MIBs Depot

PNNI-MIB

Registered at
1.3.6.1.4.1.353
Last updated
2002-04-24 00:00
Organization
The ATM Forum
Revisions
2002-04-24 00:00, 1997-03-01 00:00, 1996-02-27 00:00
Namespace
standard
Source file
PNNI-MIB
Digest
sha256:33451f1f8c45dee2e1e4d273df43309f25b0a792d539d1ceaca693104d342c1d

Description

The MIB module for managing ATM Forum PNNI routing.

Contact

The ATM Forum 2570 West El Camino Real, Suite 304 Mountain View, CA 94040-1313 USA Phone: +1 415-949-6700 Fax: +1 415-949-6705 info@atmforum.com

Imports

FromSymbols
ATM-TC-MIBAtmTrafficDescrParamIndex
IF-MIBInterfaceIndex, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso, zeroDotZero
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

5 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-TC-MIB
IANAifType-MIB
IF-MIB
PNNI-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.353.1atmForumAdminATM-FORUM-MIB
1.3.6.1.4.1.353.2atmForumUniATM-FORUM-MIB
1.3.6.1.4.1.353.5atmForumNetworkManagement

Textual conventions

NameOIDSyntaxAccessStatus
AtmAddrPrefix
TEXTUAL-CONVENTION
A prefix of one or more ATM End System Addresses. The significant portion of a prefix is padded with zeros on the right to fill 19 octets.
current
ClpType
TEXTUAL-CONVENTION
Indicates the CLP type of a traffic stream.
current
PnniAggrToken
TEXTUAL-CONVENTION
A PNNI aggregation token - this is used to determine which links to a given neighbor node are to be aggregated and advertised as a single logical link.
current
PnniAtmAddr
TEXTUAL-CONVENTION
The ATM address used by the network entity. The address types are: no address (0 octets), and NSAP (20 octets).
current
PnniHelloState
TEXTUAL-CONVENTION
The state of an instance of the PNNI Hello State machine.
current
PnniLevel
TEXTUAL-CONVENTION
A PNNI routing level indicator.
current
PnniMetricsTag
TEXTUAL-CONVENTION
An index into the pnniMetricsTable. The suffix tag is used to indicate that there may be many related entries in the table further discriminated by other index terms. The distinguished value zero indicates that no metrics are associated with the described entity.
current
PnniNodeId
TEXTUAL-CONVENTION
A PNNI node ID - this is used to identify the logical PNNI node.
current
PnniNodeIndex
TEXTUAL-CONVENTION
An index that identifies a logical PNNI entity within the managed system. The distinguished value zero indicates the null instance or no instance in the PnniNodeCfgParentNodeIndex. In all other cases, the distinguished value zero indicates a logical entity within the switching system that manages routes only over non-PNNI interfaces. By default, only the node identified by node index one is created, and all PNNI interfaces are associated with that node.
current
PnniPeerGroupId
TEXTUAL-CONVENTION
A PNNI peer group ID.
current
PnniPortId
TEXTUAL-CONVENTION
A PNNI port ID - this is used to identify a point of attachment of a logical link to a given logical node. The values 0 and 0xffffffff have special meanings in certain contexts and do not identify a specific port. The distinguished value 0 indicates that no port is specified.
current
PnniPrefixLength
TEXTUAL-CONVENTION
The number of bits that are significant in an ATM address prefix used by PNNI.
current
PnniSvccRccIndex
TEXTUAL-CONVENTION
The value of this object identifies the SVCC-based RCC for which the entry contains management information.
current
PnniVersion
TEXTUAL-CONVENTION
Indicates a version of the PNNI protocol.
current
ServiceCategory
TEXTUAL-CONVENTION
Indicates the service category.
current
TnsPlan
TEXTUAL-CONVENTION
Indicates the network identification plan of a specified transit network.
current
TnsType
TEXTUAL-CONVENTION
Indicates the type of network identification of a specified transit network.
current

Objects

NameOIDSyntaxAccessStatus
atmForum
OBJECT-IDENTITY
1.3.6.1.4.1.353
atmForumNetworkManagement
OBJECT-IDENTITY
1.3.6.1.4.1.353.5
atmfPnni
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.4
pnniMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.4.1.1
pnniBaseGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.4.1.1.1
pnniHighestVersion
OBJECT-TYPE
The highest version of the PNNI protocol that the software in this switching system is capable of executing.
1.3.6.1.4.1.353.5.4.1.1.1.1PnniVersionread-onlycurrent
pnniLowestVersion
OBJECT-TYPE
The lowest version of the PNNI Protocol that the software in this switching system is capable of executing.
1.3.6.1.4.1.353.5.4.1.1.1.2PnniVersionread-onlycurrent
pnniDtlCountOriginator
OBJECT-TYPE
The total number of DTL stacks that this switching system has originated as the DTLOriginator and placed into signalling messages. This includes the initial DTL stacks computed by this system as well as any alternate route (second, third choice etc.) DTL stacks computed by this switching system in response to crankbacks.
1.3.6.1.4.1.353.5.4.1.1.1.3Counter32read-onlycurrent
pnniDtlCountBorder
OBJECT-TYPE
The number of partial DTL stacks that this switching system has added into signalling messages as an entry border node. This includes the initial partial DTL stacks computed by this system as well as any alternate route (second, third choice etc.) partial DTL stacks computed by this switching system in response to crankbacks.
1.3.6.1.4.1.353.5.4.1.1.1.4Counter32read-onlycurrent
pnniCrankbackCountOriginator
OBJECT-TYPE
The count of the total number of connection setup messages including DTL stacks originated by this switching system that have cranked back to this switching system at all levels of the hierarchy.
1.3.6.1.4.1.353.5.4.1.1.1.5Counter32read-onlycurrent
pnniCrankbackCountBorder
OBJECT-TYPE
The count of the total number of connection setup messages including DTLs added by this switching system as an entry border node that have cranked back to this switching system at all levels of the hierarchy. This count does not include Crankbacks for which this switching system was not the crankback destination, only those crankbacks that were directed to this switching system are counted here.
1.3.6.1.4.1.353.5.4.1.1.1.6Counter32read-onlycurrent
pnniAltRouteCountOriginator
OBJECT-TYPE
The total number of alternate DTL stacks that this switching system has computed and placed into signalling messages as the DTLOriginator.
1.3.6.1.4.1.353.5.4.1.1.1.7Counter32read-onlycurrent
pnniAltRouteCountBorder
OBJECT-TYPE
The total number of alternate partial DTL stacks that this switching system has computed and placed into signalling messages as an entry border node.
1.3.6.1.4.1.353.5.4.1.1.1.8Counter32read-onlycurrent
pnniRouteFailCountOriginator
OBJECT-TYPE
The total number of times where the switching system failed to compute a viable DTL stack as the DTLOriginator for some call. It indicates the number of times a call was cleared from this switching system due to originator routing failure.
1.3.6.1.4.1.353.5.4.1.1.1.9Counter32read-onlycurrent
pnniRouteFailCountBorder
OBJECT-TYPE
The total number of times where the switching system failed to compute a viable partial DTL stack as an entry border node for some call. It indicates the number of times a call was either cleared or cranked back from this switching system due to border routing failure.
1.3.6.1.4.1.353.5.4.1.1.1.10Counter32read-onlycurrent
pnniRouteFailUnreachableOriginator
OBJECT-TYPE
The total number of times where the switching system failed to compute a viable DTL stack as the DTLOriginator because the destination was unreachable, i.e., those calls that are cleared with cause #2 `specified transit network unreachable' or cause #3 `destination unreachable' in the cause IE.
1.3.6.1.4.1.353.5.4.1.1.1.11Counter32read-onlycurrent
pnniRouteFailUnreachableBorder
OBJECT-TYPE
The total number of times where the switching system failed to compute a viable partial DTL stack as an entry border node because the target of the path calculation was unreachable, i.e., those calls that are cleared or cranked back with cause #2 `specified transit network unreachable' or cause #3 `destination unreachable' in the cause IE.
1.3.6.1.4.1.353.5.4.1.1.1.12Counter32read-onlycurrent
pnniNodeTable
OBJECT-TYPE
The pnniNodeTable collects attributes that affect the operation of a PNNI logical node. There is a single row in this table for each PNNI peer group that the managed system is expected or eligible to become a member of.
1.3.6.1.4.1.353.5.4.1.1.2not-accessiblecurrent
pnniNodeEntry
OBJECT-TYPE
An entry in the table, containing information about a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.2.1not-accessiblecurrent
pnniNodeIndex
OBJECT-TYPE
A value assigned to a node in this switching system that uniquely identifies it in the MIB.
1.3.6.1.4.1.353.5.4.1.1.2.1.1PnniNodeIndexnot-accessiblecurrent
pnniNodeLevel
OBJECT-TYPE
The level of PNNI hierarchy at which this node exists. This attribute is used to determine the default node ID and the default peer group ID for this node. This object may only be written when pnniNodeAdminStatus has the value down.
1.3.6.1.4.1.353.5.4.1.1.2.1.2PnniLevelread-createcurrent
pnniNodeId
OBJECT-TYPE
The value the switching system is using to represent itself as this node. This object may only be written when pnniNodeAdminStatus has the value down. If pnniNodeLowest is true, then the default node ID takes the form defined in Section 5.3.3 for lowest level nodes, with the first octet equal to pnniNodeLevel, the second octet equal to 160, and the last 20 octets equal to pnniNodeAtmAddress. If pnniNodeLowest is false, then the default node ID takes the form defined in Section 5.3.3 for logical group nodes, with the first octet equal to pnniNodeLevel, the next fourteen octets equal to the value of pnniNodePeerGroupId for the child node whose election as PGL causes this LGN to be instantiated, the next six octets equal to the ESI of pnniNodeAtmAddress, and the last octet equal to zero.
1.3.6.1.4.1.353.5.4.1.1.2.1.3PnniNodeIdread-createcurrent
pnniNodeLowest
OBJECT-TYPE
Indicates whether this node acts as a lowest level node or whether this node is a logical group node that becomes active when one of the other nodes in this switching system becomes a peer group leader. The value 'false' must not be used with nodes that are not PGL/LGN capable. This object may only be written when pnniNodeAdminStatus has the value down.
1.3.6.1.4.1.353.5.4.1.1.2.1.4TruthValueread-createcurrent
pnniNodeAdminStatus
OBJECT-TYPE
Indicates whether the administrative status of the node is up (the node is allowed to become active) or down (the node is forced to be inactive). When pnniNodeAdminStatus is down, then pnniNodeOperStatus must also be down.
1.3.6.1.4.1.353.5.4.1.1.2.1.5INTEGER {up(1), down(2)}read-createcurrent
pnniNodeOperStatus
OBJECT-TYPE
Indicates whether the node is active or whether the node has yet to become operational. When the value is down, all state has been cleared from the node and the node is not communicating with any of its neighbor nodes.
1.3.6.1.4.1.353.5.4.1.1.2.1.6INTEGER {up(1), down(2)}read-onlycurrent
pnniNodeDomainName
OBJECT-TYPE
The name of the PNNI routing domain in which this node participates. All lowest-level PNNI nodes with the same pnniNodeDomainName are presumed to be connected.
1.3.6.1.4.1.353.5.4.1.1.2.1.7DisplayStringread-createcurrent
pnniNodeAtmAddress
OBJECT-TYPE
This node's ATM End System Address. Remote systems wishing to exchange PNNI protocol packets with this node should direct packets or calls to this address. This attribute may only be written when pnniNodeAdminStatus has the value down.
1.3.6.1.4.1.353.5.4.1.1.2.1.8PnniAtmAddrread-createcurrent
pnniNodePeerGroupId
OBJECT-TYPE
The Peer Group Identifier of the peer group that the given node is to become a member of. The default value of this attribute has the first octet equal to pnniNodeLevel, the next pnniNodeLevel bits equal to the pnniNodeLevel bits starting from the third octet of pnniNodeId, and the remainder padded with zeros. This object may only be written when pnniNodeAdminStatus has the value down.
1.3.6.1.4.1.353.5.4.1.1.2.1.9PnniPeerGroupIdread-createcurrent
pnniNodeRestrictedTransit
OBJECT-TYPE
Specifies whether the node is restricted to not allowing support of SVCs transiting this node. This attribute determines the setting of the restricted transit bit in the nodal information group originated by this node.
1.3.6.1.4.1.353.5.4.1.1.2.1.10TruthValueread-createcurrent
pnniNodeComplexRep
OBJECT-TYPE
Specifies whether this node uses the complex node representation. A value of `true' indicates that the complex node representation is used, whereas a value of `false' indicates that the simple node representation is used. This attribute determines the setting of the nodal representation bit in the nodal information group originated by this node.
1.3.6.1.4.1.353.5.4.1.1.2.1.11TruthValueread-createcurrent
pnniNodeRestrictedBranching
OBJECT-TYPE
Indicates whether the node is able to support additional point-to-multipoint branches. A value of 'false' indicates that additional branches can be supported, and a value of 'true' indicates that additional branches cannot be supported. This attribute reflects the setting of the restricted branching bit in the nodal information group originated by this node.
1.3.6.1.4.1.353.5.4.1.1.2.1.12TruthValueread-onlycurrent
pnniNodeDatabaseOverload
OBJECT-TYPE
Specifies whether the node is currently operating in topology database overload state. This attribute has the same value as the Non-transit for PGL Election bit in the nodal information group originated by this node.
1.3.6.1.4.1.353.5.4.1.1.2.1.13TruthValueread-onlycurrent
pnniNodePtses
OBJECT-TYPE
Gauges the total number of PTSEs currently in this node's topology database(s).
1.3.6.1.4.1.353.5.4.1.1.2.1.14Gauge32read-onlycurrent
pnniNodeRowStatus
OBJECT-TYPE
To create, delete, activate and de-activate a Node.
1.3.6.1.4.1.353.5.4.1.1.2.1.15RowStatusread-createcurrent
pnniNodePglTable
OBJECT-TYPE
Peer group leader election information for a PNNI node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.3not-accessiblecurrent
pnniNodePglEntry
OBJECT-TYPE
An entry in the table, containing PGL election information of a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.3.1not-accessiblecurrent
pnniNodePglLeadershipPriority
OBJECT-TYPE
The Leadership priority value this node should advertise in its nodal information group for the given peer group. Only the value zero can be used with nodes that are not PGL/LGN capable. If there is no configured parent node index or no corresponding entry in the pnniNodeTable, then the advertised leadership priority is zero regardless of this value.
1.3.6.1.4.1.353.5.4.1.1.3.1.1INTEGER (0..205)read-createcurrent
pnniNodeCfgParentNodeIndex
OBJECT-TYPE
The local node index used to identify the node that will represent this peer group at the next higher level of hierarchy, if this node becomes peer group leader. The value 0 indicates that there is no parent node.
1.3.6.1.4.1.353.5.4.1.1.3.1.2PnniNodeIndexread-createcurrent
pnniNodePglInitTime
OBJECT-TYPE
The amount of time in seconds this node will delay advertising its choice of preferred PGL after having initialized operation and reached the full state with at least one neighbor in the peer group.
1.3.6.1.4.1.353.5.4.1.1.3.1.3Integer32read-createcurrent
pnniNodePglOverrideDelay
OBJECT-TYPE
The amount of time in seconds a node will wait for itself to be declared the preferred PGL by unanimous agreement among its peers. In the absence of unanimous agreement this will be the amount of time that will pass before this node considers a two thirds majority as sufficient agreement to declare itself peer group leader, abandoning the attempt to get unanimous agreement.
1.3.6.1.4.1.353.5.4.1.1.3.1.4Integer32read-createcurrent
pnniNodePglReelectTime
OBJECT-TYPE
The amount of time in seconds after losing connectivity to the current peer group leader, that this node will wait before re-starting the process of electing a new peer group leader.
1.3.6.1.4.1.353.5.4.1.1.3.1.5Integer32read-createcurrent
pnniNodePglState
OBJECT-TYPE
Indicates the state that this node is in with respect to the Peer Group Leader election that takes place in the node's peer group. The values are enumerated in the Peer Group Leader State Machine.
1.3.6.1.4.1.353.5.4.1.1.3.1.6INTEGER {starting(1), awaiting(2), awaitingFull(3), initialDelay(4), calculating(5), awaitUnanimity(6), operPgl(7), operNotPgl(8), hungElection(9), awaitReElection(10)}read-onlycurrent
pnniNodePreferredPgl
OBJECT-TYPE
The Node ID of the node which the local node believes should be or become the peer group leader. This is also the value the local node is currently advertising in the `Preferred Peer Group Leader Node ID' field of its nodal information group within the given peer group. If a Preferred PGL has not been chosen, this attribute's value is set to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.3.1.7PnniNodeIdread-onlycurrent
pnniNodePeerGroupLeader
OBJECT-TYPE
The Node Identifier of the node which is currently operating as peer group leader of the peer group this node belongs to. If a PGL has not been elected, this attribute's value is set to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.3.1.8PnniNodeIdread-onlycurrent
pnniNodePglTimeStamp
OBJECT-TYPE
The time at which the current Peer Group Leader established itself.
1.3.6.1.4.1.353.5.4.1.1.3.1.9TimeStampread-onlycurrent
pnniNodeActiveParentNodeId
OBJECT-TYPE
The Node Identifier value being used by the Peer Group Leader to represent this peer group at the next higher level of the hierarchy. If this node is at the highest level of the hierarchy or if no PGL has yet been elected the PNNI Protocol Entity sets the value of this attribute to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.3.1.10PnniNodeIdread-onlycurrent
pnniNodeTimerTable
OBJECT-TYPE
A table of initial PNNI timer values and significant change thresholds.
1.3.6.1.4.1.353.5.4.1.1.4not-accessiblecurrent
pnniNodeTimerEntry
OBJECT-TYPE
An entry in the table, containing initial PNNI timer values and significant change thresholds of a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.4.1not-accessiblecurrent
pnniNodePtseHolddown
OBJECT-TYPE
The initial value for the PTSE hold down timer that will be used by the given node to limit the rate at which it can re-originate PTSEs. It must be a positive non-zero number.
1.3.6.1.4.1.353.5.4.1.1.4.1.1Integer32read-createcurrent
pnniNodeHelloHolddown
OBJECT-TYPE
The initial value for the Hello hold down timer that will be used by the given node to limit the rate at which it sends Hellos. It must be a positive non-zero number.
1.3.6.1.4.1.353.5.4.1.1.4.1.2Integer32read-createcurrent
pnniNodeHelloInterval
OBJECT-TYPE
The initial value for the Hello Timer. In the absence of triggered Hellos, this node will send one Hello packet on each of its ports on this interval.
1.3.6.1.4.1.353.5.4.1.1.4.1.3Integer32read-createcurrent
pnniNodeHelloInactivityFactor
OBJECT-TYPE
The value for the Hello Inactivity factor that this node will use to determine when a neighbor has gone down.
1.3.6.1.4.1.353.5.4.1.1.4.1.4Integer32read-createcurrent
pnniNodeHlinkInact
OBJECT-TYPE
The amount of time a node will continue to advertise a horizontal (logical) link for which it has not received and processed a LGN Horizontal Link information group.
1.3.6.1.4.1.353.5.4.1.1.4.1.5Integer32read-createcurrent
pnniNodePtseRefreshInterval
OBJECT-TYPE
The initial value for the Refresh timer that this node will use to drive (re-)origination of PTSEs in the absence of triggered updates.
1.3.6.1.4.1.353.5.4.1.1.4.1.6Integer32read-createcurrent
pnniNodePtseLifetimeFactor
OBJECT-TYPE
The value for the lifetime multiplier, expressed as a percentage. The result of multiplying the pnniNodePtseRefreshInterval attribute value by this attribute value is used as the initial lifetime that this node places into self-originated PTSEs.
1.3.6.1.4.1.353.5.4.1.1.4.1.7INTEGER (101..1000)read-createcurrent
pnniNodeRxmtInterval
OBJECT-TYPE
The period between retransmissions of unacknowledged Database Summary packets, PTSE Request packets, and PTSPs.
1.3.6.1.4.1.353.5.4.1.1.4.1.8Integer32read-createcurrent
pnniNodePeerDelayedAckInterval
OBJECT-TYPE
The minimum amount of time between transmissions of delayed PTSE acknowledgement packets.
1.3.6.1.4.1.353.5.4.1.1.4.1.9Integer32read-createcurrent
pnniNodeAvcrPm
OBJECT-TYPE
The proportional multiplier used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage.
1.3.6.1.4.1.353.5.4.1.1.4.1.10INTEGER (1..99)read-createcurrent
pnniNodeAvcrMt
OBJECT-TYPE
The minimum threshold used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage.
1.3.6.1.4.1.353.5.4.1.1.4.1.11INTEGER (1..99)read-createcurrent
pnniNodeCdvPm
OBJECT-TYPE
The proportional multiplier used in the algorithms that determine significant change for CDV metrics, expressed as a percentage.
1.3.6.1.4.1.353.5.4.1.1.4.1.12INTEGER (1..99)read-createcurrent
pnniNodeCtdPm
OBJECT-TYPE
The proportional multiplier used in the algorithms that determine significant change for CTD metrics, expressed as a percentage.
1.3.6.1.4.1.353.5.4.1.1.4.1.13INTEGER (1..99)read-createcurrent
pnniNodeSvccTable
OBJECT-TYPE
A table of variables related to SVCC-based routing control channels.
1.3.6.1.4.1.353.5.4.1.1.5not-accessiblecurrent
pnniNodeSvccEntry
OBJECT-TYPE
An entry in the table, containing SVCC-based RCC variables of a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.5.1not-accessiblecurrent
pnniNodeSvccInitTime
OBJECT-TYPE
The amount of time this node will delay initiating establishment of an SVCC to a neighbor with a numerically lower ATM address, after determining that such an SVCC should be established.
1.3.6.1.4.1.353.5.4.1.1.5.1.1Integer32read-createcurrent
pnniNodeSvccRetryTime
OBJECT-TYPE
The amount of time this node will delay after an apparently still necessary and viable SVCC-based RCC is unexpectedly torn down, before attempting to re-establish it.
1.3.6.1.4.1.353.5.4.1.1.5.1.2Integer32read-createcurrent
pnniNodeSvccCallingIntegrityTime
OBJECT-TYPE
The amount of time this node will wait for an SVCC, which it has initiated establishment of as the calling party, to become fully established before giving up and tearing it down.
1.3.6.1.4.1.353.5.4.1.1.5.1.3Integer32read-createcurrent
pnniNodeSvccCalledIntegrityTime
OBJECT-TYPE
The amount of time this node will wait for an SVCC, which it has decided to accept as the called party, to become fully established before giving up and tearing it down.
1.3.6.1.4.1.353.5.4.1.1.5.1.4Integer32read-createcurrent
pnniNodeSvccTrafficDescriptorIndex
OBJECT-TYPE
An index into the atmTrafficDescrParamTable defined in RFC 1695. This traffic descriptor is used when establishing switched virtual channels for use as SVCC-based RCCs to/from PNNI logical group nodes.
1.3.6.1.4.1.353.5.4.1.1.5.1.5AtmTrafficDescrParamIndexread-createcurrent
pnniScopeMappingTable
OBJECT-TYPE
The pnniScopeTable contains the mappings of membership and connection scope from organizational scope values (used at UNI interfaces) to PNNI scope (i.e. in terms of PNNI routing level indicators).
1.3.6.1.4.1.353.5.4.1.1.6not-accessiblecurrent
pnniScopeMappingEntry
OBJECT-TYPE
An entry in the table, containing scope mapping information for a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.6.1not-accessiblecurrent
pnniScopeLocalNetwork
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetwork(1).
1.3.6.1.4.1.353.5.4.1.1.6.1.1PnniLevelread-createcurrent
pnniScopeLocalNetworkPlusOne
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetworkPlusOne(2).
1.3.6.1.4.1.353.5.4.1.1.6.1.2PnniLevelread-createcurrent
pnniScopeLocalNetworkPlusTwo
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetworkPlusTwo(3).
1.3.6.1.4.1.353.5.4.1.1.6.1.3PnniLevelread-createcurrent
pnniScopeSiteMinusOne
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value siteMinusOne(4).
1.3.6.1.4.1.353.5.4.1.1.6.1.4PnniLevelread-createcurrent
pnniScopeIntraSite
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraSite(5).
1.3.6.1.4.1.353.5.4.1.1.6.1.5PnniLevelread-createcurrent
pnniScopeSitePlusOne
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value sitePlusOne(6).
1.3.6.1.4.1.353.5.4.1.1.6.1.6PnniLevelread-createcurrent
pnniScopeOrganizationMinusOne
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value organizationMinusOne(7).
1.3.6.1.4.1.353.5.4.1.1.6.1.7PnniLevelread-createcurrent
pnniScopeIntraOrganization
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraOrganization(8).
1.3.6.1.4.1.353.5.4.1.1.6.1.8PnniLevelread-createcurrent
pnniScopeOrganizationPlusOne
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value organizationPlusOne(9).
1.3.6.1.4.1.353.5.4.1.1.6.1.9PnniLevelread-createcurrent
pnniScopeCommunityMinusOne
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value communityMinusOne(10).
1.3.6.1.4.1.353.5.4.1.1.6.1.10PnniLevelread-createcurrent
pnniScopeIntraCommunity
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraCommunity(11).
1.3.6.1.4.1.353.5.4.1.1.6.1.11PnniLevelread-createcurrent
pnniScopeCommunityPlusOne
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value communityPlusOne(12).
1.3.6.1.4.1.353.5.4.1.1.6.1.12PnniLevelread-createcurrent
pnniScopeRegional
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value regional(13).
1.3.6.1.4.1.353.5.4.1.1.6.1.13PnniLevelread-createcurrent
pnniScopeInterRegional
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value interRegional(14).
1.3.6.1.4.1.353.5.4.1.1.6.1.14PnniLevelread-createcurrent
pnniScopeGlobal
OBJECT-TYPE
The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value global(15).
1.3.6.1.4.1.353.5.4.1.1.6.1.15PnniLevelread-createcurrent
pnniSummaryTable
OBJECT-TYPE
A list of the summary address prefixes that may be advertised by the specified logical PNNI entity.
1.3.6.1.4.1.353.5.4.1.1.7not-accessibledeprecated
pnniSummaryEntry
OBJECT-TYPE
An entry in the table, containing summary address prefix information in this switching system.
1.3.6.1.4.1.353.5.4.1.1.7.1not-accessibledeprecated
pnniSummaryAddress
OBJECT-TYPE
The ATM End System Address prefix for the summary.
1.3.6.1.4.1.353.5.4.1.1.7.1.1AtmAddrPrefixnot-accessibledeprecated
pnniSummaryPrefixLength
OBJECT-TYPE
The prefix length for the summary.
1.3.6.1.4.1.353.5.4.1.1.7.1.2PnniPrefixLengthnot-accessibledeprecated
pnniSummaryType
OBJECT-TYPE
The type (e.g. internal or exterior) of summary being described.
1.3.6.1.4.1.353.5.4.1.1.7.1.3INTEGER {internal(1), exterior(2)}read-createdeprecated
pnniSummarySuppress
OBJECT-TYPE
Determines what is done with addresses that are being summarized by the instance. The default value (e.g. false) will indicate that the summary should propagate into the peer group. Network Management will be able to set the value of this attribute to `suppress' (e.g. true), which suppresses the summary and any reachable addresses it summarizes from being advertised into the peer group.
1.3.6.1.4.1.353.5.4.1.1.7.1.4TruthValueread-createdeprecated
pnniSummaryState
OBJECT-TYPE
Indicates whether the summary is currently being advertised by the node within the local switching system into its peer group.
1.3.6.1.4.1.353.5.4.1.1.7.1.5INTEGER {advertising(1), suppressing(2), inactive(3)}read-onlydeprecated
pnniSummaryRowStatus
OBJECT-TYPE
To create, delete, activate and de-activate a summary.
1.3.6.1.4.1.353.5.4.1.1.7.1.6RowStatusread-createdeprecated
pnniIfTable
OBJECT-TYPE
The pnniIfTable contains the attributes necessary to configure a physical interface on a switching system which is capable of being used for PNNI routing. Interfaces may represent physical connection points (i.e. copper/fiber connection points) or VPCs which have been configured for PNNI's use. Each interface is attached to a specific lowest-level node within the switching system. An ifIndex is used as the instance ID to uniquely identify the interface on the local switching system. This index has the same value as the ifIndex object defined in RFC 1573 for the same interface, since this table correlates with the ifTable in RFC 1573. One row in this table is created by the managed system for each row in the ifTable that has an ifType of atm(37) or atmLogical(80).
1.3.6.1.4.1.353.5.4.1.1.8not-accessiblecurrent
pnniIfEntry
OBJECT-TYPE
An entry in the table, containing PNNI specific interface information in this switching system.
1.3.6.1.4.1.353.5.4.1.1.8.1not-accessiblecurrent
pnniIfNodeIndex
OBJECT-TYPE
Identifies the node within the switching system that the interface is directly attached to. The value zero is not a valid value.
1.3.6.1.4.1.353.5.4.1.1.8.1.1PnniNodeIndex (1..65535)read-writecurrent
pnniIfPortId
OBJECT-TYPE
The Port Identifier of the port as selected by the PNNI protocol entity for the given interface. This value has meaning only within the context of the node to which the port is attached. The distinguished value zero indicates that no PNNI Port Identifier has been assigned for this interface (for example, this value may be used when the interface is not running PNNI).
1.3.6.1.4.1.353.5.4.1.1.8.1.2PnniPortIdread-onlycurrent
pnniIfAggrToken
OBJECT-TYPE
The configured aggregation token for this interface. The aggregation token controls what other links the link associated with this interface will be aggregated together with.
1.3.6.1.4.1.353.5.4.1.1.8.1.3PnniAggrTokenread-writecurrent
pnniIfVPCapability
OBJECT-TYPE
Indicates whether the interface is capable of having VPCs established within it or not. This object may only have the value `true' for physical ATM interfaces, i.e. those with an ifType of atm(37).
1.3.6.1.4.1.353.5.4.1.1.8.1.4TruthValueread-writecurrent
pnniIfAdmWeightCbr
OBJECT-TYPE
The administrative weight of this interface for the constant bit rate service category.
1.3.6.1.4.1.353.5.4.1.1.8.1.5Unsigned32 (1..16777215)read-writecurrent
pnniIfAdmWeightRtVbr
OBJECT-TYPE
The administrative weight of this interface for the real-time variable bit rate service category.
1.3.6.1.4.1.353.5.4.1.1.8.1.6Unsigned32 (1..16777215)read-writecurrent
pnniIfAdmWeightNrtVbr
OBJECT-TYPE
The administrative weight of this interface for the non-real-time variable bit rate service category.
1.3.6.1.4.1.353.5.4.1.1.8.1.7Unsigned32 (1..16777215)read-writecurrent
pnniIfAdmWeightAbr
OBJECT-TYPE
The administrative weight of this interface for the available bit rate service category.
1.3.6.1.4.1.353.5.4.1.1.8.1.8Unsigned32 (1..16777215)read-writecurrent
pnniIfAdmWeightUbr
OBJECT-TYPE
The administrative weight of this interface for the unspecified bit rate service category.
1.3.6.1.4.1.353.5.4.1.1.8.1.9Unsigned32 (1..16777215)read-writecurrent
pnniIfRccServiceCategory
OBJECT-TYPE
The service category used for the PNNI routing control channel (VCI=18) on this interface.
1.3.6.1.4.1.353.5.4.1.1.8.1.10ServiceCategoryread-writecurrent
pnniIfRccTrafficDescrIndex
OBJECT-TYPE
The traffic descriptor index referring to the entry in the atmTrafficDescrParamTable defined in RFC 1695 that specifies the traffic allocation for the PNNI routing control channel (VCI=18) on this interface.
1.3.6.1.4.1.353.5.4.1.1.8.1.11AtmTrafficDescrParamIndexread-writecurrent
pnniLinkTable
OBJECT-TYPE
This table contains the attributes necessary to describe the operation of logical links attached to the local switching system and the relationship with the neighbor nodes on the other end of the links. Links are attached to a specific node within the switching system. A concatenation of the Node Index of the node within the local switching system and the port ID are used as the instance ID to uniquely identify the link. Links may represent horizontal links between lowest level neighboring peers, outside links, uplinks, or horizontal links to/from LGNs. The entire pnniLink object is read-only, reflecting the fact that this information is discovered dynamically by the PNNI protocol rather than configured.
1.3.6.1.4.1.353.5.4.1.1.9not-accessiblecurrent
pnniLinkEntry
OBJECT-TYPE
An entry in the table, containing information about a link attached to a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.9.1not-accessiblecurrent
pnniLinkPortId
OBJECT-TYPE
The Port Identifier of the link as selected by the local node. This value has meaning only within the context of the node to which the port is attached.
1.3.6.1.4.1.353.5.4.1.1.9.1.1PnniPortIdnot-accessiblecurrent
pnniLinkType
OBJECT-TYPE
Indicates the type of link being described.
1.3.6.1.4.1.353.5.4.1.1.9.1.2INTEGER {unknown(1), lowestLevelHorizontalLink(2), horizontalLinkToFromLgn(3), lowestLevelOutsideLink(4), uplink(5), outsideLinkAndUplink(6)}read-onlycurrent
pnniLinkVersion
OBJECT-TYPE
For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute indicates the version of PNNI routing protocol used to exchange information over this link. If communication with the neighbor node has not yet been established, then the Version is set to `unknown'. For uplinks (where the port ID is not also used for the underlying outside link) or links to/from LGNs, the Version is set to `unknown'.
1.3.6.1.4.1.353.5.4.1.1.9.1.3PnniVersionread-onlycurrent
pnniLinkHelloState
OBJECT-TYPE
For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute indicates the state of the Hello protocol exchange over this link. For links to/from LGNs, this attribute indicates the state of the corresponding LGN Horizontal Link Hello State Machine. For uplinks (where the port ID is not also used for the underlying outside link), this attribute is set to notApplicable.
1.3.6.1.4.1.353.5.4.1.1.9.1.4PnniHelloStateread-onlycurrent
pnniLinkRemoteNodeId
OBJECT-TYPE
Indicates the node identifier of the remote (neighboring) node on the other end of the link. If the pnniLinkType is `outside link and uplink', this is the node identifier of the lowest-level neighbor node on the other end of the outside link. If the remote node ID is unknown or if the pnniLinkType is `uplink', this attribute is set to all zeros.
1.3.6.1.4.1.353.5.4.1.1.9.1.5PnniNodeIdread-onlycurrent
pnniLinkRemotePortId
OBJECT-TYPE
Indicates the port identifier of the port at the remote end of the link as assigned by the remote node. If the pnniLinkType is `outside link and uplink', this is the port identifier assigned by the lowest-level neighbor node to identify the outside link. If the remote port ID is unknown or if the pnniLinkType is `uplink', this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.9.1.6PnniPortIdread-onlycurrent
pnniLinkDerivedAggrToken
OBJECT-TYPE
Indicates the derived aggregation token value used on this link. For horizontal links between lowest-level nodes and when the link type is not yet known, this attribute takes the value of zero.
1.3.6.1.4.1.353.5.4.1.1.9.1.7PnniAggrTokenread-onlycurrent
pnniLinkUpnodeId
OBJECT-TYPE
For outside links and uplinks, this attribute contains the Node Identifier of the upnode (the neighbor node's identity at the level of the common peer group). When the upnode has not yet been identified, this attribute is set to zero. For horizontal links or when the link type is not yet known, this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.9.1.8PnniNodeIdread-onlycurrent
pnniLinkUpnodeAtmAddress
OBJECT-TYPE
For outside links and uplinks, this attribute contains the ATM End System Address used to establish connections to the upnode. When the upnode has not yet been identified, this attribute is set to zero. For horizontal links or when the link type is not yet known, this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.9.1.9PnniAtmAddrread-onlycurrent
pnniLinkCommonPeerGroupId
OBJECT-TYPE
For outside links and uplinks, this attribute contains the peer group identifier of the lowest level common Peer Group in the ancestry of the neighboring node and the node within the local switching system. The value of this attribute takes on a value determined by the Hello exchange of hierarchical information that occurs between the two lowest-level border nodes. When the common peer group has not yet been identified, this attribute is set to zero. For horizontal links or when the link type is not yet known, this attribute is set to all zeros.
1.3.6.1.4.1.353.5.4.1.1.9.1.10PnniPeerGroupIdread-onlycurrent
pnniLinkIfIndex
OBJECT-TYPE
For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute identifies the interface to which the logical link corresponds. For all other cases, the value of this object is zero.
1.3.6.1.4.1.353.5.4.1.1.9.1.11InterfaceIndexread-onlycurrent
pnniLinkSvccRccIndex
OBJECT-TYPE
For horizontal links to/from LGNs, this attribute identifies the SVCC-based RCC used to exchange information with the neighboring peer logical group node. If the pnniLinkType is not `horizontal link to/from LGN', this attribute shall take the value of zero.
1.3.6.1.4.1.353.5.4.1.1.9.1.12PnniSvccRccIndexread-onlycurrent
pnniLinkRcvHellos
OBJECT-TYPE
For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute contains a count of the number of Hello Packets received over this link. If the pnniLinkType is `horizontal link to/from LGN' or `uplink', this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.9.1.13Counter32read-onlycurrent
pnniLinkXmtHellos
OBJECT-TYPE
For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute contains a count of the number of Hello Packets transmitted over this link. If the pnniLinkType is `horizontal link to/from LGN' or `uplink', this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.9.1.14Counter32read-onlycurrent
pnniNbrPeerTable
OBJECT-TYPE
The pnniNbrPeer Object contains all the attributes necessary to describe the relationship a node in this switching system has with a neighboring node within the same peer group. A concatenation of the Node Identifier of the node within the local switching system and the neighboring peer's Node Identifier is used to form the instance ID for this object. The entire pnniNbrPeer object is read-only, reflecting the fact that neighboring peers are discovered dynamically by the PNNI protocol rather than configured.
1.3.6.1.4.1.353.5.4.1.1.10not-accessiblecurrent
pnniNbrPeerEntry
OBJECT-TYPE
An entry in the table, containing information about this node's relationship with a neighboring peer node.
1.3.6.1.4.1.353.5.4.1.1.10.1not-accessiblecurrent
pnniNbrPeerRemoteNodeId
OBJECT-TYPE
The Node Identifier of the neighboring peer node.
1.3.6.1.4.1.353.5.4.1.1.10.1.1PnniNodeIdnot-accessiblecurrent
pnniNbrPeerState
OBJECT-TYPE
Indicates the state of this node's Neighboring Peer State Machine associated with pnniNbrPeerRemoteNodeId.
1.3.6.1.4.1.353.5.4.1.1.10.1.2INTEGER {npdown(1), negotiating(2), exchanging(3), loading(4), full(5)}read-onlycurrent
pnniNbrPeerSvccRccIndex
OBJECT-TYPE
Identifies the SVCC-based RCC being used to communicate with the neighboring peer if one exists. If both the local node and the neighboring peer node are lowest-level nodes, this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.10.1.3PnniSvccRccIndexread-onlycurrent
pnniNbrPeerPortCount
OBJECT-TYPE
A count of the total number of ports that connect to the neighboring peer. If the neighboring peer only communicates via an SVCC-based RCC, the value of this attribute is set to zero. Otherwise it is set to the total number of ports to the neighboring peer in the Hello state 2-WayInside.
1.3.6.1.4.1.353.5.4.1.1.10.1.4Gauge32read-onlycurrent
pnniNbrPeerRcvDbSums
OBJECT-TYPE
A count of the number of Database Summary Packets received from the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.10.1.5Counter32read-onlycurrent
pnniNbrPeerXmtDbSums
OBJECT-TYPE
A count of the number of Database Summary Packets transmitted to the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.10.1.6Counter32read-onlycurrent
pnniNbrPeerRcvPtsps
OBJECT-TYPE
A count of the number of PTSPs received from the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.10.1.7Counter32read-onlycurrent
pnniNbrPeerXmtPtsps
OBJECT-TYPE
A count of the number of PTSPs (re)transmitted to the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.10.1.8Counter32read-onlycurrent
pnniNbrPeerRcvPtseReqs
OBJECT-TYPE
A count of the number of PTSE Request packets received from the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.10.1.9Counter32read-onlycurrent
pnniNbrPeerXmtPtseReqs
OBJECT-TYPE
A count of the number of PTSE Request packets transmitted to the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.10.1.10Counter32read-onlycurrent
pnniNbrPeerRcvPtseAcks
OBJECT-TYPE
A count of the number of PTSE Ack packets received from the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.10.1.11Counter32read-onlycurrent
pnniNbrPeerXmtPtseAcks
OBJECT-TYPE
A count of the number of PTSE Ack packets transmitted to the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.10.1.12Counter32read-onlycurrent
pnniNbrPeerPortTable
OBJECT-TYPE
A table of all ports in Hello state 2-Way Inside to a given neighboring peer node. A concatenation of the Node Index of the node within the local switching system, the neighbor's Node Identifier and the Interface Index of the port being described forms the instance ID for this object. This object is only used for lowest-level nodes.
1.3.6.1.4.1.353.5.4.1.1.11not-accessiblecurrent
pnniNbrPeerPortEntry
OBJECT-TYPE
An entry in the table, containing information about a port in the Hello state 2-Way Inside from a PNNI logical node in this switching system to a neighboring peer node.
1.3.6.1.4.1.353.5.4.1.1.11.1not-accessiblecurrent
pnniNbrPeerPortId
OBJECT-TYPE
The port ID of a port to the neighboring peer that is in the Hello state 2-Way Inside.
1.3.6.1.4.1.353.5.4.1.1.11.1.1PnniPortIdnot-accessiblecurrent
pnniNbrPeerPortFloodStatus
OBJECT-TYPE
Indicates whether the port is being used for transmission of flooding and database synchronization information to the neighboring peer.
1.3.6.1.4.1.353.5.4.1.1.11.1.2TruthValueread-onlycurrent
pnniSvccRccTable
OBJECT-TYPE
A table containing the attributes necessary to analyze the operation of the PNNI protocol on SVCC-based Routing Control Channels. This entire object is read-only, reflecting the fact that SVCC-based RCCs are established dynamically during operation of the PNNI protocol rather than configured.
1.3.6.1.4.1.353.5.4.1.1.12not-accessiblecurrent
pnniSvccRccEntry
OBJECT-TYPE
An entry in the table, containing information about an SVCC-based RCC from a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.12.1not-accessiblecurrent
pnniSvccRccIndex
OBJECT-TYPE
An index into the node's tables of SVCC-based RCCs.
1.3.6.1.4.1.353.5.4.1.1.12.1.1PnniSvccRccIndexnot-accessiblecurrent
pnniSvccRccVersion
OBJECT-TYPE
The version of the PNNI routing protocol used to exchange information with the neighbor node.
1.3.6.1.4.1.353.5.4.1.1.12.1.2PnniVersionread-onlycurrent
pnniSvccRccHelloState
OBJECT-TYPE
The state of the Hello protocol exchange over the SVCC-based RCC. Note: the Down state indicates that the SVCC establishment is in progress.
1.3.6.1.4.1.353.5.4.1.1.12.1.3PnniHelloStateread-onlycurrent
pnniSvccRccRemoteNodeId
OBJECT-TYPE
The remote node at which the SVCC-based RCC terminates.
1.3.6.1.4.1.353.5.4.1.1.12.1.4PnniNodeIdread-onlycurrent
pnniSvccRccRemoteAtmAddress
OBJECT-TYPE
The ATM End System Address to which SVCC establishment is attempted.
1.3.6.1.4.1.353.5.4.1.1.12.1.5PnniAtmAddrread-onlycurrent
pnniSvccRccRcvHellos
OBJECT-TYPE
A count of the number of Hello Packets received over this SVCC-based RCC.
1.3.6.1.4.1.353.5.4.1.1.12.1.6Counter32read-onlycurrent
pnniSvccRccXmtHellos
OBJECT-TYPE
A count of the number of Hello Packets transmitted over this SVCC-based RCC.
1.3.6.1.4.1.353.5.4.1.1.12.1.7Counter32read-onlycurrent
pnniSvccRccIfIndex
OBJECT-TYPE
The interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zero.
1.3.6.1.4.1.353.5.4.1.1.12.1.8InterfaceIndexread-onlycurrent
pnniSvccRccVpi
OBJECT-TYPE
The VPI used at the interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zero
1.3.6.1.4.1.353.5.4.1.1.12.1.9INTEGER (0..4095)read-onlycurrent
pnniSvccRccVci
OBJECT-TYPE
The VCI used at the interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zero
1.3.6.1.4.1.353.5.4.1.1.12.1.10INTEGER (0..65535)read-onlycurrent
pnniPtseTable
OBJECT-TYPE
The pnniPtse object contains the attributes that describe the most recent instances of PTSEs in a node's topology database. A concatenation of the Node Identifier of the local node that received the PTSE, the originating Node's Node Identifier and the PTSE Identifier are used to form the instance ID for an instance of this object.
1.3.6.1.4.1.353.5.4.1.1.13not-accessiblecurrent
pnniPtseEntry
OBJECT-TYPE
An entry in the table, containing information about a PTSE in the topology database of a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.13.1not-accessiblecurrent
pnniPtseOriginatingNodeId
OBJECT-TYPE
The Node Identifier of the node that originated the PTSE.
1.3.6.1.4.1.353.5.4.1.1.13.1.1PnniNodeIdnot-accessiblecurrent
pnniPtseId
OBJECT-TYPE
The value of the PTSE Identifier assigned to the PTSE by its originator.
1.3.6.1.4.1.353.5.4.1.1.13.1.2Unsigned32not-accessiblecurrent
pnniPtseType
OBJECT-TYPE
The type of information contained in the PTSE.
1.3.6.1.4.1.353.5.4.1.1.13.1.3INTEGER {other(1), nodalStateParameters(96), nodalInformation(97), internalReachableAddresses(224), exteriorReachableAddresses(256), horizontalLinks(288), uplinks(289)}read-onlycurrent
pnniPtseSequenceNum
OBJECT-TYPE
The sequence number of the instance of the PTSE as it appears in the local topology database.
1.3.6.1.4.1.353.5.4.1.1.13.1.4Unsigned32read-onlycurrent
pnniPtseChecksum
OBJECT-TYPE
The value of the PTSE checksum as it appears in the local topology database.
1.3.6.1.4.1.353.5.4.1.1.13.1.5Unsigned32 (0..65535)read-onlycurrent
pnniPtseLifeTime
OBJECT-TYPE
The value of the remaining lifetime for the given PTSE as it appears in the local topology database.
1.3.6.1.4.1.353.5.4.1.1.13.1.6Unsigned32 (0..65535)read-onlycurrent
pnniPtseInfo
OBJECT-TYPE
An unformatted hexadecimal dump of the PTSE contents in full. Note: If the size of the PTSE contents is larger than the maximum size of SNMP packets then this is truncated.
1.3.6.1.4.1.353.5.4.1.1.13.1.7OCTET STRING (SIZE(0..65535))read-onlycurrent
pnniMapTable
OBJECT-TYPE
A table containing attributes necessary to find and analyze the operation of all links and nodes within the PNNI hierarchy, as seen from the perspective of a local node. An instance of a pnniMap Object describes a link in terms of a node at one end of the link. Normally there will be two instances of the pnniMap object in the MIB for each horizontal link. The two instances provide information for Network management to map port identifiers from the nodes at both ends to the link between them. A concatenation of the Local Node Index, Originating Node Identifier and Originating Port Identifier are used to form the instance ID for this object. This entire object is read-only, reflecting the fact that the map is discovered dynamically during operation of the PNNI protocol rather than configured.
1.3.6.1.4.1.353.5.4.1.1.14not-accessiblecurrent
pnniMapEntry
OBJECT-TYPE
An entry in the table, containing connectivity information about a node or link in the PNNI routing domain, as seen from the perspective of a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.14.1not-accessiblecurrent
pnniMapOriginatingNodeId
OBJECT-TYPE
The node identifier of the node whose connectivity within itself or to other nodes is being described.
1.3.6.1.4.1.353.5.4.1.1.14.1.1PnniNodeIdnot-accessiblecurrent
pnniMapOriginatingPortId
OBJECT-TYPE
The port identifier of the port as assigned by the originating node, to which the port is attached.
1.3.6.1.4.1.353.5.4.1.1.14.1.2PnniPortIdnot-accessiblecurrent
pnniMapIndex
OBJECT-TYPE
An index into the set of link and nodal connectivity associated with the originating node and port. This index is needed since there may be multiple entries for nodal connectivity from a specific node and port pair, in addition to any entry for a horizontal link or uplink.
1.3.6.1.4.1.353.5.4.1.1.14.1.3INTEGER (0..65535)not-accessiblecurrent
pnniMapType
OBJECT-TYPE
The type of PNNI entity being described by this entry in the table.
1.3.6.1.4.1.353.5.4.1.1.14.1.4INTEGER {horizontalLink(1), uplink(2), node(3)}read-onlycurrent
pnniMapPeerGroupId
OBJECT-TYPE
Identifies the peer group of the originating node.
1.3.6.1.4.1.353.5.4.1.1.14.1.5PnniPeerGroupIdread-onlycurrent
pnniMapAggrToken
OBJECT-TYPE
For horizontal links to/from LGNs and for uplinks, this attribute contains the derived aggregation token value for this link. For nodes and for horizontal links between lowest-level nodes, this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.14.1.6PnniAggrTokenread-onlycurrent
pnniMapRemoteNodeId
OBJECT-TYPE
For horizontal links and uplinks, this attribute contains the node identifier of the node at the other end of the link from the originating node. If unknown, the PNNI protocol entity sets this attribute's value to (all) zero(s). For nodes, this attribute's value is set to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.14.1.7PnniNodeIdread-onlycurrent
pnniMapRemotePortId
OBJECT-TYPE
For horizontal links and uplinks, this attribute contains the port identifier of the port at the remote end of the link as assigned by the remote node. If unknown, the PNNI protocol entity sets this attribute's value to zero. For nodes, this attribute contains the port identifier of the port at the other end of the spoke or bypass from the originating port. When the originating port ID is zero, a value of zero indicates the default radius. When the originating port ID is non-zero, a value of zero indicates the nodal nucleus.
1.3.6.1.4.1.353.5.4.1.1.14.1.8PnniPortIdread-onlycurrent
pnniMapVPCapability
OBJECT-TYPE
Indicates whether VPCs can be established across the PNNI entity being described by this entry in the pnniMapTable.
1.3.6.1.4.1.353.5.4.1.1.14.1.9TruthValueread-onlycurrent
pnniMapPtseId
OBJECT-TYPE
The value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the PNNI entity.
1.3.6.1.4.1.353.5.4.1.1.14.1.10Unsigned32read-onlycurrent
pnniMapMetricsTag
OBJECT-TYPE
An arbitrary integer that is used to associate a set of traffic parameters that are always advertised together. Within this set, the parameters are distinguished by the service categories and direction to which a set of parameters apply. This value is used as an index into the pnniMetricsTable. The distinguished value zero indicates that no metrics are associated with the link or nodal connectivity.
1.3.6.1.4.1.353.5.4.1.1.14.1.11PnniMetricsTagread-onlycurrent
pnniMapNodeTable
OBJECT-TYPE
A list of nodes as seen from the perspective of a local node. The pnniMapNodeTable contains all information learned by the local node from nodal information PTSEs. This entire object is read-only, reflecting the fact that the map is discovered dynamically during operation of the PNNI protocol rather than configured.
1.3.6.1.4.1.353.5.4.1.1.15not-accessiblecurrent
pnniMapNodeEntry
OBJECT-TYPE
An entry in the table, containing information about a node in the PNNI routing domain, as seen from the perspective of a logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.15.1not-accessiblecurrent
pnniMapNodeId
OBJECT-TYPE
Identifies the node whose nodal information is being described.
1.3.6.1.4.1.353.5.4.1.1.15.1.1PnniNodeIdnot-accessiblecurrent
pnniMapNodePeerGroupId
OBJECT-TYPE
Identifies the peer group of the originating node.
1.3.6.1.4.1.353.5.4.1.1.15.1.2PnniPeerGroupIdread-onlycurrent
pnniMapNodeAtmAddress
OBJECT-TYPE
The ATM End System Address of the originating node.
1.3.6.1.4.1.353.5.4.1.1.15.1.3PnniAtmAddrread-onlycurrent
pnniMapNodeRestrictedTransit
OBJECT-TYPE
Indicates whether the originating node is restricted to only allow support of SVCs originating or terminating at this node. A value of `true' indicates that the transit capabilities are restricted, i.e., transit connections are not allowed, whereas a value of `false' indicates that transit connections are allowed. This attribute reflects the setting of the restricted transit bit received in the nodal information PTSE of the originating node.
1.3.6.1.4.1.353.5.4.1.1.15.1.4TruthValueread-onlycurrent
pnniMapNodeComplexRep
OBJECT-TYPE
Indicates whether the originating node uses the complex node representation. If the value is `true', the spokes and bypasses that make up the complex node representation should be found in the pnniMapTable. This attribute reflects the setting of the nodal representation bit received in the nodal information PTSE of the originating node.
1.3.6.1.4.1.353.5.4.1.1.15.1.5TruthValueread-onlycurrent
pnniMapNodeRestrictedBranching
OBJECT-TYPE
Indicates whether the originating node is able to support additional branches. If the value is 'false', then it can support additional branches. This attribute reflects the setting of the restricted branching bit received in the nodal information PTSE of the originating node.
1.3.6.1.4.1.353.5.4.1.1.15.1.6TruthValueread-onlycurrent
pnniMapNodeDatabaseOverload
OBJECT-TYPE
Indicates whether the originating node is currently operating in topology database overload state. This attribute has the same value as the Non-transit for PGL Election bit in the nodal information group originated by this node.
1.3.6.1.4.1.353.5.4.1.1.15.1.7TruthValueread-onlycurrent
pnniMapNodeIAmLeader
OBJECT-TYPE
Indicates whether the originating node claims to be peer group leader of its peer group. This attribute reflects the setting of the 'I am Leader' bit received in the nodal information PTSE of the originating node.
1.3.6.1.4.1.353.5.4.1.1.15.1.8TruthValueread-onlycurrent
pnniMapNodeLeadershipPriority
OBJECT-TYPE
The Leadership priority value advertised by the originating node.
1.3.6.1.4.1.353.5.4.1.1.15.1.9INTEGER (0..255)read-onlycurrent
pnniMapNodePreferredPgl
OBJECT-TYPE
Identifies the node which the originating node believes should be or is peer group leader of its peer group. If the originating node has not chosen a Preferred PGL, this attribute's value is set to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.15.1.10PnniNodeIdread-onlycurrent
pnniMapNodeParentNodeId
OBJECT-TYPE
When the originating node is a peer group leader, indicates the node ID of the parent LGN. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.15.1.11PnniNodeIdread-onlycurrent
pnniMapNodeParentAtmAddress
OBJECT-TYPE
When the originating node is a peer group leader, indicates the ATM address of the parent LGN. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.15.1.12PnniAtmAddrread-onlycurrent
pnniMapNodeParentPeerGroupId
OBJECT-TYPE
When the originating node is a peer group leader, indicates the node's parent peer group ID. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.15.1.13PnniPeerGroupIdread-onlycurrent
pnniMapNodeParentPglNodeId
OBJECT-TYPE
When the originating node is a peer group leader, identifies the node elected as peer group leader of the parent peer group. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).
1.3.6.1.4.1.353.5.4.1.1.15.1.14PnniNodeIdread-onlycurrent
pnniMapAddrTable
OBJECT-TYPE
The pnniMapAddr MIB Object contains a list of all reachable addresses from each node visible to the local node. The Local Node Index, Advertising Node ID, Advertised Port ID, Reachable Address, and Address prefix length are combined to form an instance ID for this object. The entire object is read-only, reflecting the fact that reachable addresses are discovered during dynamic operation of the PNNI protocol rather than configured.
1.3.6.1.4.1.353.5.4.1.1.16not-accessiblecurrent
pnniMapAddrEntry
OBJECT-TYPE
An entry in the table, containing information about an address prefix reachable from a node in the PNNI routing domain, as seen from the perspective of a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.16.1not-accessiblecurrent
pnniMapAddrAdvertisingNodeId
OBJECT-TYPE
The node ID of a node advertising reachability to the address prefix.
1.3.6.1.4.1.353.5.4.1.1.16.1.1PnniNodeIdnot-accessiblecurrent
pnniMapAddrAdvertisedPortId
OBJECT-TYPE
The port identifier used from the advertising node to reach the given address prefix.
1.3.6.1.4.1.353.5.4.1.1.16.1.2PnniPortIdnot-accessiblecurrent
pnniMapAddrIndex
OBJECT-TYPE
An arbitrary index that is used to enumerate all of the addresses advertised by the specified node.
1.3.6.1.4.1.353.5.4.1.1.16.1.3INTEGER (1..2147483647)not-accessiblecurrent
pnniMapAddrAddress
OBJECT-TYPE
The value of the ATM End System Address prefix.
1.3.6.1.4.1.353.5.4.1.1.16.1.4AtmAddrPrefixread-onlycurrent
pnniMapAddrPrefixLength
OBJECT-TYPE
The Prefix length to be applied to the ATM End System Address prefix.
1.3.6.1.4.1.353.5.4.1.1.16.1.5PnniPrefixLengthread-onlycurrent
pnniMapTnsTable
OBJECT-TYPE
A list of all reachable transit networks from each node visible to the local node. The Local Node Index, Advertising Node ID, Advertised Port ID, Transit Network Type, Transit Network Plan, and Transit Network ID are combined to form an instance ID for this object. The entire object is read-only, reflecting the fact that reachable transit networks are discovered during dynamic operation of the PNNI protocol rather than configured.
1.3.6.1.4.1.353.5.4.1.1.17not-accessiblecurrent
pnniMapTnsEntry
OBJECT-TYPE
An entry in the table, containing information about a transit network reachable from a node in the PNNI routing domain, as seen from the perspective of a PNNI logical node in this switching system.
1.3.6.1.4.1.353.5.4.1.1.17.1not-accessiblecurrent
pnniMapTnsAdvertisingNodeId
OBJECT-TYPE
The node ID of a node advertising reachability to the transit network.
1.3.6.1.4.1.353.5.4.1.1.17.1.1PnniNodeIdnot-accessiblecurrent
pnniMapTnsAdvertisedPortId
OBJECT-TYPE
The port identifier used from the advertising node to reach the given transit network.
1.3.6.1.4.1.353.5.4.1.1.17.1.2PnniPortIdnot-accessiblecurrent
pnniMapTnsType
OBJECT-TYPE
The type of network identification used for this transit network.
1.3.6.1.4.1.353.5.4.1.1.17.1.3TnsTypenot-accessiblecurrent
pnniMapTnsPlan
OBJECT-TYPE
The network identification plan according to which network identification has been assigned.
1.3.6.1.4.1.353.5.4.1.1.17.1.4TnsPlannot-accessiblecurrent
pnniMapTnsId
OBJECT-TYPE
The value of the transit network identifier.
1.3.6.1.4.1.353.5.4.1.1.17.1.5DisplayStringread-onlycurrent
pnniMetricsTable
OBJECT-TYPE
This entity's table of PNNI parameters either associated with a PNNI entity or for the connectivity between a PNNI node and a reachable address or transit network.
1.3.6.1.4.1.353.5.4.1.1.18not-accessiblecurrent
pnniMetricsEntry
OBJECT-TYPE
A set of parameters that applies to the connectivity from a certain node and port to another node or port or to one or more reachable address prefixes and/or transit networks, for one (or more) particular service category(s). Note that there can be multiple sets of parameters with the same tag, in which case all sets apply to the specified connectivity.
1.3.6.1.4.1.353.5.4.1.1.18.1not-accessiblecurrent
pnniMetricsTag
OBJECT-TYPE
An arbitrary integer that is used to associate a set of traffic parameters that are always advertised together. Within this set, the parameters are distinguished by the service categories and direction to which a set of parameters apply.
1.3.6.1.4.1.353.5.4.1.1.18.1.1PnniMetricsTag (1..2147483647)not-accessiblecurrent
pnniMetricsDirection
OBJECT-TYPE
The direction, with respect to the advertising node, in which the parameters in this entry apply.
1.3.6.1.4.1.353.5.4.1.1.18.1.2INTEGER {incoming(1), outgoing(2)}not-accessiblecurrent
pnniMetricsIndex
OBJECT-TYPE
An index into the set of parameters associated with the given tag and direction.
1.3.6.1.4.1.353.5.4.1.1.18.1.3Integer32 (1..2147483647)not-accessiblecurrent
pnniMetricsClasses
OBJECT-TYPE
The service categories to which this set of parameters applies. This is an integer used as a bit mask with each bit that is set representing a single service category for which the resources indicated are available. Bit 5 represents CBR, bit 4 represents real-time VBR, bit 3 represents non-real-time VBR, bit 2 represents ABR, and bit 1 (LSB) represents UBR.
1.3.6.1.4.1.353.5.4.1.1.18.1.4INTEGER (0..31)read-createcurrent
pnniMetricsGcacClp
OBJECT-TYPE
Indicates whether the advertised GCAC parameters apply for CLP=0 traffic or for CLP=0+1 traffic.
1.3.6.1.4.1.353.5.4.1.1.18.1.5ClpTyperead-createcurrent
pnniMetricsAdminWeight
OBJECT-TYPE
The administrative weight from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories.
1.3.6.1.4.1.353.5.4.1.1.18.1.6Unsigned32 (1..16777215)read-createcurrent
pnniMetrics1
OBJECT-TYPE
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the maximum cell rate in cells per second for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.18.1.7Unsigned32read-createcurrent
pnniMetrics2
OBJECT-TYPE
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the available cell rate in cells per second for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.18.1.8Unsigned32read-createcurrent
pnniMetrics3
OBJECT-TYPE
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the maximum cell transfer delay in microseconds for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.18.1.9Unsigned32read-createcurrent
pnniMetrics4
OBJECT-TYPE
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the cell delay variation in microseconds for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.18.1.10Unsigned32read-createcurrent
pnniMetrics5
OBJECT-TYPE
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For PNNI, this is the cell loss ratio for CLP=0 traffic for the specified service categories. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.18.1.11Unsigned32read-createcurrent
pnniMetrics6
OBJECT-TYPE
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For PNNI, this is the cell loss ratio for CLP=0+1 traffic for the specified service categories. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.18.1.12Unsigned32read-createcurrent
pnniMetrics7
OBJECT-TYPE
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the cell rate margin in cells per second for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.18.1.13Unsigned32read-createcurrent
pnniMetrics8
OBJECT-TYPE
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the variance factor in units of 2**(-8) for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.18.1.14Unsigned32read-createcurrent
pnniMetricsRowStatus
OBJECT-TYPE
To create, delete, activate and de-activate a set of metrics.
1.3.6.1.4.1.353.5.4.1.1.18.1.15RowStatusread-createcurrent
pnniRoutingGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.4.1.1.19
pnniRouteBaseGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.4.1.1.19.1
pnniRouteNodeNumber
OBJECT-TYPE
The number of current precalculated PNNI routes to PNNI nodes that are not invalid.
1.3.6.1.4.1.353.5.4.1.1.19.1.1Gauge32read-onlycurrent
pnniRouteAddrNumber
OBJECT-TYPE
The number of current PNNI routes from nodes in the PNNI routing domain to addresses and transit networks that are not invalid.
1.3.6.1.4.1.353.5.4.1.1.19.1.2Gauge32read-onlycurrent
pnniRouteNodeTable
OBJECT-TYPE
This entity's PNNI Routing table (of routes to other nodes).
1.3.6.1.4.1.353.5.4.1.1.19.2not-accessiblecurrent
pnniRouteNodeEntry
OBJECT-TYPE
A particular route to a particular destination node, under a particular policy.
1.3.6.1.4.1.353.5.4.1.1.19.2.1not-accessiblecurrent
pnniRouteNodeClass
OBJECT-TYPE
Indicates the service category with which this forwarding table entry is associated.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.1ServiceCategorynot-accessiblecurrent
pnniRouteNodeDestNodeId
OBJECT-TYPE
The node ID of the destination node to which this route proceeds, and at which the DTL stack for this route terminates.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.2PnniNodeIdnot-accessiblecurrent
pnniRouteNodeDTL
OBJECT-TYPE
The index into the owning PNNI node's DTL table of the DTL stack that goes with this route.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.3Integer32 (1..2147483647)not-accessiblecurrent
pnniRouteNodeDestPortId
OBJECT-TYPE
The port ID of the destination node at which the route terminates. A port ID of zero indicates the node nucleus. When the destination node is represented by the simple node representation, this value should be set to zero.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.4PnniPortIdread-createcurrent
pnniRouteNodeProto
OBJECT-TYPE
The routing mechanism via which this route was learned.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.5INTEGER {other(1), local(2), mgmt(3), pnni(4)}read-onlycurrent
pnniRouteNodeTimeStamp
OBJECT-TYPE
The time at which this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.6TimeStampread-onlycurrent
pnniRouteNodeInfo
OBJECT-TYPE
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's pnniRouteNodeProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER zeroDotZero.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.7OBJECT IDENTIFIERread-createcurrent
pnniRouteNodeGcacClp
OBJECT-TYPE
For PNNI, indicates whether any advertised GCAC parameters apply for CLP=0 traffic or for CLP=0+1 traffic.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.8ClpTyperead-createcurrent
pnniRouteNodeFwdMetricAW
OBJECT-TYPE
The cumulative administrative weight calculated for the forward direction of this route. If this metric is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.9Unsigned32read-createcurrent
pnniRouteNodeFwdMetric1
OBJECT-TYPE
An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the maximum possible cell rate (in cells per second) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.10Unsigned32read-createcurrent
pnniRouteNodeFwdMetric2
OBJECT-TYPE
An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Available cell rate (in cells per second) for the forward direction of the route. Further information on available bandwidth may be obtainable by reference to the nodal advertisements of the nodes in the path. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.11Unsigned32read-createcurrent
pnniRouteNodeFwdMetric3
OBJECT-TYPE
An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Maximum Cell Transfer Delay (in microseconds) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.12Unsigned32read-createcurrent
pnniRouteNodeFwdMetric4
OBJECT-TYPE
An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Delay Variation (in microseconds) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.13Unsigned32read-createcurrent
pnniRouteNodeFwdMetric5
OBJECT-TYPE
An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0 traffic for the forward direction of the route. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.14Unsigned32read-createcurrent
pnniRouteNodeFwdMetric6
OBJECT-TYPE
An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0+1 traffic for the forward direction of the route. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.15Unsigned32read-createcurrent
pnniRouteNodeFwdMetric7
OBJECT-TYPE
An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Cell Rate Margin (in cells per second) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.16Unsigned32read-createcurrent
pnniRouteNodeFwdMetric8
OBJECT-TYPE
An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Variance Factor (in units of 2**(-8)) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.17Unsigned32read-createcurrent
pnniRouteNodeBwdMetricAW
OBJECT-TYPE
The administrative weight calculated for the backward direction of this route. If this metric is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.18Unsigned32read-createcurrent
pnniRouteNodeBwdMetric1
OBJECT-TYPE
An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the maximum possible cell rate (in cells per second) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.19Unsigned32read-createcurrent
pnniRouteNodeBwdMetric2
OBJECT-TYPE
An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Available cell rate (in cells per second) for the backward direction of the route. Further information on available bandwidth may be obtainable by reference to the nodal advertisements of the nodes in the path. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.20Unsigned32read-createcurrent
pnniRouteNodeBwdMetric3
OBJECT-TYPE
An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Maximum Cell Transfer Delay (in microseconds) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.21Unsigned32read-createcurrent
pnniRouteNodeBwdMetric4
OBJECT-TYPE
An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Delay Variation (in microseconds) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.22Unsigned32read-createcurrent
pnniRouteNodeBwdMetric5
OBJECT-TYPE
An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0 traffic for the backward direction of the route. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.23Unsigned32read-createcurrent
pnniRouteNodeBwdMetric6
OBJECT-TYPE
An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0+1 traffic for the backward direction of the route. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.24Unsigned32read-createcurrent
pnniRouteNodeBwdMetric7
OBJECT-TYPE
An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Cell Rate Margin (in cells per second) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.25Unsigned32read-createcurrent
pnniRouteNodeBwdMetric8
OBJECT-TYPE
An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Variance Factor (in units of 2**(-8)) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.26Unsigned32read-createcurrent
pnniRouteNodeVPCapability
OBJECT-TYPE
This attribute indicates whether a VPC setup on this route is possible.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.27TruthValueread-createcurrent
pnniRouteNodeStatus
OBJECT-TYPE
The row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.353.5.4.1.1.19.2.1.28RowStatusread-createcurrent
pnniDTLTable
OBJECT-TYPE
The set of all DTL stacks used for the pre-computed routes maintained by this managed entity.
1.3.6.1.4.1.353.5.4.1.1.19.3not-accessiblecurrent
pnniDTLEntry
OBJECT-TYPE
A segment of a DTL stack. The complete DTL stack is formed by traversing the rows of the table for which the pnniDTLIndex is the same. Level transitions are indicated using the pnniDLTLinkType column.
1.3.6.1.4.1.353.5.4.1.1.19.3.1not-accessiblecurrent
pnniDTLIndex
OBJECT-TYPE
The index in the node's DTL table of this DTL stack.
1.3.6.1.4.1.353.5.4.1.1.19.3.1.1Integer32 (1..2147483647)not-accessiblecurrent
pnniDTLEntryIndex
OBJECT-TYPE
The index in the current DTL stack of this entry.
1.3.6.1.4.1.353.5.4.1.1.19.3.1.2Integer32 (1..200)not-accessiblecurrent
pnniDTLNodeId
OBJECT-TYPE
The node which is this hop in the DTL stack.
1.3.6.1.4.1.353.5.4.1.1.19.3.1.3PnniNodeIdread-createcurrent
pnniDTLPortId
OBJECT-TYPE
The port from the pnniDTLNodeId to use as the exit. If the DTL stack does not care, this is coded as zero.
1.3.6.1.4.1.353.5.4.1.1.19.3.1.4PnniPortIdread-createcurrent
pnniDTLLinkType
OBJECT-TYPE
The type of link out from this node (pnniDTLNodeId). This is well defined even if the specific port is not specified.
1.3.6.1.4.1.353.5.4.1.1.19.3.1.5INTEGER {invalid(1), horizontal(2), uplink(3), last(4)}read-createcurrent
pnniDTLStatus
OBJECT-TYPE
The row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.353.5.4.1.1.19.3.1.6RowStatusread-createcurrent
pnniRouteAddrTable
OBJECT-TYPE
A table containing all the attributes necessary to determine what the PNNI entity believes is reachable in terms of ATM End System Addresses and to determine which nodes are advertising this reachability. This table is also used to configure static routes to reachable address prefixes. The local node index that received the reachability information, reachable address, address prefix length, and an index that distinguishes between multiple listings of connectivity to a given address prefix from a given local node are combined to form an instance ID for this object.
1.3.6.1.4.1.353.5.4.1.1.19.4not-accessiblecurrent
pnniRouteAddrEntry
OBJECT-TYPE
An entry in the table, containing information about a reachable address prefix.
1.3.6.1.4.1.353.5.4.1.1.19.4.1not-accessiblecurrent
pnniRouteAddrAddress
OBJECT-TYPE
The value of the ATM End System Address prefix.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.1AtmAddrPrefixnot-accessiblecurrent
pnniRouteAddrPrefixLength
OBJECT-TYPE
The prefix length to be applied to the ATM End System Address prefix.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.2PnniPrefixLengthnot-accessiblecurrent
pnniRouteAddrIndex
OBJECT-TYPE
An index into the set of listings of connectivity to a given address prefix from a given local node.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.3Integer32 (1..65535)not-accessiblecurrent
pnniRouteAddrIfIndex
OBJECT-TYPE
The local interface over which the reachable address can be reached. The value zero indicates an unknown interface or reachability through a remote node. This object may only have a non-zero value if the value of the corresponding instance of pnniRouteAddrProto is other than 'pnni', pnniRouteAddrType is other than 'reject', and the node identified by pnniRouteAddrAdvertisingNodeId is instantiated within this switching system.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.4InterfaceIndexread-createcurrent
pnniRouteAddrAdvertisingNodeId
OBJECT-TYPE
The node ID of a node advertising reachability to the address prefix. If the local node index is zero, then the advertising node ID must be set to all zeros.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.5PnniNodeIdread-createcurrent
pnniRouteAddrAdvertisedPortId
OBJECT-TYPE
The port identifier used from the advertising node to reach the given address prefix.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.6PnniPortIdread-createcurrent
pnniRouteAddrType
OBJECT-TYPE
The type (e.g. internal or exterior) of reachability from the advertising node to the address prefix. Reject(2) refers to an address prefix which, if matched, indicates that the message should be discarded as unreachable. This is used in some protocols as a means of correctly aggregating routes.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.7INTEGER {other(1), reject(2), internal(3), exterior(4)}read-createcurrent
pnniRouteAddrProto
OBJECT-TYPE
The routing mechanism via which the connectivity from the advertising node to the reachable address prefix was learned.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.8INTEGER {other(1), local(2), mgmt(3), pnni(4)}read-onlycurrent
pnniRouteAddrPnniScope
OBJECT-TYPE
The PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the address prefix.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.9PnniLevelread-createcurrent
pnniRouteAddrVPCapability
OBJECT-TYPE
Indicates whether VPCs can be established from the advertising node to the reachable address prefix.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.10TruthValueread-createcurrent
pnniRouteAddrMetricsTag
OBJECT-TYPE
The index into the pnniMetricsTable for the traffic parameter values that apply for the connectivity from the advertising node to the reachable address prefix. There will be one or more entries in the pnniMetricsTable whose first instance identifier matches the value of this variable. If there are no parameters associated with this reachable address prefix then the distinguished value zero is used.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.11PnniMetricsTagread-createcurrent
pnniRouteAddrPtseId
OBJECT-TYPE
For reachable addresses learned via PNNI, this attribute contains the value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the reachable address. For reachable addresses learned by means other than PNNI, this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.12Unsigned32read-onlycurrent
pnniRouteAddrOriginateAdvertisement
OBJECT-TYPE
Whether or not the reachable address specified by this entry is to be advertised by the local node into its PNNI routing domain. This object may only take on the value 'true' when the value of the corresponding instance of pnniRouteAddrProto is other than 'pnni'.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.13TruthValueread-createcurrent
pnniRouteAddrInfo
OBJECT-TYPE
A reference to MIB definitions specific to the particular routing protocol which is responsible for this reachable address prefix, as determined by the value specified in the route's pnniRouteAddrProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER zeroDotZero.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.14OBJECT IDENTIFIERread-createcurrent
pnniRouteAddrOperStatus
OBJECT-TYPE
Indicates whether the reachable address prefix is operationally valid and whether it is being advertised by this node.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.15INTEGER {inactive(1), active(2), advertised(3)}read-onlycurrent
pnniRouteAddrTimeStamp
OBJECT-TYPE
Indicates when the connectivity from the advertising node to the reachable address prefix became known to the local node.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.16TimeStampread-onlycurrent
pnniRouteAddrRowStatus
OBJECT-TYPE
To create, delete, activate and de-activate a reachable address prefix.
1.3.6.1.4.1.353.5.4.1.1.19.4.1.17RowStatusread-createcurrent
pnniRouteTnsTable
OBJECT-TYPE
A table containing all the attributes necessary to determine what transit networks the PNNI entity believes are reachable and to determine which nodes are advertising this reachability. This table is also used to add static routes to reachable transit networks. The local node index which received the reachability information, type of network identification, network identification plan, transit network identifier, and an index that distinguishes between multiple listings of connectivity to a given transit network from a given local node are combined to form an instance ID for this object.
1.3.6.1.4.1.353.5.4.1.1.19.5not-accessiblecurrent
pnniRouteTnsEntry
OBJECT-TYPE
An entry in the table, containing information about a reachable transit network.
1.3.6.1.4.1.353.5.4.1.1.19.5.1not-accessiblecurrent
pnniRouteTnsType
OBJECT-TYPE
The type of network identification used for this transit network.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.1TnsTypenot-accessiblecurrent
pnniRouteTnsPlan
OBJECT-TYPE
The network identification plan according to which network identification has been assigned.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.2TnsPlannot-accessiblecurrent
pnniRouteTnsId
OBJECT-TYPE
The value of the transit network identifier.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.3DisplayStringnot-accessiblecurrent
pnniRouteTnsIndex
OBJECT-TYPE
An index into the set of listings of connectivity to a given transit network from a given local node.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.4Integer32 (1..65535)not-accessiblecurrent
pnniRouteTnsIfIndex
OBJECT-TYPE
The local interface over which the transit network can be reached. The value zero indicates an unknown interface or reachability through a remote node. This object may only have a non-zero value if the value of the corresponding instance of pnniRouteTnsProto is other than 'pnni' and the node identified by pnniRouteTnsAdvertisingNodeId is instantiated within this switching system.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.5InterfaceIndexread-createcurrent
pnniRouteTnsAdvertisingNodeId
OBJECT-TYPE
The node ID of a node advertising reachability to the transit network. If the local node index is zero, then the advertising node ID must also be set to zero.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.6PnniNodeIdread-createcurrent
pnniRouteTnsAdvertisedPortId
OBJECT-TYPE
The port identifier used from the advertising node to reach the given transit network.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.7PnniPortIdread-createcurrent
pnniRouteTnsRouteType
OBJECT-TYPE
The type (e.g. exterior or other) of reachability from the advertising node to the transit network.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.8INTEGER {other(1), exterior(4)}read-createcurrent
pnniRouteTnsProto
OBJECT-TYPE
The routing mechanism via which the connectivity from the advertising node to the transit network was learned.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.9INTEGER {other(1), local(2), mgmt(3), pnni(4)}read-onlycurrent
pnniRouteTnsPnniScope
OBJECT-TYPE
The PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the transit network.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.10PnniLevelread-createcurrent
pnniRouteTnsVPCapability
OBJECT-TYPE
Indicates whether VPCs can be established from the advertising node to the reachable transit network.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.11TruthValueread-createcurrent
pnniRouteTnsMetricsTag
OBJECT-TYPE
The index into the pnniMetricsTable for the traffic parameter values that apply for the connectivity from the advertising node to the transit network. There will be one or more entries in the pnniMetricsTable whose first instance identifier matches the value of this variable. If there are no parameters associated with this transit network then the distinguished value zero is used.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.12PnniMetricsTagread-createcurrent
pnniRouteTnsPtseId
OBJECT-TYPE
For reachable transit networks learned via PNNI, this attribute contains the value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the transit network. For reachable transit networks learned by means other than PNNI, this attribute is set to zero.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.13Unsigned32read-onlycurrent
pnniRouteTnsOriginateAdvertisement
OBJECT-TYPE
Whether or not the transit network specified by this entry is to be advertised by the local node into its PNNI routing domain. This object may only take on the value 'true' when the value of the corresponding instance of pnniRouteNodeProto is other than 'pnni'.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.14TruthValueread-createcurrent
pnniRouteTnsInfo
OBJECT-TYPE
A reference to MIB definitions specific to the particular routing protocol which is responsible for this transit network, as determined by the value specified in the route's pnniRouteTnsProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER zeroDotZero.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.15OBJECT IDENTIFIERread-createcurrent
pnniRouteTnsOperStatus
OBJECT-TYPE
Indicates whether the reachable transit network is operationally valid and whether it is being advertised by this node.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.16INTEGER {inactive(1), active(2), advertised(3)}read-onlycurrent
pnniRouteTnsTimeStamp
OBJECT-TYPE
Indicates how long the connectivity from the advertising node to the reachable transit network has been known to the local node.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.17TimeStampread-onlycurrent
pnniRouteTnsRowStatus
OBJECT-TYPE
To create, delete, activate and de-activate a reachable transit network.
1.3.6.1.4.1.353.5.4.1.1.19.5.1.18RowStatusread-createcurrent
pnniSummaryAddressTable
OBJECT-TYPE
A list of the summary address prefixes that may be advertised by the specified logical PNNI entity.
1.3.6.1.4.1.353.5.4.1.1.20not-accessiblecurrent
pnniSummaryAddressEntry
OBJECT-TYPE
An entry in the table, containing summary address prefix information in this switching system.
1.3.6.1.4.1.353.5.4.1.1.20.1not-accessiblecurrent
pnniSummaryAddressType
OBJECT-TYPE
The type (e.g. internal or exterior) of summary being described.
1.3.6.1.4.1.353.5.4.1.1.20.1.1INTEGER {internal(1), exterior(2)}not-accessiblecurrent
pnniSummaryAddressAddress
OBJECT-TYPE
The ATM End System Address prefix for the summary.
1.3.6.1.4.1.353.5.4.1.1.20.1.2AtmAddrPrefixnot-accessiblecurrent
pnniSummaryAddressPrefixLength
OBJECT-TYPE
The prefix length for the summary.
1.3.6.1.4.1.353.5.4.1.1.20.1.3PnniPrefixLengthnot-accessiblecurrent
pnniSummaryAddressSuppress
OBJECT-TYPE
Determines what is done with addresses that are being summarized by the instance. The default value (e.g. false) will indicate that the summary should propagate into the peer group. Network Management will be able to set the value of this attribute to `suppress' (e.g. true), which suppresses the summary and any reachable addresses it summarizes from being advertised into the peer group.
1.3.6.1.4.1.353.5.4.1.1.20.1.4TruthValueread-createcurrent
pnniSummaryAddressState
OBJECT-TYPE
Indicates whether the summary is currently being advertised by the node within the local switching system into its peer group.
1.3.6.1.4.1.353.5.4.1.1.20.1.5INTEGER {advertising(1), suppressing(2), inactive(3)}read-onlycurrent
pnniSummaryAddressRowStatus
OBJECT-TYPE
To create, delete, activate and de-activate a summary.
1.3.6.1.4.1.353.5.4.1.1.20.1.6RowStatusread-createcurrent
pnniMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.4.1.2
pnniMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.4.1.2.1
pnniMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.4.1.2.2

Conformance

NameOIDStatus
pnniMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the PNNI MIB. Groups of PNNI objects required for management of a minimum function node are identified by the suffix MinGroup. Groups of PNNI objects required for management of a border node are identified by the suffix BorderGroup. Groups of PNNI objects required for management of a PGL/LGN capable node are identified by the suffix LgnGroup. Groups of optional PNNI objects are identified by the suffix OptionalGroup.
1.3.6.1.4.1.353.5.4.1.2.1.1current
pnniGeneralMinGroup
OBJECT-GROUP
A collection of general PNNI objects required for management of a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.1current
pnniGeneralBorderGroup
OBJECT-GROUP
A collection of general PNNI objects required for management of a border node.
1.3.6.1.4.1.353.5.4.1.2.2.2current
pnniNodeMinGroup
OBJECT-GROUP
A collection of per node PNNI objects required for management of a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.3current
pnniNodePglMinGroup
OBJECT-GROUP
A collection of per node PGL election related PNNI objects required for management of a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.4current
pnniNodePglLgnGroup
OBJECT-GROUP
A collection of per node PGL election related PNNI objects required for management of a PGL/LGN capable switching system.
1.3.6.1.4.1.353.5.4.1.2.2.5current
pnniNodeTimerMinGroup
OBJECT-GROUP
A collection of per node PNNI objects required for management of timers and significant change thresholds in a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.6current
pnniNodeTimerLgnGroup
OBJECT-GROUP
A collection of per node PNNI objects required for management of timers in a PGL/LGN capable switching system.
1.3.6.1.4.1.353.5.4.1.2.2.7current
pnniNodeSvccLgnGroup
OBJECT-GROUP
A collection of per node SVCC-based RCC related PNNI objects required for management of a PGL/LGN capable switching system.
1.3.6.1.4.1.353.5.4.1.2.2.8current
pnniScopeMinGroup
OBJECT-GROUP
A collection of per node scope mapping related PNNI objects required for management of a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.9current
pnniSummaryLgnGroup
OBJECT-GROUP
A collection of PNNI objects required for controlling address summarization.
1.3.6.1.4.1.353.5.4.1.2.2.10deprecated
pnniIfMinGroup
OBJECT-GROUP
A collection of per interface PNNI objects required for management of a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.11current
pnniIfBorderGroup
OBJECT-GROUP
A collection of per interface PNNI objects required for management of a border node.
1.3.6.1.4.1.353.5.4.1.2.2.12current
pnniLinkMinGroup
OBJECT-GROUP
A collection of per link PNNI objects required for management of a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.13current
pnniLinkBorderOrLgnGroup
OBJECT-GROUP
A collection of per link PNNI objects required for management of a border node or a PGL/LGN capable switching system.
1.3.6.1.4.1.353.5.4.1.2.2.14current
pnniLinkLgnGroup
OBJECT-GROUP
A collection of per link PNNI objects required for management of a PGL/LGN capable switching system.
1.3.6.1.4.1.353.5.4.1.2.2.15current
pnniNbrPeerMinGroup
OBJECT-GROUP
A collection of per neighboring peer PNNI objects required for management of a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.16current
pnniNbrPeerLgnGroup
OBJECT-GROUP
A collection of per neighboring peer PNNI objects required for management of a PGL/LGN capable switching system.
1.3.6.1.4.1.353.5.4.1.2.2.17current
pnniNbrPeerPortMinGroup
OBJECT-GROUP
A collection of per port to neighboring peer PNNI objects required for management of a minimum function switching system.
1.3.6.1.4.1.353.5.4.1.2.2.18current
pnniSvccRccLgnGroup
OBJECT-GROUP
A collection of per SVCC-based RCC PNNI objects required for management of a PGL/LGN capable switching system.
1.3.6.1.4.1.353.5.4.1.2.2.19current
pnniPtseOptionalGroup
OBJECT-GROUP
A collection of optional per PTSE PNNI objects.
1.3.6.1.4.1.353.5.4.1.2.2.20current
pnniMapOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to create a map of nodes and links in the PNNI routing domain.
1.3.6.1.4.1.353.5.4.1.2.2.21current
pnniMapNodeOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to create a map of nodes in the PNNI routing domain.
1.3.6.1.4.1.353.5.4.1.2.2.22current
pnniMapAddrOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to create a map of reachable addresses in the PNNI routing domain.
1.3.6.1.4.1.353.5.4.1.2.2.23current
pnniMapTnsOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to create a map of reachable transit networks in the PNNI routing domain.
1.3.6.1.4.1.353.5.4.1.2.2.24current
pnniMetricsOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to manage metrics and attributes associated with PNNI entities.
1.3.6.1.4.1.353.5.4.1.2.2.25current
pnniRouteGeneralOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects.
1.3.6.1.4.1.353.5.4.1.2.2.26current
pnniRouteNodeOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to manage precalculated routes to nodes in the PNNI routing domain.
1.3.6.1.4.1.353.5.4.1.2.2.27current
pnniDTLOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to manage precalculated routes to nodes in the PNNI routing domain.
1.3.6.1.4.1.353.5.4.1.2.2.28current
pnniRouteAddrOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to manage routes to reachable addresses in the PNNI routing domain.
1.3.6.1.4.1.353.5.4.1.2.2.29current
pnniRouteTnsOptionalGroup
OBJECT-GROUP
A collection of optional PNNI objects used to manage routes to reachable transit networks in the PNNI routing domain.
1.3.6.1.4.1.353.5.4.1.2.2.30current
pnniSummaryAddressLgnGroup
OBJECT-GROUP
A collection of PNNI objects required for controlling address summarization.
1.3.6.1.4.1.353.5.4.1.2.2.31current