MIBs Depot

ATM-FORUM-ILMI40-MIB

Registered at
1.3.6.1.4.1.353.1
1.3.6.1.4.1.353.2
Namespace
standard
Source file
ATM-FORUM-ILMI40-MIB
Digest
sha256:c328778b67940014597199e04985d2e06af9acfde283a123aff5332aa2bde3cb

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-FORUM-ILMI40-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.353.2.6atmfAddressGroup
1.3.6.1.4.1.353.2.7atmfNetPrefixGroup
1.3.6.1.4.1.353.2.11atmfAddressRegistrationAdminGroup

Textual conventions

NameOIDSyntaxAccessStatus
AtmAddress
type
AtmServiceCategory
type
ClnpAddress
type
TruthValue
type

Objects

NameOIDSyntaxAccessStatus
atmForum
OBJECT-IDENTITY
1.3.6.1.4.1.353
atmForumAdmin
OBJECT-IDENTITY
1.3.6.1.4.1.353.1
atmfTransmissionTypes
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2
atmfUnknownType
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.1
atmfSonetSTS3c
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.2
atmfDs3
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.3
atmf4B5B
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.4
atmf8B10B
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.5
atmfSonetSTS12c
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.6
atmfE3
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.7
atmfT1
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.8
atmfE1
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.2.9
atmfMediaTypes
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.3
atmfMediaUnknownType
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.3.1
atmfMediaCoaxCable
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.3.2
atmfMediaSingleMode
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.3.3
atmfMediaMultiMode
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.3.4
atmfMediaStp
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.3.5
atmfMediaUtp
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.3.6
atmfTrafficDescrTypes
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4
atmfNoDescriptor
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.1
atmfPeakRate
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.2
atmfNoClpNoScr
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.3
atmfClpNoTaggingNoScr
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.4
atmfClpTaggingNoScr
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.5
atmfNoClpScr
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.6
atmfClpNoTaggingScr
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.7
atmfClpTaggingScr
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.8
atmfClpNoTaggingMcr
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.4.9
atmfSrvcRegTypes
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.5
atmfSrvcRegLecs
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.5.1
atmfSrvcRegAns
OBJECT-IDENTITY
1.3.6.1.4.1.353.1.5.2
atmForumUni
OBJECT-IDENTITY
1.3.6.1.4.1.353.2
atmfPhysicalGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.1
atmfPortTable
OBJECT-TYPE
A table of physical layer status and parameter information for the ATM Interface's physical interface.
1.3.6.1.4.1.353.2.1.1not-accessiblemandatory
atmfPortEntry
OBJECT-TYPE
An entry in the table, containing information about the physical layer of an ATM Interface.
1.3.6.1.4.1.353.2.1.1.1not-accessiblemandatory
atmfPortIndex
OBJECT-TYPE
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
1.3.6.1.4.1.353.2.1.1.1.1INTEGER (0..2147483647)read-onlymandatory
atmfPortAddress
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. The Address Group, defined in theAddress Registration MIB should be used instead.
1.3.6.1.4.1.353.2.1.1.1.2AtmAddressread-onlyobsolete
atmfPortTransmissionType
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
1.3.6.1.4.1.353.2.1.1.1.3OBJECT IDENTIFIERread-onlydeprecated
atmfPortMediaType
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
1.3.6.1.4.1.353.2.1.1.1.4OBJECT IDENTIFIERread-onlydeprecated
atmfPortOperStatus
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
1.3.6.1.4.1.353.2.1.1.1.5INTEGER {other(1), inService(2), outOfService(3), loopBack(4)}read-onlydeprecated
atmfPortSpecific
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
1.3.6.1.4.1.353.2.1.1.1.6OBJECT IDENTIFIERread-onlydeprecated
atmfPortMyIfName
OBJECT-TYPE
A textual name of this interface. If this system is manageable through SNMP, and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string.
1.3.6.1.4.1.353.2.1.1.1.7DisplayStringread-onlymandatory
atmfPortMyIfIdentifier
OBJECT-TYPE
A unique value for each ATM interface. The scheme used to number the ATM interfaces on an ATM device is implementation specific. One way to generate this value is to use the ifIndex that an SNMP manager would use to identify the port. This interface must be uniquely numbered on this system to distinguish parallel links with a neighboring system.
1.3.6.1.4.1.353.2.1.1.1.8INTEGER (0..2147483647)read-onlymandatory
atmfMyIpNmAddress
OBJECT-TYPE
An IP Address to which a Network Management Station can send Network Management protocol messages, e.g. SNMP messages to UDP port 161, in order to access network management information concerning the operation of the ATM device local to this IME. If this object is supported, but the Network Management Agent has not been configured with an IP Address, the IME should return 0.0.0.0.
1.3.6.1.4.1.353.2.1.2IpAddressread-onlymandatory
atmfMyOsiNmNsapAddress
OBJECT-TYPE
An NSAP Address to which a Network Management Station can send Network Management protocol messages in order to access network management information concerning the operation of the ATM device local to this IME. If this object is supported, but the Network Management Agent has not been configured with an NSAP Address, the IME should return 0.0.0.0
1.3.6.1.4.1.353.2.1.3ClnpAddressread-onlymandatory
atmfMySystemIdentifier
OBJECT-TYPE
A 48 bit identifier, taken from the IEEE universally administered MAC address space, which uniquely identifies the ATM device local to this IME.
1.3.6.1.4.1.353.2.1.4OCTET STRING (SIZE(6))read-onlymandatory
atmfAtmLayerGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.2
atmfAtmLayerTable
OBJECT-TYPE
A table of ATM layer status and parameter information for the ATM Interface.
1.3.6.1.4.1.353.2.2.1not-accessiblemandatory
atmfAtmLayerEntry
OBJECT-TYPE
An entry in the table, containing information about the ATM layer of an ATM Interface.
1.3.6.1.4.1.353.2.2.1.1not-accessiblemandatory
atmfAtmLayerIndex
OBJECT-TYPE
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
1.3.6.1.4.1.353.2.2.1.1.1INTEGER (0..2147483647)read-onlymandatory
atmfAtmLayerMaxVPCs
OBJECT-TYPE
The maximum number of switched and permanent VPCs supported on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), the maximum number of VPCs PNNI may communicate over is set to zero.
1.3.6.1.4.1.353.2.2.1.1.2INTEGER (0..4096)read-onlymandatory
atmfAtmLayerMaxVCCs
OBJECT-TYPE
The maximum number of switched and permanent VCCs supported on this ATM Interface.
1.3.6.1.4.1.353.2.2.1.1.3INTEGER (0..268435456)read-onlymandatory
atmfAtmLayerConfiguredVPCs
OBJECT-TYPE
The number of permanent VPCs configured for use on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), the maximum number of VPCs is set to zero.
1.3.6.1.4.1.353.2.2.1.1.4INTEGER (0..4096)read-onlymandatory
atmfAtmLayerConfiguredVCCs
OBJECT-TYPE
The number of permanent VCCs configured for use on this ATM Interface.
1.3.6.1.4.1.353.2.2.1.1.5INTEGER (0..268435456)read-onlymandatory
atmfAtmLayerMaxVpiBits
OBJECT-TYPE
The maximum number of active VPI bits on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), this value has no meaning and is set to zero.
1.3.6.1.4.1.353.2.2.1.1.6INTEGER (0..12)read-onlymandatory
atmfAtmLayerMaxVciBits
OBJECT-TYPE
The maximum number of active VCI bits on this ATM Interface.
1.3.6.1.4.1.353.2.2.1.1.7INTEGER (0..16)read-onlymandatory
atmfAtmLayerUniType
OBJECT-TYPE
The type of the ATM device, either public or private.
1.3.6.1.4.1.353.2.2.1.1.8INTEGER {public(1), private(2)}read-onlymandatory
atmfAtmLayerUniVersion
OBJECT-TYPE
An indication of the latest version of the ATM Forum UNI Signalling Specification that is supported on this ATM Interface. If this value is not present, a version of the UNI earlier than 3.1 is supported. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.
1.3.6.1.4.1.353.2.2.1.1.9INTEGER {version2point0(1), version3point0(2), version3point1(3), version4point0(4), unsupported(5)}read-onlymandatory
atmfAtmLayerDeviceType
OBJECT-TYPE
This object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type can be determined. An ATM End System shall take the value of user(1), and an ATM network node shall take the value of node(2).
1.3.6.1.4.1.353.2.2.1.1.10INTEGER {user(1), node(2)}read-onlymandatory
atmfAtmLayerIlmiVersion
OBJECT-TYPE
An indication of the latest version of the ATM Forum ILMI Specification that is supported on this ATM Interface. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. If this object is not present, a version of the ILMI earlier than 4.0 is supported.
1.3.6.1.4.1.353.2.2.1.1.11INTEGER {unsupported(1), version4point0(2)}read-onlymandatory
atmfAtmLayerNniSigVersion
OBJECT-TYPE
An indication of the latest version of the ATM Forum PNNI Signalling Specification that is supported on this ATM Interface. Note that the PNNI routing version is not determined through ILMI. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.
1.3.6.1.4.1.353.2.2.1.1.12INTEGER {unsupported(1), iisp(2), pnniVersion1point0(3)}read-onlymandatory
atmfAtmLayerMaxSvpcVpi
OBJECT-TYPE
The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections.
1.3.6.1.4.1.353.2.2.1.1.13INTEGER (0..4096)read-onlymandatory
atmfAtmLayerMaxSvccVpi
OBJECT-TYPE
The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.
1.3.6.1.4.1.353.2.2.1.1.14INTEGER (0..4096)read-onlymandatory
atmfAtmLayerMinSvccVci
OBJECT-TYPE
This is the minimum VCI value that the signalling stack is configured to support for allocation to switched virtual channel connections. The same value applies to all SVCC VPI values for which the signalling stack is configured.
1.3.6.1.4.1.353.2.2.1.1.15INTEGER (0..65536)read-onlymandatory
atmfAtmStatsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.3
atmfAtmStatsTable
OBJECT-TYPE
This group is deprecated and should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.3.1not-accessibledeprecated
atmfAtmStatsEntry
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.3.1.1not-accessibledeprecated
atmfAtmStatsIndex
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.3.1.1.1INTEGER (0..2147483647)read-onlydeprecated
atmfAtmStatsReceivedCells
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.3.1.1.2Counterread-onlydeprecated
atmfAtmStatsDroppedReceivedCells
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.3.1.1.3Counterread-onlydeprecated
atmfAtmStatsTransmittedCells
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.3.1.1.4Counterread-onlydeprecated
atmfVpcGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.4
atmfVpcTable
OBJECT-TYPE
A table of status and parameter information on the virtual path connections which cross this ATM Interface. There is one entry in this table for each permanent virtual path connection.
1.3.6.1.4.1.353.2.4.1not-accessiblemandatory
atmfVpcEntry
OBJECT-TYPE
An entry in the table, containing information about a particular virtual path connection.
1.3.6.1.4.1.353.2.4.1.1not-accessiblemandatory
atmfVpcPortIndex
OBJECT-TYPE
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
1.3.6.1.4.1.353.2.4.1.1.1INTEGER (0..2147483647)read-onlymandatory
atmfVpcVpi
OBJECT-TYPE
The VPI value of this Virtual Path Connection at the local ATM Interface.
1.3.6.1.4.1.353.2.4.1.1.2INTEGER (0..4095)read-onlymandatory
atmfVpcOperStatus
OBJECT-TYPE
The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used.
1.3.6.1.4.1.353.2.4.1.1.3INTEGER {unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5)}read-onlymandatory
atmfVpcTransmitTrafficDescriptorType
OBJECT-TYPE
The type of traffic management, applicable to the transmit direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcTransmitTrafficDescriptorParam1, atmfVpcTransmitTrafficDescriptorParam2, atmfVpcTransmitTrafficDescriptorParam3, atmfVpcTransmitTrafficDescriptorParam4, and atmfVpcTransmitTrafficDescriptorParam5.
1.3.6.1.4.1.353.2.4.1.1.4OBJECT IDENTIFIERread-onlymandatory
atmfVpcTransmitTrafficDescriptorParam1
OBJECT-TYPE
The first parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.5INTEGER (0..2147483647)read-onlymandatory
atmfVpcTransmitTrafficDescriptorParam2
OBJECT-TYPE
The second parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.6INTEGER (0..2147483647)read-onlymandatory
atmfVpcTransmitTrafficDescriptorParam3
OBJECT-TYPE
The third parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.7INTEGER (0..2147483647)read-onlymandatory
atmfVpcTransmitTrafficDescriptorParam4
OBJECT-TYPE
The fourth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.8INTEGER (0..2147483647)read-onlymandatory
atmfVpcTransmitTrafficDescriptorParam5
OBJECT-TYPE
The fifth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.9INTEGER (0..2147483647)read-onlymandatory
atmfVpcReceiveTrafficDescriptorType
OBJECT-TYPE
The type of traffic management, applicable to the traffic in the receive direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcReceiveTrafficDescriptorParam1, atmfVpcReceiveTrafficDescriptorParam2, atmfVpcReceiveTrafficDescriptorParam3, atmfVpcReceiveTrafficDescriptorParam4, and atmfVpcReceiveTrafficDescriptorParam5.
1.3.6.1.4.1.353.2.4.1.1.10OBJECT IDENTIFIERread-onlymandatory
atmfVpcReceiveTrafficDescriptorParam1
OBJECT-TYPE
The first parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.11INTEGER (0..2147483647)read-onlymandatory
atmfVpcReceiveTrafficDescriptorParam2
OBJECT-TYPE
The second parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.12INTEGER (0..2147483647)read-onlymandatory
atmfVpcReceiveTrafficDescriptorParam3
OBJECT-TYPE
The third parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.13INTEGER (0..2147483647)read-onlymandatory
atmfVpcReceiveTrafficDescriptorParam4
OBJECT-TYPE
The fourth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.14INTEGER (0..2147483647)read-onlymandatory
atmfVpcReceiveTrafficDescriptorParam5
OBJECT-TYPE
The fifth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.15INTEGER (0..2147483647)read-onlymandatory
atmfVpcQoSCategory
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification.
1.3.6.1.4.1.353.2.4.1.1.16INTEGER {other(1), deterministic(2), statistical(3), unspecified(4)}read-onlyobsolete
atmfVpcTransmitQoSClass
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.4.1.1.17INTEGER (0..255)read-onlydeprecated
atmfVpcReceiveQoSClass
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.4.1.1.18INTEGER (0..255)read-onlydeprecated
atmfVpcBestEffortIndicator
OBJECT-TYPE
The object is examined when atmfVpcTransmitTrafficDescriptorType or atmfVpcReceiveTrafficDescriptorType for the associated connection is equal to atmfNoClpNoScr. If this object is set to false(2), the network is requested to apply the CBR.1 conformance definition. If this object is set to true(1), the network is requested to apply the UBR.1 conformance definition.
1.3.6.1.4.1.353.2.4.1.1.19TruthValueread-onlymandatory
atmfVpcServiceCategory
OBJECT-TYPE
The service category of this virtual path connection.
1.3.6.1.4.1.353.2.4.1.1.20AtmServiceCategoryread-onlymandatory
atmfVccGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.5
atmfVccTable
OBJECT-TYPE
A table of status and parameter information on the virtual channel connections which are visible at this ATM Interface. There is one entry in this table for each permanent virtual channel connection, including reserved VCCs that are supported; e.g., signalling, OAM flows, and ILMI, but not unassigned cells.
1.3.6.1.4.1.353.2.5.1not-accessiblemandatory
atmfVccEntry
OBJECT-TYPE
An entry in the table, containing information about a particular virtual channel connection.
1.3.6.1.4.1.353.2.5.1.1not-accessiblemandatory
atmfVccPortIndex
OBJECT-TYPE
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
1.3.6.1.4.1.353.2.5.1.1.1INTEGER (0..2147483647)read-onlymandatory
atmfVccVpi
OBJECT-TYPE
The VPI value of this Virtual Channel Connection at the local ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), this value has no meaning and is set to zero
1.3.6.1.4.1.353.2.5.1.1.2INTEGER (0..4095)read-onlymandatory
atmfVccVci
OBJECT-TYPE
The VCI value of this Virtual Channel Connection at the local ATM Interface.
1.3.6.1.4.1.353.2.5.1.1.3INTEGER (0..65535)read-onlymandatory
atmfVccOperStatus
OBJECT-TYPE
The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end to end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used.
1.3.6.1.4.1.353.2.5.1.1.4INTEGER {unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5)}read-onlymandatory
atmfVccTransmitTrafficDescriptorType
OBJECT-TYPE
The type of traffic management, applicable to the transmit direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccTransmitTrafficDescriptorParam1, atmfVccTransmitTrafficDescriptorParam2, atmfVccTransmitTrafficDescriptorParam3, atmfVccTransmitTrafficDescriptorParam4, and atmfVccTransmitTrafficDescriptorParam5.
1.3.6.1.4.1.353.2.5.1.1.5OBJECT IDENTIFIERread-onlymandatory
atmfVccTransmitTrafficDescriptorParam1
OBJECT-TYPE
The first parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.6INTEGER (0..2147483647)read-onlymandatory
atmfVccTransmitTrafficDescriptorParam2
OBJECT-TYPE
The second parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.7INTEGER (0..2147483647)read-onlymandatory
atmfVccTransmitTrafficDescriptorParam3
OBJECT-TYPE
The third parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.8INTEGER (0..2147483647)read-onlymandatory
atmfVccTransmitTrafficDescriptorParam4
OBJECT-TYPE
The fourth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.9INTEGER (0..2147483647)read-onlymandatory
atmfVccTransmitTrafficDescriptorParam5
OBJECT-TYPE
The fifth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.10INTEGER (0..2147483647)read-onlymandatory
atmfVccReceiveTrafficDescriptorType
OBJECT-TYPE
The type of traffic management, applicable to the traffic in the receive direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccReceiveTrafficDescriptorParam1, atmfVccReceiveTrafficDescriptorParam2, atmfVccReceiveTrafficDescriptorParam3, atmfVccReceiveTrafficDescriptorParam4, and atmfVccReceiveTrafficDescriptorParam5.
1.3.6.1.4.1.353.2.5.1.1.11OBJECT IDENTIFIERread-onlymandatory
atmfVccReceiveTrafficDescriptorParam1
OBJECT-TYPE
The first parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.12INTEGER (0..2147483647)read-onlymandatory
atmfVccReceiveTrafficDescriptorParam2
OBJECT-TYPE
The second parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.13INTEGER (0..2147483647)read-onlymandatory
atmfVccReceiveTrafficDescriptorParam3
OBJECT-TYPE
The third parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.14INTEGER (0..2147483647)read-onlymandatory
atmfVccReceiveTrafficDescriptorParam4
OBJECT-TYPE
The fourth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.15INTEGER (0..2147483647)read-onlymandatory
atmfVccReceiveTrafficDescriptorParam5
OBJECT-TYPE
The fifth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.16INTEGER (0..2147483647)read-onlymandatory
atmfVccQoSCategory
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification.
1.3.6.1.4.1.353.2.5.1.1.17INTEGER {other(1), deterministic(2), statistical(3), unspecified(4)}read-onlyobsolete
atmfVccTransmitQoSClass
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.5.1.1.18INTEGER (0..255)read-onlydeprecated
atmfVccReceiveQoSClass
OBJECT-TYPE
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
1.3.6.1.4.1.353.2.5.1.1.19INTEGER (0..255)read-onlydeprecated
atmfVccBestEffortIndicator
OBJECT-TYPE
The object is examined when atmfVccTransmitTrafficDescriptorType or atmfVccReceiveTrafficDescriptorType for the associated connection is equal to atmfNoClpNoScr. If this object is set to false(2), the network is requested to apply the CBR.1 conformance definition. If this object is set to true(1), the network is requested to apply the UBR.1 conformance definition.
1.3.6.1.4.1.353.2.5.1.1.20TruthValueread-onlymandatory
atmfVccTransmitFrameDiscard
OBJECT-TYPE
If set to true(1), this object indicates that the network is requested to treat data for this connection (in the transmit direction) as frames (e.g. AAL5 CPCS_PDU's) rather than as individual cells. While the precise implementation is network-specific, this treatment may for example involve discarding entire frames during congestion, rather than a few cells from many frames. The default value is false(2).
1.3.6.1.4.1.353.2.5.1.1.21TruthValueread-onlymandatory
atmfVccReceiveFrameDiscard
OBJECT-TYPE
If set to true(1), this object indicates that the network is requested to treat data for this connection (in the receive direction) as frames (e.g. AAL5 CPCS_PDU's) rather than as individual cells. While the precise implementation is network-specific, this treatment may for example involve discarding entire frames during congestion, rather than a few cells from many frames. The default value is false(2).
1.3.6.1.4.1.353.2.5.1.1.22TruthValueread-onlymandatory
atmfVccServiceCategory
OBJECT-TYPE
The service category of this virtual channel connection.
1.3.6.1.4.1.353.2.5.1.1.23AtmServiceCategoryread-onlymandatory
atmfAddressGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.6
atmfAddressTable
OBJECT-TYPE
A table implemented by the network-side IME, containing the ATM-layer addresses in effect on the user side of the UNI.
1.3.6.1.4.1.353.2.6.1not-accessiblemandatory
atmfAddressEntry
OBJECT-TYPE
Information about a single ATM-layer address in effect on the user-side IME. Note that the index variable atmAddressAtmAddress is a variable-length string, and as such the rule for variable-length strings in section 4.1.6 of RFC 1212 applies.
1.3.6.1.4.1.353.2.6.1.1not-accessiblemandatory
atmfAddressPort
OBJECT-TYPE
A unique value which identifies the UNI port for which the ATM address is in effect. The value of 0 has the special meaning of identifying the local UNI.
1.3.6.1.4.1.353.2.6.1.1.1INTEGER (0..2147483647)not-accessiblemandatory
atmfAddressAtmAddress
OBJECT-TYPE
The ATM address which is in effect on the user side of the ATM UNI port.
1.3.6.1.4.1.353.2.6.1.1.2AtmAddressnot-accessiblemandatory
atmfAddressStatus
OBJECT-TYPE
An indication of the validity of the ATM address at the user side of the UNI port. To configure a new address in this table, the user-side IME must set the appropriate instance of this object to the value valid(1). To delete an existing address in this table, the user-side IME must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the network-side IME which cause an address to become invalid, the network-side IME modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular address becomes invalid(2), the conceptual row for that address may be removed from the table at any time, either immediately or subsequently.
1.3.6.1.4.1.353.2.6.1.1.3INTEGER {valid(1), invalid(2)}read-writemandatory
atmfAddressOrgScope
OBJECT-TYPE
This object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indicated scope. If the user-side IME does not specify a value for the atmfAddressOrgScope object, the network shall set the value of this object to localNetwork(1), if the registered address is an ATM group address, or to global(15), if the registered address is an individual address. Refer to Annex 6.0 of ATM Forum UNI Signalling 4.0 for guidelines regarding the use of organizational scopes. This organization hierarchy may be mapped to ATM network's routing hierarchy such as PNNI's routing level and the mapping shall be configurable in nodes. Use of this object in a public network is for further study. The default values for organizational scope are localNetwork(1) for ATM group addresses, and global(15) for individual addresses.
1.3.6.1.4.1.353.2.6.1.1.4INTEGER {localNetwork(1), localNetworkPlusOne(2), localNetworkPlusTwo(3), siteMinusOne(4), intraSite(5), sitePlusOne(6), organizationMinusOne(7), intraOrganization(8), organizationPlusOne(9), communityMinusOne(10), intraCommunity(11), communityPlusOne(12), regional(13), interRegional(14), global(15)}read-writemandatory
atmfNetPrefixGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.7
atmfSrvcRegistryGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.8
atmfSrvcRegTable
OBJECT-TYPE
The table implemented by the IME on the network side of the ATM UNI port contains all of the services that are available to the user-side IME indexed by service identifier.
1.3.6.1.4.1.353.2.8.1not-accessiblemandatory
atmfSrvcRegEntry
OBJECT-TYPE
Information about a single service provider that is available to the user-side IME.
1.3.6.1.4.1.353.2.8.1.1not-accessiblemandatory
atmfSrvcRegPort
OBJECT-TYPE
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
1.3.6.1.4.1.353.2.8.1.1.1INTEGER (0..2147483647)not-accessiblemandatory
atmfSrvcRegServiceID
OBJECT-TYPE
This is the service identifier which uniquely identifies the type of service at the address provided in the table.
1.3.6.1.4.1.353.2.8.1.1.2OBJECT IDENTIFIERnot-accessiblemandatory
atmfSrvcRegATMAddress
OBJECT-TYPE
This is the full address of the service. The user-side IME may use this address to establish a connection with the service.
1.3.6.1.4.1.353.2.8.1.1.3AtmAddressread-onlymandatory
atmfSrvcRegAddressIndex
OBJECT-TYPE
An arbitrary integer to differentiate multiple rows containing different ATM addresses for the same service on the same port.
1.3.6.1.4.1.353.2.8.1.1.4INTEGER (1..2147483647)not-accessiblemandatory
atmfSrvcRegParm1
OBJECT-TYPE
An octet string whose size and meaning is determined by the value of atmfSrvcRegServiceID.
1.3.6.1.4.1.353.2.8.1.1.5OCTET STRING (SIZE(1..255))read-onlymandatory
atmfVpcAbrGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.9
atmfVpcAbrTable
OBJECT-TYPE
A table of operational parameters related to the ABR virtual path connections which cross this ATM Interface. There is one entry in this table for each ABR virtual path connection. Each virtual path connection represented in this table must also be represented by an entry in the atmfVpcTable.
1.3.6.1.4.1.353.2.9.1not-accessiblemandatory
atmfVpcAbrEntry
OBJECT-TYPE
An entry in the table, containing information about a particular ABR virtual path connection.
1.3.6.1.4.1.353.2.9.1.1not-accessiblemandatory
atmfVpcAbrPortIndex
OBJECT-TYPE
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
1.3.6.1.4.1.353.2.9.1.1.1INTEGER (0..2147483647)read-onlymandatory
atmfVpcAbrVpi
OBJECT-TYPE
The VPI value of this ABR Virtual Path Connection at the local ATM Interface.
1.3.6.1.4.1.353.2.9.1.1.2INTEGER (0..4095)read-onlymandatory
atmfVpcAbrTransmitIcr
OBJECT-TYPE
Initial Cell Rate: This is the rate at which the source starts, both initially and after an idle period. The unit is cells per second. The value must not be larger than PCR, and is usually lower.
1.3.6.1.4.1.353.2.9.1.1.3INTEGER (0..16777215)read-onlymandatory
atmfVpcAbrTransmitNrm
OBJECT-TYPE
The maximum number of data cells a source may send for each forward RM-cell. The default value is nrm32(5).
1.3.6.1.4.1.353.2.9.1.1.4INTEGER {nrm2(1), nrm4(2), nrm8(3), nrm16(4), nrm32(5), nrm64(6), nrm128(7), nrm256(8)}read-onlymandatory
atmfVpcAbrTransmitTrm
OBJECT-TYPE
Upper bound on the time between forward RM-cells for an active source (in milliseconds). The default value is trm100(8).
1.3.6.1.4.1.353.2.9.1.1.5INTEGER {trm0point78125(1), trm1point5625(2), trm3point125(3), trm6point25(4), trm12point5(5), trm25(6), trm50(7), trm100(8)}read-onlymandatory
atmfVpcAbrTransmitCdf
OBJECT-TYPE
Cutoff Decrease Factor: This field controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in faster rate decrease. The default value is cdfOneOver16(4).
1.3.6.1.4.1.353.2.9.1.1.6INTEGER {cdf0(1), cdfOneOver64(2), cdfOneOver32(3), cdfOneOver16(4), cdfOneOver8(5), cdfOneOver4(6), cdfOneOver2(7), cdfOne(8)}read-onlymandatory
atmfVpcAbrTransmitRif
OBJECT-TYPE
Rate Increment Factor: Controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase. The default value is rifOneOver16(12).
1.3.6.1.4.1.353.2.9.1.1.7INTEGER {rifOneOver32768(1), rifOneOver16384(2), rifOneOver8192(3), rifOneOver4096(4), rifOneOver2048(5), rifOneOver1024(6), rifOneOver512(7), rifOneOver256(8), rifOneOver128(9), rifOneOver64(10), rifOneOver32(11), rifOneOver16(12), rifOneOver8(13), rifOneOver4(14), rifOneOver2(15), rifOne(16)}read-onlymandatory
atmfVpcAbrTransmitRdf
OBJECT-TYPE
Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default value is rdfOneOver16(12).
1.3.6.1.4.1.353.2.9.1.1.8INTEGER {rdfOneOver32768(1), rdfOneOver16384(2), rdfOneOver8192(3), rdfOneOver4096(4), rdfOneOver2048(5), rdfOneOver1024(6), rdfOneOver512(7), rdfOneOver256(8), rdfOneOver128(9), rdfOneOver64(10), rdfOneOver32(11), rdfOneOver16(12), rdfOneOver8(13), rdfOneOver4(14), rdfOneOver2(15), rdfOne(16)}read-onlymandatory
atmfVpcAbrTransmitAdtf
OBJECT-TYPE
ACR Decrease Time Factor: Time permitted between sending RM-cells, before the allowed rate (ACR) is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 milliseconds. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).
1.3.6.1.4.1.353.2.9.1.1.9INTEGER (1..1023)read-onlymandatory
atmfVpcAbrTransmitCrm
OBJECT-TYPE
RM Cells Before Cutoff: Limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells.
1.3.6.1.4.1.353.2.9.1.1.10INTEGER (0..8388608)read-onlymandatory
atmfVccAbrGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.10
atmfVccAbrTable
OBJECT-TYPE
A table of operational parameters related to the ABR virtual channel connections which cross this ATM Interface. There is one entry in this table for each ABR virtual channel connection. Each virtual channel connection represented in this table must also be represented by an entry in the atmfVccTable.
1.3.6.1.4.1.353.2.10.1not-accessiblemandatory
atmfVccAbrEntry
OBJECT-TYPE
An entry in the table, containing information about a particular ABR virtual channel connection.
1.3.6.1.4.1.353.2.10.1.1not-accessiblemandatory
atmfVccAbrPortIndex
OBJECT-TYPE
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
1.3.6.1.4.1.353.2.10.1.1.1INTEGER (0..2147483647)read-onlymandatory
atmfVccAbrVpi
OBJECT-TYPE
The VPI value of this ABR Virtual Channel Connection at the local ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), this value has no meaning and is set to zero
1.3.6.1.4.1.353.2.10.1.1.2INTEGER (0..4095)read-onlymandatory
atmfVccAbrVci
OBJECT-TYPE
The VCI value of this ABR Virtual Channel Connection at the local ATM Interface.
1.3.6.1.4.1.353.2.10.1.1.3INTEGER (0..65535)read-onlymandatory
atmfVccAbrTransmitIcr
OBJECT-TYPE
Initial Cell Rate: This is the rate at which the source starts, both initially and after an idle period. The unit is cells per second. The value must not be larger than PCR, and is usually lower.
1.3.6.1.4.1.353.2.10.1.1.4INTEGER (0..16777215)read-onlymandatory
atmfVccAbrTransmitNrm
OBJECT-TYPE
The maximum number of data cells a source may send for each forward RM-cell. The default value is nrm32(5).
1.3.6.1.4.1.353.2.10.1.1.5INTEGER {nrm2(1), nrm4(2), nrm8(3), nrm16(4), nrm32(5), nrm64(6), nrm128(7), nrm256(8)}read-onlymandatory
atmfVccAbrTransmitTrm
OBJECT-TYPE
Upper bound on the time between forward RM-cells for an active source (in milliseconds). The default value is trm100(8).
1.3.6.1.4.1.353.2.10.1.1.6INTEGER {trm0point78125(1), trm1point5625(2), trm3point125(3), trm6point25(4), trm12point5(5), trm25(6), trm50(7), trm100(8)}read-onlymandatory
atmfVccAbrTransmitCdf
OBJECT-TYPE
Cutoff Decrease Factor: This field controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in faster rate decrease. The default value is cdfOneOver16(4).
1.3.6.1.4.1.353.2.10.1.1.7INTEGER {cdf0(1), cdfOneOver64(2), cdfOneOver32(3), cdfOneOver16(4), cdfOneOver8(5), cdfOneOver4(6), cdfOneOver2(7), cdfOne(8)}read-onlymandatory
atmfVccAbrTransmitRif
OBJECT-TYPE
Rate Increment Factor: Controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase. The default value is rifOneOver16(12).
1.3.6.1.4.1.353.2.10.1.1.8INTEGER {rifOneOver32768(1), rifOneOver16384(2), rifOneOver8192(3), rifOneOver4096(4), rifOneOver2048(5), rifOneOver1024(6), rifOneOver512(7), rifOneOver256(8), rifOneOver128(9), rifOneOver64(10), rifOneOver32(11), rifOneOver16(12), rifOneOver8(13), rifOneOver4(14), rifOneOver2(15), rifOne(16)}read-onlymandatory
atmfVccAbrTransmitRdf
OBJECT-TYPE
Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default value is rdfOneOver16(12).
1.3.6.1.4.1.353.2.10.1.1.9INTEGER {rdfOneOver32768(1), rdfOneOver16384(2), rdfOneOver8192(3), rdfOneOver4096(4), rdfOneOver2048(5), rdfOneOver1024(6), rdfOneOver512(7), rdfOneOver256(8), rdfOneOver128(9), rdfOneOver64(10), rdfOneOver32(11), rdfOneOver16(12), rdfOneOver8(13), rdfOneOver4(14), rdfOneOver2(15), rdfOne(16)}read-onlymandatory
atmfVccAbrTransmitAdtf
OBJECT-TYPE
ACR Decrease Time Factor: Time permitted between sending RM-cells, before the allowed rate (ACR) is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 milliseconds. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).
1.3.6.1.4.1.353.2.10.1.1.10INTEGER (1..1023)read-onlymandatory
atmfVccAbrTransmitCrm
OBJECT-TYPE
RM Cells Before Cutoff: Limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells.
1.3.6.1.4.1.353.2.10.1.1.11INTEGER (0..8388608)read-onlymandatory
atmfAddressRegistrationAdminGroup
OBJECT-IDENTITY
1.3.6.1.4.1.353.2.11
atmfAddressRegistrationAdminTable
OBJECT-TYPE
A table of Address Registration administrative information for the ATM Interface.
1.3.6.1.4.1.353.2.11.1not-accessiblemandatory
atmfAddressRegistrationAdminEntry
OBJECT-TYPE
An entry in the table, containing Address Registration administrative information for the ATM Interface.
1.3.6.1.4.1.353.2.11.1.1not-accessiblemandatory
atmfAddressRegistrationAdminIndex
OBJECT-TYPE
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
1.3.6.1.4.1.353.2.11.1.1.1INTEGER (0..2147483647)read-onlymandatory
atmfAddressRegistrationAdminStatus
OBJECT-TYPE
An indication of whether or not Address Registration is supported on this ATM Interface. Supported(1) indicates that this ATM Interface supports address registration. Unsupported(2) indicates that this ATM Interface does not support address registration.
1.3.6.1.4.1.353.2.11.1.1.2INTEGER {supported(1), unsupported(2)}read-onlymandatory

Notifications

NameOIDStatus
atmfVpcChange
NOTIFICATION-TYPE
An atmfVpcChange trap indicates that a permanent VPC has been added or deleted at this ATM Interface or that the attributes of an existing VPC have been modified. The variables included in the trap identify the VPI value of the reconfigured VPC at this ATM Interface.
1.3.6.1.4.1.353.0.1
atmfVccChange
NOTIFICATION-TYPE
An atmfVccChange trap indicates that a permanent VCC has been added or deleted at this ATM Interface or that the attributes of an existing VCC have been modified.. The variables included in the trap identify the VCI and VPI values of the reconfigured VCC at this ATM Interface.
1.3.6.1.4.1.353.0.2