MIBs Depot

RADLAN-MIB

Namespace
radlan
Source file
RADLAN-MIB
Digest
sha256:fc2aa2d63e24f717563eccde9694c3550486a7805572bb5d26793d85eaa8d397

Imports

FromSymbols
BRIDGE-MIBBridgeId, MacAddress, Timeout, dot1dBasePort, dot1dBasePortEntry
IEEE8021-PAE-MIBPaeControlledPortStatus, dot1xAuthSessionStatsEntry, dot1xPaePortNumber
IF-MIBInterfaceIndex, InterfaceIndexOrZero, ifIndex
P-BRIDGE-MIBEnabledStatus
Q-BRIDGE-MIBPortList, VlanIndex, dot1qFdbId
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso
SNMPv2-SMI-v1Counter-32, Integer-32, Unsigned-32
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION
SNMPv2-TC-v1DateAndTime, DisplayString, PhysAddress, RowPointer, RowStatus, TimeInterval, TruthValue

Imported by

29 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
IANAifType-MIB
IEEE8021-PAE-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RADLAN-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-SMI-v1
SNMPv2-TC
SNMPv2-TC-v1
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
NetNumber
type
Percents
type
RlStormCtrlRateUnit
type
VlanPriority
type

Objects

NameOIDSyntaxAccessStatus
rnd
OBJECT-IDENTITY
1.3.6.1.4.1.89
rndNotifications
OBJECT-IDENTITY
All the rnd notifications will reside under this branch as specified in RFC2578 'Structure of Management Information Version 2 (SMIv2)' 8.5
1.3.6.1.4.1.89.0current
rndMng
OBJECT-IDENTITY
1.3.6.1.4.1.89.1
rndDeviceParams
OBJECT-IDENTITY
1.3.6.1.4.1.89.2
rndBridgeType
OBJECT-TYPE
Identification of the RND bridge type.
1.3.6.1.4.1.89.2.1INTEGER {reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), tre(9), rtre(10), xtb(11), ete(12), rete(13), ielb(30), leb(31), openGate12(32), openGate4(33), ran(34), itlb(35), gatelinx(36), openGate2(37), ogRanTR(38), rdapter(39), ogVan(40), wanGate(41), ogRubE(42), ogRubT(43), wanGateI(44), vGate4(45), lre(46), mrt(47), vGate2(48)}read-onlymandatory
rndInactiveArpTimeOut
OBJECT-TYPE
This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
1.3.6.1.4.1.89.2.2INTEGERread-writemandatory
rndBridgeAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.3
rndErrorDesc
OBJECT-TYPE
A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
1.3.6.1.4.1.89.2.3.1DisplayStringread-onlymandatory
rndErrorSeverity
OBJECT-TYPE
The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
1.3.6.1.4.1.89.2.3.2INTEGER {info(0), warning(1), error(2), fatal-error(3)}read-onlymandatory
rndBrgVersion
OBJECT-TYPE
The bridge version.
1.3.6.1.4.1.89.2.4DisplayStringread-onlymandatory
rndBrgFeatures
OBJECT-TYPE
A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan bit7: PPP-Security Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server bit7: Check Connectivity bit8: WSD multiplexing Byte8 bit1: MRT3 bit2: WSD Redundancy bit3: DHCP Server bit4: WSD Connection Limit bit5: WSD Distributed System bit6: WSD Load Report bit7: WSD super farm bit8: RadWiz leased line Byte9 bit1: PPP IP address negotiaton bit2: DNS bit3: Nat bit4: WSD Static proximity bit5: WSD Dynamic proximity bit6: WSD Proxy bit7: WSD Proximity client bit8: MAC Load balancing Byte10 bit1: Unnum Inf bit2: Power Supply redundancy bit3: MRT PPP Compression bit4: ZHR Apolo bit5: Copy port bit6: UDP Relay 2.0 bit7: NVRAM bit8: URL table Byte11 bit1: URL super farm bit2: NAT on LAN bit3: Remote Con bit4: AP5000 bit5: Session tracking bit6: Mirroring bit7: Alias IP bit8: CSD Nat Byte12 bit1: content check bit2: mlb virtual ip bit3: reserved RadLan bit4: csd nat exception bit5: statistics monitor bit6: reserved-for-radware
1.3.6.1.4.1.89.2.5OCTET STRINGread-onlymandatory
rndBrgLicense
OBJECT-TYPE
This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
1.3.6.1.4.1.89.2.6OCTET STRINGread-writemandatory
rndIpHost
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.7
rndCommunityTable
OBJECT-TYPE
The community table of the agent
1.3.6.1.4.1.89.2.7.2not-accessiblemandatory
rndCommunityEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.2.7.2.1not-accessiblemandatory
rndCommunityMngStationAddr
OBJECT-TYPE
The management station that will be allowed to communicate with the agent IP address
1.3.6.1.4.1.89.2.7.2.1.1IpAddressread-writemandatory
rndCommunityString
OBJECT-TYPE
The community string with which the management station will communicate with the agent
1.3.6.1.4.1.89.2.7.2.1.2DisplayString (SIZE(1..20))read-writemandatory
rndCommunityAccess
OBJECT-TYPE
The allowed access to this management station
1.3.6.1.4.1.89.2.7.2.1.3INTEGER {readOnly(1), readWrite(2), super(3)}read-writemandatory
rndCommunityTrapsEnable
OBJECT-TYPE
Should the agent send traps to the management station, and what version is required
1.3.6.1.4.1.89.2.7.2.1.4INTEGER {snmpV1(1), snmpV2(2), snmpV3(3), trapsDisable(4)}read-writemandatory
rndCommunityStatus
OBJECT-TYPE
The status of this entry. If the status is invalid the community entry will be deleted
1.3.6.1.4.1.89.2.7.2.1.5INTEGER {enable(1), invalid(2)}read-writemandatory
rndCommunityPortSecurity
OBJECT-TYPE
If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device.
1.3.6.1.4.1.89.2.7.2.1.6INTEGER {enabled(1), disabled(2)}read-writemandatory
rndCommunityOwner
OBJECT-TYPE
The owner of this community
1.3.6.1.4.1.89.2.7.2.1.7DisplayString (SIZE(1..32))read-writemandatory
rndCommunityTrapDestPort
OBJECT-TYPE
The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA assigned port number for SNMP traps. This object is relevant only if rndCommunityTrapsEnable has a value different from trapsDisable.
1.3.6.1.4.1.89.2.7.2.1.8INTEGER (0..65535)read-writemandatory
rlMridTable
OBJECT-TYPE
The MRID related configurations table of the agent
1.3.6.1.4.1.89.2.7.3not-accessiblemandatory
rlMridEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.2.7.3.1not-accessiblemandatory
rlMridConnection
OBJECT-TYPE
The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry.
1.3.6.1.4.1.89.2.7.3.1.1INTEGERread-writemandatory
rlManagedMrid
OBJECT-TYPE
The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry
1.3.6.1.4.1.89.2.7.3.1.2INTEGERread-writemandatory
rndIpHostManagement
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.7.4
rndIpHostManagementSupported
OBJECT-TYPE
ifindex manage supported.
1.3.6.1.4.1.89.2.7.4.1TruthValueread-onlymandatory
rndIpHostManagementIfIndex
OBJECT-TYPE
if supported manage , indicate ifindex, if 0 thaen disable
1.3.6.1.4.1.89.2.7.4.2INTEGERread-writemandatory
rndManagedTime
OBJECT-TYPE
The time will be sent in the format hhmmss
1.3.6.1.4.1.89.2.8DisplayString (SIZE(6))read-writemandatory
rndManagedDate
OBJECT-TYPE
The date will be sent in the format ddmmyy
1.3.6.1.4.1.89.2.9DisplayString (SIZE(6))read-writemandatory
rndBaseBootVersion
OBJECT-TYPE
Defines the boot version of the product.
1.3.6.1.4.1.89.2.10DisplayStringread-onlymandatory
genGroup
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.11
genGroupHWVersion
OBJECT-TYPE
Defines the HW version of the product.
1.3.6.1.4.1.89.2.11.1DisplayStringread-onlymandatory
genGroupConfigurationSymbol
OBJECT-TYPE
Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
1.3.6.1.4.1.89.2.11.2DisplayString (SIZE(1))read-onlymandatory
genGroupHWStatus
OBJECT-TYPE
This attribute describes the status of the group hardware as detected by the sensors software.
1.3.6.1.4.1.89.2.11.3INTEGER {ok(1), hardwareProblems(2), notSupported(255)}read-onlymandatory
rndBasePhysicalAddress
OBJECT-TYPE
The Base physical (MAC) address of the device.
1.3.6.1.4.1.89.2.12PhysAddressread-onlymandatory
rndSoftwareFile
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.13
rndActiveSoftwareFileTable
OBJECT-TYPE
The (conceptual) table listing the active software file of the requested unit.
1.3.6.1.4.1.89.2.13.1not-accessiblemandatory
rndActiveSoftwareFileEntry
OBJECT-TYPE
An entry (conceptual row) in the rndActiveSoftwareFileTable.
1.3.6.1.4.1.89.2.13.1.1not-accessiblemandatory
rndUnitNumber
OBJECT-TYPE
The unit number (for stackable devices) or 1 for 'stand alone' device.
1.3.6.1.4.1.89.2.13.1.1.1INTEGERread-writemandatory
rndActiveSoftwareFile
OBJECT-TYPE
Indicates the current active software file, image1 or image2.
1.3.6.1.4.1.89.2.13.1.1.2INTEGER {image1(1), image2(2)}read-onlymandatory
rndActiveSoftwareFileAfterReset
OBJECT-TYPE
Indicates the software file that will be active after reset (image1 or image2). If an error occurred in the download process, resulting in the corruption of the single software file, The value 'invalidImage' will be returned. This value can not be set by the user.
1.3.6.1.4.1.89.2.13.1.1.3INTEGER {image1(1), image2(2), invalidImage(3)}read-writemandatory
rndImageSize
OBJECT-TYPE
Max number of sectors currently allocated for image(s).
1.3.6.1.4.1.89.2.14INTEGERread-onlymandatory
rndBackupConfigurationEnabled
OBJECT-TYPE
Specifies whether the device supports backup-config parameters in lcli commands.
1.3.6.1.4.1.89.2.15TruthValueread-onlymandatory
rndImageInfo
OBJECT-IDENTITY
1.3.6.1.4.1.89.2.16
rndImageInfoTable
OBJECT-TYPE
The table contains information about images.
1.3.6.1.4.1.89.2.16.1not-accessiblemandatory
rndImageInfoEntry
OBJECT-TYPE
An entry in the rndImageInfoTable.
1.3.6.1.4.1.89.2.16.1.1not-accessiblemandatory
rndStackUnitNumber
OBJECT-TYPE
The unit number (for stackable devices) or 1 for 'stand alone' device.
1.3.6.1.4.1.89.2.16.1.1.1INTEGERread-writemandatory
rndImage1Name
OBJECT-TYPE
Indicates the file name of image-1 in the system.
1.3.6.1.4.1.89.2.16.1.1.2DisplayStringread-onlymandatory
rndImage2Name
OBJECT-TYPE
Indicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' text
1.3.6.1.4.1.89.2.16.1.1.3DisplayStringread-onlymandatory
rndImage1Version
OBJECT-TYPE
Indicates the version of image-1 in the system.
1.3.6.1.4.1.89.2.16.1.1.4DisplayStringread-onlymandatory
rndImage2Version
OBJECT-TYPE
Indicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' text
1.3.6.1.4.1.89.2.16.1.1.5DisplayStringread-onlymandatory
rndImage1Date
OBJECT-TYPE
Indicates the compilation date of image-1 in the system.
1.3.6.1.4.1.89.2.16.1.1.6DisplayStringread-onlymandatory
rndImage2Date
OBJECT-TYPE
Indicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' text
1.3.6.1.4.1.89.2.16.1.1.7DisplayStringread-onlymandatory
rndImage1Time
OBJECT-TYPE
Indicates the compilation time of image-1 in the system.
1.3.6.1.4.1.89.2.16.1.1.8DisplayStringread-onlymandatory
rndImage2Time
OBJECT-TYPE
Indicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' text
1.3.6.1.4.1.89.2.16.1.1.9DisplayStringread-onlymandatory
rndBootP
OBJECT-IDENTITY
1.3.6.1.4.1.89.24
rndBootPServerAddress
OBJECT-TYPE
The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0.
1.3.6.1.4.1.89.24.1IpAddressread-writemandatory
rndBootPRelaySecThreshold
OBJECT-TYPE
BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first.
1.3.6.1.4.1.89.24.2INTEGERread-writemandatory
ipSpec
OBJECT-IDENTITY
1.3.6.1.4.1.89.26
rsTunning
OBJECT-IDENTITY
1.3.6.1.4.1.89.29
rndApplications
OBJECT-IDENTITY
1.3.6.1.4.1.89.35
rsUDP
OBJECT-IDENTITY
1.3.6.1.4.1.89.42
swInterfaces
OBJECT-IDENTITY
1.3.6.1.4.1.89.43
rlIPmulticast
OBJECT-IDENTITY
1.3.6.1.4.1.89.46
rlFFT
OBJECT-IDENTITY
1.3.6.1.4.1.89.47
vlan
OBJECT-IDENTITY
1.3.6.1.4.1.89.48
rlRmonControl
OBJECT-IDENTITY
1.3.6.1.4.1.89.49
rlBrgMacSwitch
OBJECT-IDENTITY
1.3.6.1.4.1.89.50
rlBrgMacSwVersion
OBJECT-TYPE
MIB's version, the current version is 2.
1.3.6.1.4.1.89.50.1INTEGERread-onlymandatory
rlBrgMacSwMaxTableNumber
OBJECT-TYPE
Maximum number of MAC Tables supported by the device.
1.3.6.1.4.1.89.50.2INTEGERread-onlymandatory
rlBrgMacSwDynamicTables
OBJECT-TYPE
Specifies whether the device supports port dynamic MAC tables.
1.3.6.1.4.1.89.50.3INTEGER {supported(1), unsupported(2)}read-onlymandatory
rlBrgMacSwOldEntryDeleteMode
OBJECT-TYPE
The method used to delete old unused entries refresh_flag: The high level sets a flag when it adds or updates an entry, the Switch clears the flag each time, when it learns the station once more. aging_flag: The high level clears a flag when it adds or updates an entry, the Switch sets the flag each time, when it learns the station once more. aging_time: The high level defines a timeout, the Switch sends a message to the high level each time when the station doesn't send messages during interval between timeout and 2*timeout. Boundaries: The Switch doesn't support any mechanism, and the high level uses two boundaries: red and yellow. When the number of entries exceeds the red boundary, the high level deletes the oldest entries.
1.3.6.1.4.1.89.50.5INTEGER {refreshFlag(1), agingFlag(2), agingTime(3), boundaries(4)}read-onlymandatory
rlBrgMacSwSpanningTree
OBJECT-TYPE
Specifies whether the device supports port the Spanning Tree Protocol.
1.3.6.1.4.1.89.50.6INTEGER {supported(1), unsupported(2)}read-onlymandatory
rlBrgMacSwKeyType
OBJECT-TYPE
Specified the used MAC Address Table kye format: macOnly: One global MAC Address Table per device (leaky VLANs). tagAndMac: MAC Address Table per each VLAN (strick VLANs).
1.3.6.1.4.1.89.50.7INTEGER {macOnly(1), tagAndMac(2)}read-onlymandatory
rlBrgMacSwYellowBoundary
OBJECT-TYPE
The yellow boundary.
1.3.6.1.4.1.89.50.8INTEGERread-writemandatory
rlBrgMacSwRedBoundary
OBJECT-TYPE
The yellow boundary.
1.3.6.1.4.1.89.50.9INTEGERread-writemandatory
rlBrgMacSwTrapEnable
OBJECT-TYPE
This variable indicates whether to create a SNMP trap if adding dynamic mac failed due to full hash chain.
1.3.6.1.4.1.89.50.10TruthValueread-writemandatory
rlBrgMacSwOperTrapCount
OBJECT-TYPE
This variable indicates the trap counter status (i.e. number of received MAC addresses since the last trap sent that haven't been inserted into the hash). It is relevant only when trap is enabled.
1.3.6.1.4.1.89.50.11INTEGERread-onlymandatory
rlBrgMacSwAdminTrapFrequency
OBJECT-TYPE
This variable indicates the minimal frequency (in seconds) of sending a trap. It is relevant only when trap is enabled.
1.3.6.1.4.1.89.50.12INTEGER (1..86400)read-writemandatory
rlExperience
OBJECT-IDENTITY
1.3.6.1.4.1.89.51
rlCli
OBJECT-IDENTITY
1.3.6.1.4.1.89.52
rlCliMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.52.1INTEGERread-onlymandatory
rlCliPassword
OBJECT-TYPE
CLI Password
1.3.6.1.4.1.89.52.2DisplayString (SIZE(0..20))read-writemandatory
rlCliTimer
OBJECT-TYPE
CLI Timer
1.3.6.1.4.1.89.52.3INTEGER (5..3600)read-writemandatory
rlCliFileEnable
OBJECT-TYPE
CLI File Enable/Disable
1.3.6.1.4.1.89.52.4TruthValueread-onlymandatory
rlCliFileEnableAfterReset
OBJECT-TYPE
CLI File Enable/Disable After Reset
1.3.6.1.4.1.89.52.5TruthValueread-writemandatory
rlPhysicalDescription
OBJECT-IDENTITY
1.3.6.1.4.1.89.53
rlIfInterfaces
OBJECT-IDENTITY
1.3.6.1.4.1.89.54
rlMacMulticast
OBJECT-IDENTITY
1.3.6.1.4.1.89.55
rlGalileo
OBJECT-IDENTITY
1.3.6.1.4.1.89.56
rlpBridgeMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.89.57
rldot1dPriority
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.1
rldot1dPriorityMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.57.1.1INTEGERread-onlymandatory
rldot1dPriorityPortGroupTable
OBJECT-TYPE
A list of PortGroupNumber for each port.
1.3.6.1.4.1.89.57.1.2not-accessiblemandatory
rldot1dPriorityPortGroupEntry
OBJECT-TYPE
All ports belonging to a same group have the same User Priority to Traffic Class mapping.
1.3.6.1.4.1.89.57.1.2.1not-accessiblemandatory
rldot1dPriorityPortGroupNumber
OBJECT-TYPE
A group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping.
1.3.6.1.4.1.89.57.1.2.1.1INTEGERread-onlymandatory
rldot1dStp
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.2
rldot1dStpMibVersion
OBJECT-TYPE
MIB's version, the current version is 2.
1.3.6.1.4.1.89.57.2.1INTEGERread-onlymandatory
rldot1dStpType
OBJECT-TYPE
Specifies whether the device supports Spanning Tree per device, or per group.
1.3.6.1.4.1.89.57.2.2INTEGER {perDevice(1), mstp(4)}read-onlymandatory
rldot1dStpEnable
OBJECT-TYPE
Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.
1.3.6.1.4.1.89.57.2.3TruthValueread-writemandatory
rldot1dStpPortMustBelongToVlan
OBJECT-TYPE
Specifies whether a port must belong to a VLAN in order to participate in the STP.
1.3.6.1.4.1.89.57.2.4TruthValueread-writemandatory
rldot1dStpExtendedPortNumberFormat
OBJECT-TYPE
Specifies whether the STP uses the extended port fnumber format.
1.3.6.1.4.1.89.57.2.5TruthValueread-writemandatory
rldot1dStpVlanTable
OBJECT-TYPE
A table that contains vlan-specific information for the Spanning Tree Protocol.
1.3.6.1.4.1.89.57.2.6not-accessiblemandatory
rldot1dStpVlanEntry
OBJECT-TYPE
A list of information maintained by every Vlan about the Spanning Tree Protocol state for that Vlan.
1.3.6.1.4.1.89.57.2.6.1not-accessiblemandatory
rldot1dStpVlan
OBJECT-TYPE
The Vlan index.
1.3.6.1.4.1.89.57.2.6.1.1INTEGERread-onlymandatory
rldot1dStpVlanEnable
OBJECT-TYPE
Specifies whether this vlan is STP enable or disable
1.3.6.1.4.1.89.57.2.6.1.2TruthValueread-writemandatory
rldot1dStpTimeSinceTopologyChange
OBJECT-TYPE
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
1.3.6.1.4.1.89.57.2.6.1.3TimeTicksread-onlymandatory
rldot1dStpTopChanges
OBJECT-TYPE
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.89.57.2.6.1.4Counterread-onlymandatory
rldot1dStpDesignatedRoot
OBJECT-TYPE
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
1.3.6.1.4.1.89.57.2.6.1.5BridgeIdread-onlymandatory
rldot1dStpRootCost
OBJECT-TYPE
The cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.89.57.2.6.1.6INTEGERread-onlymandatory
rldot1dStpRootPort
OBJECT-TYPE
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.89.57.2.6.1.7INTEGERread-onlymandatory
rldot1dStpMaxAge
OBJECT-TYPE
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.89.57.2.6.1.8Timeoutread-onlymandatory
rldot1dStpHelloTime
OBJECT-TYPE
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.89.57.2.6.1.9Timeoutread-onlymandatory
rldot1dStpHoldTime
OBJECT-TYPE
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
1.3.6.1.4.1.89.57.2.6.1.10INTEGERread-onlymandatory
rldot1dStpForwardDelay
OBJECT-TYPE
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
1.3.6.1.4.1.89.57.2.6.1.11Timeoutread-onlymandatory
rldot1dStpVlanPortTable
OBJECT-TYPE
A table that contains pair <vlan, port> specific information for the Spanning Tree Protocol.
1.3.6.1.4.1.89.57.2.7not-accessiblemandatory
rldot1dStpVlanPortEntry
OBJECT-TYPE
A list of information maintained by every pair <vlan, port> about the Spanning Tree Protocol state for that pair.
1.3.6.1.4.1.89.57.2.7.1not-accessiblemandatory
rldot1dStpVlanPortVlan
OBJECT-TYPE
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.2.7.1.1INTEGER (1..4095)read-onlymandatory
rldot1dStpVlanPortPort
OBJECT-TYPE
The port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.2.7.1.2INTEGER (1..4096)read-onlymandatory
rldot1dStpVlanPortPriority
OBJECT-TYPE
The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rldot1dStpVlanPort.
1.3.6.1.4.1.89.57.2.7.1.3INTEGER (0..255)read-writemandatory
rldot1dStpVlanPortState
OBJECT-TYPE
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
1.3.6.1.4.1.89.57.2.7.1.4INTEGER {disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)}read-onlymandatory
rldot1dStpVlanPortEnable
OBJECT-TYPE
The enabled/disabled status of the port.
1.3.6.1.4.1.89.57.2.7.1.5INTEGER {enabled(1), disabled(2)}read-writemandatory
rldot1dStpVlanPortPathCost
OBJECT-TYPE
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
1.3.6.1.4.1.89.57.2.7.1.6INTEGER (1..65535)read-writemandatory
rldot1dStpVlanPortDesignatedRoot
OBJECT-TYPE
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
1.3.6.1.4.1.89.57.2.7.1.7BridgeIdread-onlymandatory
rldot1dStpVlanPortDesignatedCost
OBJECT-TYPE
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.89.57.2.7.1.8INTEGERread-onlymandatory
rldot1dStpVlanPortDesignatedBridge
OBJECT-TYPE
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.89.57.2.7.1.9BridgeIdread-onlymandatory
rldot1dStpVlanPortDesignatedPort
OBJECT-TYPE
The Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.89.57.2.7.1.10OCTET STRING (SIZE(2))read-onlymandatory
rldot1dStpVlanPortForwardTransitions
OBJECT-TYPE
The number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.89.57.2.7.1.11Counterread-onlymandatory
rldot1dStpTrapVariable
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.2.8
rldot1dStpTrapVrblifIndex
OBJECT-TYPE
The ifIndex of port which STP status was changed
1.3.6.1.4.1.89.57.2.8.1InterfaceIndexread-onlymandatory
rldot1dStpTrapVrblVID
OBJECT-TYPE
The VID of VLAN to which the port belongs which STP status was changed
1.3.6.1.4.1.89.57.2.8.2INTEGERread-onlymandatory
rldot1dStpTypeAfterReset
OBJECT-TYPE
New mode of spaning tree supported by the device after the next reset.
1.3.6.1.4.1.89.57.2.9INTEGER {perDevice(1), mstp(4)}read-writemandatory
rldot1dStpMonitorTime
OBJECT-TYPE
Factor of hello-time during which a port is monotored to determine if it is stable.
1.3.6.1.4.1.89.57.2.10INTEGER (1..20)read-writemandatory
rldot1dStpBpduCount
OBJECT-TYPE
The number of bpdu that need to received for the link to be considered stable.
1.3.6.1.4.1.89.57.2.11INTEGER (1..60)read-writemandatory
rldot1dStpLastChanged
OBJECT-TYPE
The last time any object in this table was changed by SNMP or other local management means.
1.3.6.1.4.1.89.57.2.12TimeTicksread-onlymandatory
rldot1dStpPortTable
OBJECT-TYPE
A table that contains extended pair port specific information.
1.3.6.1.4.1.89.57.2.13not-accessiblemandatory
rldot1dStpPortEntry
OBJECT-TYPE
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
1.3.6.1.4.1.89.57.2.13.1not-accessiblemandatory
rldot1dStpPortPort
OBJECT-TYPE
The port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.2.13.1.1INTEGER (1..4096)read-onlymandatory
rldot1dStpPortDampEnable
OBJECT-TYPE
Specified if dampening is enabled on this port.
1.3.6.1.4.1.89.57.2.13.1.2TruthValueread-writemandatory
rldot1dStpPortDampStable
OBJECT-TYPE
Specified if the port is stable.
1.3.6.1.4.1.89.57.2.13.1.3TruthValueread-onlymandatory
rldot1dStpPortFilterBpdu
OBJECT-TYPE
Specified if this port should filter bpdus when stp is disabled.
1.3.6.1.4.1.89.57.2.13.1.4TruthValueread-writemandatory
rldot1dStpPortBpduSent
OBJECT-TYPE
Specified the number of bpdu sent from this port.
1.3.6.1.4.1.89.57.2.13.1.5Counter_32read-onlymandatory
rldot1dStpPortBpduReceived
OBJECT-TYPE
Specified the number of bpdu received in this port.
1.3.6.1.4.1.89.57.2.13.1.6Counter_32read-onlymandatory
rldot1dStpPortRole
OBJECT-TYPE
Specified the role of this this port.
1.3.6.1.4.1.89.57.2.13.1.7INTEGER {unknown(0), disabled(1), alternate(2), backup(3), root(4), designated(5)}read-onlymandatory
rldot1dStpBpduType
OBJECT-TYPE
Specified the type of BPDU transmitted by this port.
1.3.6.1.4.1.89.57.2.13.1.8INTEGER {stp(0), rstp(1)}read-onlymandatory
rldot1dStpPortRestrictedRole
OBJECT-TYPE
If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected.
1.3.6.1.4.1.89.57.2.13.1.9TruthValueread-writemandatory
rldot1dStpPortAutoEdgePort
OBJECT-TYPE
If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state.
1.3.6.1.4.1.89.57.2.13.1.10TruthValueread-writemandatory
rldot1dStpPortLoopback
OBJECT-TYPE
Specified loopback was detected on port.
1.3.6.1.4.1.89.57.2.13.1.11TruthValueread-onlymandatory
rldot1dStpPortsEnable
OBJECT-TYPE
Enable / Disable spanning tree on ports by default .
1.3.6.1.4.1.89.57.2.14TruthValueread-onlymandatory
rldot1dStpTaggedFlooding
OBJECT-TYPE
flooding can be done in tagged bpdu .
1.3.6.1.4.1.89.57.2.15TruthValueread-onlymandatory
rldot1dStpPortBelongToVlanDefault
OBJECT-TYPE
The default value of rldot1dStpPortMustBelongToVlan .
1.3.6.1.4.1.89.57.2.16TruthValueread-onlymandatory
rldot1dStpEnableByDefault
OBJECT-TYPE
The default value of rldot1dStpEnable .
1.3.6.1.4.1.89.57.2.17TruthValueread-onlymandatory
rldot1dStpPortToDefault
OBJECT-TYPE
To order port/s to revert to default setings .
1.3.6.1.4.1.89.57.2.18INTEGERread-writemandatory
rldot1dStpSupportedType
OBJECT-TYPE
The type of stp supported by the device.
1.3.6.1.4.1.89.57.2.19INTEGER {perDevice(1), perVlan(2), mstp(3)}read-onlymandatory
rldot1dStpEdgeportSupportInStp
OBJECT-TYPE
If EdgePort is supported in stpCompatible mode .
1.3.6.1.4.1.89.57.2.20TruthValueread-onlymandatory
rldot1dStpFilterBpdu
OBJECT-TYPE
Specified if the device should filter BPDUs when STP is disabled.
1.3.6.1.4.1.89.57.2.21TruthValueread-writemandatory
rldot1dStpFloodBpduMethod
OBJECT-TYPE
Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging.
1.3.6.1.4.1.89.57.2.22INTEGER {classic(0), bridging(1)}read-writemandatory
rldot1dStpSeparatedBridges
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.2.23
rldot1dStpSeparatedBridgesTable
OBJECT-TYPE
Define if separated bridges feature is enabled for each interface.
1.3.6.1.4.1.89.57.2.23.1not-accessiblemandatory
rldot1dStpSeparatedBridgesEntry
OBJECT-TYPE
Defines the contents of each line in the rlSeparatedBridgesTable table.
1.3.6.1.4.1.89.57.2.23.1.1not-accessiblemandatory
rldot1dStpSeparatedBridgesPortEnable
OBJECT-TYPE
This variable indicates whether the separated bridge feature is enabled on a specified ifIndex.
1.3.6.1.4.1.89.57.2.23.1.1.1TruthValueread-writemandatory
rldot1dStpSeparatedBridgesEnable
OBJECT-TYPE
Enable / Disable Separated Bridges Feature.
1.3.6.1.4.1.89.57.2.23.2TruthValueread-writemandatory
rldot1dStpSeparatedBridgesAutoConfig
OBJECT-TYPE
Enable / Disable Separated Bridges Automatic Configuration.
1.3.6.1.4.1.89.57.2.23.3TruthValueread-writemandatory
rldot1dStpPortBpduGuardTable
OBJECT-TYPE
A table that contains for each port whether it is bpdu guard .
1.3.6.1.4.1.89.57.2.24not-accessiblemandatory
rldot1dStpPortBpduGuardEntry
OBJECT-TYPE
A list of information maintained by every port whether it is bpdu guard.
1.3.6.1.4.1.89.57.2.24.1not-accessiblemandatory
rldot1dStpPortBpduGuardEnable
OBJECT-TYPE
Specified if bpdu guard is enabled on this port.
1.3.6.1.4.1.89.57.2.24.1.1TruthValueread-writemandatory
rldot1dExtBase
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.3
rldot1dExtBaseMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.57.3.1INTEGERread-onlymandatory
rldot1dDeviceCapabilities
OBJECT-TYPE
Indicates the optional parts of private extension of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.
1.3.6.1.4.1.89.57.3.2OCTET STRING (SIZE(1))read-onlymandatory
rldot1wRStp
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.4
rldot1wRStpVlanEdgePortTable
OBJECT-TYPE
A table that contains pair <vlan, port> specific information for the Rapid Spanning Tree Protocol.
1.3.6.1.4.1.89.57.4.1not-accessiblemandatory
rldot1wRStpVlanEdgePortEntry
OBJECT-TYPE
A list of information maintained by every pair <vlan, port> about the RAPID Spanning Tree Protocol state for that pair.
1.3.6.1.4.1.89.57.4.1.1not-accessiblemandatory
rldot1wRStpVlanEdgePortVlan
OBJECT-TYPE
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed.
1.3.6.1.4.1.89.57.4.1.1.1INTEGER (1..4095)read-onlymandatory
rldot1wRStpVlanEdgePortPort
OBJECT-TYPE
The port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.4.1.1.2INTEGERread-onlymandatory
rldot1wRStpEdgePortStatus
OBJECT-TYPE
Specifies whether this port is an Edge Port or not
1.3.6.1.4.1.89.57.4.1.1.3TruthValueread-writemandatory
rldot1wRStpForceVersionTable
OBJECT-TYPE
A table that contains <vlan> specific information for the Rapid Spanning Tree Protocol.
1.3.6.1.4.1.89.57.4.2not-accessiblemandatory
rldot1wRStpForceVersionEntry
OBJECT-TYPE
A list of information maintained by every <vlan> about the RAPID Spanning Tree Protocol state for that pair.
1.3.6.1.4.1.89.57.4.2.1not-accessiblemandatory
rldot1wRStpForceVersionVlan
OBJECT-TYPE
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed.
1.3.6.1.4.1.89.57.4.2.1.1INTEGER (1..4095)read-onlymandatory
rldot1wRStpForceVersionState
OBJECT-TYPE
Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP
1.3.6.1.4.1.89.57.4.2.1.2INTEGERread-writemandatory
rldot1pPriorityMap
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.5
rldot1pPriorityMapState
OBJECT-TYPE
enable / disable
1.3.6.1.4.1.89.57.5.1INTEGER {enable(1), disable(2)}read-writemandatory
rldot1pPriorityMapTable
OBJECT-TYPE
This table hold information the priority maps
1.3.6.1.4.1.89.57.5.2not-accessiblemandatory
rldot1pPriorityMapEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.57.5.2.1not-accessiblemandatory
rldot1pPriorityMapName
OBJECT-TYPE
The map name
1.3.6.1.4.1.89.57.5.2.1.1DisplayString (SIZE(1..25))read-onlymandatory
rldot1pPriorityMapPriority
OBJECT-TYPE
The map holding the queue
1.3.6.1.4.1.89.57.5.2.1.2OCTET STRING (SIZE(8))read-writemandatory
rldot1pPriorityMapPort
OBJECT-TYPE
the port that the map, is applied on in config
1.3.6.1.4.1.89.57.5.2.1.3PortListread-writemandatory
rldot1pPriorityMapPortList
OBJECT-TYPE
the ports that the map, is applied on in actual
1.3.6.1.4.1.89.57.5.2.1.4PortListread-onlymandatory
rldot1pPriorityMapStatus
OBJECT-TYPE
The status of the table entry. It's used to delete an entry
1.3.6.1.4.1.89.57.5.2.1.5RowStatusread-writemandatory
rldot1sMstp
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.6
rldot1sMstpInstanceTable
OBJECT-TYPE
A table that contains Mstp instance specific information for the Multiple Spanning Tree Protocol.
1.3.6.1.4.1.89.57.6.1not-accessiblemandatory
rldot1sMstpInstanceEntry
OBJECT-TYPE
A list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance.
1.3.6.1.4.1.89.57.6.1.1not-accessiblemandatory
rldot1sMstpInstanceId
OBJECT-TYPE
The Instance index.
1.3.6.1.4.1.89.57.6.1.1.1INTEGER (1..64)read-onlymandatory
rldot1sMstpInstanceEnable
OBJECT-TYPE
Specifies whether this Instance is STP enable or disable
1.3.6.1.4.1.89.57.6.1.1.2TruthValueread-onlymandatory
rldot1sMstpInstanceTimeSinceTopologyChange
OBJECT-TYPE
The time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance .
1.3.6.1.4.1.89.57.6.1.1.3TimeTicksread-onlymandatory
rldot1sMstpInstanceTopChanges
OBJECT-TYPE
The total number of topology changes detected by this Instance since the management entity was last reset or initialized.
1.3.6.1.4.1.89.57.6.1.1.4Counterread-onlymandatory
rldot1sMstpInstanceDesignatedRoot
OBJECT-TYPE
The bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
1.3.6.1.4.1.89.57.6.1.1.5BridgeIdread-onlymandatory
rldot1sMstpInstanceRootCost
OBJECT-TYPE
The cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.89.57.6.1.1.6INTEGERread-onlymandatory
rldot1sMstpInstanceRootPort
OBJECT-TYPE
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.89.57.6.1.1.7INTEGERread-onlymandatory
rldot1sMstpInstanceMaxAge
OBJECT-TYPE
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.89.57.6.1.1.8Timeoutread-onlymandatory
rldot1sMstpInstanceHelloTime
OBJECT-TYPE
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.89.57.6.1.1.9Timeoutread-onlymandatory
rldot1sMstpInstanceHoldTime
OBJECT-TYPE
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
1.3.6.1.4.1.89.57.6.1.1.10INTEGERread-onlymandatory
rldot1sMstpInstanceForwardDelay
OBJECT-TYPE
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
1.3.6.1.4.1.89.57.6.1.1.11Timeoutread-onlymandatory
rldot1sMstpInstancePriority
OBJECT-TYPE
The value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 4096. The next 12 bit are the msti id . The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
1.3.6.1.4.1.89.57.6.1.1.12INTEGER (0..61440)read-writemandatory
rldot1sMstpInstanceRemainingHopes
OBJECT-TYPE
This count value determines the amount of hopes the information transmited by this bridge on this instance can travel.
1.3.6.1.4.1.89.57.6.1.1.13INTEGERread-onlymandatory
rldot1sMstpInstancePortTable
OBJECT-TYPE
A table that contains pair <msti, port> specific information for the Spanning Tree Protocol.
1.3.6.1.4.1.89.57.6.2not-accessiblemandatory
rldot1sMstpInstancePortEntry
OBJECT-TYPE
A list of information maintained by every pair <msti, port> about the Spanning Tree Protocol state for that pair.
1.3.6.1.4.1.89.57.6.2.1not-accessiblemandatory
rldot1sMstpInstancePortMstiId
OBJECT-TYPE
The Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.6.2.1.1INTEGER (1..64)read-onlymandatory
rldot1sMstpInstancePortPort
OBJECT-TYPE
The port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.6.2.1.2INTEGER (1..4096)read-onlymandatory
rldot1sMstpInstancePortPriority
OBJECT-TYPE
The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a product of 16. The other octet of the Port ID is given by the value of rldot1dStpVlanGroupPort.
1.3.6.1.4.1.89.57.6.2.1.3INTEGER (0..240)read-writemandatory
rldot1sMstpInstancePortState
OBJECT-TYPE
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
1.3.6.1.4.1.89.57.6.2.1.4INTEGER {disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)}read-onlymandatory
rldot1sMstpInstancePortEnable
OBJECT-TYPE
The enabled/disabled status of the port.
1.3.6.1.4.1.89.57.6.2.1.5INTEGER {enabled(1), disabled(2)}read-onlymandatory
rldot1sMstpInstancePortPathCost
OBJECT-TYPE
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
1.3.6.1.4.1.89.57.6.2.1.6INTEGER (1..200000000)read-onlymandatory
rldot1sMstpInstancePortDesignatedRoot
OBJECT-TYPE
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
1.3.6.1.4.1.89.57.6.2.1.7BridgeIdread-onlymandatory
rldot1sMstpInstancePortDesignatedCost
OBJECT-TYPE
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.89.57.6.2.1.8INTEGERread-onlymandatory
rldot1sMstpInstancePortDesignatedBridge
OBJECT-TYPE
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.89.57.6.2.1.9BridgeIdread-onlymandatory
rldot1sMstpInstancePortDesignatedPort
OBJECT-TYPE
The Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.89.57.6.2.1.10OCTET STRING (SIZE(2))read-onlymandatory
rldot1sMstpInstancePortForwardTransitions
OBJECT-TYPE
The number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.89.57.6.2.1.11Counterread-onlymandatory
rldot1sMStpInstancePortAdminPathCost
OBJECT-TYPE
The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost.
1.3.6.1.4.1.89.57.6.2.1.12INTEGER (0..200000000)read-writemandatory
rldot1sMStpInstancePortRole
OBJECT-TYPE
Specify the role of this this port.
1.3.6.1.4.1.89.57.6.2.1.13INTEGER {unknown(0), disabled(1), alternate(2), backup(3), root(4), designated(5), master(6)}read-onlymandatory
rldot1sMstpMaxHopes
OBJECT-TYPE
Max number of hopes that an MST BPDU will travel inside a region.
1.3.6.1.4.1.89.57.6.3INTEGER (1..40)read-writemandatory
rldot1sMstpConfigurationName
OBJECT-TYPE
The active configuration name as will be caried in MST BPDU's.
1.3.6.1.4.1.89.57.6.4SnmpAdminStringread-onlymandatory
rldot1sMstpRevisionLevel
OBJECT-TYPE
The active revision level.
1.3.6.1.4.1.89.57.6.5INTEGER (0..65535)read-onlymandatory
rldot1sMstpVlanTable
OBJECT-TYPE
A table that contains information about the alocation of vlans to groups.
1.3.6.1.4.1.89.57.6.6not-accessiblemandatory
rldot1sMstpVlanEntry
OBJECT-TYPE
A list of information maintained by every vlan about the group it belongs to.
1.3.6.1.4.1.89.57.6.6.1not-accessiblemandatory
rldot1sMstpVlan
OBJECT-TYPE
The vlan number of the vlan for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.6.6.1.1INTEGER (1..4094)read-onlymandatory
rldot1sMstpGroup
OBJECT-TYPE
Specifid the active group number this vlan belonges to.
1.3.6.1.4.1.89.57.6.6.1.2INTEGER (0..64)read-onlymandatory
rldot1sMstpPendingGroup
OBJECT-TYPE
Specifid the pending group number this vlan belonges to.
1.3.6.1.4.1.89.57.6.6.1.3INTEGER (0..64)read-writemandatory
rldot1sMstpExtPortTable
OBJECT-TYPE
A table that contains MSTP information about ports of the CIST.
1.3.6.1.4.1.89.57.6.7not-accessiblemandatory
rldot1sMstpExtPortEntry
OBJECT-TYPE
A list of information maintained by every port of the CIST.
1.3.6.1.4.1.89.57.6.7.1not-accessiblemandatory
rldot1sMstpExtPortPort
OBJECT-TYPE
The port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.6.7.1.1INTEGER (1..4096)read-onlymandatory
rldot1sMstpExtPortInternalOperPathCost
OBJECT-TYPE
The contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
1.3.6.1.4.1.89.57.6.7.1.2INTEGER (1..200000000)read-onlymandatory
rldot1sMstpExtPortDesignatedRegionalRoot
OBJECT-TYPE
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
1.3.6.1.4.1.89.57.6.7.1.3BridgeIdread-onlymandatory
rldot1sMstpExtPortDesignatedRegionalCost
OBJECT-TYPE
The regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.89.57.6.7.1.4INTEGERread-onlymandatory
rldot1sMstpExtPortBoundary
OBJECT-TYPE
Indication if the port is conented to to a lan segment outside or inside the region.
1.3.6.1.4.1.89.57.6.7.1.5TruthValueread-onlymandatory
rldot1sMstpExtPortInternalAdminPathCost
OBJECT-TYPE
The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost.
1.3.6.1.4.1.89.57.6.7.1.6INTEGER (0..200000000)read-writemandatory
rldot1sMstpDesignatedMaxHopes
OBJECT-TYPE
Max number of hopes that an MST BPDU will travel inside a region.
1.3.6.1.4.1.89.57.6.8INTEGER (1..40)read-onlymandatory
rldot1sMstpRegionalRoot
OBJECT-TYPE
CIST Regional Root Identifier (13.16.4). The Bridge Identifier of the current CIST Regional Root.
1.3.6.1.4.1.89.57.6.9BridgeIdread-onlymandatory
rldot1sMstpRegionalRootCost
OBJECT-TYPE
The CIST path cost from the transmitting Bridge to the CIST Regional Root.
1.3.6.1.4.1.89.57.6.10INTEGERread-onlymandatory
rldot1sMstpPendingConfigurationName
OBJECT-TYPE
The pending configuration name.
1.3.6.1.4.1.89.57.6.11SnmpAdminString (SIZE(1..32))read-writemandatory
rldot1sMstpPendingRevisionLevel
OBJECT-TYPE
The pending revision level.
1.3.6.1.4.1.89.57.6.12INTEGER (0..65535)read-writemandatory
rldot1sMstpPendingAction
OBJECT-TYPE
The action to be done with the pending configuration. copyPendingActive - to copy the pending mst configuration to the active one. copyActivePending - to copy the active mst configuration to the pending one.
1.3.6.1.4.1.89.57.6.13INTEGER {copyPendingActive(1), copyActivePending(2)}read-writemandatory
rldot1sMstpRemainingHops
OBJECT-TYPE
This count value determines the amount of hops the information transmitted by this bridge can travel.
1.3.6.1.4.1.89.57.6.14INTEGERread-onlymandatory
rldot1dTpAgingTime
OBJECT-IDENTITY
1.3.6.1.4.1.89.57.7
rldot1dTpAgingTimeMin
OBJECT-TYPE
The min timeout period in seconds for aging out dynamically learned forwarding information.
1.3.6.1.4.1.89.57.7.1INTEGERread-onlymandatory
rldot1dTpAgingTimeMax
OBJECT-TYPE
The max timeout period in seconds for aging out dynamically learned forwarding information.
1.3.6.1.4.1.89.57.7.2INTEGERread-onlymandatory
rlTelnet
OBJECT-IDENTITY
1.3.6.1.4.1.89.58
rlTelnetMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.58.1INTEGERread-onlymandatory
rlTelnetPassword
OBJECT-TYPE
Telnet Password
1.3.6.1.4.1.89.58.2DisplayString (SIZE(0..20))read-writemandatory
rlTelnetTimeout
OBJECT-TYPE
The number of minutes after which the TCP connection is closed if no activity is detected from the Client
1.3.6.1.4.1.89.58.3INTEGER (0..65535)read-writemandatory
rlTelnetUsersTable
OBJECT-TYPE
This table hold information about current telnet sessions
1.3.6.1.4.1.89.58.4not-accessiblemandatory
rlTelnetUsersEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.58.4.1not-accessiblemandatory
rlTelnetSessionId
OBJECT-TYPE
Telnet Session ID
1.3.6.1.4.1.89.58.4.1.1INTEGERread-onlymandatory
rlTelnetSessionClientAddress
OBJECT-TYPE
Telnet Session Client IP address
1.3.6.1.4.1.89.58.4.1.2IpAddressread-onlymandatory
rlTelnetSessionLoginTime
OBJECT-TYPE
Telnet Session Login Time string
1.3.6.1.4.1.89.58.4.1.3DisplayStringread-onlymandatory
rlTelnetSessionStatus
OBJECT-TYPE
Telnet Session status. After status has been set to diconnect the sessions is closed and the matching entry is deleted from the table.
1.3.6.1.4.1.89.58.4.1.4INTEGER {connected(1), disconnect(2)}read-writemandatory
rlTelnetLoginBanner
OBJECT-TYPE
Telnet Login Banner. When telnet connection is established, the banner is the concatanation of this MIB and rlTelnetSecondLoginBanner.
1.3.6.1.4.1.89.58.5DisplayStringread-writemandatory
rlTelnetSecondLoginBanner
OBJECT-TYPE
Telnet Login Banner Extension. When telnet connection is established, the banner is the concatanation of rlTelnetLoginBanner and this MIB
1.3.6.1.4.1.89.58.6DisplayStringread-writemandatory
rlPolicy
OBJECT-IDENTITY
1.3.6.1.4.1.89.59
rlArpSpoofing
OBJECT-IDENTITY
1.3.6.1.4.1.89.60
rlArpSpoofingMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.60.1INTEGERread-onlymandatory
rlArpSpoofingTable
OBJECT-TYPE
A list of the ifIndexes, IP addresses and corresponding MAC addresses.
1.3.6.1.4.1.89.60.2not-accessiblemandatory
rlArpSpoofingEntry
OBJECT-TYPE
An entry of this table specifis ifIndex,IP Address and MAC address.
1.3.6.1.4.1.89.60.2.1not-accessiblemandatory
rlArpSpoofingIfIndex
OBJECT-TYPE
The physical interface for which this entry contains information.
1.3.6.1.4.1.89.60.2.1.1InterfaceIndexread-writemandatory
rlArpSpoofingLocalIpAddr
OBJECT-TYPE
Ip addres for which the device will send ARP reply (ARP spoofing).
1.3.6.1.4.1.89.60.2.1.2IpAddressread-writemandatory
rlArpSpoofingMacAddr
OBJECT-TYPE
MAC addres with which the device will send ARP reply. If the field is ommited or its value 0.0.0.0 the device will send with the interface's MAC address.
1.3.6.1.4.1.89.60.2.1.3PhysAddressread-writemandatory
rlArpSpoofingRemoteIpAddr
OBJECT-TYPE
Ip addres for which the device will send periodically ARP requests if its value differs from 0.0.0.0.
1.3.6.1.4.1.89.60.2.1.4IpAddressread-writemandatory
rlArpSpoofingOutPhysIfIndex
OBJECT-TYPE
The physical interface to which the device will send periodically ARP requests if its value differs from 0. If its value is 0 then ARP requests will send to all the VLAN's ports.
1.3.6.1.4.1.89.60.2.1.5InterfaceIndexOrZeroread-writemandatory
rlArpSpoofingStatus
OBJECT-TYPE
It is used to insert, update or delete an entry
1.3.6.1.4.1.89.60.2.1.6RowStatusread-writemandatory
rlMir
OBJECT-IDENTITY
1.3.6.1.4.1.89.61
rlMirMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.61.1INTEGERread-onlymandatory
rlMirMaxNumOfMRIsAfterReset
OBJECT-TYPE
The maximun instanses of IP Multi Instance Routers after the following reset.
1.3.6.1.4.1.89.61.2INTEGERread-writemandatory
rlMirMaxNumOfMRIs
OBJECT-TYPE
The maximun instanses of IP Multi Instance Routers.
1.3.6.1.4.1.89.61.3INTEGERread-onlymandatory
rlMirCurMriNum
OBJECT-TYPE
The number of the MRI of which MIB variables are treated at the same time by the SNMP agent.
1.3.6.1.4.1.89.61.4INTEGERread-writemandatory
rlMirInterfaceTable
OBJECT-TYPE
A list of the assignment ifinterfaces to IP Router instances.
1.3.6.1.4.1.89.61.5not-accessiblemandatory
rlMirInterfaceEntry
OBJECT-TYPE
An entry of this table specifies the MRID assignement to a L2 interfrace.
1.3.6.1.4.1.89.61.5.1not-accessiblemandatory
rlMirInterfaceIfIndex
OBJECT-TYPE
The L2 interface for which this entry contains information.
1.3.6.1.4.1.89.61.5.1.1InterfaceIndexread-writemandatory
rlMirInterfaceMrid
OBJECT-TYPE
Multi IP Router Instance Identifier to which the interface is assgned.
1.3.6.1.4.1.89.61.5.1.2INTEGERread-writemandatory
rlMirVlanBaseReservedPortsTable
OBJECT-TYPE
A list VLAN based reserved physical ports.
1.3.6.1.4.1.89.61.6not-accessiblemandatory
rlMirVlanBaseReservedPortsEntry
OBJECT-TYPE
A VLAN based reserved physical port.
1.3.6.1.4.1.89.61.6.1not-accessiblemandatory
rlMirVlanBaseReservedPortsIfIndex
OBJECT-TYPE
IfIndex of VLAN based reserved physical port.
1.3.6.1.4.1.89.61.6.1.1InterfaceIndexread-writemandatory
rlMirVlanBaseReservedPortsStatus
OBJECT-TYPE
It is used to delete an entry
1.3.6.1.4.1.89.61.6.1.2RowStatusread-writemandatory
rlMirVlanBaseLogicalPortsTable
OBJECT-TYPE
A list VLAN based logical ports.
1.3.6.1.4.1.89.61.7not-accessiblemandatory
rlMirVlanBaseLogicalPortsEntry
OBJECT-TYPE
A VLAN based logical point-to-point port.
1.3.6.1.4.1.89.61.7.1not-accessiblemandatory
rlMirVlanBaseLogicalPortsIfIndex
OBJECT-TYPE
IfIndex of VLAN based Logical point-to-point port.
1.3.6.1.4.1.89.61.7.1.1InterfaceIndexread-writemandatory
rlMirVlanBaseLogicalPortsReservedIfIndex
OBJECT-TYPE
IfIndex of VLAN based reserved physical port on which the logical port is defined.
1.3.6.1.4.1.89.61.7.1.2InterfaceIndexread-writemandatory
rlMirVlanBaseLogicalPortsVlanTag
OBJECT-TYPE
VLAN tag.
1.3.6.1.4.1.89.61.7.1.3INTEGER (1..4095)read-writemandatory
rlMirVlanBaseLogicalPortsStatus
OBJECT-TYPE
It is used to add, update and delete an entry
1.3.6.1.4.1.89.61.7.1.4RowStatusread-writemandatory
rlIpMRouteStdMIB
OBJECT-IDENTITY
1.3.6.1.4.1.89.62
rl3sw2swTables
OBJECT-IDENTITY
1.3.6.1.4.1.89.63
rl3sw2swTablesPollingInterval
OBJECT-TYPE
The polling interval for dynamic 3SW/2SW tables in seconds.
1.3.6.1.4.1.89.63.1INTEGERread-writemandatory
rlGvrp
OBJECT-IDENTITY
1.3.6.1.4.1.89.64
rlPortGvrpTimersTable
OBJECT-TYPE
A table of GVRP timer values for every bridge port. This is indexed by dot1dBasePort.
1.3.6.1.4.1.89.64.1not-accessiblemandatory
rlPortGvrpTimersEntry
OBJECT-TYPE
GVRP timer values for a bridge port.
1.3.6.1.4.1.89.64.1.1not-accessiblemandatory
rlPortGvrpJoinTime
OBJECT-TYPE
The GVRP Join time, in centiseconds.
1.3.6.1.4.1.89.64.1.1.1TimeIntervalread-writemandatory
rlPortGvrpLeaveTime
OBJECT-TYPE
The GVRP Leave time, in centiseconds.
1.3.6.1.4.1.89.64.1.1.2TimeIntervalread-writemandatory
rlPortGvrpLeaveAllTime
OBJECT-TYPE
The GVRP LeaveAll time, in centiseconds.
1.3.6.1.4.1.89.64.1.1.3TimeIntervalread-writemandatory
rlPortGvrpOverrideGarp
OBJECT-TYPE
If enabled{1}, GVRP timer values for this port are determined by the values in this entry. Otherwise, they are determined by the values in dot1dPortGarpTable.
1.3.6.1.4.1.89.64.1.1.4EnabledStatusread-writemandatory
rlGvrpSupported
OBJECT-TYPE
Is GVRP supported in this device or not
1.3.6.1.4.1.89.64.2TruthValueread-onlymandatory
rlGvrpMibVersion
OBJECT-TYPE
MIB's version, the current version is 3.
1.3.6.1.4.1.89.64.3INTEGERread-onlymandatory
rlPortGvrpStatisticsTable
OBJECT-TYPE
A table of GVRP statistics values for every bridge port. This is indexed by dot1dBasePort.
1.3.6.1.4.1.89.64.4not-accessiblemandatory
rlPortGvrpStatisticsEntry
OBJECT-TYPE
GVRP statistics values for a bridge port.
1.3.6.1.4.1.89.64.4.1not-accessiblemandatory
rlPortGvrpStatisticsRJE
OBJECT-TYPE
The number of Join Empty Received on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.1Counterread-onlymandatory
rlPortGvrpStatisticsRJIn
OBJECT-TYPE
The number of Join In Received on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.2Counterread-onlymandatory
rlPortGvrpStatisticsREmp
OBJECT-TYPE
The number of Empty Received on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.3Counterread-onlymandatory
rlPortGvrpStatisticsRLIn
OBJECT-TYPE
The number of Leave In Received on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.4Counterread-onlymandatory
rlPortGvrpStatisticsRLE
OBJECT-TYPE
The number of Leave Empty Received on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.5Counterread-onlymandatory
rlPortGvrpStatisticsRLA
OBJECT-TYPE
The number of Leave All Received on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.6Counterread-onlymandatory
rlPortGvrpStatisticsSJE
OBJECT-TYPE
The number of Join Empty Sent on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.7Counterread-onlymandatory
rlPortGvrpStatisticsSJIn
OBJECT-TYPE
The number of Join In Sent on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.8Counterread-onlymandatory
rlPortGvrpStatisticsSEmp
OBJECT-TYPE
The number of Empty Sent on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.9Counterread-onlymandatory
rlPortGvrpStatisticsSLIn
OBJECT-TYPE
The number of Leave In Sent on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.10Counterread-onlymandatory
rlPortGvrpStatisticsSLE
OBJECT-TYPE
The number of Leave Empty Sent on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.11Counterread-onlymandatory
rlPortGvrpStatisticsSLA
OBJECT-TYPE
The number of Leave All Sent on the port, since the last clearance.
1.3.6.1.4.1.89.64.4.1.12Counterread-onlymandatory
rlPortGvrpStatisticsClear
OBJECT-TYPE
activate - the signal/trigger to clear ALL the rlPortGvrpStatisticsEntry's fields. passive - specify that the rlPortGvrpStatisticsClear field is not activate, or finshed the clearnce process. the rlPortGvrpStatisticsClear return automatically to passive after it was activate.
1.3.6.1.4.1.89.64.4.1.13INTEGER {activate(1), passive(2)}read-writemandatory
rlPortGvrpErrorStatisticsTable
OBJECT-TYPE
A table of GVRP ErrorStatistics values for every bridge port. This is indexed by dot1dBasePort.
1.3.6.1.4.1.89.64.5not-accessiblemandatory
rlPortGvrpErrorStatisticsEntry
OBJECT-TYPE
GVRP ErrorStatistics values for a bridge port.
1.3.6.1.4.1.89.64.5.1not-accessiblemandatory
rlPortGvrpErrorStatisticsInvProt
OBJECT-TYPE
The number of Invalid Protocol Id encountered by the GVRP port. (since the last clearance)
1.3.6.1.4.1.89.64.5.1.1Counterread-onlymandatory
rlPortGvrpErrorStatisticsInvAtyp
OBJECT-TYPE
The number of Invalid Attribute Type encountered by the GVRP port. (since the last clearance)
1.3.6.1.4.1.89.64.5.1.2Counterread-onlymandatory
rlPortGvrpErrorStatisticsInvAval
OBJECT-TYPE
The number of Invalid Attribute Value encountered by the GVRP port. (since the last clearance)
1.3.6.1.4.1.89.64.5.1.3Counterread-onlymandatory
rlPortGvrpErrorStatisticsInvPlen
OBJECT-TYPE
The number of Invalid PDU Length encountered by the GVRP port. (since the last clearance)
1.3.6.1.4.1.89.64.5.1.4Counterread-onlymandatory
rlPortGvrpErrorStatisticsInvAlen
OBJECT-TYPE
The number of Invalid Attribute Length encountered by the GVRP port. (since the last clearance)
1.3.6.1.4.1.89.64.5.1.5Counterread-onlymandatory
rlPortGvrpErrorStatisticsInvEvent
OBJECT-TYPE
The number of Invalid Event encountered by the GVRP port. (since the last clearance)
1.3.6.1.4.1.89.64.5.1.6Counterread-onlymandatory
rlPortGvrpErrorStatisticsClear
OBJECT-TYPE
activate - the signal/trigger to clear ALL the rlPortGvrpErrorStatisticsEntry's fields. passive - specify that the rlPortGvrpErrorStatisticsClear field is not activate, or finshed the clearnce process. the rlPortGvrpErrorStatisticsClear return automatically to passive after it was activate.
1.3.6.1.4.1.89.64.5.1.7INTEGER {activate(1), passive(2)}read-writemandatory
rlPortGvrpApplicantStatusTable
OBJECT-TYPE
A table of GVRP Applicant Status values for every bridge port. This is indexed by dot1dBasePort.
1.3.6.1.4.1.89.64.6not-accessiblemandatory
rlPortGvrpApplicantStatusEntry
OBJECT-TYPE
GVRP Applicant Status value for a bridge port.
1.3.6.1.4.1.89.64.6.1not-accessiblemandatory
rlPortGvrpApplicantStatusValue
OBJECT-TYPE
participant - the Gvrp enabled port sending GARP PDUs. nonParticipant - preventing the Gvrp enabled port from sending GARP PDUs.
1.3.6.1.4.1.89.64.6.1.1INTEGER {participant(1), nonParticipant(2)}read-writemandatory
rlPortGvrpRegistrationModeTable
OBJECT-TYPE
A table of GVRP Registration Mode values for every bridge port. This is indexed by dot1dBasePort.
1.3.6.1.4.1.89.64.8not-accessiblemandatory
rlPortGvrpRegistrationModeEntry
OBJECT-TYPE
GVRP Registration Mode value for a bridge port.
1.3.6.1.4.1.89.64.8.1not-accessiblemandatory
rlPortGvrpRegistrationModeForbidden
OBJECT-TYPE
true - deregisters all VLANS on the specified port and prevents any VLAN creation or registration on that port. false - the registration operation on this port behaves normally.
1.3.6.1.4.1.89.64.8.1.1TruthValueread-writemandatory
rlDot3adAgg
OBJECT-IDENTITY
1.3.6.1.4.1.89.65
rlEmbWeb
OBJECT-IDENTITY
1.3.6.1.4.1.89.66
rlSwPackageVersion
OBJECT-IDENTITY
1.3.6.1.4.1.89.67
rlSwPackageVersionTable
OBJECT-TYPE
The table listing the current versions of packages that are included in the running software.
1.3.6.1.4.1.89.67.1not-accessiblemandatory
rlSwPackageVersionEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.67.1.1not-accessiblemandatory
rlSwPackageVersionName
OBJECT-TYPE
The Package name.
1.3.6.1.4.1.89.67.1.1.1DisplayString (SIZE(1..20))read-onlymandatory
rlSwPackageVersionVesrion
OBJECT-TYPE
The Package version.
1.3.6.1.4.1.89.67.1.1.2DisplayString (SIZE(1..20))read-onlymandatory
rlBroadcom
OBJECT-IDENTITY
1.3.6.1.4.1.89.68
rlMultiSessionTerminal
OBJECT-IDENTITY
1.3.6.1.4.1.89.69
rlTerminalDebugModePassword
OBJECT-TYPE
When a user wants to change the terminal mode from debug mode to ASCII he must enter this password first
1.3.6.1.4.1.89.69.1DisplayString (SIZE(0..20))read-writemandatory
rlRCli
OBJECT-IDENTITY
1.3.6.1.4.1.89.70
rlRCliMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.70.1INTEGERread-onlymandatory
rlRCliUserPassword
OBJECT-TYPE
RCLI User mode Password
1.3.6.1.4.1.89.70.2OCTET STRING (SIZE(0..32))read-writemandatory
rlRCliEnablePassword
OBJECT-TYPE
RCLI Enable mode Password
1.3.6.1.4.1.89.70.3OCTET STRING (SIZE(0..32))read-writemandatory
rlRCliConfigPassword
OBJECT-TYPE
RCLI Config mode Password
1.3.6.1.4.1.89.70.4OCTET STRING (SIZE(0..32))read-writemandatory
rlRCliTimer
OBJECT-TYPE
RCLI Timeout
1.3.6.1.4.1.89.70.5INTEGER (5..3600)read-writemandatory
rlRcliFileAction
OBJECT-TYPE
RCLI Configuration File action determines whether The device configuration after reset will be set by the configuration file content or not.
1.3.6.1.4.1.89.70.6INTEGER {notUsedAfterReset(1), usedAfterReset(2)}read-writemandatory
rlBgp
OBJECT-IDENTITY
1.3.6.1.4.1.89.71
rlAgentsCapabilitiesGroups
OBJECT-IDENTITY
1.3.6.1.4.1.89.72
rlAggregateVlan
OBJECT-IDENTITY
1.3.6.1.4.1.89.73
rlAggregateVlanMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.73.1INTEGERread-onlymandatory
rlAggregateVlanTable
OBJECT-TYPE
The table creates an aggregateVlans, the IfIndex is from 10000
1.3.6.1.4.1.89.73.2not-accessiblemandatory
rlAggregateVlanEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.73.2.1not-accessiblemandatory
rlAggregateVlanIndex
OBJECT-TYPE
This index indicate the aggrigateVlan id, the aggregate vlan index is starting from 10000
1.3.6.1.4.1.89.73.2.1.1InterfaceIndexnot-accessiblemandatory
rlAggregateVlanName
OBJECT-TYPE
The name of the aggregateVlan
1.3.6.1.4.1.89.73.2.1.2DisplayString (SIZE(0..32))read-writemandatory
rlAggregateVlanPhysAddressType
OBJECT-TYPE
This variable indicates whether the physical address assigned to this VLAN should be the default one or be chosen from the set of reserved physical addresses of the device.
1.3.6.1.4.1.89.73.2.1.3INTEGER {default(1), reserve(2)}read-writemandatory
rlAggregateVlanStatus
OBJECT-TYPE
The status of the aggregateVlan table entry. It's used to delete an entry
1.3.6.1.4.1.89.73.2.1.4RowStatusread-writemandatory
rlAggregateSubVlanTable
OBJECT-TYPE
The table indicates all the allocated sub-vlans to the aggregateVlans, an entry in the rlAggregateVlanTable must be exist before allocating the subVlans
1.3.6.1.4.1.89.73.3not-accessiblemandatory
rlAggregateSubVlanEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.73.3.1not-accessiblemandatory
rlAggregateSubVlanIfIndex
OBJECT-TYPE
Indicate the subVlan that allocated to the aggregate vlan
1.3.6.1.4.1.89.73.3.1.1InterfaceIndexread-onlymandatory
rlAggregateSubVlanStatus
OBJECT-TYPE
The status of the aggregateSubVlan table entry. It's used to delete an entry
1.3.6.1.4.1.89.73.3.1.2RowStatusread-writemandatory
rlAggregateVlanArpProxy
OBJECT-TYPE
When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on different sub-vlans, which belong to the same Super VLAN.The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
1.3.6.1.4.1.89.73.4INTEGER {enable(1), disable(2)}read-writemandatory
rlGmrp
OBJECT-IDENTITY
1.3.6.1.4.1.89.75
rlGmrpSupported
OBJECT-TYPE
Is Gmrp supported in the device or not.
1.3.6.1.4.1.89.75.1TruthValueread-onlymandatory
rlGmrpMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.75.2INTEGERread-onlymandatory
rlPortGmrpTimersTable
OBJECT-TYPE
A table of Gmrp timer values for every bridge port. This is indexed by dot1dBasePort.
1.3.6.1.4.1.89.75.3not-accessiblemandatory
rlPortGmrpTimersEntry
OBJECT-TYPE
Gmrp timer values for a bridge port.
1.3.6.1.4.1.89.75.3.1not-accessiblemandatory
rlPortGmrpJoinTime
OBJECT-TYPE
The Gmrp Join time, in centiseconds.
1.3.6.1.4.1.89.75.3.1.1TimeIntervalread-writemandatory
rlPortGmrpLeaveTime
OBJECT-TYPE
The Gmrp Leave time, in centiseconds.
1.3.6.1.4.1.89.75.3.1.2TimeIntervalread-writemandatory
rlPortGmrpLeaveAllTime
OBJECT-TYPE
The Gmrp LeaveAll time, in centiseconds.
1.3.6.1.4.1.89.75.3.1.3TimeIntervalread-writemandatory
rlPortGmrpOverrideGarp
OBJECT-TYPE
If enabled{1}, Gmrp timer values for this port are determined by the values in this entry. Otherwise, they are determined by the values in dot1dPortGarpTable.
1.3.6.1.4.1.89.75.3.1.4EnabledStatusread-writemandatory
rlGmrpVlanTable
OBJECT-TYPE
This table is to Enable/Disable Gmrp in the vlan.
1.3.6.1.4.1.89.75.4not-accessiblemandatory
rlGmrpVlanEntry
OBJECT-TYPE
An entry in the rlGmrpVlanTable.
1.3.6.1.4.1.89.75.4.1not-accessiblemandatory
rlGmrpVlanTag
OBJECT-TYPE
The tag of the VLAN for which this entry contains information.
1.3.6.1.4.1.89.75.4.1.1INTEGERread-onlymandatory
rlGmrpVlanEnable
OBJECT-TYPE
Enable/Disable Gmrp in the vlan.
1.3.6.1.4.1.89.75.4.1.2TruthValueread-writemandatory
rlDhcpCl
OBJECT-IDENTITY
1.3.6.1.4.1.89.76
rlDhcpClActionTable
OBJECT-TYPE
The (conceptual) table mentione IP address which must be released/renewed on the interface.
1.3.6.1.4.1.89.76.3not-accessiblemandatory
rlDhcpClActionEntry
OBJECT-TYPE
An entry (conceptual row) in dhcpClActionTable.
1.3.6.1.4.1.89.76.3.1not-accessiblemandatory
rlDhcpClActionIfIndex
OBJECT-TYPE
The interface which the action is implemented for or NULL if it implemented for all device.
1.3.6.1.4.1.89.76.3.1.1InterfaceIndexread-onlymandatory
rlDhcpClActionStatus
OBJECT-TYPE
The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
1.3.6.1.4.1.89.76.3.1.2RowStatusread-writemandatory
rlDhcpClActionHostName
OBJECT-TYPE
This option specifies the name of the client.
1.3.6.1.4.1.89.76.3.1.3SnmpAdminString (SIZE(0..20))read-writemandatory
rlDhcpApprovalEnabled
OBJECT-TYPE
DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
1.3.6.1.4.1.89.76.4TruthValueread-onlymandatory
rlDhcpApprovalWaitingTable
OBJECT-TYPE
IP addresses waiting for approval.
1.3.6.1.4.1.89.76.5not-accessiblemandatory
rlDhcpApprovalWaitingEntry
OBJECT-TYPE
An entry in rlDhcpApprovalWaitingTable.
1.3.6.1.4.1.89.76.5.1not-accessiblemandatory
rlDhcpApprovalWaitingIfIndex
OBJECT-TYPE
IP interface ifIndex.
1.3.6.1.4.1.89.76.5.1.1InterfaceIndexread-onlymandatory
rlDhcpApprovalWaitingAddress
OBJECT-TYPE
IP Address waiting for approval.
1.3.6.1.4.1.89.76.5.1.2IpAddressread-onlymandatory
rlDhcpApprovalWaitingMask
OBJECT-TYPE
Mask waiting for approval.
1.3.6.1.4.1.89.76.5.1.3IpAddressread-onlymandatory
rlDhcpApprovalWaitingGateway
OBJECT-TYPE
Default gateway of received address.
1.3.6.1.4.1.89.76.5.1.4IpAddressread-onlymandatory
rlDhcpApprovalActionTable
OBJECT-TYPE
Action for waiting ip address (approve/decline).
1.3.6.1.4.1.89.76.6not-accessiblemandatory
rlDhcpApprovalActionEntry
OBJECT-TYPE
An entry in rlDhcpApprovalActionTable.
1.3.6.1.4.1.89.76.6.1not-accessiblemandatory
rlDhcpApprovalActionIfIndex
OBJECT-TYPE
IP interface ifIndex.
1.3.6.1.4.1.89.76.6.1.1InterfaceIndexread-onlymandatory
rlDhcpApprovalActionAddress
OBJECT-TYPE
IP Address.
1.3.6.1.4.1.89.76.6.1.2IpAddressread-onlymandatory
rlDhcpApprovalActionMask
OBJECT-TYPE
IP Address mask.
1.3.6.1.4.1.89.76.6.1.3IpAddressread-onlymandatory
rlDhcpApprovalActionApprove
OBJECT-TYPE
Approve or decline ip address.
1.3.6.1.4.1.89.76.6.1.4TruthValueread-writemandatory
rlDhcpClCommandTable
OBJECT-TYPE
Action MIB for DHCP Renew command.
1.3.6.1.4.1.89.76.7read-onlymandatory
rlDhcpClCommandEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.76.7.1not-accessiblemandatory
rlDhcpClCommandAction
OBJECT-TYPE
Action to apply.
1.3.6.1.4.1.89.76.7.1.2INTEGER {none(0), renew(1)}read-writemandatory
rlStormCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.89.77
rlStormCtrlSupport
OBJECT-TYPE
Identify if the strom control protection is supported
1.3.6.1.4.1.89.77.1TruthValueread-onlymandatory
rlStormCtrlMibVersion
OBJECT-TYPE
MIB's version, the current version is 3.
1.3.6.1.4.1.89.77.2INTEGERread-onlymandatory
rlStormCtrlRateUnitTypeSupport
OBJECT-TYPE
the supported rate unit type for the storm rate control
1.3.6.1.4.1.89.77.3OCTET STRING (SIZE(1))read-onlymandatory
rlStormCtrlTypeSupport
OBJECT-TYPE
the supported frame type for the storm control protection
1.3.6.1.4.1.89.77.4OCTET STRING (SIZE(1))read-onlymandatory
rlStormCtrlRateSupportPerType
OBJECT-TYPE
identify if rate control is supported for each frame type
1.3.6.1.4.1.89.77.5OCTET STRING (SIZE(1))read-onlymandatory
rlStormCtrlEnbaleDependencyBetweenTypes
OBJECT-TYPE
indicate enable limitation of dependency between frame types, such as enabling of multicast should be with the enabling of broadcast type (bcm 5632)
1.3.6.1.4.1.89.77.6OCTET STRING (SIZE(1))read-onlymandatory
rlStormCtrlRateDependencyBetweenTypes
OBJECT-TYPE
indicate limitation of dependency between frame types for rate assignment, for example: assigning of rate limit for unicast frame must assigning the same rate for multicast and bradcast frame (bcm 5615), in case the device support enbale per each frame type but with the same rate limitation.
1.3.6.1.4.1.89.77.7OCTET STRING (SIZE(1))read-onlymandatory
rlStormCtrlTable
OBJECT-TYPE
The table contains the storm control protection per port
1.3.6.1.4.1.89.77.8not-accessiblemandatory
rlStormCtrlEntry
OBJECT-TYPE
storm control protection, defined per port,frame type and rate
1.3.6.1.4.1.89.77.8.1not-accessiblemandatory
rlStormCtrlRateType
OBJECT-TYPE
indicate the rate unit type
1.3.6.1.4.1.89.77.8.1.1RlStormCtrlRateUnitread-writemandatory
rlStormCtrlUnknownUnicastEnable
OBJECT-TYPE
enable or disable the storm control for unknown unicast frames
1.3.6.1.4.1.89.77.8.1.2TruthValueread-writemandatory
rlStormCtrlUnknownUnicastRate
OBJECT-TYPE
set the storm control rate limit for the unknown unicast frames, 0 indicate blocking of frames from this type.
1.3.6.1.4.1.89.77.8.1.3Unsigned_32read-writemandatory
rlStormCtrlUnknownMulticastEnable
OBJECT-TYPE
enable or disable the storm control for unknown multicast frames
1.3.6.1.4.1.89.77.8.1.4TruthValueread-writemandatory
rlStormCtrlUnknownMulticastRate
OBJECT-TYPE
set the storm control rate limit for the unknown multicast frames, 0 indicate blocking of frames from this type.
1.3.6.1.4.1.89.77.8.1.5Unsigned_32read-writemandatory
rlStormCtrlBroadcastEnable
OBJECT-TYPE
enable or disable the storm control for Broadcast frames
1.3.6.1.4.1.89.77.8.1.6TruthValueread-writemandatory
rlStormCtrlBroadcastRate
OBJECT-TYPE
set the storm control rate limit for the Broadcast frames, 0 indicate blocking of frames from this type.
1.3.6.1.4.1.89.77.8.1.7Unsigned_32read-writemandatory
rlStormCtrlMulticastEnable
OBJECT-TYPE
enable or disable the storm control for multicast frames
1.3.6.1.4.1.89.77.8.1.8TruthValueread-writemandatory
rlStormCtrlMulticastRate
OBJECT-TYPE
set the storm control rate limit for the multicast frames, 0 indicate blocking of frames from this type.
1.3.6.1.4.1.89.77.8.1.9Unsigned_32read-writemandatory
rlStormCtrlSetDefaultRateType
OBJECT-TYPE
indicate if return the rate unit type to its default.
1.3.6.1.4.1.89.77.8.1.10TruthValueread-writemandatory
rlStormCtrlSetDefaultUnknownUnicastEnable
OBJECT-TYPE
indicate if return the storm control enable for unknown unicast frames to its default.
1.3.6.1.4.1.89.77.8.1.11TruthValueread-writemandatory
rlStormCtrlSetDefaultUnknownUnicastRate
OBJECT-TYPE
indicate if return the storm control rate limit for the unknown unicast frames to its default.
1.3.6.1.4.1.89.77.8.1.12TruthValueread-writemandatory
rlStormCtrlSetDefaultUnknownMulticastEnable
OBJECT-TYPE
indicate if return the storm control enable for unknown multicast frames to its default.
1.3.6.1.4.1.89.77.8.1.13TruthValueread-writemandatory
rlStormCtrlSetDefaultUnknownMulticastRate
OBJECT-TYPE
indicate if return the storm control rate limit for the unknown multicast frames to its default.
1.3.6.1.4.1.89.77.8.1.14TruthValueread-writemandatory
rlStormCtrlSetDefaultBroadcastEnable
OBJECT-TYPE
indicate if return the storm control enable for Broadcast frames to its default.
1.3.6.1.4.1.89.77.8.1.15TruthValueread-writemandatory
rlStormCtrlSetDefaultBroadcastRate
OBJECT-TYPE
indicate if return the storm control rate limit for the Broadcast frames to its default.
1.3.6.1.4.1.89.77.8.1.16TruthValueread-writemandatory
rlStormCtrlSetDefaultMulticastEnable
OBJECT-TYPE
indicate if return the storm control for multicast frames to its default.
1.3.6.1.4.1.89.77.8.1.17TruthValueread-writemandatory
rlStormCtrlSetDefaultMulticastRate
OBJECT-TYPE
indicate if return the storm control rate limit for the multicast frames to its default.
1.3.6.1.4.1.89.77.8.1.18TruthValueread-writemandatory
rlStormCtrlGroupTable
OBJECT-TYPE
The table contains per port for each supported frame type to which group it belongs.
1.3.6.1.4.1.89.77.9not-accessiblemandatory
rlStormCtrlGroupEntry
OBJECT-TYPE
group id for each supported frame type defined per port.
1.3.6.1.4.1.89.77.9.1not-accessiblemandatory
rlStormCtrlGroupUnknownUnicastId
OBJECT-TYPE
Indicates the id of the group for unknown unicast frame type that the port belongs to, 0 indicates that unknown unicast frame type is not supported.
1.3.6.1.4.1.89.77.9.1.1INTEGERread-onlymandatory
rlStormCtrlGroupUnknownMulticastId
OBJECT-TYPE
Indicates the id of the group for unknown multicast frame type that the port belongs to, 0 indicates that unknown multicast frame type is not supported.
1.3.6.1.4.1.89.77.9.1.2INTEGERread-onlymandatory
rlStormCtrlGroupBroadcastId
OBJECT-TYPE
Indicates the id of the group for broadcast frame type that the port belongs to, 0 indicates that broadcast frame type is not supported.
1.3.6.1.4.1.89.77.9.1.3INTEGERread-onlymandatory
rlStormCtrlGroupMulticastId
OBJECT-TYPE
Indicates the id of the group for multicast frame type that the port belongs to, 0 indicates that multicast frame type is not supported.
1.3.6.1.4.1.89.77.9.1.4INTEGERread-onlymandatory
rlSsh
OBJECT-IDENTITY
1.3.6.1.4.1.89.78
rlAAA
OBJECT-IDENTITY
1.3.6.1.4.1.89.79
rlRadius
OBJECT-IDENTITY
1.3.6.1.4.1.89.80
rlTraceRoute
OBJECT-IDENTITY
1.3.6.1.4.1.89.81
rlTraceRouteMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.81.1INTEGERread-onlymandatory
rlSyslog
OBJECT-IDENTITY
1.3.6.1.4.1.89.82
rlEnv
OBJECT-IDENTITY
1.3.6.1.4.1.89.83
rlSmon
OBJECT-IDENTITY
1.3.6.1.4.1.89.84
rlPortCopyMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.84.1INTEGERread-onlymandatory
rlPortCopySupport
OBJECT-TYPE
supported - The standard portCopy is supported. notSupported - the standard portCopy is not supported. only basic portCopy operation is supported.
1.3.6.1.4.1.89.84.2INTEGER {supported(1), notSupported(2)}read-onlymandatory
rlPortCopyVlanTaggingTable
OBJECT-TYPE
A supplementing table for portCopyTable. For every portCopyDest a vlan-tagging option is available.
1.3.6.1.4.1.89.84.3not-accessiblemandatory
rlPortCopyVlanTaggingEntry
OBJECT-TYPE
Each entry specify how mirrored packets will transmit from the portCopyDest: Tagged or unTagged. The values in this entry will be valid only when the dot1dBasePort will be configured as a portCopyDest in the portCopyTable.
1.3.6.1.4.1.89.84.3.1not-accessiblemandatory
rlPortCopyVlanTagging
OBJECT-TYPE
TRUE - Mirrored packets will transmit from portCopyDest - Tagged FALSE - Mirrored packets will transmit from portCopyDest - unTagged
1.3.6.1.4.1.89.84.3.1.1TruthValueread-writemandatory
rlSocket
OBJECT-IDENTITY
1.3.6.1.4.1.89.85
rlSocketMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.85.1INTEGERread-onlymandatory
rlSocketTable
OBJECT-TYPE
The (conceptual) table listing the sockets which are currently open in the system.
1.3.6.1.4.1.89.85.2not-accessiblemandatory
rlSocketEntry
OBJECT-TYPE
An entry (conceptual row) in the SocketTable.
1.3.6.1.4.1.89.85.2.1not-accessiblemandatory
rlSocketId
OBJECT-TYPE
The value of the id of the socket.
1.3.6.1.4.1.89.85.2.1.1INTEGERread-onlymandatory
rlSocketType
OBJECT-TYPE
Specifies the type of the socket.
1.3.6.1.4.1.89.85.2.1.2INTEGER {stream(1), dgram(2), raw(3)}read-onlymandatory
rlSocketState
OBJECT-TYPE
Specifies the state in which the socket is in.
1.3.6.1.4.1.89.85.2.1.3INTEGER {connected(1), notConnected(2), recvClosed(3), sendClosed(4), closed(5)}read-onlymandatory
rlSocketBlockMode
OBJECT-TYPE
Specifies the blocking mode of the socket.
1.3.6.1.4.1.89.85.2.1.4INTEGER {blocking(1), nonBlocking(2)}read-onlymandatory
rlSocketUpTime
OBJECT-TYPE
The time elapsed since this socket was created.
1.3.6.1.4.1.89.85.2.1.5TimeTicksread-onlymandatory
rlDigitalKeyManage
OBJECT-IDENTITY
1.3.6.1.4.1.89.86
rlMD5KeyChainTable
OBJECT-TYPE
Key-chains and key ID's
1.3.6.1.4.1.89.86.1not-accessiblemandatory
rlMD5KeyChainEntry
OBJECT-TYPE
Key-chain with key ID that belongs to this chain
1.3.6.1.4.1.89.86.1.1not-accessiblemandatory
rlMD5KeyChainName
OBJECT-TYPE
Name of the key-chain to which belongs the secret authentication key
1.3.6.1.4.1.89.86.1.1.1DisplayStringread-onlymandatory
rlMD5KeyChainKeyId
OBJECT-TYPE
A 8-bit identifier for the secret authentication key. This identifier is the same as key ID used in rlMD5KeyTable.
1.3.6.1.4.1.89.86.1.1.2INTEGER (1..255)read-onlymandatory
rlMD5KeyChainKeyRowStatus
OBJECT-TYPE
It is used to insert, update or delete an entry
1.3.6.1.4.1.89.86.1.1.3RowStatusread-writemandatory
rlMD5KeyTable
OBJECT-TYPE
Secret authentication keys used by MD5 Authentication Algorithm
1.3.6.1.4.1.89.86.2not-accessiblemandatory
rlMD5KeyEntry
OBJECT-TYPE
Secret authentication key with all related parameters
1.3.6.1.4.1.89.86.2.1not-accessiblemandatory
rlMD5KeyId
OBJECT-TYPE
A 8-bit identifier for the secret authentication key
1.3.6.1.4.1.89.86.2.1.1INTEGER (1..255)read-onlymandatory
rlMD5Key
OBJECT-TYPE
The 128-bit secret authentication key. The key can get value only once and cannot be modified. When read, rlMD5KeyChainKey always returns an Octet String of length zero.
1.3.6.1.4.1.89.86.2.1.2DisplayString (SIZE(1..16))read-writemandatory
rlMD5KeyStartAccept
OBJECT-TYPE
The time that the router will start accepting packets that have been created with the given key
1.3.6.1.4.1.89.86.2.1.3DateAndTimeread-writemandatory
rlMD5KeyStartGenerate
OBJECT-TYPE
The time that the router will start using the key for packet generation
1.3.6.1.4.1.89.86.2.1.4DateAndTimeread-writemandatory
rlMD5KeyStopGenerate
OBJECT-TYPE
The time that the router will stop using the key for packet generation
1.3.6.1.4.1.89.86.2.1.5DateAndTimeread-writemandatory
rlMD5KeyStopAccept
OBJECT-TYPE
The time that the router will stop accepting packets that have been created with the given key
1.3.6.1.4.1.89.86.2.1.6DateAndTimeread-writemandatory
rlMD5KeyRowStatus
OBJECT-TYPE
It is used to insert, update or delete an entry
1.3.6.1.4.1.89.86.2.1.7RowStatusread-writemandatory
rlCopy
OBJECT-IDENTITY
1.3.6.1.4.1.89.87
rlQosCliMib
OBJECT-IDENTITY
1.3.6.1.4.1.89.88
rlMngInf
OBJECT-IDENTITY
1.3.6.1.4.1.89.89
rlPhy
OBJECT-IDENTITY
1.3.6.1.4.1.89.90
rlJumboFrames
OBJECT-IDENTITY
1.3.6.1.4.1.89.91
rlJumboFramesCurrentStatus
OBJECT-TYPE
Show the current Jumbo Frames status
1.3.6.1.4.1.89.91.1INTEGER {enable(1), disable(2)}read-onlymandatory
rlJumboFramesStatusAfterReset
OBJECT-TYPE
Set the Jumbo Frames status after reset
1.3.6.1.4.1.89.91.2INTEGER {enable(1), disable(2)}read-writemandatory
rlTimeSynchronization
OBJECT-IDENTITY
1.3.6.1.4.1.89.92
rlDnsCl
OBJECT-IDENTITY
1.3.6.1.4.1.89.93
rlCDB
OBJECT-IDENTITY
1.3.6.1.4.1.89.94
rlStartupCDBChanged
OBJECT-TYPE
Indicates whether the startup CDB has changed between the router's last two reboots
1.3.6.1.4.1.89.94.1TruthValueread-onlymandatory
rlManualReboot
OBJECT-TYPE
Indicates whether the device was shutdown orderly before reboot or not (i.e. power failure)
1.3.6.1.4.1.89.94.2TruthValueread-onlymandatory
rldot1x
OBJECT-IDENTITY
1.3.6.1.4.1.89.95
rldot1xMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.89.95.1INTEGERread-onlymandatory
rldot1xExtAuthSessionStatsTable
OBJECT-TYPE
A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
1.3.6.1.4.1.89.95.2not-accessiblemandatory
rldot1xExtAuthSessionStatsEntry
OBJECT-TYPE
The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
1.3.6.1.4.1.89.95.2.1not-accessiblemandatory
rlDot1xAuthSessionAuthenticMethod
OBJECT-TYPE
The authentication method used to establish the session.
1.3.6.1.4.1.89.95.2.1.1INTEGER {remoteAuthServer(1), localAuthServer(2), none(3)}read-onlymandatory
rldot1xGuestVlanSupported
OBJECT-TYPE
indicate if guest vlan is supported.
1.3.6.1.4.1.89.95.3TruthValueread-onlymandatory
rldot1xGuestVlanVID
OBJECT-TYPE
specify the guest vlan tag , 0 for non exiting.
1.3.6.1.4.1.89.95.4VlanIndexread-writemandatory
rldot1xGuestVlanPorts
OBJECT-TYPE
the ports that can be members in the guest vlan
1.3.6.1.4.1.89.95.5PortListread-writemandatory
rldot1xUnAuthenticatedVlanSupported
OBJECT-TYPE
indicate if unauthenticated Vlan is supported.
1.3.6.1.4.1.89.95.6TruthValueread-onlymandatory
rldot1xUnAuthenticatedVlanTable
OBJECT-TYPE
port belong to vlan in all port authenticated state except force unauthenticated table
1.3.6.1.4.1.89.95.7not-accessiblemandatory
rldot1xUnAuthenticatedVlanEntry
OBJECT-TYPE
port belong to vlan in all port authenticated state except force unauthenticated entry
1.3.6.1.4.1.89.95.7.1not-accessiblemandatory
rldot1xUnAuthenticatedVlanStatus
OBJECT-TYPE
The row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.89.95.7.1.1RowStatusread-writemandatory
rldot1xUserBasedVlanSupported
OBJECT-TYPE
indicate if user based Vlan is supported.
1.3.6.1.4.1.89.95.8TruthValueread-onlymandatory
rldot1xUserBasedVlanPorts
OBJECT-TYPE
the ports that can be members in the user based vlan
1.3.6.1.4.1.89.95.9PortListread-writemandatory
rldot1xAuthenticationPortTable
OBJECT-TYPE
A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
1.3.6.1.4.1.89.95.10not-accessiblemandatory
rldot1xAuthenticationPortEntry
OBJECT-TYPE
The Port number and mac method
1.3.6.1.4.1.89.95.10.1not-accessiblemandatory
rldot1xAuthenticationPortMethod
OBJECT-TYPE
The value of the mac based authenication.
1.3.6.1.4.1.89.95.10.1.1INTEGER {eapolOnly(1), macAndEapol(2), macOnly(3)}read-writemandatory
rldot1xAuthMultiStatsTable
OBJECT-TYPE
A table that contains the statistics objects for the Authenticator PAE associated with each Port and MAC for multisession 802.1x mode of operation. An entry appears in this table for each port and MAC that have an authentication session currently running under way for them.
1.3.6.1.4.1.89.95.11not-accessiblemandatory
rldot1xAuthMultiStatsEntry
OBJECT-TYPE
The statistics information for an Authenticator PAE.
1.3.6.1.4.1.89.95.11.1not-accessiblemandatory
rldot1xAuthMultiStatsPortNumber
OBJECT-TYPE
Port Number.
1.3.6.1.4.1.89.95.11.1.1INTEGERread-onlymandatory
rldot1xAuthMultiStatsSourceMac
OBJECT-TYPE
Mac of the authentication session.
1.3.6.1.4.1.89.95.11.1.2MacAddressread-onlymandatory
rldot1xAuthMultiEapolFramesRx
OBJECT-TYPE
The number of valid EAPOL frames of any type that have been received by this Authenticator.
1.3.6.1.4.1.89.95.11.1.3Counter32read-onlymandatory
rldot1xAuthMultiEapolFramesTx
OBJECT-TYPE
The number of EAPOL frames of any type that have been transmitted by this Authenticator.
1.3.6.1.4.1.89.95.11.1.4Counter32read-onlymandatory
rldot1xAuthMultiEapolStartFramesRx
OBJECT-TYPE
The number of EAPOL Start frames that have been received by this Authenticator.
1.3.6.1.4.1.89.95.11.1.5Counter32read-onlymandatory
rldot1xAuthMultiEapolLogoffFramesRx
OBJECT-TYPE
The number of EAPOL Logoff frames that have been received by this Authenticator.
1.3.6.1.4.1.89.95.11.1.6Counter32read-onlymandatory
rldot1xAuthMultiEapolRespIdFramesRx
OBJECT-TYPE
The number of EAP Resp/Id frames that have been received by this Authenticator.
1.3.6.1.4.1.89.95.11.1.7Counter32read-onlymandatory
rldot1xAuthMultiEapolRespFramesRx
OBJECT-TYPE
The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
1.3.6.1.4.1.89.95.11.1.8Counter32read-onlymandatory
rldot1xAuthMultiEapolReqIdFramesTx
OBJECT-TYPE
The number of EAP Req/Id frames that have been transmitted by this Authenticator.
1.3.6.1.4.1.89.95.11.1.9Counter32read-onlymandatory
rldot1xAuthMultiEapolReqFramesTx
OBJECT-TYPE
The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
1.3.6.1.4.1.89.95.11.1.10Counter32read-onlymandatory
rldot1xAuthMultiInvalidEapolFramesRx
OBJECT-TYPE
The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.
1.3.6.1.4.1.89.95.11.1.11Counter32read-onlymandatory
rldot1xAuthMultiEapLengthErrorFramesRx
OBJECT-TYPE
The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.
1.3.6.1.4.1.89.95.11.1.12Counter32read-onlymandatory
rldot1xAuthMultiDiagTable
OBJECT-TYPE
A table that contains the diagnostics objects for the Authenticator PAE associated with each Port and MAC. An entry appears in this table for each port and MAC that have an authentication session currently running under way for them.
1.3.6.1.4.1.89.95.12not-accessiblemandatory
rldot1xAuthMultiDiagEntry
OBJECT-TYPE
The diagnostics information for an Authenticator PAE.
1.3.6.1.4.1.89.95.12.1not-accessiblemandatory
rldot1xAuthMultiDiagPortNumber
OBJECT-TYPE
Port Number.
1.3.6.1.4.1.89.95.12.1.1INTEGERread-onlymandatory
rldot1xAuthMultiDiagSourceMac
OBJECT-TYPE
Mac of the authentication session.
1.3.6.1.4.1.89.95.12.1.2MacAddressread-onlymandatory
rldot1xAuthMultiEntersConnecting
OBJECT-TYPE
Counts the number of times that the state machine transitions to the CONNECTING state from any other state.
1.3.6.1.4.1.89.95.12.1.3Counter32read-onlymandatory
rldot1xAuthMultiEntersAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.
1.3.6.1.4.1.89.95.12.1.4Counter32read-onlymandatory
rldot1xAuthMultiAuthSuccessWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE).
1.3.6.1.4.1.89.95.12.1.5Counter32read-onlymandatory
rldot1xAuthMultiAuthFailWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).
1.3.6.1.4.1.89.95.12.1.6Counter32read-onlymandatory
rldot1xAuthMultiAuthReauthsWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).
1.3.6.1.4.1.89.95.12.1.7Counter32read-onlymandatory
rldot1xAuthMultiAuthEapStartsWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.
1.3.6.1.4.1.89.95.12.1.8Counter32read-onlymandatory
rldot1xAuthMultiAuthReauthsWhileAuthenticated
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
1.3.6.1.4.1.89.95.12.1.9Counter32read-onlymandatory
rldot1xAuthMultiAuthEapStartsWhileAuthenticated
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.
1.3.6.1.4.1.89.95.12.1.10Counter32read-onlymandatory
rldot1xAuthMultiBackendResponses
OBJECT-TYPE
Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.
1.3.6.1.4.1.89.95.12.1.11Counter32read-onlymandatory
rldot1xAuthMultiBackendAccessChallenges
OBJECT-TYPE
Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.
1.3.6.1.4.1.89.95.12.1.12Counter32read-onlymandatory
rldot1xAuthMultiBackendOtherRequestsToSupplicant
OBJECT-TYPE
Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
1.3.6.1.4.1.89.95.12.1.13Counter32read-onlymandatory
rldot1xAuthMultiBackendNonNakResponsesFromSupplicant
OBJECT-TYPE
Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticators chosen EAP-method.
1.3.6.1.4.1.89.95.12.1.14Counter32read-onlymandatory
rldot1xAuthMultiBackendAuthSuccesses
OBJECT-TYPE
Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.
1.3.6.1.4.1.89.95.12.1.15Counter32read-onlymandatory
rldot1xAuthMultiSessionStatsTable
OBJECT-TYPE
A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
1.3.6.1.4.1.89.95.13not-accessiblemandatory
rldot1xAuthMultiSessionStatsEntry
OBJECT-TYPE
The session statistics information for an Authenticator PAE. This shows the mandatory values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
1.3.6.1.4.1.89.95.13.1not-accessiblemandatory
rldot1xAuthMultiSessionStatsPortNumber
OBJECT-TYPE
Port Number.
1.3.6.1.4.1.89.95.13.1.1INTEGERread-onlymandatory
rldot1xAuthMultiSessionStatsSourceMac
OBJECT-TYPE
Mac of the authentication session.
1.3.6.1.4.1.89.95.13.1.2MacAddressread-onlymandatory
rldot1xAuthMultiSessionOctetsRx
OBJECT-TYPE
The number of octets received in user data frames on this Port during the session.
1.3.6.1.4.1.89.95.13.1.3Counter64read-onlymandatory
rldot1xAuthMultiSessionOctetsTx
OBJECT-TYPE
The number of octets transmitted in user data frames on this Port during the session.
1.3.6.1.4.1.89.95.13.1.4Counter64read-onlymandatory
rldot1xAuthMultiSessionFramesRx
OBJECT-TYPE
The number of user data frames received on this Port during the session.
1.3.6.1.4.1.89.95.13.1.5Counter32read-onlymandatory
rldot1xAuthMultiSessionFramesTx
OBJECT-TYPE
The number of user data frames transmitted on this Port during the session.
1.3.6.1.4.1.89.95.13.1.6Counter32read-onlymandatory
rldot1xAuthMultiSessionId
OBJECT-TYPE
A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
1.3.6.1.4.1.89.95.13.1.7SnmpAdminStringread-onlymandatory
rldot1xAuthMultiSessionTime
OBJECT-TYPE
The duration of the session in seconds.
1.3.6.1.4.1.89.95.13.1.8TimeTicksread-onlymandatory
rldot1xAuthMultiSessionUserName
OBJECT-TYPE
The User-Name representing the identity of the Supplicant PAE.
1.3.6.1.4.1.89.95.13.1.9SnmpAdminStringread-onlymandatory
rldot1xAuthMultiConfigTable
OBJECT-TYPE
A table that contains the configuration objects for the Authenticator PAE associated with each port and MAC. An entry appears in this table for each port and MAC that may authenticate access to itself.
1.3.6.1.4.1.89.95.14not-accessiblemandatory
rldot1xAuthMultiConfigEntry
OBJECT-TYPE
The configuration information for an Authenticator PAE.
1.3.6.1.4.1.89.95.14.1not-accessiblemandatory
rldot1xAuthMultiPortNumber
OBJECT-TYPE
Port Number.
1.3.6.1.4.1.89.95.14.1.1INTEGERread-onlymandatory
rldot1xAuthMultiSourceMac
OBJECT-TYPE
Mac of the authentication session.
1.3.6.1.4.1.89.95.14.1.2MacAddressread-onlymandatory
rldot1xAuthMultiPaeState
OBJECT-TYPE
The current value of the Authenticator PAE state machine.
1.3.6.1.4.1.89.95.14.1.3INTEGER {initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)}read-onlymandatory
rldot1xAuthMultiBackendAuthState
OBJECT-TYPE
The current state of the Backend Authentication state machine.
1.3.6.1.4.1.89.95.14.1.4INTEGER {request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)}read-onlymandatory
rldot1xAuthMultiControlledPortStatus
OBJECT-TYPE
The current value of the controlled Port status parameter for the Port.
1.3.6.1.4.1.89.95.14.1.5PaeControlledPortStatusread-onlymandatory
rldot1xBpduFilteringEnabled
OBJECT-TYPE
Specify that when 802.1x is globally disabled, 802.1x BPDU packets would be filtered or bridged.
1.3.6.1.4.1.89.95.15TruthValueread-writemandatory
rlFile
OBJECT-IDENTITY
1.3.6.1.4.1.89.96
rlAAAEap
OBJECT-IDENTITY
1.3.6.1.4.1.89.97
rlSNMP
OBJECT-IDENTITY
1.3.6.1.4.1.89.98
rlSsl
OBJECT-IDENTITY
1.3.6.1.4.1.89.100
rlMacBasePrio
OBJECT-IDENTITY
1.3.6.1.4.1.89.101
rlWlanAccessPoint
OBJECT-IDENTITY
1.3.6.1.4.1.89.102
rlLocalization
OBJECT-IDENTITY
1.3.6.1.4.1.89.103
rlRs232
OBJECT-IDENTITY
1.3.6.1.4.1.89.104
rlNicRedundancy
OBJECT-IDENTITY
1.3.6.1.4.1.89.105
rlAmap
OBJECT-IDENTITY
1.3.6.1.4.1.89.106
rlStack
OBJECT-IDENTITY
1.3.6.1.4.1.89.107
rlPoe
OBJECT-IDENTITY
1.3.6.1.4.1.89.108
rlUPnP
OBJECT-IDENTITY
1.3.6.1.4.1.89.109
rlLldp
OBJECT-IDENTITY
1.3.6.1.4.1.89.110
rlOib
OBJECT-IDENTITY
1.3.6.1.4.1.89.111
rlBridgeSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.89.112
rlDhcpSpoofing
OBJECT-IDENTITY
1.3.6.1.4.1.89.113
rlBonjour
OBJECT-IDENTITY
1.3.6.1.4.1.89.114
rlLinksysSmartMIB
OBJECT-IDENTITY
1.3.6.1.4.1.89.115
rlBrgMulticast
OBJECT-IDENTITY
1.3.6.1.4.1.89.116
rlBrgMcMngr
OBJECT-IDENTITY
1.3.6.1.4.1.89.117
rlGlobalIpAddrTable
OBJECT-IDENTITY
1.3.6.1.4.1.89.118
dlPrivate
OBJECT-IDENTITY
1.3.6.1.4.1.89.119
rlSecuritySuiteMib
OBJECT-IDENTITY
1.3.6.1.4.1.89.120
rlIntel
OBJECT-IDENTITY
1.3.6.1.4.1.89.121
rlAutoUpdate
OBJECT-IDENTITY
1.3.6.1.4.1.89.123
rlCpuCounters
OBJECT-IDENTITY
1.3.6.1.4.1.89.124
rlWlanMIB
OBJECT-IDENTITY
1.3.6.1.4.1.89.200
rndEndOfMibGroup
OBJECT-IDENTITY
1.3.6.1.4.1.89.1000
rndEndOfMib
OBJECT-TYPE
This variable indicates this is the end of RND MIB.
1.3.6.1.4.1.89.1000.1INTEGERread-onlymandatory

Notifications

NameOIDStatus
rxOverflowHWFault
NOTIFICATION-TYPE
An RX buffer overflow has occurred in one of the LAN or link interfaces. The bound variable rndErrorDesc provides the interface number.
1.3.6.1.4.1.89.0.3
txOverflowHWFault
NOTIFICATION-TYPE
Interport queue overflow has occurred in one of the LAN or link interfaces. The bound variable rndErrorDesc provides the interface number.
1.3.6.1.4.1.89.0.4
routeTableOverflow
NOTIFICATION-TYPE
An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP).
1.3.6.1.4.1.89.0.5
resetRequired
NOTIFICATION-TYPE
This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing algorithm is changed between SPF and Spanning Tree. The reset can be performed manually or using the variable rndAction.
1.3.6.1.4.1.89.0.10
endTftp
NOTIFICATION-TYPE
This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
1.3.6.1.4.1.89.0.12
abortTftp
NOTIFICATION-TYPE
This trap indicates that in the device aborted a TFTP session with the management station. Variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
1.3.6.1.4.1.89.0.13
startTftp
NOTIFICATION-TYPE
Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question
1.3.6.1.4.1.89.0.14
faultBackUp
NOTIFICATION-TYPE
Automantic switchover to backup link because of main link fault.
1.3.6.1.4.1.89.0.23
mainLinkUp
NOTIFICATION-TYPE
Communication returened to main link.
1.3.6.1.4.1.89.0.24
ipxRipTblOverflow
NOTIFICATION-TYPE
This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
1.3.6.1.4.1.89.0.36
ipxSapTblOverflow
NOTIFICATION-TYPE
This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
1.3.6.1.4.1.89.0.37
facsAccessVoilation
NOTIFICATION-TYPE
This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface. The bound variable rndErrorDesc, rndErrorSeverity(== info ) and interface Number.
1.3.6.1.4.1.89.0.49
autoConfigurationCompleted
NOTIFICATION-TYPE
This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info )
1.3.6.1.4.1.89.0.50
forwardingTabOverflow
NOTIFICATION-TYPE
This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
1.3.6.1.4.1.89.0.51
framRelaySwitchConnectionUp
NOTIFICATION-TYPE
This trap indicates that a connection establish between the Frame relay Switch and the WanGate. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
1.3.6.1.4.1.89.0.53
framRelaySwitchConnectionDown
NOTIFICATION-TYPE
This trap indicates that a connection between the Frame Relay Switch and the WanGate failed. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
1.3.6.1.4.1.89.0.54
errorsDuringInit
NOTIFICATION-TYPE
This trap indicates that the an error occured during initialization The bound variable rndErrorDesc, rndErrorSeverity(== error )
1.3.6.1.4.1.89.0.61
vlanDynPortAdded
NOTIFICATION-TYPE
1.3.6.1.4.1.89.0.66
vlanDynPortRemoved
NOTIFICATION-TYPE
1.3.6.1.4.1.89.0.67
rsSDclientsTableOverflow
NOTIFICATION-TYPE
This warning is generated when an overflow occurs in the clients table.
1.3.6.1.4.1.89.0.68
rsSDinactiveServer
NOTIFICATION-TYPE
This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive.
1.3.6.1.4.1.89.0.69
rsIpZhrConnectionsTableOverflow
NOTIFICATION-TYPE
The Zero Hop Routing connections Table has been overflown.
1.3.6.1.4.1.89.0.70
rsIpZhrReqStaticConnNotAccepted
NOTIFICATION-TYPE
The requested static connection was not accepted because there is no available IP virtual address to allocate to it.
1.3.6.1.4.1.89.0.71
rsIpZhrVirtualIpAsSource
NOTIFICATION-TYPE
The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections.
1.3.6.1.4.1.89.0.72
rsIpZhrNotAllocVirtualIp
NOTIFICATION-TYPE
The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this specific source IP.
1.3.6.1.4.1.89.0.73
rsSnmpSetRequestInSpecialCfgState
NOTIFICATION-TYPE
An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during sending the current configuration to an NMS.
1.3.6.1.4.1.89.0.74
rsPingCompletion
NOTIFICATION-TYPE
A rsPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated. The trap severity is info. The trap text will specify the following information: rsPingCompletionStatus, rsPingSentPackets, rsPingReceivedPackets In addition to the above listed objects (which are always present), the message will also specify the following quantities: if any responses were received: rsPingMinReturnTime rsPingAvgReturnTime rsPingMaxReturnTime
1.3.6.1.4.1.89.0.136
pppSecurityViolation
NOTIFICATION-TYPE
This trap indicates that a PPP link got an unrecognized secret. The bound variables rndErrorDesc, rndErrorSeverity(== warning ), interface Number. and pppSecurityIdentity
1.3.6.1.4.1.89.0.137
frDLCIStatudChange
NOTIFICATION-TYPE
1.3.6.1.4.1.89.0.138
papFailedCommunication
NOTIFICATION-TYPE
1.3.6.1.4.1.89.0.139
chapFailedCommunication
NOTIFICATION-TYPE
1.3.6.1.4.1.89.0.140
rsWSDRedundancySwitch
NOTIFICATION-TYPE
Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued.
1.3.6.1.4.1.89.0.141
rsDhcpAllocationFailure
NOTIFICATION-TYPE
DHCP failed to allocate an IP address to a requesting host because of memory shortage or inadequate configuration of available IP addresses.
1.3.6.1.4.1.89.0.142
rlIpFftStnOverflow
NOTIFICATION-TYPE
The IP SFFT overflow.
1.3.6.1.4.1.89.0.145
rlIpFftSubOverflow
NOTIFICATION-TYPE
The IP NFFT overflow.
1.3.6.1.4.1.89.0.146
rlIpxFftStnOverflow
NOTIFICATION-TYPE
The IPX SFFT overflow.
1.3.6.1.4.1.89.0.147
rlIpxFftSubOverflow
NOTIFICATION-TYPE
The IPX NFFT overflow.
1.3.6.1.4.1.89.0.148
rlIpmFftOverflow
NOTIFICATION-TYPE
The IPM FFT overflow.
1.3.6.1.4.1.89.0.149
rlPhysicalDescriptionChanged
NOTIFICATION-TYPE
Indicates that the physical decription of the device has changed
1.3.6.1.4.1.89.0.150
rldot1dStpPortStateForwarding
NOTIFICATION-TYPE
The trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state.
1.3.6.1.4.1.89.0.151
rldot1dStpPortStateNotForwarding
NOTIFICATION-TYPE
The trap is sent by a bridge when any of its configured ports transitions from the Forwarding state to the Blocking state.
1.3.6.1.4.1.89.0.152
rlPolicyDropPacketTrap
NOTIFICATION-TYPE
Indicates that the packet drop due to the policy
1.3.6.1.4.1.89.0.153
rlPolicyForwardPacketTrap
NOTIFICATION-TYPE
Indicates that the packet has forward based on policy
1.3.6.1.4.1.89.0.154
rlIgmpProxyTableOverflow
NOTIFICATION-TYPE
An IGMP PROXY Table overflow.
1.3.6.1.4.1.89.0.156
rlIgmpV1MsgReceived
NOTIFICATION-TYPE
An IGMP Message of v1 received on ifIndex.
1.3.6.1.4.1.89.0.157
rlVrrpEntriesDeleted
NOTIFICATION-TYPE
One or more VRRP entries deleted due to IP interface deletion or transition.
1.3.6.1.4.1.89.0.158
rlHotSwapTrap
NOTIFICATION-TYPE
Hot swap trap.
1.3.6.1.4.1.89.0.159
rlTrunkPortAddedTrap
NOTIFICATION-TYPE
Informational trap indicating that a port is added to a trunk
1.3.6.1.4.1.89.0.160
rlTrunkPortRemovedTrap
NOTIFICATION-TYPE
This warning is generated when a port removed from a trunk.
1.3.6.1.4.1.89.0.161
rlTrunkPortNotCapableTrap
NOTIFICATION-TYPE
Informational trap indicating that a port can not be added to a trunk because of device limitations or diffrent swIfType.
1.3.6.1.4.1.89.0.162
rlLockPortTrap
NOTIFICATION-TYPE
Informational trap indicating that a locked port receive a frame with new source Mac Address.
1.3.6.1.4.1.89.0.170
vlanDynVlanAdded
NOTIFICATION-TYPE
add gvrp dynamic vlan
1.3.6.1.4.1.89.0.171
vlanDynVlanRemoved
NOTIFICATION-TYPE
remove gvrp dynamic vlan
1.3.6.1.4.1.89.0.172
vlanDynamicToStatic
NOTIFICATION-TYPE
vlan status was changed from dynamic to static
1.3.6.1.4.1.89.0.173
vlanStaticToDynamic
NOTIFICATION-TYPE
vlan status was changed from static to dynamic
1.3.6.1.4.1.89.0.174
dstrSysLog
NOTIFICATION-TYPE
Master receive trap from slave , and forward it as trap
1.3.6.1.4.1.89.0.175
rlEnvMonFanStateChange
NOTIFICATION-TYPE
Trap indicating the fan state. rndErrorSeverity will be: 0 for fan state nomal, notPresent 1 for fan state warning, notFunctioning 2 for fan state critical 3 for fan state fatal The error text will specify the fan index, fan description and the exact fan state
1.3.6.1.4.1.89.0.176
rlEnvMonPowerSupplyStateChange
NOTIFICATION-TYPE
Trap indicating the power supply state. rndErrorSeverity will be: 0 for power supply state nomal, notPresent 1 for power supply state warning, notFunctioning 2 for power supply state critical 3 for power supply state fatal The error text will specify the power supply index, power supply description and the exact power supply state
1.3.6.1.4.1.89.0.177
rlStackStateChange
NOTIFICATION-TYPE
Trap indicating the stack connection state 0 for stack state connected, 1 for stack state disconnected
1.3.6.1.4.1.89.0.178
rlEnvMonTemperatureRisingAlarm
NOTIFICATION-TYPE
Trap indicating that the temperature in the device has exceeded the device specific safe temperature threshold.
1.3.6.1.4.1.89.0.179
rlBrgMacAddFailedTrap
NOTIFICATION-TYPE
Informational trap indicating that adding dynamic mac/s failed due to full hash chain.
1.3.6.1.4.1.89.0.183
rldot1xPortStatusAuthorizedTrap
NOTIFICATION-TYPE
Informational trap indicating that port 802.1x status is authorized.
1.3.6.1.4.1.89.0.184
rldot1xPortStatusUnauthorizedTrap
NOTIFICATION-TYPE
Warning trap is indicating that port 802.1x status is unAuthorized.
1.3.6.1.4.1.89.0.185
swIfTablePortLock
NOTIFICATION-TYPE
Warning trap is indicating port lock hase began.
1.3.6.1.4.1.89.0.192
swIfTablePortUnLock
NOTIFICATION-TYPE
Warning trap is indicating port lock has ended.
1.3.6.1.4.1.89.0.193
rlAAAUserLocked
NOTIFICATION-TYPE
Warning trap indicating that the user was locked after number of consecutives unsuccessful login attempts.
1.3.6.1.4.1.89.0.194
bpduGuardPortSuspended
NOTIFICATION-TYPE
Warning trap indicating - Port was suspended because there was BPDU Guard violation.
1.3.6.1.4.1.89.0.202
rldot1xSupplicantMacAuthorizedTrap
NOTIFICATION-TYPE
Informational trap indicating that MAC authentication supplicant is authenticated and is allowed to access the network.
1.3.6.1.4.1.89.0.203
rldot1xSupplicantMacUnauthorizedTrap
NOTIFICATION-TYPE
Warning trap is indicating that Radius server rejects MAC authentication supplicant.
1.3.6.1.4.1.89.0.204
stpLoopbackDetection
NOTIFICATION-TYPE
Warning trap indicating - A loopback was detected on port.
1.3.6.1.4.1.89.0.205
stpLoopbackDetectionResolved
NOTIFICATION-TYPE
Warning trap indicating - A loopback detection resolved on port.
1.3.6.1.4.1.89.0.206