MIBs Depot

CISCO-WAN-SVC-MIB

Registered at
1.3.6.1.4.1.351.140
Last updated
2003-03-10 00:00
Organization
Cisco System, Inc
Revisions
2003-03-10 00:00, 2002-09-16 00:00, 2002-03-01 00:00, 2001-07-19 00:00, 2001-07-06 00:00, 2001-06-06 00:00, 2001-05-10 00:00, 2000-10-20 00:00, 2000-09-01 00:00, 2000-08-03 00:00, 2000-06-15 00:00, 2000-04-01 00:00
Namespace
cisco
Source file
CISCO-WAN-SVC-MIB
Digest
sha256:5ede9b1ef41b5321f98c1eae2b062c878a064f2c8345c24a008ea16e21c50e67

Description

The MIB modules describe an ATM network service on a BPX-SES or a MGX ATM switch. This MIB module provides configuring, provisioning, as well as status gathering for ATM services. Abbreviation used: ABR -- Available Bit Rate AINI -- ATM Inter-Network Interface ATM -- Asynchronous Transfer Mode BGN -- Begin BW -- Bandwidth CBR -- Constant Bit Rate ENNI -- Enhanced Network to Network Interface Note: The 'ENNI' term used here indicating 'enhanced' or 'friendly' NNI for linking two networks of CISCO AutoRoute or PNNI switches. The XPVCs and XPVPs are provisioned across them. Functionality includes changing segment OAM cell handling so that these cells flow over 'end-to-end OAM segment' loops for the provisioned length of the XPVC or XPVP, i.e. the 'segment' comprises the two or three segments between the user ports. Also implemented at ENNIs is an LMI functionality that enables auto-discovery of the ENNIs. ER -- Error Recovery GAT -- Generic Application Transport IE -- Information Element IISP -- Interim Inter-Switch Signaling Protocol ILMI -- Interim Local Management Interface MD -- Management Data PNNI -- Private Network-Network Interface RS -- Resynchronization REJ -- Rejection SD -- Sequence Data SDP -- Sequence Data with Poll SPVC -- Soft Permanent Virtual Circuit SSCOP -- Service Specific Connection Oriented Protocol SVC -- Switched Virtual Circuit UBR -- Unspecified Bit Rate UD -- Unit Data UNI -- User-Network Interface USTAT -- Unsolicited STAT VBR -- Variable Bit Rate

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95143 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com

Imports

FromSymbols
ATM-FORUM-TC-MIBAtmAddress, NetPrefix
CISCO-WAN-ATM-CONN-MIBCiscoWanNsapAtmAddress
CISCOWAN-SMIstratacom
IF-MIBInterfaceIndex, ifIndex
PNNI-MIBPnniNodeId, PnniPortId
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-FORUM-TC-MIB
ATM-TC-MIB
CISCO-WAN-ATM-CONN-MIB
CISCO-WAN-SVC-MIB
CISCOWAN-SMI
IANAifType-MIB
IF-MIB
PNNI-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CwspControllerState
TEXTUAL-CONVENTION
Defines possible state for the pnni controller.
current
CwspSpvcState
TEXTUAL-CONVENTION
Defines possible failures at an endpoint. The following are implemented: genSpvcErr(1) -- General SPVC error, sRecvSetupConfmMismatch(12) -- Connection ATM Conformance type -- mismatch with master at slave endpoint. sRecvSetupServMismatch(13) -- Connection Service type mismatch with -- master at slave endpoint. sRecvSetupTrafParmMismatch(14), -- Traffic parameters mismatch with master -- at slave endpoint. masterSpvcAutoDelete(15) -- Controller auto deleting provisioned -- master SPVC. and slaveSpvcAutoDelete(16) -- Controller auto deleting provisioned -- slave SPVC.
current

Objects

NameOIDSyntaxAccessStatus
ciscoWANSvcMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1
ciscoWANSvcInfo
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.1
cwsSwRevision
OBJECT-TYPE
PNNI network controller software revision number.
1.3.6.1.4.1.351.140.1.1.1DisplayStringread-onlycurrent
cwsControllerStatus
OBJECT-TYPE
The administrative status for the pnni active controller.
1.3.6.1.4.1.351.140.1.1.6CwspControllerStateread-onlycurrent
cwspPnniStndbyControllerStatus
OBJECT-TYPE
The administrative status for the standby controller.
1.3.6.1.4.1.351.140.1.1.7CwspControllerStateread-onlycurrent
cwspPnniControllerStatus
OBJECT-TYPE
The administrative status of the pnni controller. Note: this object is only used in the trap varbind, snmp get operation is meaningless.
1.3.6.1.4.1.351.140.1.1.8INTEGER {active(1), stndby(2), unavailable(3)}read-onlycurrent
cwspPnniControllerPhySlot
OBJECT-TYPE
The pnni controller physical location for MGX or BPX-SES. Note: this object is only used in the trap varbind, snmp get operation is meaningless.
1.3.6.1.4.1.351.140.1.1.9Integer32 (1..16)read-onlycurrent
ciscoWANSvcPort
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2
cwspConfig
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.1
cwspConfigTable
OBJECT-TYPE
The Interface configuration table collects attributes that affect the operation of the controller interface. There is a single row for each interface that the managed system is expected to be added or managed.
1.3.6.1.4.1.351.140.1.2.1.1not-accessiblecurrent
cwspConfigEntry
OBJECT-TYPE
An entry in the interface configuration table containing information about an interface
1.3.6.1.4.1.351.140.1.2.1.1.1not-accessiblecurrent
cwspAdminStatus
OBJECT-TYPE
The administrative status of the interface. inService (1) means that the interface is operational while outService (2) indicates that the interface is put out of service by the administrator.
1.3.6.1.4.1.351.140.1.2.1.1.1.1INTEGER {inService(1), outService(2)}read-createcurrent
cwspOperStatus
OBJECT-TYPE
The operational state of the interface. This status is derived from the physical state of the interface. failed (2) indicates that the interface has failed. ok (1) indicates that the interface is in operational status, while other (3) denotes that the interface is in an unknown state.
1.3.6.1.4.1.351.140.1.2.1.1.1.2INTEGER {ok(1), failed(2), other(3)}read-onlycurrent
cwspSvcBlocked
OBJECT-TYPE
Indicates whether Switches virtual connections are allowed through this interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.3TruthValueread-createcurrent
cwspSpvcBlocked
OBJECT-TYPE
Indicates whether soft permanent virtual connections are allowed through this interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.4TruthValueread-createcurrent
cwspIlmiAddrRegEnable
OBJECT-TYPE
Indicates whether ILMI address registration is enabled or disabled.
1.3.6.1.4.1.351.140.1.2.1.1.1.5TruthValueread-createcurrent
cwspIlmiAutoConfEnable
OBJECT-TYPE
Indicates whether auto-configuration of the interface is turned on or off. If auto-configuration is enabled, then the interface comes up using the ILMI auto-configuration.
1.3.6.1.4.1.351.140.1.2.1.1.1.6TruthValueread-createcurrent
cwspIlmiServRegEnable
OBJECT-TYPE
Indicates whether service registry is enabled or disabled on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.7TruthValueread-createcurrent
cwspPhyIdentifier
OBJECT-TYPE
Indicates the physical identification of the interface. Mandatory when the port is provisioned for the first time through SNMP.
1.3.6.1.4.1.351.140.1.2.1.1.1.8DisplayStringread-createcurrent
cwspSignallingVpi
OBJECT-TYPE
Denotes the Signaling VPI used on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.9Integer32 (0..4095)read-createcurrent
cwspSignallingVci
OBJECT-TYPE
Indicates the signaling VCI used on the interface, acceptable value is 32-65535, and 5 being the default.
1.3.6.1.4.1.351.140.1.2.1.1.1.10Integer32 (0..65535)read-createcurrent
cwspRoutingVpi
OBJECT-TYPE
Indicates the VPI used for PNNI lowest level RCC.
1.3.6.1.4.1.351.140.1.2.1.1.1.11Integer32 (0..4095)read-createcurrent
cwspRoutingVci
OBJECT-TYPE
Indicates the VCI used for the PNNI lowest level RCC, acceptable value is 32-65535, and 18 being the default.
1.3.6.1.4.1.351.140.1.2.1.1.1.12Integer32 (0..65535)read-createcurrent
cwspMaxVpiBits
OBJECT-TYPE
The maximum number of active VPI bits on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), this value has no meaning and is set to zero.
1.3.6.1.4.1.351.140.1.2.1.1.1.13Integer32 (0..12)read-onlycurrent
cwspMaxVciBits
OBJECT-TYPE
The maximum number of active VCI bits on this ATM Interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.14Integer32 (0..16)read-onlycurrent
cwspUniVersion
OBJECT-TYPE
An indication of the latest version of the ATM Forum UNI Signaling Specification that is supported on this ATM Interface. If this value is not present, a version of the UNI earlier than 3.1 is supported. The value of 'self(9)' indicates this entry is a voice port. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.
1.3.6.1.4.1.351.140.1.2.1.1.1.15INTEGER {uni20(1), uni30(2), uni31(3), uni40(4), ituDss2(5), frf4(6), unsupported(7), ip(8), self(9)}read-createcurrent
cwspNniVersion
OBJECT-TYPE
An indication of the latest version of the ATM Forum PNNI Signaling Specification that is supported on this ATM Interface. Note that the PNNI routing version is not determined through ILMI. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.
1.3.6.1.4.1.351.140.1.2.1.1.1.16INTEGER {iisp30(1), iisp31(2), pnni10(3), enni(4), aini(5), unsupported(7)}read-createcurrent
cwspUniType
OBJECT-TYPE
The type of the ATM device, either public or private.
1.3.6.1.4.1.351.140.1.2.1.1.1.17INTEGER {public(1), private(2)}read-createcurrent
cwspSide
OBJECT-TYPE
This object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type can be determined. An ATM End System shall take the value of user(1), and an ATM network node shall take the value of node(2).
1.3.6.1.4.1.351.140.1.2.1.1.1.18INTEGER {user(1), network(2)}read-createcurrent
cwspMaxP2pCalls
OBJECT-TYPE
Indicates the maximum number of point to point calls (including VCs and VPs allowed on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.19Integer32 (0..65535)read-createcurrent
cwspMaxP2mpRoots
OBJECT-TYPE
Indicates the maximum number of root VCs (for point-to-multipoint) allowed on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.20Integer32 (0..65535)read-createcurrent
cwspMaxP2mpLeafs
OBJECT-TYPE
Indicates the maximum number of leaf VCs (for point-to-multipoint) allowed on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.21Integer32 (0..65535)read-createcurrent
cwspMinSvccVpi
OBJECT-TYPE
Indicates the minimum SVCC VPI configured on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.22Integer32 (0..4095)read-createcurrent
cwspMaxSvccVpi
OBJECT-TYPE
Indicates the maximum SVCC VPI configured on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.23Integer32 (0..4095)read-createcurrent
cwspMinSvccVci
OBJECT-TYPE
Indicates the minimum SVCC VCI configured on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.24Integer32 (0..65535)read-createcurrent
cwspMaxSvccVci
OBJECT-TYPE
Indicates the maximum SVCC VCI configured on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.25Integer32 (35..65535)read-createcurrent
cwspMinSvpcVpi
OBJECT-TYPE
Indicates the minimum SVPC VPI configured on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.26Integer32 (1..4095)read-createcurrent
cwspMaxSvpcVpi
OBJECT-TYPE
Indicates the maximum SVPC VPI configured on the interface.
1.3.6.1.4.1.351.140.1.2.1.1.1.27Integer32 (1..4095)read-createcurrent
cwspEnhancedIisp
OBJECT-TYPE
Indicates whether the enhanced features for IISP are enabled or disabled.
1.3.6.1.4.1.351.140.1.2.1.1.1.28TruthValueread-createcurrent
cwspConfigTableRowStatus
OBJECT-TYPE
Used to create and delete the Interface. However, only createAndGo, destroy, active and notInService are supported. NMS should only use createAndGo to create a row and destroy to delete a row. The managed device will either return active or notInService for a row status.
1.3.6.1.4.1.351.140.1.2.1.1.1.29RowStatusread-createcurrent
cwspAddrPlanSupported
OBJECT-TYPE
The ATM address plan supported on an interface. This can only be modified if interface is public UNI. For all other interfaces, the value is aesa.
1.3.6.1.4.1.351.140.1.2.1.1.1.30INTEGER {both(1), aesa(2), e164(3)}read-createcurrent
cwspIlmiAttachmentPoint
OBJECT-TYPE
Indicates whether detection of loss of attachment procedures are enabled on this interface. When set to true, then standard ILMI procedures are employed to detect loss of attachment point. If set to false, then ILMI protocol on the interface does not detect the loss of attachment.
1.3.6.1.4.1.351.140.1.2.1.1.1.32TruthValueread-createcurrent
cwspIlmiLocalAttrStd
OBJECT-TYPE
Indicates whether on modification of local attributes, procedures as recommended by ILMI 4.0 specification are followed or cisco proprietery procedures are followed. When set to true, the standard ILMI procedures are followed.
1.3.6.1.4.1.351.140.1.2.1.1.1.33TruthValueread-createcurrent
cwspIlmiUCSMEnable
OBJECT-TYPE
Indicates whether ILMI user connection status monitoring is enabled or disabled.
1.3.6.1.4.1.351.140.1.2.1.1.1.34TruthValueread-createcurrent
cwspRoutingPriority
OBJECT-TYPE
This object is the routing priority to be assigned to connections which enter the network from this ingress interface, but does not carry the routing priority signaling in the SETUP message. SETUP message. A default routing priority of 8 is used if this object is not configured. A routing priority 1 is the highest priority for a user connection. A connection tagged with a routing priority of 1 is derouted ahead of connections tagged with other priority values.
1.3.6.1.4.1.351.140.1.2.1.1.1.35Integer32 (1..15)read-createcurrent
cwspSpvcAddress
OBJECT-TYPE
This object identifies the internal NSAP assigned to a port by the switch. a) The format is that of 13-byte node prefix and 7-byte port number. b) When the switch's node prefix is modified, the node prefix part of this variable is also changed accordingly. Note: the switch's node prefix cannot be changed if there are connections on the switch. c) The port number can be physical port identifier or the ifIndex of this port.
1.3.6.1.4.1.351.140.1.2.1.1.1.36CiscoWanNsapAtmAddressread-onlycurrent
cwspCacConfig
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.2
cwspCacConfigTable
OBJECT-TYPE
A table specifying the CAC(Connection Admission Control) information for each interface.
1.3.6.1.4.1.351.140.1.2.2.1not-accessiblecurrent
cwspCacConfigEntry
OBJECT-TYPE
An entry contains CAC information.
1.3.6.1.4.1.351.140.1.2.2.1.1not-accessiblecurrent
cwspUtilFactorCbr
OBJECT-TYPE
This is the booking factor for CBR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.1Integer32 (1..200)read-writecurrent
cwspUtilFactorRtVbr
OBJECT-TYPE
This is the booking factor for real time VBR service
1.3.6.1.4.1.351.140.1.2.2.1.1.2Integer32 (1..200)read-writecurrent
cwspUtilFactorNrtVbr
OBJECT-TYPE
This is the booking factor for non-real time VBR service
1.3.6.1.4.1.351.140.1.2.2.1.1.3Integer32 (1..200)read-writecurrent
cwspUtilFactorAbr
OBJECT-TYPE
This is the booking factor for ABR service
1.3.6.1.4.1.351.140.1.2.2.1.1.4Integer32 (1..200)read-writecurrent
cwspUtilFactorUbr
OBJECT-TYPE
This is the booking factor for UBR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.5Integer32 (1..200)read-writecurrent
cwspMaxBwCbr
OBJECT-TYPE
This is the maximum bandwidth for CBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.6Integer32 (0..1000000)read-writecurrent
cwspMaxBwRtVbr
OBJECT-TYPE
This is the maximum bandwidth for real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.7Integer32 (0..1000000)read-writecurrent
cwspMaxBwNrtVbr
OBJECT-TYPE
This is the maximum bandwidth for non-real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.8Integer32 (0..1000000)read-writecurrent
cwspMaxBwAbr
OBJECT-TYPE
This is the maximum bandwidth for ABR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.9Integer32 (0..1000000)read-writecurrent
cwspMaxBwUbr
OBJECT-TYPE
This is the maximum bandwidth for UBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.10Integer32 (0..1000000)read-writecurrent
cwspMinBwCbr
OBJECT-TYPE
This is the minimum bandwidth for CBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.11Integer32 (0..1000000)read-writecurrent
cwspMinBwRtVbr
OBJECT-TYPE
This is the minimum bandwidth for real time VBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.12Integer32 (0..1000000)read-writecurrent
cwspMinBwNrtVbr
OBJECT-TYPE
This is the minimum bandwidth for non-real time VBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.13Integer32 (0..1000000)read-writecurrent
cwspMinBwAbr
OBJECT-TYPE
This is the minimum bandwidth for ABR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.14Integer32 (0..1000000)read-writecurrent
cwspMinBwUbr
OBJECT-TYPE
This is the minimum bandwidth for UBR service in percentage. The value for this variable is always 0.
1.3.6.1.4.1.351.140.1.2.2.1.1.15Integer32 (0..1000000)read-onlycurrent
cwspMaxVcCbr
OBJECT-TYPE
This is the maximum number of VCs for CBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.16Integer32 (0..1000000)read-writecurrent
cwspMaxVcRtVbr
OBJECT-TYPE
This is the maximum number of VCs for real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.17Integer32 (0..1000000)read-writecurrent
cwspMaxVcNrtVbr
OBJECT-TYPE
This is the maximum number of VCs for non-real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.18Integer32 (0..1000000)read-writecurrent
cwspMaxVcAbr
OBJECT-TYPE
This is the maximum number of VCs for ABR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.19Integer32 (0..1000000)read-writecurrent
cwspMaxVcUbr
OBJECT-TYPE
This is the maximum number of VCs for UBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.20Integer32 (0..1000000)read-writecurrent
cwspMinVcCbr
OBJECT-TYPE
This is the minimum number of VCs for CBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. This variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.21Integer32 (0..1000000)read-writecurrent
cwspMinVcRtVbr
OBJECT-TYPE
This is the minimum number of VCs for real time VBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.22Integer32 (0..1000000)read-writecurrent
cwspMinVcNrtVbr
OBJECT-TYPE
This is the minimum number of VCs for non-real time VBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr,cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.23Integer32 (0..1000000)read-writecurrent
cwspMinVcAbr
OBJECT-TYPE
This is the minimum number of VCs for ABR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.24Integer32 (0..1000000)read-writecurrent
cwspMinVcUbr
OBJECT-TYPE
This is the minimum number of VCs for UBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.
1.3.6.1.4.1.351.140.1.2.2.1.1.25Integer32 (0..1000000)read-writecurrent
cwspMaxVcBwCbr
OBJECT-TYPE
This is the maximum bandwidth allowed for a VC for real time CBR service. The value is in the unit of cells per second.
1.3.6.1.4.1.351.140.1.2.2.1.1.26Integer32 (0..1000000)read-writecurrent
cwspMaxVcBwRtVbr
OBJECT-TYPE
This is the maximum bandwidth allowed for a VC for real time VBR service. The value is in the unit of cells per second.
1.3.6.1.4.1.351.140.1.2.2.1.1.27Integer32 (0..1000000)read-writecurrent
cwspMaxVcBwNrtVbr
OBJECT-TYPE
This is the maximum bandwidth allowed for a VC for non-real time VBR service. The value is in the unit of cells per second.
1.3.6.1.4.1.351.140.1.2.2.1.1.28Integer32 (0..1000000)read-writecurrent
cwspMaxVcBwAbr
OBJECT-TYPE
This is the maximum bandwidth allowed for a VC for ABR service. The value is in the unit of cells per second.
1.3.6.1.4.1.351.140.1.2.2.1.1.29Integer32 (0..1000000)read-writecurrent
cwspMaxVcBwUbr
OBJECT-TYPE
This is the maximum bandwidth allowed for UBR service. The value is in the unit of cells per second.
1.3.6.1.4.1.351.140.1.2.2.1.1.30Integer32 (0..1000000)read-writecurrent
cwspDefaultCdvtCbr
OBJECT-TYPE
This is the default CDVT for CBR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.31Integer32 (0..2147483647)read-writecurrent
cwspDefaultCdvtRtVbr
OBJECT-TYPE
This is the default CDVT real time VBR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.32Integer32 (0..2147483647)read-writecurrent
cwspDefaultCdvtNrtVbr
OBJECT-TYPE
This is the default CDVT non-real time VBR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.33Integer32 (0..2147483647)read-writecurrent
cwspDefaultCdvtAbr
OBJECT-TYPE
This is the default CDVT for ABR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.34Integer32 (0..2147483647)read-writecurrent
cwspDefaultCdvtUbr
OBJECT-TYPE
This is the default CDVT for UBR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.35Integer32 (0..2147483647)read-writecurrent
cwspDefaultMbsRtVbr
OBJECT-TYPE
This is the default MBS real time VBR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.36Integer32 (0..2147483647)read-writecurrent
cwspDefaultMbsNrtVbr
OBJECT-TYPE
This is the default MBS non-real time VBR service.
1.3.6.1.4.1.351.140.1.2.2.1.1.37Integer32 (0..2147483647)read-writecurrent
cwspSigConfig
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.3
cwspSigConfigTable
OBJECT-TYPE
This table specifies signaling configuration parameters.
1.3.6.1.4.1.351.140.1.2.3.1not-accessiblecurrent
cwspSigConfigEntry
OBJECT-TYPE
An entry in the signaling configuration table. Each entry indexed by the ifIndex of a port.
1.3.6.1.4.1.351.140.1.2.3.1.1not-accessiblecurrent
cwspSigCfgT301
OBJECT-TYPE
Timer started when ALERT message received at Call Received State. Normally, timer is stopped when CONNECT message is received. Clear call at first expiry.
1.3.6.1.4.1.351.140.1.2.3.1.1.1Integer32 (150..240)read-writecurrent
cwspSigCfgT303
OBJECT-TYPE
Timer started when SETUP message sent at Call Present State. Normally, timer is stopped when ALERT, CONNECT, RELEASE COMPLETE or CALL PROCEEDING message is received. Resend SETUP message and restart the timer at first expiry; Clear network connection and enter NULL state at second expiry.
1.3.6.1.4.1.351.140.1.2.3.1.1.2Integer32 (4..8)read-writecurrent
cwspSigCfgT308
OBJECT-TYPE
Timer started when RELEASE message sent at Release Indication State. Normally, timer is stopped when RELEASE COMPLETE or RELEASE message is received. Resend RELEASE and restart the timer at first expiry; Release call reference and enter NULL state at second expiry.
1.3.6.1.4.1.351.140.1.2.3.1.1.3Integer32 (20..45)read-writecurrent
cwspSigCfgT310
OBJECT-TYPE
Timer started when CALL PROCEEDING message received at Incoming Call Proceeding State. Normally, timer is stopped when ALERT, CONNECT or RELEASE message is received. Clear call at first expiry. Range from 10 to 20 seconds for UNI 3.0/3.1 with default of 10; 30 to 120 seconds for UNI 4.0 with default of 30, default number can be 10 or 30, 10 is used.
1.3.6.1.4.1.351.140.1.2.3.1.1.4Integer32 (10..120)read-writecurrent
cwspSigCfgT316
OBJECT-TYPE
Timer started when RESTART message sent Restart Request State. Normally, timer is stopped when RESTART ACK message is received. RESTART may be sent multiple times in both first or second expiry.
1.3.6.1.4.1.351.140.1.2.3.1.1.5Integer32 (90..300)read-writecurrent
cwspSigCfgT317
OBJECT-TYPE
Timer started when RESTART message received at Restart State. Normally, timer is stopped when Internal clearing of call references happen. Maintenance notification at first expiry. The value of this timer should be less than T316.
1.3.6.1.4.1.351.140.1.2.3.1.1.6Integer32 (60..300)read-writecurrent
cwspSigCfgT322
OBJECT-TYPE
Timer started when STATUS ENQUIRY message sent at any call state. Normally, timer is stopped when STATUS RELEASE or RELEASE COMPLETE message is received. STATUS ENQUIREY message may be resent several times in both first or second expiry.
1.3.6.1.4.1.351.140.1.2.3.1.1.7Integer32 (4..20)read-writecurrent
cwspSigCfgT397
OBJECT-TYPE
Timer started when ALERTING or PARTY ALERTING message received in point-to-multipoint call. Normally timer is stopped when ADD PARTY ACK message is received. Clear party at first expiry.
1.3.6.1.4.1.351.140.1.2.3.1.1.8Integer32 (180..240)read-writecurrent
cwspSigCfgT398
OBJECT-TYPE
Timer is started when DROP PARTY message sent at Drop Party Initiated State. Normally, timer is stopped when DROP PARTY ACK or RELEASE message is received. Send DROP PARTY ACK or RELEASE at first expiry.
1.3.6.1.4.1.351.140.1.2.3.1.1.9Integer32 (4..20)read-writecurrent
cwspSigCfgT399
OBJECT-TYPE
Timer is started when ADD PARTY message sent at Add Party Initiated State. Normally, timer is stopped when ADD PARTY ACK, ADD PARTY REJ or RELEASE message is received. Clear the party and enter NULL Party State at first expiry. Range from 14 to 28 seconds for UNI 3.0/3.1 with default of 14; 34 to 124 seconds for UNI 4.0 with default of 34, default can be 14 or 34, 14 is used.
1.3.6.1.4.1.351.140.1.2.3.1.1.10Integer32 (14..124)read-writecurrent
cwspSscopConfig
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.4
cwspSscopTable
OBJECT-TYPE
This table specifies SSCOP (Layer 2) configuration parameters.
1.3.6.1.4.1.351.140.1.2.4.1not-accessiblecurrent
cwspSscopEntry
OBJECT-TYPE
An entry in the SSCOP configuration table. Each entry indexed by the ifIndex of a port.
1.3.6.1.4.1.351.140.1.2.4.1.1not-accessiblecurrent
cwspSscopTmrCC
OBJECT-TYPE
This object contains the value for Connection control timer.
1.3.6.1.4.1.351.140.1.2.4.1.1.1Integer32 (0..2147483647)read-writecurrent
cwspSscopTmrKeepAlive
OBJECT-TYPE
This object contains the value for keep alive timer
1.3.6.1.4.1.351.140.1.2.4.1.1.2Integer32 (0..2147483647)read-writecurrent
cwspSscopTmrNoResp
OBJECT-TYPE
This object contains the value for no response timer.
1.3.6.1.4.1.351.140.1.2.4.1.1.3Integer32 (0..2147483647)read-writecurrent
cwspSscopTmrPoll
OBJECT-TYPE
This object contains the value for poll timer.
1.3.6.1.4.1.351.140.1.2.4.1.1.4Integer32 (0..2147483647)read-writecurrent
cwspSscopTmtIdle
OBJECT-TYPE
This object contains the value for idle timer.
1.3.6.1.4.1.351.140.1.2.4.1.1.5Integer32 (0..2147483647)read-writecurrent
cwspSscopMaxCC
OBJECT-TYPE
This object contains the upper limit for the number of transmissions of a BGN, END, ER or RS PDU.
1.3.6.1.4.1.351.140.1.2.4.1.1.6Integer32 (0..2147483647)read-writecurrent
cwspSscopMaxPD
OBJECT-TYPE
This object contains an upper limit for a counter which counts the number of SD PDUs transmitted between transmissions of POLL PDUs or the number of SD PDUs transmitted before the transmission of the first POLL PDU after POLL timer became active.
1.3.6.1.4.1.351.140.1.2.4.1.1.7Integer32 (0..2147483647)read-writecurrent
cwspSscopMaxSTAT
OBJECT-TYPE
This object contains an upper limit for the number of list elements placed in a STAT PDU.
1.3.6.1.4.1.351.140.1.2.4.1.1.8Integer32 (0..2147483647)read-writecurrent
cwspCallStats
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.5
cwspCallStatsTable
OBJECT-TYPE
This Table contains objects showing the Statistics for SVC/SPVC calls on a given interface.
1.3.6.1.4.1.351.140.1.2.5.1not-accessiblecurrent
cwspCallStatsEntry
OBJECT-TYPE
An entry contains SVC/SPVC call statistics
1.3.6.1.4.1.351.140.1.2.5.1.1not-accessiblecurrent
cwspCountReset
OBJECT-TYPE
Writing a 2 to this object resets all counters.
1.3.6.1.4.1.351.140.1.2.5.1.1.1INTEGER {noop(1), reset(2)}read-writecurrent
cwspInCallAttempts
OBJECT-TYPE
This object shows the number of incoming Signaling messages (Setup and Add Party) received by the switching node on this interface for Call establishment.
1.3.6.1.4.1.351.140.1.2.5.1.1.2Counter32read-onlycurrent
cwspInCallEstabs
OBJECT-TYPE
This object shows the number of incoming Signaling Messages (Connect and Add Party Ack) received by the switching node on this interface which marks that a call has been successfully established.
1.3.6.1.4.1.351.140.1.2.5.1.1.3Counter32read-onlycurrent
cwspInCallFailures
OBJECT-TYPE
This object shows the total number of incoming Point-to-Point (p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts failed on this interface.
1.3.6.1.4.1.351.140.1.2.5.1.1.4Counter32read-onlycurrent
cwspInFilterFailures
OBJECT-TYPE
This object shows the number of incoming Point-to-Point(p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts which failed due to address filtering on this interface.
1.3.6.1.4.1.351.140.1.2.5.1.1.5Counter32read-onlycurrent
cwspInRouteFailures
OBJECT-TYPE
This object shows the number of incoming Point-to-Point(p2p) and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this interface which failed because there was no route to the destination available.
1.3.6.1.4.1.351.140.1.2.5.1.1.6Counter32read-onlycurrent
cwspInResrcFailures
OBJECT-TYPE
This object shows the number of incoming Point-to-Point(p2p) and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this interface which failed because there were not enough resources as requested in the parameters of the call.
1.3.6.1.4.1.351.140.1.2.5.1.1.7Counter32read-onlycurrent
cwspInTimerFailures
OBJECT-TYPE
This object shows the number of signaling timers timed out for incoming Point-to-Point(p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC calls on this interface.
1.3.6.1.4.1.351.140.1.2.5.1.1.8Counter32read-onlycurrent
cwspInCrankbacks
OBJECT-TYPE
This object shows the number of Crankback IEs received on this interface for incoming Point-to-Point(p2p) and Point-to-MultiPoint (p2mp) SVC/SPVC call attempts.
1.3.6.1.4.1.351.140.1.2.5.1.1.9Counter32read-onlycurrent
cwspOutCallAttempts
OBJECT-TYPE
This object shows the number of outgoing Signaling messages (Setup and Add Party) on this interface for Call establishment.
1.3.6.1.4.1.351.140.1.2.5.1.1.10Counter32read-onlycurrent
cwspOutCallEstabs
OBJECT-TYPE
This object shows the number of outgoing Signaling messages (Connect and Add Party Ack) which mark the call being established on this interface
1.3.6.1.4.1.351.140.1.2.5.1.1.11Counter32read-onlycurrent
cwspOutCallFailures
OBJECT-TYPE
This object shows the total number of outgoing Signaling messages for Point-to-Point and Point-to-MultiPoint call establishment on this interface which failed.
1.3.6.1.4.1.351.140.1.2.5.1.1.12Counter32read-onlycurrent
cwspOutFilterFailures
OBJECT-TYPE
This object shows the number of outgoing Signaling messages for call establishment on this interface which failed the address filtering.
1.3.6.1.4.1.351.140.1.2.5.1.1.13Counter32read-onlycurrent
cwspOutRouteFailures
OBJECT-TYPE
This object shows the number of outgoing Signaling messages for call establishment on this interface which failed because the route was not available.
1.3.6.1.4.1.351.140.1.2.5.1.1.14Counter32read-onlycurrent
cwspOutResrcFailures
OBJECT-TYPE
This object shows the number of outgoing Signaling messages for call establishment on this interface which failed because the resource requested was not available.
1.3.6.1.4.1.351.140.1.2.5.1.1.15Counter32read-onlycurrent
cwspOutTimerFailures
OBJECT-TYPE
This object shows the number of Signaling timers timed-out on this interface for outgoing signaling messages.
1.3.6.1.4.1.351.140.1.2.5.1.1.16Counter32read-onlycurrent
cwspOutCrankbacks
OBJECT-TYPE
This object shows the number of Crankback IEs being sent on this interface for outgoing signaling Release messages. This is generated on the node which generates the Crankback IEs.
1.3.6.1.4.1.351.140.1.2.5.1.1.17Counter32read-onlycurrent
cwspSigStats
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.6
cwspSigStatsTable
OBJECT-TYPE
This table contains signaling statistics counters
1.3.6.1.4.1.351.140.1.2.6.1not-accessiblecurrent
cwspSigStatsEntry
OBJECT-TYPE
An entry contains signaling statistics.
1.3.6.1.4.1.351.140.1.2.6.1.1not-accessiblecurrent
cwspSigCounterReset
OBJECT-TYPE
Writing a 2 to this object resets the all Sig counters.
1.3.6.1.4.1.351.140.1.2.6.1.1.1INTEGER {noop(1), reset(2)}read-writecurrent
cwspCallProcRcv
OBJECT-TYPE
Number of CALL PROCEEDING messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.2Counter32read-onlycurrent
cwspConnectRcv
OBJECT-TYPE
Number of CONNECT messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.3Counter32read-onlycurrent
cwspConnectAckRcv
OBJECT-TYPE
Number of CONNECT ACK messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.4Counter32read-onlycurrent
cwspSetupRcv
OBJECT-TYPE
Number of SETUP messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.5Counter32read-onlycurrent
cwspReleaseRcv
OBJECT-TYPE
Number of RELEASE messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.6Counter32read-onlycurrent
cwspReleaseComplRcv
OBJECT-TYPE
Number of RELEASE COMPLETE messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.7Counter32read-onlycurrent
cwspRestartRcv
OBJECT-TYPE
Number of RESTART messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.8Counter32read-onlycurrent
cwspRestartAckRcv
OBJECT-TYPE
Number of RESTART ACK messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.9Counter32read-onlycurrent
cwspStatusRcv
OBJECT-TYPE
Number of STATUS messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.10Counter32read-onlycurrent
cwspStatusEnqRcv
OBJECT-TYPE
Number of STATUS ENQUIRY messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.11Counter32read-onlycurrent
cwspNotifyRcv
OBJECT-TYPE
Number of NOTIFY messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.12Counter32read-onlycurrent
cwspAlertRcv
OBJECT-TYPE
Number of ALERT messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.13Counter32read-onlycurrent
cwspProgressRcv
OBJECT-TYPE
Number of PROGRESS messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.14Counter32read-onlycurrent
cwspAddPtyRcv
OBJECT-TYPE
Number of ADD PARTY messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.15Counter32read-onlycurrent
cwspAddPtyAckRcv
OBJECT-TYPE
Number of ADD PARTY ACK messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.16Counter32read-onlycurrent
cwspAddPtyRejRcv
OBJECT-TYPE
Number of ADD PARTY REJECT messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.17Counter32read-onlycurrent
cwspDropPtyRcv
OBJECT-TYPE
Number of DROP PARTY messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.18Counter32read-onlycurrent
cwspIncorrectMsgRcv
OBJECT-TYPE
Number of Incorrect messages received on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.20Counter32read-onlycurrent
cwspTimerExpiries
OBJECT-TYPE
Number of timeouts occurred on this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.21Counter32read-onlycurrent
cwspLastCause
OBJECT-TYPE
to indicate the last cause of release or cranckback.
1.3.6.1.4.1.351.140.1.2.6.1.1.22Counter32read-onlycurrent
cwspLastDiagnostic
OBJECT-TYPE
to indicate the last diagnostic of release or cranckback.
1.3.6.1.4.1.351.140.1.2.6.1.1.23Integer32 (-2147483648..214743647)read-onlycurrent
cwspCallProcXmt
OBJECT-TYPE
Number of CALL PROCEEDING messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.24Counter32read-onlycurrent
cwspConnectXmt
OBJECT-TYPE
Number of CONNECT messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.25Counter32read-onlycurrent
cwspConnectAckXmt
OBJECT-TYPE
Number of CONNECT ACK messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.26Counter32read-onlycurrent
cwspSetupXmt
OBJECT-TYPE
Number of SETUP messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.27Counter32read-onlycurrent
cwspReleaseXmt
OBJECT-TYPE
Number of RELEASE messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.28Counter32read-onlycurrent
cwspReleaseComplXmt
OBJECT-TYPE
Number of RELEASE COMPLETE messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.29Counter32read-onlycurrent
cwspRestartXmt
OBJECT-TYPE
Number of RESTART messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.30Counter32read-onlycurrent
cwspRestartAckXmt
OBJECT-TYPE
Number of RESTART ACK messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.31Counter32read-onlycurrent
cwspStatusXmt
OBJECT-TYPE
Number of STATUS messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.32Counter32read-onlycurrent
cwspStatusEnqXmt
OBJECT-TYPE
Number of STATUS ENQUIRY messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.33Counter32read-onlycurrent
cwspNotifyXmt
OBJECT-TYPE
Number of NOTIFY messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.34Counter32read-onlycurrent
cwspAlertXmt
OBJECT-TYPE
Number of ALERT messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.35Counter32read-onlycurrent
cwspProgressXmt
OBJECT-TYPE
Number of PROGRESS messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.36Counter32read-onlycurrent
cwspAddPtyXmt
OBJECT-TYPE
Number of ADD PARTY messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.37Counter32read-onlycurrent
cwspAddPtyAckXmt
OBJECT-TYPE
Number of ADD PARTY ACK messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.38Counter32read-onlycurrent
cwspAddPtyRejXmt
OBJECT-TYPE
Number of ADD PARTY REJECT messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.39Counter32read-onlycurrent
cwspDropPtyXmt
OBJECT-TYPE
Number of DROP PARTY messages transmitted from this interface.
1.3.6.1.4.1.351.140.1.2.6.1.1.40Counter32read-onlycurrent
cwspSscopStatus
OBJECT-TYPE
Sscop link status on an NNI interface, object is meaningful along with ciscoWANSscopLinkChange trap.
1.3.6.1.4.1.351.140.1.2.6.1.1.42INTEGER {up(1), down(2)}read-onlycurrent
cwspSscopStats
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.7
cwspSscopStatsTable
OBJECT-TYPE
This table contains SSCOP (Layer 2) statistics counters.
1.3.6.1.4.1.351.140.1.2.7.1not-accessiblecurrent
cwspSscopStatsEntry
OBJECT-TYPE
An entry contains SSCOP (Layer 2) statistics.
1.3.6.1.4.1.351.140.1.2.7.1.1not-accessiblecurrent
cwspSscopCounterReset
OBJECT-TYPE
This object specifies whether the SSCOP statistics collected for this interface needs to be reset.
1.3.6.1.4.1.351.140.1.2.7.1.1.1INTEGER {noop(1), reset(2)}read-writecurrent
cwspSscopIgnoredPduRcv
OBJECT-TYPE
This object stores the number of SSCOP PDUs that are received but ignored due to incorrect size, invalid PDU, unknown PDU type.
1.3.6.1.4.1.351.140.1.2.7.1.1.2Counter32read-onlycurrent
cwspSscopBgnRcv
OBJECT-TYPE
This object stores the number of SSCOP BGN PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.3Counter32read-onlycurrent
cwspSscopBgakRcv
OBJECT-TYPE
This object stores the number of SSCOP BGN ACK PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.4Counter32read-onlycurrent
cwspSscopEndRcv
OBJECT-TYPE
This object stores the number of SSCOP END PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.5Counter32read-onlycurrent
cwspSscopEndakRcv
OBJECT-TYPE
This object stores the number of SSCOP END ACK PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.6Counter32read-onlycurrent
cwspSscopRsRcv
OBJECT-TYPE
This object stores the number of SSCOP RS(Resync) PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.7Counter32read-onlycurrent
cwspSscopRsakRcv
OBJECT-TYPE
This object stores the number of SSCOP RS(Resync) ACK PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.8Counter32read-onlycurrent
cwspSscopBgrejRcv
OBJECT-TYPE
This object stores the number of SSCOP BGN REJ PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.9Counter32read-onlycurrent
cwspSscopSdRcv
OBJECT-TYPE
This object stores the number of SSCOP SD (Sequenced Data) PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.10Counter32read-onlycurrent
cwspSscopSdpRcv
OBJECT-TYPE
This object stores the number of SSCOP SDP (Sequenced Data with Poll) PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.11Counter32read-onlycurrent
cwspSscopPollRcv
OBJECT-TYPE
This object stores the number of SSCOP POLL PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.12Counter32read-onlycurrent
cwspSscopStatRcv
OBJECT-TYPE
This object stores the number of SSCOP STAT PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.13Counter32read-onlycurrent
cwspSscopUstatRcv
OBJECT-TYPE
This object stores the number of SSCOP USTAT (Unsolicited STAT) PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.14Counter32read-onlycurrent
cwspSscopUdRcv
OBJECT-TYPE
This object stores the number of SSCOP UD (Unit data) PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.15Counter32read-onlycurrent
cwspSscopMdRcv
OBJECT-TYPE
This object stores the number of SSCOP MD (Management data) PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.16Counter32read-onlycurrent
cwspSscopErakRcv
OBJECT-TYPE
This object stores the number of SSCOP ER ACK (error recovery ack) PDUs received at this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.17Counter32read-onlycurrent
cwspSscopBgnXmt
OBJECT-TYPE
This object stores the number of SSCOP BGN PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.18Counter32read-onlycurrent
cwspSscopBgakXmt
OBJECT-TYPE
This object stores the number of SSCOP BGN ACK PDUs transmitted on this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.19Counter32read-onlycurrent
cwspSscopEndXmt
OBJECT-TYPE
This object stores the number of SSCOP END PDUs transmitted on this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.20Counter32read-onlycurrent
cwspSscopEndakXmt
OBJECT-TYPE
This object stores the number of SSCOP END ACK PDUs transmitted on this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.21Counter32read-onlycurrent
cwspSscopRsXmt
OBJECT-TYPE
This object stores the number of SSCOP RS (Resync) PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.22Counter32read-onlycurrent
cwspSscopRsakXmt
OBJECT-TYPE
This object stores the number of SSCOP RS (Resync) ACK PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.23Counter32read-onlycurrent
cwspSscopBgrejXmt
OBJECT-TYPE
This object stores the number of SSCOP BGN REJ PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.24Counter32read-onlycurrent
cwspSscopSdXmt
OBJECT-TYPE
This object stores the number of SSCOP SD transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.25Counter32read-onlycurrent
cwspSscopSdpXmt
OBJECT-TYPE
This object stores the number of SSCOP SDP PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.26Counter32read-onlycurrent
cwspSscopPollXmt
OBJECT-TYPE
This object stores the number of SSCOP POLL PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.27Counter32read-onlycurrent
cwspSscopStatXmt
OBJECT-TYPE
This object stores the number of SSCOP STAT PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.28Counter32read-onlycurrent
cwspSscopUstatXmt
OBJECT-TYPE
This object stores the number of SSCOP USTAT PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.29Counter32read-onlycurrent
cwspSscopUdXmt
OBJECT-TYPE
This object stores the number of SSCOP UD PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.30Counter32read-onlycurrent
cwspSscopMdXmt
OBJECT-TYPE
This object stores the number of SSCOP MD PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.31Counter32read-onlycurrent
cwspSscopErakXmt
OBJECT-TYPE
This object stores the number of SSCOP ER(error recovery) ACK PDUs transmitted over this interface.
1.3.6.1.4.1.351.140.1.2.7.1.1.32Counter32read-onlycurrent
cwspCall
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.8
cwspCallTable
OBJECT-TYPE
This Table contains the objects which show parameters associated with a Point-to-Point(p2p) or Point-to-MultiPoint (p2mp) SVC/SPVC call.
1.3.6.1.4.1.351.140.1.2.8.1not-accessiblecurrent
cwspCallEntry
OBJECT-TYPE
This object shows the multiple key index to get the Call record information. The key comprise of Interface Index, VPI/VCI value and Call Reference Value for the call.
1.3.6.1.4.1.351.140.1.2.8.1.1not-accessiblecurrent
cwspCallVpi
OBJECT-TYPE
This object shows the VPI value of the call on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.1Integer32 (0..4095)not-accessiblecurrent
cwspCallVci
OBJECT-TYPE
This object shows The VCI value of the call on this interface. The value should be in the range of 32-65535 (0=SPVP).
1.3.6.1.4.1.351.140.1.2.8.1.1.2Integer32 (0..65535)not-accessiblecurrent
cwspCallLeafReference
OBJECT-TYPE
This object shows the value of the Leaf Reference (EndPointReference) of the Call on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.3Integer32 (0..65535)not-accessiblecurrent
cwspCallCallRef
OBJECT-TYPE
This object shows the Call Reference value of the call on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.4Integer32 (0..2147483647)read-onlycurrent
cwspCallCallingAddress
OBJECT-TYPE
This object shows the Calling Party Address of the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.5AtmAddressread-onlycurrent
cwspCallCalledAddress
OBJECT-TYPE
This object shows the Called Party Address of the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.6AtmAddressread-onlycurrent
cwspCallCallingSubAddr
OBJECT-TYPE
This object shows the Calling Party Subaddress of the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.7AtmAddressread-onlycurrent
cwspCallCalledSubAddr
OBJECT-TYPE
This object shows the Called Party Subaddress of the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.8AtmAddressread-onlycurrent
cwspCallOtherIntfIndex
OBJECT-TYPE
This object shows the Other Interface of the call. Generally, this would be the outgoing/egress interface for the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.9Integer32 (0..2147483647)read-onlycurrent
cwspCallOtherIntfVpi
OBJECT-TYPE
This object shows the VPI of the call on the partner interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.10Integer32 (0..4095)read-onlycurrent
cwspCallOtherIntfVci
OBJECT-TYPE
This object shows The VCI of the call on the partner o interface. The value should be in the range of 32-65535 (0=SPVP).
1.3.6.1.4.1.351.140.1.2.8.1.1.11Integer32 (0..65535)read-onlycurrent
cwspCallOtherIntfCallRef
OBJECT-TYPE
This object shows the Call Reference of the call on the partner interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.12Integer32 (0..2147483647)read-onlycurrent
cwspCallType
OBJECT-TYPE
This object shows the Call Type for the call on this interface. The call type could be SVC or SPVC.
1.3.6.1.4.1.351.140.1.2.8.1.1.13INTEGER {svc(1), spvc(2)}read-onlycurrent
cwspCallStartTime
OBJECT-TYPE
This object shows the start time of the call. This is the timestamp when the Setup Message (or Add Party Message) was first received on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.14TimeStampread-onlycurrent
cwspCallBearerClass
OBJECT-TYPE
This object shows the Bearer Class of the Call. It could be BcobA, BcobC, BcobX or VP Service
1.3.6.1.4.1.351.140.1.2.8.1.1.15INTEGER {bcobA(1), bcobC(2), bcobX(3), vp(4)}read-onlycurrent
cwspCallServiceCategory
OBJECT-TYPE
This object shows the service category of the call, which can be CBR, rtVBR, nrtVBR, ABR or UBR
1.3.6.1.4.1.351.140.1.2.8.1.1.16INTEGER {cbr(1), rtVbr(2), nrtVbr(3), abr(4), ubr(5)}read-onlycurrent
cwspCallCastType
OBJECT-TYPE
This object shows the Cast Type of the call, which can be a Point-to-Point (p2p), Point-to-MultiPoint (p2mp) or MultiPoint-to-Point (mp2p) call.
1.3.6.1.4.1.351.140.1.2.8.1.1.17INTEGER {p2p(1), p2mp(2), mp2p(3)}read-onlycurrent
cwspCallClipSusceptibility
OBJECT-TYPE
This object shows Susceptibility to Clipping. It can be susceptible or not susceptible.
1.3.6.1.4.1.351.140.1.2.8.1.1.18INTEGER {yes(1), no(2)}read-onlycurrent
cwspCallFwdConformance
OBJECT-TYPE
This object shows the conformance of the call to the traffic sets in the forward direction. It can be CBR.1, CBR.2, CBR.3, VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in ATMF Traffic Management 4.0 specification.
1.3.6.1.4.1.351.140.1.2.8.1.1.19INTEGER {cbr1(1), cbr2(2), cbr3(3), vbr1(4), vbr2(5), vbr3(6), abr(7), ubr1(8), ubr2(9)}read-onlycurrent
cwspCallFwdPcr
OBJECT-TYPE
This object shows the Peak Cell Rate(pcr) in the forward direction of the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.20Integer32 (0..2147483647)read-onlycurrent
cwspCallFwdScr
OBJECT-TYPE
This object shows the Sustainable Cell Rate(scr) in the forward direction of the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.21Integer32 (0..2147483647)read-onlycurrent
cwspCallFwdMbs
OBJECT-TYPE
This object shows the Maximum Burst Size(mbs) of the call in the forward direction.
1.3.6.1.4.1.351.140.1.2.8.1.1.22Integer32 (0..2147483647)read-onlycurrent
cwspCallFwdCdvt
OBJECT-TYPE
This object shows the Cell Delay Variation Tolerance(cdvt) in the forward direction for the call, for PCR and SCR.
1.3.6.1.4.1.351.140.1.2.8.1.1.23Integer32 (0..2147483647)read-onlycurrent
cwspCallFwdFrameDiscard
OBJECT-TYPE
This object shows if the Frame Discard is enabled or disabled in the forward direction for the call
1.3.6.1.4.1.351.140.1.2.8.1.1.24INTEGER {yes(1), no(2)}read-onlycurrent
cwspCallBwdConformance
OBJECT-TYPE
This object shows the conformance of the call to the traffic sets in the backward direction. It can be CBR.1, CBR.2, CBR.3, VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in ATMF Traffic Management 4.0 specification.
1.3.6.1.4.1.351.140.1.2.8.1.1.25INTEGER {cbr1(1), cbr2(2), cbr3(3), vbr1(4), vbr2(5), vbr3(6), abr(7), ubr1(8), ubr2(9)}read-onlycurrent
cwspCallBwdPcr
OBJECT-TYPE
This object shows the Peak Cell Rate in the backward direction of the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.26Integer32 (0..2147483647)read-onlycurrent
cwspCallBwdScr
OBJECT-TYPE
This object shows the Sustainable Cell Rate in the backward direction of the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.27Integer32 (0..2147483647)read-onlycurrent
cwspCallBwdMbs
OBJECT-TYPE
This object shows the Maximum Burst Size of the call in the backward direction.
1.3.6.1.4.1.351.140.1.2.8.1.1.28Integer32 (0..2147483647)read-onlycurrent
cwspCallBwdCdvt
OBJECT-TYPE
This object shows the Cell Delay Variation Tolerance in the backward direction for the call, for PCR and SCR.
1.3.6.1.4.1.351.140.1.2.8.1.1.29Integer32 (0..2147483647)read-onlycurrent
cwspCallBwdFrameDiscard
OBJECT-TYPE
This object shows if the Frame Discard is enabled or disabled in the backward direction for the call.
1.3.6.1.4.1.351.140.1.2.8.1.1.30INTEGER {yes(1), no(2)}read-onlycurrent
cwspCallMaxCtd
OBJECT-TYPE
This object shows the Maximum Cell Transfer Delay for the call on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.31Integer32 (0..2147483647)read-onlycurrent
cwspCallMaxFwdCdv
OBJECT-TYPE
This object shows the Maximum Cell Delay Variation in the forward direction for this call on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.32Integer32 (0..2147483647)read-onlycurrent
cwspCallMaxFwdClr
OBJECT-TYPE
This object shows the Maximum Cell Loss Ratio in the forward direction for this call on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.33Integer32 (0..2147483647)read-onlycurrent
cwspCallMaxBwdCdv
OBJECT-TYPE
This object shows the Maximum Cell Delay Variation in the backward direction for this call on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.34Integer32 (0..2147483647)read-onlycurrent
cwspCallMaxBwdClr
OBJECT-TYPE
This object shows the Maximum Cell Loss Ratio in the backward direction for this call on this interface.
1.3.6.1.4.1.351.140.1.2.8.1.1.35Integer32 (0..2147483647)read-onlycurrent
cwspAbrCall
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.9
cwspAbrCallTable
OBJECT-TYPE
This table contains information for ABR calls on an interface.
1.3.6.1.4.1.351.140.1.2.9.1not-accessiblecurrent
cwspAbrCallEntry
OBJECT-TYPE
An entry in the table, containing information about an ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1not-accessiblecurrent
cwspAbrCallVpi
OBJECT-TYPE
The VPI value of the ABR call on this interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.1Integer32 (0..4095)not-accessiblecurrent
cwspAbrCallVci
OBJECT-TYPE
The VCI value of the ABR call on this interface. The value should be in the range of 32-65535 (0=SPVP).
1.3.6.1.4.1.351.140.1.2.9.1.1.2Integer32 (0..65535)not-accessiblecurrent
cwspAbrCallCallRef
OBJECT-TYPE
The Call Reference value of the ABR call on this interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.3Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallClgAddress
OBJECT-TYPE
The Calling Party Address of the ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1.4AtmAddressread-onlycurrent
cwspAbrCallCldAddress
OBJECT-TYPE
The Called Party Address of the ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1.5AtmAddressread-onlycurrent
cwspAbrCallClgSubAddr
OBJECT-TYPE
The Calling Party Subaddress of the ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1.6AtmAddressread-onlycurrent
cwspAbrCallCldSubAddr
OBJECT-TYPE
The Called Party Subaddress of the ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1.7AtmAddressread-onlycurrent
cwspAbrCallOtherIntfIndex
OBJECT-TYPE
The Other Interface ID of the ABR call. Generally this would be the outgoing/egress interface for the call.
1.3.6.1.4.1.351.140.1.2.9.1.1.8Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallOtherIntfVpi
OBJECT-TYPE
The VPI value of the ABR call on the partner interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.9Integer32 (0..4095)read-onlycurrent
cwspAbrCallOtherIntfVci
OBJECT-TYPE
The VCI value of the ABR call on the partner interface. The value should be in the range of 32-65535 (0=SPVP).
1.3.6.1.4.1.351.140.1.2.9.1.1.10Integer32 (0..65535)read-onlycurrent
cwspAbrCallOtherIntfCallRef
OBJECT-TYPE
The Call Reference of the ABR call on the partner interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.11Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallType
OBJECT-TYPE
The Call Type for the ABR call on this interface. The call type could be SVC or SPVC.
1.3.6.1.4.1.351.140.1.2.9.1.1.12INTEGER {svc(1), spvc(2)}read-onlycurrent
cwspAbrCallStartTime
OBJECT-TYPE
The start time of the ABR call. This is the timestamp when the Setup Message (or Add Party Message) was first received on this interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.13TimeStampread-onlycurrent
cwspAbrCallBearerClass
OBJECT-TYPE
The Bearer Class of the ABR call. It could be BCOB-A, BCOB-C, BCOB-X or VP Service.
1.3.6.1.4.1.351.140.1.2.9.1.1.14INTEGER {bcobA(1), bcobC(2), bcobX(3), vp(4)}read-onlycurrent
cwspAbrCallServiceCategory
OBJECT-TYPE
The Service Category of the ABR call, which is ABR.
1.3.6.1.4.1.351.140.1.2.9.1.1.15INTEGER {abr(4)}read-onlycurrent
cwspAbrCallCastType
OBJECT-TYPE
The Cast Type of the ABR call, which can only be Point-to-Point(p2p) call.
1.3.6.1.4.1.351.140.1.2.9.1.1.16INTEGER {p2p(1)}read-onlycurrent
cwspAbrCallClipSusceptibility
OBJECT-TYPE
Susceptibility to Clipping. It can be susceptible or not susceptible.
1.3.6.1.4.1.351.140.1.2.9.1.1.17INTEGER {yes(1), no(2)}read-onlycurrent
cwspAbrCallFwdConformance
OBJECT-TYPE
The Conformance of the ABR call to the traffic sets in the forward direction. It can only be ABR as defined in ATMF Traffic Management 4.0 specification.
1.3.6.1.4.1.351.140.1.2.9.1.1.18INTEGER {abr(7)}read-onlycurrent
cwspAbrCallFwdPcr
OBJECT-TYPE
The Peak Cell Rate for the ABR call in the forward direction.
1.3.6.1.4.1.351.140.1.2.9.1.1.19Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallFwdMcr
OBJECT-TYPE
The Minimum Cell Rate for the ABR call in the forward direction.
1.3.6.1.4.1.351.140.1.2.9.1.1.20Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallFwdIcr
OBJECT-TYPE
The Initial Cell Rate for the ABR call in the forward direction. This is the rate at which the source starts, both initially and after an idle period. The value must not be larger than PCR, and is usually lower.
1.3.6.1.4.1.351.140.1.2.9.1.1.21Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallFwdRif
OBJECT-TYPE
The Rate Increase Factor for the ABR call in the forward direction. This controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase. The default value is rifOneOver16(12).
1.3.6.1.4.1.351.140.1.2.9.1.1.22INTEGER {rifOneOver32768(1), rifOneOver16384(2), rifOneOver8192(3), rifOneOver4096(4), rifOneOver2048(5), rifOneOver1024(6), rifOneOver512(7), rifOneOver256(8), rifOneOver128(9), rifOneOver64(10), rifOneOver32(11), rifOneOver16(12), rifOneOver8(13), rifOneOver4(14), rifOneOver2(15), rifOne(16)}read-onlycurrent
cwspAbrCallFwdRdf
OBJECT-TYPE
The Rate Decrease Factor for the ABR call in the forward direction. This controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default value is rdfOneOver16(12).
1.3.6.1.4.1.351.140.1.2.9.1.1.23INTEGER {rdfOneOver32768(1), rdfOneOver16384(2), rdfOneOver8192(3), rdfOneOver4096(4), rdfOneOver2048(5), rdfOneOver1024(6), rdfOneOver512(7), rdfOneOver256(8), rdfOneOver128(9), rdfOneOver64(10), rdfOneOver32(11), rdfOneOver16(12), rdfOneOver8(13), rdfOneOver4(14), rdfOneOver2(15), rdfOne(16)}read-onlycurrent
cwspAbrCallFwdTbe
OBJECT-TYPE
The Transient Buffer Exposure for the ABR call in the forward direction. This is the negotiated number of cells that the network would like to limit the source to sending during setup periods, before the first RM-cell returns.
1.3.6.1.4.1.351.140.1.2.9.1.1.24Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallFwdNrm
OBJECT-TYPE
The Maximum Number of Cells a source may send for each forward RM-cell in the forward direction for the ABR call. The default value is nrm32(5).
1.3.6.1.4.1.351.140.1.2.9.1.1.25INTEGER {nrm2(1), nrm4(2), nrm8(3), nrm16(4), nrm32(5), nrm64(6), nrm128(7), nrm256(8)}read-onlycurrent
cwspAbrCallFwdTrm
OBJECT-TYPE
The Upper Bound on the time between forward RM-cells in the forward direction for the ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1.26INTEGER {trm0point78125(1), trm1point5625(2), trm3point125(3), trm6point25(4), trm12point5(5), trm25(6), trm50(7), trm100(8)}read-onlycurrent
cwspAbrCallFwdAdtf
OBJECT-TYPE
The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR call in the forward direction. This is the time permitted between sending RM-cells before the rate is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).
1.3.6.1.4.1.351.140.1.2.9.1.1.27Integer32 (1..1023)read-onlycurrent
cwspAbrCallFwdCdf
OBJECT-TYPE
The Cutoff Decrease Factor for the ABR call in the forward direction. This controls the decrease in Allowed Cell Rate (ACR) associated with missing RM-cell count (CRM). Larger values result in faster rate decrease. The default value is cdfOneOver16(4).
1.3.6.1.4.1.351.140.1.2.9.1.1.28INTEGER {cdf0(1), cdfOneOver64(2), cdfOneOver32(3), cdfOneOver16(4), cdfOneOver8(5), cdfOneOver4(6), cdfOneOver2(7), cdfOne(8)}read-onlycurrent
cwspAbrCallFwdFrameDiscard
OBJECT-TYPE
Whether Frame Discard is enabled or disabled in the forward direction for the ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1.29INTEGER {yes(1), no(2)}read-onlycurrent
cwspAbrCallBwdPcr
OBJECT-TYPE
The Peak Cell Rate for the ABR call in the backward direction.
1.3.6.1.4.1.351.140.1.2.9.1.1.30Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallBwdMcr
OBJECT-TYPE
The Minimum Cell Rate for the ABR call in the backward direction.
1.3.6.1.4.1.351.140.1.2.9.1.1.31Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallBwdIcr
OBJECT-TYPE
The Initial Cell Rate for the ABR call in the backward direction. This is the rate at which the source starts, both initially and after an idle period. The value must not be larger than PCR, and is usually lower.
1.3.6.1.4.1.351.140.1.2.9.1.1.32Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallBwdRif
OBJECT-TYPE
The Rate Increase Factor for the ABR call in the backward direction. This controls the rate at which the rate increases, when a forward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase. The default value is rifOneOver16(12).
1.3.6.1.4.1.351.140.1.2.9.1.1.33INTEGER {rifOneOver32768(1), rifOneOver16384(2), rifOneOver8192(3), rifOneOver4096(4), rifOneOver2048(5), rifOneOver1024(6), rifOneOver512(7), rifOneOver256(8), rifOneOver128(9), rifOneOver64(10), rifOneOver32(11), rifOneOver16(12), rifOneOver8(13), rifOneOver4(14), rifOneOver2(15), rifOne(16)}read-onlycurrent
cwspAbrCallBwdRdf
OBJECT-TYPE
The Rate Decrease Factor for the ABR call in the backward direction. This controls the rate decrease which occurs when forward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default value is rdfOneOver16(12).
1.3.6.1.4.1.351.140.1.2.9.1.1.34INTEGER {rdfOneOver32768(1), rdfOneOver16384(2), rdfOneOver8192(3), rdfOneOver4096(4), rdfOneOver2048(5), rdfOneOver1024(6), rdfOneOver512(7), rdfOneOver256(8), rdfOneOver128(9), rdfOneOver64(10), rdfOneOver32(11), rdfOneOver16(12), rdfOneOver8(13), rdfOneOver4(14), rdfOneOver2(15), rdfOne(16)}read-onlycurrent
cwspAbrCallBwdTbe
OBJECT-TYPE
The Transient Buffer Exposure for the ABR call in the backward direction. This is the negotiated number of cells that the network would like to limit the source to sending during setup periods, before the first RM-cell returns.
1.3.6.1.4.1.351.140.1.2.9.1.1.35Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallBwdNrm
OBJECT-TYPE
The Maximum Number of Cells a source may send for each forward RM-cell in the backward direction for the ABR call. The default value is nrm32(5).
1.3.6.1.4.1.351.140.1.2.9.1.1.36INTEGER {nrm2(1), nrm4(2), nrm8(3), nrm16(4), nrm32(5), nrm64(6), nrm128(7), nrm256(8)}read-onlycurrent
cwspAbrCallBwdTrm
OBJECT-TYPE
The Upper Bound on the time between forward RM-cells in the backward direction for the ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1.37INTEGER {trm0point78125(1), trm1point5625(2), trm3point125(3), trm6point25(4), trm12point5(5), trm25(6), trm50(7), trm100(8)}read-onlycurrent
cwspAbrCallBwdAdtf
OBJECT-TYPE
The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR call in the backward direction. This is the time permitted between sending RM-cells before the rate is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).
1.3.6.1.4.1.351.140.1.2.9.1.1.38Integer32 (1..1023)read-onlycurrent
cwspAbrCallBwdCdf
OBJECT-TYPE
The Cutoff Decrease Factor for the ABR call in the backward direction. This controls the decrease in Allowed Cell Rate (ACR) associated with missing RM-cell count (CRM). Larger values result in faster rate decrease. The default value is cdfOneOver16(4).
1.3.6.1.4.1.351.140.1.2.9.1.1.39INTEGER {cdf0(1), cdfOneOver64(2), cdfOneOver32(3), cdfOneOver16(4), cdfOneOver8(5), cdfOneOver4(6), cdfOneOver2(7), cdfOne(8)}read-onlycurrent
cwspAbrCallBwdFrameDiscard
OBJECT-TYPE
Whether Frame Discard is enabled or disabled in the backward direction for the ABR call.
1.3.6.1.4.1.351.140.1.2.9.1.1.40INTEGER {yes(1), no(2)}read-onlycurrent
cwspAbrCallFrtt
OBJECT-TYPE
The Fixed Round-Trip Time for the ABR call. This is the sum of the fixed and propagation delays from the source to the furthest destination and back.
1.3.6.1.4.1.351.140.1.2.9.1.1.41Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallMaxCtd
OBJECT-TYPE
The Maximum Cell Transfer Delay for the ABR call on this interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.42Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallMaxFwdCdv
OBJECT-TYPE
The Maximum Cell Delay Variation in the forward direction for the ABR call on this interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.43Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallMaxFwdClr
OBJECT-TYPE
The Maximum Cell Loss Ratio in the forward direction for the ABR call on this interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.44Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallMaxBwdCdv
OBJECT-TYPE
The Maximum Cell Delay Variation in the backward direction for the ABR call on this interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.45Integer32 (0..2147483647)read-onlycurrent
cwspAbrCallMaxBwdClr
OBJECT-TYPE
The Maximum Cell Loss Ratio in the backward direction for the ABR call on this interface.
1.3.6.1.4.1.351.140.1.2.9.1.1.46Integer32 (0..2147483647)read-onlycurrent
cwspPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.10
cwspPrefixTable
OBJECT-TYPE
A table specifying the network prefix(es) used for ILMI address registration.
1.3.6.1.4.1.351.140.1.2.10.1not-accessiblecurrent
cwspPrefixEntry
OBJECT-TYPE
Information about a single network prefix contained in the prefix table.
1.3.6.1.4.1.351.140.1.2.10.1.1not-accessiblecurrent
cwspNetPrefix
OBJECT-TYPE
The network prefix specified for use in ILMI address registration.
1.3.6.1.4.1.351.140.1.2.10.1.1.1NetPrefixnot-accessiblecurrent
cwspPrefixRowStatus
OBJECT-TYPE
Used to create, delete, activate and de-activate network prefixes used in ILMI address registration.
1.3.6.1.4.1.351.140.1.2.10.1.1.2RowStatusread-createcurrent
cwspAddress
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.11
cwspAddressTable
OBJECT-TYPE
The Interface ATM Address Table. This table contains all the attributes necessary to determine what the PNNI entity believes is reachable in terms of ATM End System Addresses and to determine which nodes are advertising this reachability. This table is also used to configure static routes to reachable addresses. Entries in this table can be created/deleted by setting the intfAddressRowStatus object to appropriate values. Existing entries in this table cannot be modified. Entries in this table can also be created/deleted through the command provided by the CLI.
1.3.6.1.4.1.351.140.1.2.11.1not-accessiblecurrent
cwspAddressEntry
OBJECT-TYPE
An entry in the table, containing information about a reachable address.
1.3.6.1.4.1.351.140.1.2.11.1.1not-accessiblecurrent
cwspAtmAddress
OBJECT-TYPE
The value of the ATM End System Address.
1.3.6.1.4.1.351.140.1.2.11.1.1.1AtmAddressnot-accessiblecurrent
cwspAddrLen
OBJECT-TYPE
The address length in bits to be applied to the ATM End System Address.
1.3.6.1.4.1.351.140.1.2.11.1.1.2INTEGER (0..160)not-accessiblecurrent
cwspAddrType
OBJECT-TYPE
The type of reachability from the advertising node to the address. This variable indicates either this ATM address ('internal') is a reachable ATM destination that is directly attached to the logical node advertising this address or an ATM address('exterior') that can be reached through a PNNI routing domain but which is not located in that routing domain.
1.3.6.1.4.1.351.140.1.2.11.1.1.3INTEGER {internal(1), exterior(2)}read-createcurrent
cwspAddrProto
OBJECT-TYPE
The routing mechanism via which the connectivity from the advertising node to the reachable address was learned. A 'local' address indicates this address is automatically advertised. A 'static' address is not automatically advertised. By setting 'cwspAddrRedistribute' variable (see below) to 'true' will force a 'static' address to be advertised.
1.3.6.1.4.1.351.140.1.2.11.1.1.4INTEGER {local(1), static(2)}read-createcurrent
cwspAddrPlan
OBJECT-TYPE
The address plan. For NSAP address, the first byte of the address automatically implies one of the three NSAP address plans: NSAP E.164, NSAP DCC or NSAP ICD.
1.3.6.1.4.1.351.140.1.2.11.1.1.5INTEGER {e164(1), nsap(2)}read-createcurrent
cwspAddrScope
OBJECT-TYPE
The PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the address.
1.3.6.1.4.1.351.140.1.2.11.1.1.6INTEGER (0..104)read-createcurrent
cwspAddrRedistribute
OBJECT-TYPE
Whether or not the reachable address specified by this entry is to be advertised by the local node into its PNNI routing domain. This object is only meaningful if the routing mechanism (cwspAddrProto) is static.
1.3.6.1.4.1.351.140.1.2.11.1.1.7TruthValueread-createcurrent
cwspAddressRowStatus
OBJECT-TYPE
To create or delete a reachable address. Note that NMS should use CreateAndGo to create a row and Destroy to delete a row. The managed device will return active or notInService as row status.
1.3.6.1.4.1.351.140.1.2.11.1.1.8RowStatusread-createcurrent
cwspRegAddress
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.12
cwspRegAddressTable
OBJECT-TYPE
This table contains a list of ATM addresses that can be used for calls to and from a given interface by a switch or service. The ATM addresses are registered by the endsystem via ILMI. ILMI registered addresses cannot be deleted using this table. This table only applies to switches and network services.
1.3.6.1.4.1.351.140.1.2.12.1not-accessiblecurrent
cwspRegAddressEntry
OBJECT-TYPE
An entry in the ATM Interface Registered Address table.
1.3.6.1.4.1.351.140.1.2.12.1.1not-accessiblecurrent
cwspRegAtmAddress
OBJECT-TYPE
An address registered for a given switch or service interface.
1.3.6.1.4.1.351.140.1.2.12.1.1.1AtmAddressread-onlycurrent
cwspRegAddressOrgSscope
OBJECT-TYPE
This object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indicated scope. The default values for organizational scope are localNetwork(1) for ATM group addresses, and global(15) for individual addresses.
1.3.6.1.4.1.351.140.1.2.12.1.1.2INTEGER {localNetwork(1), global(15)}read-writecurrent
cwspLoad
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.13
cwspLoadTable
OBJECT-TYPE
A table specifying the load information for each interface.
1.3.6.1.4.1.351.140.1.2.13.1not-accessiblecurrent
cwspLoadEntry
OBJECT-TYPE
An entry contains the load information.
1.3.6.1.4.1.351.140.1.2.13.1.1not-accessiblecurrent
cwspLoadBwTotal
OBJECT-TYPE
The total bandwidth of the interface.
1.3.6.1.4.1.351.140.1.2.13.1.1.1Integer32 (0..2147483647)read-onlycurrent
cwspLoadMaxBwCbr
OBJECT-TYPE
The Maximum bandwith for CBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.2Integer32 (0..2147483647)read-onlycurrent
cwspLoadMaxBwRtVbr
OBJECT-TYPE
The maximum bandwith for real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.3Integer32 (0..2147483647)read-onlycurrent
cwspLoadMaxBwNrtVbr
OBJECT-TYPE
The maximum bandwith for non-real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.4Integer32 (0..2147483647)read-onlycurrent
cwspLoadMaxBwAbr
OBJECT-TYPE
The maximum bandwith for ABR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.5Integer32 (0..2147483647)read-onlycurrent
cwspLoadMaxBwUbr
OBJECT-TYPE
The maximum bandwith for UBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.6Integer32 (0..2147483647)read-onlycurrent
cwspLoadBwAvail
OBJECT-TYPE
The total available bandwidth of the interface.
1.3.6.1.4.1.351.140.1.2.13.1.1.7Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlBwCbr
OBJECT-TYPE
The available bandwith for CBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.8Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlBwRtVbr
OBJECT-TYPE
The available bandwith for real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.9Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlBwNrtVbr
OBJECT-TYPE
The available bandwith for non-real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.10Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlBwAbr
OBJECT-TYPE
The available bandwith for ABR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.11Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlBwUbr
OBJECT-TYPE
The available bandwith for UBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.12Integer32 (0..2147483647)read-onlycurrent
cwspLoadVcAvail
OBJECT-TYPE
The total number of available VCs of the interface.
1.3.6.1.4.1.351.140.1.2.13.1.1.13Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlVcCbr
OBJECT-TYPE
The number of VCs used by CBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.14Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlVcRtVbr
OBJECT-TYPE
The number of VCs used by real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.15Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlVcNrtVbr
OBJECT-TYPE
The number of VCs used by non-real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.16Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlVcAbr
OBJECT-TYPE
The number of VCs used by ABR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.17Integer32 (0..2147483647)read-onlycurrent
cwspLoadAvlVcUbr
OBJECT-TYPE
The number of VCs used by UBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.18Integer32 (0..2147483647)read-onlycurrent
cwspLoadCtdCbr
OBJECT-TYPE
The cell transfer delay of CBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.19Integer32 (0..2147483647)read-onlycurrent
cwspLoadCtdRtVbr
OBJECT-TYPE
The cell transfer delay of real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.20Integer32 (0..2147483647)read-onlycurrent
cwspLoadCtdNrtVbr
OBJECT-TYPE
The cell transfer delay of non-real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.21Integer32 (0..2147483647)read-onlycurrent
cwspLoadCtdAbr
OBJECT-TYPE
The cell transfer delay of ABR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.22Integer32 (0..2147483647)read-onlycurrent
cwspLoadCtdUbr
OBJECT-TYPE
The cell transfer delay of UBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.23Integer32 (0..2147483647)read-onlycurrent
cwspLoadCdvCbr
OBJECT-TYPE
The cell delay variation of CBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.24Integer32 (0..2147483647)read-onlycurrent
cwspLoadCdvRtVbr
OBJECT-TYPE
The cell delay variation of real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.25Integer32 (0..2147483647)read-onlycurrent
cwspLoadCdvNrtVbr
OBJECT-TYPE
The cell delay variation of non-real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.26Integer32 (0..2147483647)read-onlycurrent
cwspLoadCdvAbr
OBJECT-TYPE
The cell delay variation of ABR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.27Integer32 (0..2147483647)read-onlycurrent
cwspLoadCdvUbr
OBJECT-TYPE
The cell delay variation of UBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.28Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr0Cbr
OBJECT-TYPE
The cell loss ratio-0 of CBR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.29Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr0RtVbr
OBJECT-TYPE
The cell loss ratio-0 of real time VBR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.30Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr0NrtVbr
OBJECT-TYPE
The cell loss ratio-0 of non-real time VBR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.31Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr0Abr
OBJECT-TYPE
The cell loss ratio-0 of ABR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.32Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr0Ubr
OBJECT-TYPE
The cell loss ratio-0 of UBR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.33Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr01Cbr
OBJECT-TYPE
The cell loss ratio-1 of CBR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.34Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr01RtVbr
OBJECT-TYPE
The cell loss ratio-1 of real time VBR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.35Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr01NrtVbr
OBJECT-TYPE
The cell loss ratio-1 of non-real time VBR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.36Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr01Abr
OBJECT-TYPE
The cell loss ratio-1 of ABR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.37Integer32 (0..2147483647)read-onlycurrent
cwspLoadClr01Ubr
OBJECT-TYPE
The cell loss ratio-1 of UBR service, -1 implies N/A.
1.3.6.1.4.1.351.140.1.2.13.1.1.38Integer32 (0..2147483647)read-onlycurrent
cwspLoadMinGurCrCbr
OBJECT-TYPE
The minimum guaranteed cell rate capacity of CBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.39Integer32 (0..2147483647)read-onlycurrent
cwspLoadMinGurCrRtVbr
OBJECT-TYPE
The minimum guaranteed cell rate capacity of real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.40Integer32 (0..2147483647)read-onlycurrent
cwspLoadMinGurCrNrtVbr
OBJECT-TYPE
The minimum guaranteed cell rate capacity of non-real time VBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.41Integer32 (0..2147483647)read-onlycurrent
cwspLoadMinGurCrAbr
OBJECT-TYPE
The minimum guaranteed cell rate capacity of ABR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.42Integer32 (0..2147483647)read-onlycurrent
cwspLoadMinGurCrUbr
OBJECT-TYPE
The minimum guaranteed cell rate capacity of UBR service.
1.3.6.1.4.1.351.140.1.2.13.1.1.43Integer32 (0..2147483647)read-onlycurrent
cwspConnTrace
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.14
cwspConnTraceAvail
OBJECT-TYPE
This object tells the number of calls can be traced concurrently. Depending on the system resource, this object may vary sometime to time. NMS should query this object to ensure there is system resource available before creating a row in the cwspConnTraceCntlTable.
1.3.6.1.4.1.351.140.1.2.14.1Integer32 (1..100)read-onlycurrent
cwspConnTraceNextIndex
OBJECT-TYPE
When creating a row in the cwspConnTraceCntlTable, NMS should query this object to obtain the index value to be used for row creation.
1.3.6.1.4.1.351.140.1.2.14.2Integer32 (1..2147483647)read-onlycurrent
cwspConnTraceCntlTable
OBJECT-TYPE
This Table contains the objects which control the creation of connection trace for the existing SVC call.
1.3.6.1.4.1.351.140.1.2.14.3not-accessiblecurrent
cwspConnTraceCntlEntry
OBJECT-TYPE
This object controls the connection trace creation. NMS needs to acquire the next index available to create a row. In addition, NMS needs to provide all read-create objects in the same pdu with RowStatus to be CreateAndGo.
1.3.6.1.4.1.351.140.1.2.14.3.1not-accessiblecurrent
cwspConnTraceIndex
OBJECT-TYPE
Index to a row of connection trace.
1.3.6.1.4.1.351.140.1.2.14.3.1.1Integer32 (1..2147483647)not-accessiblecurrent
cwspConnTraceifIndex
OBJECT-TYPE
The 'ifIndex' indicates the port to a trace connection.
1.3.6.1.4.1.351.140.1.2.14.3.1.2InterfaceIndexread-createcurrent
cwspConnTraceSrcVpi
OBJECT-TYPE
This object shows the VPI value of the starting point on this interface.
1.3.6.1.4.1.351.140.1.2.14.3.1.3Integer32 (0..4095)read-createcurrent
cwspConnTraceSrcVci
OBJECT-TYPE
This object shows The VCI value of the starting point on this interface. The value should be in the range of 32-65535 (0=SPVP).
1.3.6.1.4.1.351.140.1.2.14.3.1.4Integer32 (0..65535)read-createcurrent
cwspConnTraceType
OBJECT-TYPE
Setting this object to either p2p or p2mp to specify tracing a p2p or p2mp connection.
1.3.6.1.4.1.351.140.1.2.14.3.1.5INTEGER {p2p(1), p2mp(2)}read-createcurrent
cwspConnTraceCallRef
OBJECT-TYPE
This object shows the Call Reference value of the call on this interface.
1.3.6.1.4.1.351.140.1.2.14.3.1.6Integer32 (0..2147483647)read-onlycurrent
cwspConnTraceLeafRef
OBJECT-TYPE
This object shows the value of the Leaf Reference (EndPointReference) of the Call on this interface, this value is used to support p2mp call trace. For p2p call, this value should be set as 0 by NMS.
1.3.6.1.4.1.351.140.1.2.14.3.1.7Integer32 (0..65535)read-createcurrent
cwspConnTraceDestVpi
OBJECT-TYPE
This object shows the endpoint VPI value of the call on this interface.
1.3.6.1.4.1.351.140.1.2.14.3.1.8Integer32 (0..4095)read-onlycurrent
cwspConnTraceDestVci
OBJECT-TYPE
This object shows the endpoint VCI value of the call on this interface.
1.3.6.1.4.1.351.140.1.2.14.3.1.9Integer32 (0..65535)read-onlycurrent
cwspConnTraceDestCallRef
OBJECT-TYPE
This object shows the endpoint call reference on this interface.
1.3.6.1.4.1.351.140.1.2.14.3.1.10Integer32 (0..2147483647)read-onlycurrent
cwspConnTraceResultStatus
OBJECT-TYPE
This object shows the result of tracing the call. NMS should get positive result (i.e. traceCompleted) for this attribute before query the cwspConnTraceTable.
1.3.6.1.4.1.351.140.1.2.14.3.1.11INTEGER {traceInProgress(1), traceCompleted(2), traceIncompleted(3), traceExceededLength(4), traceContRefused(5), traceLackResource(6)}read-onlycurrent
cwspConnTraceQueryStatus
OBJECT-TYPE
This object used to manage rows in this table. However, only CreateAndGo, NotInService, Active, and Destroy are start up the trace. To remove a row, NMS set this value to Destroy. The managed device will either return Active or NotInService.
1.3.6.1.4.1.351.140.1.2.14.3.1.12RowStatusread-createcurrent
cwspConnTraceTable
OBJECT-TYPE
This table contains the objects which show the traversed node information in the existing SVC call.
1.3.6.1.4.1.351.140.1.2.14.4not-accessiblecurrent
cwspConnTraceEntry
OBJECT-TYPE
A conceptual row of the cwspConnTraceTable used to return information about all the nodes belongs to the connection which search criteria is corresponding to instance of the cwspConnTraceCntlTable.
1.3.6.1.4.1.351.140.1.2.14.4.1not-accessiblecurrent
cwspConnTraceDataIndex
OBJECT-TYPE
Along with cwspConnTraceIndex, this object specified an unique entry in the cwspConnTraceTable.
1.3.6.1.4.1.351.140.1.2.14.4.1.1Integer32 (1..100)not-accessiblecurrent
cwspConnTraceNodeId
OBJECT-TYPE
This octet string represents 22 bytes nodeId in the traced connection.
1.3.6.1.4.1.351.140.1.2.14.4.1.2PnniNodeIdread-onlycurrent
cwspConnTraceEgressPortId
OBJECT-TYPE
This object represents 4 bytes logical port ID of the traversed node. When 0 is specified, the destination node for the trace is reached.
1.3.6.1.4.1.351.140.1.2.14.4.1.3PnniPortIdread-onlycurrent
cwspConnTraceEgressVpi
OBJECT-TYPE
This object shows the Egress port's VPI value for the traced connection.
1.3.6.1.4.1.351.140.1.2.14.4.1.4Integer32 (0..4095)read-onlycurrent
cwspConnTraceEgressVci
OBJECT-TYPE
This object shows the Egress port's VCI value for the traced connection
1.3.6.1.4.1.351.140.1.2.14.4.1.5Integer32 (0..65535)read-onlycurrent
cwspConnTraceEgressCallRef
OBJECT-TYPE
This object shows the Egress port's call reference.
1.3.6.1.4.1.351.140.1.2.14.4.1.6Integer32 (0..2147483647)read-onlycurrent
cwspConnTraceEgressPhyPortId
OBJECT-TYPE
This object shows the Egress port's physical port Identifier for the traversed node; if this object is 0 meaning that the destination node for the traced connection has been reached. the meaning for the bytes are: first byte -- flag (used by CLI to decode the rest of bytes ) 2nd byte -- shelf 3rd & 4th bytes -- slot 5th byte -- subslot 6th & 7th bytes -- port 8th byte -- subport
1.3.6.1.4.1.351.140.1.2.14.4.1.7OCTET STRING (SIZE(8))read-onlycurrent
cwspConnTraceLastNode
OBJECT-TYPE
This value indicates if this entry contains the information about the last node where this trace ends. If it is the last node, this value is 'true(1)' or it is 'false(2)'.
1.3.6.1.4.1.351.140.1.2.14.4.1.8TruthValueread-onlycurrent
cwspOperation
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.2.15
cwspOperationTable
OBJECT-TYPE
The Interface operation table contains the runtime negotiated values between platform, PNNI controller and peer on an interface
1.3.6.1.4.1.351.140.1.2.15.1not-accessiblecurrent
cwspOperationEntry
OBJECT-TYPE
An entry in the interface operation table containing negotiated values of an interface
1.3.6.1.4.1.351.140.1.2.15.1.1not-accessiblecurrent
cwspOperIlmiEnable
OBJECT-TYPE
The operational state of ILMI.
1.3.6.1.4.1.351.140.1.2.15.1.1.1TruthValueread-onlycurrent
cwspOperIfcType
OBJECT-TYPE
The interface type of an interface publicUni -- Public User-Network Interface privateUni -- Private User-Network Interface iisp -- Interim Inter-Switch Signaling Protocol pnni -- Private Network-Network Interface aini -- ATM Inter-Network Interface enni -- Enhanced Network-Network Interface, a cisco proprietary interfac type.
1.3.6.1.4.1.351.140.1.2.15.1.1.2INTEGER {publicUni(1), privateUni(2), iisp(3), pnni(4), aini(5), enni(6)}read-onlycurrent
cwspOperIfcSide
OBJECT-TYPE
The IME type of the ATM device which is concluded from automatic interface type determination procedure.
1.3.6.1.4.1.351.140.1.2.15.1.1.3INTEGER {userSide(1), networkSide(2), symmetric(3)}read-onlycurrent
cwspOperMaxVPCs
OBJECT-TYPE
The maximum number of switched and permanent VPCs supported on this ATM interface
1.3.6.1.4.1.351.140.1.2.15.1.1.4Integer32 (0..4096)read-onlycurrent
cwspOperMaxVCCs
OBJECT-TYPE
The maximum number of switched and permanent VCCs supported on this ATM interface
1.3.6.1.4.1.351.140.1.2.15.1.1.5Integer32 (0..65536)read-onlycurrent
cwspOperMaxVpiBits
OBJECT-TYPE
The maximum number of active VPI bits on this ATM interface.
1.3.6.1.4.1.351.140.1.2.15.1.1.6Integer32 (0..12)read-onlycurrent
cwspOperMaxVciBits
OBJECT-TYPE
The maximum number of active VCI bits on this ATM interface.
1.3.6.1.4.1.351.140.1.2.15.1.1.7Integer32 (0..16)read-onlycurrent
cwspOperUniType
OBJECT-TYPE
The type of the ATM device, either public or private.
1.3.6.1.4.1.351.140.1.2.15.1.1.8INTEGER {public(1), private(2)}read-onlycurrent
cwspOperUniVersion
OBJECT-TYPE
An indication of the latest version of the ATM Forum UNI Signaling Specification that is supported on this ATM Interface. If this value is not present, a version of the UNI earlier than 3.1 is supported. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.
1.3.6.1.4.1.351.140.1.2.15.1.1.9INTEGER {version2point0(1), version3poing0(2), version3poing1(3), version4poing0(4), unsupported(5)}read-onlycurrent
cwspOperDeviceType
OBJECT-TYPE
This object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type can be determined. An ATM End System shall take the value of user(1), and an ATM network node shall take the value of node(2).
1.3.6.1.4.1.351.140.1.2.15.1.1.10INTEGER {user(1), node(2)}read-onlycurrent
cwspOperIlmiVersion
OBJECT-TYPE
An indication of the latest version of the ATM Forum ILMI Specification that is supported on this ATM Interface. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. If this object is not present, a version of the ILMI earlier than 4.0 is supported.
1.3.6.1.4.1.351.140.1.2.15.1.1.11INTEGER {unsupported(1), version4point0(2)}read-onlycurrent
cwspOperNniSigVersion
OBJECT-TYPE
An indication of the latest version of the ATM Forum PNNI Signaling Specification that is supported on this ATM Interface. Note that the PNNI routing version is not determined through ILMI. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. Note that 'enni' is not a signaling protocol.
1.3.6.1.4.1.351.140.1.2.15.1.1.12INTEGER {unsupported(1), iisp(2), pnniVersion1point0(3), enni(4), aini(5)}read-onlycurrent
cwspOperMaxSvpcVpi
OBJECT-TYPE
The maximum switched VPC VPI.
1.3.6.1.4.1.351.140.1.2.15.1.1.13Integer32 (1..4095)read-onlycurrent
cwspOperMinSvpcVpi
OBJECT-TYPE
The minimum switched VPC VPI.
1.3.6.1.4.1.351.140.1.2.15.1.1.14Integer32 (1..4095)read-onlycurrent
cwspOperMaxSvccVpi
OBJECT-TYPE
The maximum switched VCC VPI.
1.3.6.1.4.1.351.140.1.2.15.1.1.15Integer32 (0..4095)read-onlycurrent
cwspOperMinSvccVpi
OBJECT-TYPE
The minimum switched VCC VPI.
1.3.6.1.4.1.351.140.1.2.15.1.1.16Integer32 (0..4095)read-onlycurrent
cwspOperMaxSvccVci
OBJECT-TYPE
The maximum switched VCC VCI.
1.3.6.1.4.1.351.140.1.2.15.1.1.17Integer32 (35..65535)read-onlycurrent
cwspOperMinSvccVci
OBJECT-TYPE
The minimum switched VCC VCI.
1.3.6.1.4.1.351.140.1.2.15.1.1.18Integer32 (0..65535)read-onlycurrent
cwspOperAddrPlanSupported
OBJECT-TYPE
The ATM address plan supported on a public UNI. For all other interfaces, the value is aesa.
1.3.6.1.4.1.351.140.1.2.15.1.1.19INTEGER {both(1), aesa(2), e164(3)}read-onlycurrent
cwspOperFailReason
OBJECT-TYPE
Defined SVC port failures. Note: this object is used as trap varbind only. The NMS applications should not issue SNMP get, get-next for this object.
1.3.6.1.4.1.351.140.1.2.15.2INTEGER {ilmiDown(1), portDown(2), vsiOperDown(3), vccfailure(4), neighIpChanged(5), vsiRemove(6), vsiAdminDown(7)}read-onlycurrent
ciscoWANPnniRouting
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.3
ciscoWANPnniLinkStatus
OBJECT-TYPE
Indicates the status of a link has changed: 1 - the link entered the 2-Way Inside state, 2 - the link exit the 2-Way Inside state, 3 - the link entered the 2-Way Outside state, 4 - the link exit the 2-Way Outside state. 5 - the link entered the Common Outside state, or 6 - the link exit the Common Outside state and entered the 1-Way Outside state.
1.3.6.1.4.1.351.140.1.3.1INTEGER {in2win(1), out2win(2), in2wout(3), out2wout(4), inCout(5), outCout(6)}read-onlycurrent
ciscoWANPnniPglStatus
OBJECT-TYPE
Indicates the status of PGL process has changed: 1 - the PGL exit the hung-election state, or 2 - the PGL entered the hung-election state.
1.3.6.1.4.1.351.140.1.3.2INTEGER {ok(1), hung(2)}read-onlycurrent
ciscoWANPnniReachability
OBJECT-TYPE
This object is used in conjunction with ciscoWANPnniRemoteNodeId to indicate the reachability of the RemoteNode has changed: 1 - RemoteNode became reachable, or 2 - RemoteNode became unreachable.
1.3.6.1.4.1.351.140.1.3.3INTEGER {ok(1), fail(2)}read-onlycurrent
ciscoWANPnniRemoteNodeId
OBJECT-TYPE
Indicates the node identifier of a remote node. If the remote node ID is unknown, this attribute is set to all zeros.
1.3.6.1.4.1.351.140.1.3.4PnniNodeIdread-onlycurrent
ciscoWANPnniPortId
OBJECT-TYPE
The port identifier of the port.
1.3.6.1.4.1.351.140.1.3.5PnniPortIdread-onlycurrent
ciscoWANSpvc
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.1.4
ciscoWANSpvcFailReason
OBJECT-TYPE
Defines SPVC manager failures. Refer description in the textual convention. Note: this object is for Supporting Varbinds used only in trap definitions. The NMS applications should not depend on the implementation of this object. The SNMP Requests(GET,GET-NEXT) is not valid for this object.
1.3.6.1.4.1.351.140.1.4.1CwspSpvcStateread-onlycurrent
cwspSpvcNodePrefix
OBJECT-TYPE
Spvc node prefix for the pnni controller. This node prefix identifies an SPVC node in the network.
1.3.6.1.4.1.351.140.1.4.2OCTET STRING (SIZE(13))read-writecurrent
ciscoWANSvcMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.3
ciscoWANSvcMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.3.1
ciscoWANSvcMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.351.140.3.2

Conformance

NameOIDStatus
ciscoWANSvcMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities that support the Cisco SVC MIB.
1.3.6.1.4.1.351.140.3.1.1deprecated
ciscoWANSvcMIBCompliance2
MODULE-COMPLIANCE
The compliance statement for entities that support the Cisco SVC MIB.
1.3.6.1.4.1.351.140.3.1.2deprecated
ciscoWANSvcMIBCompliance3
MODULE-COMPLIANCE
The compliance statement for entities that support the Cisco SVC MIB.
1.3.6.1.4.1.351.140.3.1.3current
cwsInfoGrp
OBJECT-GROUP
A collection of objects providing device level information.
1.3.6.1.4.1.351.140.3.2.1current
cwspConfigGrp
OBJECT-GROUP
A collection of objects providing information about the controller interface operation and associated parameters.
1.3.6.1.4.1.351.140.3.2.2deprecated
cwspCacConfigGrp
OBJECT-GROUP
A collection of objects providing information about CAC information of a interface.
1.3.6.1.4.1.351.140.3.2.3current
cwspCallStatsGrp
OBJECT-GROUP
A collection of objects providing information about call statistics of a interface.
1.3.6.1.4.1.351.140.3.2.4current
cwspSigStatsGrp
OBJECT-GROUP
A collection of objects providing information about signaling statistics.
1.3.6.1.4.1.351.140.3.2.5current
cwspCallGrp
OBJECT-GROUP
A collection of objects providing information about the p2p or p2mp SVC/SPVC calls and associated parameters.
1.3.6.1.4.1.351.140.3.2.6current
cwspAbrCallGrp
OBJECT-GROUP
A collection of objects providing information about ABR calls and associated parameters of a interface.
1.3.6.1.4.1.351.140.3.2.7current
cwspPrefixGrp
OBJECT-GROUP
A table specifying the network prefix(es) used for ILMI address registration.
1.3.6.1.4.1.351.140.3.2.8current
cwspLoadGrp
OBJECT-GROUP
A collection of objects providing information about load information and associated parameters of a interface.
1.3.6.1.4.1.351.140.3.2.9current
cwspAddressGrp
OBJECT-GROUP
A collection of objects providing information about ATM End System Addresses.
1.3.6.1.4.1.351.140.3.2.10current
cwspSigConfigGrp
OBJECT-GROUP
A collection of objects providing information about signaling configuration and associated parameters.
1.3.6.1.4.1.351.140.3.2.11current
cwspSscopConfigGrp
OBJECT-GROUP
A collection of objects providing information about SSCOP configuration and associated parameters.
1.3.6.1.4.1.351.140.3.2.12current
cwspSscopStatsGrp
OBJECT-GROUP
A collection of objects providing information about SSCOP statistics.
1.3.6.1.4.1.351.140.3.2.13current
cwspRegAddressGrp
OBJECT-GROUP
A collection of objects providing information about registed ATM address.
1.3.6.1.4.1.351.140.3.2.14current
cwspRoutingGrp
OBJECT-GROUP
A collection of objects providing information about PNNI topology.
1.3.6.1.4.1.351.140.3.2.15current
cwspConnTraceGrp
OBJECT-GROUP
A collection of objects providing trace information about SVC/PNNI connnection.
1.3.6.1.4.1.351.140.3.2.16deprecated
cwspOperationGrp
OBJECT-GROUP
A collection of objects providing information about runtime negotiated values between platform, PNNI controller and peer on an interface.
1.3.6.1.4.1.351.140.3.2.17current
cwspSpvcGrp
OBJECT-GROUP
A collection of objects providing spvc related information in pnni controller.
1.3.6.1.4.1.351.140.3.2.18current
cwspConnTraceGrp2
OBJECT-GROUP
A collection of objects providing trace information about SVC/PNNI connnection.
1.3.6.1.4.1.351.140.3.2.19current
cwspConfigGrp2
OBJECT-GROUP
A collection of objects providing information about the controller interface operation and associated parameters.
1.3.6.1.4.1.351.140.3.2.20deprecated
cwspConfigGrp3
OBJECT-GROUP
A collection of objects providing information about the controller interface operation and associated parameters.
1.3.6.1.4.1.351.140.3.2.21current