HPNSAHOTSWAPSUBSYSTEM-MIB
- Registered at
- 1.3.6.1.4.1.11.2.23.20
- Namespace
- hp
- Source file
HPNSAHOTSWAPSUBSYSTEM-MIB- Digest
sha256:c4a69dc8f60a87375395dd58b50ad32abdd500b0eb2e1e936529fb891469e58f
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPNSAHOTSWAPSUBSYSTEM-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hp OBJECT-IDENTITY | 1.3.6.1.4.1.11 | |||
| nm OBJECT-IDENTITY | 1.3.6.1.4.1.11.2 | |||
| hpnsa OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23 | |||
| hpnsaHotSwap OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.20 | |||
| hpnsaHSMibRev OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.20.1 | |||
| hpnsaHSMibRevMajor OBJECT-TYPE The major revision level of the MIB. | 1.3.6.1.4.1.11.2.23.20.1.1 | INTEGER (1..65535) | read-only | mandatory |
| hpnsaHSMibRevMinor OBJECT-TYPE The minor revision level of the MIB. | 1.3.6.1.4.1.11.2.23.20.1.2 | INTEGER (0..65535) | read-only | mandatory |
| hpnsaHSAgent OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.20.2 | |||
| hpnsaHSAgentTable OBJECT-TYPE A table of SNMP Agents that satisfy requests for this MIB. | 1.3.6.1.4.1.11.2.23.20.2.1 | not-accessible | mandatory | |
| hpnsaHSAgentEntry OBJECT-TYPE A description of the agents that access Hot Swap Subsystem | 1.3.6.1.4.1.11.2.23.20.2.1.1 | not-accessible | mandatory | |
| hpnsaHSAgentIndex OBJECT-TYPE A unique index for this module description. | 1.3.6.1.4.1.11.2.23.20.2.1.1.1 | INTEGER (0..255) | read-only | mandatory |
| hpnsaHSAgentName OBJECT-TYPE Name of the Agent/Agents satisfying SNMP requests for this MIB. | 1.3.6.1.4.1.11.2.23.20.2.1.1.2 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| hpnsaHSAgentVersion OBJECT-TYPE Version number of the Agent/Agents satisfying SNMP requests for this MIB. | 1.3.6.1.4.1.11.2.23.20.2.1.1.3 | DisplayString (SIZE(0..5)) | read-only | mandatory |
| hpnsaHSAgentDate OBJECT-TYPE The date on which this Agent was created. field octets contents range _________________________________________________ 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59 | 1.3.6.1.4.1.11.2.23.20.2.1.1.4 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| hpnsaHSModule OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.20.3 | |||
| hpnsaHSModuleTable OBJECT-TYPE A table of Hot Swap Subsystem module information entries. | 1.3.6.1.4.1.11.2.23.20.3.1 | not-accessible | mandatory | |
| hpnsaHSModuleEntry OBJECT-TYPE Hot Swap Subsystem module information. | 1.3.6.1.4.1.11.2.23.20.3.1.1 | not-accessible | mandatory | |
| hpnsaHSModuleIndex OBJECT-TYPE A unique index for the Hot Swap module. | 1.3.6.1.4.1.11.2.23.20.3.1.1.1 | INTEGER | read-only | mandatory |
| hpnsaHSModuleScsiCableType OBJECT-TYPE The SCSI cable type attached to the backplane on the right side a Hot Swap Subsystem cage. | 1.3.6.1.4.1.11.2.23.20.3.1.1.2 | INTEGER {wide(1), narrow(2), error(3), no-cable(4)} | read-only | mandatory |
| hpnsaHSModuleTempStatus OBJECT-TYPE Status of the Hot Swap Subsystem's temperature sensor. | 1.3.6.1.4.1.11.2.23.20.3.1.1.3 | INTEGER {error(1), normal(2), warning(3), emergency(4)} | read-only | mandatory |
| hpnsaHSModuleSwitchState OBJECT-TYPE Status of the DIP switches on the Hot Swap Subsystem. | 1.3.6.1.4.1.11.2.23.20.3.1.1.4 | INTEGER {disabled(1), enabled(2)} | read-only | mandatory |
| hpnsaHSModuleDeviceStartup OBJECT-TYPE State of the Disk Spin Up DIP switch on the Hot Swap Subsystem. 1 = disks spin up with the system after a period of time 2 = disks spin up after receiving SCSI Start Command | 1.3.6.1.4.1.11.2.23.20.3.1.1.5 | INTEGER {at-poweron(1), by-start-command(2)} | read-only | mandatory |
| hpnsaHSModuleMiddleDrvAddr OBJECT-TYPE State of the Middle Drive Address DIP switch on the Hot Swap Subsystem. 1 = lowest value, either 0 or 8 depending on High Eight Address 2 = default, either 2 or 10 depending on High Eight Address | 1.3.6.1.4.1.11.2.23.20.3.1.1.6 | INTEGER {lowest(1), default(2)} | read-only | mandatory |
| hpnsaHSModuleHi8ScsiAddr OBJECT-TYPE State of the High Eight SCSI Address DIP switch on the Hot Swap Subsystem. 1 = SCSI address range from 1 to 7 2 = SCSI address range from 9 to 15 | 1.3.6.1.4.1.11.2.23.20.3.1.1.7 | INTEGER {hi-range-9to15(1), lo-range-1to7(2)} | read-only | mandatory |
| hpnsaHSDev OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.23.20.4 | |||
| hpnsaHSDevTable OBJECT-TYPE A table of Hot Swap Subsystem device information entries. | 1.3.6.1.4.1.11.2.23.20.4.1 | not-accessible | mandatory | |
| hpnsaHSDevEntry OBJECT-TYPE Hot Swap Subsystem device information. | 1.3.6.1.4.1.11.2.23.20.4.1.1 | not-accessible | mandatory | |
| hpnsaHSDevModuleIndex OBJECT-TYPE A unique index for the Hot Swap module. | 1.3.6.1.4.1.11.2.23.20.4.1.1.1 | INTEGER (0..255) | read-only | mandatory |
| hpnsaHSDevIndex OBJECT-TYPE Physical device number in the Hot Swap Module. | 1.3.6.1.4.1.11.2.23.20.4.1.1.2 | INTEGER | read-only | mandatory |
| hpnsaHSDevExistence OBJECT-TYPE Defines whether a device exists in the physical slot of the Hot Swap Subsystem. | 1.3.6.1.4.1.11.2.23.20.4.1.1.3 | INTEGER {present(1), not-present(2)} | read-only | mandatory |
| hpnsaHSDevScsiAddr OBJECT-TYPE SCSI address of the device in the physical slot of the Hot Swap Subsystem. | 1.3.6.1.4.1.11.2.23.20.4.1.1.4 | INTEGER | read-only | mandatory |
| hpnsaHSDevPowerStatus OBJECT-TYPE Defines whether the power connector of a particular device in the Hot Swap Subsystem is connected. | 1.3.6.1.4.1.11.2.23.20.4.1.1.5 | INTEGER {not-connected(1), connected(2)} | read-only | mandatory |
| hpnsaHSPwrAlertDelay OBJECT-TYPE Set this variable to non-zero integer value to skip checking the power connection state of Starfish device. | 1.3.6.1.4.1.11.2.23.20.4.2 | INTEGER (0..65535) | read-write | mandatory |