CISCO-L2-TUNNEL-CONFIG-MIB
- Registered at
- 1.3.6.1.4.1.9.9.246
- Last updated
- 2007-02-15 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2007-02-15 00:00, 2006-07-25 00:00, 2005-06-27 00:00, 2004-06-09 00:00, 2003-09-03 00:00, 2002-05-31 10:00, 2002-02-14 00:00
- Namespace
- cisco
- Source file
CISCO-L2-TUNNEL-CONFIG-MIB- Digest
sha256:0a6169063e911420f3adec1e23ed8d7cef327eff4f6d57751360ceab4c481608
Description
This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be considered as a single VLAN. These separate networks are connected via an ISP, which will tunnel the packets from one network to another, making it appear as if the two networks are actually just one.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-lan-switch-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-QOS-PIB-MIB | QosLayer2Cos |
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-L2-TUNNEL-CONFIG-MIB CISCO-QOS-PIB-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cltcMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.1 | |||
| cltcGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.1.1 | |||
| cltcTunnelCos OBJECT-TYPE Specifies the user priority of the tunneled PDUs and applies to all ingress tunneling interfaces. | 1.3.6.1.4.1.9.9.246.1.1.1 | QosLayer2Cos | read-write | current |
| cltcNotificationEnable OBJECT-TYPE This object indicates whether the system will generate the cltcTunnelDropThresholdExceeded and cltcTunnelShutdownThresholdExceeded notifications. | 1.3.6.1.4.1.9.9.246.1.1.2 | TruthValue | read-write | current |
| cltcTunnelSysDropThreshold OBJECT-TYPE This object specifies the drop threshold at the system level. A value of zero indicates that system level rate limiting is disabled. | 1.3.6.1.4.1.9.9.246.1.1.3 | Unsigned32 | read-write | current |
| cltcTunnelSysDropNotifEnable OBJECT-TYPE This object specifies whether the system will generate the cltcTunnelSysDropThresholdExceeded notification. | 1.3.6.1.4.1.9.9.246.1.1.4 | TruthValue | read-write | current |
| cltcDot1qTunnel OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.1.2 | |||
| cltcDot1qTunnelTable OBJECT-TYPE This table contains information about the dot1q tunnel interfaces. Only dot1q tunneling capable interfaces are shown. 1Q-in-1Q will allow service providers to separate the traffic of various customers within their infrastructure while the customers appear to be on the same VLANs. | 1.3.6.1.4.1.9.9.246.1.2.1 | not-accessible | current | |
| cltcDot1qTunnelEntry OBJECT-TYPE Information about the dot1q tunnel. Only dot1q tunneling capable interfaces are shown. | 1.3.6.1.4.1.9.9.246.1.2.1.1 | not-accessible | current | |
| cltcDot1qTunnelMode OBJECT-TYPE Indicates the dot1q tunnel mode of the interface. Setting the interface to dot1q tunnel 'disabled' mode causes the dot1q tunnel feature to be disabled on this interface. Setting the interface to dot1q tunnel 'enabled' mode causes the dot1q tunnel feature to be enabled on this interface. | 1.3.6.1.4.1.9.9.246.1.2.1.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| cltcTunneledProtocol OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.1.3 | |||
| cltcTunneledProtocolTable OBJECT-TYPE This table contains information about the protocols being tunneled. Only tunneled protocol filtering capable interfaces are shown. | 1.3.6.1.4.1.9.9.246.1.3.1 | not-accessible | current | |
| cltcTunneledProtocolEntry OBJECT-TYPE Information about the protocols being tunneled. Only tunneled protocol filtering capable interfaces are shown. | 1.3.6.1.4.1.9.9.246.1.3.1.1 | not-accessible | current | |
| cltcTunneledProtocolType OBJECT-TYPE Indicates tunneled protocol of the interface. If a BIT is set, then the value of the corresponding protocol is tunneled. Specifically, if the 'cdp(0)' BIT is set, then the Cisco Discovery Protocol PDU is tunneled; if the 'vtp(1)' BIT is set, then the VLAN Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT is set, then the Spanning Tree Protocol PDU is tunneled; if the 'eoam(3)' BIT is set, then the ethernet Operation, Administration and Maintenance PDU is tunneled; if the 'lldp(4)' BIT is set, then the Link Layer Discovery Protocol is tunneled. If the bit for a given protocol is set for an interface, then the statistics for that interface and protocol will start to be monitored. | 1.3.6.1.4.1.9.9.246.1.3.1.1.1 | Bits {cdp(0), vtp(1), stp(2), eoam(3), lldp(4)} | read-write | current |
| cltcTunnelThreshold OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.1.4 | |||
| cltcTunnelThresholdTable OBJECT-TYPE This table contains information about the thresholds for protocol tunneling. Only tunneled protocol filtering capable interfaces are shown. The objects will be on a per interface, per protocol basis. | 1.3.6.1.4.1.9.9.246.1.4.1 | not-accessible | current | |
| cltcTunnelThresholdEntry OBJECT-TYPE Information about the thresholds for protocol tunneling. Only tunneled protocol filtering capable interfaces are shown. The entries will be on a per interface, per protocol basis | 1.3.6.1.4.1.9.9.246.1.4.1.1 | not-accessible | current | |
| cltcTunnelThresholdProtocolIndex OBJECT-TYPE A tunneled protocol of an interface. - all(1) is supported for devices which allow the setting of thresholds on a per interface basis. This threshold is a combined threshold for the interface which includes all supported protocols. - cdp(2), vtp(3), stp(4), eoam(5) and lldp(6) are supported for devices which allow the setting of thresholds on a per interface, per protocol basis. | 1.3.6.1.4.1.9.9.246.1.4.1.1.1 | INTEGER {all(1), cdp(2), vtp(3), stp(4), eoam(5), lldp(6)} | not-accessible | current |
| cltcTunnelDropThreshold OBJECT-TYPE The drop threshold on an interface for a given protocol. After reaching this drop threshold, the interface will start dropping PDUs for the given protocol. This value cannot be greater than the value of cltcTunnelShutdownThreshold. A value of 0 indicates that no limit is set. | 1.3.6.1.4.1.9.9.246.1.4.1.1.2 | Unsigned32 | read-write | current |
| cltcTunnelShutdownThreshold OBJECT-TYPE The shutdown threshold on an interface for a given protocol. After reaching the shutdown threshold, the interface will shutdown for the given protocol. This value cannot be less than the value of cltcTunnelDropThreshold. A value of 0 indicates that no limit is set. | 1.3.6.1.4.1.9.9.246.1.4.1.1.3 | Unsigned32 | read-write | current |
| cltcTunnelStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.1.5 | |||
| cltcTunnelStatisticsTable OBJECT-TYPE This table contains protocol tunneling statistics on the interface. | 1.3.6.1.4.1.9.9.246.1.5.1 | not-accessible | current | |
| cltcTunnelStatisticsEntry OBJECT-TYPE Protocol tunneling statistics on the interface. | 1.3.6.1.4.1.9.9.246.1.5.1.1 | not-accessible | current | |
| cltcTunneledProtocolIndex OBJECT-TYPE A tunneled protocol of an interface. | 1.3.6.1.4.1.9.9.246.1.5.1.1.1 | INTEGER {cdp(2), vtp(3), stp(4), eoam(5), lldp(6)} | not-accessible | current |
| cltcTunnelEncapStats OBJECT-TYPE The tunneled PDU encapsulation statistics of an interface. These statistics cover the number of tunneled ingress PDUs. | 1.3.6.1.4.1.9.9.246.1.5.1.1.2 | Counter32 | read-only | current |
| cltcTunnelDeEncapStats OBJECT-TYPE The tunneled PDU de-encapsulation statistics of an interface. These statistics cover the number of tunneled egress PDUs. | 1.3.6.1.4.1.9.9.246.1.5.1.1.3 | Counter32 | read-only | current |
| cltcTunnelDropStats OBJECT-TYPE The number of PDUs dropped on an interface for a given protocol. The PDUs will be dropped when the cltcTunnelDropThreshold is reached. | 1.3.6.1.4.1.9.9.246.1.5.1.1.4 | Counter32 | read-only | current |
| cltcTunnelDropStatTable OBJECT-TYPE This table contains protocol tunneling drop statistics. | 1.3.6.1.4.1.9.9.246.1.5.2 | not-accessible | current | |
| cltcTunnelDropStatEntry OBJECT-TYPE Drop statistics for a tunneled protocol. | 1.3.6.1.4.1.9.9.246.1.5.2.1 | not-accessible | current | |
| cltcTunnelTotalDropStats OBJECT-TYPE The number of tunneled ingress PDUs that have been dropped. | 1.3.6.1.4.1.9.9.246.1.5.2.1.1 | Counter32 | read-only | current |
| cltcDot1qAllTagged OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.1.6 | |||
| cltcDot1qAllTaggedEnabled OBJECT-TYPE This object controls if dot1q-all-tagged feature is enabled in the managed system. | 1.3.6.1.4.1.9.9.246.1.6.1 | TruthValue | read-write | current |
| cltcDot1qAllTaggedIfTable OBJECT-TYPE This table contains information about the dot1q-all-tagged feature's configuration of capable interfaces in the system. | 1.3.6.1.4.1.9.9.246.1.6.2 | not-accessible | current | |
| cltcDot1qAllTaggedIfEntry OBJECT-TYPE Configuration of dot1q-all-tagged feature on interfaces. Each entry is created for a dot1q-all-tagged capable interface in the system. | 1.3.6.1.4.1.9.9.246.1.6.2.1 | not-accessible | current | |
| cltcDot1qAllTaggedIfEnabled OBJECT-TYPE This object specifies whether dot1q-all-tagged feature has been enabled on a specific interface. | 1.3.6.1.4.1.9.9.246.1.6.2.1.1 | TruthValue | read-write | current |
| cltcMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.2 | |||
| cltcMIBNotificationsPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.2.0 | |||
| cltcMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.3 | |||
| cltcMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.3.1 | |||
| cltcMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.246.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cltcTunnelDropThresholdExceeded NOTIFICATION-TYPE This notification is generated when the cltcTunnelDropThreshold has been exceeded. | 1.3.6.1.4.1.9.9.246.2.0.1 | current |
| cltcTunnelShutdownThresholdExceeded NOTIFICATION-TYPE This notification is generated when the cltcTunnelShutdownThreshold has been exceeded. | 1.3.6.1.4.1.9.9.246.2.0.2 | current |
| cltcTunnelSysDropThresholdExceeded NOTIFICATION-TYPE This notification is generated when the cltcTunnelSysDropThreshold has been exceeded. | 1.3.6.1.4.1.9.9.246.2.0.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| cltcMIBCompliance MODULE-COMPLIANCE The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB. | 1.3.6.1.4.1.9.9.246.3.1.1 | deprecated |
| cltcMIBCompliance2 MODULE-COMPLIANCE The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB. | 1.3.6.1.4.1.9.9.246.3.1.2 | deprecated |
| cltcMIBCompliance3 MODULE-COMPLIANCE The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB. | 1.3.6.1.4.1.9.9.246.3.1.3 | deprecated |
| cltcMIBCompliance4 MODULE-COMPLIANCE The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB. | 1.3.6.1.4.1.9.9.246.3.1.4 | deprecated |
| cltcMIBCompliance5 MODULE-COMPLIANCE The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB. | 1.3.6.1.4.1.9.9.246.3.1.5 | current |
| cltcDot1qTunnelGroup OBJECT-GROUP A collection of objects for configuring dot1q tunnneling. | 1.3.6.1.4.1.9.9.246.3.2.1 | current |
| cltcTunneledProtocolGroup OBJECT-GROUP A collection of objects for configuring tunneled protocols. | 1.3.6.1.4.1.9.9.246.3.2.2 | current |
| cltcTunnelThresholdGroup OBJECT-GROUP A collection of objects for configuring the thresholds for protocol tunneling. | 1.3.6.1.4.1.9.9.246.3.2.3 | current |
| cltcTunnelStatisticsGroup OBJECT-GROUP A collection of objects which give the statistics regarding the tunneling interfaces. | 1.3.6.1.4.1.9.9.246.3.2.4 | current |
| cltcDot1qAllTaggedGroup OBJECT-GROUP A collection of objects for configuring the dot1q-all-tagged feature in the system. | 1.3.6.1.4.1.9.9.246.3.2.5 | current |
| cltcTunnelDropStatisticsGroup OBJECT-GROUP A collection of objects which give the statistics regarding dropped PDUs on the tunneling interfaces. | 1.3.6.1.4.1.9.9.246.3.2.6 | current |
| cltcNotifsEnableGroup OBJECT-GROUP A collections of objects used to enable notifications. | 1.3.6.1.4.1.9.9.246.3.2.7 | current |
| cltcTunnelThresholdNotifsGroup NOTIFICATION-GROUP A collection of notifications used for the tunnel thresholds. | 1.3.6.1.4.1.9.9.246.3.2.8 | current |
| cltcTunnelTotalDropGroup OBJECT-GROUP A collection of objects which give the statistics regarding total number of dropped PDUs per protocol type. | 1.3.6.1.4.1.9.9.246.3.2.9 | current |
| cltcTunnelSysDropNotifEnableGroup OBJECT-GROUP A collection of object to enable cltcTunnelSysDropThresholdExceeded notification. | 1.3.6.1.4.1.9.9.246.3.2.10 | current |
| cltcTunnelSysDropGroup OBJECT-GROUP A collection of object for configuring the system level rate limiting. | 1.3.6.1.4.1.9.9.246.3.2.11 | current |
| cltcTunnelSysDropNotifGroup NOTIFICATION-GROUP A collection of notification used for the system level rate limiting has been exceeded. | 1.3.6.1.4.1.9.9.246.3.2.12 | current |