MIBs Depot

RADLAN-SNMP-MIB

Last updated
1904-10-20 00:00
Organization
Radlan Computer Communications Ltd.
Revisions
1904-10-20 00:00
Namespace
radlan
Source file
RADLAN-SNMP-MIB
Digest
sha256:22b3419d6d84ffbdfd840e70d5db1dfb8fbd9d570384d455372f96e2c181a748

Description

Private MIB module for SNMP support in Radlan devices.

Contact

radlan.com

Imports

FromSymbols
RADLAN-MIBrnd
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
IANAifType-MIB
IEEE8021-PAE-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RADLAN-MIB
RADLAN-SNMP-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-SMI-v1
SNMPv2-TC
SNMPv2-TC-v1
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
RlSnmpUDPMridAddress
TEXTUAL-CONVENTION
Represents the UDP address of NMS and the MRID through which it is connected in order to access the agent: octets contents encoding 1-4 IP-address network-byte order 5-6 UDP-port network-byte order 7-8 MRID network-byte order
current

Objects

NameOIDSyntaxAccessStatus
rlSNMPv3
OBJECT-IDENTITY
1.3.6.1.4.1.89.98.1
rlTargetParamsTestingLevel
OBJECT-TYPE
The level of the tests done when configuring an entry in the snmpTargetParamsTable.
1.3.6.1.4.1.89.98.1.1INTEGER {low(1), high(2)}read-writecurrent
rlNotifyFilterTestingLevel
OBJECT-TYPE
The level of the tests done when configuring an entry in the snmpNotifyFilterTable.
1.3.6.1.4.1.89.98.1.2INTEGER {low(1), high(2)}read-writecurrent
rlSnmpEngineID
OBJECT-TYPE
A variable for setting the router's local engineID value. Setting this variable will effect the value of snmpEngineID. Setting this variable to the value '00 00 00 00 00'H will cause snmpEngineID to get an automatically created value based on the device basic MAC address. This method of setting the agent's engineID is recommended for stand-alone systems. Setting this variable to any other (valid) value will set snmpEngineID to this value. Setting this variable to all 'ff'H or all zeros is not allowed, with the exception of the value '00 00 00 00 00'H. The last method is recommended for stackable system, in order for the engineID to be unique within an administrative domain. Setting this value (to a value different then the default value) is required before configuring the usmUserTable. Changing the value of this variable has 2 side-effects: - All usmUserTable configured entries will be deleted. - All snmpCommunityTable entries with snmpCommunityContextEngineID value equal to old rlSnmpEngineID value, will be updated with the new rlSnmpEngineID value.
1.3.6.1.4.1.89.98.1.3OCTET STRING (SIZE(5..32))read-writecurrent
rlSNMPDomains
OBJECT-IDENTITY
1.3.6.1.4.1.89.98.2
rlSnmpUDPMridDomain
OBJECT-IDENTITY
The SNMPv2 over UDP transport domain, used when Multi-Instance Router is supported (more than one MIR instance exist). The corresponding transport address is of type RlSnmpUDPMridAddress.
1.3.6.1.4.1.89.98.2.1current
rlSnmpRequestMridTable
OBJECT-TYPE
A table for determining the Mrid for the current SNMP request.
1.3.6.1.4.1.89.98.3not-accessiblecurrent
rlSnmpRequestMridEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.89.98.3.1not-accessiblecurrent
rlSnmpRequestManagedMrid
OBJECT-TYPE
The router instance the NMS wants to manage in the current SNMP request. The value of this object, when attaching a variable instance of the rlSnmpRequestManagedMridTable to an SNMP request, will determine the managed Mrid for this request. It is important to mention that the variable insance must be attached as the first variable in the PDU in order to influence all variables.
1.3.6.1.4.1.89.98.3.1.1INTEGERread-onlycurrent
rlSnmpRequestMridStatus
OBJECT-TYPE
The status of this entry.
1.3.6.1.4.1.89.98.3.1.2INTEGER {enable(1)}read-writecurrent