per AP setting clMeshNodePublicSafetyBackhaul is deprecated as a result. | 1.3.6.1.4.1.9.9.616.1.2.19 | TruthValue | read-write | current |
| clMeshisAMSDUEnable OBJECT-TYPE This object specifies the Aggreation Service Data Unit at MAC layer (AMSDU) status. A value of 'true' indicates that AMSDU is enabled. A value of 'false' indicates that AMSDU is disabled. | 1.3.6.1.4.1.9.9.616.1.2.20 | TruthValue | read-write | current |
| clMeshIsIdsEnable OBJECT-TYPE This object specifies the Rogue and Signature Detection status. A value of 'true' indicates that IDS is enabled. A value of 'false' indicates that IDS is disabled. | 1.3.6.1.4.1.9.9.616.1.2.21 | TruthValue | read-write | current |
| clMeshIsDCAChannelsEnable OBJECT-TYPE This object specifies the Dynamic Channel Assignment status. A value of 'true' indicates DCA feature for AP1524SB is enabled. A value of 'false' indicates DCA feature for AP1524SB is disabled. This is not implies for non-1524SB APs. Error will return if it is set for non-1524SB APs. | 1.3.6.1.4.1.9.9.616.1.2.22 | TruthValue | read-write | current |
| clMeshIsExtendedUAEnable OBJECT-TYPE This object specifies the Universal Client Access status. A value of 'true' indicates that ExtendedUA feature is enabled. A value of 'false' indicates that ExtendedUA feature is disabled. | 1.3.6.1.4.1.9.9.616.1.2.23 | TruthValue | read-write | current |
| clMeshIsBDomainChannelsEnable OBJECT-TYPE This object specifies the UNI1 Channel status. A value of 'true' indicates that B domain channels for outdoor mesh AP can be alllowed. A value of 'false' indicates that B domain channels for outdoor mesh AP cannot be allowed. This doesnot implies for non-outdoor mesh APs. | 1.3.6.1.4.1.9.9.616.1.2.24 | TruthValue | read-write | current |
| clMeshPskKeyProvisionEnable OBJECT-TYPE This object specifies the PSK key provisioning status. A value of 'true' indicates that PSK Key provisioning is enabled. A value of 'false' indicates that PSK Key provisioning is disabled. | 1.3.6.1.4.1.9.9.616.1.2.25 | TruthValue | read-write | current |
| clMeshPskKeyWindowEnable OBJECT-TYPE This object specifies the PSK key provisioning window status. A value of 'true' indicates that PSK Key provisioning window is enabled. A value of 'false' indicates that PSK Key provisioning window is disabled. | 1.3.6.1.4.1.9.9.616.1.2.26 | TruthValue | read-write | current |
| clMeshEthenetBridgingVlanTransparent OBJECT-TYPE This object specifies the vlan transparent mode status. Vlan transparent mode will allow all the VLANs on secondary ethernet interface A value of 'true' indicates that Vlan Transparent mode is enabled. A value of 'false' indicates that Vlan Transparent mode is disabled. | 1.3.6.1.4.1.9.9.616.1.2.27 | TruthValue | read-write | current |
| clMeshRAPDownlinkBackhaul OBJECT-TYPE This objects specifies the global config of Mesh backhaul slot configured on the WLC. And also used to configure/change the backhaul slot of RAPs joined to the WLC. slot0 - downlink backhaul access for slot0 is enabled. slot1 - downlink backhaul access for slot1 is enabled. | 1.3.6.1.4.1.9.9.616.1.2.28 | INTEGER {unknown(0), slot0(1), slot1(2)} | read-write | current |
| clMeshPskInUseKeyIndex OBJECT-TYPE This object specifies the psk key index which is currently in use out of the configured PSK keys for Mesh Access Point Authorization | 1.3.6.1.4.1.9.9.616.1.2.29 | Unsigned32 (1..5) | read-write | current |
| clMeshEthBridgingAllowBpdu OBJECT-TYPE This object specifies whether we should allow BPDU packets in the mesh network when ethernet bridging is enabled. A value of 'true' indicates BPDU packets are allowed in mesh network. A value of 'false' indicates BPDU packets are dropped in mesh network. | 1.3.6.1.4.1.9.9.616.1.2.30 | TruthValue | read-write | current |
| clMeshIsRapChannelSyncEnabled OBJECT-TYPE This object specifies whether mesh RAP channels list sync is allowed or not with mobility peers. A value of 'true' indicates RAP channels sync is allowed with mobility peers. A value of 'false' indicates RAP channels sync is not allowed with mobility peers. | 1.3.6.1.4.1.9.9.616.1.2.31 | TruthValue | read-write | current |
| clMeshIsBackhaulRrmEnabled OBJECT-TYPE This object specifies whether Radio Resource Management(RRM) is enabled or not in mesh backhaul radio. In Enabled state, RRM measurements are enabled for Ethernet connected Root mode Mesh APs which does not have any child Mesh Aps connected. A value of 'true' indicates RRM is enabed in Mesh backhaul radio. A value of 'false' indicates RRM is disabled in Mesh backhaul radio. | 1.3.6.1.4.1.9.9.616.1.2.32 | TruthValue | read-write | current |
| clMeshIsCacEnabled OBJECT-TYPE This object specifies whether CAC functionality is enabled on mesh backhaul radio A value of 'true' indicates CAC is enabed in Mesh backhaul radio. A value of 'false' indicates CAC is disabled in Mesh backhaul radio. | 1.3.6.1.4.1.9.9.616.1.2.33 | TruthValue | read-write | current |
| ciscoLwappMeshNeighborsStatus OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.1.3 | |||
| clMeshNeighborTable OBJECT-TYPE This table represents information about neighbors of any mesh node. Neighbor AP can be on same or different mesh sector. Any mesh node is neighbor of a mesh node, if it can detect 802.11 signals on any channels. Child or parent mesh node also considers as neighbors. | 1.3.6.1.4.1.9.9.616.1.3.1 | not-accessible | current | |
| clMeshNeighborEntry OBJECT-TYPE An (conceptual) entry in this table is created when mesh node detects neighbor mesh nodes. Entries are removed when the mesh node does not detect AP as neighbor. | 1.3.6.1.4.1.9.9.616.1.3.1.1 | not-accessible | current | |
| clMeshNeighborMacAddress OBJECT-TYPE This object represents MAC address of neighbor mesh node. | 1.3.6.1.4.1.9.9.616.1.3.1.1.1 | MacAddress | not-accessible | current |
| clMeshNeighborType OBJECT-TYPE This object represents type of neighbor mesh node. parent - Neighbor mesh node is a parent mesh node of this mesh node. neighbor - Its a neighbor mesh node. It can be on same or different mesh-sector. excluded - Neighbor mesh node is excluded by this mesh node. child - Neighbor mesh node is child of this mesh node. beacon - Neighbor mesh node found by passive scanning. Default - Neighbor mesh node connected using a mismatched bridge group name | 1.3.6.1.4.1.9.9.616.1.3.1.1.2 | Bits {parent(0), neighbor(1), excluded(2), child(3), beacon(4), default(5)} | read-only | current |
| clMeshNeighborLinkSnr OBJECT-TYPE This object represents the SNR value seen by this mesh node from neighbor mesh node. | 1.3.6.1.4.1.9.9.616.1.3.1.1.3 | Integer32 | read-only | current |
| clMeshNeighborChannel OBJECT-TYPE This object represents the channel on which neighbor mesh node is operating. | 1.3.6.1.4.1.9.9.616.1.3.1.1.4 | CLDot11Channel | read-only | current |
| clMeshNeighborUpdate OBJECT-TYPE This object represents when the neighbor table was last updated. This value is represented as a instance of sysUp time. | 1.3.6.1.4.1.9.9.616.1.3.1.1.5 | TimeStamp | read-only | current |
| clMeshAtfStatsTable OBJECT-TYPE This table represents ATF mesh stats for all the RAPs/PMAPs having one or more child mesh nodes. | 1.3.6.1.4.1.9.9.616.1.3.2 | not-accessible | current | |
| clMeshAtfStatsEntry OBJECT-TYPE An (conceptual) entry in this table is created when mesh node detects neighbor mesh nodes having the ATF enabled. Entries are removed when the mesh node does not detect AP as neighbor. | 1.3.6.1.4.1.9.9.616.1.3.2.1 | not-accessible | current | |
| clMeshAtfAirtimeUsedInstantaneous OBJECT-TYPE This object represents the instantaneous air time used. | 1.3.6.1.4.1.9.9.616.1.3.2.1.1 | Unsigned32 | read-only | current |
| clMeshAtfAirtimeUsedCumulative OBJECT-TYPE This object represents the cumulative air time used. | 1.3.6.1.4.1.9.9.616.1.3.2.1.2 | Unsigned64 | read-only | current |
| clMeshAtfFramesSentInstantaneous OBJECT-TYPE This object represents number of bytes sent to its neighbor mesh nodes. | 1.3.6.1.4.1.9.9.616.1.3.2.1.3 | Unsigned32 | read-only | current |
| clMeshAtfFramesSentCumulative OBJECT-TYPE This object represents number of bytes sent cumulative to its neighbor mesh nodes. | 1.3.6.1.4.1.9.9.616.1.3.2.1.4 | Unsigned64 | read-only | current |
| clMeshAtfFramesDroppedInstantaneous OBJECT-TYPE This object represents number of frames dropped instantaneous to its neighbor mesh nodes(parent/child). | 1.3.6.1.4.1.9.9.616.1.3.2.1.5 | Unsigned32 | read-only | current |
| clMeshAtfFramesDroppedCumulative OBJECT-TYPE This object represents number of frames dropped cumulative to its neighbor mesh nodes. | 1.3.6.1.4.1.9.9.616.1.3.2.1.6 | Unsigned64 | read-only | current |
| ciscoLwappMeshNotifControlConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.1.4 | |||
| clMeshAuthFailureNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshAuthFailure' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated. | 1.3.6.1.4.1.9.9.616.1.4.1 | TruthValue | read-write | current |
| clMeshChildExcludedParentNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshChildExcludedParent' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated. | 1.3.6.1.4.1.9.9.616.1.4.2 | TruthValue | read-write | current |
| clMeshParentChangeNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshParentChange' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated. | 1.3.6.1.4.1.9.9.616.1.4.3 | TruthValue | read-write | current |
| clMeshChildMovedNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshChildMoved' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated. | 1.3.6.1.4.1.9.9.616.1.4.4 | TruthValue | read-write | current |
| clMeshExcessiveParentChangeNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshExcessiveParentChange' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated. | 1.3.6.1.4.1.9.9.616.1.4.5 | TruthValue | read-write | current |
| clMeshPoorSNRNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshOnsetSNR' and 'ciscoLwappMeshAbateSNR' notifications. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will be not be generated. | 1.3.6.1.4.1.9.9.616.1.4.6 | TruthValue | read-write | current |
| clMeshConsoleLoginNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshConsoleLogin' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will not be generated. | 1.3.6.1.4.1.9.9.616.1.4.7 | TruthValue | read-write | current |
| clMeshDefaultBridgeGroupNameNotifEnabled OBJECT-TYPE This object specifies whether the SNMP generates the 'ciscoLwappMeshDefaultBridgeGroupName' notification. A value of 'true' indicates this notification will be generated. A value of 'false' indicates this notification will not be generated. | 1.3.6.1.4.1.9.9.616.1.4.8 | TruthValue | read-write | current |
| clMeshExcessiveHopCountNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshExcessiveHopCount' notification. A value of 'true' indicates this notification will be generated. A value of 'false' indicates this notification will not be generated. | 1.3.6.1.4.1.9.9.616.1.4.9 | TruthValue | read-write | current |
| clMeshExcessiveChildrenNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshExcessiveChildren' notification. A value of 'true' indicates this notification will be generated. A value of 'false' indicates this notification will not be generated. | 1.3.6.1.4.1.9.9.616.1.4.10 | TruthValue | read-write | current |
| clMeshHighSNRNotifEnabled OBJECT-TYPE This object specifies whether the SNMP entity generates the 'ciscoLwappMeshOnsetHighSNR' and 'ciscoLwappMeshAbateHighSNR' notifications. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will not be generated. | 1.3.6.1.4.1.9.9.616.1.4.11 | TruthValue | read-write | current |
| ciscoLwappMeshMIBNotifObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.1.5 | |||
| clMeshNodeMacAddress OBJECT-TYPE This object specifies the MAC address of a LWAPP AP. | 1.3.6.1.4.1.9.9.616.1.5.1 | MacAddress | accessible-for-notify | current |
| clMeshAuthFailureReason OBJECT-TYPE This object specifies the failure reason when a mesh node failed to authenticate through a controller to an Authentication Server. notInMacFilterList - MAC address of a mesh node is not configured in MAC filter list. securityFailure - Authentication server sent rejection for the mesh node. | 1.3.6.1.4.1.9.9.616.1.5.2 | INTEGER {notInMacFilterList(1), securityFailure(2)} | accessible-for-notify | current |
| clMeshPreviousParentMacAddress OBJECT-TYPE This object specifies the MAC address of previous parent Mesh Node. | 1.3.6.1.4.1.9.9.616.1.5.3 | MacAddress | accessible-for-notify | current |
| clMeshConsoleLoginStatus OBJECT-TYPE This object specifies the status of console login at MAP mesh node. | 1.3.6.1.4.1.9.9.616.1.5.4 | INTEGER {success(1), failure(2)} | accessible-for-notify | current |
| clMeshNodePrevTemperatureState OBJECT-TYPE This object specifies the previous temperature state of the Mesh AP. | 1.3.6.1.4.1.9.9.616.1.5.5 | SnmpAdminString | accessible-for-notify | current |
| clMeshNodeNewTemperatureState OBJECT-TYPE This object specifies the new temperature state of the Mesh AP. | 1.3.6.1.4.1.9.9.616.1.5.6 | SnmpAdminString | accessible-for-notify | current |
| ciscoLwappMeshGpsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.1.6 | |||
| clMeshGpsInfoTable OBJECT-TYPE This table represents information about location and velocity parameters received from the GPS module on the LWAPP Access Points that have joined the controller as part of a mesh network. | 1.3.6.1.4.1.9.9.616.1.6.1 | not-accessible | current | |
| clMeshGpsInfoEntry OBJECT-TYPE Each entry represents a conceptual row in this table. An entry is created when MAP joins the controller. The entry is removed when the mesh node lose their association with the controller due to loss of communication with controller or when a mesh node is reset. | 1.3.6.1.4.1.9.9.616.1.6.1.1 | not-accessible | current | |
| clMeshGpsLocationPresent OBJECT-TYPE This object indicates whether the access point has the GPS module installed or not. | 1.3.6.1.4.1.9.9.616.1.6.1.1.1 | TruthValue | read-only | deprecated |
| clMeshGpsLocationValid OBJECT-TYPE This object indicates whether the location information is valid or not. | 1.3.6.1.4.1.9.9.616.1.6.1.1.2 | TruthValue | read-only | deprecated |
| clMeshGpsLatitude OBJECT-TYPE This object represents latitude information in the GPS data received. | 1.3.6.1.4.1.9.9.616.1.6.1.1.3 | SnmpAdminString | read-only | deprecated |
| clMeshGpsLongitude OBJECT-TYPE This object represents longitude information in the GPS data received. | 1.3.6.1.4.1.9.9.616.1.6.1.1.4 | SnmpAdminString | read-only | deprecated |
| clMeshGpsAltitude OBJECT-TYPE This object represents altitude information in the GPS data received. | 1.3.6.1.4.1.9.9.616.1.6.1.1.5 | SnmpAdminString | read-only | deprecated |
| clMeshGpsCollectionTime OBJECT-TYPE This object represents the time when GPS data was collected. | 1.3.6.1.4.1.9.9.616.1.6.1.1.6 | TimeStamp | read-only | deprecated |
| ciscoLwappMeshMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.2 | |||
| ciscoLwappMeshMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.2.1 | |||
| ciscoLwappMeshMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.616.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| ciscoLwappMeshAuthFailure NOTIFICATION-TYPE This notification is generated by agent when number of failures exceeds threshold defined by object 'clMeshMeshNodeAuthFailureThreshold'. Object 'clMeshAuthFailureNotifEnabled' controls the generation of this notification. A mesh node can fail to authorize if the MAC address of mesh node is not in the MAC filter list or security failure by authentication server. Reason is specified by 'clMeshAuthFailureReason'. | 1.3.6.1.4.1.9.9.616.0.1 | current |
| ciscoLwappMeshChildExcludedParent NOTIFICATION-TYPE This notification generated by agent when child mesh node exceeds threshold limit of number of discovery response timeouts defined by object 'clMeshMeshChildAssociationFailuresThreshold'. The child mesh node will not try to associate excluded parent mesh node for the interval defined by object 'clMeshMeshChildExcludedParentInterval'. The child mesh node will remember the excluded parent MAC address and when it joins the network it will inform the controller. 'cLApName' specifies child mesh node name. Child MAC address is sent as part of index. Object 'clMeshChildExcludedParentNotifEnabled' controls the generation of this notification. | 1.3.6.1.4.1.9.9.616.0.2 | current |
| ciscoLwappMeshParentChange NOTIFICATION-TYPE This notification is generated by the agent when a child mesh node changes its parent. Child mesh node will remember its previous parent and when it joins the network it will inform controller about change of its parent. 'cLApName' specifies child mesh node name. Child mesh node MAC address is sent as part of index. Object 'clMeshParentChangeNotifEnabled' controls the generation of this notification. | 1.3.6.1.4.1.9.9.616.0.3 | current |
| ciscoLwappMeshChildMoved NOTIFICATION-TYPE This notification is generated by the agent when a parent mesh node loses connection with its child mesh node. 'cLApName' specifies parent mesh node name. Parent and child MAC address are sent as part of index. Object 'clMeshChildMovedNotifEnabled' controls the generation of this notification. | 1.3.6.1.4.1.9.9.616.0.4 | current |
| ciscoLwappMeshExcessiveParentChange NOTIFICATION-TYPE This notification is generated by the agent when a child mesh node changes its parent frequently. Each mesh node keeps count of number of parent changes in fixed time. If it exceeds the threshold defined by 'clMeshExcessiveParentChangeThreshold' then child mesh node informs the controller. 'cLApName' specifies child mesh node name. Child and Parent MAC address are sent as part of index. Object 'clMeshExcessiveParentChangeNotifEnabled' controls the generation of this notification. | 1.3.6.1.4.1.9.9.616.0.5 | current |
| ciscoLwappMeshOnsetSNR NOTIFICATION-TYPE This notification is generated by the agent when a child mesh node detects lower SNR on backhaul link then defined by object 'clMeshSNRThresholdOnset'. SNR value is checked after interval defined by object 'clMeshSNRCheckTimeInterval'. 'ciscoLwappMeshAbateSNR' notification will be sent to clear this notification. 'cLApName' specifies child mesh node name. Child and parent MAC address are sent as part of index. Object 'clMeshPoorSNRNotifEnabled' controls the generation of this notification. | 1.3.6.1.4.1.9.9.616.0.6 | current |
| ciscoLwappMeshAbateSNR NOTIFICATION-TYPE This notification is generated by the agent to clear 'ciscoLwappMeshOnsetSNR' notification when child mesh node detects SNR on backhaul link is higher then the object defined by 'clMeshSNRThresholdAbate'. SNR value is checked after interval defined by object 'clMeshSNRCheckTimeInterval'. 'cLApName' specifies child mesh node name. Child and parent MAC address are sent as part of index. Object 'clMeshPoorSNRNotifEnabled' controls the generation of this notification. | 1.3.6.1.4.1.9.9.616.0.7 | current |
| ciscoLwappMeshConsoleLogin NOTIFICATION-TYPE This notification is generated by the agent when login on MAP console is successful or failure after three attempts. 'cLApName' specifies mesh node name. Object 'clMeshConsoleLoginNotifEnabled' controls the generation of this notification. | 1.3.6.1.4.1.9.9.616.0.8 | current |
| ciscoLwappMeshDefaultBridgeGroupName NOTIFICATION-TYPE This notification is generated by the agent when MAP mesh node joins parent using 'default' bridge group name. The child node mac address is sent as the index of cLApName. | 1.3.6.1.4.1.9.9.616.0.9 | current |
| ciscoLwappMeshExcessiveHopCount NOTIFICATION-TYPE This notification is generated by the agent when the number of hops from the MAP node to the RAP exceeds the threshold defined by 'clMeshExcessiveHopCountThreshold'. The MAP MAC address is sent as part of the index. These alarms are raised once in three minutes, the periodicity of AP sending the statistics to WLC. | 1.3.6.1.4.1.9.9.616.0.10 | current |
| ciscoLwappMeshExcessiveChildren NOTIFICATION-TYPE This notification is generated by the agent when the child count exceeds clMeshExcessiveRapChildThreshold for a RAP and clMeshExcessiveMapChildThreshold for a MAP. The node MAC address is sent as a part of the index. These alarms are raised once in three minutes, the periodicity of AP sending the statistics to WLC. | 1.3.6.1.4.1.9.9.616.0.11 | current |
| ciscoLwappMeshOnsetHighSNR NOTIFICATION-TYPE This notification is generated by the agent when child mesh node detects higher SNR on backhaul link then defined by object 'clMeshHighSNRThresholdOnset'. SNR value is checked after interval defined by object 'clMeshSNRCheckTimeInterval'. 'ciscoLwappMeshAbateHighSNR' notification will be sent to clear this notification. 'cLApName' specifies child mesh node name. Child and parent MAC address are sent as part of index. Object 'clMeshHighSNRNotifEnabled' controls the generation of this notification. These alarms are raised once in three minutes, the periodicity of AP sending the statistics to WLC. | 1.3.6.1.4.1.9.9.616.0.12 | current |
| ciscoLwappMeshAbateHighSNR NOTIFICATION-TYPE This notification is generated by the agent to clear 'ciscoLwappMeshOnsetSNR' notification when child mesh node detects SNR on backhaul link, which is lower than the object defined by 'clMeshHighSNRThresholdAbate'. SNR value is checked after interval defined by object 'clMeshSNRCheckTimeInterval'. 'clMeshNeighborLinkSnr' represents the SNR value seen by this mesh node from neighbor mesh node. 'cLApName' specifies child mesh node name. Child and parent MAC address are sent as part of index. Object 'clMeshHighSNRNotifEnabled' controls the generation of this notification. | 1.3.6.1.4.1.9.9.616.0.13 | current |
| ciscoLwappMeshTemperatureStateChange NOTIFICATION-TYPE This notification is generated by the agent when there is a change occurred in the temperature state of the Mesh AP. | 1.3.6.1.4.1.9.9.616.0.14 | current |
| ciscoLwappMeshPskKeyAuthFailure NOTIFICATION-TYPE This notification is generated by the agent when mesh node fail to join to controller with PSK Key present on the Mesh AP. | 1.3.6.1.4.1.9.9.616.0.15 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoLwappMeshMIBCompliance MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappMeshMIB module. | 1.3.6.1.4.1.9.9.616.2.1.1 | deprecated |
| ciscoLwappMeshMIBComplianceR01 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappMeshMIB module.This deprecates ciscoLwappMeshMIBCompliance | 1.3.6.1.4.1.9.9.616.2.1.2 | deprecated |
| ciscoLwappMeshMIBComplianceR02 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappMeshMIB module.This deprecates ciscoLwappMeshMIBComplianceR01 | 1.3.6.1.4.1.9.9.616.2.1.3 | deprecated |
| ciscoLwappMeshMIBComplianceR03 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappMeshMIB module.This deprecates ciscoLwappMeshMIBComplianceR02 | 1.3.6.1.4.1.9.9.616.2.1.4 | deprecated |
| ciscoLwappMeshMIBComplianceR04 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappMeshMIB module.This deprecates ciscoLwappMeshMIBComplianceR03 | 1.3.6.1.4.1.9.9.616.2.1.5 | current |
| ciscoLwappMeshConfigGroup OBJECT-GROUP This collection of objects represent the global and mesh node specific configuration and monitor parameters. | 1.3.6.1.4.1.9.9.616.2.2.1 | deprecated |
| ciscoLwappMeshNeighborStatusGroup OBJECT-GROUP This collection of objects represent the neighbor status of any mesh node. | 1.3.6.1.4.1.9.9.616.2.2.2 | current |
| ciscoLwappMeshNotifControlGroup OBJECT-GROUP This collection of objects represent the flags to control the generation of notification. | 1.3.6.1.4.1.9.9.616.2.2.3 | current |
| ciscoLwappMeshNotifObjsGroup OBJECT-GROUP This collection of objects represent the information carried by the mesh network related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.616.2.2.4 | current |
| ciscoLwappMeshNotifsGroup NOTIFICATION-GROUP This collection of objects represent the mesh network related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.616.2.2.5 | current |
| ciscoLwappMeshConfigGroupSup1 OBJECT-GROUP This collection of objects represent the global and mesh node specific configuration and monitor parameters. | 1.3.6.1.4.1.9.9.616.2.2.6 | deprecated |
| ciscoLwappMeshNotifControlGroupSup1 OBJECT-GROUP This collection of objects represent the flags to control the generation of notification.This deprecates ciscoLwappMeshNotifControlGroup. | 1.3.6.1.4.1.9.9.616.2.2.7 | current |
| ciscoLwappMeshNotifsGroupSup1 NOTIFICATION-GROUP This collection of objects represent the mesh network related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.616.2.2.8 | current |
| ciscoLwappMeshConfigGroupSup2 OBJECT-GROUP This collection of objects represent the global and mesh node specific configuration and monitor parameters. | 1.3.6.1.4.1.9.9.616.2.2.9 | current |
| ciscoLwappMeshAtfStatusGroup OBJECT-GROUP This collection of objects represent the ATF stats for mesh mode APs. | 1.3.6.1.4.1.9.9.616.2.2.10 | current |
| ciscoLwappMeshConfigGroupRev3 OBJECT-GROUP This collection of objects represent the global and mesh node specific configuration and monitor parameters. | 1.3.6.1.4.1.9.9.616.2.2.11 | current |
| ciscoLwappMeshPskConfigGroup OBJECT-GROUP This collection of objects represent the PSK entries of mesh mode APs. | 1.3.6.1.4.1.9.9.616.2.2.12 | current |
| ciscoLwappMeshProfileConfigGroup OBJECT-GROUP This collection of objects represent mesh profile specific configurations. | 1.3.6.1.4.1.9.9.616.2.2.13 | deprecated |
| ciscoLwappMeshProfileConfigGroupRev1 OBJECT-GROUP This collection of objects represent mesh profile specific configurations. | 1.3.6.1.4.1.9.9.616.2.2.14 | current |