TIMETRA-QOS-MIB

TEXTUAL-CONVENTION

The type TQosPrefixListType enumerates all possible prefix list types.

TEXTUAL-CONVENTION

The TmnxMcFrClassIndex indicates the class of a Multiclass Fr bundle. For example, a 4-class Fr link has 4 classes with indices 0, 1, 2, and 3.

TEXTUAL-CONVENTION

TmnxSchedPlcyParentLocation is an enumerated integer that indicates the location in which the schedulers in the scheduler policy will look to find their parent. none (1) - Indicates that the schedulers may not have a parent configured. sub (2) - Indicates that the schedulers should look for their parent in the subscriber profile's ingress or egress (as appropriate) scheduler policy. vport (3) - Indicates that the schedulers should look for their parent in the VPort's ingress or egress (as appropriate) scheduler policy.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter).

OBJECT-TYPE

Information about a particular DSCP Name, particularly the DSCP value. It maps a DSCP Name into a DSCP value. Some default entries are created by the agent. Default entries have tDSCPNameStorageType permanent, and can not be deleted. Entries cannot be created by user but may be supported later. An attempt to create a row in this table would return no creation.

OBJECT-TYPE

The name assigned to the DSCP Value.

OBJECT-TYPE

Row Status of the entry.

OBJECT-TYPE

The storage type of this row in the table.

OBJECT-TYPE

The DSCP Value.

OBJECT-TYPE

timestamp of last change to this row in tDSCPNameTable.

OBJECT-IDENTITY

OBJECT-TYPE

A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue).

OBJECT-TYPE

Information about a particular Forwarding Class Name, particularly the Forwarding Class value. Some default entries are created by the agent. Default entries have tFCStorageType permanent, and can not be deleted. Entries cannot be created by user but maybe supported in future. An attempt to create a row in this table would return no creation.

OBJECT-TYPE

Forwarding class name.

OBJECT-TYPE

Row Status of the entry.

OBJECT-TYPE

The storage type of this row in the table.

OBJECT-TYPE

FC Value.

OBJECT-TYPE

timestamp of last change to this row in tFCNameTable.

OBJECT-IDENTITY

OBJECT-TYPE

OBJECT-TYPE

Information about a particular Sap Ingress Policy. sap-ingress policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tSapIngressIndex uniquely identifies sap-ingress QoS policy. User configured policies can only have values between (1..65535). All other values are reserved for system generated policies.

OBJECT-TYPE

Row Status for the policy. The deletion of this row has an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable

OBJECT-TYPE

Scope of the policy. If the scope is 'exclusive', it can only be instantiated once whereas it could have multiple instances if defined as 'exclusive'.

OBJECT-TYPE

user-provided description of the policy.

OBJECT-TYPE

tSapIngressDefaultFC specifies the forwarding class or the sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. If not specified explicitly, all traffic will be classified as best-effort 'be'.

OBJECT-TYPE

the priority to assign to traffic ingressing as the default action queue.

OBJECT-TYPE

indicates which type of match criteria the policy should use. when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for match entries in tSapIngressMacCriteriaTable. the value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. the value is set to none(3) when the last criteria table entry is removed. when tSapIngressMatchCriteria is set to ip(1), no tSapIngressMacCriteriaTable entries can be created. when set to mac(2), no tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable entries can be created.

OBJECT-TYPE

timestamp of last change to this row in tSapIngressTable.

OBJECT-TYPE

The value of tSapIngressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of the object tSapIngressDefFCHsmdaCntrOvr specifies the counter to use for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

tSapIngressMacCritType specifies which type of entries this mac filter can contain. If tSapIngressMacCritType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type vid(3) or isid(2). tSapIngressMacCritType 'isid(2)' is not supported here. If tSapIngressMacCritType is set to vid(3) the only accepted match criteria for the filter entries are: - tSapIngressMacCritInnerTagValue - tSapIngressMacCritInnerTagMask - tSapIngressMacCritOuterTagValue - tSapIngressMacCritOuterTagMask tSapIngressMacCritType can only be changed if the filter has no entries. The value will be set to 'normal(1)' if IP or IPV6 criteria are added to the this SAP ingress QoS policy. Any change attempt in this case will be silently discarded.

OBJECT-TYPE

The value of tSapIngressPolicyName specifies the name to associate with this policy.

OBJECT-TYPE

The value of tSapIngressIPCritType specifies whether Vxlan Vni classification parameters can be configured within an IP Criteria. If tSapIngressIPCritType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type 'vxlanVni (2)'. If tSapIngressIPCritType is set to 'vxlanVni (2)', all match criteria including the following criteria can also be configured: - tSapIngressIPCritVxlanVniVal1, - tSapIngressIPCritVxlanVniVal2, - tSapIngressIPCritVxlanVniOper tSapIngressIPCritType can only be changed if the IP criteria has no entries and no references exists for qos policy. The value will be set to 'normal(1)' if IP or IPV6 criteria are added to the this SAP ingress QoS policy. Any change attempt in this case will be silently discarded.

OBJECT-TYPE

The value of tSapIngressIPv6CritType specifies whether Vxlan Vni classification parameters can be configured within an IPv6 Criteria. If tSapIngressIPv6CritType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type 'vxlanVni (2)'. If tSapIngressIPv6CritType is set to 'vxlanVni (2)', all match criteria including the following criteria can also be configured: - tSapIngressIPv6CritVxlanVniVal1, - tSapIngressIPv6CritVxlanVniVal2, - tSapIngressIPv6CritVxlanVniOper tSapIngressIPCritType can only be changed if the IP criteria has no entries and no references exists for qos policy. The value will be set to 'normal(1)' if IP or IPV6 criteria are added to the this SAP ingress QoS policy. Any change attempt in this case will be silently discarded.

OBJECT-TYPE

The value of tSapIngressIsPolicyActive indicates whether this policy is active or not, i.e., whether this policy is currently consuming a forwarding plane (FP) resource on at least one FP in the system.

OBJECT-TYPE

The value of tSapIngressIngClassPlcy specifies the ingress classification policy to apply on this sap ingress entry

OBJECT-TYPE

information about all sap-ingress policies' queues.

OBJECT-TYPE

Information about a particular queue for a sap-ingress policy. Queue (1) is the used as a default for unicast and queue (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user.

OBJECT-TYPE

The queue ID is used as the secondary index to the table entry.

OBJECT-TYPE

Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

The scheduler to which this queue would be feeding to.

OBJECT-TYPE

This specifies the level of priority while feeding to the parent.

OBJECT-TYPE

The weight that needs to be used by the scheduler to which this queue would be feeding to.

OBJECT-TYPE

This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.

OBJECT-TYPE

The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.

OBJECT-TYPE

This object specifies if this is a multicast queue or not.

OBJECT-TYPE

tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.

OBJECT-TYPE

The amount of reserved buffer space (in kilobytes) for the queue.

OBJECT-TYPE

The maximum amount of buffer space (in kilobytes) allowed for the queue. This object has been replaced with tSapIngressQueueMBSBytes object.

OBJECT-TYPE

The percentage of buffer space for the queue, used exclusively by high priority packets. This object is obsoleted in 15.0 release and has been replaced with tSapIngQDrpTailLowReductnMbs object.

OBJECT-TYPE

The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The administrative PIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngressQueueAdminPIRHi and tSapIngressQueueAdminPIRLo objects.

OBJECT-TYPE

The administrative CIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngressQueueAdminCIRHi and tSapIngressQueueAdminCIRLo objects.

OBJECT-TYPE

The operating PIR.

OBJECT-TYPE

The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.

OBJECT-TYPE

timestamp of last change to this row in tSapIngressQueueTable.

OBJECT-TYPE

tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdminCIR.

OBJECT-TYPE

tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.

OBJECT-TYPE

The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue.

OBJECT-TYPE

The maximum amount of buffer space (in bytes) allowed for the queue.

OBJECT-TYPE

The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.

OBJECT-TYPE

The administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminPIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.

OBJECT-TYPE

The administrative CIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminCIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.

OBJECT-TYPE

The value of tSapIngressQueueRateType specifies the type of Ingress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapIngressQueueAdminCIRPercent and tSapIngressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit' or 'percentReferPortLimit', the ingress queue rates are specified in percentage. The objects tSapIngressQueueAdminCIR and tSapIngressQueueAdminPIR will be set to their default values.

OBJECT-TYPE

The value of tSapIngressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.

OBJECT-TYPE

The value of tSapIngressQueuePktOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for queue accounting. A 'wrongValue' error is returned while trying to set odd values for this object. This object is only supported for queues residing on FP2 or greater forwarding planes. It is ignored for queues on FP1 forwarding planes.

OBJECT-TYPE

The value of tSapIngQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by tSapIngressQueueMBSBytes.

OBJECT-TYPE

The value of tSapIngressQueueAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIngressQueueAdminPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngressQueueAdminPIRHi along with the value of tSapIngressQueueAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapIngressQueueAdminPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIngressQueueAdminPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngressQueueAdminPIRHi along with the value of tSapIngressQueueAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapIngressQueueAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIngressQueueAdminCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngressQueueAdminCIRHi along with the value of tSapIngressQueueAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapIngressQueueAdminCIRLo specifies the lower 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIngressQueueAdminCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngressQueueAdminCIRHi along with the value of tSapIngressQueueAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The adaptation rule to be used while computing the operational FIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The administrative FIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminFIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.

OBJECT-TYPE

The value of tSapIngressQueueAdminFIRHi specifies the upper 32 bits of the administrative FIR specified by the user. This value should always be set along with tSapIngressQueueAdminFIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngressQueueAdminCIRHi along with the value of tSapIngressQueueAdminFIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapIngressQueueAdminFIRLo specifies the lower 32 bits of the administrative FIR specified by the user. This value should always be set along with tSapIngressQueueAdminFIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngressQueueAdminFIRHi along with the value of tSapIngressQueueAdminFIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

tSapIngressQueueCIRNonProfiling specifies the CIR to affect the scheduling priority of a queue but does not modify the profile of packets depending on the specified CIR.

OBJECT-TYPE

a list of all DSCP entries for all sap-ingress policies.

OBJECT-TYPE

Information about a particular DSCP entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapIngressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapIngressDSCP).

OBJECT-TYPE

OBJECT-TYPE

This object allows creation/deletion of rows in this table.

OBJECT-TYPE

tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDSCPFC is specified explicitly, this match will be ignored for classification purposes.

OBJECT-TYPE

OBJECT-TYPE

timestamp of last change to this row in tSapIngressDSCPTable.

OBJECT-TYPE

The value of the object tSapIngressDSCPHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

a list of all dot1p entries for all sap-ingress policies.

OBJECT-TYPE

Information about a particular dot1p match for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.

OBJECT-TYPE

Row Status for this sap-ingress policy's dot1p entry.

OBJECT-TYPE

tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDot1pFC is specified explicitly, this match will be ignored for classification purposes.

OBJECT-TYPE

priority to use for packets that match the dot1p value tSapIngressDot1pValue.

OBJECT-TYPE

timestamp of last change to this row in tSapIngressDot1pTable.

OBJECT-TYPE

The value of the object tSapIngressDot1pHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

information about all sap-ingress policies' IP criteria entries.

OBJECT-TYPE

Information about a particular IP criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

unique identifier separates this entry from others in this policy.

OBJECT-TYPE

Row Status for the IP Criteria entry.

OBJECT-TYPE

description of this IP criteria entry.

OBJECT-TYPE

tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.

OBJECT-TYPE

priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.

OBJECT-TYPE

IP address to match with source IP of the packet. The value of object tSapIngressIPCriteriaSourceIpAddr needs to be always set together along with tSapIngressIPCriteriaSourceIpMask or tSapIngressIPCritSrcIpFullMask, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

If different from 0, the object tSapIngressIPCriteriaSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received source IP address to match the tSapIngressIPCriteriaSourceIpAddr. If the value of tSapIngressIPCriteriaSourceIpMask is 0, and the value of tSapIngressIPCritSrcIpFullMask is non zero then the value of tSapIngressIPCritSrcIpFullMask is used as mask. If the value of tSapIngressIPCriteriaSourceIpMask is non zero, it will be equal to the mask expressed the object tSapIngressIPCritSrcIpFullMask. If both tSapIngressIPCriteriaSourceIpMask and tSapIngressIPCritSrcIpFullMask are set to 0, no matching is done on the source Ip address. If a value is specified for this object, then the value of the object tSapIngressIPCritSrcIpFullMask will be set to reflect this same mask. The value of object tSapIngressIPCriteriaSourceIpAddr needs to be always set together along with tSapIngressIPCriteriaSourceIpMask or tSapIngressIPCritSrcIpFullMask, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

IP address to match with destination IP of the packet. The value of object tSapIngressIPCriteriaDestIpAddr needs to be always set together along with tSapIngressIPCriteriaDestIpMask or tSapIngressIPCritDstIpFullMask, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

If different from 0, the object tSapIngressIPCriteriaDestIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tSapIngressIPCriteriaDestIpAddr. If the value of tSapIngressIPCriteriaDestIpMask is 0, and the value of tSapIngressIPCritDstIpFullMask is non zero then the value of tSapIngressIPCritDstIpFullMask is used as mask. If the value of tSapIngressIPCriteriaDestIpMask is non zero, it will be equal to the mask expressed the object tSapIngressIPCritDstIpFullMask. If both tSapIngressIPCriteriaDestIpMask and tSapIngressIPCritDstIpFullMask are set to 0, no matching is done on the Destination Ip address. If a value is specified for this object, then the value of the object tSapIngressIPCritDstIpFullMask will be set to reflect this same mask. The value of object tSapIngressIPCriteriaDestIpAddr needs to be always set together along with tSapIngressIPCriteriaDestIpMask or tSapIngressIPCritDstIpFullMask, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

IP protocol to match. use -1 to disable matching by IP protocol.

OBJECT-TYPE

TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1, tSapIngressIPCritVxlanVniVal2 or tSapIngressIPCritVxlanVniOper is set to non-default values. The value of tSapIngressIPCriteriaSourcePortOperator and tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1, tSapIngressIPCritVxlanVniVal2 or tSapIngressIPCritVxlanVniOper is set to non-default values. The value of tSapIngressIPCriteriaSourcePortOperator and tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator is used as described in TTcpUdpPortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1, tSapIngressIPCritVxlanVniVal2 or tSapIngressIPCritVxlanVniOper is set to non-default values. The value of tSapIngressIPCriteriaSourcePortOperator and tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1, tSapIngressIPCritVxlanVniVal2 or tSapIngressIPCritVxlanVniOper is set to non-default values. The value of tSapIngressIPCriteriaDestPortOperator and tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1, tSapIngressIPCritVxlanVniVal2 or tSapIngressIPCritVxlanVniOper is set to non-default values. The value of tSapIngressIPCriteriaDestPortOperator and tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is used as described in TTcpUdpPortOperator. This object cannot set to non-default value, if the value of tSapIngressIPCritVxlanVniVal1, tSapIngressIPCritVxlanVniVal2 or tSapIngressIPCritVxlanVniOper is set to non-default values. The value of tSapIngressIPCriteriaDestPortOperator and tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

DSCP value to match in the packet

OBJECT-TYPE

matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off).

OBJECT-TYPE

timestamp of last change to this row in tSapIngressIPCriteriaTable.

OBJECT-TYPE

The value of the object tSapIngressIPCritHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-ingress policy specified by tSapIngressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

If different from 0, the object tSapIngressIPCritSrcIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tSapIngressIPCriteriaSourceIpAddr. If the value of tSapIngressIPCriteriaSourceIpMask is non zero, it will be equal to the mask expressed in the object tSapIngressIPCritSrcIpFullMask. If both tSapIngressIPCriteriaSourceIpMask and tSapIngressIPCritSrcIpFullMask are set to 0, no matching is done on the Source IP address. If a regular mask is specified for tSapIngressIPCritSrcIpFullMask then the value of tSapIngressIPCriteriaSourceIpMask will be changed to reflect this value. The value of object tSapIngressIPCriteriaSourceIpAddr needs to be always set together along with tSapIngressIPCriteriaSourceIpMask or tSapIngressIPCritSrcIpFullMask, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

If different from 0, the object tSapIngressIPCritDstIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Dest IP address to match the tSapIngressIPCriteriaDestIpAddr. If the value of tSapIngressIPCriteriaDestIpMask is non zero, it will be equal to the mask expressed in the object tSapIngressIPCritDstIpFullMask. If both tSapIngressIPCriteriaDestIpMask and tSapIngressIPCritDstIpFullMask are set to 0, no matching is done on the Dest IP address. If a regular mask is specified for tSapIngressIPCritDstIpFullMask then the value of tSapIngressIPCriteriaDestIpMask will be changed to reflect this value. The value of object tSapIngressIPCriteriaDestIpAddr needs to be always set together along with tSapIngressIPCriteriaDestIpMask or tSapIngressIPCritDstIpFullMask, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of tSapIngressIPCritActionPolicer specifies the policer identifier to be used for the traffic matching this IP Criteria Entry. It provides the ability to direct specific traffic to a different SAP ingress policer (tSapIngressIPCritActionPolicer) independently from that configured for the traffic's FC in tSapIngressFCPolicer. This action policer will be referred to as a bypass-policer. An 'inconsistentValue' error is returned if tSapIngressIPCritActionPolicer is set to a non-default value when tSapIngressIPCriteriaRowStatus is set to not in service.

OBJECT-TYPE

The value of tSapIngressIPCritSrcIpPrefixList specifies the IP prefix list used as match criterion for the source ip address. The value specified for this object must correspond to a prefix list defined in tQosPrefixListTable. If the value of this object is empty then the values of the objects tSapIngressIPCriteriaSourceIpAddr and tSapIngressIPCriteriaSourceIpMask or tSapIngressIPCritSrcIpFullMask are used as source ip address match criterion. When this object is set to a non-empty value then the objects tSapIngressIPCriteriaSourceIpAddr, tSapIngressIPCriteriaSourceIpMask and tSapIngressIPCritSrcIpFullMask are reset to their default values by the system. Vice versa, when a new (non-default) value is provided for the objects tSapIngressIPCriteriaSourceIpAddr and tSapIngressIPCriteriaSourceIpMask or tSapIngressIPCritSrcIpFullMask then this object is reset to its default (empty) value by the system. An attempt to set tSapIngressIPCritSrcIpPrefixList to a non-default value in combination with setting any of tSapIngressIPCriteriaSourceIpAddr and tSapIngressIPCriteriaSourceIpMask or tSapIngressIPCritSrcIpFullMask to (a) non-default value(s) is rejected by the system.

OBJECT-TYPE

The value of tSapIngressIPCritDstIpPrefixList specifies the IP prefix list used as match criterion for the destination ip address. The value specified for this object must correspond to a prefix list defined in tQosPrefixListTable. If the value of this object is empty then the values of the objects tSapIngressIPCriteriaDestIpAddr and tSapIngressIPCriteriaDestIpMask or tSapIngressIPCritDstIpFullMask are used as destination ip address match criterion. When this object is set to a non-empty value then the objects tSapIngressIPCriteriaDestIpAddr, tSapIngressIPCriteriaDestIpMask and tSapIngressIPCritDstIpFullMask are reset to their default values by the system. Vice versa, when a new (non-default) value is provided for the objects tSapIngressIPCriteriaDestIpAddr and tSapIngressIPCriteriaDestIpMask or tSapIngressIPCritDstIpFullMask then this object is reset to its default (empty) value by the system. An attempt to set tSapIngressIPCritDstIpPrefixList to a non-default value in combination with setting any of tSapIngressIPCriteriaDestIpAddr and tSapIngressIPCriteriaDestIpMask or tSapIngressIPCritDstIpFullMask to (a) non-default value(s) is rejected by the system

OBJECT-TYPE

The value of tSapIngressIPCritVxlanVniVal1 specifies the VNI identifier of the VXLAN to be used for the traffic matching. The value of 0 indicates that the Vxlan Vni classification is disabled. This value can be set to non-default value when the value of tSapIngressIPCriteriaProtocol is set to 'udp' and tSapIngressIPCritType is set to 'vxlanVni (2)'. This object cannot set to non-default value, if the values of tSapIngressIPCriteriaSourcePortValue1, tSapIngressIPCriteriaSourcePortValue2 or tSapIngressIPCriteriaSourcePortOperator and tSapIngressIPCriteriaDestPortValue1, tSapIngressIPCriteriaDestPortValue2 or tSapIngressIPCriteriaDestPortOperator are set to non-default values.

OBJECT-TYPE

The value of tSapIngressIPCritVxlanVniVal2 specifies the VNI identifier of the VXLAN to be used for the traffic matching. The value of 0 indicates that the Vxlan Vni classification is disabled. This value can be set to non-default value when the value of tSapIngressIPCriteriaProtocol is set to 'udp' and tSapIngressIPCritType is set to 'vxlanVni (2)'. This object cannot set to non-default value, if the value of tSapIngressIPCriteriaSourcePortValue1, tSapIngressIPCriteriaSourcePortValue2 or tSapIngressIPCriteriaSourcePortOperator and tSapIngressIPCriteriaDestPortValue1, tSapIngressIPCriteriaDestPortValue2 or tSapIngressIPCriteriaDestPortOperator is set to non-default values.

OBJECT-TYPE

The value of tSapIngressIPCritVxlanVniOper operator specifies the manner in which tSapIngressIPCritVxlanVniVal1 and tSapIngressIPCritVxlanVniVal2 are to be used: Operator Value1 Value2 ---------------------------------------------------- none (0) Any(0) Any(0) eq (1) Specified Val1 Any(0) range(2) Starting Val1 Ending Val2 'Any(0)' specifies that, this object can accept any values but would default to 0. This object cannot set to non-default value, if the value of tSapIngressIPCriteriaSourcePortValue1, tSapIngressIPCriteriaSourcePortValue2 or tSapIngressIPCriteriaSourcePortOperator and tSapIngressIPCriteriaDestPortValue1, tSapIngressIPCriteriaDestPortValue2 or tSapIngressIPCriteriaDestPortOperator is set to non-default values.

OBJECT-TYPE

information about all sap-ingress policies' MAC criteria entries.

OBJECT-TYPE

Information about a particular MAC criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressMacCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.

OBJECT-TYPE

OBJECT-TYPE

The type of mac frame for which we are defining this match criteria.

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.

OBJECT-TYPE

the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.

OBJECT-TYPE

the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.

OBJECT-TYPE

the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.

OBJECT-TYPE

the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.

OBJECT-TYPE

the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.

OBJECT-TYPE

whether to match snap-oui, and what to match.

OBJECT-TYPE

timestamp of last change to this row in tSapIngressMacCriteriaTable.

OBJECT-TYPE

The value of tSapIngressMacCriteriaAtmVci specifies ATM VC Identifier to match as part of the MAC criteria for this SAP on the ingress. An inconsistentValue error is returned if this object is set when tSapIngressMacCriteriaFrameType is not set to 'atm'.

OBJECT-TYPE

The value of tSapIngressMacCritInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no VLAN tag matching will be performed.

OBJECT-TYPE

The value of tSapIngressMacCritInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tSapIngressMacCritInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.

OBJECT-TYPE

The value of tSapIngressMacCritOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed.

OBJECT-TYPE

The value of tSapIngressMacCritOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tSapIngressMacCritOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.

OBJECT-TYPE

The value of tSapIngressMacCritActionPolicer specifies the policer identifier to be used for the traffic matching this MAC Criteria Entry. It provides the ability to direct specific traffic to a different SAP ingress policer (tSapIngressMacCritActionPolicer) independently from that configured for the traffic's FC in tSapIngressFCPolicer. This action policer will be referred to as a bypass-policer.

OBJECT-TYPE

This table maintains the mapping of a particular forwarding class traffic into the specified queue.

OBJECT-TYPE

Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.

OBJECT-TYPE

tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] A sub forwarding class mapping should exist in this table if any explicit match criteria in this SAP ingress QoS policy try to use it. However, it is not the same for the base forwarding classes.

OBJECT-TYPE

Row Status for this queue.

OBJECT-TYPE

The specific queue to be used for packets in this forwarding class. Default value for this object along with default value for tSapIngressFCQGrp implies that the default queues should be used. The value of objects tSapIngressFCQueue and tSapIngressFCQGrp should always be set together. When the value of tSapIngressFCQGrp is set to default and the value of tSapIngressFCQueue is set to non-default, then tSapIngressFCQueue references tSapIngressQueue. When the value of tSapIngressFCQGrp is set to non-default and the value of tSapIngressFCQueue is set to non-default, then tSapIngressFCQueue references tQosIngQueue.

OBJECT-TYPE

The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpMCast implies that the default queues should be used. The value of objects tSapIngressFCMCastQueue and tSapIngressFCQGrpMCast should always be set together. When the value of tSapIngressFCQGrpMCast is set to default and the value of tSapIngressFCMCastQueue is set to non-default, then tSapIngressFCQueue references tSapIngressQueue. When the value of tSapIngressFCQGrpMCast is set to non-default and the value of tSapIngressFCMCastQueue is set to non-default, then tSapIngressFCMCastQueue references tQosIngQueue.

OBJECT-TYPE

The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpBCast implies that the default queues should be used. The value of objects tSapIngressFCMCastQueue and tSapIngressFCQGrpMCast should always be set together. When the value of tSapIngressFCQGrpMCast is set to default and the value of tSapIngressFCMCastQueue is set to non-default, then tSapIngressFCQueue references tSapIngressQueue. When the value of tSapIngressFCQGrpMCast is set to non-default and the value of tSapIngressFCMCastQueue is set to non-default, then tSapIngressFCMCastQueue references tQosIngQueue.

OBJECT-TYPE

The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpUnknown implies that the default queues should be used. The value of objects tSapIngressFCUnknownQueue and tSapIngressFCQGrpUnknown should always be set together. When the value of tSapIngressFCQGrpUnknown is set to default and the value of tSapIngressFCUnknownQueue is set to non-default, then tSapIngressFCUnknownQueue references tSapIngressQueue. When the value of tSapIngressFCQGrpUnknown is set to non-default and the value of tSapIngressFCUnknownQueue is set to non-default, then tSapIngressFCUnknownQueue references tQosIngQueue.

OBJECT-TYPE

tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.

OBJECT-TYPE

tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues. When the value of tSapIngressFCInProfRemark is set to 'none', the values of tSapIngressFCInProfDscp and tSapIngressFCInProfPrec are set to default values. When the value of tSapIngressFCInProfRemark is set to 'dscp', the value of tSapIngressFCInProfDscp should be set to non-default value and the value of tSapIngressFCInProfPrec should be set to default value. When the value of tSapIngressFCInProfRemark is set to 'precedence', the value of tSapIngressFCInProfDscp should be set to default value and the value of tSapIngressFCInProfPrec should be set to non-default value.

OBJECT-TYPE

tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'.

OBJECT-TYPE

tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'.

OBJECT-TYPE

tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues. When the value of tSapIngressFCOutProfRemark is set to 'none', the values of tSapIngressFCOutProfDscp and tSapIngressFCOutProfPrec are set to default values. When the value of tSapIngressFCOutProfRemark is set to 'dscp', the value of tSapIngressFCOutProfDscp should be set to non-default value and the value of tSapIngressFCOutProfPrec should be set to default value. When the value of tSapIngressFCOutProfRemark is set to 'precedence', the value of tSapIngressFCOutProfDscp should be set to default value and the value of tSapIngressFCOutProfPrec should be set to non-default value.

OBJECT-TYPE

tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'.

OBJECT-TYPE

tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'.

OBJECT-TYPE

tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have their modes, tSapIngressQueueMode set to 'profile'.

OBJECT-TYPE

The value of the object tSapIngressFCHsmdaQueue specifies the HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of the object tSapIngressFCHsmdaMCastQueue specifies the multicast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of the object tSapIngressFCHsmdaBCastQueue specifies the broadcast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value of '1' are automatically classified as out-of-profile. Frames with DE value of '0' will continue to be policed based on the value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of ingress queue is within CIR, frames with DE=0 will be treated as in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these frames are treated as out-of-profile. When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action specified by the value of tSapIngressFCProfile.

OBJECT-TYPE

tSapIngressFCQGrp specifies the tQosIngQGroupName. The value of objects tSapIngressFCQueue and tSapIngressFCQGrp should always be set together. When the value of tSapIngressFCQGrp is set to default and the value of tSapIngressFCQueue is set to non-default, then tSapIngressFCQueue references tSapIngressQueue. When the value of tSapIngressFCQGrp is set to non-default and the value of tSapIngressFCQueue is set to non-default, then tSapIngressFCQueue references tQosIngQueue.

OBJECT-TYPE

tSapIngressFCQGrpMCast specifies the tQosIngQGroupName. The value of objects tSapIngressFCMCastQueue and tSapIngressFCQGrpMCast should always be set together. When the value of tSapIngressFCQGrpMCast is set to default and the value of tSapIngressFCMCastQueue is set to non-default, then tSapIngressFCMCastQueue references tSapIngressQueue. When the value of tSapIngressFCQGrpMCast is set to non-default and the value of tSapIngressFCMCastQueue is set to non-default, then tSapIngressFCMCastQueue references tQosIngQueue.

OBJECT-TYPE

tSapIngressFCQGrpBCast specifies the tQosIngQGroupName. The value of objects tSapIngressFCBCastQueue and tSapIngressFCQGrpBCast should always be set together. When the value of tSapIngressFCQGrpBCast is set to default and the value of tSapIngressFCBCastQueue is set to non-default, then tSapIngressFCBCastQueue references tSapIngressQueue. When the value of tSapIngressFCQGrpBCast is set to non-default and the value of tSapIngressFCBCastQueue is set to non-default, then tSapIngressFCBCastQueue references tQosIngQueue.

OBJECT-TYPE

tSapIngressFCQGrpUnknown specifies the tQosIngQGroupName. The value of objects tSapIngressFCUnknownQueue and tSapIngressFCQGrpUnknown should always be set together. When the value of tSapIngressFCQGrpUnknown is set to default and the value of tSapIngressFCUnknownQueue is set to non-default, then tSapIngressFCUnknownQueue references tSapIngressQueue. When the value of tSapIngressFCQGrpUnknown is set to non-default and the value of tSapIngressFCUnknownQueue is set to non-default, then tSapIngressFCUnknownQueue references tQosIngQueue.

OBJECT-TYPE

tSapIngressFCPolicer specifies the policer ID to be used for the normal traffic in this forwarding class.

OBJECT-TYPE

tSapIngressFCMCastPolicer specifies the policer ID to be used for multicast in this forwarding class.

OBJECT-TYPE

tSapIngressFCBCastPolicer specifies the policer ID to be used for broadcast traffic in this forwarding class.

OBJECT-TYPE

tSapIngressFCUnknownPolicer specifies the policer ID to be used for unknown traffic in this forwarding class.

OBJECT-TYPE

The value of tSapIngressFCPlcrFPQGrp specifies whether to use the specified policer defined in FP(forwarding-plane) Queue group for this SAP. When tSapIngressFCPlcrFPQGrp is set to 'true', it specifies the FC to use the specific policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.

OBJECT-TYPE

The value of tSapIngressFCMCastPlcrFPQGrp specifies whether to use the specified multicast policer defined in FP(forwarding-plane) Queue group for this SAP. When tSapIngressFCMCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific multicast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCMCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.

OBJECT-TYPE

The value of tSapIngressFCBCastPlcrFPQGrp specifies whether to use the specified broadcast policer defined in FP(forwarding-plane) Queue group for this SAP. When tSapIngressFCBCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCBCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.

OBJECT-TYPE

The value of tSapIngressFCUnknownPlcrFPQGrp specifies whether to use the specified unknown policer defined in FP(forwarding-plane) Queue group for this SAP. When tSapIngressFCUnknownPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCUnknownPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.

OBJECT-TYPE

The value of tSapIngressFCEgressOverrideFC specifies the forwarding class that overrides the forwarding class determined by ingress classification. The forwarding class and/or forwarding sub-class can be overridden. The new egress forwarding class is applicable to both SAP egress and network egress.

OBJECT-TYPE

This table maintains the mapping of a particular precedence value into a forwarding class

OBJECT-TYPE

Information about a particular sap-ingress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.

OBJECT-TYPE

Precedence value for which the mapping is done.

OBJECT-TYPE

Row Status for this mapping.

OBJECT-TYPE

tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressPrecFC is specified explicitly, this match will be ignored for classification purposes.

OBJECT-TYPE

The priority to be assigned to the matching traffic.

OBJECT-TYPE

timestamp of last change to this row in tSapIngressPrecTable.

OBJECT-TYPE

The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

Information about all sap-ingress policies' IPv6 criteria entries.

OBJECT-TYPE

Information about a particular IPv6 criteria entry for a sap-ingress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPv6CriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source IPv6 of the packet.

OBJECT-TYPE

If different from 0, the object tSapIngressIPv6CriteriaSourceIpMask specifies the IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received source IPv6 address to match the tSapIngressIPv6CriteriaSourceIpAddr. If the value of tSapIngressIPv6CriteriaSourceIpMask is 0, and the value of tSapIngressIPv6CritSrcIpFullMask is non zero then the value of tSapIngressIPv6CritSrcIpFullMask is used as mask. If the value of tSapIngressIPv6CriteriaSourceIpMask is non zero, it will be equal to the mask expressed the object tSapIngressIPv6CritSrcIpFullMask. If both tSapIngressIPv6CriteriaSourceIpMask and tSapIngressIPv6CritSrcIpFullMask are set to 0, not matching is done on the source Ip address. If a value is specified for this object, then the value of the object tSapIngressIPv6CritSrcIpFullMask will be set to reflect this same mask.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destinationp IPv6 of the packet.

OBJECT-TYPE

If different from 0, the object tSapIngressIPv6CriteriaDestIpMask specifies the IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received Destination IPv6 address to match the tSapIngressIPv6CriteriaDestIpAddr. If the value of tSapIngressIPv6CriteriaDestIpMask is 0, and the value of tSapIngressIPv6CritDstIpFullMask is non zero then the value of tSapIngressIPv6CritDstIpFullMask is used as mask. If the value of tSapIngressIPv6CriteriaDestIpMask is non zero, it will be equal to the mask expressed the object tSapIngressIPv6CritDstIpFullMask. If both tSapIngressIPv6CriteriaDestIpMask and tSapIngressIPv6CritDstIpFullMask are set to 0, no matching is done on the Destination Ip address. If a value is specified for this object, then the value of the object tSapIngressIPv6CritDstIpFullMask will be set to reflect this same mask.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator. This object cannot set to non-default value, if the value of tSapIngressIPv6CritVxlanVniVal1, tSapIngressIPv6CritVxlanVniVal2 or tSapIngressIPv6CritVxlanVniOper is set to non-default values. The value of tSapIngressIPv6CriteriaSourcePortOperator and tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator. This object cannot set to non-default value, if the value of tSapIngressIPv6CritVxlanVniVal1, tSapIngressIPv6CritVxlanVniVal2 or tSapIngressIPv6CritVxlanVniOper is set to non-default values. The value of tSapIngressIPv6CriteriaSourcePortOperator and tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used. This object cannot set to non-default value, if the value of tSapIngressIPv6CritVxlanVniVal1, tSapIngressIPv6CritVxlanVniVal2 or tSapIngressIPv6CritVxlanVniOper is set to non-default values. The value of tSapIngressIPv6CriteriaSourcePortOperator and tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator. This object cannot set to non-default value, if the value of tSapIngressIPv6CritVxlanVniVal1, tSapIngressIPv6CritVxlanVniVal2 or tSapIngressIPv6CritVxlanVniOper is set to non-default values. The value of tSapIngressIPv6CriteriaDestPortOperator and tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator. This object cannot set to non-default value, if the value of tSapIngressIPv6CritVxlanVniVal1, tSapIngressIPv6CritVxlanVniVal2 or tSapIngressIPv6CritVxlanVniOper is set to non-default values. The value of tSapIngressIPv6CriteriaDestPortOperator and tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used. This object cannot set to non-default value, if the value of tSapIngressIPv6CritVxlanVniVal1, tSapIngressIPv6CritVxlanVniVal2 or tSapIngressIPv6CritVxlanVniOper is set to non-default values. The value of tSapIngressIPv6CriteriaDestPortOperator and tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet

OBJECT-TYPE

The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable.

OBJECT-TYPE

If different from 0, the object tSapIngressIPv6CritSrcIpFullMask specifies the IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received Source IPv6 address to match the tSapIngressIPv6CriteriaSourceIpAddr. If the value of tSapIngressIPv6CriteriaSourceIpMask is non zero, it will be equal to the mask expressed in the object tSapIngressIPv6CritSrcIpFullMask. If both tSapIngressIPv6CriteriaSourceIpMask and tSapIngressIPv6CritSrcIpFullMask are set to 0, no matching is done on the Source IPv6 address. If a regular mask is specified for tSapIngressIPv6CritSrcIpFullMask then the value of tSapIngressIPv6CriteriaSourceIpMask will be changed to reflect this value.

OBJECT-TYPE

If different from 0, the object tSapIngressIPv6CritDstIpFullMask specifies the IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the received Dest IPv6 address to match the tSapIngressIPv6CriteriaDestIpAddr. If the value of tSapIngressIPv6CriteriaDestIpMask is non zero, it will be equal to the mask expressed in the object tSapIngressIPv6CritDstIpFullMask. If both tSapIngressIPv6CriteriaDestIpMask and tSapIngressIPv6CritDstIpFullMask are set to 0, no matching is done on the Dest IPv6 address. If a regular mask is specified for tSapIngressIPv6CritDstIpFullMask then the value of tSapIngressIPv6CriteriaDestIpMask will be changed to reflect this value.

OBJECT-TYPE

The value of tSapIngressIPv6CritActionPolicer specifies the policer identifier to be used for the traffic matching this IPv6 Criteria Entry. It provides the ability to direct specific traffic to a different SAP ingress policer (tSapIngressIPv6CritActionPolicer) independently from that configured for the traffic's FC in tSapIngressFCPolicer. This action policer will be referred to as a bypass-policer. An 'inconsistentValue' error is returned if tSapIngressIPv6CritActionPolicer is set to a non-default value when tSapIngressIPv6CriteriaRowStatus is set to not in service.

OBJECT-TYPE

The value of tSapIngressIPv6CriteriaFragment specifies matching criteria to be used for fragmented or non-fragmented IPv6 packtes. off (1) - match all IPv6 packets regardless of fragmented or not. false (2) - match all non-fragmented IPv6 packets. true (3) - match all fragmented IPv6 packets. firstOnly (4) - match only the initial IPv6 packet fragment. nonFirstOnly (5) - match non-initial IPv6 packet fragment.

OBJECT-TYPE

The value of tSapIngressIPv6CritVxlanVniVal1 specifies the VNI identifier of the VXLAN to be used for the traffic matching. The value of 0 indicates that the Vxlan Vni classification is disabled. This value can be set to non-default value when the value of tSapIngressIPv6CriteriaNextHeader is set to 'udp' and tSapIngressIPv6CritType is set to 'vxlanVni (2)'. This object cannot set to non-default value, if the values of tSapIngressIPv6CriteriaSourcePortValue1, tSapIngressIPv6CriteriaSourcePortValue2 or tSapIngressIPv6CriteriaSourcePortOperator and tSapIngressIPv6CriteriaDestPortValue1, tSapIngressIPv6CriteriaDestPortValue2 or tSapIngressIPv6CriteriaDestPortOperator are set to non-default values.

OBJECT-TYPE

The value of tSapIngressIPv6CritVxlanVniVal2 specifies the VNI identifier of the VXLAN to be used for the traffic matching. The value of 0 indicates that the Vxlan Vni classification is disabled. This value can be set to non-default value when the value of tSapIngressIPv6CriteriaNextHeader is set to 'udp' and tSapIngressIPv6CritType is set to 'vxlanVni (2)'. This object cannot set to non-default value, if the values of tSapIngressIPv6CriteriaSourcePortValue1, tSapIngressIPv6CriteriaSourcePortValue2 or tSapIngressIPv6CriteriaSourcePortOperator and tSapIngressIPv6CriteriaDestPortValue1, tSapIngressIPv6CriteriaDestPortValue2 or tSapIngressIPv6CriteriaDestPortOperator are set to non-default values.

OBJECT-TYPE

The value of tSapIngressIPv6CritVxlanVniOper operator specifies the manner in which tSapIngressIPv6CritVxlanVniVal1 and tSapIngressIPv6CritVxlanVniVal2 are to be used: Operator Value1 Value2 ---------------------------------------------------- none (0) Any(0) Any(0) eq (1) Specified Val1 Any(0) range(2) Starting Val1 Ending Val2 'Any(0)' specifies that, this object can accept any values but would default to 0. This object cannot set to non-default value, if the value of tSapIngressIPCriteriaSourcePortValue1, tSapIngressIPCriteriaSourcePortValue2 or tSapIngressIPCriteriaSourcePortOperator and tSapIngressIPCriteriaDestPortValue1, tSapIngressIPCriteriaDestPortValue2 or tSapIngressIPCriteriaDestPortOperator is set to non-default values.

OBJECT-TYPE

The value of tSapIngIPv6CritSrcIpPrefixList specifies the IP prefix list used as match criterion for the source ip address. The value specified for this object must correspond to a prefix list defined in tQosPrefixListTable. If the value of this object is empty then the values of the objects tSapIngressIPv6CriteriaSourceIpAddr and tSapIngressIPv6CriteriaSourceIpMask or tSapIngressIPv6CritSrcIpFullMask are used as source ip address match criterion. When this object is set to a non-empty value then the objects tSapIngressIPv6CriteriaSourceIpAddr, tSapIngressIPv6CriteriaSourceIpMask and tSapIngressIPv6CritSrcIpFullMask are reset to their default values by the system. Vice versa, when a new (non-default) value is provided for the objects tSapIngressIPv6CriteriaSourceIpAddr and tSapIngressIPv6CriteriaSourceIpMask or tSapIngressIPv6CritSrcIpFullMask then this object is reset to its default (empty) value by the system. An attempt to set tSapIngIPv6CritSrcIpPrefixList to a non-default value in combination with setting any of tSapIngressIPv6CriteriaSourceIpAddr and tSapIngressIPv6CriteriaSourceIpMask or tSapIngressIPv6CritSrcIpFullMask to (a) non-default value(s) is rejected by the system.

OBJECT-TYPE

The value of tSapIngIPv6CritDstIpPrefixList specifies the IP prefix list used as match criterion for the destination ip address. The value specified for this object must correspond to a prefix list defined in tQosPrefixListTable. If the value of this object is empty then the values of the objects tSapIngressIPv6CriteriaDestIpAddr and tSapIngressIPv6CriteriaDestIpMask or tSapIngressIPv6CritDstIpFullMask are used as destination ip address match criterion. When this object is set to a non-empty value then the objects tSapIngressIPv6CriteriaDestIpAddr, tSapIngressIPv6CriteriaDestIpMask and tSapIngressIPv6CritDstIpFullMask are reset to their default values by the system. Vice versa, when a new (non-default) value is provided for the objects tSapIngressIPv6CriteriaDestIpAddr and tSapIngressIPv6CriteriaDestIpMask or tSapIngressIPv6CritDstIpFullMask then this object is reset to its default (empty) value by the system. An attempt to set tSapIngIPv6CritDstIpPrefixList to a non-default value in combination with setting any of tSapIngressIPv6CriteriaDestIpAddr and tSapIngressIPv6CriteriaDestIpMask or tSapIngressIPv6CritDstIpFullMask to (a) non-default value(s) is rejected by the system

OBJECT-TYPE

Information about all sap-ingress policies' HSMDA queues. This table is obsoleted in 10.0 release.

OBJECT-TYPE

Information about a particular HSMDA queue for a sap-ingress policy. Entries are created by user.

OBJECT-TYPE

The HSMDA queue ID is used as the secondary index to the table entry.

OBJECT-TYPE

The value of tSapIngressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapIngressHsmdaQueueTable.

OBJECT-TYPE

The value of tSapIngressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapIngressHsmdaQueueTable.

OBJECT-TYPE

The value of tSapIngressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tSapIngressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tSapIngressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.

OBJECT-TYPE

The value of tSapIngressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user.

OBJECT-TYPE

The value of tSapIngressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.

OBJECT-TYPE

The value of tSapIngressHsmdaQueuePoliced specifies whether the out of profile traffic feeding into the physical queue instance should be dropped. When the value is 'true', out-of-profile packets are discarded. This policing function is different than the shaping function normally performed by the queues defined rate in that scheduling is not stopped for the queue when the rate is exceeded. Accordingly, tSapIngressHsmdaQueuePoliced overrides the bandwidth specified by the object tSapIngressHsmdaQueueAdminCIR.

OBJECT-TYPE

This table maintains the mappings of an Lsp Exp Bit value into a forwarding class

OBJECT-TYPE

Information about a particular sap-ingress policy's Lsp Exp Bit values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of the object tSapIngressLspExpValue specifies the value for which the mapping is done.

OBJECT-TYPE

The value of tSapIngressLspExpRowStatus specifies the Row Status for this mapping.

OBJECT-TYPE

The value of tSapIngressLspExpLastChanged indicates the timestamp of last change to this row in tSapIngressLspExpTable.

OBJECT-TYPE

The value of the object tSapIngressLspExpFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressLspExpFC is specified explicitly, this match will be ignored for classification purposes.

OBJECT-TYPE

The value of the object tSapIngressLspExpFCPriority specifies the priority to be assigned to the matching traffic.

OBJECT-TYPE

The value of the object tSapIngressLspExpHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

tSapIngPolicerTable defines SAP Ingress Policer Table for providing, via SNMP, the capability of defining the policers. tSapIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.

OBJECT-TYPE

tSapIngPolicerEntry defines an entry in the tSapIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapIngPolicerRowStatus.

OBJECT-TYPE

tSapIngPolicerId defines the SAP Ingress Policer identifier. It identifies an sap-ingress policer in the managed system.

OBJECT-TYPE

tSapIngPolicerRowStatus allows entries to be created and deleted in the tSapIngPolicerTable.

OBJECT-TYPE

tSapIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.

OBJECT-TYPE

tSapIngPolicerDescr specifies the description of the policer.

OBJECT-TYPE

The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

tSapIngPolicerParent specifies the scheduler to which this queue would be feeding.

OBJECT-TYPE

tSapIngPolicerLevel specifies the level of priority while feeding the parent.

OBJECT-TYPE

tSapIngPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.

OBJECT-TYPE

tSapIngPolicerAdminPIR specifies the administrative PIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngPolicerAdminPIRHi and tSapIngPolicerAdminPIRLo objects.

OBJECT-TYPE

tSapIngPolicerAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapIngPolicerAdminCIRHi and tSapIngPolicerAdminCIRLo objects.

OBJECT-TYPE

tSapIngPolicerStatMode specifies the mode of statistics collected by this policer.

OBJECT-TYPE

The tSapIngPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.

OBJECT-TYPE

The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.

OBJECT-TYPE

The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.

OBJECT-TYPE

tSapIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.

OBJECT-TYPE

The administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.

OBJECT-TYPE

The administrative CIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.

OBJECT-TYPE

The value of tSapIngPolicerRateType specifies the type of ingress policer rate. When the value of the object is set to 'kbps', the ingresss policer rates are specified in kbps. The objects tSapIngPolicerAdminPIRPercent and tSapIngPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit' or 'percentReferPortLimit', the ingress policer rates are specified in percentage. The objects tSapIngPolicerAdminPIR and tSapIngPolicerAdminCIR will be set to their default values.

OBJECT-TYPE

The value of tSapIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The value of tSapIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapIngPolicerSlopeStartDepth up to the tSapIngPolicerSlopeMaxProb at the tSapIngPolicerSlopeMaxDepth. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The value of tSapIngPolicerSlopeMap specifies the slope map to be used with this policer. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The value of tSapIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.

OBJECT-TYPE

The value of tSapIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tSapIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.

OBJECT-TYPE

The value of tSapIngPolicerAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIngPolicerAdminPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngPolicerAdminPIRHi along with the value of tSapIngPolicerAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapIngPolicerAdminPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapIngPolicerAdminPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngPolicerAdminPIRHi along with the value of tSapIngPolicerAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapIngPolicerAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIngPolicerAdminCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngPolicerAdminCIRHi along with the value of tSapIngPolicerAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapIngPolicerAdminCIRLo specifies the lower 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapIngPolicerAdminCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapIngPolicerAdminCIRHi along with the value of tSapIngPolicerAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

A table that contains SAP ingress policy name information. Entries are created automatically by the system when tSapIngressPolicyName object is set for the SAP ingress policy.

OBJECT-TYPE

Basic information about a specific SAP ingress policy name.

OBJECT-TYPE

The value of the object tSapIngPolicyNameId indicates the policy name associated with this SAP ingress policy.

OBJECT-TYPE

This value of the object tSapIngPolicyNameRowStatus indicates the status of this row.

OBJECT-TYPE

The value of tSapIngPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The tSapIngDynamicCfgTable has an entry for each Sap Ingress QoS Policy.

OBJECT-TYPE

The value of tSapIngDynamicCfgEntry represents information about a particular Sap Ingress QoS Policy. Sap Ingress policy (1) is the default entry and created by the agent, while all other entries are created by user. Default Entry cannot be modified/deleted. The other entries can be modified/deleted are deleted by user.

OBJECT-TYPE

The value of tSapIngDynamicCfgLastChanged indicates the sysUpTime at the time of the last modification of this row.

OBJECT-TYPE

The value of tSapIngSharedPccRuleInsertPoint specifies the place at which the pcc-rule IP criteria entries that are received from Diameter and that are shared across several hosts will be inserted in the policy. The range defined here will be reserved for those entries; no other entries will be allowed in this range. The value of zero means that no pcc-rule IP criteria entries can be inserted in the policy by Diameter. If tSapIngSharedPccRuleInsertSize is set to zero, then tSapIngSharedPccRuleInsertPoint is also set to zero by the system. Note that the range reserved for pcc-rule entries is the same for IPv4 criteria and IPv6 criteria.

OBJECT-TYPE

The value of tSapIngSharedPccRuleInsertSize specifies how many pcc-rule IP criteria entries that are received from Diameter and that are shared across several hosts can be inserted in the policy. The range defined here will be reserved for those entries; no other entries will be allowed in this range. The value of zero means that no pcc-rule IP criteria entries can be inserted in the policy by Diameter. If tSapIngSharedPccRuleInsertPoint is set to zero, then tSapIngSharedPccRuleInsertSize is also set zero by the system. Note that the range reserved for pcc-rule entries is the same for IPv4 criteria and IPv6 criteria.

OBJECT-TYPE

The value of the object tSapIngSharedPccRuleNbrInsert indicates how many pcc-rule IP criteria entries received from Diameter have been inserted in this policy.

OBJECT-TYPE

The value of the object tSapIngSharedPccRuleNbrPolicy indicates how many pcc-rule shared policies are currently created based on this policy.

OBJECT-TYPE

The value of tSapIngDynamicPolicerInsertPoint specifies the place at which the dynamic policers required for pcc-rule IP criteria entries that are received from Diameter and that are shared across several hosts will be inserted in the policy. The range defined here will be reserved for those dynamic policers; no other policers will be allowed in this range. The value of 0 means that no dynamic policers can be inserted in the policy by Diameter. If tSapIngDynamicPolicerInsertSize is set to zero, then tSapIngDynamicPolicerInsertPoint is also set zero by the system. Note that the range reserved for pcc-rule dynamic policers is the same for IPv4 criteria and IPv6 criteria.

OBJECT-TYPE

The value of tSapIngDynamicPolicerInsertSize specifies how many dynamic policers required for pcc-rule IP criteria entries that are received from Diameter and that are shared across several hosts can be inserted in the policy. The range defined here will be reserved for those dynamic policers; no other policers will be allowed in this range. The value of zero means that no dynamic policers can be inserted in the policy by Diameter. If tSapIngDynamicPolicerInsertSize is set to zero, then tSapIngDynamicPolicerInsertPoint is also set zero by the system. Note that the range reserved for pcc-rule dynamic policers is the same for IPv4 criteria and IPv6 criteria.

OBJECT-TYPE

The value of the object tSapIngDynamicPolicerNbrInsert indicates how many dynamic policers required for pcc-rule IP criteria entries received from Diameter have been inserted in this policy.

OBJECT-TYPE

The value of tSapIngDynamicPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.

OBJECT-TYPE

The value of tSapIngDynamicPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.

OBJECT-TYPE

The value of tSapIngDynamicPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.

OBJECT-TYPE

The value of tSapIngDynamicPolicerParent specifies the arbiter to which this policer would be feeding.

OBJECT-TYPE

The value of tSapIngDynamicPolicerLevel specifies the level of priority while feeding the parent.

OBJECT-TYPE

The value of tSapIngDynamicPolicerWeight specifies the weight that needs to be used by the arbiter to which this policer would be feeding.

OBJECT-TYPE

The value of tSapIngDynamicPolicerStatMode specifies the mode of statistics collected by this policer.

OBJECT-IDENTITY

OBJECT-TYPE

information about all sap-egress policies.

OBJECT-TYPE

Information about a particular sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. the default sap-egress policy (1) cannot be changed or destroyed.

OBJECT-TYPE

The value of tSapEgressIndex uniquely identifies sap-egress QoS policy. User configured policies can only have values between (1..65535). All other values are reserved for system generated policies.

OBJECT-TYPE

Row Status of this policy's entry.

OBJECT-TYPE

scope of the sap-egress policy.

OBJECT-TYPE

user-supplied description of this sap-egress policy.

OBJECT-TYPE

timestamp of last change to this row in tSapEgressTable.

OBJECT-TYPE

The value of tSapEgressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting.

OBJECT-TYPE

The value of tSapEgressMatchCriteria indicates which type of match criteria the policy should use. When tSapEgressMatchCriteria has a value of 'ip', the sap-egress policy looks for match entries in tSapEgrIPCritTable. The value of tSapEgressMatchCriteria is set when the first match criteria table entry is created. The value of tSapEgressMatchCriteria is set to 'none' when the last criteria table entry is removed.

OBJECT-TYPE

The value of tSapEgressHsmdaWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy to use.

OBJECT-TYPE

The value of tSapEgressHsmdaLowBrstMaxCls specifies which class should use the low priority burst threshold. All classes starting from 1, up to and including that specified by tSapEgressHsmdaLowBrstMaxCls use the low priority burst threshold. All classes greater than the value of tSapEgressHsmdaLowBrstMaxCls up to and including class 8 use the high priority burst threshold.

OBJECT-TYPE

The value of tSapEgressPolicyName specifies the name to associate with this policy.

OBJECT-TYPE

The value of tSapEgressEthernetCtag specifies the tag from which the dot1p and DE (Drop-Eligible) values will be drawn to be used by all tSapEgressDot1pEntry objects related to this policy. The value 'true' specifies that the top customer tag will be used for egress reclassification based on dot1p criteria. The value 'false' specifies that a service delimiting tag will be used for egress reclassification based on dot1p criteria.

OBJECT-TYPE

The value of the object tSapEgressParentLocation specifies the location in which queues will look to find their parent scheduler; in case the parent scheduler is not found, the queue will be orphaned. The value of tSapEgressParentLocation applies to all queues in this sap-egress policy which have parents configured; for queues with no parent configured (or which are port-parented), tSapEgressParentLocation has no effect. The value 'default' specifies that the queues should look for their parent in the default way; i.e. SAP queues will look for their parents in the SAP's egress scheduler policy or the multi-service-site's egress scheduler policy depending on which is configured and Subscriber queues will look for their parents in the subscriber profile's egress scheduler policy. The value 'sla' specifies that the queues should look for their parent in the SLA-profile's egress scheduler policy; all queues that are not port-parented and to which SLA-profile is not applicable will behave as orphans in this case.

OBJECT-TYPE

The value of tSapEgressPolicersHqosManageable specifies whether the policers within this sap-egress policy are to be managed by the Hierarchical QoS process when this policy is applied to egress SAP or egress SLA-profile.

OBJECT-TYPE

The value of tSapEgressIsPolicyActive indicates whether this policy is active or not, i.e., whether this policy is currently consuming a forwarding plane (FP) resource on at least one FP in the system.

OBJECT-TYPE

The value of tSapEgressPostPlcrMappingPlcy specifies the post policer mapping policy being applied to this policy.

OBJECT-TYPE

The value of tSapEgressHsAttachPlcy specifies the HS attachment policy defined in tHsAttachPlcyTable.

OBJECT-TYPE

information about all sap-egress policies' queues.

OBJECT-TYPE

Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted.

OBJECT-TYPE

Row Status of the entry.

OBJECT-TYPE

The scheduler to which this queue would be feeding to.

OBJECT-TYPE

This specifies the level of priority while feeding to the parent.

OBJECT-TYPE

The weight that needs to be used by the scheduler to which this queue would be feeding to.

OBJECT-TYPE

This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.

OBJECT-TYPE

The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.

OBJECT-TYPE

tSapEgressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.

OBJECT-TYPE

The amount of reserved buffer space (in kilobytes) for the queue.

OBJECT-TYPE

The maximum amount of buffer space (in kilobytes) allowed for the queue. This object has been replaced with tSapEgressQueueMBSBytes object.

OBJECT-TYPE

The percentage of buffer space for the queue, used exclusively by high priority packets. This object is obsoleted in 15.0 release and has been replaced with tSapEgrQDrpTailLowReductnMbs object.

OBJECT-TYPE

The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The administrative PIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapEgressQueueAdminPIRHi and tSapEgressQueueAdminPIRLo objects.

OBJECT-TYPE

The administrative CIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapEgressQueueAdminCIRHi and tSapEgressQueueAdminCIRLo objects.

OBJECT-TYPE

The administrative PIR specified by the user.

OBJECT-TYPE

The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.

OBJECT-TYPE

timestamp of last change to this row in tSapEgressQueueTable.

OBJECT-TYPE

The value of the object tSapEgressQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tSapEgressQueueParent. Only one kind of parent is allowed.

OBJECT-TYPE

The value of the object tSapEgressQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. An 'inconsistentValue' error is returned if the value of tSapEgressQueuePortLvl is set to non-default value when the value of object tSapEgressQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tSapEgressQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. An 'inconsistentValue' error is returned if the value of tSapEgressQueuePortWght is set to non-default value when the value of object tSapEgressQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tSapEgressQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. An 'inconsistentValue' error is returned if the value of tSapEgressQueuePortCIRLvl is set to non-default value when the value of object tSapEgressQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tSapEgressQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. An 'inconsistentValue' error is returned if the value of tSapEgressQueuePortCIRWght is set to non-default value when the value of object tSapEgressQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of tSapEgressQueuePortAvgOverhead specifies the encapsulation overhead, in centipercent, used to translate packet-based rate to frame-based rate and vice versa.

OBJECT-TYPE

The value of tSapEgressQueuePoolName specifies the name of the pool to be applied for SAP egress queue.

OBJECT-TYPE

The value of tSapEgressQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning. This object is obsoleted in 14.0 release and replaced by tSapEgressQueueWredQMode.

OBJECT-TYPE

The value of tSapEgressQueueXPWredQSlope specifies the name of the slope policy to be applied for SAP egress queue. An 'inconsistentValue' error is returned when this object is set to a non-default value when tSapEgressQueueXPWredQ is set to 'false'.

OBJECT-TYPE

The maximum amount of buffer space (in bytes) allowed for the queue.

OBJECT-TYPE

The value of tSapEgressQueueBurstLimit specifies the explicit shaping burst size of a queue.

OBJECT-TYPE

The value of tSapEgressQueuePktOffset specifies the per packet byte offset for this queue.

OBJECT-TYPE

The administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminPIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.

OBJECT-TYPE

The administrative CIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminCIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.

OBJECT-TYPE

The value of tSapEgressQueueRateType specifies the type of Egress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapEgressQueueAdminCIRPercent and tSapEgressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit' or 'percentReferPortLimit', the egress queue rates are specified in percentage. The objects tSapEgressQueueAdminCIR and tSapEgressQueueAdminPIR will be set to their default values.

OBJECT-TYPE

The value of tSapEgressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.

OBJECT-TYPE

The value of tSapEgressQueueHiLowPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority (exceed-profile) packets. This object is obsoleted in 15.0 release and has been replaced with tSapEgrQDrpTailExcdReductnMbs object.

OBJECT-TYPE

The value of tSapEgressQueueWredQMode specifies the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes. When the value of this object is set to 'native (1)', the queues draw buffers from FP megapool. When the value of this object is set to 'poolPerQueue (2)', the queues draw buffers from a dedicated buffer pool per queue. The value of tSapEgressQueueWredQSlopeUsage can be set to 'default (1)', when the value of tSapEgressQueueWredQMode is set to 'poolPerQueue (2)' and the value of tSapEgressQueueWredQSlopeUsage can be set to 'exceedLow (2)', when the value of tSapEgressQueueWredQMode is set to 'native (1)'.

OBJECT-TYPE

The value of tSapEgressQueueWredQSlopeUsage specifies which slopes are active for given slope-mode specified by tSapEgressQueueWredQMode. When the value of this object is set to 'default (1)', the traffic is subjected to slopes configured under tSlopePolicyTable. When the value of this object is set to 'exceedLow (2)', the traffic is subjected to two slopes (low and exceed) configured under tSlopePolicyTable and a drop tail. The value of tSapEgressQueueWredQSlopeUsage can be set to 'default (1)', when the value of tSapEgressQueueWredQMode is set to 'poolPerQueue (2)' and the value of tSapEgressQueueWredQSlopeUsage can be set to 'exceedLow (2)', when the value of tSapEgressQueueWredQMode is set to 'native (1)'.

OBJECT-TYPE

The value of tSapEgrQDrpTailExcdReductnMbs specifies the percentage at which exceed drop tail is being reduced from the MBS specified by tSapEgressQueueMBSBytes.

OBJECT-TYPE

The value of tSapEgrQDrpTailHiPlusReductnMbs specifies the percentage at which highplus drop tail is being reduced from the MBS specified by tSapEgressQueueMBSBytes.

OBJECT-TYPE

The value of tSapEgrQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by tSapEgressQueueMBSBytes.

OBJECT-TYPE

The value of tSapEgrQDrpTailHighReductnMbs specifies the percentage at which high drop tail is being reduced from the MBS specified by tSapEgressQueueMBSBytes.

OBJECT-TYPE

The value of tSapEgressQueueAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapEgressQueueAdminPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapEgressQueueAdminPIRHi along with the value of tSapEgressQueueAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapEgressQueueAdminPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapEgressQueueAdminPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapEgressQueueAdminPIRHi along with the value of tSapEgressQueueAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapEgressQueueAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapEgressQueueAdminCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapEgressQueueAdminCIRHi along with the value of tSapEgressQueueAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapEgressQueueAdminCIRLo specifies the lower 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapEgressQueueAdminCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapEgressQueueAdminCIRHi along with the value of tSapEgressQueueAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapEgressQueueHsWrrWeight specifies the Weighted Round Robin (WRR) weight which this queue should parent into the scheduler. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.

OBJECT-TYPE

The value of tSapEgressQueueHsClassWeight specifies the weight of the scheduling class.

OBJECT-TYPE

The value of tSapEgressQueueHsWredQSlopePlcy specifies the name of the slope policy to be applied for network-queue queue.

OBJECT-TYPE

The value of tSapEgressQueueHsAltClssPool specifies whether the HS alternate class port pool buffer should be used for traffic.

OBJECT-TYPE

OBJECT-TYPE

Information about a particular sap-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

forwarding class name.

OBJECT-TYPE

Row Status for this queue.

OBJECT-TYPE

The queue to use for packets in this forwarding class. When tSapEgressFCQGrp is set to its default value, tSapEgressFCQueue represents the local queue to which traffic will be forwarded. When tSapEgressFCQGrp and tSapEgressFCQGrpInstanceId are set to a non-default values, tSapEgressFCQueue represents the queue within the specified queue-group instance to which traffic will be forwarded.

OBJECT-TYPE

The value of tSapEgressFCDot1PValue specifies 802.1p value to use for packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects.

OBJECT-TYPE

timestamp of last change to this row in tSapEgressFCTable.

OBJECT-TYPE

The HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA.

OBJECT-TYPE

The value of the object tSapEgressFCDot1PHsmdaProfile specifies if the system will perform egress profiling on HSMDA queues or not. The tSapEgressFCDot1PHsmdaProfile object is obsoleted in 9.0 Release.

OBJECT-TYPE

The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCForceDEValue specifies the DE value to set for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDEMark object is set to 'false'.

OBJECT-TYPE

The value of tSapEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEValue object is not set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCInProfDscp specifies the DSCP name to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCInProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.

OBJECT-TYPE

The value of tSapEgressFCOutProfDscp specifies the DSCP name to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCOutProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.

OBJECT-TYPE

The value of tSapEgressFCInProfPrec specifies the precedence value to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.

OBJECT-TYPE

The value of tSapEgressFCOutProfPrec specifies the precedence value to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.

OBJECT-TYPE

The value of tSapEgressFCQGrp specifies the tQosEgrQGroupName. When set to non-default value, this indicates the name of the queue-group to which traffic will be forwarded. The values of both tSapEgressFCQGrp and tSapEgressFCQGrpInstanceId should be set to non-default values for the queue-group instance to be referenced for redirection at egress access port. An 'inconsistentValue' error is returned if tSapEgressFCQGrpFC and tSapEgressFCQGrpInstanceId are set to non-default values and tSapEgressFCPortQGrpQueue is also set to non-default value for another FC specified by tSapEgressFCName within the same SAP egress qos policy.

OBJECT-TYPE

The value of tSapEgressFCPolicer specifies the SAP Egress Policer identifier. If a corresponding Sap Egress Policer Id does not exist in tSapEgrPolicerTable, an 'inconsistentValue' error will be returned. When tSapEgressFCPolicer is set to its default value, then traffic for this forwarding class will not use policers. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to default, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a system determined queue-group queue. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a queue within the given queue-group according to the appropriate tQosEgrQGroupFCEntry. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to a non-default value, then traffic will use the given policer, and then feed into the given queue within the given queue-group. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set its default value, and tSapEgressFCQueue is set to a non-default value, then traffic will use the given policer, and then feed into the given local queue.

OBJECT-TYPE

The value of tSapEgressFCQGrpFC, when specified, will replace the forwarding class derived from ingress as the forwarding class to use inside the egress queue group. tSapEgressFCQGrpFC is only allowed to be used in conjunction with egress policers, and is mutually exclusive with direct queue-group queue mappings. An 'inconsistentValue' error is returned if tSapEgressFCQGrpFC is set to a non-default value when tSapEgressFCPolicer is set to default.

OBJECT-TYPE

The value of tSapEgressFCQGrpInstanceId defines the unique instance of the queue-group is instantiated at egress access port. It, along with tSapEgressFCQGrp, uniquely identifies egress access port queue-group instance to which the traffic will be forwarded

OBJECT-TYPE

The value of tSapEgressFCPortQGrpQueue specifies whether to use the queue specified in egress access port queue-group instance for this SAP. With tSapEgressFCQueue set to non-default value, tSapEgressFCPortQGrpQueue set to non-default value and tSapEgressFCPolicer set to default value, it specifies this FC traffic to use the tSapEgressFCQueue in the egress access port queue group instance (TIMETRA-SAP-MIB::sapEgressPortQGrp, sapEgressPortQGrpInstanceId) attached to the SAP. With tSapEgressFCPolicer set to non-default value, tSapEgressFCPortQGrpQueue set to non-default value and tSapEgressFCQueue set to default value , it specifies this FC traffic to use the local policer and then feed into the queue within the egress access port queue-group instance (TIMETRA-SAP-MIB::sapEgressPortQGrp, sapEgressPortQGrpInstanceId) attached to the SAP. With tSapEgressFCPolicer set to non-default value, tSapEgressFCPortQGrpQueue set to non-default value and tSapEgressFCQueue set to non-default value, it specifies this FC traffic to use the local policer and then feed into tSapEgressFCQueue within the egress access port queue-group instance (TIMETRA-SAP-MIB::sapEgressPortQGrp, sapEgressPortQGrpInstanceId) attached to the SAP. An 'inconsistentValue' error is returned if this object is set to non-default value and tSapEgressFCQGrp and tSapEgressFCQGrpInstanceId are also set to non-default value for another FC specified by tSapEgressFCName within the same SAP egress qos policy. An 'inconsistentValue' error is returned if tSapEgressFCQGrp is set to a non-default value and an entry corresponding to the queue tSapIngressFCQueue does not exist in Queue group instance attached at the port.

OBJECT-TYPE

The value of tSapEgressFCHsmdaQueuePortQGrpQ specifies whether to use the queue specified in egress queue-group template. When tSapEgressFCHsmdaQueuePortQGrpQ is set to non-default value, it specifies this FC traffic to use the queue specified by tQosEgrHsmdaQueue in Queue-Group template.

OBJECT-TYPE

The value of tSapEgressFCOuterTagDot1PInProf specifies 802.1p value to set in the outer VLAN tag of the packet for in-profile frames in this forwarding class. An 'inconsistentValue' error is returned if this object is set to any value other than '-1', when tSapEgressFCOuterTagDot1POutProf object is set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCOuterTagDot1POutProf specifies 802.1p value to set in the outer VLAN tag of the packet for out-profile frames in this forwarding class. An 'inconsistentValue' error is returned if this object is set to any value other than '-1', when tSapEgressFCOuterTagDot1PInProf object is set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCInnerTagDot1PInProf specifies 802.1p value to set in the inner VLAN tag of the packet for in-profile frames in this forwarding class. An 'inconsistentValue' error is returned if this object is set to any value other than '-1', when tSapEgressFCInnerTagDot1POutProf object is set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCInnerTagDot1POutProf specifies 802.1p value to set in the inner VLAN tag of the packet for out-profile frames in this forwarding class. An 'inconsistentValue' error is returned if this object is set to any value other than '-1', when tSapEgressFCInnerTagDot1PInProf object is set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCOuterTagForceDEValue specifies the DE value to set in the outer VLAN tag of the packet for all the frames of this forwarding class regardless of frame's profile status. An 'inconsistentValue' error is returned if this object is set to any value other than '-1', when tSapEgressFCOuterTagDEMark object is set to 'false'.

OBJECT-TYPE

The value of tSapEgressFCOuterTagDEMark specifies whether to set DE value in the outer VLAN tag of the packet for all the frames of this forwarding class. An 'inconsistentValue' error is returned if this object is set to 'false', when tSapEgressFCOuterTagForceDEValue object is not set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCInnerTagForceDEValue specifies the DE value to set in the inner VLAN tag of the packet for all the frames of this forwarding class regardless of frame's profile status. An 'inconsistentValue' error is returned if this object is set to any value other than '-1', when tSapEgressFCInnerTagDEMark object is set to 'false'.

OBJECT-TYPE

The value of tSapEgressFCInnerTagDEMark specifies whether to set DE value in the inner VLAN tag of the packet for all the frames of this forwarding class. An 'inconsistentValue' error is returned if this object is set to 'false', when tSapEgressFCInnerTagForceDEValue object is not set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCDot1PExceedProf specifies 802.1p value to set for exceed-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile and tSapEgressFCDot1PInProfile objects are set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCOuterDot1PExcdProf specifies 802.1p value to set in the outer VLAN tag of the packet for exceed-profile frames in this forwarding class. An 'inconsistentValue' error is returned if this object is set to any value other than '-1', when tSapEgressFCOuterTagDot1POutProf and tSapEgressFCOuterTagDot1PInProf objects are set to '-1'.

OBJECT-TYPE

The value of tSapEgressFCExceedProfDscp specifies the DSCP name to set for exceed-profile frames in this forwarding class.

OBJECT-TYPE

The value of tSapEgressFCExceedProfPrec specifies the precedence value to set for exceed-profile frames in this forwarding class.

OBJECT-TYPE

Information about all sap-egress policies' HSMDA queues.

OBJECT-TYPE

Information about a particular HSMDA queue for a sap-egress policy. Entries are created by user.

OBJECT-TYPE

The HSMDA queue ID is used as the secondary index to the table entry.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapEgressHsmdaQueueTable.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of tSapEgressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapEgressHsmdaQueueTable.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueMBS specifies the maximum amount of buffer space (in bytes) allowed for this HSMDA queue.

OBJECT-TYPE

The value of tSapEgressHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.

OBJECT-TYPE

a list of all DSCP entries for all sap-egress policies.

OBJECT-TYPE

Information about a particular DSCP entry for a sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapEgressDSCP).

OBJECT-TYPE

OBJECT-TYPE

The value of tSapEgressDSCPRowStatus controls the creation/deletion of rows in this table.

OBJECT-TYPE

The value of tSapEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of the object tSapEgressDSCPHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapEgressDSCP. A value of zero implies that the default counters should be used.

OBJECT-TYPE

The value of tSapEgressDSCPfc, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.

OBJECT-TYPE

The value of tSapEgressDSCPprofile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior. This object does not support the value 'de'.

OBJECT-TYPE

This table maintains the mapping of a particular precedence value into a forwarding class

OBJECT-TYPE

Information about a particular sap-egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tSapEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tSapEgressPrecTable.

OBJECT-TYPE

The value of tSapEgressPrecRowStatus controls the creation/deletion of rows in this table.

OBJECT-TYPE

The value of tSapEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tSapEgressPrecHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapEgressPrecValue. A value of zero implies that the default counters should be used.

OBJECT-TYPE

The value of tSapEgressPrecFC, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.

OBJECT-TYPE

The value of tSapEgressPrecProfile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior. This object does not support the value 'de'.

OBJECT-TYPE

This table maintains the entries for matching criteria for IP packets on egress. In release 10.0 and higher, this table can also contain IPv6 criteria.

OBJECT-TYPE

Information about a particular egress IP or IPv6 matching criteria entry. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tSapEgrIPCritAddrType specifies the index address type this entry should match against.

OBJECT-TYPE

The value of tSapEgrIPCritIndex specifies the index for a sap-egress IP or IPv6 criteria entry.

OBJECT-TYPE

The value of tSapEgrIPCritRowStatus is used for the creation and deletion of sap-egress IP or IPv6 criteria entries.

OBJECT-TYPE

The value of tSapEgrIPCritLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of tSapEgrIPCritDescription specifies a description of the sap-egress IP or IPv6 criteria entry.

OBJECT-TYPE

The value of the object tSapEgrIPCritActionHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-egress policy specified by tSapEgressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used.

OBJECT-TYPE

The value of tSapEgrIPCritSourceIpAddrType specifies the address type of tSapEgrIPCritSourceIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.

OBJECT-TYPE

The value of tSapEgrIPCritSourceIpAddr specifies the IP or IPv6 address to match with source IP of the packet.

OBJECT-TYPE

If different from 0, the object tSapEgrIPCritSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received source IP address to match the tSapEgrIPCritSourceIpAddr. If the value of tSapEgrIPCritSourceIpMask is 0, and the value of tSapEgrIPCritSrcIpFullMask is non zero then the value of tSapEgrIPCritSrcIpFullMask is used as mask. If the value of tSapEgrIPCritSourceIpMask is non zero, it will be equal to the mask expressed the object tSapEgrIPCritSrcIpFullMask. If both tSapEgrIPCritSourceIpMask and tSapEgrIPCritSrcIpFullMask are set to 0, no matching is done on the source Ip address. If a value is specified for this object, then the value of the object tSapEgrIPCritSrcIpFullMask will be set to reflect this same mask.

OBJECT-TYPE

The value of tSapEgrIPCritDestIpAddrType specifies the address type of tSapEgrIPCritDestIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.

OBJECT-TYPE

The value of tSapEgrIPCritDestIpAddr specifies the IP or IPv6 address to match with destination IP of the packet.

OBJECT-TYPE

If different from 0, the object tSapEgrIPCritDestIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tSapEgrIPCritDestIpAddr. If the value of tSapEgrIPCritDestIpMask is 0, and the value of tSapEgrIPCritDstIpFullMask is non zero then the value of tSapEgrIPCritDstIpFullMask is used as mask. If the value of tSapEgrIPCritDestIpMask is non zero, it will be equal to the mask expressed the object tSapEgrIPCritDstIpFullMask. If both tSapEgrIPCritDestIpMask and tSapEgrIPCritDstIpFullMask are set to 0, no matching is done on the Destination Ip address. If a value is specified for this object, then the value of the object tSapEgrIPCritDstIpFullMask will be set to reflect this same mask.

OBJECT-TYPE

The value of tSapEgrIPCritProtocol specifies the IP protocol or IPv6 next-header to match. The value '-1' is used to disable matching by IP protocol or IPv6 next-header. When this value specifies an IPv6 next-header, since the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.

OBJECT-TYPE

The value of tSapEgrIPCritSourcePortValue1 specifies the first TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator. The value of tSapEgrIPCritSourcePortOperator and tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of tSapEgrIPCritSourcePortValue2 specifies the second TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator. The value of tSapEgrIPCritSourcePortOperator and tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned. Tha value of tSapEgrIPCritSourcePortValue2 has no effect and is set to default when the value of tSapEgrIPCritSourcePortOperator is set to lt, gt or eq.

OBJECT-TYPE

The value of tSapEgrIPCritSourcePortOperator specifies the manner in which tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 are to be used. The value of tSapEgrIPCritSourcePortOperator and tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of tSapEgrIPCritDestPortValue1 specifies the first TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator. The value of tSapEgrIPCritDestPortOperator and tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue1 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of tSapEgrIPCritDestPortValue2 specifies the second TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator. The value of tSapEgrIPCritDestPortOperator and tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue1 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of tSapEgrIPCritDestPortOperator specifies the manner in which tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue2 are to be used. The value of tSapEgrIPCritDestPortOperator and tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue1 should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned.

OBJECT-TYPE

The value of tSapEgrIPCritDSCP specifies the DSCP value to match in the packet

OBJECT-TYPE

The value of tSapEgrIPCritFragment specifies fragmented packet matching. If the value is 'true', only fragmented packets match. If the value is 'false', only non-fragmented packets match. If the value is 'off', all packets match regardless. This field is only relevant for ipv4. An inconsistentValue error is returned when the value of tSapEgrIPCritFragment is not 'off' and the value of tSapEgrIPCritAddrType is not 'ipv4'.

OBJECT-TYPE

tSapEgrIPCritActionFC specifies the forwarding class to be used to classify all the traffic that matches the specific IP or IPv6 criteria. The value ''H indicates that the FC is derived from ingress classification and profiling functions.

OBJECT-TYPE

tSapEgrIPCritActionProfile specifies the profile of the traffic that matches the specific IP or IPv6 criteria. The value none indicates that the profile is derived from ingress classification and profiling functions. This object does not support the value 'de'.

OBJECT-TYPE

If different from 0, the object tSapEgrIPCritSrcIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tSapEgrIPCritSourceIpAddr. If the value of tSapEgrIPCritSourceIpMask is non zero, it will be equal to the mask expressed in the object tSapEgrIPCritSrcIpFullMask. If both tSapEgrIPCritSourceIpMask and tSapEgrIPCritSrcIpFullMask are set to 0, no matching is done on the Source IP address. If a regular mask is specified for tSapEgrIPCritSrcIpFullMask then the value of tSapEgrIPCritSourceIpMask will be changed to reflect this value.

OBJECT-TYPE

If different from 0, the object tSapEgrIPCritDstIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Dest IP address to match the tSapEgrIPCritDestIpAddr. If the value of tSapEgrIPCritDestIpMask is non zero, it will be equal to the mask expressed in the object tSapEgrIPCritDstIpFullMask. If both tSapEgrIPCritDestIpMask and tSapEgrIPCritDstIpFullMask are set to 0, no matching is done on the Dest IP address. If a regular mask is specified for tSapEgrIPCritDstIpFullMask then the value of tSapEgrIPCritDestIpMask will be changed to reflect this value.

OBJECT-TYPE

The value of tSapEgrIPCritSrcIpPrefixList specifies the IP prefix list used as match criterion for the source ip address. The value specified for this object must correspond to a prefix list defined in tQosPrefixListTable. If the value of this object is empty then the values of the objects tSapEgrIPCritSourceIpAddr and tSapEgrIPCritSourceIpMask or tSapEgrIPCritSrcIpFullMask are used as source ip address match criterion. When this object is set to a non-empty value then the objects tSapEgrIPCritSourceIpAddr, tSapEgrIPCritSourceIpMask and tSapEgrIPCritSrcIpFullMask are reset to their default values by the system. Vice versa, when a new (non-default) value is provided for the objects tSapEgrIPCritSourceIpAddr and tSapEgrIPCritSourceIpMask or tSapEgrIPCritSrcIpFullMask then this object is reset to its default (empty) value by the system. An attempt to set tSapEgrIPCritSrcIpPrefixList to a non-default value in combination with setting any of tSapEgrIPCritSourceIpAddr and tSapEgrIPCritSourceIpMask or tSapEgrIPCritSrcIpFullMask to (a) non-default value(s) is rejected by the system. This object is only supported when the value of tSapEgrIPCritAddrType is 'ipv4 (1)'. An inconsistentValue error is returned when the value of tSapEgrIPCritSrcIpPrefixList is set to non-default value and the value of tSapEgrIPCritAddrType is not 'ipv4 (1)'.

OBJECT-TYPE

The value of tSapEgrIPCritDstIpPrefixList specifies the IP prefix list used as match criterion for the destination ip address. The value specified for this object must correspond to a prefix list defined in tQosPrefixListTable. If the value of this object is empty then the values of the objects tSapEgrIPCritDestIpAddr and tSapEgrIPCritDestIpMask or tSapEgrIPCritDstIpFullMask are used as destination ip address match criterion. When this object is set to a non-empty value then the objects tSapEgrIPCritDestIpAddr, tSapEgrIPCritDestIpMask and tSapEgrIPCritDstIpFullMask are reset to their default values by the system. Vice versa, when a new (non-default) value is provided for the objects tSapEgrIPCritDestIpAddr and tSapEgrIPCritDestIpMask or tSapEgrIPCritDstIpFullMask then this object is reset to its default (empty) value by the system. An attempt to set tSapEgrIPCritDstIpPrefixList to a non-default value in combination with setting any of tSapEgrIPCritDestIpAddr and tSapEgrIPCritDestIpMask or tSapEgrIPCritDstIpFullMask to (a) non-default value(s) is rejected by the system This object is only supported when the value of tSapEgrIPCritAddrType is 'ipv4 (1)'. An inconsistentValue error is returned when the value of tSapEgrIPCritDstIpPrefixList is set to non-default value and the value of tSapEgrIPCritAddrType is not 'ipv4 (1)'.

OBJECT-TYPE

The value of tSapEgrIPCritActionPolicer specifies the policer identifier to be used for the traffic matching this IP Criteria entry. It provides the ability to direct specific traffic to a different SAP egress local policer (tSapEgrIPCritActionPolicer) independently from that configured for the traffic's FC in tSapEgressFCPolicer. This action policer will be referred to as a bypass-policer. If a corresponding sap-egress policer identifier does not exist in tSapEgrPolicerTable, an 'inconsistentValue' error is returned. When the value of tSapEgrIPCritActionPolicer is set to its default value, then the traffic for this forwarding class will not use a bypass-policer. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue is set to default value and the value of tSapEgrIPCritActionQueue set to default value, then the traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer and then feed into a system determined egress access port queue-group queue. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue is set to non-default value and the value of tSapEgrIPCritActionQueue is set to non-default value, then the traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer and then feed into a queue within the egress access port queue-group instance (TIMETRA-SAP-MIB::sapEgressPortQGrp, TIMETRA-SAP-MIB::sapEgressPortQGrpInstanceId) attached to the SAP. The queue used will be specified by tSapEgrIPCritActionQueue. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue set to default value and the value of tSapEgrIPCritActionQueue is set to non-default value, then traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer, and then feed into the local queue specified by tSapEgrIPCritActionQueue. An 'inconsistentValue' error is returned if tSapEgrIPCritActionPolicer is set to a default value and either tSapEgrIPCritActionPortQGrpQueue or tSapEgrIPCritActionQueue are set to non-default value(s). An 'inconsistentValue' error is returned if the value of tSapEgrIPCritActionPolicer is set to a non-default value when the value of tSapEgrIPCritRowStatus is set to 'notInService.

OBJECT-TYPE

The value of tSapEgrIPCritActionPortQGrpQueue specifies whether to use the queue specified in egress access port queue-group instance (TIMETRA-SAP-MIB::sapEgressPortQGrp, TIMETRA-SAP-MIB::sapEgressPortQGrpInstanceId) for this IP Criteria entry. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue is set to default value and the value of tSapEgrIPCritActionQueue set to default value, then the traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer and then feed into a system determined egress access port queue-group queue. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue is set to non-default value and the value of tSapEgrIPCritActionQueue is set to non-default value, then the traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer and then feed into a queue within the egress access port queue-group instance (TIMETRA-SAP-MIB::sapEgressPortQGrp, TIMETRA-SAP-MIB::sapEgressPortQGrpInstanceId) attached to the SAP. The queue used will be specified by tSapEgrIPCritActionQueue. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue set to default value and the value of tSapEgrIPCritActionQueue is set to non-default value, then traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer, and then feed into the local queue specified by tSapEgrIPCritActionQueue. An 'inconsistentValue' error is returned if tSapEgrIPCritActionPolicer is set to a default value and either tSapEgrIPCritActionPortQGrpQueue or tSapEgrIPCritActionQueue are set to non-default value(s). An 'inconsistentValue' error is returned if the value of tSapEgrIPCritActionPortQGrpQueue is set to a non-default value when the value of tSapEgrIPCritRowStatus is set to 'notInService.

OBJECT-TYPE

The value of tSapEgrIPCritActionQueue specifies queue to use once traffic matching this IP Criteria entry has been policed by the local policer tSapEgrIPCritActionPolicer. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue is set to default value and the value of tSapEgrIPCritActionQueue set to default value, then the traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer and then feed into a system determined egress access port queue-group queue. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue is set to non-default value and the value of tSapEgrIPCritActionQueue is set to non-default value, then the traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer and then feed into a queue within the egress access port queue-group instance (TIMETRA-SAP-MIB::sapEgressPortQGrp, TIMETRA-SAP-MIB::sapEgressPortQGrpInstanceId) attached to the SAP. The queue used will be specified by tSapEgrIPCritActionQueue. When the value of tSapEgrIPCritActionPolicer is set to non-default value, the value of tSapEgrIPCritActionPortQGrpQueue set to default value and the value of tSapEgrIPCritActionQueue is set to non-default value, then traffic matching this IP Criteria entry will use the local policer specified by tSapEgrIPCritActionPolicer, and then feed into the local queue specified by tSapEgrIPCritActionQueue. An 'inconsistentValue' error is returned if tSapEgrIPCritActionPolicer is set to a default value and any of tSapEgrIPCritActionPortQGrpQueue, tSapEgrIPCritActionQueue, tSapEgrIPCritActionPolicerUseFCQ are set to non-default value(s). An 'inconsistentValue' error is returned if the value of tSapEgrIPCritActionQueue is set to a non-default value when the value of tSapEgrIPCritRowStatus is set to 'notInService.

OBJECT-TYPE

tSapEgrIPCritActionPolicerUseFCQ specifies whether to direct the output of the policer to the configured (fc-mapped) queues instead of the default behavior. An 'inconsistentValue' error is returned if tSapEgrIPCritActionPolicerUseFCQ is set to a non-default value and any of tSapEgrIPCritActionPortQGrpQueue, tSapEgrIPCritActionQueue are set to non-default value. An 'inconsistentValue' error is returned if tSapEgrIPCritActionPolicerUseFCQ is set to a non-default value and tSapEgrIPCritActionPolicer is set to default value.

OBJECT-TYPE

tSapEgrPolicerTable defines SAP Egress Policer Table for providing, via SNMP, the capability of defining the policers. tSapEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapEgressFCTable.

OBJECT-TYPE

tSapEgrPolicerEntry defines an entry in the tSapEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapEgrPolicerRowStatus.

OBJECT-TYPE

tSapEgrPolicerId defines the SAP Egress Policer identifier. It identifies an sap-egress policer in the managed system.

OBJECT-TYPE

tSapEgrPolicerRowStatus allows entries to be created and deleted in the tSapEgrPolicerTable.

OBJECT-TYPE

tSapEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.

OBJECT-TYPE

tSapEgrPolicerDescr specifies the description of the policer.

OBJECT-TYPE

The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

tSapEgrPolicerParent specifies the arbiter to which this queue would be feeding.

OBJECT-TYPE

tSapEgrPolicerLevel specifies the level of priority while feeding the parent.

OBJECT-TYPE

tSapEgrPolicerWeight specifies the weight that needs to be used by the arbiter to which this queue would be feeding.

OBJECT-TYPE

tSapEgrPolicerAdminPIR specifies the administrative PIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapEgrPolicerAdminPIRHi and tSapEgrPolicerAdminPIRLo objects.

OBJECT-TYPE

tSapEgrPolicerAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 15.0 release and has been replaced with tSapEgrPolicerAdminCIRHi and tSapEgrPolicerAdminCIRLo objects.

OBJECT-TYPE

tSapEgrPolicerStatMode specifies the mode of statistics collected by this policer.

OBJECT-TYPE

The tSapEgrPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.

OBJECT-TYPE

The tSapEgrPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.

OBJECT-TYPE

The tSapEgrPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.

OBJECT-TYPE

tSapEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.

OBJECT-TYPE

The administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminPIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.

OBJECT-TYPE

The administrative CIR percentage, in centipercent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminCIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.

OBJECT-TYPE

The value of tSapEgrPolicerRateType specifies the type of egress policer rate. When the value of the object is set to 'kbps', the egresss policer rates are specified in kbps. The objects tSapEgrPolicerAdminPIRPercent and tSapEgrPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit' or 'percentReferPortLimit', the egress policer rates are specified in percentage. The objects tSapEgrPolicerAdminPIR and tSapEgrPolicerAdminCIR will be set to their default values.

OBJECT-TYPE

The value of tSapEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The value of tSapEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The value of tSapEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapEgrPolicerSlopeStartDepth up to the tSapEgrPolicerSlopeMaxProb at the tSapEgrPolicerSlopeMaxDepth. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The value of tSapEgrPolicerSlopeMap specifies the slope map to be used with this policer. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The value of tSapEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.

OBJECT-TYPE

The value of tSapEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tSapEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.

OBJECT-TYPE

The value of tSapEgrPolicerProfileOutPreserve specifies whether to preserve the color of offered out-of-profile traffic at sap-egress policer (profile of the packet can change based on egress CIR state). If the value of tSapEgrPolicerProfileOutPreserve is set to 'true', traffic determined as out-of-profile at ingress policer will be treated as out-of-profile at sap-egress policer.

OBJECT-TYPE

The value of tSapEgrPolicerEnableExceedPir specifies whether to enable exceeding of PIR for sap-egress policer, i.e., whether the traffic should be forwarded as exceed-profile instead of being dropped.

OBJECT-TYPE

The value of tSapEgrPolicerEnblDscpPrecRemark specifies whether to enable remarking for DSCP and Precedence based on the profile state of a packet being forwarded by sap-egress policer.

OBJECT-TYPE

The value of tSapEgrPolicerSchedParent specifies the scheduler to which this policer would be feeding to. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght.

OBJECT-TYPE

The value of tSapEgrPolicerSchedLevel specifies the level of priority while feeding to the parent. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght.

OBJECT-TYPE

The value of tSapEgrPolicerSchedWeight specifies the weight that needs to be used by the scheduler to which this policer would be feeding to. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght.

OBJECT-TYPE

The value of tSapEgrPolicerSchedCIRLevel specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this policer as for the above CIR traffic. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght.

OBJECT-TYPE

The value of tSapEgrPolicerSchedCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this policer would be feeding to. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght.

OBJECT-TYPE

The value of tSapEgrPolicerSchedUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this sap-egress policer is parented by a port-level scheduler. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght.

OBJECT-TYPE

The value of the tSapEgrPolicerSchedPortLvl specifies the port priority this policer will use to receive bandwidth from the port-level scheduler for its above-cir offered load. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght. An 'inconsistentValue' error is returned if the value of tSapEgrPolicerSchedPortLvl is set to non-default value when the value of object tSapEgrPolicerSchedUsePortParent is 'false'.

OBJECT-TYPE

The value of the tSapEgrPolicerSchedPortWght specifies the weight this policer will use to receive bandwidth from the port-level scheduler for its above-cir offered load. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght. An 'inconsistentValue' error is returned if the value of tSapEgrPolicerSchedPortWght is set to non-default value when the value of object tSapEgrPolicerSchedUsePortParent is 'false'.

OBJECT-TYPE

The value of the tSapEgrPolicerSchedPortCIRLvl specifies the port priority this policer will use to receive bandwidth from the port-level scheduler for its within-cir offered load. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght. An 'inconsistentValue' error is returned if the value of tSapEgrPolicerSchedPortCIRLvl is set to non-default value when the value of object tSapEgrPolicerSchedUsePortParent is 'false'.

OBJECT-TYPE

The value of the tSapEgrPolicerSchedPortCIRWght specifies the weight this policer will use to receive bandwidth from the port-level scheduler for its within-cir offered load. The objects tSapEgrPolicerSchedParent, tSapEgrPolicerSchedLevel, tSapEgrPolicerSchedWeight, tSapEgrPolicerSchedCIRLevel and tSapEgrPolicerSchedCIRWeight are mutually exclusive to tSapEgrPolicerSchedUsePortParent, tSapEgrPolicerSchedPortLvl, tSapEgrPolicerSchedPortWght, tSapEgrPolicerSchedPortCIRLvl and tSapEgrPolicerSchedPortCIRWght. An 'inconsistentValue' error is returned if the value of tSapEgrPolicerSchedPortCIRWght is set to non-default value when the value of object tSapEgrPolicerSchedUsePortParent is 'false'.

OBJECT-TYPE

The value of tSapEgrPolicerAdminPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapEgrPolicerAdminPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapEgrPolicerAdminPIRHi along with the value of tSapEgrPolicerAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapEgrPolicerAdminPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with tSapEgrPolicerAdminPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapEgrPolicerAdminPIRHi along with the value of tSapEgrPolicerAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapEgrPolicerAdminCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapEgrPolicerAdminCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tSapEgrPolicerAdminCIRHi along with the value of tSapEgrPolicerAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tSapEgrPolicerAdminCIRLo specifies the lower 32 bits of the administrative CIR specified by the user. This value should always be set along with tSapEgrPolicerAdminCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tSapEgrPolicerAdminCIRHi along with the value of tSapEgrPolicerAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

A table that contains SAP egress policy name information. Entries are created automatically by the system when tSapEgressPolicyName object is set for the SAP egress policy.

OBJECT-TYPE

Basic information about a specific SAP egress policy name.

OBJECT-TYPE

The value of the object tSapEgrPolicyNameId indicates the policy name associated with this SAP egress policy.

OBJECT-TYPE

This value of the object tSapEgrPolicyNameRowStatus indicates the status of this row.

OBJECT-TYPE

The value of tSapEgrPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains the list of all dot1p entries for all sap-egress policies.

OBJECT-TYPE

Information about a particular dot1p match for a sap-egress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tSapEgressDot1pValue specifies the dotp value to match in the packet. This value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.

OBJECT-TYPE

tSapEgressDot1pRowStatus allows entries to be created and deleted in the tSapEgressDot1pTable.

OBJECT-TYPE

The value of tSapEgressDot1pLastChanged indicates the sysUpTime at the time of the last modification of this entry.

OBJECT-TYPE

The value of tSapEgressDot1pFC specifies the forwarding class to be used to classify all the traffic that matches the Dot1p value specified by tSapEgressDot1pValue. Unless tSapEgressDot1pFC is specified explicitly, this match will be ignored for classification purposes.

OBJECT-TYPE

The value of tSapEgressDot1pProfile specifies the profile to use for packets that match the dot1p value specified by tSapEgressDot1pValue.

OBJECT-TYPE

The tSapEgrDynamicCfgTable has an entry for each Sap Egress QoS Policy.

OBJECT-TYPE

The value of tSapEgrDynamicCfgEntry represents information about a particular Sap Egress QoS Policy. Sap Egress policy (1) is the default entry and created by the agent, while all other entries are created by user. Default Entry cannot be modified/deleted. The other entries can be modified/deleted are deleted by user.

OBJECT-TYPE

The value of tSapEgrDynamicCfgLastChanged indicates the sysUpTime at the time of the last modification of this row.

OBJECT-TYPE

The value of tSapEgrSharedPccRuleInsertPoint specifies the place at which the pcc-rule IP criteria entries that are received from Diameter and that are shared across several hosts will be inserted in the policy. The range defined here will be reserved for those entries; no other entries will be allowed in this range. The value of zero means that no pcc-rule IP criteria entries can be inserted in the policy by Diameter. If tSapEgrSharedPccRuleInsertSize is set to zero, then tSapEgrSharedPccRuleInsertPoint is also set to zero by the system. Note that the range reserved for pcc-rule entries is the same for IPv4 criteria and IPv6 criteria.

OBJECT-TYPE

The value of tSapEgrSharedPccRuleInsertSize specifies how many pcc-rule IP criteria entries that are received from Diameter and that are shared across several hosts can be inserted in the policy. The range defined here will be reserved for those entries; no other entries will be allowed in this range. The value of zero means that no pcc-rule IP criteria entries can be inserted in the policy by Diameter. If tSapEgrSharedPccRuleInsertPoint is set to zero, then tSapEgrSharedPccRuleInsertSize is also set zero by the system. Note that the range reserved for pcc-rule entries is the same for IPv4 criteria and IPv6 criteria.

OBJECT-TYPE

The value of the object tSapEgrSharedPccRuleNbrInsert indicates how many pcc-rule IP criteria entries received from Diameter have been inserted in this policy.

OBJECT-TYPE

The value of the object tSapEgrSharedPccRuleNbrPolicy indicates how many pcc-rule shared policies are currently created based on this policy.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerInsertPoint specifies the place at which the dynamic policers required for pcc-rule IP criteria entries that are received from Diameter and that are shared across several hosts will be inserted in the policy. The range defined here will be reserved for those dynamic policers; no other policers will be allowed in this range. The value of zero means that no dynamic policers can be inserted in the policy by Diameter. If tSapEgrDynamicPolicerInsertSize is set to zero, then tSapEgrDynamicPolicerInsertPoint is also set zero by the system. Note that the range reserved for pcc-rule dynamic policers is the same for IPv4 criteria and IPv6 criteria.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerInsertSize specifies how many dynamic policers required for pcc-rule IP criteria entries that are received from Diameter and that are shared across several hosts can be inserted in the policy. The range defined here will be reserved for those dynamic policers; no other policers will be allowed in this range. The value of zero means that no dynamic policers can be inserted in the policy by Diameter. If tSapEgrDynamicPolicerInsertSize is set to zero, then tSapEgrDynamicPolicerInsertPoint is also set zero by the system. Note that the range reserved for pcc-rule dynamic policers is the same for IPv4 criteria and IPv6 criteria.

OBJECT-TYPE

The value of the object tSapEgrDynamicPolicerNbrInsert indicates how many dynamic policers required for pcc-rule IP criteria entries received from Diameter have been inserted in this policy.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerParent specifies the arbiter to which this policer would be feeding.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerLevel specifies the level of priority while feeding the parent.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerWeight specifies the weight that needs to be used by the arbiter to which this policer would be feeding.

OBJECT-TYPE

The value of tSapEgrDynamicPolicerStatMode specifies the mode of statistics collected by this policer.

OBJECT-TYPE

The tSapEgressHsWrrGrpTable contains HS WRR (Weighted Round Robin) group information on sap-egress policies. Entries in this table are created whenever a sap-egress policy is created in tSapEgressEntry.

OBJECT-TYPE

Each entry in tSapEgressHsWrrGrpEntry represents the information about a particular HS WRR Group specified by tSapEgressHsWrrGrpId.

OBJECT-TYPE

The value of tSapEgressHsWrrGrpId indicates the HS WRR group identifier.

OBJECT-TYPE

The value of tSapEgressHsWrrGrpLastChanged indicates the sysUpTime for the last change to this row.

OBJECT-TYPE

The value of tSapEgressHsWrrGrpRateType specifies the rate type for this group. When the value of tSapEgressHsWrrGrpRateType is set to 'kbps', the group rates are specified in kbps. The object tSapEgressHsWrrGrpRatePercent will be set to its default values. When the value of tSapEgressHsWrrGrpRateType is set to 'percent', the group rates are specified in percentage. The object tSapEgressHsWrrGrpRate will be set to its default value.

OBJECT-TYPE

The value of tSapEgressHsWrrGrpRate specifies the queue's PIR rate.

OBJECT-TYPE

The value of tSapEgressHsWrrGrpRatePercent specifies the group rate percent, in centipercent. An 'inconsistentValue' error is returned if tSapEgressHsWrrGrpRatePercent is set to non-default value when the object tSapEgressHsWrrGrpRateType is set to 'kbps'.

OBJECT-TYPE

The value of tSapEgressHsWrrGrpPIRAdaption specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tSapEgressHsWrrGrpClassWeight specifies the weight of scheduling class.

OBJECT-IDENTITY

OBJECT-TYPE

OBJECT-TYPE

Information about a particular Network Policy. network policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus.

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

tNetworkPolicyDescription holds the description for this policy.

OBJECT-TYPE

tNetworkPolicyIngressDefaultActionFC specifies the default forwarding class to be used while classifying the ingress traffic.

OBJECT-TYPE

tNetworkPolicyIngressDefaultActionProfile specifies the default profile to be used for the ingressing traffic.

OBJECT-TYPE

The object tNetworkPolicyEgressRemark specifies if the system will remark the egress packets or not.

OBJECT-TYPE

Timestamp of last change to this row in tNetworkPolicyTable.

OBJECT-TYPE

The object has significance only for the label edge routers which should honor the DSCP markings instead of the LSPEXP bits.

OBJECT-TYPE

The value of tNetworkPolicyEgressRemarkDscp object specifies whether DSCP bits in the internal IP header should be remarked. This object is valid only when tNetworkPolicyEgressRemark is set to 'true'.

OBJECT-TYPE

The value of tNetworkPolicyIngMatchCriteria indicates which type of match criteria the policy should use. When set to 'ip (1)', the policy looks for match entries in tNetworkIngIPCritTable. The value of tNetworkPolicyIngMatchCriteria is set to 'ip (1)' when the first match criteria table entry is created. The value is set to 'none (3)' when the last match criteria table entry is removed.

OBJECT-TYPE

The value of tNetworkPolicyName specifies the name to associate with this policy.

OBJECT-TYPE

The value of tNetworkPolicyEgrMatchCriteria indicates which type of match criteria the policy should use. When set to 'ip (1)', the policy looks for match entries in tNetworkEgrIPCritTable. The value of tNetworkPolicyEgrMatchCriteria is set to 'ip (1)' when the first match criteria table entry is created. The value is set to 'none (3)' when the last match criteria table entry is removed.

OBJECT-TYPE

The value of tNetworkIngressDSCPTable contains information about DSCP mapping for network policy.

OBJECT-TYPE

Information about a dscp map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tNetworkIngressDSCP specifies Differentiated Services Code Point (DSCP) value name.

OBJECT-TYPE

The value of tNetworkIngressDSCPRowStatus is used for the creation and deletion of DSCP entries for network ingress Qos policy.

OBJECT-TYPE

The value of tNetworkIngressDSCPFC specifies the forwarding class (FC) associated with this DSCP value. There is no default value for this object. It must be set at the time of row creation.

OBJECT-TYPE

The value of tNetworkIngressDSCPProfile specifies the profile of the packet associated with this DSCP value. There is no default value for this object. It must be set at the time of row creation.

OBJECT-TYPE

timestamp of last change to this row in tNetworkIngressDSCPTable.

OBJECT-TYPE

The value of tNetworkIngressDot1pTable contains information about a dot1p priority mapping for a network policy.

OBJECT-TYPE

Information about a dot1p map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tNetworkIngressDot1pValue specifies IEEE 802.1p priority value.

OBJECT-TYPE

The value of tNetworkIngressDot1pRowStatus is used for the creation and deletion of dot1p entries for network ingress Qos policy.

OBJECT-TYPE

The value of tNetworkIngressDot1pFC specifies the forwarding class (FC) associated with this dot1p value. There is no default value for this object. It must be set at the time of row creation.

OBJECT-TYPE

The value of tNetworkIngressDot1pProfile specifies the profile of the packet associated with this dot1p value. There is no default value for this object. It must be set at the time of row creation.

OBJECT-TYPE

timestamp of last change to this row in tNetworkIngressDot1pTable.

OBJECT-TYPE

The value of tNetworkIngressLSPEXPTable contains information about LSP EXP mapping for a network policy.

OBJECT-TYPE

Information about LSP EXP mapping for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tNetworkIngressLSPEXP specifies LSP EXP experimental bit values.

OBJECT-TYPE

The value of tNetworkIngressLSPEXPRowStatus is used for the creation and deletion of LSP EXP entries for network ingress Qos policy.

OBJECT-TYPE

The value of tNetworkIngressLSPEXPFC specifies the forwarding class (FC) associated with this LSP EXP value. There is no default value for this object. It must be set at the time of row creation.

OBJECT-TYPE

The value of tNetworkIngressLSPEXPProfile specifies the profile of the packet associated with this LSP EXP value. There is no default value for this object. It must be set at the time of row creation.

OBJECT-TYPE

timestamp of last change to this row in tNetworkIngressLSPEXPTable.

OBJECT-TYPE

Information about all network policies' egress FC traffic disposition.

OBJECT-TYPE

Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

the name of the forwarding class (FC).

OBJECT-TYPE

the DSCP to use for in-profile traffic.

OBJECT-TYPE

the DSCP to use for out-of-profile traffic.

OBJECT-TYPE

the lsp-exp value to use for in-profile traffic.

OBJECT-TYPE

the lsp-exp value to use for out-of-profile traffic.

OBJECT-TYPE

the Dot1p to use for in-profile traffic.

OBJECT-TYPE

the Dot1p to use for out-of-profile traffic.

OBJECT-TYPE

timestamp of last change to this row in tNetworkEgressFCTable.

OBJECT-TYPE

The value of tNetworkEgressFCForceDEValue specifies the DE value to set for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tNetworkEgressFCDEMark object is set to 'false'.

OBJECT-TYPE

The value of tNetworkEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCForceDEValue object is not set to '-1'.

OBJECT-TYPE

tNetworkEgressFCQGrpQueue specifies the specific queue from queue-group TIMETRA-VRTR-MIB::vRtrIfQosQGrp to be used for packets in this forwarding class.

OBJECT-TYPE

The value of tNetworkEgressFCQGrpPolicer specifies the policer from queue-group to be used for packets in this forwarding class.

OBJECT-TYPE

Information about all network policies' ingress FC traffic disposition.

OBJECT-TYPE

Information about a particular network policy's ingress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tNetworkIngressFCName specifies the name of the forwarding class (FC).

OBJECT-TYPE

The value of tNetworkIngressFCLastChanged indicates the sysUpTime for the last change to this entry.

OBJECT-TYPE

The value of tNetworkIngressFCMultiCastPlcr specifies the policer to be used for multicast traffic for this forwarding class.

OBJECT-TYPE

The value of tNetworkIngressFCUniCastPlcr specifies the policer to be used for unicast traffic for this forwarding class.

OBJECT-TYPE

The value of tNetworkIngressFCBroadCastPlcr specifies the policer to be used for broadcast traffic for this forwarding class.

OBJECT-TYPE

The value of tNetworkIngressFCUnknownPlcr specifies the policer to be used for unknown traffic for this forwarding class.

OBJECT-TYPE

tNetworkEgressDSCPTable lists all DSCP entries for all network egress policies.

OBJECT-TYPE

The tNetworkEgressDSCPEntry defines a particular DSCP entry for a network egress policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. In the event that one policy has multiple entries, and the tNetworkEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tNetworkEgressDSCP).

OBJECT-TYPE

The value of tNetworkEgressDSCP indicates the DSCP value for which the mapping is done. It is used as a secondary index for tNetworkEgressDSCPTable.

OBJECT-TYPE

The value of tNetworkEgressDSCPRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressDSCPProfile must be specified when row is created.

OBJECT-TYPE

The value of tNetworkEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tNetworkEgressDSCPFC will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions. There is no DEFVAL for tNetworkEgressDSCPFC. It must be set at the time of row creation.

OBJECT-TYPE

The value of tNetworkEgressDSCPProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressDSCPProfile. It must be set at the time of row creation.

OBJECT-TYPE

The tNetworkEgressPrecTable table maintains the mapping of a particular precedence value into a forwarding class

OBJECT-TYPE

The tNetworkEgressPrecEntry defines a particular network egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user.

OBJECT-TYPE

The value of tNetworkEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tNetworkEgressPrecTable.

OBJECT-TYPE

The value of tNetworkEgressPrecRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressPrecProfile must be specified when row is created.

OBJECT-TYPE

The value of tNetworkEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of tNetworkEgressPrecFC will overwrite the forwarding class derived from egress. The new forwarding class is used for egress remarking and queue mapping decisions. There is no DEFVAL for tNetworkEgressPrecFC. It must be set at the time of row creation.

OBJECT-TYPE

The value of tNetworkEgressPrecProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the egress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressPrecProfile. It must be set at the time of row creation.

OBJECT-TYPE

The value of tNetworkIngIPCritTable maintains the entries for matching of IP/IPv6 packets on ingress network Qos policy.

OBJECT-TYPE

Information about a particular ingress IP/IPv6 matching criteria entry. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tNetworkIngIPCritType specifies the address type this entry should match against.

OBJECT-TYPE

The value of tNetworkIngIPCritIndex specifies the IP criteria entry index for network ingress Qos policy.

OBJECT-TYPE

The value of tNetworkIngIPCritRowStatus is used for the creation and deletion of IP criteria entries for network ingress Qos policy.

OBJECT-TYPE

The value of tNetworkIngIPCritLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of tNetworkIngIPCritDescription specifies a description of IP criteria entry for network ingress Qos policy.

OBJECT-TYPE

The value of tNetworkIngIPCritActionFC specifies the forwarding class to be used to classify all the traffic that matches the specific IP criteria. The value ''H indicates that the FC is derived from ingress classification and profiling functions.

OBJECT-TYPE

The value of tNetworkIngIPCritActionProfile specifies the profile of the packets associated with the forwarding class specified by tNetworkIngIPCritActionFC.

OBJECT-TYPE

The value of tNetworkIngIPCritSrcIpAddrType specifies the address type of tNetworkIngIPCritSrcIpAddr. If the value of this object is not 'unknown (0)', it must have the same value as tNetworkIngIPCritType.

OBJECT-TYPE

The value of tNetworkIngIPCritSrcIpAddr specifies the IP address to match with source IP of the packet.

OBJECT-TYPE

The value of tNetworkIngIPCritSrcIpMask specifies the mask value for this policy IP criteria entry. The mask is ANDed with the received source IP address to match the tNetworkIngIPCritSrcIpAddr. If the value of tNetworkIngIPCritSrcIpMask is zero and the value of tNetworkIngIPCritSrcIpFullMask is non-zero, then the value of tNetworkIngIPCritSrcIpFullMask is used as mask. If both tNetworkIngIPCritSrcIpMask and tNetworkIngIPCritSrcIpFullMask are set to 0, no matching is done on the source IP address. If a value is specified for this object, then the value of the tNetworkIngIPCritSrcIpFullMask will be set to reflect this same mask.

OBJECT-TYPE

The value of tNetworkIngIPCritSrcIpFullMask specifies the mask value for this policy IP criteria entry. The mask is ANDed with the received source IP address to match the tNetworkIngIPCritSrcIpAddr. If the value of tNetworkIngIPCritSrcIpMask is zero and the value of tNetworkIngIPCritSrcIpFullMask is non-zero, then the value of tNetworkIngIPCritSrcIpFullMask is used as mask. If both tNetworkIngIPCritSrcIpMask and tNetworkIngIPCritSrcIpFullMask are set to 0, no matching is done on the Source IP address. If a regular mask is specified for tNetworkIngIPCritSrcIpFullMask, then the value of tNetworkIngIPCritSrcIpMask will be changed to reflect this value.

OBJECT-TYPE

The value of tNetworkIngIPCritDstIpAddrType specifies the address type of tNetworkIngIPCritDstIpAddr. If the value of this object is not 'unknown (0)', it must have the same value as tNetworkIngIPCritType.

OBJECT-TYPE

The value of tNetworkIngIPCritDstIpAddr specifies the IP address to match with destination IP of the packet.

OBJECT-TYPE

The value of tNetworkIngIPCritDstIpMask specifies the mask value for this policy IP criteria entry. The mask is ANDed with the received destination IP address to match the tNetworkIngIPCritDstIpAddr. If the value of tNetworkIngIPCritDstIpMask is zero and the value of tNetworkIngIPCritDstIpFullMask is non-zero, then the value of tNetworkIngIPCritDstIpFullMask is used as mask. If both tNetworkIngIPCritDstIpMask and tNetworkIngIPCritDstIpFullMask are set to 0, no matching is done on the source IP address. If a value is specified for this object, then the value of the tNetworkIngIPCritDstIpFullMask will be set to reflect this same mask.

OBJECT-TYPE

The value of tNetworkIngIPCritDstIpFullMask specifies the mask value for this policy IP criteria entry. The mask is ANDed with the received destiantion IP address to match the tNetworkIngIPCritDstIpAddr. If the value of tNetworkIngIPCritDstIpMask is zero and the value of tNetworkIngIPCritDstIpFullMask is non-zero, then the value of tNetworkIngIPCritDstIpFullMask is used as mask. If both tNetworkIngIPCritDstIpMask and tNetworkIngIPCritDstIpFullMask are set to 0, no matching is done on the Source IP address. If a regular mask is specified for tNetworkIngIPCritDstIpFullMask, then the value of tNetworkIngIPCritDstIpMask will be changed to reflect this value.

OBJECT-TYPE

The value of tNetworkIngIPCritProtocol specifies the IP protocol to match. The value '-1' is used to disable matching by IP protocol.

OBJECT-TYPE

The value of tNetworkIngIPCritSrcPortValue1 specifies the first TCP/UDP source port value. The value of this object is used according to the value of tNetworkIngIPCritSrcPortOperator.

OBJECT-TYPE

The value of tNetworkIngIPCritSrcPortValue2 specifies the second TCP/UDP source port value. The value of this object is used according to the value of tNetworkIngIPCritSrcPortOperator.

OBJECT-TYPE

The value of tNetworkIngIPCritSrcPortOperator specifies the manner in which tNetworkIngIPCritSrcPortValue1 and tNetworkIngIPCritSrcPortValue2 are to be used.

OBJECT-TYPE

The value of tNetworkIngIPCritDstPortValue1 specifies the first TCP/UDP destination port value. The value of this object is used according to the value of tNetworkIngIPCritDstPortOperator.

OBJECT-TYPE

The value of tNetworkIngIPCritDstPortValue2 specifies the second TCP/UDP destination port value. The value of this object is used according to the value of tNetworkIngIPCritDstPortOperator.

OBJECT-TYPE

The value of tNetworkIngIPCritDstPortOperator specifies the manner in which tNetworkIngIPCritDstPortValue1 and tNetworkIngIPCritDstPortValue2 are to be used.

OBJECT-TYPE

The value of tNetworkIngIPCritDSCP specifies the DSCP value to match in the packet

OBJECT-TYPE

The value of tNetworkIngIPCritFragment specifies matching criteria to be used for fragmented or non-fragmented packets. off (1) - match all packets regardless of fragmented or not. false (2) - match all non-fragmented packets. true (3) - match all fragmented packets. firstOnly (4) - match only the initial packet fragment. nonFirstOnly (5) - match non-initial packet fragment. The values 'firstOnly (4)' and 'nonFirstOnly (5)' are supported only when the value of tNetworkIngIPCritType is set to 'ipv6 (2)'.

OBJECT-TYPE

The value of tNetworkIngIPCritSrcIpPrefixList specifies the IP prefix list used as match criterion for the source ip address. The value specified for this object must correspond to a prefix list defined in tQosPrefixListTable. If the value of this object is empty then the values of the objects tNetworkIngIPCritSrcIpAddr and tNetworkIngIPCritSrcIpMask or tNetworkIngIPCritSrcIpFullMask are used as source ip address match criterion. When this object is set to a non-empty value then the objects tNetworkIngIPCritSrcIpAddr, tNetworkIngIPCritSrcIpMask and tNetworkIngIPCritSrcIpFullMask are reset to their default values by the system. Vice versa, when a new (non-default) value is provided for the objects tNetworkIngIPCritSrcIpAddr and tNetworkIngIPCritSrcIpMask or tNetworkIngIPCritSrcIpFullMask then this object is reset to its default (empty) value by the system. An attempt to set tNetworkIngIPCritSrcIpPrefixList to a non-default value in combination with setting any of tNetworkIngIPCritSrcIpAddr and tNetworkIngIPCritSrcIpMask or tNetworkIngIPCritSrcIpFullMask to (a) non-default value(s) is rejected by the system.

OBJECT-TYPE

The value of tNetworkIngIPCritDstIpPrefixList specifies the IP prefix list used as match criterion for the destination ip address. The value specified for this object must correspond to a prefix list defined in tQosPrefixListTable. If the value of this object is empty then the values of the objects tNetworkIngIPCritDstIpAddr and tNetworkIngIPCritDstIpMask or tNetworkIngIPCritDstIpFullMask are used as destination ip address match criterion. When this object is set to a non-empty value then the objects tNetworkIngIPCritDstIpAddr, tNetworkIngIPCritDstIpMask and tNetworkIngIPCritDstIpFullMask are reset to their default values by the system. Vice versa, when a new (non-default) value is provided for the objects tNetworkIngIPCritDstIpAddr and tNetworkIngIPCritDstIpMask or tNetworkIngIPCritDstIpFullMask then this object is reset to its default (empty) value by the system. An attempt to set tNetworkIngIPCritDstIpPrefixList to a non-default value in combination with setting any of tNetworkIngIPCritDstIpAddr and tNetworkIngIPCritDstIpMask or tNetworkIngIPCritDstIpFullMask to (a) non-default value(s) is rejected by the system.

OBJECT-TYPE

The value of tNetworkEgrIPCritTable maintains the entries for matching of IP/IPv6 packets on egress network Qos policy.

OBJECT-TYPE

Information about a particular egress IP/IPv6 matching criteria entry. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tNetworkEgrIPCritType specifies the address type this entry should match against.

OBJECT-TYPE

The value of tNetworkEgrIPCritIndex specifies the IP criteria entry index for network egress Qos policy.

OBJECT-TYPE

The value of tNetworkEgrIPCritRowStatus is used for the creation and deletion of IP criteria entries for network egress Qos policy.

OBJECT-TYPE

The value of tNetworkEgrIPCritLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of tNetworkEgrIPCritDescription specifies a description of IP criteria entry for network egress Qos policy.

OBJECT-TYPE

The value of tNetworkEgrIPCritActionFC specifies the forwarding class to be used to classify all the traffic that matches the specific IP criteria. The value ''H indicates that the FC is derived from egress classification and profiling functions.

OBJECT-TYPE

The value of tNetworkEgrIPCritActionProfile specifies the profile of the packets associated with the forwarding class specified by tNetworkEgrIPCritActionFC. The value of 'de' is not supported.

OBJECT-TYPE

The value of tNetworkEgrIPCritActionQGrpPlcr specifies the policer identifier to be used for the traffic matching this IP Criteria entry. An 'inconsistentValue' error is returned if the value of tNetworkEgrIPCritActionQGrpPlcr is set to a non-default value when the value of tSapEgrIPCritRowStatus is set to 'notInService.

OBJECT-TYPE

The value of tNetworkEgrIPCritActionQGrpQueue specifies queue to use once traffic matching this IP Criteria entry has been policed by the local policer tNetworkEgrIPCritActionQGrpPlcr. An 'inconsistentValue' error is returned if the value of tNetworkEgrIPCritActionQGrpQueue is set to a non-default value when the value of tSapEgrIPCritRowStatus is set to 'notInService.

OBJECT-TYPE

The value of tNetworkEgrIPCritSrcIpAddrType specifies the address type of tNetworkEgrIPCritSrcIpAddr. If the value of this object is not 'unknown (0)', it must have the same value as tNetworkEgrIPCritType.

OBJECT-TYPE

The value of tNetworkEgrIPCritSrcIpAddr specifies the IP address to match with source IP of the packet.

OBJECT-TYPE

The value of tNetworkEgrIPCritSrcIpMask specifies the mask value for this policy IP criteria entry. The mask is ANDed with the received source IP address to match the tNetworkEgrIPCritSrcIpAddr. If the value of tNetworkEgrIPCritSrcIpMask is zero and the value of tNetworkEgrIPCritSrcIpFullMask is non-zero, then the value of tNetworkEgrIPCritSrcIpFullMask is used as mask. If both tNetworkEgrIPCritSrcIpMask and tNetworkEgrIPCritSrcIpFullMask are set to 0, no matching is done on the source IP address. If a value is specified for this object, then the value of the tNetworkEgrIPCritSrcIpFullMask will be set to reflect this same mask.

OBJECT-TYPE

The value of tNetworkEgrIPCritSrcIpFullMask specifies the mask value for this policy IP criteria entry. The mask is ANDed with the received source IP address to match the tNetworkEgrIPCritSrcIpAddr. If the value of tNetworkEgrIPCritSrcIpMask is zero and the value of tNetworkEgrIPCritSrcIpFullMask is non-zero, then the value of tNetworkEgrIPCritSrcIpFullMask is used as mask. If both tNetworkEgrIPCritSrcIpMask and tNetworkEgrIPCritSrcIpFullMask are set to 0, no matching is done on the Source IP address. If a regular mask is specified for tNetworkEgrIPCritSrcIpFullMask, then the value of tNetworkEgrIPCritSrcIpMask will be changed to reflect this value.

OBJECT-TYPE

The value of tNetworkEgrIPCritDstIpAddrType specifies the address type of tNetworkEgrIPCritDstIpAddr. If the value of this object is not 'unknown (0)', it must have the same value as tNetworkEgrIPCritType.

OBJECT-TYPE

The value of tNetworkEgrIPCritDstIpAddr specifies the IP address to match with destination IP of the packet.

OBJECT-TYPE

The value of tNetworkEgrIPCritDstIpMask specifies the mask value for this policy IP criteria entry. The mask is ANDed with the received destination IP address to match the tNetworkEgrIPCritDstIpAddr. If the value of tNetworkEgrIPCritDstIpMask is zero and the value of tNetworkEgrIPCritDstIpFullMask is non-zero, then the value of tNetworkEgrIPCritDstIpFullMask is used as mask. If both tNetworkEgrIPCritDstIpMask and tNetworkEgrIPCritDstIpFullMask are set to 0, no matching is done on the source IP address. If a value is specified for this object, then the value of the tNetworkEgrIPCritDstIpFullMask will be set to reflect this same mask.

OBJECT-TYPE

The value of tNetworkEgrIPCritDstIpFullMask specifies the mask value for this policy IP criteria entry. The mask is ANDed with the received destination IP address to match the tNetworkEgrIPCritDstIpAddr. If the value of tNetworkEgrIPCritDstIpMask is zero and the value of tNetworkEgrIPCritDstIpFullMask is non-zero, then the value of tNetworkEgrIPCritDstIpFullMask is used as mask. If both tNetworkEgrIPCritDstIpMask and tNetworkEgrIPCritDstIpFullMask are set to 0, no matching is done on the Source IP address. If a regular mask is specified for tNetworkEgrIPCritDstIpFullMask, then the value of tNetworkEgrIPCritDstIpMask will be changed to reflect this value.

OBJECT-TYPE

The value of tNetworkEgrIPCritProtocol specifies the IP protocol to match. The value '-1' is used to disable matching by IP protocol.

OBJECT-TYPE

The value of tNetworkEgrIPCritSrcPortValue1 specifies the first TCP/UDP source port value. The value of this object is used according to the value of tNetworkEgrIPCritSrcPortOperator.

OBJECT-TYPE

The value of tNetworkEgrIPCritSrcPortValue2 specifies the second TCP/UDP source port value. The value of this object is used according to the value of tNetworkEgrIPCritSrcPortOperator.

OBJECT-TYPE

The value of tNetworkEgrIPCritSrcPortOperator specifies the manner in which tNetworkEgrIPCritSrcPortValue1 and tNetworkEgrIPCritSrcPortValue2 are to be used.

OBJECT-TYPE

The value of tNetworkEgrIPCritDstPortValue1 specifies the first TCP/UDP destination port value. The value of this object is used according to the value of tNetworkEgrIPCritDstPortOperator.

OBJECT-TYPE

The value of tNetworkEgrIPCritDstPortValue2 specifies the second TCP/UDP destination port value. The value of this object is used according to the value of tNetworkEgrIPCritDstPortOperator.

OBJECT-TYPE

The value of tNetworkEgrIPCritDstPortOperator specifies the manner in which tNetworkEgrIPCritDstPortValue1 and tNetworkEgrIPCritDstPortValue2 are to be used.

OBJECT-TYPE

The value of tNetworkEgrIPCritDSCP specifies the DSCP value to match in the packet

OBJECT-TYPE

The value of tNetworkEgrIPCritFragment specifies matching criteria to be used for fragmented or non-fragmented packets. off (1) - match all packets regardless of fragmented or not. false (2) - match all non-fragmented packets. true (3) - match all fragmented packets. firstOnly (4) - match only the initial packet fragment. nonFirstOnly (5) - match non-initial packet fragment. The values 'firstOnly (4)' and 'nonFirstOnly (5)' are supported only when the value of tNetworkEgrIPCritType is set to 'ipv6 (2)'.

OBJECT-TYPE

The value of tNetworkEgrIPCritIcmpType specifies the ICMP type to be matched. The value -1 means ICMP type matching is not enabled.

OBJECT-TYPE

OBJECT-TYPE

Information about a particular Network Ingress Policy. network policy (default) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus.

OBJECT-TYPE

The value of tNetIngPlcyName specifies the name to associate with this policy.

OBJECT-TYPE

The value of tNetIngPlcyRowStatus allows entries to be created and deleted in the tNetIngPlcyTable.

OBJECT-TYPE

The value of tNetIngPlcyScope specifies the scope of this network ingress policy.

OBJECT-TYPE

tNetIngPlcyDescription holds the description for this policy.

OBJECT-TYPE

Timestamp of last change to this row in tNetIngPlcyTable.

OBJECT-TYPE

Attach ingress classification policy

OBJECT-TYPE

This table maintains the mapping of a particular forwarding class traffic into the specified queue.

OBJECT-TYPE

Information about a particular network-ingress policy's forwarding class mappings to queues. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.

OBJECT-TYPE

The value of tNetIngPlcyFCName specifies the name of the forwarding class (FC).

OBJECT-TYPE

The value of tNetIngPlcyFCRowStatus allows entries to be created and deleted in the tNetIngPlcyFCTable.

OBJECT-TYPE

The value of tNetIngPlcyFCLastChanged indicates the sysUpTime for the last change to this entry.

OBJECT-TYPE

The value of tNetIngPlcyFCMCastPlcr specifies the policer to be used for multicast traffic for this forwarding class.

OBJECT-TYPE

The value of tNetIngPlcyFCUniCastPlcr specifies the policer to be used for unicast traffic for this forwarding class.

OBJECT-TYPE

tNetIngPlcyPolicerTable defines Network Ingress Policer Table for providing, via SNMP, the capability of defining the policers. tNetIngPlcyPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings.

OBJECT-TYPE

tNetIngPlcyPolicerEntry defines an entry in the tNetIngPlcyPolicerTable. Entries are created/deleted in this table by SNMP sets to tNetIngPlcyPolicerRowStatus.

OBJECT-TYPE

tNetIngPlcyPolicerId defines the Network Ingress Policer identifier. It identifies an ingress policer in the managed system.

OBJECT-TYPE

tNetIngPlcyPolicerRowStatus allows entries to be created and deleted in the tNetIngPlcyPolicerTable.

OBJECT-TYPE

The value of tNetIngPlcyPolicerPIRHi specifies the upper 32 bits of the administrative PIR specified by the user. This value should always be set along with tNetIngPlcyPolicerPIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tNetIngPlcyPolicerPIRHi along with the value of tNetIngPlcyPolicerPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tNetIngPlcyPolicerPIRLo specifies the lower 32 bits of the administrative PIR specified by the user. This value should always be set along with tNetIngPlcyPolicerPIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tNetIngPlcyPolicerPIRHi along with the value of tNetIngPlcyPolicerPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tNetIngPlcyPolicerCIRHi specifies the upper 32 bits of the administrative CIR specified by the user. This value should always be set along with tNetIngPlcyPolicerCIRLo, otherwise an 'inconsistentValue' error is returned. When the value of tNetIngPlcyPolicerCIRHi along with the value of tNetIngPlcyPolicerCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tNetIngPlcyPolicerCIRLo specifies the lower 32 bits of the administrative CIR specified by the user. This value should always be set along with tNetIngPlcyPolicerCIRHi, otherwise an 'inconsistentValue' error is returned. When the value of tNetIngPlcyPolicerCIRHi along with the value of tNetIngPlcyPolicerCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this queue indicates maximum rate.

OBJECT-TYPE

The value of tNetIngPlcyPolicerStatMode specifies the mode of statistics collected by this policer.

OBJECT-TYPE

The tNetIngPlcyPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.

OBJECT-TYPE

The tNetIngPlcyPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.

OBJECT-TYPE

The value of tNetIngPlcyPolicerCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.

OBJECT-TYPE

The value of tNetIngPlcyPolicerPIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.

OBJECT-TYPE

The value of tNetIngPlcyPolicerLastChanged indicates the sysUpTime for the last change to this entry.

OBJECT-IDENTITY

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

The value of tNetworkQueuePolicyEHWrrPlcy specifies the Weighted Round Robin (WRR) policy to use on this HSMDA egress queue.

OBJECT-TYPE

The value of tNetworkQueuePolicyEHPktBOffst specifies the packet byte offset to use for the HSMDA egress queues. This value is used for the adjustment to make to the size of each packet for HSMDA queue accounting.

OBJECT-TYPE

The value of tNetworkQueuePolicyHsAttachPlcy specifies the HS attachment policy defined in tHsAttachPlcyTable.

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

The queue ID is used as the secondary index to the table entry.

OBJECT-TYPE

Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

The tNetworkQueuePoolName specifies the pool that is associated with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue.

OBJECT-TYPE

The scheduler to which this queue would be feeding to. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

This specifies the level of priority while feeding to the parent. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The weight that needs to be used by the scheduler to which this queue would be feeding to. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

This object specifies if this is a multicast queue or not.

OBJECT-TYPE

tNetworkQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.

OBJECT-TYPE

The percentage of max rate allowed.

OBJECT-TYPE

The percentage of max rate allowed.

OBJECT-TYPE

The percentage of reserved buffer space for the queue, defined to two decimal places.

OBJECT-TYPE

The percentage of reserved buffer space for the queue, defined to two decimal places.

OBJECT-TYPE

The percentage of buffer space for the queue, used exclusively by high priority packets. This object is obsoleted in 15.0 release and has been replaced with tNetworkQDrpTailLowReductnMbs object.

OBJECT-TYPE

The value of the object tNetworkQueueLastChanged indicates the timestamp of last change to this row in tNetworkQueueTable.

OBJECT-TYPE

The value of the object tNetworkQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler.

OBJECT-TYPE

The value of the object tNetworkQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. An 'inconsistentValue' error is returned if the value of tNetworkQueuePortLvl is set to non-default value when the value of object tNetworkQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tNetworkQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. An 'inconsistentValue' error is returned if the value of tNetworkQueuePortWght is set to non-default value when the value of object tNetworkQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tNetworkQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. An 'inconsistentValue' error is returned if the value of tNetworkQueuePortCIRLvl is set to non-default value when the value of object tNetworkQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tNetworkQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. An 'inconsistentValue' error is returned if the value of tNetworkQueuePortCIRWght is set to non-default value when the value of object tNetworkQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of tNetworkQueuePortAvgOverhead specifies the encapsulation overhead, in centipercent, used to translate packet-based rate to frame-based rate and vice versa.

OBJECT-TYPE

The value of tNetworkQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.

OBJECT-TYPE

The value of tNetworkQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.

OBJECT-TYPE

The value of tNetworkQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by tNetworkQueueMBS.

OBJECT-TYPE

The value of tNetworkQueueHsMBS specifies percentage of reserved buffer space for the queue.

OBJECT-TYPE

The value of tNetworkQueueHsWrrWeight specifies the Weighted Round Robin (WRR) weight which this queue should parent into the scheduler. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.

OBJECT-TYPE

The value of tNetworkQueueHsClassWeight specifies the weight of the scheduling class.

OBJECT-TYPE

The value of tNetworkQueueHsWredQSlopePlcy specifies the name of the slope policy to be applied for network-queue queue.

OBJECT-TYPE

The value of tNetworkQueueHsAltClssPool specifies whether the HS alternate class port pool buffer should be used for traffic.

OBJECT-TYPE

The value of tNetworkQueueFIRAdaptation specifies the adaptation rule to be used while computing the operational FIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.

OBJECT-TYPE

The percentage of max rate allowed.

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

Forwarding class name.

OBJECT-TYPE

Row Status for this queue.

OBJECT-TYPE

The specific queue to be used for packets in this forwarding class.

OBJECT-TYPE

The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant.

OBJECT-TYPE

timestamp of last change to this row in tNetworkQueueFCTable.

OBJECT-TYPE

The value of tNetworkQueueFCEgrHsmdaQueue specifies the egress hsmda queue to be used for packets in this forwarding class. This is only applicable on supported hsmda ports.

OBJECT-TYPE

The tNetworkEgrHsmdaQueueTable contains the information about all network egress policies on HSMDA queues. Entries in this table are created whenever a network queue policy is created in tNetworkQueuePolicyEntry.

OBJECT-TYPE

Each entry in tNetworkEgrHsmdaQueueEntry represents the information about a particular HSMDA queue for a network egress policy specified by tNetworkEgrHsmdaQueue.

OBJECT-TYPE

The value of tNetworkEgrHsmdaQueue indicates the HSMDA queue ID used as the secondary index to the table entry.

OBJECT-TYPE

The value of tNetworkEgrHsmdaQueuePIRPercent specifies the queue's PIR expressed as a percentage of port line rate.

OBJECT-TYPE

The value of tNetworkEgrHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tNetworkEgrHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.

OBJECT-TYPE

The value of tNetworkEgrHsmdaQueueMBS specifies the maximum amount of buffer space, in bytes, allowed for this network egress HSMDA queue.

OBJECT-TYPE

The value of tNetworkEgrHsmdaQueueSlopePolicy specifies the slope policy on this network egress HSMDA queue. The slope policy defines the WRED slope behavior for this queue.

OBJECT-TYPE

The value of tNetworkEgrHsmdaQueueLastChanged indicates the sysUpTime for the last change to this row.

OBJECT-TYPE

The value of tNetworkEgrHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.

OBJECT-TYPE

The tNetworkQueueHsWrrGrpTable contains HS WRR (Weighted Round Robin) group information on network-queue policies. Entries in this table are created whenever a network-queue policy is created in tNetworkQueuePolicyEntry.

OBJECT-TYPE

Each entry in tNetworkQueueHsWrrGrpEntry represents the information about a particular HS WRR Group specified by tNetworkQueueHsWrrGrpId.

OBJECT-TYPE

The value of tNetworkQueueHsWrrGrpId indicates the HS WRR group identifier.

OBJECT-TYPE

The value of tNetworkQueueHsWrrGrpLastChanged indicates the sysUpTime for the last change to this row.

OBJECT-TYPE

The value of tNetworkQueueHsWrrGrpRatePercent specifies the queue's PIR expressed as a percentage of line rate.

OBJECT-TYPE

The value of tNetworkQueueHsWrrGrpPIRAdaption specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tNetworkQueueHsWrrGrpClassWeight specifies the weight of scheduling class.

OBJECT-IDENTITY

OBJECT-TYPE

Defines the Nokia SROS series Shared Queue Policy Table for providing, via SNMP, the capability of defining the queue policies. tSharedQueuePolicyTable holds a list of all shared queue policies in the managed system. Shared queue policies should exist in this table before being referenced elsewhere. There is a default queue policy 'default' created by the agent and can not be deleted.

OBJECT-TYPE

Defines an entry in the tSharedQueuePolicyTable. Entries are created and deleted in this table by SNMP sets to tSharedQueuePolicyRowStatus.

OBJECT-TYPE

tSharedQueuePolicy serves as an index and uniquely identifies a queue policy in the managed system.

OBJECT-TYPE

tSharedQueuePolicyRowStatus allows entries to be created and deleted in the tSharedQueuePolicyTable. The deletion of an entry in this table will fail if the action is performed on the default policy or the policy is being used within the system.

OBJECT-TYPE

tSharedQueuePolicyLastChanged indicates the value of sysUpTime when the queue policy entry was last modified.

OBJECT-TYPE

tSharedQueuePolicyDescription specifies the user provided description string for this queue policy entry. It can consist of only the printable, seven-bit ASCII characters.

OBJECT-TYPE

Defines the Nokia SROS series Shared Queue Table for providing, via SNMP, the capability of defining the queues for the shared queue policies existing in the tSharedQueuePolicyTable. tSharedQueueTable holds a list of all the shared queues in the managed system defined for the queue policies. Queues should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSharedQueueFCTable. There is a default queue with the queue identifier '1' which gets created automatically when a new queue policy is created.

OBJECT-TYPE

Defines an entry in the tSharedQueueTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueRowStatus. An exception to this rule is the default queue. The default queue is created/deleted as a result of the creation/deletion of a new queue policy in the tSharedQueuePolicyTable.

OBJECT-TYPE

tSharedQueueId serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a shared queue in the managed system.

OBJECT-TYPE

tSharedQueueRowStatus allows entries to be created and deleted in the tSharedQueueTable. The deletion of an entry in this table will fail if the action is performed on the default queue or if the queue is being referenced by a forwarding class mapping in the queue policy.

OBJECT-TYPE

tSharedQueueLastChanged indicates the value of sysUpTime when the queue entry was last modified.

OBJECT-TYPE

tSharedQueuePoolName specifies the pool from which the queue should be allocating its buffer. By default it will share the default pool being used by the entity where the queue is instantiated.

OBJECT-TYPE

tSharedQueueParent specifies the scheduler to which this queue should be feeding into. By default there would be no parent for the queue and it will be controlled by the entity where the queue is instantiated. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

tSharedQueueLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is exceeding the committed rate. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

tSharedQueueWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is exceeding the committed rate. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

tSharedQueueCIRLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is conforming to the committed rate. The level '0' means treat all offered load for this queue same as the load which is exceeding the committed rate. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

tSharedQueueCIRWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is conforming to the committed rate. This object is obsoleted in 14.0 Release.

OBJECT-TYPE

tSharedQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue.

OBJECT-TYPE

tSharedQueueCIR specifies the committed rate as a percentage of maximum rate for this queue.

OBJECT-TYPE

tSharedQueuePIR specifies the peak rate as a percentage of maximum rate for this queue.

OBJECT-TYPE

tSharedQueueCBS specifies the committed burst size as a percentage of maximum reserved buffer space for the queue.

OBJECT-TYPE

tSharedQueueMBS specifies the maximum burst size as a percentage of maximum reserved buffer space for the queue.

OBJECT-TYPE

tSharedQueueHiPrioOnly specifies the percentage of buffer space to be exclusively by high priority packets as a percentage of maximum reserved buffer space for the queue. This object is obsoleted in 15.0 release and has been replaced with tSharedQDrpTailLowReductnMbs object.

OBJECT-TYPE

The value of tSharedQueueIsMultipoint specifies whether this shared queue is a multipoint-shared queue. This object can only be modified at row creation time; any attempt to set it after creation is silently ignored.

OBJECT-TYPE

The value of tSharedQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by tSharedQueueMBS.

OBJECT-TYPE

tSharedQueueFIR specifies the urgent rate as a percentage of maximum rate for this queue.

OBJECT-TYPE

Defines the Nokia SROS series forwarding class to shared queue mapping table for providing, via SNMP, the capability of defining the forwarding class to shared queue mapping for the queue policies existing in the tSharedQueuePolicyTable. tSharedQueueFCTable holds a list of forwarding class to queue mappings managed system defined for the queue policies. The forwarding classes which are not existing in this table should use the default shared queue for this policy.

OBJECT-TYPE

Defines an entry in the tSharedQueueFCTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueFCRowStatus.

OBJECT-TYPE

tSharedQueueFCName serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a forwarding class to queue mapping in the managed system.

OBJECT-TYPE

tSharedQueueFCRowStatus allows entries to be created and deleted in the tSharedQueueFCTable. Deletion of an entry from this table will cause the forwarding class to use the default mapping.

OBJECT-TYPE

tSharedQueueFCLastChanged indicates the value of sysUpTime when the forwarding class to queue mapping entry was last modified.

OBJECT-TYPE

tSharedQueueFCQueue specifies the logical queue that the traffic classified into this forwarding class should use.

OBJECT-TYPE

The value of tSharedQueueFCMCastQueue specifies the logical queue that mutlticast traffic classified into this forwarding class should use.

OBJECT-TYPE

The value of tSharedQueueFCBCastQueue specifies the logical queue that broadcast traffic classified into this forwarding class should use.

OBJECT-TYPE

The value of tSharedQueueFCUnknownQueue specifies the logical queue that unknown traffic classified into this forwarding class should use.

OBJECT-TYPE

tQosIngQGroupTable defines Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosIngQueueTable. tQosIngQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.

OBJECT-TYPE

tQosIngQGroupEntry defines an entry in the tQosIngQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosIngQGroupRowStatus.

OBJECT-TYPE

tQosIngQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.

OBJECT-TYPE

tQosIngQGroupRowStatus allows entries to be created and deleted in the tQosIngQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.

OBJECT-TYPE

tQosIngQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.

OBJECT-TYPE

tQosIngQGroupDescr specifies the description of the queue-group.

OBJECT-TYPE

tQosIngQueueTable defines all ingress queues.

OBJECT-TYPE

tQosIngQueueEntry defines a particular ingress queue. Entries are created by user by setting tQosIngQueueRowStatus.

OBJECT-TYPE

tQosIngQueue specifies the queue ID which is used as the secondary index to the table entry.

OBJECT-TYPE

tQosIngQueueRowStatus is the row status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

tQosIngQueueParent specifies the scheduler to which this queue would be feeding.

OBJECT-TYPE

tQosIngQueueLevel specifies the level of priority while feeding the parent.

OBJECT-TYPE

tQosIngQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.

OBJECT-TYPE

tQosIngQueueCIRLevel specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.

OBJECT-TYPE

tQosIngQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.

OBJECT-TYPE

tQosIngQueueMCast specifies if this is a multicast queue.

OBJECT-TYPE

tQosIngQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.

OBJECT-TYPE

tQosIngQueueCBS specifies the amount of reserved buffer space for the queue.

OBJECT-TYPE

tQosIngQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosIngQueueMBSBytes object.

OBJECT-TYPE

tQosIngQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets. This object is obsoleted in 15.0 release and has been replaced with tQosIngQDrpTailLowReductnMbs object.

OBJECT-TYPE

tQosIngQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

tQosIngQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

tQosIngQueueAdminPIR specifies the administrative PIR specified by the user.

OBJECT-TYPE

tQosIngQueueAdminCIR specifies the administrative CIR specified by the user. The value of object tQosIngQueueAdminCIR and tQosIngQueuePoliced should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned. Both objects tQosIngQueueAdminCIR and tQosIngQueuePoliced can not be set to non-default values together.

OBJECT-TYPE

tQosIngQueueLastChanged indicates the timestamp of last change to this row in tQosIngQueueTable.

OBJECT-TYPE

tQosIngQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tQosIngQueuePoliced overrides the bandwidth specified by the object tQosIngQueueAdminCIR. The value of object tQosIngQueueAdminCIR and tQosIngQueuePoliced should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned. Both objects tQosIngQueueAdminCIR and tQosIngQueuePoliced can not be set to non-default values together.

OBJECT-TYPE

tQosIngQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.

OBJECT-TYPE

tQosIngQueuePoolName specifies the name of the pool to be applied for the ingress queue.

OBJECT-TYPE

tQosIngQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.

OBJECT-TYPE

The value of tQosIngQueueBurstLimit specifies the explicit shaping burst size of a queue.

OBJECT-TYPE

The value of tQosIngQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.

OBJECT-TYPE

The value of tQosIngQueuePktOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for queue accounting. A 'wrongValue' error is returned while trying to set odd values for this object. This object is only supported for queues residing on FP2 or greater forwarding planes. It is ignored for queues on FP1 forwarding planes.

OBJECT-TYPE

The value of tQosIngQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by tQosIngQueueMBSBytes.

OBJECT-TYPE

tQosIngQueueFIRAdaptation specifies the adaptation rule to be used while computing the operational FIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

tQosIngQueueAdminFIR specifies the administrative FIR specified by the user. The value of object tQosIngQueueAdminFIR and tQosIngQueuePoliced should be set together in the same snmp request, otherwise an 'inconsistentValue' error is returned. Both objects tQosIngQueueAdminFIR and tQosIngQueuePoliced can not be set to non-default values together.

OBJECT-TYPE

tQosIngQueueCIRNonProfiling specifies the CIR to affect the scheduling priority of a queue but does not modify the profile of packets depending on the specified CIR.

OBJECT-TYPE

tQosEgrQGroupTable defines the Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosEgrQueueTable. tQosEgrQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.

OBJECT-TYPE

tQosEgrQGroupEntry defines an entry in the tQosEgrQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosEgrQGroupRowStatus.

OBJECT-TYPE

tQosEgrQGroupName defines the Egress Queue Group name. It uniquely identifies an egress queue group in the managed system.

OBJECT-TYPE

tQosEgrQGroupRowStatus allows entries to be created and deleted in the tQosEgrQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.

OBJECT-TYPE

tQosEgrQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.

OBJECT-TYPE

tQosEgrQGroupDescr specifies the description of the queue-group.

OBJECT-TYPE

The value of tQosEgrQGroupHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting.

OBJECT-TYPE

The value of tQosEgrQGroupHsmdaWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy to use.

OBJECT-TYPE

The value of tQosEgrQGroupHsmdaLowBrstMaxCls specifies which class should use the low priority burst threshold. Use the low priority burst threshold for all classes starting from 1, up to and including that specified by tQosEgrQGroupHsmdaLowBrstMaxCls. Use the high priority burst threshold for all classes greater than the value of tQosEgrQGroupHsmdaLowBrstMaxCls, up to and including class 8.

OBJECT-TYPE

The value of tQosEgrQGroupQsHqosManageable specifies whether the queues within this egress queue-group are to be managed by the Hierarchical QoS process when this queue-group is applied to an ethernet egress access or network port.

OBJECT-TYPE

The value of tQosEgrQGroupHsAttachPlcy specifies the HS attachment policy defined in tHsAttachPlcyTable.

OBJECT-TYPE

tQosEgrQueueTable defines all egress queues.

OBJECT-TYPE

tQosEgrQueueEntry defines a particular egress queue. Entries are created and deleted by user.

OBJECT-TYPE

The value of tQosEgrQueue identifies the queue index which is used as the second index to the table entry. Zero is not allowed.

OBJECT-TYPE

This is the Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

The value of tQosEgrQueueParent specifies the scheduler to which this queue would be feeding.

OBJECT-TYPE

The value of tQosEgrQueueLevel specifies the level of priority while feeding the parent.

OBJECT-TYPE

The value of tQosEgrQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.

OBJECT-TYPE

The value of tQosEgrQueueCIRLevel specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.

OBJECT-TYPE

The value of tQosEgrQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.

OBJECT-TYPE

The value of tQosEgrQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers.

OBJECT-TYPE

The value of tQosEgrQueueCBS specifies the amount of reserved buffer space for the queue.

OBJECT-TYPE

The value of tQosEgrQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosEgrQueueMBSBytes object.

OBJECT-TYPE

The value of tQosEgrQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets. This object is obsoleted in 15.0 release and has been replaced with tQosEgrQDrpTailLowReductnMbs object.

OBJECT-TYPE

The value of tQosEgrQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tQosEgrQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tQosEgrQueueAdminPIR specifies the administrative PIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.

OBJECT-TYPE

The value of tQosEgrQueueAdminCIR specifies the administrative CIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.

OBJECT-TYPE

The value of tQosEgrQueueLastChanged indicates the timestamp of last change to this row in tQosEgrQueueTable.

OBJECT-TYPE

The value of tQosEgrQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tQosEgrQueueParent. Only one kind of parent is allowed.

OBJECT-TYPE

The value of the object tQosEgrQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. An 'inconsistentValue' error is returned if the value of tQosEgrQueuePortLvl is set to non-default value when the value of object tQosEgrQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tQosEgrQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. An 'inconsistentValue' error is returned if the value of tQosEgrQueuePortWght is set to non-default value when the value of object tQosEgrQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tQosEgrQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. An 'inconsistentValue' error is returned if the value of tQosEgrQueuePortCIRLvl is set to non-default value when the value of object tQosEgrQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of the object tQosEgrQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. An 'inconsistentValue' error is returned if the value of tQosEgrQueuePortCIRWght is set to non-default value when the value of object tQosEgrQueueUsePortParent is 'false'.

OBJECT-TYPE

The value of tQosEgrQueuePoolName specifies the name of the pool to be applied for SAP egress queue.

OBJECT-TYPE

The value of tQosEgrQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning. This object is obsoleted in 14.0 release and replaced by tQosEgrQueueWredQMode.

OBJECT-TYPE

The value of tQosEgrQueueXPWredQSlope specifies the name of the slope policy to be applied for QOS egress queue. When tQosEgrQueueXPWredQ has the value 'false', an 'inconsistentValue' error is returned if an attempt is made to set this object to a value other than 'default'.

OBJECT-TYPE

The value of tQosEgrQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.

OBJECT-TYPE

The value of tQosEgrQueueAdminPIRPercent specifies the administrative PIR percentage, in centipercent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.

OBJECT-TYPE

The value of tQosEgrQueueAdminCIRPercent specifies the administrative CIR percentage, in centipercent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.

OBJECT-TYPE

The value of tQosEgrQueueRateType specifies the type of Egress queue rate. When the value of the object is set to 'kbps', the egresss queue rates are specified in kbps. The objects tQosEgrQueueAdminCIRPercent and tQosEgrQueueAdminPIRPercent will be set to their default values. When the value of the object is set to 'percentPortLimit' or 'percentLocalLimit' or 'percentReferPortLimit', the egress queue rates are specified in percentage. The objects tQosEgrQueueAdminCIR and tQosEgrQueueAdminPIR will be set to their default values.

OBJECT-TYPE

The value of tQosEgrQueueBurstLimit specifies the explicit shaping burst size of a queue.

OBJECT-TYPE

The value of tQosEgrQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.

OBJECT-TYPE

The value of tQosEgrQueuePktOffset specifies the packet byte offset to be applied with this queue.

OBJECT-TYPE

The value of tQosEgrQueueHiLowPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority (exceed-profile) packets. This object is obsoleted in 15.0 release and has been replaced with tQosEgrQDrpTailExcdReductnMbs object.

OBJECT-TYPE

The value of tQosEgrQueueWredQMode specifies the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes. When the value of this object is set to 'native (1)', the queues draw buffers from FP megapool. When the value of this object is set to 'poolPerQueue (2)', the queues draw buffers from a dedicated buffer pool per queue. The value of tQosEgrQueueWredQSlopeUsage can be set to 'default (1)', when the value of tQosEgrQueueWredQMode is set to 'poolPerQueue (2)' and the value of tQosEgrQueueWredQSlopeUsage can be set to 'exceedLow (2)', when the value of tQosEgrQueueWredQMode is set to 'native (1)'.

OBJECT-TYPE

The value of tQosEgrQueueWredQSlopeUsage specifies which slopes are active for given slope-mode specified by tQosEgrQueueWredQMode. When the value of this object is set to 'default (1)', the traffic is subjected to slopes configured under tSlopePolicyTable. When the value of this object is set to 'exceedLow (2)', the traffic is subjected to two slopes (low and exceed) configured under tSlopePolicyTable and a drop tail. The value of tQosEgrQueueWredQSlopeUsage can be set to 'default (1)', when the value of tQosEgrQueueWredQMode is set to 'poolPerQueue (2)' and the value of tQosEgrQueueWredQSlopeUsage can be set to 'exceedLow (2)', when the value of tQosEgrQueueWredQMode is set to 'native (1)'.

OBJECT-TYPE

The value of tQosEgrQueueDynamicMbs specifies whether to enable the support for dynamically modifying the MBS size of a queue in order to maintain the maximum latency for traffic in the queue based on the queue's configured MBS and the ratio of its operational PIR to its admin PIR.

OBJECT-TYPE

The value of tQosEgrQueueQueueDelay specifies the target queue-delay for packets forward through this queue.

OBJECT-TYPE

The value of tQosEgrQDrpTailExcdReductnMbs specifies the percentage at which exceed drop tail is being reduced from the MBS specified by tQosEgrQueueMBSBytes.

OBJECT-TYPE

The value of tQosEgrQDrpTailHiPlusReductnMbs specifies the percentage at which highplus drop tail is being reduced from the MBS specified by tQosEgrQueueMBSBytes.

OBJECT-TYPE

The value of tQosEgrQDrpTailLowReductnMbs specifies the percentage at which low drop tail is being reduced from the MBS specified by tQosEgrQueueMBSBytes.

OBJECT-TYPE

The value of tQosEgrQDrpTailHighReductnMbs specifies the percentage at which high drop tail is being reduced from the MBS specified by tQosEgrQueueMBSBytes.

OBJECT-TYPE

The value of tQosEgrQueueHsWrrWeight specifies the Weighted Round Robin (WRR) weight which this queue should parent into the scheduler. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.

OBJECT-TYPE

The value of tQosEgrQueueHsClassWeight specifies the weight of the scheduling class.

OBJECT-TYPE

The value of tQosEgrQueueHsWredQSlopePlcy specifies the name of the slope policy to be applied for egress queue-group templates queue.

OBJECT-TYPE

The value of tQosEgrQueueHsAltClssPool specifies whether the HS alternate class port pool buffer should be used for traffic.

OBJECT-TYPE

This table maintains the information of forwarding classes in a egress queue group.

OBJECT-TYPE

Information about a particular queue group's forwarding class.

OBJECT-TYPE

The value of the object tQosEgrQGroupFCName specifies the name of the forwarding class

OBJECT-TYPE

The value of tQosEgrQGroupFCRowStatus specifies the Row Status for this entry.

OBJECT-TYPE

The value of tQosEgrQGroupFCLastChanged indicates the timestamp of last change to this row in tQosEgrQGroupFCTable.

OBJECT-TYPE

The value of tQosEgrQGroupFCQueue specifies the queue to be used for the packets in this forwarding class.

OBJECT-TYPE

Information about all Queue Group template HSMDA queues.

OBJECT-TYPE

Information about a particular HSMDA queue in a queue group template. Entries are created by the system when a Queue group template tQosEgrQGroupName is created. Individual HSMDA queue properties can be modified by the user.

OBJECT-TYPE

The HSMDA queue ID is used as the secondary index to the table entry.

OBJECT-TYPE

The value of tQosEgrHsmdaQueueRowStatus is used for the creation and deletion of entries in the tQosEgrHsmdaQueueTable.

OBJECT-TYPE

The value of tQosEgrHsmdaQueueLastChanged indicates the timestamp of last change to this row in tQosEgrHsmdaQueueTable.

OBJECT-TYPE

The value of tQosEgrHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tQosEgrHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.

OBJECT-TYPE

The value of tQosEgrHsmdaQueueSlopePolicy specifies the slope policy specified by the user.

OBJECT-TYPE

The value of tQosEgrHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.

OBJECT-TYPE

The value of tQosEgrHsmdaQueueMBS specifies the maximum amount of buffer space (in bytes) allowed for this HSMDA queue.

OBJECT-TYPE

The value of tQosEgrHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.

OBJECT-TYPE

The tQosEgrQGroupHsWrrGrpTable contains HS WRR (Weighted Round Robin) group information on egress queue-group templates. Entries in this table are created whenever an egress queue-group template is created in tQosEgrQGroupEntry.

OBJECT-TYPE

Each entry in tQosEgrQGroupHsWrrGrpEntry represents the information about a particular HS WRR Group specified by tQosEgrQGroupHsWrrGrpId.

OBJECT-TYPE

The value of tQosEgrQGroupHsWrrGrpId indicates the HS WRR group identifier.

OBJECT-TYPE

The value of tQosEgrQGroupHsWrrGrpLastChanged indicates the sysUpTime for the last change to this row.

OBJECT-TYPE

The value of tQosEgrQGroupHsWrrGrpRateType specifies the rate type for this group. When the value of tQosEgrQGroupHsWrrGrpRateType is set to 'kbps', the group rates are specified in kbps. The object tQosEgrQGroupHsWrrGrpRatePercent will be set to its default values. When the value of tQosEgrQGroupHsWrrGrpRateType is set to 'percent', the group rates are specified in percentage. The object tQosEgrQGroupHsWrrGrpRate will be set to its default value.

OBJECT-TYPE

The value of tQosEgrQGroupHsWrrGrpRate specifies the queue's PIR expressed as a percentage of line rate.

OBJECT-TYPE

The value of tQosEgrQGroupHsWrrGrpRatePercent specifies the group rate percent, in centipercent. An 'inconsistentValue' error is returned if tQosEgrQGroupHsWrrGrpRatePercent is set to non-default value when the object tQosEgrQGroupHsWrrGrpRateType is set to 'kbps'.

OBJECT-TYPE

The value of tQosEgrQGroupHsWrrGrpPIRAdaption specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.

OBJECT-TYPE

The value of tQosEgrQGroupHsWrrGrpClassWeight specifies the weight of scheduling class.

OBJECT-IDENTITY

OBJECT-TYPE

Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic.

OBJECT-TYPE

Slope Policy Entry.

OBJECT-TYPE

tSlopePolicy maintains the name of the slope policy identifying the policy.

OBJECT-TYPE

Row Status of the entry. This allows creation/deletion of rows in this table.

OBJECT-TYPE

User-provided description of the policy.

OBJECT-TYPE

tSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive.

OBJECT-TYPE

The percentage of the buffer utilized after which the drop probability starts to rise above 0.

OBJECT-TYPE

The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.

OBJECT-TYPE

The drop probability increases steadily from 0 at the tSlopeHiStartAverage up to the tSlopeHiMaxProbability at the tSlopeHiMaxAverage.

OBJECT-TYPE

tSlopeLoAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive.

OBJECT-TYPE

The percentage of the buffer utilized after which the drop probability starts to rise above 0.

OBJECT-TYPE

The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.

OBJECT-TYPE

The drop probability increases steadily from 0 at the tSlopeLoStartAverage up to the tSlopeLoMaxProbability at the tSlopeLoMaxAverage.

OBJECT-TYPE

The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.

OBJECT-TYPE

Timestamp of when this entry was last changed.

OBJECT-TYPE

The value of tSlopeExceedAdminStatus specifies the admin state for the exceed priority RED slope. If the tSlopeExceedAdminStatus is set to 'down', the RED slope is inactive.

OBJECT-TYPE

The value of tSlopeExceedStartAverage specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.

OBJECT-TYPE

The value of tSlopeExceedMaxAverage specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.

OBJECT-TYPE

The value of tSlopeExceedMaxProbability the drop probability increases steadily from 0 at the tSlopeExceedStartAverage up to the tSlopeExceedMaxProbability at the tSlopeExceedMaxAverage.

OBJECT-TYPE

The value of tSlopeHighPlusAdminStatus specifies the admin state for the high-plus priority RED slope. If the tSlopeHighPlusAdminStatus is set to 'down', the RED slope is inactive.

OBJECT-TYPE

The value of tSlopeHighPlusStartAverage specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.

OBJECT-TYPE

The value of tSlopeHighPlusMaxAverage specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.

OBJECT-TYPE

The value of tSlopeHighPlusMaxProbability the drop probability increases steadily from 0 at the tSlopeHighPlusStartAverage up to the tSlopeHighPlusMaxProbability at the tSlopeHighPlusMaxAverage.

OBJECT-TYPE

The tHsmdaSlopePolicyTable has an entry for each HSMDA slope policy configured on this system.

OBJECT-TYPE

Each row represents a particular HSMDA slope policy. Entries are created and deleted by the user.

OBJECT-TYPE

The value of tHsmdaSlopePolicyName specifies the name of the HSMDA slope policy.

OBJECT-TYPE

The value of tHsmdaSlopePolicyRowStatus is used for the creation and deletion of HSMDA slope policies.

OBJECT-TYPE

The value of tHsmdaSlopeLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of tHsmdaSlopeDescription specifies the description of this HSMDA slope policy.

OBJECT-TYPE

The value of tHsmdaSlopeQueueMbs specifies the maximum amount of buffer space, in bytes, allowed for any HSMDA queue associated with this HSMDA slope policy. Specifying a value of 0 effectively disables all queues associated with this slope policy causing each queue to discard all packets. This object is obsoleted in 10.0 Release.

OBJECT-TYPE

The value of tHsmdaSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tHsmdaSlopeHiAdminStatus is set to 'disabled', the RED slope is inactive.

OBJECT-TYPE

The value of tHsmdaSlopeHiStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.

OBJECT-TYPE

The value of tHsmdaSlopeHiMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.

OBJECT-TYPE

The value of tHsmdaSlopeHiMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeHiMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeHiStartDepth up to the tHsmdaSlopeHiMaxProbability at the tHsmdaSlopeHiMaxDepth.

OBJECT-TYPE

The value of tHsmdaSlopeLoAdminStatus specifies the admin state for the low priority RED slope. If the tHsmdaSlopeLoAdminStatus is set to 'disabled', the RED slope is inactive.

OBJECT-TYPE

The value of tHsmdaSlopeLoStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.

OBJECT-TYPE

The value of tHsmdaSlopeLoMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.

OBJECT-TYPE

The value of tHsmdaSlopeLoMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeLoMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeLoStartDepth up to the tHsmdaSlopeLoMaxProbability at the tHsmdaSlopeLoMaxDepth.

OBJECT-IDENTITY

OBJECT-TYPE

OBJECT-TYPE

Information about a particular Scheduler Policy.

OBJECT-TYPE

Name of the scheduler policy.

OBJECT-TYPE

Row Status of the entry.

OBJECT-TYPE

Description for the scheduler policy

OBJECT-TYPE

timestamp of last change to this row in tSchedulerPolicyTable.

OBJECT-TYPE

The value of tSchedulerPolicyFrameBasedAccnt specifies whether to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If the value is 'false', the default packet-based accounting method will be used.