MIBs Depot

CISCO-WAN-ATM-PREF-ROUTE-MIB

Registered at
1.3.6.1.4.1.9.9.99996
Last updated
2002-06-25 00:00
Organization
Cisco System Inc.
Revisions
2002-06-25 00:00
Namespace
cisco
Source file
CISCO-WAN-ATM-PREF-ROUTE-MIB
Digest
sha256:75ac7e1f691b0439b2b28e861153e858f848d2110d46bee96efeda8742487d6a

Description

This MIB facilitates the maintenance of preferred routes configuration.

Contact

Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
PNNI-MIBPnniNodeId, PnniPortId
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-TC-MIB
CISCO-SMI
CISCO-WAN-ATM-PREF-ROUTE-MIB
IANAifType-MIB
IF-MIB
PNNI-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
RouteId
TEXTUAL-CONVENTION
A value that uniquely identifies a preferred route for an SPVC connection.
current

Objects

NameOIDSyntaxAccessStatus
ciscoWanATMPrefRouteMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.99996.0
ciscoWanATMPrefRouteMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.99996.1
cwaPrefRouteConfTable
OBJECT-TYPE
This table contains a list of preferred routes configured at the master node.
1.3.6.1.4.1.9.9.99996.1.1not-accessiblecurrent
cwaPrefRouteConfEntry
OBJECT-TYPE
An entry in the preferred routes table. Each entry is keyed by a route identifier. The number of leading network elements to be used are specified by the object cwaPrefRouteNetwElemCount.
1.3.6.1.4.1.9.9.99996.1.1.1not-accessiblecurrent
cwaPrefRouteId
OBJECT-TYPE
A unique identifier to an entry of the preferred routes table. The identifier cannot be zero.
1.3.6.1.4.1.9.9.99996.1.1.1.1RouteIdnot-accessiblecurrent
cwaPrefRouteNwElemCount
OBJECT-TYPE
A value that indicates in the preferred route entry the number of leading network elements which are integral to the preferred route.
1.3.6.1.4.1.9.9.99996.1.1.1.2Unsigned32 (1..20)read-createcurrent
cwaPrefRouteRowStatus
OBJECT-TYPE
To create, modify and delete a preferred route entry. Only the value 'active', 'createAndGo', and 'destroy' are supported. The value of this variable is set to 'active' by the managed system for each valid entry. If a management station wants to delete an entry from the database, this value is set to 'destroy'. If a management station wants to create a new entry, this value is set to 'createAndGo'. The modification of an 'active' row is permitted.
1.3.6.1.4.1.9.9.99996.1.1.1.3RowStatusread-createcurrent
cwaPrefRouteNwElemTable
OBJECT-TYPE
The table contains a list of network elements, each of which is indexed by the route identifier and the position of the network element within the preferred route. Position 1 refers to the first network element, while position 20 refers to the last network element.
1.3.6.1.4.1.9.9.99996.1.2not-accessiblecurrent
cwaPrefRouteNwElemEntry
OBJECT-TYPE
An entry in the preferred route network element table. The entry can be modified on the fly. The entry will not be used in the preferred route if its position specified by cwaPrefRouteNwElemPos is greater than cwaPrefRouteNwElemCount.
1.3.6.1.4.1.9.9.99996.1.2.1not-accessiblecurrent
cwaPrefRouteNwElemPos
OBJECT-TYPE
The network element position identifies the position of the network element within the preferred route.
1.3.6.1.4.1.9.9.99996.1.2.1.1Unsigned32 (1..20)not-accessiblecurrent
cwaPrefRouteNwElemNodeId
OBJECT-TYPE
The 22-octet logical node identifier of a PNNI node.
1.3.6.1.4.1.9.9.99996.1.2.1.2PnniNodeIdread-createcurrent
cwaPrefRouteNwElemPortId
OBJECT-TYPE
The 32-bit logical port identifier of an egress port on the associated PNNI node for the network element.
1.3.6.1.4.1.9.9.99996.1.2.1.3PnniPortIdread-createcurrent
cwaPrefRouteNwElemRowStatus
OBJECT-TYPE
To create, modify and delete a network element (node identifier and port identifier). Only the value 'active', 'createAndGo', and 'destroy' are supported. The value of this variable is set to 'active' by the managed system for each valid entry. If a management station wants to delete an entry from the database, this value is set to 'destroy'. If a management station wants to create a new entry, this value is set to 'createAndGo'. The modification of an 'active' row is permitted.
1.3.6.1.4.1.9.9.99996.1.2.1.4RowStatusread-createcurrent
cwaPrefRouteConformance
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.99996.2
cwaPrefRouteCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.99996.2.1
cwaPrefMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.99996.2.2

Conformance

NameOIDStatus
cwaPrefMIBCompliance
MODULE-COMPLIANCE
The compliance statement for SNMPv2 entities which implement the preferred route.
1.3.6.1.4.1.9.9.99996.2.1.1current
cwaPrefRouteMIBGroups
OBJECT-GROUP
This group contains a list of objects which identify a preferred route.
1.3.6.1.4.1.9.9.99996.2.2.1current