MIBs Depot

HH3C-SNA-DLSW-EXT-MIB

Registered at
1.3.6.1.4.1.25506.2.62
Last updated
2005-07-20 19:00
Organization
New H3C Tech. Co., Ltd.
Revisions
2005-07-20 19:00
Namespace
comware
Source file
HH3C-SNA-DLSW-EXT-MIB
Digest
sha256:37f87704b8e0b30cb07465823ec5cc688bbf7320438530fed81eaa66534f38cf

Description

The MIB module for management of specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795, RFC 2024 and RFC2166.

Contact

Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085

Imports

FromSymbols
DLSW-MIBLFSize, MacAddressNC, TAddress, dlswTConnConfigEntry, dlswTConnOperEntry, dlswTConnTcpConfigEntry
HH3C-OID-MIBhh3cCommon
IF-MIBifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DLSW-MIB
HH3C-OID-MIB
HH3C-SNA-DLSW-EXT-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNA-SDLC-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cDlswExtMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1
hh3cdeNode
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.1
hh3cdeNodeVendorID
OBJECT-TYPE
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
1.3.6.1.4.1.25506.2.62.1.1.1OCTET STRING (SIZE(3))read-writecurrent
hh3cdeNodeIpAddrType
OBJECT-TYPE
The type of ip address: IPv4 or IPv6.
1.3.6.1.4.1.25506.2.62.1.1.2InetAddressTyperead-writecurrent
hh3cdeNodeLocalAddr
OBJECT-TYPE
Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string.
1.3.6.1.4.1.25506.2.62.1.1.3InetAddressread-writecurrent
hh3cdeNodePriority
OBJECT-TYPE
Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered when a circuit is established. A lower priority indicates that peer will be the preferred choice if there are more than one path to the destination. A value of 65535 indicates the value is meaningless.
1.3.6.1.4.1.25506.2.62.1.1.4Integer32 (1..5 | 65535)read-writecurrent
hh3cdeNodeInitPacingWindow
OBJECT-TYPE
Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement. A value of 65535 indicates the value is meaningless.
1.3.6.1.4.1.25506.2.62.1.1.5Integer32 (1..2000 | 65535)read-writecurrent
hh3cdeNodeMaxPacingWindow
OBJECT-TYPE
Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement.
1.3.6.1.4.1.25506.2.62.1.1.6Integer32 (1..2000 | 65535)read-writecurrent
hh3cdeNodeKeepAliveInterval
OBJECT-TYPE
Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw to keep track of the state of all peers. If set to zero, no keepalives are sent. A value of 65535 indicates the value is meaningless.
1.3.6.1.4.1.25506.2.62.1.1.7Integer32 (0..2000 | 65535)read-writecurrent
hh3cdeNodePermitDynamic
OBJECT-TYPE
To accept connections from non-configured remote peer when permitDynamic is specified.
1.3.6.1.4.1.25506.2.62.1.1.8INTEGER {permitDynamic(1), forbidDynamic(2), unknown(65535)}read-writecurrent
hh3cdeNodeConnTimeout
OBJECT-TYPE
Define connected state timer.
1.3.6.1.4.1.25506.2.62.1.1.9Integer32 (1..65535)read-writecurrent
hh3cdeNodeLocalPendTimeout
OBJECT-TYPE
Define connected state timer.
1.3.6.1.4.1.25506.2.62.1.1.10Integer32 (1..65535)read-writecurrent
hh3cdeNodeRemotePendTimeout
OBJECT-TYPE
Define connected state timer.
1.3.6.1.4.1.25506.2.62.1.1.11Integer32 (1..65535)read-writecurrent
hh3cdeNodeSnaCacheTimeout
OBJECT-TYPE
Define connected state timer.
1.3.6.1.4.1.25506.2.62.1.1.12Integer32 (1..65535)read-writecurrent
hh3cdeNodeExplorerTimeout
OBJECT-TYPE
Define explorer timer.
1.3.6.1.4.1.25506.2.62.1.1.13Integer32 (1..65535)read-writecurrent
hh3cdeNodeExplorerWaitTimeout
OBJECT-TYPE
Define explorer waiting timer.
1.3.6.1.4.1.25506.2.62.1.1.14Integer32 (1..65535)read-writecurrent
hh3cdeNodeConfigSapList
OBJECT-TYPE
The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in hh3cdeIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.
1.3.6.1.4.1.25506.2.62.1.1.15OCTET STRING (SIZE(16))read-writecurrent
hh3cdeNodeMaxTransmission
OBJECT-TYPE
The maximum retry times for TCP packet. Default value is 5.
1.3.6.1.4.1.25506.2.62.1.1.16Integer32 (1..10)read-writecurrent
hh3cdeNodeMulticastStatus
OBJECT-TYPE
Multicast support status. It is disabled by default.
1.3.6.1.4.1.25506.2.62.1.1.17INTEGER {enabled(1), disabled(2)}read-writecurrent
hh3cdeNodeMulticastAddress
OBJECT-TYPE
Multicast address. Default is 224.0.10.0. When the hh3cdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0.
1.3.6.1.4.1.25506.2.62.1.1.18InetAddressread-writecurrent
hh3cdeNodeResetTcpAll
OBJECT-TYPE
Reset all TCP circuit switch. Any return value is meaningless.
1.3.6.1.4.1.25506.2.62.1.1.19INTEGER {reset(1)}read-writecurrent
hh3cdeNodeStCapTcpNum
OBJECT-TYPE
Tcp number reported in DLSw Capabilities Exchange.
1.3.6.1.4.1.25506.2.62.1.1.20Integer32 (0..255)read-writecurrent
hh3cdeNodeTcpQueueMax
OBJECT-TYPE
The max length of TCP queue.
1.3.6.1.4.1.25506.2.62.1.1.21Integer32read-writecurrent
hh3cdeTConn
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.2
hh3cdeTConnConfigTable
OBJECT-TYPE
This table defines the peer transport connections that will be initiated or accepted by this DLSw. This table augments dlswTConnConfigTable.
1.3.6.1.4.1.25506.2.62.1.2.1not-accessiblecurrent
hh3cdeTConnConfigEntry
OBJECT-TYPE
A list of objects that define specific configuration for a DLSw peer transport connection.
1.3.6.1.4.1.25506.2.62.1.2.1.1not-accessiblecurrent
hh3cdeTConnConfigVersion
OBJECT-TYPE
This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw Capabilities Exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a hh3cdeTConnOperState of 'connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep hh3cdeTConnOperEntrys in the 'disconnected' state, this value should remain unchanged.
1.3.6.1.4.1.25506.2.62.1.2.1.1.1OCTET STRING (SIZE(2))read-createcurrent
hh3cdeTConnConfigPriority
OBJECT-TYPE
The priority for remote peer.
1.3.6.1.4.1.25506.2.62.1.2.1.1.2Integer32 (1..5)read-createcurrent
hh3cdeTConnConfigLfSize
OBJECT-TYPE
The largest frame size.
1.3.6.1.4.1.25506.2.62.1.2.1.1.3LFSizeread-createcurrent
hh3cdeTConnConfigKeepaliveIntval
OBJECT-TYPE
The keepalive interval value.
1.3.6.1.4.1.25506.2.62.1.2.1.1.4Integer32 (1..1200)read-createcurrent
hh3cdeTConnConfigBackup
OBJECT-TYPE
The current remote peer is configured as the backup of another configured remote peer.
1.3.6.1.4.1.25506.2.62.1.2.1.1.5INTEGER {yes(1), no(2)}read-createcurrent
hh3cdeTConnConfigBackupTAddr
OBJECT-TYPE
It is the ip address of a configured remote peer of which the current remote peer is configrued as backup.
1.3.6.1.4.1.25506.2.62.1.2.1.1.6TAddressread-createcurrent
hh3cdeTConnConfigBackupLinger
OBJECT-TYPE
Backup peer linger.
1.3.6.1.4.1.25506.2.62.1.2.1.1.7Integer32 (0..1440)read-createcurrent
hh3cdeTConnOperTable
OBJECT-TYPE
A list of peer transport connections. Each connected peer will create a conceptual row in the table. When the peer disconnects, the row will be deleted from the table. This table augments dlswTConnOperTable.
1.3.6.1.4.1.25506.2.62.1.2.2not-accessiblecurrent
hh3cdeTConnOperEntry
OBJECT-TYPE
A list of objects that contain spefific operational information for a DLSw peer transport connection.
1.3.6.1.4.1.25506.2.62.1.2.2.1not-accessiblecurrent
hh3cdeTConnOperPeerType
OBJECT-TYPE
The current remote peer is configured when the value is 'configured'.
1.3.6.1.4.1.25506.2.62.1.2.2.1.1INTEGER {configured(1), learningDynamic(2), other(3)}read-onlycurrent
hh3cdeTConnOperVendorID
OBJECT-TYPE
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of remote peer.
1.3.6.1.4.1.25506.2.62.1.2.2.1.2OCTET STRINGread-onlycurrent
hh3cdeTConnOperVersionString
OBJECT-TYPE
Version information of remote peer. The length up to 512 bytes.
1.3.6.1.4.1.25506.2.62.1.2.2.1.3OCTET STRINGread-onlycurrent
hh3cdeTConnOperUpTime
OBJECT-TYPE
The amount of time (in seconds) since this transport connection last entered the 'connected' state.
1.3.6.1.4.1.25506.2.62.1.2.2.1.4TimeTicksread-onlycurrent
hh3cdeTConnOperMulticastAddress
OBJECT-TYPE
When remote peer supports DLSw2.0, this node identifies its multicast address.
1.3.6.1.4.1.25506.2.62.1.2.2.1.5TAddressread-onlycurrent
hh3cdeTConnOperStCapTcpNumber
OBJECT-TYPE
Number of tcp supported when capabilities exchanging.
1.3.6.1.4.1.25506.2.62.1.2.2.1.6Integer32read-onlycurrent
hh3cdeTConnOperRecvPkts
OBJECT-TYPE
The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.
1.3.6.1.4.1.25506.2.62.1.2.2.1.7Counter32read-onlycurrent
hh3cdeTConnOperSendPkts
OBJECT-TYPE
The number of SSP messages sent on this tcp transport connection.
1.3.6.1.4.1.25506.2.62.1.2.2.1.8Counter32read-onlycurrent
hh3cdeTConnOperDropPkts
OBJECT-TYPE
The number of SSP messages dropped on this tcp transport connection.
1.3.6.1.4.1.25506.2.62.1.2.2.1.9Counter32read-onlycurrent
hh3cdeTConnTcpConfigTable
OBJECT-TYPE
This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain. In other words for each conceptual row in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is dlswTCPDomain, that conceptual row will be augmented by this table. dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain are all imported from DLSW-MIB (RFC 2024). This table augments dlswTConnTcpConfigTable.
1.3.6.1.4.1.25506.2.62.1.2.3not-accessiblecurrent
hh3cdeTConnTcpConfigEntry
OBJECT-TYPE
A list of objects that define specific configuration for a DLSw peer transport connection within the dlswTCPDomain. dlswTCPDomain is imported from DLSW-MIB (RFC 2024).
1.3.6.1.4.1.25506.2.62.1.2.3.1not-accessiblecurrent
hh3cdeTConnTcpConfigQueueMax
OBJECT-TYPE
Maximum output TCP queue size for this remote peer. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set the output queue maximum of the underlying TCP connection for the peer represented by the conceptual row.
1.3.6.1.4.1.25506.2.62.1.2.3.1.1Integer32 (50..2000)read-createcurrent
hh3cdeBridge
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.3
hh3cdeBridgeTable
OBJECT-TYPE
A list of bridge group which is serving for DLSw.
1.3.6.1.4.1.25506.2.62.1.3.1not-accessiblecurrent
hh3cdeBridgeEntry
OBJECT-TYPE
A list of bridge information.
1.3.6.1.4.1.25506.2.62.1.3.1.1not-accessiblecurrent
hh3cdeBridgeNumIndex
OBJECT-TYPE
This value identifies the bridge number.
1.3.6.1.4.1.25506.2.62.1.3.1.1.1Integer32 (1..255)not-accessiblecurrent
hh3cdeBridgeRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.25506.2.62.1.3.1.1.2RowStatusread-createcurrent
hh3cdeBridgeIfTable
OBJECT-TYPE
The list of interface on which DLSw is active.
1.3.6.1.4.1.25506.2.62.1.3.2not-accessiblecurrent
hh3cdeBridgeIfEntry
OBJECT-TYPE
The list of bridge interface information.
1.3.6.1.4.1.25506.2.62.1.3.2.1not-accessiblecurrent
hh3cdeBridgeIfBrgGrp
OBJECT-TYPE
This value identifies the bridge number attached to the interface.
1.3.6.1.4.1.25506.2.62.1.3.2.1.1Integer32 (1..255)read-createcurrent
hh3cdeBridgeIfRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.25506.2.62.1.3.2.1.2RowStatusread-createcurrent
hh3cdeQllc
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.4
hh3cdeQllcTable
OBJECT-TYPE
The table defines attributes related for those QLLC that participate in data link switching.
1.3.6.1.4.1.25506.2.62.1.4.1not-accessiblecurrent
hh3cdeQllcEntry
OBJECT-TYPE
The ifIndex belongs to the interface which link protocol is x.25.
1.3.6.1.4.1.25506.2.62.1.4.1.1not-accessiblecurrent
hh3cQllcX121Address
OBJECT-TYPE
X.121 address.
1.3.6.1.4.1.25506.2.62.1.4.1.1.1Integer32read-createcurrent
hh3cQllcLocalMac
OBJECT-TYPE
The virtual MAC address used to represent the QLLC-attached link station to the rest of the DLSw network.
1.3.6.1.4.1.25506.2.62.1.4.1.1.2MacAddressNCread-createcurrent
hh3cQllcLocalSap
OBJECT-TYPE
The SAP used to represent this link station.
1.3.6.1.4.1.25506.2.62.1.4.1.1.3OCTET STRING (SIZE(1))read-createcurrent
hh3cQllcRemoteMac
OBJECT-TYPE
The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned.
1.3.6.1.4.1.25506.2.62.1.4.1.1.4MacAddressNCread-createcurrent
hh3cQllcRemoteSap
OBJECT-TYPE
The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned.
1.3.6.1.4.1.25506.2.62.1.4.1.1.5OCTET STRING (SIZE(0 | 1))read-createcurrent
hh3cQllcRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.25506.2.62.1.4.1.1.6RowStatusread-createcurrent
hh3cdeSdlc
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.5
hh3cdeSdlcPortTable
OBJECT-TYPE
The table defines parameters for the interfaces whose link protocol is SDLC.
1.3.6.1.4.1.25506.2.62.1.5.1not-accessiblecurrent
hh3cdeSdlcPortEntry
OBJECT-TYPE
Sdlc port entry.
1.3.6.1.4.1.25506.2.62.1.5.1.1not-accessiblecurrent
hh3cdeSdlcPortRole
OBJECT-TYPE
The SDLC role of interface.
1.3.6.1.4.1.25506.2.62.1.5.1.1.1INTEGER {primary(1), seconday(2), norole(3)}read-createcurrent
hh3cdeSdlcPortSendWindow
OBJECT-TYPE
Size of local send window.
1.3.6.1.4.1.25506.2.62.1.5.1.1.2Integer32 (1..7)read-createcurrent
hh3cdeSdlcPortModulo
OBJECT-TYPE
Size of modulus.
1.3.6.1.4.1.25506.2.62.1.5.1.1.3INTEGER {m8(8), m128(128)}read-createcurrent
hh3cdeSdlcPortMaxPdu
OBJECT-TYPE
Maximum bytes for incoming frames.
1.3.6.1.4.1.25506.2.62.1.5.1.1.4Integer32 (1..17600)read-createcurrent
hh3cdeSdlcPortMaxSendQueue
OBJECT-TYPE
Size of hold queue.
1.3.6.1.4.1.25506.2.62.1.5.1.1.5Integer32 (20..255)read-createcurrent
hh3cdeSdlcPortMaxTransmission
OBJECT-TYPE
Number of times to retry an operation.
1.3.6.1.4.1.25506.2.62.1.5.1.1.6Integer32 (1..255)read-createcurrent
hh3cdeSdlcPortSimultaneousEnable
OBJECT-TYPE
Activate SDLC two-way simultaneous mode.
1.3.6.1.4.1.25506.2.62.1.5.1.1.7INTEGER {enabled(1), disabled(2)}read-createcurrent
hh3cdeSdlcPortTimerACK
OBJECT-TYPE
Time to wait for a reply to a frame.
1.3.6.1.4.1.25506.2.62.1.5.1.1.8Integer32 (1..60000)read-createcurrent
hh3cdeSdlcPortTimerLifeTime
OBJECT-TYPE
Time to wait for a reply used by secondary station.
1.3.6.1.4.1.25506.2.62.1.5.1.1.9Integer32 (1..60000)read-createcurrent
hh3cdeSdlcPortTimerPollPause
OBJECT-TYPE
Time between polls for each secondary SDLC station.
1.3.6.1.4.1.25506.2.62.1.5.1.1.10Integer32 (1..10000)read-createcurrent
hh3cdeSdlcPortRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.25506.2.62.1.5.1.1.11RowStatusread-createcurrent
hh3cdeLlc2
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.6
hh3cdeLlc2PortTable
OBJECT-TYPE
This table defines parameters for the Ethernet interface.
1.3.6.1.4.1.25506.2.62.1.6.1not-accessiblecurrent
hh3cdeLlc2PortEntry
OBJECT-TYPE
LLC2 port entry.
1.3.6.1.4.1.25506.2.62.1.6.1.1not-accessiblecurrent
hh3cdeLlc2PortMaxAck
OBJECT-TYPE
Maximum of I-frames received before ACK.
1.3.6.1.4.1.25506.2.62.1.6.1.1.1Integer32 (1..127)read-createcurrent
hh3cdeLlc2PortMaxPdu
OBJECT-TYPE
Maximum of LLC2 pdu length.
1.3.6.1.4.1.25506.2.62.1.6.1.1.2Integer32 (1..1700)read-createcurrent
hh3cdeLlc2PortMaxSendQueue
OBJECT-TYPE
Queue for sending llc2 I-frames.
1.3.6.1.4.1.25506.2.62.1.6.1.1.3Integer32 (20..200)read-createcurrent
hh3cdeLlc2PortMaxTransmission
OBJECT-TYPE
Retry times of operations.
1.3.6.1.4.1.25506.2.62.1.6.1.1.4Integer32 (1..255)read-createcurrent
hh3cdeLlc2PortModulo
OBJECT-TYPE
Modulus of LLC2.
1.3.6.1.4.1.25506.2.62.1.6.1.1.5INTEGER {m8(8), m128(128)}read-createcurrent
hh3cdeLlc2PortReceiveWindow
OBJECT-TYPE
Maximum number of I-frames to send before received ACK.
1.3.6.1.4.1.25506.2.62.1.6.1.1.6Integer32 (1..127)read-createcurrent
hh3cdeLlc2PortTimerAck
OBJECT-TYPE
Waiting for ACK time after sending an I-frame.
1.3.6.1.4.1.25506.2.62.1.6.1.1.7Integer32 (1..60000)read-createcurrent
hh3cdeLlc2PortTimerAckDelay
OBJECT-TYPE
Maximum time allows I-frames incoming without replay ACK.
1.3.6.1.4.1.25506.2.62.1.6.1.1.8Integer32 (1..60000)read-createcurrent
hh3cdeLlc2PortTimerDetect
OBJECT-TYPE
Detect the link status.
1.3.6.1.4.1.25506.2.62.1.6.1.1.9Integer32 (1..60000)read-createcurrent
hh3cdeLlc2PortTimerBusy
OBJECT-TYPE
Waiting time while other LLC2 station is in busy state.
1.3.6.1.4.1.25506.2.62.1.6.1.1.10Integer32 (1..60000)read-createcurrent
hh3cdeLlc2PortTimerPoll
OBJECT-TYPE
Waiting time after a P frame is sent.
1.3.6.1.4.1.25506.2.62.1.6.1.1.11Integer32 (1..60000)read-createcurrent
hh3cdeLlc2PortTimerReject
OBJECT-TYPE
Waiting time after a REJ frame is sent.
1.3.6.1.4.1.25506.2.62.1.6.1.1.12Integer32 (1..60000)read-createcurrent
hh3cdeLlc2PortRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.25506.2.62.1.6.1.1.13RowStatusread-createcurrent
hh3cdeReachableCache
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.7
hh3cdeRchCacheStat
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.7.1
hh3cdeRchCacheMaxIndex
OBJECT-TYPE
Maximum of hh3cdeRchCacheIndex.
1.3.6.1.4.1.25506.2.62.1.7.1.1Integer32read-onlycurrent
hh3cdeRchCacheNextIndex
OBJECT-TYPE
The next value of hh3cdeRchCacheIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hh3cdeRchCacheTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows.
1.3.6.1.4.1.25506.2.62.1.7.1.2Integer32read-onlycurrent
hh3cdeRchCacheTable
OBJECT-TYPE
Reachable cache table.
1.3.6.1.4.1.25506.2.62.1.7.3not-accessiblecurrent
hh3cdeRchCacheEntry
OBJECT-TYPE
Reachable cache entry.
1.3.6.1.4.1.25506.2.62.1.7.3.1not-accessiblecurrent
hh3cdeRchCacheIndex
OBJECT-TYPE
Index of reachable cache entry.
1.3.6.1.4.1.25506.2.62.1.7.3.1.1Integer32not-accessiblecurrent
hh3cdeRchCacheStatus
OBJECT-TYPE
Current status of reachable cache entry.
1.3.6.1.4.1.25506.2.62.1.7.3.1.2INTEGER {found(1), verify(2), noCacheInfo(3), exploring(4), waiting(5)}read-onlycurrent
hh3cdeRchCacheRemainTime
OBJECT-TYPE
Remain time of reachable cache entry.
1.3.6.1.4.1.25506.2.62.1.7.3.1.3TimeTicksread-onlycurrent
hh3cdeRchCacheMac
OBJECT-TYPE
MAC address of reachable cache entry.
1.3.6.1.4.1.25506.2.62.1.7.3.1.4MacAddressNCread-createcurrent
hh3cdeRchCacheRemoteIpAddrType
OBJECT-TYPE
Remote peer ip address type.
1.3.6.1.4.1.25506.2.62.1.7.3.1.5InetAddressTyperead-createcurrent
hh3cdeRchCacheRemoteIp
OBJECT-TYPE
Remote peer ip address of reachable cache entry.
1.3.6.1.4.1.25506.2.62.1.7.3.1.6InetAddressread-createcurrent
hh3cdeRchCacheRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.25506.2.62.1.7.3.1.7RowStatusread-createcurrent
hh3cdeEthernetBackup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.8
hh3cdeEBMacMapStat
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.62.1.8.1
hh3cdeEBMacMapMaxIndex
OBJECT-TYPE
Maximum of hh3cdeEBMacMapIndex.
1.3.6.1.4.1.25506.2.62.1.8.1.1Integer32read-onlycurrent
hh3cdeEBMacMapNextIndex
OBJECT-TYPE
The next value of hh3cdeEBMacMapIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hh3cdeEBMacMapTable. This makes it possible for the agent to control the index space of the MAC mapping tables, yet allows the manager to administratively create new rows.
1.3.6.1.4.1.25506.2.62.1.8.1.2Integer32read-onlycurrent
hh3cdeEBIfTable
OBJECT-TYPE
Information of interface which works for DLSw Ethernet redundancy.
1.3.6.1.4.1.25506.2.62.1.8.3not-accessiblecurrent
hh3cdeEBIfEntry
OBJECT-TYPE
Parameters defined for DLSw Ethernet redundancy interface.
1.3.6.1.4.1.25506.2.62.1.8.3.1not-accessiblecurrent
hh3cdeEBMulticastMac
OBJECT-TYPE
Multicast MAC address configured for the Ethernet redundancy of dlsw module. When Ethernet redundancy is inactive, its value is '000000000000'H. To active Ethernet redundancy, give it a valid multicast MAC address.
1.3.6.1.4.1.25506.2.62.1.8.3.1.1MacAddressNCread-createcurrent
hh3cdeEBPriority
OBJECT-TYPE
Priority configured for the Ethernet redundancy of DLSw module.
1.3.6.1.4.1.25506.2.62.1.8.3.1.2Integer32 (1..254)read-createcurrent
hh3cdeEBtimer
OBJECT-TYPE
Timer for the Ethernet redundancy of DLSw module.
1.3.6.1.4.1.25506.2.62.1.8.3.1.3Integer32 (100..5000)read-createcurrent
hh3cdeEBRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.25506.2.62.1.8.3.1.4RowStatusread-createcurrent
hh3cdeEBMacMapTable
OBJECT-TYPE
MAC address mapping table.
1.3.6.1.4.1.25506.2.62.1.8.4not-accessiblecurrent
hh3cdeEBMacMapEntry
OBJECT-TYPE
MAC address mapping entry.
1.3.6.1.4.1.25506.2.62.1.8.4.1not-accessiblecurrent
hh3cdeEBMacMapIndex
OBJECT-TYPE
Index of MAC address mapping entry.
1.3.6.1.4.1.25506.2.62.1.8.4.1.1Integer32not-accessiblecurrent
hh3cdeEBMacMapLocalMac
OBJECT-TYPE
Local MAC address in MAC address mapping. When creating a new conceptual row, hh3cdeEBMacMapLocalMac and hh3cdeEBMacMapRemoteMac should be set simultaneously.
1.3.6.1.4.1.25506.2.62.1.8.4.1.2MacAddressNCread-createcurrent
hh3cdeEBMacMapRemoteMac
OBJECT-TYPE
Remote MAC address of MAC address mapping. When creating a new conceptual row, hh3cdeEBMacMapLocalMac and hh3cdeEBMacMapRemoteMac should be set simultaneously.
1.3.6.1.4.1.25506.2.62.1.8.4.1.3MacAddressNCread-createcurrent
hh3cdeEBMacMapNeighbour
OBJECT-TYPE
Neighbour of MAC address mapping.
1.3.6.1.4.1.25506.2.62.1.8.4.1.4MacAddressNCread-createcurrent
hh3cdeEBMacMapRowStatus
OBJECT-TYPE
Status of MAC address mapping entry.
1.3.6.1.4.1.25506.2.62.1.8.4.1.5RowStatusread-createcurrent