ATM-DXI-MIB
- Registered at
- 1.3.6.1.4.1.353.3
- Namespace
- standard
- Source file
ATM-DXI-MIB- Digest
sha256:3c2a924ed5476028e13a7c369dfd14dd58ea2fb55bc8218fe23bb7cc4cabace0
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-DXI-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Dfa type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| atmForum OBJECT-IDENTITY | 1.3.6.1.4.1.353 | |||
| atmUniDxi OBJECT-IDENTITY | 1.3.6.1.4.1.353.3 | |||
| atmDxi OBJECT-IDENTITY | 1.3.6.1.4.1.353.3.2 | |||
| atmDxiConfTable OBJECT-TYPE This table contains ATM DXI configuration information including information on the mode supported across the DXI. | 1.3.6.1.4.1.353.3.2.2 | not-accessible | mandatory | |
| atmDxiConfEntry OBJECT-TYPE This list contains ATM DXI configuration information. | 1.3.6.1.4.1.353.3.2.2.1 | not-accessible | mandatory | |
| atmDxiConfIfIndex OBJECT-TYPE The value of this object identifies, for SNMP, the ATM DXI interface for which this entry contains management information. This is the same value as used to identify the IfEntry describing the DCE interface. Management uses and expects this value. In the proxy mode of operation, the DCE always treats this as 0, but preserves it in its response to the DTE. 0, the DXI value, means the interface over which the DXI LMI request was received. | 1.3.6.1.4.1.353.3.2.2.1.2 | INTEGER | read-only | mandatory |
| atmDxiConfMode OBJECT-TYPE This object identifies the dxi mode being used at the atm dxi port. | 1.3.6.1.4.1.353.3.2.2.1.3 | INTEGER {mode1a(1), mode1b(2), mode2(3)} | read-write | mandatory |
| atmDxiDFAConfTable OBJECT-TYPE This table contains configuration information about a particular DFA. | 1.3.6.1.4.1.353.3.2.3 | not-accessible | mandatory | |
| atmDxiDFAConfEntry OBJECT-TYPE This list contains ATM DXI DFA configuration information. | 1.3.6.1.4.1.353.3.2.3.1 | not-accessible | mandatory | |
| atmDxiDFAConfIfIndex OBJECT-TYPE The value of this object identifies, for SNMP, the ATM DXI interface for which this entry contains management information. This is the same value as used to identify the IfEntry describing the DCE interface. Management uses and expects this value. In the proxy mode of operation, the DCE always treats this as 0, but preserves it in its response to the DTE. 0, the DXI value, means the interface over which the DXI LMI request was received. | 1.3.6.1.4.1.353.3.2.3.1.1 | INTEGER | read-only | mandatory |
| atmDxiDFAConfDfaIndex OBJECT-TYPE This object identifies the DFA instance on the DXI identified by atmDxiDFAConfIfIndex. | 1.3.6.1.4.1.353.3.2.3.1.2 | Dfa | read-only | mandatory |
| atmDxiDFAConfAALType OBJECT-TYPE This object identifies the AAL type supported at this DFA. Note, if mode 2 is supported on the DXI identified by the corresponding instance of atmDxiDFAConfIfIndex and that instance of atmDxiDFAConfIfIndex identifies the DCE side of the DXI, then this object contains the AAL Type being run on the corresponding VPI/VCI on the corresponding ATM UNI interface. | 1.3.6.1.4.1.353.3.2.3.1.3 | INTEGER {unknown(1), none(2), aal34(3), aal5(4)} | read-write | mandatory |
| atmDxiEnterprise OBJECT-TYPE This object is included as the first ID-Value pair in a Trap PDU for which the Generic Trap Type field has the value 'enterpriseSpecific'. The value of the object identifies the enterprise under whose authority the value of the Enterprise Trap Type field is defined. | 1.3.6.1.4.1.353.3.2.4 | OBJECT IDENTIFIER | not-accessible | mandatory |