MIBs Depot

RADLAN-Physicaldescription-MIB

Last updated
2003-10-18 00:00
Organization
Radlan Computer Communications Ltd.
Revisions
2003-10-18 00:00
Namespace
radlan
Source file
RADLAN-Physicaldescription-MIB
Digest
sha256:af1821fe49919302a2c4291bf66ae824f8bbce70fd10fec43d3e97609c4abcba

Description

The private MIB module definition for physical device configuration.

Contact

radlan.com

Imports

FromSymbols
ENTITY-SENSOR-MIBEntitySensorStatus, EntitySensorValue
IF-MIBInterfaceIndex, InterfaceIndexOrZero, ifIndex
MAU-MIBJackType
RADLAN-HWENVIROMENTRlEnvMonState
RADLAN-MIBrnd, rndErrorDesc, rndErrorSeverity, rndNotifications
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION
SNMPv2-TC-v1DisplayString

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
ENTITY-MIB
ENTITY-SENSOR-MIB
IANA-ENTITY-MIB
IANA-MAU-MIB
IANAifType-MIB
IEEE8021-PAE-MIB
IF-MIB
MAU-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RADLAN-HWENVIROMENT
RADLAN-MIB
RADLAN-Physicaldescription-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-SMI-v1
SNMPv2-TC
SNMPv2-TC-v1
TOKEN-RING-RMON-MIB
UUID-TC-MIB

Objects

NameOIDSyntaxAccessStatus
rlPhdMibVersion
OBJECT-TYPE
MIB's version, the current version is 3. 1: original version 2: a. new tables rlPhdModuleHotSwapTable rlPhdStackOrderTable b. new scalars rlPhdStackReorder rlPhdNumberOfUnits rlPhdMaxNumberOfUnits 3: a. new field rlPhdModuleRole of rlPhdModuleTable b. new scalars rlPhdForceMasterUnit 4: a. new fields rlPhdModuleConnect1 and rlPhdModuleConnect2 of rlPhdModuleTable. 5: a. Prefix rlPhD were replaced by prefix rlPhd b. fields rlPhdModuleConnect1 and rlPhdModuleConnect2 are moved from rlPhdModuleTable to rlPhdStackTable. c. new fiels rlPhdStackSofrwareVer, rlPhdStackProductID and rlPhdStackMacAddr of rlPhdStackTable. d. new scalars rlPhdStackReloadUnit e. new scalars rlPhdStackOrderTopUnit rlPhdStackOrderBottomUnit rlPhdStackOrderPermutation
1.3.6.1.4.1.89.53.1INTEGERread-onlycurrent
rlPhdModuleTable
OBJECT-TYPE
For each module (board) there is an entry describing it in this module
1.3.6.1.4.1.89.53.2not-accessiblecurrent
rlPhdModuleEntry
OBJECT-TYPE
A entry of this table specifies a module (board)
1.3.6.1.4.1.89.53.2.1not-accessiblecurrent
rlPhdModuleStackUnit
OBJECT-TYPE
The stack unit to which this module belongs.
1.3.6.1.4.1.89.53.2.1.1INTEGERread-onlycurrent
rlPhdModuleIndex
OBJECT-TYPE
The number of the module in its stack unit
1.3.6.1.4.1.89.53.2.1.2INTEGERread-onlycurrent
rlPhdModuleType
OBJECT-TYPE
The module type: 1 - unknown 2 - extension 3 - acceleratorOpal 4 - acceleratorHertz3 5 - acceleratorUhual3 6 - hertz2 7 - uhual2 8 - hertz3 9 - uhual3ge 10 - uhual3sonet 11 - uhual3atm 12 - bcm2402 13 - lg8-0 14 - lg16-0 15 - lg8-1 16 - hertz2plus 17 - uhual2plus 18 - 2 98MX620 19 - 2 98EX120 20 - 1 98EX110 21 - two herz3 copper 22 - two uhaul3 fiber SX 23 - two uhaul3 copper 24 - hertz3 fiber 25 - two uhaul3 gibic 26 - two herz3 fiber 27 - two uhaul3 fiber LX 28 - bcm5615 stackable 24 29 - bcm5625x2 stackable 48 30 - EX125D-24 Giga ports 31 - EX115D-48 Fast 4 Giga 32 - SICC 4 copper ports 33 - SICC 4 fiber ports 34 - SICC gbic ports 35 - VesuvioT 36 - VesuvioF 37 - 98DX160 38 - 98DX240 39 - 98DX162 40 - 98DX242 41 - Gemstones Sapphire only 42 - Gemstones 24F+4G 43 - Gemstones 48F+4G 44 - Cheetah 24G + 3XG 45 - Cheetah 48G stacking 46 - Gemstones Sapphire only with PoE 47 - Gemstones 24F+4G with PoE 48 - Gemstones 48F+4G with PoE 49 - DLink DXS3250 50 - DLink DXS3227 51 - DLink DXS3227 with PoE 52 - Alcatel 24F+4G Non PoE 53 - Alcatel 48F+4G Non PoE 54 - Alcatel 24F+4G with PoE 55 - Alcatel 48F+4G with PoE 56 - HP Diamond 40F + 4G 57 - Cheetah cut 98DX163 16G + 2XG 58 - Cheetah cut 98DX243 24G + 2XG 59 - Diamond 8F 60 - Diamond 8F POE 61 - Diamond 8F MaxPower POE 62 - Diamond 8F 2G (copper + LC) 63 - Diamond 8F 2G 64 - Diamond 8G 65 - Diamond 8G POE 66 - Diamond 8G MaxPower POE
1.3.6.1.4.1.89.53.2.1.3INTEGERread-onlycurrent
rlPhdModuleStartingPort
OBJECT-TYPE
The minimal number of the port residing on this module.
1.3.6.1.4.1.89.53.2.1.4INTEGERread-onlycurrent
rlPhdModuleNumberOfPorts
OBJECT-TYPE
The number of ports residing on this module.
1.3.6.1.4.1.89.53.2.1.5INTEGERread-onlycurrent
rlPhdModuleRow
OBJECT-TYPE
On which row (the uppermost being numbered 1 and the highest row number asigned to the lowest row) this module resides within the chassis of its stack unit.
1.3.6.1.4.1.89.53.2.1.6INTEGERread-onlycurrent
rlPhdModuleColumn
OBJECT-TYPE
On which column (the leftmost being numbered 1 and the highest column number asigned to the rightmost column) this module resides within the chassis of its stack unit.
1.3.6.1.4.1.89.53.2.1.7INTEGERread-onlycurrent
rlPhdModuleRole
OBJECT-TYPE
The module role in the stack.
1.3.6.1.4.1.89.53.2.1.8INTEGER {standalone(1), master(2), backup(3), slave(4)}read-onlycurrent
rlPhdPortsTable
OBJECT-TYPE
Lists the physical or physical-related attributes of ports
1.3.6.1.4.1.89.53.3not-accessiblecurrent
rlPhdPortsEntry
OBJECT-TYPE
For each port, a entry describing attributes which are either physical or are derived from the features of the device hardware
1.3.6.1.4.1.89.53.3.1not-accessiblecurrent
rlPhdPortsIfIndex
OBJECT-TYPE
The L2 interface number associated with this port.
1.3.6.1.4.1.89.53.3.1.1INTEGERread-onlycurrent
rlPhdPortsIfIndexName
OBJECT-TYPE
The L2 interface number associated with this port, in string format based on the overall hardware architecture of the device (i.e., for monolithic devices just numbers, devices composed of modules (boards, cards) or stackable devices composed of monolithic units in form <module /stack unit number> - <port number on current module /stack unit number>, stackable devices in which each unit is composed of modules <stack unit number> - <module number> - <port number>
1.3.6.1.4.1.89.53.3.1.2DisplayString (SIZE(1..20))read-onlycurrent
rlPhdPortsMediaType
OBJECT-TYPE
The media type of this port.
1.3.6.1.4.1.89.53.3.1.3INTEGER {copper(1), optic-fiber(2), combo(3)}read-onlycurrent
rlPhdPortsStackUnit
OBJECT-TYPE
The number of the slot to which this port belongs.
1.3.6.1.4.1.89.53.3.1.4INTEGERread-onlycurrent
rlPhdPortsModuleNumber
OBJECT-TYPE
The number of the stack unit to which this port resides in.
1.3.6.1.4.1.89.53.3.1.5INTEGERread-onlycurrent
rlPhdPortsRow
OBJECT-TYPE
On which row (the uppermost being numbered 1 and the highest row number asigned to the lowest row) this port resides within its module.
1.3.6.1.4.1.89.53.3.1.6INTEGERread-onlycurrent
rlPhdPortsColumn
OBJECT-TYPE
On which column (the leftmost being numbered 1 and the highest column number asigned to the rightmost column) this this port resides within its module.
1.3.6.1.4.1.89.53.3.1.7INTEGERread-onlycurrent
rlPhdConnectorType
OBJECT-TYPE
Type of connector.
1.3.6.1.4.1.89.53.3.1.8JackTyperead-onlycurrent
rlPhdPortHaul
OBJECT-TYPE
Distance supported by this port.
1.3.6.1.4.1.89.53.3.1.9INTEGER {not-relevant(1), short(2), long(3)}read-onlycurrent
rlPhdStackTable
OBJECT-TYPE
For each stack unit there is an entry describing it in this table
1.3.6.1.4.1.89.53.4not-accessiblecurrent
rlPhdStackEntry
OBJECT-TYPE
A entry of this table specifies a stack unit
1.3.6.1.4.1.89.53.4.1not-accessiblecurrent
rlPhdStackUnit
OBJECT-TYPE
The stack unit described by this entry.
1.3.6.1.4.1.89.53.4.1.1INTEGERread-onlycurrent
rlPhdStackType
OBJECT-TYPE
The type of the stack unit described by this entry: 1 - box 3202 2 - box LG 3 - bcm 4 - prestera
1.3.6.1.4.1.89.53.4.1.2INTEGERread-onlycurrent
rlPhdStackConnect1
OBJECT-TYPE
The unit number connected to the Hyper GLink left side connection - 0 means not connected; other integer indicates the unit number.
1.3.6.1.4.1.89.53.4.1.3INTEGERread-onlycurrent
rlPhdStackConnect2
OBJECT-TYPE
The unit number connected to the Hyper GLink right side connection - 0 means not connected; other integer indicates the unit number.
1.3.6.1.4.1.89.53.4.1.4INTEGERread-onlycurrent
rlPhdStackSofrwareVer
OBJECT-TYPE
The Software version of the unit.
1.3.6.1.4.1.89.53.4.1.5DisplayString (SIZE(1..20))read-onlycurrent
rlPhdStackProductID
OBJECT-TYPE
The Product ID of the unit.
1.3.6.1.4.1.89.53.4.1.6DisplayString (SIZE(1..20))read-onlycurrent
rlPhdStackMacAddr
OBJECT-TYPE
The physical (MAC) address of the unit.
1.3.6.1.4.1.89.53.4.1.7PhysAddressread-onlycurrent
rlPhdModuleHotSwapTable
OBJECT-TYPE
For each module (board) there is an entry describing its Hot Swap status
1.3.6.1.4.1.89.53.5not-accessiblecurrent
rlPhdModuleHotSwapEntry
OBJECT-TYPE
A entry of this table specifies a module (board) Hot Swap status
1.3.6.1.4.1.89.53.5.1not-accessiblecurrent
rlPhdModuleHotSwapAdminStatus
OBJECT-TYPE
The desired state of the module. The off(1) state indicates that the module is not used and its rlPhdModuleHotSwapOperStatus is always off(2). The on{1) state indicates that the module may be used and its rlPhdModuleHotSwapOperStatus will be on(1) if it presents and off(2) if it does not present.
1.3.6.1.4.1.89.53.5.1.1INTEGER {on(1), off(2)}read-writecurrent
rlPhdModuleHotSwapOperStatus
OBJECT-TYPE
The current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwapAdminStatus is changed to up(1) then rlPhdModuleHotSwapOperStatus should change to up(1) if the module presents; it should remain in the down(2) state if and only if the module does not present.
1.3.6.1.4.1.89.53.5.1.2INTEGER {on(1), off(2)}read-onlycurrent
rlPhdStackOrderTable
OBJECT-TYPE
This table enables the user to configure the order of the stack units as displayed on his GUI. The order of the entries in this table corresponds to the last configured order. If the stack units order was never configured, the order will be the same as in the rlPhdStackTable.
1.3.6.1.4.1.89.53.6not-accessiblecurrent
rlPhdStackOrderEntry
OBJECT-TYPE
A entry of this table specifies a stack unit in the position desired by the user
1.3.6.1.4.1.89.53.6.1not-accessiblecurrent
rlPhdStackOrderCurrentUnitPosition
OBJECT-TYPE
The current stack unit position.
1.3.6.1.4.1.89.53.6.1.1INTEGERnot-accessiblecurrent
rlPhdStackOrderDesiredUnitPosition
OBJECT-TYPE
The desired stack unit position. Note that setting this MIB object will take effect only after setting the rlPhdStackReorder MIB object below. After setting this MIB object and until a further change of at least one instance of the rlPhdStackOrderDesiredUnitPosition object, the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and the corresponding rlPhdStackOrderDesiredUnitPosition object instance will be the same.
1.3.6.1.4.1.89.53.6.1.2INTEGERread-writecurrent
rlPhdStackOrderUnitIndex
OBJECT-TYPE
This is the original unit index, i.e. has the same value as rlPhdStackUnit above.
1.3.6.1.4.1.89.53.6.1.3INTEGERnot-accessiblecurrent
rlPhdStackOrderUnitType
OBJECT-TYPE
The type of the stack unit described by this entry. It has the same value as rlPhdStackType above. This information is duplicated here only for easier retrieval by the device manager.
1.3.6.1.4.1.89.53.6.1.4INTEGERread-onlycurrent
rlPhdStackReorder
OBJECT-TYPE
Setting this MIB object will cause the settings of the rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect. After setting this MIB object and until a further change of at least one instance of the rlPhdStackOrderDesiredUnitPosition object, the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and the corresponding rlPhdStackOrderDesiredUnitPosition object instance will be the same.
1.3.6.1.4.1.89.53.7INTEGER {reorder(1)}read-writecurrent
rlPhdNumberOfUnits
OBJECT-TYPE
Shows the current number of units in the stack.
1.3.6.1.4.1.89.53.8INTEGERread-onlycurrent
rlPhdMaxNumberOfUnits
OBJECT-TYPE
Shows the maximum number of units in the stack.
1.3.6.1.4.1.89.53.9INTEGERread-onlycurrent
rlPhdForceMasterUnit
OBJECT-TYPE
Force unit to be master.
1.3.6.1.4.1.89.53.10INTEGERread-writecurrent
rlPhdStackFixedUnit
OBJECT-TYPE
Determine which unit will be on bottom/top of list on Show-List command(see .
1.3.6.1.4.1.89.53.11INTEGERread-writecurrent
rlPhdStackFixedUnitLocation
OBJECT-TYPE
Determine the bottom/top object in the stack table.
1.3.6.1.4.1.89.53.12INTEGER {bottom(1), top(2)}read-writecurrent
rlPhdStackReloadUnit
OBJECT-TYPE
Reset a specific unit.
1.3.6.1.4.1.89.53.13INTEGERread-writecurrent
rlPhdUnitGenParamTable
OBJECT-TYPE
For each module (board) there is an entry describing it in this module
1.3.6.1.4.1.89.53.14not-accessiblecurrent
rlPhdUnitGenParamEntry
OBJECT-TYPE
A entry of this table specifies a module (board)
1.3.6.1.4.1.89.53.14.1not-accessiblecurrent
rlPhdUnitGenParamStackUnit
OBJECT-TYPE
The index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in the entity MIB of the product.
1.3.6.1.4.1.89.53.14.1.1INTEGERread-onlycurrent
rlPhdUnitGenParamSoftwareVersion
OBJECT-TYPE
Serial number of the product.
1.3.6.1.4.1.89.53.14.1.2DisplayStringread-onlycurrent
rlPhdUnitGenParamFirmwareVersion
OBJECT-TYPE
Serial number of the product.
1.3.6.1.4.1.89.53.14.1.3DisplayStringread-onlycurrent
rlPhdUnitGenParamHardwareVersion
OBJECT-TYPE
Serial number of the product.
1.3.6.1.4.1.89.53.14.1.4DisplayStringread-onlycurrent
rlPhdUnitGenParamSerialNum
OBJECT-TYPE
Serial number of the product.
1.3.6.1.4.1.89.53.14.1.5DisplayStringread-writecurrent
rlPhdUnitGenParamAssetTag
OBJECT-TYPE
Serial number of the product.
1.3.6.1.4.1.89.53.14.1.6DisplayStringread-writecurrent
rlPhdUnitGenParamServiceTag
OBJECT-TYPE
Asset tag of the product.
1.3.6.1.4.1.89.53.14.1.7DisplayStringread-onlycurrent
rlPhdUnitEnvParamTable
OBJECT-TYPE
For each module (board) there is an entry describing it in this module
1.3.6.1.4.1.89.53.15not-accessiblecurrent
rlPhdUnitEnvParamEntry
OBJECT-TYPE
A entry of this table specifies a module (board)
1.3.6.1.4.1.89.53.15.1not-accessiblecurrent
rlPhdUnitEnvParamStackUnit
OBJECT-TYPE
The index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in the entity MIB of the product.
1.3.6.1.4.1.89.53.15.1.1INTEGERread-onlycurrent
rlPhdUnitEnvParamMainPSStatus
OBJECT-TYPE
The mandatory state of the main PS being instrumented.
1.3.6.1.4.1.89.53.15.1.2RlEnvMonStateread-onlycurrent
rlPhdUnitEnvParamRedundantPSStatus
OBJECT-TYPE
The mandatory state of the redundant PS being instrumented.
1.3.6.1.4.1.89.53.15.1.3RlEnvMonStateread-onlycurrent
rlPhdUnitEnvParamFan1Status
OBJECT-TYPE
The mandatory state of the FAN 1 being instrumented.
1.3.6.1.4.1.89.53.15.1.4RlEnvMonStateread-onlycurrent
rlPhdUnitEnvParamFan2Status
OBJECT-TYPE
The mandatory state of the FAN 2 being instrumented.
1.3.6.1.4.1.89.53.15.1.5RlEnvMonStateread-onlycurrent
rlPhdUnitEnvParamFan3Status
OBJECT-TYPE
The mandatory state of the FAN 3 being instrumented.
1.3.6.1.4.1.89.53.15.1.6RlEnvMonStateread-onlycurrent
rlPhdUnitEnvParamFan4Status
OBJECT-TYPE
The mandatory state of the FAN 4 being instrumented.
1.3.6.1.4.1.89.53.15.1.7RlEnvMonStateread-onlycurrent
rlPhdUnitEnvParamFan5Status
OBJECT-TYPE
The mandatory state of the FAN 5 being instrumented.
1.3.6.1.4.1.89.53.15.1.8RlEnvMonStateread-onlycurrent
rlPhdUnitEnvParamTempSensorValue
OBJECT-TYPE
Current value for the Sensor being instrumented.
1.3.6.1.4.1.89.53.15.1.9EntitySensorValueread-onlycurrent
rlPhdUnitEnvParamTempSensorStatus
OBJECT-TYPE
Status value for the Sensor being instrumented.
1.3.6.1.4.1.89.53.15.1.10EntitySensorStatusread-onlycurrent
rlPhdUnitEnvParamUpTime
OBJECT-TYPE
Up time of the unit in 100th of second (sec/100).
1.3.6.1.4.1.89.53.15.1.11TimeTicksread-onlycurrent
rlPhdStackOrderTopUnit
OBJECT-TYPE
This scalar mib holds the Top unit for the stack order command
1.3.6.1.4.1.89.53.16INTEGERread-writecurrent
rlPhdStackOrderBottomUnit
OBJECT-TYPE
This scalar mib holds the Bottom unit for the stack order command
1.3.6.1.4.1.89.53.17INTEGERread-writecurrent
rlPhdStackOrderPermutation
OBJECT-TYPE
This scalar mib holds stack permutation
1.3.6.1.4.1.89.53.18OCTET STRING (SIZE(1..32))read-writecurrent
rlPhdNumberOfPoeUnits
OBJECT-TYPE
Shows the current number of poe units in the stack.
1.3.6.1.4.1.89.53.19INTEGERread-onlycurrent
rlPhdPoeTable
OBJECT-TYPE
For each module (board) there is an entry describing it in this module
1.3.6.1.4.1.89.53.20not-accessiblecurrent
rlPhdPoeEntry
OBJECT-TYPE
A entry of this table specifies a module (board)
1.3.6.1.4.1.89.53.20.1not-accessiblecurrent
rlPhdPoeStackUnit
OBJECT-TYPE
The stack unit to which this module belongs.
1.3.6.1.4.1.89.53.20.1.1INTEGERread-onlycurrent
rlPhdPoePresent
OBJECT-TYPE
The present state of the PoE module. The no(1) state indicates that the PoE module is not present. The yes{2) state indicates that the PoE module is present.
1.3.6.1.4.1.89.53.20.1.2INTEGER {no(1), yes(2)}read-onlycurrent
rlPhdPhyLedStackUnit
OBJECT-TYPE
This scalar mib holds the unit number for the stack light command
1.3.6.1.4.1.89.53.21INTEGERread-writecurrent
rlPhdPhyLedTimeout
OBJECT-TYPE
This scalar mib holds the timeout for the stack light command. May be in the range 2..60 sec. (default - 5 sec.), if the timeout = 0 - all units return to normal state.
1.3.6.1.4.1.89.53.22INTEGERread-writecurrent
rlCascadeTable
OBJECT-TYPE
For each cascaded port for stacking unit there is an entry describing it in this table
1.3.6.1.4.1.89.53.23not-accessiblecurrent
rlCascadeEntry
OBJECT-TYPE
A entry of this table specifies a cascaded port information in a unit
1.3.6.1.4.1.89.53.23.1not-accessiblecurrent
rlCascadeNeighborIfIndex
OBJECT-TYPE
The ifIndex of a stacking port in the neighbor unit - 0 means not connected; other integer indicates the IfIndex.
1.3.6.1.4.1.89.53.23.1.1InterfaceIndexOrZeroread-onlycurrent
rlCascadeNeighborUnit
OBJECT-TYPE
The unit number of the neighbor unit - 0 means not connected; other integer indicates the unit number.
1.3.6.1.4.1.89.53.23.1.2INTEGERread-onlycurrent
rlCascadeTrunkId
OBJECT-TYPE
The id of the trunk, the stacking port is member, zero if the port is not member of trunk.
1.3.6.1.4.1.89.53.23.1.3INTEGERread-onlycurrent
rlCascadeAfterResetTable
OBJECT-TYPE
For each cascaded port for stacking unit there is an entry describing it in this table after reset
1.3.6.1.4.1.89.53.24not-accessiblecurrent
rlCascadeAfterResetEntry
OBJECT-TYPE
A entry of this table specifies a cascaded port information in a unit after reset
1.3.6.1.4.1.89.53.24.1not-accessiblecurrent
rlCascadeIfIndexAfterReset
OBJECT-TYPE
The ifIndex of a stacking port after reset.
1.3.6.1.4.1.89.53.24.1.1InterfaceIndexread-onlycurrent
rlCascadeTrunkIdAfterReset
OBJECT-TYPE
The Id of the trunk, the stacking port will be member after reset, zero if the port is not member of trunk.
1.3.6.1.4.1.89.53.24.1.2INTEGERread-writecurrent
rlCascadeRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.89.53.24.1.3RowStatusread-createcurrent

Notifications

NameOIDStatus
rlStackUnitRemoved
NOTIFICATION-TYPE
Trap indicating that a unit was removed from the stack.
1.3.6.1.4.1.89.0.186current
rlStackConfigChangedRingChain
NOTIFICATION-TYPE
Trap indicating that the configuration of the stack has changed. - from ring to chain - from chain to ring.
1.3.6.1.4.1.89.0.187current
rlStackBackupUnitRemoved
NOTIFICATION-TYPE
Trap indicating that the backup unit was removed from the stack.
1.3.6.1.4.1.89.0.188current
rlStackMasterSwitchover
NOTIFICATION-TYPE
Trap indicating that a new master was elected. The old maste is the backup now.
1.3.6.1.4.1.89.0.189current
rlStackUnitDifferentSwVersion
NOTIFICATION-TYPE
Trap indicating that the new unit added to the stack has different software version than the master.
1.3.6.1.4.1.89.0.190current
rlStackDuplicateUnitNotJoin
NOTIFICATION-TYPE
Trap indicating that a new unit with duplicated unit id was added to the stack - but it will not join the stack.
1.3.6.1.4.1.89.0.191current
rlStackLinkChange
NOTIFICATION-TYPE
Trap indicating that Link has change in one of the Stacking Ports.
1.3.6.1.4.1.89.0.195current