DLSW-MIB
- Registered at
- 0.01.3.6.1.2.1.46
- Last updated
- 1996-06-04 09:00
- Organization
- AIW DLSw MIB RIGLET and IETF DLSw MIB Working Group
- Namespace
- standard
- Source file
DLSW-MIB- Digest
sha256:d4fe56d598e26d7ef1e87641e050a99b9451f34a5ec521f9d36996b07ba446cf
Description
This MIB module contains objects to manage Data Link Switches.
Contact
David D. Chen IBM Corporation 800 Park, Highway 54 Research Triangle Park, NC 27709-9990 Tel: 1 919 254 6182 E-mail: dchen@vnet.ibm.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| SNA-SDLC-MIB | sdlcLSAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso, mib-2 |
| SNMPv2-TC | DisplayString, RowPointer, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
3 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLSW-MIB IANAifType-MIB IF-MIB SNA-SDLC-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DlcType TEXTUAL-CONVENTION Representing the type of DLC of an end station, if applicable. | current | |||
| DlswTCPAddress TEXTUAL-CONVENTION Represents the IP address of a DLSw which uses TCP as a transport protocol. | current | |||
| EndStationLocation TEXTUAL-CONVENTION Representing the location of an end station related to the managed DLSw node. | current | |||
| LFSize TEXTUAL-CONVENTION The largest size of the INFO field (including DLC header, not including any MAC-level or framing octets). 64 valid values as defined by the IEEE 802.1D Addendum are acceptable. | current | |||
| MacAddressNC TEXTUAL-CONVENTION Represents an 802 MAC address represented in non-canonical format. That is, the most significant bit will be transmitted first. If this information is not available, the value is a zero length string. | current | |||
| NBName TEXTUAL-CONVENTION Represents a single qualified NetBIOS name, which can include `don't care' and `wildcard' characters to represent a number of real NetBIOS names. If an individual character position in the qualified name contains a `?', the corresponding character position in a real NetBIOS name is a `don't care'. If the qualified name ends in `*', the remainder of a real NetBIOS name is a `don't care'. `*' is only considered a wildcard if it appears at the end of a name. | current | |||
| TAddress TEXTUAL-CONVENTION Denotes a transport service address. For dlswTCPDomain, a TAddress is 4 octets long, containing the IP-address in network-byte order. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| null OBJECT-IDENTITY | 0.0 | |||
| dlswMIB OBJECT-IDENTITY | 1.3.6.1.2.1.46.1 | |||
| dlswTraps OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.0 | |||
| dlswNode OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.1 | |||
| dlswNodeVersion OBJECT-TYPE This value identifies the particular version of the DLSw standard supported by this DLSw. The first octet is a hexadecimal value representing the DLSw standard Version number of this DLSw, and the second is a hexadecimal value representing the DLSw standard Release number. This information is reported in DLSw Capabilities Exchange. | 1.3.6.1.2.1.46.1.1.1 | OCTET STRING (SIZE(2)) | read-only | current |
| dlswNodeVendorID OBJECT-TYPE The value identifies the manufacturer's IEEE-assigned organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange. | 1.3.6.1.2.1.46.1.1.2 | OCTET STRING (SIZE(3)) | read-only | current |
| dlswNodeVersionString OBJECT-TYPE This string gives product-specific information about this DLSw (e.g., product name, code release and fix level). This flows in Capabilities Exchange messages. | 1.3.6.1.2.1.46.1.1.3 | DisplayString | read-only | current |
| dlswNodeStdPacingSupport OBJECT-TYPE Circuit pacing, as defined in the DLSw Standard, allows each of the two DLSw nodes on a circuit to control the amount of data the other is permitted to send to them. This object reflects the level of support the DLSw node has for this protocol. (1) means the node has no support for the standard circuit pacing flows; it may use RFC 1434+ methods only, or a proprietary flow control scheme. (2) means the node supports the standard scheme and can vary the window sizes it grants as a data receiver. (3) means the node supports the standard scheme but never varies its receive window size. | 1.3.6.1.2.1.46.1.1.4 | INTEGER {none(1), adaptiveRcvWindow(2), fixedRcvWindow(3)} | read-only | current |
| dlswNodeStatus OBJECT-TYPE The status of the DLSw part of the system. Changing the value from active to inactive causes DLSw to take the following actions - (1) it disconnects all circuits through all DLSw partners, (2) it disconnects all transport connections to all DLSw partners, (3) it disconnects all local DLC connections, and (4) it stops processing all DLC connection set-up traffic. Since these are destructive actions, the user should query the circuit and transport connection tables in advance to understand the effect this action will have. Changing the value from inactive to active causes DLSw to come up in its initial state, i.e., transport connections established and ready to bring up circuits. | 1.3.6.1.2.1.46.1.1.5 | INTEGER {active(1), inactive(2)} | read-write | current |
| dlswNodeUpTime OBJECT-TYPE The amount of time (in hundredths of a second) since the DLSw portion of the system was last re-initialized. That is, if dlswState is in the active state, the time the dlswState entered the active state. It will remain zero if dlswState is in the inactive state. | 1.3.6.1.2.1.46.1.1.6 | TimeTicks | read-only | current |
| dlswNodeVirtualSegmentLFSize OBJECT-TYPE The largest frame size (including DLC header and info field but not any MAC-level or framing octets) this DLSw can forward on any path through itself. This object can represent any box- level frame size forwarding restriction (e.g., from the use of fixed-size buffers). Some DLSw implementations will have no such restriction. This value will affect the LF size of circuits during circuit creation. The LF size of an existing circuit can be found in the RIF (Routing Information Field). | 1.3.6.1.2.1.46.1.1.7 | LFSize | read-write | current |
| dlswNodeResourceNBExclusivity OBJECT-TYPE The value of true indicates that the NetBIOS Names configured in dlswDirNBTable are the only ones accessible via this DLSw. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. It is up to the implementation exactly when to start the run-time capabilities exchange. | 1.3.6.1.2.1.46.1.1.8 | TruthValue | read-write | current |
| dlswNodeResourceMacExclusivity OBJECT-TYPE The value of true indicates that the MAC addresses configured in the dlswDirMacTable are the only ones accessible via this DLSw. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. It is up to the implementation exactly when to start the run-time capabilities exchange. | 1.3.6.1.2.1.46.1.1.9 | TruthValue | read-write | current |
| dlswTrapControl OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.1.10 | |||
| dlswTrapCntlTConnPartnerReject OBJECT-TYPE Indicates whether the DLSw is permitted to emit partner reject related traps. With the value of `enabled' the DLSw will emit all partner reject related traps. With the value of `disabled' the DLSw will not emit any partner reject related traps. With the value of `partial' the DLSw will only emits partner reject traps for CapEx reject. The changes take effect immediately. | 1.3.6.1.2.1.46.1.1.10.1 | INTEGER {enabled(1), disabled(2), partial(3)} | read-write | current |
| dlswTrapCntlTConnProtViolation OBJECT-TYPE Indicates whether the DLSw is permitted to generate protocol-violation traps on the events such as window size violation. The changes take effect immediately. | 1.3.6.1.2.1.46.1.1.10.2 | TruthValue | read-write | current |
| dlswTrapCntlTConn OBJECT-TYPE Indicates whether the DLSw is permitted to emit transport connection up and down traps. With the value of `enabled' the DLSw will emit traps when connections enter `connected' and `disconnected' states. With the value of `disabled' the DLSw will not emit traps when connections enter of `connected' and `disconnected' states. With the value of `partial' the DLSw will only emits transport connection down traps when the connection is closed with busy. The changes take effect immediately. | 1.3.6.1.2.1.46.1.1.10.3 | INTEGER {enabled(1), disabled(2), partial(3)} | read-write | current |
| dlswTrapCntlCircuit OBJECT-TYPE Indicates whether the DLSw is permitted to generate circuit up and down traps. With the value of `enabled' the DLSw will emit traps when circuits enter `connected' and `disconnected' states. With the value of `disabled' the DLSw will not emit traps when circuits enter of `connected' and `disconnected' states. With the value of `partial' the DLSw will emit traps only for those circuits that are initiated by this DLSw, e.g., originating the CUR_CS message. The changes take effect immediately. | 1.3.6.1.2.1.46.1.1.10.4 | INTEGER {enabled(1), disabled(2), partial(3)} | read-write | current |
| dlswTConn OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.2 | |||
| dlswTConnStat OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.2.1 | |||
| dlswTConnStatActiveConnections OBJECT-TYPE The number of transport connections that are not in `disconnected' state. | 1.3.6.1.2.1.46.1.2.1.1 | Gauge32 | read-only | current |
| dlswTConnStatCloseIdles OBJECT-TYPE The number of times transport connections in this node exited the connected state with zero active circuits on the transport connection. | 1.3.6.1.2.1.46.1.2.1.2 | Counter32 | read-only | current |
| dlswTConnStatCloseBusys OBJECT-TYPE The number of times transport connections in this node exited the connected state with some non-zero number of active circuits on the transport connection. Normally this means the transport connection failed unexpectedly. | 1.3.6.1.2.1.46.1.2.1.3 | Counter32 | read-only | current |
| dlswTConnConfigTable OBJECT-TYPE This table defines the transport connections that will be initiated or accepted by this DLSw. Structure of masks allows wildcard definition for a collection of transport connections by a conceptual row. For a specific transport connection, there may be multiple of conceptual rows match the transport address. The `best' match will the one to determine the characteristics of the transport connection. | 1.3.6.1.2.1.46.1.2.2 | not-accessible | current | |
| dlswTConnConfigEntry OBJECT-TYPE Each conceptual row defines a collection of transport connections. | 1.3.6.1.2.1.46.1.2.2.1 | not-accessible | current | |
| dlswTConnConfigIndex OBJECT-TYPE The index to the conceptual row of the table. Negative numbers are not allowed. There are objects defined that point to conceptual rows of this table with this index value. Zero is used to denote that no corresponding row exists. Index values are assigned by the agent, and should not be reused but should continue to increase in value. | 1.3.6.1.2.1.46.1.2.2.1.1 | INTEGER (0..2147483647) | not-accessible | current |
| dlswTConnConfigTDomain OBJECT-TYPE The object identifier which indicates the transport domain of this conceptual row. | 1.3.6.1.2.1.46.1.2.2.1.2 | OBJECT IDENTIFIER | read-create | current |
| dlswTConnConfigLocalTAddr OBJECT-TYPE The local transport address for this conceptual row of the transport connection definition. | 1.3.6.1.2.1.46.1.2.2.1.3 | TAddress | read-create | current |
| dlswTConnConfigRemoteTAddr OBJECT-TYPE The remote transport address. Together with dlswTConnConfigEntryType and dlswTConnConfigGroupDefinition, the object instance of this conceptual row identifies a collection of the transport connections that will be either initiated by this DLSw or initiated by a partner DLSw and accepted by this DLSw. | 1.3.6.1.2.1.46.1.2.2.1.4 | TAddress | read-create | current |
| dlswTConnConfigLastModifyTime OBJECT-TYPE The time (in hundredths of a second) since the value of any object in this conceptual row except for dlswTConnConfigOpens was last changed. This value may be compared to dlswTConnOperConnectTime to determine whether values in this row are completely valid for a transport connection created using this row definition. | 1.3.6.1.2.1.46.1.2.2.1.5 | TimeTicks | read-only | current |
| dlswTConnConfigEntryType OBJECT-TYPE The object instance signifies the type of entry in the associated conceptual row. The value of `individual' means that the entry applies to a specific partner DLSw node as identified by dlswTConnConfigRemoteTAddr and dlswTConnConfigTDomain. The value of `global' means that the entry applies to all partner DLSw nodes of the TDomain. The value of 'group' means that the entry applies to a specific set of DLSw nodes in the TDomain. Any group definitions are enterprise-specific and are pointed to by dlswTConnConfigGroupDefinition. In the cases of `global' and `group', the value in dlswTConnConfigRemoteTAddr may not have any significance. | 1.3.6.1.2.1.46.1.2.2.1.6 | INTEGER {individual(1), global(2), group(3)} | read-create | current |
| dlswTConnConfigGroupDefinition OBJECT-TYPE For conceptual rows of `individual' and `global' as specified in dlswTConnConfigEntryType, the instance of this object is `0.0'. For conceptual rows of `group', the instance points to the specific group definition. | 1.3.6.1.2.1.46.1.2.2.1.7 | RowPointer | read-create | current |
| dlswTConnConfigSetupType OBJECT-TYPE This value of the instance of a conceptual row identifies the behavior of the collection of transport connections that this conceptual row defines. The value of activePersistent, activeOnDemand and passive means this DLSw will accept any transport connections, initiated by partner DLSw nodes, which are defined by this conceptual row. The value of activePersistent means this DLSw will also initiate the transport connections of this conceptual row and retry periodically if necessary. The value of activeOnDemand means this DLSw will initiate a transport connection of this conceptual row, if there is a directory cache hits. The value of other is implementation specific. The value of exclude means that the specified node is not allowed to be a partner to this DLSw node. To take a certain conceptual row definition out of service, a value of notInService for dlswTConnConfigRowStatus should be used. | 1.3.6.1.2.1.46.1.2.2.1.8 | INTEGER {other(1), activePersistent(2), activeOnDemand(3), passive(4), excluded(5)} | read-create | current |
| dlswTConnConfigSapList OBJECT-TYPE The SAP list indicates which SAPs are advertised to the transport connection defined by this conceptual row. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in dlswIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 4, 8, and C. | 1.3.6.1.2.1.46.1.2.2.1.9 | OCTET STRING (SIZE(16)) | read-create | current |
| dlswTConnConfigAdvertiseMacNB OBJECT-TYPE The value of true indicates that any defined local MAC addresses and NetBIOS names will be advertised to a partner node via initial and (if supported) run-time capabilities exchange messages. The DLSw node should send the appropriate exclusivity control vector to accompany each list it sends, or to represent that the node is explicitly configured to have a null list. The value of false indicates that the DLSw node should not send a MAC address list or NetBIOS name list, and should also not send their corresponding exclusivity control vectors. | 1.3.6.1.2.1.46.1.2.2.1.10 | TruthValue | read-create | current |
| dlswTConnConfigInitCirRecvWndw OBJECT-TYPE The initial circuit receive pacing window size, in the unit of SSP messages, to be used for future transport connections activated using this table row. The managed node sends this value as its initial receive pacing window in its initial capabilities exchange message. Changing this value does not affect the initial circuit receive pacing window size of currently active transport connections. If the standard window pacing scheme is not supported, the value is zero. A larger receive window value may be appropriate for partners that are reachable only via physical paths that have longer network delays. | 1.3.6.1.2.1.46.1.2.2.1.11 | INTEGER (0..65535) | read-create | current |
| dlswTConnConfigOpens OBJECT-TYPE Number of times transport connections entered connected state according to the definition of this conceptual row. | 1.3.6.1.2.1.46.1.2.2.1.12 | Counter32 | read-only | current |
| dlswTConnConfigRowStatus OBJECT-TYPE This object is used by the manager to create or delete the row entry in the dlswTConnConfigTable following the RowStatus textual convention. The value of notInService will be used to take a conceptual row definition out of use. | 1.3.6.1.2.1.46.1.2.2.1.13 | RowStatus | read-create | current |
| dlswTConnOperTable OBJECT-TYPE A list of transport connections. It is optional but desirable for the agent to keep an entry for some period of time after the transport connection is disconnected. This allows the manager to capture additional useful information about the connection, in particular, statistical information and the cause of the disconnection. | 1.3.6.1.2.1.46.1.2.3 | not-accessible | current | |
| dlswTConnOperEntry OBJECT-TYPE | 1.3.6.1.2.1.46.1.2.3.1 | not-accessible | current | |
| dlswTConnOperTDomain OBJECT-TYPE The object identifier indicates the transport domain of this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.1 | OBJECT IDENTIFIER | not-accessible | current |
| dlswTConnOperLocalTAddr OBJECT-TYPE The local transport address for this transport connection. This value could be different from dlswTConnConfigLocalAddr, if the value of the latter were changed after this transport connection was established. | 1.3.6.1.2.1.46.1.2.3.1.2 | TAddress | read-only | current |
| dlswTConnOperRemoteTAddr OBJECT-TYPE The remote transport address of this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.3 | TAddress | not-accessible | current |
| dlswTConnOperEntryTime OBJECT-TYPE The amount of time (in hundredths of a second) since this transport connection conceptual row was created. | 1.3.6.1.2.1.46.1.2.3.1.4 | TimeTicks | read-only | current |
| dlswTConnOperConnectTime OBJECT-TYPE The amount of time (in hundredths of a second) since this transport connection last entered the 'connected' state. A value of zero means this transport connection has never been established. | 1.3.6.1.2.1.46.1.2.3.1.5 | TimeTicks | read-only | current |
| dlswTConnOperState OBJECT-TYPE The state of this transport connection. The transport connection enters `connecting' state when DLSw makes a connection request to the transport layer. Once initial Capabilities Exchange is sent, the transport connection enters enters `initCapExchange' state. When partner capabilities have been determined and the transport connection is ready for sending CanUReach (CUR) messages, it moves to the `connected' state. When DLSw is in the process of bringing down the connection, it is in the `disconnecting' state. When the transport layer indicates one of its connections is disconnected, the transport connection moves to the `disconnected' state. Whereas all of the values will be returned in response to a management protocol retrieval operation, only two values may be specified in a management protocol set operation: `quiescing' and `disconnecting'. Changing the value to `quiescing' prevents new circuits from being established, and will cause a transport disconnect when the last circuit on the connection goes away. Changing the value to `disconnecting' will force off all circuits immediately and bring the connection to `disconnected' state. | 1.3.6.1.2.1.46.1.2.3.1.6 | INTEGER {connecting(1), initCapExchange(2), connected(3), quiescing(4), disconnecting(5), disconnected(6)} | read-write | current |
| dlswTConnOperConfigIndex OBJECT-TYPE The value of dlswTConnConfigIndex of the dlswTConnConfigEntry that governs the configuration information used by this dlswTConnOperEntry. The manager can therefore normally examine both configured and operational information for this transport connection. This value is zero if the corresponding dlswTConnConfigEntry was deleted after the creation of this dlswTConnOperEntry. If some fields in the former were changed but the conceptual row was not deleted, some configuration information may not be valid for this operational transport connection. The manager can compare dlswTConnOperConnectTime and dlswTConnConfigLastModifyTime to determine if this condition exists. | 1.3.6.1.2.1.46.1.2.3.1.7 | INTEGER (0..2147483647) | read-only | current |
| dlswTConnOperFlowCntlMode OBJECT-TYPE The flow control mechanism in use on this transport connection. This value is undetermined (1) before the mode of flow control can be established on a new transport connection (i.e., after CapEx is sent but before Capex or other SSP control messages have been received). Pacing (2) indicates that the standard RFC 1795 pacing mechanism is in use. Other (3) may be either the RFC 1434+ xBusy mechanism operating to a back-level DLSw, or a vendor-specific flow control method. Whether it is xBusy or not can be inferred from dlswTConnOperPartnerVersion. | 1.3.6.1.2.1.46.1.2.3.1.8 | INTEGER {undetermined(1), pacing(2), other(3)} | read-only | current |
| dlswTConnOperPartnerVersion OBJECT-TYPE This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a dlswTConnOperState of `connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.9 | OCTET STRING (SIZE(0 | 2)) | read-only | current |
| dlswTConnOperPartnerVendorID OBJECT-TYPE This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.10 | OCTET STRING (SIZE(0 | 3)) | read-only | current |
| dlswTConnOperPartnerVersionStr OBJECT-TYPE This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string is vendor-specific. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, if one is never received, or if one is received but it does not contain a version string. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.11 | DisplayString (SIZE(0..253)) | read-only | current |
| dlswTConnOperPartnerInitPacingWndw OBJECT-TYPE The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified and granted by the first flow control indication the partner sends on each circuit. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A value of zero is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.12 | INTEGER (0..65535) | read-only | current |
| dlswTConnOperPartnerSapList OBJECT-TYPE The Supported SAP List received in the capabilities exchange message from the partner DLSw. This list has the same format described for dlswTConnConfigSapList. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.13 | OCTET STRING (SIZE(0 | 16)) | read-only | current |
| dlswTConnOperPartnerNBExcl OBJECT-TYPE The value of true signifies that the NetBIOS names received from this partner in the NetBIOS name list in its capabilities exchange message are the only NetBIOS names reachable by that partner. `False' indicates that other NetBIOS names may be reachable. `False' should be returned before a Capabilities Exchange message is received, if one is never received, or if one is received without a NB Name Exclusivity CV. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.14 | TruthValue | read-only | current |
| dlswTConnOperPartnerMacExcl OBJECT-TYPE The value of true signifies that the MAC addresses received from this partner in the MAC address list in its capabilities exchange message are the only MAC addresses reachable by that partner. `False' indicates that other MAC addresses may be reachable. `False' should be returned before a Capabilities Exchange message is received, if one is never received, or if one is received without a MAC Address Exclusivity CV. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.15 | TruthValue | read-only | current |
| dlswTConnOperPartnerNBInfo OBJECT-TYPE It is up to this DSLw whether to keep either none, some, or all of the NetBIOS name list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are stored as userConfigured remote entries in dlswDirNBTable. A value of (4), notApplicable, should be returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.16 | INTEGER {none(1), partial(2), complete(3), notApplicable(4)} | read-only | current |
| dlswTConnOperPartnerMacInfo OBJECT-TYPE It is up to this DLSw whether to keep either none, some, or all of the MAC address list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are stored as userConfigured remote entries in dlswDirMACTable. A value of (4), notApplicable, should be returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged. | 1.3.6.1.2.1.46.1.2.3.1.17 | INTEGER {none(1), partial(2), complete(3), notApplicable(4)} | read-only | current |
| dlswTConnOperDiscTime OBJECT-TYPE The amount of time (in hundredths of a second) since the dlswTConnOperState last entered `disconnected' state. | 1.3.6.1.2.1.46.1.2.3.1.18 | TimeTicks | read-only | current |
| dlswTConnOperDiscReason OBJECT-TYPE This object signifies the reason that either prevented the transport connection from entering the connected state, or caused the transport connection to enter the disconnected state. | 1.3.6.1.2.1.46.1.2.3.1.19 | INTEGER {other(1), capExFailed(2), transportLayerDisc(3), operatorCommand(4), lastCircuitDiscd(5), protocolError(6)} | read-only | current |
| dlswTConnOperDiscActiveCir OBJECT-TYPE The number of circuits active (not in DISCONNECTED state) at the time the transport connection was last disconnected. This value is zero if the transport connection has never been connected. | 1.3.6.1.2.1.46.1.2.3.1.20 | INTEGER (0..2147483647) | read-only | current |
| dlswTConnOperInDataPkts OBJECT-TYPE The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.21 | Counter32 | read-only | current |
| dlswTConnOperOutDataPkts OBJECT-TYPE The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.22 | Counter32 | read-only | current |
| dlswTConnOperInDataOctets OBJECT-TYPE The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is counted starting with the first octet following the SSP message header. | 1.3.6.1.2.1.46.1.2.3.1.23 | Counter32 | read-only | current |
| dlswTConnOperOutDataOctets OBJECT-TYPE The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. Each message is counted starting with the first octet following the SSP message header. | 1.3.6.1.2.1.46.1.2.3.1.24 | Counter32 | read-only | current |
| dlswTConnOperInCntlPkts OBJECT-TYPE The number of Switch-to-Switch Protocol (SSP) messages received on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME. | 1.3.6.1.2.1.46.1.2.3.1.25 | Counter32 | read-only | current |
| dlswTConnOperOutCntlPkts OBJECT-TYPE The number of Switch-to-Switch Protocol (SSP) messages of transmitted on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME. | 1.3.6.1.2.1.46.1.2.3.1.26 | Counter32 | read-only | current |
| dlswTConnOperCURexSents OBJECT-TYPE The number of CanUReach_ex messages sent on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.27 | Counter32 | read-only | current |
| dlswTConnOperICRexRcvds OBJECT-TYPE The number of ICanReach_ex messages received on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.28 | Counter32 | read-only | current |
| dlswTConnOperCURexRcvds OBJECT-TYPE The number of CanUReach_ex messages received on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.29 | Counter32 | read-only | current |
| dlswTConnOperICRexSents OBJECT-TYPE The number of ICanReach_ex messages sent on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.30 | Counter32 | read-only | current |
| dlswTConnOperNQexSents OBJECT-TYPE The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.31 | Counter32 | read-only | current |
| dlswTConnOperNRexRcvds OBJECT-TYPE The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer) messages received on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.32 | Counter32 | read-only | current |
| dlswTConnOperNQexRcvds OBJECT-TYPE The number of NETBIOS_NQ_ex messages received on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.33 | Counter32 | read-only | current |
| dlswTConnOperNRexSents OBJECT-TYPE The number of NETBIOS_NR_ex messages sent on this transport connection. | 1.3.6.1.2.1.46.1.2.3.1.34 | Counter32 | read-only | current |
| dlswTConnOperCirCreates OBJECT-TYPE The number of times that circuits entered `circuit_established' state (not counting transitions from `circuit_restart'). | 1.3.6.1.2.1.46.1.2.3.1.35 | Counter32 | read-only | current |
| dlswTConnOperCircuits OBJECT-TYPE The number of currently active circuits on this transport connection, where `active' means not in `disconnected' state. | 1.3.6.1.2.1.46.1.2.3.1.36 | Gauge32 | read-only | current |
| dlswTConnSpecific OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.2.4 | |||
| dlswTConnTcp OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.2.4.1 | |||
| dlswTConnTcpConfigTable OBJECT-TYPE This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain. | 1.3.6.1.2.1.46.1.2.4.1.1 | not-accessible | current | |
| dlswTConnTcpConfigEntry OBJECT-TYPE Each conceptual row defines parameters that are specific to dlswTCPDomain transport connections. | 1.3.6.1.2.1.46.1.2.4.1.1.1 | not-accessible | current | |
| dlswTConnTcpConfigKeepAliveInt OBJECT-TYPE The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol. Changes take effect only for new TCP connections. | 1.3.6.1.2.1.46.1.2.4.1.1.1.1 | INTEGER (0..1800) | read-create | current |
| dlswTConnTcpConfigTcpConnections OBJECT-TYPE This is our preferred number of TCP connections within a TCP transport connection. The actual number used is negotiated at capabilities exchange time. Changes take effect only for new transport connections. | 1.3.6.1.2.1.46.1.2.4.1.1.1.2 | INTEGER (1..16) | read-create | current |
| dlswTConnTcpConfigMaxSegmentSize OBJECT-TYPE This is the number of bytes that this node is willing to receive over the read TCP connection(s). Changes take effect for new transport connections. | 1.3.6.1.2.1.46.1.2.4.1.1.1.3 | INTEGER (0..65535) | read-create | current |
| dlswTConnTcpOperTable OBJECT-TYPE A list of TCP transport connections. It is optional but desirable for the agent to keep an entry for some period of time after the transport connection is disconnected. This allows the manager to capture additional useful information about the connection, in particular, statistical information and the cause of the disconnection. | 1.3.6.1.2.1.46.1.2.4.1.2 | not-accessible | current | |
| dlswTConnTcpOperEntry OBJECT-TYPE | 1.3.6.1.2.1.46.1.2.4.1.2.1 | not-accessible | current | |
| dlswTConnTcpOperKeepAliveInt OBJECT-TYPE The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol is operating. | 1.3.6.1.2.1.46.1.2.4.1.2.1.1 | INTEGER (0..1800) | read-only | current |
| dlswTConnTcpOperPrefTcpConnections OBJECT-TYPE This is the number of TCP connections preferred by this DLSw partner, as received in its capabilities exchange message. | 1.3.6.1.2.1.46.1.2.4.1.2.1.2 | INTEGER (1..16) | read-only | current |
| dlswTConnTcpOperTcpConnections OBJECT-TYPE This is the actual current number of TCP connections within this transport connection. | 1.3.6.1.2.1.46.1.2.4.1.2.1.3 | INTEGER (1..16) | read-only | current |
| dlswInterface OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.3 | |||
| dlswIfTable OBJECT-TYPE The list of interfaces on which DLSw is active. | 1.3.6.1.2.1.46.1.3.1 | not-accessible | current | |
| dlswIfEntry OBJECT-TYPE | 1.3.6.1.2.1.46.1.3.1.1 | not-accessible | current | |
| dlswIfRowStatus OBJECT-TYPE This object is used by the manager to create or delete the row entry in the dlswIfTable following the RowStatus textual convention. | 1.3.6.1.2.1.46.1.3.1.1.1 | RowStatus | read-create | current |
| dlswIfVirtualSegment OBJECT-TYPE The segment number that uniquely identifies the virtual segment to which this DLSw interface is connected. Current source routing protocols limit this value to the range 0 - 4095. (The value 0 is used by some management applications for special test cases.) A value of 65535 signifies that no virtual segment is assigned to this interface. For instance, in a non-source routing environment, segment number assignment is not required. | 1.3.6.1.2.1.46.1.3.1.1.2 | INTEGER (0..4095 | 65535) | read-create | current |
| dlswIfSapList OBJECT-TYPE The SAP list indicates which SAPs are allowed to be data link switched through this interface. This list has the same format described for dlswTConnConfigSapList. When changes to this object take effect is implementation- specific. Turning off a particular SAP can destroy active circuits that are using that SAP. An agent implementation may reject such changes until there are no active circuits if it so chooses. In this case, it is up to the manager to close the circuits first, using dlswCircuitState. The DEFVAL below indicates support for SAPs 0, 4, 8, and C. | 1.3.6.1.2.1.46.1.3.1.1.3 | OCTET STRING (SIZE(16)) | read-create | current |
| dlswDirectory OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.4 | |||
| dlswDirStat OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.4.1 | |||
| dlswDirMacEntries OBJECT-TYPE The current total number of entries in the dlswDirMacTable. | 1.3.6.1.2.1.46.1.4.1.1 | Gauge32 | read-only | current |
| dlswDirMacCacheHits OBJECT-TYPE The number of times a cache search for a particular MAC address resulted in success. | 1.3.6.1.2.1.46.1.4.1.2 | Counter32 | read-only | current |
| dlswDirMacCacheMisses OBJECT-TYPE The number of times a cache search for a particular MAC address resulted in failure. | 1.3.6.1.2.1.46.1.4.1.3 | Counter32 | read-only | current |
| dlswDirMacCacheNextIndex OBJECT-TYPE The next value of dlswDirMacIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in dlswDirMacTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows. | 1.3.6.1.2.1.46.1.4.1.4 | INTEGER (0..2147483647) | read-only | current |
| dlswDirNBEntries OBJECT-TYPE The current total number of entries in the dlswDirNBTable. | 1.3.6.1.2.1.46.1.4.1.5 | Gauge32 | read-only | current |
| dlswDirNBCacheHits OBJECT-TYPE The number of times a cache search for a particular NetBIOS name resulted in success. | 1.3.6.1.2.1.46.1.4.1.6 | Counter32 | read-only | current |
| dlswDirNBCacheMisses OBJECT-TYPE The number of times a cache search for a particular NetBIOS name resulted in failure. | 1.3.6.1.2.1.46.1.4.1.7 | Counter32 | read-only | current |
| dlswDirNBCacheNextIndex OBJECT-TYPE The next value of dlswDirNBIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in dlswDirNBTable. This makes it possible for the agent to control the index space for the NetBIOS name cache, yet allows the manager to administratively create new rows. | 1.3.6.1.2.1.46.1.4.1.8 | INTEGER (0..2147483647) | read-only | current |
| dlswDirCache OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.4.2 | |||
| dlswDirMacTable OBJECT-TYPE This table contains locations of MAC addresses. They could be either verified or not verified, local or remote, and configured locally or learned from either Capabilities Exchange messages or directory searches. | 1.3.6.1.2.1.46.1.4.2.1 | not-accessible | current | |
| dlswDirMacEntry OBJECT-TYPE Indexed by dlswDirMacIndex. | 1.3.6.1.2.1.46.1.4.2.1.1 | not-accessible | current | |
| dlswDirMacIndex OBJECT-TYPE Uniquely identifies a conceptual row of this table. | 1.3.6.1.2.1.46.1.4.2.1.1.1 | INTEGER (0..2147483647) | not-accessible | current |
| dlswDirMacMac OBJECT-TYPE The MAC address, together with the dlswDirMacMask, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes. | 1.3.6.1.2.1.46.1.4.2.1.1.2 | MacAddressNC | read-create | current |
| dlswDirMacMask OBJECT-TYPE The MAC address mask, together with the dlswDirMacMac, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes. | 1.3.6.1.2.1.46.1.4.2.1.1.3 | MacAddressNC | read-create | current |
| dlswDirMacEntryType OBJECT-TYPE The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line or equivalent methods; (2) learned from the partner DLSw Capabilities Exchange messages; and (3) dynamic, e.g., learned from ICanReach messages, or LAN explorer frames. Since only individual MAC addresses can be dynamically learned, dynamic entries will all have a mask of all FFs. The public versus private distinction for user- configured resources applies only to local resources (UC remote resources are private), and indicates whether that resource should be advertised in capabilities exchange messages sent by this node. | 1.3.6.1.2.1.46.1.4.2.1.1.4 | INTEGER {other(1), userConfiguredPublic(2), userConfiguredPrivate(3), partnerCapExMsg(4), dynamic(5)} | read-create | current |
| dlswDirMacLocationType OBJECT-TYPE The location of the resource (or a collection of resources using a mask) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a partner DLSw node (or a set of partner DLSw nodes). | 1.3.6.1.2.1.46.1.4.2.1.1.5 | INTEGER {other(1), local(2), remote(3)} | read-create | current |
| dlswDirMacLocation OBJECT-TYPE Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the MAC address (or the collection of MAC addresses.) | 1.3.6.1.2.1.46.1.4.2.1.1.6 | RowPointer | read-create | current |
| dlswDirMacStatus OBJECT-TYPE This object specifies whether DLSw currently believes the MAC address to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a repeat of the search). | 1.3.6.1.2.1.46.1.4.2.1.1.7 | INTEGER {unknown(1), reachable(2), notReachable(3)} | read-create | current |
| dlswDirMacLFSize OBJECT-TYPE The largest size of the MAC INFO field (LLC header and data) that a circuit to the MAC address can carry through this path. | 1.3.6.1.2.1.46.1.4.2.1.1.8 | LFSize | read-create | current |
| dlswDirMacRowStatus OBJECT-TYPE This object is used by the manager to create or delete the row entry in the dlswDirMacTable following the RowStatus textual convention. | 1.3.6.1.2.1.46.1.4.2.1.1.9 | RowStatus | read-create | current |
| dlswDirNBTable OBJECT-TYPE This table contains locations of NetBIOS names. They could be either verified or not verified, local or remote, and configured locally or learned from either Capabilities Exchange messages or directory searches. | 1.3.6.1.2.1.46.1.4.2.2 | not-accessible | current | |
| dlswDirNBEntry OBJECT-TYPE Indexed by dlswDirNBIndex. | 1.3.6.1.2.1.46.1.4.2.2.1 | not-accessible | current | |
| dlswDirNBIndex OBJECT-TYPE Uniquely identifies a conceptual row of this table. | 1.3.6.1.2.1.46.1.4.2.2.1.1 | INTEGER (0..2147483647) | not-accessible | current |
| dlswDirNBName OBJECT-TYPE The NetBIOS name (including `any char' and `wildcard' characters) specifies a set of NetBIOS names that are defined or discovered through an interface or partner DLSw nodes. | 1.3.6.1.2.1.46.1.4.2.2.1.2 | NBName | read-create | current |
| dlswDirNBNameType OBJECT-TYPE Whether dlswDirNBName represents an (or a set of) individual or group NetBIOS name(s). | 1.3.6.1.2.1.46.1.4.2.2.1.3 | INTEGER {unknown(1), individual(2), group(3)} | read-create | current |
| dlswDirNBEntryType OBJECT-TYPE The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line, or equivalent methods; (2) learned from the partner DLSw Capabilities Exchange messages; and (3) dynamic, e.g., learned from ICanReach messages, or test frames. Since only actual NetBIOS names can be dynamically learned, dynamic entries will not contain any char or wildcard characters. The public versus private distinction for user- configured resources applies only to local resources (UC remote resources are private), and indicates whether that resource should be advertised in capabilities exchange messages sent by this node. | 1.3.6.1.2.1.46.1.4.2.2.1.4 | INTEGER {other(1), userConfiguredPublic(2), userConfiguredPrivate(3), partnerCapExMsg(4), dynamic(5)} | read-create | current |
| dlswDirNBLocationType OBJECT-TYPE The location of the resource (or a collection of resources using any char/wildcard characters) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a a partner DLSw node (or a set of partner DLSw nodes). | 1.3.6.1.2.1.46.1.4.2.2.1.5 | INTEGER {other(1), local(2), remote(3)} | read-create | current |
| dlswDirNBLocation OBJECT-TYPE Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the NetBIOS name or the set of NetBIOS names. | 1.3.6.1.2.1.46.1.4.2.2.1.6 | RowPointer | read-create | current |
| dlswDirNBStatus OBJECT-TYPE This object specifies whether DLSw currently believes the NetBIOS name to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a repeat of the search). | 1.3.6.1.2.1.46.1.4.2.2.1.7 | INTEGER {unknown(1), reachable(2), notReachable(3)} | read-create | current |
| dlswDirNBLFSize OBJECT-TYPE The largest size of the MAC INFO field (LLC header and data) that a circuit to the NB name can carry through this path. | 1.3.6.1.2.1.46.1.4.2.2.1.8 | LFSize | read-create | current |
| dlswDirNBRowStatus OBJECT-TYPE This object is used by manager to create or delete the row entry in the dlswDirNBTable following the RowStatus textual convention. | 1.3.6.1.2.1.46.1.4.2.2.1.9 | RowStatus | read-create | current |
| dlswDirLocate OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.4.3 | |||
| dlswDirLocateMacTable OBJECT-TYPE This table is used to retrieve all entries in the dlswDirMacTable that match a given MAC address, in the order of the best matched first, the second best matched second, and so on, till no more entries match the given MAC address. | 1.3.6.1.2.1.46.1.4.3.1 | not-accessible | current | |
| dlswDirLocateMacEntry OBJECT-TYPE Indexed by dlswDirLocateMacMac and dlswDirLocateMacMatch. The first object is the MAC address of interest, and the second object is the order in the list of all entries that match the MAC address. | 1.3.6.1.2.1.46.1.4.3.1.1 | not-accessible | current | |
| dlswDirLocateMacMac OBJECT-TYPE The MAC address to be located. | 1.3.6.1.2.1.46.1.4.3.1.1.1 | MacAddressNC | not-accessible | current |
| dlswDirLocateMacMatch OBJECT-TYPE The order of the entries of dlswDirMacTable that match dlswDirLocateMacMac. A value of one represents the entry that best matches the MAC address. A value of two represents the second best matched entry, and so on. | 1.3.6.1.2.1.46.1.4.3.1.1.2 | INTEGER (1..255) | not-accessible | current |
| dlswDirLocateMacLocation OBJECT-TYPE Points to the dlswDirMacEntry. | 1.3.6.1.2.1.46.1.4.3.1.1.3 | RowPointer | read-only | current |
| dlswDirLocateNBTable OBJECT-TYPE This table is used to retrieve all entries in the dlswDirNBTable that match a given NetBIOS name, in the order of the best matched first, the second best matched second, and so on, till no more entries match the given NetBIOS name. | 1.3.6.1.2.1.46.1.4.3.2 | not-accessible | current | |
| dlswDirLocateNBEntry OBJECT-TYPE Indexed by dlswDirLocateNBName and dlswDirLocateNBMatch. The first object is the NetBIOS name of interest, and the second object is the order in the list of all entries that match the NetBIOS name. | 1.3.6.1.2.1.46.1.4.3.2.1 | not-accessible | current | |
| dlswDirLocateNBName OBJECT-TYPE The NetBIOS name to be located (no any char or wildcards). | 1.3.6.1.2.1.46.1.4.3.2.1.1 | NBName | not-accessible | current |
| dlswDirLocateNBMatch OBJECT-TYPE The order of the entries of dlswDirNBTable that match dlswDirLocateNBName. A value of one represents the entry that best matches the NetBIOS name. A value of two represents the second best matched entry, and so on. | 1.3.6.1.2.1.46.1.4.3.2.1.2 | INTEGER (1..255) | not-accessible | current |
| dlswDirLocateNBLocation OBJECT-TYPE Points to the dlswDirNBEntry. | 1.3.6.1.2.1.46.1.4.3.2.1.3 | RowPointer | read-only | current |
| dlswCircuit OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.5 | |||
| dlswCircuitStat OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.5.1 | |||
| dlswCircuitStatActives OBJECT-TYPE The current number of circuits in dlswCircuitTable that are not in the disconnected state. | 1.3.6.1.2.1.46.1.5.1.1 | Gauge32 | read-only | current |
| dlswCircuitStatCreates OBJECT-TYPE The total number of entries ever added to dlswCircuitTable, or reactivated upon exiting `disconnected' state. | 1.3.6.1.2.1.46.1.5.1.2 | Counter32 | read-only | current |
| dlswCircuitTable OBJECT-TYPE This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row associated with each data link. Thus, for circuits without an intervening transport connection, there are two conceptual rows for each circuit. The table consists of the circuits being established, established, and as an implementation option, circuits that have been disconnected. For circuits carried over transport connections, an entry is created after the CUR_cs was sent or received. For circuits between two locally attached devices, or internal virtual MAC addresses, an entry is created when the equivalent of CUR_cs sent/received status is reached. End station 1 (S1) and End station 2 (S2) are used to represent the two end stations of the circuit. S1 is always an end station which is locally attached. S2 may be locally attached or remote. If it is locally attached, the circuit will be represented by two rows indexed by (A, B) and (B, A) where A & B are the relevant MACs/SAPs. The table may be used to store the causes of disconnection of circuits. It is recommended that the oldest disconnected circuit entry be removed from this table when the memory space of disconnected circuits is needed. | 1.3.6.1.2.1.46.1.5.2 | not-accessible | current | |
| dlswCircuitEntry OBJECT-TYPE | 1.3.6.1.2.1.46.1.5.2.1 | not-accessible | current | |
| dlswCircuitS1Mac OBJECT-TYPE The MAC Address of End Station 1 (S1) used for this circuit. | 1.3.6.1.2.1.46.1.5.2.1.1 | MacAddressNC | not-accessible | current |
| dlswCircuitS1Sap OBJECT-TYPE The SAP at End Station 1 (S1) used for this circuit. | 1.3.6.1.2.1.46.1.5.2.1.2 | OCTET STRING (SIZE(1)) | not-accessible | current |
| dlswCircuitS1IfIndex OBJECT-TYPE The ifEntry index of the local interface through which S1 can be reached. | 1.3.6.1.2.1.46.1.5.2.1.3 | INTEGER (0..2147483647) | read-only | current |
| dlswCircuitS1DlcType OBJECT-TYPE The DLC protocol in use between the DLSw node and S1. | 1.3.6.1.2.1.46.1.5.2.1.4 | DlcType | read-only | current |
| dlswCircuitS1RouteInfo OBJECT-TYPE If source-route bridging is in use between the DLSw node and S1, this is the routing information field describing the path between the two devices. Otherwise the value will be an OCTET STRING of zero length. | 1.3.6.1.2.1.46.1.5.2.1.5 | OCTET STRING (SIZE(0..30)) | read-only | current |
| dlswCircuitS1CircuitId OBJECT-TYPE The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length. | 1.3.6.1.2.1.46.1.5.2.1.6 | OCTET STRING (SIZE(0 | 8)) | read-only | current |
| dlswCircuitS1Dlc OBJECT-TYPE Points to a conceptual row of the underlying DLC MIB, which could either be the standard MIBs (e.g., the SDLC), or an enterprise-specific DLC MIB. | 1.3.6.1.2.1.46.1.5.2.1.7 | RowPointer | read-only | current |
| dlswCircuitS2Mac OBJECT-TYPE The MAC Address of End Station 2 (S2) used for this circuit. | 1.3.6.1.2.1.46.1.5.2.1.8 | MacAddressNC | not-accessible | current |
| dlswCircuitS2Sap OBJECT-TYPE The SAP at End Station 2 (S2) used for this circuit. | 1.3.6.1.2.1.46.1.5.2.1.9 | OCTET STRING (SIZE(1)) | not-accessible | current |
| dlswCircuitS2Location OBJECT-TYPE The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively. | 1.3.6.1.2.1.46.1.5.2.1.10 | EndStationLocation | read-only | current |
| dlswCircuitS2TDomain OBJECT-TYPE If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running over. Otherwise, the value is 0.0. | 1.3.6.1.2.1.46.1.5.2.1.11 | OBJECT IDENTIFIER | read-only | current |
| dlswCircuitS2TAddress OBJECT-TYPE If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length. | 1.3.6.1.2.1.46.1.5.2.1.12 | TAddress | read-only | current |
| dlswCircuitS2CircuitId OBJECT-TYPE The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length. | 1.3.6.1.2.1.46.1.5.2.1.13 | OCTET STRING (SIZE(0 | 8)) | read-only | current |
| dlswCircuitOrigin OBJECT-TYPE This object specifies which of the two end stations initiated the establishment of this circuit. | 1.3.6.1.2.1.46.1.5.2.1.14 | INTEGER {s1(1), s2(2)} | read-only | current |
| dlswCircuitEntryTime OBJECT-TYPE The amount of time (in hundredths of a second) since this circuit table conceptual row was created. | 1.3.6.1.2.1.46.1.5.2.1.15 | TimeTicks | read-only | current |
| dlswCircuitStateTime OBJECT-TYPE The amount of time (in hundredths of a second) since this circuit entered the current state. | 1.3.6.1.2.1.46.1.5.2.1.16 | TimeTicks | read-only | current |
| dlswCircuitState OBJECT-TYPE The current state of this circuit. The agent, implementation specific, may choose to keep entries for some period of time after circuit disconnect, so the manager can gather the time and cause of disconnection. While all of the specified values may be returned from a GET operation, the only SETable value is `disconnectPending'. When this value is set, DLSw should perform the appropriate action given its previous state (e.g., send HALT_DL if the state was `connected') to bring the circuit down to the `disconnected' state. Both the partner DLSw and local end station(s) should be notified as appropriate. This MIB provides no facility to re-establish a disconnected circuit, because in DLSw this should be an end station-driven function. | 1.3.6.1.2.1.46.1.5.2.1.17 | INTEGER {disconnected(1), circuitStart(2), resolvePending(3), circuitPending(4), circuitEstablished(5), connectPending(6), contactPending(7), connected(8), disconnectPending(9), haltPending(10), haltPendingNoack(11), circuitRestart(12), restartPending(13)} | read-write | current |
| dlswCircuitPriority OBJECT-TYPE The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw node does not support DLSw circuit priority, the value `unsupported' should be returned. | 1.3.6.1.2.1.46.1.5.2.1.18 | INTEGER {unsupported(1), low(2), medium(3), high(4), highest(5)} | read-only | current |
| dlswCircuitFCSendGrantedUnits OBJECT-TYPE The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control indication from the partner DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.19 | INTEGER (0..65535) | read-only | current |
| dlswCircuitFCSendCurrentWndw OBJECT-TYPE The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is authorized to send, if it were to receive a flow control indication with the bits specifying `repeat window'. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.20 | INTEGER (0..65535) | read-only | current |
| dlswCircuitFCRecvGrantedUnits OBJECT-TYPE The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for an additional flow control indication from this DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.21 | INTEGER (0..65535) | read-only | current |
| dlswCircuitFCRecvCurrentWndw OBJECT-TYPE The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be authorizing its DLSw partner to send, if this DLSw were to send a flow control indication with the bits specifying `repeat window'. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.22 | INTEGER (0..65535) | read-only | current |
| dlswCircuitFCLargestRecvGranted OBJECT-TYPE The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any time, but the largest window size as represented by FCIND operator bits. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.23 | Gauge32 | read-only | current |
| dlswCircuitFCLargestSendGranted OBJECT-TYPE The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.24 | Gauge32 | read-only | current |
| dlswCircuitFCHalveWndwSents OBJECT-TYPE The number of Halve Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.25 | Counter32 | read-only | current |
| dlswCircuitFCResetOpSents OBJECT-TYPE The number of Reset Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.26 | Counter32 | read-only | current |
| dlswCircuitFCHalveWndwRcvds OBJECT-TYPE The number of Halve Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.27 | Counter32 | read-only | current |
| dlswCircuitFCResetOpRcvds OBJECT-TYPE The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol. | 1.3.6.1.2.1.46.1.5.2.1.28 | Counter32 | read-only | current |
| dlswCircuitDiscReasonLocal OBJECT-TYPE The reason why this circuit was last disconnected, as seen by this DLSw node. This object is present only if the agent keeps circuit table entries around for some period after circuit disconnect. | 1.3.6.1.2.1.46.1.5.2.1.29 | INTEGER {endStationDiscRcvd(1), endStationDlcError(2), protocolError(3), operatorCommand(4), haltDlRcvd(5), haltDlNoAckRcvd(6), transportConnClosed(7)} | read-only | current |
| dlswCircuitDiscReasonRemote OBJECT-TYPE The generic reason code why this circuit was last disconnected, as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK. If the partner does not send a reason code in these messages, or the DLSw implementation does not report receiving one, the value `unknown' is returned. This object is present only if the agent keeps circuit table entries around for some period after circuit disconnect. | 1.3.6.1.2.1.46.1.5.2.1.30 | INTEGER {unknown(1), endStationDiscRcvd(2), endStationDlcError(3), protocolError(4), operatorCommand(5)} | read-only | current |
| dlswCircuitDiscReasonRemoteData OBJECT-TYPE Implementation-specific data reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK, to help specify how and why this circuit was last disconnected. If the partner does not send this data in these messages, or the DLSw implementation does not report receiving it, a string of zero length is returned. This object is present only if the agent keeps circuit table entries around for some period after circuit disconnect. | 1.3.6.1.2.1.46.1.5.2.1.31 | OCTET STRING (SIZE(0 | 4)) | read-only | current |
| dlswSdlc OBJECT-IDENTITY | 1.3.6.1.2.1.46.1.6 | |||
| dlswSdlcLsEntries OBJECT-TYPE The number of entries in dlswSdlcLsTable. | 1.3.6.1.2.1.46.1.6.1 | Gauge32 | read-only | current |
| dlswSdlcLsTable OBJECT-TYPE The table defines the virtual MAC addresses for those SDLC link stations that participate in data link switching. | 1.3.6.1.2.1.46.1.6.2 | not-accessible | current | |
| dlswSdlcLsEntry OBJECT-TYPE The index of this table is the ifIndex value for the SDLC port which owns this link station and the poll address of the particular SDLC link station. | 1.3.6.1.2.1.46.1.6.2.1 | not-accessible | current | |
| dlswSdlcLsLocalMac OBJECT-TYPE The virtual MAC address used to represent the SDLC-attached link station to the rest of the DLSw network. | 1.3.6.1.2.1.46.1.6.2.1.1 | MacAddressNC | read-create | current |
| dlswSdlcLsLocalSap OBJECT-TYPE The SAP used to represent this link station. | 1.3.6.1.2.1.46.1.6.2.1.2 | OCTET STRING (SIZE(1)) | read-create | current |
| dlswSdlcLsLocalIdBlock OBJECT-TYPE The block number is the first three digits of the node_id, if available. These 3 hexadecimal digits identify the product. | 1.3.6.1.2.1.46.1.6.2.1.3 | DisplayString (SIZE(0 | 3)) | read-create | current |
| dlswSdlcLsLocalIdNum OBJECT-TYPE The ID number is the last 5 digits of the node_id, if available. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is included in SNA XIDs. | 1.3.6.1.2.1.46.1.6.2.1.4 | DisplayString (SIZE(0 | 5)) | read-create | current |
| dlswSdlcLsRemoteMac OBJECT-TYPE The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned. | 1.3.6.1.2.1.46.1.6.2.1.5 | MacAddressNC | read-create | current |
| dlswSdlcLsRemoteSap OBJECT-TYPE The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned. | 1.3.6.1.2.1.46.1.6.2.1.6 | OCTET STRING (SIZE(0 | 1)) | read-create | current |
| dlswSdlcLsRowStatus OBJECT-TYPE This object is used by the manager to create or delete the row entry in the dlswSdlcLsTable following the RowStatus textual convention. | 1.3.6.1.2.1.46.1.6.2.1.7 | RowStatus | read-create | current |
| dlswDomains OBJECT-IDENTITY | 1.3.6.1.2.1.46.2 | |||
| dlswTCPDomain OBJECT-IDENTITY | 1.3.6.1.2.1.46.2.1 | |||
| dlswConformance OBJECT-IDENTITY | 1.3.6.1.2.1.46.3 | |||
| dlswCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.46.3.1 | |||
| dlswGroups OBJECT-IDENTITY | 1.3.6.1.2.1.46.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| dlswTrapTConnPartnerReject NOTIFICATION-TYPE This trap is sent each time a transport connection is rejected by a partner DLSw during Capabilities Exchanges. The emission of this trap is controlled by dlswTrapCntlTConnPartnerReject. | 1.3.6.1.2.1.46.1.0.1 | current |
| dlswTrapTConnProtViolation NOTIFICATION-TYPE This trap is sent each time a protocol violation is detected for a transport connection. The emission of this trap is controlled by dlswTrapCntlTConnProtViolation. | 1.3.6.1.2.1.46.1.0.2 | current |
| dlswTrapTConnUp NOTIFICATION-TYPE This trap is sent each time a transport connection enters `connected' state. The emission of this trap is controlled by dlswTrapCntlTConn. | 1.3.6.1.2.1.46.1.0.3 | current |
| dlswTrapTConnDown NOTIFICATION-TYPE This trap is sent each time a transport connection enters `disconnected' state. The emission of this trap is controlled by dlswTrapCntlTConn. | 1.3.6.1.2.1.46.1.0.4 | current |
| dlswTrapCircuitUp NOTIFICATION-TYPE This trap is sent each time a circuit enters `connected' state. The emission of this trap is controlled by dlswTrapCntlCircuit. | 1.3.6.1.2.1.46.1.0.5 | current |
| dlswTrapCircuitDown NOTIFICATION-TYPE This trap is sent each time a circuit enters `disconnected' state. The emission of this trap is controlled by dlswTrapCntlCircuit. | 1.3.6.1.2.1.46.1.0.6 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| dlswCoreCompliance MODULE-COMPLIANCE The core compliance statement for all DLSw nodes. | 1.3.6.1.2.1.46.3.1.1 | current |
| dlswTConnTcpCompliance MODULE-COMPLIANCE Compliance for DLSw nodes that use TCP as a transport connection protocol. | 1.3.6.1.2.1.46.3.1.2 | current |
| dlswDirCompliance MODULE-COMPLIANCE Compliance for DLSw nodes that provide a directory function. | 1.3.6.1.2.1.46.3.1.3 | current |
| dlswDirLocateCompliance MODULE-COMPLIANCE Compliance for DLSw nodes that provide an ordered list of directory entries for a given resource. | 1.3.6.1.2.1.46.3.1.4 | current |
| dlswSdlcCompliance MODULE-COMPLIANCE Compliance for DLSw nodes that support SDLC. | 1.3.6.1.2.1.46.3.1.5 | current |
| dlswNodeGroup OBJECT-GROUP Conformance group for DLSw node general information. | 1.3.6.1.2.1.46.3.2.1 | current |
| dlswNodeNBGroup OBJECT-GROUP Conformance group for DLSw node general information specifically for nodes that support NetBIOS. | 1.3.6.1.2.1.46.3.2.2 | current |
| dlswTConnStatGroup OBJECT-GROUP Conformance group for statistics for transport connections. | 1.3.6.1.2.1.46.3.2.3 | current |
| dlswTConnConfigGroup OBJECT-GROUP Conformance group for the configuration of transport connections. | 1.3.6.1.2.1.46.3.2.4 | current |
| dlswTConnOperGroup OBJECT-GROUP Conformance group for operation information for transport connections. | 1.3.6.1.2.1.46.3.2.5 | current |
| dlswTConnNBGroup OBJECT-GROUP Conformance group for operation information for transport connections, specifically for nodes that support NetBIOS. | 1.3.6.1.2.1.46.3.2.6 | current |
| dlswTConnTcpConfigGroup OBJECT-GROUP Conformance group for configuration information for transport connections using TCP. | 1.3.6.1.2.1.46.3.2.7 | current |
| dlswTConnTcpOperGroup OBJECT-GROUP Conformance group for operation information for transport connections using TCP. | 1.3.6.1.2.1.46.3.2.8 | current |
| dlswInterfaceGroup OBJECT-GROUP Conformance group for DLSw interfaces. | 1.3.6.1.2.1.46.3.2.9 | current |
| dlswDirGroup OBJECT-GROUP Conformance group for DLSw directory using MAC addresses. | 1.3.6.1.2.1.46.3.2.10 | current |
| dlswDirNBGroup OBJECT-GROUP Conformance group for DLSw directory using NetBIOS names. | 1.3.6.1.2.1.46.3.2.11 | current |
| dlswDirLocateGroup OBJECT-GROUP Conformance group for a node that can return directory entry order for a given MAC address. | 1.3.6.1.2.1.46.3.2.12 | current |
| dlswDirLocateNBGroup OBJECT-GROUP Conformance group for a node that can return directory entry order for a given NetBIOS name. | 1.3.6.1.2.1.46.3.2.13 | current |
| dlswCircuitStatGroup OBJECT-GROUP Conformance group for statistics about circuits. | 1.3.6.1.2.1.46.3.2.14 | current |
| dlswCircuitGroup OBJECT-GROUP Conformance group for DLSw circuits. | 1.3.6.1.2.1.46.3.2.15 | current |
| dlswSdlcGroup OBJECT-GROUP Conformance group for DLSw SDLC support. | 1.3.6.1.2.1.46.3.2.16 | current |
| dlswNotificationGroup NOTIFICATION-GROUP Conformance group for DLSw notifications. | 1.3.6.1.2.1.46.3.2.17 | current |