CISCO-QOS-PIB-MIB
- Registered at
- 1.3.6.1.4.1.9.18.2.1
- Last updated
- 2007-08-29 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2007-08-29 00:00, 2004-05-03 00:00, 2003-02-21 00:00, 2002-05-02 00:00, 2000-06-16 00:00, 2000-05-11 00:00
- Namespace
- cisco
- Source file
CISCO-QOS-PIB-MIB- Digest
sha256:49e83769e025d4e3dcbeae2d9e80814815beed1de5df432ce636096278c171dd
Description
The Cisco QOS Policy PIB for provisioning QOS policy.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wbu@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoPibToMib |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue |
Imported by
20 module(s) in this corpus import this one.
- CISCO-CAT6K-CROSSBAR-MIB
- CISCO-CATOS-ACL-QOS-MIB
- CISCO-DSP-MGMT-MIB
- CISCO-FLASH-MIB
- CISCO-IGMP-SNOOPING-MIB
- CISCO-L2-TUNNEL-CONFIG-MIB
- CISCO-LWAPP-MOBILITY-EXT-MIB
- CISCO-MAC-NOTIFICATION-MIB
- CISCO-MEMORY-POOL-MIB
- CISCO-NMS-APPL-HEALTH-MIB
- CISCO-PORT-QOS-MIB
- CISCO-PPPOE-MIB
- CISCO-QOS-POLICY-CONFIG-MIB
- CISCO-RMON-CONFIG-MIB
- CISCO-RTTMON-MIB
- CISCO-SWITCH-HARDWARE-CAPACITY-MIB
- CISCO-SWITCH-NETFLOW-CAPABILITY
- CISCO-SWITCH-NETFLOW-MIB
- CISCO-SWITCH-QOS-MIB
- CISCO-TELEPRESENCE-CALL-MIB
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-QOS-PIB-MIB CISCO-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Dscp TEXTUAL-CONVENTION An integer that is in the range of the DiffServ codepoint values. | current | |||
| Percent TEXTUAL-CONVENTION An integer that is in the range of a percent value. | current | |||
| PolicyInstanceId TEXTUAL-CONVENTION A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. | current | |||
| QosInterfaceQueueType TEXTUAL-CONVENTION An enumerated type for all the known interface types. The interface types are currently limited to a predefined combination of queues and thresholds such that the product of queues and thresholds does not exceed 64 (i.e., the total number of DSCPs. | current | |||
| QosInterfaceTypeCapabilities TEXTUAL-CONVENTION An enumeration of interface capabilities. Used by the PDP to select policies and configuration to push to the PEP. | current | |||
| QosLayer2Cos TEXTUAL-CONVENTION An integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values. | current | |||
| QueueRange TEXTUAL-CONVENTION An integer that is limited to the number of queues per interface supported by the PIB. Limited to 64 which is the number of codepoints. | current | |||
| RoleCombination TEXTUAL-CONVENTION A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. | current | |||
| ThresholdSetRange TEXTUAL-CONVENTION An integer that is limited to the number of threshold sets per queue supported by the PIB. A threshold set is a collection of parameters describing queue threshold. The parameters of a threshold set depend on the drop mechanism the queue implements. For example, the threshold set for tail-drop comprises a single parameter, the percentage of queue size at which dropping occurs. The threshold set for WRED comprises two parameters; within the range of the two parameters packets are randomly dropped. | current | |||
| Unsigned64 TEXTUAL-CONVENTION An unsigned 64 bit integer. We use SYNTAX Counter64 for the enconding rules. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| qosPIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.1 | |||
| qosPIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.1.1 | |||
| qosPIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.1.2 | |||
| qosDeviceConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.2 | |||
| qosDevicePibIncarnationTable OBJECT-TYPE This class contains a single policy instance that identifies the current incarnation of the PIB and the PDP that installed this incarnation. The instance of this class is reported to the PDP at client connect time so that the PDP can (attempt to) ascertain the current state of the PIB. | 1.3.6.1.4.1.9.18.2.1.2.1 | not-accessible | current | |
| qosDevicePibIncarnationEntry OBJECT-TYPE The single policy instance of this class identifies the current incarnation of the PIB and the PDP that installed this incarnation. | 1.3.6.1.4.1.9.18.2.1.2.1.1 | not-accessible | current | |
| qosDeviceIncarnationId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.2.1.1.1 | PolicyInstanceId | not-accessible | current |
| qosDevicePdpName OBJECT-TYPE The name of the PDP that installed the current incarnation of the PIB into the device. By default it is the zero length string. | 1.3.6.1.4.1.9.18.2.1.2.1.1.2 | DisplayString | read-only | current |
| qosDevicePibIncarnation OBJECT-TYPE An octet string to identify the current incarnation. It has meaning to the PDP that installed the PIB and perhaps its standby PDPs. By default the empty string. | 1.3.6.1.4.1.9.18.2.1.2.1.1.3 | OCTET STRING (SIZE(128)) | read-only | current |
| qosDevicePibTtl OBJECT-TYPE The number of seconds after a client close or TCP timeout for which the PEP continues to enforce the policy in the PIB. After this interval, the PIB is consired expired and the device no longer enforces the policy installed in the PIB. | 1.3.6.1.4.1.9.18.2.1.2.1.1.4 | Unsigned32 | read-only | current |
| qosDeviceAttributeTable OBJECT-TYPE The single instance of this class indicates specific attributes of the device. These include configuration values such as the configured PDP addresses, the maximum message size, and specific device capabilities. The latter include input port-based and output port-based classification and/or policing, support for flow based policing, aggregate based policing, traffic shaping capabilities, etc. | 1.3.6.1.4.1.9.18.2.1.2.2 | not-accessible | current | |
| qosDeviceAttributeEntry OBJECT-TYPE The single instance of this class indicates specific attributes of the device. | 1.3.6.1.4.1.9.18.2.1.2.2.1 | not-accessible | current | |
| qosDeviceAttributeId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.2.2.1.1 | PolicyInstanceId | not-accessible | current |
| qosDevicePepDomain OBJECT-TYPE The QoS domain that this device belongs to. This is configured locally on the device (perhaps by some management protocol such as SNMP). By default, it is the zero-length string. | 1.3.6.1.4.1.9.18.2.1.2.2.1.2 | DisplayString | read-only | current |
| qosDevicePrimaryPdp OBJECT-TYPE The address of the PDP configured to be the primary PDP for the device. | 1.3.6.1.4.1.9.18.2.1.2.2.1.3 | IpAddress | read-only | current |
| qosDeviceSecondaryPdp OBJECT-TYPE The address of the PDP configured to be the secondary PDP for the device. An address of zero indicates no secondary is configured. | 1.3.6.1.4.1.9.18.2.1.2.2.1.4 | IpAddress | read-only | current |
| qosDeviceMaxMessageSize OBJECT-TYPE The maximum size message that this PEP is capable of receiving in bytes. A value of zero means that the maximum message size is unspecified (but does not mean it is unlimited). A message greater than this maximum results in a MessageTooBig error on a 'no commit' REP. | 1.3.6.1.4.1.9.18.2.1.2.2.1.5 | Unsigned32 | read-only | current |
| qosDeviceCapabilities OBJECT-TYPE An enumeration of device capabilities. Used by the PDP to select policies and configuration to push to the PEP. | 1.3.6.1.4.1.9.18.2.1.2.2.1.6 | Bits {unspecified(0), layer2Cos(1), ipPrecedence(2), dscp(3)} | read-only | current |
| qosInterfaceTypeTable OBJECT-TYPE This class describes the interface types of the interfaces that exist on the device. It includes the queue type, role combination and capabilities of interfaces. The PEP does not report which specific interfaces have which characteristics. | 1.3.6.1.4.1.9.18.2.1.2.3 | not-accessible | current | |
| qosInterfaceTypeEntry OBJECT-TYPE An instance of this class describes a role combination for an interface type of an interface that exists on the device. | 1.3.6.1.4.1.9.18.2.1.2.3.1 | not-accessible | current | |
| qosInterfaceTypeId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.2.3.1.1 | PolicyInstanceId | not-accessible | current |
| qosInterfaceQueueType OBJECT-TYPE The interface type in terms of number of queues and thresholds. | 1.3.6.1.4.1.9.18.2.1.2.3.1.2 | QosInterfaceQueueType | read-only | current |
| qosInterfaceTypeRoles OBJECT-TYPE A combination of roles on at least one interface of type qosInterfaceType. | 1.3.6.1.4.1.9.18.2.1.2.3.1.3 | RoleCombination | read-only | current |
| qosInterfaceTypeCapabilities OBJECT-TYPE An enumeration of interface capabilities. Used by the PDP to select policies and configuration to push to the PEP. | 1.3.6.1.4.1.9.18.2.1.2.3.1.4 | QosInterfaceTypeCapabilities | read-only | current |
| qosDomainConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.3 | |||
| qosDiffServMappingTable OBJECT-TYPE Maps each DSCP to a marked-down DSCP. Also maps each DSCP to an IP precedence and QosLayer2Cos. When configured for the first time, all 64 entries of the table must be specified. Thereafter, instances may be modified (with a delete and install in a single decision) but not deleted unless all instances are deleted. | 1.3.6.1.4.1.9.18.2.1.3.1 | not-accessible | current | |
| qosDiffServMappingEntry OBJECT-TYPE An instance of this class represents mappings from a DSCP. | 1.3.6.1.4.1.9.18.2.1.3.1.1 | not-accessible | current | |
| qosDscp OBJECT-TYPE A DSCP for which this entry contains mappings. | 1.3.6.1.4.1.9.18.2.1.3.1.1.1 | Dscp | not-accessible | current |
| qosMarkedDscp OBJECT-TYPE The DSCP to use instead of the qosDscp when the packet is out of profile and hence marked as such. | 1.3.6.1.4.1.9.18.2.1.3.1.1.2 | Dscp | read-only | current |
| qosL2Cos OBJECT-TYPE The L2 CoS value to use when mapping this DSCP to layer 2 CoS. | 1.3.6.1.4.1.9.18.2.1.3.1.1.3 | QosLayer2Cos | read-only | current |
| qosCosToDscpTable OBJECT-TYPE Maps each of eight CoS values to a DSCP. When configured for the first time, all 8 entries of the table must be specified. Thereafter, instances may be modified (with a delete and install in a single decision) but not deleted unless all instances are deleted. | 1.3.6.1.4.1.9.18.2.1.3.2 | not-accessible | current | |
| qosCosToDscpEntry OBJECT-TYPE An instance of this class maps a CoS value to a DSCP. | 1.3.6.1.4.1.9.18.2.1.3.2.1 | not-accessible | current | |
| qosCosToDscpCos OBJECT-TYPE The L2 CoS value that is being mapped. | 1.3.6.1.4.1.9.18.2.1.3.2.1.1 | QosLayer2Cos | not-accessible | current |
| qosCosToDscpDscp OBJECT-TYPE The DSCP value to use when mapping the L2 CoS to a DSCP. | 1.3.6.1.4.1.9.18.2.1.3.2.1.2 | Dscp | read-only | current |
| qosUnmatchedPolicy OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.4 | |||
| qosUnmatchedPolicyTable OBJECT-TYPE A policy class that specifies what QoS to apply to a packet that does not match any other policy configured for this role combination for a particular direction of traffic. | 1.3.6.1.4.1.9.18.2.1.4.1 | not-accessible | current | |
| qosUnmatchedPolicyEntry OBJECT-TYPE An instance of this class specifies the unmatched policy for a particular role combination for incoming or outgoing traffic. | 1.3.6.1.4.1.9.18.2.1.4.1.1 | not-accessible | current | |
| qosUnmatchedPolicyId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.4.1.1.1 | PolicyInstanceId | not-accessible | current |
| qosUnmatchedPolicyRole OBJECT-TYPE Role combination for which this instance applies. | 1.3.6.1.4.1.9.18.2.1.4.1.1.2 | RoleCombination | read-only | current |
| qosUnmatchedPolicyDirection OBJECT-TYPE The direction of packet flow at the interface in question to which this instance applies. | 1.3.6.1.4.1.9.18.2.1.4.1.1.3 | INTEGER {in(0), out(1)} | read-only | current |
| qosUnmatchedPolicyDscp OBJECT-TYPE The DSCP to classify the unmatched packet with. This must be specified even if qosUnmatchedPolicyDscpTrusted is true. | 1.3.6.1.4.1.9.18.2.1.4.1.1.4 | Dscp | read-only | current |
| qosUnmatchedPolicyDscpTrusted OBJECT-TYPE If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored) unless this is a non-IP packet and arrives untagged. The packet is still policed as part of its micro flow and its aggregate flow. When a trusted action is applied to an input interface, the Dscp (for an IP packet) or CoS (for a non-IP packet) associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing. | 1.3.6.1.4.1.9.18.2.1.4.1.1.5 | TruthValue | read-only | current |
| qosUnmatchPolMicroFlowPolicerId OBJECT-TYPE An index identifying the instance of policer to apply to unmatched packets. It must correspond to the integer index of an instance of class qosPolicerTable or be zero. If zero, the microflow is not policed. | 1.3.6.1.4.1.9.18.2.1.4.1.1.6 | PolicyInstanceId | read-only | current |
| qosUnmatchedPolicyAggregateId OBJECT-TYPE An index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and is not policed as part of any aggregate. | 1.3.6.1.4.1.9.18.2.1.4.1.1.7 | PolicyInstanceId | read-only | current |
| qosPolicer OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.5 | |||
| qosPolicerTable OBJECT-TYPE A class specifying policing parameters for both microflows and aggregate flows. This table is designed for policing according to a token bucket scheme where an average rate and burst size is specified. | 1.3.6.1.4.1.9.18.2.1.5.1 | not-accessible | current | |
| qosPolicerEntry OBJECT-TYPE An instance of this class specifies a set of policing parameters. | 1.3.6.1.4.1.9.18.2.1.5.1.1 | not-accessible | current | |
| qosPolicerId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.5.1.1.1 | PolicyInstanceId | not-accessible | current |
| qosPolicerRate OBJECT-TYPE The token rate. It is specified in units of bit/s. A rate of zero means that all packets will be out of profile. If the qosPolicerAction is set to drop then this effectively denies any service to packets policed by this policer. | 1.3.6.1.4.1.9.18.2.1.5.1.1.2 | Unsigned64 | read-only | current |
| qosPolicerNormalBurst OBJECT-TYPE The normal size of a burst in terms of bits. | 1.3.6.1.4.1.9.18.2.1.5.1.1.3 | Unsigned32 | read-only | current |
| qosPolicerExcessBurst OBJECT-TYPE The excess size of a burst in terms of bits. | 1.3.6.1.4.1.9.18.2.1.5.1.1.4 | Unsigned32 | read-only | current |
| qosPolicerAction OBJECT-TYPE An indication of how to handle out of profile packets. When the shape action is chosen then traffic is shaped to the rate specified by qosPolicerRate. | 1.3.6.1.4.1.9.18.2.1.5.1.1.5 | INTEGER {drop(0), mark(1), shape(2)} | read-only | current |
| qosAggregateTable OBJECT-TYPE Instances of this class identify aggregate flows and the policer to apply to each. | 1.3.6.1.4.1.9.18.2.1.5.2 | not-accessible | current | |
| qosAggregateEntry OBJECT-TYPE An instance of this class specifies the policer to apply to an aggregate flow. | 1.3.6.1.4.1.9.18.2.1.5.2.1 | not-accessible | current | |
| qosAggregateId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.5.2.1.1 | PolicyInstanceId | not-accessible | current |
| qosAggregatePolicerId OBJECT-TYPE An index identifying the instance of policer to apply to the aggregate. It must correspond to the integer index of an instance of class qosPolicerTable. | 1.3.6.1.4.1.9.18.2.1.5.2.1.2 | PolicyInstanceId | read-only | current |
| qosMacQos OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.6 | |||
| qosMacClassificationTable OBJECT-TYPE A class of MAC/Vlan tuples and their associated CoS values. | 1.3.6.1.4.1.9.18.2.1.6.1 | not-accessible | current | |
| qosMacClassificationEntry OBJECT-TYPE An instance of this class specifies the mapping of a VLAN and a MAC address to a CoS value. | 1.3.6.1.4.1.9.18.2.1.6.1.1 | not-accessible | current | |
| qosMacClassificationId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.6.1.1.1 | PolicyInstanceId | not-accessible | current |
| qosDstMacVlan OBJECT-TYPE The VLAN of the destination MAC address of the L2 frame. | 1.3.6.1.4.1.9.18.2.1.6.1.1.2 | INTEGER (1..4095) | read-only | current |
| qosDstMacAddress OBJECT-TYPE The destination MAC address of the L2 frame. | 1.3.6.1.4.1.9.18.2.1.6.1.1.3 | MacAddress | read-only | current |
| qosDstMacCos OBJECT-TYPE The CoS to assign the packet with the associated MAC/VLAN tuple. Note that this CoS is overridden by the policies to classify the frame at layer 3 if there are any. | 1.3.6.1.4.1.9.18.2.1.6.1.1.4 | QosLayer2Cos | read-only | current |
| qosIpQos OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.7 | |||
| qosIpAceTable OBJECT-TYPE ACE definitions. | 1.3.6.1.4.1.9.18.2.1.7.1 | not-accessible | current | |
| qosIpAceEntry OBJECT-TYPE An instance of this class specifies an ACE. | 1.3.6.1.4.1.9.18.2.1.7.1.1 | not-accessible | current | |
| qosIpAceId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.7.1.1.1 | PolicyInstanceId | not-accessible | current |
| qosIpAceDstAddr OBJECT-TYPE The IP address to match against the packet's destination IP address. | 1.3.6.1.4.1.9.18.2.1.7.1.1.2 | IpAddress | read-only | current |
| qosIpAceDstAddrMask OBJECT-TYPE A mask for the matching of the destination IP address. | 1.3.6.1.4.1.9.18.2.1.7.1.1.3 | IpAddress | read-only | current |
| qosIpAceSrcAddr OBJECT-TYPE The IP address to match against the packet's source IP address. | 1.3.6.1.4.1.9.18.2.1.7.1.1.4 | IpAddress | read-only | current |
| qosIpAceSrcAddrMask OBJECT-TYPE A mask for the matching of the source IP address. | 1.3.6.1.4.1.9.18.2.1.7.1.1.5 | IpAddress | read-only | current |
| qosIpAceDscpMin OBJECT-TYPE The minimum value that the DSCP in the packet can have and match this ACE. | 1.3.6.1.4.1.9.18.2.1.7.1.1.6 | Dscp | read-only | current |
| qosIpAceDscpMax OBJECT-TYPE The maximum value that the DSCP in the packet can have and match this ACE. | 1.3.6.1.4.1.9.18.2.1.7.1.1.7 | Dscp | read-only | current |
| qosIpAceProtocol OBJECT-TYPE The IP protocol to match against the packet's protocol. A value of zero means match all. | 1.3.6.1.4.1.9.18.2.1.7.1.1.8 | INTEGER (0..255) | read-only | current |
| qosIpAceDstL4PortMin OBJECT-TYPE The minimum value that the packet's layer 4 dest port number can have and match this ACE. | 1.3.6.1.4.1.9.18.2.1.7.1.1.9 | INTEGER (0..65535) | read-only | current |
| qosIpAceDstL4PortMax OBJECT-TYPE The maximum value that the packet's layer 4 dest port number can have and match this ACE. | 1.3.6.1.4.1.9.18.2.1.7.1.1.10 | INTEGER (0..65535) | read-only | current |
| qosIpAceSrcL4PortMin OBJECT-TYPE The minimum value that the packet's layer 4 source port number can have and match this ACE. | 1.3.6.1.4.1.9.18.2.1.7.1.1.11 | INTEGER (0..65535) | read-only | current |
| qosIpAceSrcL4PortMax OBJECT-TYPE The maximum value that the packet's layer 4 source port number can have and match this ACE. | 1.3.6.1.4.1.9.18.2.1.7.1.1.12 | INTEGER (0..65535) | read-only | current |
| qosIpAcePermit OBJECT-TYPE If the packet matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this ACE (indirectly through the ACL) is applied to the packet. If the value of this attribute is false, then no more ACEs in this ACL are compared to this packet and matching continues with the first ACE of the next ACL. | 1.3.6.1.4.1.9.18.2.1.7.1.1.13 | TruthValue | read-only | current |
| qosIpAclDefinitionTable OBJECT-TYPE A class that defines a set of ACLs each being an ordered list of ACEs. | 1.3.6.1.4.1.9.18.2.1.7.2 | not-accessible | current | |
| qosIpAclDefinitionEntry OBJECT-TYPE An instance of this class specifies an ACE in an ACL and its order with respect to other ACEs in the same ACL. | 1.3.6.1.4.1.9.18.2.1.7.2.1 | not-accessible | current | |
| qosIpAclDefinitionId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.7.2.1.1 | PolicyInstanceId | not-accessible | current |
| qosIpAclId OBJECT-TYPE An index for this ACL. There will be one instance of policy class qosIpAclDefinition with this integer index for each ACE in the ACL per role combination. | 1.3.6.1.4.1.9.18.2.1.7.2.1.2 | PolicyInstanceId | read-only | current |
| qosIpAceOrder OBJECT-TYPE An integer that determines the position of this ACE in the ACL. An ACE with a given order is positioned in the access contol list before one with a higher order. | 1.3.6.1.4.1.9.18.2.1.7.2.1.3 | Unsigned32 | read-only | current |
| qosIpAclDefAceId OBJECT-TYPE This attribute specifies the ACE in the qosIpAceTable that is in the ACL specified by qosIpAclId at the position specified by qosIpAceOrder. | 1.3.6.1.4.1.9.18.2.1.7.2.1.4 | PolicyInstanceId | read-only | current |
| qosIpAclActionTable OBJECT-TYPE A class that applies a set of ACLs to interfaces specifying, for each interface the order of the ACL with respect to other ACLs applied to the same interface and, for each ACL the action to take for a packet that matches a permit ACE in that ACL. Interfaces are specified abstractly in terms of interface role combinations. | 1.3.6.1.4.1.9.18.2.1.7.3 | not-accessible | current | |
| qosIpAclActionEntry OBJECT-TYPE An instance of this class applies an ACL to traffic in a particular direction on an interface with a particular role combination, and specifies the action for packets which match the ACL. | 1.3.6.1.4.1.9.18.2.1.7.3.1 | not-accessible | current | |
| qosIpAclActionId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.7.3.1.1 | PolicyInstanceId | not-accessible | current |
| qosIpAclActAclId OBJECT-TYPE The ACL associated with this action. | 1.3.6.1.4.1.9.18.2.1.7.3.1.2 | PolicyInstanceId | read-only | current |
| qosIpAclInterfaceRoles OBJECT-TYPE The interfaces to which this ACL applies specified in terms of a set of roles. | 1.3.6.1.4.1.9.18.2.1.7.3.1.3 | RoleCombination | read-only | current |
| qosIpAclInterfaceDirection OBJECT-TYPE The direction of packet flow at the interface in question to which this ACL applies. | 1.3.6.1.4.1.9.18.2.1.7.3.1.4 | INTEGER {in(0), out(1)} | read-only | current |
| qosIpAclOrder OBJECT-TYPE An integer that determines the order of this ACL in the list of ACLs applied to interfaces of the specified role combination. An ACL with a given order is positioned in the list before one with a higher order. | 1.3.6.1.4.1.9.18.2.1.7.3.1.5 | Unsigned32 | read-only | current |
| qosIpAclDscp OBJECT-TYPE The DSCP to classify the packet with in the event that the packet matches an ACE in this ACL and the ACE is a permit. | 1.3.6.1.4.1.9.18.2.1.7.3.1.6 | Dscp | read-only | current |
| qosIpAclDscpTrusted OBJECT-TYPE If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosIpAclDscp (qosIpAclDscp is ignored). The packet is still policed as part of its micro flow and its aggregate flow. When a trusted action is applied to an input interface, the Dscp associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing. | 1.3.6.1.4.1.9.18.2.1.7.3.1.7 | TruthValue | read-only | current |
| qosIpAclMicroFlowPolicerId OBJECT-TYPE An index identifying the instance of policer to apply to the microflow. It must correspond to the integer index of an instance of class qosPolicerTableor be zero. If zero, the microflow is not policed. | 1.3.6.1.4.1.9.18.2.1.7.3.1.8 | PolicyInstanceId | read-only | current |
| qosIpAclAggregateId OBJECT-TYPE An index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and is not policed as part of any aggregate. | 1.3.6.1.4.1.9.18.2.1.7.3.1.9 | PolicyInstanceId | read-only | current |
| qosIfParameters OBJECT-IDENTITY | 1.3.6.1.4.1.9.18.2.1.8 | |||
| qosIfSchedulingPreferencesTable OBJECT-TYPE This class specifies the scheduling preference an interface chooses if it supports multiple scheduling types. Higher values are preferred over lower values. | 1.3.6.1.4.1.9.18.2.1.8.1 | not-accessible | current | |
| qosIfSchedulingPreferenceEntry OBJECT-TYPE An instance of this class specifies a scheduling preference for a queue-type on an interface with a particular role combination. | 1.3.6.1.4.1.9.18.2.1.8.1.1 | not-accessible | current | |
| qosIfSchedulingPreferenceId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.8.1.1.1 | PolicyInstanceId | not-accessible | current |
| qosIfSchedulingRoles OBJECT-TYPE The combination of roles the interface must have for this policy instance to apply to that interface. | 1.3.6.1.4.1.9.18.2.1.8.1.1.2 | RoleCombination | read-only | current |
| qosIfSchedulingPreference OBJECT-TYPE The preference to use this scheduling discipline and queue type. A higher value means a higher preference. If two disciplines have the same preference the choice is a local decision. | 1.3.6.1.4.1.9.18.2.1.8.1.1.3 | INTEGER (1..16) | read-only | current |
| qosIfSchedulingDiscipline OBJECT-TYPE An enumerate type for all the known scheduling disciplines. | 1.3.6.1.4.1.9.18.2.1.8.1.1.4 | INTEGER {weightedFairQueueing(1), weightedRoundRobin(2), customQueueing(3), priorityQueueing(4), classBasedWFQ(5), fifo(6), pqWrr(7), pqCbwfq(8)} | read-only | current |
| qosIfSchedulingQueueType OBJECT-TYPE The queue type of this preference. | 1.3.6.1.4.1.9.18.2.1.8.1.1.5 | QosInterfaceQueueType | read-only | current |
| qosIfDropPreferenceTable OBJECT-TYPE This class specifies the preference of the drop mechanism an interface chooses if it supports multiple drop mechanisms. Higher values are preferred over lower values. | 1.3.6.1.4.1.9.18.2.1.8.2 | not-accessible | current | |
| qosIfDropPreferenceEntry OBJECT-TYPE An instance of this class specifies a drop preference for a drop mechanism on an interface with a particular role combination. | 1.3.6.1.4.1.9.18.2.1.8.2.1 | not-accessible | current | |
| qosIfDropPreferenceId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.8.2.1.1 | PolicyInstanceId | not-accessible | current |
| qosIfDropRoles OBJECT-TYPE The combination of roles the interface must have for this policy instance to apply to that interface. | 1.3.6.1.4.1.9.18.2.1.8.2.1.2 | RoleCombination | read-only | current |
| qosIfDropPreference OBJECT-TYPE The preference to use this drop mechanism. A higher value means a higher preference. If two mechanisms have the same preference the choice is a local decision. | 1.3.6.1.4.1.9.18.2.1.8.2.1.3 | INTEGER (1..16) | read-only | current |
| qosIfDropDiscipline OBJECT-TYPE An enumerate type for all the known drop mechanisms. | 1.3.6.1.4.1.9.18.2.1.8.2.1.4 | INTEGER {qosIfDropWRED(1), qosIfDropTailDrop(2)} | read-only | current |
| qosIfDscpAssignmentTable OBJECT-TYPE The assignment of each DSCP to a queue and threshold for each interface queue type. | 1.3.6.1.4.1.9.18.2.1.8.3 | not-accessible | current | |
| qosIfDscpAssignmentEntry OBJECT-TYPE An instance of this class specifies the queue and threshold set for a packet with a particular DSCP on an interface of a particular type with a particular role combination. | 1.3.6.1.4.1.9.18.2.1.8.3.1 | not-accessible | current | |
| qosIfDscpAssignmentId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.8.3.1.1 | PolicyInstanceId | not-accessible | current |
| qosIfDscpRoles OBJECT-TYPE The role combination the interface must be configured with. | 1.3.6.1.4.1.9.18.2.1.8.3.1.2 | RoleCombination | read-only | current |
| qosIfQueueType OBJECT-TYPE The interface queue type to which this row applies. | 1.3.6.1.4.1.9.18.2.1.8.3.1.3 | QosInterfaceQueueType | read-only | current |
| qosIfDscp OBJECT-TYPE The DSCP to which this row applies. | 1.3.6.1.4.1.9.18.2.1.8.3.1.4 | Dscp | read-only | current |
| qosIfQueue OBJECT-TYPE The queue to which the DSCP applies for the given interface type. | 1.3.6.1.4.1.9.18.2.1.8.3.1.5 | INTEGER (1..64) | read-only | current |
| qosIfThresholdSet OBJECT-TYPE The threshold set of the specified queue to which the DSCP applies for the given interface type. | 1.3.6.1.4.1.9.18.2.1.8.3.1.6 | INTEGER (1..8) | read-only | current |
| qosIfRedTable OBJECT-TYPE A class of lower and upper values for each threshold set in a queue supporting WRED. If the size of the queue for a given threshold is below the lower value then packets assigned to that threshold are always accepted into the queue. If the size of the queue is above upper value then packets are always dropped. If the size of the queue is between the lower and the upper then packets are randomly dropped. | 1.3.6.1.4.1.9.18.2.1.8.4 | not-accessible | current | |
| qosIfRedEntry OBJECT-TYPE An instance of this class specifies threshold limits for a particular RED threshold of a given threshold set on an interface and with a particular role combination. | 1.3.6.1.4.1.9.18.2.1.8.4.1 | not-accessible | current | |
| qosIfRedId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.8.4.1.1 | PolicyInstanceId | not-accessible | current |
| qosIfRedRoles OBJECT-TYPE The role combination the interface must be configured with. | 1.3.6.1.4.1.9.18.2.1.8.4.1.2 | RoleCombination | read-only | current |
| qosIfRedNumThresholdSets OBJECT-TYPE The values in this entry apply only to queues with the number of thresholds specified by this attribute. | 1.3.6.1.4.1.9.18.2.1.8.4.1.3 | ThresholdSetRange | read-only | current |
| qosIfRedThresholdSet OBJECT-TYPE The threshold set to which the lower and upper values apply. It must be in the range 1 through qosIfRedNumThresholdSets. There must be exactly one PRI for each value in this range. | 1.3.6.1.4.1.9.18.2.1.8.4.1.4 | INTEGER (1..8) | read-only | current |
| qosIfRedThresholdSetLower OBJECT-TYPE The threshold value below which no packets are dropped. | 1.3.6.1.4.1.9.18.2.1.8.4.1.5 | Percent | read-only | current |
| qosIfRedThresholdSetUpper OBJECT-TYPE The threshold value above which all packets are dropped. | 1.3.6.1.4.1.9.18.2.1.8.4.1.6 | Percent | read-only | current |
| qosIfTailDropTable OBJECT-TYPE A class for threshold sets in a queue supporting tail drop. If the size of the queue for a given threshold set is at or below the specified value then packets assigned to that threshold set are always accepted into the queue. If the size of the queue is above the specified value then packets are always dropped. | 1.3.6.1.4.1.9.18.2.1.8.5 | not-accessible | current | |
| qosIfTailDropEntry OBJECT-TYPE An instance of this class specifies the queue depth for a particular tail-drop threshold set on an interface with a particular role combination. | 1.3.6.1.4.1.9.18.2.1.8.5.1 | not-accessible | current | |
| qosIfTailDropId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.8.5.1.1 | PolicyInstanceId | not-accessible | current |
| qosIfTailDropRoles OBJECT-TYPE The role combination the interface must be configured with. | 1.3.6.1.4.1.9.18.2.1.8.5.1.2 | RoleCombination | read-only | current |
| qosIfTailDropNumThresholdSets OBJECT-TYPE The value in this entry applies only to queues with the number of thresholds specified by this attribute. | 1.3.6.1.4.1.9.18.2.1.8.5.1.3 | ThresholdSetRange | read-only | current |
| qosIfTailDropThresholdSet OBJECT-TYPE The threshold set to which the threshold value applies | 1.3.6.1.4.1.9.18.2.1.8.5.1.4 | INTEGER (1..8) | read-only | current |
| qosIfTailDropThresholdSetValue OBJECT-TYPE The threshold value above which packets are dropped. | 1.3.6.1.4.1.9.18.2.1.8.5.1.5 | Percent | read-only | current |
| qosIfWeightsTable OBJECT-TYPE A class of scheduling weights for each queue of an interface that supports weighted round robin scheduling or a mix of priority queueing and weighted round robin. For a queue with N priority queues, the N highest queue numbers are the priority queues with the highest queue number having the highest priority. WRR is applied to the non-priority queues. | 1.3.6.1.4.1.9.18.2.1.8.6 | not-accessible | current | |
| qosIfWeightsEntry OBJECT-TYPE An instance of this class specifies the scheduling weight for a particular queue of an interface with a particular number of queues and with a particular role combination. | 1.3.6.1.4.1.9.18.2.1.8.6.1 | not-accessible | current | |
| qosIfWeightsId OBJECT-TYPE An integer index to identify the instance of the policy class. | 1.3.6.1.4.1.9.18.2.1.8.6.1.1 | PolicyInstanceId | not-accessible | current |
| qosIfWeightsRoles OBJECT-TYPE The role combination the interface must be configured with. | 1.3.6.1.4.1.9.18.2.1.8.6.1.2 | RoleCombination | read-only | current |
| qosIfWeightsNumQueues OBJECT-TYPE The value of the weight in this instance applies only to interfaces with the number of queues specified by this attribute. | 1.3.6.1.4.1.9.18.2.1.8.6.1.3 | QueueRange | read-only | current |
| qosIfWeightsQueue OBJECT-TYPE The queue to which the weight applies. | 1.3.6.1.4.1.9.18.2.1.8.6.1.4 | INTEGER (1..64) | read-only | current |
| qosIfWeightsDrainSize OBJECT-TYPE The maximum number of bytes that may be drained from the queue in one cycle. The percentage of the bandwith allocated to this queue can be calculated from this attribute and the sum of the drain sizes of all the non-priority queues of the interface. | 1.3.6.1.4.1.9.18.2.1.8.6.1.5 | Unsigned32 | read-only | current |
| qosIfWeightsQueueSize OBJECT-TYPE The size of the queue in bytes. Some devices set queue size in terms of packets. These devices must calculate the queue size in packets by assuming an average packet size suitable for the particular interface. Some devices have a fixed size buffer to be shared among all queues. These devices must allocate a fraction of the total buffer space to this queue calculated as the the ratio of the queue size to the sum of the queue sizes for the interface. | 1.3.6.1.4.1.9.18.2.1.8.6.1.6 | Unsigned32 | read-only | current |
Conformance
| Name | OID | Status |
|---|---|---|
| qosPIBCompliance MODULE-COMPLIANCE The compliance statement for the QOS Policy Derived MIB. | 1.3.6.1.4.1.9.18.2.1.1.1.1 | current |
| qosDevicePibIncarnationTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.1 | current |
| qosDeviceAttributeTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.2 | current |
| qosInterfaceTypeTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.3 | current |
| qosDiffServMappingTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.4 | current |
| qosCosToDscpTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.5 | current |
| qosUnmatchedPolicyTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.6 | current |
| qosPolicerTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.7 | current |
| qosAggregateTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.8 | current |
| qosMacClassificationTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.9 | current |
| qosIpAceTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.10 | current |
| qosIpAclDefinitionTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.11 | current |
| qosIpAclActionTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.12 | current |
| qosIfSchedulingPreferencesTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.13 | current |
| qosIfDropPreferenceTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.14 | current |
| qosIfDscpAssignmentTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.15 | current |
| qosIfRedTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.16 | current |
| qosIfTailDropTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.17 | current |
| qosIfWeightsTableGroup OBJECT-GROUP | 1.3.6.1.4.1.9.18.2.1.1.2.18 | current |