MIBs Depot

HPNSAASR-MIB

Registered at
1.3.6.1.4.1.11.2.23.25
Namespace
hp
Source file
HPNSAASR-MIB
Digest
sha256:67683537ef2ff62a99f61ef5b31603c8e9c293eadcefe6b045778406dda11024

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPNSAASR-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hp
OBJECT-IDENTITY
1.3.6.1.4.1.11
nm
OBJECT-IDENTITY
1.3.6.1.4.1.11.2
hpnsa
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.23
hpnsaASR
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.23.25
hpnsaASRMibRev
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.23.25.1
hpnsaASRMibRevMajor
OBJECT-TYPE
The major revision level of the MIB.
1.3.6.1.4.1.11.2.23.25.1.1INTEGER (1..65535)read-onlymandatory
hpnsaASRMibRevMinor
OBJECT-TYPE
The minor revision level of the MIB.
1.3.6.1.4.1.11.2.23.25.1.2INTEGER (0..65535)read-onlymandatory
hpnsaASRParms
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.23.25.2
hpnsaASRMaxConsecutiveASR
OBJECT-TYPE
This specifies the maximum number of consecutive ASR reboot allowed in this system, if exceeding this value, no ASR will be performed. 0 means no limit on maximum number of reboots, 1-10 for setting a limit
1.3.6.1.4.1.11.2.23.25.2.1INTEGER (0..10)read-writemandatory
hpnsaASRCurrentConsecutiveASR
OBJECT-TYPE
The current value of the number of consecutive ASR reboot happened so far.
1.3.6.1.4.1.11.2.23.25.2.2INTEGERread-onlymandatory
hpnsaASRTimeOutInterval
OBJECT-TYPE
Time out interval used for ASR reboot, if the timer is not reset/kicked during this interval, system will reboot
1.3.6.1.4.1.11.2.23.25.2.3INTEGERread-writemandatory
hpnsaASRKickInterval
OBJECT-TYPE
This is the fixed interval used to reset/kick the ASR watchdog timer to avoid the expiration of the timer which will trigger ASR
1.3.6.1.4.1.11.2.23.25.2.4INTEGERread-onlymandatory
hpnsaASRTimeoutAction
OBJECT-TYPE
This specifies the action that will be executed when the ASR timeout occurs, it can be no action - only logging, hard reset, or power cycle
1.3.6.1.4.1.11.2.23.25.2.5DisplayStringread-onlymandatory