MIBs Depot

HPN-ICF-SNA-DLSW-EXT-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.2.62
Last updated
2005-07-20 19:00
Revisions
2005-07-20 19:00
Namespace
hp
Source file
HPN-ICF-SNA-DLSW-EXT-MIB
Digest
sha256:8cfa65211028c893737e31064e6e7156e951a6ee4135ae132fb76af6168c3429

Description

The MIB module for management of specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795, RFC 2024 and RFC2166.

Imports

FromSymbols
DLSW-MIBLFSize, MacAddressNC, TAddress, dlswTConnConfigEntry, dlswTConnOperEntry, dlswTConnTcpConfigEntry
HPN-ICF-OID-MIBhpnicfCommon
IF-MIBifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DLSW-MIB
HPN-ICF-OID-MIB
HPN-ICF-SNA-DLSW-EXT-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNA-SDLC-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpnicfDlswExtMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1
hpnicfdeNode
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1
hpnicfdeNodeVendorID
OBJECT-TYPE
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.1OCTET STRING (SIZE(3))read-writecurrent
hpnicfdeNodeIpAddrType
OBJECT-TYPE
The type of ip address: IPv4 or IPv6.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.2InetAddressTyperead-writecurrent
hpnicfdeNodeLocalAddr
OBJECT-TYPE
Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.3InetAddressread-writecurrent
hpnicfdeNodePriority
OBJECT-TYPE
Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered when a circuit is established. A lower priority indicates that peer will be the preferred choice if there are more than one path to the destination. A value of 65535 indicates the value is meaningless.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.4Integer32 (1..5 | 65535)read-writecurrent
hpnicfdeNodeInitPacingWindow
OBJECT-TYPE
Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement. A value of 65535 indicates the value is meaningless.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.5Integer32 (1..2000 | 65535)read-writecurrent
hpnicfdeNodeMaxPacingWindow
OBJECT-TYPE
Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.6Integer32 (1..2000 | 65535)read-writecurrent
hpnicfdeNodeKeepAliveInterval
OBJECT-TYPE
Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw to keep track of the state of all peers. If set to zero, no keepalives are sent. A value of 65535 indicates the value is meaningless.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.7Integer32 (0..2000 | 65535)read-writecurrent
hpnicfdeNodePermitDynamic
OBJECT-TYPE
To accept connections from non-configured remote peer when permitDynamic is specified.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.8INTEGER {permitDynamic(1), forbidDynamic(2), unknown(65535)}read-writecurrent
hpnicfdeNodeConnTimeout
OBJECT-TYPE
Define connected state timer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.9Integer32 (1..65535)read-writecurrent
hpnicfdeNodeLocalPendTimeout
OBJECT-TYPE
Define connected state timer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.10Integer32 (1..65535)read-writecurrent
hpnicfdeNodeRemotePendTimeout
OBJECT-TYPE
Define connected state timer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.11Integer32 (1..65535)read-writecurrent
hpnicfdeNodeSnaCacheTimeout
OBJECT-TYPE
Define connected state timer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.12Integer32 (1..65535)read-writecurrent
hpnicfdeNodeExplorerTimeout
OBJECT-TYPE
Define explorer timer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.13Integer32 (1..65535)read-writecurrent
hpnicfdeNodeExplorerWaitTimeout
OBJECT-TYPE
Define explorer waiting timer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.14Integer32 (1..65535)read-writecurrent
hpnicfdeNodeConfigSapList
OBJECT-TYPE
The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in hpnicfdeIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15OCTET STRING (SIZE(16))read-writecurrent
hpnicfdeNodeMaxTransmission
OBJECT-TYPE
The maximum retry times for TCP packet. Default value is 5.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.16Integer32 (1..10)read-writecurrent
hpnicfdeNodeMulticastStatus
OBJECT-TYPE
Multicast support status. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.17INTEGER {enabled(1), disabled(2)}read-writecurrent
hpnicfdeNodeMulticastAddress
OBJECT-TYPE
Multicast address. Default is 224.0.10.0. When the hpnicfdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.18InetAddressread-writecurrent
hpnicfdeNodeResetTcpAll
OBJECT-TYPE
Reset all TCP circuit switch. Any return value is meaningless.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.19INTEGER {reset(1)}read-writecurrent
hpnicfdeNodeStCapTcpNum
OBJECT-TYPE
Tcp number reported in DLSw Capabilities Exchange.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.20Integer32 (0..255)read-writecurrent
hpnicfdeNodeTcpQueueMax
OBJECT-TYPE
The max length of TCP queue.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.21Integer32read-writecurrent
hpnicfdeTConn
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2
hpnicfdeTConnConfigTable
OBJECT-TYPE
This table defines the peer transport connections that will be initiated or accepted by this DLSw. This table augments dlswTConnConfigTable.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1not-accessiblecurrent
hpnicfdeTConnConfigEntry
OBJECT-TYPE
A list of objects that define specific configuration for a DLSw peer transport connection.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1not-accessiblecurrent
hpnicfdeTConnConfigVersion
OBJECT-TYPE
This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw Capabilities Exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a hpnicfdeTConnOperState of 'connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep hpnicfdeTConnOperEntrys in the 'disconnected' state, this value should remain unchanged.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.1OCTET STRING (SIZE(2))read-createcurrent
hpnicfdeTConnConfigPriority
OBJECT-TYPE
The priority for remote peer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.2Integer32 (1..5)read-createcurrent
hpnicfdeTConnConfigLfSize
OBJECT-TYPE
The largest frame size.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.3LFSizeread-createcurrent
hpnicfdeTConnConfigKeepaliveIntval
OBJECT-TYPE
The keepalive interval value.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.4Integer32 (1..1200)read-createcurrent
hpnicfdeTConnConfigBackup
OBJECT-TYPE
The current remote peer is configured as the backup of another configured remote peer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.5INTEGER {yes(1), no(2)}read-createcurrent
hpnicfdeTConnConfigBackupTAddr
OBJECT-TYPE
It is the ip address of a configured remote peer of which the current remote peer is configrued as backup.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.6TAddressread-createcurrent
hpnicfdeTConnConfigBackupLinger
OBJECT-TYPE
Backup peer linger.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.7Integer32 (0..1440)read-createcurrent
hpnicfdeTConnOperTable
OBJECT-TYPE
A list of peer transport connections. Each connected peer will create a conceptual row in the table. When the peer disconnects, the row will be deleted from the table. This table augments dlswTConnOperTable.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2not-accessiblecurrent
hpnicfdeTConnOperEntry
OBJECT-TYPE
A list of objects that contain spefific operational information for a DLSw peer transport connection.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1not-accessiblecurrent
hpnicfdeTConnOperPeerType
OBJECT-TYPE
The current remote peer is configured when the value is 'configured'.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.1INTEGER {configured(1), learningDynamic(2), other(3)}read-onlycurrent
hpnicfdeTConnOperVendorID
OBJECT-TYPE
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of remote peer.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.2OCTET STRINGread-onlycurrent
hpnicfdeTConnOperVersionString
OBJECT-TYPE
Version information of remote peer. The length up to 512 bytes.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.3OCTET STRINGread-onlycurrent
hpnicfdeTConnOperUpTime
OBJECT-TYPE
The amount of time (in seconds) since this transport connection last entered the 'connected' state.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.4TimeTicksread-onlycurrent
hpnicfdeTConnOperMulticastAddress
OBJECT-TYPE
When remote peer supports DLSw2.0, this node identifies its multicast address.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.5TAddressread-onlycurrent
hpnicfdeTConnOperStCapTcpNumber
OBJECT-TYPE
Number of tcp supported when capabilities exchanging.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.6Integer32read-onlycurrent
hpnicfdeTConnOperRecvPkts
OBJECT-TYPE
The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.7Counter32read-onlycurrent
hpnicfdeTConnOperSendPkts
OBJECT-TYPE
The number of SSP messages sent on this tcp transport connection.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.8Counter32read-onlycurrent
hpnicfdeTConnOperDropPkts
OBJECT-TYPE
The number of SSP messages dropped on this tcp transport connection.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.9Counter32read-onlycurrent
hpnicfdeTConnTcpConfigTable
OBJECT-TYPE
This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain. In other words for each conceptual row in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is dlswTCPDomain, that conceptual row will be augmented by this table. dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain are all imported from DLSW-MIB (RFC 2024). This table augments dlswTConnTcpConfigTable.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3not-accessiblecurrent
hpnicfdeTConnTcpConfigEntry
OBJECT-TYPE
A list of objects that define specific configuration for a DLSw peer transport connection within the dlswTCPDomain. dlswTCPDomain is imported from DLSW-MIB (RFC 2024).
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1not-accessiblecurrent
hpnicfdeTConnTcpConfigQueueMax
OBJECT-TYPE
Maximum output TCP queue size for this remote peer. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set the output queue maximum of the underlying TCP connection for the peer represented by the conceptual row.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1.1Integer32 (50..2000)read-createcurrent
hpnicfdeBridge
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3
hpnicfdeBridgeTable
OBJECT-TYPE
A list of bridge group which is serving for DLSw.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1not-accessiblecurrent
hpnicfdeBridgeEntry
OBJECT-TYPE
A list of bridge information.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1not-accessiblecurrent
hpnicfdeBridgeNumIndex
OBJECT-TYPE
This value identifies the bridge number.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.1Integer32 (1..255)not-accessiblecurrent
hpnicfdeBridgeRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.2RowStatusread-createcurrent
hpnicfdeBridgeIfTable
OBJECT-TYPE
The list of interface on which DLSw is active.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2not-accessiblecurrent
hpnicfdeBridgeIfEntry
OBJECT-TYPE
The list of bridge interface information.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1not-accessiblecurrent
hpnicfdeBridgeIfBrgGrp
OBJECT-TYPE
This value identifies the bridge number attached to the interface.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.1Integer32 (1..255)read-createcurrent
hpnicfdeBridgeIfRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.2RowStatusread-createcurrent
hpnicfdeQllc
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4
hpnicfdeQllcTable
OBJECT-TYPE
The table defines attributes related for those QLLC that participate in data link switching.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1not-accessiblecurrent
hpnicfdeQllcEntry
OBJECT-TYPE
The ifIndex belongs to the interface which link protocol is x.25.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1not-accessiblecurrent
hpnicfQllcX121Address
OBJECT-TYPE
X.121 address.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.1Integer32read-createcurrent
hpnicfQllcLocalMac
OBJECT-TYPE
The virtual MAC address used to represent the QLLC-attached link station to the rest of the DLSw network.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.2MacAddressNCread-createcurrent
hpnicfQllcLocalSap
OBJECT-TYPE
The SAP used to represent this link station.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.3OCTET STRING (SIZE(1))read-createcurrent
hpnicfQllcRemoteMac
OBJECT-TYPE
The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.4MacAddressNCread-createcurrent
hpnicfQllcRemoteSap
OBJECT-TYPE
The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.5OCTET STRING (SIZE(0 | 1))read-createcurrent
hpnicfQllcRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.6RowStatusread-createcurrent
hpnicfdeSdlc
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5
hpnicfdeSdlcPortTable
OBJECT-TYPE
The table defines parameters for the interfaces whose link protocol is SDLC.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1not-accessiblecurrent
hpnicfdeSdlcPortEntry
OBJECT-TYPE
Sdlc port entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1not-accessiblecurrent
hpnicfdeSdlcPortRole
OBJECT-TYPE
The SDLC role of interface.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.1INTEGER {primary(1), seconday(2), norole(3)}read-createcurrent
hpnicfdeSdlcPortSendWindow
OBJECT-TYPE
Size of local send window.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.2Integer32 (1..7)read-createcurrent
hpnicfdeSdlcPortModulo
OBJECT-TYPE
Size of modulus.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.3INTEGER {m8(8), m128(128)}read-createcurrent
hpnicfdeSdlcPortMaxPdu
OBJECT-TYPE
Maximum bytes for incoming frames.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.4Integer32 (1..17600)read-createcurrent
hpnicfdeSdlcPortMaxSendQueue
OBJECT-TYPE
Size of hold queue.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.5Integer32 (20..255)read-createcurrent
hpnicfdeSdlcPortMaxTransmission
OBJECT-TYPE
Number of times to retry an operation.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.6Integer32 (1..255)read-createcurrent
hpnicfdeSdlcPortSimultaneousEnable
OBJECT-TYPE
Activate SDLC two-way simultaneous mode.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.7INTEGER {enabled(1), disabled(2)}read-createcurrent
hpnicfdeSdlcPortTimerACK
OBJECT-TYPE
Time to wait for a reply to a frame.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.8Integer32 (1..60000)read-createcurrent
hpnicfdeSdlcPortTimerLifeTime
OBJECT-TYPE
Time to wait for a reply used by secondary station.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.9Integer32 (1..60000)read-createcurrent
hpnicfdeSdlcPortTimerPollPause
OBJECT-TYPE
Time between polls for each secondary SDLC station.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.10Integer32 (1..10000)read-createcurrent
hpnicfdeSdlcPortRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.11RowStatusread-createcurrent
hpnicfdeLlc2
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6
hpnicfdeLlc2PortTable
OBJECT-TYPE
This table defines parameters for the Ethernet interface.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1not-accessiblecurrent
hpnicfdeLlc2PortEntry
OBJECT-TYPE
LLC2 port entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1not-accessiblecurrent
hpnicfdeLlc2PortMaxAck
OBJECT-TYPE
Maximum of I-frames received before ACK.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.1Integer32 (1..127)read-createcurrent
hpnicfdeLlc2PortMaxPdu
OBJECT-TYPE
Maximum of LLC2 pdu length.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.2Integer32 (1..1700)read-createcurrent
hpnicfdeLlc2PortMaxSendQueue
OBJECT-TYPE
Queue for sending llc2 I-frames.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.3Integer32 (20..200)read-createcurrent
hpnicfdeLlc2PortMaxTransmission
OBJECT-TYPE
Retry times of operations.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.4Integer32 (1..255)read-createcurrent
hpnicfdeLlc2PortModulo
OBJECT-TYPE
Modulus of LLC2.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.5INTEGER {m8(8), m128(128)}read-createcurrent
hpnicfdeLlc2PortReceiveWindow
OBJECT-TYPE
Maximum number of I-frames to send before received ACK.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.6Integer32 (1..127)read-createcurrent
hpnicfdeLlc2PortTimerAck
OBJECT-TYPE
Waiting for ACK time after sending an I-frame.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.7Integer32 (1..60000)read-createcurrent
hpnicfdeLlc2PortTimerAckDelay
OBJECT-TYPE
Maximum time allows I-frames incoming without replay ACK.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.8Integer32 (1..60000)read-createcurrent
hpnicfdeLlc2PortTimerDetect
OBJECT-TYPE
Detect the link status.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.9Integer32 (1..60000)read-createcurrent
hpnicfdeLlc2PortTimerBusy
OBJECT-TYPE
Waiting time while other LLC2 station is in busy state.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.10Integer32 (1..60000)read-createcurrent
hpnicfdeLlc2PortTimerPoll
OBJECT-TYPE
Waiting time after a P frame is sent.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.11Integer32 (1..60000)read-createcurrent
hpnicfdeLlc2PortTimerReject
OBJECT-TYPE
Waiting time after a REJ frame is sent.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.12Integer32 (1..60000)read-createcurrent
hpnicfdeLlc2PortRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.13RowStatusread-createcurrent
hpnicfdeReachableCache
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7
hpnicfdeRchCacheStat
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1
hpnicfdeRchCacheMaxIndex
OBJECT-TYPE
Maximum of hpnicfdeRchCacheIndex.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.1Integer32read-onlycurrent
hpnicfdeRchCacheNextIndex
OBJECT-TYPE
The next value of hpnicfdeRchCacheIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeRchCacheTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.2Integer32read-onlycurrent
hpnicfdeRchCacheTable
OBJECT-TYPE
Reachable cache table.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3not-accessiblecurrent
hpnicfdeRchCacheEntry
OBJECT-TYPE
Reachable cache entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1not-accessiblecurrent
hpnicfdeRchCacheIndex
OBJECT-TYPE
Index of reachable cache entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.1Integer32not-accessiblecurrent
hpnicfdeRchCacheStatus
OBJECT-TYPE
Current status of reachable cache entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.2INTEGER {found(1), verify(2), noCacheInfo(3), exploring(4), waiting(5)}read-onlycurrent
hpnicfdeRchCacheRemainTime
OBJECT-TYPE
Remain time of reachable cache entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.3TimeTicksread-onlycurrent
hpnicfdeRchCacheMac
OBJECT-TYPE
MAC address of reachable cache entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.4MacAddressNCread-createcurrent
hpnicfdeRchCacheRemoteIpAddrType
OBJECT-TYPE
Remote peer ip address type.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.5InetAddressTyperead-createcurrent
hpnicfdeRchCacheRemoteIp
OBJECT-TYPE
Remote peer ip address of reachable cache entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.6InetAddressread-createcurrent
hpnicfdeRchCacheRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.7RowStatusread-createcurrent
hpnicfdeEthernetBackup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8
hpnicfdeEBMacMapStat
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1
hpnicfdeEBMacMapMaxIndex
OBJECT-TYPE
Maximum of hpnicfdeEBMacMapIndex.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.1Integer32read-onlycurrent
hpnicfdeEBMacMapNextIndex
OBJECT-TYPE
The next value of hpnicfdeEBMacMapIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeEBMacMapTable. This makes it possible for the agent to control the index space of the MAC mapping tables, yet allows the manager to administratively create new rows.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.2Integer32read-onlycurrent
hpnicfdeEBIfTable
OBJECT-TYPE
Information of interface which works for DLSw Ethernet redundancy.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3not-accessiblecurrent
hpnicfdeEBIfEntry
OBJECT-TYPE
Parameters defined for DLSw Ethernet redundancy interface.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1not-accessiblecurrent
hpnicfdeEBMulticastMac
OBJECT-TYPE
Multicast MAC address configured for the Ethernet redundancy of dlsw module. When Ethernet redundancy is inactive, its value is '000000000000'H. To active Ethernet redundancy, give it a valid multicast MAC address.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.1MacAddressNCread-createcurrent
hpnicfdeEBPriority
OBJECT-TYPE
Priority configured for the Ethernet redundancy of DLSw module.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.2Integer32 (1..254)read-createcurrent
hpnicfdeEBtimer
OBJECT-TYPE
Timer for the Ethernet redundancy of DLSw module.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.3Integer32 (100..5000)read-createcurrent
hpnicfdeEBRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.4RowStatusread-createcurrent
hpnicfdeEBMacMapTable
OBJECT-TYPE
MAC address mapping table.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4not-accessiblecurrent
hpnicfdeEBMacMapEntry
OBJECT-TYPE
MAC address mapping entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1not-accessiblecurrent
hpnicfdeEBMacMapIndex
OBJECT-TYPE
Index of MAC address mapping entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.1Integer32not-accessiblecurrent
hpnicfdeEBMacMapLocalMac
OBJECT-TYPE
Local MAC address in MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.2MacAddressNCread-createcurrent
hpnicfdeEBMacMapRemoteMac
OBJECT-TYPE
Remote MAC address of MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.3MacAddressNCread-createcurrent
hpnicfdeEBMacMapNeighbour
OBJECT-TYPE
Neighbour of MAC address mapping.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.4MacAddressNCread-createcurrent
hpnicfdeEBMacMapRowStatus
OBJECT-TYPE
Status of MAC address mapping entry.
1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.5RowStatusread-createcurrent