MIBs Depot

PDN-ATMM4EXT-MIB

Registered at
1.3.6.1.4.1.1795.2.24.2.6.11.6
Last updated
2001-03-08 00:00
Organization
Paradyne Corporation MIB Working Group
Revisions
2002-08-15 00:00, 2001-03-08 00:00, 2000-09-26 00:00, 2000-09-22 00:00, 2000-09-21 00:00, 2000-09-08 00:00, 2000-06-29 00:00
Namespace
zhone
Source file
PDN-ATMM4EXT-MIB
Digest
sha256:8e48cbba2069483afa6558d9a66f5dc9ca2d4e0e542923ccbdd75f2d14bff871

Description

This MIB Module extends the ATM-FORUM-SNMP-M4-MI defined in the Atm Forums M4 Mib

Contact

Paradyne Corporation 8545 126th Avenue North Largo, FL 33773 www.paradyne.com General Comments to: mibwg_team@eng.paradyne.com

Imports

FromSymbols
ATM-FORUM-SNMP-M4-MIBatmfM4TcProtoCurrEntry, atmfM4TcProtoHistEntry, atmfM4VcTestEntry, atmfM4VpTestEntry
IF-MIBifIndex
PDN-HEADER-MIBpdnAtm
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-FORUM-SNMP-M4-MIB
ATM-MIB
ATM-TC-MIB
ENTITY-MIB
HOST-RESOURCES-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
PDN-ATMM4EXT-MIB
PDN-HEADER-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
PdnAtmfM4TestErrorCode
TEXTUAL-CONVENTION
The specific error codes related to attempting to run a test. The codes have the following meanings: noError(0) -- No Error Occurred badIfIndex(1) -- Specified interface does not exist noVccFound(2) -- The Vcc does not exist on the interface notOwner(3) -- Not the current owner of the test noResourceAvailable(4) -- Device memory allocation failure noLoopbackAllocated(5) -- Could not start the test testCompleted(6) -- Test completed or stopped normally testTimeOut(7) -- Test unsuccessfully due to timeout adminStatusDisabled(8) -- ifAdminStatus is Disabled
current

Objects

NameOIDSyntaxAccessStatus
pdnAtmfM4ExtObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.11.6.1
pdnAtmfM4TcProtoCurrExtTable
OBJECT-TYPE
The Paradyne Extension to the atmfM4TcProtoCurrTable of the ATM-FORUM-SNMP-M4-MIB.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1not-accessiblecurrent
pdnAtmfM4TcProtoCurrExtEntry
OBJECT-TYPE
The Paradyne Extension to the atmfM4TcProtoCurrTable of the ATM-FORUM-SNMP-M4-MIB.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1not-accessiblecurrent
pdnAtmfM4TcProtoCurrCellIns
OBJECT-TYPE
The number of ATM cells received on this interface since the start of this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.1Gauge32read-onlycurrent
pdnAtmfM4TcProtoCurrCellOuts
OBJECT-TYPE
The number of ATM cells sent on this interface since the start of this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.2Gauge32read-onlycurrent
pdnAtmfM4TcProtoCurrInDiscards
OBJECT-TYPE
The number of RX ATM cells dropped on this interface since the start of this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.3Gauge32read-onlycurrent
pdnAtmfM4TcProtoCurrOutDiscards
OBJECT-TYPE
The number of TX ATM cells dropped on this interface since the start of this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.4Gauge32read-onlycurrent
pdnAtmfM4TcProtoCurrLCDEvents
OBJECT-TYPE
The number of Loss of Cell Delineation (LCD) event occurred on this interface since the start of this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.5Gauge32read-onlycurrent
pdnAtmfM4TcProtoCurrUnknownCells
OBJECT-TYPE
The number of unknown Cells received on this interface since the start of this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.6Gauge32read-onlycurrent
pdnAtmfM4TcProtoCurrCorrectedHEC
OBJECT-TYPE
The number of Cell with corrected HEC received on this interface since the start of this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.7Gauge32read-onlycurrent
pdnAtmfM4TcProtoHistExtTable
OBJECT-TYPE
The Paradyne Extension to the atmfM4TcProtoHistTable of the ATM-FORUM-SNMP-M4-MIB.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2not-accessiblecurrent
pdnAtmfM4TcProtoHistExtEntry
OBJECT-TYPE
The Paradyne Extension to the atmfM4TcProtoHistTable of the ATM-FORUM-SNMP-M4-MIB.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1not-accessiblecurrent
pdnAtmfM4TcProtoHistCellIns
OBJECT-TYPE
The number of ATM cells received on this interface during this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.1Gauge32read-onlycurrent
pdnAtmfM4TcProtoHistCellOuts
OBJECT-TYPE
The number of ATM cells sent on this interface during this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.2Gauge32read-onlycurrent
pdnAtmfM4TcProtoHistInDiscards
OBJECT-TYPE
The number of RX ATM cells dropped on this interface during this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.3Gauge32read-onlycurrent
pdnAtmfM4TcProtoHistOutDiscards
OBJECT-TYPE
The number of TX ATM cells dropped on this interface during this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.4Gauge32read-onlycurrent
pdnAtmfM4TcProtoHistLCDEvents
OBJECT-TYPE
The number of Loss of Cell Delineation (LCD) event occurred on this interface during this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.5Gauge32read-onlycurrent
pdnAtmfM4TcProtoHistUnknownCells
OBJECT-TYPE
The number of unknown Cells received on this interface since the start of this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.6Gauge32read-onlycurrent
pdnAtmfM4TcProtoHistCorrectedHEC
OBJECT-TYPE
The number of Cell with corrected HEC received on this interface during this interval
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.7Gauge32read-onlycurrent
pdnAtmfM4TestTypes
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3
pdnAtmfM4TestOAMLoopbackSegMultiCell
OBJECT-IDENTITY
This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using a segment OAM cell. The test type must have appended to it a code that uniquely identifies an intermediate point responsible for looping back the cell. If this is absent, the loopback is performed at the end of the segment or connection. E.g., the OID { pdnAtmfM4TestOAMLoopbackSegMultiCell 5 } identifies that the loopback should be performed at the intermediate point labeled 5.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3.1current
pdnAtmfM4TestOAMLoopbackE2EMultiCell
OBJECT-IDENTITY
This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using an end-to-end OAM cell.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3.2current
pdnAtmfM4VcLoopbackTestTable
OBJECT-TYPE
This table contains input and results for OAM loopback tests. There can be only one test running per ATM VCC This table should be used in conjunction with atmfM4VcTestTable with all the semantics of atmfM4VcTestTable.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4not-accessiblecurrent
pdnAtmfM4VcLoopbackTestEntry
OBJECT-TYPE
An entry containing objects for test results for ATM OAM loopback test
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1not-accessiblecurrent
pdnAtmfM4VcLoopbackTestElpsTime
OBJECT-TYPE
This object contains the time that has elapsed since the test started.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.1TimeTicksread-onlycurrent
pdnAtmfM4VcLoopbackTestCellsSent
OBJECT-TYPE
This object specifies a count of the number of test cells that have been sent. The value of this object stops increasing when it reaches its maximum value.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.2Gauge32read-onlycurrent
pdnAtmfM4VcLoopbackTestCellsRcvd
OBJECT-TYPE
This object specifies a count of the number of test cells that have been received. The value of this object stops increasing when it reaches its maximum value.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.3Gauge32read-onlycurrent
pdnAtmfM4VcLoopbackTestMinRTDelay
OBJECT-TYPE
This object contains the value of the shortest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.4Gauge32read-onlycurrent
pdnAtmfM4VcLoopbackTestMaxRTDelay
OBJECT-TYPE
This object contains the value of the longest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.5Gauge32read-onlycurrent
pdnAtmfM4VcLoopbackTestAvgRTDelay
OBJECT-TYPE
This object contains the value of the average round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.6Gauge32read-onlycurrent
pdnAtmfM4VcLoopbackTestErrorCode
OBJECT-TYPE
This object contains the specific error code on the test result.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.7PdnAtmfM4TestErrorCoderead-onlycurrent
pdnAtmfM4Vc1CellLoopTable
OBJECT-TYPE
This table contains input and results for single cell OAM loopback tests. There can be only one test running per ATM VCC This table should be used in conjunction with atmfM4VcTestTable with all the semantics of atmfM4VcTestTable.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5not-accessiblecurrent
pdnAtmfM4Vc1CellLoopEntry
OBJECT-TYPE
An entry containing objects for test results for a single cell ATM OAM loopback test
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1not-accessiblecurrent
pdnAtmfM4Vc1CellLoopRTDelay
OBJECT-TYPE
This object contains the value of the round trip delay of the the test cell. A value of zero indicates that no cell has been received.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.1Gauge32read-onlycurrent
pdnAtmfM4Vc1CellLoopReportedLocation
OBJECT-TYPE
This object contains the value of the location identifier reported by the received cell.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.2OCTET STRING (SIZE(16))read-onlycurrent
pdnAtmfM4Vc1CellLoopErrorCode
OBJECT-TYPE
This object contains the specific error code on the test result.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.3PdnAtmfM4TestErrorCoderead-onlycurrent
pdnAtmfM4LoopbackLocationTable
OBJECT-TYPE
This table contains the ATM OAM loopback location codes for ATM cell layer interfaces.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6not-accessiblecurrent
pdnAtmfM4LoopbackLocationEntry
OBJECT-TYPE
An entry containing objects for ATM OAM loopback locations.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1not-accessiblecurrent
pdnAtmfM4LoopbackLocationCode
OBJECT-TYPE
This object contains the value of ATM OAM Loopback Location Code
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1.1OCTET STRING (SIZE(16))read-writecurrent
pdnAtmfM4VpLoopbackTestTable
OBJECT-TYPE
This table contains input and results for OAM loopback tests. There can be only one test running per ATM VPC This table should be used in conjunction with atmfM4VpTestTable with all the semantics of atmfM4VpTestTable.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7not-accessiblecurrent
pdnAtmfM4VpLoopbackTestEntry
OBJECT-TYPE
An entry containing objects for test results for ATM OAM loopback test
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1not-accessiblecurrent
pdnAtmfM4VpLoopbackTestElpsTime
OBJECT-TYPE
This object contains the time that has elapsed since the test started.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.1TimeTicksread-onlycurrent
pdnAtmfM4VpLoopbackTestCellsSent
OBJECT-TYPE
This object specifies a count of the number of test cells that have been sent. The value of this object stops increasing when it reaches its maximum value.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.2Gauge32read-onlycurrent
pdnAtmfM4VpLoopbackTestCellsRcvd
OBJECT-TYPE
This object specifies a count of the number of test cells that have been received. The value of this object stops increasing when it reaches its maximum value.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.3Gauge32read-onlycurrent
pdnAtmfM4VpLoopbackTestMinRTDelay
OBJECT-TYPE
This object contains the value of the shortest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.4Gauge32read-onlycurrent
pdnAtmfM4VpLoopbackTestMaxRTDelay
OBJECT-TYPE
This object contains the value of the longest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.5Gauge32read-onlycurrent
pdnAtmfM4VpLoopbackTestAvgRTDelay
OBJECT-TYPE
This object contains the value of the average round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.6Gauge32read-onlycurrent
pdnAtmfM4VpLoopbackTestErrorCode
OBJECT-TYPE
This object contains the specific error code on the test result.
1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.7PdnAtmfM4TestErrorCoderead-onlycurrent
pdnAtmfM4ExtTraps
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.11.6.2
pdnAtmfM4ExtTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.11.6.2.0
pdnAtmfM4ExtConformance
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.11.6.3
pdnAtmfM4Groups
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1
pdnAtmfM4Compliances
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.2

Conformance

NameOIDStatus
pdnAtmfM4TcCurrGroup
OBJECT-GROUP
The objects in the ATM TC layer current table.
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.1current
pdnAtmfM4TcHistGroup
OBJECT-GROUP
The objects in the ATM TC layer history table.
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.2current
pdnAtmfM4VcLoopbackTestGroup
OBJECT-GROUP
The objects in the ATM OAM Loopback Test (multiple cell) table for ATM VCC.
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.3current
pdnAtmfM4Vc1CellLoopGroup
OBJECT-GROUP
The objects in the ATM Single Cell OAM Loopback Test table.
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.4current
pdnAtmfM4LoopbackLocationGroup
OBJECT-GROUP
The objects in the ATM Loopback Location table.
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.5current
pdnAtmfM4VpLoopbackTestGroup
OBJECT-GROUP
The objects in the ATM OAM Loopback Test (multiple cell) table for ATM VPC.
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.6current
pdnAtmfM4Compliance
MODULE-COMPLIANCE
The compliance statement for SNMP entities which support the ATM M4 extensions.
1.3.6.1.4.1.1795.2.24.2.6.11.6.3.2.1current