MIBs Depot

RADLAN-QOS-CLI-MIB

Last updated
2005-03-14 00:00
Organization
Radlan Computer Communications Ltd.
Revisions
2005-03-14 00:00, 2005-02-07 00:00, 2005-01-27 00:00, 2004-11-15 00:00, 2003-09-29 00:00, 2003-09-21 00:00, 2005-04-17 00:00
Namespace
radlan
Source file
RADLAN-QOS-CLI-MIB
Digest
sha256:c07fa3251750ab97284f670583c81eaf12d4009b4546ed87b8eb424c21ea85dc

Description

The private MIB module definition for Quality Of Service CLI in Radlan devices.

Contact

radlan.com

Imports

FromSymbols
IF-MIBInterfaceIndex, InterfaceIndexOrZero
RADLAN-MIBPercents, rnd
RADLAN-SNMPv2RowPointer, RowStatus, TruthValue
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
IANAifType-MIB
IEEE8021-PAE-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RADLAN-MIB
RADLAN-QOS-CLI-MIB
RADLAN-SNMPv2
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-SMI-v1
SNMPv2-TC
SNMPv2-TC-v1
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
AceActionType
TEXTUAL-CONVENTION
Specifies one of 3 ACE Actions: 1- Permit- permit to the traffic that define by the parameters. 2- Deny- deny the traffic that define by the parameter. 3- Deny- deny the traffic that define by the parameters and disable the port.
current
AceObjectType
TEXTUAL-CONVENTION
Specifies one of 8 ACE types: 1- IP ACE. 2- IP-TCP ACE. 3- IP-UDP ACE. 4- IP-offset ACE. 5- MAC ACE. 6- MAC-offset ACE. 7- IP-ICMP ACE. 8- IP-IGMP ACE.
current
AclDefaultAction
TEXTUAL-CONVENTION
Default action when the ACL reach end point.
current
AclObjectType
TEXTUAL-CONVENTION
Specifies one of 2 ACL types: 1- MAC ACL. 2- IP ACL
current
BinaryStatus
TEXTUAL-CONVENTION
Specifies Disable or enable.
current
ClassMapAction
TEXTUAL-CONVENTION
Specifies one of 8 Class-map actios: 1- no action. 2- Mark IP-Precedence. 3- Mark DSCP. 4- Set Egress queueu 5- Mark VPT 6- Choose queue by the VPT. 7- Choose queue by the DSCP. 8- Choose queue by the TCP/UDP port.
current
ClassMapType
TEXTUAL-CONVENTION
Specifies one of 2 Class-map types: 1- Match all. logical and between all statements. 2- Match any. logical or between all statements.
current
ClassOffsetType
TEXTUAL-CONVENTION
Specifies one of 6 offset types: 1- Absolute-start of the packet. 2- Layer 2-start of MAC header. 3- MPLS-start of MPLS header. 4- Layer 3-start of layer 3 header. 5- Layer 4-start of layer 4 header. 6- Layer 5-after TCP/UDP header. 7- VLAN. 8- input device port. 9- input device port. 10-VPT. 11-EtherType.
current
ClassTupleType
TEXTUAL-CONVENTION
Specifies one of Tuple types
current
InterfaceType
TEXTUAL-CONVENTION
Interface type.
current
PolicerAction
TEXTUAL-CONVENTION
Specifies one of 4 Policer Action: 1- No Action 2- Drop out of profile packets. 3- Remark out of profile packets. 4- Remark to explicit value out of profile packets 5- this policer is part of cascade chain
current
PolicerType
TEXTUAL-CONVENTION
Specifies one of 3 Policer types: 1- Single policer only per one class map. 2- Aggregate policer can be applied to several class maps. 3- Cascade policer.
current
QosObjectBasicMode
TEXTUAL-CONVENTION
Specifies one of 6 QoS Basic mode: 1- none. means that only ACL can be applied. 2- 802.1p. queue is set by the VPT field. 3- DSCP. queue is set by the DSCP field 4- DSCP-Mutation. the DSCP mutate in the ingress and then the queue is set by the DSCP 5- TCP/UDP. the queue is set by the port number
current
QosObjectMode
TEXTUAL-CONVENTION
Specifies one of 3 QoS mode: 1- disable no QoS on the system 2- Basic Qos mode only trust mode with ACL are enabled. 3- Advance mode all Qos option are enabled. 4- Service Mode all Qos option are enabled only in service mode configuration
current
QueueType
TEXTUAL-CONVENTION
Queue type Ef or WRR.
current

Objects

NameOIDSyntaxAccessStatus
rlQosCliQosMode
OBJECT-TYPE
This scalar define in which mode the system will work: basic , advance or none.
1.3.6.1.4.1.89.88.1QosObjectModeread-writecurrent
rlQosCliBasicModeCfg
OBJECT-TYPE
This scalar define in which Basic mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none.
1.3.6.1.4.1.89.88.2QosObjectBasicModeread-writecurrent
rlQosMaxNumOfAce
OBJECT-TYPE
This scalar define in which Basic mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none.
1.3.6.1.4.1.89.88.3INTEGERread-writecurrent
rlQosOffsetTable
OBJECT-TYPE
This table specifies Offset Table information
1.3.6.1.4.1.89.88.4not-accessiblecurrent
rlQosOffsetEntry
OBJECT-TYPE
Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then the value will be the vlan tag. if the Type is in/out port it will be the device in/out port. The index is sequential integer represent by rlQosOffsetIndex
1.3.6.1.4.1.89.88.4.1not-accessiblecurrent
rlQosOffsetIndex
OBJECT-TYPE
An arbitrary incremental Index for the offset table.
1.3.6.1.4.1.89.88.4.1.1INTEGERnot-accessiblecurrent
rlQosOffsetType
OBJECT-TYPE
Start of the offset.
1.3.6.1.4.1.89.88.4.1.2ClassOffsetTyperead-createcurrent
rlQosOffsetValue
OBJECT-TYPE
The Offset value.
1.3.6.1.4.1.89.88.4.1.3INTEGERread-createcurrent
rlQosOffsetMask
OBJECT-TYPE
Define which bit to be extracted from the offset.
1.3.6.1.4.1.89.88.4.1.4INTEGER (0..255)read-createcurrent
rlQosOffsetPattern
OBJECT-TYPE
The value to match too.
1.3.6.1.4.1.89.88.4.1.5INTEGER (0..255)read-createcurrent
rlQosOffsetTuplePointer
OBJECT-TYPE
Pointer for the relevant Tuple.
1.3.6.1.4.1.89.88.4.1.6INTEGERread-createcurrent
rlQosOffsetStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.4.1.7RowStatusread-createcurrent
rlQosTupleTable
OBJECT-TYPE
This table specifies Tuple Table information
1.3.6.1.4.1.89.88.5not-accessiblecurrent
rlQosTupleEntry
OBJECT-TYPE
Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTupleIndex
1.3.6.1.4.1.89.88.5.1not-accessiblecurrent
rlQosTupleIndex
OBJECT-TYPE
An arbitrary incremental Index for the offset table.
1.3.6.1.4.1.89.88.5.1.1INTEGERnot-accessiblecurrent
rlQosTupleType
OBJECT-TYPE
Start of the offset.
1.3.6.1.4.1.89.88.5.1.2ClassTupleTyperead-createcurrent
rlQosTupleValue1
OBJECT-TYPE
The Tuple no.1 value can be regular integer values only.
1.3.6.1.4.1.89.88.5.1.3INTEGERread-createcurrent
rlQosTupleValue2
OBJECT-TYPE
The Tuple no.2 value can be IP/MAC address or protocol number with mask
1.3.6.1.4.1.89.88.5.1.4OCTET STRING (SIZE(0..12))read-createcurrent
rlQosTupleStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.5.1.5RowStatusread-createcurrent
rlQosAceTable
OBJECT-TYPE
This table specifies ACE table information
1.3.6.1.4.1.89.88.6not-accessiblecurrent
rlQosAceEntry
OBJECT-TYPE
Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceIndex
1.3.6.1.4.1.89.88.6.1not-accessiblecurrent
rlQosAceIndex
OBJECT-TYPE
An arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.89.88.6.1.1INTEGERnot-accessiblecurrent
rlQosAceAction
OBJECT-TYPE
ACE Action to take.
1.3.6.1.4.1.89.88.6.1.2AceActionTyperead-createcurrent
rlQosAceType
OBJECT-TYPE
ACE Type
1.3.6.1.4.1.89.88.6.1.3AceObjectTyperead-createcurrent
rlQosAceTuple1
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.4INTEGERread-createcurrent
rlQosAceTuple2
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.5INTEGERread-createcurrent
rlQosAceTuple3
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.6INTEGERread-createcurrent
rlQosAceTuple4
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.7INTEGERread-createcurrent
rlQosAceTuple5
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.8INTEGERread-createcurrent
rlQosAceTuple6
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.9INTEGERread-createcurrent
rlQosAceTuple7
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.10INTEGERread-createcurrent
rlQosAceTuple8
OBJECT-TYPE
ACE Tuple 1 pointer.
1.3.6.1.4.1.89.88.6.1.11INTEGERread-createcurrent
rlQosAceAccount
OBJECT-TYPE
ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE. For Broadcom ASICs this counter shows number of matched with ACE criteria packets. For Marvell ASICs TBD.
1.3.6.1.4.1.89.88.6.1.12BinaryStatusread-createcurrent
rlQosAceStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.6.1.13RowStatusread-createcurrent
rlQosAclTable
OBJECT-TYPE
This table specifies ACL table information
1.3.6.1.4.1.89.88.7not-accessiblecurrent
rlQosAclEntry
OBJECT-TYPE
Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference table. The index is sequential integer represent by rlQosAceIndex
1.3.6.1.4.1.89.88.7.1not-accessiblecurrent
rlQosAclIndex
OBJECT-TYPE
An arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.89.88.7.1.1INTEGERnot-accessiblecurrent
rlQosAclName
OBJECT-TYPE
Name ACL.
1.3.6.1.4.1.89.88.7.1.2DisplayString (SIZE(0..32))read-createcurrent
rlQosAclType
OBJECT-TYPE
ACL Type.
1.3.6.1.4.1.89.88.7.1.3AclObjectTyperead-createcurrent
rlQosAclStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.7.1.4RowStatusread-createcurrent
rlQosAclAceRefTable
OBJECT-TYPE
This table specifies the ACE to ACL relationship.
1.3.6.1.4.1.89.88.8not-accessiblecurrent
rlQosAclAceRefEntry
OBJECT-TYPE
Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAceRefAcePointer
1.3.6.1.4.1.89.88.8.1not-accessiblecurrent
rlQosAclAceRefAcePointer
OBJECT-TYPE
The Index is the ACE pointer
1.3.6.1.4.1.89.88.8.1.1INTEGERnot-accessiblecurrent
rlQosAclAceRefAclPointer
OBJECT-TYPE
ACL index Pointer
1.3.6.1.4.1.89.88.8.1.2INTEGERread-createcurrent
rlQosAclAceRefStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.8.1.3RowStatusread-createcurrent
rlQosClassMapTable
OBJECT-TYPE
This table specifies CCL table information
1.3.6.1.4.1.89.88.9not-accessiblecurrent
rlQosClassMapEntry
OBJECT-TYPE
Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The index is sequential integer represent by rlQosClassMapIndex
1.3.6.1.4.1.89.88.9.1not-accessiblecurrent
rlQosClassMapIndex
OBJECT-TYPE
Class Map Index
1.3.6.1.4.1.89.88.9.1.1INTEGERnot-accessiblecurrent
rlQosClassMapName
OBJECT-TYPE
Name of the Class Map.
1.3.6.1.4.1.89.88.9.1.2DisplayString (SIZE(0..32))read-createcurrent
rlQosClassMapType
OBJECT-TYPE
Class map type
1.3.6.1.4.1.89.88.9.1.3ClassMapTyperead-createcurrent
rlQosClassMapAction
OBJECT-TYPE
Class Map Action.
1.3.6.1.4.1.89.88.9.1.4ClassMapActionread-createcurrent
rlQosClassMapMarkValue
OBJECT-TYPE
Mark value when mark action has been chosen in Class Map Action field.
1.3.6.1.4.1.89.88.9.1.5INTEGERread-createcurrent
rlQosClassMapPolicer
OBJECT-TYPE
Policer pointer. 0-means no policer.
1.3.6.1.4.1.89.88.9.1.6INTEGERread-createcurrent
rlQosClassMapMatch1
OBJECT-TYPE
Match ACL 1 pointer.
1.3.6.1.4.1.89.88.9.1.7INTEGERread-createcurrent
rlQosClassMapMatch2
OBJECT-TYPE
Match ACL 2 pointer.
1.3.6.1.4.1.89.88.9.1.8INTEGERread-createcurrent
rlQosClassMapMarkVlan
OBJECT-TYPE
If 'enabled', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed.
1.3.6.1.4.1.89.88.9.1.9BinaryStatusread-createcurrent
rlQosClassMapNewVlan
OBJECT-TYPE
If rlQosClassMapMarkVlan 'enabled', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id.
1.3.6.1.4.1.89.88.9.1.10INTEGER (0..4095)read-createcurrent
rlQosClassMapNewPort
OBJECT-TYPE
If value not zero, than the classified traffic will be redirected to the new egress physical port. The value of this field sets new egress port.
1.3.6.1.4.1.89.88.9.1.11INTEGERread-createcurrent
rlQosClassMapCopyPort
OBJECT-TYPE
If value not zero, than the classified traffic will be copied to the desination copy port. The value of this field sets desination copy port.
1.3.6.1.4.1.89.88.9.1.12INTEGERread-createcurrent
rlQosClassMapStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.9.1.13RowStatusread-createcurrent
rlQosPolicerTable
OBJECT-TYPE
This table specifies All the Policers in the system Information
1.3.6.1.4.1.89.88.10not-accessiblecurrent
rlQosPolicerEntry
OBJECT-TYPE
Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. The index is sequential integer represent by rlQosPolicerIndex
1.3.6.1.4.1.89.88.10.1not-accessiblecurrent
rlQosPolicerIndex
OBJECT-TYPE
Policer Index.
1.3.6.1.4.1.89.88.10.1.1INTEGERnot-accessiblecurrent
rlQosPolicerName
OBJECT-TYPE
Name of the Policer.
1.3.6.1.4.1.89.88.10.1.2DisplayString (SIZE(0..32))read-createcurrent
rlQosPolicerType
OBJECT-TYPE
Policer type
1.3.6.1.4.1.89.88.10.1.3PolicerTyperead-createcurrent
rlQosPolicerCir
OBJECT-TYPE
Committed rate value.
1.3.6.1.4.1.89.88.10.1.4Unsigned32read-createcurrent
rlQosPolicerCbs
OBJECT-TYPE
Committed rate Value.
1.3.6.1.4.1.89.88.10.1.5Unsigned32read-createcurrent
rlQosPolicerAction
OBJECT-TYPE
Out of profile Action.
1.3.6.1.4.1.89.88.10.1.6PolicerActionread-createcurrent
rlQosPolicerCasPointerRemVal
OBJECT-TYPE
Pointer to use whan the type is cascade policer. 0-means no cascade policer. It can also be Remark value in case of explicit remark
1.3.6.1.4.1.89.88.10.1.7INTEGERread-createcurrent
rlQosPolicerStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.10.1.8RowStatusread-createcurrent
rlQosPolicyMapTable
OBJECT-TYPE
This table specifies Policy Map Table Information
1.3.6.1.4.1.89.88.11not-accessiblecurrent
rlQosPolicyMapEntry
OBJECT-TYPE
Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer represent by rlQosPolicerIndex
1.3.6.1.4.1.89.88.11.1not-accessiblecurrent
rlQosPolicyMapIndex
OBJECT-TYPE
Policy map Index.
1.3.6.1.4.1.89.88.11.1.1INTEGERnot-accessiblecurrent
rlQosPolicyMapName
OBJECT-TYPE
Policy map Name.
1.3.6.1.4.1.89.88.11.1.2DisplayString (SIZE(0..32))read-createcurrent
rlQosPolicyMapStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.11.1.3RowStatusread-createcurrent
rlQosPolicyClassRefTable
OBJECT-TYPE
This table specifies The relationship between policy map to class map
1.3.6.1.4.1.89.88.12not-accessiblecurrent
rlQosPolicyClassRefEntry
OBJECT-TYPE
Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer
1.3.6.1.4.1.89.88.12.1not-accessiblecurrent
rlQosPolicyClassRefClassPointer
OBJECT-TYPE
The Index is the Class-map pointer
1.3.6.1.4.1.89.88.12.1.1INTEGERnot-accessiblecurrent
rlQosPolicyClassRefPolicyPointer
OBJECT-TYPE
Policy map index Pointer
1.3.6.1.4.1.89.88.12.1.2INTEGERread-createcurrent
rlQosPolicyClassRefStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.12.1.3RowStatusread-createcurrent
rlQosIfPolicyTable
OBJECT-TYPE
This table specifies for each interface the Policy Map attach to it
1.3.6.1.4.1.89.88.13not-accessiblecurrent
rlQosIfPolicyEntry
OBJECT-TYPE
Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type represent by rlIfType
1.3.6.1.4.1.89.88.13.1not-accessiblecurrent
rlIfIndex
OBJECT-TYPE
Interface Index.
1.3.6.1.4.1.89.88.13.1.1InterfaceIndexnot-accessiblecurrent
rlIfType
OBJECT-TYPE
Interface Type(vlan/port).
1.3.6.1.4.1.89.88.13.1.2InterfaceTypenot-accessiblecurrent
rlQosIfPolicyMapPointerIn
OBJECT-TYPE
Policy map pointer Input.
1.3.6.1.4.1.89.88.13.1.3INTEGERread-createcurrent
rlQosIfPolicyMapPointerOut
OBJECT-TYPE
Policy map pointer Output.
1.3.6.1.4.1.89.88.13.1.4INTEGERread-createcurrent
rlQosIfTrustActive
OBJECT-TYPE
Interface Basic Mode Trust is active or not .
1.3.6.1.4.1.89.88.13.1.5BinaryStatusread-createcurrent
rlQosPortShaperStatus
OBJECT-TYPE
If there is shaper on the port
1.3.6.1.4.1.89.88.13.1.6BinaryStatusread-createcurrent
rlQosCirPortShaper
OBJECT-TYPE
The CIR for the port shaper. N/A when the shper is disabled
1.3.6.1.4.1.89.88.13.1.7INTEGERread-createcurrent
rlQosCbsPortShaper
OBJECT-TYPE
The CBS for the port shaper. N/A when the shper is disabled
1.3.6.1.4.1.89.88.13.1.8INTEGERread-createcurrent
rlQosIfProfilePointer
OBJECT-TYPE
Interface Profile name pointer.
1.3.6.1.4.1.89.88.13.1.9DisplayString (SIZE(0..32))read-createcurrent
rlQosQueueProfilePointer
OBJECT-TYPE
Queue Profile name pointer.
1.3.6.1.4.1.89.88.13.1.10DisplayString (SIZE(0..32))read-createcurrent
rlQosQueueShapeProfilePointer
OBJECT-TYPE
Queue shape Profile pointer.
1.3.6.1.4.1.89.88.13.1.11INTEGERread-createcurrent
rlQosAclDefaultAction
OBJECT-TYPE
When one ACL is enterd then what to do for the last rull.
1.3.6.1.4.1.89.88.13.1.12AclDefaultActionread-createcurrent
rlQosIfPolicyMapStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.13.1.13RowStatusread-createcurrent
rlQosIfAclIn
OBJECT-TYPE
Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.89.88.13.1.14INTEGERread-createcurrent
rlQosIfAclOut
OBJECT-TYPE
Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.89.88.13.1.15INTEGERread-createcurrent
rlQosIfPolicerIn
OBJECT-TYPE
Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied.
1.3.6.1.4.1.89.88.13.1.16INTEGERread-createcurrent
rlQosPortRateLimitStatus
OBJECT-TYPE
If there is Rate limit on the port
1.3.6.1.4.1.89.88.13.1.17BinaryStatusread-createcurrent
rlQosCirPortRateLimit
OBJECT-TYPE
The CIR for the port rate limit. N/A when the Rate limit is disabled
1.3.6.1.4.1.89.88.13.1.18INTEGERread-createcurrent
rlQosCbsPortRateLimit
OBJECT-TYPE
The CBS for the port Rate limit. N/A when the Rate limit is disabled
1.3.6.1.4.1.89.88.13.1.19INTEGERread-createcurrent
rlQosIfProfileCfgTable
OBJECT-TYPE
This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters.
1.3.6.1.4.1.89.88.14not-accessiblecurrent
rlQosIfProfileCfgEntry
OBJECT-TYPE
Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability factor for Drop precedence 0,1,2 and the WRED Q factor and the EF priority and the WRR weight. The index is Interface Index represent by rlIfProfileName and queue-id represent by rlQosQueueId
1.3.6.1.4.1.89.88.14.1not-accessiblecurrent
rlIfProfileName
OBJECT-TYPE
Interface Index.
1.3.6.1.4.1.89.88.14.1.1DisplayString (SIZE(0..32))not-accessiblecurrent
rlQosQueueId
OBJECT-TYPE
Queue id Index.
1.3.6.1.4.1.89.88.14.1.2INTEGER (1..8)not-accessiblecurrent
rlQosTdThersholdDp0
OBJECT-TYPE
Tail Drop Threshold for Drop Precedence 0.
1.3.6.1.4.1.89.88.14.1.3INTEGER (0..100)read-createcurrent
rlQosTdThersholdDp1
OBJECT-TYPE
Tail Drop Threshold for Drop Precedence 1.
1.3.6.1.4.1.89.88.14.1.4INTEGER (0..100)read-createcurrent
rlQosTdThersholdDp2
OBJECT-TYPE
Tail Drop Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.5INTEGER (0..100)read-createcurrent
rlQosRedMinDp0
OBJECT-TYPE
WRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.6INTEGER (0..100)read-createcurrent
rlQosRedMaxDp0
OBJECT-TYPE
WRED Max Threshold for Drop Precedence 0.
1.3.6.1.4.1.89.88.14.1.7INTEGER (0..100)read-createcurrent
rlQosRedProbDp0
OBJECT-TYPE
WRED probability for Drop Precedence 0.
1.3.6.1.4.1.89.88.14.1.8INTEGERread-createcurrent
rlQosRedMinDp1
OBJECT-TYPE
WRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.9INTEGER (0..100)read-createcurrent
rlQosRedMaxDp1
OBJECT-TYPE
WRED Max Threshold for Drop Precedence 1.
1.3.6.1.4.1.89.88.14.1.10INTEGER (0..100)read-createcurrent
rlQosRedProbDp1
OBJECT-TYPE
WRED probability for Drop Precedence 1.
1.3.6.1.4.1.89.88.14.1.11INTEGERread-createcurrent
rlQosRedMinDp2
OBJECT-TYPE
WRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.12INTEGER (0..100)read-createcurrent
rlQosRedMaxDp2
OBJECT-TYPE
WRED Max Threshold for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.13INTEGER (0..100)read-createcurrent
rlQosRedProbDp2
OBJECT-TYPE
WRED probability for Drop Precedence 2.
1.3.6.1.4.1.89.88.14.1.14INTEGERread-createcurrent
rlQosRedQweight
OBJECT-TYPE
Q factor for WRED.
1.3.6.1.4.1.89.88.14.1.15INTEGERread-createcurrent
rlQosIfprofileStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.14.1.16RowStatusread-createcurrent
rlQosDscpMutationTable
OBJECT-TYPE
This table specifies The DSCP Mutation table
1.3.6.1.4.1.89.88.15not-accessiblecurrent
rlQosDscpMutationEntry
OBJECT-TYPE
Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
1.3.6.1.4.1.89.88.15.1not-accessiblecurrent
rlQosOldDscp
OBJECT-TYPE
Old DSCP.
1.3.6.1.4.1.89.88.15.1.1INTEGER (0..63)not-accessiblecurrent
rlQosNewDscp
OBJECT-TYPE
New DSCP.
1.3.6.1.4.1.89.88.15.1.2INTEGER (0..63)read-createcurrent
rlQosDscpRemarkTable
OBJECT-TYPE
This table specifies The DSCP Remark table
1.3.6.1.4.1.89.88.16not-accessiblecurrent
rlQosDscpRemarkEntry
OBJECT-TYPE
Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
1.3.6.1.4.1.89.88.16.1not-accessiblecurrent
rlQosRmOldDscp
OBJECT-TYPE
Old DSCP.
1.3.6.1.4.1.89.88.16.1.1INTEGER (0..63)not-accessiblecurrent
rlQosRmNewDscp
OBJECT-TYPE
New DSCP.
1.3.6.1.4.1.89.88.16.1.2INTEGER (0..63)read-createcurrent
rlQosCosQueueTable
OBJECT-TYPE
This table specifies The Cos to queue map table
1.3.6.1.4.1.89.88.17not-accessiblecurrent
rlQosCosQueueEntry
OBJECT-TYPE
Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex
1.3.6.1.4.1.89.88.17.1not-accessiblecurrent
rlQosCosIndex
OBJECT-TYPE
CoS value (0-7).
1.3.6.1.4.1.89.88.17.1.1INTEGER (0..7)not-accessiblecurrent
rlQosCosQueueId
OBJECT-TYPE
Queue ID.
1.3.6.1.4.1.89.88.17.1.2INTEGER (1..8)read-createcurrent
rlQosDscpQueueTable
OBJECT-TYPE
This table specifies The DSCP to Queue map table
1.3.6.1.4.1.89.88.18not-accessiblecurrent
rlQosDscpQueueEntry
OBJECT-TYPE
Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex
1.3.6.1.4.1.89.88.18.1not-accessiblecurrent
rlQosDscpIndex
OBJECT-TYPE
DSCP value.
1.3.6.1.4.1.89.88.18.1.1INTEGER (0..63)not-accessiblecurrent
rlQosQueueNum
OBJECT-TYPE
Queue Number.
1.3.6.1.4.1.89.88.18.1.2INTEGER (1..8)read-createcurrent
rlQosTcpPortQueueTable
OBJECT-TYPE
This table specifies TCP Port to Queue map table
1.3.6.1.4.1.89.88.19not-accessiblecurrent
rlQosTcpPortQueueEntry
OBJECT-TYPE
Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort
1.3.6.1.4.1.89.88.19.1not-accessiblecurrent
rlQosTcpPort
OBJECT-TYPE
TCP port number.
1.3.6.1.4.1.89.88.19.1.1INTEGERnot-accessiblecurrent
rlQosTcpQueueValue
OBJECT-TYPE
Queue Number.
1.3.6.1.4.1.89.88.19.1.2INTEGER (1..8)read-createcurrent
rlQosTcpPortQueueStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.19.1.3RowStatusread-createcurrent
rlQosUdpPortQueueTable
OBJECT-TYPE
This table specifies UDP Port to Queue map table
1.3.6.1.4.1.89.88.20not-accessiblecurrent
rlQosUdpPortQueueEntry
OBJECT-TYPE
Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort
1.3.6.1.4.1.89.88.20.1not-accessiblecurrent
rlQosUdpPort
OBJECT-TYPE
UDP port number.
1.3.6.1.4.1.89.88.20.1.1INTEGERnot-accessiblecurrent
rlQosUdpQueueValue
OBJECT-TYPE
Queue value.
1.3.6.1.4.1.89.88.20.1.2INTEGER (1..8)read-createcurrent
rlQosUdpPortQueueStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.20.1.3RowStatusread-createcurrent
rlQosEfManageTable
OBJECT-TYPE
This table specifies UDP Port to DSCP map table
1.3.6.1.4.1.89.88.21not-accessiblecurrent
rlQosEfManageEntry
OBJECT-TYPE
This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId
1.3.6.1.4.1.89.88.21.1not-accessiblecurrent
rlQosEfQueueId
OBJECT-TYPE
Queue-ID.
1.3.6.1.4.1.89.88.21.1.1INTEGER (1..8)not-accessiblecurrent
rlQosEfState
OBJECT-TYPE
Enable/disable
1.3.6.1.4.1.89.88.21.1.2BinaryStatusread-createcurrent
rlQosEfPriority
OBJECT-TYPE
The priority of the queue
1.3.6.1.4.1.89.88.21.1.3INTEGER (1..8)read-createcurrent
rlQosQueueProfileTable
OBJECT-TYPE
This table describes the queue managment profiles
1.3.6.1.4.1.89.88.22not-accessiblecurrent
rlQosQueueProfileEntry
OBJECT-TYPE
Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName
1.3.6.1.4.1.89.88.22.1not-accessiblecurrent
rlQueueProfileName
OBJECT-TYPE
Profile name for the Queue profile.
1.3.6.1.4.1.89.88.22.1.1DisplayString (SIZE(0..32))not-accessiblecurrent
rlQosTypeQueue1
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.2QueueTyperead-onlycurrent
rlQosValueQueue1
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.3INTEGERread-createcurrent
rlQosTypeQueue2
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.4QueueTyperead-onlycurrent
rlQosValueQueue2
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.5INTEGERread-createcurrent
rlQosTypeQueue3
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.6QueueTyperead-onlycurrent
rlQosValueQueue3
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.7INTEGERread-createcurrent
rlQosTypeQueue4
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.8QueueTyperead-onlycurrent
rlQosValueQueue4
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.9INTEGERread-createcurrent
rlQosTypeQueue5
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.10QueueTyperead-onlycurrent
rlQosValueQueue5
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.11INTEGERread-createcurrent
rlQosTypeQueue6
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.12QueueTyperead-onlycurrent
rlQosValueQueue6
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.13INTEGERread-createcurrent
rlQosTypeQueue7
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.14QueueTyperead-onlycurrent
rlQosValueQueue7
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.15INTEGERread-createcurrent
rlQosTypeQueue8
OBJECT-TYPE
EF or WRR
1.3.6.1.4.1.89.88.22.1.16QueueTyperead-onlycurrent
rlQosValueQueue8
OBJECT-TYPE
for EF read-only for wrr the weight
1.3.6.1.4.1.89.88.22.1.17INTEGERread-createcurrent
rlQosQueueProfileStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.22.1.18RowStatusread-createcurrent
rlQosNumOfIfConnections
OBJECT-TYPE
how many time this entry connected to the if policy table
1.3.6.1.4.1.89.88.22.1.19INTEGERread-onlycurrent
rlQosQueueShapeProfileTable
OBJECT-TYPE
This table specifies the queue shaper profile
1.3.6.1.4.1.89.88.23not-accessiblecurrent
rlQosQueueShapeProfileEntry
OBJECT-TYPE
Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex
1.3.6.1.4.1.89.88.23.1not-accessiblecurrent
rlQosQueueShapeIndex
OBJECT-TYPE
Profile Index.
1.3.6.1.4.1.89.88.23.1.1INTEGERnot-accessiblecurrent
rlQosCirQueue1
OBJECT-TYPE
CIR for Queue1 0 for not active
1.3.6.1.4.1.89.88.23.1.2INTEGERread-createcurrent
rlQosCbsQueue1
OBJECT-TYPE
CBS for Queue1 0 for not active
1.3.6.1.4.1.89.88.23.1.3INTEGERread-createcurrent
rlQosCirQueue2
OBJECT-TYPE
CIR for Queue2 0 for not active
1.3.6.1.4.1.89.88.23.1.4INTEGERread-createcurrent
rlQosCbsQueue2
OBJECT-TYPE
CBS for Queue2 0 for not active
1.3.6.1.4.1.89.88.23.1.5INTEGERread-createcurrent
rlQosCirQueue3
OBJECT-TYPE
CIR for Queue3 0 for not active
1.3.6.1.4.1.89.88.23.1.6INTEGERread-createcurrent
rlQosCbsQueue3
OBJECT-TYPE
CBS for Queue3 0 for not active
1.3.6.1.4.1.89.88.23.1.7INTEGERread-createcurrent
rlQosCirQueue4
OBJECT-TYPE
CIR for Queue4 0 for not active
1.3.6.1.4.1.89.88.23.1.8INTEGERread-createcurrent
rlQosCbsQueue4
OBJECT-TYPE
CBS for Queue4 0 for not active
1.3.6.1.4.1.89.88.23.1.9INTEGERread-createcurrent
rlQosCirQueue5
OBJECT-TYPE
CIR for Queue5 0 for not active
1.3.6.1.4.1.89.88.23.1.10INTEGERread-createcurrent
rlQosCbsQueue5
OBJECT-TYPE
CBS for Queue5 0 for not active
1.3.6.1.4.1.89.88.23.1.11INTEGERread-createcurrent
rlQosCirQueue6
OBJECT-TYPE
CIR for Queue6 0 for not active
1.3.6.1.4.1.89.88.23.1.12INTEGERread-createcurrent
rlQosCbsQueue6
OBJECT-TYPE
CBS for Queue6 0 for not active
1.3.6.1.4.1.89.88.23.1.13INTEGERread-createcurrent
rlQosCirQueue7
OBJECT-TYPE
CIR for Queue7 0 for not active
1.3.6.1.4.1.89.88.23.1.14INTEGERread-createcurrent
rlQosCbsQueue7
OBJECT-TYPE
CBS for Queue7 0 for not active
1.3.6.1.4.1.89.88.23.1.15INTEGERread-createcurrent
rlQosCirQueue8
OBJECT-TYPE
CIR for Queue8 0 for not active
1.3.6.1.4.1.89.88.23.1.16INTEGERread-createcurrent
rlQosCbsQueue8
OBJECT-TYPE
CBS for Queue8 0 for not active
1.3.6.1.4.1.89.88.23.1.17INTEGERread-createcurrent
rlQosQueueShapeProfileStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.23.1.18RowStatusread-createcurrent
rlQosAclCounterTable
OBJECT-TYPE
The table is used to show statistics for ACL applied on an interface.
1.3.6.1.4.1.89.88.24not-accessiblecurrent
rlQosAclCounterEntry
OBJECT-TYPE
This entry shows value of conter for a particular ACE of an ACL.
1.3.6.1.4.1.89.88.24.1not-accessiblecurrent
rlQosAclCounterInterface
OBJECT-TYPE
Interface Index on which ACL is applied.
1.3.6.1.4.1.89.88.24.1.1InterfaceIndexread-onlycurrent
rlQosAclCounterAclIndex
OBJECT-TYPE
Index of ACL, which was applied on the IfIndex.
1.3.6.1.4.1.89.88.24.1.2INTEGERread-onlycurrent
rlQosAclCounterAceIndex
OBJECT-TYPE
Index of ACE, which is belong to an ACL.
1.3.6.1.4.1.89.88.24.1.3INTEGERread-onlycurrent
rlQosAclCounterValue
OBJECT-TYPE
The value of the ACE counter. For Broadcom ASICs it shows number of matched packets. For Marvel ASICs -TBD.
1.3.6.1.4.1.89.88.24.1.4Counter32read-onlycurrent
rlQosFreeIndexesTable
OBJECT-TYPE
The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. Offset table - first free index. ACE table - last used index + ACE indexes delta. ACL table - first free index. Class Map table - last used index + Class Map indexes delta. Policy Map table - first free index. Policer Table - first free index. The ACE indexes delta and Class Map indexes delta are used to supply QoS MIB user easy insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and increment' approach is used in all cases.
1.3.6.1.4.1.89.88.25not-accessiblecurrent
rlQosFreeIndexesEntry
OBJECT-TYPE
The entry is used to get free index for particular table.
1.3.6.1.4.1.89.88.25.1not-accessiblecurrent
rlQosFreeIndexesTableId
OBJECT-TYPE
Identification of the table, for which free index is retrieved.
1.3.6.1.4.1.89.88.25.1.1INTEGER {tuple(1), offset(2), ace(3), acl(4), class(5), policy(6), policer(7), shaper(8)}read-onlycurrent
rlQosFreeIndexesValue
OBJECT-TYPE
Free index for table. 0 means no free entries.
1.3.6.1.4.1.89.88.25.1.2INTEGERread-onlycurrent
rlQosNamesToIndexesTable
OBJECT-TYPE
The table is used to get the ACL,Class-Map and Policy-Map indexes from the name.
1.3.6.1.4.1.89.88.26not-accessiblecurrent
rlQosNamesToIndexesEntry
OBJECT-TYPE
The entry is used to get index form particular name and table type.
1.3.6.1.4.1.89.88.26.1not-accessiblecurrent
rlQosNamesToIndexesTableId
OBJECT-TYPE
Identification of the table, for which the index is retrieved.
1.3.6.1.4.1.89.88.26.1.1INTEGER {acl(1), class(2), policy(3), policer(4)}not-accessiblecurrent
rlQosNamesToIndexesName
OBJECT-TYPE
The name of the entry
1.3.6.1.4.1.89.88.26.1.2DisplayString (SIZE(0..32))not-accessiblecurrent
rlQosNamesToIndexesValue
OBJECT-TYPE
the index for table
1.3.6.1.4.1.89.88.26.1.3INTEGERread-onlycurrent
rlQosStackControlQueue
OBJECT-TYPE
This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object can be used for warning messages when users assign a QoS map item, or a Class to the stack control queue.
1.3.6.1.4.1.89.88.27INTEGERread-onlycurrent
rlQosStackControlCos
OBJECT-TYPE
This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT). This scalar object can be used for warning messages when users assign a stack control CoS to a non-stacking control queue.
1.3.6.1.4.1.89.88.28INTEGERread-onlycurrent
rlQosCosQueueDefaultMapTable
OBJECT-TYPE
The table is used to set default 802.1p map (vpt to queue)
1.3.6.1.4.1.89.88.29not-accessiblecurrent
rlQosCosQueueDefaultMapEntry
OBJECT-TYPE
The entry is used to get index form particular name and table type.
1.3.6.1.4.1.89.88.29.1not-accessiblecurrent
rlQosCosQueueDefaultMapVpt
OBJECT-TYPE
vlan priority tag , 3 bits of priority which determine the service class.
1.3.6.1.4.1.89.88.29.1.1INTEGER (0..7)read-onlycurrent
rlQosCosQueueDefaultMapQueueId
OBJECT-TYPE
the queue id vary from the first queue id to Max Number of queues supported
1.3.6.1.4.1.89.88.29.1.2INTEGER (1..8)read-onlycurrent
rlQosPredefBlockAclTable
OBJECT-TYPE
The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simultaneously with IP and MAC ACLs.
1.3.6.1.4.1.89.88.30not-accessiblecurrent
rlQosPredefBlockAclEntry
OBJECT-TYPE
The entry is used to apply predefined ACLs to the interface.
1.3.6.1.4.1.89.88.30.1not-accessiblecurrent
rlQosPredefBlockAclIfIndex
OBJECT-TYPE
IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured.
1.3.6.1.4.1.89.88.30.1.1InterfaceIndexnot-accessiblecurrent
rlQosPredefBlockAclIfType
OBJECT-TYPE
Interface Type(vlan/port).
1.3.6.1.4.1.89.88.30.1.2InterfaceTypenot-accessiblecurrent
rlQosPredefBlockAclMask
OBJECT-TYPE
This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask Description ===================================================== LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated NetBuei/NetBios frames IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated NetBuei/NetBios frames
1.3.6.1.4.1.89.88.30.1.3OCTET STRING (SIZE(1))read-createcurrent
rlQosPredefBlockAclStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.30.1.4RowStatusread-createcurrent
rlQosAceTidxTable
OBJECT-TYPE
This table specifies ACE table with two index information
1.3.6.1.4.1.89.88.31not-accessiblecurrent
rlQosAceTidxEntry
OBJECT-TYPE
Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index
1.3.6.1.4.1.89.88.31.1not-accessiblecurrent
rlQosAceTidxAclIndex
OBJECT-TYPE
An arbitrary incremental Index for the ACL ACE connection.
1.3.6.1.4.1.89.88.31.1.1INTEGERnot-accessiblecurrent
rlQosAceTidxIndex
OBJECT-TYPE
An arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.89.88.31.1.2INTEGERnot-accessiblecurrent
rlQosAceTidxAction
OBJECT-TYPE
ACE Action to take.
1.3.6.1.4.1.89.88.31.1.3AceActionTyperead-createcurrent
rlQosAceTidxType
OBJECT-TYPE
ACE Type
1.3.6.1.4.1.89.88.31.1.4AceObjectTyperead-createcurrent
rlQosAceTidxTuple1
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.5INTEGERread-createcurrent
rlQosAceTidxTuple2
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.6INTEGERread-createcurrent
rlQosAceTidxTuple3
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.7INTEGERread-createcurrent
rlQosAceTidxTuple4
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.8INTEGERread-createcurrent
rlQosAceTidxTuple5
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.9INTEGERread-createcurrent
rlQosAceTidxTuple6
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.10INTEGERread-createcurrent
rlQosAceTidxTuple7
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.11INTEGERread-createcurrent
rlQosAceTidxTuple8
OBJECT-TYPE
ACE Tuple pointer.
1.3.6.1.4.1.89.88.31.1.12INTEGERread-createcurrent
rlQosAceTidxAccount
OBJECT-TYPE
ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE. For Broadcom ASICs this counter shows number of matched with ACE criteria packets. For Marvell ASICs TBD.
1.3.6.1.4.1.89.88.31.1.13BinaryStatusread-createcurrent
rlQosAceTidxStatus
OBJECT-TYPE
The status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.88.31.1.14RowStatusread-createcurrent
rlQosMibVersion
OBJECT-TYPE
MIB's version, the current version is 8 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. Change the unit in Policer table from bps to kbps 3 - Add new MIB's value for Textual convention QosObjectMode 4 - Add new MIBs rlQosDscpQueueDefaultMapTable 5 - Add new advanced action : trustCosDscp 6 - Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType Add ip-ICMP,ip-IGMP To AceObjectType Add vpt,ethertype To ClassOffsetType 7- Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit to rlQosIfPolicyTable 8 - Add Added rlQosDscpToDpTable
1.3.6.1.4.1.89.88.32INTEGERread-onlycurrent
rlQosDscpQueueDefaultMapTable
OBJECT-TYPE
The table is used to set default dscp to queue map
1.3.6.1.4.1.89.88.33not-accessiblecurrent
rlQosDscpQueueDefaultMapEntry
OBJECT-TYPE
The entry is used to get index form particular name and table type.
1.3.6.1.4.1.89.88.33.1not-accessiblecurrent
rlQosDscpQueueDefaultMapDscp
OBJECT-TYPE
dscp , 6 bits of priority which determine the service class.
1.3.6.1.4.1.89.88.33.1.1INTEGER (0..63)read-onlycurrent
rlQosDscpQueueDefaultMapQueueId
OBJECT-TYPE
the queue id vary from the first queue id to Max Number of queues supported
1.3.6.1.4.1.89.88.33.1.2INTEGER (1..8)read-onlycurrent
rlQosDscpToDpTable
OBJECT-TYPE
This table specifies The DSCP To Dp table
1.3.6.1.4.1.89.88.34not-accessiblecurrent
rlQosDscpToDpEntry
OBJECT-TYPE
Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlQosDscp
1.3.6.1.4.1.89.88.34.1not-accessiblecurrent
rlQosDscp
OBJECT-TYPE
Packet DSCP.
1.3.6.1.4.1.89.88.34.1.1INTEGER (0..63)not-accessiblecurrent
rlQosDp
OBJECT-TYPE
New DP.
1.3.6.1.4.1.89.88.34.1.2INTEGER (0..2)read-createcurrent