MIBs Depot

ATM-FORUM-SNMP-M4-MIB

Registered at
1.3.6.1.4.1.353.5.1
Last updated
1998-05-14 00:00
Organization
The ATM Forum
Revisions
1998-05-14 00:00
Namespace
standard
Source file
ATM-FORUM-SNMP-M4-MIB
Digest
sha256:038247bef4baa57f6f7f6dd56502fcd583d05406889ca5f31b1113e8c783f249

Description

This MIB module is the SNMP version of the ATM Forum's M4 interface (network element view).

Contact

The ATM Forum 2570 West El Camino Real, Suite 304 Mountain View, CA 94040-1313 USA Phone: +1 415-949-6700 Fax: +1 415-949-6705 info@atmforum.com

Imports

FromSymbols
ATM-MIBatmVcCrossConnectEntry, atmVcCrossConnectH2LOperStatus, atmVcCrossConnectL2HOperStatus, atmVclEntry, atmVclOperStatus, atmVclVci, atmVclVpi, atmVpCrossConnectEntry, atmVpCrossConnectH2LOperStatus, atmVpCrossConnectL2HOperStatus, atmVplEntry, atmVplOperStatus, atmVplVpi
ENTITY-MIBentPhysicalClass, entPhysicalContainedIn, entPhysicalIndex, entPhysicalParentRelPos
HOST-RESOURCES-MIBhrSWInstalledIndex, hrSWInstalledName
IF-MIBOwnerString, ifIndex, ifOperStatus
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCAutonomousType, DateAndTime, DisplayString, RowPointer, RowStatus, TEXTUAL-CONVENTION, TestAndIncr, TimeInterval, TimeStamp, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-FORUM-SNMP-M4-MIB
ATM-MIB
ATM-TC-MIB
ENTITY-MIB
HOST-RESOURCES-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
AtmfM4AlarmLogSeverity
TEXTUAL-CONVENTION
The value of this object identifies the severity of an alarm in the log, including 'cleared'.
current
AtmfM4AlarmSeverity
TEXTUAL-CONVENTION
The value of this object identifies the severity of an alarm that has occurred. (Note that there is no value corresponding to 'cleared'.)
current

Objects

NameOIDSyntaxAccessStatus
atmForum
OBJECT-IDENTITY
1.3.6.1.4.1.353
atmForumNetworkManagement
OBJECT-IDENTITY
1.3.6.1.4.1.353.5
atmfM4
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1
atmfM4SnmpNEView
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1.3
atmfM4MIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1.3.1.1
atmfM4NeVendor
OBJECT-TYPE
The vendor of the ATM network element.
1.3.6.1.4.1.353.5.1.3.1.1.1DisplayStringread-onlycurrent
atmfM4NeVersion
OBJECT-TYPE
The version of the ATM network element.
1.3.6.1.4.1.353.5.1.3.1.1.2AutonomousTyperead-onlycurrent
atmfM4NeStartTime
OBJECT-TYPE
The time at which the agent was last started; in other words, the time at which sysUpTime was zero.
1.3.6.1.4.1.353.5.1.3.1.1.3DateAndTimeread-onlycurrent
atmfM4NeAlarmSeverityIndex
OBJECT-TYPE
An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for the ATM network element. The default value for this object is zero.
1.3.6.1.4.1.353.5.1.3.1.1.4Integer32read-writecurrent
atmfM4NeSuppressZeroStats
OBJECT-TYPE
When the value of this object is true, no entry will be created in any of the historical statistics tables for intervals in which all counts are zero. The default value for this object is true(1).
1.3.6.1.4.1.353.5.1.3.1.1.5TruthValueread-writecurrent
atmfM4PhysPathTpTable
OBJECT-TYPE
The ATM Forum M4 interface Configuration table extensions for the physical path termination point.
1.3.6.1.4.1.353.5.1.3.1.1.6not-accessiblecurrent
atmfM4PhysPathTpEntry
OBJECT-TYPE
Columns conceptually added to the interface table entry for an ATM interface to model the physical path termination point. The row of the interface table modeling this object should also include columns for the TC Adapter object and the ATM interface table defined in RFC 1695. The interface table entry for the physical path TP fields of an ATM interface are set up without management system control (or else that setup is outside the scope of M4).
1.3.6.1.4.1.353.5.1.3.1.1.6.1not-accessiblecurrent
atmfM4PhysPathTpHwUnitIndex
OBJECT-TYPE
Specifies the index of the entry in the entPhysicalTable that represents the device (i.e., card) on which the physical path terminates.
1.3.6.1.4.1.353.5.1.3.1.1.6.1.1Integer32 (1..2147483647)read-onlycurrent
atmfM4PhysPathTpPortID
OBJECT-TYPE
Identifies the port (within the card identified by the hardware unit index) on which the physical path terminates.
1.3.6.1.4.1.353.5.1.3.1.1.6.1.2Integer32 (1..2147483647)read-onlycurrent
atmfM4PhysPathTpAlarmSeverityIndex
OBJECT-TYPE
Specifies the index of the entry in the communications alarm severity profile table that should be used. The default value of this object is zero.
1.3.6.1.4.1.353.5.1.3.1.1.6.1.3Integer32read-writecurrent
atmfM4TcAdapterTable
OBJECT-TYPE
The ATM Forum M4 interface Configuration table extensions for the TC Adapter.
1.3.6.1.4.1.353.5.1.3.1.1.7not-accessiblecurrent
atmfM4TcAdapterEntry
OBJECT-TYPE
Columns conceptually added to the interface table entry for an ATM interface to model the TC Adapter. The row of the interface table modeling this object should also include columns for the physical path TP and the ATM interface table defined in RFC 1695. The interface table entry for the TC Adapter fields of an ATM interface are set up without management system control (or else that setup is outside the scope of M4).
1.3.6.1.4.1.353.5.1.3.1.1.7.1not-accessiblecurrent
atmfM4TcACellScrambling
OBJECT-TYPE
This attribute is used by the management system to activate and deactivate the ATM cell scrambling function. When the value of this attribute is TRUE, cell scrambling on the interface is activated. This attribute shall be present only for interfaces that support the deactivation of cell scrambling. The ATM Forum UNI specification requires cell scrambling for ATM/SONET interfaces but allows cell scrambling to be controlled (i.e., turned on and off) for ATM/DS3 interfaces. The default value of this object is true(1).
1.3.6.1.4.1.353.5.1.3.1.1.7.1.1TruthValueread-writecurrent
atmfM4TcAlarmSeverityIndex
OBJECT-TYPE
Specifies the index of the entry in the communications alarm severity profile table that should be used. The default value of this object is zero.
1.3.6.1.4.1.353.5.1.3.1.1.7.1.2Integer32read-writecurrent
atmfM4AtmLayerTable
OBJECT-TYPE
The ATM Forum M4 interface Configuration table extensions for the ATM cell layer.
1.3.6.1.4.1.353.5.1.3.1.1.8not-accessiblecurrent
atmfM4AtmLayerEntry
OBJECT-TYPE
Columns conceptually added to the interface table entry for an ATM interface to model the ATM cell layer. The row of the interface table modeling this object should also include columns for the physical path TP and TC Adapter object, as well as the ATM interface table defined in RFC 1695. The default configuration of an entry in this table is used whenever the entries for the physical path TP, etc., are created. The management system configures a UNI, B-ICI, or B-ISSI on the interface by first modifying the atmfM4IfType column (this can be done in the same SNMP set-request that sets up the other necessary variables.
1.3.6.1.4.1.353.5.1.3.1.1.8.1not-accessiblecurrent
atmfM4IfType
OBJECT-TYPE
Specifies the type of ATM cell layer interface defined on the physical path termination point modeled by this entry in the interface table. The default value of this object is none(0).
1.3.6.1.4.1.353.5.1.3.1.1.8.1.1INTEGER {none(0), uni(1), bici(2), bissi(3)}read-writecurrent
atmfM4IfLoopbackLocationCode
OBJECT-TYPE
Specifies the code that shall exist in incoming OAM Loopback cells that are to be looped back at this interface. A value of zero shall indicate that the management system has not set any loopback location code for this interface. Therefore, zero should not be used as the actual loopback location code for any interface. This object shall be present only for table entries that represent an actual ATM cell layer interface (i.e., the atmfM4IfType is not none(0)). The default value of this object is zero.
1.3.6.1.4.1.353.5.1.3.1.1.8.1.2Integer32read-writecurrent
atmfM4IfSubscriberAddress
OBJECT-TYPE
Specifies the address or newline-delimited list of addresses assigned to the UNI. This object shall be present only for table entries that represent a UNI interface. The default value of this object is the null string.
1.3.6.1.4.1.353.5.1.3.1.1.8.1.3DisplayStringread-writecurrent
atmfM4IfPreferredCarrier
OBJECT-TYPE
Specifies the name of the default carrier to use when one is not explicitly identified in the call set-up message. This object shall be present only for table entries that represent a UNI interface and only when SVC services are supported. The default value of this object is the null string.
1.3.6.1.4.1.353.5.1.3.1.1.8.1.4DisplayStringread-writecurrent
atmfM4IfFarEndCarrierNetwork
OBJECT-TYPE
Specifies the adjacent carrier to which the B-ICI transmission path is connected. This object shall be present only for table entries that represent a B-ICI interface and only when SVC services are supported. The default value of this object is the null string.
1.3.6.1.4.1.353.5.1.3.1.1.8.1.5DisplayStringread-writecurrent
atmfM4VplTable
OBJECT-TYPE
The ATM Forum M4 VPL Termination Point Configuration table extensions. This table augments the VPL configuration table in RFC 1695.
1.3.6.1.4.1.353.5.1.3.1.1.9not-accessiblecurrent
atmfM4VplEntry
OBJECT-TYPE
Additional columns for the VPL configuration table entry.
1.3.6.1.4.1.353.5.1.3.1.1.9.1not-accessiblecurrent
atmfM4VplSegEndPt
OBJECT-TYPE
Specifies whether the VPL termination point is a segment end-point.
1.3.6.1.4.1.353.5.1.3.1.1.9.1.1TruthValueread-createcurrent
atmfM4VclTable
OBJECT-TYPE
The ATM Forum M4 VCL Termination Point Configuration table extensions. This table augments the VCL configuration table in RFC 1695.
1.3.6.1.4.1.353.5.1.3.1.1.10not-accessiblecurrent
atmfM4VclEntry
OBJECT-TYPE
Additional columns for the VCL configuration table entry.
1.3.6.1.4.1.353.5.1.3.1.1.10.1not-accessiblecurrent
atmfM4VclSegEndPt
OBJECT-TYPE
Specifies whether the VCL termination point is a segment end-point.
1.3.6.1.4.1.353.5.1.3.1.1.10.1.1TruthValueread-createcurrent
atmfM4VpXConnTable
OBJECT-TYPE
The ATM Forum M4 VP Cross-Connect Configuration table extensions. This table augments the VP Cross-Connect configuration table in RFC 1695.
1.3.6.1.4.1.353.5.1.3.1.1.11not-accessiblecurrent
atmfM4VpXConnEntry
OBJECT-TYPE
Additional columns for the VP Cross-Connect table entry.
1.3.6.1.4.1.353.5.1.3.1.1.11.1not-accessiblecurrent
atmfM4VpXConnRecover
OBJECT-TYPE
If FALSE, this cross-connection will be removed on failure.
1.3.6.1.4.1.353.5.1.3.1.1.11.1.1TruthValueread-createcurrent
atmfM4VcXConnTable
OBJECT-TYPE
The ATM Forum M4 VC Cross-Connect Configuration table extensions. This table augments the VC Cross-Connect configuration table in RFC 1695.
1.3.6.1.4.1.353.5.1.3.1.1.12not-accessiblecurrent
atmfM4VcXConnEntry
OBJECT-TYPE
Additional columns for the VC Cross-Connect table entry.
1.3.6.1.4.1.353.5.1.3.1.1.12.1not-accessiblecurrent
atmfM4VcXConnRecover
OBJECT-TYPE
If FALSE, this cross-connection will be removed on failure.
1.3.6.1.4.1.353.5.1.3.1.1.12.1.1TruthValueread-createcurrent
atmfM4VpNextVpiTable
OBJECT-TYPE
The ATM Forum M4 VP Next VPI value table. This optional table supplies unused VPI values for use in creating entries in the atmVplTable.
1.3.6.1.4.1.353.5.1.3.1.1.13not-accessiblecurrent
atmfM4VpNextVpiEntry
OBJECT-TYPE
Each entry in this table represents the 'next' VPI value available for a given ATM interface. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.13.1not-accessiblecurrent
atmfM4VpNextVpiValue
OBJECT-TYPE
This object contains an appropriate value to be used for atmVplVpi when creating entries in the atmVplTable. The value -1 indicates that no unassigned entries are available. To obtain the atmVplVpi value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index (or -1).
1.3.6.1.4.1.353.5.1.3.1.1.13.1.1INTEGER (-1..4095)read-onlycurrent
atmfM4VcNextVciTable
OBJECT-TYPE
The ATM Forum M4 VC Next VCI value table. This optional table supplies unused VCI values for use in creating entries in the atmVclTable.
1.3.6.1.4.1.353.5.1.3.1.1.14not-accessiblecurrent
atmfM4VcNextVciEntry
OBJECT-TYPE
Each entry in this table represents the 'next' VCI value available for a given ATM interface. Each VPL Termination Point automatically has an entry in this table associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.14.1not-accessiblecurrent
atmfM4VcNextVciValue
OBJECT-TYPE
This object contains an appropriate value to be used for atmVclVci when creating entries in the atmVclTable. The value -1 indicates that no unassigned entries are available. To obtain the atmVclVci value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index (or -1).
1.3.6.1.4.1.353.5.1.3.1.1.14.1.1INTEGER (-1..65535)read-onlycurrent
atmfM4CellProtoCurrTable
OBJECT-TYPE
The ATM Forum M4 Cell Protocol Monitoring Current Data table. This table maintains per-interface statistics for the fifteen-minute interval currently being collected.
1.3.6.1.4.1.353.5.1.3.1.1.15not-accessiblecurrent
atmfM4CellProtoCurrEntry
OBJECT-TYPE
An entry in the ATM Forum M4 Cell Protocol Monitoring Current Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.15.1not-accessiblecurrent
atmfM4CellProtoCurrSuspect
OBJECT-TYPE
If true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.5.1.3.1.1.15.1.1TruthValueread-onlycurrent
atmfM4CellProtoCurrElapsedTime
OBJECT-TYPE
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.5.1.3.1.1.15.1.2TimeIntervalread-onlycurrent
atmfM4CellProtoCurrSupprIntvls
OBJECT-TYPE
This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to the current interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
1.3.6.1.4.1.353.5.1.3.1.1.15.1.3Gauge32read-onlycurrent
atmfM4CellProtoCurrProtoErrors
OBJECT-TYPE
The number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, since the start of this interval.
1.3.6.1.4.1.353.5.1.3.1.1.15.1.4Gauge32read-onlycurrent
atmfM4CellProtoCurrInOAMCells
OBJECT-TYPE
The number of OAM cells received at this interface since the start of this interval.
1.3.6.1.4.1.353.5.1.3.1.1.15.1.5Gauge32read-onlycurrent
atmfM4CellProtoHistTable
OBJECT-TYPE
The ATM Forum M4 Cell Protocol Monitoring History Data table. This table maintains per-interface statistics for previous fifteen-minute intervals.
1.3.6.1.4.1.353.5.1.3.1.1.16not-accessiblecurrent
atmfM4CellProtoHistEntry
OBJECT-TYPE
An entry in the ATM Forum M4 Cell Protocol Monitoring History Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it for each fifteen- minute interval in which statistics are collected for it.
1.3.6.1.4.1.353.5.1.3.1.1.16.1not-accessiblecurrent
atmfM4CellProtoHistIndex
OBJECT-TYPE
A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
1.3.6.1.4.1.353.5.1.3.1.1.16.1.1INTEGER (1..96)not-accessiblecurrent
atmfM4CellProtoHistSuspect
OBJECT-TYPE
If true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.5.1.3.1.1.16.1.2TruthValueread-onlycurrent
atmfM4CellProtoHistElapsedTime
OBJECT-TYPE
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.5.1.3.1.1.16.1.3TimeIntervalread-onlycurrent
atmfM4CellProtoHistSupprIntvls
OBJECT-TYPE
This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to this 'non-all-zeroes' history interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
1.3.6.1.4.1.353.5.1.3.1.1.16.1.4Gauge32read-onlycurrent
atmfM4CellProtoHistProtoErrors
OBJECT-TYPE
The number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, during this interval.
1.3.6.1.4.1.353.5.1.3.1.1.16.1.5Gauge32read-onlycurrent
atmfM4CellProtoHistInOAMCells
OBJECT-TYPE
The number of OAM cells received at this interface during this interval.
1.3.6.1.4.1.353.5.1.3.1.1.16.1.6Gauge32read-onlycurrent
atmfM4CellProtoErrorTable
OBJECT-TYPE
The ATM Forum M4 Cell Protocol Monitoring Error Log table. This table maintains a record of the last error of each type encountered on each interface, as a result of ATM Cell Protocol Monitoring.
1.3.6.1.4.1.353.5.1.3.1.1.17not-accessiblecurrent
atmfM4CellProtoErrorEntry
OBJECT-TYPE
An entry in the ATM Forum M4 Cell Protocol Monitoring Error Log table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it for each error that has occurred since agent start-up.
1.3.6.1.4.1.353.5.1.3.1.1.17.1not-accessiblecurrent
atmfM4CellProtoErrorCode
OBJECT-TYPE
Indicates the type of error for which this entry contains information. The range and interpretation of this error code value is left up to the individual agent implementor.
1.3.6.1.4.1.353.5.1.3.1.1.17.1.1Integer32 (0..2147483647)not-accessiblecurrent
atmfM4CellProtoErrorTime
OBJECT-TYPE
Value of sysUpTime when the error occurred.
1.3.6.1.4.1.353.5.1.3.1.1.17.1.2TimeStampread-onlycurrent
atmfM4CellProtoErrorReason
OBJECT-TYPE
The cell header abnormality type: the reason for discarding the ATM cell (i.e., unassigned VPI/VCI value or VPI/VCI value out of range).
1.3.6.1.4.1.353.5.1.3.1.1.17.1.3INTEGER {unassignedVpiVciValue(1), outOfRangeVpiVciValue(2)}read-onlycurrent
atmfM4CellProtoErrorVpi
OBJECT-TYPE
The VPI value of the discarded cell.
1.3.6.1.4.1.353.5.1.3.1.1.17.1.4INTEGER (0..4095)read-onlycurrent
atmfM4CellProtoErrorVci
OBJECT-TYPE
The VCI value of the discarded cell.
1.3.6.1.4.1.353.5.1.3.1.1.17.1.5INTEGER (0..65535)read-onlycurrent
atmfM4TcProtoCurrTable
OBJECT-TYPE
The ATM Forum M4 TC Adapter Protocol Monitoring Current Data table. This table maintains per-interface statistics for the fifteen-minute interval currently being collected.
1.3.6.1.4.1.353.5.1.3.1.1.18not-accessiblecurrent
atmfM4TcProtoCurrEntry
OBJECT-TYPE
An entry in the ATM Forum M4 TC Adapter Protocol Monitoring Current Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.18.1not-accessiblecurrent
atmfM4TcProtoCurrSuspect
OBJECT-TYPE
If true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.5.1.3.1.1.18.1.1TruthValueread-onlycurrent
atmfM4TcProtoCurrElapsedTime
OBJECT-TYPE
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.5.1.3.1.1.18.1.2TimeIntervalread-onlycurrent
atmfM4TcProtoCurrSupprIntvls
OBJECT-TYPE
This attribute is non-zero only if the ATM NE is suppressing ATM TC Adapter Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to the current interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
1.3.6.1.4.1.353.5.1.3.1.1.18.1.3Gauge32read-onlycurrent
atmfM4TcProtoCurrDiscardHECViol
OBJECT-TYPE
The number of ATM cells discarded on this interface, due to a HEC violation, since the start of this interval.
1.3.6.1.4.1.353.5.1.3.1.1.18.1.4Gauge32read-onlycurrent
atmfM4TcProtoHistTable
OBJECT-TYPE
The ATM Forum M4 TC Adapter Protocol Monitoring History Data table. This table maintains per-interface statistics for previous fifteen-minute intervals.
1.3.6.1.4.1.353.5.1.3.1.1.19not-accessiblecurrent
atmfM4TcProtoHistEntry
OBJECT-TYPE
An entry in the ATM Forum M4 TC Adapter Protocol Monitoring History Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associated with it for each fifteen- minute interval in which statistics are collected for it.
1.3.6.1.4.1.353.5.1.3.1.1.19.1not-accessiblecurrent
atmfM4TcProtoHistIndex
OBJECT-TYPE
A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
1.3.6.1.4.1.353.5.1.3.1.1.19.1.1INTEGER (1..96)not-accessiblecurrent
atmfM4TcProtoHistSuspect
OBJECT-TYPE
If true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.5.1.3.1.1.19.1.2TruthValueread-onlycurrent
atmfM4TcProtoHistElapsedTime
OBJECT-TYPE
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.5.1.3.1.1.19.1.3TimeIntervalread-onlycurrent
atmfM4TcProtoHistSupprIntvls
OBJECT-TYPE
This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to this 'non-all-zeroes' history interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
1.3.6.1.4.1.353.5.1.3.1.1.19.1.4Gauge32read-onlycurrent
atmfM4TcProtoHistDiscardHECViol
OBJECT-TYPE
The number of ATM cells discarded on this interface, due to a HEC violation, during this interval.
1.3.6.1.4.1.353.5.1.3.1.1.19.1.5Gauge32read-onlycurrent
atmfM4VpUpcNpcCurrTable
OBJECT-TYPE
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. This table maintains per-TP statistics for the fifteen-minute interval currently being collected.
1.3.6.1.4.1.353.5.1.3.1.1.20not-accessiblecurrent
atmfM4VpUpcNpcCurrEntry
OBJECT-TYPE
An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. Each VPL Termination Point automatically has an entry in this table associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.20.1not-accessiblecurrent
atmfM4VpUpcNpcCurrSuspect
OBJECT-TYPE
If true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.5.1.3.1.1.20.1.1TruthValueread-onlycurrent
atmfM4VpUpcNpcCurrElapsedTime
OBJECT-TYPE
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.5.1.3.1.1.20.1.2TimeIntervalread-onlycurrent
atmfM4VpUpcNpcCurrSupprIntvls
OBJECT-TYPE
This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to the current interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
1.3.6.1.4.1.353.5.1.3.1.1.20.1.3Gauge32read-onlycurrent
atmfM4VpUpcNpcCurrDiscardedCells
OBJECT-TYPE
The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.5.1.3.1.1.20.1.4Gauge32read-onlycurrent
atmfM4VpUpcNpcCurrDiscardedClp0
OBJECT-TYPE
The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.5.1.3.1.1.20.1.5Gauge32read-onlycurrent
atmfM4VpUpcNpcCurrPassedCells
OBJECT-TYPE
The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.5.1.3.1.1.20.1.6Gauge32read-onlycurrent
atmfM4VpUpcNpcCurrPassedClp0
OBJECT-TYPE
The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.5.1.3.1.1.20.1.7Gauge32read-onlycurrent
atmfM4VpUpcNpcHistTable
OBJECT-TYPE
The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. This table maintains per-interface statistics for previous fifteen-minute intervals.
1.3.6.1.4.1.353.5.1.3.1.1.21not-accessiblecurrent
atmfM4VpUpcNpcHistEntry
OBJECT-TYPE
An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. Each VPL Termination Point automatically has an entry in this table associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.21.1not-accessiblecurrent
atmfM4VpUpcNpcHistIndex
OBJECT-TYPE
A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
1.3.6.1.4.1.353.5.1.3.1.1.21.1.1INTEGER (1..96)not-accessiblecurrent
atmfM4VpUpcNpcHistSuspect
OBJECT-TYPE
If true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.5.1.3.1.1.21.1.2TruthValueread-onlycurrent
atmfM4VpUpcNpcHistElapsedTime
OBJECT-TYPE
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.5.1.3.1.1.21.1.3TimeIntervalread-onlycurrent
atmfM4VpUpcNpcHistSupprIntvls
OBJECT-TYPE
This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to this 'non-all-zeroes' history interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
1.3.6.1.4.1.353.5.1.3.1.1.21.1.4Gauge32read-onlycurrent
atmfM4VpUpcNpcHistDiscardedCells
OBJECT-TYPE
The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.5.1.3.1.1.21.1.5Gauge32read-onlycurrent
atmfM4VpUpcNpcHistDiscardedClp0
OBJECT-TYPE
The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.5.1.3.1.1.21.1.6Gauge32read-onlycurrent
atmfM4VpUpcNpcHistPassedCells
OBJECT-TYPE
The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.5.1.3.1.1.21.1.7Gauge32read-onlycurrent
atmfM4VpUpcNpcHistPassedClp0
OBJECT-TYPE
The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.5.1.3.1.1.21.1.8Gauge32read-onlycurrent
atmfM4VcUpcNpcCurrTable
OBJECT-TYPE
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. This table maintains per-TP statistics for the fifteen-minute interval currently being collected.
1.3.6.1.4.1.353.5.1.3.1.1.22not-accessiblecurrent
atmfM4VcUpcNpcCurrEntry
OBJECT-TYPE
An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. Each VCL Termination Point automatically has an entry in this table associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.22.1not-accessiblecurrent
atmfM4VcUpcNpcCurrSuspect
OBJECT-TYPE
If true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.5.1.3.1.1.22.1.1TruthValueread-onlycurrent
atmfM4VcUpcNpcCurrElapsedTime
OBJECT-TYPE
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.5.1.3.1.1.22.1.2TimeIntervalread-onlycurrent
atmfM4VcUpcNpcCurrSupprIntvls
OBJECT-TYPE
This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to the current interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
1.3.6.1.4.1.353.5.1.3.1.1.22.1.3Gauge32read-onlycurrent
atmfM4VcUpcNpcCurrDiscardedCells
OBJECT-TYPE
The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.5.1.3.1.1.22.1.4Gauge32read-onlycurrent
atmfM4VcUpcNpcCurrDiscardedClp0
OBJECT-TYPE
The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.5.1.3.1.1.22.1.5Gauge32read-onlycurrent
atmfM4VcUpcNpcCurrPassedCells
OBJECT-TYPE
The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.5.1.3.1.1.22.1.6Gauge32read-onlycurrent
atmfM4VcUpcNpcCurrPassedClp0
OBJECT-TYPE
The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.5.1.3.1.1.22.1.7Gauge32read-onlycurrent
atmfM4VcUpcNpcHistTable
OBJECT-TYPE
The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. This table maintains per-interface statistics for previous fifteen-minute intervals.
1.3.6.1.4.1.353.5.1.3.1.1.23not-accessiblecurrent
atmfM4VcUpcNpcHistEntry
OBJECT-TYPE
An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. Each VCL Termination Point automatically has an entry in this table associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.23.1not-accessiblecurrent
atmfM4VcUpcNpcHistIndex
OBJECT-TYPE
A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
1.3.6.1.4.1.353.5.1.3.1.1.23.1.1INTEGER (1..96)not-accessiblecurrent
atmfM4VcUpcNpcHistSuspect
OBJECT-TYPE
If true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.5.1.3.1.1.23.1.2TruthValueread-onlycurrent
atmfM4VcUpcNpcHistElapsedTime
OBJECT-TYPE
Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.5.1.3.1.1.23.1.3TimeIntervalread-onlycurrent
atmfM4VcUpcNpcHistSupprIntvls
OBJECT-TYPE
This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When non-zero, this attribute represents the number of 'all-zeroes' intervals that were suppressed immediately prior to this 'non-all-zeroes' history interval. Note that the suppression of 'all-zeroes' intervals is controlled by the atmfM4NeSuppressZeroStats object.
1.3.6.1.4.1.353.5.1.3.1.1.23.1.4Gauge32read-onlycurrent
atmfM4VcUpcNpcHistDiscardedCells
OBJECT-TYPE
The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.5.1.3.1.1.23.1.5Gauge32read-onlycurrent
atmfM4VcUpcNpcHistDiscardedClp0
OBJECT-TYPE
The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.5.1.3.1.1.23.1.6Gauge32read-onlycurrent
atmfM4VcUpcNpcHistPassedCells
OBJECT-TYPE
The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.5.1.3.1.1.23.1.7Gauge32read-onlycurrent
atmfM4VcUpcNpcHistPassedClp0
OBJECT-TYPE
The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.5.1.3.1.1.23.1.8Gauge32read-onlycurrent
atmfM4TestTypes
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1.3.1.1.24
atmfM4TestOAMLoopbackSeg
OBJECT-IDENTITY
This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using a segment OAM cell. The test type must have appended to it a code that uniquely identifies an intermediate point responsible for looping back the cell. If this is absent, the loopback is performed at the end of the segment or connection. E.g., the OID { atmfM4TestOAMLoopbackSeg 5 } identifies that the loopback should be performed at the intermediate point labeled 5.
1.3.6.1.4.1.353.5.1.3.1.1.24.1current
atmfM4TestOAMLoopbackE2E
OBJECT-IDENTITY
This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using an end-to-end OAM cell.
1.3.6.1.4.1.353.5.1.3.1.1.24.2current
atmfM4VpTestTable
OBJECT-TYPE
The ATM Forum M4 VP Termination Point Test table. This table allows tests to be run on VPL and VPC termination points. The operation of this table is entirely analogous to that of the ifTestTable in RFC 1573 (which was later deprecated in RFC 2233), except that the indexes into this table are different.
1.3.6.1.4.1.353.5.1.3.1.1.25not-accessiblecurrent
atmfM4VpTestEntry
OBJECT-TYPE
An entry containing objects for invoking tests on a VPL or VPC termination point.
1.3.6.1.4.1.353.5.1.3.1.1.25.1not-accessiblecurrent
atmfM4VpTestObject
OBJECT-TYPE
Specifies whether the test applies to the VPL termination point with the specified VPI, or the VPC termination point.
1.3.6.1.4.1.353.5.1.3.1.1.25.1.1INTEGER {vplTp(1), vpcTp(2)}not-accessiblecurrent
atmfM4VpTestId
OBJECT-TYPE
This object identifies the current invocation of the interface's test.
1.3.6.1.4.1.353.5.1.3.1.1.25.1.2TestAndIncrread-writecurrent
atmfM4VpTestStatus
OBJECT-TYPE
This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'.
1.3.6.1.4.1.353.5.1.3.1.1.25.1.3INTEGER {notInUse(1), inUse(2)}read-writecurrent
atmfM4VpTestType
OBJECT-TYPE
A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that atmfM4VpTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
1.3.6.1.4.1.353.5.1.3.1.1.25.1.4AutonomousTyperead-writecurrent
atmfM4VpTestResult
OBJECT-TYPE
This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
1.3.6.1.4.1.353.5.1.3.1.1.25.1.5INTEGER {none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7)}read-onlycurrent
atmfM4VpTestCode
OBJECT-TYPE
This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or RowPointer textual conventions as defined in RFC 1903 [15]. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
1.3.6.1.4.1.353.5.1.3.1.1.25.1.6OBJECT IDENTIFIERread-onlycurrent
atmfM4VpTestOwner
OBJECT-TYPE
The entity which currently has the 'ownership' required to invoke a test on this interface.
1.3.6.1.4.1.353.5.1.3.1.1.25.1.7OwnerStringread-writecurrent
atmfM4VcTestTable
OBJECT-TYPE
The ATM Forum M4 VC Termination Point Test table. This table allows tests to be run on VCL and VCC termination points. The operation of this table is entirely analogous to that of the ifTestTable in RFC 1573 (which was later deprecated in RFC 2233), except that the indexes into this table are different.
1.3.6.1.4.1.353.5.1.3.1.1.26not-accessiblecurrent
atmfM4VcTestEntry
OBJECT-TYPE
An entry containing objects for invoking tests on a VCL or VCC termination point.
1.3.6.1.4.1.353.5.1.3.1.1.26.1not-accessiblecurrent
atmfM4VcTestObject
OBJECT-TYPE
Specifies whether the test applies to the VCL termination point with the specified VPI and VCI values, or to the VCC termination point.
1.3.6.1.4.1.353.5.1.3.1.1.26.1.1INTEGER {vclTp(1), vccTp(2)}not-accessiblecurrent
atmfM4VcTestId
OBJECT-TYPE
This object identifies the current invocation of the interface's test.
1.3.6.1.4.1.353.5.1.3.1.1.26.1.2TestAndIncrread-writecurrent
atmfM4VcTestStatus
OBJECT-TYPE
This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'.
1.3.6.1.4.1.353.5.1.3.1.1.26.1.3INTEGER {notInUse(1), inUse(2)}read-writecurrent
atmfM4VcTestType
OBJECT-TYPE
A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that atmfM4VcTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
1.3.6.1.4.1.353.5.1.3.1.1.26.1.4AutonomousTyperead-writecurrent
atmfM4VcTestResult
OBJECT-TYPE
This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
1.3.6.1.4.1.353.5.1.3.1.1.26.1.5INTEGER {none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7)}read-onlycurrent
atmfM4VcTestCode
OBJECT-TYPE
This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or RowPointer textual conventions as defined in RFC 1903 [15]. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
1.3.6.1.4.1.353.5.1.3.1.1.26.1.6OBJECT IDENTIFIERread-onlycurrent
atmfM4VcTestOwner
OBJECT-TYPE
The entity which currently has the 'ownership' required to invoke a test on this termination point.
1.3.6.1.4.1.353.5.1.3.1.1.26.1.7OwnerStringread-writecurrent
atmfM4EquipTable
OBJECT-TYPE
The ATM Forum M4 Equipment table. This table augments the entPhysicalTable.
1.3.6.1.4.1.353.5.1.3.1.1.28not-accessiblecurrent
atmfM4EquipEntry
OBJECT-TYPE
An entry in the ATM Forum M4 Equipment table. Each entry of this table represents a piece of equipment within the ATM NE that neither is nor accepts a replaceable plug-in unit.
1.3.6.1.4.1.353.5.1.3.1.1.28.1not-accessiblecurrent
atmfM4EquipAdminStatus
OBJECT-TYPE
Used by the administrator to lock and unlock the object.
1.3.6.1.4.1.353.5.1.3.1.1.28.1.1INTEGER {up(1), down(2)}read-writecurrent
atmfM4EquipLocation
OBJECT-TYPE
The specific or general location of the component.
1.3.6.1.4.1.353.5.1.3.1.1.28.1.2DisplayStringread-writecurrent
atmfM4EquipOperStatus
OBJECT-TYPE
This attributes identifies whether or not the component is capable of performing its normal functions.
1.3.6.1.4.1.353.5.1.3.1.1.28.1.3INTEGER {up(1), down(2), unknown(3)}read-onlycurrent
atmfM4EquipVendor
OBJECT-TYPE
The vendor of the component.
1.3.6.1.4.1.353.5.1.3.1.1.28.1.4DisplayStringread-onlycurrent
atmfM4EquipVersion
OBJECT-TYPE
The version of the component.
1.3.6.1.4.1.353.5.1.3.1.1.28.1.5AutonomousTyperead-onlycurrent
atmfM4EquipUserLabel
OBJECT-TYPE
A user-friendly name for the piece of equipment. The default value of this object is the null string.
1.3.6.1.4.1.353.5.1.3.1.1.28.1.6DisplayStringread-writecurrent
atmfM4EquipAlarmSeverityIndex
OBJECT-TYPE
An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component. The default value of this object is zero.
1.3.6.1.4.1.353.5.1.3.1.1.28.1.7Integer32read-writecurrent
atmfM4EquipHolderTable
OBJECT-TYPE
The ATM Forum M4 Equipment Holder table. This table augments the entPhysicalTable.
1.3.6.1.4.1.353.5.1.3.1.1.29not-accessiblecurrent
atmfM4EquipHolderEntry
OBJECT-TYPE
An entry in the ATM Forum M4 Equipment Holder table. Each entry of this table represents a component within the ATM NE that accepts a replaceable plug-in unit.
1.3.6.1.4.1.353.5.1.3.1.1.29.1not-accessiblecurrent
atmfM4EquipHolderType
OBJECT-TYPE
The type of the component.
1.3.6.1.4.1.353.5.1.3.1.1.29.1.1INTEGER {rack(1), shelf(2), drawer(3), slot(4)}read-onlycurrent
atmfM4EquipHolderAcceptableTypes
OBJECT-TYPE
The types of plug-in units that can be supported by the slot, separated by newline characters. This attribute shall be present only when the Equipment Holder represents a slot.
1.3.6.1.4.1.353.5.1.3.1.1.29.1.2DisplayStringread-onlycurrent
atmfM4EquipHolderSlotStatus
OBJECT-TYPE
This attributes identifies whether or not a plug-in unit is present in the slot. This attribute shall be present only when the Equipment Holder represents a slot.
1.3.6.1.4.1.353.5.1.3.1.1.29.1.3INTEGER {empty(1), full(2)}read-onlycurrent
atmfM4EquipHolderSwLoad
OBJECT-TYPE
An index into the installed software table, specifying the software that is to be loaded into the plug-in unit whenever an automatic reload of software is needed. This attribute shall be present only when the Equipment Holder represents a slot.
1.3.6.1.4.1.353.5.1.3.1.1.29.1.4INTEGER (1..2147483647)read-writecurrent
atmfM4PlugInUnitTable
OBJECT-TYPE
The ATM Forum M4 Plug-In Unit table. This table augments the entPhysicalTable.
1.3.6.1.4.1.353.5.1.3.1.1.30not-accessiblecurrent
atmfM4PlugInUnitEntry
OBJECT-TYPE
An entry in the ATM Forum M4 Plug-In Unit table. Each entry of this table represents a piece of equipment within the ATM NE that is inserted into and removed from an Equipment Holder.
1.3.6.1.4.1.353.5.1.3.1.1.30.1not-accessiblecurrent
atmfM4PlugInUnitAdminStatus
OBJECT-TYPE
Used by the administrator to lock and unlock the object.
1.3.6.1.4.1.353.5.1.3.1.1.30.1.1INTEGER {up(1), down(2)}read-writecurrent
atmfM4PlugInUnitAvailStatus
OBJECT-TYPE
Provides further information regarding the state of the component.
1.3.6.1.4.1.353.5.1.3.1.1.30.1.2INTEGER {available(1), inTest(2), failed(3), powerOff(4), notInstalled(5), offLine(6), dependency(7)}read-onlycurrent
atmfM4PlugInUnitOperStatus
OBJECT-TYPE
This attributes identifies whether or not the component is capable of performing its normal functions.
1.3.6.1.4.1.353.5.1.3.1.1.30.1.3INTEGER {up(1), down(2), unknown(3)}read-onlycurrent
atmfM4PlugInUnitVendor
OBJECT-TYPE
The vendor of the component.
1.3.6.1.4.1.353.5.1.3.1.1.30.1.4DisplayStringread-onlycurrent
atmfM4PlugInUnitVersion
OBJECT-TYPE
The version of the component.
1.3.6.1.4.1.353.5.1.3.1.1.30.1.5AutonomousTyperead-onlycurrent
atmfM4PlugInUnitAlarmSeverityIndex
OBJECT-TYPE
An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component. The default value of this object is zero.
1.3.6.1.4.1.353.5.1.3.1.1.30.1.6Integer32read-writecurrent
atmfM4HwRunningSwTable
OBJECT-TYPE
The ATM Forum M4 Hardware Unit/Running Software relationship table. This table describes the software that is running on each hardware unit in the ATM NE.
1.3.6.1.4.1.353.5.1.3.1.1.32not-accessiblecurrent
atmfM4HwRunningSwEntry
OBJECT-TYPE
An entry in the ATM Forum M4 Hardware Unit/Running Software relationship table. Each entry of this table identifies an entry in the entPhysicalTable and one in the hrSWRunTable.
1.3.6.1.4.1.353.5.1.3.1.1.32.1not-accessiblecurrent
atmfM4HwRunningSwHwIndex
OBJECT-TYPE
The index, in the entPhysicalTable, of the containing hardware unit in this pair.
1.3.6.1.4.1.353.5.1.3.1.1.32.1.1INTEGER (1..2147483647)not-accessiblecurrent
atmfM4HwRunningSwIndex
OBJECT-TYPE
A unique number within the context of the containing hardware unit.
1.3.6.1.4.1.353.5.1.3.1.1.32.1.2INTEGER (1..2147483647)not-accessiblecurrent
atmfM4HwRunningSwSwIndex
OBJECT-TYPE
The index, in the hrSWRunTable, of the software product represented by this entry.
1.3.6.1.4.1.353.5.1.3.1.1.32.1.3INTEGER (1..2147483647)read-onlycurrent
atmfM4HwInstalledSwTable
OBJECT-TYPE
The ATM Forum M4 Hardware Unit/Installed Software relationship table. This table describes the software that is installed on each hardware unit in the ATM NE.
1.3.6.1.4.1.353.5.1.3.1.1.33not-accessiblecurrent
atmfM4HwInstalledSwEntry
OBJECT-TYPE
An entry in the ATM Forum M4 Hardware Unit/Installed Software relationship table. Each entry of this table identifies an entry in the entPhysicalTable and one in the hrSWInstalledTable.
1.3.6.1.4.1.353.5.1.3.1.1.33.1not-accessiblecurrent
atmfM4HwInstalledSwHwIndex
OBJECT-TYPE
The index, in the entPhysicalTable, of the containing physical entity in this pair.
1.3.6.1.4.1.353.5.1.3.1.1.33.1.1INTEGER (1..2147483647)not-accessiblecurrent
atmfM4HwInstalledSwIndex
OBJECT-TYPE
A unique number within the context of the containing hardware unit.
1.3.6.1.4.1.353.5.1.3.1.1.33.1.2INTEGER (1..2147483647)not-accessiblecurrent
atmfM4HwInstalledSwSwIndex
OBJECT-TYPE
The index, in the hrSWInstalledTable, of the software product represented by this entry.
1.3.6.1.4.1.353.5.1.3.1.1.33.1.3INTEGER (1..2147483647)read-onlycurrent
atmfM4HwSwAlarmSeverityIndex
OBJECT-TYPE
An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this piece of software installed on the hardware unit. The default value of this object is zero.
1.3.6.1.4.1.353.5.1.3.1.1.33.1.4Integer32read-writecurrent
atmfM4AlarmSevDefault
OBJECT-TYPE
The default severity value used for new profile index/trap ID pairs that have not yet been modified. This value is also used whenever an object's alarm severity profile index is set to 0. The default value of this object is minor(3).
1.3.6.1.4.1.353.5.1.3.1.1.34AtmfM4AlarmSeverityread-writecurrent
atmfM4AlarmSevProfileIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for atmfM4AlarmSevProfileIndex when creating entries in the atmfM4AlarmSevProfileTable. The value -1 indicates that no unassigned entries are available. To obtain the index value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index (or -1).
1.3.6.1.4.1.353.5.1.3.1.1.35Integer32read-onlycurrent
atmfM4AlarmSevProfileTable
OBJECT-TYPE
The ATM Forum M4 alarm severity profile table. This table specifies which profiles exist. Creating or deleting an entry in this table automatically creates or deletes the corresponding entries in the atmfM4AlarmSeverityTable.
1.3.6.1.4.1.353.5.1.3.1.1.36not-accessiblecurrent
atmfM4AlarmSevProfileEntry
OBJECT-TYPE
A group of severities, one for each alarm type in the communications alarm group.
1.3.6.1.4.1.353.5.1.3.1.1.36.1not-accessiblecurrent
atmfM4AlarmSevProfileIndex
OBJECT-TYPE
A number identifying this alarm severity profile.
1.3.6.1.4.1.353.5.1.3.1.1.36.1.1Integer32 (1..2147483647)not-accessiblecurrent
atmfM4AlarmSevProfileRowStatus
OBJECT-TYPE
This object is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.353.5.1.3.1.1.36.1.2RowStatusread-createcurrent
atmfM4AlarmSevTable
OBJECT-TYPE
The ATM Forum M4 alarm severity table. This table associates profile index and trap ID pairs with severities to be used for M4 alarm traps that have occurred. (Note that this table does not apply to cleared alarms.)
1.3.6.1.4.1.353.5.1.3.1.1.37not-accessiblecurrent
atmfM4AlarmSevEntry
OBJECT-TYPE
An entry in this table associates an alarm severity profile index/trap ID pair with a severity. Deleting a particular profile's row in the alarm severity profile table deletes all rows in this table with the same profile index. Conceptually, rows corresponding to all possible trap ID's are created in this table when a new alarm severity profile is created, but the agent will return a default value except for those few traps for which values have been set.
1.3.6.1.4.1.353.5.1.3.1.1.37.1not-accessiblecurrent
atmfM4AlarmSevTrapId
OBJECT-TYPE
The ID of the trap type to which this entry applies.
1.3.6.1.4.1.353.5.1.3.1.1.37.1.1OBJECT IDENTIFIERnot-accessiblecurrent
atmfM4AlarmSeverity
OBJECT-TYPE
The severity to be used for this trap type when the TrapId is selected. If no value for this object has ever been set since the corresponding profile was created, the agent should return the value of the object atmfM4AlarmSevDefault.
1.3.6.1.4.1.353.5.1.3.1.1.37.1.2AtmfM4AlarmSeverityread-createcurrent
atmfM4ForwardAllTraps
OBJECT-IDENTITY
This is used as the value of the object atmfM4ForwardedTrapObject when traps from all objects are to be forwarded, or when there is only one object of the type that forwards the specified trap type.
1.3.6.1.4.1.353.5.1.3.1.1.38current
atmfM4TrapForwardingTable
OBJECT-TYPE
The ATM Forum M4 Trap forwarding discriminator table. This table specifies which traps will be sent to which management system.
1.3.6.1.4.1.353.5.1.3.1.1.39not-accessiblecurrent
atmfM4TrapForwardingEntry
OBJECT-TYPE
Information about a group of traps to be sent to a particular IP address. A new entry must have values for all attributes that do not have default values before its RowStatus column can be set to active(1).
1.3.6.1.4.1.353.5.1.3.1.1.39.1not-accessiblecurrent
atmfM4TrapForwardingIndex
OBJECT-TYPE
A unique number identifying the table entry.
1.3.6.1.4.1.353.5.1.3.1.1.39.1.1Integer32 (1..2147483647)not-accessiblecurrent
atmfM4TrapForwardingDest
OBJECT-TYPE
The IP address to which traps identified by this table entry should be sent.
1.3.6.1.4.1.353.5.1.3.1.1.39.1.2IpAddressread-createcurrent
atmfM4ForwardedTrapId
OBJECT-TYPE
The ID of the trap type to which this entry applies.
1.3.6.1.4.1.353.5.1.3.1.1.39.1.3OBJECT IDENTIFIERread-createcurrent
atmfM4ForwardedTrapObject
OBJECT-TYPE
The object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. The special value { 0 0 } indicates that traps of this type from all objects of the type that can generate it. It should also be used when traps from the ATM NE are to be specified.
1.3.6.1.4.1.353.5.1.3.1.1.39.1.4RowPointerread-createcurrent
atmfM4TrapForwardingPort
OBJECT-TYPE
The UDP port on the specified management system to which traps identified by this entry should be sent.
1.3.6.1.4.1.353.5.1.3.1.1.39.1.5Integer32read-createcurrent
atmfM4LowestForwardedSeverity
OBJECT-TYPE
The lowest severity of traps of this type from the specified object that should be sent to this address. This object has significance only if the trap type specified has a severity associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.39.1.6AtmfM4AlarmSeverityread-createcurrent
atmfM4ForwardedIndeterminate
OBJECT-TYPE
When this object has the value TRUE, traps with indeterminate severity will be forwarded to the specified event. This object has significance only if the trap type specified has a severity associated with it.
1.3.6.1.4.1.353.5.1.3.1.1.39.1.7TruthValueread-createcurrent
atmfM4TrapForwardingRowStatus
OBJECT-TYPE
This object is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.353.5.1.3.1.1.39.1.8RowStatusread-createcurrent
atmfM4TrapLogTable
OBJECT-TYPE
The ATM Forum M4 Trap Agent log table. This table defines the trap logs currently maintained by the agent. The management system creates entries in this table to specify which types of traps, from which ATM network elements, should be logged. Deleting an entry in this table deletes all entries in the corresponding log.
1.3.6.1.4.1.353.5.1.3.1.1.40not-accessiblecurrent
atmfM4TrapLogEntry
OBJECT-TYPE
Information about a single trap log.
1.3.6.1.4.1.353.5.1.3.1.1.40.1not-accessiblecurrent
atmfM4TrapLogSrc
OBJECT-TYPE
The IP address of the SNMP agent whose traps are stored in this log.
1.3.6.1.4.1.353.5.1.3.1.1.40.1.1IpAddressnot-accessiblecurrent
atmfM4TrapLogType
OBJECT-TYPE
The type of traps stored in this log.
1.3.6.1.4.1.353.5.1.3.1.1.40.1.2INTEGER {objectCreated(1), objectDeleted(2), configChange(3), stateChange(4), alarm(5)}not-accessiblecurrent
atmfM4TrapLogAdminStatus
OBJECT-TYPE
The management system uses this object to stop and start the operations of this object.
1.3.6.1.4.1.353.5.1.3.1.1.40.1.3INTEGER {up(1), down(2)}read-createcurrent
atmfM4TrapLogOperStatus
OBJECT-TYPE
Indicates whether or not the log is capable of performing its normal operations.
1.3.6.1.4.1.353.5.1.3.1.1.40.1.4INTEGER {up(1), down(2), logFull(3)}read-onlycurrent
atmfM4TrapLogFullAction
OBJECT-TYPE
Indicates the action that should be performed when no more log entries can be created due to a log-full condition. If the value of this object is wrap(2), each new log entry will cause the deletion of the oldest entry still in the log, for as long as the log is still full.
1.3.6.1.4.1.353.5.1.3.1.1.40.1.5INTEGER {halt(1), wrap(2)}read-createcurrent
atmfM4TrapLogRowStatus
OBJECT-TYPE
This object is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.353.5.1.3.1.1.40.1.6RowStatusread-createcurrent
atmfM4LoggedTrapTable
OBJECT-TYPE
The ATM Forum M4 Trap Agent logged trap table. This table is used to maintain the traps logged.
1.3.6.1.4.1.353.5.1.3.1.1.41not-accessiblecurrent
atmfM4LoggedTrapEntry
OBJECT-TYPE
Information about a single trap in the log. Entries in this table are created automatically but can be deleted by the management system. Entries that represent 'alarm' log types are augmented by the atmfM4LoggedAlarmEntry table.
1.3.6.1.4.1.353.5.1.3.1.1.41.1not-accessiblecurrent
atmfM4LoggedTrapIndex
OBJECT-TYPE
A unique number identifying this entry in the log. When the maximum value for this object has been reached, it will wrap around to 0.
1.3.6.1.4.1.353.5.1.3.1.1.41.1.1Unsigned32not-accessiblecurrent
atmfM4LoggedTrapTime
OBJECT-TYPE
The time at which this trap was logged.
1.3.6.1.4.1.353.5.1.3.1.1.41.1.2DateAndTimeread-onlycurrent
atmfM4LoggedTrapID
OBJECT-TYPE
The type of trap to which this entry applies. Together with the logged trap ID object, this object specifies the entity to which this logged trap referred.
1.3.6.1.4.1.353.5.1.3.1.1.41.1.3Integer32read-onlycurrent
atmfM4LoggedTrapObject
OBJECT-TYPE
The object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. Together with the logged trap ID object, this object specifies the entity to which this logged trap referred. The special value { 0 0 } indicates that the trap refers to the ATM NE entity itself.
1.3.6.1.4.1.353.5.1.3.1.1.41.1.4RowPointerread-onlycurrent
atmfM4LoggedTrapRowStatus
OBJECT-TYPE
This object is used to delete an existing row in the table. Note that the only value to which a management system can set this object is destroy(6).
1.3.6.1.4.1.353.5.1.3.1.1.41.1.5RowStatusread-writecurrent
atmfM4LoggedAlarmTable
OBJECT-TYPE
The ATM Forum M4 Trap Agent logged alarm trap table. This table is used to maintain extra information for logged traps that represent alarm types.
1.3.6.1.4.1.353.5.1.3.1.1.42not-accessiblecurrent
atmfM4LoggedAlarmEntry
OBJECT-TYPE
Information about the alarm-specific attributes of a single trap in the log.
1.3.6.1.4.1.353.5.1.3.1.1.42.1not-accessiblecurrent
atmfM4LoggedAlarmSeverity
OBJECT-TYPE
The perceived severity of the alarm, as specified by the agent that generated it.
1.3.6.1.4.1.353.5.1.3.1.1.42.1.1AtmfM4AlarmLogSeverityread-onlycurrent
atmfM4LoggedAlarmBackedUp
OBJECT-TYPE
If the value of this object is true, the agent reported in this trap that the failed object had been backed up. This object is only present if it was included in the alarm trap corresponding to this log entry.
1.3.6.1.4.1.353.5.1.3.1.1.42.1.2TruthValueread-onlycurrent
atmfM4LoggedAlarmBUObject
OBJECT-TYPE
Indicates the object that provided back-up services to the failed object. This object is only present if it was included in the alarm trap corresponding to this log entry.
1.3.6.1.4.1.353.5.1.3.1.1.42.1.3RowPointerread-onlycurrent
atmfM4LoggedAlarmSpecificProb
OBJECT-TYPE
Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by newline characters. This object is only present if it was included in the alarm trap corresponding to this log entry.
1.3.6.1.4.1.353.5.1.3.1.1.42.1.4DisplayStringread-onlycurrent
atmfM4LoggedAlarmRepairAct
OBJECT-TYPE
Indicates proposed repair actions reported by the agent for the problem identified by the alarm. If more than one action is described in this object, the problem descriptions are separated by newline characters. This object is only present if it was included in the alarm trap corresponding to this log entry.
1.3.6.1.4.1.353.5.1.3.1.1.42.1.5DisplayStringread-onlycurrent
atmfM4TrapAlarmSeverity
OBJECT-TYPE
The perceived severity of the alarm, as specified by the agent that generated it.
1.3.6.1.4.1.353.5.1.3.1.1.43AtmfM4AlarmLogSeverityaccessible-for-notifycurrent
atmfM4TrapAlarmBackedUp
OBJECT-TYPE
If the value of this object is true, the failed object has been backed up.
1.3.6.1.4.1.353.5.1.3.1.1.44TruthValueaccessible-for-notifycurrent
atmfM4TrapAlarmBUObject
OBJECT-TYPE
Indicates the object that provided back-up services to the failed object.
1.3.6.1.4.1.353.5.1.3.1.1.45RowPointeraccessible-for-notifycurrent
atmfM4TrapAlarmSpecificProb
OBJECT-TYPE
Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by newline characters.
1.3.6.1.4.1.353.5.1.3.1.1.46DisplayStringaccessible-for-notifycurrent
atmfM4TrapAlarmRepairAct
OBJECT-TYPE
Indicates proposed repair actions reported by the agent for the problem identified by the alarm. If more than one action is described in this object, the problem descriptions are separated by newline characters.
1.3.6.1.4.1.353.5.1.3.1.1.47DisplayStringaccessible-for-notifycurrent
atmfM4MIBTraps
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1.3.1.2
atmfM4MIBTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1.3.1.2.0
atmfM4MIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1.3.1.3
atmfM4Groups
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1.3.1.3.1
atmfM4Compliances
OBJECT-IDENTITY
1.3.6.1.4.1.353.5.1.3.1.3.2

Notifications

NameOIDStatus
atmfM4IfAisAlarm
NOTIFICATION-TYPE
Indicates that an AIS alarm condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.1current
atmfM4IfLcdAlarm
NOTIFICATION-TYPE
Indicates that an LCD (Loss of Cell Delineation) condition has occurred on the TC Adapter associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.2current
atmfM4IfLofAlarm
NOTIFICATION-TYPE
Indicates that an LOF (Loss of Frame) condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.3current
atmfM4IfLopAlarm
NOTIFICATION-TYPE
Indicates that an LOP (Loss of Pointer) condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.4current
atmfM4IfLosAlarm
NOTIFICATION-TYPE
Indicates that an LOS (Loss of Signal) condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.5current
atmfM4IfPayloadMismatchAlarm
NOTIFICATION-TYPE
Indicates that a payload type mismatch condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.6current
atmfM4IfXmissionErrAlarm
NOTIFICATION-TYPE
Indicates that an transmission error condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.7current
atmfM4IfPathTraceMismatchAlarm
NOTIFICATION-TYPE
Indicates that path trace mismatch condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.8current
atmfM4IfRdiAlarm
NOTIFICATION-TYPE
Indicates that an RDI (Remote Defect Indication) condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.9current
atmfM4IfSignalLabelMismatchAlarm
NOTIFICATION-TYPE
Indicates that a signal label mismatch has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.10current
atmfM4VplTpAisAlarm
NOTIFICATION-TYPE
Indicates that an AIS alarm condition has occurred on the VPL TP associated with the specified interface and VPI.
1.3.6.1.4.1.353.5.1.3.1.2.0.11current
atmfM4VplTpRdiAlarm
NOTIFICATION-TYPE
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VPL TP associated with the specified interface and VPI.
1.3.6.1.4.1.353.5.1.3.1.2.0.12current
atmfM4VpcTpAisAlarm
NOTIFICATION-TYPE
Indicates that an AIS alarm condition has occurred on the VPC TP associated with the specified interface and VPI.
1.3.6.1.4.1.353.5.1.3.1.2.0.13current
atmfM4VpcTpRdiAlarm
NOTIFICATION-TYPE
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VPC TP associated with the specified interface and VPI.
1.3.6.1.4.1.353.5.1.3.1.2.0.14current
atmfM4VclTpAisAlarm
NOTIFICATION-TYPE
Indicates that an AIS alarm condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI.
1.3.6.1.4.1.353.5.1.3.1.2.0.15current
atmfM4VclTpRdiAlarm
NOTIFICATION-TYPE
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI.
1.3.6.1.4.1.353.5.1.3.1.2.0.16current
atmfM4VccTpAisAlarm
NOTIFICATION-TYPE
Indicates that an AIS alarm condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI.
1.3.6.1.4.1.353.5.1.3.1.2.0.17current
atmfM4VccTpRdiAlarm
NOTIFICATION-TYPE
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI.
1.3.6.1.4.1.353.5.1.3.1.2.0.18current
atmfM4HwBackPlaneAlarm
NOTIFICATION-TYPE
Indicates that a back-plane failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.19current
atmfM4HwCallEstErrAlarm
NOTIFICATION-TYPE
Indicates that a call establishment error condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.20current
atmfM4HwCongestionAlarm
NOTIFICATION-TYPE
Indicates that a congestion condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.21current
atmfM4HwExtIfDevProbAlarm
NOTIFICATION-TYPE
Indicates that an external interface device problem has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.22current
atmfM4HwLineCardAlarm
NOTIFICATION-TYPE
Indicates that a line-card problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.23current
atmfM4HwMultiplexerAlarm
NOTIFICATION-TYPE
Indicates that a multiplexer problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.24current
atmfM4HwPowerAlarm
NOTIFICATION-TYPE
Indicates that a power problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.25current
atmfM4HwProcessorAlarm
NOTIFICATION-TYPE
Indicates that a processor problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.26current
atmfM4HwProtectionPathAlarm
NOTIFICATION-TYPE
Indicates that a protection path problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.27current
atmfM4HwReceiverFailAlarm
NOTIFICATION-TYPE
Indicates that a receiver failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.28current
atmfM4HwPIUnitMissingAlarm
NOTIFICATION-TYPE
Indicates that a plug-in unit missing condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.29current
atmfM4HwPIUnitProbAlarm
NOTIFICATION-TYPE
Indicates that a plug-in unit problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.30current
atmfM4HwPIUnitMismatchAlarm
NOTIFICATION-TYPE
Indicates that a plug-in unit type mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.31current
atmfM4HwTimingProbAlarm
NOTIFICATION-TYPE
Indicates that a timing problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.32current
atmfM4HwXmitterFailAlarm
NOTIFICATION-TYPE
Indicates that a transmitter failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.33current
atmfM4HwTrunkCardAlarm
NOTIFICATION-TYPE
Indicates that a trunk-card problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.34current
atmfM4HwStorageCapacityAlarm
NOTIFICATION-TYPE
Indicates that a storage capacity problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.35current
atmfM4HwMemoryMismatchAlarm
NOTIFICATION-TYPE
Indicates that a memory mismatch alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.36current
atmfM4HwCorruptDataAlarm
NOTIFICATION-TYPE
Indicates that a corrupt data alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.37current
atmfM4HwSwEnvironAlarm
NOTIFICATION-TYPE
Indicates that a software environment problem has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.38current
atmfM4HwSwDownloadFailAlarm
NOTIFICATION-TYPE
Indicates that a software download failure has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.39current
atmfM4HwVersionMismatchAlarm
NOTIFICATION-TYPE
Indicates that a version mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.40current
atmfM4HwFanFailAlarm
NOTIFICATION-TYPE
Indicates that a cooling fan failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.41current
atmfM4HwDoorOpenAlarm
NOTIFICATION-TYPE
Indicates that an enclosure door open condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.42current
atmfM4HwFuseFailAlarm
NOTIFICATION-TYPE
Indicates that a fuse failure alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.43current
atmfM4HwHighTempAlarm
NOTIFICATION-TYPE
Indicates that a high temperature condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.44current
atmfM4SwVersionMismatchAlarm
NOTIFICATION-TYPE
Indicates that a version mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table.
1.3.6.1.4.1.353.5.1.3.1.2.0.45current
atmfM4VplTpUp
NOTIFICATION-TYPE
Indicates that the operational state of the specified VPL termination point has transitioned to 'up'.
1.3.6.1.4.1.353.5.1.3.1.2.0.46current
atmfM4VplTpDown
NOTIFICATION-TYPE
Indicates that the operational state of the specified VPL termination point has transitioned to 'down'.
1.3.6.1.4.1.353.5.1.3.1.2.0.47current
atmfM4VclTpUp
NOTIFICATION-TYPE
Indicates that the operational state of the specified VCL termination point has transitioned to 'up'.
1.3.6.1.4.1.353.5.1.3.1.2.0.48current
atmfM4VclTpDown
NOTIFICATION-TYPE
Indicates that the operational state of the specified VCL termination point has transitioned to 'down'.
1.3.6.1.4.1.353.5.1.3.1.2.0.49current
atmfM4VplXConnUp
NOTIFICATION-TYPE
Indicates that the operational state of the specified VPL cross-connection has transitioned to 'up'.
1.3.6.1.4.1.353.5.1.3.1.2.0.50current
atmfM4VplXConnDown
NOTIFICATION-TYPE
Indicates that the operational state of the specified VPL cross-connection has transitioned to 'down'.
1.3.6.1.4.1.353.5.1.3.1.2.0.51current
atmfM4VclXConnUp
NOTIFICATION-TYPE
Indicates that the operational state of the specified VCL cross-connection has transitioned to 'up'.
1.3.6.1.4.1.353.5.1.3.1.2.0.52current
atmfM4VclXConnDown
NOTIFICATION-TYPE
Indicates that the operational state of the specified VCL cross-connection has transitioned to 'down'.
1.3.6.1.4.1.353.5.1.3.1.2.0.53current
atmfM4HwUnitUp
NOTIFICATION-TYPE
Indicates that the operational state of the specified hardware unit has transitioned to 'up'.
1.3.6.1.4.1.353.5.1.3.1.2.0.54current
atmfM4HwUnitDown
NOTIFICATION-TYPE
Indicates that the operational state of the specified hardware unit has transitioned to 'down'.
1.3.6.1.4.1.353.5.1.3.1.2.0.55current
atmfM4AtmCellIfCreated
NOTIFICATION-TYPE
Indicates that an ATM cell layer interface has just been created on the interface.
1.3.6.1.4.1.353.5.1.3.1.2.0.56current
atmfM4AtmCellIfDeleted
NOTIFICATION-TYPE
Indicates that the ATM cell layer interface has just been deleted.
1.3.6.1.4.1.353.5.1.3.1.2.0.57current
atmfM4VpcTpCreated
NOTIFICATION-TYPE
Indicates that the VPC termination point has just been created.
1.3.6.1.4.1.353.5.1.3.1.2.0.58current
atmfM4VpcTpDeleted
NOTIFICATION-TYPE
Indicates that the VPC termination point has just been deleted.
1.3.6.1.4.1.353.5.1.3.1.2.0.59current
atmfM4VccTpCreated
NOTIFICATION-TYPE
Indicates that the VCC termination point has just been created.
1.3.6.1.4.1.353.5.1.3.1.2.0.60current
atmfM4VccTpDeleted
NOTIFICATION-TYPE
Indicates that the VCC termination point has just been deleted.
1.3.6.1.4.1.353.5.1.3.1.2.0.61current
atmfM4VplXConnCreated
NOTIFICATION-TYPE
Indicates that the VPL cross-connection has just been created. When a cross-connection is created along with its VPL endpoints, this trap should be emitted to indicate the creation of the entire group of objects.
1.3.6.1.4.1.353.5.1.3.1.2.0.62current
atmfM4VplXConnDeleted
NOTIFICATION-TYPE
Indicates that the VPL cross-connection has just been deleted. When a cross-connection is deleted along with its VPL endpoints, this trap should be emitted to indicate the deletion of the entire group of objects.
1.3.6.1.4.1.353.5.1.3.1.2.0.63current
atmfM4VclXConnCreated
NOTIFICATION-TYPE
Indicates that the VCL cross-connection has just been created. When a cross-connection is created along with its VCL endpoints, this trap should be emitted to indicate the creation of the entire group of objects.
1.3.6.1.4.1.353.5.1.3.1.2.0.64current
atmfM4VclXConnDeleted
NOTIFICATION-TYPE
Indicates that the VCL cross-connection has just been deleted. When a cross-connection is deleted along with its VCL endpoints, this trap should be emitted to indicate the deletion of the entire group of objects.
1.3.6.1.4.1.353.5.1.3.1.2.0.65current
atmfM4HwUnitCreated
NOTIFICATION-TYPE
Indicates that the specified hardware unit has been installed at the specified location.
1.3.6.1.4.1.353.5.1.3.1.2.0.66current
atmfM4HwUnitDeleted
NOTIFICATION-TYPE
Indicates that the specified hardware unit has been removed or de-installed from the specified location.
1.3.6.1.4.1.353.5.1.3.1.2.0.67current
atmfM4InstalledSwCreated
NOTIFICATION-TYPE
Indicates that the specified software package has been installed.
1.3.6.1.4.1.353.5.1.3.1.2.0.68current
atmfM4InstalledSwDeleted
NOTIFICATION-TYPE
Indicates that the specified software package has been removed.
1.3.6.1.4.1.353.5.1.3.1.2.0.69current
atmfM4IfChanged
NOTIFICATION-TYPE
Indicates that the configuration of the interface has been changed.
1.3.6.1.4.1.353.5.1.3.1.2.0.70current
atmfM4VplTpChanged
NOTIFICATION-TYPE
Indicates that the VPL termination point configuration has been changed.
1.3.6.1.4.1.353.5.1.3.1.2.0.71current
atmfM4VclTpChanged
NOTIFICATION-TYPE
Indicates that the VCL termination point configuration has been changed.
1.3.6.1.4.1.353.5.1.3.1.2.0.72current
atmfM4VplXConnChanged
NOTIFICATION-TYPE
Indicates that the VPL cross-connection configuration has been changed.
1.3.6.1.4.1.353.5.1.3.1.2.0.73current
atmfM4VclXConnChanged
NOTIFICATION-TYPE
Indicates that the VCL cross-connection configuration has been changed.
1.3.6.1.4.1.353.5.1.3.1.2.0.74current
atmfM4HwUnitChanged
NOTIFICATION-TYPE
Indicates that the specified hardware unit configuration has changed.
1.3.6.1.4.1.353.5.1.3.1.2.0.75current
atmfM4InstalledSwChanged
NOTIFICATION-TYPE
Indicates that the specified software package configuration has changed.
1.3.6.1.4.1.353.5.1.3.1.2.0.76current

Conformance

NameOIDStatus
atmfM4General
OBJECT-GROUP
The ATM Forum M4 ATM NE high-level objects.
1.3.6.1.4.1.353.5.1.3.1.3.1.1current
atmfM4PhysPathTpGroup
OBJECT-GROUP
The ATM Forum M4 interface Configuration table extensions for the physical path termination point.
1.3.6.1.4.1.353.5.1.3.1.3.1.2current
atmfM4TcAdapterGroup
OBJECT-GROUP
The ATM Forum M4 interface Configuration table extensions for the TC Adapter.
1.3.6.1.4.1.353.5.1.3.1.3.1.3current
atmfM4AtmLayerGroup
OBJECT-GROUP
The ATM Forum M4 interface Configuration table extensions for the ATM cell layer.
1.3.6.1.4.1.353.5.1.3.1.3.1.4current
atmfM4VplGroup
OBJECT-GROUP
The ATM Forum M4 VPL Termination Point Configuration table extensions.
1.3.6.1.4.1.353.5.1.3.1.3.1.5current
atmfM4VclGroup
OBJECT-GROUP
The ATM Forum M4 VCL Termination Point Configuration table extensions.
1.3.6.1.4.1.353.5.1.3.1.3.1.6current
atmfM4VpXConnGroup
OBJECT-GROUP
The ATM Forum M4 VP Cross-Connect Configuration table extensions.
1.3.6.1.4.1.353.5.1.3.1.3.1.7current
atmfM4VcXConnGroup
OBJECT-GROUP
The ATM Forum M4 VC Cross-Connect Configuration table extensions.
1.3.6.1.4.1.353.5.1.3.1.3.1.8current
atmfM4VpNextVpiGroup
OBJECT-GROUP
The ATM Forum M4 VP Next VPI value table.
1.3.6.1.4.1.353.5.1.3.1.3.1.9current
atmfM4VcNextVciGroup
OBJECT-GROUP
The ATM Forum M4 VC Next VCI value table.
1.3.6.1.4.1.353.5.1.3.1.3.1.10current
atmfM4CellProtoCurrGroup
OBJECT-GROUP
The ATM Forum M4 Cell Protocol Monitoring Current Data table.
1.3.6.1.4.1.353.5.1.3.1.3.1.11current
atmfM4CellProtoHistGroup
OBJECT-GROUP
The ATM Forum M4 Cell Protocol Monitoring History Data table.
1.3.6.1.4.1.353.5.1.3.1.3.1.12current
atmfM4CellProtoErrorGroup
OBJECT-GROUP
The ATM Forum M4 Cell Protocol Monitoring Error Log table.
1.3.6.1.4.1.353.5.1.3.1.3.1.13current
atmfM4TcProtoCurrGroup
OBJECT-GROUP
The ATM Forum M4 TC Adapter Protocol Monitoring Current Data table.
1.3.6.1.4.1.353.5.1.3.1.3.1.14current
atmfM4TcProtoHistGroup
OBJECT-GROUP
The ATM Forum M4 TC Adapter Protocol Monitoring History Data table.
1.3.6.1.4.1.353.5.1.3.1.3.1.15current
atmfM4VpUpcNpcCurrGroup
OBJECT-GROUP
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points.
1.3.6.1.4.1.353.5.1.3.1.3.1.16current
atmfM4VpUpcNpcHistGroup
OBJECT-GROUP
The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points.
1.3.6.1.4.1.353.5.1.3.1.3.1.17current
atmfM4VcUpcNpcCurrGroup
OBJECT-GROUP
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points.
1.3.6.1.4.1.353.5.1.3.1.3.1.18current
atmfM4VcUpcNpcHistGroup
OBJECT-GROUP
The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points.
1.3.6.1.4.1.353.5.1.3.1.3.1.19current
atmfM4VpTestGroup
OBJECT-GROUP
The ATM Forum M4 VP Termination Point Test table.
1.3.6.1.4.1.353.5.1.3.1.3.1.20current
atmfM4VcTestGroup
OBJECT-GROUP
The ATM Forum M4 VC Termination Point Test table.
1.3.6.1.4.1.353.5.1.3.1.3.1.21current
atmfM4EquipGroup
OBJECT-GROUP
The ATM Forum M4 Equipment table.
1.3.6.1.4.1.353.5.1.3.1.3.1.22current
atmfM4EquipHolderGroup
OBJECT-GROUP
The ATM Forum M4 Equipment Holder table.
1.3.6.1.4.1.353.5.1.3.1.3.1.23current
atmfM4PlugInUnitGroup
OBJECT-GROUP
The ATM Forum M4 Plug-In Unit table.
1.3.6.1.4.1.353.5.1.3.1.3.1.24current
atmfM4HwRunningSwGroup
OBJECT-GROUP
The ATM Forum M4 Hardware Unit/Running Software table.
1.3.6.1.4.1.353.5.1.3.1.3.1.25current
atmfM4HwInstalledSwGroup
OBJECT-GROUP
The ATM Forum M4 Hardware Unit/Installed Software table.
1.3.6.1.4.1.353.5.1.3.1.3.1.26current
atmfM4AlarmSevGroup
OBJECT-GROUP
The ATM Forum M4 Alarm handling objects.
1.3.6.1.4.1.353.5.1.3.1.3.1.27current
atmfM4TrapForwardingGroup
OBJECT-GROUP
The ATM Forum M4 Trap forwarding table.
1.3.6.1.4.1.353.5.1.3.1.3.1.28current
atmfM4TrapLogGroup
OBJECT-GROUP
The ATM Forum M4 Trap Agent log table.
1.3.6.1.4.1.353.5.1.3.1.3.1.29current
atmfM4LoggedTrapGroup
OBJECT-GROUP
The ATM Forum M4 Trap Agent logged trap table.
1.3.6.1.4.1.353.5.1.3.1.3.1.30current
atmfM4LoggedAlarmGroup
OBJECT-GROUP
The ATM Forum M4 Trap Agent logged alarm trap table.
1.3.6.1.4.1.353.5.1.3.1.3.1.31current
atmfM4NotificationsGroup
NOTIFICATION-GROUP
The ATM Forum M4 notification list.
1.3.6.1.4.1.353.5.1.3.1.3.1.32current
atmfM4Compliance
MODULE-COMPLIANCE
The compliance statements are listed as a set up conformance units that correspond to each table. Support for all tables is mandatory.
1.3.6.1.4.1.353.5.1.3.1.3.2.1current