RADLAN-IpRouter
- Registered at
- 1.3.6.1.4.1.89.26.18
- Last updated
- 2004-06-01 00:00
- Revisions
- 2004-06-01 00:00
- Namespace
- dell
- Source file
RADLAN-IpRouter- Digest
sha256:f26b7561288fb62c41ad00aded1177a1ddd7cea15fc6a9ee57d54c099b932d98
Description
The private MIB module definition for router MIB.
Imports
| From | Symbols |
|---|---|
| OSPF-MIB | AreaID, RouterID, ospfIfEntry, ospfVirtIfEntry |
| RADLAN-IP | ipRedundancy, ipRipFilter, ipRouteLeaking, ipSpec, rip2Spec, rlIpRoutingProtPreference, rlOspf |
| RFC1389-MIB | rip2IfConfEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANA-RTPROTO-MIB IANAifType-MIB IEEE8021-PAE-MIB IF-MIB INET-ADDRESS-MIB IP-FORWARD-MIB IP-MIB OSPF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RADLAN-IP RADLAN-IpRouter RADLAN-MIB RFC1158-MIB RFC1271-MIB RFC1389-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-SMI-v1 SNMPv2-TC SNMPv2-TC-v1 TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rsRip2IfConfTable OBJECT-TYPE This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2) | 1.3.6.1.4.1.89.26.3.1 | not-accessible | current | |
| rsRip2IfConfEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.26.3.1.1 | not-accessible | current | |
| rsRip2IfConfAddress OBJECT-TYPE The IP Address of this system on the indicated subnet. | 1.3.6.1.4.1.89.26.3.1.1.1 | IpAddress | read-only | current |
| rsRip2IfConfVirtualDis OBJECT-TYPE This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm. | 1.3.6.1.4.1.89.26.3.1.1.2 | INTEGER | read-write | current |
| rsRip2IfConfAutoSend OBJECT-TYPE This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration. | 1.3.6.1.4.1.89.26.3.1.1.3 | INTEGER {enable(1), disable(2)} | read-write | current |
| rlRip2IfConfKeyChain OBJECT-TYPE Name of the key-chain which rip2 interface uses for md5 authentication | 1.3.6.1.4.1.89.26.3.1.1.4 | DisplayString | read-write | current |
| rlRip2AutoInterfaceCreation OBJECT-TYPE This variable controls RIP automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of rip Interface. If value is disable Rip interface is created but not activated. The option is a platform parameter. | 1.3.6.1.4.1.89.26.3.2 | INTEGER {enable(1), disable(2)} | read-only | current |
| rlRip2MibVersion OBJECT-TYPE MIB's version, the current version is 1. | 1.3.6.1.4.1.89.26.3.3 | INTEGER | read-only | current |
| ipRedundAdminStatus OBJECT-TYPE This parameter controls the IP Redundancy in the device. In case the parameter is Enable and the other router becomes inoperational, all the traffic is handled by this element. | 1.3.6.1.4.1.89.26.6.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| ipRedundOperStatus OBJECT-TYPE obsolete | 1.3.6.1.4.1.89.26.6.2 | INTEGER {active(1), inactive(2)} | read-only | current |
| ipRedundRoutersTable OBJECT-TYPE List of IP addresses backed up by this router. | 1.3.6.1.4.1.89.26.6.3 | not-accessible | current | |
| ipRedundRoutersEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.89.26.6.3.1 | not-accessible | current | |
| ipRedundRoutersIfAddr OBJECT-TYPE The Ip address of the IP interface on which the redundancy feature is operational. | 1.3.6.1.4.1.89.26.6.3.1.1 | IpAddress | read-only | current |
| ipRedundRoutersMainRouterAddr OBJECT-TYPE The Ip address of the polled main router. | 1.3.6.1.4.1.89.26.6.3.1.2 | IpAddress | read-only | current |
| ipRedundRoutersOperStatus OBJECT-TYPE If active, the main router is considered inoperational and the IP interface operates as its backup. | 1.3.6.1.4.1.89.26.6.3.1.3 | INTEGER {active(1), inactive(2)} | read-only | current |
| ipRedundRoutersPollInterval OBJECT-TYPE Polling interval for this router (in seconds). If 0 the router is not polled. | 1.3.6.1.4.1.89.26.6.3.1.4 | INTEGER | read-write | current |
| ipRedundRoutersTimeout OBJECT-TYPE Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup. | 1.3.6.1.4.1.89.26.6.3.1.5 | INTEGER | read-write | current |
| ipRedundRoutersStatus OBJECT-TYPE Entry status | 1.3.6.1.4.1.89.26.6.3.1.6 | INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)} | read-write | current |
| ipLeakStaticToRip OBJECT-TYPE This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP. | 1.3.6.1.4.1.89.26.7.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| ipLeakStaticToOspf OBJECT-TYPE This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes. | 1.3.6.1.4.1.89.26.7.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| ipLeakOspfToRip OBJECT-TYPE This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP. | 1.3.6.1.4.1.89.26.7.3 | INTEGER {enable(1), disable(2)} | read-write | current |
| ipLeakRipToOspf OBJECT-TYPE This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes. | 1.3.6.1.4.1.89.26.7.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| ipLeakExtDirectToOspf OBJECT-TYPE This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes. | 1.3.6.1.4.1.89.26.7.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| rsIpRipFilterGlbTable OBJECT-TYPE The table of RIP global filters per IP router. | 1.3.6.1.4.1.89.26.8.1 | not-accessible | current | |
| rsIpRipFilterGlbEntry OBJECT-TYPE An entry in the RIP global filter table | 1.3.6.1.4.1.89.26.8.1.1 | not-accessible | current | |
| rsIpRipFilterGlbType OBJECT-TYPE Type of filter - input/output | 1.3.6.1.4.1.89.26.8.1.1.1 | INTEGER {input(1), output(2)} | read-only | current |
| rsIpRipFilterGlbNumber OBJECT-TYPE Number of RIP filter. | 1.3.6.1.4.1.89.26.8.1.1.2 | INTEGER | read-only | current |
| rsIpRipFilterGlbStatus OBJECT-TYPE The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. | 1.3.6.1.4.1.89.26.8.1.1.3 | INTEGER {valid(1), invalid(2), underCreation(3)} | read-write | current |
| rsIpRipFilterGlbIpAddr OBJECT-TYPE network prefix IP address, as in the forwarding table. | 1.3.6.1.4.1.89.26.8.1.1.4 | IpAddress | read-write | current |
| rsIpRipFilterGlbNetworkMaskBits OBJECT-TYPE the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 | 1.3.6.1.4.1.89.26.8.1.1.5 | INTEGER | read-write | current |
| rsIpRipFilterGlbMatchBits OBJECT-TYPE the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored. | 1.3.6.1.4.1.89.26.8.1.1.6 | INTEGER | read-write | current |
| rsIpRipFilterGlbAction OBJECT-TYPE Filter action - permit/deny for this network | 1.3.6.1.4.1.89.26.8.1.1.7 | INTEGER {deny(1), permit(2)} | read-write | current |
| rsIpRipFilterLclTable OBJECT-TYPE Table of input/output RIP filters used per IP Interface. | 1.3.6.1.4.1.89.26.8.2 | not-accessible | current | |
| rsIpRipFilterLclEntry OBJECT-TYPE An entry in the Intf RIP filter table | 1.3.6.1.4.1.89.26.8.2.1 | not-accessible | current | |
| rsIpRipFilterLclIpIntf OBJECT-TYPE The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr. | 1.3.6.1.4.1.89.26.8.2.1.1 | IpAddress | read-only | current |
| rsIpRipFilterLclType OBJECT-TYPE Type of filter - input/output | 1.3.6.1.4.1.89.26.8.2.1.2 | INTEGER {input(1), output(2)} | read-only | current |
| rsIpRipFilterLclNumber OBJECT-TYPE Number of RIP filter for this Interface | 1.3.6.1.4.1.89.26.8.2.1.3 | INTEGER | read-only | current |
| rsIpRipFilterLclStatus OBJECT-TYPE The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. | 1.3.6.1.4.1.89.26.8.2.1.4 | INTEGER {valid(1), invalid(2), underCreation(3)} | read-write | current |
| rsIpRipFilterLclIpAddr OBJECT-TYPE network prefix IP address, as in the forwarding table. | 1.3.6.1.4.1.89.26.8.2.1.5 | IpAddress | read-write | current |
| rsIpRipFilterLclNetworkMaskBits OBJECT-TYPE the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 | 1.3.6.1.4.1.89.26.8.2.1.6 | INTEGER | read-write | current |
| rsIpRipFilterLclMatchBits OBJECT-TYPE the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored. | 1.3.6.1.4.1.89.26.8.2.1.7 | INTEGER | read-write | current |
| rsIpRipFilterLclAction OBJECT-TYPE Filter action - permit/deny | 1.3.6.1.4.1.89.26.8.2.1.8 | INTEGER {deny(1), permit(2)} | read-write | current |
| rlIpRoutingProtPreferenceDirect OBJECT-TYPE The Preference given to routes whose origin is Local IP (i.e. IP interface in IpAddrTable) It is proposed that the value will be higher than dynamic routing protocols. The change of its value may lead to unexpected results, such as routing loops | 1.3.6.1.4.1.89.26.13.1 | INTEGER (0..254) | read-write | current |
| rlIpRoutingProtPreferenceStatic OBJECT-TYPE The Preference given to routes whose origin is Men configured by Net managment tools, i.e. Command line or SNMP configured. | 1.3.6.1.4.1.89.26.13.2 | INTEGER (0..255) | read-write | current |
| rlIpRoutingProtPreferenceOspfInter OBJECT-TYPE The Preference given to routes whose origin is internal ospf Links. Relate to routes which are based on OSPF Link State Advertisements of type 1-4 | 1.3.6.1.4.1.89.26.13.3 | INTEGER (0..255) | read-write | current |
| rlIpRoutingProtPreferenceOspfExt OBJECT-TYPE The Preference given to routes whose origin is external to OSPF i.e. routes imported by as OSPF AS Border router. Relate to routes which are based on OSPF Link State Advertisements of types 5 and 7 | 1.3.6.1.4.1.89.26.13.4 | INTEGER (0..255) | read-write | current |
| rlIpRoutingProtPreferenceOspfReject OBJECT-TYPE The Preference given to routes whose origin is OSPF and Are inserted to cover gaps in net range | 1.3.6.1.4.1.89.26.13.5 | INTEGER (0..255) | read-write | current |
| rlIpRoutingProtPreferenceRipNormal OBJECT-TYPE The Preference given to routes whose origin is RIP routing domain | 1.3.6.1.4.1.89.26.13.6 | INTEGER (0..255) | read-write | current |
| rlIpRoutingProtPreferenceRipAggregate OBJECT-TYPE The Preference given to routes whose origin is aggregation As a method of rip1 to handle the CIDR schema. The idea is that ripv1 aggregates route which fall into certion class of IP. This route is a discard route in effect, and is referenced, at forwarding route look up, if there is no beter match. (which means the route is not available) | 1.3.6.1.4.1.89.26.13.7 | INTEGER (0..255) | read-write | current |
| rlIpRoutingProtPreferenceBgp OBJECT-TYPE The Preference given to routes whose origin is BGP ROUTERS (EBGP or IBGP) | 1.3.6.1.4.1.89.26.13.8 | INTEGER (0..255) | read-write | current |
| rlOspfMibVersion OBJECT-TYPE MIB's version, the current version is 1. | 1.3.6.1.4.1.89.26.14.1 | INTEGER | read-only | current |
| rlOspfAutoInterfaceCreation OBJECT-TYPE This variable controls OSPF automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of OSPF Interface. If value is disable OSPF interface is created but not activated. The option is a platform parameter. | 1.3.6.1.4.1.89.26.14.2 | INTEGER {enable(1), disable(2)} | read-only | current |
| rlOspfIfExtTable OBJECT-TYPE The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. | 1.3.6.1.4.1.89.26.14.3 | not-accessible | current | |
| rlOspfIfExtEntry OBJECT-TYPE The OSPF interface table extension for md5 authentication | 1.3.6.1.4.1.89.26.14.3.1 | not-accessible | current | |
| rlOspfifKeyChain OBJECT-TYPE Name of the key-chain which ospf interface uses for md5 authentication | 1.3.6.1.4.1.89.26.14.3.1.1 | DisplayString | read-write | current |
| rlOspfRtrLnkTable OBJECT-TYPE Router Link State Advertisement. | 1.3.6.1.4.1.89.26.14.4 | not-accessible | current | |
| rlOspfRtrLnkEntry OBJECT-TYPE A single entry from Router LSA. | 1.3.6.1.4.1.89.26.14.4.1 | not-accessible | current | |
| rlOspfRtrLnkAreaId OBJECT-TYPE The 32 bit identifier of the Area from which the LSA was received. | 1.3.6.1.4.1.89.26.14.4.1.1 | AreaID | read-only | current |
| rlOspfRtrLnkLsid OBJECT-TYPE The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.4.1.89.26.14.4.1.2 | IpAddress | read-only | current |
| rlOspfRtrLnkRouterId OBJECT-TYPE The 32 bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.89.26.14.4.1.3 | RouterID | read-only | current |
| rlOspfRtrLnkIdx OBJECT-TYPE The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries. | 1.3.6.1.4.1.89.26.14.4.1.4 | Unsigned32 (1..65535) | read-only | current |
| rlOspfRtrLnkSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.4.1.89.26.14.4.1.5 | Integer32 | read-only | current |
| rlOspfRtrLnkAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.89.26.14.4.1.6 | Integer32 | read-only | current |
| rlOspfRtrLnkChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.89.26.14.4.1.7 | Integer32 | read-only | current |
| rlOspfRtrLnkLength OBJECT-TYPE The lenth in bytes of the LSA. This includes the 20 byte LSA header. | 1.3.6.1.4.1.89.26.14.4.1.8 | Unsigned32 | read-only | current |
| rlOspfRtrLnkBitV OBJECT-TYPE When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint). | 1.3.6.1.4.1.89.26.14.4.1.9 | INTEGER {off(1), on(2)} | read-only | current |
| rlOspfRtrLnkBitE OBJECT-TYPE When set, the router is an AS boundary router (E is for external). | 1.3.6.1.4.1.89.26.14.4.1.10 | INTEGER {off(1), on(2)} | read-only | current |
| rlOspfRtrLnkBitB OBJECT-TYPE When set, the router is an area border router (B is for border). | 1.3.6.1.4.1.89.26.14.4.1.11 | INTEGER {off(1), on(2)} | read-only | current |
| rlOspfRtrLnkLinks OBJECT-TYPE The number of router links described in this LSA. This must be the total collection of router links (i.e., interfaces) to the area. | 1.3.6.1.4.1.89.26.14.4.1.12 | Unsigned32 | read-only | current |
| rlOspfRtrLnkLinkID OBJECT-TYPE Identifies the object that this router link connects to. Value depends on the link's Type. | 1.3.6.1.4.1.89.26.14.4.1.13 | IpAddress | read-only | current |
| rlOspfRtrLnkLinkData OBJECT-TYPE Value depends on the link's Type field. | 1.3.6.1.4.1.89.26.14.4.1.14 | IpAddress | read-only | current |
| rlOspfRtrLnkType OBJECT-TYPE A quick description of the router link. | 1.3.6.1.4.1.89.26.14.4.1.15 | INTEGER {pointToPoint(1), transitNetwork(2), stubNetwork(3), virtualLink(4)} | read-only | current |
| rlOspfRtrLnkMetric OBJECT-TYPE The cost of using this router link. | 1.3.6.1.4.1.89.26.14.4.1.16 | Unsigned32 | read-only | current |
| rlOspfNetLnkTable OBJECT-TYPE Network Link State Advertisement. | 1.3.6.1.4.1.89.26.14.5 | not-accessible | current | |
| rlOspfNetLnkEntry OBJECT-TYPE A single entry from Network LSA. | 1.3.6.1.4.1.89.26.14.5.1 | not-accessible | current | |
| rlOspfNetLnkAreaId OBJECT-TYPE The 32 bit identifier of the Area from which the LSA was received. | 1.3.6.1.4.1.89.26.14.5.1.1 | AreaID | read-only | current |
| rlOspfNetLnkLsid OBJECT-TYPE The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.4.1.89.26.14.5.1.2 | IpAddress | read-only | current |
| rlOspfNetLnkRouterId OBJECT-TYPE The 32 bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.89.26.14.5.1.3 | RouterID | read-only | current |
| rlOspfNetLnkIdx OBJECT-TYPE The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries. | 1.3.6.1.4.1.89.26.14.5.1.4 | Unsigned32 (1..65535) | read-only | current |
| rlOspfNetLnkSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.4.1.89.26.14.5.1.5 | Integer32 | read-only | current |
| rlOspfNetLnkAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.89.26.14.5.1.6 | Integer32 | read-only | current |
| rlOspfNetLnkChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.89.26.14.5.1.7 | Integer32 | read-only | current |
| rlOspfNetLnkLength OBJECT-TYPE The lenth in bytes of the LSA. This includes the 20 byte LSA header. | 1.3.6.1.4.1.89.26.14.5.1.8 | Unsigned32 | read-only | current |
| rlOspfNetLnkMask OBJECT-TYPE The IP address mask for the network. | 1.3.6.1.4.1.89.26.14.5.1.9 | IpAddress | read-only | current |
| rlOspfNetLnkAttRouter OBJECT-TYPE The Router IDs of each of the routers attached to the network. | 1.3.6.1.4.1.89.26.14.5.1.10 | IpAddress | read-only | current |
| rlOspfSumLnkTable OBJECT-TYPE Summary Link State Advertisement for network (Type 3). | 1.3.6.1.4.1.89.26.14.6 | not-accessible | current | |
| rlOspfSumLnkEntry OBJECT-TYPE A single entry from Summary LSA. | 1.3.6.1.4.1.89.26.14.6.1 | not-accessible | current | |
| rlOspfSumLnkAreaId OBJECT-TYPE The 32 bit identifier of the Area from which the LSA was received. | 1.3.6.1.4.1.89.26.14.6.1.1 | AreaID | read-only | current |
| rlOspfSumLnkLsid OBJECT-TYPE The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.4.1.89.26.14.6.1.2 | IpAddress | read-only | current |
| rlOspfSumLnkRouterId OBJECT-TYPE The 32 bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.89.26.14.6.1.3 | RouterID | read-only | current |
| rlOspfSumLnkSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.4.1.89.26.14.6.1.4 | Integer32 | read-only | current |
| rlOspfSumLnkAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.89.26.14.6.1.5 | Integer32 | read-only | current |
| rlOspfSumLnkChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.89.26.14.6.1.6 | Integer32 | read-only | current |
| rlOspfSumLnkLength OBJECT-TYPE The lenth in bytes of the LSA. This includes the 20 byte LSA header. | 1.3.6.1.4.1.89.26.14.6.1.7 | Unsigned32 | read-only | current |
| rlOspfSumLnkMask OBJECT-TYPE Value depends on the link's Type field. | 1.3.6.1.4.1.89.26.14.6.1.8 | IpAddress | read-only | current |
| rlOspfSumLnkMetric OBJECT-TYPE The cost of using this router link. | 1.3.6.1.4.1.89.26.14.6.1.9 | Unsigned32 | read-only | current |
| rlOspfAsbLnkTable OBJECT-TYPE Summary Link State Advertisement for ASBR (Type 4). | 1.3.6.1.4.1.89.26.14.7 | not-accessible | current | |
| rlOspfAsbLnkEntry OBJECT-TYPE A single entry from Summary LSA. | 1.3.6.1.4.1.89.26.14.7.1 | not-accessible | current | |
| rlOspfAsbLnkAreaId OBJECT-TYPE The 32 bit identifier of the Area from which the LSA was received. | 1.3.6.1.4.1.89.26.14.7.1.1 | AreaID | read-only | current |
| rlOspfAsbLnkLsid OBJECT-TYPE The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.4.1.89.26.14.7.1.2 | IpAddress | read-only | current |
| rlOspfAsbLnkRouterId OBJECT-TYPE The 32 bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.89.26.14.7.1.3 | RouterID | read-only | current |
| rlOspfAsbLnkSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.4.1.89.26.14.7.1.4 | Integer32 | read-only | current |
| rlOspfAsbLnkAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.89.26.14.7.1.5 | Integer32 | read-only | current |
| rlOspfAsbLnkChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.89.26.14.7.1.6 | Integer32 | read-only | current |
| rlOspfAsbLnkLength OBJECT-TYPE The lenth in bytes of the LSA. This includes the 20 byte LSA header. | 1.3.6.1.4.1.89.26.14.7.1.7 | Unsigned32 | read-only | current |
| rlOspfAsbLnkMetric OBJECT-TYPE The cost of using this router link. | 1.3.6.1.4.1.89.26.14.7.1.8 | Unsigned32 | read-only | current |
| rlOspfAseLnkTable OBJECT-TYPE External Link State Advertisement. | 1.3.6.1.4.1.89.26.14.8 | not-accessible | current | |
| rlOspfAseLnkEntry OBJECT-TYPE A single entry from External LSA. | 1.3.6.1.4.1.89.26.14.8.1 | not-accessible | current | |
| rlOspfAseLnkLsid OBJECT-TYPE The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.4.1.89.26.14.8.1.1 | IpAddress | read-only | current |
| rlOspfAseLnkRouterId OBJECT-TYPE The 32 bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.89.26.14.8.1.2 | RouterID | read-only | current |
| rlOspfAseLnkSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.4.1.89.26.14.8.1.3 | Integer32 | read-only | current |
| rlOspfAseLnkAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.89.26.14.8.1.4 | Integer32 | read-only | current |
| rlOspfAseLnkChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.89.26.14.8.1.5 | Integer32 | read-only | current |
| rlOspfAseLnkLength OBJECT-TYPE The lenth in bytes of the LSA. This includes the 20 byte LSA header. | 1.3.6.1.4.1.89.26.14.8.1.6 | Unsigned32 | read-only | current |
| rlOspfAseLnkMask OBJECT-TYPE Value depends on the link's Type field. | 1.3.6.1.4.1.89.26.14.8.1.7 | IpAddress | read-only | current |
| rlOspfAseLnkFrwAddress OBJECT-TYPE Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router). | 1.3.6.1.4.1.89.26.14.8.1.8 | IpAddress | read-only | current |
| rlOspfAseLnkBitE OBJECT-TYPE The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. | 1.3.6.1.4.1.89.26.14.8.1.9 | INTEGER {off(1), on(2)} | read-only | current |
| rlOspfAseLnkMetric OBJECT-TYPE The cost of this route. | 1.3.6.1.4.1.89.26.14.8.1.10 | Unsigned32 | read-only | current |
| rlOspfAseLnkTag OBJECT-TYPE A 32-bit field attached to each external route. | 1.3.6.1.4.1.89.26.14.8.1.11 | Unsigned32 | read-only | current |
| rlospfVirtIfExtTable OBJECT-TYPE The Virtual Interface Table describes the virtual links that the OSPF Process is configured to carry on. | 1.3.6.1.4.1.89.26.14.9 | not-accessible | current | |
| rlospfVirtIfExtEntry OBJECT-TYPE The OSPF virtual interface table extension for md5 authentication | 1.3.6.1.4.1.89.26.14.9.1 | not-accessible | current | |
| rlospfVirtifKeyChain OBJECT-TYPE Name of the key-chain which ospf virtual interface uses for md5 authentication | 1.3.6.1.4.1.89.26.14.9.1.1 | DisplayString | read-write | current |