Finisher-MIB
- Registered at
- 1.3.6.1.2.1.43.2.61.3.6.1.2.1.43.301.3.6.1.2.1.43.311.3.6.1.2.1.43.321.3.6.1.2.1.43.331.3.6.1.2.1.111
- Last updated
- 2004-06-02 00:00
- Organization
- PWG IEEE/ISTO Printer Working Group
- Revisions
- 2004-06-02 00:00
- Namespace
- standard
- Source file
Finisher-MIB- Digest
sha256:042bb7d8731e6c4665f3584e293969ec9c9c27b152d78d1fbfee520a2f5f0ae7
Description
The MIB module for management of printers. Copyright (C) The Internet Society (2004). This version of this MIB module was published in RFC 3806. For full legal notices see the RFC itself.
Contact
Harry Lewis IBM Phone (303) 924-5337 Email: harryl@us.ibm.com Send comments to the printmib WG using the Finisher MIB Project (FIN) Mailing List: fin@pwg.org For further information, access the PWG web page under 'Finisher MIB': http://www.pwg.org/ Implementers of this specification are encouraged to join the fin mailing list in order to participate in discussions on any clarifications needed and registration proposals being reviewed in order to achieve consensus.
Imports
| From | Symbols |
|---|---|
| HOST-RESOURCES-MIB | hrDeviceIndex |
| IANA-FINISHER-MIB | FinAttributeTypeTC, FinDeviceTypeTC |
| IANA-PRINTER-MIB | PrtInputTypeTC, PrtMarkerSuppliesTypeTC |
| Printer-MIB | PresentOnOff, PrtCapacityUnitTC, PrtLocalizedDescriptionStringTC, PrtMarkerSuppliesClassTC, PrtMarkerSuppliesSupplyUnitTC, PrtMediaUnitTC, PrtSubUnitStatusTC, printmib, prtMIBConformance |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, mib-2 |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
Finisher-MIB HOST-RESOURCES-MIB IANA-CHARSET-MIB IANA-FINISHER-MIB IANA-PRINTER-MIB IANAifType-MIB IF-MIB Printer-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| finMIBGroups OBJECT-IDENTITY | 1.3.6.1.2.1.43.2.6 | |||
| finDevice OBJECT-IDENTITY | 1.3.6.1.2.1.43.30 | |||
| finDeviceTable OBJECT-TYPE This table defines the finishing device subunits, including information regarding possible configuration options and the status for each finisher device subunit. | 1.3.6.1.2.1.43.30.1 | not-accessible | current | |
| finDeviceEntry OBJECT-TYPE There is an entry in the finishing device table for each possible finisher process. Each individual finisher process is implemented by a finishing device represented in this table. | 1.3.6.1.2.1.43.30.1.1 | not-accessible | current | |
| finDeviceIndex OBJECT-TYPE A unique value used to identify a finisher process. Although these values may change due to a major reconfiguration of the printer system (e.g., the addition of new finishing processes), the values are normally expected to remain stable across successive power cycles. | 1.3.6.1.2.1.43.30.1.1.1 | Integer32 (1..65535) | not-accessible | current |
| finDeviceType OBJECT-TYPE Defines the type of finishing process associated with this table row entry. | 1.3.6.1.2.1.43.30.1.1.2 | FinDeviceTypeTC | read-only | current |
| finDevicePresentOnOff OBJECT-TYPE Indicates if this finishing device subunit is available and whether the device subunit is enabled. | 1.3.6.1.2.1.43.30.1.1.3 | PresentOnOff | read-write | current |
| finDeviceCapacityUnit OBJECT-TYPE The unit of measure for specifying the capacity of this finisher device subunit. | 1.3.6.1.2.1.43.30.1.1.4 | PrtCapacityUnitTC | read-only | current |
| finDeviceMaxCapacity OBJECT-TYPE The maximum capacity of this finisher device subunit in finDeviceCapacityUnits. If the device can reliably sense this value, the value is sensed by the finisher device and is read-only: otherwise the value may be written by a management or control console application. The value (-1) means other and specifically indicates that the device places no restrictions on this parameter. The value (-2) means unknown. | 1.3.6.1.2.1.43.30.1.1.5 | Integer32 (-2..2147483647) | read-write | current |
| finDeviceCurrentCapacity OBJECT-TYPE The current capacity of this finisher device subunit in finDeviceCapacityUnits. If the device can reliably sense this value, the value is sensed by the finisher and is read-only: otherwise the value may be written by a management or control console application. The value (-1) means other and specifically indicates that the device places no restrictions on this parameter. The value (-2) means unknown. | 1.3.6.1.2.1.43.30.1.1.6 | Integer32 (-2..2147483647) | read-write | current |
| finDeviceAssociatedMediaPaths OBJECT-TYPE Indicates the media paths which can supply media for this finisher device. The value of this object is a bit map in an octet string with each position representing the value of a prtMediaPathIndex. For a media path that can be a source for this finisher device subunit, the bit position equal to one less than the value of prtMediaPathIndex will be set. The bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant of the second byte being bit 8, and so on. | 1.3.6.1.2.1.43.30.1.1.7 | OCTET STRING (SIZE(1..63)) | read-only | current |
| finDeviceAssociatedOutputs OBJECT-TYPE Indicates the printer output subunits this finisher device subunit services. The value of this object is a bit map in an octet string with each position representing the value of a prtOutputIndex. For an output subunit that is serviced by this finisher device subunit, the bit position equal to one less than the value of prtOutputIndex will be set. The bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant of the second byte being bit 8, and so on. | 1.3.6.1.2.1.43.30.1.1.8 | OCTET STRING (SIZE(1..63)) | read-only | current |
| finDeviceStatus OBJECT-TYPE Indicates the current status of this finisher device subunit. | 1.3.6.1.2.1.43.30.1.1.9 | PrtSubUnitStatusTC | read-only | current |
| finDeviceDescription OBJECT-TYPE A free form text description of this device subunit in the localization specified by prtGeneralCurrentLocalization. | 1.3.6.1.2.1.43.30.1.1.10 | PrtLocalizedDescriptionStringTC | read-only | current |
| finSupply OBJECT-IDENTITY | 1.3.6.1.2.1.43.31 | |||
| finSupplyTable OBJECT-TYPE Each unique source of supply is an entry in the finisher supply table. Each supply entry has its own characteristics associated with it such as colorant and current supply level. | 1.3.6.1.2.1.43.31.1 | not-accessible | current | |
| finSupplyEntry OBJECT-TYPE A list of finisher devices, with their associated supplies and supplies characteristics. | 1.3.6.1.2.1.43.31.1.1 | not-accessible | current | |
| finSupplyIndex OBJECT-TYPE A unique value used by a finisher to identify this supply container/receptacle. Although these values may change due to a major reconfiguration of the finisher (e.g., the addition of new supply sources to the finisher), values are normally expected to remain stable across successive power cycles. | 1.3.6.1.2.1.43.31.1.1.1 | Integer32 (1..65535) | not-accessible | current |
| finSupplyDeviceIndex OBJECT-TYPE The value of finDeviceIndex corresponding to the finishing device subunit with which this finisher supply is associated. The value zero indicates the associated finishing device is Unknown. | 1.3.6.1.2.1.43.31.1.1.2 | Integer32 (0..65535) | read-only | current |
| finSupplyClass OBJECT-TYPE This value indicates whether this supply entity represents a supply that is consumed or a container that is filled. | 1.3.6.1.2.1.43.31.1.1.3 | PrtMarkerSuppliesClassTC | read-only | current |
| finSupplyType OBJECT-TYPE The type of this supply. | 1.3.6.1.2.1.43.31.1.1.4 | PrtMarkerSuppliesTypeTC | read-only | current |
| finSupplyDescription OBJECT-TYPE The description of this supply/receptacle in text useful for operators and management applications and in the localization specified by prtGeneralCurrentLocalization. | 1.3.6.1.2.1.43.31.1.1.5 | PrtLocalizedDescriptionStringTC | read-only | current |
| finSupplyUnit OBJECT-TYPE Unit of measure of this finisher supply container or receptacle. | 1.3.6.1.2.1.43.31.1.1.6 | PrtMarkerSuppliesSupplyUnitTC | read-only | current |
| finSupplyMaxCapacity OBJECT-TYPE The maximum capacity of this supply container/receptacle expressed in Supply Units. If this supply container/ receptacle can reliably sense this value, the value is sensed and is read-only; otherwise the value may be written by a control panel or management application. The value (-1) means other and places no restrictions on this parameter. The value (-2) means unknown. | 1.3.6.1.2.1.43.31.1.1.7 | Integer32 (-2..2147483647) | read-write | current |
| finSupplyCurrentLevel OBJECT-TYPE The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is sensed and is read-only; otherwise the value may be written by a control panel or management application. The value (-1) means other and places no restrictions on this parameter. The value (-2) means unknown. A value of (-3) means that the printer knows there is some supply or remaining space. | 1.3.6.1.2.1.43.31.1.1.8 | Integer32 (-3..2147483647) | read-write | current |
| finSupplyColorName OBJECT-TYPE The name of the color associated with this supply. | 1.3.6.1.2.1.43.31.1.1.9 | OCTET STRING (SIZE(0..63)) | read-only | current |
| finSupplyMediaInput OBJECT-IDENTITY | 1.3.6.1.2.1.43.32 | |||
| finSupplyMediaInputTable OBJECT-TYPE The input subunits associated with a finisher supply media are each represented by an entry in this table. | 1.3.6.1.2.1.43.32.1 | not-accessible | current | |
| finSupplyMediaInputEntry OBJECT-TYPE A list of finisher supply media input subunit features and characteristics. | 1.3.6.1.2.1.43.32.1.1 | not-accessible | current | |
| finSupplyMediaInputIndex OBJECT-TYPE A unique value used by a finisher to identify this supply media input subunit. Although these values may change due to a major reconfiguration of the finisher (e.g., the addition of new supply media input sources to the finisher), values are normally expected to remain stable across successive power cycles. | 1.3.6.1.2.1.43.32.1.1.1 | Integer32 (1..65535) | not-accessible | current |
| finSupplyMediaInputDeviceIndex OBJECT-TYPE The value of finDeviceIndex corresponding to the finishing device subunit with which this finisher media supply is associated. The value zero indicates the associated device is unknown. | 1.3.6.1.2.1.43.32.1.1.2 | Integer32 (0..65535) | read-only | current |
| finSupplyMediaInputSupplyIndex OBJECT-TYPE The value of finSupplyIndex corresponding to the finishing supply subunit with which this finisher media supply is associated. The value zero indicates the associated finishing supply is unknown or there is no applicable finisher supply table entry. | 1.3.6.1.2.1.43.32.1.1.3 | Integer32 (0..65535) | read-only | current |
| finSupplyMediaInputType OBJECT-TYPE The type of technology (discriminated primarily according to the feeder mechanism type) employed by the input subunit. | 1.3.6.1.2.1.43.32.1.1.4 | PrtInputTypeTC | read-only | current |
| finSupplyMediaInputDimUnit OBJECT-TYPE The unit of measure for specifying dimensional values for this input device. | 1.3.6.1.2.1.43.32.1.1.5 | PrtMediaUnitTC | read-only | current |
| finSupplyMediaInputMediaDimFeedDir OBJECT-TYPE This object provides the value of the dimension in the feed direction of the media that is placed or will be placed in this input device. Feed dimension measurements are taken parallel to the feed direction of the device and measured in finSupplyMediaInputDimUnits. If this input device can reliably sense this value, the value is sensed and is read-only access. Otherwise the value is read-write access and may be written by management or control panel applications. The value (-1) means other and specifically indicates that this device places no restrictions on this parameter. The value (-2) indicates unknown. | 1.3.6.1.2.1.43.32.1.1.6 | Integer32 (-2..2147483647) | read-write | current |
| finSupplyMediaInputMediaDimXFeedDir OBJECT-TYPE This object provides the value of the dimension across the feed direction of the media that is placed or will be placed in this input device. The cross feed direction is ninety degrees relative to the feed direction on this device and measured in finSupplyMediaInputDimUnits. If this input device can reliably sense this value, the value is sensed and is read-only access. Otherwise the value is read-write access and may be written by management or control panel applications. The value (-1) means other and specifically indicates that this device places no restrictions on this parameter. The value (-2) indicates unknown. | 1.3.6.1.2.1.43.32.1.1.7 | Integer32 (-2..2147483647) | read-write | current |
| finSupplyMediaInputStatus OBJECT-TYPE This value indicates the current status of this input device. | 1.3.6.1.2.1.43.32.1.1.8 | PrtSubUnitStatusTC | read-only | current |
| finSupplyMediaInputMediaName OBJECT-TYPE The name of the current media contained in this input device. Examples are Engineering Manual Cover, Section A Tab Divider or any ISO standard names. | 1.3.6.1.2.1.43.32.1.1.9 | OCTET STRING (SIZE(0..63)) | read-write | current |
| finSupplyMediaInputName OBJECT-TYPE The name assigned to this input subunit. | 1.3.6.1.2.1.43.32.1.1.10 | OCTET STRING (SIZE(0..63)) | read-write | current |
| finSupplyMediaInputDescription OBJECT-TYPE A free form text description of this input subunit in the localization specified by prtGeneralCurrentLocalization. | 1.3.6.1.2.1.43.32.1.1.11 | PrtLocalizedDescriptionStringTC | read-only | current |
| finSupplyMediaInputSecurity OBJECT-TYPE Indicates if this subunit has some security associated with it. | 1.3.6.1.2.1.43.32.1.1.12 | PresentOnOff | read-write | current |
| finSupplyMediaInputMediaWeight OBJECT-TYPE The weight of the media associated with this Input device in grams per meter squared. The value (-1) means other and specifically indicates that the device places no restriction on this parameter. The value (-2) means unknown. This object can be used to calculate the weight of individual pages processed by the document finisher. This value, when multiplied by the number of pages in a finished set, can be used to calculate the weight of a set before it is inserted into a mailing envelope. | 1.3.6.1.2.1.43.32.1.1.13 | Integer32 | read-write | current |
| finSupplyMediaInputMediaThickness OBJECT-TYPE This object identifies the thickness of the input media processed by this document input subunit measured in micrometers. This value may be used by devices (or operators) to set up proper machine tolerances for the feeder operation. The value (-2) indicates that the media thickness is unknown or not used in the setup for this input subunit. | 1.3.6.1.2.1.43.32.1.1.14 | Integer32 (-2..2147483647) | read-write | current |
| finSupplyMediaInputMediaType OBJECT-TYPE The name of the type of medium associated with this input subunit. | 1.3.6.1.2.1.43.32.1.1.15 | OCTET STRING (SIZE(0..63)) | read-write | current |
| finDeviceAttribute OBJECT-IDENTITY | 1.3.6.1.2.1.43.33 | |||
| finDeviceAttributeTable OBJECT-TYPE The attribute table defines special parameters that are applicable only to a minority of the finisher devices. An attribute table entry is used, rather than unique objects, to minimize the number of MIB objects and to allow for expansion without the addition of MIB objects. Each finisher device is represented by a separate row in the device subunit attribute table. | 1.3.6.1.2.1.43.33.1 | not-accessible | current | |
| finDeviceAttributeEntry OBJECT-TYPE Each entry defines a finisher function parameter that cannot be represented by an object in the finisher device subunit table. | 1.3.6.1.2.1.43.33.1.1 | not-accessible | current | |
| finDeviceAttributeTypeIndex OBJECT-TYPE Defines the attribute type represented by this row. | 1.3.6.1.2.1.43.33.1.1.1 | FinAttributeTypeTC | not-accessible | current |
| finDeviceAttributeInstanceIndex OBJECT-TYPE An index that allows the discrimination of an attribute instance when the same attribute occurs multiple times for a specific instance of a finisher function. The value of this index shall be 1 if only a single instance of the attribute occurs for the specific finisher function. Additional values shall be assigned in a contiguous manner. | 1.3.6.1.2.1.43.33.1.1.2 | Integer32 (1..65535) | not-accessible | current |
| finDeviceAttributeValueAsInteger OBJECT-TYPE Defines the integer value of the attribute. The value of the attribute is represented as an integer if the finAttributeTypeTC description for the attribute has the tag 'INTEGER:'. Depending upon the attribute enum definition, this object may be either an integer, a counter, an index, or an enum. Attributes for which the concept of an integer value is not meaningful SHALL return a value of -1 for this attribute. | 1.3.6.1.2.1.43.33.1.1.3 | Integer32 (-2..2147483647) | read-write | current |
| finDeviceAttributeValueAsOctets OBJECT-TYPE Contains the octet string value of the attribute. The value of the attribute is represented as a string if the finAttributeTypeTC description for the attribute has the tag 'OCTETS:'. Depending upon the attribute enum definition, this object may be either a coded character set string (text) or a binary octet string. Attributes for which the concept of an octet string value is not meaningful SHALL contain a zero length string. | 1.3.6.1.2.1.43.33.1.1.4 | OCTET STRING (SIZE(0..63)) | read-write | current |
Conformance
| Name | OID | Status |
|---|---|---|
| finMIBCompliance MODULE-COMPLIANCE The compliance statement for agents that implement the finisher MIB. | 1.3.6.1.2.1.43.2.5 | current |
| finDeviceGroup OBJECT-GROUP The finisher device group. | 1.3.6.1.2.1.43.2.6.1 | current |
| finSupplyGroup OBJECT-GROUP The finisher supply group. | 1.3.6.1.2.1.43.2.6.2 | current |
| finSupplyMediaInputGroup OBJECT-GROUP The finisher supply, media input group. | 1.3.6.1.2.1.43.2.6.3 | current |
| finDeviceAttributeGroup OBJECT-GROUP The finisher device attribute group. This group is mandatory for a finisher device that contains an inserter subunit. | 1.3.6.1.2.1.43.2.6.4 | current |