CISCO-LWAPP-QOS-MIB
- Registered at
- 1.3.6.1.4.1.9.9.524
- Last updated
- 2010-07-21 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2010-07-21 00:00, 2007-01-07 00:00, 2006-04-13 00:00
- Namespace
- cisco
- Source file
CISCO-LWAPP-QOS-MIB- Digest
sha256:ca39c9bfe91bb71c4ab9bae6afacae4d5f75b90f2e2329fd7274eccdbd85c53f
Description
This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is used to study the quality of service in the voice and video traffic on the WLAN. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC + + CC + + + + + + + +......+ +......+ +......+ .. . . .. . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + AP + + AP + + AP + + AP + + + + + + + + + +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Gratuitous Probe Response (GPR) The Gratuitous Probe Response feature aids in conserving battery power of WLAN-enabled cell phones by providing a high rate packet on the order of tens of milliseconds such that these kind of phones can wake up and wait at predefined intervals, to reduce battery power. The GPR packet is transmitted from the AP at a predefined time interval. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. TU A measurement of time in units of 1024 microseconds. User Priority ( UP ) Specifies a the priority rules in QOS for handling user priority. EDCA As defined in 802.11e standard, Enhanced distributed channel access(EDCA) parameter set element is used by the AP to establish policy, to change policy when accepting new clients, or to adapt to changes in offered load. KTS (Key Telephone System) Key Telephone System is an alternative to a private branch exchange (PBX) phone system. A KTS is equipped with several buttons that allow a caller to directly select outgoing lines or incoming calls, and use intercom and conference facilities. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
Contact
Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-LWAPP-AP-MIB | cLApDot11IfSlotId, cLApDot11IfType, cLApName, cLApSysMacAddress |
| CISCO-LWAPP-DOT11-CLIENT-MIB | cldcClientMacAddress |
| CISCO-LWAPP-WLAN-MIB | cLWlanIndex |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | TimeIntervalSec |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB CISCO-LWAPP-AP-MIB CISCO-LWAPP-DOT11-CLIENT-MIB CISCO-LWAPP-DOT11-MIB CISCO-LWAPP-MOBILITY-EXT-MIB CISCO-LWAPP-QOS-MIB CISCO-LWAPP-RF-MIB CISCO-LWAPP-TC-MIB CISCO-LWAPP-WLAN-MIB CISCO-LWAPP-WLAN-POLICY-MIB CISCO-QOS-PIB-MIB CISCO-SMI CISCO-TC ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CiscoLwappDot11aPhyRates TEXTUAL-CONVENTION This field indicates the physical rates supported by a 802.11a radio. The different physical rates (in Mbps) are 6,9, 12, 18, 24, 36, 48, 54. 11n rates: 65,72.2, 130, 135, 144.4, 150, 270, 300. | current | |||
| CiscoLwappDot11bPhyRates TEXTUAL-CONVENTION This field indicates the physical rates supported by a 802.11b radio. The different physical rates (in Mbps) are 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54. 11n rates: 65,72.2, 130, 135, 144.4, 150, 270, 300. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoLwappQosMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.0 | |||
| ciscoLwappQosMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1 | |||
| cLQd11aCACConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.1 | |||
| cLQd11aVoiceAdmCtrlSupport OBJECT-TYPE This object is used to enable or disable admission control for voice traffic flowing through the 802.11a interfaces in the controller. When set to 'true', controller will reserve and manage max-bandwidth (cLQd11aVoiceMaxAdmBandwidth) and roaming-bandwidth (cLQd11aVoiceMaxRoamBandwidth) as per user configured values. When disabled, admission control will not be enforced. This may delay voice traffic depending on load on the WLAN. | 1.3.6.1.4.1.9.9.524.1.1.1 | TruthValue | read-write | current |
| cLQd11aVoiceMaxAdmBandwidth OBJECT-TYPE This object denotes the maximum bandwidth that can be allocated by controller for voice traffic when admission control is enabled for for 802.11a interfaces in the controller. Please note that the write operation on this object will be successful only if the 802.11a network is not operational and the total value populated for this object for all the admission control attributes (voice, video) together does not exceed 100%. | 1.3.6.1.4.1.9.9.524.1.1.2 | Unsigned32 (0..100) | read-write | current |
| cLQd11aVoiceMaxRoamBandwidth OBJECT-TYPE This object represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11aVoiceMaxAdmBandwidth, that can be allocated to roaming clients for voice traffic, when admission control is enabled for 802.11a interfaces in the controller. Please note that the write operation on this object will be successful only if the 802.11a network is disabled and not operational. The value configured through this object takes effect when the 802.11a network is enabled. | 1.3.6.1.4.1.9.9.524.1.1.3 | Unsigned32 (0..100) | read-write | current |
| cLQd11aVideoAdmCtrlSupport OBJECT-TYPE This object is used to enable or disable admission control for video traffic flowing through the 802.11a interfaces in the controller. When set to 'true', controller will reserve and manage max-bandwidth (cLQd11aVideoMaxAdmBandwidth) and roaming-bandwidth (cLQd11aVideoMaxRoamBandwidth) as per user configured values. When disabled, admission control will not be enforced. This may delay video traffic depending on load on the WLAN. | 1.3.6.1.4.1.9.9.524.1.1.4 | TruthValue | read-write | current |
| cLQd11aVideoMaxAdmBandwidth OBJECT-TYPE This object denotes the maximum bandwidth that can be allocated by controller for video traffic when admission control is enabled for 802.11a interfaces in the controller. When set to 0, all available bandwidth in 802.11a interfaces can be allocated to video traffic. Please note that the write operation on this object will be successful only if the 802.11a network is not operational and the total value populated for this object for all the admission control attributes (voice, video) together does not exceed 100%. | 1.3.6.1.4.1.9.9.524.1.1.5 | Unsigned32 (0..100) | read-write | current |
| cLQd11aVideoMaxRoamBandwidth OBJECT-TYPE This object represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11aVideoMaxAdmBandwidth, that can be allocated to roaming clients for video traffic, when admission control is enabled for 802.11a interfaces in the controller. Please note that the write operation on this object will be successful only if the 802.11a network is disabled and not operational. The value configured through this object takes effect when the 802.11a network is enabled and operational. | 1.3.6.1.4.1.9.9.524.1.1.6 | Unsigned32 (0..100) | read-write | current |
| cLQd11aGprProbeInterval OBJECT-TYPE This object is used to set GPR probe interval period to be used by all 802.11a interfaces in the controller, when the radios are advertising any WLAN with GPR support enabled. Please note that the write operation on this object will be successful only if the 802.11a network is not operational. The value configured through this object takes effect when the 802.11a network is enabled and operational. | 1.3.6.1.4.1.9.9.524.1.1.7 | Unsigned32 (10..100) | read-write | current |
| cLQd11aVoiceCtrl OBJECT-TYPE When admission control is enabled these parameters can be modified. loadBased - controller will reserve and manage max-bandwidth and roaming-bandwidth based on the load on the WLAN. static - controller will reserve and manage max-bandwidth (cLQd11aVoiceMaxAdmBandwidth) and roaming-bandwidth (cLQd11aVoiceMaxRoamBandwidth) as per user configured values. When ACM is disabled, admission control will not be enforced. This may delay voice traffic depending on the traffic on the WLAN. | 1.3.6.1.4.1.9.9.524.1.1.8 | INTEGER {loadBased(1), static(2)} | read-write | current |
| cLQd11aExpeditedBw OBJECT-TYPE This object specifies if expedited BW feature is enabled or not. A value of 'true' will ensure that the APs advertise the expedited BW support in their beacons and association responses. A value of 'false' will ensure that the APs do not advertise the expedited BW support in their beacons and association responses. | 1.3.6.1.4.1.9.9.524.1.1.9 | TruthValue | read-write | current |
| cLQd11aEdcaProfile OBJECT-TYPE This object specifies the EDCA profile to be used in EDCA Parameter set element. See glossary for EDCA. wmmDefault - WMM default standard parameters. svpVoice - Spectralink voice priority parameters. optimizedVoice - parameters for voice optimization. optimizedVideoVoice - parameters for video and voice optimization. customVoice - parameters for customized voice. | 1.3.6.1.4.1.9.9.524.1.1.10 | INTEGER {wmmDefault(1), svpVoice(2), optimizedVoice(3), optimizedVideoVoice(4), customVoice(5)} | read-write | current |
| cLQd11aMacOptimization OBJECT-TYPE This object specifies MAC enhancements for voice, resulting in improvement in number of voice calls serviced per access point. A value of 'true' enables MAC optimization. A value of 'false' disables MAC optimization. | 1.3.6.1.4.1.9.9.524.1.1.11 | TruthValue | read-write | current |
| cLQd11aMaxCallLimit OBJECT-TYPE This object specifies the max number of CAC Voice Calls allowed on dot11a radio band. Value of zero denotes no limit. | 1.3.6.1.4.1.9.9.524.1.1.12 | Unsigned32 | read-write | deprecated |
| cLQd11aMcastDirectEnable OBJECT-TYPE This object denotes the decision flag to allow multicast direct stream on radio. Overrides RRC status | 1.3.6.1.4.1.9.9.524.1.1.13 | TruthValue | read-write | current |
| cLQd11aBestEffortAdmission OBJECT-TYPE This object specifies whether to admit a media stream in best effort queue | 1.3.6.1.4.1.9.9.524.1.1.14 | TruthValue | read-write | current |
| cLQd11aRedirectBestEffort OBJECT-TYPE This object specifies whether a unicast or multicast only video stream can be redirected to best effort | 1.3.6.1.4.1.9.9.524.1.1.15 | TruthValue | read-write | current |
| cLQd11aRadioMaxStreams OBJECT-TYPE This object denotes the Maximum number of allowed streams per radio for a 802.11a band | 1.3.6.1.4.1.9.9.524.1.1.16 | INTEGER (0..20) | read-write | current |
| cLQd11aMaxVideoATPercent OBJECT-TYPE This object denotes the Maximum Allowed Bandwidth for video traffic | 1.3.6.1.4.1.9.9.524.1.1.17 | INTEGER (0..85) | read-write | current |
| cLQd11aMaxVoiceATPercent OBJECT-TYPE This object denotes the Maximum Allowed Bandwidth for voice traffic | 1.3.6.1.4.1.9.9.524.1.1.18 | INTEGER (0..85) | read-write | current |
| cLQd11aMaxMediaATPercent OBJECT-TYPE This object denotes the Maximum Allowed Bandwidth for Media traffic | 1.3.6.1.4.1.9.9.524.1.1.19 | INTEGER (0..100) | read-write | current |
| cLQd11aMinPhyRate OBJECT-TYPE This object denotes that Client needs to have at least this rate enabled in order to join media stream | 1.3.6.1.4.1.9.9.524.1.1.20 | CiscoLwappDot11aPhyRates | read-write | current |
| cLQd11aClientMaxStreams OBJECT-TYPE This object denotes the Maximum number of allowed streams per client for a 802.11a band | 1.3.6.1.4.1.9.9.524.1.1.21 | INTEGER (0..20) | read-write | current |
| cLQd11aSipCacSupportEnable OBJECT-TYPE This object represents if SIP CAC is supported on dot11a radio band. A value of 'true' enables SIP CAC support on dot11a radio band. A value of 'false' disable SIP CAC support on dot11a radio band. | 1.3.6.1.4.1.9.9.524.1.1.22 | TruthValue | read-write | current |
| cLQd11aMaxRetryPercent OBJECT-TYPE This object denotes the maximum retry percent for Media traffic on dot11a radio band. | 1.3.6.1.4.1.9.9.524.1.1.23 | INTEGER (0..100) | read-write | current |
| cLQd11aVideoCtrl OBJECT-TYPE This object denotes the admission control (ACM) method used on dot11a radio band. When admission control is enabled these parameters can be modified. loadBased - controller will reserve and manage max-bandwidth and roaming-bandwidth based on the load on the WLAN. static - controller will reserve and manage max-bandwidth (cLQd11aVideoMaxAdmBandwidth) and roaming-bandwidth (cLQd11aVideoMaxRoamBandwidth) as per user configured values. When ACM is disabled, admission control will not be enforced. This may delay video traffic depending on the traffic on the WLAN. | 1.3.6.1.4.1.9.9.524.1.1.24 | INTEGER {loadBased(1), static(2)} | read-write | current |
| cLQd11aSipCacVideoEnable OBJECT-TYPE This object represents if SIP based Video-CAC is enabled on dot11a radio band. A value of 'true' enables SIP based Video-CAC on dot11a radio band. A value of 'false' disable SIP based Video-CAC on dot11a radio band. | 1.3.6.1.4.1.9.9.524.1.1.25 | TruthValue | read-write | current |
| cLQd11bCACConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.2 | |||
| cLQd11bVoiceAdmCtrlSupport OBJECT-TYPE This object is used to enable or disable admission control for voice traffic flowing through the 802.11b/g interfaces in the controller. When set to 'true', controller will reserve and manage max-bandwidth (cLQd11bVoiceMaxAdmBandwidth) and roaming-bandwidth (cLQd11bVoiceMaxRoamingBandwidth) as per user configured values. When disabled, admission control will not be enforced. This may delay voice traffic depending on load on the WLAN. | 1.3.6.1.4.1.9.9.524.1.2.1 | TruthValue | read-write | current |
| cLQd11bVoiceMaxAdmBandwidth OBJECT-TYPE This object denotes the maximum bandwidth that can be allocated by controller for voice traffic when admission control is enabled for 802.11b/g interfaces in the controller. Please note that the write operation on this object will be successful only if the 802.11b/g network is not operational and the total value populated for this object for all the admission control attributes (voice, video) together does not exceed 100%. | 1.3.6.1.4.1.9.9.524.1.2.2 | Unsigned32 (0..100) | read-write | current |
| cLQd11bVoiceMaxRoamBandwidth OBJECT-TYPE This object represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11bVoiceMaxAdmBandwidth, that can be allocated to roaming clients for voice traffic, when admission control is enabled for 802.11b interfaces in the controller. Please note that the write operation on this object will be successful only if the 802.11b/g network is not operational. The value configured through this object takes effect when the 802.11b/g network is enabled and operational. | 1.3.6.1.4.1.9.9.524.1.2.3 | Unsigned32 (0..100) | read-write | current |
| cLQd11bVideoAdmCtrlSupport OBJECT-TYPE This object is used to enable or disable admission control for video traffic flowing through the 802.11b/g interfaces in the controller. When set to 'true', controller will reserve and manage max-bandwidth (cLQd11bVideoMaxAdmBandwidth) and roaming-bandwidth (cLQd11bVideoMaxRoamBandwidth) as per user configured values. When disabled, admission control will not be enforced. This may delay video traffic depending on load on the WLAN. | 1.3.6.1.4.1.9.9.524.1.2.4 | TruthValue | read-write | current |
| cLQd11bVideoMaxAdmBandwidth OBJECT-TYPE This object denotes the maximum bandwidth that can be allocated by controller for video traffic when admission control is enabled for 802.11b/g interfaces in the controller. When set to 0, all available bandwidth in 802.11b/g interfaces can be allocated to video traffic. Please note that the write operation on this object will be successful only if the 802.11b/g network is not operational and the total value populated for this object for all the admission control attributes (voice, video) together does not exceed 100%. | 1.3.6.1.4.1.9.9.524.1.2.5 | Unsigned32 (0..100) | read-write | current |
| cLQd11bVideoMaxRoamBandwidth OBJECT-TYPE This objects represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11bVideoMaxAdmBandwidth, that can be allocated to roaming clients for video traffic, when admission control is enabled for 802.11b interfaces in the controller. Please note that the write operation on this object will be successful only if the 802.11b/g network is not operational. The value configured through this object takes effect when the 802.11b/g network is enabled and operational. | 1.3.6.1.4.1.9.9.524.1.2.6 | Unsigned32 (0..100) | read-write | current |
| cLQd11bGprProbeInterval OBJECT-TYPE This object is used to set GPR probe interval period to be used by all 802.11b/g interfaces in the controller, when the radios are advertising any WLAN with GPR support enabled. Please note that the write operation on this object will be successful only if the 802.11b/g network is not operational. The value configured through this object takes effect when the 802.11b/g network is enabled. | 1.3.6.1.4.1.9.9.524.1.2.7 | Unsigned32 (10..100) | read-write | current |
| cLQd11bVoiceCtrl OBJECT-TYPE When admission control is enabled these parameters can be modified. loadBased - controller will reserve and manage max-bandwidth and roaming-bandwidth based on the load on the WLAN. static - controller will reserve and manage max-bandwidth (cLQd11bVoiceMaxAdmBandwidth) and roaming-bandwidth (cLQd11bVoiceMaxRoamBandwidth) as per user configured values. When ACM is disabled, admission control will not be enforced. This may delay voice traffic depending on the traffic on the WLAN. | 1.3.6.1.4.1.9.9.524.1.2.8 | INTEGER {loadBased(1), static(2)} | read-write | current |
| cLQd11bExpeditedBw OBJECT-TYPE This object specifies if expedited BW feature is enabled or not. A value of 'true' will ensure that the APs advertise the expedited BW support in their beacons and association responses. A value of 'false' will ensure that the APs do not advertise the expedited BW support in their beacons and association responses. | 1.3.6.1.4.1.9.9.524.1.2.9 | TruthValue | read-write | current |
| cLQd11bEdcaProfile OBJECT-TYPE This object specifies the EDCA profile to be used in EDCA Parameter set element. See glossary for EDCA. wmmDefault - WMM default standard parameters. svpVoice - Spectralink voice priority parameters. optimizedVoice - parameters for voice optimization. optimizedVideoVoice - parameters for video and voice optimization. customVoice - parameters for customized voice. | 1.3.6.1.4.1.9.9.524.1.2.10 | INTEGER {wmmDefault(1), svpVoice(2), optimizedVoice(3), optimizedVideoVoice(4), customVoice(5)} | read-write | current |
| cLQd11bMacOptimization OBJECT-TYPE This object specifies MAC enhancements for voice, resulting in improvement in number of voice calls serviced per access point. A value of 'true' enables MAC optimization. A value of 'false' disables MAC optimization. | 1.3.6.1.4.1.9.9.524.1.2.11 | TruthValue | read-write | current |
| cLQd11bMaxCallLimit OBJECT-TYPE This object specifies the max number of CAC Voice Calls allowed on dot11b radio band. Value of zero denotes no limit. | 1.3.6.1.4.1.9.9.524.1.2.12 | Unsigned32 | read-write | deprecated |
| cLQd11bMcastDirectEnable OBJECT-TYPE This object denotes the decision flag to allow multicast direct stream on radio. This overrides Resource Reservation Control status | 1.3.6.1.4.1.9.9.524.1.2.13 | TruthValue | read-write | current |
| cLQd11bBestEffortAdmission OBJECT-TYPE This object specifies whether to admit a media stream in best effort queue | 1.3.6.1.4.1.9.9.524.1.2.14 | TruthValue | read-write | current |
| cLQd11bRedirectBestEffort OBJECT-TYPE This object specifies whether a unicast or multicast only video stream can be redirected to best effort | 1.3.6.1.4.1.9.9.524.1.2.15 | TruthValue | read-write | current |
| cLQd11bRadioMaxStreams OBJECT-TYPE This object denotes the Maximum number of allowed streams per radio for a 802.11b band | 1.3.6.1.4.1.9.9.524.1.2.16 | INTEGER (0..20) | read-write | current |
| cLQd11bMaxVideoATPercent OBJECT-TYPE This object denotes the Maximum Allowed Bandwidth for video traffic | 1.3.6.1.4.1.9.9.524.1.2.17 | INTEGER (0..85) | read-write | current |
| cLQd11bMaxVoiceATPercent OBJECT-TYPE This object denotes the Maximum Allowed Bandwidth for voice traffic | 1.3.6.1.4.1.9.9.524.1.2.18 | INTEGER (0..85) | read-write | current |
| cLQd11bMaxMediaATPercent OBJECT-TYPE This object denotes the Maximum Allowed Bandwidth for Media traffic | 1.3.6.1.4.1.9.9.524.1.2.19 | INTEGER (0..100) | read-write | current |
| cLQd11bMinPhyRate OBJECT-TYPE This object denotes that Client needs to have at least this rate enabled in order to join media stream | 1.3.6.1.4.1.9.9.524.1.2.20 | CiscoLwappDot11bPhyRates | read-write | current |
| cLQd11bClientMaxStreams OBJECT-TYPE This object denotes the Maximum number of allowed streams per client for a 802.11b band | 1.3.6.1.4.1.9.9.524.1.2.21 | INTEGER (0..20) | read-write | current |
| cLQd11bSipCacSupportEnable OBJECT-TYPE This object represents if SIP CAC is supported on dot11b radio band. A value of 'true' enables SIP CAC support on dot11b radio band. A value of 'false' disable SIP CAC support on dot11b radio band. | 1.3.6.1.4.1.9.9.524.1.2.22 | TruthValue | read-write | current |
| cLQd11bMaxRetryPercent OBJECT-TYPE This object denotes the maximum retry percent for Media traffic on dot11b radio band. | 1.3.6.1.4.1.9.9.524.1.2.23 | INTEGER (0..100) | read-write | current |
| cLQd11bVideoCtrl OBJECT-TYPE This object denotes the admission control (ACM) method used on dot11a radio band. When admission control is enabled these parameters can be modified. loadBased - controller will reserve and manage max-bandwidth and roaming-bandwidth based on the load on the WLAN. static - controller will reserve and manage max-bandwidth (cLQd11aVoiceMaxAdmBandwidth) and roaming-bandwidth (cLQd11aVoiceMaxRoamBandwidth) as per user configured values. When ACM is disabled, admission control will not be enforced. This may delay video traffic depending on the traffic on the WLAN. | 1.3.6.1.4.1.9.9.524.1.2.24 | INTEGER {loadBased(1), static(2)} | read-write | current |
| cLQd11bSipCacVideoEnable OBJECT-TYPE This object represents if SIP based Video-CAC is enabled on dot11a radio band. A value of 'true' enables SIP based Video-CAC on dot11a radio band. A value of 'false' disable SIP based Video-CAC on dot11a radio band. | 1.3.6.1.4.1.9.9.524.1.2.25 | TruthValue | read-write | current |
| cLQd11GprConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.3 | |||
| cLQd11GprTable OBJECT-TYPE This table populates the GPR configuration on the WLANs configured on this controller. There exists a row in this table for each WLAN configured through cLWlanConfigTable. A row is added is to this table by the agent when a WLAN is created by the user through an explicit management action initiated from a network management station. Similarly a row gets deleted automatically when the user deletes the particular WLAN. | 1.3.6.1.4.1.9.9.524.1.3.1 | not-accessible | current | |
| cLQd11GprEntry OBJECT-TYPE Each entry represents a conceptual row in cLQd11GprTable and corresponds to the GPR configuration on a WLAN. | 1.3.6.1.4.1.9.9.524.1.3.1.1 | not-accessible | current | |
| cLQd11GprSupport OBJECT-TYPE If 'true', then the corresponding radios that advertise this WLAN, will send Gratuitous Probe Response. If 'false', then the corresponding radios that advertise this WLAN, will not send Gratuitous Probe Response. | 1.3.6.1.4.1.9.9.524.1.3.1.1.1 | TruthValue | read-write | current |
| cLQd11CACStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.4 | |||
| cLQd11CACStatsTable OBJECT-TYPE This table populates the call admission control metrics collected by observing the voice or video traffic on the dot11 interface of a particular AP. There exists a row in this table for each row corresponding to a dot11 interface found in cLApDot11IfTable. A row corresponding to a dot11 interface is added when an AP joins the controller. The row gets deleted when the AP dissociates from the controller. | 1.3.6.1.4.1.9.9.524.1.4.1 | not-accessible | current | |
| cLQd11CACStatsEntry OBJECT-TYPE Each entry represents a conceptual row in CLQd11CACStatsTable and corresponds to the admission control statistics for a particular dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1 | not-accessible | current | |
| cLQd11CacVoiceBwInUse OBJECT-TYPE This object indicates the voice bandwidth in use as a percentage of the bandwidth configured through cLQd11aVoiceMaxAdmBandwidth or cLQd11bVoiceMaxAdmBandwidth, depending on the type of this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.1 | Gauge32 (0..100) | read-only | current |
| cLQd11CacVideoBwInUse OBJECT-TYPE This object indicates the video bandwidth in use as a percentage of the bandwidth configured through cLQd11aVideoMaxAdmBandwidth or cLQd11bVideoMaxAdmBandwidth, depending on the type of this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.2 | Gauge32 (0..100) | read-only | current |
| cLQd11CacVoiceCallsInProgress OBJECT-TYPE This object indicates the count of the number of voice calls currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.3 | Gauge32 | read-only | current |
| cLQd11CacRoamVoiceCallsInProg OBJECT-TYPE This object indicates the count of the number of voice calls initiated from roaming clients currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.4 | Gauge32 | read-only | current |
| cLQd11CacTotalVoiceCallsAP OBJECT-TYPE This object indicates the count of the number of voice calls observed on this dot11 interface ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.5 | Counter32 | read-only | current |
| cLQd11CacTotalRoamCallsAP OBJECT-TYPE This object indicates the count of the number of voice and video calls initiated from roaming clients observed on this dot11 interface ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.6 | Counter32 | read-only | current |
| cLQd11CacVoiceCallsRejectedAP OBJECT-TYPE This object indicates the count of the number of voice calls observed as rejected on this dot11 interface, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.7 | Counter32 | read-only | current |
| cLQd11CacRoamCallsRejectedAP OBJECT-TYPE This object indicates the count of the number of voice and video calls initiated from roaming clients observed as rejected on this dot11 interface, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.8 | Counter32 | read-only | current |
| cLQd11CacRejCallsInsufBw OBJECT-TYPE This object indicates the count of the number of calls observed as rejected on this dot11 interface due to insufficient bandwidth, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.9 | Counter32 | read-only | current |
| cLQd11CacRejCallsBadParams OBJECT-TYPE This object indicates the count of the number of calls observed as rejected on this dot11 interface due to mismatch in call parameters, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.10 | Counter32 | read-only | current |
| cLQd11CacRejCallsPhyRate OBJECT-TYPE This object indicates the count of the number of calls observed as rejected on this dot11 interface due to mismatch in 802.11 data rates, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.11 | Counter32 | read-only | current |
| cLQd11CacRejCallsQosPolicy OBJECT-TYPE This object indicates the count of the number of calls observed as rejected on this dot11 interface due to restrictions imposed by QOS policies, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.12 | Counter32 | read-only | current |
| cLQd11SipCacNonRoamCallsInProgress OBJECT-TYPE This object indicates the number of non-roaming SIP calls currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.13 | Gauge32 | read-only | current |
| cLQd11SipCacRoamCallsInProg OBJECT-TYPE This object indicates the number of SIP calls initiated from roaming clients currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.14 | Gauge32 | read-only | current |
| cLQd11SipCacTotalNonRoamCallsAP OBJECT-TYPE This object indicates the number of non-roaming SIP calls observed on this dot11 interface since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.15 | Counter32 | read-only | current |
| cLQd11SipCacTotalRoamCallsAP OBJECT-TYPE This object indicates the number of SIP calls initiated from roaming clients observed on this dot11 interface ever this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.16 | Counter32 | read-only | current |
| cLQd11SipCacNonRoamCallsRejectedInSuffBw OBJECT-TYPE This object indicates the number of non-roaming SIP calls observed as rejected on this dot11 interface due to insufficient bandwidth, since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.17 | Counter32 | read-only | current |
| cLQd11SipCacRoamCallsRejectedInSuffBw OBJECT-TYPE This object indicates the number of SIP calls initiated from roaming clients observed as rejected on this dot11 interface due to insufficient bandwidth, since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.18 | Counter32 | read-only | current |
| cLQd11SipCacNonRoamCallsRejectedMaxLimit OBJECT-TYPE This object indicates the number of non-roaming SIP calls observed as rejected on this dot11 interface due to maximum limit exceeded, since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.19 | Counter32 | read-only | current |
| cLQd11SipCacRoamCallsRejectedMaxLimit OBJECT-TYPE This object indicates the number of roaming SIP calls observed as rejected on this dot11 interface due to maximum limit exceeded, since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.20 | Counter32 | read-only | current |
| cLQd11SipCacRejCallsQosPolicy OBJECT-TYPE This object indicates the number of SIP calls observed as rejected on this dot11 interface due to restrictions imposed by QOS policies, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.21 | Counter32 | read-only | deprecated |
| cLQd11SipCacPreferredCallsReceived OBJECT-TYPE This object indicates the count of the number of Preferred calls observed as received on this dot11 interface due to restrictions imposed by QOS policies, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.22 | Counter32 | read-only | current |
| cLQd11SipCacPreferredCallsAccepted OBJECT-TYPE This object indicates the count of the number of Preferred calls observed as accepted on this dot11 interface due to restrictions imposed by QOS policies, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.23 | Counter32 | read-only | current |
| cLQd11KtsCacNonRoamCallsInProgress OBJECT-TYPE This object indicates the number of non-roaming KTS calls currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.24 | Gauge32 | read-only | current |
| cLQd11KtsCacRoamCallsInProg OBJECT-TYPE This object indicates the number of KTS calls initiated from roaming clients currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.25 | Gauge32 | read-only | current |
| cLQd11KtsCacTotalNonRoamCallsAP OBJECT-TYPE This object indicates the number of non-roaming KTS calls observed on this dot11 interface since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.26 | Counter32 | read-only | current |
| cLQd11KtsCacTotalRoamCallsAP OBJECT-TYPE This object indicates the number of KTS calls initiated from roaming clients observed on this dot11 interface ever this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.27 | Counter32 | read-only | current |
| cLQd11KtsCacNonRoamCallsRejectedInSuffBw OBJECT-TYPE This object indicates the number of non-roaming KTS calls observed as rejected on this dot11 interface due to insufficient bandwidth, since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.28 | Counter32 | read-only | current |
| cLQd11KtsCacRoamCallsRejectedInSuffBw OBJECT-TYPE This object indicates the number of KTS calls initiated from roaming clients observed as rejected on this dot11 interface due to insufficient bandwidth, since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.29 | Counter32 | read-only | current |
| cLQd11CacVideoRoamBwInUse OBJECT-TYPE This object indicates the video roaming bandwidth in use as a percentage of the bandwidth configured through cLQd11aVideoMaxRoamBandwidth or cLQd11bVideoMaxRoamBandwidth, depending on the type of this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.30 | Gauge32 (0..100) | read-only | current |
| cLQd11CacVideoTotalBwInUse OBJECT-TYPE This object indicates the total video bandwidth in use. | 1.3.6.1.4.1.9.9.524.1.4.1.1.31 | Gauge32 (0..100) | read-only | current |
| cLQd11CacVideoCallsInProgress OBJECT-TYPE This object indicates the count of the number of video calls currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.32 | Gauge32 | read-only | current |
| cLQd11CacVideoRoamCallsInProg OBJECT-TYPE This object indicates the count of the number of video calls initiated from roaming clients currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.33 | Gauge32 | read-only | current |
| cLQd11CacVideoTotalCallsAP OBJECT-TYPE This object indicates the count of the number of video calls observed on this dot11 interface ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.34 | Counter32 | read-only | current |
| cLQd11CacVideoTotalRoamCallsAP OBJECT-TYPE This object indicates the count of the number of video calls initiated from roaming clients observed on this dot11 interface ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.35 | Counter32 | read-only | current |
| cLQd11CacVideoCallsRejectedAP OBJECT-TYPE This object indicates the count of the number of video calls observed as rejected on this dot11 interface, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.36 | Counter32 | read-only | current |
| cLQd11CacVideoRoamCallsRejectedAP OBJECT-TYPE This object indicates the count of the number of video calls initiated from roaming clients observed as rejected on this dot11 interface, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.37 | Counter32 | read-only | current |
| cLQd11CacVideoRejCallsInsufBw OBJECT-TYPE This object indicates the count of the number of video calls observed as rejected on this dot11 interface due to insufficient bandwidth, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.38 | Counter32 | read-only | current |
| cLQd11CacVideoRejCallsBadParams OBJECT-TYPE This object indicates the count of the number of video calls observed as rejected on this dot11 interface due to mismatch in call parameters, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.39 | Counter32 | read-only | current |
| cLQd11CacVideoRejCallsPhyRate OBJECT-TYPE This object indicates the count of the number of video calls observed as rejected on this dot11 interface due to mismatch in 802.11 data rates, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.40 | Counter32 | read-only | current |
| cLQd11CacVideoRejCallsQosPolicy OBJECT-TYPE This object indicates the count of the number of video calls observed as rejected on this dot11 interface due to restrictions imposed by QOS policies, ever since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.41 | Counter32 | read-only | current |
| cLQd11SipCacVideoCallsInProgress OBJECT-TYPE This object indicates the number of non-roaming SIP video calls currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.42 | Gauge32 | read-only | current |
| cLQd11SipCacVideoRoamCallsInProg OBJECT-TYPE This object indicates the number of SIP video calls initiated from roaming clients currently in progress on this dot11 interface. | 1.3.6.1.4.1.9.9.524.1.4.1.1.43 | Gauge32 | read-only | current |
| cLQd11SipCacVideoTotalCallsAP OBJECT-TYPE This object indicates the number of non-roaming SIP video calls observed on this dot11 interface since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.44 | Counter32 | read-only | current |
| cLQd11SipCacVideoTotalRoamCallsAP OBJECT-TYPE This object indicates the number of SIP video calls initiated from roaming clients observed on this dot11 interface ever this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.45 | Counter32 | read-only | current |
| cLQd11SipCacVideoCallsRejectedInSuffBw OBJECT-TYPE This object indicates the number of non-roaming SIP video calls observed as rejected on this dot11 interface due to insufficient bandwidth, since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.46 | Counter32 | read-only | current |
| cLQd11SipCacVideoRoamCallsRejectedInSuffBw OBJECT-TYPE This object indicates the number of SIP video calls initiated from roaming clients observed as rejected on this dot11 interface due to insufficient bandwidth, since this AP has joined the controller. | 1.3.6.1.4.1.9.9.524.1.4.1.1.47 | Counter32 | read-only | current |
| cLQEntConfConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.5 | |||
| cLQd11VoiceStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.6 | |||
| cLQd11VoiceStatsTable OBJECT-TYPE This table represents the voice statistics calculated for each radio on an AP. An entry is automatically added by the controller when a voice call is successfully placed. Entry is deleted when AP disassociates the Controller. | 1.3.6.1.4.1.9.9.524.1.6.1 | not-accessible | current | |
| cLQd11VoiceStatsEntry OBJECT-TYPE Each entry in this table provides voice related statistics for each radio on an AP. Entries are removed when the AP disassociates the controller. | 1.3.6.1.4.1.9.9.524.1.6.1.1 | not-accessible | current | |
| cLQd11VoiceCallCounts OBJECT-TYPE This object indicates cumulative number of successful VOIP calls placed using this radio. | 1.3.6.1.4.1.9.9.524.1.6.1.1.1 | Counter32 | read-only | current |
| cLQd11CacVoiceCallTimePeriod OBJECT-TYPE This object indicates cumulative call proceed time in seconds. | 1.3.6.1.4.1.9.9.524.1.6.1.1.2 | TimeIntervalSec | read-only | current |
| cLQVoiceWlanConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.7 | |||
| cLQVoiceWlanConfigTable OBJECT-TYPE This table contains per WLAN voice related configuration. There is a row in this table for every WLAN configured through cLWlanConfigTable. A row is added to this table by the agent when a WLAN is created by the user through an explicit management action initiated from a network management station. Similarly a row gets deleted automatically when the user deletes the particular WLAN. | 1.3.6.1.4.1.9.9.524.1.7.1 | not-accessible | current | |
| cLQVoiceWlanConfigEntry OBJECT-TYPE An entry containing information about voice configuration for a particular WLAN. | 1.3.6.1.4.1.9.9.524.1.7.1.1 | not-accessible | current | |
| cLQVoiceWlanConfigDetectVoipCallFailure OBJECT-TYPE If 'true', then the corresponding radios that advertise this WLAN, will snoop voice packets to detect call failure and report by sending trap. If 'false', then the corresponding radios that advertise this WLAN, will not detect call failure and hence will not send trap. | 1.3.6.1.4.1.9.9.524.1.7.1.1.1 | TruthValue | read-write | current |
| cLQVoiceClient OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.8 | |||
| cLQVoiceClientTable OBJECT-TYPE This table contains voice related client properties. There exists a row in this table for each associated voice clients. A row is added to this table by the agent when a voice client gets associated. Similarly, a row gets deleted automatically when the voice client gets disassociated. | 1.3.6.1.4.1.9.9.524.1.8.1 | not-accessible | current | |
| cLQVoiceClientEntry OBJECT-TYPE An entry containing voice call management information for a particular client. | 1.3.6.1.4.1.9.9.524.1.8.1.1 | not-accessible | current | |
| cLQVoiceClientCallingNumber OBJECT-TYPE This object indicates calling number of this voice client | 1.3.6.1.4.1.9.9.524.1.8.1.1.1 | SnmpAdminString | read-only | current |
| cLQVoiceClientLastCalledNumber OBJECT-TYPE This object indicates last called number from this voice client | 1.3.6.1.4.1.9.9.524.1.8.1.1.2 | SnmpAdminString | read-only | current |
| cLQVoiceClientLastCallFailureReasonCode OBJECT-TYPE This object represents last VOIP failue reason code of this voice client. These reason codes are taken from SIP standards. unknown - Unknown error normalFailure - Call failed for insufficient bandwidth roamFailure - SIP call failed during roaming maxLimitExceeded - Maximum SIP call permissible limit was exceeded. sipPrefCallNoBw - SIP Preferred call failed for insufficient bandwidth badRequest - The request could not be understood due to malformed syntax. unathorized - The request requires user authentication. paymentRequired - Reserved for future. forbidden - The server understood the request, but is refusing to fulfill it. notFound - The server has definitive information that the user does not exist at the domain specified in the Request-URI. methodNotallowed - The method specified in the Request-Line is understood, but not allowed for the address identified by the Request-URI. notAcceptable - The resource identified by the request is only capable of generating response entities that have content characteristics not acceptable according to the Accept header field sent in the request. proxyAuthenticationRequired - This code is similar to 401 (Unauthorized), but indicates that the client MUST first authenticate itself with the proxy. requestTimeout - The server could not produce a response within a suitable amount of time, for example, if it could not determine the location of the user in time. conflict - This is used to indicate that the request could not be completed due to a conflict with the current state of the resource. gone - The requested resource is no longer available at the server and no forwarding address is known. lengthRequired - The server is refusing to process a request because the request entity-body is larger than the server is willing or able to process. requestEntityTooLarge - The server is refusing to process a request because the request entity-body is larger than the server is willing or able to process. requestURITooLarge - The server is refusing to service the request because the Request-URI is longer than the server is willing to interpret. unsupportedMediaType - The server is refusing to service the request because the message body of the request is in a format not supported by the server for the requested method. badExtension - The server did not understand the protocol extension specified in a Proxy-Require or Require header field. temporarilyNotAvailable - The callee's end system was contacted successfully but the callee is currently unavailable. callLegDoesNotExist - This status indicates that the UAS received a request that does not match any existing dialog or transaction. loopDetected - The server has detected a loop. tooManyHops - The server received a request that contains a Max-Forwards header field with the value zero. addressIncomplete - The server received a request with a Request-URI that was incomplete. ambiguous - The Request-URI was ambiguous. busy - The callee's end system was contacted successfully, but the callee is currently not willing or able to take additional calls at this end system. internalServerError - The server encountered an unexpected condition that prevented it from fulfilling the request. notImplemented - The server does not support the functionality required to fulfill the request. badGateway - The server, while acting as a gateway or proxy, received an invalid response from the downstream server it accessed in attempting to fulfill the request. serviceUnavailable - The server is temporarily unable to process the request due to a temporary overloading or maintenance of the server. serverTimeout - The server did not receive a timely response from an external server it accessed in attempting to process the request. versionNotSupported - The server does not support, or refuses to support, the SIP protocol version that was used in the request. busyEverywhere - The callee's end system was contacted successfully but the callee is busy and does not wish to take the call at this time. decline - The callee's machine was successfully contacted but the user explicitly does not wish to or cannot participate. doesNotExistAnywhere - The server has authoritative information that the user indicated in the Request-URI does not exist anywhere. sessionNotAcceptable - The user's agent was contacted successfully but some aspects of the session description such as the requested media, bandwidth, or addressing style were not acceptable. | 1.3.6.1.4.1.9.9.524.1.8.1.1.3 | INTEGER {unknown(1), normalFailure(2), roamFailure(3), maxLimitExceeded(4), sipPrefCallNoBw(5), badRequest(400), unathorized(401), paymentRequired(402), forbidden(403), notFound(404), methodNotallowed(405), notAcceptable(406), proxyAuthenticationRequired(407), requestTimeout(408), conflict(409), gone(410), lengthRequired(411), requestEntityTooLarge(413), requestURITooLarge(414), unsupportedMdediaType(415), badExtension(420), temporarilyNotAvailable(480), callLegDoesNotExist(481), loopDetected(482), tooManyHops(483), addressIncomplete(484), ambiguous(485), busy(486), internalServerError(500), notImplemented(501), badGateway(502), serviceUnavailable(503), serverTimeout(504), versionNotSupported(505), busyEverywhere(600), decline(603), doesNotExistAnywhere(604), sessionNotAcceptable(606)} | read-only | current |
| cLQMediaClient OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.9 | |||
| cLQMediaClientTable OBJECT-TYPE This table represents Media related client properties. There exists a row in this table for each associated Media clients. A row is added to this table by the agent when a client gets associated Similarly a row gets deleted automatically when the client gets disassociated. | 1.3.6.1.4.1.9.9.524.1.9.1 | not-accessible | current | |
| cLQMediaClientEntry OBJECT-TYPE Each entry represents a conceptual row in cLQMediaClientTable and corresponds to Media properties of client. | 1.3.6.1.4.1.9.9.524.1.9.1.1 | not-accessible | current | |
| cLQVMediaClientDestIpAddrType OBJECT-TYPE This object represents Multicast destination IP address type. | 1.3.6.1.4.1.9.9.524.1.9.1.1.1 | InetAddressType | not-accessible | current |
| cLQVMediaClientDestIpAddr OBJECT-TYPE This object represents Multicast destination IP address. | 1.3.6.1.4.1.9.9.524.1.9.1.1.2 | InetAddress | not-accessible | current |
| cLQVMediaClientSrcIpAddrType OBJECT-TYPE This object represents Multicast Source IP address type. | 1.3.6.1.4.1.9.9.524.1.9.1.1.3 | InetAddressType | read-only | current |
| cLQVMediaClientSrcIpAddr OBJECT-TYPE This object represents Multicast Source IP address. | 1.3.6.1.4.1.9.9.524.1.9.1.1.4 | InetAddress | read-only | current |
| cLQVMediaClientApMacAddress OBJECT-TYPE This object specifies the MAC address of the AP for this entry. | 1.3.6.1.4.1.9.9.524.1.9.1.1.5 | MacAddress | read-only | current |
| cLQVMediaClientWlanIndex OBJECT-TYPE This object uniquely identifies one instance of a WLAN on the controller. The value 513-517 indicates wired clients. | 1.3.6.1.4.1.9.9.524.1.9.1.1.6 | Unsigned32 | read-only | current |
| cLQVMediaClientRadioType OBJECT-TYPE This object denotes client radio type. | 1.3.6.1.4.1.9.9.524.1.9.1.1.7 | INTEGER {radio80211bg(1), radio80211a(2)} | read-only | current |
| cLQVMediaClientQos OBJECT-TYPE This object represents client QOS. | 1.3.6.1.4.1.9.9.524.1.9.1.1.8 | INTEGER {besteffort(1), background(2), undefined(3), excellenteffort(4), ctrlload(5), video(6), voice(7), network(8)} | read-only | current |
| cLQVMediaClientDecision OBJECT-TYPE This object represents the policy of this Media client. | 1.3.6.1.4.1.9.9.524.1.9.1.1.9 | INTEGER {deny(1), admit(2), badClientDeny(3), badClientDemote(4)} | read-only | current |
| cLQMediaClientHistoryTable OBJECT-TYPE This table represents Media related client properties. | 1.3.6.1.4.1.9.9.524.1.9.2 | not-accessible | current | |
| cLQMediaClientHistoryEntry OBJECT-TYPE Each entry represents a conceptual row in cLQMediaClientHistoryTable and corresponds to Media properties of client. | 1.3.6.1.4.1.9.9.524.1.9.2.1 | not-accessible | current | |
| cLQVMediaClientHistTimeStamp OBJECT-TYPE This object uniquely identifies one instance of the timestamp in history for which the client admit/deny happens | 1.3.6.1.4.1.9.9.524.1.9.2.1.1 | TimeStamp | not-accessible | current |
| cLQVMediaClientHistClientMacAddress OBJECT-TYPE This object specifies the MAC address of the client for this entry. | 1.3.6.1.4.1.9.9.524.1.9.2.1.2 | MacAddress | read-only | current |
| cLQVMediaClientHistApMacAddress OBJECT-TYPE This object specifies the MAC address of the AP for this entry. | 1.3.6.1.4.1.9.9.524.1.9.2.1.3 | MacAddress | read-only | current |
| cLQVMediaClientHistSlotId OBJECT-TYPE This object uniquely identifies the slot id. | 1.3.6.1.4.1.9.9.524.1.9.2.1.4 | Unsigned32 | read-only | current |
| cLQVMediaClientHistSrcIpAddr OBJECT-TYPE This object represents Multicast source IP address. | 1.3.6.1.4.1.9.9.524.1.9.2.1.5 | IpAddress | read-only | deprecated |
| cLQVMediaClientHistDestIpAddr OBJECT-TYPE This object represents Multicast destication IP address. | 1.3.6.1.4.1.9.9.524.1.9.2.1.6 | IpAddress | read-only | deprecated |
| cLQVMediaClientHistDecision OBJECT-TYPE This object represents the policy of this Media client. | 1.3.6.1.4.1.9.9.524.1.9.2.1.7 | INTEGER {deny(1), admit(2), badClientDeny(3), badClientDemote(4)} | read-only | current |
| cLQVMediaClientHistLastFailureReasonCode OBJECT-TYPE This object represents last failue reason code of this Media client. enoughBw(1) - Radio can handle additional client traffic. Hence, allowing client admission during RRC admission or Re-RRC phase. notEnoughBw(2) - Radio cannot handle additional client traffic. Thus it will delist(put into best effort queue) or deny client. bwViolation(3) - After Re-RRC calculations, it is determined that client has done stream config violation. Thus, it will be delisted or denied. radioOverSubscribe(4) - client will be denied when when radio resources are fully utilized. badClientLink(5) - If client traffic is sent at lower data rate or number of retries exceed threshold, it will be classified as bad client. policyNotAllowed(6) - Client subscription has violated policy configured. otherErrors(7) - During RRC admission or Re-RRC phase, client joining is denied because of abnormal conditions, such as not able to retrieve client data for calculation. clientDemote(8) - During Re-RRC calculation, client is demoted to best-effort queue because the radio is too busy. clientTimeout(9) - Client is considered for timeout and removed from databse when no stream update for the client is available before the timer (15mins by default) expires. clientLeave(10) - Client leaves the stream in normal condition. | 1.3.6.1.4.1.9.9.524.1.9.2.1.8 | INTEGER {enoughBw(1), notEnoughBw(2), bwViolation(3), radioOverSubscribe(4), badClientLink(5), policyNotAllowed(6), otherErrors(7), clientDemote(8), clientTimeout(9), clientLeave(10)} | read-only | current |
| cLQVMediaClientHistWlanIndex OBJECT-TYPE This object uniquely identifies one instance of a WLAN on the controller. The value 513-517 indicates wired clients. | 1.3.6.1.4.1.9.9.524.1.9.2.1.9 | Unsigned32 (1..517) | read-only | current |
| cLQVMediaClientHistRadioType OBJECT-TYPE This object denotes client radio type. | 1.3.6.1.4.1.9.9.524.1.9.2.1.10 | INTEGER {radio80211bg(1), radio80211a(2)} | read-only | current |
| cLQVMediaClientHistQos OBJECT-TYPE This object represents client QOS. | 1.3.6.1.4.1.9.9.524.1.9.2.1.11 | INTEGER {besteffort(1), background(2), undefined(3), excellenteffort(4), ctrlload(5), video(6), voice(7), network(8)} | read-only | current |
| cLQVMediaClientHistCfgBw OBJECT-TYPE This object uniquely identifies the configured Stream Bandwidth | 1.3.6.1.4.1.9.9.524.1.9.2.1.12 | Unsigned32 | read-only | current |
| cLQVMediaClientHistCurrentRate OBJECT-TYPE This object uniquely identifies the current rate. | 1.3.6.1.4.1.9.9.524.1.9.2.1.13 | Unsigned32 | read-only | current |
| cLQVMediaClientHistVideoPktSize OBJECT-TYPE This object uniquely identifies the video packet size. | 1.3.6.1.4.1.9.9.524.1.9.2.1.14 | Unsigned32 | read-only | current |
| cLQVMediaClientHistVideoUtil OBJECT-TYPE This object uniquely identifies the Video Util. | 1.3.6.1.4.1.9.9.524.1.9.2.1.15 | Unsigned32 | read-only | current |
| cLQVMediaClientHistVoiceUtil OBJECT-TYPE This object uniquely identifies the voice util. | 1.3.6.1.4.1.9.9.524.1.9.2.1.16 | Unsigned32 | read-only | current |
| cLQVMediaClientHistChannelUtil OBJECT-TYPE This object uniquely identifies the channel util. | 1.3.6.1.4.1.9.9.524.1.9.2.1.17 | Unsigned32 | read-only | current |
| cLQVMediaClientHistQueueUtil OBJECT-TYPE This object uniquely identifies the queue util | 1.3.6.1.4.1.9.9.524.1.9.2.1.18 | Unsigned32 | read-only | current |
| cLQVMediaClientHistVideoPps OBJECT-TYPE This object uniquely identifies the Video Pps. | 1.3.6.1.4.1.9.9.524.1.9.2.1.19 | Unsigned32 | read-only | current |
| cLQVMediaClientHistVideoDelay OBJECT-TYPE This object uniquely identifies the Video delay severe. | 1.3.6.1.4.1.9.9.524.1.9.2.1.20 | Unsigned32 | read-only | current |
| cLQVMediaClientHistPktLossDiscard OBJECT-TYPE This object uniquely identifies the packet loss discard. | 1.3.6.1.4.1.9.9.524.1.9.2.1.21 | Unsigned32 | read-only | current |
| cLQVMediaClientHistPktLossFail OBJECT-TYPE This object uniquely identifies the packet loss fail | 1.3.6.1.4.1.9.9.524.1.9.2.1.22 | Unsigned32 | read-only | current |
| cLQVMediaClientHistNumVideoStreams OBJECT-TYPE This object uniquely identifies the number of video streams. | 1.3.6.1.4.1.9.9.524.1.9.2.1.23 | Unsigned32 | read-only | current |
| cLQVMediaClientHistCacEnable OBJECT-TYPE This object uniquely identifies thecac enable state. | 1.3.6.1.4.1.9.9.524.1.9.2.1.24 | INTEGER {video(1), voice(2), videoAndVoice(3), none(4)} | read-only | current |
| cLQVMediaClientHistStreamName OBJECT-TYPE Name of the media stream the client was admitted at the particular timestamp. | 1.3.6.1.4.1.9.9.524.1.9.2.1.25 | SnmpAdminString | read-only | current |
| cLQVMediaClientHistSrcInetAddrType OBJECT-TYPE This object represents Multicast Destination Start Address Type | 1.3.6.1.4.1.9.9.524.1.9.2.1.26 | InetAddressType | read-only | current |
| cLQVMediaClientHistSrcInetAddr OBJECT-TYPE This object represents Multicast Destination Start Address | 1.3.6.1.4.1.9.9.524.1.9.2.1.27 | InetAddress | read-only | current |
| cLQVMediaClientHistDestInetAddrType OBJECT-TYPE This object represents Multicast Destination End Address Type | 1.3.6.1.4.1.9.9.524.1.9.2.1.28 | InetAddressType | read-only | current |
| cLQVMediaClientHistDestInetAddr OBJECT-TYPE This object represents Multicast Destination End Address | 1.3.6.1.4.1.9.9.524.1.9.2.1.29 | InetAddress | read-only | current |
| cLQMediaMulticastClientTable OBJECT-TYPE This table represents Media related client properties for multicast clients. There exists a row in this table for each associated Media clients. A row is added to this table by the agent when a client gets associated Similarly a row gets deleted automatically when the client gets disassociated. | 1.3.6.1.4.1.9.9.524.1.9.3 | not-accessible | current | |
| cLQMediaMulticastClientEntry OBJECT-TYPE Each entry represents a conceptual row in cLQMediaMulticastClientTable and corresponds to Media properties of client. | 1.3.6.1.4.1.9.9.524.1.9.3.1 | not-accessible | current | |
| cLQVMediaClientMCGrpIpAddrType OBJECT-TYPE This object represents Multicast destination IP address type. | 1.3.6.1.4.1.9.9.524.1.9.3.1.1 | InetAddressType | not-accessible | current |
| cLQVMediaClientMCGrpIpAddr OBJECT-TYPE This object represents Multicast destination IP address. | 1.3.6.1.4.1.9.9.524.1.9.3.1.2 | InetAddress | not-accessible | current |
| cLQVMediaClientVlanId OBJECT-TYPE This object uniquely identifies the VLAN configured for the client. | 1.3.6.1.4.1.9.9.524.1.9.3.1.3 | Unsigned32 | read-only | current |
| cLQVMediaMCClientApName OBJECT-TYPE This object uniquely identifies the Access Point to which the multicast client is connected. | 1.3.6.1.4.1.9.9.524.1.9.3.1.4 | SnmpAdminString | read-only | current |
| cLQVMediaClientMCUCStatus OBJECT-TYPE This object uniquely identifies whether the multicast client has Multicast-to-Unicast feature enabled. | 1.3.6.1.4.1.9.9.524.1.9.3.1.5 | SnmpAdminString | read-only | current |
| cLQd11SipCacConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.10 | |||
| cLQd11SipCacConfigTable OBJECT-TYPE This table contains the information about the SIP CAC configuration corresponding to the dot11 bands of the APs that have joined the controller. The parameters specify how the SIP call reserves CAC bandwidth. | 1.3.6.1.4.1.9.9.524.1.10.1 | not-accessible | current | |
| cLQd11SipCacConfigEntry OBJECT-TYPE An entry containing SIP CAC configuration for a particular type of wireless interface. | 1.3.6.1.4.1.9.9.524.1.10.1.1 | not-accessible | current | |
| cLQd11SipCacConfigCodecType OBJECT-TYPE This object specifies the configured codec for SIP Cac configuration of the dot11 band for the APs associated with this controller. Codec determines the bandwidth to be reserved for voice call. userDefined - User defines the bandwidth, cLQd11SipCacConfigBw has to be configured g711 - standard Codec G711 g729 - standard Codec G729 | 1.3.6.1.4.1.9.9.524.1.10.1.1.1 | INTEGER {userDefined(1), g711(2), g729(3)} | read-write | current |
| cLQd11SipCacConfigBw OBJECT-TYPE This object specifies the configured bandwidth in kbps for SIP CAC configuration of the dot11 band for the APs associated with this controller. This is configurable only if cLQd11SipCacConfigCodecType is 'userDefined' | 1.3.6.1.4.1.9.9.524.1.10.1.1.2 | Unsigned32 | read-write | current |
| cLQd11SipCacConfigVoiceSampleSize OBJECT-TYPE This object specifies the configured voice sample size in milliseconds for SIP Cac configuration of the dot11 band for the APs associated with this controller. | 1.3.6.1.4.1.9.9.524.1.10.1.1.3 | Unsigned32 | read-write | current |
| cLQd11SipCacMaxPossibleVoiceCalls OBJECT-TYPE This object represents the maximum possible voice calls that can be made with respect to the current SIP CAC configuration. | 1.3.6.1.4.1.9.9.524.1.10.1.1.4 | Unsigned32 | read-only | current |
| cLQd11SipCacMaxPossibleReservedRoamingCalls OBJECT-TYPE This object represents the maximum possible reserved roaming calls that can be made with respect to the current SIP CAC configuration. | 1.3.6.1.4.1.9.9.524.1.10.1.1.5 | Unsigned32 | read-only | current |
| cLQMediaStreamConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.11 | |||
| cLQMStreamTable OBJECT-TYPE This table populates the Media stream configuration | 1.3.6.1.4.1.9.9.524.1.11.1 | not-accessible | current | |
| cLQMStreamEntry OBJECT-TYPE Each entry represents a conceptual row in cLQd11GprTable and corresponds to the GPR configuration on a WLAN. | 1.3.6.1.4.1.9.9.524.1.11.1.1 | not-accessible | current | |
| cLQMStreamName OBJECT-TYPE Name of the media stream.Unique identifier for the stream | 1.3.6.1.4.1.9.9.524.1.11.1.1.1 | SnmpAdminString | not-accessible | current |
| cLQMStreamRowStatus OBJECT-TYPE This is the status column for this row and used to create and delete specific instances of rows in this table. The following objects are mandatory for successful creation of an entry: cLQMStreamName, | 1.3.6.1.4.1.9.9.524.1.11.1.1.2 | RowStatus | read-create | current |
| cLQMStreamDestIPStartAddr OBJECT-TYPE This object represents Multicast start IP address | 1.3.6.1.4.1.9.9.524.1.11.1.1.3 | IpAddress | read-create | deprecated |
| cLQMStreamDestIPEndAddr OBJECT-TYPE This object represents Multicast destination end IP address | 1.3.6.1.4.1.9.9.524.1.11.1.1.4 | IpAddress | read-create | deprecated |
| cLQMStreamstate OBJECT-TYPE This object represents media stream state. | 1.3.6.1.4.1.9.9.524.1.11.1.1.5 | TruthValue | read-create | current |
| cLQMStreamRrcExpBw OBJECT-TYPE This object represents Resource Reservation control bandwidth utilization | 1.3.6.1.4.1.9.9.524.1.11.1.1.6 | Unsigned32 (1..35000) | read-create | current |
| cLQMStreamRrcAvgPkt OBJECT-TYPE This object represents RRC Average packet size. | 1.3.6.1.4.1.9.9.524.1.11.1.1.7 | Unsigned32 (100..1500) | read-create | current |
| cLQMStreamReRrc OBJECT-TYPE This object represents re-RRC calculations enabled/disabled. A true value represents re-RRC enabled and false value represents Re-RRC disabled | 1.3.6.1.4.1.9.9.524.1.11.1.1.8 | TruthValue | read-create | current |
| cLQMStreamRrcQos OBJECT-TYPE This object represents RRC QOS queue information. | 1.3.6.1.4.1.9.9.524.1.11.1.1.9 | INTEGER {besteffort(1), background(2), undefined(3), excellenteffort(4), ctrlload(5), video(6), voice(7), network(8)} | read-create | current |
| cLQMStreamRrcType OBJECT-TYPE This object represents RRC Media stream type mc2uc - multicast to unicast enabled. m-only - only multicast enabled. unicast - unicast enabled. disabled - neither multicast nor unicast enabled. | 1.3.6.1.4.1.9.9.524.1.11.1.1.10 | INTEGER {mc2uc(1), m-only(2), unicast(3), disabled(4)} | read-create | current |
| cLQMStreamRrcPriority OBJECT-TYPE This object represents RRC Priority bit set within media stream | 1.3.6.1.4.1.9.9.524.1.11.1.1.11 | INTEGER (1..8) | read-create | current |
| cLQMStreamRrcViolation OBJECT-TYPE This object represents RRC Violation. After re-RRC, if media stream violates profile then whether to stash it into best effort or drop it | 1.3.6.1.4.1.9.9.524.1.11.1.1.12 | INTEGER {fallback(1), drop(2)} | read-create | current |
| cLQMStreamRrcPolicy OBJECT-TYPE This object represents media stream admit/Deny.A true value represents media stream admit and false value represents media stream deny | 1.3.6.1.4.1.9.9.524.1.11.1.1.13 | TruthValue | read-write | current |
| cLQMStreamDestStartInetAddrType OBJECT-TYPE This object represents Multicast Destination Start Address Type | 1.3.6.1.4.1.9.9.524.1.11.1.1.14 | InetAddressType | read-create | current |
| cLQMStreamDestStartInetAddr OBJECT-TYPE This object represents Multicast Destination Start Address | 1.3.6.1.4.1.9.9.524.1.11.1.1.15 | InetAddress | read-create | current |
| cLQMStreamDestEndInetAddrType OBJECT-TYPE This object represents Multicast Destination End Address Type | 1.3.6.1.4.1.9.9.524.1.11.1.1.16 | InetAddressType | read-create | current |
| cLQMStreamDestEndInetAddr OBJECT-TYPE This object represents Multicast Destination End Address | 1.3.6.1.4.1.9.9.524.1.11.1.1.17 | InetAddress | read-create | current |
| cLQMStreamSdpConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.11.2 | |||
| cLQMStreamSdpUrl OBJECT-TYPE Media Stream Session announcewment message - Session description protocol (SDP) URL | 1.3.6.1.4.1.9.9.524.1.11.2.1 | OCTET STRING (SIZE(0..128)) | read-write | current |
| cLQMStreamSdpEmail OBJECT-TYPE Media Stream Session announcewment message - Session description protocol (SDP) Email | 1.3.6.1.4.1.9.9.524.1.11.2.2 | OCTET STRING (SIZE(0..64)) | read-write | current |
| cLQMStreamSdpPhone OBJECT-TYPE Media Stream Session announcewment message - Session description protocol (SDP) Phone | 1.3.6.1.4.1.9.9.524.1.11.2.3 | OCTET STRING (SIZE(0..30)) | read-write | current |
| cLQMStreamSdpNote OBJECT-TYPE Media Stream Session announcewment message - Session description protocol (SDP) Note | 1.3.6.1.4.1.9.9.524.1.11.2.4 | OCTET STRING (SIZE(0..128)) | read-write | current |
| cLQMStreamSdpStatus OBJECT-TYPE Media Stream Session announcewment message - Session description protocol (SDP) Status | 1.3.6.1.4.1.9.9.524.1.11.2.5 | TruthValue | read-write | current |
| cLQMStreamRrcGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.11.3 | |||
| cLQMStreamRrcGlobalState OBJECT-TYPE This object represents media stream feature global enable. A 'True' value represents media stream feature enable . A 'False' value represents media stream feature disable. | 1.3.6.1.4.1.9.9.524.1.11.3.1 | TruthValue | read-write | current |
| cLQPreferredCallConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.12 | |||
| cLQPreferredCallTable OBJECT-TYPE This table populates the preferred call configuration | 1.3.6.1.4.1.9.9.524.1.12.1 | not-accessible | current | |
| cLQPreferredCallEntry OBJECT-TYPE Each entry represents a conceptual row in cLQPreferredCallTable and corresponds to the preferred call of the user. | 1.3.6.1.4.1.9.9.524.1.12.1.1 | not-accessible | current | |
| cLQPreferredCallIndex OBJECT-TYPE This object represents the index of the preferred call configured by the user. When the call comes to any of these numbers, even if there is no bandwidth available in the configured voice pool, WLC should facilitate the urgency of these calls in any way possible without potentially altering the quality of the existing calls. This is supported only for those clients which use SIP based CAC for bandwidth allocation in the WLC. | 1.3.6.1.4.1.9.9.524.1.12.1.1.1 | Unsigned32 (1..6) | not-accessible | current |
| cLQPreferredCallNumber OBJECT-TYPE This object represents the preferred call number configured by the user. When the call comes to any of these numbers, even if there is no bandwidth available in the configured voice pool. WLC should facilitate the urgency of these calls in any way possible without potentially altering the quality of the existing calls. This is supported only for those clients which use SIP based CAC for bandwidth allocation in the WLC. | 1.3.6.1.4.1.9.9.524.1.12.1.1.2 | DisplayString (SIZE(0..32)) | read-create | current |
| cLQPreferredCallRowStatus OBJECT-TYPE This is the status column for this row and used to create and delete specific instances of rows in this table. The following objects are mandatory for successful creation of an entry: cLQPreferredCallIndex | 1.3.6.1.4.1.9.9.524.1.12.1.1.3 | RowStatus | read-create | current |
| cLQConfigObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.13 | |||
| ciscoLwappVoipCallFailureNotifEnabled OBJECT-TYPE The object to control the generation of ciscoLwappVoipCallFailureNotif notification. A value of 'true' indicates that the agent generates ciscoLwappVoipCallFailureNotif notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappVoipCallFailureNotif notification. | 1.3.6.1.4.1.9.9.524.1.13.1 | TruthValue | read-write | current |
| ciscoLwappKtsVoipCallFailureNotifEnabled OBJECT-TYPE The object to control the generation of ciscoLwappKtsVoipCallFailureNotif notification. A value of 'true' indicates that the agent generates ciscoLwappKtsVoipCallFailureNotif notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappKtsVoipCallFailureNotif notification. | 1.3.6.1.4.1.9.9.524.1.13.2 | TruthValue | read-write | current |
| cLQoSProfileConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.14 | |||
| cLQoSProfileTable OBJECT-TYPE This table represents the configurable priority related qos paramaters for the wlan. There exists a row in this table for each qos profile type. | 1.3.6.1.4.1.9.9.524.1.14.1 | not-accessible | current | |
| cLQoSProfileEntry OBJECT-TYPE Each entry corresponds to one of the existing profile types such as gold, silver, bronze, platinum. | 1.3.6.1.4.1.9.9.524.1.14.1.1 | not-accessible | current | |
| cLQoSProfileName OBJECT-TYPE Name of the profile, unique identifier for the profile. | 1.3.6.1.4.1.9.9.524.1.14.1.1.1 | SnmpAdminString | not-accessible | current |
| cLQoSMaximumPriority OBJECT-TYPE This object specifies the maximum QoS priority of the WLAN associated with this profile. | 1.3.6.1.4.1.9.9.524.1.14.1.1.2 | INTEGER {besteffort(1), background(2), video(3), voice(4)} | read-write | current |
| cLQoSUnicastDefPriority OBJECT-TYPE This object specifies the unicast default QoS priority of the WLAN associated with this profile | 1.3.6.1.4.1.9.9.524.1.14.1.1.3 | INTEGER {besteffort(1), background(2), video(3), voice(4)} | read-write | current |
| cLQoSMulticastDefPriority OBJECT-TYPE This object specifies the multicast default QoS priority of the WLAN associated with this profile. | 1.3.6.1.4.1.9.9.524.1.14.1.1.4 | INTEGER {besteffort(1), background(2), video(3), voice(4)} | read-write | current |
| cLQoSClientDSAverageDataRate OBJECT-TYPE This object specifies Average Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.5 | Unsigned32 | read-write | current |
| cLQoSClientUSAverageDataRate OBJECT-TYPE This object specifies Average Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.6 | Unsigned32 | read-write | current |
| cLQoSClientDSBurstDataRate OBJECT-TYPE This object specifies Burst Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.7 | Unsigned32 | read-write | current |
| cLQoSClientUSBurstDataRate OBJECT-TYPE This object specifies Burst Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.8 | Unsigned32 | read-write | current |
| cLQoSClientDSAvgRealTimeDataRate OBJECT-TYPE This object specifies average real time Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.9 | Unsigned32 | read-write | current |
| cLQoSClientUSAvgRealTimeDataRate OBJECT-TYPE This object specifies average real time Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.10 | Unsigned32 | read-write | current |
| cLQoSClientDSBurstRealTimeDataRate OBJECT-TYPE This object specifies burst real time Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.11 | Unsigned32 | read-write | current |
| cLQoSClientUSBurstRealTimeDataRate OBJECT-TYPE This object specifies burst real time Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.12 | Unsigned32 | read-write | current |
| cLQoSSsidDSAverageDataRate OBJECT-TYPE This object specifies Average Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.13 | Unsigned32 | read-write | current |
| cLQoSSsidUSAverageDataRate OBJECT-TYPE This object specifies Average Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.14 | Unsigned32 | read-write | current |
| cLQoSSsidDSBurstDataRate OBJECT-TYPE This object specifies Burst Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.15 | Unsigned32 | read-write | current |
| cLQoSSsidUSBurstDataRate OBJECT-TYPE This object specifies Burst Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.16 | Unsigned32 | read-write | current |
| cLQoSSsidDSAvgRealTimeDataRate OBJECT-TYPE This object specifies average real time Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.17 | Unsigned32 | read-write | current |
| cLQoSSsidUSAvgRealTimeDataRate OBJECT-TYPE This object specifies average real time Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.18 | Unsigned32 | read-write | current |
| cLQoSSsidDSBurstRealTimeDataRate OBJECT-TYPE This object specifies burst real time Data Rate per user on downstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.19 | Unsigned32 | read-write | current |
| cLQoSSsidUSBurstRealTimeDataRate OBJECT-TYPE This object specifies burst real time Data Rate per user on upstream. Value of 0 indicates the feature is disabled. | 1.3.6.1.4.1.9.9.524.1.14.1.1.20 | Unsigned32 | read-write | current |
| cLQoSSipSnoopingConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.1.15 | |||
| cLQoSSipSnoopingPortRangeStart OBJECT-TYPE This is the starting port with respect to SIP snooping feature on controller. If single port has to be used, configure cLQoSSipSnoopingPortRangeStart and cLQoSSipSnoopingPortRangeEnd with same value. | 1.3.6.1.4.1.9.9.524.1.15.1 | Unsigned32 | read-write | current |
| cLQoSSipSnoopingPortRangeEnd OBJECT-TYPE This is the ending port with respect to SIP snooping feature on controller. If single port has to be used, configure cLQoSSipSnoopingPortRangeStart and cLQoSSipSnoopingPortRangeEnd with same value. | 1.3.6.1.4.1.9.9.524.1.15.2 | Unsigned32 | read-write | current |
| ciscoLwappQosMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.2 | |||
| ciscoLwappQosMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.2.1 | |||
| ciscoLwappQosMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.2.2 | |||
| ciscoLwappQosMIBNotifObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.524.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| ciscoLwappVoipCallFailureNotif NOTIFICATION-TYPE This notification is generated when ever a VOIP call failure occurs. | 1.3.6.1.4.1.9.9.524.0.1 | current |
| ciscoLwappMediaMCStreamFailureNotif NOTIFICATION-TYPE This notification is generated when ever a Multicast to Unicast Media conversion failure occurs. AP MAC Address and slotID will be sent as index for AP related objects. | 1.3.6.1.4.1.9.9.524.0.2 | current |
| ciscoLwappMediaMCStreamAdmitNotif NOTIFICATION-TYPE This notification is generated when ever a client gets admitted to the stream. AP MAC Address and slotID will be sent as index for AP related objects. | 1.3.6.1.4.1.9.9.524.0.3 | current |
| ciscoLwappMediaMCStreamDelistNotif NOTIFICATION-TYPE This notification is generated when ever a client delists from the stream. AP MAC Address and slotID will be sent as index for AP related objects. | 1.3.6.1.4.1.9.9.524.0.4 | current |
| ciscoLwappKtsVoipCallFailureNotif NOTIFICATION-TYPE This notification is generated when ever a KTS VOIP call failure occurs. | 1.3.6.1.4.1.9.9.524.0.5 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoLwappQosMIBCompliance MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappQosMIB module. | 1.3.6.1.4.1.9.9.524.2.1.1 | deprecated |
| ciscoLwappQosMIBComplianceRev1 MODULE-COMPLIANCE The compliance statement for the SNMP entities that implement the ciscoLwappQosMIB module. | 1.3.6.1.4.1.9.9.524.2.1.2 | deprecated |
| ciscoLwappQosMIBComplianceRev2 MODULE-COMPLIANCE Implementation of this group is mandatory only for the platforms which implement the ciscoLwappQosMIB module. | 1.3.6.1.4.1.9.9.524.2.1.3 | deprecated |
| ciscoLwappQosMIBComplianceRev3 MODULE-COMPLIANCE Implementation of this group is mandatory only for the platforms which implement the ciscoLwappQosMIB module. | 1.3.6.1.4.1.9.9.524.2.1.4 | current |
| ciscoLwappQosDot11aConfigGroup OBJECT-GROUP This collection of objects represents the quality-of-service parameters 802.11a networks. | 1.3.6.1.4.1.9.9.524.2.2.1 | current |
| ciscoLwappQosDot11bConfigGroup OBJECT-GROUP This collection of objects represents the quality-of-service parameters 802.11b networks. | 1.3.6.1.4.1.9.9.524.2.2.2 | current |
| ciscoLwappQosDot11WlanConfigGroup OBJECT-GROUP This collection of objects represents the quality-of-services parameters on a particular WLAN. | 1.3.6.1.4.1.9.9.524.2.2.3 | current |
| ciscoLwappQosDot11CacStatsGroup OBJECT-GROUP This collection of objects provide the call admission control statistics observed on the dot11 interfaces of an AP. | 1.3.6.1.4.1.9.9.524.2.2.4 | current |
| ciscoLwappQosDot11aConfigGroupSup1 OBJECT-GROUP This collection of objects represents the quality-of-service parameters 802.11a networks. | 1.3.6.1.4.1.9.9.524.2.2.5 | current |
| ciscoLwappQosDot11bConfigGroupSup1 OBJECT-GROUP This collection of objects represents the quality-of-service parameters 802.11b networks. | 1.3.6.1.4.1.9.9.524.2.2.6 | current |
| ciscoLwappQosDot11aConfigGroupSup2 OBJECT-GROUP This collection of objects represents the quality-of-service parameters 802.11a networks. | 1.3.6.1.4.1.9.9.524.2.2.7 | current |
| ciscoLwappQosDot11bConfigGroupSup2 OBJECT-GROUP This collection of objects represents the quality-of-service parameters 802.11b networks. | 1.3.6.1.4.1.9.9.524.2.2.8 | current |
| ciscoLwappQosDot11SipCacStatsGroup OBJECT-GROUP This collection of objects provide the SIP call admission control statistics observed on the dot11 interfaces of an AP. | 1.3.6.1.4.1.9.9.524.2.2.9 | current |
| ciscoLwappQosDot11SipConfigGroup OBJECT-GROUP This collection of objects represents the SIP call admission control configuration parameters. | 1.3.6.1.4.1.9.9.524.2.2.10 | current |
| ciscoLwappQosDot11VoiceStatsGroup OBJECT-GROUP This collection of objects represents the Voice statistics parameters. | 1.3.6.1.4.1.9.9.524.2.2.11 | current |
| ciscoLwappQosDot11VoiceConfigGroup OBJECT-GROUP This collection of objects represents the Voice statistics parameters. | 1.3.6.1.4.1.9.9.524.2.2.12 | current |
| ciscoLwappQosDot11VoiceNotifGroup NOTIFICATION-GROUP This collection of objects represents the Voice notification parameters. | 1.3.6.1.4.1.9.9.524.2.2.13 | current |
| ciscoLwappQosConfigGroup OBJECT-GROUP This collection of objects represents the quality-of-service configuration parameters. | 1.3.6.1.4.1.9.9.524.2.2.14 | current |
| ciscoLwappQosDot11VoiceNotifGroupSup1 NOTIFICATION-GROUP This collection of objects represents the Voice notification parameters. | 1.3.6.1.4.1.9.9.524.2.2.15 | current |
| ciscoLwappQosConfigGroupSup1 OBJECT-GROUP This collection of objects represents the quality-of-service configuration parameters. | 1.3.6.1.4.1.9.9.524.2.2.16 | current |