IANA-FINISHER-MIB
- Registered at
- 1.3.6.1.2.1.110
- Last updated
- 2004-06-02 00:00
- Organization
- IANA
- Revisions
- 2004-06-02 00:00
- Namespace
- standard
- Source file
IANA-FINISHER-MIB- Digest
sha256:297b9764ebf048582f5cf914c92f85d17f4691102b3ea870f8fd1f65ad407b7c
Description
This MIB module defines a set of finishing-related TEXTUAL-CONVENTIONs for use in Finisher MIB (RFC 3806) and other MIBs which need to specify finishing mechanism details. Any additions or changes to the contents of this MIB module require either publication of an RFC, or Designated Expert Review as defined in RFC 2434, Guidelines for Writing an IANA Considerations Section in RFCs. The Designated Expert will be selected by the IESG Area Director(s) of the Applications Area. Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3806. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html
Contact
Internet Assigned Numbers Authority Postal: ICANN 4676 Admiralty Way, Suite 330 Marina del Rey, CA 90292 Tel: +1 310 823 9358 E-Mail: iana@iana.org
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, mib-2 |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-FINISHER-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| FinAttributeTypeTC TEXTUAL-CONVENTION This TEXTUAL-CONVENTION defines the set of enums for use in the finDeviceAttributeTable. See section 5.7 for the complete specification of each attribute. | current | |||
| FinBindingTypeTC TEXTUAL-CONVENTION The defined binding type enumerations. | current | |||
| FinDeviceTypeTC TEXTUAL-CONVENTION The defined finishing device subunit process enumerations. | current | |||
| FinEdgeTC TEXTUAL-CONVENTION Specifies an edge for a Finishing Process. | current | |||
| FinFoldingTypeTC TEXTUAL-CONVENTION The defined folding device process enumerations. | current | |||
| FinPunchHoleTypeTC TEXTUAL-CONVENTION The defined hole type punch process enumerations. | current | |||
| FinPunchPatternTC TEXTUAL-CONVENTION The defined hole pattern punch process enumerations. | current | |||
| FinSlittingTypeTC TEXTUAL-CONVENTION The defined slitting type enumerations. | current | |||
| FinStackOutputTypeTC TEXTUAL-CONVENTION The defined stack output type enumerations. | current | |||
| FinStitchingAngleTypeTC TEXTUAL-CONVENTION This enumeration provides a description of the angular orientation of each stitch in a single or multiple stitching operation, relative to the 'X' axis. As with all finishing operations, the 'X' axis is always relative to the portrait orientation of the document regardless of the orientation of the printed image. This enum is primarily applicable to corner stitching operations. | current | |||
| FinStitchingDirTypeTC TEXTUAL-CONVENTION Defines the direction, relative to the top sheet in the output subunit, that the stitching operation was performed. For a topDown(3) process, the staple will be clinched on the bottom of the stack. This parameter can be used to determine what order the pages of a booklet are to be printed such that the staple clinch will be on the inside of the resulting booklet. | current | |||
| FinStitchingTypeTC TEXTUAL-CONVENTION The defined stitching type enumerations. For the edgeStitch and stapleDual enums, the finReferenceEdge attribute is recommended to define the edge to which the operation applies. | current | |||
| FinWrappingTypeTC TEXTUAL-CONVENTION The defined wrapping device process enumerations. | current |