TIMETRA-SDP-MIB

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindTblLC indicates the sysUpTime at the time of the last modification of svcTlsBgpADPWTempBindTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

svcTlsBgpADPWTempBindTable contains entries for the associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VPLS service.

OBJECT-TYPE

A SDP Auto-Bind Policy entry in the svcTlsBgpADPWTempBindTable.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindRowStatus is used for the creation and deletion of associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VPLS service.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindSHG specifies the split-horizon group to associate with the SDP Auto-Bind policy in this BGP Auto-Discovery context in a VPLS service. When this Auto-Bind policy is used to create an SDP, this split-horizon group will be associated with the SDP. The name specified must correspond to an existing split-horizon group in the VPLS service, otherwise an 'inconsistentValue' error will be returned.

OBJECT-TYPE

The value of the svcTlsBgpADPWTempBindOperGrp specifies the Operational-Group identifier associated with this pseudo-wire template binding.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindCreatOrigin indicates the mechanism used to create this entry.

OBJECT-TYPE

The value of the svcTlsBgpADPWTempBindBfdTemplate specifies the BFD template name associated with this pseudo-wire template binding.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindBfdEnable specifies whether BFD is enabled on this pseudo-wire template binding.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindBfdEncap specifies the BFD encapsulation used on this pseudo-wire template binding.

OBJECT-TYPE

The value of the svcTlsBgpADPWTempBindMonOperGrp specifies the monitoring operational-group identifier associated with this pseudo-wire template binding.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindRTTblLC indicates the sysUpTime at the time of the last modification of svcTlsBgpADPWTempBindRTTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

svcTlsBgpADPWTempBindTable contains entries for Route Targets associated with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VPLS service.

OBJECT-TYPE

A SDP Auto-Bind Policy Route Target entry in the svcTlsBgpADPWTempBindRTTable.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindRT is the Route Target associated with a PW template and a BGP Auto-Discovery context for a VPLS service. When advertisements are received with this Route Target, the PW template specified by the index, pwTemplateId, will be used to create the SDP.

OBJECT-TYPE

The value of svcTlsBgpADPWTempBindRTRowStat is used for the association of Route Targets with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VPLS service.

OBJECT-TYPE

The value of svcL2RteTableLastChanged indicates the sysUpTime at the time of the last modification of svcL2RteTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

svcL2RteTable contains entries for L2 routes.

OBJECT-TYPE

An L2 route entry in the svcL2RteTable.

OBJECT-TYPE

The value of svcL2RteVsiPrefix is the low-order 4 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.

OBJECT-TYPE

The value of svcL2RteRouteDistinguisher is the high-order 6 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.

OBJECT-TYPE

The value of svcL2RteNextHopType indicates the address type of svcL2RteNextHop.

OBJECT-TYPE

The value of svcL2RteNextHop indicates the IP next hop for this L2 route. This value is equivalent to the IP address of the Far End of this L2 route.

OBJECT-TYPE

The value of svcL2RteSdpBindId indicates the SDP bind ID of the SDP bind that binds this VPLS context to the VSI indicated by svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop. The value of svcL2RteSdpBindId will be '0000000000000000'H if there was an error in creating the L2 route and the svcL2RteError will contain a string describing the error.

OBJECT-TYPE

The value of svcL2RtePwTemplateId indicates the PW template associated with the SDP bind that binds this VPLS context to the VSI indicated by svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop.

OBJECT-TYPE

The value of svcL2RteError indicates an error message describing an error encountered when establishing this L2 route entry. The value of svcL2RteError will be a zero-length string when the L2 route is successfully established.

OBJECT-TYPE

The value of svcL2RteLastErrorTime indicates the sysUpTime at the time of the last error for this L2 route entry. If no errors were encountered for this entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of svcL2RteStatus indicates the status of the this L2 Route.

OBJECT-TYPE

svcL2BgpVplsRteTable contains entries for L2 routes.

OBJECT-TYPE

An L2 route entry in the svcL2BgpVplsRteTable.

OBJECT-TYPE

The value of svcL2BgpVplsRteVeId is the low-order 4 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.

OBJECT-TYPE

The value of svcL2BgpVplsRteRD is the high-order 6 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.

OBJECT-TYPE

The value of svcL2BgpVplsRteNextHopType indicates the address type of svcL2BgpVplsRteNextHop.

OBJECT-TYPE

The value of svcL2BgpVplsRteNextHop indicates the IP next hop for this L2 route. This value is equivalent to the IP address of the Far End of this L2 route.

OBJECT-TYPE

The value of svcL2BgpVplsRteSdpBindId indicates the SDP bind ID of the SDP bind that binds this VPLS context to the VSI indicated by svcL2BgpVplsRteRD, svcL2BgpVplsRteVeId, and svcL2BgpVplsRteNextHop. The value of svcL2BgpVplsRteSdpBindId will be '0000000000000000'H if there was an error in creating the L2 route and the svcL2BgpVplsRteError will contain a string describing the error.

OBJECT-TYPE

The value of svcL2BgpVplsRtePwTemplateId indicates the PW template associated with the SDP bind that binds this VPLS context to the VSI indicated by svcL2BgpVplsRteRD, svcL2BgpVplsRteVeId, and svcL2BgpVplsRteNextHop.

OBJECT-TYPE

The value of svcL2BgpVplsRteError indicates an error message describing an error encountered when establishing this L2 route entry. The value of svcL2BgpVplsRteError will be a zero-length string when the L2 route is successfully established.

OBJECT-TYPE

The value of svcL2BgpVplsRteLastErrorTime indicates the sysUpTime at the time of the last error for this L2 route entry. If no errors were encountered for this entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of svcL2BgpVplsRteControlWord indicates the control word advertised for this route.

OBJECT-TYPE

The value of svcL2BgpVplsRtePathMtu indicates the layer-2 path MTU for the pseudo-wire to the PE for this route.

OBJECT-TYPE

The value of svcL2BgpVplsRteState indicates state of the object for this route.

OBJECT-TYPE

The value of svcL2BgpVplsRteSeqDelivery indicates the sequenced delivery flag advertised for this route.

OBJECT-TYPE

The value of svcL2BgpVplsRteDF indicates the value of DF bit associated with this BGP VPLS L2 route entry.

OBJECT-TYPE

The value of svcL2BgpVplsRteStatus indicates the status of the this BGP VPLS L2 Route.

OBJECT-TYPE

The value of svcVllBgpADPWTempBindTblLC indicates the sysUpTime at the time of the last modification of svcVllBgpADPWTempBindTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

svcVllBgpADPWTempBindTable contains entries for the associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VLL service.

OBJECT-TYPE

A SDP Auto-Bind Policy entry in the svcVllBgpADPWTempBindTable.

OBJECT-TYPE

The value of svcVllBgpADPWTempBindRowStatus is used for the creation and deletion of associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VLL service.

OBJECT-TYPE

The value of svcVllBgpADPWTempBindLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of the svcVllBgpADPWTempBindEndPt specifies the endpoint associated with this pseudo-wire template binding.

OBJECT-TYPE

The value of the svcVllBgpADPWTempBindBfdTemplate specifies the BFD template name associated with this pseudo-wire template binding.

OBJECT-TYPE

The value of svcVllBgpADPWTempBindBfdEnable specifies whether BFD is enabled on this pseudo-wire template binding.

OBJECT-TYPE

The value of svcVllBgpADPWTempBindBfdEncap specifies the BFD encapsulation used on this pseudo-wire template binding.

OBJECT-TYPE

The value of svcVllBgpADPWTempBindRTTblLC indicates the sysUpTime at the time of the last modification of svcVllBgpADPWTempBindRTTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

svcVllBgpADPWTempBindTable contains entries for Route Targets associated with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VLL service.

OBJECT-TYPE

A SDP Auto-Bind Policy Route Target entry in the svcVllBgpADPWTempBindRTTable.

OBJECT-TYPE

The value of svcVllBgpADPWTempBindRT is the Route Target associated with a PW template and a BGP Auto-Discovery context for a VLL service. When advertisements are received with this Route Target, the PW template specified by the index, pwTemplateId, will be used to create the SDP.

OBJECT-TYPE

The value of svcVllBgpADPWTempBindRTRowStat is used for the association of Route Targets with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VLL service.

OBJECT-TYPE

The svcL2BgpVpwsRteTable contains entries for BGP VPWS (Virtual Private Wire Service) L2 routes.

OBJECT-TYPE

The svcL2BgpVpwsRteEntry is an BGP VPWS L2 route entry in the svcL2BgpVpwsRteTable.

OBJECT-TYPE

The value of svcL2BgpVpwsRteVeId is the low-order 4 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.

OBJECT-TYPE

The value of svcL2BgpVpwsRteRD is the high-order 6 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.

OBJECT-TYPE

The value of svcL2BgpVpwsRteNextHopType indicates the address type of svcL2BgpVpwsRteNextHop.

OBJECT-TYPE

The value of svcL2BgpVpwsRteNextHop indicates the IP next hop for this L2 route. This value is equivalent to the IP address of the Far End of this L2 route.

OBJECT-TYPE

The value of svcL2BgpVpwsRteSdpBindId indicates the SDP bind ID of the SDP bind that binds this VPWS context to the VSI indicated by svcL2BgpVpwsRteRD, svcL2BgpVpwsRteVeId, and svcL2BgpVpwsRteNextHop. The value of svcL2BgpVpwsRteSdpBindId will be '0000000000000000'H if there was an error in creating the L2 route and the svcL2BgpVpwsRteError will contain a string describing the error.

OBJECT-TYPE

The value of svcL2BgpVpwsRtePwTemplateId indicates the PW template associated with the SDP bind that binds this VPWS context to the VSI indicated by svcL2BgpVpwsRteRD, svcL2BgpVpwsRteVeId, and svcL2BgpVpwsRteNextHop.

OBJECT-TYPE

The value of svcL2BgpVpwsRteError indicates an error message describing an error encountered when establishing this L2 route entry. The value of svcL2BgpVpwsRteError will be a zero-length string when the L2 route is successfully established.

OBJECT-TYPE

The value of svcL2BgpVpwsRteLastErrorTime indicates the sysUpTime at the time of the last error for this L2 route entry. If no errors were encountered for this entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of svcL2BgpVpwsRteControlWord indicates the control word advertised for this route.

OBJECT-TYPE

The value of svcL2BgpVpwsRtePathMtu indicates the layer-2 path MTU for the pseudo-wire to the PE for this route.

OBJECT-TYPE

The value of svcL2BgpVpwsRteState indicates state of the object for this route.

OBJECT-TYPE

The value of svcL2BgpVpwsRteSeqDelivery indicates the sequenced delivery flag advertised for this route.

OBJECT-TYPE

The value of svcL2BgpVpwsRteStatus indicates the status of the this BGP VPWS L2 Route.

OBJECT-TYPE

The value of svcL2BgpVpwsRteCsv indicates the circuit status vector for this route.

OBJECT-TYPE

The value of svcL2BgpVpwsRteTxStatus indicates the transmit side status of the this BGP VPWS L2 Route.

OBJECT-TYPE

The value of svcL2BgpVpwsRtePreference indicates the preference value for this route.

OBJECT-IDENTITY

OBJECT-TYPE

The current number of SDPs configured in this device.

OBJECT-TYPE

The next available value for sdpId.

OBJECT-TYPE

A table that contains SDP information.

OBJECT-TYPE

Information about a specific SDP.

OBJECT-TYPE

SDP identifier.

OBJECT-TYPE

This object specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, the corresponding SDP must be administratively down, not bound to any service, and not in use as a mirror destination.

OBJECT-TYPE

This object specifies the type of delivery used by this SDP. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.

OBJECT-TYPE

This object specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. If sdpTunnelFarEndIpAddress is not set, then sdpFarEndIpAddress also specifies the remote end of the TLDP session. The value of this object must be set to a non-default value when the sdpDelivery is set to 'gre' or 'mpls' for the row to become 'active', and can only be changed while the admin status of the SDP is 'down'. The sdpFarEndIpAddress is obsoleted and replaced with sdpFarEndInetAddressType and sdpFarEndInetAddress objects.

OBJECT-TYPE

When the SDP delivery specified by sdpDelivery is 'mpls', this object specifies the list of LSPs used to reach the far-end ESR device. All the LSPs in this list must terminate at the IP address specified by sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls'). This object is otherwise insignificant and should contain a value of 0. When this list has more than one element, the Nokia SROS router will use all of the LSPs for load balancing purposes. Each LSP ID in the list corresponds to the vRtrMplsLspIndex of the given MPLS LSP.

OBJECT-TYPE

Generic information about this SDP.

OBJECT-TYPE

This object specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on this SDP. When the value of this object is 'none' then the labels are manually assigned at the time the SDP is bound to a service. The value of this object can only be changed while the admin status of the SDP is 'down'. An 'inconsistentValue' error is returned if this object is not set to 'none' when sdpDelivery is set to 'mpls'. An 'inconsistentValue' error is returned if this object is not set to 'none' when sdpDelivery is set to 'l2tpv3'. Default value of this object is set to 'none' when sdpDelivery is set to 'l2tpv3' otherwise default value for this object is set to 'tldp'.

OBJECT-TYPE

The desired state of this SDP.

OBJECT-TYPE

The operating state of this SDP. The value 'notAlive' is valid only when keep-alive is enabled, and it means that the keep-alive operating status is not alive. The value 'notReady' is valid only when this SDP uses a label signaling protocol (e.g. TLDP) and it means that the signaling session with the far-end peer has not been established. The value 'invalidEgressInterface' indicates that the IOMs have detected that the egress interface towards the far-end device is not a network port.

OBJECT-TYPE

This object specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. The default value of zero indicates that the path MTU should be computed dynamically from the corresponding MTU of the tunnel.

OBJECT-TYPE

This object indicates the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. In order to be able to bind this SDP to a given service, the value of this object minus the control word size (if applicable) must be equal to or larger than the MTU of the service, as defined by its svcMtu.

OBJECT-TYPE

This object is used to enable or disable the keep-alive protocol used to determine the operating status of this SDP.

OBJECT-TYPE

The current status of the keep-alive protocol. The value 'alive' indicates that the far-end ESR is replying the SDP Echo Requests messages sent by this device indicating no error condition. The value 'noResponse' indicates that the number of consecutive SDP Echo Request messages unacknowledged by the far-end ESR exceeded the limit defined by sdpKeepAliveMaxDropCount. The values 'senderIdInvalid' and 'responderIdError' are two error conditions detected by the far-end ESR. The value 'disabled' indicates that the keep-alive protocol is not enabled.

OBJECT-TYPE

This object specifies how often the SDP Echo Request messages are transmitted on this SDP.

OBJECT-TYPE

This object specifies the maximum number of consecutive SDP Echo Request messages that can be unacknowledged before the keep-alive protocol reports a fault.

OBJECT-TYPE

This object specifies the amount of time to wait before the keep-alive operating status is eligible to enter the 'alive' state.

OBJECT-TYPE

The value of sysUpTime at the time of the most recent management-initiated change to this SDP.

OBJECT-TYPE

This object specifies the length of the SDP Echo Request messages transmitted on this SDP. The default value of zero indicates that the message length should be equal to the SDP's operating path MTU, as specified by sdpOperPathMtu. When the default value is overridden, the message length is sdpKeepAliveHelloMessageLength.

OBJECT-TYPE

The number of SDP Echo Request messages transmitted since the keep-alive was administratively enabled or the counter was cleared.

OBJECT-TYPE

The number of SDP Echo Response messages received since the keep-alive was administratively enabled or the counter was cleared.

OBJECT-TYPE

The number of SDP Echo Response messages received after the corresponding Request timeout timer expired.

OBJECT-TYPE

The number of seconds to wait for an SDP Echo Response message before declaring a timeout.

OBJECT-TYPE

When the value of this object is 'true' the transport LSPs are signalled by LDP, as opposed to being provisioned static or RSVP-signalled LSPs. This object applies only to MPLS SDPs.

OBJECT-TYPE

This object specifies the Ethertype used in frames sent out this SDP, when the VC type is vlan.

OBJECT-TYPE

When the value of this object is 'true' the advertised MTU of a VLL spoke SDP bind includes the 14-byte L2 header, so that it is backward compatible with pre-2.0 software.

OBJECT-TYPE

This object indicates all the conditions that affect the operating status of this SDP.

OBJECT-TYPE

The value of sysUpTime at the time of the most recent operating status change to this SDP.

OBJECT-TYPE

The value of sdpMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this SDP. This object is only valid if sdpMvplsMgmtService is different from 0.

OBJECT-TYPE

The value of sdpMvplsMgmtSdpBndId indicates which SDP bind in the mVPLS instance specified in sdpMvplsMgmtService is controlling this SDP. This object is only valid if sdpMvplsMgmtService is different from 0.

OBJECT-TYPE

The value of the object sdpCollectAcctStats specifies whether the agent collects accounting statistics for this SDP. When the value is 'true' the agent collects accounting statistics on this SDP.

OBJECT-TYPE

The value of sdpAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP. The value zero indicates that the agent should use the default accounting policy, if one exists.

OBJECT-TYPE

The value of sdpClassFwdingEnabled specifies the admin state of class-based forwarding on this SDP. When the value is 'true', class-based forwarding is enabled.

OBJECT-TYPE

The value of sdpClassFwdingDefaultLsp specifies the LSP ID that is used as a default when class-based forwarding is enabled on this SDP. This object must be set when enabling class-based forwarding.

OBJECT-TYPE

The value of sdpClassFwdingMcLsp specifies the LSP ID that all multicast traffic will be forwarded on when class-based forwarding is enabled on this SDP. When this object has its default value, multicast traffic will be forwarded on an LSP according to its forwarding class mapping.

OBJECT-TYPE

The value of sdpMetric specifies the metric to be used within the Tunnel Table Manager for decision making purposes. When multiple SDPs going to the same destination exist, this value is used as a tiebreaker by Tunnel Table Manager users like MP-BGP to select route with lower value.

OBJECT-TYPE

The value of sdpAutoSdp indicates whether this is an Auto generated SDP from RADIUS discovery or BGP auto-discovery.

OBJECT-TYPE

The value of sdpSnmpAllowed indicates if SNMP sets are allowed on this SDP.

OBJECT-TYPE

This object specifies the Ethertype used in frames sent out on this SDP when sdpBindVcType is 'vlan' for Provider Backbone Bridging frames.

OBJECT-TYPE

sdpBandwidthBookingFactor is used to calculate the max SDP available bandwidth. The value of sdpBandwidthBookingFactor specifies the percentage of the SDP max available bandwidth for VLL call admission. When the value of sdpBandwidthBookingFactor is set to zero (0), no new VLL spoke-sdp bindings with non-zero bandwidth are permitted with this SDP. Overbooking, >100% is allowed.

OBJECT-TYPE

The value of sdpOperBandwidth indicates the operational Bandwidth in kilobits per seconds (Kbps) available for this SDP. The value sdpOperBandwidth is determined by the sum of the bandwidth of all the RSVP LSPs used by the SDP.

OBJECT-TYPE

The value of sdpAvailableBandwidth indicates the Bandwidth that is still free for booking by the SDP bindings on the SDP.

OBJECT-TYPE

The value of sdpMaxBookableBandwidth indicates the max Bandwidth that the SDP has for booking by the SDP bindings. The value of sdpMaxBookableBandwidth is calculated as follow: sdpMaxBookableBandwidth = sdpOperBandwidth * sdpBandwidthBookingFactor

OBJECT-TYPE

The value of sdpBookedBandwidth indicates the SDP Bandwidth that has been booked by the SDP bindings.

OBJECT-TYPE

The value of sdpCreationOrigin indicates the protocol or mechanism which created this SDP.

OBJECT-TYPE

The value of sdpEnforceDiffServLspFc specifies whether service manager must validate with RSVP the support of the FC by the LSP. By default, the SDP uses the direct configuration without validation with RSVP.

OBJECT-TYPE

The value of sdpMixedLspModeEnabled specifies whether mixed mode LSPs is enabled on this SDP. Setting the value to 'true' allows LDP to be enabled and LSPs to be configured at the same time on this SDP.

OBJECT-TYPE

The value of sdpLspRevertTime specifies the time to wait before reverting back from LDP to the configured LSPs, after having failed over to LDP. When the value is -1, the sdp will never revert back.

OBJECT-TYPE

The value of sdpLspRevertTimeCountDown indicated the timer countdown before reverting back from LDP on this SDP. The timer countdown begins after the first configured LSP becomes active. The value of -1 indicates when the revert time countdown is not applicable.

OBJECT-TYPE

The value of sdpLdpLspId indicates the Id for the LDP LSP if sdpLdpEnabled is set to 'true' and there is a valid LDP route to the sdpFarEndIpAddress or sdpFarEndNodeId.

OBJECT-TYPE

The value of sdpLdpActive indicates whether LDP is active for the current SDP.

OBJECT-TYPE

The value of sdpNetDomainName specifies the network-domain name this SDP is associated with. The network-domain defines the list of network interfaces this SDP can send traffic on. The default value of this object is the 'default' network-domain.

OBJECT-TYPE

The value of sdpEgressIfsNetDomainConsistent indicates whether all the egress network interfaces that can carry traffic on this SDP are associated with the network-domain configured on this SDP. A value of 'notApplicable' indicates that there is no egress network interface that can carry traffic on this SDP. A value of 'consistent' indicates that the network-domains for all the egress network interfaces that can carry traffic on this SDP are consistent. A value of 'inconsistent' indicates that the network-domain for one or more egress network interfaces that can carry traffic on this SDP are inconsistent.

OBJECT-TYPE

The value of sdpBgpTunnelEnabled specifies whether the transport tunnel is BGP as opposed to LDP or RSVP signalled LSPs. This value cannot be set to 'true' if sdpLdpEnabled is 'true' or if there is at least one RSVP or static LSP provisioned. This object applies to MPLS SDPs.

OBJECT-TYPE

The value of sdpBgpTunnelLspId indicates the Id for the BGP Tunnel LSP if sdpBgpTunnelEnabled is set to 'true' and there is a valid LDP route to the sdpFarEndIpAddress.

OBJECT-TYPE

The value of sdpTunnelFarEndIpAddress specifies the IP address of the remote end of the transport tunnel for this SDP. The value can only be changed while the admin status of the SDP is 'down'. The sdpTunnelFarEndIpAddress is obsoleted and replaced with sdpTunnelFarEndInetAddressType and sdpTunnelFarEndInetAddress objects.

OBJECT-TYPE

The value of sdpActiveLspType indicates the type of LSP that is currently active on this SDP. For sdpDelivery 'gre', the value is always 'not-applicable'. For sdpDelivery 'mpls', the values can be 'rsvp', 'ldp', 'mplsTp', 'srIsis', 'srOspf', 'srTeLsp', 'fpe', 'bgp' or 'none'.

OBJECT-TYPE

The value of sdpBindingPort specifies the port id for the binding on this SDP. The value of sdpPwPortOperStatus will be set to 'down' of all the related SDP pseudo-wire ports, if the SDP resolves to another port than the one specified here. An 'inconsistentValue' error is returned when this object is set to a non-default value when sdpDelivery is set to 'gre'.

OBJECT-TYPE

The value of sdpFarEndNodeId specifies the node identifier of the far-end for this sdp. The value of this object must be set to a non-default value when the sdpDelivery is set to 'mpls' for the row to become 'active', and can only be changed while the admin status of the SDP is 'down'.

OBJECT-TYPE

The value of sdpFarEndGlobalId specifies the global identifier of the far-end for this sdp.

OBJECT-TYPE

The value of the object sdpFarEndInetAddressType specifies the address type of sdpFarEndInetAddress.

OBJECT-TYPE

The value of sdpFarEndInetAddress object specifies the IP address of the remote end of the tunnel defined by this SDP.

OBJECT-TYPE

The value of the object sdpLocalEndInetAddressType specifies the address type of sdpLocalEndInetAddress.

OBJECT-TYPE

The value of sdpLocalEndInetAddress object specifies the IP address of the local end of the tunnel defined by this SDP. An 'inconsistentValue' error is returned when sdpLocalEndInetAddress is set to non-default and sdpDelivery is not set to 'l2tpv3'.

OBJECT-TYPE

The value of sdpSourceBMacLSB specifies the 16 least significant bits (lsb) which when combined with the 32 most significant bits of the PBB source-bmac specified by svcPbbSrcBVplsMacAddr, forms the virtual backbone MAC associated with this SDP. The virtual backbone MAC is used as the source backbone MAC for traffic received on a PBB EPIPE spoke-SDP with the value of sdpBindUseSdpBMac set to 'true (1)' (i.e. redundant pseudo-wire) and forwarded into the B-VPLS domain. An 'inconsistentValue' error is returned if the value of sdpSourceBMacLSB is set to non-default value when the value of sdpControlPWVCId is set to default value.

OBJECT-TYPE

The value of sdpControlPWVCId specifies the spoke-SDP VC identifier to be used as a control pseudo-wire to determine whether Shortest Path Bridging Module (SPBM) advertises the virtual backbone MAC. An 'inconsistentValue' error is returned if the value of sdpControlPWVCId is set to non-default value when the value of sdpSourceBMacLSB is set to default value.

OBJECT-TYPE

The value of sdpControlPWIsActive indicates whether control pseudo-wire is considered active on the Backbone Edge Bridge (BEB).

OBJECT-TYPE

The value of sdpTunnelFarEndInetAddressType specifies the address type of sdpTunnelFarEndInetAddress.

OBJECT-TYPE

The value of sdpTunnelFarEndInetAddress specifies the IP address of the remote end of the transport tunnel for this SDP. This address must be different from sdpFarEndInetAddress. The value can only be changed while the admin status of the SDP is 'down'.

OBJECT-TYPE

The value of sdpGreAllowFragmentation specifies whether to allow GRE encapsulated packets to be sent without setting the DF bit for this SDP. This object is valid only when sdpDelivery is set to 'gre'.

OBJECT-TYPE

The value of sdpFpeLspId indicates the identifier for the forward-path-extension LSP when the SDP is created using 'fpe'.

OBJECT-TYPE

The value of sdpWeightedEcmpEnabled specifies the packets forwarded to a set of ECMP tunnel next-hops which will be sprayed proportionally to the load balancing weights configured for each LSP.

OBJECT-TYPE

The value of sdpOperTunnelFarEndInetAddrType indicates the address type of sdpOperTunnelFarEndInetAddr.

OBJECT-TYPE

The value of sdpOperTunnelFarEndInetAddr indicates the operational IP address of the remote end of the transport tunnel for this SDP. If sdpTunnelFarEndInetAddress is not set, it will take the value from sdpFarEndInetAddress.

OBJECT-TYPE

A table that contains SDP binding information.

OBJECT-TYPE

Information about a specific SDP binding.

OBJECT-TYPE

SDP Binding identifier.

OBJECT-TYPE

This object specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.

OBJECT-TYPE

The static MPLS VC label used by the far-end device to send packets to this device in this service via this SDP. Normal range of (2048..18431) is used unless changed by the user.

OBJECT-TYPE

The static MPLS VC label used by this device to send packets to the far-end device in this service via this SDP.

OBJECT-TYPE

The MPLS label used by the far-end device to send packets to this device in this service via this SDP. This label is either sdpBindAdminIngressLabel, if not null, or the one obtained via the SDP's signaling protocol.

OBJECT-TYPE

The MPLS label used by this device to send packets to the far-end device in this service via this SDP. This label is either sdpBindAdminEgressLabel, if not null, or the one obtained via the SDP's signaling protocol.

OBJECT-TYPE

The desired state of this Service-SDP binding.

OBJECT-TYPE

The value of sdpBindOperStatus indicates the operating status of this Service-SDP binding. 'up' The Service-SDP binding is operational. 'noEgressLabel' The ingress label is available but the egress one is missing. 'noIngressLabel' The egress label is available but the ingress one is not. 'noLabels' Both the ingress and the egress labels are missing. 'down' The binding is administratively down. 'svcMtuMismatch' Both labels are available, but a service MTU mismatch was detected between the local and the far-end devices. 'sdpPathMtuTooSmall' The operating path MTU of the corresponding SDP minus the size of the SDP Bind control word (if applicable) is smaller than the service MTU. 'sdpNotReady' The SDP's signaling session is down. 'sdpDown' The SDP is not operationally up. 'sapDown' The SAP associated with the service is down.

OBJECT-TYPE

The value of sysUpTime at the time of the most recent management-initiated change to this Service-SDP binding.

OBJECT-TYPE

This object specifies whether this Service SDP binding is a spoke or a mesh. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.

OBJECT-TYPE

The row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified.

OBJECT-TYPE

The row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified.

OBJECT-TYPE

The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified.

OBJECT-TYPE

The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified.

OBJECT-TYPE

The VPN ID of the associated service.

OBJECT-TYPE

The Customer ID of the associated service.

OBJECT-TYPE

The value of sdpBindVcType is an enumerated integer that specifies the type of virtual circuit (VC) associated with the SDP binding. The value 'vpls' is no longer supported.

OBJECT-TYPE

OBJECT-TYPE

This value of the object sdpBindSplitHorizonGrp specifies the name of the split-horizon group where the spoke SDP Bind belongs to. This object can be set only at the time the row is created and is mutually exclusive with sdpBindMulticastSource. Per default a spoke SDP Bind does not belong to any split-horizon group. The name specified must correspond to an existing split-horizon group in the TLS service where this spoke SDP Bind is defined.

OBJECT-TYPE

This object indicates all the conditions that affect the operating status of this SDP Bind. The bit values are as follows: sdpBindAdminDown (0) - SDP Bind is admin down. svcAdminDown (1) - Service is admin down. stitchingSvcTxDown (2) - PW-PORT FPE stitching svc transmit is down. sdpOperDown (3) - SDP is oper down. sdpPathMtuTooSmall (4) - SDP's path MTU minus SDP Bind control word size is less than Service MTU. noIngressVcLabel (5) - No ingress VC label. noEgressVcLabel (6) - No egress VC label. svcMtuMismatch (7) - Service MTU mismatch with the remote PE. vcTypeMismatch (8) - VC type mismatch with the remote PE. relearnLimitExceeded (9) - MAC relearn limit was exceeded (TLS only). iesIfAdminDown (10) - IP interface is admin down (IES and VPRN only). releasedIngressVcLabel (11) - Peer released our ingress VC label. labelsExhausted (12) - Label Manager has ran out of labels. svcParamMismatch (13) - Service-specific parameter mismatch. insufficientBandwidth (14) - Insufficient bandwidth to allocate to SDP binding. pwPeerFaultStatusBits (15) - Received PW fault status bits from peer. meshSdpDown (16) - Mesh SDP Down. notManagedByMcRing (17) - Not managed by mc-ring. outOfResource (18) - Such as memory. mhStandby (19) - Standby due to BGP. multi-home protocol. oamDownMepFault (20) - ETH-CFM down MEP fault detected. oamUpMepFault (21) - ETH-CFM up MEP fault detected. standbySigSlaveTxDown (22) - Transmit is down for standby-sig-spoke. operGrpDown (23) - Operational group is down. withdrawnIngressVcLabel(24) - Withdrawn due to incompatibility. vplsPmsiDown (25) - provider-tunnel down. recProtSrcMac (26) - Received a packet with a protected source MAC. peerFaultStatusTxDown (27) - Transmit is down because block-on-peer-fault is enabled and received PW faults status from peer. evpnRouteConflict (28) - EVPN has route to. adminLocked (29) - SDP Bind is admin-locked. evpnP2mpConfict (30) - Conflict with evpn p2mp. labelStackLimitExceeded(31) - label stack overhead exceeding the egress IOM limitation.

OBJECT-TYPE

The value of the object sdpBindLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to this SDP Bind.

OBJECT-TYPE

When this SDP Bind is defined on an IES service and the value of sdpBindType is 'spoke', this object specifies the index of the associated IES interface. The value of this object can be set only when the row is created and cannot be changed while the row status is 'active'. This object is otherwise not significant and should have the value zero.

OBJECT-TYPE

The value of the object sdpBindMacPinning specifies whether or not MAC address pinning is active on this SDP bind (mesh or spoke). Setting the value to enable disables relearning of MAC addresses on other SAPs or SDPs within the same VPLS; the MAC address will hence remain attached to the SDP Bind for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP. The value will be set by default to disabled. However for a spoke SDP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator. This object applies to spoke-SDP associated with the service with svcType set to 'tls'.

OBJECT-TYPE

The value of the object sdpBindIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified.

OBJECT-TYPE

The value of the object sdpBindEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified.

OBJECT-TYPE

The value of the object sdpBindCollectAcctStats specifies whether the agent collects accounting statistics for this SDP bind. When the value is 'true' the agent collects accounting statistics on this SDP bind.

OBJECT-TYPE

The value of sdpBindAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP bind. The value zero indicates that the agent should use the default accounting policy, if one exists.

OBJECT-TYPE

sdpBindPwPeerStatusBits indicates the bits set by the LDP peer when there is a fault on its side of the pseudowire. LAC failures occur on the SAP that has been configured on the PIPE service, PSN bits are set by SDP-binding failures on the PIPE service. The pwNotForwarding bit is set when none of the above failures apply, such as an MTU mismatch failure. This value is only applicable if the peer is using the pseudowire status signalling method to indicate faults.

OBJECT-TYPE

sdpBindPeerVccvCvBits indicates the CV type bits set by the LDP peer if it supports VCCV (Virtual Circuit Connection Verification) on a pseudowire. If the peer does not send VCCV information, or does not support it, the bits will be set to 0.

OBJECT-TYPE

sdpBindPeerVccvCcBits indicates the CC type bits set by the LDP peer if it supports VCCV (Virtual Circuit Connection Verification) on a pseudowire. If the peer does not send VCCV information, or does not support it, the bits will all be 0.

OBJECT-TYPE

sdpBindControlWordBit specifies whether the use of the 'ControlWord' is preferred or not. The value of sdpBindControlWordBit is exchanged with LDP peer during pseudowire negotiation time. The default value is determined by sdpBindVcType. sdpBindVcType of atmSdu and frDlci must have default value of 'true'. Other values of sdpBindVcType must have default value of 'false'.

OBJECT-TYPE

sdpBindOperControlWord indicates whether the 'ControlWord' is used or not. The value of sdpBindOperControlWord is negotiated with the LDP peer. When both the local and the peer prefer the use of the 'ControlWord', sdpBindOperControlWord has the value of 'true'.

OBJECT-TYPE

sdpBindEndPoint specifies the service endpoint to which this SDP bind is attached. The svcId of the SDP bind MUST match the svcId of the service endpoint.

OBJECT-TYPE

sdpBindEndPointPrecedence specifies the precedence of this SDP bind when there are multiple SDP binds attached to one service endpoint. The value 0 can only be assigned to one SDP bind, making it the primary SDP bind. When an SDP bind goes down, the next highest precedence SDP bind begins forwarding traffic.

OBJECT-TYPE

sdpBindIsICB specifies whether this sdpBind is an inter-chassis backup SDP bind.

OBJECT-TYPE

The value of the object sdpBindPwFaultInetAddressType indicates the address type of sdpBindPwFaultInetAddress.

OBJECT-TYPE

The value of sdpBindPwFaultInetAddress indicates the IP address that was included in the pseudowire status message sent by the LDP peer. This value is only applicable if the peer is using the pseudowire status signalling method to indicate faults.

OBJECT-TYPE

The value of sdpBindClassFwdingOperState indicates the operational state of forwarding class based forwarding on this sdpBind. When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'false', the value of sdpBindClassFwdingOperState is 'outOfService'. When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'true' and the svcType of the service this sdpBind is defined on is 'tls', 'vprn', or 'ies', the value of sdpBindClassFwdingOperState is 'inService'. If the service has svcVcSwitching set to 'true', the value of sdpBindClassFwdingOperState is 'inService' When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'true' and the svcType of the service this sdpBind is defined on is 'epipe', 'apipe', 'fpipe', or 'ipipe' with no SAP defined on the service, the value of sdpBindClassFwdingOperState is 'unknown'. If the service has a SAP with a NULL sapIngressSharedQueuePolicy, the value of sdpBindClassFwdingOperState is 'outOfService'. If the service has a SAP with a non-NULL sapIngressSharedQueuePolicy, the value of sdpBindClassFwdingOperState is 'inService'.

OBJECT-TYPE

The value of sdpBindForceVlanVcForwarding specifies whether or not vc-vlan-type forwarding is forced in the datapath for the sdp which have sdpBindVcType set to 'ether'. When set to 'true' vc-vlan-type forwarding is forced. An 'inconsistentValue' error is returned when an attempt is made to set the value of sdpBindForceVlanVcForwarding to 'true' and sdpBindVcType is not set to 'ether'.

OBJECT-TYPE

The value of the object sdpBindAdminBandwidth specifies the bandwidth that needs to be reserved for this SDP binding in kilobits per second. The SdpBindBandwidth object only applies to the SDP bindings under the epipe(1), apipe(7), fpipe(8), ipipe(9) and cpipe(10) services.

OBJECT-TYPE

The value of the object sdpBindOperBandwidth indicates the bandwidth that has been reserved for this SDP binding in kilobits per second. The value 0 indicates that SDP doesn't have bandwidth to satisfy the bandwidth requirement of this SDP binding. The sdpBindOperBandwidth object only applies to the SDP bindings under the epipe(1), apipe(7), fpipe(8), ipipe(9) and cpipe(10) services.

OBJECT-TYPE

The value of sdpBindCreationOrigin indicates the protocol or mechanism which created this SDP binding.

OBJECT-TYPE

The value of sdpBindDescription specifies a user-provided description for the SDP Bind.

OBJECT-TYPE

The value of sdpBindSiteName indicates the site-name associated with this SDP Bind.

OBJECT-TYPE

The value of sdpBindHashLabel specifies whether the use of hash label is enabled or not on this SDP Bind.

OBJECT-TYPE

The value of sdpBindIsaAaApplicationProfile specifies the ISA-AA application profile for this sdp. The specified application profile needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.

OBJECT-TYPE

The value of sdpBindStandbySigSlave specifies whether transmission of the spoke will be blocked when the spoke receives standby status notification from its peer.

OBJECT-TYPE

The value of sdpBindHashLabelSignalCapability specifies whether to signal the hash label capability to the remote PE. The default value is 'false' and cannot be changed unless sdpBindHashLabel is set to 'true'.

OBJECT-TYPE

The value of sdpBindIngressFlowspec specifies whether ingress IPv4 Flowspec is enabled for this sdp.

OBJECT-TYPE

The value of sdpBindCpmProtPolicyId specifies the CPM protection policy for this SDP binding. Zero specifies that no CPM protection policy is associated with this SDP binding. A non-zero value must be the index of an active tmnxCpmProtPolTable row. If the SDP binding can support Eth-CFM MEPs or MIPs, the default CPM protection policy is 255 (which is the default CPU protection policy for a network interface). Zero is not supported in this case. If the SDP binding cannot support Eth-CFM MEPs or MIPs, the default CPM protection policy is zero. Changing the CPM protection policy value is not supported in this case.

OBJECT-TYPE

The value of sdpBindCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM protection policy (as specified by sdpBindCpmProtPolicyId) must be applied. If the value of sdpBindCpmProtMonitorMac is 'true', the per-source rate limit must be applied. If the value of sdpBindCpmProtPolicyId is zero, the value of sdpBindCpmProtMonitorMac is irrelevant and will be ignored. At most one of sdpBindCpmProtMonitorMac and the sdpBindCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)' can be enabled for this SDP binding.

OBJECT-TYPE

The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by the SDP binding. Two associated options are also specified. Five combinations of flag values are supported, as shown in the following table. Flag Value (0=Disabled, 1=Enabled) ------------------------------------- ----------------------------- 'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1 'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1 'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1 ------------------------------------- ----------------------------- Supported Combination? Y N N N Y Y Y Y If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on this SDP binding. If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on this SDP binding. Excess packets are discarded. The configured information used to perform the Eth-CFM rate limiting (e.g. the rate limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the SDP binding's sdpBindCpmProtPolicyId. At most one of the following options can be enabled on this SAP: 1. sdpBindCpmProtMonitorMac, 2. The sdpBindCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)', 3. sdpBindCpmProtMonitorIP. The flags 'ethCfmMonitorAggregate(1)' and 'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM rate limiting. Therefore, they are only significant if Eth-CFM rate limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled. If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer (i.e. on a source MAC address basis). For example, if the SDP binding's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by the SDP binding, then 100 Eth-CFM packets/sec from each peer is within the limit. If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the aggregated traffic flow. For example, if the SDP binding's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by this SDP binding, then the combined rate of the two peers cannot exceed 100 packets/sec. 'ethCfmMonitorCommittedAccessRate(2)' controls the interaction between two features: Eth-CFM rate limiting, and overall rate limiting (as configured using tmnxCpmProtPolOverallRateLimit). If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM packet is subjected to two rate limits, in the following order. a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as described above. If the packet exceeds the limit, it is discarded. Otherwise... b) The SDP binding's tmnxCpmProtPolOverallRateLimit (which is applied to Eth-CFM packets, and the other rate limited packet types) is applied. If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet is subjected to one rate limit: the applicable tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets are neither counted nor discarded when performing the tmnxCpmProtPolOverallRateLimit rate limiting.

OBJECT-TYPE

The value of sdpBindTransitIpPolicyId specifies the transit IP policy to be associated with this SDP binding. The value must either be '0' indicating an invalid transit IP policy or the specified transit IP policy needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxTransitIpPolicyTable. At most one of sdpBindTransitIpPolicyId and sdpBindTransitPrefixPolicyId can be non-zero.

OBJECT-TYPE

The value of sdpBindPwStatusSignaling specified whether this SDP binding supports pseudowire status signaling. Default value depends on the type of service: - For VPLS services it is 'true' and configurable. - For EPIPE services it is 'true' and configurable. - For all other VLL services it is 'true' but not configurable. - For Mirror services it is 'true' but not configurable. - For IES/VPRN services it is 'true' but not configurable. - For all other services it is 'false' and not configurable. An 'inconsistentValue' error is returned when an attempt is made to change this value for a SDP binding that is not configurable.

OBJECT-TYPE

The value of the sdpBindOperGrp specifies the Operational-Group identifier associated with this SDP Bind. An 'inconsistentValue' error is returned when both sdpBindOperGrp and sdpBindMonitorOperGrp are set together and at least one of them to a non-default value.

OBJECT-TYPE

The value of the sdpBindMonitorOperGrp specifies the Operational-Group identifier which will affect the state of this SDP Bind. An 'inconsistentValue' error is returned when both sdpBindOperGrp and sdpBindMonitorOperGrp are set together and at least one of them to a non-default value.

OBJECT-TYPE

The value of sdpBindOperHashLabel indicates the negotiated value of hash label that is used on this SDP binding. If the value of sdpBindHashLabel is set to 'true' but the value of sdpBindHashLabelSignalCapability is set to 'false' then sdpBindOperHashLabel will be 'true'. If the value of sdpBindHashLabelSignalCapability set to 'true' then the value of sdpBindOperHashLabel is 'true' if peer capability is 'true' and the 7xxx SR router hardware supports this capability. If the service has svcVcSwitching set to 'true', the value of sdpBindOperHashLabel will be 'true' if peer capability is 'true' and the 7xxx SR router hardware supports this capability.

OBJECT-TYPE

The value of sdpBindTransitPrefixPolicyId specifies the transit prefix policy to be associated with this SDP binding. The value must either be '0' indicating an invalid transit prefix policy or the specified transit prefix policy needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxTransPrefPolicyTable. At most one of sdpBindTransitIpPolicyId and sdpBindTransitPrefixPolicyId can be non-zero.

OBJECT-TYPE

The value of sdpBindAarpId specifies the AA Redundancy Protocol (AARP) instance associated with this SDP binding. If set to 0, no AARP instance is associated with this SDP binding.

OBJECT-TYPE

The value of the sdpBindIngressQoSNetworkPlcyId specifies the ingress QoS network policy applied to this SDP binding.

OBJECT-TYPE

The value of the sdpBindEgressQoSNetworkPlcyId specifies the egress QoS network policy applied to this SDP binding.

OBJECT-TYPE

The value of sdpBindIngressQoSFpRedirectQGrp specifies the forwarding-plane queue group Policy for this SDP binding. This object must be set along with sdpBindIngressQoSNetworkPlcyId object.

OBJECT-TYPE

The value of sdpBindEgressQoSPortRedirectQGrp specifies the forwarding-plane queue group Policy for this SDP binding. This object must be set along with sdpBindEgressQoSNetworkPlcyId object.

OBJECT-TYPE

The value of sdpBindIngressQoSInstanceId specifies the instance of the forwarding-plane ingress Queue Group for this SDP binding.

OBJECT-TYPE

The value of sdpBindEgressQoSInstanceId specifies the instance of the forwarding-plane egress Queue Group for this SDP binding.

OBJECT-TYPE

The value of sdpBindAarpServRefType specifies the role of the Spoke SDP referenced by the Redundancy Protocol (AARP) instance identified by sdpBindAarpId. If sdpBindAarpId is the invalid AARP instance '0', then the service reference type is 'none(0)'.

OBJECT-TYPE

sdpBindPwLocalStatusBits indicates the bits set locally when there is a fault. LAC failures occur on the SAP that has been configured on the PIPE service, PSN bits are set by SDP-binding failures on the PIPE service. The pwNotForwarding bit is set when none of the above failures apply, such as an MTU mismatch failure. This value is sent to the peer via pseudowire status signalling method to indicate faults only if sdpBindPwStatusSignaling is set to true.

OBJECT-TYPE

The sdpBindBlockOnPeerFault specifies whether to block the user traffic on this SDP bind when peer pw status has fault bits set.

OBJECT-TYPE

The value of sdpBindIngressIPv6Flowspec specifies whether ingress IPv6 Flowspec is enabled for this sdp.

OBJECT-TYPE

The value of sdpBindMirrorRemoteSource specifies whether this SDP bind is part of remote source of the mirror service.

OBJECT-TYPE

The value of sdpBindEtreeRootLeafTag specifies whether or not this SDP binding is etree tagging in this service. An 'inconsistentValue' error is returned if the value of this object is set to 'true' when TIMETRA-SERV-MIB::svcType for the service is not set to 'tls'. An 'inconsistentValue' error is returned if the value of this object is set to 'true' when TIMETRA-SERV-MIB::svcTlsModeEtree for the service is set to 'false'. An 'inconsistentValue' error is returned if sdpBindEtreeRootLeafTag is set to a non-default value and sdpBindEtreeLeafAc is also set to a non-default value for the same SDP instance. The value of this object can be set only during the creation of the SDP instance. An 'inconsistentValue' error is returned if sdpBindEtreeRootLeafTag is Set to a different value after the SDP instance has been created.

OBJECT-TYPE

The value of sdpBindCpmProtMonitorIP specifies whether or not to apply the tmnxCpmProtPolPerSrcRateLimit of this SDP binding's CPM Protection policy to IPv4 DHCP packets served by the SDP binding, on a per source IP address basis. For example, suppose sdpBindCpmProtMonitorIP is 'true', and this SDP binding's sdpBindCpmProtPolicyId points to a policy table row with tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two source IP addresses (e.g. 138.120.141.173 and 138.120.141.174) each send 150 DHCP packets/second to this SAP. Approx. 50 DHCP packets/second from each source will be discarded. If the value of sdpBindCpmProtPolicyId is equal to zero, the value of sdpBindCpmProtMonitorIP is irrelevant and will be ignored. At most one of the following options can be enabled on this SDP binding: 1. sdpBindCpmProtMonitorMac, 2. The sdpBindCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)', 3. sdpBindCpmProtMonitorIP.

OBJECT-TYPE

The value of sdpBindUseSdpBMac specifies whether this spoke-SDP is expected to be part of a redundant pseudo-wire within a PBB epipe service. Setting the value of sdpBindUseSdpBMac to 'true (1)' will cause traffic forwarded from this spoke-SDP into the B-VPLS domain to use a virtual backbone MAC as its source MAC address when the value of both sdpSourceBMacLSB and sdpControlPWVCId is set to non-default values.

OBJECT-TYPE

The value of sdpBindEtreeLeafAc specifies whether or not this SDP binding is an etree leaf access circuit of the service. An 'inconsistentValue' error is returned if the value of this object is set to 'true' when TIMETRA-SERV-MIB::svcType for the service is not set to 'tls'. An 'inconsistentValue' error is returned if the value of this object is set to 'true' when TIMETRA-SERV-MIB::svcTlsModeEtree for the service is set to 'false'. An 'inconsistentValue' error is returned if sdpBindEtreeLeafAc is set to a non-default value and sdpBindEtreeRootLeafTag is also set to a non-default value for the same SDP instance. The value of this object can be set only during the creation of the SDP instance. An 'inconsistentValue' error is returned if sdpBindEtreeLeafAc is Set to a different value after the SDP instance has been created.

OBJECT-TYPE

The value of sdpBindBfdTemplateName specifies BFD template associated with this SDP binding.

OBJECT-TYPE

The value of sdpBindBfdEnable specifies whether BFD is enabled on this SDP binding.

OBJECT-TYPE

The value of sdpBindBfdEncap specifies the BFD encapsulation used on this SDP binding.

OBJECT-TYPE

The value of sdpBindForceQinqVcForwarding specifies whether or not the datapath should forcefully insert two VLAN tags when sdpBindVcType is either set to 'ether' or 'vlan'. An 'inconsistentValue' error is returned when an attempt is made to set the value of sdpBindForceQinqVcForwarding to 'true' and sdpBindVcType is not set to either 'ether' or 'vlan'.

OBJECT-TYPE

The value of sdpBindIngressVlanTranslation specifies the desired Ingress Vlan Translation. A value of 'vlanId' specifies that the value of sdpBindIngressVlanTranslationId is to be used to overwrite the preserved VLAN id in the packet. A value of 'copyOuter' specifies that the outer VLAN id should be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sdpBindIngressVlanTranslation to 'vlanId' and sdpBindIngressVlanTranslationId is set to '-1'.

OBJECT-TYPE

The value of sdpBindIngressVlanTranslationId specifies the VLAN id to be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sdpBindIngressVlanTranslationId to other than '-1' and sdpBindIngressVlanTranslation is not set to 'vlanId'.

OBJECT-TYPE

The value of sdpBindMinReqdSdpOperMtu indicates the minimum required SDP MTU size used with this SDP binding.

OBJECT-TYPE

The value of sdpBindForceQinqVcFwding specifies whether or not the datapath should forcefully insert two VLAN tags which are copied from the qinq service-delimiting vlan values. The sdpBindVcType should be either set to 'ether' or 'vlan'.

OBJECT-TYPE

The value of sdpBindMulticastSource specifies whether or not the multicast source is enabled on the SDP. This object can only be set at the time the row is created and is mutually exclusive with sdpBindSplitHorizonGrp.

OBJECT-TYPE

A table that contains basic SDP Binding statistics.

OBJECT-TYPE

Basic statistics about a specific SDP Binding.

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

The Customer ID of the associated service.

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

A table that contains TLS spoke SDP Bind information.

OBJECT-TYPE

TLS specific information about an SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsStpAdminStatus specifies whether this SDP Bind participates in the TLS's Spanning Tree Protocol.

OBJECT-TYPE

The value of the object sdpBindTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SDP Bind. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.

OBJECT-TYPE

The value of the object sdpBindTlsStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this SDP Bind. Values in the range 2048..4094 are automatically assigned by the agent when the SDP Bind is created or when the value of this object is set to zero via management. Values in the range 1..2047 can be set via management, to allow this object to have a deterministic value across system reboots.

OBJECT-TYPE

The value of the object sdpBindTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port.

OBJECT-TYPE

The value of the object sdpBindTlsStpRapidStart specifies whether Rapid Start is enabled on this SDP Bind. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SDP Bind are driven by the value of the 'HelloTime', instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state.

OBJECT-TYPE

The value of the object sdpBindTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsStpPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state. All possible states are: learning, forwarding, broken, and discarding.

OBJECT-TYPE

The value of the object sdpBindTlsStpDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.

OBJECT-TYPE

The value of the object sdpBindTlsStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment.

OBJECT-TYPE

The value of the object sdpBindTlsStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state.

OBJECT-TYPE

The value of the object sdpBindTlsStpInConfigBpdus indicates the number of Configuration BPDUs received on this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsStpInBadBpdus indicates the number of bad BPDUs received on this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsStpOutTcnBpdus indicates the number of Topology Change Notification BPDUs sent out this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsStpOperBpduEncap indicates the operating encapsulation type used on BPDUs sent out and received on this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsStpVpnId indicates the VPN ID of the associated service.

OBJECT-TYPE

The value of the object sdpBindTlsStpCustId indicates the Customer ID of the associated service.

OBJECT-TYPE

The value of the object sdpBindTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB for this SDP Bind. The value 0 means: no limit for this SDP Bind. The command is valid only for spoke SDPs. The maximum value of sdpBindTlsMacAddressLimit depends on the platform/chassis mode.

OBJECT-TYPE

The value of the object sdpBindTlsNumMacAddresses indicates the number of MAC addresses currently present in the FDB that belong to this SDP Bind (Both learned and static MAC addresses are counted).

OBJECT-TYPE

The value of the object sdpBindTlsNumStaticMacAddresses indicates the number of static MAC addresses currently present in the FDB that belong to this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindTlsMacLearning specifies whether the MAC learning process is enabled for this SDP Bind. The value is ignored if MAC learning is disabled on service level.

OBJECT-TYPE

The value of the object sdpBindTlsMacAgeing specifies whether the MAC aging process is enabled for this SDP Bind. the value is ignored if MAC aging is disabled on service level.

OBJECT-TYPE

The value of the object sdpBindTlsStpOperEdge indicates the operational value of the Edge Port parameter. The object is initialized to the value of sdpBindTlsStpRapidStart and is set FALSE on reception of a BPDU.

OBJECT-TYPE

The value of the object sdpBindTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sdp. A value of 'forceTrue' indicates that this port should always be treated as if it is connected to a point-to-point link. A value of 'forceFalse' indicates that this port should be treated as having a shared media connection.

OBJECT-TYPE

The value of the object sdpBindTlsStpPortRole indicates the current role of the sdp as defined by the Rapid Spanning Tree Protocol.

OBJECT-TYPE

The value of the object sdpBindTlsStpAutoEdge specifies whether this SDP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.

OBJECT-TYPE

The value of the object sdpBindTlsStpOperProtocol indicates whether stp, rstp or mstp is running on this spoke sdp. If the protocol is not enabled on this spoke-sdp the value notApplicable is returned.

OBJECT-TYPE

The value of the object sdpBindTlsStpInRstBpdus indicates the number of Rapid Spanning Tree (Rst) BPDUs received on this SDP.

OBJECT-TYPE

The value of the object sdpBindTlsStpOutRstBpdus indicates the number of Rapid Spanning Tree (Rstp) BPDUs sent out on this SDP.

OBJECT-TYPE

When sdpBindTlsLimitMacMove value is set to blockable (1) the agent will monitor the MAC relearn rate on this SDP Bind, and it will block it when the relearn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SDP binding will not be blocked, and another blockable SDP binding will be blocked instead.

OBJECT-TYPE

With the object sdpBindTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SDP Bind (only for spoke SDPs). When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sdpBindTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead.

OBJECT-TYPE

The value of the object sdpBindTlsMvplsPruneState indicates the mVPLS prune state of the spoke SDP. The object will be set to notApplicable if the spoke SDP is not managed by a mVPLS. If the SDP is managed the state reflects whether or not it is pruned by the STP instance running in the mVPLS instance.

OBJECT-TYPE

The value of the object sdpBindTlsMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this spoke SDP. This object is only valid if sdpBindTlsMvplsPruneState is different from notApplicable.

OBJECT-TYPE

The value of the object sdpBindTlsMvplsMgmtSdpBndId indicates the SDP bind id in the mVPLS instance specified in sdpBindTlsMvplsMgmtService that is controlling this SDP. This object is only valid if sdpBindTlsMvplsPruneState is different from notApplicable.

OBJECT-TYPE

The value of the object sdpBindTlsStpException indicates whether an STP exception condition is present on this Spoke Sdp. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link.

OBJECT-TYPE

The value of the object sdpBindTlsL2ptTermination specifies whether received L2 Protocol Tunnel PDUs are terminated on this port or sdp

OBJECT-TYPE

The value of the object sdpBindTlsBpduTranslation specifies whether received L2 Protocol Tunnel PDUs are translated before being sent out on this port or sap

OBJECT-TYPE

The value of the object sdpBindTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity.

OBJECT-TYPE

The value of the object sdpBindTlsStpInMstBpdus indicates the number of Multiple Spanning Tree (Mst) BPDUs received on this SDP.

OBJECT-TYPE

The value of the object sdpBindTlsStpOutMstBpdus indicates the number of Multiple Spanning Tree (Mst) BPDUs sent out on this SDP.

OBJECT-TYPE

The value of the object sdpBindTlsStpRxdDesigBridge indicates the designated Bridge Identifier in the last BPDU which was received on this SDP.

OBJECT-TYPE

The value of the object sdpBindTlsMacMoveNextUpTime counts down the time in seconds until a SDP bind that has been brought down due to exceeding the TLS svcTlsMacMoveMaxRate, sdpBindOperFlags 'relearnLimitExceeded', is automatically brought up again. When this value is 0xffff, the SDP bind will never be automatically brought up. When sdpBindOperStatus is 'up', this object counts down the time in seconds until the value of sdpBindTlsMacMoveRateExcdLeft is reset.

OBJECT-TYPE

The value of the object sdpBindTlsMacMoveRateExcdLeft counts down the number of times this SDP bind can exceed the TLS svcTlsMacMoveMaxRate and still be automatically brought up.

OBJECT-TYPE

The value of the object sdpBindTlsLimitMacMoveLevel specifies the hierarchy in which spoke-SDPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)

OBJECT-TYPE

The value of the object sdpBindTlsBpduTransOper indicates the operational BPDU encapsulation used for BPDU translated frames.

OBJECT-TYPE

The value of the object sdpBindTlsL2ptProtocols specifies which L2 Protocol Tunnel PDUs are terminated on this port or sdp

OBJECT-TYPE

The value of sdpBindTlsIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer which is normally ignored. When set to 'true', this bit is not considered in the internal tasks. A similar object svcEndPointIgnoreStandbySig is present at the endpoint level. If this spoke-SDP is part of that explicit endpoint, this object will be set to the value of svcEndPointIgnoreStandbySig and its value will not allowed to be changed. This spoke-SDP can be made part of an explicit endpoint only if the setting of this object is not conflicting with the setting of svcEndPointIgnoreStandbySig object.

OBJECT-TYPE

The value of sdpBindTlsBlockOnMeshFail specifies that the operational status of this spoke SDP will consider operational status of associated mesh SDPs in this service. If there are no mesh SDPs in the service, value of this object is ignored. When this object is set to 'true', then the operational status of this spoke SDP will be 'down' until the operational status of at least one mesh SDP in this service is 'up'. When set to 'false', the operational status of this spoke SDP does not consider the operational status of any mesh SDPs in the service.

OBJECT-TYPE

The value of the object sdpBindTlsInTcBitBpdus indicates the number BPDUs received on this SDP Bind with the Topology Change bit set.

OBJECT-TYPE

The value of the object sdpBindTlsOutTcBitBpdus indicates the number BPDUs sent out this SDP Bind with the Topology Change bit set.

OBJECT-TYPE

The value of the object sdpBindTlsRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of sdpBindTlsRestProtSrcMacAction is 'disable', then the SDP-BIND where the protected source MAC was seen will be brought operationally down.

OBJECT-TYPE

The value of the object sdpBindTlsRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarmOnly', the SDP-BIND will be left up and only a notification, sdpBindReceivedProtSrcMac, will be generated. When the value of this object is 'discardFrame', the SDP-BIND will start discarding the frame in addition to generating sdpBindReceivedProtSrcMac notification.

OBJECT-TYPE

The value of sdpBindTlsAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the associated SDP binding.

OBJECT-TYPE

The value of sdpBindDisableSendBvplsEvpnFlush specifies whether to send a isid based cmac flush indication when the sdp-bind goes oper-down.

OBJECT-TYPE

The value of the object sdpBindTlsRestProtSrcMacOper indicates the operational state of the Restrict Protected Source MAC feature.

OBJECT-TYPE

The value of the object sdpBindTlsRestProtSrcMacOperAct indicates the operational state of the Restrict Protected Source MAC action.

OBJECT-TYPE

A table that contains TLS Mesh SDP Bind information.

OBJECT-TYPE

TLS specific information about an Mesh SDP Bind.

OBJECT-TYPE

This object indicates the actual state of the Mesh SDP. If the sdp is operationally down, the port will be in the 'disabled' state. If the sdp is operationally up, the state will be 'forwarding' unless the hold-down timer is active in which case the state will be 'discarding'.

OBJECT-TYPE

When the hold-down timer is active, all traffic coming from this mesh sdp will be blocked. This timer will be activated for any of the following cases: 1. when a mesh SDP becomes operational; 2. when a 'disputed' BPDU is received over this mesh sdp; This is typically a symptom of one way communication (the peer at the other side of the mesh sdp does not receive our BPDUs). 3. when a MSTP BPDU from outside the region is received over this mesh SDP.

OBJECT-TYPE

This object indicates whether we already received an agreement from the peer connected via this mesh sdp. RSTP expects an agreement from every peer after sending a proposal over the VCP when it wants to transition the latter to the forwarding state. This object is only relevant when the role of the VCP is 'designated'. Not receiving an agreement is typically caused by an improperly configured sdp or by a non rstp enabled peer.

OBJECT-TYPE

This object sdpBindMeshTlsNotInMstRegion indicates whether we received a BPDU from another MST-region on this mesh SDP. If set to 'true' then the object sdpBindMeshTlsHoldDownTimer will have the value 'active'. It is up to the operator to make sure bridges connected via mesh SDPs are in the same MST-region. If not the mesh will NOT become operational.

OBJECT-TYPE

The value of the object sdpBindMeshTlsRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of sdpBindMeshTlsRestProtSrcMacAct is 'disable', then the SDP-BIND where the protected source MAC was seen will be brought operationally down.

OBJECT-TYPE

The value of the object sdpBindMeshTlsRestProtSrcMacAct indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarmOnly', the SDP-BIND will be left up and only a notification, sdpBindReceivedProtSrcMac, will be generated. When the value of this object is 'discardFrame', the SDP-BIND will start discarding the frame in addition to generating sdpBindReceivedProtSrcMac notification.

OBJECT-TYPE

The value of sdpBindMeshTlsAutoLearnMacProt specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the associated SDP binding.

OBJECT-TYPE

The value of the object sdpBindMeshTlsRPSMacOper indicates the operational state of Restrict Protected Source feature.

OBJECT-TYPE

The value of the object sdpBindMeshTlsRPSMacOperAct indicates the operational state of the Restrict Protected Source MAC action.

OBJECT-TYPE

The sdpBindApipeTable has an entry for each apipe sdpBind configured on this system.

OBJECT-TYPE

Each row entry represents a particular sdpBind related to a particular Apipe service entry. Entries are created/deleted by the user.

OBJECT-TYPE

The value of sdpBindApipeAdminConcatCellCount specifies the maximum number of ATM cells to accumulate into an MPLS packet. The remote peer will also signal the maximum number of concatenated cells it is willing to accept in an MPLS packet. When the lesser of (the configured value and the signaled value) number of cells is reached, the MPLS packet is queued for transmission onto the pseudowire.

OBJECT-TYPE

The value of sdpBindApipeSigConcatCellCount indicates the maximum number of concatenated ATM cells the remote peer is willing to accept. If there is no remote peer, or if the label mapping has not been received, this object will be zero (0).

OBJECT-TYPE

The value of sdpBindApipeOperConcatCellCount indicates the maximum number of concatenated ATM cells that will be sent on this SDP binding.

OBJECT-TYPE

The value of sdpBindApipeConcatMaxDelay object specifies the maximum amount of time to wait while performing ATM cell concatenation into an MPLS packet before transmitting the MPLS packet. This places an upper bound on the amount of delay introduced by the concatenation process. When this amount of time is reached from when the first ATM cell for this MPLS packet was received, the MPLS packet is queued for transmission onto the pseudowire.

OBJECT-TYPE

The value of sdpBindApipeConcatCellClp specifies whether a CLP change should be used as an indication to complete the cell concatenation operation. When the value is 'true', CLP is used to indicate that cell concatenation should be completed.

OBJECT-TYPE

The value of sdpBindApipeConcatCellAal5Fr specifies whether the AAL5 EOP (end of packet) should be used as an indication to complete the cell concatenation operation. When the value is 'true', EOP is used to indicate that cell concatenation should be completed.

OBJECT-TYPE

A table that contains DHCP information related to a SDP Bind. A row will exist in this table for each spoke or mesh SDP in a Tls Service. Rows are created and deleted automatically by the system.

OBJECT-TYPE

DHCP specific information about an SDP Bind.

OBJECT-TYPE

The value of the object sdpBindDhcpDescription specifies a user provided description for DHCP on this Sdp Bind.

OBJECT-TYPE

The value of the object sdpBindDhcpSnoop specifies whether or not DHCP snooping is enabled on the Sdp Bind.

OBJECT-TYPE

sdpBindDhcpStatsTable contains DHCP statistics related to a TLS SDP Bind. A row will exist in this table for each spoke or mesh SDP in a Tls Service. Rows are created and deleted automatically by the system.

OBJECT-TYPE

DHCP statistics for a TLS spoke SDP or mesh SDP.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsClntSnoopdPckts indicates the number of DHCP client packets that have been snooped on this SDP bind.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsSrvrSnoopdPckts indicates the number of DHCP server packets that have been snooped on this SDP bind.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsClntForwdPckts indicates the number of DHCP client packets that have been forwarded on this SDP bind.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsSrvrForwdPckts indicates the number of DHCP server packets that have been forwarded on this SDP bind.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsClntDropdPckts indicates the number of DHCP client packets that have been dropped on this SDP bind.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsSrvrDropdPckts indicates the number of DHCP server packets that have been dropped on this SDP bind.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsClntProxRadPckts indicates the number of DHCP client packets that have been proxied on this SDP bind based on data received from a RADIUS server.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsClntProxLSPckts indicates the number of DHCP client packets that have been proxied on this SDP bind based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsGenReleasePckts indicates the number of DHCP RELEASE messages spoofed on this SDP bind to the DHCP server.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsGenForceRenPckts indicates the number of DHCP FORCERENEW messages spoofed on this SDP bind to the DHCP clients.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsClntProxUDBPckts indicates the number of DHCP client packets that have been proxied on the local user database.

OBJECT-TYPE

The value of the object sdpBindDhcpStatsClntProxNqPckts indicates the number of DHCP client packets that have been proxied on this SDP bind based on data received from a Diameter NASREQ server.

OBJECT-TYPE

The sdpBindIpipeTable has an entry for each IPIPE sdpBind configured on this system.

OBJECT-TYPE

Each row entry represents a particular sdpBind related to a particular IPIPE service entry. Entries are created/deleted by the user.

OBJECT-TYPE

The value of the object sdpBindIpipeCeInetAddressType specifies the address type of the IP address of the CE device reachable through this IPIPE SDP binding. This object is only configurable if the value of 'svcIpipeCeAddressDiscovery' is 'disabled.

OBJECT-TYPE

The type of this address is determined by the value of the sdpBindIpipeCeInetAddressType object. This object specifies the IPv4 address of the CE device reachable through this SDP binding. This object is only configurable if the value of 'svcIpipeCeAddressDiscovery' is 'disabled.

OBJECT-TYPE

If the value of 'svcIpipeCeAddressDiscovery' is enabled, the value of the object sdpBindIpipeCeInetAddressType indicates the address type of the IP address of the CE device that is learned via LDP on this IPIPE SDP binding.

OBJECT-TYPE

If the value of 'svcIpipeCeAddressDiscovery' is enabled, the type of this address is determined by the value of the sdpBindIpipeCeInetAddressType object. This object indicates the IPv4 address of the CE device that is learned via LDP on this SDP binding.

OBJECT-TYPE

The value of sdpBindIpipePeerIpv6Capability indicates whether the far end sent us the IPv6 Stack capability TLV.

OBJECT-TYPE

If the value of svcIpipeIpv6CeAddressDiscovery is 'enabled (1)', this object indicates the discovered link local IPv6 address of the far end CE device that is learned via NS/NA messages received on this SDP binding.

OBJECT-TYPE

If the value of svcIpipeIpv6CeAddressDiscovery is 'enabled (1)', this object indicates the discovered global IPv6 address of the far end CE device that is learned via NS/NA messages received on this SDP binding.

OBJECT-TYPE

The sdpFCMappingTable has an entry for each FC mapping on an SDP configured on this system.

OBJECT-TYPE

Each row entry represents a particular FC to LSP ID mapping on an SDP. Entries are created/deleted by the user.

OBJECT-TYPE

The value of sdpFCMappingFCName specifies the forwarding class for which this mapping is defined, in the SDP indexed by 'sdpId'.

OBJECT-TYPE

The value of sdpFCMappingRowStatus is used for the creation and deletion of forwarding class to LSP mappings.

OBJECT-TYPE

The value of sdpFCMappingLspId specifies the LSP ID that traffic corresponding to the class specified in sdpFCMappingFCName will be forwarded on. This object MUST be specified at row creation time.

OBJECT-TYPE

The sdpBindTlsMfibAllowedMdaTable has an entry for each MFIB allowed MDA destination for an SDP Binding configured in the system.

OBJECT-TYPE

Each row entry represents an MFIB allowed MDA destination for an SDP Binding configured in the system. Entries can be created and deleted via SNMP SET operations on the object sdpBindTlsMfibMdaRowStatus.

OBJECT-TYPE

The value of sdpBindTlsMfibMdaRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The sdpBindCpipeTable has an entry for each cpipe sdpBind configured on this system.

OBJECT-TYPE

Each row entry represents a particular sdpBind related to a particular Cpipe service entry. Entries are created/deleted by the user.

OBJECT-TYPE

This object indicates the local payload size (in bytes).

OBJECT-TYPE

This object indicates the remote payload size (in bytes). If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be zero (0).

OBJECT-TYPE

This object indicates the local bit-rate in multiples of 64 Kbit/s.

OBJECT-TYPE

This object indicates the remote bit-rate in multiples of 64 Kbit/s. If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be zero (0).

OBJECT-TYPE

This object indicates the local CE application signalling packets mode.

OBJECT-TYPE

This object indicates the remote CE application signalling packets mode. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support signalling packets then this object will be zero (0).

OBJECT-TYPE

This object indicates the local CAS trunk framing mode.

OBJECT-TYPE

This object indicates the remote CAS trunk framing mode. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support CAS trunk framing then this object will be zero (0).

OBJECT-TYPE

This object indicates whether a RTP header is used when packets are transmitted to the remote peer, and the local peer expects a RTP header when packets are received from the remote peer.

OBJECT-TYPE

This object indicates whether a RTP header is used when packets are transmitted by the remote peer, and the remote peer expects a RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support RTP headers then this object will be 'false'.

OBJECT-TYPE

This object indicates whether differential timestamp mode is used in the RTP header when packets are transmitted to the remote peer, and the local peer expects differential timestamps in the RTP header when packets are received from the remote peer.

OBJECT-TYPE

This object indicates whether differential timestamp mode is used in the RTP header when packets are transmitted by the remote peer, and the remote peer expects differential timestamps in the RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support differential timestamp mode then this object will be 'false'.

OBJECT-TYPE

This object indicates the timestamp frequency used in the RTP header when packets are transmitted to the remote peer, and the local peer expects same timestamp frequency in the RTP header when packets are received from the remote peer. This value is in multiples of 8 KHz.

OBJECT-TYPE

This object indicates the timestamp frequency used in the RTP header when packets are transmitted by the remote peer, and the remote peer expects the same timestamp frequency in the RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support support RTP headers then this object will be zero (0). This value is in multiples of 8 KHz.

OBJECT-TYPE

A table that contains TLS spoke SDP Bind Layer 2 Protocol Tunneling Statistics. This table complements the sdpBindTlsTable. Rows in this table are created and deleted automatically by the system.

OBJECT-TYPE

TLS specific information about an SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the number of L2PT encapsulated STP config bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the number of L2PT encapsulated STP config bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the number of L2PT encapsulated STP rst bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the number of L2PT encapsulated STP rst bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the number of L2PT encapsulated STP tcn bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the number of L2PT encapsulated STP tcn bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the number of L2PT encapsulated PVST config bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the number of L2PT encapsulated PVST config bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the number of L2PT encapsulated PVST rst bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the number of L2PT encapsulated PVST rst bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the number of L2PT encapsulated PVST tcn bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the number of L2PT encapsulated PVST tcn bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsStpConfigBpdusRx indicates the number of STP config bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsStpConfigBpdusTx indicates the number of STP config bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsStpRstBpdusRx indicates the number of STP rst bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsStpRstBpdusTx indicates the number of STP rst bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsStpTcnBpdusRx indicates the number of STP tcn bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsStpTcnBpdusTx indicates the number of STP tcn bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsPvstConfigBpdusRx indicates the number of PVST config bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsPvstConfigBpdusTx indicates the number of PVST config bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsPvstRstBpdusRx indicates the number of PVST rst bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsPvstRstBpdusTx indicates the number of PVST rst bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsPvstTcnBpdusRx indicates the number of PVST tcn bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsPvstTcnBpdusTx indicates the number of PVST tcn bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsOtherBpdusRx indicates the number of other bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsOtherBpdusTx indicates the number of other bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsOtherL2ptBpdusRx indicates the number of other L2PT bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsOtherL2ptBpdusTx indicates the number of other L2PT bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsOtherInvalidBpdusRx indicates the number of other invalid bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsOtherInvalidBpdusTx indicates the number of other invalid bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the number of L2PT encapsulated CDP bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the number of L2PT encapsulated CDP bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the number of L2PT encapsulated VTP bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the number of L2PT encapsulated VTP bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the number of L2PT encapsulated DTP bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the number of L2PT encapsulated DTP bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the number of L2PT encapsulated PAGP bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the number of L2PT encapsulated PAGP bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the number of L2PT encapsulated UDLD bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the number of L2PT encapsulated UDLD bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsCdpBpdusRx indicates the number of CDP bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsCdpBpdusTx indicates the number of CDP bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsVtpBpdusRx indicates the number of VTP bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsVtpBpdusTx indicates the number of VTP bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsDtpBpdusRx indicates the number of DTP bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsDtpBpdusTx indicates the number of DTP bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsPagpBpdusRx indicates the number of PAGP bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsPagpBpdusTx indicates the number of PAGP bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsUdldBpdusRx indicates the number of UDLD bpdus received on this spoke SDP.

OBJECT-TYPE

The value of sdpBindTlsL2ptStatsUdldBpdusTx indicates the number of UDLD bpdus transmitted on this spoke SDP.

OBJECT-TYPE

The value of pwTemplateTableLastChanged indicates the sysUpTime at the time of the last modification of pwTemplateTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains entries for pseudowire (PW) templates specifying SDP auto-binding.

OBJECT-TYPE

Information about a specific PW template.

OBJECT-TYPE

The PW template identifier.

OBJECT-TYPE

The value of pwTemplateRowStatus is used for the creation and deletion of PW templates.

OBJECT-TYPE

The value of pwTemplateLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of pwTemplateUseProvisionedSdp specifies whether the to use an already provisioned SDP. A value of 'true' specifies that the tunnel manager will be consulted for an existing active SDP. Otherwise, a value of 'false' specifies that the default SDP template will be used to use for instantiation of the SDP.

OBJECT-TYPE

The value of pwTemplateVcType specifies the type of virtual circuit (VC) associated with the SDP Bind.

OBJECT-TYPE

The value of pwTemplateAccountingPolicyId specifies the policy to use to collect accounting statistics on the SDP Bind. The value zero indicates that the agent should use the default accounting policy, if one exists.

OBJECT-TYPE

The value of pwTemplateCollectAcctStats specifies whether the agent collects accounting statistics for the SDP Bind. When the value is 'true' the agent collects accounting statistics on the SDP Bind.

OBJECT-TYPE

The value of pwTemplateMacLearning specifies whether the MAC learning process is enabled for the SDP Bind. The value is ignored if MAC learning is disabled at service level.

OBJECT-TYPE

The value of pwTemplateMacAgeing specifies whether the MAC aging process is enabled for the SDP Bind. The value is ignored if MAC aging is disabled at the service level.

OBJECT-TYPE

With the object pwTemplateMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on the SDP Bind (only for spoke SDPs). When the limit is reached, packets with unknown source MAC address are forwarded by default. By setting sdpBindTlsDiscardUnknownSource to 'enabled', packets with unknown source MAC will be dropped instead.

OBJECT-TYPE

The value of pwTemplateLimitMacMove specifies the behavior for when the relearn rate specified by svcTlsMacMoveMaxRate is exceeded. When pwTemplateLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on the SDP Bind, and it will block it when the relearn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' the SDP Bind will not be blocked, and another blockable SDP Bind will be blocked instead.

OBJECT-TYPE

The value of pwTemplateMacPinning specifies whether or not MAC address pinning is active on the SDP Bind (mesh or spoke). Setting the value to 'enabled' disables relearning of MAC addresses on other SAPs or SDPs within the same VPLS; the MAC address will hence remain attached to the SDP Bind for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP. The value will be set by default to 'disabled'. However for a spoke SDP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator.

OBJECT-TYPE

The value of pwTemplateVlanVcTag specifies the VLAN VC tag for the SDP Bind.

OBJECT-TYPE

The value of pwTemplateMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB for the SDP Bind. The value 0 specifies no limit for the SDP Bind. The command is valid only for spoke SDPs. The maximum value of this object depends on the platform/chassis mode.

OBJECT-TYPE

The value of pwTemplateShgName specifies the name of the split-horizon group where the spoke SDP Bind belongs to. By default a spoke SDP Bind does not belong to any split-horizon group. The name specified must correspond to an existing split-horizon group in the TLS service where the spoke SDP Bind is defined.

OBJECT-TYPE

The value of pwTemplateShgDescription specifies a user-provided description for split-horizon group on the SDP Bind.

OBJECT-TYPE

The value of pwTemplateShgRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored.

OBJECT-TYPE

The value of pwTemplateShgRestUnprotDstMac specifies how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped.

OBJECT-TYPE

The value of pwTemplateEgressMacFilterId specifies the tMacFilterId which indexes an egress filter entry in TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no filter is specified.

OBJECT-TYPE

The value of pwTemplateEgressIpFilterId specifies the tIPFilterId which indexes an egress filter entry in TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no filter is specified.

OBJECT-TYPE

The value of pwTemplateEgressIpv6FilterId specifies the tIPv6FilterId which indexes an egress filter entry in TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no filter is specified.

OBJECT-TYPE

The value of pwTemplateIngressMacFilterId specifies the tMacFilterId which indexes an ingress filter entry in TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no filter is specified.

OBJECT-TYPE

The value of pwTemplateIngressIpFilterId specifies the tIPFilterId which indexes an ingress filter entry in TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no filter is specified.

OBJECT-TYPE

The value of pwTemplateIngressIpv6FilterId specifies the tIPv6FilterId which indexes an ingress filter entry in TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no filter is specified.

OBJECT-TYPE

The value of pwTemplateIgmpFastLeave specifies whether or not fastleave is allowed on the SDP Bind. If set to 'enabled', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout.

OBJECT-TYPE

The value of pwTemplateIgmpImportPlcy specifies a policy statement that must be applied to all incoming IGMP messages on the SDP Bind.

OBJECT-TYPE

The value of pwTemplateIgmpLastMembIntvl specifies the Max Response Time (in deciseconds) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.

OBJECT-TYPE

The value of pwTemplateIgmpMaxNbrGrps specifies how many group addresses are allowed for the SDP Bind. The value 0 means that no limit is imposed.

OBJECT-TYPE

The value of pwTemplateIgmpGenQueryIntvl specifies the interval (in seconds) between two consecutive general queries sent by the system on the SDP. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'.

OBJECT-TYPE

The value of pwTemplateIgmpQueryRespIntvl specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'.

OBJECT-TYPE

The value of pwTemplateIgmpRobustCount specifies the value of the Robust count. This object allows tuning for the expected packet loss on the SDP. If an SDP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'.

OBJECT-TYPE

The value of pwTemplateIgmpSendQueries specifies whether the system generates General Queries by itself on the SDP.

OBJECT-TYPE

The value of pwTemplateIgmpMcacPolicyName indicates the name of the multicast CAC policy.

OBJECT-TYPE

The value of pwTemplateIgmpMcacUnconstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilobits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of pwTemplateIgmpMcacUnconstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface.

OBJECT-TYPE

The value of pwTemplateIgmpMcacPrRsvMndBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilobits per second(kbps). If the value of pwTemplateIgmpMcacUnconstBW is '0', no mandatory channels are allowed. If the value of pwTemplateIgmpMcacUnconstBW is '-1', then all mandatory and optional channels are allowed. If the value of pwTemplateIgmpMcacPrRsvMndBW is equal to the value of pwTemplateIgmpMcacUnconstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of pwTemplateIgmpMcacPrRsvMndBW should always be less than or equal to that of pwTemplateIgmpMcacUnconstBW. An attempt to set the value of pwTemplateIgmpMcacPrRsvMndBW greater than that of pwTemplateIgmpMcacUnconstBW will result in 'inconsistentValue' error.

OBJECT-TYPE

The value of pwTemplateIgmpVersion specifies the version of IGMP for the PW template.

OBJECT-TYPE

The value of pwTemplateForceVlanVcForwarding specifies whether or not vc-vlan-type forwarding is forced in the datapath when pwTemplateVcType is set to 'ether'. When pwTemplateForceVlanVcForwarding is set to 'true', vc-vlan-type forwarding is forced. An 'inconsistentValue' error is returned when an attempt is made to set the value of pwTemplateForceVlanVcForwarding to 'true' and pwTemplateVcType is not set to 'ether'.

OBJECT-TYPE

The value of pwTemplateHashLabel specifies whether the use of hash label is enabled or not for the PW template.

OBJECT-TYPE

The value of pwTemplateControlWord specifies whether the use of 'ControlWord' is enabled on pseudowire packets or not. When the value of the object is set to 'true', all VPLS packets are encapsulated with the control word when sent over the pseudowire. When the value of the object is set to 'false', the use of 'ControlWord' is disabled.

OBJECT-TYPE

The value of pwTemplateHashLabelSignalCap specifies whether to signal the hash label capability to the remote PE. The default value is 'false' and cannot be changed unless pwTemplateHashLabel is set to 'true'.

OBJECT-TYPE

The value of the object pwTemplateRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of pwTemplateRestProtSrcMacAction is 'disable', then the SAP or SDP-BIND where the protected source MAC was seen will be brought operationally down.

OBJECT-TYPE

The value of the object pwTemplateRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarmOnly', the SAP or SDP-BIND which sets the restricted MAC will be left up and only a notification, sapReceivedProtSrcMac or sdpBindReceivedProtSrcMac, will be generated. When the value of this object is 'discardFrame', the SAP or SDP-BIND which sees the restricted MAC will start discarding the frame in addition to generating sapReceivedProtSrcMac or sdpBindReceivedProtSrcMac notification.

OBJECT-TYPE

The value of pwTemplateAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the SAP belonging to this template.

OBJECT-TYPE

The value of the object pwTemplateShgRestProtSrcMacAct indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP or SDP-BIND belonging to pwTemplateShgName. When the value of this object is 'disable' the SAP or SDP-BIND belonging to pwTemplateShgName will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarmOnly', the SAP belonging to pwTemplateShgName will be left up and only a notification, sapReceivedProtSrcMac or sdpBindReceivedProtSrcMac, will be generated. When the value of this object is 'discardFrame', the SAP or SDP-BIND belonging to pwTemplateShgName will start discarding the frame in addition to generating sapReceivedProtSrcMac or sdpBindReceivedProtSrcMac notification.

OBJECT-TYPE

The value of pwTemplateShgAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the SAP or SDP-BIND belonging to pwTemplateShgName.

OBJECT-TYPE

The value of the pwTemplateIngQoSNetworkPlcyId specifies the ingress QoS network policy applied to this PW template.

OBJECT-TYPE

The value of the pwTemplateEgrQoSNetworkPlcyId specifies the egress QoS network policy applied to this PW template.

OBJECT-TYPE

The value of pwTemplateIngQoSFpRedirectQGrp specifies the forwarding-plane queue group Policy for this PW template. This object must be set along with pwTemplateIngQoSNetworkPlcyId or pwTemplateIngQoSNetworkPlcyName object. An 'inconsistentValue' error is returned if pwTemplateIngQoSFpRedirectQGrp is set to a non-default value and an entry corresponding to tmnxFPNum to which this PW template belongs does not exist in tmnxFPAccIngQGrpTable.

OBJECT-TYPE

The value of pwTemplateEgrQoSPortRedirectQGrp specifies the forwarding-plane queue group Policy for this PW template. This object must be set along with pwTemplateEgrQoSNetworkPlcyId or pwTemplateEgrQoSNetworkPlcyName object. An 'inconsistentValue' error is returned if pwTemplateEgrQoSPortRedirectQGrp is set to a non-default value and an entry corresponding to tmnxFPNum to which this PW template belongs does not exist in tmnxFPAccIngQGrpTable.

OBJECT-TYPE

The value of pwTemplateIngQoSInstanceId specifies the instance of the forwarding-plane ingress Queue Group for this PW template.

OBJECT-TYPE

The value of pwTemplateEgrQoSInstanceId specifies the instance of the forwarding-plane egress Queue Group for this PW template.

OBJECT-TYPE

The value of pwTemplateBlockOnPeerFault specifies whether to block user traffic being forwarded when peer pw status bits have faults for this PW template.

OBJECT-TYPE

The value of pwTemplateForceQinqVcForwarding specifies whether or not the datapath should forcefully insert two VLAN tags when pwTemplateVcType is either set to 'ether' or 'vlan'. An 'inconsistentValue' error is returned when an attempt is made to set the value of pwTemplateForceQinqVcForwarding to 'true' and pwTemplateVcType is not set to either 'ether' or 'vlan'.

OBJECT-TYPE

The value of pwTemplatePreferProvSdp specifies whether or not to use provisioned SDP when available. An 'inconsistentValue' error is returned if pwTemplatePreferProvSdp is set to true when pwTemplateUseProvisionedSdp is set to false. An 'inconsistentValue' error is returned if pwTemplatePreferProvSdp is modified after creation of the entry.

OBJECT-TYPE

The value of pwTemplateEntropyLabel specifies whether the use of entropy label is enabled or not for the PW template.

OBJECT-TYPE

The value of pwTemplateName specifies the name to associate with this PW template.

OBJECT-TYPE

The value of pwTemplateGreDelivery specifies whether or not to use a GRE tunnel should be used when creating an auto SDP. An 'inconsistentValue' error is returned if pwTemplateGreDelivery is modified after creation of the entry.

OBJECT-TYPE

The value of the pwTemplateIngQoSNetworkPlcyName specifies the ingress QoS network policy name applied to this PW template.

OBJECT-TYPE

The value of the pwTemplateEgrQoSNetworkPlcyName specifies the egress QoS network policy name applied to this PW template.

OBJECT-TYPE

The value of pwTemplateIngressIpFilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object pwTemplateIngressIpFilterId is ignored.

OBJECT-TYPE

The value of pwTemplateIngressIpv6FilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object pwTemplateIngressIpv6FilterId is ignored.

OBJECT-TYPE

The value of pwTemplateIngressMacFilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object pwTemplateIngressMacFilterId is ignored.

OBJECT-TYPE

The value of pwTemplateEgressIpFilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object pwTemplateEgressIpFilterId is ignored.

OBJECT-TYPE

The value of pwTemplateEgressIpv6FilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object pwTemplateEgressIpv6FilterId is ignored.

OBJECT-TYPE

The value of pwTemplateEgressMacFilterName specifies the ingress Filter name. When the value of this object is set to non-default, the value of object pwTemplateEgressMacFilterId is ignored.

OBJECT-TYPE

The value of pwTemplateForceQinqVcFwding specifies whether or not the datapath should forcefully insert two VLAN tags which are copied from the qinq service-delimiting vlan values. The pwTemplateVcType should be either set to 'ether' or 'vlan'.

OBJECT-TYPE

The value of pwTemplateIgmpSnpgGrpSrcTblLC indicates the sysUpTime at the time of the last modification of pwTemplateIgmpSnpgGrpSrcTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains entries for static IGMP Snooping groups.

OBJECT-TYPE

Information about a specific static IGMP Snooping groups.

OBJECT-TYPE

The IP multicast group address type for this entry.

OBJECT-TYPE

The IP multicast group address for this entry.

OBJECT-TYPE

The source address type for this entry.

OBJECT-TYPE

The source address for this entry.

OBJECT-TYPE

The value of pwTemplateIgmpSnpgRowStatus is used for the creation and deletion of static IGMP snooping entries.

OBJECT-TYPE

The value of pwTemplateIgmpSnpgLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of pwTemplateMfibAllowedMdaTblLC indicates the sysUpTime at the time of the last modification of pwTemplateMfibAllowedMdaTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The pwTemplateMfibAllowedMdaTable has an entry for each MFIB allowed MDA destination for an PW template.

OBJECT-TYPE

Each row entry represents an MFIB allowed MDA destination for an PW template configured in the system. Entries can be created and deleted via SNMP SET operations on the object pwTemplateMfibMdaRowStatus.

OBJECT-TYPE

The value of pwTemplateMfibMdaRowStatus controls the creation and deletion of rows in this table.

OBJECT-TYPE

The value of sdpBindTlsMrpTableLastChanged indicates the sysUpTime at the time of the last modification of sdpBindTlsMrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The sdpBindTlsMrpTable allows the operator to modify attributes of the Multiple Registration Protocol (MRP) feature for the TLS SDP Bind. This table contains an entry for each TLS SDP Bind created by the user using either sdpBindTlsTable or sdpBindMeshTlsTable. Rows in this table are created and deleted automatically by the system.

OBJECT-TYPE

Each row entry contains objects that allows the modification of the Multiple Registration Protocol feature for a specific SDP-Binding in a TLS service.

OBJECT-TYPE

The value of sdpBindTlsMrpLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of sdpBindTlsMrpJoinTime specifies a timer value in 10ths of seconds which determines the maximum rate at which attribute join messages can be sent on the SDP.

OBJECT-TYPE

The value of sdpBindTlsMrpLeaveTime specifies a timer value in 10ths of seconds which determines the amount of time a registered attribute is held in leave state before the registration is removed.

OBJECT-TYPE

The value of sdpBindTlsMrpLeaveAllTime specifies a timer value in 10ths of seconds which determines the frequency where all attribute declarations on the SDP are all refreshed.

OBJECT-TYPE

The value of sdpBindTlsMrpPeriodicTime specifies a timer value in 10ths of seconds which determines the frequency of retransmission of attribute declarations.

OBJECT-TYPE

The value of sdpBindTlsMrpPeriodicEnabled specifies whether retransmission of attribute declarations is enabled.

OBJECT-TYPE

The value of sdpBindTlsMrpRxPdus indicates the number of MRP packets received on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpDroppedPdus indicates the number of dropped MRP packets on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpTxPdus indicates the number of MRP packets transmitted on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpRxNewEvent indicates the number of 'New' MRP events received on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpRxJoinInEvent indicates the number of 'Join-In' MRP events received on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpRxInEvent indicates the number of 'In' MRP events received on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpRxJoinEmptyEvent indicates the number of 'Join Empty' MRP events received on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpRxEmptyEvent indicates the number of 'Empty' MRP events received on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpRxLeaveEvent indicates the number of 'Leave' MRP events received on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpTxNewEvent indicates the number of 'New' MRP events transmitted on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpTxJoinInEvent indicates the number of 'Join-In' MRP events transmitted on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpTxInEvent indicates the number of 'In' MRP events transmitted on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpTxJoinEmptyEvent indicates the number of 'Join Empty' MRP events transmitted on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpTxEmptyEvent indicates the number of 'Empty' MRP events transmitted on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpTxLeaveEvent indicates the number of 'Leave' MRP events transmitted on this SDP Bind.

OBJECT-TYPE

The value of sdpBindTlsMrpPolicy specifies the mrp policy to control which Group BMAC attributes will advertise on the egress SDP Bind.

OBJECT-TYPE

This table contains an entry for each MAC address managed by Multiple MAC Registration Protocol (MMRP) on the SDP Bind for the TLS. Entries are dynamically created and destroyed by the system as the MAC Addresses are registered or declared in MMRP.

OBJECT-TYPE

MMRP specific information about a MAC address managed by MMRP on a SDP Bind in a TLS.

OBJECT-TYPE

The value of sdpBindTlsMmrpMacAddr indicates an ethernet MAC address which is being managed by MMRP on this SAP.

OBJECT-TYPE

The value of sdpBindTlsMmrpDeclared indicates whether the MRP applicant on this SAP is declaring this MAC address on behalf of MMRP.

OBJECT-TYPE

The value of sdpBindTlsMmrpRegistered indicates whether the MRP registrant on this SAP has notified MMRP of a registration of this MAC address.

OBJECT-TYPE

The value of sdpBindTlsMmrpEndStation indicates whether the MRP registrant on this SAP originated per end-station.

OBJECT-TYPE

The value of sdpAutoBindBgpInfoTableLC indicates the sysUpTime at the time of the last modification of sdpAutoBindBgpInfoTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The sdpAutoBindBgpInfoTable has an entry for each SDP Bind entry from sdpBindTable which was created as a result of BGP Auto-discovery.

OBJECT-TYPE

Each row entry contains BGP-related information for an SDP Bind entry created as a result of BGP Auto-discovery.

OBJECT-TYPE

The value of sdpAutoBindBgpInfoTemplateId indicates the the value of the pwTemplateId object for the PW template entry used to create this SDP Bind.

OBJECT-TYPE

The value of sdpAutoBindBgpInfoAGI indicates the Attachment Group Identifier (AGI) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind.

OBJECT-TYPE

The value of sdpAutoBindBgpInfoSAII indicates the Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind.

OBJECT-TYPE

The value of sdpAutoBindBgpInfoTAII indicates the Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind.

OBJECT-IDENTITY

OBJECT-TYPE

The value of the object svcApplyEvalPwTemplateSvcId specifies the service identifier to which this action applies.

OBJECT-TYPE

The value of the object svcApplyEvalPwTemplateId specifies the pwTemplateId to apply on the service 'svcApplyEvalPwTemplateSvcId'.

OBJECT-TYPE

The value of svcApplyEvalPwTemplateAction when set to 'doAction' triggers the action to re-evaluate pseudo-wire template policy 'svcApplyEvalPwTemplateId' on the 'svcApplyEvalPwTemplateSvcId' service. Reading this object returns the value 'notApplicable'.

OBJECT-TYPE

The value of the object svcApplyEvalPwTemplateSuccess indicates whether the action was successful. If the value of the object equals 'false', then the value of svcApplyEvalPwTemplateErrorMsg indicates the reason of the failure.

OBJECT-TYPE

The value of the object svcApplyEvalPwTemplateErrorMsg indicates the reason of failure, in case the value of the object svcApplyEvalPwTemplateSuccess is equal to 'false'. If the value of the object svcApplyEvalPwTemplateSuccess is equal to 'true', this object contains an empty string.

OBJECT-TYPE

The value of the object svcApplyEvalPwTemplateTime indicates the value of sysUpTime at the last time that the object svcApplyEvalPwTemplateSuccess was written by the system.

OBJECT-TYPE

A table that contains Provider Backbone Bridging (PBB/IEEE 802.1ah) spoke SDP Bind information.

OBJECT-TYPE

PBB I-Component instance-specific information about an SDP Bind in the B-Component instance. Entries in this table can be created or deleted via SNMP operations.

OBJECT-TYPE

The value of the object sdpBindPbbSvcIdIVpls specifies the Service identifier of the I-Component instance.

OBJECT-TYPE

The value of the object sdpBindPbbSvcIdBVpls specifies the Service identifier of the B-Component instance.

OBJECT-TYPE

The value of the object sdpBindPbbId specifies the identifier of the SDP Binding in the B-Component instance.

OBJECT-TYPE

The value of sdpBindPbbRowStatus specifies the row status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.

OBJECT-TYPE

The value of sdpBindPbbLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

OBJECT-TYPE

The value of the object sdpBindPbbIgmpSnpgMRouter specifies if a multicast router is attached behind this SDP Bind.

OBJECT-TYPE

The value of the object sdpBindPbbMldSnpgMRouter specifies if a multicast router is attached behind this SDP Bind.

OBJECT-TYPE

The value of sdpBindFPropBMacAddrTblLastChgd indicates the sysUpTime at the last modification of sdpBindFPropBMacAddrTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains a zero value.

OBJECT-TYPE

sdpBindFPropBMacAddrTable contains the optional configured backbone MAC (BMac) addresses (or MAC names) for each SDP binding. This table extends the information in sdpBindTable.

OBJECT-TYPE

sdpBindFPropBMacAddrEntry defines a row in the sdpBindFPropBMacAddrTable. Rows are created and destroyed using sdpBindFPropBMacAddrRowStatus. A prerequisite for row creation: a row with the same svcId and sdpBindId must be present in the sdpBindTable.

OBJECT-TYPE

The value of sdpBindFPropBMacAddrOrMacNameTag specifies whether sdpBindFPropBMacAddrOrMacName contains a MAC name, or a MAC address.

OBJECT-TYPE

The value of sdpBindFPropBMacAddrOrMacName specifies a MAC name or MAC address configured against a <svcId, sdpBindId> index pair. When sdpBindFPropBMacAddrOrMacNameTag is 'macName (1)', sdpBindFPropBMacAddrOrMacName must contain a MAC name which is present in the svcMacName column of the svcMacNameTable. When sdpBindFPropBMacAddrOrMacNameTag is 'macAddr (2)', sdpBindFPropBMacAddrOrMacName must contain a MAC address, encoded in network byte order and IEEE 802.3 canonical bit order as defined in IEEE Std 802-2001. All the MAC addresses configured for a particular SDP (whether configured as MAC addresses, or via MAC names) must refer to one B-VPLS on the remote system.

OBJECT-TYPE

The value of sdpBindFPropBMacAddrRowStatus specifies the status of this row.

OBJECT-TYPE

The value of sdpAutoBindBgpVplsTableLC indicates the sysUpTime at the time of the last modification of sdpAutoBindBgpVplsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The sdpAutoBindBgpVplsTable has an entry for each SDP Bind entry from sdpBindTable which was created as a result of BGP VPLS binding.

OBJECT-TYPE

Each row entry contains BGP-related information for an SDP Bind entry created as a result of BGP VPLS binding.

OBJECT-TYPE

The value of sdpAutoBindBgpVplsTemplateId indicates the the value of the pwTemplateId object for the PW template entry used to create this SDP Bind.

OBJECT-TYPE

The value of sdpAtBndBgp129Type2TableLC indicates the sysUpTime at the time of the last modification of sdpAtBndBgp129Type2Table. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The sdpAtBndBgp129Type2Table has an entry for each SDP Bind entry from sdpBindTable which was created as a result of BGP Auto-discovery with a FEC-129 Type 2.

OBJECT-TYPE

Each row entry contains BGP-related information for an SDP Bind entry created as a result of BGP Auto-discovery with a FEC-129 Type 2.

OBJECT-TYPE

The value of sdpAtBndBgp129Type2TemplateId indicates the the value of the pwTemplateId object for the PW template entry used to create this SDP Bind.

OBJECT-TYPE

The value of sdpAtBndBgp129Type2SaiiGlobalId indicates the global identifier of Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service.

OBJECT-TYPE

The value of sdpAtBndBgp129Type2SaiiPrefix indicates the prefix to the Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service.

OBJECT-TYPE

The value of sdpAtBndBgp129Type2SaiiAcId indicates the attachment circuit identifier part of Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service.

OBJECT-TYPE

The value of sdpAtBndBgp129Type2TaiiGlobalId indicates the global identifier of Taget Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service.

OBJECT-TYPE

The value of sdpAtBndBgp129Type2TaiiPrefix indicates the prefix to the Taget Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service.

OBJECT-TYPE

The value of sdpAtBndBgp129Type2TaiiAcId indicates the attachment circuit identifier part of Taget Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service.

OBJECT-TYPE

The value of sdpBindEthCfmTableLastChanged indicates the sysUpTime at the time of the last modification of the sdpBindEthCfmTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The sdpBindEthCfmEntry has an entry for each SDP Bind entry from sdpBindTable which was created on a service with ETH-CFM support.

OBJECT-TYPE

Each row entry contains BGP-related information for an SDP Bind entry created as a result of BGP Auto-discovery with a FEC-129 Type 2.

OBJECT-TYPE

The value of sdpBindEthCfmRowLastChanged indicates the sysUpTime at the time of the last modification to an object for this row. If no changes were made to the entry since the instantiation of the row, then this object contains a zero value.

OBJECT-TYPE

The value of sdpBindEthCfmVMepFilter specifies whether ETH-CFM PDUs egressing the sap or sdp-binding at the same level or lower than that of the configured service MEP (the virtual MEP) should be discarded or continue to egress. Only PDUs that were originated from the virtual MEP or from the networks side of the service will be affected, local down MEP ETH-CFM transmission are not. When set to 'true' ETH-CFM PDUs with the same or lower level as the virtual MEP will be discarded. When set to 'false', egressing ETH-CFM PDUs will pass freely as per the existing ETH-CFM configuration.

OBJECT-TYPE

The value of sdpBindEthCfmSquelchIngress specifies the ETH-CFM level or levels that are silently discarded on ingress to the SDP binding. Any received ETH-CFM PDU matching a level that has been set will be dropped without regard for any other ETH-CFM criteria. No statistical information or drop count will be available for any ETH-CFM PDU that is silently discarded by this option.

OBJECT-TYPE

The value of sdpBindEthCfmCollectLmmStats specifies whether or not to compute the Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service frame counters for the specified SDP. Note that when sdpBindEthCfmCollectLmmStats is set to 'true', all data traffic regardless of forwarding class level, both in and out of profile, will be aggregated to a single stat counter. Configuration of sdpBindEthCfmCollectLmmStats is mutually exclusive with the forwarding class level aware objects sdpBindEthCfmCollLmmFcSts and sdpBindEthCfmCollLmmFcStsInP. The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus.

OBJECT-TYPE

The value of sdpBindEthCfmCollLmmFcSts specifies which forwarding class levels have enabled the computation for Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service frame counters for the specified SDP. If the bit corresponding to a forwarding class level is set, then a unique counter will be used to track all the combined in and out of profile traffic associated with that forwarding class. Note that no sdpBindEthCfmCollLmmFcSts bits can be set if sdpBindEthCfmCollectLmmStats is set to 'true' as the two are mutually exclusive. The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus.

OBJECT-TYPE

The value of sdpBindEthCfmCollLmmFcStsInP specifies which forwarding class levels (in profile only) have enabled the computation for Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service frame counters for the specified SDP. If the bit corresponding to a forwarding class level is set, then a unique counter will be used to track only all the in profile data traffic that is associated with that forwarding class level. Note that no sdpBindEthCfmCollLmmFcStsInP bits can be set if sdpBindEthCfmCollectLmmStats is set to 'true' as the two are mutually exclusive. The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus.

OBJECT-TYPE

The value of sdpBindTlsSpbTblLastChanged indicates the sysUpTime at the time of the last modification of sdpBindTlsSpbTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains TLS SDP-Bind specific Shortest Path Bridging (SPB) information.

OBJECT-TYPE

A row entry that contains TLS SDP-Bind specific SPB information.

OBJECT-TYPE

This value of the object sdpBindTlsSpbRowStatus specifies the status of this row.

OBJECT-TYPE

The value of sdpBindTlsSpbLastChgd indicates the timestamp of last change to this row in sdpBindTlsSpbTable.

OBJECT-TYPE

The value of sdpBindTlsSpbIfIndex indicates the interface index assigned to this SDP-Bind for Shortest Path Bridging.

OBJECT-TYPE

The sdpBindTlsSpbAdminState specifies the desired administrative state for Shortest Path Bridging on this sdp-bind.

OBJECT-TYPE

The value of sdpPwPortTblLastChanged indicates the sysUpTime at the time of the last modification of sdpPwPortTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains SDP specific pseudo-wire port information.

OBJECT-TYPE

A row entry that contains port specific pseudo-wire information.

OBJECT-TYPE

This value of the object sdpPwPortId specifies the pseudo-wire port identifier associated with the SDP.

OBJECT-TYPE

This value of the object sdpPwPortRowStatus specifies the status of this row. The value of sdpPwPortVcId must be set to a non-default value when creating a row.

OBJECT-TYPE

The value of sdpPwPortLastChgd indicates the timestamp of last change to this row in sdpPwPortTable.

OBJECT-TYPE

The value of the object sdpPwPortAdminStatus specifies the administrative state of this pseudo-wire port entry.

OBJECT-TYPE

The value of sdpPwPortVcId specifies the virtual circuit identifier associated with this pseudo-wire port entry. An 'inconsistentValue' error is returned if an attempt is made to create a row entry in this table without specifying value of this object.

OBJECT-TYPE

The value of sdpPwPortEncapType specifies the encapsulation type of this pseudo-wire port entry. The sdpPwPortEncapType object is replaced with TIMETRA-PORT-MIB::tmnxPwPortEncapType object.

OBJECT-TYPE

The value of sdpPwPortOperStatus indicates the operating status of this Service-SDP binding. 'up' The Service-SDP binding is operational. 'down' The binding is administratively down.

OBJECT-TYPE

This object indicates all the conditions that affect the operating status of this pseudo-wire port: The bit values are as follows: sdpBindAdminDown (0) - SDP Bind is admin down. svcAdminDown (1) - Service is admin down. stitchingSvcTxDown (2) - PW-PORT FPE stitching svc transmit is down sdpOperDown (3) - SDP is oper down. sdpPathMtuTooSmall (4) - SDP's path MTU minus SDP Bind control word size is less than Service MTU. noIngressVcLabel (5) - No ingress VC label. noEgressVcLabel (6) - No egress VC label. svcMtuMismatch (7) - Service MTU mismatch with the remote PE. vcTypeMismatch (8) - VC type mismatch with the remote PE. relearnLimitExceeded (9) - MAC relearn limit was exceeded (TLS only). iesIfAdminDown (10) - IP interface is admin down (IES and VPRN only). releasedIngressVcLabel (11) - Peer released our ingress VC label. labelsExhausted (12) - Label Manager has ran out of labels. svcParamMismatch (13) - Service-specific parameter mismatch. insufficientBandwidth (14) - Insufficient bandwidth to allocate to SDP binding. pwPeerFaultStatusBits (15) - Received PW fault status bits from peer. meshSdpDown (16) - Mesh SDP Down. notManagedByMcRing (17) - Not managed by mc-ring. outOfResource (18) - Such as memory. mhStandby (19) - Standby due to BGP. multi-home protocol. oamDownMepFault (20) - ETH-CFM down MEP fault detected. oamUpMepFault (21) - ETH-CFM up MEP fault detected. standbySigSlaveTxDown (22) - Transmit is down for standby-sig-spoke. operGrpDown (23) - Operational group is down. withdrawnIngressVcLabel(24) - Withdrawn due to incompatibility. labelStackLimitExceeded(25) - label stack overhead exceeding the egress IOM limitation.

OBJECT-TYPE

The value of sdpPwPortVcType specifies the type of virtual circuit (VC) associated with this pseudo-wire port entry.

OBJECT-TYPE

The value of sdpPwPortVlanVcTag specifies the VLAN VC tag for this pseudo-wire port entry.

OBJECT-TYPE

The value of sdpPwPortEgrShapVPort specifies the virtual port name of the shaper on the egress side for this pseudo-wire port entry.

OBJECT-TYPE

The value of sdpPwPortEgrShapDefIntDestId specifies the default intermediate destination identifier on the egress side which will eventually map to an HSMDAv2 secondary shaper for this pseudo-wire port entry.

OBJECT-TYPE

The value of sdpPwPortEgrShapSapSecShaper specifies the SAP secondary shaper associated on the egress side for this pseudo-wire port entry.

OBJECT-TYPE

The value of the sdpPwPortMonOperGrp specifies the monitoring operational group name associated with this pseudo-wire port entry.

OBJECT-TYPE

The value of sdpPwPortIngVcLabel specifies the static MPLS VC label used by the far-end device to send packets to this SDP.

OBJECT-TYPE

The value of sdpPwPortEgrVcLabel specifies the static MPLS VC label used by this device to send packets to the far-end device in this SDP.

OBJECT-TYPE

The sdpPwPortControlWord specifies whether the use of the 'ControlWord' is preferred or not.

OBJECT-TYPE

The value of sdpGrpTblLastChanged indicates the sysUpTime at the time of the last modification of sdpGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains SDP Group information.

OBJECT-TYPE

Each row specifies information about a specific SDP Group.

OBJECT-TYPE

The value of the object sdpGrpName specifies the SDP Group identifier.

OBJECT-TYPE

This value of the object sdpGrpRowStatus specifies the status of this row.

OBJECT-TYPE

The value of sdpGrpLastChange indicates the timestamp of last change to this row in sdpGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

This value of the object sdpGrpValue specifies the value associated with this SDP group.

OBJECT-TYPE

The value of sdpSdpGrpTblLastChanged indicates the sysUpTime at the time of the last modification of sdpSdpGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains SDP group information in which SDPs participates.

OBJECT-TYPE

Each row specifies information about a specific SDP participation with a specific SDP group.

OBJECT-TYPE

This value of the object sdpSdpGrpRowStatus specifies the status of this row.

OBJECT-TYPE

The value of sdpSdpGrpLastChange indicates the timestamp of last change to this row in sdpSdpGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of pwTempIncSdpGrpTableLastChanged indicates the sysUpTime at the time of the last modification of pwTempIncSdpGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains entries for pseudowire (PW) templates specifying included SDP groups.

OBJECT-TYPE

Each entry contains specific included SDP group information for a specific pseudowire (PW) template.

OBJECT-TYPE

The value of pwTempIncSdpGrpRowStatus is used for the creation and deletion of entries in the table.

OBJECT-TYPE

The value of pwTempIncSdpGrpLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of pwTempExcSdpGrpTableLastChanged indicates the sysUpTime at the time of the last modification of pwTempExcSdpGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains entries for pseudowire (PW) templates specifying excluded SDP groups.

OBJECT-TYPE

Each entry contains specific excluded SDP group information for a specific pseudowire (PW) template.

OBJECT-TYPE

The value of pwTempExcSdpGrpRowStatus is used for the creation and deletion of entries in the table.

OBJECT-TYPE

The value of pwTempExcSdpGrpLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of sdpBindPwPathTableLastChanged indicates the sysUpTime at the time of the last modification of sdpBindPwPathTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The sdpBindPwPathTable contains Pseudo-Wire path information per SDP binding.

OBJECT-TYPE

The sdpBindPwPathEntry contains Pseudo-Wire path information for specific SDP binding.

OBJECT-TYPE

The value of sdpBindPwPathRowStatus is used for the creation and deletion of entries in the table.

OBJECT-TYPE

The value of sdpBindPwPathLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of sdpBindPwPathAgi specifies the Attachment Group Identifier (AGI) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind.

OBJECT-TYPE

The value of sdpBindPwPathSaiiGlobalId specifies the global identifier of Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this SDP binding in this service.

OBJECT-TYPE

The value of sdpBindPwPathSaiiNodeId specifies the MPLS-TP node identifier to the Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this SDP binding in this service.

OBJECT-TYPE

The value of sdpBindPwPathSaiiAcId specifies the attachment circuit identifier part of Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this SDP binding in this service.

OBJECT-TYPE

The value of sdpBindPwPathTaiiGlobalId specifies the global identifier of Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this SDP binding in this service.

OBJECT-TYPE

The value of sdpBindPwPathTaiiNodeId specifies the MPLS-TP node identifier to the Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this SDP binding in this service.

OBJECT-TYPE

The value of sdpBindPwPathTaiiAcId specifies the attachment circuit identifier part of Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this SDP binding in this service.

OBJECT-TYPE

The value of sdpBindCtrlChanPwTableLastChgd indicates the sysUpTime at the time of the last modification of sdpBindCtrlChanPwTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The sdpBindCtrlChanPwTable contains control channel Pseudo-Wire information per SDP binding.

OBJECT-TYPE

The sdpBindCtrlChanPwEntry contains control channel Pseudo-Wire information for specific SDP binding.

OBJECT-TYPE

The value of sdpBindCtrlChanPwLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

The value of sdpBindCtrlChanPwStatus specifies the status of control channel for the pseudo-wire path for this SDP binding.

OBJECT-TYPE

The value of sdpBindCtrlChanPwRefreshTimer specifies the refresh timer value to be used when control channel for the pseudo-wire path is enabled for this SDP binding. An 'inconsistentValue' error is returned if the value of sdpBindCtrlChanPwRequestTimer is set to non-zero when sdpBindCtrlChanPwRefreshTimer is set to non-zero.

OBJECT-TYPE

The value of sdpBindCtrlChanPwPeerExpired indicates whether sdpBindCtrlChanPwStatus was not received after 3.5 times of sdpBindCtrlChanPwRefreshTimer value for the pseudo-wire path for this SDP binding.

OBJECT-TYPE

The value of sdpBindCtrlChanPwRequestTimer specifies the request timer value to be used when control channel for the pseudo-wire path is enabled for this SDP binding. An 'inconsistentValue' error is returned if the value of sdpBindCtrlChanPwRequestTimer is set to non-zero when sdpBindCtrlChanPwRefreshTimer is set to non-zero. An 'inconsistentValue' error is returned if the value of sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is also set to zero.

OBJECT-TYPE

The value of sdpBindCtrlChanPwRetryTimer specifies the retry timer value to be used for the request timer when control channel for the pseudo-wire path is enabled for this SDP binding. An 'inconsistentValue' error is returned if the value of sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is also set to zero.

OBJECT-TYPE

The value of sdpBindCtrlChanPwTimeoutMult specifies the timeout multiplier value to be used for the retry timer to resend the request when control channel for the pseudo-wire path is enabled for this SDP binding. An 'inconsistentValue' error is returned if the value of sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is also set to zero.

OBJECT-TYPE

The value of sdpBindCtrlChanPwAck specifies whether acknowledgement is enabled to respond to control channel status messages sent by the peer and processed on receipt from peer for this SDP binding.

OBJECT-TYPE

The sdpAutoBindBgpVpwsTable has an entry for each SDP Bind entry from sdpBindTable which was created as a result of BGP VPWS binding.

OBJECT-TYPE

Each row entry contains BGP-related information for an SDP Bind entry created as a result of BGP VPWS binding.

OBJECT-TYPE

The value of sdpAutoBindBgpVpwsTemplateId indicates the the value of the pwTemplateId object for the PW template entry used to create this SDP Bind.

OBJECT-TYPE

The sdpBindL2tpv3Table has an entry for each SDP Bind entry from sdpBindTable when sdpDelivery of the SDP is set to 'l2tpv3'.

OBJECT-TYPE

Each row entry contains L2TP v3 information for an SDP Bind entry created when sdpDelivery of the SDP is set to 'l2tpv3'.

OBJECT-TYPE

The value of sdpBindL2tpv3IngressCookie specifies the value of cookie to match on the L2TP-V3 tunnel on the ingress side of this sdp-bind.

OBJECT-TYPE

The value of sdpBindL2tpv3EgressCookie specifies the value of L2TP-V3 tunnel cookie that will be sent on the egress side of this sdp-bind.

OBJECT-TYPE

The value of sdpBindL2tpv3SessMismatch indicates whether a session mismatch occurred on the L2TP-V3 tunnel on this sdp-bind because of one or more of the following reasons (since last time this was cleared): - sdpBindL2tpv3IngressCookie mismatch, - sdpLocalEndInetAddress mismatch, - sdpFarEndInetAddress mismatch, - invalid session identifier.

OBJECT-TYPE

The value of sdpBindL2tpv3SessMismatchLstClrd indicates the time when session mismatch on the L2TP-V3 tunnel on this sdp-bind was last cleared.

OBJECT-TYPE

The value of sdpBindL2tpv3IngressCookie2 specifies the value of second cookie to match on the L2TP-V3 tunnel on the ingress side of this sdp-bind.

OBJECT-TYPE

This table maintains the ISID range information for SDP BINDs.

OBJECT-TYPE

This entry maintains the static range information for a specific SDP-BIND in a specific VPLS service.

OBJECT-TYPE

The value of sdpBindTlsStaticIsidRngId specifies the range identifier for the ISID policy.

OBJECT-TYPE

The value of sdpBindTlsStaticIsidRngRowStatus is used for the creation and deletion of rows in this table.

OBJECT-TYPE

The value of sdpBindTlsStaticIsidRngLastChgd indicates the timestamp of last change to this row in sdpBindTlsStaticIsidRngTable.

OBJECT-TYPE

The value of sdpBindTlsStaticIsidRngLow specifies the low value of the range for this entry.

OBJECT-TYPE

The value of sdpBindTlsStaticIsidRngHigh specifies the high value of the range for this entry.

OBJECT-TYPE

A table that contains DHCP6 information related to a SDP Bind. A row will exist in this table for each spoke SDP in a TLS Service. Rows are created and deleted automatically by the system.

OBJECT-TYPE

DHCP6 specific information about an SDP Bind.

OBJECT-TYPE

The value of the object sdpBindDhcp6Description specifies a user provided description for DHCP6 on this Sdp Bind.

OBJECT-TYPE

The value of the object sdpBindDhcp6Snoop specifies whether or not DHCP6 snooping is enabled on the Sdp Bind.

OBJECT-TYPE

This table maintains the information for each static ISID for SDP-BINDs.

OBJECT-TYPE

This entry maintains the information for a specific ISID associated with the specific SDP-BIND in a specific VPLS service. Entries are created and deleted by the system.

OBJECT-TYPE

The value of sdpBindTlsStaticIsid indicates ISID of this entry.

OBJECT-TYPE

The value of sdpBindTlsStaticIsidStatus indicates the MFIB status of this ISID.

OBJECT-TYPE

The table sdpBindEthLoopbackTable provides operators with the ability to provide loopback functions on a specific SDP binding in order to test Ethernet Virtual Circuits (EVC).

OBJECT-TYPE

Each entry represents an active SDP binding loopback. The SDP binding is placed in loopback by row creation and is removed by row destruction. Rows in table sdpBindEthLoopbackTable are created and destroyed by SNMP set operations on the object sdpBindEthLoopbackRowStatus. Rows in table sdpBindEthLoopbackTable may be destroyed by the system when the associated SDP binding has been deleted. A maximum of 64 rows may be created. Rows are kept in volatile storage and lost upon a system reboot.

OBJECT-TYPE

The value of the object sdpBindEthLoopbackRowStatus specifies the row status. It allows entries to be created and deleted in sdpBindEthLoopbackTable. Rows are created by specifying the value 'createAndGo(4)' and deleted by specifying the value 'destroy(6)'. If the associated SDP is deleted, the sdpBindEthLoopbackEntry row will be deleted by the system. Row creation will fail if the service identifier and the SDP binding do not exist in MIB table sdpBindTable with a TIMETRA-SERV-MIB::svcType of 'epipe(1)' or 'tls(3)', which encompasses EPIPE, PBB (Provider Backbone Bridging) EPIPE, VPLS (Virtual Private LAN Service), and I-VPLS services.

OBJECT-TYPE

The value of the object sdpBindEthLoopbackMode specifies how traffic will be reflected. If the value is set to 'ingress(1)', traffic arriving at the SDP binding ingress will be reflected back out the same SDP binding. If the value is set to 'egress(2)', traffic arriving at the SDP binding egress will be reflected back into the service in the direction of the original source.

OBJECT-TYPE

The value of the object sdpBindEthLoopbackMacSwap specifies the enabling or disabling of source address and destination address swapping for the reflected packets when the arriving packet is unicast. With sdpBindEthLoopbackMacSwap enabled, any broadcast or multicast packets arriving on a looped point will be dropped.

OBJECT-TYPE

The value of the object sdpBindEthLoopbackMacSwapAddr specifies the source MAC address used in the reflected packet when the arriving packet is broadcast or multicast. This does not apply to arriving unicast packets.

OBJECT-TYPE

The value of the object sdpBindEthLoopbackMacSwapAddrAll specifies whether or not to use the configured sdpBindEthLoopbackMacSwapAddr as the source address for all reflected parameters.

OBJECT-TYPE

This table maintains the count of MAC address entries per FDB type for the SDPs in VPLS services.

OBJECT-TYPE

This entry maintains the count of MAC address entries per FDB type for the SDP in a VPLS service.

OBJECT-TYPE

The value of sdpBindTlsFdbMacStatsNumEntries indicates the number of MAC address entries of the FDB type in the SDP in this service.

OBJECT-TYPE

The table sdpBindPwLoopbackTable provides operators with the ability to provide loopback functions on a specific SDP binding in order to test pseudo-wire Virtual Circuits (EVC).

OBJECT-TYPE

Each entry represents an active SDP binding loopback. The SDP binding is placed in loopback by row creation and is removed by row destruction. Rows in table sdpBindPwLoopbackTable are created and destroyed by SNMP set operations on the object sdpBindPwLoopbackRowStatus. Rows in table sdpBindPwLoopbackTable may be destroyed by the system when the associated SDP binding has been deleted. A maximum of 64 rows may be created. Rows are kept in volatile storage and lost upon a system reboot.

OBJECT-TYPE

The value of the object sdpBindPwLoopbackRowStatus specifies the row status. It allows entries to be created and deleted in sdpBindPwLoopbackTable. Rows are created by specifying the value 'createAndGo(4)' and deleted by specifying the value 'destroy(6)'. If the associated SDP is deleted, the sdpBindPwLoopbackEntry row will be deleted by the system. Row creation will fail if the service identifier and the SDP binding do not exist in MIB table sdpBindTable with a TIMETRA-SERV-MIB::svcType of 'apipe', 'cpipe', 'epipe' or 'tls'.

OBJECT-TYPE

The table sdpBindPwAdminLockTable provides operators with the ability to provide administrative lock functions on a specific SDP binding in order to test pseudo-wire Virtual Circuits.

OBJECT-TYPE

Each entry represents an active SDP binding adminstrative lock operation. The SDP binding is placed in adminstrative lock by row creation and is removed by row destruction. Rows in table sdpBindPwAdminLockTable are created and destroyed by SNMP set operations on the object sdpBindPwAdminLockRowStatus. Rows in table sdpBindPwAdminLockTable may be destroyed by the system when the associated SDP binding has been deleted. A maximum of 64 rows may be created. Rows are kept in volatile storage and lost upon a system reboot.

OBJECT-TYPE

The value of the object sdpBindPwAdminLockRowStatus specifies the row status. It allows entries to be created and deleted in sdpBindPwAdminLockTable. Rows are created by specifying the value 'createAndGo(4)' and deleted by specifying the value 'destroy(6)'. If the associated SDP is deleted, the sdpBindPwAdminLockEntry row will be deleted by the system. Row creation will fail if the service identifier and the SDP binding do not exist in MIB table sdpBindTable with a TIMETRA-SERV-MIB::svcType of 'apipe', 'cpipe', 'epipe' or 'tls'.

OBJECT-TYPE

The value of the sdpBindPwAdminLockTestSvc specifies the test service identifier associated with this administrative lock operation. An 'inconsistentValue' error is returned if this object is set to a different value at any time after the row is already created.

OBJECT-TYPE

The value of pwTemplateAugTableLastChgd indicates the sysUpTime at the time of the last modification of pwTemplateAugTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains entries for pseudowire (PW) templates specifying additional SDP auto-binding information.

OBJECT-TYPE

This pwTemplateAugEntry contains additional information about a specific PW template.

OBJECT-TYPE

The value of pwTemplateAugLastChgd indicates the timestamp of last change to this row in pwTemplateAugTable.

OBJECT-TYPE

The value of the pwTemplateAugStpAutoEdge specifies whether this pseudo-wire template is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.

OBJECT-TYPE

The value of the pwTemplateAugStpRapidStart specifies whether Rapid Start is enabled on this pseudo-wire template. When the value is 'enabled' the Spanning Tree Protocol state transitions on this pseudo-wire template are driven by the value of the 'HelloTime', instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state.

OBJECT-TYPE

The value of the pwTemplateAugStpAdminPtToPt specifies the administrative point-to-point status of the LAN segment attached to this sdp. A value of 'forceTrue' indicates that this port should always be treated as if it is connected to a point-to-point link. A value of 'forceFalse' indicates that this port should be treated as having a shared media connection.

OBJECT-TYPE

The value of the pwTemplateAugStpPathCost specifies the contribution of this pseudo-wire template to the path cost of paths towards the spanning tree root which include this pseudo-wire template.

OBJECT-TYPE

The value of the object pwTemplateAugStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this pseudo-wire template . As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.

OBJECT-TYPE

The value of the object pwTemplateAugStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity.

OBJECT-TYPE

The value of the object pwTemplateAugStpAdminStatus specifies whether this pseudo-wire template participates in the Spanning Tree Protocol.

OBJECT-TYPE

The value of the pwTemplateAugL2ptTermination specifies whether received L2 Protocol Tunnel packets are terminated on this pseudo-wire template.

OBJECT-TYPE

The value of the pwTemplateAugL2ptProtocols specifies which L2 Protocol Tunnel PDUs are terminated on this pseudo-wire template.

OBJECT-TYPE

The value of pwTemplateAugGreAllowFrag specifies whether to allow GRE encapsulated packets to be sent without setting the DF bit. This object is valid only when pwTemplateGreDelivery is set to 'true'.

OBJECT-TYPE

The pwTemplateAugAluNgeKeyGroupIn specifies keygroup identifier for the inbound direction.

OBJECT-TYPE

The pwTemplateAugAluNgeKeyGroupOut specifies keygroup identifier for the outbound direction.

OBJECT-TYPE

The value of sdpSegRouteTableLastChgd indicates the sysUpTime at the time of the last modification of sdpSegRouteTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains SDP segment routing information.

OBJECT-TYPE

Information about a specific SDP segment routing.

OBJECT-TYPE

The value of the sdpSegRouteIsIs specifies whether Segment Routing is enabled for IS-IS on this SDP.

OBJECT-TYPE

The value of the sdpSegRouteIsIsOperInstId indicates the IS-IS instance identifier in use for this SDP. Value of '-1' indicates no valid value for the instance identifier.

OBJECT-TYPE

The value of sdpSegRouteIsIsLspId indicates the Id for the segment routed IS-IS LSP if sdpSegRouteIsIs is set to 'enabled' and there is a valid route to the sdpFarEndIpAddress.

OBJECT-TYPE

The value of the sdpSegRouteOspf specifies whether Segment Routing is enabled for OSPF on this SDP.

OBJECT-TYPE

The value of the sdpSegRouteOspfOperInstId indicates the OSPF instance identifier in use for this SDP. Value of '-1' indicates no valid value for the instance identifier.

OBJECT-TYPE

The value of sdpSegRouteOspfLspId indicates the Id for the segment routed OSPF LSP if sdpSegRouteOspf is set to 'enabled' and there is a valid route to the sdpFarEndIpAddress.

OBJECT-TYPE

The value of the sdpSegRouteTeOperInstId indicates the traffic engineering (TE) instance identifier in use for this SDP. Value of '-1' indicates no valid value for the instance identifier.

OBJECT-TYPE

The sdpEvpnMHEthSegTable contains entries for ethernet segment information associated with a SDP binding.

OBJECT-TYPE

An ethernet segment entry in the sdpEvpnMHEthSegTable.

OBJECT-TYPE

The value of sdpEvpnMHEthSegName indicates the ethernet segment name associated with the given SDP binding.

OBJECT-TYPE

The value of sdpEvpnMHEthSegStatus indicates the status of the ethernet segment associated with the given SDP binding.

OBJECT-TYPE

The value of sdpBindExtTableLastChanged indicates the sysUpTime at the time of the last modification of sdpBindExtTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that extends sdpBindTable.

OBJECT-TYPE

sdpBindExtEntry extends sdpBindEntry.

OBJECT-TYPE

The value of sdpBindExtEntropyLabel specifies whether the use of entropy label is enabled or not on this SDP Bind.

OBJECT-TYPE

The value of sysUpTime at the time of the most recent management-initiated change to this Service-SDP binding.

OBJECT-TYPE

The value of sdpSegRouteTeLspTableLastChgd indicates the sysUpTime at the time of the last modification of sdpSegRouteTeLspTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains SDP segment routing traffic engineering (SR-TE) LSPs used to reach the far-end ESR device. All the LSPs in this list must terminate at the IP address specified by sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls'). This object is otherwise insignificant and should contain a value of 0. When this list has more than one element, the Nokia SROS router will use ALL of the LSPs for load balancing purposes. Each LSP ID in the list corresponds to the vRtrMplsLspIndex of the given MPLS LSP.

OBJECT-TYPE

Information about a specific SDP segment routing traffic engineering (SR-TE) LSP.

OBJECT-TYPE

The value of the sdpSegRouteTeLspId specifies LSP identifier associated with the 'Segment Routing Traffic Engineering' SDP which is used to reach the far-end ESR device. This LSP must terminate at the IP address specified by sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls').

OBJECT-TYPE

The value of the sdpSegRouteTeLspRowStatus specifies the row status of the entry.

OBJECT-TYPE

The value of sysUpTime at the time of the most recent change to this entry.

OBJECT-TYPE

The value of sdpMplsLspTableLastChgd indicates the sysUpTime at the time of the last modification of sdpMplsLspTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

OBJECT-TYPE

A table that contains SDP MPLS LSPs used to reach the far-end ESR device. All the LSPs in this list must terminate at the IP address specified by sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls'). This object is otherwise insignificant and should contain a value of 0. When this list has more than one element, the Nokia SROS router will use ALL of the LSPs for load balancing purposes. Each LSP ID in the list corresponds to the vRtrMplsLspIndex of the given MPLS LSP.

OBJECT-TYPE

Information about a specific SDP MPLS LSP.

OBJECT-TYPE

The value of the sdpMplsLspId specifies LSP identifier associated with the MPLS SDP which is used to reach the far-end ESR device. This LSP must terminate at the IP address specified by sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls').

OBJECT-TYPE

The value of the sdpMplsLspRowStatus specifies the row status of the entry.

OBJECT-TYPE

The value of sysUpTime at the time of the most recent change to this entry.

OBJECT-IDENTITY

OBJECT-TYPE

The ID of the SDP where SDP Bindings are associated. This object is used by the sdpBindSdpStateChangeProcessed notification to indicate the SDP that changed state and that resulted in having the associated sdpBindStatusChanged events suppressed for all SDP Bindings on that SDP.

OBJECT-TYPE

The value of dynamicSdpStatus indicates the status of the dynamic SDP which is used by the dynamicSdpConfigChanged and dynamicSdpBindConfigChanged notifications to indicate what state the dynamic SDP or SDP Bind has entered: 'created', 'modified', or 'deleted'.

OBJECT-TYPE

The value of dynamicSdpOrigin indicates the origin of the dynamic SDP. The origin indicates the protocol or mechanism that created the dynamic SDP.

OBJECT-TYPE

The value of the object dynamicSdpCreationError indicates the reason why the system was unable to create the dynamic SDP.

OBJECT-TYPE

The value of the object dynamicSdpBindCreationError indicates the reason why the system was unable to create the dynamic SDP Binding.

OBJECT-TYPE

The value of the object sdpBindNotifyMacAddr indicates the MAC address associated with a VPLS SDP Binding.

OBJECT-TYPE

The value of the object sdpEgIfNetDomainInconsCount indicates the number of SDPs which have an inconsistent network-domain for the SDP and egress network interfaces of the SDP.

OBJECT-TYPE

The value of the object sdpMSPwPeId specifies the multi-segment pseudo-wire provider-edge identifier for the service associated with this notification.

OBJECT-TYPE

The value of sdpBindIpipeCeIpAddrType indicates the type of CE address on an IPIPE SDP. The CE IP address is specified by sdpBindIpipeCeIpAddress.

OBJECT-TYPE

The value of sdpBindIpipeCeIpAddress indicates the CE IP address of type sdpBindIpipeCeIpAddrType on an IPIPE SDP.

OBJECT-TYPE

The value of sdpPbbActvPwWithNonActvCtrlPw indicates that the first pseudo-wire (PW) with sdpBindUseSdpBMac set to 'true' becomes active on the Backbone Edge Bridge (BEB) where the control PW is standby or down on that SDP. Value of 'false' for sdpPbbActvPwWithNonActvCtrlPw indicates that the last PW with sdpBindUseSdpBMac set to 'true' becomes standby or down on the BEB where control PW is standby or down on that SDP.

OBJECT-IDENTITY

OBJECT-IDENTITY