HPHOTSWAP2SUBSYSTEM-MIB
- Registered at
- 1.3.6.1.4.1.11.2.23
- Namespace
- hp
- Source file
HPHOTSWAP2SUBSYSTEM-MIB- Digest
sha256:795951377c480bc3c0a12c7297a547ff8b74452785f2f786d74da134ec5956fb
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPHOTSWAP2SUBSYSTEM-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.23.6 | hpnsaECC | HPNSAECC-MIB |
| 1.3.6.1.4.1.11.2.23.7 | hpnsaSystemInfo | HPNSASINFO-MIB |
| 1.3.6.1.4.1.11.2.23.8 | hpnsaRemoteAssist | HPNSAREMOTEASSIST-MIB |
| 1.3.6.1.4.1.11.2.23.9 | hpnsaEISA | HPNSAEISA-MIB |
| 1.3.6.1.4.1.11.2.23.10 | hpnsaPci | HPNSAPCI-MIB |
| 1.3.6.1.4.1.11.2.23.13 | hpnsaTrapCfg | HPNSATRAPCFG-MIB |
| 1.3.6.1.4.1.11.2.23.14 | hpnsaScsi | HPNSASCSI-MIB |
| 1.3.6.1.4.1.11.2.23.15 | hpnsaStorageCap | HPNSASTORAGECAP-MIB |
| 1.3.6.1.4.1.11.2.23.19 | hpnsaEventLog | HPNSAEVENT-MIB |
| 1.3.6.1.4.1.11.2.23.20 | hpnsaHotSwap | HPNSAHOTSWAPSUBSYSTEM-MIB |
| 1.3.6.1.4.1.11.2.23.22 | hpnsaRPS | HPNSARPS-MIB |
| 1.3.6.1.4.1.11.2.23.24 | hpnsaSW | HPNSASOFTWARESUBSYSTEM-MIB |
| 1.3.6.1.4.1.11.2.23.25 | hpnsaASR | HPNSAASR-MIB |
| 1.3.6.1.4.1.11.2.23.26 | hpnsaEnvironment | HPNSAENV-MIB |
| 1.3.6.1.4.1.11.2.23.35 | hpIpfE0Events | HPIPF02TRAP-MIB |
| 1.3.6.1.4.1.11.2.23.45 | hpIpf02Events | HPIPF02TRAP-MIB |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hp OBJECT-IDENTITY | 1.3.6.1.4.1.11 | |||
| nm OBJECT-IDENTITY | 1.3.6.1.4.1.11.2 | |||
| hpnsa OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23 | |||
| hpnsaHotswap2 OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.27 | |||
| hpnsaHS2MibRev OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.27.1 | |||
| hpnsaHS2MibRevMajor OBJECT-TYPE The major revision level of the MIB. | 1.3.6.1.4.1.11.2.23.27.1.1 | INTEGER | read-only | mandatory |
| hpnsaHS2MibRevMinor OBJECT-TYPE The minor revision level of the MIB. | 1.3.6.1.4.1.11.2.23.27.1.2 | INTEGER | read-only | mandatory |
| hpnsaHS2Cage OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.27.2 | |||
| hpnsaHS2CageTable OBJECT-TYPE A table of Hotswap 2 Subsystem cage information entries. | 1.3.6.1.4.1.11.2.23.27.2.1 | not-accessible | mandatory | |
| hpnsaHS2CageEntry OBJECT-TYPE Hotswap 2 Subsystem cage information. | 1.3.6.1.4.1.11.2.23.27.2.1.1 | not-accessible | mandatory | |
| hpnsaHS2CageIndex OBJECT-TYPE A unique index for the Hotswap 2 Cage. | 1.3.6.1.4.1.11.2.23.27.2.1.1.1 | INTEGER | read-only | mandatory |
| hpnsaHS2Cage12VPower OBJECT-TYPE The current state of the 12V DC power. | 1.3.6.1.4.1.11.2.23.27.2.1.1.2 | INTEGER {absent(1), present(2)} | read-only | mandatory |
| hpnsaHS2CageTerminator1 OBJECT-TYPE The current state of Terminator 1. | 1.3.6.1.4.1.11.2.23.27.2.1.1.3 | INTEGER {not-attached(1), attached(2)} | read-only | mandatory |
| hpnsaHS2CageTerminator2 OBJECT-TYPE The current state of Terminator 2. | 1.3.6.1.4.1.11.2.23.27.2.1.1.4 | INTEGER {not-attached(1), attached(2)} | read-only | mandatory |
| hpnsaHS2CageSCSICable1 OBJECT-TYPE The current state of SCSI Cable 1. | 1.3.6.1.4.1.11.2.23.27.2.1.1.5 | INTEGER {not-attached(1), attached(2)} | read-only | mandatory |
| hpnsaHS2CageSCSICable2 OBJECT-TYPE The current state of SCSI Cable 2. | 1.3.6.1.4.1.11.2.23.27.2.1.1.6 | INTEGER {not-attached(1), attached(2)} | read-only | mandatory |
| hpnsaHS2CageBaseSCSIAddress OBJECT-TYPE The base SCSI address of this cage. | 1.3.6.1.4.1.11.2.23.27.2.1.1.7 | INTEGER | read-write | mandatory |
| hpnsaHS2CageTemperature OBJECT-TYPE The current temperature reading for the temperature sensor (in celcius). | 1.3.6.1.4.1.11.2.23.27.2.1.1.8 | INTEGER | read-only | mandatory |
| hpnsaHS2CageTemperatureWarningThreshold OBJECT-TYPE The warning threshold for the temperature sensor (in celsius). | 1.3.6.1.4.1.11.2.23.27.2.1.1.9 | INTEGER | read-write | mandatory |
| hpnsaHS2CageTemperatureAlertThreshold OBJECT-TYPE The alert threshold for the temperature sensor (in celsius). | 1.3.6.1.4.1.11.2.23.27.2.1.1.10 | INTEGER | read-write | mandatory |
| hpnsaHS2CageManagementBoardFRU OBJECT-TYPE The Field Replaceable Unit (FRU) Management Board information. | 1.3.6.1.4.1.11.2.23.27.2.1.1.11 | OCTET STRING (SIZE(0..255)) | read-only | mandatory |
| hpnsaHS2CageInterconnectFRU OBJECT-TYPE The Field Replaceable Unit (FRU) Interconnect Board information. | 1.3.6.1.4.1.11.2.23.27.2.1.1.12 | OCTET STRING (SIZE(0..255)) | read-only | mandatory |
| hpnsaHS2CageFirmwareMajorRev OBJECT-TYPE The major firmware revision of the Management Board. | 1.3.6.1.4.1.11.2.23.27.2.1.1.13 | INTEGER | read-only | mandatory |
| hpnsaHS2CageFirmwareMinorRev OBJECT-TYPE The minor firmware revision of the Management Board. | 1.3.6.1.4.1.11.2.23.27.2.1.1.14 | INTEGER | read-only | mandatory |
| hpnsaHS2Slot OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.27.3 | |||
| hpnsaHS2SlotTable OBJECT-TYPE A table of Hotswap 2 Subsystem Slot information entries. | 1.3.6.1.4.1.11.2.23.27.3.1 | not-accessible | mandatory | |
| hpnsaHS2SlotEntry OBJECT-TYPE Hotswap 2 Subsystem Slot information. | 1.3.6.1.4.1.11.2.23.27.3.1.1 | not-accessible | mandatory | |
| hpnsaHS2SlotCageIndex OBJECT-TYPE A unique index for the Hotswap 2 cage. | 1.3.6.1.4.1.11.2.23.27.3.1.1.1 | INTEGER | read-only | mandatory |
| hpnsaHS2SlotIndex OBJECT-TYPE Physical slot number in the Hotswap 2 cage. | 1.3.6.1.4.1.11.2.23.27.3.1.1.2 | INTEGER | read-only | mandatory |
| hpnsaHS2DrivePresent OBJECT-TYPE Defines whether there is a drive present in this slot. | 1.3.6.1.4.1.11.2.23.27.3.1.1.3 | INTEGER {not-present(1), present(2)} | read-only | mandatory |
| hpnsaHS2DriveSCSIBusType OBJECT-TYPE The SCSI Bus type with which this drive is attached. | 1.3.6.1.4.1.11.2.23.27.3.1.1.4 | INTEGER {se(1), lvd(2), hvd(3), none(4)} | read-only | mandatory |
| hpnsaHS2DriveIdentify OBJECT-TYPE Select or unselect a drive to provide a visual indicator signal for user to locate drive. | 1.3.6.1.4.1.11.2.23.27.3.1.1.5 | INTEGER | read-write | mandatory |